National Library of Energy BETA

Sample records for resources print text

  1. Printing a Car: A Team Effort in Innovation (Text Version) |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Printing a Car: A Team Effort in Innovation (Text Version) Printing a Car: A Team Effort in Innovation (Text Version) Below is the text version of the video Printing a Car: A Team ...

  2. Next Generation Lunch: Revealing the World's First 3D Printed Car (text

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    version) | Department of Energy Next Generation Lunch: Revealing the World's First 3D Printed Car (text version) Next Generation Lunch: Revealing the World's First 3D Printed Car (text version) Below is the text version for the Next Generation Lunch: Revealing the World's First 3D Printed Car Video. FILE NAME: AEMC_09172014_luncheonaddress_nextgeneration SPEAKER: Ladies and gentleman, welcome and good afternoon. Please give a warm welcome to Dr. Mark Johnson, U.S. Department of Energy.

  3. Assessing Energy Resources Webinar Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Text Version Assessing Energy Resources Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on assessing energy resources. DOE Office of Indian Energy Foundational Course on Renewable Energy Technologies: Assessing Energy Resources Text Version (162.06 KB) More Documents & Publications TAP Webcast Transcript July-29, 2009 webinar_innovation_permitting_inspections.doc Community Energy Strategic Planning Resources

  4. DOE Human Resources Management Division - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    About Hanford Cleanup Hanford History Hanford Site Wide Programs DOE Human Resources ... DOE Human Resources Management Division Email Email Page | Print Print Page | Text ...

  5. Cultural Resource Program and Curation Services - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Safety and Resource Protection (PSRP) Cultural Resource Program and Curation Services Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection Home Cultural Resource Program and Curation Services Ecological Monitoring Environmental Surveillance Meteorology and Climatology Services Seismic Monitoring Cultural Resource Program and Curation Services Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Cultural Resource Program and

  6. Public Safety and Resource Protection - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection Home Cultural Resource Program and Curation Services Ecological Monitoring Environmental Surveillance Meteorology and Climatology Services Seismic Monitoring Public Safety and Resource Protection Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Public Safety and Resource Protection The Mission

  7. Text-Alternative Webcast of the National Training and Education Resource (NTER)

    Energy.gov [DOE]

    MICHELLE FOX: Hi, welcome everyone. I wanted to say thank you for joining our webinar on the National Training and Education Resource. I would like to begin with some quick Introductions.  I am...

  8. DOE ZERH Webinar: Technical Resources: Building America Solution Center (Text Version)

    Energy.gov [DOE]

    Below is the text version of the webinar, DOE Zero Energy Ready Home: Building America Solution Center, presented in April 2014. Watch the presentation.

  9. SciTech Connect: "3d printing"

    Office of Scientific and Technical Information (OSTI)

    3d printing" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "3d printing" Semantic Semantic Term Title: Full Text: Bibliographic Data: Creator ...

  10. TEXAS LPG FUEL CELL DEVELOPMENT AND DEMONSTRATION PROJECT Full-Text - Submission contains both citation data and full-text of the journal article. Full-text can be either a pre-print or post-print, but not the copyrighted article.

    SciTech Connect

    SOUTHWEST RESEARCH LABORATORY SUBMITTED BY SUBCONTRACTOR, RAILROAD COMMISSION OF TEXAS

    2004-07-26

    The State Energy Conservation Office has executed its first Fuel Cell Project which was awarded under a Department of Energy competitive grant process. The Texas LPG Fuel Processor Development and Fuel Cell Demonstration Program is a broad-based public/private partnership led by the Texas State Energy Conservation Office (SECO). Partners include the Alternative Fuels Research and Education Division (AFRED) of the Railroad Commission of Texas; Plug Power, Inc., Latham, NY, UOP/HyRadix, Des Plaines, IL; Southwest Research Institute (SwRI), San Antonio, TX; the Texas Natural Resource Conservation Commission (TNRCC), and the Texas Department of Transportation (TxDOT). The team proposes to mount a development and demonstration program to field-test and evaluate markets for HyRadix?s LPG fuel processor system integrated into Plug Power?s residential-scale GenSys 5C (5 kW) PEM fuel cell system in a variety of building types and conditions of service. The program?s primary goal is to develop, test, and install a prototype propane-fueled residential fuel cell power system supplied by Plug Power and HyRadix in Texas. The propane industry is currently funding development of an optimized propane fuel processor by project partner UOP/HyRadix through its national checkoff program, the Propane Education and Research Council (PERC). Following integration and independent verification of performance by Southwest Research Institute, Plug Power and HyRadix will produce a production-ready prototype unit for use in a field demonstration. The demonstration unit produced during this task will be delivered and installed at the Texas Department of Transportation?s TransGuide headquarters in San Antonio, Texas. Simultaneously, the team will undertake a market study aimed at identifying and quantifying early-entry customers, technical and regulatory requirements, and other challenges and opportunities that need to be addressed in planning commercialization of the units. For further

  11. Hanford Natural Resource Trustee Council - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Council About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Hanford Natural Resource Trustee Council HNRTC Members HNRTC History & Accomplishments Contact Us Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The Hanford Natural Resource Trustee Council is a collaborative working group chartered to address natural resources impacted by Hanford Site releases of hazardous substances. The objectives of the NRTC are: White Bluffs To help ensure

  12. Hanford Natural Resource Trustees - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Members About Us Hanford Natural Resource Trustee Council HNRTC Members HNRTC History & Accomplishments Hanford Natural Resource Trustees Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size US Department of Energy - www.hanford.gov Primary Representative: Tom Post - (509) 376-3232 Fish and Wildlife Service - www.fws.gov Primary Representative: Tammy Ash - 509.893.8033 Alternate Representative: vacant Nez Perce Tribe - http://www.nezperce.org/~erwm/ Primary

  13. Hanford Natural Resource Trustee Council History & Accomplishments -

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Hanford Site History & Accomplishments About Us Hanford Natural Resource Trustee Council HNRTC Members HNRTC History & Accomplishments Memorandum of Agreement By-Laws Hanford Natural Resource Trustee Council History & Accomplishments Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The first organizational meeting for the NRTC was held in Richland, WA, April 9, 1993, at the invitation of the U.S. Department of Energy - Richland Operations Office

  14. Printing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Printing Printing The Printing Team is the liaison between the U.S. Government Printing Office and the Department of Energy. It consists of an expert group of printing specialists who offer a full range of services from assistance in developing your printing requirements to the final printing, distribution and mailing of products. The printed products range from black and white to full color items. These Services are available through the Working Capital Fund or CID (Direct Charge

  15. Texas/Wind Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    TexasWind Resources < Texas Jump to: navigation, search Print PDF Print Full Version WIND ENERGY STAKEHOLDER ENGAGEMENT & OUTREACHSmall Wind Guidebook OpenEI Home >> Wind >> Small...

  16. Utah/Wind Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    UtahWind Resources < Utah Jump to: navigation, search Print PDF Print Full Version WIND ENERGY STAKEHOLDER ENGAGEMENT & OUTREACHSmall Wind Guidebook OpenEI Home >> Wind >>...

  17. Type C: Caldera Resource | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    C: Caldera Resource Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Type C: Caldera Resource Dictionary.png Type C: Caldera Resource: No definition has been...

  18. Community Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Community Resources Bioimaging Technology Bioimaging Technology Home Research Funding Opportunities Community Resources Contact BER Home Community Resources Print Text Size: A A A FeedbackShare Page BER Imaging and Measurement Cover Program Brochure .pdf file (5.2MB) This brochure outlines the pilot projects at the DOE national laboratories and the investigators leading these efforts. This initial description of BER's new effort serves as an informational resource for the evolving imaging and

  19. User Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources User Facilities User Facilities Home User Facilities at a Glance User Resources Getting Started User Safety Access Models User Agreements Data Management Resources Acknowledging User Facilities User Statistics Policies and Processes Frequently Asked Questions User Facility Science Highlights User Facility News Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 User Resources Print Text Size: A A A

  20. World's First Printed Car

    SciTech Connect

    Rogers, Jay

    2015-06-03

    Local Motors partnered with ORNL to print the world’s first 3D-printed car (Strati) at the 2014 International Manufacturing Technology Show.

  1. Resources

    Energy.gov [DOE]

    Case studies and additional resources on implementing renewable energy in Federal new construction and major renovations are available.

  2. Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Resources Policies, Manuals & References Map Transportation Publications ⇒ Navigate Section Resources Policies, Manuals & References Map Transportation Publications Getting Help or Information askUS - Operations Unified Services Portal IT Help Desk (or call x4357) Facilities Work Request Center Telephone Services Travel Site Info Laboratory Map Construction Updates Laboratory Shuttle Buses Cafeteria Menu News and Events Today at Berkeley Lab News Center Press Releases Feature

  3. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Argonne Site Office (ASO) ASO Home About Projects Contract Management NEPA Documents Resources Contact Information Argonne Site Office U.S. Department of Energy 9800 South Cass Avenue Building 201 Argonne, IL 60439 P: (630) 252-8637 Resources Print Text Size: A A A FeedbackShare Page Community Leaders Round Table The Argonne National Laboratory/U.S. Department of Energy Community Leaders Round Table provides an informal and convenient forum for sharing information about Argonne plans

  4. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Berkeley Site Office (BSO) BSO Home About Projects Contract Management NEPA Documents Resources Contact Information Berkeley Site Office U.S. Department of Energy One Cyclotron Road Berkeley, CA 94720 P: (510) 486-5784 E: Email Us Resources Print Text Size: A A A FeedbackShare Page American Recovery and Reinvestment Act of 2009 (ARRA) at Lawrence Berkeley National Laboratory External link DOE National Telephone Directory DOE Jobs USA.GOV External link ( The U.S. Government's Official

  5. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Grants & Contracts Support Grants & Contracts Support Home About Funding Opportunity Announcements (FOAs) DOE National Laboratory Announcements Grants Process Grants Policy and Guidance FAQs Resources Contract Information Contact Information Grants & Contracts Support U.S. Department of Energy SC-43/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us Resources Print Text Size: A A A FeedbackShare Page Website About Grants.gov External link A

  6. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Thomas Jefferson Site Office (TJSO) TJSO Home About Projects Contract Management NEPA Documents Resources Contact Information Thomas Jefferson Site Office U.S. Department of Energy 12000 Jefferson Avenue Newport News, VA 23606 P: (757) 269-7140 Resources Print Text Size: A A A FeedbackShare Page Links Visiting TJSO External link Documents ASER 2015 TJSO Annual Site Environmental Report .pdf file (2.4MB) Last modified: 9/28/2016 5:22:26

  7. Community Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Community Resources Biological and Environmental Research (BER) BER Home About Research Facilities Science Highlights Benefits of BER Funding Opportunities Biological & Environmental Research Advisory Committee (BERAC) Community Resources Contact Information Biological and Environmental Research U.S. Department of Energy SC-23/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3251 F: (301) 903-5051 E: Email Us More Information » Community Resources Print Text

  8. Community Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Community Resources High Energy Physics (HEP) HEP Home About Research Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees Community Resources Featured Content Reports Contact Information High Energy Physics U.S. Department of Energy SC-25/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3624 F: (301) 903-2597 E: Email Us More Information » Community Resources Print Text Size: A A A FeedbackShare Page Featured Content

  9. Compact organic vapor jet printing print head

    DOEpatents

    Forrest, Stephen R; McGraw, Gregory

    2013-12-24

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print header further includes a first layer comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  10. Compact organic vapor jet printing print head

    DOEpatents

    Forrest, Stepehen R; McGraw, Gregory

    2015-01-27

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print head further includes a first layer further comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  11. Contractor Human Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contractor Human Resources Integrated Support Center (ISC) ISC Home About Services Freedom of Information Act (FOIA) Privacy Act NEPA Documents Contact Information Integrated Support Center Roxanne Purucker U.S. Department of Energy 9800 S. Cass Avenue Argonne, IL 60439 P: (630) 252-2110 Kenneth Tarcza U.S. Department of Energy 200 Administration Road Oak Ridge, TN 37830 P: (865) 576-4444 Services Contractor Human Resources Print Text Size: A A A FeedbackShare Page Contractor Human Resources

  12. Suitability for 3D Printed Parts for Laboratory Use

    SciTech Connect

    Zwicker, Andrew P.; Bloom, Josh; Albertson, Robert; Gershman, Sophia

    2014-08-01

    3D printing has become popular for a variety of users, from industrial to the home hobbyist, to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory and is equally suitable for producing equipment for advanced undergraduate laboratories.

  13. Printing Tiny Batteries | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    "Printing" Tiny Batteries? Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 06.26.13 Stories of Discovery & Innovation: "Printing" Tiny Batteries? Print Text Size: A A A Subscribe FeedbackShare Page Researchers use sophisticated 3D printing techniques to create batteries the size of a grain of sand. This work, featured in the Office of

  14. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Brookhaven Site Office (BHSO) BHSO Home About Projects Contract Management NEPA Documents Resources Contact Information Brookhaven Site Office U.S. Department of Energy PO Box 5000 Upton, NY 11973 P: (631) 344-3425 E: Email Us Resources Print Text Size: A A A FeedbackShare Page On April 18, 2013, the U.S. Department of Energy (DOE) announced its plan to begin competing the management and operating (M&O) contract for the Brookhaven National Laboratory over the next 20 months.

  15. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Fermi Site Office (FSO) FSO Home About Projects Contract Management NEPA Documents Resources Contact Information Fermi Site Office U.S. Department of Energy MS 118 P.O. Box 2000 Kirk Road and Pine Street Batavia, IL 60510 P: (630) 840-3281 F: (630) 840-3285 Resources Print Text Size: A A A FeedbackShare Page Virtual Contract Management Team The Site Office operates as a virtual contract management team working to provide the necessary information to ensure that the Contracting Officers

  16. Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Pacific Northwest Site Office (PNSO) PNSO Home About Projects Contract Management NEPA Documents Resources Contact Information Pacific Northwest Site Office U.S. Department of Energy P.O. Box 350, MS K9-42 Richland, WA 99352 P: (509) 372-4005 Resources Print Text Size: A A A FeedbackShare Page Contact Pacific Northwest Site Office P.O. Box 350, MS K9-42 Richland, WA 99352 (509) 372-4005 Public Affairs Jacob A. Skeels (509) 372-4365 Email: jacob.skeels@science.doe.gov Links

  17. Organic vapor jet printing system

    DOEpatents

    Forrest, Stephen R.

    2016-05-03

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  18. Organic vapor jet printing system

    DOEpatents

    Forrest, Stephen R

    2012-10-23

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  19. Jefferson Lab Information Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Archives FAQ Search Online Catalog print version Services Search Online Catalog Subject Pathfinders Databases E-Books Online Journals Print Journals/Backfiles Interlibrary Loan Request Additional Resources Library Information Location and Hours Staff Circulation Policy Lab Libraries Give us your Feedback AVS Historical Book Collection Whats New ! Mobile Catalog Access Cryocooler fundamentals and space applications course notes AIP Digital Archives Applied Physics Letters Journal of Applied

  20. Deputy Director for Resource Management Homepage | U.S. DOE Office of

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science (SC) Home Deputy Director for Resource Management Deputy Director Home Mission & Functions Deputy Director Biography Organization Contact Information Deputy Director for Resource Management U.S. Department of Energy SC-4/Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-9776 F: (202) 586-4120 E: Email Us Print Text Size: A A A FeedbackShare Page This Office plans, develops, manages, and implements a central management policy support program that

  1. Government Printing Office Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Government Printing Office Requirements Government Printing Office Requirements This section describes the Government Printing Office (GPO) requirements for all print materials, whether printed electronically or on paper. This includes requirements for printing and copying for all EERE publications. Approved Printers Executive Order 12873, signed by President Clinton, requires that all government offices and their contractors are required to use GPO-approved printers to print and copy all

  2. Sintering Kinetics of Inkjet Printed...

    Office of Scientific and Technical Information (OSTI)

    circuits for functional applications envisioned by automotive and aerospace industries. ... Figure 1 illustrates the types of printed line instabilities generally encountered when ...

  3. Biomass Webinar Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Text Version Biomass Webinar Text Version Dowload the text version of the audio from the DOE Office of Indian Energy webinar on biomass. DOE Office of Indian Energy Foundational Course Webinar on Biomass: Text Version (153.94 KB) More Documents & Publications Biomass Webinar Presentation Slides Assessing Energy Resources Webinar Text Version Transcript: Biomass Clean Cities Webinar - Workforce Development

  4. Human Resources | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Human Resources Integrated Support Center (ISC) ISC Home About Services Freedom of Information Act (FOIA) Privacy Act NEPA Documents Contact Information Integrated Support Center Roxanne Purucker U.S. Department of Energy 9800 S. Cass Avenue Argonne, IL 60439 P: (630) 252-2110 Kenneth Tarcza U.S. Department of Energy 200 Administration Road Oak Ridge, TN 37830 P: (865) 576-4444 Services Human Resources Print Text Size: A A A FeedbackShare Page Related Links Forms External link Office of Chief

  5. Template:PrintPDFButton | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    PrintPDFButton Jump to: navigation, search This is the PrintPDFButton template. It is intended for inclusion on any page where printing the page contents to a PDF is desirable....

  6. Widget:PrintPDFButton | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Dependencies Template:PrintPDFButton Usage This Widget assumes the existence of HTML elements created by the PrintPDFButton template, and is called via that template....

  7. Pennsylvania Company Develops Solar Cell Printing Technology

    Energy.gov [DOE]

    The technology uses Plextronics’ conductive inks that can be printed by manufacturers worldwide to make solar cells, potentially as easily as they might print a newspaper.

  8. SolarPrint | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search Name: SolarPrint Place: Dublin, Ireland Sector: Solar Product: Irish solar cell manufacturer. The company developed DSSC technology. References: SolarPrint1 This...

  9. printed-circuit heat exchanger PCHE

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    printed-circuit heat exchanger PCHE - Sandia Energy Energy Search Icon Sandia Home ... SunShot Grand Challenge: Regional Test Centers printed-circuit heat exchanger PCHE Home...

  10. Public Law 102-392 for Printing | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing (118.61 KB) More Documents & Publications Minutes from the Print ...

  11. Printed Module Interconnects

    SciTech Connect

    Stockert, Talysa R.; Fields, Jeremy D.; Pach, Gregory F.; Mauger, Scott A.; van Hest, Maikel F. A. M.

    2015-06-14

    Monolithic interconnects in photovoltaic modules connect adjacent cells in series, and are typically formed sequentially involving multiple deposition and scribing steps. Interconnect widths of 500 um every 10 mm result in 5% dead area, which does not contribute to power generation in an interconnected solar panel. This work expands on previous work that introduced an alternative interconnection method capable of producing interconnect widths less than 100 um. The interconnect is added to the module in a single step after deposition of the photovoltaic stack, eliminating the need for scribe alignment. This alternative method can be used for all types of thin film photovoltaic modules. Voltage addition with copper-indium-gallium-diselenide (CIGS) solar cells using a 2-scribe printed interconnect approach is demonstrated. Additionally, interconnect widths of 250 um are shown.

  12. Solar Webinar Text Version

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download the text version of the audio from the DOE Office of Indian Energy webinar on solar renewable energy.

  13. Detection of latent prints by Raman imaging

    DOEpatents

    Lewis, Linda Anne; Connatser, Raynella Magdalene; Lewis, Sr., Samuel Arthur

    2011-01-11

    The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

  14. OSTIblog Articles in the e-prints Topic | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information e-prints Topic Get scientific e-prints by Dennis Traylor 31 Aug, 2012 in Products and Content 4267 EPN_slide2.jpg Get scientific e-prints Read more about 4267 The E-print Network provides a vast, integrated network of electronic scientific and technical information created by scientists and research engineers active in their respective fields, all full-text searchable. Documents such as these are the means by which today's scientists and researchers

  15. MDF Overview (Text Version)

    Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) overview video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  16. Add your e-prints to the E-print Network -- Energy, science,...

    Office of Scientific and Technical Information (OSTI)

    Add E-prints: eprintshelp@osti.gov We invite you to submit your e-prints to the network. Having your e-prints in the network increases awareness of them and promotes the ...

  17. Full Text Glossary

    Office of Energy Efficiency and Renewable Energy (EERE)

    The full-text glossary includes terms used throughout the website and in Biomass Program publications. Terms are listed alphabetically for easy reference. The term index lists all of the terms defined in the glossary.

  18. Minutes from the Print and Mail Managers Exchange Forum Teleconference...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail...

  19. The United States Code - Printing, Title 44 Excerpts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts PDF icon The United ...

  20. High resolution printing of charge

    DOEpatents

    Rogers, John; Park, Jang-Ung

    2015-06-16

    Provided are methods of printing a pattern of charge on a substrate surface, such as by electrohydrodynamic (e-jet) printing. The methods relate to providing a nozzle containing a printable fluid, providing a substrate having a substrate surface and generating from the nozzle an ejected printable fluid containing net charge. The ejected printable fluid containing net charge is directed to the substrate surface, wherein the net charge does not substantially degrade and the net charge retained on the substrate surface. Also provided are functional devices made by any of the disclosed methods.

  1. Printing a Car: A Team Effort in Innovation | Department of Energy

    Energy Saver

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. text version Media Coverage of the IMTS Event ...

  2. Heat sinking for printed circuitry

    DOEpatents

    Wilson, S.K.; Richardson, G.; Pinkerton, A.L.

    1984-09-11

    A flat pak or other solid-state device mounted on a printed circuit board directly over a hole extends therethrough so that the bottom of the pak or device extends beyond the bottom of the circuit board. A heat sink disposed beneath the circuit board contacts the bottom of the pak or device and provides direct heat sinking thereto. Pressure may be applied to the top of the pak or device to assure good mechanical and thermal contact with the heat sink.

  3. Dominion Resources, Inc. Video (Text Version) | Department of...

    Energy.gov [DOE] (indexed site)

    Andrew F.: My wife's car broke down last summer and we were in the market for a new car. We live about thirty miles or so away from our work locations and we were looking for a car ...

  4. OSTI's E-print Network continues rapid growth | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information Office of Scientific & Technical Information NEWS MEDIA CONTACT: Cathey Daniels, (865) 576-9539 FOR IMMEDIATE RELEASE January 17, 2006 OSTI's E-print Network continues rapid growth Created by scientists for scientists, expanded 39 percent in past year Oak Ridge, TN - The E-print Network (www.osti.gov/eprints), a communications hub created by scientists for scientists worldwide, currently provides full-text searching of more than 730,000

  5. Processing a printed wiring board by single bath electrodeposition

    DOEpatents

    Meltzer, Michael P.; Steffani, Christopher P.; Gonfiotti, Ray A.

    2010-12-07

    A method of processing a printed wiring board. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from a bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  6. Processing A Printed Wiring Board By Single Bath Electrodeposition

    DOEpatents

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2003-04-15

    A method of processing a printed wiring board by single bath electrodeposition. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from the bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  7. Toppan Printing Co Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Co Ltd Jump to: navigation, search Name: Toppan Printing Co Ltd Place: Tokyo, Tokyo, Japan Zip: 101-0024 Product: Japanese manufacturer of PV module backsheets. Coordinates:...

  8. Mac OS X Printing with LPD

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mac OS X Printing with LPD Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "System Preferences", click on "Print & Fax" 2 . Click on "+" sign to add a new printer 3. Use "IP Printer" and select or type the following: Protocol: Line Printer Daemon - LPD Address: printserv.slac.stanford.edu Queue: Your print queue name from SLAC printserv. PLEASE NOTE: this information can be found at the bottom of this document Under "SSRL beamline print

  9. Printing and Mail Managers Exchange Forum Teleconference

    Office of Environmental Management (EM)

    ... Streamlining the acquisition process; e. Developing best practices in print management; f. Assisting in behavioral changes through improved data collection and analysis; g. Driving ...

  10. Printed circuit dispersive transmission line

    DOEpatents

    Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

    1991-08-27

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

  11. Printed circuit dispersive transmission line

    DOEpatents

    Ikezi, Hiroyuki; Lin-Liu, Yuh-Ren; DeGrassie, John S.

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  12. Print

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    maneras fciles de usar energa en forma inteligente Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energtica. Desenchufa los cargadores...

  13. Print

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energtica. Desenchufa los cargadores cuando no estn en uso. Usa luz natural, calor del ...

  14. Print

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    GFDL GCM Model Output with ARM CMBE Dataset: A First Look Jean-Christophe Golaz, UCAR VSP, GFDL Leo J. Donner and V. Ramaswamy, Geophysical Fluid Dynamics Laboratory, Princeton, NJ U . S . D E P A R T M E NT O F C O M M E R C E N A TION A L O C E A N I C A N D A T MO S P H E R I C A D M I N I S T R ATIO N What is CMBE? - CMBE (Climate Modeling Best Estimate) is a new ARM dataset specifically designed to evaluate climate models against ARM observations. - CMBE contains best estimates of selected

  15. Print

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5k 0 < 50k < 100k < 250k < 500k < 1M > 1M > 5M > 10M DE MD DC MA RI NJ AZ UT WY ID OR WA CA TX OK KS CO NE SD ND MN WI IL IA MO AR LA MS AL FL GA TN KY IN OH MI ME NH CT VT NY PA WV VA NC SC MT AK HI NV NM Princeton Plasma Physics Laboratory Procured Materials and Services 2015 (> $35M) Small business procurements in US: $14.73M

  16. E-print Network : Main View : Deep Federated Search

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    javascript. Home About Contact Us Help E-print Network Search Powered By Deep Web Technologies New Search Preferences E-print Network E-print Network Skip to main content FAQ *...

  17. Template:PrintFullVersionButton | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    PrintFullVersionButton Jump to: navigation, search This is the PrintFullVersionButton template. It is intended for inclusion on any page where the printing of a superset of pages...

  18. Over 5 million scientific e-prints at E-print network | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information 5 million scientific e-prints at E-print network Back to the OSTI News Listing for 2008 Now you can access more than 5 million e-prints at OSTI's E-print Network. The rapidly growing gateway to over 27,850 scientific Web sites and databases worldwide allows free one-stop searching of scientific and technical information created by scientists and research engineers active in their respective fields. E-prints are available in basic and

  19. Search 1.1 million scientific e-prints at OSTI's E-print Network | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information 1.1 million scientific e-prints at OSTI's E-print Network Back to the OSTI News Listing for 2007 The network created by scientists for scientists continues to grow. E-print Network provides electronic access to more than 27,000 Web sites and databases worldwide containing 1.1 million e-prints in basic and applied sciences. E-prints are scientific or technical documents circulated electronically to facilitate peer exchange and

  20. Manhattan Project Historical Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project » Manhattan Project Historical Resources Manhattan Project Historical Resources New! Manhattan Project National Historical Park New! K-25 Virtual Museum The Department of Energy has developed and made available to the public--in print, online, and on display--a variety of Manhattan Project historical resources. These include histories, websites, reports and document collections, and exhibits and tours. Histories produced by the Department include The Manhattan Project, which provides a

  1. Minutes from the March 17, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    March 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-eight individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial Printing Report "JCP Form

  2. Minutes from the May 26, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP

  3. Text analysis methods, text analysis apparatuses, and articles of manufacture

    DOEpatents

    Whitney, Paul D; Willse, Alan R; Lopresti, Charles A; White, Amanda M

    2014-10-28

    Text analysis methods, text analysis apparatuses, and articles of manufacture are described according to some aspects. In one aspect, a text analysis method includes accessing information indicative of data content of a collection of text comprising a plurality of different topics, using a computing device, analyzing the information indicative of the data content, and using results of the analysis, identifying a presence of a new topic in the collection of text.

  4. Print-based Manufacturing of Integrated, Low Cost, High Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Lead ...

  5. Department of Energy Strategic Plan, May 2011, Print Quality...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Strategic Plan, May 2011, Print Quality Department of Energy Strategic Plan, May 2011, Print Quality Posted here are publication materials related to the ...

  6. Transfer Printed Microcells with Micro-Optic Concentrators for...

    Office of Scientific and Technical Information (OSTI)

    Transfer Printed Microcells with Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules Citation Details In-Document Search Title: Transfer Printed...

  7. Unitech Printed Circuit Board Corp UPCB | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sector: Solar Product: Taiwan-based printed-circuit board maker with intent to enter into solar cell manufacturing industry. References: Unitech Printed Circuit Board Corp....

  8. Text analysis devices, articles of manufacture, and text analysis methods

    DOEpatents

    Turner, Alan E; Hetzler, Elizabeth G; Nakamura, Grant C

    2013-05-28

    Text analysis devices, articles of manufacture, and text analysis methods are described according to some aspects. In one aspect, a text analysis device includes processing circuitry configured to analyze initial text to generate a measurement basis usable in analysis of subsequent text, wherein the measurement basis comprises a plurality of measurement features from the initial text, a plurality of dimension anchors from the initial text and a plurality of associations of the measurement features with the dimension anchors, and wherein the processing circuitry is configured to access a viewpoint indicative of a perspective of interest of a user with respect to the analysis of the subsequent text, and wherein the processing circuitry is configured to use the viewpoint to generate the measurement basis.

  9. How We 3D-Print Aerogel

    SciTech Connect

    2015-04-23

    A new type of graphene aerogel will make for better energy storage, sensors, nanoelectronics, catalysis and separations. Lawrence Livermore National Laboratory researchers have made graphene aerogel microlattices with an engineered architecture via a 3D printing technique known as direct ink writing. The research appears in the April 22 edition of the journal, Nature Communications. The 3D printed graphene aerogels have high surface area, excellent electrical conductivity, are lightweight, have mechanical stiffness and exhibit supercompressibility (up to 90 percent compressive strain). In addition, the 3D printed graphene aerogel microlattices show an order of magnitude improvement over bulk graphene materials and much better mass transport.

  10. Aluminum plasmonic metamaterials for structural color printing

    DOE PAGES [OSTI]

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-05-26

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  11. CEMI Industrial Efficiency (text version)

    Energy.gov [DOE]

    Below is the text version for the Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video.  

  12. E-print Network Alert Service

    Office of Scientific and Technical Information (OSTI)

    Website Policies and Important Links E-print Web Log alert image About Search Browse by ... and engineering databases and Web sites, based on a search profile you submit to us. ...

  13. E-print Network : User Account

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

  14. Text analysis devices, articles of manufacture, and text analysis methods

    DOEpatents

    Turner, Alan E; Hetzler, Elizabeth G; Nakamura, Grant C

    2015-03-31

    Text analysis devices, articles of manufacture, and text analysis methods are described according to some aspects. In one aspect, a text analysis device includes a display configured to depict visible images, and processing circuitry coupled with the display and wherein the processing circuitry is configured to access a first vector of a text item and which comprises a plurality of components, to access a second vector of the text item and which comprises a plurality of components, to weight the components of the first vector providing a plurality of weighted values, to weight the components of the second vector providing a plurality of weighted values, and to combine the weighted values of the first vector with the weighted values of the second vector to provide a third vector.

  15. Field Facilities Contacts for Printing and Mail | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Field Facilities Contacts for Printing and Mail Field Facilities Contacts for Printing and Mail This is the list of DOE field facilities contacts for Printing and Mail as of April 27, 2011. Go to Mail Services Go to Printing Services Field_Facilities_Contacts_Print-Mail.pdf (74.45 KB) More Documents & Publications Director's Perspective by George Miller Tenant Education and Training Fire Safety Committee Membership List

  16. Minutes from the Print and Mail Managers Exchange Forum Teleconferences |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences. Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions. Last updated 01/30/14 Minutes from the November 21, 2013 Printing and Mail Teleconference (8.88 KB) Minutes from the September 19, 2013 Printing and Mail

  17. Minutes from the January 19, 2011 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence

  18. Minutes from the January 20, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    , 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff,

  19. Minutes from the July 21, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    July 21, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Government Printing Office revisions to the Standard Form one (SF!), Twenty-five

  20. Wind Career Map Text Version | Department of Energy

    Energy.gov [DOE] (indexed site)

    Below is the text version for the Wind Career Map. The application includes five fields of ... All jobs link to the Wind Energy Career Map: Resource List and the Frequently Asked ...

  1. text | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Contributor 17 September, 2013 - 12:39 Are you willing to reply to a text message once a day with information about your comfort level at your indoor location? building...

  2. Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version

    Alternative Fuels and Advanced Vehicles Data Center

    Natural Gas Printable Version Share this resource Send a link to Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version to someone by E-mail Share Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Facebook Tweet about Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Twitter Bookmark Alternative Fuels Data Center: CNG Vehicle Fueling Animation Text Version on Google Bookmark Alternative Fuels Data Center: CNG Vehicle

  3. Understanding the Properties of High Tech Gels Used in 3-D Printing | U.S.

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOE Office of Science (SC) Understanding the Properties of High Tech Gels Used in 3-D Printing Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) Community Resources Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3081 F: (301) 903-6594 E: Email Us More Information »

  4. Nozzle geometry for organic vapor jet printing

    DOEpatents

    Forrest, Stephen R; McGraw, Gregory

    2015-01-13

    A first device is provided. The device includes a print head. The print head further includes a first nozzle hermetically sealed to a first source of gas. The first nozzle has an aperture having a smallest dimension of 0.5 to 500 microns in a direction perpendicular to a flow direction of the first nozzle. At a distance from the aperture into the first nozzle that is 5 times the smallest dimension of the aperture of the first nozzle, the smallest dimension perpendicular to the flow direction is at least twice the smallest dimension of the aperture of the first nozzle.

  5. 2012 NERSC User Survey Text

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2012 User Survey Text 2010/2011 User Survey Results 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries

  6. E-print Network Alerts -- Energy, science, and technology for...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  7. Dai Nippon Printing Co Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search Name: Dai Nippon Printing Co Ltd Place: Shinjuku-ku, Tokyo, Japan Zip: 162-8001 Sector: Solar Product: Print conglomerate which is involved with...

  8. Novel 3-D Printed Inverters for Electric Vehicles Can Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April...

  9. Gas cushion control of OVJP print head position

    DOEpatents

    Forrest, Stephen R

    2014-10-07

    An OVJP apparatus and method for applying organic vapor or other flowable material to a substrate using a printing head mechanism in which the print head spacing from the substrate is controllable using a cushion of air or other gas applied between the print head and substrate. The print head is mounted for translational movement towards and away from the substrate and is biased toward the substrate by springs or other means. A gas cushion feed assembly supplies a gas under pressure between the print head and substrate which opposes the biasing of the print head toward the substrate so as to form a space between the print head and substrate. By controlling the pressure of gas supplied, the print head separation from the substrate can be precisely controlled.

  10. The World's Largest 3D Printed Object | Department of Energy

    Energy Saver

    It took 30 hours to print using carbon fiber and composite plastic materials. Using 3D-printing makes the final product cheaper and quicker to manufacture, and it works just as ...

  11. Wind Turbine Manufacturing Transforms with Three-Dimensional Printing |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Turbine Manufacturing Transforms with Three-Dimensional Printing Wind Turbine Manufacturing Transforms with Three-Dimensional Printing May 19, 2016 - 12:57pm Addthis From medical devices to airplane components, three-dimensional (3-D) printing (also called additive manufacturing) is transforming the manufacturing industry. Now, research that supports the Energy Department's Atmosphere to Electrons (A2e) initiative is applying 3-D-printing processes to create wind turbine

  12. Minutes from the March 14, 2013 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    March 14, 2013 Mail discussion Al Majors is on leave today. Ellsworth Howell Jr. and Tony Nellums are sitting for Al. There are no agenda items for the Mail portion. A discussion period for questions, comments, or suggestions was opened without response Printing discussion Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. Agencies are encouraged to limit the publication and

  13. Minutes from the September 15, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-four individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming FY 2010 Department-wide Three-Year Plan Dallas Woodruff, Headquarters informed the

  14. Marketing Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Expand Utility Resources News & Events Expand News & Events Skip navigation links Marketing Resources Marketing Portal Reports, Publications, and Research Utility Toolkit...

  15. The World's Largest 3D Printed Object | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The World's Largest 3D Printed Object The World's Largest 3D Printed Object Addthis The Guinness Book of World Records just certified that the Department of Energy's Oak Ridge National Laboratory produced the world's largest solid 3D-printed object

  16. Search over 660,000 E-prints at OSTI's E-print Network | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information over 660,000 E-prints at OSTI's E-print Network Back to the OSTI News Listing for 2005 With our latest update, users can now search against a universe of 664,745 e-prints. These e-prints are created within the research laboratories of 18,200 active investigators whose aim is to make sure that their work is readily accessible to interested colleagues and students

  17. Hydrothermal Resources

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydrothermal Resources A geothermal resource requires fluid, heat, and permeability to generate electricity. Conventional hydrothermal resources contain all three components naturally. These geothermal systems can occur in widely diverse geologic settings, sometimes without clear surface manifestations of the underlying resource. In 2008, the U.S. Geological Survey (USGS) estimated that 30 GWe of undiscovered geothermal resources exist in the western United States 1- ten times the current

  18. A Docking Casette For Printed Circuit Boards

    DOEpatents

    Barringer, Dennis R. (Wallkill, NY); Seminaro, Edward J. (Milton, NY); Toffler, Harold M. (Newburgh, NY)

    2003-08-19

    A docking apparatus for printed circuit boards including a cassette housing, having a housing base, a housing cover and a housing wall, wherein the housing base and the housing wall are disposed relative to each other so as to define a housing cavity for containing a printed circuit board and wherein the housing wall includes a cable opening disposed so as to be communicated with the housing cavity, a linkage mechanism, wherein the linkage mechanism includes an engagement configuration and a disengagement configuration and wherein the linkage mechanism is disposed so as to be associated with the cassette housing and a housing bezel, wherein the housing bezel is disposed relative to the cassette housing so as to be associated with the cable opening.

  19. Solar paint: From synthesis to printing

    DOE PAGES [OSTI]

    Zhou, Xiaojing; Belcher, Warwick; Dastoor, Paul

    2014-11-13

    Water-based polymer nanoparticle dispersions (solar paint) offer the prospect of addressing two of the main challenges associated with printing large area organic photovoltaic devices; namely, how to control the nanoscale architecture of the active layer and eliminate the need for hazardous organic solvents during device fabrication. We review progress in the field of nanoparticulate organic photovoltaic (NPOPV) devices and future prospects for large-scale manufacturing of solar cells based on this technology.

  20. Rework of parylene coated printed wiring assemblies

    SciTech Connect

    Williams, J.O.

    1991-04-01

    This document describes the recommended method for reworking parylene coated Printed Wiring Assemblies (PWAs). Special training is required to successfully rework PWAs that are parylene coated. Parylene coating rework should not be attempted on production units unless successful parylene coating removal has been completed on non-production assemblies. The rework procedures described in this document are recommended for normal parylene rework. Special situations may dictate slight deviation from the methods described herein. 4 figs.

  1. Contacts & Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contacts & Resources Contacts & Resources Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 envoutreach@lanl.gov Public...

  2. Resources - JCAP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    0 Resources Hero.jpg Resources Research Introduction Thrusts Library Resources Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database JCAP offers a number of databases and simulation tools for solar-fuel generator researchers and developers. User Facilities Expert Team solarfuels1.jpg

  3. Computing Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Cluster-Image TRACC RESEARCH Computational Fluid Dynamics Computational Structural Mechanics Transportation Systems Modeling Computing Resources The TRACC Computational Clusters ...

  4. 3D Printed Car at the International Manufacturing Technology Show |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 3D Printed Car at the International Manufacturing Technology Show 3D Printed Car at the International Manufacturing Technology Show Addthis WORLD&#039;S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak Ridge National Laboratory's Manufacturing Demonstration Facility-with funding support from the Energy

  5. Minutes from the October 26, 2011 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    October 26, 2011 Printing and Mail Managers Exchange Forum Teleconference Comments/Additions to last Months Minutes No comments. Please note the teleconference minutes were not electronically recorded as in the past. The minutes only consist of information provided to the group by Alvan Majors and Dallas Woodruff of Headquarters on topics listed in the agenda and not any follow-up questions. Printing Agenda Items......... Printing and Publishing Activities Report "Three-Year Plan: Dallas

  6. E-print Network home page -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Energy, science, and technology for the research community Enter Search Terms Search Advanced Search The E-print Network is . . . . . . a vast, integrated network of electronic ...

  7. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 1

    SciTech Connect

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  8. DOE fundamentals handbook: Engineering symbology, prints, and drawings

    SciTech Connect

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  9. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 2

    SciTech Connect

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  10. 3D Printing a Classic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3D Printing a Classic 3D Printing a Classic January 15, 2015 - 4:02pm Addthis The team from the Oak Ridge Manufacturing Demonstration Facility is at the Detroit Auto Show this week to display their latest accomplishment: a 3D-printed, electric-motor driven, Shelby Cobra. In just six weeks, the team went from designing the car in digital models, to 3D printing the frame and other parts with fiber-reinforced composite material, to assembling, finishing, and painting the final product. President

  11. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    29 Oct 2015 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Tech Specs for Boundary and first...

  12. Energy Department Unveils 3D-Printed Building; New Initiatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day DOE Announces JUMP Initiative Winners, Launches New Crowdsourcing Calls at Bay Area Maker Faire

  13. Making 3D Printed Christmas Ornaments | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Check out the video featuring Juan Pablo Cilia, a Rapid Prototyping Specialist in the ... Santa's sleigh becomes "Intelligent Machine" this Christmas Using 3D Printing to Redesign ...

  14. Silver Ink for Conductor Printing - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    flake suspended in a suitable solvent amenable to printing. These silver metal suspension formulations require high processing temperatures to sinter the particles (180 C)....

  15. Structural color printing based on plasmonic metasurfaces of...

    Office of Scientific and Technical Information (OSTI)

    Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform ...

  16. Online Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    online resources Online Resources Fusion and Plasma Physics Fusion Energy Education FuseEdWeb: Fusion Energy Education A Webby-award-winning site sponsored by LLNL and the Princeton Plasma Physics Laboratory with information and links to the world of fusion and plasma physics. General Atomics Fusion Education General Atomics Fusion Education Fusion education resources for teachers and students from General Atomics. Lasers and Photon Science Optics for Kids Optics 4 Kids Learn about optics-the

  17. Subcontractor Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Community, Environment » Environmental Stewardship » Subcontactor Resources Subcontractor Resources We make it easy for you to work for Environmental Programs. Contact Environmental Programs Directorate Office (505) 606-2337 Points of Contact Subcontracts Manager Robin Reynolds Badging LANL TRU Program (LTP) - Mary Thronas Corrective Actions Program (CAP) - Tammie Fredenburg Records Debi Guffee Training Lisarae Lattin Resources Badge request form (docx) Injury illness card (pdf) Laboratory

  18. Business resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Business » Small Business » Business resources Business resources Setting new standards and small business initiatives within NNSA that will contribute to developing and strengthening our strategic partners for national security challenges. Contact Small Business Office (505) 667-4419 Email Broaden your market-find more resources with other labs, organizations LANL encourages business owners to fully research the Laboratory and to also market their services and products to other businesses,

  19. W7 printing from VISITOR network

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    W4, Federal Withholding Tax Form W4, Federal Withholding Tax Form W4, Federal Withholding Tax Form (104.8 KB) More Documents & Publications Employee In-Processing Forms DOE F 1500.7 PSH-16-0069 - In the Matter of Personnel Security Hearing

    W7 printing from VISITOR network Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "start menu", click on "Devices and Printers" 2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose

  20. Additional Resources

    Energy.gov [DOE]

    The following resources are focused on Federal new construction and major renovation projects, sustainable construction, and the role of renewable energy technologies in such facilities. These...

  1. Subcontractor Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Robin Reynolds Badging LANL TRU Program (LTP) - Mary Thronas Corrective Actions Program (CAP) - Tammie Fredenburg Records Debi Guffee Training Lisarae Lattin Resources Badge...

  2. Nuter is new Argonne chief human resources officer | Argonne National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory Nuter is new Argonne chief human resources officer September 6, 2016 Tweet EmailPrint Julie Nuter has been appointed chief human resources officer at the U.S. Department of Energy's Argonne National Laboratory, effective August 29, 2016. As part of Argonne's senior management team, Nuter will work in partnership with the laboratory's scientific and operations divisions to develop and implement programs that attract, develop, compensate and help retain a qualified and diverse

  3. Notice of Intent to Develop DOE Guide 436.1-1, Sustainable Print Management

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2015-03-19

    The Guide will support Executive Order (E.O.) 13693, Planning for Federal Sustainability in the Next Decade. signed on March 19, 2015, which requires the Federal Government to lead by example to create a clean energy economy that will increase prosperity, promote energy security, protect the interests of taxpayers, and safeguard the health of the environment. Under E.O. 13693, Federal agencies are required to increase energy efficiency, eliminate waste, and leverage agency acquisitions by reducing costs and resources in their printing activities. This Guide also aligns with the requirements of DOE O 436.1, Departmental Sustainability.

  4. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells...

  5. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a...

  6. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jobs @ JLab print version Departments Appraisal System Benefits Compensation Diversity at JLab Diversity Council Emeritus Program Employee Concerns Program (ECP) Employee...

  7. Fact #804: November 18, 2013 Tool Available to Print Used Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Available to Print Used Vehicle Fuel Economy Window Stickers Fact 804: November 18, 2013 Tool Available to Print Used Vehicle Fuel Economy Window Stickers Because used vehicle ...

  8. Widget:AnchorText | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    you can specify a target, title, and style to the link. Parameters include: page - pagearticle title for href link text - anchor text title - title to display for anchor...

  9. Community Renewables Projects (Text Version) | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    some solutions to the challenges that individuals have in ... some resources for communitysolar projects and also for ... So given all of those barriers we're seeing more and more ...

  10. Wind Webinar Text Version | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Text Version Wind Webinar Text Version Download the text version of the audio from the DOE Office of Indian Energy webinar on wind renewable energy. Text Version of the DOE Office of Indian Energy Foundational Course on Wind (172.73 KB) More Documents & Publications SERC Photovoltaics for Residential Buildings Webinar Transcript strategiesforsuccessfulenergymanagement.doc Biomass Webinar

  11. Connected Buildings Interoperability Vision Webinar (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text version of the webinar Connected Buildings Interoperability Vision, presented in May 2015.

  12. Archaeological Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Archaeological Resources Archaeological Resources Our environmental stewardship commitment: we will cleanup the past, minimize impacts for current environmental operations, and create a sustainable future. April 12, 2012 Nake'muu Standing and previously collapsed walls at Nake'muu - note the window opening in the wall in the forefront of the photograph. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email The results of the

  13. SunShot Incubator Virtual Company Showcase Webinar - Text Version...

    Energy.gov [DOE] (indexed site)

    ... Our goal in the SunShot project is to replace the silver of grid lines and electrodes that are on the top of the solar cell with printed nickel silicide and copper grids. The ...

  14. Alt Text Requirements for Web Images

    Energy.gov [DOE]

    Per Section 508 requirements, images on Office of Energy Efficiency and Renewable Energy (EERE) websites and applications must have alt text. Alt text describes what an image looks like in words, making it accessible to screen readers.

  15. Searching for Text (pbl/help)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    for Text Other Navigation Aids PDF File Info Firstgov Searching for Text The Power Services web site features a Search tool (powered by Google) in the upper right corner of...

  16. Strategic Energy Planning Webinar Text Version

    Energy.gov [DOE]

    Download the text version of the audio from the DOE Office of Indian Energy webinar on strategic energy planning.

  17. Training Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Learning and Workforce Development » Training Resources Training Resources Training Resources Type Training Resources

  18. Instructions to Print Monthly P-card Statement

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to Print Monthly P-card Statement 1. Go to Website https:gov1.paymentnet.com and login with your Organization ID, User ID and Pass Phrase. Organization ID is doe0001. User ID and...

  19. A Unix Print Filter for Controlling an HP Laserjet Printer

    SciTech Connect

    Hoffman, F.M.

    1992-01-01

    This report describes a Unix print filter designed to control an Hewlett Packard Laserjet or other printer that uses Hewlett Packard's Printer Control Language (HP-PCL). The filter gives users the ability to control print pitch, orientation, and indentation by using standard flags to the Unix lpr command or multiple entries in the /etc/printcap file and allows both ascii and binary (i.e., graphics and down-loadable fonts) files to be printed. Additionally, the filter provides some accounting capability. The supported print pitch and orientation options are described, as are the different configuration options. The code for the filter is included in Appendix A and sample entries for the /etc/printcap file are included in Appendix B and C.

  20. Printing 3D Catalytic Devices | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Printing 3D Catalytic Devices An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. Ames Laboratory scientist Igor...

  1. Printed decorative solar panels could become part of our homes...

    OpenEI (Open Energy Information) [EERE & EIA]

    content Printed decorative solar panels could become part of our homes and offices Hello, I provide user supp... The top one on this page: htt... Can you send the specific...

  2. 3D Printing Enables New Generation of Heat Exchangers

    Energy.gov [DOE]

    Three-dimensional printing is revolutionizing how we manufacture objects in almost every industry—from vehicles to medical devices to biotech. Now, the University of Maryland, through a partnership...

  3. Printing a Car: A Team Effort in Innovation

    Office of Energy Efficiency and Renewable Energy (EERE)

    Oak Ridge National Lab's work with Local Motors to build a 3D-printed car was highlighted at the International Manufacturing Technology Show (IMTS) in September 2014 with a live demonstration.

  4. Future of 3D Printing | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    In 2016, GE will enter a new jet engine into service called the CFM LEAP-the first in GE's line to incorporate 3D-printed parts. Specifically, it will be a combustion component ...

  5. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    K L M N O P Q R S T U V W X Y Z Optimization Online, An E-Print Site for the Optimization Community Oregon State University, Department of Mathematics, Vector Calculus Gap Project

  6. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing A screenshot of the cover of the 3D blade manufacturing brochure. Innovation in the design and manufacturing of wind power generation components continues to be critical to achieving our national goals. As a result of this challenge, the U.S. Department of Energy's Wind Program and Advanced Manufacturing Office are partnering with public

  7. Researchers 3D print ultralight supercapacitors | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) 3D print ultralight supercapacitors Monday, February 22, 2016 - 12:00am NNSA Blog The micro-architectured, ultra-lightweight supercapacitor material is able to retain energy on par with those made with electrodes 10 to 100 times thinner. For the first time ever, scientists at Lawrence Livermore National Laboratory and UC Santa Cruz have successfully 3D-printed supercapacitors using an ultra-lightweight graphene aerogel, opening the door to novel, unconstrained designs

  8. DOE and Critical Materials Video (Text Version)

    Energy.gov [DOE]

    This is a text version of the "DOE and Critical Materials" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  9. Fuel Cell Animation- Chemical Process (Text Version)

    Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  10. Manufacturing Ecosystems and Keystone Technologies (Text Version)

    Energy.gov [DOE]

    This is a text version of the Manufacturing Ecosystems and Keystone Technologies video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  11. Welcome and Advanced Manufacturing Partnership (Text Version)

    Energy.gov [DOE]

    This is a text version of the Welcome and Advanced Manufacturing Partnership video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  12. Teacher Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Teach and Learn Teach and Learn WELCOME! Whether you're a K-12 teacher, a university administrator, or a student interested in starting your path toward a clean energy career, we’ve got you covered. On this page, you'll find links to student competitions, internships, training and degree programs, career planning tools, and professional development opportunities. You can also explore videos, data tools, lessons, activities, and other online resources for educators at all levels. | Photo

  13. Texts to Hillary-- from Secretary Chu

    Energy.gov [DOE]

    We showed the "Texts from Hillary" Tumblr to Secretary Chu and he thought is was as hilarious as everyone else on the Internet, so we got to work on a contribution on his behalf.

  14. MDF Form and Function (Text Version)

    Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  15. Vehicle Technologies Office: Lightweighting Video Text Version

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a text version of the Motorweek video segment Materials Technology / Vehicle Lightweighting, which aired on April 21, 2014. The full video is on the Lightweight Materials for Cars and...

  16. Aluminum plasmonic metamaterials for structural color printing...

    Office of Scientific and Technical Information (OSTI)

    Sponsoring Org: USDOE Country of Publication: United States Language: English Word Cloud More Like This Free Publicly Accessible Full Text Publisher's Version of Record at 10.1364...

  17. Computing Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources This page is the repository for sundry items of information relevant to general computing on BooNE. If you have a question or problem that isn't answered here, or a suggestion for improving this page or the information on it, please mail boone-computing@fnal.gov and we'll do our best to address any issues. Note about this page Some links on this page point to www.everything2.com, and are meant to give an idea about a concept or thing without necessarily wading through a whole website

  18. Sandia National Laboratories: News: Media Resources: Media Contacts

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Media Contacts & Resources General Inquiries Members of the News Media: (505) 844-4902 Members of the Public: (505) 844-8066 California | New Mexico Other Contacts for the News Media Media Relations team Media Relations assists print, broadcast and online news media to obtain the latest information about Sandia. The team regularly issues news releases, many of which include high-resolution images and video clips, and interactive social media applications when possible that media may download

  19. Optical systems fabricated by printing-based assembly

    DOEpatents

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J.; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-II; Yu; Chang-Jae; Ko, Heung-Cho; Stoykovich; Mark; Yoon, Jongseung

    2011-07-05

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  20. Optical systems fabricated by printing-based assembly

    DOEpatents

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred; Motala, Michael; Ahn, Jong -Hyun; Park, Sang -Il; Yu, Chang -Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2015-08-25

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  1. Optical systems fabricated by printing-based assembly

    DOEpatents

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-Il; Yu, Chang-Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2014-05-13

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  2. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Resources Resources The following tools and resources have been useful to Department of ... Incentives Toolkit Partnerships Toolkit Tools Solution Center Cost-Effectiveness Tool ...

  3. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Resources Resources The Office of Indian Energy provides the following resources to assist Tribes with energy development, capacity building, energy infrastructure, energy costs,...

  4. ORISE Resources: Consumer Health Resource Information Service...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Consumer Health Resource Information Service (CHRIS) guide The Consumer Health Resource Information Service (CHRIS) guide for faith-based organizations and communities was...

  5. Computation of term dominance in text documents

    SciTech Connect

    Bauer, Travis L.; Benz, Zachary O.; Verzi, Stephen J.

    2012-04-24

    An improved entropy-based term dominance metric useful for characterizing a corpus of text documents, and is useful for comparing the term dominance metrics of a first corpus of documents to a second corpus having a different number of documents.

  6. Text Delegation Procedures - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Requirements Text Delegation Procedures Delegation Procedures Re-Delegation Procedures by Website Administrator Procedures for Line Managers' Delegations of Authority when proposing new delegations, redelegating existing delegation, proposing an amendment, rescinding a delegation, and when a delegation is not needed. Delegation Procedures Redelegation Procedures Procedures for Delegations of Authority Please use the following procedures when Proposing New Delegations; Redelegating Existing

  7. High density printed electrical circuit board card connection system

    DOEpatents

    Baumbaugh, Alan E.

    1997-01-01

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections.

  8. 3D Printing Comes of Age | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D Printing Comes of Age 3D Printing Comes of Age September 19, 2014 - 5:25pm Addthis The highlight of this year's International Manufacturing Technology Show (IMTS), held earlier in September at the McCormick Place Convention Center in Chicago, IL, was the electric car produced live during the Show. More than 110,000 people witnessed the representatives from Cincinnati Incorporated-a 115-year-old industrial machine manufacturer from Ohio, Local Motors-a new creative manufacturing Arizona

  9. High density printed electrical circuit board card connection system

    DOEpatents

    Baumbaugh, A.E.

    1997-05-06

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections. 12 figs.

  10. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect

    Ababei, Cristinel; Yuvarajan, Subbaraya; Schulz, Douglas L.

    2010-07-15

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  11. Install the E-print Network toolbar -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  12. EATON PURSUES PRINT-BASED MANUFACTURING OF INTEGRATED, LOW-COST...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INTEGRATED, LOW-COST, HIGH-PERFORMANCE SSL LUMINAIRES EATON PURSUES PRINT-BASED MANUFACTURING OF INTEGRATED, LOW-COST, HIGH-PERFORMANCE SSL LUMINAIRES Print-based Manufacturing of ...

  13. Local Motors Begins Their Six Day Quest to 3D Print the 'Strati...

    Energy.gov [DOE] (indexed site)

    to 3D print a car at the September 2014 International Manufacturing Technology Show. Local Motors Begins Their Six Day Quest to 3D Print the 'Strati' Car Live at IMTS (470.83 ...

  14. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Weve had a number of inquiries about how to best search our E-prints on Web-sites feature for individual authors. Heres what you do. First be sure that the E-prints on Web ...

  15. ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 ...

  16. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles...

    Energy Saver

    April 28, 2015 - 2:02pm Addthis 3-D Printed Inverter 3-D Printed Inverter Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more ...

  17. Intense X-rays expose tiny flaws in 3-D printed titanium that...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    For 3-D printing, metals are usually atomized into powders first. Ti-6Al-4V powders are printed by using either selective laser melting or electron-beam melting (EBM), which is the ...

  18. OSTI's E-print Network content tops 900,000 documents | OSTI...

    Office of Scientific and Technical Information (OSTI)

    than 22,000 scientific e-print Web sites. In addition, the E-print Network provides links to more than 2,900 relevant scientific societies. This Web portal, established as the ...

  19. Extraction of information from unstructured text

    SciTech Connect

    Irwin, N.H.; DeLand, S.M.; Crowder, S.V.

    1995-11-01

    Extracting information from unstructured text has become an emphasis in recent years due to the large amount of text now electronically available. This status report describes the findings and work done by the end of the first year of a two-year LDRD. Requirements of the approach included that it model the information in a domain independent way. This means that it would differ from current systems by not relying on previously built domain knowledge and that it would do more than keyword identification. Three areas that are discussed and expected to contribute to a solution include (1) identifying key entities through document level profiling and preprocessing, (2) identifying relationships between entities through sentence level syntax, and (3) combining the first two with semantic knowledge about the terms.

  20. Picture of the Week: An explosion of 3D printing technology

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    An explosion of 3D printing technology Scientists in Los Alamos National Laboratory's Chemistry and Explosive Science and Shock Physics divisions are exploring new methods for 3D printing that allow for the function of materials to be controlled by their internal structure. May 24, 2015 An explosion of 3D printing technology x View image on Flickr » Additive Manufacturing, known also as 3D printing, allows for the rapid production of parts with complex shapes that would be impossible to

  1. EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Just Plain Cool, the 3D Printed Shelby Cobra EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra February 4, 2015 - 4:32pm Addthis Indistinguishable from conventional production vehicles on display, the 3D printed Shelby Cobra celebrated its 50th anniversary at the Detroit Auto Show in early January. Printed at the Department of Energy's Manufacturing Demonstration Facility at Oak Ridge National Laboratory, the Shelby Cobra electric vehicle replica is

  2. Solar resources

    SciTech Connect

    Hulstrom, R.L.

    1989-01-01

    Following the 1973 oil embargo, the US government initiated a program to develop and use solar energy. This led to individual programs devoted to developing various solar radiation energy conversion technologies: photovoltaic and solar-thermal conversion devices. Nearly concurrently, it was recognized that understanding the available insolation resources was required to develop and deploy solar energy devices and systems. It was also recognized that the insolation information available at that time (1973) was not adequate to meet the specific needs of the solar energy community. Federal efforts were initiated and conducted to produce new and more extensive information and data. The primary federal agencies that undertook such efforts were the Department of Energy (DOE) and the National Oceanic and Atmospheric Administration (NOAA). NOAA's efforts included activities performed by the National Weather Service (NWS) and the National Climatic Data Center (NCDC). This book has two man objectives: to report some of the insolation energy data, information, and products produced by the federal efforts and to describe how they were produced. Products include data bases, models and algorithms, monitoring networks, instrumentation, and scientific techniques. The scope of products and results does not include all those produced by past federal efforts. The book's scope and subject matter are oriented to support the intent and purpose of the other volumes in this series. In some cases, other pertinent material is presented to provide a more complete coverage of a given subject. 385 refs., 149 figs., 50 tabs.

  3. Daylighting simulation: methods, algorithms, and resources

    SciTech Connect

    Carroll, William L.

    1999-12-01

    This document presents work conducted as part of Subtask C, ''Daylighting Design Tools'', Subgroup C2, ''New Daylight Algorithms'', of the IEA SHC Task 21 and the ECBCS Program Annex 29 ''Daylight in Buildings''. The search for and collection of daylighting analysis methods and algorithms led to two important observations. First, there is a wide range of needs for different types of methods to produce a complete analysis tool. These include: Geometry; Light modeling; Characterization of the natural illumination resource; Materials and components properties, representations; and Usability issues (interfaces, interoperability, representation of analysis results, etc). Second, very advantageously, there have been rapid advances in many basic methods in these areas, due to other forces. They are in part driven by: The commercial computer graphics community (commerce, entertainment); The lighting industry; Architectural rendering and visualization for projects; and Academia: Course materials, research. This has led to a very rich set of information resources that have direct applicability to the small daylighting analysis community. Furthermore, much of this information is in fact available online. Because much of the information about methods and algorithms is now online, an innovative reporting strategy was used: the core formats are electronic, and used to produce a printed form only secondarily. The electronic forms include both online WWW pages and a downloadable .PDF file with the same appearance and content. Both electronic forms include live primary and indirect links to actual information sources on the WWW. In most cases, little additional commentary is provided regarding the information links or citations that are provided. This in turn allows the report to be very concise. The links are expected speak for themselves. The report consists of only about 10+ pages, with about 100+ primary links, but with potentially thousands of indirect links. For purposes of

  4. Printing a Car: A Team Effort in Innovation

    ScienceCinema

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig

    2016-07-12

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  5. Gas microstrip detectors based on flexible printed circuit technology

    SciTech Connect

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Maier, J.M.C.

    1996-06-01

    The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  6. Printing a Car: A Team Effort in Innovation

    SciTech Connect

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig

    2014-09-17

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  7. Monolithically integrated Helmholtz coils by 3-dimensional printing

    SciTech Connect

    Li, Longguang [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Abedini-Nassab, Roozbeh; Yellen, Benjamin B., E-mail: yellen@duke.edu [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Department of Mechanical Engineering and Materials Science, Duke University, P.O. Box 90300, Hudson Hall, Durham, North Carolina 27708 (United States)

    2014-06-23

    3D printing technology is of great interest for the monolithic fabrication of integrated systems; however, it is a challenge to introduce metallic components into 3D printed molds to enable broader device functionality. Here, we develop a technique for constructing a multi-axial Helmholtz coil by injecting a eutectic liquid metal Gallium Indium alloy (EGaIn) into helically shaped orthogonal cavities constructed in a 3D printed block. The tri-axial solenoids each carry up to 3.6?A of electrical current and produce magnetic field up to 70?G. Within the central section of the coil, the field variation is less than 1% and is in agreement with theory. The flow rates and critical pressures required to fill the 3D cavities with liquid metal also agree with theoretical predictions and provide scaling trends for filling the 3D printed parts. These monolithically integrated solenoids may find future applications in electronic cell culture platforms, atomic traps, and miniaturized chemical analysis systems based on nuclear magnetic resonance.

  8. Finding Text Information in the Ocean of Electronic Documents

    SciTech Connect

    Medvick, Patricia A.; Calapristi, Augustin J.

    2003-02-05

    Information management in natural resources has become an overwhelming task. A massive amount of electronic documents and data is now available for creating informed decisions. The problem is finding the relevant information to support the decision-making process. Determining gaps in knowledge in order to propose new studies or to determine which proposals to fund for maximum potential is a time-consuming and difficult task. Additionally, available data stores are increasing in complexity; they now may include not only text and numerical data, but also images, sounds, and video recordings. Information visualization specialists at Pacific Northwest National Laboratory (PNNL) have software tools for exploring electronic data stores and for discovering and exploiting relationships within data sets. These provide capabilities for unstructured text explorations, the use of data signatures (a compact format for the essence of a set of scientific data) for visualization (Wong et al 2000), visualizations for multiple query results (Havre et al. 2001), and others (http://www.pnl.gov/infoviz ). We will focus on IN-SPIRE, a MS Windows vision of PNNL’s SPIRE (Spatial Paradigm for Information Retrieval and Exploration). IN-SPIRE was developed to assist information analysts find and discover information in huge masses of text documents.

  9. OSTIblog Articles in the customizing e-prints information Topic...

    Office of Scientific and Technical Information (OSTI)

    a federated search provides one-stop simultaneous searching of multiple networked data resources, including the newly-added resources -- DOE Data Explorer and DOE Green Energy. ...

  10. Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer

    Energy Saver

    Lighting | Department of Energy Information Resources » Videos » Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Text-Alternative Version: CALiPER Series 21 on LED Linear Lamps and Troffer Lighting Following is a text version of a video about CALiPER Application Report Series 21 on LED Linear Lamps and Troffer Lighting. Tracy Beeson, Lighting Engineer, Pacific Northwest National Laboratory: Fluorescent troffers are widely used in office spaces, meeting

  11. OSTI's E-print Network content tops 900,000 documents | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information E-print Network content tops 900,000 documents Back to the OSTI News Listing for 2006 OSTI's E-print Network: Research Communications for Scientists and Engineers now provides access to over 900,000 documents on more than 22,000 scientific e-print Web sites. In addition, the E-print Network provides links to more than 2,900 relevant scientific societies. This Web portal, established as the PrePRINT Network in 2000, is a vast, integrated

  12. 3D Printed Tool for Building Aircraft Achieves Guinness World Records Title

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 3D Printed Tool for Building Aircraft Achieves Guinness World Records Title 3D Printed Tool for Building Aircraft Achieves Guinness World Records Title August 30, 2016 - 2:07pm Addthis Official measurement of the 3D printed trim tool co-developed by Oak Ridge National Laboratory and The Boeing Company exceeded the required minimum size to achieve the Guinness World Records title of largest solid 3D printed item. Official measurement of the 3D printed trim tool

  13. 3D Printed and Semiconductor Technology 'Mash-up' | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3D Printed and Semiconductor Technology 'Mash-up' 3D Printed and Semiconductor Technology 'Mash-up' May 7, 2015 - 4:11pm Addthis 3D Printed and Semiconductor Technology 'Mash-up' What will you get if you put a 3D-printed inverter package with wide bandgap materials, together with the 3D-printed EV version of the Shelby Cobra "plug and play" laboratory-on-wheels? You'll get innovation - innovation that will define even lighter, more powerful, and more efficient vehicles. Oak Ridge

  14. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Improve EV Power and Efficiency | Department of Energy Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April 28, 2015 - 2:02pm Addthis 3-D Printed Inverter 3-D Printed Inverter Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and

  15. Selective evaporation of focusing fluid in two-fluid hydrodynamic print head.

    SciTech Connect

    Keicher, David M.; Cook, Adam W.

    2014-09-01

    The work performed in this project has demonstrated the feasibility to use hydrodynamic focusing of two fluid steams to create a novel micro printing technology for electronics and other high performance applications. Initial efforts focused solely on selective evaporation of the sheath fluid from print stream provided insight in developing a unique print head geometry allowing excess sheath fluid to be separated from the print flow stream for recycling/reuse. Fluid flow models suggest that more than 81 percent of the sheath fluid can be removed without affecting the print stream. Further development and optimization is required to demonstrate this capability in operation. Print results using two-fluid hydrodynamic focusing yielded a 30 micrometers wide by 0.5 micrometers tall line that suggests that the cross-section of the printed feature from the print head was approximately 2 micrometers in diameter. Printing results also demonstrated that complete removal of the sheath fluid is not necessary for all material systems. The two-fluid printing technology could enable printing of insulated conductors and clad optical interconnects. Further development of this concept should be pursued.

  16. The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design

    SciTech Connect

    Speer, Pete

    2009-04-15

    decrease the number of design iterations needed for future implementation of products requiring integration of small printed antennas. In the past, several design iterations have been needed to fine tune antenna dimensions and achieve acceptable levels of performance. This process consumes a large amount of time and material resources leading to costly development of transceiver designs. Typically, this occurs because matching components and antenna geometries are almost never correct on the first design. This work hopes to determine the limitations associated with antenna miniaturization and provide well known antenna examples that can be easily used in future work.

  17. Sandia Energy - Resource Assessment

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resource Assessment Home Stationary Power Energy Conversion Efficiency Water Power Resource Assessment Resource AssessmentAshley Otero2016-01-05T19:06:04+00:00 Characterizing wave...

  18. Direct printing and reduction of graphite oxide for flexible supercapacitors

    SciTech Connect

    Jung, Hanyung; Ve Cheah, Chang; Jeong, Namjo; Lee, Junghoon

    2014-08-04

    We report direct printing and photo-thermal reduction of graphite oxide (GO) to obtain a highly porous pattern of interdigitated electrodes, leading to a supercapacitor on a flexible substrate. Key parameters optimized include the amount of GO delivered, the suitable photo-thermal energy level for effective flash reduction, and the substrate properties for appropriate adhesion after reduction. Tests with supercapacitors based on the printed-reduced GO showed performance comparable with commercial supercapacitors: the energy densities were 1.06 and 0.87 mWh/cm{sup 3} in ionic and organic electrolytes, respectively. The versatility in the architecture and choice of substrate makes this material promising for smart power applications.

  19. Coaxial connector for use with printed circuit board edge connector

    DOEpatents

    Howard, Donald R.; MacGill, Robert A.

    1989-01-01

    A coaxial cable connector for interfacing with an edge connector for a printed circuit board whereby a coaxial cable can be interconnected with a printed circuit board through the edge connector. The coaxial connector includes a body having two leg portions extending from one side for receiving the edge connector therebetween, and a tubular portion extending from an opposing side for receiving a coaxial cable. A cavity within the body receives a lug of the edge connector and the center conductor of the coaxial cable. Adjacent lugs of the edge connector can be bend around the edge connector housing to function as spring-loaded contacts for receiving the coaxial connector. The lugs also function to facilitate shielding of the center conductor where fastened to the edge connector lug.

  20. Federal Sustainable Print Management - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Requirements G 436.1-1, Federal Sustainable Print Management by Jake Wooley The Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by DOE Order 436.1, Departmental Sustainability, dated 5-2-11, and related to the sustainability requirements contained in Executive Order 13693, "Planning for Federal Sustainability in the Next Decade." Does not cancel/supersede other directives. g4361-1.pdf -- PDF Document, 450 KB Writer:

  1. Gas microstrip detectors based on flexible printed circuit

    SciTech Connect

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Curran Maier, J.M.

    1995-09-01

    Microstrip Gas Detectors (MSGC`s) were introduced some years ago as position sensitive detectors capable of operating at very high rates. The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  2. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (ORNL) Big Area Additive Manufacturing (BAAM) system. BAAM is 500 to 1,000 times faster and capable of printing polymer components over 10 times larger than today's industrial additive machines. With research blades measuring 13 meters (42 feet) in length, BAAM provides the necessary scale and foundation for this ground-breaking advancement in blade research and manufacturing. The U.S. Department of Energy's (DOE's) Office of Energy Efficiency and Renewable Energy (EERE) plays a strategic role

  3. Minutes from the February 23, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Minutes Printing and Mail Managers Exchange Forum Teleconference February 23, 2012 Participants: Headquarters (5) National Energy Technology Laboratory, PA National Security Complex Y-12 (2) Oak Ridge National Laboratory Y-12 Site Office (2) Hanford Site Office Oak Ridge Association University Oak Ridge Operations Office BWXT Pantex Site Office JanTec Corporation, Richland, Washington Los Alamos National Laboratory Chicago Office Bettis Atomic Power Laboratory National Security Technology C1,

  4. Minutes from the May 3, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3, 2012 Printing and Mail Managers Exchange Forum Teleconference Al Majors opened the meeting by introducing Derrick Milner, Program Manager from the General Services Administration, Office of Governmentwide Policy. Mr. Milner discussed changes and updates to the Annual Mail Management Report, and new requirements as set by GSA. Changes to the FY- 2012 Mail Management Report and use of the SMART Tool System. The Annual Mail Management Reports are required at GSA by Oct 31 annually; DOE field

  5. Printing and papermaking: Energy consumption and conservation. (Latest citations from the Paper and Board, Printing, and Packaging Industries Research Associations database). Published Search

    SciTech Connect

    Not Available

    1993-06-01

    The bibliography contains citations concerning energy consumption and energy efficient design innovations for papermaking and printing equipment and operations. Economic analysis of energy utilization, computer controlled operations, energy efficient driers for papermaking and printing processes, ventilation systems, and heat recovery technology are included. (Contains a minimum of 181 citations and includes a subject term index and title list.)

  6. Solar Resource Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE solar resource research focuses on understanding historical solar resource patterns and making future predictions, both of which are needed to support reliable power system operation. As solar...

  7. Resources | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Resources Machine Control Center Display Jefferson Lab's accelerator is operated from the Machine Control Center. The MCC features a full-wall display that allows...

  8. MO-A-9A-01: Innovation in Medical Physics Practice: 3D Printing Applications

    SciTech Connect

    Ehler, E; Perks, J; Rasmussen, K; Bakic, P

    2014-06-15

    3D printing, also called additive manufacturing, has great potential to advance the field of medicine. Many medical uses have been exhibited from facial reconstruction to the repair of pulmonary obstructions. The strength of 3D printing is to quickly convert a 3D computer model into a physical object. Medical use of 3D models is already ubiquitous with technologies such as computed tomography and magnetic resonance imaging. Thus tailoring 3D printing technology to medical functions has the potential to impact patient care. This session will discuss applications to the field of Medical Physics. Topics discussed will include introduction to 3D printing methods as well as examples of real-world uses of 3D printing spanning clinical and research practice in diagnostic imaging and radiation therapy. The session will also compare 3D printing to other manufacturing processes and discuss a variety of uses of 3D printing technology outside the field of Medical Physics. Learning Objectives: Understand the technologies available for 3D Printing Understand methods to generate 3D models Identify the benefits and drawbacks to rapid prototyping / 3D Printing Understand the potential issues related to clinical use of 3D Printing.

  9. NREL: Renewable Resource Data Center - Biomass Resource Data

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Data The following biomass resource data collections can be found in the Renewable Resource Data Center (RReDC). Current Biomass Resource Supply An estimate of biomass resources...

  10. Sandia Energy - Solar Resource Assessment

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Solar Resource Assessment Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Solar Resource Assessment Solar Resource AssessmentTara...

  11. Transportation Infrastructure Requirement Resources | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Find infrastructure requirement resources below. DOE Resource Alternative Fuels Data Center: Natural Gas Fueling Infrastructure Development. Other Resource National Governors ...

  12. Fermilab Office of General Counsel - Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Links Documents

  13. Generation of copper rich metallic phases from waste printed circuit boards

    SciTech Connect

    Cayumil, R.; Khanna, R.; Ikram-Ul-Haq, M.; Rajarao, R.; Hill, A.; Sahajwalla, V.

    2014-10-15

    Highlights: • Recycling and material recovery from waste printed circuit boards is very complex. • Thermoset polymers, ceramics and metals are present simultaneously in waste PCBs. • Heat treatment of PCBs was carried out at 1150 °C under inert conditions. • Various metallic phases could be segregated out as copper based metallic droplets. • Carbon and ceramics residues can be further recycled in a range of applications. - Abstract: The rapid consumption and obsolescence of electronics have resulted in e-waste being one of the fastest growing waste streams worldwide. Printed circuit boards (PCBs) are among the most complex e-waste, containing significant quantities of hazardous and toxic materials leading to high levels of pollution if landfilled or processed inappropriately. However, PCBs are also an important resource of metals including copper, tin, lead and precious metals; their recycling is appealing especially as the concentration of these metals in PCBs is considerably higher than in their ores. This article is focused on a novel approach to recover copper rich phases from waste PCBs. Crushed PCBs were heat treated at 1150 °C under argon gas flowing at 1 L/min into a horizontal tube furnace. Samples were placed into an alumina crucible and positioned in the cold zone of the furnace for 5 min to avoid thermal shock, and then pushed into the hot zone, with specimens exposed to high temperatures for 10 and 20 min. After treatment, residues were pulled back to the cold zone and kept there for 5 min to avoid thermal cracking and re-oxidation. This process resulted in the generation of a metallic phase in the form of droplets and a carbonaceous residue. The metallic phase was formed of copper-rich red droplets and tin-rich white droplets along with the presence of several precious metals. The carbonaceous residue was found to consist of slag and ∼30% carbon. The process conditions led to the segregation of hazardous lead and tin clusters in the

  14. Natural resources law handbook

    SciTech Connect

    Not Available

    1991-01-01

    This book covers legal topics ranging from ownership-related issues (including disposition, use and management of privately and publicly-owned lands, resources, minerals and waters) to the protection and maintenance of our nation's natural resources. It contains chapters on oil and gas resources, coal resources, and minerals and mining.

  15. Non-Contact Printed Aluminum Metallization of Si Photovoltaic Devices: Preprint

    SciTech Connect

    Platt, H. A. S.; van Hest, M. F. A. M.; Li, Y.; Novak, J. P.

    2012-06-01

    Alternative solution-based techniques such as aerosol jet printing offer the dual benefits of contactless pattern deposition and high material utilization. We have used aerosol jet printing to investigate non-contact printed Al metal ink as a replacement for screen printed Al back contacts on wafer Si solar cells. This particle-based ink can be prepared at high loadings of 60 weight % metal, which enables rapid deposition of 1 - 10 um thick lines. Al lines printed on Si wafers and heated between 550 and 800 degrees C form low resistance contacts suitable for current extraction. The effectiveness of these printed Al back contacts has further been demonstrated by incorporating them into a series of 21 cm2 crystalline Si solar cells that produced a champion power conversion efficiency of 13%.

  16. Energy Efficiency Resource Standards Resources | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and may be coupled with a state's renewable portfolio standard. Find EERS resources below. ... Energy Solutions: Energy Efficiency Standards and Targets Examining the Peak Demand ...

  17. NREL Helps Universities Go Solar Video - Text Version | State, Local, &

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tribal Governments | NREL NREL Helps Universities Go Solar Video - Text Version Below is the text version for the NREL Helps Universities Go Solar video. Across the nation hundreds of universities are saving money conserving resources and setting an example for the next generation by implementing solar on their campuses. In support of the US Department of Energy's SunShot initiative the National Renewable Energy Laboratory is offering no-cost technical assistance to universities seeking to

  18. Energy Department Unveils 3D-Printed Building; New Initiatives During

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Industry Day | Department of Energy Unveils 3D-Printed Building; New Initiatives During Industry Day Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day October 1, 2015 - 12:25pm Addthis The Energy Department announced several new and exciting innovations and programs during Industry Day held at Oak Ridge National Laboratory (ORNL) in Tennessee Sept. 23-24. This included unveiling a 3-D printed building with integrated energy storage via bidirectional wireless

  19. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  20. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  1. 3D-Printed Foam Outperforms Standard Materials | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3D-Printed Foam Outperforms Standard Materials 3D-Printed Foam Outperforms Standard Materials April 27, 2016 - 5:58pm Addthis News release from Lawrence Livermore Laboratory, April 27, 2016. Lawrence Livermore National Laboratory (LLNL) material scientists have found that 3D-printed foam works better than standard cellular materials in terms of durability and long-term mechanical performance. Foams, also known as cellular solids, are an important class of materials with applications ranging from

  2. SU-E-T-455: Characterization of 3D Printed Materials for Proton Beam Therapy

    SciTech Connect

    Zou, W; Siderits, R; McKenna, M; Khan, A; Yue, N [Rutgers University, New Brunswick, NJ (United States); McDonough, J; Yin, L; Teo, B [University of Pennsylvania, Philadelphia, PA (United States); Fisher, T [Memorial Medical Center, Modesto, CA (United States)

    2014-06-01

    Purpose: The widespread availability of low cost 3D printing technologies provides an alternative fabrication method for customized proton range modifying accessories such as compensators and boluses. However the material properties of the printed object are dependent on the printing technology used. In order to facilitate the application of 3D printing in proton therapy, this study investigated the stopping power of several printed materials using both proton pencil beam measurements and Monte Carlo simulations. Methods: Five 34 cm cubes fabricated using three 3D printing technologies (selective laser sintering, fused-deposition modeling and stereolithography) from five printers were investigated. The cubes were scanned on a CT scanner and the depth dose curves for a mono-energetic pencil beam passing through the material were measured using a large parallel plate ion chamber in a water tank. Each cube was measured from two directions (perpendicular and parallel to printing plane) to evaluate the effects of the anisotropic material layout. The results were compared with GEANT4 Monte Carlo simulation using the manufacturer specified material density and chemical composition data. Results: Compared with water, the differences from the range pull back by the printed blocks varied and corresponded well with the material CT Hounsfield unit. The measurement results were in agreement with Monte Carlo simulation. However, depending on the technology, inhomogeneity existed in the printed cubes evidenced from CT images. The effect of such inhomogeneity on the proton beam is to be investigated. Conclusion: Printed blocks by three different 3D printing technologies were characterized for proton beam with measurements and Monte Carlo simulation. The effects of the printing technologies in proton range and stopping power were studied. The derived results can be applied when specific devices are used in proton radiotherapy.

  3. E-print Network provides access to science, scientists | OSTI, US Dept of

    Office of Scientific and Technical Information (OSTI)

    Energy Office of Scientific and Technical Information E-print Network provides access to science, scientists Back to the OSTI News Listing for 2006 You can search more than 900,000 scientific documents at OSTI's E-print Network. This vast, integrated network of scientific and technical information contains e-prints in basic and applied sciences, primarily in physics but also including subject areas such as chemistry, biology and life sciences, materials science, nuclear sciences and

  4. Women's Employee Resource Group

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Careers, Jobs » Inclusion & Diversity » Women's Employee Resource Group Women's Employee Resource Group The Women's Employee Resource Group encourages women's contributions, professional development opportunities, and shared support across the Laboratory. Contact Us Office of Diversity and Strategic Staffing (505) 667-2602 Email Computational scientist Hai Ah Nam, a member of the Women's Employee Resource Group Computational scientist Hai Ah Nam, a member of the Women's Employee Resource

  5. Hanford cultural resources management plan

    SciTech Connect

    Chatters, J.C.

    1989-06-01

    As a federal agency, the US Department of Energy (DOE) has been directed by Congress and the President to provide leadership in the preservation of prehistoric, historical, and cultural resources on lands it administers, to manage these in a spirit of stewardship for future generations, and to protect and preserve the rights of Native Americans to religious freedom. The purpose of this document is to describe how the DOE-Richland Operations (DOE-RL) will meet those responsibilities on the Hanford Site, pursuant to guidelines for Agency Responsibilities under the Historic Preservation Act (FR 53:31, February 17, 1988). This document is intended for multiple uses. Among other things, the text is designed as a manual for cultural resource managers to follow and as an explanation of the process of cultural resource regulatory compliance for the DOE-RL and Site contractors. 10 refs., 17 figs., 11 tabs.

  6. Browse by Discipline -- E-print Network Subject Pathways: Physics...

    Office of Scientific and Technical Information (OSTI)

    ... Harsh Deep (Harsh Deep Chopra) - Department of Mechanical and Aerospace Engineering, State University of New ... Engineering, Compaq Water Resources Simulations ...

  7. Information Resources - Publications

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    News FAQ Search Online Catalog print version Quick Search Search By: Keyword Author Title Year GO Main Menu Home My Papers Submit Status Signatures Search Admin Log Out Contract Acknowledgment Notice In June 2014, the Department of Energy's Office of Science issued new guidance for manuscripts produced by DOE-funded laboratories. Each submitted manuscript must now contain a Notice to the Publisher and an Acknowledgment. Notice to Publisher As per the JSA contract with DOE, it is necessary to

  8. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    print version Departments Benefits Compensation Employee Relations Employment JLab Registration / International Services Training and Performance Office Job Related Training & Education Reimbursement Procedures Employee Concerns Program (ECP) Contact Us Rhonda Barbosa, HR Director rbarbosa@jlab.org Compensation & Benefits Treva Ferguson, HR Consultant, Compensation & Benefits (757) 269-7291, treva@jlab.org Steven Goodstein, HR Consultant, Compensation & Benefits (757) 269-7128,

  9. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jobs @ JLab print version Departments Research Assistantship Sponsor Form Jefferson Science Associates Minority/Female Undergraduate Research Assistantship Jefferson Lab is seeking candidates for a research assistantship to provide an opportunity for a minority or female undergraduate student to work on projects that are part of the Lab's research program or directly related to the scientific or engineering aspects of the research program. JSA will provide funds to support the student at the

  10. DOE Challenge Home Comprehensive Building Science Webinar (Text...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Comprehensive Building Science Webinar (Text Version) DOE Challenge Home Comprehensive Building Science Webinar (Text Version) Below is the text version of the webinar, DOE Zero...

  11. Home Energy Score Pilot Analysis Webinar (Text Version) | Department...

    Energy Saver

    Home Energy Score Pilot Analysis Webinar (Text Version) Home Energy Score Pilot Analysis Webinar (Text Version) Below is a text version of the webinar titled "Home Energy Score: ...

  12. Home Energy Score Program Update Webinar (Text Version) | Department...

    Energy Saver

    Webinar (Text Version) Home Energy Score Program Update Webinar (Text Version) Below is a text version of the webinar titled "Home Energy Score: Program Update for Interested ...

  13. Secretary Moniz Tours the 3D-Printed Shelby Cobra | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Secretary Moniz Tours the 3D-Printed Shelby Cobra Secretary Moniz Tours the 3D-Printed Shelby Cobra April 23, 2015 - 1:45pm Addthis This Shelby was printed at the Department of Energy’s Manufacturing Demonstration Facility at Oak Ridge National Laboratory (ORNL) using the BAAM (Big Area Additive Manufacturing) machine and is intended as a “plug-n-play” laboratory on wheels where sustainable components can be tested and enhanced in real time. This Shelby was printed at the

  14. ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    efforts of the the lab's Additive Manufacturing Integrated Energy (AMIE) demonstration. ... by natural gas, were both printed using additive manufacturing via a large-scale 3D ...

  15. V-148: Novell iPrint Client Unspecified Buffer Overflow Vulnerability

    Energy.gov [DOE]

    A vulnerability has been reported in Novell iPrint Client, which can be exploited by malicious people to compromise a user's system

  16. Secretary Moniz Tours the 3D-Printed Shelby Cobra | Department...

    Energy Saver

    in Knoxville, Tennessee, developed a finishing process that bonds the clear coat and paint layers to the printed car parts' resulting in the highest quality finish possible in...

  17. EERE Success Story-3D Printing Enables New Generation of Heat Exchangers

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 3D Printing Enables New Generation of Heat Exchangers EERE Success Story-3D Printing Enables New Generation of Heat Exchangers March 17, 2016 - 10:32am Addthis The University of Maryland used direct metal printing—a 3D printing technology—to manufacture a unique miniaturized air-to-refrigerant heat exchanger as a single, continuous piece. Image: University of Maryland, Center for Environmental Energy Engineering. The University of Maryland used direct metal

  18. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy The 3D-Printed Shelby Cobra: Defining Rapid Innovation The 3D-Printed Shelby Cobra: Defining Rapid Innovation April 24, 2015 - 9:00am Addthis The 3D-Printed Shelby Cobra: Defining Rapid Innovation img-1294_crop.jpg It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal building lobby after visiting for two weeks. Secretary Moniz dropped in for a

  19. Webinar: National Hydrogen Safety Training Resource for Emergency Responders

    Office of Energy Efficiency and Renewable Energy (EERE)

    Text version and video recording of the Fuel Cell Technologies Office webinar titled "National Hydrogen Safety Training Resource for Emergency Responders," originally presented on March 24, 2015.

  20. Webinar: National Hydrogen Safety Training Resource for Emergency...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Safety Training Resource for Emergency Responders Webinar: National Hydrogen Safety ... Below is the text version of the webinar titled "National Hydrogen Safety Training ...

  1. Eddy current gauge for monitoring displacement using printed circuit coil

    DOEpatents

    Visioli, Jr., Armando J.

    1977-01-01

    A proximity detection system for non-contact displacement and proximity measurement of static or dynamic metallic or conductive surfaces is provided wherein the measurement is obtained by monitoring the change in impedance of a flat, generally spiral-wound, printed circuit coil which is excited by a constant current, constant frequency source. The change in impedance, which is detected as a corresponding change in voltage across the coil, is related to the eddy current losses in the distant conductive material target. The arrangement provides for considerable linear displacement range with increased accuracies, stability, and sensitivity over the entire range.

  2. Polarized quantum dot emission in electrohydrodynamic jet printed photonic crystals

    SciTech Connect

    See, Gloria G.; Xu, Lu; Nuzzo, Ralph G.; Sutanto, Erick; Alleyne, Andrew G.; Cunningham, Brian T.

    2015-08-03

    Tailored optical output, such as color purity and efficient optical intensity, are critical considerations for displays, particularly in mobile applications. To this end, we demonstrate a replica molded photonic crystal structure with embedded quantum dots. Electrohydrodynamic jet printing is used to control the position of the quantum dots within the device structure. This results in significantly less waste of the quantum dot material than application through drop-casting or spin coating. In addition, the targeted placement of the quantum dots minimizes any emission outside of the resonant enhancement field, which enables an 8× output enhancement and highly polarized emission from the photonic crystal structure.

  3. System and method for 3D printing of aerogels

    DOEpatents

    Worsley, Marcus A.; Duoss, Eric; Kuntz, Joshua; Spadaccini, Christopher; Zhu, Cheng

    2016-03-08

    A method of forming an aerogel. The method may involve providing a graphene oxide powder and mixing the graphene oxide powder with a solution to form an ink. A 3D printing technique may be used to write the ink into a catalytic solution that is contained in a fluid containment member to form a wet part. The wet part may then be cured in a sealed container for a predetermined period of time at a predetermined temperature. The cured wet part may then be dried to form a finished aerogel part.

  4. text_sunshot_rtc.docx | Department of Energy

    Energy Saver

    text_sunshot_rtc.docx text_sunshot_rtc.docx text_sunshot_rtc.docx text_sunshot_rtc.docx (12.94 KB) More Documents & Publications SunShot Summit: Regional Test Centers text_sunshot_csp.docx text_sunshot_pdil.docx

  5. How a Geothermal Power Plant Works (Simple) - Text Version |...

    Energy.gov [DOE] (indexed site)

    Geothermal Power Plant Works. This animation is meant to convey in simple terms what happens in the operation of a geothermal power plant. Aspects such as exploration, resource...

  6. Solar Resource Assessment

    SciTech Connect

    Renne, D.; George, R.; Wilcox, S.; Stoffel, T.; Myers, D.; Heimiller, D.

    2008-02-01

    This report covers the solar resource assessment aspects of the Renewable Systems Interconnection study. The status of solar resource assessment in the United States is described, and summaries of the availability of modeled data sets are provided.

  7. LANSCE | User Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    From the initial proposal process to the completion of the experiment, LANSCE provides its users with resources critical to their experiements and their experience. Lujan Resources pRad Resources WNR Resources Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules

  8. Resources | Department of Energy

    Energy.gov [DOE] (indexed site)

    Filter by Audience Filter by Resource Type description partneragency resourcetype stakeholdergroup publicationdate nodeurl link Careers & Internships EERE Home Contact EERE ...

  9. Business Planning Resources

    Energy.gov [DOE]

    Business Planning Resources, a presentation of the U.S. Department of Energy's Better Buildings Neighborhood Program.

  10. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OneDOE » Resources Resources Resources Office of Diversity & Inclusion The Office of Diversity and Inclusion provides training, education, and awareness to DOE employees, managers and supervisors on how to achieve and sustain a diverse workforce and inclusive workplace. The Office supports the Department's Diversity and Inclusion Council and manages employee resource groups which are open to all employees and share a common goal of supporting, celebrating, retaining, and attracting a

  11. Hydrothermal Resources Fact Sheet

    SciTech Connect

    U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy

    2012-08-31

    This two-page fact sheet provides an overview of hydrothermal resources and hydrothermal reservoir creation and operation.

  12. Development and Optimization of Viable Human Platforms through 3D Printing

    SciTech Connect

    Parker, Paul R.; Moya, Monica L.; Wheeler, Elizabeth K.

    2015-08-21

    3D printing technology offers a unique method for creating cell cultures in a manner far more conducive to accurate representation of human tissues and systems. Here we print cellular structures capable of forming vascular networks and exhibiting qualities of natural tissues and human systems. This allows for cheaper and readily available sources for further study of biological and pharmaceutical agents.

  13. text_sunshot_pdil.docx | Department of Energy

    Energy Saver

    pdil.docx text_sunshot_pdil.docx text_sunshot_pdil.docx text_sunshot_pdil.docx (13.13 KB) More Documents & Publications SunShot Summit: Process Development and Integration Laboratory text_sunshot_rtc.docx text_sunshot_csp

  14. Browse by Discipline -- E-print Network Subject Pathways: Biotechnolog...

    Office of Scientific and Technical Information (OSTI)

    Yang) - Department of Geological Sciences, University of Texas at Austin Yeh, T.-C. Jim (T.-C. Jim Yeh) - Department of Hydrology and Water Resources, University ...

  15. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    Idaho State University, Department of Biological Sciences, Stream Ecology Center Idaho, University of - Department of Fish and Wildlife Resources, Fish Ecology Research Laboratory ...

  16. Browse by Discipline -- E-print Network Subject Pathways: Power...

    Office of Scientific and Technical Information (OSTI)

    of Biology, Missouri State University Waits, Lisette (Lisette Waits) - Department of Fish and Wildlife Resources, University of Idaho Wakano, Joe Yuichiro (Joe Yuichiro Wakano) ...

  17. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Jacobson, Arne (Arne Jacobson) - Department of Environmental Resources Engineering, Humboldt State University Jacobson, Mark (Mark Jacobson) - Department of Civil and Environmental ...

  18. Browse by Discipline -- E-print Network Subject Pathways: Environmenta...

    Office of Scientific and Technical Information (OSTI)

    Resources, University of Alberta Mallick, Rajib B. (Rajib B. Mallick) - Department of Civil and Environmental Engineering, Worcester Polytechnic Institute McCready, Mark J. (Mark ...

  19. Browse by Discipline -- E-print Network Subject Pathways: Plasma...

    Office of Scientific and Technical Information (OSTI)

    Resources, University of Washington Dupont, R. Ryan (R. Ryan Dupont) - Department of Civil and Environmental Engineering, Utah State University Go back to Individual Researchers ...

  20. Multi-Layer Inkjet Printed Contacts for Silicon Solar Cells: Preprint

    SciTech Connect

    Curtis, C. J.; van hest, M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

    2006-05-01

    Ag, Cu, and Ni metallizations were inkjet printed with near vacuum deposition quality. The approach developed can be easily extended to other conductors such as Pt, Pd, Au, etc. Thick highly conducting lines of Ag and Cu demonstrating good adhesion to glass, Si, and printed circuit board (PCB) have been printed at 100-200 C in air and N2 respectively. Ag grids were inkjet-printed on Si solar cells and fired through the silicon nitride AR layer at 850 C, resulting in 8% cells. Next generation inks, including an ink that etches silicon nitride, have now been developed. Multi-layer inkjet printing of the etching ink followed by Ag ink produced contacts under milder conditions and gave solar cells with efficiencies as high as 12%.

  1. An RFC 1179 Compatible Remote Print Server for Windows 3.1

    Energy Science and Technology Software Center

    1993-11-09

    Internet RFC 1179 describes the protocol to be used for printing files on a remote printer in a TCP/IP network. The protocol is client/server, meaning that the client initiates the print request, and the server receives the request and performs the actual printing locally. This protocol has been in long use on Unix systems derived from the Berkeley Software Distribution, such as DEC''s Ultrix and Sun''s SunOS. LPD Services implements the server portion of thismore » protocol. It handles both the network communication and conformance with the protocol, and printing using the Microsoft Windows device independent printing interface.« less

  2. NREL: Resource Assessment and Forecasting - Data and Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Data and Resources National Solar Radiation Database NREL resource assessment and forecasting research information is available from the following sources. Renewable Resource Data ...

  3. NREL: Renewable Resource Data Center - Solar Resource Data

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Data The following solar resource data collections can be found in the Renewable Resource Data Center (RReDC). Cooperative Networks for Renewable Resource Measurements (CONFRRM)...

  4. Pioneering Inkjet Printing Technology Produces Thin-Film Photovoltaics; The Spectrum of Clean Energy Innovation (Fact Sheet)

    SciTech Connect

    Not Available

    2010-06-01

    Fact sheet describing NREL's development of inkjet printing technology that can be used to produce thin-film solar modules.

  5. 3D%20printed%20perforated%20metal%20box.jpg | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information 3D%20printed%20perforated%20metal%20box

  6. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    print version Departments Benefits Compensation Employee Relations Employment JLab Registration / International Services Training and Performance Office Job Related Training & Education Reimbursement Procedures Employee Concerns Program (ECP) Quick Find A B C D E F G H I J K L M N O P Q R S T U V W X Y Z The following forms are listed alphabetically and may be downloaded, filled out and sent to the appropiate office: Note: The forms listed on this page are PDF. Acrobat Reader (4.0) is

  7. Resource Analysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems Analysis » Analysis Methodologies » Resource Analysis Resource Analysis Resource Analysis determines the quantity and location of resources needed to produce hydrogen. Additionally, resource analysis quantifies the cost of the resources, as a function of the amount that can be available for hydrogen production. While often associated with renewable resources, resource analysis is also suitable for fossil resources and existing production facilities. Geographic Information Systems (GIS)

  8. Text-Alternative Version: Hitting the Target: ENERGY STAR® SSL...

    Energy Saver

    Hitting the Target: ENERGY STAR SSL Outdoor Area Lighting Text-Alternative Version: Hitting the Target: ENERGY STAR SSL Outdoor Area Lighting Below is the text-alternative ...

  9. Video, Audio, and Animation Text Versions for Web Accessibility...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Videos, Animations, & Audio Video, Audio, and Animation Text Versions for Web Accessibility Video, Audio, and Animation Text Versions for Web Accessibility For accessibility, ...

  10. Gradient Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Gradient Resources Jump to: navigation, search Logo: Gradient Resources Name: Gradient Resources Address: 9670 Gateway Drive, Suite 200 Place: Reno, Nevada Zip: 89521 Region:...

  11. Video, Audio, and Animation Text Versions for Web Accessibility |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Video, Audio, and Animation Text Versions for Web Accessibility Video, Audio, and Animation Text Versions for Web Accessibility For accessibility, Section 508 requires text versions of video, audio, and animations. Follow the Office of Energy Efficiency and Renewable Energy's (EERE's) requirements for developing a text version for a video, audio file, or animation. Requirements Follow these requirements for developing a text version for a video, audio file, or animation.

  12. Impact of pulse thermal processing on the properties of inkjet printed metal and flexible sensors

    DOE PAGES [OSTI]

    Joshi, Pooran C.; Kuruganti, Teja; Killough, Stephen M.

    2015-03-11

    In this paper, we report on the low temperature processing of environmental sensors employing pulse thermal processing (PTP) technique to define a path toward flexible sensor technology on plastic, paper, and fabric substrates. Inkjet printing and pulse thermal processing technique were used to realize mask-less, additive integration of low-cost sensors on polymeric substrates with specific focus on temperature, humidity, and strain sensors. The printed metal line performance was evaluated in terms of the electrical conductivity characteristics as a function of post-deposition thermal processing conditions. The PTP processed Ag metal lines exhibited high conductivity with metal sheet resistance values below 100more » mΩ/{whitesquare} using a pulse width as short as 250 μs. The flexible temperature and relative humidity sensors were defined on flexible polyimide substrates by direct printing of Ag metal structures. The printed resistive temperature sensor and capacitive humidity sensor were characterized for their sensitivity with focus on future smart-building applications. Strain gauges were printed on polyimide substrate to determine the mechanical properties of the silver nanoparticle films. Finally, the observed electrical properties of the printed metal lines and the sensitivity of the flexible sensors show promise for the realization of a high performance print-on-demand technology exploiting low thermal-budget PTP technique.« less

  13. Apparatus And Method Of Using Flexible Printed Circuit Board In Optical Transceiver Device

    DOEpatents

    Anderson, Gene R.; Armendariz, Marcelino G.; Bryan, Robert P.; Carson, Richard F.; Duckett, III, Edwin B.; McCormick, Frederick B.; Peterson, David W.; Peterson, Gary D.; Reysen, Bill H.

    2005-03-15

    This invention relates to a flexible printed circuit board that is used in connection with an optical transmitter, receiver or transceiver module. In one embodiment, the flexible printed circuit board has flexible metal layers in between flexible insulating layers, and the circuit board comprises: (1) a main body region orientated in a first direction having at least one electrical or optoelectronic device; (2) a plurality of electrical contact pads integrated into the main body region, where the electrical contact pads function to connect the flexible printed circuit board to an external environment; (3) a buckle region extending from one end of the main body region; and (4) a head region extending from one end of the buckle region, and where the head region is orientated so that it is at an angle relative to the direction of the main body region. The electrical contact pads may be ball grid arrays, solder balls or land-grid arrays, and they function to connect the circuit board to an external environment. A driver or amplifier chip may be adapted to the head region of the flexible printed circuit board. In another embodiment, a heat spreader passes along a surface of the head region of the flexible printed circuit board, and a window is formed in the head region of the flexible printed circuit board. Optoelectronic devices are adapted to the head spreader in such a manner that they are accessible through the window in the flexible printed circuit board.

  14. Resources | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Publications Downloads News & Events Argonne National Laboratory Integrated Imaging Institute About Research People Resources News & Events Resources Publications Downloads Resources The tangible outcomes of the Integrated Imaging Institute's research projects are the publication of research journal papers, and the development of software and tools that can be spun out to the wider imaging community. Information about these developments is included here, in addition to links to other

  15. Resources | Critical Materials Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources The Critical Materials Institute offers connections to resources, including: CMI Annual Report (page includes link pdf of 20-page report) List of resources U.S. Rare Earth Magnet Patents Table Government agency contacts CMI unique facilities CMI recent presentations Photographs via Flick'r: Critical Materials Institute, The Ames Laboratory Videos from The Ames Laboratory Webinars from Colorado School of Mines To offer comments on the CMI website or to ask questions, please contact us

  16. Contacts & Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contacts & Resources Contacts & Resources Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 envoutreach@lanl.gov Public Information Los Alamos National Laboratory environmental website Public meetings and tours Mailing and emailing lists Public notification in local newspapers Events calendar Intellus database Information repositories Resources Illustrated Long-Term Strategy for Environmental Stewardship and Sustainability

  17. Text and Structural Data Mining of Influenza Mentions in Web and Social Media

    SciTech Connect

    Corley, Courtney D.; Cook, Diane; Mikler, Armin R.; Singh, Karan P.

    2010-02-22

    Text and structural data mining of Web and social media (WSM) provides a novel disease surveillance resource and can identify online communities for targeted public health communications (PHC) to assure wide dissemination of pertinent information. WSM that mention influenza are harvested over a 24-week period, 5-October-2008 to 21-March-2009. Link analysis reveals communities for targeted PHC. Text mining is shown to identify trends in flu posts that correlate to real-world influenza-like-illness patient report data. We also bring to bear a graph-based data mining technique to detect anomalies among flu blogs connected by publisher type, links, and user-tags.

  18. I/O Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    I/O Resources I/O Resources Motivation Many users must run jobs that read datasets that are too large to transfer to the /scratch directory. When large numbers of these jobs run simultaneously, it can have an adverse affect on the performance of the disks serving the data causing your jobs to run very inefficiently. We have configured a resource in the batch system that should help manage the amount of concurrent access. These are called IO resources, and they depend on the bandwidth available

  19. Resources | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Career Postdoctoral Factsheet: Before You Arrive Newsletters Professional Development Mentoring Resources Postdoctoral Society of Argonne LinkedIn Group National Postdoctoral...

  20. Central American resource studies

    SciTech Connect

    Van Eeckhout, E.; Laughlin, A.W.

    1989-01-01

    Los Alamos National Laboratory has been working with five Central American countries to assist in the development of their energy and mineral resources. Since 1985, mineral resources in Costa Rica, peat resources in Costa Rica and Panama, geothermal energy resources in Honduras and Guatemala, and geothermal field development in El Salvador and Costa Rica have been topics of study. This paper presents an overview of this work -- within these proceedings are papers that deal with specific aspects of each topic, and these will be duly noted. 15 refs., 4 figs.

  1. Resources for Local Policymakers

    SciTech Connect

    SEE Action

    2012-06-01

    Provides a summary of State and Local Energy Efficiency Action Network (SEE Action) information resources available to local policymakers, organized by topic.

  2. Resources for Utility Regulators

    SciTech Connect

    SEE Action

    2012-06-01

    Provides a summary of State and Local Energy Efficiency Action Network (SEE Action) information resources available to utility regulators, organized by topic.

  3. Renewable Resource Standard

    Energy.gov [DOE]

    Eligible Technologies Eligible renewable resources include wind; solar; geothermal; existing hydroelectric projects (10 megawatts or less); certain new hydroelectric projects (up to 15 megawatts...

  4. Jefferson Lab - Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    https:www.jlab.orgresources

    Resources04.png"...

  5. Energy Efficiency Resource Standard

    Energy.gov [DOE]

    Washington voters passed Initiative 937 in 2006, creating a renewable energy standard and an energy efficiency resource standard for the state's electric utilities. Initiative 937, enacted as th...

  6. Manhattan Project: Resources

    Office of Scientific and Technical Information (OSTI)

    In addition to the events, people, places, processes, and science pages that comprise the bulk of this web site, a number of additional resources are also provided: Reference ...

  7. Visual Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Visual Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleVisualResources&oldid612333...

  8. Range Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Range Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleRangeResources&oldid612320...

  9. Interconnection Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Interconnection Resources Interconnection Resources Interconnection is the technical procedures and legal requirements surrounding energy customers' ability to connect their ...

  10. Accounting Resources | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Accounting Resources Ames Laboratory Human Resources Forms Ames Laboratory Travel Forms Ames Laboratory Forms (Select Department) ISU Intramural PO Request...

  11. Direct laser immobilization of photosynthetic material on screen printed electrodes for amperometric biosensor

    SciTech Connect

    Boutopoulos, Christos; Zergioti, Ioanna; Touloupakis, Eleftherios; Pezzotti, Ittalo; Giardi, Maria Teresa

    2011-02-28

    This letter demonstrates the direct laser printing of photosynthetic material onto low cost nonfunctionalized screen printed electrodes for the fabrication of photosynthesis-based amperometric biosensors. The high kinetic energy of the transferred material induces direct immobilization of the thylakoids onto the electrodes without the use of linkers. This type of immobilization is able to establish efficient electrochemical contact between proteins and electrode, stabilizing the photosynthetic biomolecule and transporting electrons to the solid state device with high efficiency. The functionality of the laser printed biosensors was evaluated by the detection of a common herbicide such as Linuron.

  12. EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Unique Ability to Power One Another | Department of Energy ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another November 17, 2015 - 10:42am Addthis EERE Success Story—ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another In September, the Department of Energy's Oak Ridge National Laboratory (ORNL) announced successful

  13. The Future of Manufacturing Takes Shape: 3D Printed Car on Display at

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Summit | Department of Energy The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit September 17, 2014 - 9:50am Addthis WORLD&#039;S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak

  14. Get science-Access E-print Network for current research documents,

    Office of Scientific and Technical Information (OSTI)

    researchers' Web sites, and scientific societies | OSTI, US Dept of Energy Office of Scientific and Technical Information science-Access E-print Network for current research documents, researchers' Web sites, and scientific societies Back to the OSTI News Listing for 2007 Gain access to more than 1 million e-print science documents, over 25,000 Web sites, and links to more than 2,900 scientific societies at OSTI's E-print Network, a fast-growing searchable scientific communications network.

  15. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy The 3D-Printed Shelby Cobra: Defining Rapid Innovation The 3D-Printed Shelby Cobra: Defining Rapid Innovation "He said he’d get in if he could drive." "He said he'd get in if he could drive." It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal building lobby after visiting for two weeks. Secretary Moniz dropped in for a

  16. Technical Note: Characterization of custom 3D printed multimodality imaging phantoms

    SciTech Connect

    Bieniosek, Matthew F.; Lee, Brian J.; Levin, Craig S.

    2015-10-15

    Purpose: Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial “Micro Deluxe” phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features. Methods: CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed. Results: Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide. Conclusions: This work shows that 3D printed

  17. Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Princeton Plasma Physics Lab Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers By John Greenwald October 28, 2014 Tweet Widget Google Plus One Share on Facebook Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. (Photo by Elle Starkman/PPPL Office of Communications) Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. Gallery: Completed stainless steel and copper mirror system. (Photo by Elle

  18. Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Princeton Plasma Physics Lab Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers By John Greenwald October 28, 2014 Tweet Widget Google Plus One Share on Facebook Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. (Photo by Elle Starkman/PPPL Office of Communications) Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. Gallery: Completed stainless steel and copper mirror system. (Photo by Elle

  19. Inclusion in the Workplace - Text Version | Careers | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Inclusion in the Workplace - Text Version This is the text version for the Inclusion in the Workplace video. Manajit Sengupta: I work at NREL because of primarily the challenges, ...

  20. DOE Challenge Home Better Business for Builders Webinar (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is a text version of the webinar titled "DOE Challenge Home: Better Business for Builders," originally presented in May 2012. In addition to this text version of the audio, you can access the...

  1. EECLP Webinar #6: Solar Program Overview-- Text Version

    Energy.gov [DOE]

    Below is the text version of the EECLP Webinar 6: Solar Program Overview, presented in January 2015.

  2. Text-Alternative Version: Smithsonian GATEWAY Demonstration Video

    Energy.gov [DOE]

    Following is a text version of a video about the GATEWAY demonstration project at the Smithsonian American Art Museum.

  3. EECBG Strategies and Considerations Approaching Lenders Webcast (Text Version)

    Energy.gov [DOE]

    Below is a text version of the December 3, 2009 What Drives Consumer Borrowing for Energy Efficiency?

  4. Building America: Score with Indoor Air Quality Webinar (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Here you find the text version of the webinar, Building America: Score with Indoor Air Quality, presented in October 2016.

  5. EECLP Webinar #1: Overview and Cost Effectiveness-- Text Version

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text version of the webinar, EECLP Webinar 1: Overview and Cost Effectiveness, presented in December 2014.

  6. National Residential Efficiency Measures Database Unveiled (text version) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy National Residential Efficiency Measures Database Unveiled (text version) National Residential Efficiency Measures Database Unveiled (text version) Below is the text version of the Webinar titled "National Residential Efficiency Measures Database Unveiled," originally presented on January 18, 2011. In addition to this text version of the audio, you can view the presentation slides and a recording of the Webinar (WMV 47 MB). Operator: Welcome to today's webinar.

  7. Strengthening the Workforce in Better Buildings Neighborhoods (Text Version)

    Energy.gov [DOE]

    Below is a text version of the Better Buildings Neighborhood Program "Strengthening the Workforce in Better Buildings Neighborhoods" video.

  8. Structuring Credit Enhancements for Clean Energy Finance Programs (Text Version)

    Energy.gov [DOE]

    Below is a text version of the January 15, 2010 Structuring Loan Loss Reserve Funds for Clean Energy Finance Programs.

  9. DOE Challenge Home Comprehensive Building Science Webinar (Text Version)

    Energy.gov [DOE]

    Below is the text version of the webinar, DOE Zero Energy Ready Home - Comprehensive Building Science, presented in March 2014.

  10. Hydroelectric Webinar Presentation Slides and Text Version | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Hydroelectric Webinar Presentation Slides and Text Version Hydroelectric Webinar Presentation Slides and Text Version Download presentation slides and a text version of the audio from the DOE Office of Indian Energy webinar on hydroelectric renewable energy. DOE-IE_Foundational_Hydroelectric_PresentationSlides.pdf (4.03 MB) DOE-IE_Foundational_Hydroelectric_TextVersion.pdf (149.28 KB) More Documents & Publications EA-1933: Final Environmental Assessment CX-003191: Categorical

  11. Geothermal Webinar Presentation Slides and Text Version | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Geothermal Webinar Presentation Slides and Text Version Geothermal Webinar Presentation Slides and Text Version Download presentation slides and a text version of the audio from the DOE Office of Indian Energy webinar on geothermal renewable energy. DOE-IE_Foundational_Geothermal_PresentationSlides.pdf (5.69 MB) DOE-IE_Foundational_Geothermal_TextVersion.pdf (144.65 KB) More Documents & Publications Overview of Geothermal Energy Development Webcast Geothermal Energy: A Geothermal

  12. Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency

    Energy.gov [DOE]

    Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and novel semiconductors.

  13. "Printing" Tiny Batteries | U.S. DOE Office of Science (SC)

    Office of Science (SC)

    ... Lewis' group has greatly expanded the capabilities of 3D printing. They have designed a broad range of functional inks-inks with useful chemical and electrical properties. And they ...

  14. Global Wind Day 2016 - AMO's Role in Applying 3D Printing to...

    Energy.gov [DOE] (indexed site)

    Global Wind Day 2016 AMOs Role in Applying 3D Printing to Wind Blade Mold Manufacturing Global Wind Day is a worldwide event that occurs annually on June 15 and is ...

  15. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left ...

  16. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Description This Web Log provides the latest information about changes to E-print Network ... questions, concerns and other input by using the Contact Us page. Web Log Archive

  17. Frequently Asked Questions (FAQ) for the E-print Network -- Energy...

    Office of Scientific and Technical Information (OSTI)

    ... The E-print Network pulls these vast and widely dispersed data together through a Deep Web ... available on the Web through a browse capability across more than ten thousand sites. ...

  18. EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    This innovative 3D printing process took just six weeks, and the final result was a glistening roadster fitted with a 100-kilowatt electric motor that can still go zero to 60 mph ...

  19. Researchers find 3-D printed parts to provide low-cost, custom...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on ...

  20. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    promote energy security, protect the interests of taxpayers, and safeguard the health of the environment. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print Management...

  1. Analytical Study on Thermal and Mechanical Design of Printed Circuit Heat Exchanger

    SciTech Connect

    Su-Jong Yoon; Piyush Sabharwall; Eung-Soo Kim

    2013-09-01

    The analytical methodologies for the thermal design, mechanical design and cost estimation of printed circuit heat exchanger are presented in this study. In this study, three flow arrangements of parallel flow, countercurrent flow and crossflow are taken into account. For each flow arrangement, the analytical solution of temperature profile of heat exchanger is introduced. The size and cost of printed circuit heat exchangers for advanced small modular reactors, which employ various coolants such as sodium, molten salts, helium, and water, are also presented.

  2. Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    breakage over time | Argonne National Laboratory Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to breakage over time By Katie Elyce Jones * March 4, 2016 Tweet EmailPrint Titanium is strong but light - a desirable property among metals. In the twentieth century, titanium was used in military aircraft and equipment and commercial jets. Today, we find this tough and flexible metal all around us - in sports gear, tools, surgical and dental implants, prosthetics,

  3. Bioenergy in a Multifunctional Landscape- Text-Alt Version

    Energy.gov [DOE]

    How can our landscapes be managed most effectively to produce crops for food, feed, and bioenergy, while also protecting our water resources by preventing the loss of nutrients from the soil? Dr. Cristina Negri and her team at the U.S. Department of Energy’s Argonne National Laboratory are tackling this question at an agricultural research site located in Fairbury, Illinois.

  4. Inkjet Printed Metallizations for Cu(In1-xGax)Se2 Photovoltaic Cells

    SciTech Connect

    Hersh, P. A.; Curtis, C. J.; van Hest, M. F. A. M.; Kreuder, J. J.; Pasquarelli, R.; Miednaer, A.; Ginley, D. S.

    2011-12-01

    This study reports the inkjet printing of Ag front contacts on Aluminum doped Zinc Oxide (AZO)/intrinsic Zinc Oxide (i-ZnO)/CdS/Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (CIGS)/Mo thin film photovoltaic cells. The printed Ag contacts are being developed to replace the currently employed evaporated Ni/Al bi-layer contacts. Inkjet deposition conditions were optimized to reduce line resistivity and reduce contact resistance to the Al:ZnO layer. Ag lines printed at a substrate temperature of 200 C showed a line resistivity of 2.06 {mu}{Omega} {center_dot} cm and a contact resistance to Al:ZnO of 8.2 {+-} 0.2 m{Omega} {center_dot} cm{sup 2} compared to 6.93 {+-} 0.3 m{Omega} {center_dot} cm{sup 2} for thermally evaporated contacts. These deposition conditions were used to deposit front contacts onto high quality CIGS thin film photovoltaic cells. The heating required to print the Ag contacts caused the performance to degrade compared to similar devices with evaporated Ni/Al contacts that were not heated. Devices with inkjet printed contacts showed 11.4% conversion efficiency compared to 14.8% with evaporated contacts. Strategies to minimize heating, which is detrimental for efficiency, during inkjet printing are proposed.

  5. Screening tests of conformally-coated printed wiring boards

    SciTech Connect

    Skibo, M.D.; Even, W.R.

    1982-03-01

    Identical printed wiring boards (PWB) were fabricated using glass-triazene as substrates and were conformally coated with either conothane or parylene. The boards were then placed in sealed canisters along with TATB and other organic materials found in recent weapon systems. While subjected to electrical potentials of 120V and 250V, these PWBs were either aged at 60/sup 0/, 70/sup 0/, or 80/sup 0/ or temperature cycled for as long as 16 months. The resistivities of the boards were precisely measured before and after aging to determine the effect of time, temperature, and environment on the electrical characteristics of board materials. In all cases board resistivity increased with temperature and duration of test. This increase was believed to be related to either a reduction in water content in the board substrate or a completion of cure of the conformal coating with time elevated temperature. Both mechanisms would result in a reduction in conductive species. In spite of high humidity levels, no evidence of current - activated filament formation between adjacent active circuit paths on aged PWBs was seen. Similarly, soldered contacts were free of thermally-induced fatigue damage after as many as 500 cycles between -54 and 70/sup 0/C at 1 cycle/day.

  6. Selling Zero Energy Ready Homes Made Easy Webinar (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Selling Zero Energy Ready Homes Made Easy Webinar (Text Version) Selling Zero Energy Ready Homes Made Easy Webinar (Text Version) Below is the text version of the webinar Selling Zero Energy Ready Homes Made Easy, presented in October 2015. Watch the presentation. Lindsay Parker: Presentation cover slide: Hi, everyone. Welcome to the Department of Energy Zero Energy Ready Home technical training webinar series. We're really excited that you can join us here today for a

  7. DOE Zero Energy Ready Home Webinar: Lighting Efficiency (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Zero Energy Ready Home Webinar: Lighting Efficiency (Text Version) DOE Zero Energy Ready Home Webinar: Lighting Efficiency (Text Version) Below is the text version of the webinar, DOE Zero Energy Ready Home: Lighting Efficiency, presented in May 2015. Watch the presentation. Alex Krowka: Presentation cover slide: ... join us today for this session on LED lighting design for Zero Energy Ready Homes, to be presented by Brooke Silber of Jan & Brooke Luminae and David

  8. ZERH Webinar: Tour of Zero and Innovation Partner (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Tour of Zero and Innovation Partner (Text Version) ZERH Webinar: Tour of Zero and Innovation Partner (Text Version) Here is the text version of the webinar Tour of Zero and Innovation Partner, presented in October 2016. Watch the presentation. Ally Waranowski: First presentation slide: Hi, everyone. First, happy Halloween! Second, welcome to the DOE Zero Energy Ready Home's Innovation Partnerships webinar. We're really excited that you can join us today for this update

  9. Cost Principles Webinar for DOE Grant Recipients - Text Version |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Cost Principles Webinar for DOE Grant Recipients - Text Version Cost Principles Webinar for DOE Grant Recipients - Text Version Following is a text transcript of the April 2011 Cost Principles Webinar for DOE Grant Recipients. Title Slide: Cost Principles Webinar for DOE Grant Recipients U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Golden Field Office April 2011 Narration: The following webinar can be used as a reference tool for recipients

  10. Technology Innovation at the National Renewable Energy Laboratory (Text

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Version) | NREL Technology Innovation at the National Renewable Energy Laboratory (Text Version) This is the text version for the Technology Innovation at NREL video. [intro music] The video opens with a blue background and the white NREL logo centered on the screen. The video switches to a blue screen with the title of the video, "Technology Innovation at that National Renewable Energy Laboratory" in white text centered on the screen. Kristin Gray (Director, NREL Technology

  11. Project Profile: Helios: Understanding Solar Evolution through Text

    Energy Saver

    Analytics | Department of Energy Helios: Understanding Solar Evolution through Text Analytics Project Profile: Helios: Understanding Solar Evolution through Text Analytics Logo of SRI International. SRI International, under the Solar Energy Evolution and Diffusion Studies (SEEDS) program, is developing a new system for large-scale text analytics, called Helios, to isolate and map recurring patterns of technology evolution through the inspection of thousands of published technical documents.

  12. BENEFIT 2016 Funding Opportunity - Full Applications Webinar (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 2016 Funding Opportunity - Full Applications Webinar (Text Version) BENEFIT 2016 Funding Opportunity - Full Applications Webinar (Text Version) Here is the text version of the webinar BENEFIT 2016 Funding Opportunity - Full Applications, presented in March 2016. Watch the presentation. Karma Sawyer: Presentation cover slide: Good afternoon, everyone. Welcome to our webinar. Thank-you for your interest in the U.S. Department of Energy's efforts on renewable energy and

  13. BENEFIT Funding Opportunity 2016 Webinar #1 (Text Version) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Funding Opportunity 2016 Webinar #1 (Text Version) BENEFIT Funding Opportunity 2016 Webinar #1 (Text Version) Below is the text version of the BENEFIT Funding Opportunity 2016 Webinar #1, presented in December 2015. Watch the presentation. Karma Sawyer: Presentation cover slide: We are here today for a webinar regarding the 2016 BENEFIT FOA. "BENEFIT" stands for Buildings Energy Efficiency Frontiers and Innovation Technologies. The BENEFIT FOA was released by the Emerging

  14. Small Business Program (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Small Business Program (Text Version) Small Business Program (Text Version) This is the text version for the images on the EERE Small Business Program page. North American Industry Classification System This pie chart shows the top ten North American Industry Classification System codes used by businesses working with the Department of Energy in September 2015. They are 541611: Administrative Management and General Management Consulting Services: $35,932,769; 541330: Engineering Services:

  15. Text-Alternative Version: Using the Street and Parking Facility...

    Energy Saver

    Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool Text-Alternative Version: Using the Street and Parking Facility Lighting Retrofit Financial Analysis ...

  16. Fuel Cell Animation- Fuel Cell Stack (Text Version)

    Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  17. Fuel Cell Animation- Fuel Cell Components (Text Version)

    Energy.gov [DOE]

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts.

  18. DOE Zero Energy Home Webinar: Comprehensive Building Science (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text version of the webinar, DOE Zero Energy Ready Home - Comprehensive Building Science, presented in March 2014. Watch the presentation.

  19. BENEFIT 2015 Funding Opportunity Announcement Webinar 1 (Text Version)

    Energy.gov [DOE]

    Below is the text version of the webinar, BENEFIT 2015 Funding Opportunity Announcement, presented in October 2014 by Antonio Bouza, technology manager, and Pat Phelan, program manager, Building...

  20. Electricity Grid Basics Webinar Presentation Slides and Text Version

    Office of Energy Efficiency and Renewable Energy (EERE)

    Download presentation slides and a text version of the audio from the DOE Office of Indian Energy webinar on electricity grid basics.

  1. Text-Alternative Version: Philadelphia Market Introduction Workshop Video

    Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the July 2010 DOE SSL Market Introduction Workshop in Philadelphia, Pennsylvania.

  2. Department of Energy Critical Materials Strategy Video (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a text version of the "Department of Energy Critical Materials Strategy" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  3. National Academies Criticality Methodology and Assessment Video (Text Version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a text version of the "National Academies Criticality Methodology and Assessment" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  4. Text-Alternative Version: Seattle Market Introduction Workshop Video

    Energy.gov [DOE]

    Following is a text version of Jim Brodrick's welcome presentation video from the July 2011 DOE SSL Market Introduction Workshop in Seattle, Washington.

  5. Microsoft PowerPoint - TextAnalysis_w_Hadoop

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Scientific Computing Hadoop-based document management architecture nt Source HBase Ingest Pub M d RSS Email cumen Source Text Metadata Process Med Do Metadata Annotations Katta...

  6. Text-Alternative Version: Raleigh R&D Workshop Video

    Energy.gov [DOE]

    Following is a text version of Jim Brodrick's opening presentation video from the February 2010 DOE SSL R&D Workshop in Raleigh, North Carolina.

  7. Critical Materials Research in DOE Video (Text Version)

    Energy.gov [DOE]

    This is a text version of the "Critical Materials Research in DOE" video presented at the Critical Materials Workshop, held on April 3, 2012 in Arlington, Virginia.

  8. Biomass 2013: Register Now (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Register Now (Text Version) Biomass 2013: Register Now (Text Version) Below is the text version for the Biomass 2013: Register Now video. The Video opens with "U.S. Department of Energy Biomass 2013." The Biomass 2013 graphic is shown onscreen. Music with an opening video montage plays. A video of Chris Coons speaking at Biomass 2012 begins. The next phase of biofuels is ready to leap from the lab bench to the marketplace... Video shows pictures of Biomass 2012 conference. Text shows

  9. Text-Alternative Version of Building America Webinar: Central...

    Energy Saver

    Central Multifamily Water Heating Systems Text-Alternative Version of Building America Webinar: Central Multifamily Water Heating Systems Central Multifamily Water Heating Systems ...

  10. Vermont Agency of Natural Resources Natural Resources Atlas ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Vermont Agency of Natural Resources Natural Resources Atlas Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Vermont Agency of Natural Resources Natural...

  11. Manhattan Project: Resources

    Office of Scientific and Technical Information (OSTI)

    RESOURCES RELATING TO THE MANHATTAN PROJECT In addition to the events, people, places, processes, and science pages that comprise the bulk of this web site, a number of additional ...

  12. Energy Efficiency Resource Standard

    Energy.gov [DOE]

    In 2008, New Mexico enacted H.B. 305, the Efficient Use of Energy Act, which created an Energy Efficiency Resource Standard (EERS) for New Mexico’s electric utilities, and a requirement that all ...

  13. Response Resources Demonstration

    Energy Saver

    ... Also it wasn't clear if the fuel cell would be able to be ... In the long term, the variety of resources allows electric ... An hourly forecast for the total building load and loads ...

  14. Distributed Energy Resource Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: A series of orders issued on July 15, 2015 in  Docket 2015-53-E, Docket 2015-54-E, and Docket 2015-55-E approved the incentive programs for South Carolina's Distributed Energy Resource...

  15. Utility Metering- AGL Resources

    Energy.gov [DOE]

    Presentation—given at the Spring 2013 Federal Utility Partnership Working Group (FUPWG) meeting—discusses AGL Resources metering, including interruptible rate customers, large users, and meeting federal metering goals.

  16. Save Energy Now Resources

    SciTech Connect

    2008-03-01

    The U.S. Department of Energy (DOE) provides information resources to industrial energy users and partnering organizations to help the nation’s industrial sector save energy and improve productivity.

  17. Human Resource Management Delegation

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1996-06-28

    The notice is to clarifies and updates existing Human Resource Management Delegation Authorities and the levels to which they are delegated. Expired 6-28-97. Does not cancel any directives.

  18. ARM - CHAPS: Campaign Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ARM Data Discovery Browse Data CHAPS: Campaign Resources CHAPS Status 4-4-2007 ASP Lessons Learned 2007 CHAPS Fact Sheet Daily Flight Plan Schedule Overview of Protocol and...

  19. Evaluating New Hydropower Resources

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assessment of Energy Potential from New Stream-reach Development in the United States ... The estimated technical resource capac- ity for new stream-reach development is 84.7 GW, ...

  20. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    JLab Diversity Policies 200 Human Resources 201A Diversity & Inclusion Policy 202 Equal Employment Opportunity and Affirmative Action 203 Employment 208 Employee Performance and Conduct 209 Staff Development 210 Employee Concerns and Grievances Employee Concerns Program (ECP)

  1. Fermilab | Resources for ...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    feature photo feature photo feature photo feature photo feature photo Resources for ... Navbar Toggle About Leadership and Organization Leadership bios Organizational chart Committees and Councils Science Photo and Video Gallery History Diversity Education Safety Sustainability and Environment Contact Related Links DOE FRA UChicago URA Newsroom Spotlight Press releases Fact sheets and brochures symmetry Interactions.org Photo and video archive Resources for ... Employees Researchers, postdocs

  2. Fermilab | Resources | Industrial Partnerships

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Navbar Toggle About Leadership and Organization Leadership bios Organizational chart Committees and Councils Science Photo and Video Gallery History Diversity Education Safety Sustainability and Environment Contact Related Links DOE FRA UChicago URA Newsroom Spotlight Press releases Fact sheets and brochures symmetry Interactions.org Photo and video archive Resources for ... Employees Researchers, postdocs and graduate students Job seekers Neighbors Industry K-12 students, teachers and

  3. OpenMP Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources OpenMP Resources What is OpenMP OpenMP is an industry standard API of C/C++ and Fortran for shared memory parallel programming. OpenMP Architecture Review Board (ARB) consists of major compiler vendors and many research institutions. Common architectures include shared memory architecture (multiple CPUs shared global memory, uniform memory access (UMA), with typical shared memory programming model of OpenMP, Pthreads), distributed memory architecture (each CPU has own memory,

  4. NETL: Natural Gas Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Natural Gas Resources Useful for heating, manufacturing, and as chemical feedstock, natural gas has the added benefit of producing fewer greenhouse gas emissions than other fossil fuels used in power production.The United States is endowed with an abundance of natural gas resources, so increasing use of natural gas power can help strengthen domestic energy security. NETL research efforts enhance technologies that reduce the cost, increase the efficiency, and reduce the environmental risk of

  5. WINDExchange: Information Resources

    WindExchange

    Information Resources A range of WINDExchange resources are available, including links to relevant publications, podcasts, and webinars about wind energy topics. Annual Reports Screenshot of the 2015 Wind Technologies Market Report 2015 Wind Technologies Market Report The report provides a comprehensive overview of 2015 trends in the U.S. wind industry and wind power market. Lawrence Berkeley National Laboratory draws from a variety of data sources and covers a broad range of topics. Screenshot

  6. Jefferson Lab Human Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    & Inclusion Home Emeritus Program Employee Concerns Program (ECP) Employee Relations Employment JLab Code of Ethics and Standards of Conduct JLab Registration / International Services Training and Performance Office Job Related Training & Education Reimbursement Procedures Workplace Harassment and Violence Policy forms HR Forms Human Resources The Human Resources team is fully integrated with Jefferson Lab's mission, committed to providing quality customer service based on expertise,

  7. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Resources Resources About one in every three federal employees is a military Veteran. At the Department of Energy, 21 percent of our workforce is made up of preference veterans. Veterans, their spouses, and dependent children are eligible for a variety of benefits provided by the Federal government. Some of these benefits are connected with service disabilities; others depend on amount of time served and in what capacity. Regardless, any Veteran seeking employment with a Federal agency should be

  8. NREL: Renewable Resource Data Center - Biomass Resource Information

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Biomass Resource Information Photo of corn stover biomass resource Corn stover The Renewable Resource Data Center (RReDC) offers a collection of data and tools to assist with biomass resource research. Learn more about RReDC's biomass resource: Data Models and tools Publications Related links Biomass Resource Assessment is available for the United States by county and includes the following feedstock categories: crop residues, forest residues, primary and secondary mill residues, urban wood

  9. Resource Recovery Opportunities at America's Water Resource Recovery

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Facilities | Department of Energy Resource Recovery Opportunities at America's Water Resource Recovery Facilities Resource Recovery Opportunities at America's Water Resource Recovery Facilities Breakout Session 3A-Conversion Technologies III: Energy from Our Waste (Will we Be Rich in Fuel or Knee Deep in Trash by 2025?) Resource Recovery Opportunities at America's Water Resource Recovery Facilities Todd Williams, Deputy Leader for Wastewater Infrastructure Practice, CH2M HILL

  10. Uranium enrichment. Printed at the request of the Committee on Energy and Natural Resources, United States Senate, May 1982

    SciTech Connect

    Not Available

    1982-01-01

    Two congressional reports outline the need for new uranium-enrichment plants and their costs. Part I, The Need for Additional Uranium Enrichment Capacity to Meet Demand, examines DOE's case for continuing construction of the Portsmouth, Ohio gas centrifuge plant on the basis of projected demand. The report concludes that DOE projections are high and that future demand can be met through preproduction and stockpiling. Part II, Necessity for GCEP (Gas Centrifuge Enrichment Plant) Under Low Nuclear Power Growth Conditions, concludes that continued construction is economically valid because of the uncertainty of demand forecasts. 79 references, 12 tables. (DCK)

  11. Idaho National Laboratory Cultural Resource Management Plan

    SciTech Connect

    Lowrey, Diana Lee

    2009-02-01

    As a federal agency, the U.S. Department of Energy has been directed by Congress, the U.S. president, and the American public to provide leadership in the preservation of prehistoric, historic, and other cultural resources on the lands it administers. This mandate to preserve cultural resources in a spirit of stewardship for the future is outlined in various federal preservation laws, regulations, and guidelines such as the National Historic Preservation Act, the Archaeological Resources Protection Act, and the National Environmental Policy Act. The purpose of this Cultural Resource Management Plan is to describe how the Department of Energy, Idaho Operations Office will meet these responsibilities at the Idaho National Laboratory. This Laboratory, which is located in southeastern Idaho, is home to a wide variety of important cultural resources representing at least 13,500 years of human occupation in the southeastern Idaho area. These resources are nonrenewable; bear valuable physical and intangible legacies; and yield important information about the past, present, and perhaps the future. There are special challenges associated with balancing the preservation of these sites with the management and ongoing operation of an active scientific laboratory. The Department of Energy, Idaho Operations Office is committed to a cultural resource management program that accepts these challenges in a manner reflecting both the spirit and intent of the legislative mandates. This document is designed for multiple uses and is intended to be flexible and responsive to future changes in law or mission. Document flexibility and responsiveness will be assured through annual reviews and as-needed updates. Document content includes summaries of Laboratory cultural resource philosophy and overall Department of Energy policy; brief contextual overviews of Laboratory missions, environment, and cultural history; and an overview of cultural resource management practices. A series of

  12. Idaho National Laboratory Cultural Resource Management Plan

    SciTech Connect

    Lowrey, Diana Lee

    2011-02-01

    As a federal agency, the U.S. Department of Energy has been directed by Congress, the U.S. president, and the American public to provide leadership in the preservation of prehistoric, historic, and other cultural resources on the lands it administers. This mandate to preserve cultural resources in a spirit of stewardship for the future is outlined in various federal preservation laws, regulations, and guidelines such as the National Historic Preservation Act, the Archaeological Resources Protection Act, and the National Environmental Policy Act. The purpose of this Cultural Resource Management Plan is to describe how the Department of Energy, Idaho Operations Office will meet these responsibilities at the Idaho National Laboratory. This Laboratory, which is located in southeastern Idaho, is home to a wide variety of important cultural resources representing at least 13,500 years of human occupation in the southeastern Idaho area. These resources are nonrenewable; bear valuable physical and intangible legacies; and yield important information about the past, present, and perhaps the future. There are special challenges associated with balancing the preservation of these sites with the management and ongoing operation of an active scientific laboratory. The Department of Energy, Idaho Operations Office is committed to a cultural resource management program that accepts these challenges in a manner reflecting both the spirit and intent of the legislative mandates. This document is designed for multiple uses and is intended to be flexible and responsive to future changes in law or mission. Document flexibility and responsiveness will be assured through annual reviews and as-needed updates. Document content includes summaries of Laboratory cultural resource philosophy and overall Department of Energy policy; brief contextual overviews of Laboratory missions, environment, and cultural history; and an overview of cultural resource management practices. A series of

  13. Idaho National Laboratory Cultural Resource Management Plan

    SciTech Connect

    Julie Braun Williams

    2013-02-01

    As a federal agency, the U.S. Department of Energy has been directed by Congress, the U.S. president, and the American public to provide leadership in the preservation of prehistoric, historic, and other cultural resources on the lands it administers. This mandate to preserve cultural resources in a spirit of stewardship for the future is outlined in various federal preservation laws, regulations, and guidelines such as the National Historic Preservation Act, the Archaeological Resources Protection Act, and the National Environmental Policy Act. The purpose of this Cultural Resource Management Plan is to describe how the Department of Energy, Idaho Operations Office will meet these responsibilities at Idaho National Laboratory in southeastern Idaho. The Idaho National Laboratory is home to a wide variety of important cultural resources representing at least 13,500 years of human occupation in the southeastern Idaho area. These resources are nonrenewable, bear valuable physical and intangible legacies, and yield important information about the past, present, and perhaps the future. There are special challenges associated with balancing the preservation of these sites with the management and ongoing operation of an active scientific laboratory. The Department of Energy, Idaho Operations Office is committed to a cultural resource management program that accepts these challenges in a manner reflecting both the spirit and intent of the legislative mandates. This document is designed for multiple uses and is intended to be flexible and responsive to future changes in law or mission. Document flexibility and responsiveness will be assured through regular reviews and as-needed updates. Document content includes summaries of Laboratory cultural resource philosophy and overall Department of Energy policy; brief contextual overviews of Laboratory missions, environment, and cultural history; and an overview of cultural resource management practices. A series of appendices

  14. Sandia Text ANaLysis Extensible librarY Server

    Energy Science and Technology Software Center

    2006-05-11

    This is a server wrapper for STANLEY (Sandia Text ANaLysis Extensible librarY). STANLEY provides capabilities for analyzing, indexing and searching through text. STANLEY Server exposes this capability through a TCP/IP interface allowing third party applications and remote clients to access it.

  15. Portable RSA encryption-decryption subprogram for protecting proprietary text

    SciTech Connect

    Hanson, R.J.

    1981-09-01

    A virtually portable (FORTRAN) version of the RSA (Rivest, Shamir, Adleman) algorithm for encryption and decryption of proprietary text has been written. This system uses three previously developed software packages. These are an extended precision integer arithmetic package, an error processing package, and machine-sensitive input/output subprograms from the Text Exchange System.

  16. NATURAL RESOURCES ASSESSMENT

    SciTech Connect

    D.F. Fenster

    2000-12-11

    The purpose of this report is to summarize the scientific work that was performed to evaluate and assess the occurrence and economic potential of natural resources within the geologic setting of the Yucca Mountain area. The extent of the regional areas of investigation for each commodity differs and those areas are described in more detail in the major subsections of this report. Natural resource assessments have focused on an area defined as the ''conceptual controlled area'' because of the requirements contained in the U.S. Nuclear Regulatory Commission Regulation, 10 CFR Part 60, to define long-term boundaries for potential radionuclide releases. New requirements (proposed 10 CFR Part 63 [Dyer 1999]) have obviated the need for defining such an area. However, for the purposes of this report, the area being discussed, in most cases, is the previously defined ''conceptual controlled area'', now renamed the ''natural resources site study area'' for this report (shown on Figure 1). Resource potential can be difficult to assess because it is dependent upon many factors, including economics (demand, supply, cost), the potential discovery of new uses for resources, or the potential discovery of synthetics to replace natural resource use. The evaluations summarized are based on present-day use and economic potential of the resources. The objective of this report is to summarize the existing reports and information for the Yucca Mountain area on: (1) Metallic mineral and mined energy resources (such as gold, silver, etc., including uranium); (2) Industrial rocks and minerals (such as sand, gravel, building stone, etc.); (3) Hydrocarbons (including oil, natural gas, tar sands, oil shales, and coal); and (4) Geothermal resources. Groundwater is present at the Yucca Mountain site at depths ranging from 500 to 750 m (about 1,600 to 2,500 ft) below the ground surface. Groundwater resources are not discussed in this report, but are planned to be included in the hydrology

  17. Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

    DOE PAGES [OSTI]

    Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.; Basti, Mufeed M.

    2016-01-01

    The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutionsmore » was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.« less

  18. Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

    SciTech Connect

    Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.; Basti, Mufeed M.

    2016-01-01

    The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutions was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.

  19. BPA Resource Program Announcement Letter

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    types available to fill any projected deficits. The Resource Program will analyze the costs, risks and environmental characteristics of resource portfolios BPA could pursue and...

  20. Protection of the Groundwater Resource

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Protection of the Groundwater Resource Protection of the Groundwater Resource Monitoring wells act as sentinels between suspected LANL contamination and the water supply. August 1,...

  1. Sage Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sage Resources Jump to: navigation, search Name: Sage Resources Place: Missoula, Montana Zip: 59803 Sector: Geothermal energy, Solar Product: A company specializing in geothermal...

  2. Educational Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Educational Resources Educational Resources Sixth graders at Old Mill Middle School North ... pumps, and geothermal energy & the environment. (http:www.eia.govkids...

  3. Paleontological Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titlePaleontologicalResources&oldid647801" Feedback Contact needs updating Image...

  4. Fire Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Fire Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleFireResources&oldid612392" Feedback Contact needs updating Image needs...

  5. Wildlife Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleWildlifeResources&oldid612286" Feedback Contact needs updating Image needs...

  6. resource | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    overview cleanweb hackathon resource webinar Today, Ian Kalin, a presidential innovation fellow, and the OpenEI team recorded an "energy resource" overview for developers of...

  7. Fisheries Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Fisheries Resources Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleFisheriesResources&oldid612306" Feedback Contact needs updating Image...

  8. Hanford Cultural Resources - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    About Us Hanford Site Wide Programs Hanford's Tribal Program Hanford Cultural Resources About Us Hanford's Tribal Program Home Hanford Cultural Resources DOE American Indian Tribal...

  9. Human Resources | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Human Resources The mission of the Human Resource Department is to support the goals of The Ames Laboratory by providing support services which promote a work environmnent ...

  10. Home Energy Score Update (text version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Update (text version) Home Energy Score Update (text version) Below is a text version of the webinar titled "Home Energy Score Update," originally presented on November 17, 2010. Watch the webinar. Joan Glickman: We'll get through as many as we can in the next half an hour. Next slide: So as many of you probably know, this all started through the Recovery Through Retrofit effort which was initiated by the Middle Class Task Force out of the Office of the Vice President. That task force

  11. Quality Management Systems for Zero Energy Ready Home Webinar (Text

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Version) | Department of Energy Quality Management Systems for Zero Energy Ready Home Webinar (Text Version) Quality Management Systems for Zero Energy Ready Home Webinar (Text Version) Below is the text version of the webinar, Quality Management Systems for Zero Energy Ready Home, presented in October 2014. Watch the presentation. GoToWebinar voice: The broadcast is now starting. All attendees are in listen-only mode. Lindsay Parker: Hi, everyone. We're really glad that you can make it here

  12. Tribal Energy Project Development Through ESCOs (Text Version) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Tribal Energy Project Development Through ESCOs (Text Version) Tribal Energy Project Development Through ESCOs (Text Version) Below is a text version of the April 1, 2010 Financing Program Support for ARRA Recipients Announcer: Roger Taylor Good afternoon, or morning to everybody, depending on which time zone you are in. My name is Roger Taylor, I'm the manager of the Tribal Energy Program at the National Renewable Energy Laboratory and we thank you for joining our webinar today on

  13. The Better Buildings Neighborhood Program for a Better Future (Text

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Version) | Department of Energy The Better Buildings Neighborhood Program for a Better Future (Text Version) The Better Buildings Neighborhood Program for a Better Future (Text Version) Below is a text version of "The Better Buildings Neighborhood Program for a Better Future" video. [FAST-PACED MUSIC] "We are creating change in our community." "We are creating jobs." "We're making our homes more energy efficient." "We're using less energy."

  14. Understanding LED Color-Tunable Products Text-alternative Version |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Understanding LED Color-Tunable Products Text-alternative Version Understanding LED Color-Tunable Products Text-alternative Version This is the text-alternative version of Understanding LED Color-Tunable Products. Color-tunable luminaires are different from normal luminaires in that instead of being one constant color they can change in color. We have three basic flavors on the market. One is called dim-to-warm, which starts out at a normal whitish color-- like a 3000k

  15. Information technology resources assessment

    SciTech Connect

    Loken, S.C.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  16. BENEFIT 2015 Funding Opportunity Announcement Webinar 2 (Text Version)

    Energy.gov [DOE]

    Below is the text version of the webinar, BENEFIT 2015 Funding Opportunity Announcement 2, presented in October 2014 by Antonio Bouza and Jim Payne of the Building Technologies Office.

  17. Text-Alternative Version: Solid-State Lighting Early Lessons...

    Energy Saver

    Solid-State Lighting Early Lessons Learned Webinar Text-Alternative Version: Solid-State Lighting Early Lessons Learned Webinar Linda Sandahl: Welcome, ladies and gentlemen. I'm ...

  18. Fuel Cell Animation (Text Version) | Department of Energy

    Energy.gov [DOE] (indexed site)

    This text version of the fuel cell animation demonstrates how a fuel cell uses hydrogen to produce electricity, with only water and heat as byproducts. Fuel cell shown with its ...

  19. 2014 Refresh Automated Frontpage Slideshow Footer Text | OSTI...

    Office of Scientific and Technical Information (OSTI)

    Revision ID Field name Date Old state New state name By Comment Operations 16,562 Tue, 2016-05-10 15:15 Draft Published Justin Roby Publishing frontpage slideshow footer text ...

  20. U.S.-Israel Energy Agreement Amendment Text_04042016 | Department...

    Energy.gov [DOE] (indexed site)

    U.S.-Israel Energy Agreement Amendment Text04042016.pdf (14.16 KB) More Documents & Publications ScannedAgreement.pdf MOEDoftheItalianRepublic.PDF InternationalAgreementsJa...

  1. Electricity Grid Basics Webinar Presentation Slides and Text...

    Energy.gov [DOE] (indexed site)

    Download presentation slides and a text version of the audio from the DOE Office of Indian Energy webinar on electricity grid basics. DOE-IE FoundationalElectricityGridBasicsP...

  2. Text-Alternative Version of Building America Webinar: Put New...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Put New Tools and Content on the Building America Solution Center Text-Alternative Version of Building America Webinar: Put New Tools and Content on the Building America Solution ...

  3. Zero Energy Ready Home Orientation Webinar (Text Version) | Department...

    Energy.gov [DOE] (indexed site)

    Here is the text version of the DOE Zero Energy Ready Home Orientation Webinar, presented in July 2016. Watch the presentation. Alex Krowka: Welcome to DOE Zero Energy Ready Home ...

  4. EV Everywhere: Text Version of Share Your EV Story Video

    Energy.gov [DOE]

    This is a text version of the Share Your EV Story video, which features interviews with drivers of electric vehicles who work at the Department of Energy and its national laboratories sharing their experiences.

  5. NREL: Transportation Research - E-Roadway Animation (Text Version)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    E-Roadway Animation (Text Version) This text version of the e-roadway animation describes how electrified roadways can reduce petroleum consumption and vehicle operating costs while extending the range of electric vehicles. Part One: E-Roadway Introduction and Benefits Reducing emissions and oil consumption are crucial worldwide goals. Many technologies can contribute to achieving these goals-efficient homes, biofuels, hybrid electric vehicles, hydrogen fuel cells, electric vehicles, and solar

  6. Dr. Dan Arvizu Keynote Presentation Text Version | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Dr. Dan Arvizu Keynote Presentation Text Version This page contains the text version of the NREL Industry Growth Forum video. Clean energy is indeed ready for launch. [clapping and music] We are here at the NREL Industry Growth Forum. It brings together stakeholders, investors, cleantech start-ups, all looking to network, get to know one another, find avenues for generating revenue, find avenues for generating new investments. A lot of deals get made, a lot of new networks, new partnerships get

  7. Connected Outdoor Lighting Systems for Municipalities - Text-Alt Version |

    Energy Saver

    Department of Energy Outdoor Lighting Systems for Municipalities - Text-Alt Version Connected Outdoor Lighting Systems for Municipalities - Text-Alt Version Welcome, everyone. This is Bruce Kinzey with the Pacific Northwest National Laboratory and director of the U.S. Department of Energy's Municipal Solid-State Street Lighting Consortium. Welcome to today's webinar, Connected Outdoor Lighting Systems for Municipalities, brought you by the DOE Better Buildings Challenge. This webinar was

  8. What Is Energy Systems Integration? (Text Version) | Energy Systems

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Integration | NREL What Is Energy Systems Integration? (Text Version) This is a text version of the video "What Is Energy Systems Integration?" Ben Kroposki: Energy systems integration is taking a holistic look at energy systems and how they connect together. Blake Lundstrom: It's a commitment to looking at the big picture of our energy system. Bryan Hannegan: There's so much development going on with renewable supplies of electricity, with emerging consumer devices, the so-called

  9. Text-Alternative Version: DOE Five Year Commercialization Support Plan |

    Energy Saver

    Department of Energy DOE Five Year Commercialization Support Plan Text-Alternative Version: DOE Five Year Commercialization Support Plan Below is the text-alternative version of the DOE Five Year Commercialization Support Plan webcast. Speaker: I'm going to give you an overview of the Department of Energy's five year solid-state lighting commercialization support plan. This plan addresses a range of activities that the Department of Energy has planned for helping to commercialize solid-state

  10. Text-Alternative Version: Dimming LEDs Webcast | Department of Energy

    Energy Saver

    Dimming LEDs Webcast Text-Alternative Version: Dimming LEDs Webcast Below is the text-alternative version of the "Dimming LEDs" webcast, held December 10, 2012. Kelly Gordon: We're very happy to have as our speaker today Michael Poplawski, also of Pacific Northwest National Laboratory. Michael joined PNNL in 2009 as a senior engineer following 12 years in the commercial semiconductor industry. His work experience includes stints with domestic and foreign component manufacturers ranging

  11. Text-Alternative Version: Evaluating LED Street Lighting Solutions |

    Energy Saver

    Department of Energy Evaluating LED Street Lighting Solutions Text-Alternative Version: Evaluating LED Street Lighting Solutions Below is the text-alternative version of the Evaluating LED Street Lighting Solutions webcast, held July 20, 2010. Edward Smalley: Good morning, everyone. Welcome to the Market Introduction Workshop, and the pre-conference webcast, Evaluating LED Street Lighting Solutions. This morning we have three panelists with us. Todd Rosenbaum from the city of Portland, with

  12. Text-Alternative Version: LED Essentials - Technology, Applications,

    Energy Saver

    Advantages, Disadvantages | Department of Energy Essentials - Technology, Applications, Advantages, Disadvantages Text-Alternative Version: LED Essentials - Technology, Applications, Advantages, Disadvantages Below is the text-alternative version of the LED Essentials - Technology, Applications, Advantages, Disadvantages webcast. Speaker: Hi, this is Kevin Dowling. I'm with Philips Solid-State Lighting in Burlington, Massachusetts. I'm the head of innovation, but my industrial roles include

  13. Text-Alternative Version: LED Replacement Lamps: Current Performance and

    Energy Saver

    the Latest on ENERGY STAR® | Department of Energy Replacement Lamps: Current Performance and the Latest on ENERGY STAR® Text-Alternative Version: LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® Below is the text-alternative version of the LED Replacement Lamps: Current Performance and the Latest on ENERGY STAR® webcast. Terry Shoemaker: Welcome, ladies and gentlemen. I'm Terry Shoemaker with the Pacific Northwest National Laboratory, and I'd like to welcome you

  14. Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps |

    Energy Saver

    Department of Energy Replacements for Linear Fluorescent Lamps Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps Below is the text-alternative version of the "LED Replacements for Linear Fluorescent Lamps" webcast, held June 20, 2011. Theresa Shoemaker: Welcome, ladies and gentlemen. I'm Terry Shoemaker with the Pacific Northwest National Laboratory, and I'd like to welcome you to today's webcast, "LED Replacements for Linear Fluorescent Lamps,"

  15. Text-Alternative Version: Model Specification for LED Roadway Luminaires

    Energy Saver

    Webcast | Department of Energy Model Specification for LED Roadway Luminaires Webcast Text-Alternative Version: Model Specification for LED Roadway Luminaires Webcast Below is the text-alternative version of the "Model Specification for LED Roadway Luminaires" webcast, held November 15, 2011. Theresa Shoemaker: Welcome, ladies and gentleman. I'm Terry Shoemaker with the Pacific Northwest National Laboratory, and I'd like to welcome you to today's webcast: Model Specification for

  16. Text-Alternative Version: Pedestrian-Friendly Nighttime Lighting Webinar |

    Energy Saver

    Department of Energy Pedestrian-Friendly Nighttime Lighting Webinar Text-Alternative Version: Pedestrian-Friendly Nighttime Lighting Webinar Below is the text-alternative version of the "Pedestrian-Friendly Nighttime Lighting" webcast, held November 19, 2013. Linda Sandahl: Welcome, ladies and gentlemen. I'm Linda Sandahl with Pacific Northwest National Laboratory and I'd like to welcome you to today's webinar, "Pedestrian-Friendly Nighttime Lighting," brought to you by

  17. Text-Alternative Version: Successful Selection of LED Streetlight

    Energy Saver

    Luminaires Webcast | Department of Energy Successful Selection of LED Streetlight Luminaires Webcast Text-Alternative Version: Successful Selection of LED Streetlight Luminaires Webcast Below is the text-alternative version of the "Successful Selection of LED Streetlight Luminaires" webcast, held March 6, 2013. Edward Smalley: Hello and welcome ladies and gentlemen. I'm Edward Smalley with Seattle City Light, Seattle's publically owned utility. As director of the Municipal

  18. Text-Alternative Version: Understanding and Evaluating LM-79 Reports |

    Energy Saver

    Department of Energy LM-79 Reports Text-Alternative Version: Understanding and Evaluating LM-79 Reports Below is the text-alternative version of Day 1 of the three-part TINSSL Webinar Series "Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology," held August 10, 2010. Sarah Eckstein: Today's webinar will focus on understanding and evaluating LM-79 reports. Tomorrow's webinar will focus on understanding and evaluating in situ temperature and measurement points

  19. Hydrogen-Fueled Vehicle Safety Systems Animation (Text Version) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Hydrogen-Fueled Vehicle Safety Systems Animation (Text Version) Hydrogen-Fueled Vehicle Safety Systems Animation (Text Version) Hydrogen fueled vehicles have multiple safety systems that detect and prevent the accidental release of hydrogen. There are sensors that detect leaks, a computer that monitors fuel flow, and an excess flow shut-off valve. Hydrogen tanks also have a pressure release device, much like those on natural gas water heaters in our homes. If a leak is

  20. A METHODOLOGY FOR INTEGRATING IMAGES AND TEXT FOR OBJECT IDENTIFICATION

    SciTech Connect

    Paulson, Patrick R.; Hohimer, Ryan E.; Doucette, Peter J.; Harvey, William J.; Seedahmed, Gamal H.; Petrie, Gregg M.; Martucci, Louis M.

    2006-02-13

    Often text and imagery contain information that must be combined to solve a problem. One approach begins with transforming the raw text and imagery into a common structure that contains the critical information in a usable form. This paper presents an application in which the imagery of vehicles and the text from police reports were combined to demonstrate the power of data fusion to correctly identify the target vehicle--e.g., a red 2002 Ford truck identified in a police report--from a collection of diverse vehicle images. The imagery was abstracted into a common signature by first capturing the conceptual models of the imagery experts in software. Our system then (1) extracted fundamental features (e.g., wheel base, color), (2) made inferences about the information (e.g., it’s a red Ford) and then (3) translated the raw information into an abstract knowledge signature that was designed to both capture the important features and account for uncertainty. Likewise, the conceptual models of text analysis experts were instantiated into software that was used to generate an abstract knowledge signature that could be readily compared to the imagery knowledge signature. While this experiment primary focus was to demonstrate the power of text and imagery fusion for a specific example it also suggested several ways that text and geo-registered imagery could be combined to help solve other types of problems.

  1. Storage resource manager

    SciTech Connect

    Perelmutov, T.; Bakken, J.; Petravick, D.; /Fermilab

    2004-12-01

    Storage Resource Managers (SRMs) are middleware components whose function is to provide dynamic space allocation and file management on shared storage components on the Grid[1,2]. SRMs support protocol negotiation and reliable replication mechanism. The SRM standard supports independent SRM implementations, allowing for a uniform access to heterogeneous storage elements. SRMs allow site-specific policies at each location. Resource Reservations made through SRMs have limited lifetimes and allow for automatic collection of unused resources thus preventing clogging of storage systems with ''orphan'' files. At Fermilab, data handling systems use the SRM management interface to the dCache Distributed Disk Cache [5,6] and the Enstore Tape Storage System [15] as key components to satisfy current and future user requests [4]. The SAM project offers the SRM interface for its internal caches as well.

  2. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    DOE PAGES [OSTI]

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfectmore » light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.« less

  3. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    SciTech Connect

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfect light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.

  4. Coal resources of Kyrgyzstan

    SciTech Connect

    Landis, E.R.; Bostick, N.H.; Gluskoter, H.J.; Johnson, E.A.; Harrison, C.D.; Huber, D.W.

    1995-12-31

    The rugged, mountainous country of Kyrgyzstan contains about one-half of the known coal resources of central Asia (a geographic and economic region that also includes Uzbekistan, Tadjikistan and Turkmenistan). Coal of Jurassic age is present in eight regions in Kyrgyzstan in at least 64 different named localities. Significant coal occurrences of about the same age are present in the central Asian countries of Kazakhstan, China, and Russia. Separation of the coal-bearing rocks into individual deposits results more than earth movements before and during formation of the present-day mountains and basins of the country than from deposition in separate basins.Separation was further abetted by deep erosion and removal of the coal-bearing rocks from many areas, followed by covering of the remaining coal-bearing rocks by sands and gravels of Cenozoic age. The total resources of coal in Kyrgyzstan have been reported as about 30 billion tons. In some of the reported localities, the coal resources are known and adequately explored. In other parts of the republic, the coal resources are inadequately understood or largely unexplored. The resource and reserve inventory of Kyrgyzstan is at best incomplete; for some purposes, such as short-term local and long-range national planning, it may be inadequate. Less than 8% of the total estimated resources are categorized as recoverable reserves, and the amount that is economically recoverable is unknown. The coal is largely of subbituminous and high-volatile C bituminous rank, most has low and medium ash and sulfur contents, and coals of higher rank (some with coking qualities) are present in one region. It is recommended that appropriate analyses and tests be made during planning for utilization.

  5. CONNECTED LIGHTING SYSTEMS RESOURCES | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CONNECTED LIGHTING SYSTEMS RESOURCES CONNECTED LIGHTING SYSTEMS RESOURCES The following resources provide information about outdoor lighting control systems. 2014 Presentation:...

  6. Employee, Retiree Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Resources Employee, Retiree Resources Employees and retirees are the building blocks of the Lab's success. Our employees get to contribute to the most pressing issues facing the nation. Clearances» New Hire» Payroll, Taxes» Benefits Plan Reports & Notices» Retiree Benefits» Travel Reimbursement» Verification of Employment» 2017 Open Enrollment for Retirees» TOP STORIES - highlights of our science, people, technologies close Jim Stein-Photo finish In the "photographer's

  7. New Hire Interview Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Interview Resources New Hire Interview Resources Information and tips for ensuring a smooth interview process Contact (505) 667-4451, Option 5 Email Prepare for your interview Confirm your interview with a hiring manager or HR generalist. Obtain the name(s) of persons on the interviewing team in advance, if possible. Ensure the interview team has electronic or hard copies of your resumé and supporting material. If you will be onsite for the interview Know where you need to go for the interview.

  8. OpenMP Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    OpenMP Home » For Users » Computational Systems » Edison » Programming » Using OpenMP » OpenMP Resources OpenMP Resources What is OpenMP OpenMP is an industry standard API of C/C++ and Fortran for shared memory parallel programming. OpenMP Architecture Review Board (ARB) consists of major compiler vendors and many research institutions. Common architectures include shared memory architecture (multiple CPUs shared global memory, uniform memory access (UMA), with typical shared memory

  9. NREL: Renewable Resource Data Center - Webmaster

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Printable Version RReDC Home Biomass Resource Information Geothermal Resource Information Solar Resource Information Wind Resource Information Did you find what you needed? Yes 1...

  10. World Shale Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Deputy Administrator The U.S. has experienced a rapid increase in natural gas and oil production from shale and other tight resources 2 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0...

  11. Information Gain Based Dimensionality Selection for Classifying Text Documents

    SciTech Connect

    Dumidu Wijayasekara; Milos Manic; Miles McQueen

    2013-06-01

    Selecting the optimal dimensions for various knowledge extraction applications is an essential component of data mining. Dimensionality selection techniques are utilized in classification applications to increase the classification accuracy and reduce the computational complexity. In text classification, where the dimensionality of the dataset is extremely high, dimensionality selection is even more important. This paper presents a novel, genetic algorithm based methodology, for dimensionality selection in text mining applications that utilizes information gain. The presented methodology uses information gain of each dimension to change the mutation probability of chromosomes dynamically. Since the information gain is calculated a priori, the computational complexity is not affected. The presented method was tested on a specific text classification problem and compared with conventional genetic algorithm based dimensionality selection. The results show an improvement of 3% in the true positives and 1.6% in the true negatives over conventional dimensionality selection methods.

  12. Flow-enhanced solution printing of all-polymer solar cells

    SciTech Connect

    Diao, Ying; Zhou, Yan; Kurosawa, Tadanori; Shaw, Leo; Wang, Cheng; Park, Steve; Guo, Yikun; Reinspach, Julia A.; Gu, Kevin; Gu, Xiaodan; Tee, Benjamin C. K.; Pang, Changhyun; Yan, Hongping; Zhao, Dahui; Toney, Michael F.; Mannsfeld, Stefan C. B.; Bao, Zhenan

    2015-08-12

    Morphology control of solution coated solar cell materials presents a key challenge limiting their device performance and commercial viability. Here we present a new concept for controlling phase separation during solution printing using an all-polymer bulk heterojunction solar cell as a model system. The key aspect of our method lies in the design of fluid flow using a microstructured printing blade, on the basis of the hypothesis of flow-induced polymer crystallization. Our flow design resulted in a similar to 90% increase in the donor thin film crystallinity and reduced microphase separated donor and acceptor domain sizes. The improved morphology enhanced all metrics of solar cell device performance across various printing conditions, specifically leading to higher short-circuit current, fill factor, open circuit voltage and significantly reduced device-to-device variation. However, we expect our design concept to have broad applications beyond all-polymer solar cells because of its simplicity and versatility.

  13. City of Atlanta Video (Text Version) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    City of Atlanta Video (Text Version) City of Atlanta Video (Text Version) Aaron Bastian: According to the U.S. EPA, Atlanta is one of the top ten cities in the country for green buildings. It is a city that is walk and bike friendly, and now Atlanta is second in the country for the sale of electric vehicles. Atlanta has seen tremendous adoption of plug-in electric vehicles amongst her residents, but to truly meet driver demand, chargers must be both accessible and available at major destinations

  14. Using adversary text to detect adversary phase changes.

    SciTech Connect

    Speed, Ann Elizabeth; Doser, Adele Beatrice; Warrender, Christina E.

    2009-05-01

    The purpose of this work was to help develop a research roadmap and small proof ofconcept for addressing key problems and gaps from the perspective of using text analysis methods as a primary tool for detecting when a group is undergoing a phase change. Self- rganizing map (SOM) techniques were used to analyze text data obtained from the tworld-wide web. Statistical studies indicate that it may be possible to predict phase changes, as well as detect whether or not an example of writing can be attributed to a group of interest.

  15. NREL Employee's Perspective Video - Text Version | Careers | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL Employee's Perspective Video - Text Version Below is the text version for the NREL Employee's Perspective Video. Hi, my name is Nicholas Long, I'm a researcher here at the National Renewable Energy Lab. I work in the commercial buildings group in the analysis, tools and control section, and I work on making buildings more energy efficient. What keeps me here at NREL are the people. They're wicked smart, they're passionate about the mission, as well, they are caring, they're loving, and to

  16. Sustainability in Bioenergy: A Nation Connected Text Version | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Sustainability in Bioenergy: A Nation Connected Text Version Sustainability in Bioenergy: A Nation Connected Text Version 0:02-0:07 Narrator: Sustainability - never has a word had so many meanings, to so many different people. 0:08-0:13 Narrator: Bioenergy - never has a word connected so many people, across an entire nation. 0:15-0:23 Narrator: It's not just what these two words together can produce, but what these two words combined, can help us to save. Let us show you how.

  17. Center for Inverse Design: EFRC Researchers in Focus (Text Version)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    EFRC Researchers in Focus Tom Mason (Text Version) This is the text version for the EFRC Researchers in Focus: Tom Mason video. One of the reasons as an experimentalist that I'm so excited about being involved with the Center for Inverse Design-as are the students and postdocs-is the opportunity to reverse the paradigm. In conventional materials science, we stumble on to new materials, and then we have the theorists tell us what the band structure is, and we've already developed the properties.

  18. Text-Alternative Version: LEDs for Interior Office Applications |

    Energy Saver

    Department of Energy LEDs for Interior Office Applications Text-Alternative Version: LEDs for Interior Office Applications Below is the text-alternative version of the LEDs for Interior Office Applications webcast, held March 18, 2010. Terry Shoemaker: Welcome, ladies and gentlemen. I'm Terry Shoemaker with the Pacific Northwest National Laboratory, and I'd like to welcome to you to today's webcast, "LEDs for Interior Office Applications." This is brought to you by the U.S.

  19. Inclusion in the Workplace - Text Version | Careers | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Inclusion in the Workplace - Text Version This is the text version for the Inclusion in the Workplace video. Manajit Sengupta: I work at NREL because of primarily the challenges, the excitement of the work, and the people I work with. Suzy Belmont: When people feel safe and they feel accepted, they're able to bring the best parts of themselves forward, and they're able to bring exciting new ideas forward because they feel like they can fail, they feel like they can try out new things. Bobi

  20. Inclusion: Leading by Example - Text Version | Careers | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Inclusion: Leading by Example - Text Version This is the text version for the Inclusion: Leading by Example video. I'm Martin Keller. I'm the NREL Director. To create a more inclusive workplace, you need to start on the top. In the leadership team, you lead by example. Because you know, it's interesting, in an all my professional careers I have seen this. And when I was starting as a young student, of course, you're looking and you're watching your leadership team very closely to see how do they

  1. Valuation of ecological resources

    SciTech Connect

    Scott, M.J.; Bilyard, G.R.; Link, S.O.; Ricci, P.F.; Seely, H.E.; Ulibarri, C.A.; Westerdahl, H.E.

    1995-04-01

    Ecological resources are resources that have functional value to ecosystems. Frequently, these functions are overlooked in terms of the value they provide to humans. Environmental economics is in search of an appropriate analysis framework for such resources. In such a framework, it is essential to distinguish between two related subsets of information: (1) ecological processes that have intrinsic value to natural ecosystems; and (2) ecological functions that are values by humans. The present study addresses these concerns by identifying a habitat that is being displaced by development, and by measuring the human and ecological values associated with the ecological resources in that habitat. It is also essential to determine which functions are mutually exclusive and which are, in effect, complementary or products of joint production. The authors apply several resource valuation tools, including contingent valuation methodology (CVM), travel cost methodology (TCM), and hedonic damage-pricing (HDP). One way to derive upper-limit values for more difficult-to-value functions is through the use of human analogs, because human-engineered systems are relatively inefficient at supplying the desired services when compared with natural systems. Where data on the relative efficiencies of natural systems and human analogs exist, it is possible to adjust the costs of providing the human analog by the relative efficiency of the natural system to obtain a more realistic value of the function under consideration. The authors demonstrate this approach in an environmental economic case study of the environmental services rendered by shrub-steppe habitats of Benton County, Washington State.

  2. Geothermal resources of Montana

    SciTech Connect

    Metesh, J.

    1994-06-01

    The Montana Bureau of Mines and Geology has updated its inventory of low and moderate temperature resources for the state and has assisted the Oregon Institute of Technology - GeoHeat Center and the University of Utah Research Institute in prioritizing and collocating important geothermal resource areas. The database compiled for this assessment contains information on location, flow, water chemistry, and estimated reservoir temperatures for 267 geothermal well and springs in Montana. For this assessment, the minimum temperature for low-temperature resource is defined as 10{degree} C above the mean annual air temperature at the surface. The maximum temperature for a moderate-temperature resource is defined as greater than 50{degree} C. Approximately 12% of the wells and springs in the database have temperatures above 50{degree} C, 17% are between 30{degree} and 50{degree} C, 29% are between 20{degree} and 30{degree}C, and 42% are between 10{degree} and 20{degree} C. Low and moderate temperature wells and springs can be found in nearly all areas of Montana, but most are in the western third of the state. Information sources for the current database include the MBMG Ground Water Information Center, the USGS statewide database, the USGS GEOTHERM database, and new information collected as part of this program. Five areas of Montana were identified for consideration in future investigations of geothermal development. The areas identified are those near Bozeman, Ennis, Butte, Boulder, and Camas Prairie. These areas were chosen based on the potential of the resource and its proximity to population centers.

  3. Developer Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Developer Resources Developer Resources Apps for Energy Apps for Energy The Energy Department is challenging developers to use the Green Button data access program to bring residential and commercial utility data to life with fun and creative apps. Read more Learn about Green Button Learn about Green Button Apps for Energy submissions must use Green Button data. To learn more, start here. Read more NREL Resources NREL Resources NREL offers a number resources for Green Button app developers. Find

  4. E-print Network Alerts Help -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Alert Email Format: You can choose either HTML or TEXT email format. Alert Frequency: Choose how often to receive your Alert results. Enter your search terms into any or all of the ...

  5. POLICY GUIDANCE MEMORANDUM #06 Reducing Text Messaging While Driving

    Energy.gov [DOE]

    This Order directed all agencies of the executive branch to take appropriate action within the scope of their existing programs to further the policies of this order and to implement rules for text messaging while operating Government-owned vehicles, or using electronic equipment supplied by the Government while driving.

  6. Text-Alternative Version of Building America Webinar: Multifamily

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ventilation Strategies and Compartmentalization Requirements | Department of Energy Multifamily Ventilation Strategies and Compartmentalization Requirements Text-Alternative Version of Building America Webinar: Multifamily Ventilation Strategies and Compartmentalization Requirements Multifamily Ventilation Strategies and Compartmentalization Requirements September 24, 2014 Sean Maxwell, Senior Energy Consultant, Steven Winter Associates Joe Lstiburek, Founding Principal of Building Science

  7. CEUSP Inventory_11-6-13_Final_print-ready

    Office of Environmental Management (EM)

    2, Approve Performance Baseline CD-2, Approve Performance Baseline CD-2, Approve Performance Baseline << Resource Center | CD-3 >> Description Completion of preliminary design is the first major milestone in the project Execution Phase. The design must be sufficiently mature (refer to DOE O 413.3B, Appendix C, Paragraph 4) at the time of CD-2 approval to provide reasonable assurance that the design will be implementable within the approved PB. The document signed by the CE or PME

  8. Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

    DOEpatents

    Rogers, John A; Nuzzo, Ralph; Kim, Hoon-sik; Brueckner, Eric; Park, Sang Il; Kim, Rak Hwan

    2014-10-21

    Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

  9. Using 3D Printing to Redesign Santa's Sleigh | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Using 3D Printing to Redesign Santa's Sleigh Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Using 3D Printing to Redesign Santa's Sleigh Thomas The Elf 2013.12.03 Hello Everyone! I am so excited to be back this year to share another way GE researchers are taking part in the holiday cheer. In the past, we've utilized GE

  10. Connect to researchers around the world at OSTI's E-Print Network | OSTI,

    Office of Scientific and Technical Information (OSTI)

    US Dept of Energy Office of Scientific and Technical Information Connect to researchers around the world at OSTI's E-Print Network Back to the OSTI News Listing for 2008 You can browse more than 28,500 Web sites of researchers from around the world, read their abstracts, download their papers, and explore their research institutions, all at OSTI's E-print Network. This rapidly growing service is free and open to the public. Simply go to the browse by disciplines page, and select from an

  11. Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate

    DOE PAGES [OSTI]

    Zhou, Wenchao; List, III, Frederick Alyious; Duty, Chad E; Babu, Sudarsanam Suresh

    2015-01-24

    This paper focuses on sintering kinetics of inkjet printed lines containing silver nanoparticles deposited on a plastic substrate. Upon heat treatment, the change of resistance in the printed lines was measured as a function of time and sintering temperatures from 150 to 200 C. A critical temperature was observed for the sintering process, beyond which there was no further reduction in resistance. Analysis shows the critical temperature correlates to the boiling point of the solvent, which is attributed to a liquid-mediated sintering mechanism. It is demonstrated that the sintering process shuts down after the solvent has completely evaporated.

  12. Labs in NNSA lead the way in 3D printing - the next industrial revolution

    National Nuclear Security Administration (NNSA)

    | National Nuclear Security Administration | (NNSA) Labs in NNSA lead the way in 3D printing - the next industrial revolution Monday, June 13, 2016 - 10:29am The power to create useful items from raw materials recently entered regular homes via small-scale 3D-printers, but the concept of additive manufacturing isn't so new. From defense, aerospace, automotive, medicine, and metals manufacturing, the capabilities enabled by 3D printing have wide-reaching effects. Additive manufacturing builds

  13. Oceans: our last resource

    SciTech Connect

    Marx, W.

    1981-01-01

    It is widely believed that oceans are vast storehouses of untapped food, energy, minerals, and even living space, but the author warns of a critical turning point in our stewardship of marine resources. The book opens with a history of thoughtless abuse and past mistakes which have eroded and polluted shorelines. Blind hopes for recovery of mineral wealth involve technology that may be prohibitively expensive or logistically impossible, and may have obscured real opportunities, notably the careful management and cultivation of valuable marine resources such as kelp, fish, and shellfish species. The author explores a broad spectrum of alternatives for safeguarding the oceans themselves by following wiser practices on land: methods of using biomass energy to lessen our dependence on offshore mineral development, and possibilities for recycling sewage rather than perceiving the ocean as the ultimate garbage dump. Two appendices present selected information on world fisheries and aquaculture and on the hazards of offshore oil. 319 references.

  14. Taxation of mineral resources

    SciTech Connect

    Conrad, R.F.; Hool, R.B.

    1980-01-01

    There has been a substantial increase in recent years in the level of taxation imposed on mining firms by state and local governments. This increase can be attributed to three factors: (1) a heightened awareness that resources are limited in quantity; (2) environmental damage resulting from mining operations has brought demands for just compensations; and (3) significant price increases for some minerals have often been viewed by states as an opportunity to collect additional tax revenue. The broad aim of this book is to provide a comprehensive economic analysis of the effects of mining taxation on the extraction of mineral resources and to offer a set of recommendations for tax policy. The primary objective of this design is to minimize the distortionary incentives created by the taxation. From a practical standpoint, however, one must also recognize the degrees of difficulty in the administration of the various taxes. 90 references, 1 figure, 14 tables.

  15. Inferring Group Processes from Computer-Mediated Affective Text Analysis

    SciTech Connect

    Schryver, Jack C; Begoli, Edmon; Jose, Ajith; Griffin, Christopher

    2011-02-01

    Political communications in the form of unstructured text convey rich connotative meaning that can reveal underlying group social processes. Previous research has focused on sentiment analysis at the document level, but we extend this analysis to sub-document levels through a detailed analysis of affective relationships between entities extracted from a document. Instead of pure sentiment analysis, which is just positive or negative, we explore nuances of affective meaning in 22 affect categories. Our affect propagation algorithm automatically calculates and displays extracted affective relationships among entities in graphical form in our prototype (TEAMSTER), starting with seed lists of affect terms. Several useful metrics are defined to infer underlying group processes by aggregating affective relationships discovered in a text. Our approach has been validated with annotated documents from the MPQA corpus, achieving a performance gain of 74% over comparable random guessers.

  16. Domain-independent information extraction in unstructured text

    SciTech Connect

    Irwin, N.H.

    1996-09-01

    Extracting information from unstructured text has become an important research area in recent years due to the large amount of text now electronically available. This status report describes the findings and work done during the second year of a two-year Laboratory Directed Research and Development Project. Building on the first-year`s work of identifying important entities, this report details techniques used to group words into semantic categories and to output templates containing selective document content. Using word profiles and category clustering derived during a training run, the time-consuming knowledge-building task can be avoided. Though the output still lacks in completeness when compared to systems with domain-specific knowledge bases, the results do look promising. The two approaches are compatible and could complement each other within the same system. Domain-independent approaches retain appeal as a system that adapts and learns will soon outpace a system with any amount of a priori knowledge.

  17. Pathway and Resource Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pathway and Resource Overview Delivering Renewable Hydrogen Workshop - A Focus on Near-Term Applications Mark F. Ruth November 16, 2009 Palm Springs, CA NREL/PR-6A1-47108 National Renewable Energy Laboratory Innovation for Our Energy Future Definition and Presentation Outline Hydrogen pathway analysis is analysis of the total levelized cost (including return on investment), well-to- wheels (WTW) energy use, and WTW emissions for hydrogen production, delivery, and distribution pathways. This

  18. LANSCE | Lujan Center | Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    User Resources The links below describe equipment, laboratories, capabilities, and sample environments that are available to users. Users must plan ahead and specify their needs when they submit beamtime proposals so that proper coordination can be planned. For more information about a specific area you would like to use, please contact the appropriate listed lead person: Chemical and Sample Preparation Sample and Equipment Shipping Instructions Ancillary Equipment and Sample Environment

  19. Lignocellulosic feedstock resource assessment

    SciTech Connect

    Rooney, T.

    1998-09-01

    This report provides overall state and national information on the quantity, availability, and costs of current and potential feedstocks for ethanol production in the United States. It characterizes end uses and physical characteristics of feedstocks, and presents relevant information that affects the economic and technical feasibility of ethanol production from these feedstocks. The data can help researchers focus ethanol conversion research efforts on feedstocks that are compatible with the resource base.

  20. ALCF COMPUTING RESOURCES MIRA

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    COMPUTING RESOURCES MIRA Mira, the ALCF's 10-petaflops IBM Blue Gene/Q supercomputer, opens the door for scientists to analyze data more efficiently, design products more quickly, and address some of society's biggest problems in ways that would otherwise be impossible. The system is capable of carrying out 10 quadrillion calculations per second. Mira is also among the most energy-efficient supercomputers, saving considerable energy through innovative chip designs and a unique water-cooling

  1. Response Resources Demonstration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Interoperability of Demand Response Resources Demonstration in NY Final Technical Report Award Number: DE-FC26-08NT02869 Project Type: Regional Demonstration Principal Investigator: Andre Wellington, Project Manager, Smart Grid Implementation Group Recipient: Consolidated Edison Company of New York, Inc. Team members: Innoventive Power and Verizon Communications Consolidated Edison Company of New York, Inc. Taxpayer ID Number: 13-5009340 Organizational DUNS: 00-698-2359 4 Irving Place New York,

  2. The Resource Hierarchy Relationship

    Energy Information Administration (EIA) (indexed site)

    Resource Hierarchy Relationship Troy Cook September 27, 2015 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. WORKING PAPER SERIES September 2015 Troy Cook | U.S. Energy Information Administration This paper is released to

  3. Text Transcript of the Tribal Energy and Economic Development February

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Webinar: Exploring Your Energy Markets | Department of Energy Development February Webinar: Exploring Your Energy Markets Text Transcript of the Tribal Energy and Economic Development February Webinar: Exploring Your Energy Markets Randy Manion: Good morning or good afternoon wherever you may be and welcome to the second webinar of the 2016 DOE Tribal Renewable Energy Webinar Series: Exploring Your Energy Markets. I'm Randy Manion, today's webinar chair and manager of Western Area Power

  4. Text Transcript of the Tribal Energy and Economic Development March

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Webinar: Transmission and Grid Basics for Tribal Economic and Energy Development | Department of Energy Development March Webinar: Transmission and Grid Basics for Tribal Economic and Energy Development Text Transcript of the Tribal Energy and Economic Development March Webinar: Transmission and Grid Basics for Tribal Economic and Energy Development Sean Esterly: Good morning, or good afternoon, wherever you may be joining us from, and welcome to the third webinar of the 2016 Department of

  5. Text-Alternative Version of Building America Webinar: Central Multifamily

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Water Heating Systems | Department of Energy Central Multifamily Water Heating Systems Text-Alternative Version of Building America Webinar: Central Multifamily Water Heating Systems Central Multifamily Water Heating Systems January 21, 2015 Elizabeth Weitzel, Alliance for Residential Building Innovation (ARBI) Jordan Dentz, Advanced Residential Integrated Energy Solutions (ARIES) Eric Ansanelli, Advanced Residential Integrated Energy Solutions (ARIES) Gail: Hello everyone, I'm Gail Werren

  6. Text-Alternative Version of Building America Webinar: Solutions for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Combustion Safety in Existing Homes | Department of Energy Solutions for Combustion Safety in Existing Homes Text-Alternative Version of Building America Webinar: Solutions for Combustion Safety in Existing Homes Solutions for Combustion Safety in Existing Homes 12/16/15 Speakers Larry Brand, Research and Development Manager at the Gas Technology Institute and the Partnership for Advanced Residential Retrofit (PARR) David Bohac, Director of Research with the Center for Energy and Environment

  7. Text-Alternative Version of Building America Webinar: Ventilation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines | Department of Energy Ventilation Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines Text-Alternative Version of Building America Webinar: Ventilation Strategies for High Performance Homes, Part I: Application-Specific Ventilation Guidelines August 26, 2015 Building America - Ventilation Strategies for High Performance Homes, Part I: Application-Specific

  8. Text-Alternative Version of High Performance Space Conditioning Systems:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Part I | Department of Energy I Text-Alternative Version of High Performance Space Conditioning Systems: Part I High Performance Space Conditioning Systems: Part I October 21, 2014 Andrew Poerschke, Research Initiatives Specialist, IBACOS Kohta Ueno, Senior Associate, Building Science Corporation Gail: Hello everyone. I am Gail Werren with the National Renewable Energy Laboratory. And I'd like to welcome you to today's webinar hosted by the Building America Program. We are excited to have

  9. Text-Alternative Version of High Performance Space Conditioning Systems:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Part II | Department of Energy II Text-Alternative Version of High Performance Space Conditioning Systems: Part II High Performance Space Conditioning Systems: Part II November 18, 2014 William Zoeller, Stephen Winter Associates Dave Mallay, Home Innovation Research Labs Jordan Dentz, The Levy Partnership Francis Conlin, High Performance Building Solutions Hello everyone! I am Gail Werren with the National Renewable Energy Laboratory, and I'd like to welcome you to today's webinar hosted by

  10. Information technology resources assessment

    SciTech Connect

    Stevens, D.F.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  11. Information technology resources assessment

    SciTech Connect

    Stevens, D.F.

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  12. Using wastes as resources

    SciTech Connect

    Prakasam, T.B.S.; Lue-Hing, C. )

    1992-09-01

    The collection, treatment, and disposal of domestic and industrial wastewater, garbage, and other wastes present considerable problems in urban and semiurban areas of developing countries. Major benefits of using integrated treatment and resource recovery systems include waste stabilization, recovering energy as biogas, producing food from algae and fish, irrigation, improved public health, and aquatic weed control and use. Information and research are needed, however, to assesss the appropriateness, benefits, and limitations of such technology on a large scale. System configuration depends on the types and quantities of wastes available for processing. There must be enough collectable waste for the system to be viable. Information should be gathered to asses whether there is a net public health benefit by implementing a waste treatment and resource recovery system. Benefits such as savings in medical expenses and increased worker productivity due to improved health may be difficult to quantify. The potential health risks created by implementing a resource recovery system should be studied. The most difficult issues to contend with are socioeconomic in nature. Often, the poor performance of a proven technology is attributed to a lack of proper understanding of its principles by the operators, lack of community interest, improper operator training, and poor management. Public education to motivate people to accept technologies that are beneficial to them is important.

  13. NREL: Renewable Resource Data Center - Solar Resource Information

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Solar Resource Information The Renewable Resource Data Center (RReDC) offers a collection of data and tools to assist with solar resource research. Learn more about RReDC's solar resource: Data Models and tools Publications Related links The proper siting of any renewable energy system is critical to its success. However, siting a solar energy system can be particularly challenging because of the varying nature of the sun. Daily weather fluctuations and seasonal position changes can have

  14. Guidelines for waste reduction and recycling: Metal finishing, electroplating, printed circuit board manufacturing

    SciTech Connect

    Not Available

    1989-07-01

    The guidance manual describes waste reduction techniques for metal finishing, metal fabricating, electroplating, and printed circuitboard manufacturing operations. Techniques which can be applied to a wide range of industrial processes and those which are process-specific are discussed. Evaporation, reverse osmosis, ion exchange, electrodialysis, ultrafiltration, and electrolytic recovery are described. The manual also describes waste reduction assessment procedures.

  15. 3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response

    DOE PAGES [OSTI]

    Maiti, A.; Small, W.; Lewicki, J.; Weisgraber, T. H.; Duoss, E. B.; Chinn, S. C.; Pearson, M. A.; Spadaccini, C. M.; Maxwell, R. S.; Wilson, T. S.

    2016-04-27

    3D printing of polymeric foams by direct-ink-write is a recent technological breakthrough that enables the creation of versatile compressible solids with programmable microstructure, customizable shapes, and tunable mechanical response including negative elastic modulus. However, in many applications the success of these 3D printed materials as a viable replacement for traditional stochastic foams critically depends on their mechanical performance and micro-architectural stability while deployed under long-term mechanical strain. To predict the long-term performance of the two types of foams we employed multi-year-long accelerated aging studies under compressive strain followed by a time-temperature-superposition analysis using a minimum-arc-length-based algorithm. The resulting master curvesmore » predict superior long-term performance of the 3D printed foam in terms of two different metrics, i.e., compression set and load retention. To gain deeper understanding, we imaged the microstructure of both foams using X-ray computed tomography, and performed finite-element analysis of the mechanical response within these microstructures. As a result, this indicates a wider stress variation in the stochastic foam with points of more extreme local stress as compared to the 3D printed material, which might explain the latter’s improved long-term stability and mechanical performance.« less

  16. Screen printed silver top electrode for efficient inverted organic solar cells

    SciTech Connect

    Kim, Junwoo; Duraisamy, Navaneethan; Lee, Taik-Min; Kim, Inyoung; Choi, Kyung-Hyun

    2015-10-15

    Highlights: • Screen printing of silver pattern. • X-ray diffraction pattern confirmed the face centered cubic structure of silver. • Uniform surface morphology of silver pattern with sheet resistance of 0.06 Ω/sq. • The power conversion efficiency of fabricated solar cell is found to be 2.58%. - Abstract: The present work is mainly focused on replacement of the vacuum process for top electrode fabrication in organic solar cells. Silver top electrode deposited through solution based screen printing on pre-deposited polymeric thin film. The solution based printing technology provides uniform top electrode without damaging the underlying organic layers. The surface crystallinity and surface morphology of silver top electrode are examined through X-ray diffraction, field-emission scanning electron microscope and atomic force microscope. The purity of silver is examined through X-ray energy dispersive spectroscopy. The top electrode exhibits face centered cubic structure with homogeneous morphology. The sheet resistance of top electrode is found to be 0.06 Ω/sq and an average pattern thickness of ∼15 μm. The power conversion efficiency is 2.58%. Our work demonstrates that the solution based screen printing is a significant role in the replacement of vacuum process for the fabrication of top electrode in organic solar cells.

  17. Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.

    SciTech Connect

    Beck, David Franklin

    2011-01-01

    Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

  18. Seismic Monitoring - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Safety and Resource Protection (PSRP) Seismic Monitoring Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection Home Cultural Resource Program and Curation Services Ecological Monitoring Environmental Surveillance Meteorology and Climatology Services Seismic Monitoring Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Seismic Monitoring Seismic Monitoring Hanford Site Seismic Monitoring provides an uninterrupted collection of

  19. Environmental Surveillance - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Safety and Resource Protection (PSRP) Environmental Surveillance Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection Home Cultural Resource Program and Curation Services Ecological Monitoring Environmental Surveillance Meteorology and Climatology Services Seismic Monitoring Environmental Surveillance Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Environmental Monitoring The MSA project conducts environmental monitoring to

  20. Ecological Monitoring - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Safety and Resource Protection (PSRP) Ecological Monitoring Public Safety and Resource Protection (PSRP) Public Safety and Resource Protection Home Cultural Resource Program and Curation Services Ecological Monitoring Environmental Surveillance Meteorology and Climatology Services Seismic Monitoring Ecological Monitoring Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Ecological Monitoring Ecological Monitoring The Hanford site encompasses 586 square miles