National Library of Energy BETA

Sample records for overhead service length

  1. Reduce overhead by using outside services

    SciTech Connect (OSTI)

    Sanchez, R.O.

    1996-09-01

    This document, after giving a summary of Sandia`s mission, describes technology transfer efforts and accomplishments at Sandia. This includes information on their user facilities: the combustion research facility, the national solar thermal test facility, and the electronics quality and reliability center.

  2. Chapter 13 - OVERHEAD AND GANTRY CRANES

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    3.0 - OVERHEAD AND GANTRY CRANES January 4, 2016 Rev 1 Page 1 CHAPTER 13.0 TABLE OF CONTENTS 13.0 OVERHEAD AND GANTRY CRANES .................................................................................. 3 13.1 SCOPE........................................................................................................3 13.2 GENERAL REQUIREMENTS ................................................................................................. 4 13.3 IMPLEMENTATION

  3. Overhead-Aware-Best-Fit (OABF) Resource Allocation Algorithm for Minimizing VM Launching Overhead

    SciTech Connect (OSTI)

    Wu, Hao; Garzoglio, Gabriele; Ren, Shangping; Timm, Steven; Noh, Seo Young

    2014-11-11

    FermiCloud is a private cloud developed in Fermi National Accelerator Laboratory to provide elastic and on-demand resources for different scientific research experiments. The design goal of the FermiCloud is to automatically allocate resources for different scientific applications so that the QoS required by these applications is met and the operational cost of the FermiCloud is minimized. Our earlier research shows that VM launching overhead has large variations. If such variations are not taken into consideration when making resource allocation decisions, it may lead to poor performance and resource waste. In this paper, we show how we may use an VM launching overhead reference model to minimize VM launching overhead. In particular, we first present a training algorithm that automatically tunes a given refer- ence model to accurately reflect FermiCloud environment. Based on the tuned reference model for virtual machine launching overhead, we develop an overhead-aware-best-fit resource allocation algorithm that decides where and when to allocate resources so that the average virtual machine launching overhead is minimized. The experimental results indicate that the developed overhead-aware-best-fit resource allocation algorithm can significantly improved the VM launching time when large number of VMs are simultaneously launched.

  4. DOE-HDBK-1141-2001; Radiological Assessor Training, Overheads

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Include: * Devices producing ionizing radiation * Sealed sources emitting ionizing radiation * Small particle accelerators * Electron-generating devices OT 12.5 Overhead 12.5 ...

  5. DOE-HDBK-1141-2001; Radiological Assessor Training, Overheads...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OT 1.1 DOE-HDBK-1141-2001 Overhead 1.1 Regulatory Documents Objectives: * Identify the ... Guidance Documents (10 CFR Part 835) Two types: * Implementation guides * Technical ...

  6. Overhead-Aware-Best-Fit (OABF) Resource Allocation Algorithm for Minimizing

    Office of Scientific and Technical Information (OSTI)

    VM Launching Overhead (Conference) | SciTech Connect Conference: Overhead-Aware-Best-Fit (OABF) Resource Allocation Algorithm for Minimizing VM Launching Overhead Citation Details In-Document Search Title: Overhead-Aware-Best-Fit (OABF) Resource Allocation Algorithm for Minimizing VM Launching Overhead FermiCloud is a private cloud developed in Fermi National Accelerator Laboratory to provide elastic and on-demand resources for different scientific research experiments. The design goal of

  7. Report on Analyses of WAC Samples of Evaporator Overheads - 2004

    SciTech Connect (OSTI)

    Oji, L

    2005-03-18

    In November and December of 2004, the Tank Farm submitted annual samples from 2F, 2H and 3H Evaporator Overhead streams for characterization to verify compliance with the new Effluent Treatment Facility (ETF) Waste Acceptance Criteria (WAC) and to look for organic species. With the exception of slightly high ammonia in the 2F evaporator overheads and high radiation control guide number for the 3H and 2F evaporator overhead samples, all the overheads samples were found to be in compliance with the Effluent Treatment Facility WAC. The ammonium concentration in the 2F-evaporator overhead, at 33 mg/L, was above the ETF waste water collection tank (WWCT) limits of 28 mg/L. The RCG Number for the 3H and 2F evaporator samples at, respectively, 1.38E-02 and 8.24E-03 were higher than the WWCT limit of 7.69E-03. The analytical detection limits for americium-241 and radium-226 in the evaporator samples were not consistently met because of low WWCT detection limits and insufficient evaporator samples.

  8. Modeling Spatial Dependencies in High-Resolution Overhead Imagery

    SciTech Connect (OSTI)

    Cheriyadat, Anil M; Bright, Eddie A; Vatsavai, Raju

    2011-01-01

    Human settlement regions with different physical and socio-economic attributes exhibit unique spatial characteristics that are often illustrated in high-resolution overhead imageries. For example- size, shape and spatial arrangements of man-made structures are key attributes that vary with respect to the socioeconomic profile of the neighborhood. Successfully modeling these attributes is crucial in developing advanced image understanding systems for interpreting complex aerial scenes. In this paper we present three different approaches to model the spatial context in the overhead imagery. First, we show that the frequency domain of the image can be used to model the spatial context [1]. The shape of the spectral energy contours characterize the scene context and can be exploited as global features. Secondly, we explore a discriminative framework based on the Conditional Random Fields (CRF) [2] to model the spatial context in the overhead imagery. The features derived from the edge orientation distribution calculated for a neighborhood and the associated class labels are used as input features to model the spatial context. Our third approach is based on grouping spatially connected pixels based on the low-level edge primitives to form support-regions [3]. The statistical parameters generated from the support-region feature distributions characterize different geospatial neighborhoods. We apply our approaches on high-resolution overhead imageries. We show that proposed approaches characterize the spatial context in overhead imageries.

  9. Operating Experience Level 3, Danger! Equipment Hits Overhead Lines

    Energy.gov [DOE]

    OE-3 2016-01: This Operating Experience Level 3 (OE-3) document provides information about a safety concern related to workers and operations at Department of Energy (DOE) facilities where equipment has struck overhead communication cables and energized power lines.

  10. Recommended U-factors for swinging, overhead, and revolving doors

    SciTech Connect (OSTI)

    Carpenter, S.C.; Hogan, J.

    1996-11-01

    Doors are often an overlooked component in the thermal integrity of the building envelope. Although swinging doors represent a small portion of the shell in residential buildings, their U-factor is usually many times higher than those of walls or ceilings. In some commercial buildings, loading (overhead) doors represent a significant area of high heat loss. Contrary to common perception, there is a wide range in the design, type, and therefore thermal performance of doors. The 1997 ASHRAE Handbook of Fundamentals will contain expanded tables of door U-factors to account for these product variations. This paper presents the results of detailed computer simulations of door U-factors. Recommended U-factors for glazed and unglazed residential and commercial swinging doors and commercial/industrial overhead and revolving doors are presented.

  11. Effective Methods in Reducing Communication Overheads in Solving

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    0/2002 Yun (Helen) He, GHC2002 1 Effective Methods in Reducing Communication Overheads in Solving PDE Problems on Distributed-Memory Computer Architectures Chris Ding and Yun (Helen) He Lawrence Berkeley National Laboratory 10/10/2002 Yun (Helen) He, GHC2002 2 Outline n Introduction n Traditional Method n Ghost Cell Expansion (GCE) Method n GCE Algorithm n Diagonal Communication Elimination (DCE) Technique n Analysis of GCE Method n Message Volume n Communication Time

  12. Modeling the Virtual Machine Launching Overhead under Fermicloud

    SciTech Connect (OSTI)

    Garzoglio, Gabriele; Wu, Hao; Ren, Shangping; Timm, Steven; Bernabeu, Gerard; Noh, Seo-Young

    2014-11-12

    FermiCloud is a private cloud developed by the Fermi National Accelerator Laboratory for scientific workflows. The Cloud Bursting module of the FermiCloud enables the FermiCloud, when more computational resources are needed, to automatically launch virtual machines to available resources such as public clouds. One of the main challenges in developing the cloud bursting module is to decide when and where to launch a VM so that all resources are most effectively and efficiently utilized and the system performance is optimized. However, based on FermiCloud’s system operational data, the VM launching overhead is not a constant. It varies with physical resource (CPU, memory, I/O device) utilization at the time when a VM is launched. Hence, to make judicious decisions as to when and where a VM should be launched, a VM launch overhead reference model is needed. The paper is to develop a VM launch overhead reference model based on operational data we have obtained on FermiCloud and uses the reference model to guide the cloud bursting process.

  13. Parallel garbage collection without synchronization overhead. Technical report

    SciTech Connect (OSTI)

    Patel, J.H.

    1984-08-01

    Incremental garbage-collection schemes incur substantial overhead that is directly translated as reduced execution efficiency for the user. Parallel garbage-collection schemes implemented via time-slicing on a serial processor also incur this overhead, which might even be aggravated due to context switching. It is useful, therefore, to examine the possibility of implementing a parallel garbage-collection algorithm using a separate processor operating asynchronously with the main-list processor. The overhead in such a scheme arises from the synchronization necessary to manage the two processors, maintaining memory consistency. In this paper, the authors present an architecture and supporting parallel garbage-collection algorithms designed for a virtual memory system with separate processors for list processing and for garbage collection. Each processor has its own primary memory; in addition, there is a small common memory which both processors may access. Individual memories swap off a common secondary memory, but no locking mechanism is required. In particular, a page may reside in both memories simultaneously, and indeed may be accessed and modified freely by each processor. A secondary memory controller ensures consistency without necessitating numerous lockouts on the pages.

  14. Path-sensitive analysis for reducing rollback overheads

    DOE Patents [OSTI]

    O'Brien, John K.P.; Wang, Kai-Ting Amy; Yamashita, Mark; Zhuang, Xiaotong

    2014-07-22

    A mechanism is provided for path-sensitive analysis for reducing rollback overheads. The mechanism receives, in a compiler, program code to be compiled to form compiled code. The mechanism divides the code into basic blocks. The mechanism then determines a restore register set for each of the one or more basic blocks to form one or more restore register sets. The mechanism then stores the one or more register sets such that responsive to a rollback during execution of the compiled code. A rollback routine identifies a restore register set from the one or more restore register sets and restores registers identified in the identified restore register set.

  15. Steal Tree: Low-Overhead Tracing of Work Stealing Schedulers

    SciTech Connect (OSTI)

    Lifflander, Jonathan; Krishnamoorthy, Sriram; Kale, Laxmikant

    2013-06-16

    Work stealing is a popular approach to scheduling task-parallel programs. The flexibility inherent in work stealing when dealing with load imbalance results in seemingly irregular computation structures, complicating the study of its runtime behavior. In this paper, we present an approach to efficiently trace async-finish parallel programs scheduled using work stealing. We identify key properties that allow us to trace the execution of tasks with low time and space overheads. We also study the usefulness of the proposed schemes in supporting algorithms for data-race detection and retentive steal- ing presented in the literature. We demonstrate that the perturbation due to tracing is within the variation in the execution time with 99% confidence and the traces are concise, amounting to a few tens of kilobytes per thread in most cases. We also demonstrate that the traces enable significant reductions in the cost of detecting data races and result in low, stable space overheads in supporting retentive stealing for async-finish programs.

  16. Services

    Energy.gov [DOE]

    The Office of Management provides many of the services that keep the Department of Energy Headquarters offices operational. Other Program Offices also provide services to the employees at...

  17. Services

    Energy.gov [DOE]

    The Human Capital Office offers benefit, new employee orientation and some learning & development related services to all DOE employees. Additionally the Office supplies employee and labor...

  18. Services

    Energy.gov [DOE]

    The ultimate objective of DOE's Project Management System is to deliver capital asset projects within the original performance baseline, on schedule, within budget, and fully capable of meeting mission requirements. The Resource Center consolidates and provides access to key tools and services for accomplishing this objective. The target audience is DOE’s Federal and Contractor Project Management community.

  19. Development and application of composite overhead ground wire with optical fibers

    SciTech Connect (OSTI)

    Tsujimoto, K.; Kato, T.; Okazato, A.; Sakurada, H.

    1983-05-01

    A overhead ground wire composed with optical fibers has been developed, as well as the accessories and the joints. The overhead ground wire is provided with an aluminum pipe at the core thereof in which the optical fibers are inserted. The composite overhead ground wire with optical fibers was installed for the Kaga-Reinan 500 kV overhead transmission line in autumn, 1981 for the purposes of observing lightning and using as telecommunication line, as well. After the successful performance of the optical fiber, especially in view of transmission loss after installation, has been proved, the composite overhead ground wire is now being checked for the purposes as stated above. The ground wire was also installed for the Tsuruga Test Line at about the same time and investigations were started to confirm the reliability of the optical fiber to be over a long period of time under severe meteorological conditions such as strong winds and icing. The construction of the composite ground wire with optical fibers is such that the optical fibers contained therein are not restrained by the ground wire itself. This enables insertion and pulling out of optical fiber cables. Tests were conducted at certain sections of the Kaga-Reinan Line to confirm that there was no change in the performance of the optical fibers due to such operations of insertion and pulling out. This report briefly discusses the development of the composite ground wire with optical fibers, its installation and the test results.

  20. Smart patch integration development of compression connector structural health monitoring in overhead transmission lines

    SciTech Connect (OSTI)

    Wang, Hong; Wang, Jy-An John; Ren, Fei; Chan, John

    2016-01-01

    Integration of smart patches into full-tension splice connectors in overhead power transmission lines was investigated. Lead zirconate titanate (PZT) -5A was used as a smart material and an aluminum beam was used as a host structure. Negative electrode termination was examined by using copper adhesive tape and direct bonding methods. Various commercial adhesives were studied for PZT integration onto the host structure. Aluminum beam specimens with integrated PZT smart patches were tested under thermal cycling at a temperature of 125 C, which is the higher-end temperature experienced by in-service aluminum conductor steel-reinforced cables. Electromechanical impedance (EMI) measurements were conducted at room temperature, and the root mean square deviation (RMSD) of the conductance signals was used to analyze the EMI data. It has been shown that the negative electrode method has an important effect on the performance of the integrated PZT. The PZT displayed more susceptibility to cracking when copper tape was used than when direct bonding was used. The reliability of PZT in direct bonding depended on the adhesives used in bonding layers. Although a hard alumina based adhesive can lead to cracking of the PZT, a high-temperature epoxy with adequate flexibility, such as Duralco 4538D, can provide the desired performance under target thermal cycling conditions. The RMSD parameter can characterize conductance signatures effectively. It also was demonstrated that RMSD can be used to quantify the fatigue of the PZT integration system, although RMSD is used primarily as a damage index in monitoring structural health.

  1. A Testing Platform for Validation of Overhead Conductor Aging Models and Understanding Thermal Limits

    SciTech Connect (OSTI)

    Irminger, Philip; Starke, Michael R; Dimitrovski, Aleksandar D; Young II, Marcus Aaron; Rizy, D Tom; Stovall, John P; Overholt, Philip N

    2014-01-01

    Power system equipment manufacturers and researchers continue to experiment with novel overhead electric conductor designs that support better conductor performance and address congestion issues. To address the technology gap in testing these novel designs, Oak Ridge National Laboratory constructed the Powerline Conductor Accelerated Testing (PCAT) facility to evaluate the performance of novel overhead conductors in an accelerated fashion in a field environment. Additionally, PCAT has the capability to test advanced sensors and measurement methods for accessing overhead conductor performance and condition. Equipped with extensive measurement and monitoring devices, PCAT provides a platform to improve/validate conductor computer models and assess the performance of novel conductors. The PCAT facility and its testing capabilities are described in this paper.

  2. Characterization Results For The 2013 HTF 3H Evaporator Overhead Samples

    SciTech Connect (OSTI)

    Washington, A. L. II

    2013-12-04

    This report tabulates the radiochemical analysis of the 3H evaporator overhead sample for {sup 137}Cs, {sup 90}Sr, and {sup 129}I to meet the requirements in the Effluent Treatment Project (ETP) Waste Acceptance Criteria (WAC) (rev. 6). This report identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. All data was found to be within the ETP WAC (rev. 6) specification for the Waste Water Collection Tanks (WWCT).

  3. Editorial: Redefining Length

    SciTech Connect (OSTI)

    Sprouse, Gene D.

    2011-07-15

    Technological changes have moved publishing to electronic-first publication where the print version has been relegated to simply another display mode. Distribution in HTML and EPUB formats, for example, changes the reading environment and reduces the need for strict pagination. Therefore, in an effort to streamline the calculation of length, the APS journals will no longer use the printed page as the determining factor for length. Instead the journals will now use word counts (or word equivalents for tables, figures, and equations) to establish length; for details please see http://publish.aps.org/authors/length-guide. The title, byline, abstract, acknowledgment, and references will not be included in these counts allowing authors the freedom to appropriately credit coworkers, funding sources, and the previous literature, bringing all relevant references to the attention of readers. This new method for determining length will be easier for authors to calculate in advance, and lead to fewer length-associated revisions in proof, yet still retain the quality of concise communication that is a virtue of short papers.

  4. Characterization Results for the 2014 HTF 3H & 2H Evaporator Overhead Samples

    SciTech Connect (OSTI)

    Washington, A.

    2015-05-11

    This report tabulates the radiochemical analysis of the 3H and 2H evaporator overhead samples for 137Cs, 90Sr, and 129I to meet the requirements in the Effluent Treatment Project (ETP) Waste Acceptance Criteria (WAC) (rev. 6). This report identifies the sample receipt date, preparation method, and analysis performed in the accumulation of the listed values. All data was found to be within the ETP WAC (rev. 6) specification for the Waste Water Collection Tanks (WWCT).

  5. SMAC: A soft MAC to reduce control overhead and latency in CDMA-based AMI networks

    SciTech Connect (OSTI)

    Garlapati, Shravan; Kuruganti, Teja; Buehrer, Michael R.; Reed, Jeffrey H.

    2015-10-26

    The utilization of state-of-the-art 3G cellular CDMA technologies in a utility owned AMI network results in a large amount of control traffic relative to data traffic, increases the average packet delay and hence are not an appropriate choice for smart grid distribution applications. Like the CDG, we consider a utility owned cellular like CDMA network for smart grid distribution applications and classify the distribution smart grid data as scheduled data and random data. Also, we propose SMAC protocol, which changes its mode of operation based on the type of the data being collected to reduce the data collection latency and control overhead when compared to 3G cellular CDMA2000 MAC. The reduction in the data collection latency and control overhead aids in increasing the number of smart meters served by a base station within the periodic data collection interval, which further reduces the number of base stations needed by a utility or reduces the bandwidth needed to collect data from all the smart meters. The reduction in the number of base stations and/or the reduction in the data transmission bandwidth reduces the CAPital EXpenditure (CAPEX) and OPerational EXpenditure (OPEX) of the AMI network. Finally, the proposed SMAC protocol is analyzed using markov chain, analytical expressions for average throughput and average packet delay are derived, and simulation results are also provided to verify the analysis.

  6. SMAC: A soft MAC to reduce control overhead and latency in CDMA-based AMI networks

    DOE PAGES-Beta [OSTI]

    Garlapati, Shravan; Kuruganti, Teja; Buehrer, Michael R.; Reed, Jeffrey H.

    2015-10-26

    The utilization of state-of-the-art 3G cellular CDMA technologies in a utility owned AMI network results in a large amount of control traffic relative to data traffic, increases the average packet delay and hence are not an appropriate choice for smart grid distribution applications. Like the CDG, we consider a utility owned cellular like CDMA network for smart grid distribution applications and classify the distribution smart grid data as scheduled data and random data. Also, we propose SMAC protocol, which changes its mode of operation based on the type of the data being collected to reduce the data collection latency andmore » control overhead when compared to 3G cellular CDMA2000 MAC. The reduction in the data collection latency and control overhead aids in increasing the number of smart meters served by a base station within the periodic data collection interval, which further reduces the number of base stations needed by a utility or reduces the bandwidth needed to collect data from all the smart meters. The reduction in the number of base stations and/or the reduction in the data transmission bandwidth reduces the CAPital EXpenditure (CAPEX) and OPerational EXpenditure (OPEX) of the AMI network. Finally, the proposed SMAC protocol is analyzed using markov chain, analytical expressions for average throughput and average packet delay are derived, and simulation results are also provided to verify the analysis.« less

  7. The Reliability Investigation on ACSR Splice Connector Systems Used in Overhead Power transmission Lines

    SciTech Connect (OSTI)

    Wang, Jy-An John; Jiang, Hao; Ren, Fei

    2012-01-01

    Due to material discontinuity and inherited forming mechanism from a crimped-type splice connector, the associated conductor-connector system is highly sensitive to system components aging, especially during high-temperature operations. Furthermore, due to the increase in power demand and limited investment in new infrastructure, existing overhead power transmission lines often need to operate at temperatures higher than the original designed values. This has led to the accelerated aging and degradation of conductor-connector systems. The implications of connector aging are two-fold: (1) significant increase in resistivity of the splice connector and (2) significant reduction in the connector clamping strength. Therefore, splice connectors are one of the weakest links in the electric power transmission infrastructure. In this paper we will discuss the reliability of splice connector systems, including both single stage and two stage splice connectors, used in ACSR conductor of transmission lines under high temperature operations.

  8. NIOSH alert: Request for assistance in preventing electrocutions of crane operators and crew members working near overhead power lines

    SciTech Connect (OSTI)

    1995-05-01

    In this alert, NIOSH warned that crane operators and crew members may be electrocuted when working near overhead power lines. Five cases were described which resulted in six electrocutions. Case 1 involved a 29 year old who pushed the crane cable on a 1 yard cement bucket into a 7,200 volt power line. Case 2 involved a 33 year old well driller who was electrocuted when a metal pipe lifted by a truck mounted crane contacted a 12,000 volt overhead power line. The third case involved a 24 year old forman for a telecommunications company who was electrocuted when he grabbed the door handle of a truck mounted crane whose boom was in contact with a 7,200 volt overhead power line. Case 4 involved a 37 year old construction laborer electrocuted while pulling a wire rope attached to a crane cable toward a load. The fifth case involved a 20 year old male truck driver and his 70 year old male employer who were electrocuted when the boom of a truck mounted crane contacted a 7,200 volt conductor of an overhead power line.

  9. Performance Evaluation for Modular, Scalable Overhead Cooling Systems In Data Centers

    SciTech Connect (OSTI)

    Xu, TengFang T.

    2009-05-01

    installed in a data center. Such modular cooling systems are all scalable localized units, and will be evaluated in terms of their operating energy efficiency in a real data center, respectively, as compared to the energy efficiency of traditional legacy data center cooling systems. The technical objective of this project was to evaluate the energy performance of one of the four commercially available modular cooling systems installed in a data center in Sun Microsystems, Inc. This report is the result of a test plan that was developed with the industrial participants' input, including specific design and operating characteristics of the selected modular localized cooling solution provided by vendor 1. The technical evaluation included monitoring and measurement of selected parameters, and establishing and calculating energy efficiency metrics for the selected cooling product, which is a modular, scalable overhead cooling system. The system was tested in a hot/cold aisle environment without separation, or containment or the hot or cold aisles. The scope of this report is to quantify energy performance of the modular cooling unit in operation as it corresponds to a combination of varied server loads and inlet air temperatures. The information generated from this testing when combined with a concurrent research study to document the energy efficiency of the host data center's central chilled water cooling plant can be used to estimate potential energy savings from implementing modular cooling compared to conventional cooling in data centers.

  10. Continuously variable focal length lens

    DOE Patents [OSTI]

    Adams, Bernhard W; Chollet, Matthieu C

    2013-12-17

    A material preferably in crystal form having a low atomic number such as beryllium (Z=4) provides for the focusing of x-rays in a continuously variable manner. The material is provided with plural spaced curvilinear, optically matched slots and/or recesses through which an x-ray beam is directed. The focal length of the material may be decreased or increased by increasing or decreasing, respectively, the number of slots (or recesses) through which the x-ray beam is directed, while fine tuning of the focal length is accomplished by rotation of the material so as to change the path length of the x-ray beam through the aligned cylindrical slows. X-ray analysis of a fixed point in a solid material may be performed by scanning the energy of the x-ray beam while rotating the material to maintain the beam's focal point at a fixed point in the specimen undergoing analysis.

  11. Continuous lengths of oxide superconductors

    DOE Patents [OSTI]

    Kroeger, Donald M.; List, III, Frederick A.

    2000-01-01

    A layered oxide superconductor prepared by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon. A continuous length of a second substrate ribbon is overlaid on the first substrate ribbon. Sufficient pressure is applied to form a bound layered superconductor precursor powder between the first substrate ribbon and the second substrate ribbon. The layered superconductor precursor is then heat treated to establish the oxide superconducting phase. The layered oxide superconductor has a smooth interface between the substrate and the oxide superconductor.

  12. Ultra-scale vehicle tracking in low spatial-resolution and low frame-rate overhead video

    SciTech Connect (OSTI)

    Carrano, C J

    2009-05-20

    Overhead persistent surveillance systems are becoming more capable at acquiring wide-field image sequences for long time-spans. The need to exploit this data is becoming ever greater. The ability to track a single vehicle of interest or to track all the observable vehicles, which may number in the thousands, over large, cluttered regions while they persist in the imagery either in real-time or quickly on-demand is very desirable. With this ability we can begin to answer a number of interesting questions such as, what are normal traffic patterns in a particular region or where did that truck come from? There are many challenges associated with processing this type of data, some of which we will address in the paper. Wide-field image sequences are very large with many thousands of pixels on a side and are characterized by lower resolutions (e.g. worse than 0.5 meters/pixel) and lower frame rates (e.g. a few Hz or less). The objects in the scenery can vary in size, density, and contrast with respect to the background. At the same time the background scenery provides a number of clutter sources both man-made and natural. We describe our current implementation of an ultrascale capable multiple-vehicle tracking algorithm for overhead persistent surveillance imagery as well as discuss the tracking and timing performance of the currently implemented algorithm which is aimed at utilizing grayscale electrooptical image sequences alone for the track segment generation.

  13. Service Buildings

    U.S. Energy Information Administration (EIA) (indexed site)

    Service Characteristics by Activity... Service Service buildings are those in which some type of service is provided, other than food service or retail sales of goods. Basic...

  14. Variable focal length deformable mirror

    SciTech Connect (OSTI)

    Headley, Daniel; Ramsey, Marc; Schwarz, Jens

    2007-06-12

    A variable focal length deformable mirror has an inner ring and an outer ring that simply support and push axially on opposite sides of a mirror plate. The resulting variable clamping force deforms the mirror plate to provide a parabolic mirror shape. The rings are parallel planar sections of a single paraboloid and can provide an on-axis focus, if the rings are circular, or an off-axis focus, if the rings are elliptical. The focal length of the deformable mirror can be varied by changing the variable clamping force. The deformable mirror can generally be used in any application requiring the focusing or defocusing of light, including with both coherent and incoherent light sources.

  15. Increasing the reliability of the shutdown of 500 - 750-kV overhead lines equipped with shunt reactors in an unsuccessful three-phase automatic repeated closure cycle

    SciTech Connect (OSTI)

    Kuz'micheva, K. I.; Merzlyakov, A. S.; Fokin, G. G.

    2013-05-15

    The reasons for circuit-breaker failures during repeated disconnection of 500 - 750 kV overhead lines with shunt reactors in a cycle of unsuccessful three-phase automatic reconnection (TARC) are analyzed. Recommendations are made for increasing the operating reliability of power transmission lines with shunt reactors when there is unsuccessful reconnection.

  16. Property:Length(m) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Length(m) Jump to: navigation, search This is a property of type String, and provides a complied list of the lengths of various hydrodynamic testing facilities. Pages using the...

  17. EA-0962: Construction and Routine Operation of a 12-kilovolt Overhead Powerline and Formal Authorization for a 10-inch and 8-inch Fresh Water Pipeline Right-of-Way at Naval Petroleum Reserve No. 1, Kern County, California

    Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to install an overhead powerline extension from the U.S. Department of Energy's Naval Petroleum Reserve No. 1 (NPR-1) power source to the...

  18. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services shutterstock_106609430_jpg.jpg

  19. Mixing lengths scaling in a gravity flow

    SciTech Connect (OSTI)

    Ecke, Robert E [Los Alamos National Laboratory; Rivera, Micheal [Los Alamos National Laboratory; Chen, Jun [Los Alamos National Laboratory; Ecke, Robert E [Los Alamos National Laboratory

    2009-01-01

    We present an experimental study of the mixing processes in a gravity current. The turbulent transport of momentum and buoyancy can be described in a very direct and compact form by a Prandtl mixing length model [1]: the turbulent vertical fluxes of momentum and buoyancy are found to scale quadraticatly with the vertical mean gradients of velocity and density. The scaling coefficient is the square of the mixing length, approximately constant over the mixing zone of the stratified shear layer. We show in this paper how, in different flow configurations, this length can be related to the shear length of the flow {radical}({var_epsilon}/{partial_derivative}{sub z}u{sup 3}).

  20. Process for fabricating continuous lengths of superconductor

    DOE Patents [OSTI]

    Kroeger, Donald M.; List, III, Frederick A.

    1998-01-01

    A process for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor precursor between said first substrate ribbon and said second substrates ribbon. The layered superconductor precursor is then heat treated to form a super conductor layer.

  1. Crystal diffraction lens with variable focal length

    DOE Patents [OSTI]

    Smither, R.K.

    1991-04-02

    A method and apparatus for altering the focal length of a focusing element of one of a plurality of pre-determined focal lengths by changing heat transfer within selected portions of the element by controlled quantities is disclosed. Control over heat transfer is accomplished by manipulating one or more of a number of variables, including: the amount of heat or cold applied to surfaces; type of fluids pumped through channels for heating and cooling; temperatures, directions of flow and rates of flow of fluids; and placement of channels. 19 figures.

  2. Crystal diffraction lens with variable focal length

    DOE Patents [OSTI]

    Smither, Robert K.

    1991-01-01

    A method and apparatus for altering the focal length of a focusing element o one of a plurality of pre-determined focal lengths by changing heat transfer within selected portions of the element by controlled quantities. Control over heat transfer is accomplished by manipulating one or more of a number of variables, including: the amount of heat or cold applied to surfaces; type of fluids pumped through channels for heating and cooling; temperatures, directions of flow and rates of flow of fluids; and placement of channels.

  3. Apparatus for fabricating continuous lengths of superconductor

    DOE Patents [OSTI]

    Kroeger, Donald M.; List, III, Frederick A.

    2001-01-01

    A process and apparatus for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor comprising a layer of said superconducting precursor powder between said first substrate ribbon and said second substrates ribbon. The layered superconductor is then heat treated to establish the superconducting phase of said superconductor precursor powder.

  4. Apparatus for fabricating continuous lengths of superconductor

    DOE Patents [OSTI]

    Kroeger, Donald M.; List, III, Frederick A.

    2002-01-01

    A process and apparatus for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor comprising a layer of said superconducting precursor powder between said first substrate ribbon and said second substrates ribbon. The layered superconductor is then heat treated to establish the superconducting phase of said superconductor precursor powder.

  5. Sighting optics including an optical element having a first focal length and a second focal length

    DOE Patents [OSTI]

    Crandall, David Lynn

    2011-08-01

    One embodiment of sighting optics according to the teachings provided herein may include a front sight and a rear sight positioned in spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus, for a user, images of the front sight and the target.

  6. User Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Home Contact User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment...

  7. Bunch length measurements using synchrotron ligth monitor

    SciTech Connect (OSTI)

    Ahmad, Mahmoud; Tiefenback, Michael G.

    2015-09-01

    The bunch length is measured at CEBAF using an invasive technique. The technique depends on applying an energy chirp for the electron bunch and imaging it through a dispersive region. The measurements are taken through Arc1 and Arc2 at CEBAF. The fundamental equations, procedure and the latest results are given.

  8. Financing, Overhead, and Profit: An In-Depth Discussion of Costs Associated with Third-Party Financing of Residential and Commercial Photovoltaic Systems

    SciTech Connect (OSTI)

    Feldman, D.; Friedman, B.; Margolis, R.

    2013-10-01

    Previous work quantifying the non-hardware balance-of-system costs -- or soft costs -- associated with building a residential or commercial photovoltaic (PV) system has left a significant portion unsegmented in an 'other soft costs' category. This report attempts to better quantify the 'other soft costs' by focusing on the financing, overhead, and profit of residential and commercial PV installations for a specific business model. This report presents results from a bottom-up data-collection and analysis of the upfront costs associated with developing, constructing, and arranging third-party-financed residential and commercial PV systems. It quantifies the indirect corporate costs required to install distributed PV systems as well as the transactional costs associated with arranging third-party financing.

  9. Property:Maximum Wave Length(m) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Length(m) Jump to: navigation, search Property Name Maximum Wave Length(m) Property Type String Pages using the property "Maximum Wave Length(m)" Showing 18 pages using this...

  10. Slip length crossover on a graphene surface

    SciTech Connect (OSTI)

    Liang, Zhi; Keblinski, Pawel

    2015-04-07

    Using equilibrium and non-equilibrium molecular dynamics simulations, we study the flow of argon fluid above the critical temperature in a planar nanochannel delimited by graphene walls. We observe that, as a function of pressure, the slip length first decreases due to the decreasing mean free path of gas molecules, reaches the minimum value when the pressure is close to the critical pressure, and then increases with further increase in pressure. We demonstrate that the slip length increase at high pressures is due to the fact that the viscosity of fluid increases much faster with pressure than the friction coefficient between the fluid and the graphene. This behavior is clearly exhibited in the case of graphene due to a very smooth potential landscape originating from a very high atomic density of graphene planes. By contrast, on surfaces with lower atomic density, such as an (100) Au surface, the slip length for high fluid pressures is essentially zero, regardless of the nature of interaction between fluid and the solid wall.

  11. Boiling water reactor-full length emergency core cooling heat...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Boiling water reactor-full length emergency core cooling heat transfer ... Citation Details In-Document Search Title: Boiling water reactor-full length emergency ...

  12. Engineering Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Services Engineering Services The Network OSCARS Fasterdata IPv6 Network Network Performance Tools The ESnet Engineering Team Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Engineering Services ESnet provides interoperable, effective, reliable, and high performance network communications infrastructure, and certain

  13. Service Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form...

  14. Crack length determination by ultrasonic methods

    SciTech Connect (OSTI)

    Rehbein, D.K.; Thompson, R.B.; Buck, O.

    1992-01-01

    Under the restriction of being able to operate in through transmission with focussed transducers, it has been shown that the location of the tip of a fatigue crack can be determined to within 0.5 mm in those cases where curvature of the crack front is significant with correspondingly better accuracy as the curvature decreases. Location of the crack tip is accomplished through use of the distributed spring model and also yields information on the residual stresses due to closure. The technique used is able to determine the crack length to within [plus minus] 0.5 mm in the unloaded condition in contrast to most of the work done previously, removing the necessity for application of a load sufficient to fully open the crack.

  15. Crack length determination by ultrasonic methods

    SciTech Connect (OSTI)

    Rehbein, D.K.; Thompson, R.B.; Buck, O.

    1992-12-31

    Under the restriction of being able to operate in through transmission with focussed transducers, it has been shown that the location of the tip of a fatigue crack can be determined to within 0.5 mm in those cases where curvature of the crack front is significant with correspondingly better accuracy as the curvature decreases. Location of the crack tip is accomplished through use of the distributed spring model and also yields information on the residual stresses due to closure. The technique used is able to determine the crack length to within {plus_minus} 0.5 mm in the unloaded condition in contrast to most of the work done previously, removing the necessity for application of a load sufficient to fully open the crack.

  16. Quark ensembles with the infinite correlation length

    SciTech Connect (OSTI)

    Zinov’ev, G. M.; Molodtsov, S. V.

    2015-01-15

    A number of exactly integrable (quark) models of quantum field theory with the infinite correlation length have been considered. It has been shown that the standard vacuum quark ensemble—Dirac sea (in the case of the space-time dimension higher than three)—is unstable because of the strong degeneracy of a state, which is due to the character of the energy distribution. When the momentum cutoff parameter tends to infinity, the distribution becomes infinitely narrow, leading to large (unlimited) fluctuations. Various vacuum ensembles—Dirac sea, neutral ensemble, color superconductor, and BCS state—have been compared. In the case of the color interaction between quarks, the BCS state has been certainly chosen as the ground state of the quark ensemble.

  17. LACED Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The expertise, capabilities, and facilities at Los Alamos enable use to provide a full suite of services that caters to countering explosive threats. v At LACED, we believe that ...

  18. User Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users...

  19. Stimulated forward Raman scattering in large scale-length laser...

    Office of Scientific and Technical Information (OSTI)

    in large scale-length laser-produced plasmas Citation Details In-Document Search Title: Stimulated forward Raman scattering in large scale-length laser-produced plasmas You ...

  20. Consulting Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Consulting Services Consulting Services Consulting Consultants and Account Support staff are available to assist users from 8 AM to 5 PM Pacific time, Monday through Friday (except Berkeley Lab holidays). Questions and problems submitted through the On-Line Help Desk are immediately sent to the consulting staff and this is the preferred method of communication. NERSC staff can be reached at 1-800-66-NERSC (USA) or 510-486-8600 (local and international); or email consult@nersc.gov to speak with a

  1. Transmission Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Transmission Services BPA Clarifications on the DSO216 1 Document updated on 2242015 at 3:29:25 PM B O N N E V I L L E P O W E R A D M I N I S T R A T I O N BPA Clarifications on...

  2. Far-from-equilibrium measurements of thermodynamic length

    SciTech Connect (OSTI)

    Feng, Edward H.; Crooks, Gavin E.

    2008-11-05

    Thermodynamic length is a path function that generalizes the notion of length to the surface of thermodynamic states. Here, we show how to measure thermodynamic length in far-from-equilibrium experiments using the work fluctuation relations. For these microscopic systems, it proves necessary to define the thermodynamic length in terms of the Fisher information. Consequently, the thermodynamic length can be directly related to the magnitude of fluctuations about equilibrium. The work fluctuation relations link the work and the free energy change during an external perturbation on a system. We use this result to determine equilibrium averages at intermediate points of the protocol in which the system is out-of-equilibrium. This allows us to extend Bennett's method to determine the potential of mean force, as well as the thermodynamic length, in single molecule experiments.

  3. Diffraction effects in the coherent transition radiation bunch length diagnostics

    SciTech Connect (OSTI)

    Kazakevich, G.; Lebedev, V.; Nagaitsev, S.; /Fermilab

    2007-08-01

    Diffraction effects in the Coherent Transition Radiation (CTR) bunch length diagnostics are considered for the A0 Photoinjector and the New Muon Laboratory (NML) injection module. The effects can cause a noticeable distortion of the measured CTR spectra depending on the experimental setup and the bunch parameters and resulting in errors of the bunch length measurements. Presented calculations show possible systematic errors in the bunch length in measurements based on the CTR spectra at A0 Photo injector and the NML injection module.

  4. Stimulated forward Raman scattering in large scale-length laser...

    Office of Scientific and Technical Information (OSTI)

    Stimulated forward Raman scattering in large scale-length laser-produced plasmas Citation Details In-Document Search Title: Stimulated forward Raman scattering in large ...

  5. Assessment of Possible Cycle Lengths for Fully Encapsulated Microstruc...

    Office of Scientific and Technical Information (OSTI)

    light water reactor Concepts Citation Details In-Document Search Title: Assessment of Possible Cycle Lengths for Fully Encapsulated Microstructure fueled light water reactor ...

  6. SCIENCE ON SATURDAY- "A Short History of Length" | Princeton...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SCIENCE ON SATURDAY- "A Short History of Length" Professor Joel Langer Department of Mathematics, Case Western Reserve University Presentation: PDF icon SOS09MAR2013JLangerAShort...

  7. Enforcement Letter Issued to LVI Services, Inc

    Office of Environmental Management (EM)

    The energy in the line is controlled by a photovoltaic cell that allows electrical current ... The rising sun and the brim of his hardhat obstructed the operator's view of the overhead ...

  8. Sighting optics including an optical element having a first focal length and a second focal length and methods for sighting

    DOE Patents [OSTI]

    Crandall, David Lynn

    2011-08-16

    Sighting optics include a front sight and a rear sight positioned in a spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus for a user images of the front sight and the target.

  9. Power Services (pbl/about)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    About Power Services > About Power Services Power Services Home Page Other Related Web Sites Power Services Organization Power Services Financial Information Tribal Affairs Office...

  10. Exploiting Universality in Atoms with Large Scattering Lengths

    SciTech Connect (OSTI)

    Braaten, Eric

    2012-05-31

    The focus of this research project was atoms with scattering lengths that are large compared to the range of their interactions and which therefore exhibit universal behavior at sufficiently low energies. Recent dramatic advances in cooling atoms and in manipulating their scattering lengths have made this phenomenon of practical importance for controlling ultracold atoms and molecules. This research project was aimed at developing a systematically improvable method for calculating few-body observables for atoms with large scattering lengths starting from the universal results as a first approximation. Significant progress towards this goal was made during the five years of the project.

  11. Fact #615: March 22, 2010 Average Vehicle Trip Length

    Energy.gov [DOE]

    According to the latest National Household Travel Survey, the average trip length grew to over 10 miles in 2009, just slightly over the 9.9 mile average in 2001. Trips to work in 2009 increased to...

  12. Assessment of Possible Cycle Lengths for Fully-Ceramic Micro...

    Office of Scientific and Technical Information (OSTI)

    Light Water Reactor Concepts Citation Details In-Document Search Title: Assessment of Possible Cycle Lengths for Fully-Ceramic Micro-Encapsulated Fuel-Based Light Water Reactor ...

  13. Adding Data Management Services to Parallel File Systems

    SciTech Connect (OSTI)

    Brandt, Scott

    2015-03-04

    The objective of this project, called DAMASC for “Data Management in Scientific Computing”, is to coalesce data management with parallel file system management to present a declarative interface to scientists for managing, querying, and analyzing extremely large data sets efficiently and predictably. Managing extremely large data sets is a key challenge of exascale computing. The overhead, energy, and cost of moving massive volumes of data demand designs where computation is close to storage. In current architectures, compute/analysis clusters access data in a physically separate parallel file system and largely leave it scientist to reduce data movement. Over the past decades the high-end computing community has adopted middleware with multiple layers of abstractions and specialized file formats such as NetCDF-4 and HDF5. These abstractions provide a limited set of high-level data processing functions, but have inherent functionality and performance limitations: middleware that provides access to the highly structured contents of scientific data files stored in the (unstructured) file systems can only optimize to the extent that file system interfaces permit; the highly structured formats of these files often impedes native file system performance optimizations. We are developing Damasc, an enhanced high-performance file system with native rich data management services. Damasc will enable efficient queries and updates over files stored in their native byte-stream format while retaining the inherent performance of file system data storage via declarative queries and updates over views of underlying files. Damasc has four key benefits for the development of data-intensive scientific code: (1) applications can use important data-management services, such as declarative queries, views, and provenance tracking, that are currently available only within database systems; (2) the use of these services becomes easier, as they are provided within a familiar file

  14. Understanding the length dependence of molecular junction thermopower

    SciTech Connect (OSTI)

    Karlström, Olov; Strange, Mikkel; Solomon, Gemma C.

    2014-01-28

    Thermopower of molecular junctions is sensitive to details in the junction and may increase, decrease, or saturate with increasing chain length, depending on the system. Using McConnell's theory for exponentially suppressed transport together with a simple and easily interpretable tight binding model, we show how these different behaviors depend on the molecular backbone and its binding to the contacts. We distinguish between resonances from binding groups or undercoordinated electrode atoms, and those from the periodic backbone. It is demonstrated that while the former gives a length-independent contribution to the thermopower, possibly changing its sign, the latter determines its length dependence. This means that the question of which orbitals from the periodic chain that dominate the transport should not be inferred from the sign of the thermopower but from its length dependence. We find that the same molecular backbone can, in principle, show four qualitatively different thermopower trends depending on the binding group: It can be positive or negative for short chains, and it can either increase or decrease with length.

  15. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services The Office of Indian Energy coordinates and manages the government-to-government and intertribal collaboration involved in carrying out all DOE tribal ...

  16. Air Charter Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    301-10.143) promulgated by the General Services Administration (GSA) which implements ... that allow federal funded transportation services for travel and cargo movements to use ...

  17. Service-Poke

    SciTech Connect (OSTI)

    Kevin Fox, PNNL

    2012-02-10

    Service-Poke is a system which manages running services ensuring only one copy is running and potentially up to one more copy is marked for future execution.

  18. UGIES Midstream Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    UGI Energy Services, LLC pterranova@ugies.com UGI Corporation UGI Energy Services, LLC. 2 UGI Corporation Domestic Propane International Propane Midstream & Marketing Regulated ...

  19. Dual Career Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Options Dual Career Services Dual Career Services Los Alamos Lab recruits the best minds on the planet and offers job search information and assistance to our dual career...

  20. Senior Executive Service | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Senior Executive Service

  1. Extended length microchannels for high density high throughput electrophoresis systems

    DOE Patents [OSTI]

    Davidson, James C.; Balch, Joseph W.

    2000-01-01

    High throughput electrophoresis systems which provide extended well-to-read distances on smaller substrates, thus compacting the overall systems. The electrophoresis systems utilize a high density array of microchannels for electrophoresis analysis with extended read lengths. The microchannel geometry can be used individually or in conjunction to increase the effective length of a separation channel while minimally impacting the packing density of channels. One embodiment uses sinusoidal microchannels, while another embodiment uses plural microchannels interconnected by a via. The extended channel systems can be applied to virtually any type of channel confined chromatography.

  2. National Service Activation Checklist

    Office of Energy Efficiency and Renewable Energy (EERE)

    Uniformed Services Employment and Reemployment Rights Act Career, Seniority, Pay, and Benefits information

  3. Spinorial relativistic particle in the presence of a minimal length

    SciTech Connect (OSTI)

    Zeroual, F.; Merad, M.

    2012-06-27

    We study the (1 + 3) -dimensional Dirac equation of a particle under the action of a uniform E.M. field and in the presence of a minimal length of the energy-momentum space. The high-temperature thermodynamic properties are obtained.

  4. Progress in Long Scale Length Laser-Plasma Interactions

    SciTech Connect (OSTI)

    Glenzer, S H; Arnold, P; Bardsley, G; Berger, R L; Bonanno, G; Borger, T; Bower, D E; Bowers, M; Bryant, R; Buckman, S; Burkhart, S C; Campbell, K; Chrisp, M P; Cohen, B I; Constantin, G; Cooper, F; Cox, J; Dewald, E; Divol, L; Dixit, S; Duncan, J; Eder, D; Edwards, J; Erbert, G; Felker, B; Fornes, J; Frieders, G; Froula, D H; Gardner, S D; Gates, C; Gonzalez, M; Grace, S; Gregori, G; Greenwood, A; Griffith, R; Hall, T; Hammel, B A; Haynam, C; Heestand, G; Henesian, M; Hermes, G; Hinkel, D; Holder, J; Holdner, F; Holtmeier, G; Hsing, W; Huber, S; James, T; Johnson, S; Jones, O S; Kalantar, D; Kamperschroer, J H; Kauffman, R; Kelleher, T; Knight, J; Kirkwood, R K; Kruer, W L; Labiak, W; Landen, O L; Langdon, A B; Langer, S; Latray, D; Lee, A; Lee, F D; Lund, D; MacGowan, B; Marshall, S; McBride, J; McCarville, T; McGrew, L; Mackinnon, A J; Mahavandi, S; Manes, K; Marshall, C; Mertens, E; Meezan, N; Miller, G; Montelongo, S; Moody, J D; Moses, E; Munro, D; Murray, J; Neumann, J; Newton, M; Ng, E; Niemann, C; Nikitin, A; Opsahl, P; Padilla, E; Parham, T; Parrish, G; Petty, C; Polk, M; Powell, C; Reinbachs, I; Rekow, V; Rinnert, R; Riordan, B; Rhodes, M

    2003-11-11

    The first experiments on the National Ignition Facility (NIF) have employed the first four beams to measure propagation and laser backscattering losses in large ignition-size plasmas. Gas-filled targets between 2 mm and 7 mm length have been heated from one side by overlapping the focal spots of the four beams from one quad operated at 351 nm (3{omega}) with a total intensity of 2 x 10{sup 15} W cm{sup -2}. The targets were filled with 1 atm of CO{sub 2} producing of up to 7 mm long homogeneously heated plasmas with densities of n{sub e} = 6 x 10{sup 20} cm{sup -3} and temperatures of T{sub e} = 2 keV. The high energy in a NIF quad of beams of 16kJ, illuminating the target from one direction, creates unique conditions for the study of laser plasma interactions at scale lengths not previously accessible. The propagation through the large-scale plasma was measured with a gated x-ray imager that was filtered for 3.5 keV x rays. These data indicate that the beams interact with the full length of this ignition-scale plasma during the last {approx}1 ns of the experiment. During that time, the full aperture measurements of the stimulated Brillouin scattering and stimulated Raman scattering show scattering into the four focusing lenses of 6% for the smallest length ({approx}2 mm). increasing to 12% for {approx}7 mm. These results demonstrate the NIF experimental capabilities and further provide a benchmark for three-dimensional modeling of the laser-plasma interactions at ignition-size scale lengths.

  5. Business Services | Jefferson Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Business Services Jefferson Lab spends approximately $73 million annually through procurements to a diverse group of large and small businesses for a broad range of products and services that support the lab's overall mission. Managing the lab's vendor process is the Procurement & Services Department. The department is dedicated to the highest standards of service, conduct and continuous improvement. To learn more about business opportunities with the lab, contact Procurement & Services.

  6. MOX Services Unclassified Information System PIA, National Nuclear Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Administration | Department of Energy MOX Services Unclassified Information System PIA, National Nuclear Services Administration MOX Services Unclassified Information System PIA, National Nuclear Services Administration MOX Services Unclassified Information System PIA, National Nuclear Services Administration MOX Services Unclassified Information System PIA, National Nuclear Services Administration (378.48 KB) More Documents & Publications TRAIN-PIA.pdf Occupational Medicine - Assistant

  7. Inherent structure length in metallic glasses: Simplicity behind complexity

    DOE PAGES-Beta [OSTI]

    Wu, Yuan; Wang, Hui; Cheng, Yongqiang; Liu, Xiongjun; Hui, Xidong; Nieh, Taigang; Wang, Yandong; Lu, Zhaoping

    2015-08-06

    One of the central themes in materials science is the structure-property relationship. In conventional crystalline metals, their mechanical behaviour is often dictated by well-defined structural defects such as dislocations, impurities, and twins. However, the structure-property relationship in amorphous alloys is far from being understood, due to great difficulties in characterizing and describing the disordered atomic-level structure. Here, we report a universal, yet simple, correlation between the macroscopic mechanical properties (i.e., yield strength and shear modulus) and a unique characteristic structural length in metallic glasses (MGs). Lastly, our analysis indicates that this characteristic length can incorporate effects of both the inter-atomicmore » distance and valence electron density in MGs, and result in the observed universal correlation. The current findings shed lights on the basic understanding of mechanical properties of MGs from their disordered atomic structures.« less

  8. Inherent structure length in metallic glasses: Simplicity behind complexity

    SciTech Connect (OSTI)

    Wu, Yuan; Wang, Hui; Cheng, Yongqiang; Liu, Xiongjun; Hui, Xidong; Nieh, Taigang; Wang, Yandong; Lu, Zhaoping

    2015-08-06

    One of the central themes in materials science is the structure-property relationship. In conventional crystalline metals, their mechanical behaviour is often dictated by well-defined structural defects such as dislocations, impurities, and twins. However, the structure-property relationship in amorphous alloys is far from being understood, due to great difficulties in characterizing and describing the disordered atomic-level structure. Here, we report a universal, yet simple, correlation between the macroscopic mechanical properties (i.e., yield strength and shear modulus) and a unique characteristic structural length in metallic glasses (MGs). Lastly, our analysis indicates that this characteristic length can incorporate effects of both the inter-atomic distance and valence electron density in MGs, and result in the observed universal correlation. The current findings shed lights on the basic understanding of mechanical properties of MGs from their disordered atomic structures.

  9. Real time bunch length measurements in the SLC linac

    SciTech Connect (OSTI)

    Sheppard, J.C.; Clendenin, J.E.; James, M.B.; Miller, R.H.; Ross, M.C.

    1985-02-01

    The longitudinal charge distribution of bunches accelerated in the Stanford Linear Collider (SLC) linac will strongly affect the performance of the Collider. Bunch lengths are chosen in a balance between the deleterious effects of longitudinal and transverse wakefields. The former impacts on the beam energy spread whereas the latter is important to the transverse emittance. Two bunch length measurement ports have been installed in the SLC linac: one in the injector region and one after the emittance damping ring to linac reinjection point. These ports utilize a fused quartz Cerenkov radiator in conjunction with an electrooptic streak camera to permit real time monitoring of single s-band buckets with a resolution of several picoseconds. The design of the radiators and light collection optics is discussed with an emphasis on those issues important to high resolution. Experimental results are presented. 7 refs., 4 figs.

  10. Impact of Backbone Tether Length and Structure on the Electrochemical

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Performance of Viologen RAPs - Joint Center for Energy Storage Research 30, 2016, Research Highlights Impact of Backbone Tether Length and Structure on the Electrochemical Performance of Viologen RAPs Generalized schematic that explains how we used a systematic molecular design approach to investigate the impact of linker and redox-pendant electronic interactions on the performance of viologen RAPs. Scientific Achievement Fundamental inter-valence interactions are used as starting point for

  11. Structuring Materials on Multiple Length Scales for Energy Applications |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    MIT-Harvard Center for Excitonics Structuring Materials on Multiple Length Scales for Energy Applications October 25, 2012 at 3pm/36-428 Adreas Stein Department of Chemistry, University of Minnesota astein Abstract: Nanoporous and nanostructured materials are becoming increasingly important for advanced applications, including energy storage and conversion materials. Templating methods based on hard templates (colloidal crystal templating, nanocasting) and soft templates (surfactant systems)

  12. Food Service Buildings

    U.S. Energy Information Administration (EIA) (indexed site)

    was a food service building were only asked whether the building was a restaurant, bar, fast food chain, or cafeteria (all the same category) or some other type of food service...

  13. NERSC FTP Upload Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    NERSC FTP Upload Service The NERSC FTP Upload service is designed for external collaborators to be able to send data to NERSC staff and users. It allows you to create a...

  14. Proceedings of the XXVI SLAC Summer Institute on Particle Physics: Gravity from the Hubble Length to the Planck Length

    SciTech Connect (OSTI)

    Deporcel, Lilian

    2001-04-02

    The XXVI SLAC Summer Institute on Particle Physics was held from August 3 to August 14, 1998. The topic, ''Gravity--from the Hubble Length to the Planck Length,'' brought together 179 physicists from 13 countries. The lectures in this volume cover the seven-day school portion of the Institute, which took us from the largest scales of the cosmos, to the Planck length at which gravity might be unified with the other forces of nature. Lectures by Robert Wagoner, Clifford Will, and Lynn Cominsky explored the embedding of gravity into general relativity and the confrontation of this idea with experiments in the laboratory and astrophysical settings. Avishai Deckel discussed observations and implications of the large-scale structure of the universe, and Tony Tyson presented the gravitational lensing effect and its use in the ongoing search for signatures of the unseen matter of the cosmos. The hunt for the wave nature of gravity was presented by Sam Finn and Peter Saulson, and Joe Polchinski showed us what gravity might look like in the quantum limit at the Planck scale. The lectures were followed by afternoon discussion sessions, where students could further pursue questions and topics with the day's lecturers. The Institute concluded with a three-day topical conference covering recent developments in theory and experiment from around the world of elementary particle physics and cosmology; its proceedings are also presented in this volume.

  15. Simple Lookup Service

    Energy Science and Technology Software Center (OSTI)

    2013-05-01

    Simple Lookup Service (sLS) is a REST/JSON based lookup service that allows users to publish information in the form of key-value pairs and search for the published information. The lookup service supports both pull and push model. This software can be used to create a distributed architecture/cloud.

  16. Analytical Services - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contracting Wastren Advantage, Inc. Analytical Services Contracting ORP Contracts and Procurements RL Contracts and Procurements CH2M HILL Plateau Remediation Company Mission Support Alliance Washington Closure Hanford HPM Corporation (HPMC) Wastren Advantage, Inc. Analytical Services HASQARD Focus Group Bechtel National, Inc. Washington River Protection Solutions Analytical Services Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Analytical laboratory analyses

  17. Mail Services User's Guide

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-03

    This Guide provides information on using Department of Energy (DOE) mail services in accordance with U.S. Postal Service, General Services Administration (GSA), and DOE regulations. Cancels DOE M 573.1-1. Canceled by DOE N 251.89.

  18. Varying properties along lengths of temperature limited heaters

    SciTech Connect (OSTI)

    Vinegar, Harold J.; Xie, Xueying; Miller, David Scott; Ginestra, Jean Charles

    2011-07-26

    A system for heating a subsurface formation is described. The system includes an elongated heater in an opening in the formation. The elongated heater includes two or more portions along the length of the heater that have different power outputs. At least one portion of the elongated heater includes at least one temperature limited portion with at least one selected temperature at which the portion provides a reduced heat output. The heater is configured to provide heat to the formation with the different power outputs. The heater is configured so that the heater heats one or more portions of the formation at one or more selected heating rates.

  19. Minimum length, extra dimensions, modified gravity and black hole remnants

    SciTech Connect (OSTI)

    Maziashvili, Michael

    2013-03-01

    We construct a Hilbert space representation of minimum-length deformed uncertainty relation in presence of extra dimensions. Following this construction, we study corrections to the gravitational potential (back reaction on gravity) with the use of correspondingly modified propagator in presence of two (spatial) extra dimensions. Interestingly enough, for r?0 the gravitational force approaches zero and the horizon for modified Schwarzschild-Tangherlini space-time disappears when the mass approaches quantum-gravity energy scale. This result points out to the existence of zero-temperature black hole remnants in ADD brane-world model.

  20. A noninvasive bunch length monitor for femtosecond electron bunches

    SciTech Connect (OSTI)

    Wang, D.X.; Kraft, G.A.; Price, E.; Wood, P.A.; Porterfield, D.W.; Crowe, T.W.

    1997-01-01

    A bunch length monitor for ultrashort (90 fs to 1 ps) electron bunches using a coherent synchrotron radiation detection techniques has been developed in a collaboration between the Thomas Jefferson National accelerator Facility (Jefferson Lab) and the University of Virginia. The noninvasive, high-resolution, high-sensitivity, low-noise monitor employs a state-of-the-art {open_quotes}bandpass{close_quotes} GaAs Schottky whisker diode operated at room temperature. This letter presents the monitor{close_quote}s performance. {copyright} {ital 1997 American Institute of Physics.}

  1. Crystal Structure of a Full-Length Hammerhead Ribozyme

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Elusive Active Fold of a Catalytic RNA: A Crystal Structure of a Full-Length Hammerhead Monika Martick1,2 and William G. Scott1,3,* The Center for the Molecular Biology of RNA1, the Department of Molecular, Cellular and Developmental Biology2, and the Department of Chemistry and Biochemistry3, Robert L. Sinsheimer Laboratories, University of California, Santa Cruz, Santa Cruz, CA 95064, USA *Contact: wgscott AT chemistry.ucsc.edu Since the discovery that RNA can be an enzyme, a fundamental

  2. Marine Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Marine Services Place: Florida Sector: Services Product: Marine Services is planning tidal energy projects off the coasts of California and Florida. References: Marine...

  3. Dabbrook Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Jump to: navigation, search Name: Dabbrook Services Place: Great Yarmouth, United Kingdom Zip: NR31 6PT Sector: Services Product: Provides design and engineering...

  4. Length Scale Selects Directionality of Droplets on Vibrating Pillar Ratchet

    SciTech Connect (OSTI)

    Agapov, Rebecca L.; Boreyko, Jonathan B.; Briggs, Dayrl P.; Srijanto, Bernadeta R.; Retterer, Scott T.; Collier, Pat; Lavrik, Nickolay V.

    2014-09-22

    Directional control of droplet motion at room temperature is of interest for applications such as microfluidic devices, self-cleaning coatings, and directional adhesives. Here, arrays of tilted pillars ranging in height from the nanoscale to the microscale are used as structural ratchets to directionally transport water at room temperature. Water droplets deposited on vibrating chips with a nanostructured ratchet move preferentially in the direction of the feature tilt while the opposite directionality is observed in the case of microstructured ratchets. This remarkable switch in directionality is consistent with changes in the contact angle hysteresis. To glean further insights into the length scale dependent asymmetric contact angle hysteresis, the contact lines formed by a nonvolatile room temperature ionic liquid placed onto the tilted pillar arrays were visualized and analyzed in situ in a scanning electron microscope. The ability to tune droplet directionality by merely changing the length scale of surface features all etched at the same tilt angle would be a versatile tool for manipulating multiphase flows and for selecting droplet directionality in other lap-on-chip applications.

  5. Restriction fragment length polymorphisms associated with substance P gene

    SciTech Connect (OSTI)

    de Miguel, C.; Bonner, T.; Detera-Wadleigh, S.

    1987-05-01

    Substance P (SP) is an important neuropepetide detected in a variety of locations in the central nervous system. Variations in SP content or SP receptors in psychiatric disorders have been described. Using SP clones as probes the authors have found three restriction fragment length polymorphisms (RFLPs) in the SP gene. The RFLPs are generated by digestion of genomic DNA with the MspI, and RsaI and NcoI restriction endonucleases. The MspI RFLP is detected by two genomic clones mapping to the 5' end of the gene while the RsaI and NcoI rFLPs are both detected by two genomic clones on the 3' end and also by a full-length cDNA clone of the gene. All three RFLPs are characterized by two alleles. For the MspI RFLP the frequency of both alleles is similar, for the Rsa I and NcoI RFLP one of the alleles is significantly more abundant than the other. These RFLPs are now being used to determine whether any of the alleles correlate with either schizophrenia or affective disorder.

  6. Probing the Conformational Distributions of Sub-Persistence Length DNA

    SciTech Connect (OSTI)

    Mastroianni, Alexander; Sivak, David; Geissler, Phillip; Alivisatos, Paul

    2009-06-08

    We have measured the bending elasticity of short double-stranded DNA (dsDNA) chains through small-angle X-ray scattering from solutions of dsDNA-linked dimers of gold nanoparticles. This method, which does not require exertion of external forces or binding to a substrate, reports on the equilibrium distribution of bending fluctuations, not just an average value (as in ensemble FRET) or an extreme value (as in cyclization), and in principle provides a more robust data set for assessing the suitability of theoretical models. Our experimental results for dsDNA comprising 42-94 basepairs (bp) are consistent with a simple worm-like chain model of dsDNA elasticity, whose behavior we have determined from Monte Carlo simulations that explicitly represent nanoparticles and their alkane tethers. A persistence length of 50 nm (150 bp) gave a favorable comparison, consistent with the results of single-molecule force-extension experiments on much longer dsDNA chains, but in contrast to recent suggestions of enhanced flexibility at these length scales.

  7. The differnces between bond lengths in biogenic and geologocal calcite.

    SciTech Connect (OSTI)

    Zlotoyabko, E.; Caspi, E. N.; Fieramosca, J. S.; Von Dreele, R. B.; Marin, F.; Mor, G.; Politi, Y.; Addadi, L.; Weiner, S.

    2010-01-01

    We used high-resolution neutron powder diffraction to accurately measure the atomic positions and bond lengths in biogenic and geological calcite. A special procedure for data analysis was developed in order to take into account the considerable amounts of magnesium present in all the investigated samples. As a result, in biogenic calcite we found some atomic bonds to have significantly different lengths as compared to those in geological calcite, after the contribution of magnesium is accounted for. The maximum effect (elongation up to 0.7%) was found for the C-O bonds. We also analyzed changes in frequencies and spectral widths of normal vibrations of carbonate groups in biogenic calcite (as compared to geological calcite) measured by Raman and Fourier transform IR techniques. Surprisingly, the frequency shifts after subtracting the magnesium contribution are close to zero. At the same time, substantial spectral broadening (up to 1.2%) in biogenic calcite as compared to geological samples was detected. Possible explanations for the experimental findings are discussed.

  8. BNL Technical Services Awarded Service-Disabled Veteran-Owned...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year ...

  9. Office of Headquarters Procurement Services - Employee Customer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office of Headquarters Procurement Services - Employee Customer Service Standards Office of Headquarters Procurement Services - Employee Customer Service Standards CUSTOMER FOCUS ...

  10. Competition & Correlation Among Length Scales: Mesostructure & Mechanical

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Compensation/Awards Compensation/Awards Pay, Leave, Absence November 17, 2014 HQ Voluntary Leave Transfer Program Find out how you can apply, based on a medical emergency, to receive annual leave donated by other employees. September 3, 2013 Waiver of the Bi-Weekly Pay L:imitation for Emergency Response Activities Heads of Departmental elements, with the concurrence of their servicing Human Resources staff, are authorized to waive the bi-weekly pay limitation for employees engaged in emergency

  11. Unbundling electricity: Ancillary services

    SciTech Connect (OSTI)

    Kirby, B.; Hirst, E.

    1996-06-01

    The US electricity industry, dominated by vertically integrated, retail-monopoly, regulated utilities, is undergoing enormous changes. The industry, within the next few years, will evolve into a deintegrated, competitive-market dominated, less regulated industry. Part of this process involves unbundling electric generation from transmission, which raises the issue of ancillary services. Since the Federal Energy Regulatory Commission (FERC) published its March 1995 proposed rule on open-access transmission, ancillary services have been an important topic. Ancillary services are those functions performed by the equipment and people that generate, control, transmit, and distribute electricity to support the basic services of generating capacity, energy supply, and power delivery. These services cost US electricity consumers about $12 billion a year. This article examines the functions performed by the equipment and people that generate, control, transmit, and distribute electricity to support the basic services of generating capacity, energy supply, and power delivery.

  12. Web Service Interface (API)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Interface (API) Engineering Services The Network OSCARS How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) Read More... Fasterdata IPv6 Network Network Performance Tools The ESnet Engineering Team Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  13. Customer Service Plan

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Customer Service Plan Department of Energy Customer Service Plan - 2011 1 A Message from the Secretary Over the past two and a half years, the Obama Administration and the Department of Energy have worked to make the federal government more open for the American public and its own employees. Through these efforts, we have significantly expanded the amount and breadth of information available online about our programs and services. We have also transformed the way we communicate with the public

  14. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services Image courtesy of Dennis Schroeder, NREL 24505 Image courtesy of Dennis Schroeder, NREL 24505 The Office of Energy Efficiency and Renewable Energy (EERE) leads DOE efforts to build a strong, clean energy economy, a strategy that is aimed at reducing our reliance on foreign oil, saving families and businesses money, creating middle-class jobs, and reducing pollution. EERE offers the following resources and services: Key Topics: Energy Basics States and Local Communities Jobs,

  15. Light absorption cell combining variable path and length pump

    DOE Patents [OSTI]

    Prather, William S.

    1993-01-01

    A device for use in making spectrophotometric measurements of fluid samples. In particular, the device is a measurement cell containing a movable and a fixed lens with a sample of the fluid therebetween and through which light shines. The cell is connected to a source of light and a spectrophotometer via optic fibers. Movement of the lens varies the path length and also pumps the fluid into and out of the cell. Unidirectional inlet and exit valves cooperate with the movable lens to assure a one-way flow of fluid through the cell. A linear stepper motor controls the movement of the lens and cycles it from a first position closer to the fixed lens and a second position farther from the fixed lens, preferably at least 10 times per minute for a nearly continuous stream of absorption spectrum data.

  16. Analysis and Optimization of "Full-Length" Diodes

    SciTech Connect (OSTI)

    Schock, Alfred

    2012-01-19

    A method of analyzing the axial variation of the heat generation rate, temperature, voltage, current density and emitter heat flux in a thermionic converter is described. The method is particularly useful for the case of "long" diodes, each extending over the full length of the reactor core. For a given diode geometry and fuel distribution, the analysis combines a nuclear solution of the axial fission density profile with the iterative solution of four differential equations representing the thermal, electrical, and thermionic interactions within the diode. The digital computer program developed to solve these equations can also perform a design optimization with respect to lead resistance, load voltage, and emitter thickness, for a specified maximum emitter temperature. Typical results are presented, and the use of this analysis for predicting the diode operating characteristics is illustrated.

  17. Light absorption cell combining variable path and length pump

    DOE Patents [OSTI]

    Prather, W.S.

    1993-12-07

    A device is described for use in making spectrophotometric measurements of fluid samples. In particular, the device is a measurement cell containing a movable and a fixed lens with a sample of the fluid there between and through which light shines. The cell is connected to a source of light and a spectrophotometer via optic fibers. Movement of the lens varies the path length and also pumps the fluid into and out of the cell. Unidirectional inlet and exit valves cooperate with the movable lens to assure a one-way flow of fluid through the cell. A linear stepper motor controls the movement of the lens and cycles it from a first position closer to the fixed lens and a second position farther from the fixed lens, preferably at least 10 times per minute for a nearly continuous stream of absorption spectrum data. 2 figures.

  18. General Service LED Lamps

    SciTech Connect (OSTI)

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  19. Energy Service Companies

    Energy.gov [DOE]

    Energy service companies (ESCOs) develop, design, build, and fund projects that save energy, reduce energy costs, decrease operations and maintenance costs at their customers' facilities.

  20. Service and Repair Work

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Jupiter Laser Facility, please contact Sean Holte (2-3905, pager 05312). Notify Brent Stuart and Beth Mariotti whenever you bring a visitor to inspect, service, or repair...

  1. Procurable Products, Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    printed wiring boards (PWB) using performance and design specifications. Commercial products and services procurement The following items are purchased through Just-In-Time...

  2. Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Building Types 1 References EIA CBECS Building Types U.S. Energy Information Administration (Oct 2008) Retrieved from "http:en.openei.orgwindex.php?titleService&oldid27...

  3. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services The Oak Ridge Office of Environmental Management has numerous and diverse responsibilities. Our ultimate mission is to remove environmental contamination to improve safety ...

  4. ORISE: Health physics services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Health physics services Nuclear power plant The Oak Ridge Institute for Science and ... Nuclear power plant Dose modeling and sssessments We perform dose modeling and assessment ...

  5. BPA Power Services (PBL)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Executives Hydro Power 2010 Modified Streamflows BPA Fuel Mix Site Map Other Related Web Sites: BPA Energy Efficiency (EE) BPA Transmission Services BPA Environment, Fish, &...

  6. Services | Department of Energy

    Office of Environmental Management (EM)

    The Resource Center consolidates and provides access to key tools and services for accomplishing this objective. The target audience is DOE's Federal and Contractor Project ...

  7. General Service LED Lamps

    Energy.gov [DOE]

    A U.S. DOE SSL technology fact sheet that compares general service LED light bulbs with incandescent and CFL bulbs.

  8. Products, Services: Not Procurable

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Furrier Physicians Amusements Gaming Produce ArtArtists Gift Shops Public Relations Art Galleries Glass Company Recreation Arts & Crafts GrocersGroceries Relocation Services...

  9. Mail Services User's Manual

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-07-12

    This Manual provides detailed information on using the Department of Energy (DOE) mail services. Canceled by DOE G 573.1-1.

  10. INTEGRATED VERTICAL AND OVERHEAD DECONTAMINATION (IVOD) SYSTEM

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    2001-01-01

    The deactivation and decommissioning of 1200 buildings within the U.S. Department of Energy-Office of Environmental Management complex will require the disposition of a large quantity of contaminated concrete and metal surfaces. It has been estimated that 23 million cubic meters of concrete and over 600,000 tons of metal will need disposition. The disposition of such large quantities of material presents difficulties in the area of decontamination and characterization. The final disposition of this large amount of material will take time and money as well as risk to the D&D work force. A single automated system that would decontaminate and characterize surfaces in one step would not only reduce the schedule and decrease cost during D&D operations but would also protect the D&D workers from unnecessary exposures to contaminated surfaces. This report summarizes the activities performed during FY00 and describes the planned activities for FY01. Accomplishments for FY00 include the following: Development and field-testing of characterization system; Completion of Title III design of deployment platform and decontamination unit; In-house testing of deployment platform and decontamination unit; Completion of system integration design; Identification of deployment site; and Completion of test plan document for deployment of IVOD at Rancho Seco nuclear power facility.

  11. Length scale selects directionality of droplets on vibrating pillar ratchet

    DOE PAGES-Beta [OSTI]

    Agapov, Rebecca L.; Boreyko, Jonathan B.; Briggs, Dayrl P.; Srijanto, Bernadeta R.; Retterer, Scott T.; Collier, C. Patrick; Lavrik, Nickolay V.

    2014-09-22

    Directional control of droplet motion at room temperature is of interest for applications such as microfluidic devices, self-cleaning coatings, and directional adhesives. Here, arrays of tilted pillars ranging in height from the nanoscale to the microscale are used as structural ratchets to directionally transport water at room temperature. Water droplets deposited on vibrating chips with a nanostructured ratchet move preferentially in the direction of the feature tilt while the opposite directionality is observed in the case of microstructured ratchets. This remarkable switch in directionality is consistent with changes in the contact angle hysteresis. To glean further insights into the lengthmore » scale dependent asymmetric contact angle hysteresis, the contact lines formed by a nonvolatile room temperature ionic liquid placed onto the tilted pillar arrays were visualized and analyzed in situ in a scanning electron microscope. As a result, the ability to tune droplet directionality by merely changing the length scale of surface features all etched at the same tilt angle would be a versatile tool for manipulating multiphase flows and for selecting droplet directionality in other lap-on-chip applications.« less

  12. Thermal management of long-length HTS cable systems

    SciTech Connect (OSTI)

    Demko, Jonathan A; Hassenzahl, William V

    2011-01-01

    Projections of electric power production suggest a major shift to renewables, such as wind and solar, which will be in remote locations where massive quantities of power are available. One solution for transmitting this power over long distances to load centers is direct current (dc), high temperature superconducting (HTS) cables. Electric transmission via dc cables promises to be effective because of the low-loss, highcurrent- carrying capability of HTS wire at cryogenic temperatures. However, the thermal management system for the cable must be carefully designed to achieve reliable and energyefficient operation. Here we extend the analysis of a superconducting dc cable concept proposed by the Electric Power Research Institute (EPRI), which has one stream of liquid nitrogen flowing in a cryogenic enclosure that includes the power cable, and a separate return tube for the nitrogen. Refrigeration stations positioned every 10 to 20 km cool both nitrogen streams. Both go and return lines are contained in a single vacuum/cryogenic envelope. Other coolants, including gaseous helium and gaseous hydrogen, could provide potential advantages, though they bring some technical challenges to the operation of long-length HTS dc cable systems. A discussion of the heat produced in superconducting cables and a system to remove the heat are discussed. Also, an analysis of the use of various cryogenic fluids in long-distance HTS power cables is presented.

  13. Decreasing transmembrane segment length greatly decreases perfringolysin O pore size

    DOE PAGES-Beta [OSTI]

    Lin, Qingqing; Li, Huilin; Wang, Tong; London, Erwin

    2015-04-08

    Perfringolysin O (PFO) is a transmembrane (TM) β-barrel protein that inserts into mammalian cell membranes. Once inserted into membranes, PFO assembles into pore-forming oligomers containing 30–50 PFO monomers. These form a pore of up to 300 Å, far exceeding the size of most other proteinaceous pores. In this study, we found that altering PFO TM segment length can alter the size of PFO pores. A PFO mutant with lengthened TM segments oligomerized to a similar extent as wild-type PFO, and exhibited pore-forming activity and a pore size very similar to wild-type PFO as measured by electron microscopy and a leakagemore » assay. In contrast, PFO with shortened TM segments exhibited a large reduction in pore-forming activity and pore size. This suggests that the interaction between TM segments can greatly affect the size of pores formed by TM β-barrel proteins. PFO may be a promising candidate for engineering pore size for various applications.« less

  14. Decreasing transmembrane segment length greatly decreases perfringolysin O pore size

    SciTech Connect (OSTI)

    Lin, Qingqing; Li, Huilin; Wang, Tong; London, Erwin

    2015-04-08

    Perfringolysin O (PFO) is a transmembrane (TM) β-barrel protein that inserts into mammalian cell membranes. Once inserted into membranes, PFO assembles into pore-forming oligomers containing 30–50 PFO monomers. These form a pore of up to 300 Å, far exceeding the size of most other proteinaceous pores. In this study, we found that altering PFO TM segment length can alter the size of PFO pores. A PFO mutant with lengthened TM segments oligomerized to a similar extent as wild-type PFO, and exhibited pore-forming activity and a pore size very similar to wild-type PFO as measured by electron microscopy and a leakage assay. In contrast, PFO with shortened TM segments exhibited a large reduction in pore-forming activity and pore size. This suggests that the interaction between TM segments can greatly affect the size of pores formed by TM β-barrel proteins. PFO may be a promising candidate for engineering pore size for various applications.

  15. Fact #728: May 21, 2012 Average Trip Length is Less Than Ten Miles

    Energy.gov [DOE]

    The average trip length (one-way) is 9.7 miles according to the 2009 Nationwide Personal Transportation Survey. Trip lengths vary by the purpose of the trip. Shopping and family/personal business...

  16. Property:Length of Effective Tow(m) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    of Effective Tow(m) Jump to: navigation, search Property Name Length of Effective Tow(m) Property Type String Pages using the property "Length of Effective Tow(m)" Showing 20 pages...

  17. Full-length Gαq-phospholipase C-β3 structure reveals interfaces...

    Office of Scientific and Technical Information (OSTI)

    Full-length Gq-phospholipase C-3 structure reveals interfaces of the C-terminal coiled-coil domain Citation Details In-Document Search Title: Full-length Gq-phospholipase ...

  18. Utility Service Renovations

    Energy.gov [DOE]

    Any upgrade to utility service provides an opportunity to revisit a Federal building's electrical loads and costs, but it also may provide an economic way to bundle the upgrade with an onsite renewable electricity project during renovation. Upgrading utility service to the site may involve improving or adding a transformer, upgrading utility meters, or otherwise modifying the interconnection equipment or services with the utility. In some cases, the upgrade may change the tariff structure for the facility and may qualify the property for a different structure with lower overall costs. In all cases, the implementation of renewable energy technologies should be identified during the design phase.

  19. Remotely serviced filter and housing

    DOE Patents [OSTI]

    Ross, Maurice J.; Zaladonis, Larry A.

    1988-09-27

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge using an overhead crane. The filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station.

  20. Web Service Interface (API)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Web Browser Interface (WBUI) Web Service Interface (API) Read More... Fasterdata IPv6 ... Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 ...

  1. Web service performance script

    Energy Science and Technology Software Center (OSTI)

    2009-08-01

    This python script, available from ESRI and modified here, checks a server at specified intervals to ensure that web services remain up and running. If any are found to be off, they are automatically turned back on.

  2. Web Feature Service Validator

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    This site allows state data contributors to validate their WFS services against a specified schema for tier 3 data. The application uses the USGIN models API at https://github.com/usgin/usginmodels.

  3. Services | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Services Initiatives Services Initiatives The Transportation Team Uses Alternative Fueled Vehicles in HQ Fleet 81% of HQ Fleet is alternative fueled (FY 2014). HQ utilizes biodiesel (B20) fueled shuttle buses, a domestic renewable fuel derived from natural oils like soybean oil. Recycled Paper for Copiers and Printers DOE Headquarters purchases a combination of 30% and 100% post-consumer recycled content paper for use in its staffed copy centers, walk-up copiers, and dedicated office printers

  4. Service Academies Research Associates

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Internships » SARA Service Academies Research Associates Military academies come to Los Alamos for a summer of science. October 9, 2015 West Point cadets at the National Security Science Building at Los Alamos National Laboratory. West Point cadets at the National Security Science Building at Los Alamos National Laboratory. Contact Jonathan S. Ventura Email SARA interns use science and engineering to meet challenges to national security. SARA: not what you'd expect Through the Service Academies

  5. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services The Office of International Affairs supports the Secretary of Energy and other Departmental elements with a range of expertise on international energy activities. Among other areas, IA experts maintain extensive knowledge of the following issues: International Energy Policy Regional and country-specific energy policies and practices, technology developments, and market conditions in Africa, the Americas, Asia, Europe, Eurasia, and the Middle East Bilateral and multilateral

  6. ORISE: Health physics services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Health physics services Nuclear power plant The Oak Ridge Institute for Science and Education (ORISE) offers comprehensive health physics services in a number of technical areas for the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), as well as other federal and state agencies. From radiological facility audits and reviews to dose modeling and technical evaluations, ORISE is nationally-recognized for its health physics support to decontamination and decommissioning

  7. Test Circuit Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Test Circuit Service Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds 100G SDN Testbed Dark Fiber Testbed Test Circuit Service Testbed Results Current Testbed Research Previous Testbed Research Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network

  8. In-Office Services:

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Office Services: Meet with an experienced attorney who can advise and represent you. Attorney Services include: * Reviewing and preparing documents * Making follow-up calls and writing letters * Providing legal advice and consultation * Representation in court Comprehensive Coverage protects you from costly legal fees. Most covered legal matters are 100% paid-in-full when you work with a Network Attorney. (See reverse side of flyer for details.) Reduced Fee Benefits are available for matters not

  9. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services Secretary Ernest Moniz takes a holistic view to diversity, recognizing that the goal of ensuring equal access to participation in the Department's programs and policies comes through in our workforce, our partners, our research, our policies, our education efforts, and our work with the general public. We invite you to browse our website to learn more about the ways we'd like to work with you to support the mission of the Energy Department. Minority Business and Economic

  10. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Services Office of Inspector General Hotline: The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. If you wish to report such allegations, you may call, send a letter, or email the OIG Hotline as identified at the right. The OIG also has personnel at our 11 locations to receive allegations in person. Allegations may be reported by DOE

  11. United States Forest Service - Forest Service Environmental Appeals...

    Open Energy Information (Open El) [EERE & EIA]

    Responses Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service Environmental Appeals Responses Abstract...

  12. United States Forest Service - Forest Service Schedule of Proposed...

    Open Energy Information (Open El) [EERE & EIA]

    Actions Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service Schedule of Proposed Actions Abstract The...

  13. Mr. Robert C, Smith Federal Acquisition Service General Services...

    Energy.gov (indexed) [DOE]

    Robert C, Smith Federal Acquisition Service General Services Administration 2200 Crystal Drive, Suite 300 Arlington, VA 20406 Dear Mr. Smith: The Department of Energy (DOE) will ...

  14. Method for compression of data using single pass LZSS and run-length encoding

    DOE Patents [OSTI]

    Berlin, G.J.

    1994-01-01

    A method used preferably with LZSS-based compression methods for compressing a stream of digital data. The method uses a run-length encoding scheme especially suited for data strings of identical data bytes having large run-lengths, such as data representing scanned images. The method reads an input data stream to determine the length of the data strings. Longer data strings are then encoded in one of two ways depending on the length of the string. For data strings having run-lengths less than 18 bytes, a cleared offset and the actual run-length are written to an output buffer and then a run byte is written to the output buffer. For data strings of 18 bytes or longer, a set offset and an encoded run-length are written to the output buffer and then a run byte is written to the output buffer. The encoded run-length is written in two parts obtained by dividing the run length by a factor of 255. The first of two parts of the encoded run-length is the quotient; the second part is the remainder. Data bytes that are not part of data strings of sufficient length are written directly to the output buffer.

  15. Method for compression of data using single pass LZSS and run-length encoding

    DOE Patents [OSTI]

    Berlin, G.J.

    1997-12-23

    A method used preferably with LZSS-based compression methods for compressing a stream of digital data is disclosed. The method uses a run-length encoding scheme especially suited for data strings of identical data bytes having large run-lengths, such as data representing scanned images. The method reads an input data stream to determine the length of the data strings. Longer data strings are then encoded in one of two ways depending on the length of the string. For data strings having run-lengths less than 18 bytes, a cleared offset and the actual run-length are written to an output buffer and then a run byte is written to the output buffer. For data strings of 18 bytes or longer, a set offset and an encoded run-length are written to the output buffer and then a run byte is written to the output buffer. The encoded run-length is written in two parts obtained by dividing the run length by a factor of 255. The first of two parts of the encoded run-length is the quotient; the second part is the remainder. Data bytes that are not part of data strings of sufficient length are written directly to the output buffer. 3 figs.

  16. Method for compression of data using single pass LZSS and run-length encoding

    DOE Patents [OSTI]

    Berlin, Gary J.

    1997-01-01

    A method used preferably with LZSS-based compression methods for compressing a stream of digital data. The method uses a run-length encoding scheme especially suited for data strings of identical data bytes having large run-lengths, such as data representing scanned images. The method reads an input data stream to determine the length of the data strings. Longer data strings are then encoded in one of two ways depending on the length of the string. For data strings having run-lengths less than 18 bytes, a cleared offset and the actual run-length are written to an output buffer and then a run byte is written to the output buffer. For data strings of 18 bytes or longer, a set offset and an encoded run-length are written to the output buffer and then a run byte is written to the output buffer. The encoded run-length is written in two parts obtained by dividing the run length by a factor of 255. The first of two parts of the encoded run-length is the quotient; the second part is the remainder. Data bytes that are not part of data strings of sufficient length are written directly to the output buffer.

  17. Renewable Energy Catalog of Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Catalog of Services The U.S. Department of Energy Federal Energy Management Program March 2015 Renewable Energy Catalog of Services Contacts Contacts Jesse Gary FEMP 1000 ...

  18. Eastern Power Customer Services Manager

    Energy.gov [DOE]

    This position is located in the Eastern Power Services organization (PSE) of Northwest Requirements Marketing, Power Services, and Bonneville Power Administration (BPA). Northwest (NW) Requirements...

  19. Western Power Customer Services Manager

    Energy.gov [DOE]

    This position is located in the Western Power Services organization (PSW) of Northwest Requirements Marketing, Power Services, and Bonneville Power Administration (BPA). Northwest (NW) Requirements...

  20. Scotoil Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Product: Division of the Scotoil Group that delivers the group's suite of environmental services. Coordinates: 46.975867, -123.81598 Show Map Loading map......

  1. VT Nuclear Services ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    VT Nuclear Services ltd Jump to: navigation, search Name: VT Nuclear Services ltd Place: Warrington, United Kingdom Zip: WA4 4BP Sector: Services Product: VT Nuclear Services...

  2. Alternative Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Jump to: navigation, search Logo: Alternative Energy Services Name: Alternative Energy Services Place: Florida Product: renewable energy products and services Phone...

  3. Product Service Codes @ Headquarters | Department of Energy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Codes @ Headquarters A listing of Product Service Codes used at Headquarters Procurement Services PDF icon Produce Service Codes @ Headquarters.pdf More Documents &...

  4. Power Services Site Map (pbl/help)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    | Contact Power Services | Help About Power Services Power Services Home Page Power Services Short Cuts Other Related Web Sites BPA Energy Efficiency Volunteer Energy...

  5. Office of Headquarters Procurement Services - Employee Customer Service

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Standards | Department of Energy Office of Headquarters Procurement Services - Employee Customer Service Standards Office of Headquarters Procurement Services - Employee Customer Service Standards CUSTOMER FOCUS The Office of Headquarters Procurement Services (MA-64) serves a variety of customers in the performance of its acquisition and financial assistance mission. Primary among its many customers is each of the Department of Energy Headquarters program offices. MA-64 continually seeks to

  6. Mr. Robert C, Smith Federal Acquisition Service General Services Administration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8,2010 Mr. Robert C, Smith Federal Acquisition Service General Services Administration 2200 Crystal Drive, Suite 300 Arlington, VA 20406 Dear Mr. Smith: The Department of Energy (DOE) will participate as an authorized user of the second generation General Services Administration (GSA) Blanket Purchase Agreement (BPA) Number GS-33F-BQV08 for Express and Ground Domestic Delivery Services (0052) in the continental United States, Alaska, Hawaii, and Puerto Rico. All existing United Parcel Service

  7. Technical Services Agreement

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    TSA-AGMT.DOC (9/06/01) 04/14/13 Technical Services Agreement No. TSA- The National Renewable Energy Laboratory (hereinafter "NREL") Operating under Prime Contract No. DE-AC36-08GO28308 for the Department of Energy And <Sponsor>` (hereinafter "Sponsor") I. Parties to the Technical Services Agreement. The Alliance for Sustainable Energy, LLC as Management and Operating (M&O) Contractor for the National Renewable Energy Laboratory ("Contractor"), under U.S.

  8. Temporary Food Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Food Service The SLAC Café, auditorium and visitor center have been closed and will be replaced with a new Science and User Support Building (SUSB). During this construction (2013-2015), temporary food service will be provided by the Cardinal Chef Mobile Gourmet food trucks. On-Site The food trucks are located in front of Building 27. Hours of Operation Monday through Friday Breakfast: 7:30AM-9:30AM Lunch: 11:00AM-2:00PM Menu: http://www-project.slac.stanford.edu/foodtruckmenu/default.asp Local

  9. Coherent Smith-Purcell radiation as a diagnostic for sub-picosecond electron bunch length

    SciTech Connect (OSTI)

    Nguyen, D.C.

    1996-10-01

    We suggest a novel technique of measuring sub-picosecond electron bunch length base on coherent Smith-Purcell radiation (SPR) emitted when electrons pass close to the surface of a metal grating. With electron bunch lengths comparable to the grating period, we predict that coherent SPR will be emitted at large angles with respect to direction of beam propagation. As the bunch length shortens, the coherent SPR will be enhanced over the incoherent component that is normally observed at small angles. Furthermore, the angular distribution of the coherent SPR will be shifted toward smaller angles as the bunch length becomes much smaller than the grating period. By measuring the angular distribution of the coherent SPR, one can determine the bunch length of sub-picosecond electron pulses. This new technique is easy to implement and appears capable of measuring femtosecond electron bunch lengths.

  10. Analytical Services Management System

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    Analytical Services Management System (ASMS) provides sample management services. Sample management includes sample planning for analytical requests, sample tracking for shipping and receiving by the laboratory, receipt of the analytical data deliverable, processing the deliverable and payment of the laboratory conducting the analyses. ASMS is a web based application that provides the ability to manage these activities at multiple locations for different customers. ASMS provides for the assignment of single to multiple samples for standardmore » chemical and radiochemical analyses. ASMS is a flexible system which allows the users to request analyses by line item code. Line item codes are selected based on the Basic Ordering Agreement (BOA) format for contracting with participating laboratories. ASMS also allows contracting with non-BOA laboratories using a similar line item code contracting format for their services. ASMS allows sample and analysis tracking from sample planning and collection in the field through sample shipment, laboratory sample receipt, laboratory analysis and submittal of the requested analyses, electronic data transfer, and payment of the laboratories for the completed analyses. The software when in operation contains business sensitive material that is used as a principal portion of the Kaiser Analytical Management Services business model. The software version provided is the most recent version, however the copy of the application does not contain business sensitive data from the associated Oracle tables such as contract information or price per line item code.« less

  11. Analytical Services Management System

    SciTech Connect (OSTI)

    Church, Shane; Nigbor, Mike; Hillman, Daniel

    2005-03-30

    Analytical Services Management System (ASMS) provides sample management services. Sample management includes sample planning for analytical requests, sample tracking for shipping and receiving by the laboratory, receipt of the analytical data deliverable, processing the deliverable and payment of the laboratory conducting the analyses. ASMS is a web based application that provides the ability to manage these activities at multiple locations for different customers. ASMS provides for the assignment of single to multiple samples for standard chemical and radiochemical analyses. ASMS is a flexible system which allows the users to request analyses by line item code. Line item codes are selected based on the Basic Ordering Agreement (BOA) format for contracting with participating laboratories. ASMS also allows contracting with non-BOA laboratories using a similar line item code contracting format for their services. ASMS allows sample and analysis tracking from sample planning and collection in the field through sample shipment, laboratory sample receipt, laboratory analysis and submittal of the requested analyses, electronic data transfer, and payment of the laboratories for the completed analyses. The software when in operation contains business sensitive material that is used as a principal portion of the Kaiser Analytical Management Services business model. The software version provided is the most recent version, however the copy of the application does not contain business sensitive data from the associated Oracle tables such as contract information or price per line item code.

  12. MATRIX AND VECTOR SERVICES

    Energy Science and Technology Software Center (OSTI)

    2001-10-18

    PETRA V2 provides matrix and vector services and the ability construct, query, and use matrix and vector objects that are used and computed by TRILINOS solvers. It provides all basic matr5ix and vector operations for solvers in TRILINOS.

  13. Copy Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Copy Services Copy Services Copier Services Staffed Copy Centers Walk-Up Copiers The Copier Management Team is here to make sure your copier needs are met. Our products and services include: Acquisition of New and Replacement Copiers Copier Maintenance/Repairs Copier Relocation Monthly Working Capital Fund Billing Reports Copier supplies (Pickup Copier Supplies in FOR Room GE-140 & GTN Room R-003) Help Desk for AutoStore Other services include needs assessment analysis to determine workload

  14. Measuring short electron bunch lengths using coherent smith-purcell radiation

    DOE Patents [OSTI]

    Nguyen, Dinh C.

    1999-01-01

    A method is provided for directly determining the length of sub-picosecond electron bunches. A metallic grating is formed with a groove spacing greater than a length expected for the electron bunches. The electron bunches are passed over the metallic grating to generate coherent and incoherent Smith-Purcell radiation. The angular distribution of the coherent Smith-Purcell radiation is then mapped to directly deduce the length of the electron bunches.

  15. Measuring short electron bunch lengths using coherent Smith-Purcell radiation

    DOE Patents [OSTI]

    Nguyen, D.C.

    1999-03-30

    A method is provided for directly determining the length of sub-picosecond electron bunches. A metallic grating is formed with a groove spacing greater than a length expected for the electron bunches. The electron bunches are passed over the metallic grating to generate coherent and incoherent Smith-Purcell radiation. The angular distribution of the coherent Smith-Purcell radiation is then mapped to directly deduce the length of the electron bunches. 8 figs.

  16. Three-Body Recombination of {sup 6}Li Atoms with Large Negative Scattering Lengths

    SciTech Connect (OSTI)

    Braaten, Eric; Kang, Daekyoung; Platter, Lucas; Hammer, H.-W.

    2009-08-14

    The three-body recombination rate at threshold for distinguishable atoms with large negative pair scattering lengths is calculated in the zero-range approximation. The only parameters in this limit are the 3 scattering lengths and the Efimov parameter, which can be complex-valued. We provide semianalytic expressions for the cases of 2 or 3 equal scattering lengths, and we obtain numerical results for the general case of 3 different scattering lengths. Our general result is applied to the three lowest hyperfine states of {sup 6}Li atoms. Comparisons with recent experiments provide indications of loss features associated with Efimov trimers near the 3-atom threshold.

  17. United States Forest Service - Forest Service NEPA Procedures...

    Open Energy Information (Open El) [EERE & EIA]

    and Guidance Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service NEPA Procedures and Guidance Abstract This...

  18. Service Academies Research Associates

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Internships » SARA » SARA Service Academies Research Associates (SARA) The academies come to Los Alamos for a summer of science. Contact Jonathan S. Ventura Email application Program Application 2017 Your Name Date of Birth SSN Home Address Phone Email Address at the Academy Academy Approver's Name Academy Approver's Phone Academy Approver's Email GPA (requires minimum 3.0) Academy Major Foreign Language(s) and Proficiency Preferred Work Environment (lab or office space) Dates Available to

  19. Method of servicing wellbores

    SciTech Connect (OSTI)

    Pasztor, A.J.; Stauffer, R.C.

    1981-12-08

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  20. Method of servicing wellbores

    SciTech Connect (OSTI)

    Stauffer, R. C.; Pasztor, A. J.

    1984-12-25

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  1. Internal Revenue Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    5500 Department of the Treasury Internal Revenue Service Department of Labor Employee Benefits Security Administration Pension Benefit Guaranty Corporation Annual Return/Report of Employee Benefit Plan This form is required to be filed for employee benefit plans under sections 104 and 4065 of the Employee Retirement Income Security Act of 1974 (ERISA) and sections 6047(e), 6057(b), and 6058(a) of the Internal Revenue Code (the Code).  Complete all entries in accordance with the instructions

  2. Concentrating Solar Power Services CSP Services | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    providing consulting, due diligence and component testing for Solar Thermal Electricity Generation (STEG). References: Concentrating Solar Power Services (CSP...

  3. Assessing Fatigue and Ultimate Load Uncertainty in Floating Offshore Wind Turbines Due to Varying Simulation Length

    SciTech Connect (OSTI)

    Stewart, G.; Lackner, M.; Haid, L.; Matha, D.; Jonkman, J.; Robertson, A.

    2013-07-01

    With the push towards siting wind turbines farther offshore due to higher wind quality and less visibility, floating offshore wind turbines, which can be located in deep water, are becoming an economically attractive option. The International Electrotechnical Commission's (IEC) 61400-3 design standard covers fixed-bottom offshore wind turbines, but there are a number of new research questions that need to be answered to modify these standards so that they are applicable to floating wind turbines. One issue is the appropriate simulation length needed for floating turbines. This paper will discuss the results from a study assessing the impact of simulation length on the ultimate and fatigue loads of the structure, and will address uncertainties associated with changing the simulation length for the analyzed floating platform. Recommendations of required simulation length based on load uncertainty will be made and compared to current simulation length requirements.

  4. Power Services Site Navigation Menus

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    links for that menu. This page can be accessed via keyboard from other pages on the Power Services web site (access key N). Menu Names: About Power Services | News & Events |...

  5. Employee Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Employee Services The Office of Management provides many of the services that keep the Department of Energy Headquarters offices operational. These services keep the Department's facilities operating, as well as many of the managerial support functions that are shared by many of the Program Offices. These functions are primarily provided by the Office of Administration, MA-40. For a listing of office contacts please use the About Us menu, the Contact Us section, available directly

  6. ESnet's LHCONE Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ESnet's LHCONE Service March 23 rd 2015 Presented by Jason Zurawski, zurawski@es.net Science Engagement Authored by Joe Metzger metzger@es.net Network Engineering What is LHCONE? LHCONE is a Global Science Overlay Network designed for high performance science workflows and dedicated to the HEP community. * LHCONE provides access to HEP Computing Resources at: * LHC Tier 1, and Tier 2 and Tier 3 Centers * Belle II Tier 1 Centers (KEK & PNNL) and Tier 2 centers * Non-science resources are NOT

  7. Resonant dimer relaxation in cold atoms with a large scattering length

    SciTech Connect (OSTI)

    Braaten, Eric; Hammer, H.-W.

    2007-05-15

    Efimov physics refers to universal phenomena associated with a discrete scaling symmetry in the three-body problem with a large scattering length. The first experimental evidence for Efimov physics was the recent observation of a resonant peak in the three-body recombination rate for {sup 133}Cs atoms with large negative scattering length. There can also be resonant peaks in the atom-dimer relaxation rate for large positive scattering length. We calculate the atom-dimer relaxation rate as a function of temperature and show how measurements of the relaxation rate can be used to determine accurately the parameters that govern Efimov physics.

  8. A Bunch Length Monitor for JLab 12 GeV Upgrade

    SciTech Connect (OSTI)

    Ahmad, Mahmoud Mohamad Ali; Freyberger, Arne P.; Gubeli, Joseph F.; Krafft, Geoffrey A.

    2013-12-01

    A continuous non-invasive bunch length monitor for the 12 GeV upgrade of Jefferson Lab will be used to determine the bunch length of the beam. The measurement will be done at the fourth dipole of the injector chicane at 123 MeV using the coherent synchrotron light emitted from the dipole. The estimated bunch length is 333 fs. A vacuum chamber will be fabricated and a Radiabeam real time interferometer will be used. In this paper, background, the estimated calculations and the construction of the chamber will be discussed.

  9. Update on Service Management project

    ScienceCinema (OSTI)

    None

    2016-07-12

    GS and IT Service Management project status meeting -------------------------------------------------------------------------- Distribution: Sigurd Lettow, Frederic Hemmer, Thomas Pettersson, David Foster, Matti Tiirakari, GS&IT; Service Providers When and where: Thursday 2nd September at 10:00-11:30 in IFiltration Plant (222-R-001) Dear All, We would like to inform you about progress made on different topics like the Service Catalogue, the new Service Management Tool and the Service Desk. We would also like to present the plan for when we hope to "go live" and what this will mean for all of you running and providing services today. We will need your active support and help in the coming months to make this happen. GS&IT; Service Management Teams Reinoud Martens, Mats Moller

  10. Providence Financial Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Financial Services Ltd Jump to: navigation, search Name: Providence Financial Services Ltd Place: Stanford, Connecticut Sector: Biomass, Renewable Energy, Services Product:...

  11. Enertech Marketing Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Enertech Marketing Services Jump to: navigation, search Name: Enertech Marketing Services Place: Bangalore, Karnataka, India Zip: 560041 Sector: Services, Solar Product: Enertech...

  12. Tiger Energy Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Inc Jump to: navigation, search Name: Tiger Energy Services Inc. Place: Signal Hill, California Zip: 90755 Sector: Geothermal energy, Services Product: US-based...

  13. Hermes Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Hermes Energy Services Jump to: navigation, search Name: Hermes Energy Services Place: Dursley, United Kingdom Sector: Services Year Founded: 2007 Website: www.hermesenergyservices...

  14. Williams Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Energy Services Jump to: navigation, search Name: Williams Energy Services Place: Tulsa, OK Website: www.williamsenergyservices.com References: Williams Energy Services1...

  15. International Nuclear Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Nuclear Services Ltd Jump to: navigation, search Name: International Nuclear Services Ltd Place: Cheshire, England, United Kingdom Zip: WA3 6AS Sector: Services Product:...

  16. Competing Federal Utility Energy Service Contracts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Competing Federal Utility Energy Service Contracts Competing Federal Utility Energy Service Contracts Opening utility energy service contracts to competing franchised utility ...

  17. Energy Efficiency Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Ltd Jump to: navigation, search Name: Energy Efficiency Services Ltd Place: Delhi (NCT), India Sector: Efficiency, Services Product: Delhi-based joint venture formed to...

  18. Power Services Financial Information (pbl/about)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Web Sites Power Services Organization Power Services Financial Information Net Revenue Sounding Board Tribal Affairs Office Account Executives Customer Service Centers...

  19. Fish and Wildlife Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Wildlife Service Jump to: navigation, search Logo: Fish and Wildlife Service Name: Fish and Wildlife Service Place: Washington, DC Year Founded: 1940 Phone Number: (303) 275-2370...

  20. About Power Services (pbl/main)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    About Power Services Power Home Page Other Related Web Sites Power Services Organization Power Services Financial Information Tribal Affairs Office Account Executives Customer...

  1. National Park Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Service Jump to: navigation, search Logo: National Park Service Name: National Park Service Address: 1849 C Street NW Place: Washington, District of Columbia Zip: 20240 Year...

  2. Siemens Government Services ESCO Qualification Sheet | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Siemens Government Services ESCO Qualification Sheet Siemens Government Services ESCO Qualification Sheet Fact sheet outlines the energy service company (ESCO) qualification for ...

  3. Property:Test Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Test Services Jump to: navigation, search Property Name Test Services Property Type String Pages using the property "Test Services" Showing 25 pages using this property. (previous...

  4. Aecom Government Services AGS | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Zip: 76102 Sector: Renewable Energy, Services Product: Texas-based government services arm of AECOM. The entity offers engineering services to the renewable energy sector....

  5. REMOTE ACCESS SERVICES | Department of Energy

    Office of Environmental Management (EM)

    Energy IT Services (EITS) Remote Access Services: Outlook Web Access RSA Token Login RSA ... Energy Information Administration (EIA) Remote Access Services Outlook Web Access EIA VPN ...

  6. Materials and Transportation Services | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Materials and Transportation Services General Information: Materials and Transportation Services provides Ames Laboratory employees with a wide array of services and support...

  7. 23 V.S.A. Section 1432 Length of Vehicles; Authorized Highways...

    Open Energy Information (Open El) [EERE & EIA]

    23 V.S.A. Section 1432 Length of Vehicles; Authorized Highways Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: 23 V.S.A. Section...

  8. Depth-dependent ordering, two-length-scale phenomena, and crossover...

    Office of Scientific and Technical Information (OSTI)

    a skin layer with defects Citation Details In-Document Search Title: Depth-dependent ordering, two-length-scale phenomena, and crossover behavior in a crystal featuring a skin ...

  9. On the Minimal Length Uncertainty Relation and the Foundations of String Theory

    DOE PAGES-Beta [OSTI]

    Chang, Lay Nam; Lewis, Zachary; Minic, Djordje; Takeuchi, Tatsu

    2011-01-01

    We review our work on the minimal length uncertainty relation as suggested by perturbative string theory. We discuss simple phenomenological implications of the minimal length uncertainty relation and then argue that the combination of the principles of quantum theory and general relativity allow for a dynamical energy-momentum space. We discuss the implication of this for the problem of vacuum energy and the foundations of nonperturbative string theory.

  10. A Model for Fiber Length Attrition in Injection-Molded Long-Fiber Composites

    SciTech Connect (OSTI)

    TuckerIII, Charles L. [University of Illinois, Urbana-Champaign; Phelps, Jay H [University of Illinois, Urbana-Champaign; El-Rahman, Ahmed Abd [University of Illinois, Urbana-Champaign; Kunc, Vlastimil [ORNL

    2013-01-01

    Long-fiber thermoplastic (LFT) composites consist of an engineering thermoplastic matrix with glass or carbon reinforcing fibers that are initially 10 to 13 mm long. When an LFT is injection molded, flow during mold filling orients the fibers and degrades the fiber length. Fiber orientation models for injection molding are well developed, and special orientation models for LFTs have been developed. Here we present a detailed quantitative model for fiber length attrition in a flowing fiber suspension. The model tracks a discrete fiber length distribution (FLD) at each spatial node. Key equations are a conservation equation for total fiber length, and a breakage rate equation. The breakage rate is based on buckling of fibers due to hydrodynamic forces, when the fibers are in unfavorable orientations. The FLD model is combined with a mold filling simulation to predict spatial and temporal variations in fiber length distribution in a mold cavity during filling. The predictions compare well to experiments on a glassfiber/ PP LFT molding. Fiber length distributions predicted by the model are easily incorporated into micromechanics models to predict the stress-strain behavior of molded LFT materials. Author to whom correspondence should be addressed; electronic mail: ctucker@illinois.edu 1

  11. On the extraction of laminar flame speed and Markstein length from outwardly propagating spherical flames

    SciTech Connect (OSTI)

    Chen, Zheng [State Key Laboratory for Turbulence and Complex Systems, Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University, Beijing 100871 (China)

    2011-02-15

    Large discrepancies among the laminar flame speeds and Markstein lengths of methane/air mixtures measured by different researchers using the same constant-pressure spherical flame method are observed. As an effort to reduce these discrepancies, one linear model (LM, the stretched flame speed changes linearly with the stretch rate) and two non-linear models (NM I and NM II, the stretched flame speed changes non-linearly with the stretch rate) for extracting the laminar flame speed and Markstein length from propagating spherical flames are investigated. The accuracy and performance of the LM, NM I, and NM II are found to strongly depend on the Lewis number. It is demonstrated that NM I is the most accurate for mixtures with large Lewis number (positive Markstein length) while NM II is the most accurate for mixtures with small Lewis number (negative Markstein length). Therefore, in order to get accurate laminar flame speed and Markstein length from spherical flame experiments, different non-linear models should be used for different mixtures. The validity of the theoretical results is further demonstrated by numerical and experimental studies. The results of this study can be used directly in spherical flame experiments measuring the laminar flame speed and Markstein length. (author)

  12. Final joint environmental assessment for the construction and routine operation of a 12-kilovolt (KV) overhead powerline right-of-way, and formal authorization for a 10-inch and 8-inch fresh water pipeline right-of-way, Naval Petroleum Reserve No. 1, Kern County, California

    SciTech Connect (OSTI)

    Not Available

    1994-10-01

    The purpose and need of the proposed action, which is the installation of an overhead powerline extension from an Naval Petroleum Reserve No. 1 (NPR-1) power source to the WKWD Station A, is to significantly reduce NPR-1`s overall utility costs. While the proposed action is independently justified on its own merits and is not tied to the proposed NPR-1 Cogeneration Facility, the proposed action would enable DOE to tie the NPR-1 fresh water pumps at Station A into the existing NPR-1 electrical distribution system. With the completion of the cogeneration facility in late 1994 or early 1995, the proposed action would save additional utility costs. This report deals with the environmental impacts of the construction of the powerline and the water pipeline. In addition, information is given about property rights and attaining permission to cross the property of proposed affected owners.

  13. Next Update: November 2016 Geographic Area Capacity In-Service

    U.S. Energy Information Administration (EIA) (indexed site)

    Geographic Area Capacity In-Service Data Year NERC Region Type Operating (kV) Design (kV) Rating (MVa) Month/Year From Terminal To Terminal Length (Miles) Type Company Code Company Name Organizational Type Ownership (Percent) Project Name Level of Certainty Primary Driver 1 Primary Driver 2 2014 FRCC AC 200-299 115 460 1/2016 SUB 4 230.00 SUB 7 230.00 3.8 OH 18445 of Tallahassee M 100% 0.00 - SUB 7 230.00 Under Constructio Reliability 2014 FRCC AC 100-120 115 232 12/2016 Sub 14 115 Sub 7 115 6.0

  14. FY 2015 Service Contract Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy FY 2015 Service Contract Inventory Analysis Plan Department of Energy Office of Acquisition Management Strategic Programs Division (MA-622) January 2016 Department of Energy FY 2015 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)), Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories,,

  15. IT Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    IT Services IT Services banner-909710_960_720.jpg Transform, Protect, and Advance - DOE's IT Modernization Strategy The White House Digital Government Strategy lays a strong foundation for government-wide technology modernization. In response, the Department has established 10 key objectives that will Transform, Protect, and Advance the IT ecosystem of the future, including: Enabling hybrid cloud computing to connect networks and services Establishing cybersecurity policy Deploying enterprise

  16. About the Senior Executive Service

    Energy.gov [DOE]

    The Senior Executive Service (SES) was established by Title IV of the Civil Service Reform Act (CSRA) of 1978 [P.L. 95-454, October 13, 1978] and became effective on July 13, 1979. The CSRA envisioned a Senior Executive Service whose members shared values, a broad perspective of Government, and solid executive skills. Members of a “corporate SES” respected and embraced the dynamics of American democracy - an approach to governance that provided a continuing vehicle for change.

  17. DICE Diagnostic Service Joe Metzger

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DICE Diagnostic Service Joe Metzger metzger@es.net Joint Techs Measurement Working Group January 27 2011 Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Background Each of the DICE collaborators are defining and delivering services to their users. A subset of these services will be a lot more useful for everyone if all of the DICE participants deploy them in an interoperable fashion. A decision was made last winter to add more rigor or structure to our

  18. US Forest Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    US Forest Service Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleUSForestService&oldid442004...

  19. Coordinating Energy Efficiency With Water Conservation Services...

    Energy Savers

    With Water Conservation Services Coordinating Energy Efficiency With Water Conservation Services Better Buildings Residential Network Program Sustainability Peer Exchange Call ...

  20. Sun Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Sector: Renewable Energy Product: Renewable Energy System Consulting and Design, Photovoltaic installation, Design of Passive Houses and LED Lighting References: Sun Service1...

  1. Project Financing Catalog of Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Financing Catalog of Services The U.S. Department of Energy Federal Energy Management Program September 2016 Table of Contents Contents Contents ........................................................................................................................................................ i Executive Summary ..................................................................................................................................... i Planning Phase

  2. HIC Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Name: HIC & Services Place: Prague 10, Czech Republic Zip: CZ - 108 00 Product: Czech chemical company which is developing a method for physical purification of upgraded...

  3. Director, Information Technologies Services Office

    Energy.gov [DOE]

    The mission of the Information Technologies Services Office (ITSO) is to provide effective corporate leadership to proactively identify and manage business system efficiency improvements and to...

  4. ORISE: Radiological program assessment services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ORISE focuses its radiological audit and assessment services in these key areas: Nondestructive assay (NDA) Radiological control programs Environmental monitoring programs ...

  5. Food Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Building Types 1 References EIA CBECS Building Types U.S. Energy Information Administration (Oct 2008) Retrieved from "http:en.openei.orgwindex.php?titleFoodService&old...

  6. Boyer wins Meritorious Service Award

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Boyer wins Meritorious Service Award from INMM September 5, 2013 The Institute of Nuclear Materials Management (INMM) honored Brian D. Boyer of the Laboratory's Systems Design and ...

  7. Financial, Audits, and Contracts Services

    Energy.gov [DOE]

    The Office of Legacy Management’s (LM) Financial, Audits, and Contracts Services (FACS) Team performs the following management functions:

  8. Technical Services Supply Process Specialist

    Energy.gov [DOE]

    This position is located in Vancouver, Washington, and serves as senior process and procedure specialist within Technical Services Support (NSTS), and is responsible for the technical assimilation...

  9. SF6432-CS Commercial Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    with the Directorate of Defense Trade Control : SF 6432-CS Title: Standard Terms and Conditions for Commercial Services Owner: Procurement Policy & Quality Dept Release Date:...

  10. Priority service: managing risk by unbundling electric power service

    SciTech Connect (OSTI)

    Chao, H.P.; Oren, S.S.; Smith, S.A.; Wilson, R.B.

    1986-03-01

    The basic features of the Priority Service approach for unbundling the equality attributes of electric power service is described. This paper pointed out how this unbundling of service provides an effective tool for managing the risks faced by electric utilities in the next decade. It is also interesting to compare the features of Priority Service to those that result from deregulation of supply in other industries. In the transportation and communications industries, a primary result of deregulation has been a substantial increase in product differentiation and the tailoring of products to specific customer needs. Thus Priority Service, as a means of product differentiation, offers an opportunity to capture some of the benefits of deregulation without the associated uncertainties and instabilities that are often introduced by deregulating markets. 2 figures, 5 tables.

  11. Information Services Directory

    SciTech Connect (OSTI)

    1991-03-01

    Congress passed the Nuclear Waste Policy Act of 1982 (NWPA) and its amendments establishing the national policy for safely storing, transporting and disposing of spent nuclear fuel and high-level radioactive waste in a geologic repository. This legislation created the Office of Civilian Radioactive Waste Management (OCRWM) within the US Department of Energy (DOE) to develop an integrated system for the safe and efficient disposal of high-level radioactive waste. The NWPA, as amended, directs DOE to study in detail the Yucca Mountain site in Nevada as the only candidate site for the Nation`s geologic repository. This Information Services Directory is intended to facilitate dissemination of information. The Directory is produced by the Education and Information Division of OCRWM`s Office of External Relations and will be updated periodically. This is the third such update since its issuance in August 1986. It is a reference document that lists the sources of program information available to states, Indian tribes, and the public.

  12. Simulation-Length Requirements in the Loads Analysis of Offshore Floating Wind Turbines: Preprint

    SciTech Connect (OSTI)

    Haid, L.; Stewart, G.; Jonkman, J.; Robertson, A.; Lackner, M.; Matha, D.

    2013-06-01

    The goal of this paper is to examine the appropriate length of a floating offshore wind turbine (FOWT) simulation - a fundamental question that needs to be answered to develop design requirements. To examine this issue, a loads analysis of an example FOWT was performed in FAST with varying simulation lengths. The offshore wind system used was the OC3-Hywind spar buoy, which was developed for use in the International Energy Agency Code Comparison Collaborative Project and supports NREL's offshore 5-megawatt baseline turbine. Realistic metocean data from the National Oceanic and Atmospheric Administration and repeated periodic wind files were used to excite the structure. The results of the analysis clearly show that loads do not increase for longer simulations. In regards to fatigue, a sensitivity analysis shows that the procedure used for counting half cycles is more important than the simulation length itself. Based on these results, neither the simulation length nor the periodic wind files affect response statistics and loads for FOWTs (at least for the spar studied here); a result in contrast to the offshore oil and gas industry, where running simulations of at least 3 hours in length is common practice.

  13. Current sheath formation dynamics and structure for different insulator lengths of plasma focus device

    SciTech Connect (OSTI)

    Seng, Y. S.; Lee, P.; Rawat, R. S.

    2014-11-15

    The breakdown phase of the UNU-ICTP plasma focus (PF) device was successfully simulated using the electromagnetic particle in cell method. A clear uplift of the current sheath (CS) layer was observed near the insulator surface, accompanied with an exponential increase in the plasma density. Both phenomena were found to coincide with the surge in the electric current, which is indicative of voltage breakdown. Simulations performed on the device with different insulator lengths showed an increase in the fast ionization wave velocity with length. The voltage breakdown time was found to scale linearly with the insulator length. Different spatial profiles of the CS electron density, and the associated degree of uniformity, were found to vary with different insulator lengths. The ordering, according to the degree of uniformity, among insulator lengths of 19, 22, and 26?mm agreed with that in terms of soft X-ray radiation yield observed from experiments. This suggests a direct correlation between CS density homogeneity near breakdown and the radiation yield performance. These studies were performed with a linearly increasing voltage time profile as input to the PF device.

  14. A Two-length Scale Turbulence Model for Single-phase Multi-fluid Mixing

    SciTech Connect (OSTI)

    Schwarzkopf, J. D.; Livescu, D.; Baltzer, J. R.; Gore, R. A.; Ristorcelli, J. R.

    2015-09-08

    A two-length scale, second moment turbulence model (Reynolds averaged Navier-Stokes, RANS) is proposed to capture a wide variety of single-phase flows, spanning from incompressible flows with single fluids and mixtures of different density fluids (variable density flows) to flows over shock waves. The two-length scale model was developed to address an inconsistency present in the single-length scale models, e.g. the inability to match both variable density homogeneous Rayleigh-Taylor turbulence and Rayleigh-Taylor induced turbulence, as well as the inability to match both homogeneous shear and free shear flows. The two-length scale model focuses on separating the decay and transport length scales, as the two physical processes are generally different in inhomogeneous turbulence. This allows reasonable comparisons with statistics and spreading rates over such a wide range of turbulent flows using a common set of model coefficients. The specific canonical flows considered for calibrating the model include homogeneous shear, single-phase incompressible shear driven turbulence, variable density homogeneous Rayleigh-Taylor turbulence, Rayleigh-Taylor induced turbulence, and shocked isotropic turbulence. The second moment model shows to compare reasonably well with direct numerical simulations (DNS), experiments, and theory in most cases. The model was then applied to variable density shear layer and shock tube data and shows to be in reasonable agreement with DNS and experiments. Additionally, the importance of using DNS to calibrate and assess RANS type turbulence models is highlighted.

  15. Materials for Harsh Service Conditions:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Materials for Harsh Service Conditions: 1 Technology Assessment 2 Contents 3 1. Introduction to the Technology/System ............................................................................................... 1 4 1.1 Overview of Materials for Harsh Service Conditions .................................................................... 1 5 1.2 Challenges and Opportunities ....................................................................................................... 2 6 1.3 Public

  16. Determination of the Pt spin diffusion length by spin-pumping and spin Hall effect

    SciTech Connect (OSTI)

    Zhang, Wei; Pearson, John E.; Hoffmann, Axel; Vlaminck, Vincent; Divan, Ralu; Bader, Samuel D.

    2013-12-09

    The spin diffusion length of Pt at room temperature and at 8 K is experimentally determined via spin pumping and spin Hall effect in permalloy/Pt bilayers. Voltages generated during excitation of ferromagnetic resonance from the inverse spin Hall effect and anisotropic magnetoresistance effect were investigated with a broadband approach. Varying the Pt layer thickness gives rise to an evolution of the voltage line shape due to the superposition of the above two effects. By studying the ratio of the two voltage components with the Pt layer thickness, the spin diffusion length of Pt can be directly extracted. We obtain a spin diffusion length of ∼1.2 nm at room temperature and ∼1.6 nm at 8 K.

  17. Laser interferometric method for determining the carrier diffusion length in semiconductors

    SciTech Connect (OSTI)

    Manukhov, V. V.; Fedortsov, A. B.; Ivanov, A. S.

    2015-09-15

    A new laser interferometric method for measuring the carrier diffusion length in semiconductors is proposed. The method is based on the interference–absorption interaction of two laser radiations in a semiconductor. Injected radiation generates additional carriers in a semiconductor, which causes a change in the material’s optical constants and modulation of the probing radiation passed through the sample. When changing the distance between carrier generation and probing points, a decrease in the carrier concentration, which depends on the diffusion length, is recorded. The diffusion length is determined by comparing the experimental and theoretical dependences of the probe signal on the divergence of the injector and probe beams. The method is successfully tested on semiconductor samples with different thicknesses and surface states and can be used in scientific research and the electronics industry.

  18. Nano-scaled graphene platelets with a high length-to-width aspect ratio

    DOE Patents [OSTI]

    Zhamu, Aruna; Guo, Jiusheng; Jang, Bor Z.

    2010-09-07

    This invention provides a nano-scaled graphene platelet (NGP) having a thickness no greater than 100 nm and a length-to-width ratio no less than 3 (preferably greater than 10). The NGP with a high length-to-width ratio can be prepared by using a method comprising (a) intercalating a carbon fiber or graphite fiber with an intercalate to form an intercalated fiber; (b) exfoliating the intercalated fiber to obtain an exfoliated fiber comprising graphene sheets or flakes; and (c) separating the graphene sheets or flakes to obtain nano-scaled graphene platelets. The invention also provides a nanocomposite material comprising an NGP with a high length-to-width ratio. Such a nanocomposite can become electrically conductive with a small weight fraction of NGPs. Conductive composites are particularly useful for shielding of sensitive electronic equipment against electromagnetic interference (EMI) or radio frequency interference (RFI), and for electrostatic charge dissipation.

  19. CHARACTERISTIC LENGTH OF ENERGY-CONTAINING STRUCTURES AT THE BASE OF A CORONAL HOLE

    SciTech Connect (OSTI)

    Abramenko, V. I.; Yurchyshyn, V. B.; Goode, P. R.; Ahn, K.; Cao, W.; Zank, G. P.; Dosch, A.

    2013-08-20

    An essential parameter for models of coronal heating and fast solar wind acceleration that rely on the dissipation of MHD turbulence is the characteristic energy-containing length {lambda} of the squared velocity and magnetic field fluctuations (u{sup 2} and b{sup 2}) transverse to the mean magnetic field inside a coronal hole (CH) at the base of the corona. The characteristic length scale directly defines the heating rate. We use a time series analysis of solar granulation and magnetic field measurements inside two CHs obtained with the New Solar Telescope at Big Bear Solar Observatory. A data set for transverse magnetic fields obtained with the Solar Optical Telescope/Spectro-Polarimeter on board the Hinode spacecraft was utilized to analyze the squared transverse magnetic field fluctuations b{sub t}{sup 2}. Local correlation tracking was applied to derive the squared transverse velocity fluctuations u {sup 2}. We find that for u {sup 2} structures, the Batchelor integral scale {lambda} varies in a range of 1800-2100 km, whereas the correlation length sigmav and the e-folding length L vary between 660 and 1460 km. Structures for b{sub t}{sup 2} yield {lambda} Almost-Equal-To 1600 km, sigmav Almost-Equal-To 640 km, and L Almost-Equal-To 620 km. An averaged (over {lambda}, sigmav, and L) value of the characteristic length of u {sup 2} fluctuations is 1260 {+-} 500 km, and that of b{sub t}{sup 2} is 950 {+-} 560 km. The characteristic length scale in the photosphere is approximately 1.5-50 times smaller than that adopted in previous models (3-30 Multiplication-Sign 10{sup 3} km). Our results provide a critical input parameter for current models of coronal heating and should yield an improved understanding of fast solar wind acceleration.

  20. Temperature and length scale dependence of hydrophobic effects and their possible implications for protein folding

    SciTech Connect (OSTI)

    Huang, David M.; Chandler, David

    2000-04-01

    The Lum-Chandler-Weeks theory of hydrophobicity [J. Phys. Chem. 103, 4570 (1999)] is applied to treat the temperature dependence of hydrophobic solvation in water. The application illustrates how the temperature dependence for hydrophobic surfaces extending less than 1nm differs significantly from that for surfaces extending more than 1nm. The latter is the result of water depletion, a collective effect, that appears at length scales of 1nm and larger. Due to the contrasting behaviors at small and large length scales, hydrophobicity by itself can explain the variable behavior of protein folding.

  1. RESTful Web Services at BNL

    SciTech Connect (OSTI)

    Casella, R.

    2011-06-14

    RESTful (REpresentational State Transfer) web services are an alternative implementation to SOAP/RPC web services in a client/server model. BNLs IT Division has started deploying RESTful Web Services for enterprise data retrieval and manipulation. Data is currently used by system administrators for tracking configuration information and as it is expanded will be used by Cyber Security for vulnerability management and as an aid to cyber investigations. This talk will describe the implementation and outstanding issues as well as some of the reasons for choosing RESTful over SOAP/RPC and future directions.

  2. Coiled tubing; Operations and services

    SciTech Connect (OSTI)

    Sas-Jaworsky, A. II )

    1991-12-01

    This article outlines the minimum safety requirements that should be considered for onshore and offshore oil well service operations with coiled tubing equipment. These guidelines comply with Minerals Management Service (MMS) regulations issued on May 31, 1988, for offshore work. Where specific MMS regulations are sited, the regulation reference, Incident of Non-Compliance (INC), number is provided. These guidelines can be used by operators and contractors, and although U.S. offshore operations are emphasized, they are applicable wherever coiled tubing services are used.

  3. Bunch length compression method for free electron lasers to avoid parasitic compressions

    SciTech Connect (OSTI)

    Douglas, David R.; Benson, Stephen; Nguyen, Dinh Cong; Tennant, Christopher; Wilson, Guy

    2015-05-26

    A method of bunch length compression method for a free electron laser (FEL) that avoids parasitic compressions by 1) applying acceleration on the falling portion of the RF waveform, 2) compressing using a positive momentum compaction (R.sub.56>0), and 3) compensating for aberration by using nonlinear magnets in the compressor beam line.

  4. The accuracy of climate models' simulated season lengths and the effectiveness of grid scale correction factors

    SciTech Connect (OSTI)

    Winterhalter, Wade E.

    2011-09-01

    Global climate change is expected to impact biological populations through a variety of mechanisms including increases in the length of their growing season. Climate models are useful tools for predicting how season length might change in the future. However, the accuracy of these models tends to be rather low at regional geographic scales. Here, I determined the ability of several atmosphere and ocean general circulating models (AOGCMs) to accurately simulate historical season lengths for a temperate ectotherm across the continental United States. I also evaluated the effectiveness of regional-scale correction factors to improve the accuracy of these models. I found that both the accuracy of simulated season lengths and the effectiveness of the correction factors to improve the model's accuracy varied geographically and across models. These results suggest that regional specific correction factors do not always adequately remove potential discrepancies between simulated and historically observed environmental parameters. As such, an explicit evaluation of the correction factors' effectiveness should be included in future studies of global climate change's impact on biological populations.

  5. Comparison between length and velocity gauges in quantum simulations of high-order harmonic generation

    SciTech Connect (OSTI)

    Han, Yong-Chang; Madsen, Lars Bojer

    2010-06-15

    We solve the time-dependent Schroedinger equation for atomic hydrogen in an intense field using spherical coordinates with a radial grid and a spherical harmonic basis for the angular part. We present the high-order harmonic spectra based on three different forms, the dipole, dipole velocity, and acceleration forms, and two gauges, the length and velocity gauges. The relationships among the harmonic phases obtained from the Fourier transform of the three forms are discussed in detail. Although quantum mechanics is gauge invariant and the length and velocity gauges should give identical results, the two gauges present different computation efficiencies, which reflects the different behavior in terms of characteristics of the physical couplings acting in the two gauges. In order to obtain convergence, more angular momentum states are required in the length gauge, while more grid points are required in the velocity gauge. At lower laser intensity, the calculation in the length gauge is faster than that in the velocity gauge, while at high laser intensity, the calculation in the velocity gauge is more efficient. The velocity gauge is also expected to be more efficient in higher-dimensional calculations.

  6. Infrared Spectroscope for Electron Bunch-length Measurement: Heat Sensor Parameters Analysis

    SciTech Connect (OSTI)

    Domgmo-Momo, Gilles; /Towson U. /SLAC

    2012-09-05

    The Linac Coherent Light Source (LCLS) is used for many experiments. Taking advantage of the free electron laser (FEL) process, scientists of various fields perform experiments of all kind. Some for example study protein folding; other experiments are more interested in the way electrons interact with the molecules before they are destroyed. These experiments among many others have very little information about the electrons x-ray produced by the FEL, except that the FEL is using bunches less than 10 femtoseconds long. To be able to interpret the data collected from those experiments, more accurate information is needed about the electron's bunch-length. Existing bunch length measurement techniques are not suitable for the measurement of such small time scales. Hence the need to design a device that will provide more precise information about the electron bunch length. This paper investigates the use of a pyreoelectric heat sensor that has a sensitivity of about 1.34 micro amps per watt for the single cell detector. Such sensitivity, added to the fact that the detector is an array sensor, makes the detector studied the primary candidate to be integrated to an infrared spectrometer designed to better measure the LCLS electron bunch length.

  7. Achromatic recirculated chicane with fixed geometry and independently variable path length and momentum compaction

    DOE Patents [OSTI]

    Douglas, David R.; Neil, George R.

    2005-04-26

    A particle beam recirculated chicane geometry that, through the inducement of a pair of 180 degree bends directed by the poles of a pair of controllable magnetic fields allows for variation of dipole position, return loop radii and steering/focussing, thereby allowing the implementation of independent variation of path length and momentum compaction.

  8. Tapered laser rods as a means of minimizing the path length of trapped barrel mode rays

    DOE Patents [OSTI]

    Beach, Raymond J.; Honea, Eric C.; Payne, Stephen A.; Mercer, Ian; Perry, Michael D.

    2005-08-30

    By tapering the diameter of a flanged barrel laser rod over its length, the maximum trapped path length of a barrel mode can be dramatically reduced, thereby reducing the ability of the trapped spontaneous emission to negatively impact laser performance through amplified spontaneous emission (ASE). Laser rods with polished barrels and flanged end caps have found increasing application in diode array end-pumped laser systems. The polished barrel of the rod serves to confine diode array pump light within the rod. In systems utilizing an end-pumping geometry and such polished barrel laser rods, the pump light that is introduced into one or both ends of the laser rod, is ducted down the length of the rod via the total internal reflections (TIRs) that occur when the light strikes the rod's barrel. A disadvantage of using polished barrel laser rods is that such rods are very susceptible to barrel mode paths that can trap spontaneous emission over long path lengths. This trapped spontaneous emission can then be amplified through stimulated emission resulting in a situation where the stored energy available to the desired lasing mode is effectively depleted, which then negatively impacts the laser's performance, a result that is effectively reduced by introducing a taper onto the laser rod.

  9. The accuracy of climate models' simulated season lengths and the effectiveness of grid scale correction factors

    DOE PAGES-Beta [OSTI]

    Winterhalter, Wade E.

    2011-09-01

    Global climate change is expected to impact biological populations through a variety of mechanisms including increases in the length of their growing season. Climate models are useful tools for predicting how season length might change in the future. However, the accuracy of these models tends to be rather low at regional geographic scales. Here, I determined the ability of several atmosphere and ocean general circulating models (AOGCMs) to accurately simulate historical season lengths for a temperate ectotherm across the continental United States. I also evaluated the effectiveness of regional-scale correction factors to improve the accuracy of these models. I foundmore » that both the accuracy of simulated season lengths and the effectiveness of the correction factors to improve the model's accuracy varied geographically and across models. These results suggest that regional specific correction factors do not always adequately remove potential discrepancies between simulated and historically observed environmental parameters. As such, an explicit evaluation of the correction factors' effectiveness should be included in future studies of global climate change's impact on biological populations.« less

  10. SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Form documents modifications and changes to approved assignments and courses. SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) (100.74 KB) More Documents & Publications SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT PROGRAM (SESCDP) Candidate Developmental Assignment Evaluation SENIOR EXECUTIVE SERVICE CANDIDATE DEVELOPMENT

  11. Project Financing Catalog of Services

    Energy.gov [DOE]

    Document details the Federal Energy Management Program's catalog of technical assistance services it offers for federal agencies that want to use project funding mechanisms to finance energy efficiency and renewable energy projects.

  12. Transfer Service (contracts/rd)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    issues regarding Transfer Service. Questions on this program can be sent to Garry Thompson at grthompson@bpa.gov or Connie Howard at cmhoward@bpa.gov. Comments can be e-mailed...

  13. Sandia National Laboratories: Customer Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Customer Service Alt text PSL Helpline The PSL is a customer-focused enterprise. If you need assistance or wish to provide feedback, call the PSL Helpline at (505) 845-8855 or email pslhelp@sandia.gov

  14. Performance-Based Services Acquisition

    Energy.gov (indexed) [DOE]

    Services Acquisition Reference: Public Law 106-398, 821, FAR 37.6 1.0 Summary of ... Federal acquisition law has established a preference for PBSA, which improves procurement ...

  15. David Turner! User Services Group

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    User Services Group Accounts and Allocations --- 1 --- September 10, 2013 Accounts There a re t wo t ypes o f a ccounts a t N ERSC. 1. Your p ersonal, p rivate a ccount * ...

  16. Fleet Managment Catalog of Services

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fleet Management Catalog of Services The U.S. Department of Energy Federal Energy Management Program September 2016 Table of Contents Contents Contents ........................................................................................................................................................ i Executive Summary ..................................................................................................................................... i Planning Phase

  17. Excel to NGDS Services Tool

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    This site allows state data contributors to standardize their data in a USIGN content model, ensure that it meets all specifications, reprojects spatial data, and creates a geodatabase that is ready for web services deployment for tier 3 data.

  18. FY 2014 Service Contract Inventory ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    are listed by their Product Service Codes (PSC) in Figure 1: OMB Designated Special Interest Functions. 2 Special ... The individual who can serve on the working group is Jeff Davis, ...

  19. FY 2014 Service Contract Inventory ...

    Office of Environmental Management (EM)

    Scope 1 Section 2: Methodology 3 Section 3: Findings 5 Section 4: Actions Taken or Planned 6 FY 2014 Service Contract Inventory Analysis Department of Energy 1 Section 1: Scope ...

  20. FY 2013 Service Contract Inventory ...

    Energy Savers

    Scope 2 Section 2: Methodology 4 Section 3: Findings 6 Section 4: Actions Taken or Planned 7 FY 2013 Service Contract Inventory Analysis Department of Energy 2 Section 1: Scope ...

  1. Transmission Services Product Pricing Validation

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and 09:00 PPT on the above effective date. On October 15, 2013, at 08:00 (PPT), Transmission Services will be updating the OASIS default product prices to reflect the 2014...

  2. Transmission Services Product Pricing Validation

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and 12:00 PPT on the above effective date. On October 1, 2015, at 11:00 (PPT), Transmission Services will be updating the OASIS default product prices to reflect the 2016...

  3. EWEB- Energy Management Services Rebate

    Energy.gov [DOE]

    The Eugene Water & Electric Board (EWEB) offers cash incentives and low interest loans to businesses as part of the Energy Management Services program for the installation of solar domestic,...

  4. ORDER FOR SUPPLIES OR SERVICES

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Carlsbad NM 88221 DE-EM0001840 NET 30 f. SERVICE-DISABLED VETERAN-OWNED e. HUBZone g. WOMEN-OWNED SMALL BUSINESS (WOSB) ELIGIBLE UNDER THE WOSB PROGRAM h. EDWOSB Effective Date...

  5. ORDER FOR SUPPLIES OR SERVICES

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Carlsbad NM 88221 DE-EM0001840 NET 30 f. SERVICE-DISABLED VETERAN-OWNED e. HUBZone g. WOMEN-OWNED SMALL BUSINESS (WOSB) ELIGIBLE UNDER THE WOMEN-OWNED SMALL BUSINESS PROGRAM h....

  6. Utility Energy Services Contracts Guide

    SciTech Connect (OSTI)

    2013-09-01

    The UESC Guide is a compilation of samples and templates developed as a resource to help contracting officers implement task orders for UESCs under existing U.S. General Services Administration areawide contracts.

  7. Performance Based Service Acquisition Toolkit

    Energy.gov [DOE]

    Performance-based Service Acquisition (PBA) means an acquisition structured around the results to be achieved as opposed to the manner by which the work is to be performed.

  8. A Two-length Scale Turbulence Model for Single-phase Multi-fluid Mixing

    DOE PAGES-Beta [OSTI]

    Schwarzkopf, J. D.; Livescu, D.; Baltzer, J. R.; Gore, R. A.; Ristorcelli, J. R.

    2015-09-08

    A two-length scale, second moment turbulence model (Reynolds averaged Navier-Stokes, RANS) is proposed to capture a wide variety of single-phase flows, spanning from incompressible flows with single fluids and mixtures of different density fluids (variable density flows) to flows over shock waves. The two-length scale model was developed to address an inconsistency present in the single-length scale models, e.g. the inability to match both variable density homogeneous Rayleigh-Taylor turbulence and Rayleigh-Taylor induced turbulence, as well as the inability to match both homogeneous shear and free shear flows. The two-length scale model focuses on separating the decay and transport length scales,more » as the two physical processes are generally different in inhomogeneous turbulence. This allows reasonable comparisons with statistics and spreading rates over such a wide range of turbulent flows using a common set of model coefficients. The specific canonical flows considered for calibrating the model include homogeneous shear, single-phase incompressible shear driven turbulence, variable density homogeneous Rayleigh-Taylor turbulence, Rayleigh-Taylor induced turbulence, and shocked isotropic turbulence. The second moment model shows to compare reasonably well with direct numerical simulations (DNS), experiments, and theory in most cases. The model was then applied to variable density shear layer and shock tube data and shows to be in reasonable agreement with DNS and experiments. Additionally, the importance of using DNS to calibrate and assess RANS type turbulence models is highlighted.« less

  9. FY 2014 Service Contract Inventory

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Analysis Plan Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2014 Department of Energy FY 2014 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)), Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories, OMB Memorandum dated November 25,

  10. Disability Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Disability Services Disability Services There are an estimated 54 million Americans with disabilities. We see them at work, on the street, in our neighborhoods. They may be sitting next to you right now, but if the disability is not obvious, you may not even know it. There are hundreds of disabilities - congenital, late-onset, progressive (cystic fibrosis, muscular dystrophy), and some are episodic (seizure conditions.) Some are permanent, such as loss of a limb, and others occur and then go

  11. Technical Services | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Technical Services Argonne National Laboratory offers a number of advanced technical capabilities to support its own research staff and researchers at other federally funded laboratories and agencies. Services that cannot be duplicated elsewhere are also made available to universities and the private sector. Three Argonne organizations are noteworthy for their unique technical capabilities: The Central Shops facility performs welding and brazing for high-vacuum applications, machining of

  12. Sample Retention Incentive Service Agreement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    : Phased Retirement Service Agreement Introduction This is an employment agreement between ____(employee's name)_____ (hereinafter referred to as "you" or "your") and the ______(Departmental element)________ (hereinafter referred to as "the employer" or Departmental element) for the purpose of the employer committing to retaining you in a phased retirement status to fulfill a critical need and, in return, your committing to a period of service to the employer. This

  13. Public Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Public Services Public Services Find out more about our work with our National Labs Saving Energy Saves You Money Find out more about how technologies move from the lab to the market For Consumers Homes Energy Efficiency 6 Smart Energy Resolutions for 2016 Appliances & Electronics 4 Ways to Slay Energy Vampires This Halloween Now's your chance to ask Energy Department experts your questions about saving energy. This month, we're answering your questions about vehicle fuel efficiency. | Photo

  14. Services Initiatives | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Initiatives Services Initiatives The Transportation Team Uses Alternative Fueled Vehicles in HQ Fleet 81% of HQ Fleet is alternative fueled (FY 2014). HQ utilizes biodiesel (B20) fueled shuttle buses, a domestic renewable fuel derived from natural oils like soybean oil. Recycled Paper for Copiers and Printers DOE Headquarters purchases a combination of 30% and 100% post-consumer recycled content paper for use in its staffed copy centers, walk-up copiers, and dedicated office printers

  15. Boyer wins Meritorious Service Award

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Boyer wins Meritorious Service Award from INMM September 5, 2013 The Institute of Nuclear Materials Management (INMM) honored Brian D. Boyer of the Laboratory's Systems Design and Analysis group at the 54th Annual Meeting with an Edway R. Johnson Meritorious Service Award for his technical research in international safeguards and his mentoring of university students and young professionals in nuclear materials management. This lifetime achievement award is a significant recognition of Boyer's

  16. U-029: TCP/IP Services for OpenVMS POP/IMAP Service Bug Lets...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9: TCPIP Services for OpenVMS POPIMAP Service Bug Lets Remote Users Gain Unauthorized Access U-029: TCPIP Services for OpenVMS POPIMAP Service Bug Lets Remote Users Gain...

  17. Task Order Awarded for Environmental Technical Services

    Energy.gov [DOE]

    Cincinnati - The Department of Energy (DOE) today awarded a task order for environmental technical services to Professional Project Services, Inc., of Oak Ridge, TN, for support services at the Paducah Gaseous Diffusion Plant located near Paducah, KY.

  18. Utility Energy Service Contracts - Lessons Learned

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Contracts-Lessons Learned Utility Energy Services Contracts Lessons Learned Water Conservation Negotiating Financing Lowering Finance Rates Utility Energy Service Contracts-Lessons Learned 2 -- FEDERAL ENERGY MANAGEMENT PROGRAM Contents Introduction .............................................................................................................................................................................3 Financing Utility Energy Services Contracts

  19. Service Center Evaluation Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Service Center Evaluation Guide Service Center Evaluation Guide To be assured of a quality product, customers of motor repair service centers need to be knowledgeable about the service they're purchasing. This guide provides information to assist in evaluating motor repair service centers. Service Center Evaluation Guide (November 1999) (1.27 MB) More Documents & Publications Selected Bibliography on Electric Motor Repair Motor Repair Tech Brief Model Repair Specifications for Low Voltage

  20. Supplemental Audit Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Supplemental Audit Services Supplemental Audit Services The Office of Procurement and Assistance Management (OPAM) awarded a contract for supplemental audit services on May 12,20 10. The purpose of this contract is to perform audit services in support of both financial assistance and contractual instrument awards department-wide. Although the focus of this contract is for auditing ARRA work, other non-ARRA auditing services may also be ordered. PF2010-57 Supplemental Audit Services (147.08 KB)

  1. Length Scale Correlations of Cellular Microstructures in Directionally Solidified Binary System

    SciTech Connect (OSTI)

    Yunxue Shen

    2002-08-01

    In a cellular array, a range of primary spacing is found to be stable under given growth conditions. Since a strong coupling of solute field exists between the neighboring cells, primary spacing variation should also influence other microstructure features such as cell shape and cell length. The existence of multiple solutions is examined in this study both theoretically as well as experimentally. A theoretical model is developed that identifies and relates four important microstructural lengths, which are found to be primary spacing, tip radius, cell width and cell length. This general microstructural relationship is shown to be valid for different cells in an array as well as for other cellular patterns obtained under different growth conditions. The unique feature of the model is that the microstructure correlation does not depend on composition or growth conditions since these variables scale microstructural lengths to satisfy the relationship obtained in this study. Detailed directional solidification experimental studies have been carried out in the succinonitrile-salol system to characterize and measure these four length scales. Besides the validation of the model, experimental results showed additional scaling laws to be present. In the regime where only a cellular structure is formed, the shape of the cell, the cell tip radius and the length of the cell are all found to scale individually with the local primary spacing. The presence of multiple solutions of primary spacing is also shown to influence the cell-dendrite transition that is controlled not only by the processing variables (growth velocity, thermal gradient and composition) but also by the local cell spacing. The cell-dendrite transition was found not to be sharp, but occurred over a range of processing conditions. Two critical conditions have been identified such that only cells are present below lower critics condition, and only dendrites are formed above the upper critics condition. Between

  2. Length Scale Correlations of Cellular Microstructures in Directionally Solidified Binary System

    SciTech Connect (OSTI)

    Yunxue Shen

    2002-06-27

    In a cellular array, a range of primary spacing is found to be stable under given growth conditions. Since a strong coupling of solute field exists between the neighboring cells, primary spacing variation should also influence other microstructure features such as cell shape and cell length. The existence of multiple solutions is examined in this study both theoretically as well as experimentally. A theoretical model is developed that identifies and relates four important microstructural lengths, which are found to be primary spacing, tip radius, cell width and cell length. This general microstructural relationship is shown to be valid for different cells in an array as well as for other cellular patterns obtained under different growth conditions. The unique feature of the model is that the microstructure correlation does not depend on composition or growth conditions since these variables scale microstructural lengths to satisfy the relationship obtained in this study. Detailed directional solidification experimental studies have been carried out in the succinonitrile-salol system to characterize and measure these four length scales. Besides the validation of the model, experimental results showed additional scaling laws to be present. In the regime where only a cellular structure is formed, the shape of the cell, the cell tip radius and the length of the cell are all found to scale individually with the local primary spacing. The presence of multiple solutions of primary spacing is also shown to influence the cell-dendrite transition that is controlled not only by the processing variables (growth velocity, thermal gradient and composition) but also by the local cell spacing. The cell-dendrite transition was found not to be sharp, but occurred over a range of processing conditions. Two critical conditions have been identified such that only cells are present below lower critics condition, and only dendrites are formed above the upper critics condition. Between

  3. Southside Thermal Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Ltd Jump to: navigation, search Name: Southside Thermal Services Ltd Place: London, Greater London, United Kingdom Zip: SW7 2AZ Product: String representation "Southside...

  4. Blue Star Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Blue Star Energy Services (Redirected from BlueStar) Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website:...

  5. Blue Star Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website: www.aepenergy.com Twitter: @aepenergy Facebook: https:...

  6. Microgy Financial Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Financial Services Inc Jump to: navigation, search Name: Microgy Financial Services Inc Place: Portsmouth, New Hampshire Zip: 3801 Product: Wholly-owned subsidiary of Environmental...

  7. Vireo Energy Financial Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Vireo Energy Financial Services Jump to: navigation, search Name: Vireo Energy Financial Services Place: Malibu, California Zip: 90265 Sector: Efficiency, Renewable Energy,...

  8. Residential Energy Services Network (RESNET) Conference | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Residential Energy Services Network (RESNET) Conference Residential Energy Services Network (RESNET) Conference February 29, 2016 9:00AM EST to March 2, 2016 5:0

  9. Direct Energy Services (Maryland) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services (Maryland) Jump to: navigation, search Name: Direct Energy Services Place: Maryland Phone Number: 1-855-461-1926 Website: www.directenergy.commaryland Twitter: https:...

  10. Acclaim Technology Services ATS | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Acclaim Technology Services ATS Jump to: navigation, search Name: Acclaim Technology Services (ATS) Place: Chennai, Tamil Nadu, India Zip: 600 028 Sector: Biomass Product:...

  11. Residential Building Industry Consulting Services | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Residential Building Industry Consulting Services Jump to: navigation, search Name: Residential Building Industry Consulting Services Place: New York, NY Information About...

  12. Champion Energy Services (Ohio) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Place: Ohio Website: www.championenergyservices.com Twitter: @ChampionEnergy Facebook: https:www.facebook.comChampionEnergyServices Outage Hotline: 877-653-5090 Outage...

  13. Hudson Energy Services (Texas) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Energy Services Place: Texas Website: www.hudsonenergy.net Twitter: @HudsonEnergy Facebook: https:www.facebook.comHudsonEnergyServices Outage Hotline: 866-552-5551...

  14. Alternative Fuels Data Center: Choice Environmental Services...

    Alternative Fuels and Advanced Vehicles Data Center

    Choice Environmental Services Chooses Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Choice Environmental Services Chooses Natural Gas on Facebook Tweet ...

  15. Pepco Energy Services ESCO Qualification Sheet

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document outlines the energy service company (ESCO) qualifications for Pepco Energy Services in relation to the U.S. Department of Energy's (DOEs) energy savings performance contracts (ESPC).

  16. ACTANOL Service Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ACTANOL Service Ltd Jump to: navigation, search Name: ACTANOL Service Ltd Place: Munich, Germany Product: Provider of alternative energy and biofuel plant solutions. Coordinates:...

  17. Phoenix Geothermal Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Phoenix Geothermal Services Jump to: navigation, search Name: Phoenix Geothermal Services Place: Auburn, New York Sector: Geothermal energy Product: Designer, developer, and...

  18. Ewing Land Development Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Ewing Land Development Services Jump to: navigation, search Name: Ewing Land Development & Services Place: Pella, Iowa Zip: 50219 Product: Real estate development company...

  19. Assistant Manager for Safety and Technical Services

    Energy.gov [DOE]

    A successful candidate in this position will provide overall executive leadership to the Office of the Assistant Manager for Safety and Technical Services, which provides technical services and...

  20. shipping and Receiving Services | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    (your name) ISU Campus, 2405 Kooser Dr. Ames, IA 50011-3020 Services: Shipping Orders Packaging Services Pool Eqpt. Area (reutilization) Receiving Hold Eqpt. Area (for future...

  1. Biomass Energy Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Inc Jump to: navigation, search Name: Biomass Energy Services Inc Place: Tifton, Georgia Zip: 31794 Product: Biodiesel plant developer in Cordele, Georgia. References:...

  2. Utility Energy Service Contracts: Enabling Documents | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Service Contracts: Enabling Documents Utility Energy Service Contracts: Enabling Documents Document provides a select set of background information materials that clarify the ...

  3. Voluntary Protection Program Onsite Review, Wackenhut Services...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review, Wackenhut Services, Incorporated - Nevada - May 2008 Voluntary Protection Program Onsite Review, Wackenhut Services, Incorporated - Nevada - May 2008 May 2008 Evaluation to ...

  4. Sandia National Laboratories: Products and Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Products and Services Opportunities Potential Suppliers Current Suppliers What Does Sandia Buy? Products and Services Stimulus Spending (ARRA Funded Expenditures) Just in Time...

  5. Cinco Renewable Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Renewable Energy Services Jump to: navigation, search Name: Cinco Renewable Energy Services Address: 9235 Katy Freeway Place: Houston, Texas Zip: 77024 Region: Texas Area Sector:...

  6. Prometheus Energy Services LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Energy Services LLC Jump to: navigation, search Name: Prometheus Energy Services LLC Place: California Sector: Wind energy Product: Wind project developer, working on the Pine Tree...

  7. Customer Services Handbook, Office of Administration

    Energy.gov [DOE]

    Information on the employee services offered by the Office of Administration are available through the Office of Management, Employee Services web page.

  8. FPL Energy Services ESCO Qualification Sheet

    Energy.gov [DOE]

    Document outlines the energy service company (ESCO) qualifications for FPL Energy Services in relation to the U.S. Department of Energy's (DOEs) energy savings performance contract (ESPC).

  9. Selective Service Registration | Department of Energy

    Office of Environmental Management (EM)

    Selective Service Registration Selective Service Registration (19.13 KB) More Documents & Publications Employee In-Processing Forms New Employee Orientation - Forms Checklist NTSF ...

  10. Excepted Service Authority for Exceptionally Well Qualified ...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Authority for Exceptionally Well Qualified (EWQ) EQ Pay Plan Employees by Erin Moore Functional areas: Excepted Service, EWQ Pay Plan Employees The order establishes...

  11. Customer Services Handbook, 2010, Office of Administration |...

    Energy.gov (indexed) [DOE]

    Customer Services Handbook Customer Services Handbook, 2010, Office of Administration (1.99 MB) More Documents & Publications HQ FNVA Questionnaire Property Representatives Lists - ...

  12. Montana Natural Resources Conservation Service Webpage | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Service Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana Natural Resources Conservation Service Webpage Abstract USDA's webpage...

  13. Geotech Logging Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Logging Services Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Geotech Logging Services Author Geotech Logging Servces LLC Published Publisher...

  14. Hanford Waste Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Hanford Waste Services Ltd Jump to: navigation, search Name: Hanford Waste Services Ltd. Place: Wolverhampton, United Kingdom Zip: Wv2 1HR Product: Waste to Energy facility with...

  15. ORISE Resources: Consumer Health Resource Information Service...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Consumer Health Resource Information Service (CHRIS) guide The Consumer Health Resource Information Service (CHRIS) guide for faith-based organizations and communities was...

  16. Amana Society Service Co | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Amana Society Service Co Jump to: navigation, search Name: Amana Society Service Co Place: Iowa Phone Number: (319) 622-3052 Website: www.amanasociety.comservices. Outage Hotline:...

  17. Duke Energy Generation Services formerly Cinergy Solutions |...

    Open Energy Information (Open El) [EERE & EIA]

    Generation Services formerly Cinergy Solutions Jump to: navigation, search Name: Duke Energy Generation Services (formerly Cinergy Solutions) Place: Cincinatti, Ohio Zip: 45202...

  18. Weather Services International Corporation WSI | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Weather Services International Corporation WSI Jump to: navigation, search Name: Weather Services International Corporation (WSI) Place: Andover, Massachusetts Zip: 1810 Product:...

  19. PEPCO Energy Services (Texas) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    PEPCO Energy Services (Texas) Jump to: navigation, search Name: PEPCO Energy Services Place: Texas Website: www.pepcoenergy.com References: EIA Form EIA-861 Final Data File for...

  20. Raton Public Service Company | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Raton Public Service Company Jump to: navigation, search Name: Raton Public Service Company Place: New Mexico Phone Number: (575) 445-8723 Outage Hotline: (575) 445-8723...

  1. Nashville Electric Service NES | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Electric Service (NES) Place: Nashville, Tennessee Zip: 37246 Product: Nashville Electric Service (NES), the 12th largest public utility in the US, distributes electrical energy to...

  2. Southwestern Public Service Company | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Southwestern Public Service Company Place: AMARILLO, Texas Zip: 79101 Product: Xcel's regulated operating company. References: Southwestern Public Service Company1 This article...

  3. Residential Energy Efficiency Customer Service Best Practices...

    Energy Savers

    Customer Service Best Practices Residential Energy Efficiency Customer Service Best Practices Better Buildings Residential Network Peer Exchange Call Series: Residential Energy ...

  4. AWARD FEE DETERMINATION SCORECARD Contractor: Restoration Services...

    Office of Environmental Management (EM)

    Basis of Evaluation: FY14 Award Fee Plan for Restoration Services, Inc.; Portsmouth Environmental Technical Services II Award Fee Available: 349,708.00 Award Fee Earned:...

  5. 3 Phases Energy Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Phases Energy Services Jump to: navigation, search Name: 3 Phases Energy Services Place: California Phone Number: 310.939.1283 Website: 3phasesrenewables.comindex.ht Outage...

  6. Ningxia CDM Service Center | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Zip: 750001 Product: Ningxia CDM Service Center is a consulting service provider for Chinese CDM projects based in the Ningxia Autonomous Region. Coordinates: 38.467899,...

  7. Nashville Electric Service | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Nashville Electric Service Jump to: navigation, search Name: Nashville Electric Service Place: Tennessee Phone Number: 615-736-6900 Website: www.nespower.com Twitter: @nespower...

  8. Measurements of 3D slip velocities and plasma column lengths of a gliding arc discharge

    SciTech Connect (OSTI)

    Zhu, Jiajian; Gao, Jinlong; Ehn, Andreas; Aldn, Marcus; Li, Zhongshan E-mail: alpers@ma.tum.de; Moseev, Dmitry; Kusano, Yukihiro; Salewski, Mirko; Alpers, Andreas E-mail: alpers@ma.tum.de; Gritzmann, Peter; Schwenk, Martin

    2015-01-26

    A non-thermal gliding arc discharge was generated at atmospheric pressure in an air flow. The dynamics of the plasma column and tracer particles were recorded using two synchronized high-speed cameras. Whereas the data analysis for such systems has previously been performed in 2D (analyzing the single camera image), we provide here a 3D data analysis that includes 3D reconstructions of the plasma column and 3D particle tracking velocimetry based on discrete tomography methods. The 3D analysis, in particular, the determination of the 3D slip velocity between the plasma column and the gas flow, gives more realistic insight into the convection cooling process. Additionally, with the determination of the 3D slip velocity and the 3D length of the plasma column, we give more accurate estimates for the drag force, the electric field strength, the power per unit length, and the radius of the conducting zone of the plasma column.

  9. Effective defect diffusion lengths in Ar-ion bombarded 3C-SiC

    DOE PAGES-Beta [OSTI]

    Bayu Aji, L. B.; Wallace, J. B.; Shao, L.; Kucheyev, S. O.

    2016-04-14

    Above room temperature, SiC exhibits pronounced processes of diffusion and interaction of radiation-generated point defects. Here, we use the recently developed pulsed ion beam method to measure effective defect diffusion lengths in 3C-SiC bombarded in the temperature range of 25–200 °C with 500 keV Ar ions. Results reveal a diffusion length of ~10 nm, which exhibits a weak temperature dependence, changing from 9 to 13 nm with increasing temperature. Lastly, these results have important implications for understanding and predicting radiation damage in SiC and for the development of radiation-resistant materials via interface-mediated defect reactions.

  10. LOCA rupture strains and coolability of full-length PWR fuel bundles

    SciTech Connect (OSTI)

    Mohr, C.L.; Hesson, G.M.

    1983-03-01

    The LOCA Simulation Program tests sponsored by the United States Nuclear Regulatory Commission are the first full-length nuclear-heated experiments designed to investigate the deformation and rupture characteristics as well as the coolability of nuclear-heated fuel under accident conditions. The results of the seven tests preformed in the program using 32-rod full-length PWR fuel bundles have shown that for a wide range of flow blockage condtions no significant reduction in coolability of the fuel bundle could be found. These results have been confirmed by data from out-of-pile electrically-heated experiments. Although there is a difference between nuclear and electrically-heated test data, the conclusion is still the same. Coolability of a deformed bundle during reflood is dominated by the dispersion of droplets in the deformed zone which provides adequate cooling and which is not reduced by the deformation of the fuel rod cladding.

  11. Full-length high-temperature severe fuel damage test No. 1

    SciTech Connect (OSTI)

    Rausch, W.N.; Hesson, G.M.; Pilger, J.P.; King, L.L.; Goodman, R.L.; Panisko, F.E.

    1993-08-01

    This report describes the first full-length high-temperature test (FLHT-1) performed by Pacific Northwest Laboratory (PNL) in the National Research Universal (NRU) reactor at Chalk River, Ontario, Canada. The test is part of a series of experiments being performed for the NRC as a part of their Severe Fuel Damage Program and is one of several planned for PNL`s Coolant Boilaway and Damage Progression Program. The report summarizes the test design and test plan. it also provides a summary and discussion of the data collected during the test and of the photos taken during the post-test examination. All objectives for the test were met. The key objective was to demonstrate that severe fuel damage tests on full-length fuel bundles can be safely conducted in the NRU reactor.

  12. Three-body Recombination in Bose Gases with Large Scattering Length

    SciTech Connect (OSTI)

    Bedaque, P. F.; Braaten, Eric; Hammer, H.-W.

    2000-07-31

    An effective field theory for the three-body system with large scattering length is applied to three-body recombination to a weakly bound s -wave state in a Bose gas. Our model independent analysis demonstrates that the three-body recombination constant {alpha} is not universal, but can take any value between zero and 67.9({Dirac_h}/2{pi})a{sup 4}/m , where a is the scattering length. Other low-energy three-body observables can be predicted in terms of a and {alpha} . Near a Feshbach resonance, {alpha} should oscillate between those limits as the magnetic field B approaches the point where a{yields}{infinity} . In any interval of B over which a increases by a factor of 22.7, {alpha} should have a zero. (c) 2000 The American Physical Society.

  13. Calculation of the Beam Field in the LCLS Bunch Length Monitor

    SciTech Connect (OSTI)

    Stupakov, G.; Ding, Y.; Huang, Z.; /SLAC

    2006-06-07

    Maintaining a stable bunch length and peak current is a critical step for the reliable operation of a SASE based x-ray source. In the LCLS, relative bunch length monitors (BLM) right after both bunch compressors are proposed based on the coherent radiation generated by the short electron bunch. Due to its diagnostic setup, the standard far field synchrotron radiation formula and well-developed numerical codes do not apply for the analysis of the BLM performance. In this paper, we develop a calculation procedure to take into account the near field effect, the effect of a short bending magnet, and the diffraction effect of the radiation transport optics. We find the frequency response of the BLM after the first LCLS bunch compressor and discuss its expected performance.

  14. Simulating the Effect of Modulated Tool-Path Chip Breaking On Surface Texture and Chip Length

    SciTech Connect (OSTI)

    Smith, K.S.; McFarland, J.T.; Tursky, D. A.; Assaid, T. S.; Barkman, W. E.; Babelay, Jr., E. F.

    2010-04-30

    One method for creating broken chips in turning processes involves oscillating the cutting tool in the feed direction utilizing the CNC machine axes. The University of North Carolina at Charlotte and the Y-12 National Security Complex have developed and are refining a method to reliably control surface finish and chip length based on a particular machine's dynamic performance. Using computer simulations it is possible to combine the motion of the machine axes with the geometry of the cutting tool to predict the surface characteristics and map the surface texture for a wide range of oscillation parameters. These data allow the selection of oscillation parameters to simultaneously ensure broken chips and acceptable surface characteristics. This paper describes the machine dynamic testing and characterization activities as well as the computational method used for evaluating and predicting chip length and surface texture.

  15. Effects of Nanoparticle Morphology and Acyl Chain Length on Spontaneous Lipid Transfer Rates

    DOE PAGES-Beta [OSTI]

    Xia, Yan; Li, Ming; Charubin, Kamil; Liu, Ying; Heberle, Frederick A.; Katsaras, John; Jing, Benxin; Zhu, Yingxi; Nieh, Mu-Ping

    2015-11-05

    In this paper, we report on studies of lipid transfer rates between different morphology nanoparticles and lipids with different length acyl chains. The lipid transfer rate of dimyristoylphosphatidylcholine (di-C14, DMPC) in discoidal “bicelles” (0.156 h–1) is 2 orders of magnitude greater than that of DMPC vesicles (ULVs) (1.1 × 10–3 h–1). For both bicellar and ULV morphologies, increasing the acyl chain length by two carbons [going from di-C14 DMPC to di-C16, dipalmitoylphosphatidylcholine (DPPC)] causes lipid transfer rates to decrease by more than 2 orders of magnitude. Results from small angle neutron scattering (SANS), differential scanning calorimetry (DSC), and fluorescence correlationmore » spectroscopy (FCS) are in good agreement. Finally, the present studies highlight the importance of lipid dynamic processes taking place in different morphology biomimetic membranes.« less

  16. Bunch length effects in the beam-beam compensation with an electron lens

    SciTech Connect (OSTI)

    Fischer, W.; Luo, Y.; Montag, C.

    2010-02-25

    Electron lenses for the head-on beam-beam compensation are under construction at the Relativistic Heavy Ion Collider. The bunch length is of the same order as the {beta}-function at the interaction point, and a proton passing through another proton bunch experiences a substantial phase shift which modifies the beam-beam interaction. We review the effect of the bunch length in the single pass beam-beam interaction, apply the same analysis to a proton passing through a long electron lens, and study the single pass beam-beam compensation with long bunches. We also discuss the beam-beam compensation of the electron beam in an electron-ion collider ring.

  17. Effects of Nanoparticle Morphology and Acyl Chain Length on Spontaneous Lipid Transfer Rates

    SciTech Connect (OSTI)

    Xia, Yan; Li, Ming; Charubin, Kamil; Liu, Ying; Heberle, Frederick A.; Katsaras, John; Jing, Benxin; Zhu, Yingxi; Nieh, Mu-Ping

    2015-11-05

    In this paper, we report on studies of lipid transfer rates between different morphology nanoparticles and lipids with different length acyl chains. The lipid transfer rate of dimyristoylphosphatidylcholine (di-C14, DMPC) in discoidal “bicelles” (0.156 h–1) is 2 orders of magnitude greater than that of DMPC vesicles (ULVs) (1.1 × 10–3 h–1). For both bicellar and ULV morphologies, increasing the acyl chain length by two carbons [going from di-C14 DMPC to di-C16, dipalmitoylphosphatidylcholine (DPPC)] causes lipid transfer rates to decrease by more than 2 orders of magnitude. Results from small angle neutron scattering (SANS), differential scanning calorimetry (DSC), and fluorescence correlation spectroscopy (FCS) are in good agreement. Finally, the present studies highlight the importance of lipid dynamic processes taking place in different morphology biomimetic membranes.

  18. Contact resistance improvement by the modulation of peripheral length to area ratio of graphene contact pattern

    SciTech Connect (OSTI)

    Cho, Chunhum; Lee, Sangchul; Lee, Sang Kyung; Noh, Jin Woo; Park, Woojin; Lee, Young Gon; Hwang, Hyeon Jun; Ham, Moon-Ho; Kang, Chang Goo; Lee, Byoung Hun

    2015-05-25

    High contact resistance between graphene and metal is a major huddle for high performance electronic device applications of graphene. In this work, a method to improve the contact resistance of graphene is investigated by varying the ratio of peripheral length and area of graphene pattern under a metal contact. The contact resistance decreased to 0.8 kΩ·μm from 2.1 kΩ·μm as the peripheral length increased from 312 to 792 μm. This improvement is attributed to the low resistivity of edge-contacted graphene, which is 8.1 × 10{sup 5} times lower than that of top-contacted graphene.

  19. Improved efficiency of photoconductive THz emitters by increasing the effective contact length of electrodes

    SciTech Connect (OSTI)

    Singh, Abhishek; Surdi, Harshad; Nikesh, V. V.; Prabhu, S. S.; Döhler, G. H.

    2013-12-15

    We study the effect of a surface modification at the interface between metallic electrodes and semiconducting substrate in Semi-Insulating GaAs (SI-GaAs) based photoconductive emitters (PCE) on the emission of Tera-Hertz (THz) radiation. We partially etch out a 500 nm thick layer of SI-GaAs in grating like pattern with various periods before the contact deposition. By depositing the electrodes on the patterned surface, the electrodes follow the contour of the grating period. This increases the effective contact length of the electrodes per unit area of the active regions on the PCE. The maxima of the electric field amplitude of the THz pulses emitted from the patterned surface are enhanced by up to more than a factor 2 as compared to an un-patterned surface. We attribute this increase to the increase of the effective contact length of the electrode due to surface patterning.

  20. Full-length high-temperature severe fuel damage test No. 2. Final safety analysis

    SciTech Connect (OSTI)

    Hesson, G.M.; Lombardo, N.J.; Pilger, J.P.; Rausch, W.N.; King, L.L.; Hurley, D.E.; Parchen, L.J.; Panisko, F.E.

    1993-09-01

    Hazardous conditions associated with performing the Full-Length High- Temperature (FLHT). Severe Fuel Damage Test No. 2 experiment have been analyzed. Major hazards that could cause harm or damage are (1) radioactive fission products, (2) radiation fields, (3) reactivity changes, (4) hydrogen generation, (5) materials at high temperature, (6) steam explosion, and (7) steam pressure pulse. As a result of this analysis, it is concluded that with proper precautions the FLHT- 2 test can be safely conducted.

  1. Linac Coherent Light Source (LCLS) Bunch-Length Monitor using Coherent Radiation

    SciTech Connect (OSTI)

    Wu, Juhao; Emma, P.; /SLAC

    2007-03-21

    The Linac Coherent Light Source (LCLS) is a SASE x-ray Free-Electron Laser (FEL) based on the final kilometer of the Stanford Linear Accelerator. One of the most critical diagnostic devices is the bunch length monitor (BLM), which is to be installed right after each compressor utilizing coherent radiation from the last bending magnet. We describe the components and the optical layout of such a BLM. Based on the setup geometry, we discuss some issues about the coherent radiation signal.

  2. Charge transfer fluorescence and 34 nm exciton diffusion length in polymers with electron acceptor end traps

    DOE PAGES-Beta [OSTI]

    Zaikowski, Lori; Mauro, Gina; Bird, Matthew; Karten, Brianne; Asaoka, Sadayuki; Wu, Qin; Cook, Andrew R.; Miller, John R.

    2014-12-22

    Photoexcitation of conjugated poly-2,7-(9,9-dihexylfluorene) polyfluorenes with naphthylimide (NI) and anthraquinone (AQ) electron-acceptor end traps produces excitons that form charge transfer states at the end traps. Intramolecular singlet exciton transport to end traps was examined by steady state fluorescence for polyfluorenes of 17 to 127 repeat units in chloroform, dimethylformamide (DMF), tetrahydrofuran (THF), and p-xylene. End traps capture excitons and form charge transfer (CT) states at all polymer lengths and in all solvents. The CT nature of the end-trapped states is confirmed by their fluorescence spectra, solvent and trap group dependence and DFT descriptions. Quantum yields of CT fluorescence are asmore » large as 46%. This strong CT emission is understood in terms of intensity borrowing. Energies of the CT states from onsets of the fluorescence spectra give the depths of the traps which vary with solvent polarity. For NI end traps the trap depths are 0.06 (p-xylene), 0.13 (THF) and 0.19 eV (CHCl3). For AQ, CT fluorescence could be observed only in p-xylene where the trap depth is 0.27 eV. Quantum yields, emission energies, charge transfer energies, solvent reorganization and vibrational energies were calculated. Fluorescence measurements on chains >100 repeat units indicate that end traps capture ~50% of the excitons, and that the exciton diffusion length LD =34 nm, which is much larger than diffusion lengths reported in polymer films or than previously known for diffusion along isolated chains. As a result, the efficiency of exciton capture depends on chain length, but not on trap depth, solvent polarity or which trap group is present.« less

  3. Charge Transfer Fluorescence and 34 nm Exciton Diffusion Length in Polymers with Electron Acceptor End Traps

    SciTech Connect (OSTI)

    Zaikowski, L.; Mauro, G.; Bird, M.; Karten, B.; Asaoka, S.; Wu, Q.; Cook, A. R.; Miller, J.

    2014-12-22

    Photoexcitation of conjugated poly-2,7-(9,9-dihexylfluorene) polyfluorenes with naphthylimide (NI) and anthraquinone (AQ) electron-acceptor end traps produces excitons that form charge transfer states at the end traps. Intramolecular singlet exciton transport to end traps was examined by steady state fluorescence for polyfluorenes of 17 to 127 repeat units in chloroform, dimethylformamide (DMF), tetrahydrofuran (THF), and p-xylene. End traps capture excitons and form charge transfer (CT) states at all polymer lengths and in all solvents. The CT nature of the end-trapped states is confirmed by their fluorescence spectra, solvent and trap group dependence and DFT descriptions. Quantum yields of CT fluorescence are as large as 46%. This strong CT emission is understood in terms of intensity borrowing. Energies of the CT states from onsets of the fluorescence spectra give the depths of the traps which vary with solvent polarity. For NI end traps the trap depths are 0.06 (p-xylene), 0.13 (THF) and 0.19 eV (CHCl3). For AQ, CT fluorescence could be observed only in p-xylene where the trap depth is 0.27 eV. Quantum yields, emission energies, charge transfer energies, solvent reorganization and vibrational energies were calculated. Fluorescence measurements on chains >100 repeat units indicate that end traps capture ~50% of the excitons, and that the exciton diffusion length LD =34 nm, which is much larger than diffusion lengths reported in polymer films or than previously known for diffusion along isolated chains. The efficiency of exciton capture depends on chain length, but not on trap depth, solvent polarity or which trap group is present.

  4. Study of minority carrier diffusion lengths in photoactive layers of multijunction solar cells

    SciTech Connect (OSTI)

    Mintairov, S. A. Andreev, V. M.; Emelyanov, V. M.; Kalyuzhnyy, N. A.; Timoshina, N. K.; Shvarts, M. Z.; Lantratov, V. M.

    2010-08-15

    A technique for determining a minority carrier's diffusion length in photoactive III-V layers of solar cells by approximating their spectral characteristics is presented. Single-junction GaAs, Ge and multi-junction GaAs/Ge, GaInP/GaAs, and GaInP/GaInAs/Ge solar cells fabricated by hydride metal-organic vapor-phase epitaxy (H-MOVPE) have been studied. The dependences of the minority carrier diffusion length on the doping level of p-Ge and n-GaAs are determined. It is shown that the parameters of solid-state diffusion of phosphorus atoms to the p-Ge substrate from the n-GaInP nucleation layer are independent of the thickness of the latter within 35-300 nm. It is found that the diffusion length of subcells of multijunction structures in Ga(In)As layers is smaller in comparison with that of single-junction structures.

  5. Crystallization and X-ray structure of full-length recombinant human butyrylcholinesterase

    SciTech Connect (OSTI)

    Ngamelue, Michelle N.; Homma, Kohei; Lockridge, Oksana; Asojo, Oluwatoyin A.

    2007-09-01

    The first crystals and the 2.8 Å X-ray structure of full-length recombinant human butyrylcholinesterase are reported. Human butyrylcholinesterase (BChE) has been shown to function as an endogenous scavenger of diverse poisons. BChE is a 340 kDa tetrameric glycoprotein that is present in human serum at a concentration of 5 mg l{sup −1}. The well documented therapeutic effects of BChE on cocaine toxicity and organophosphorus agent poisoning has increased the need for effective methods of producing recombinant therapeutic BChE. In order to be therapeutically useful, BChE must have a long circulatory residence time or associate as tetramers. Full-length recombinant BChE produced in Chinese hamster ovary (CHO) cells or human embryonic kidney cells has been shown to associate as monomers, with a shorter circulatory residence time than the naturally occurring tetrameric serum protein. Based on the preceding observation as well as the need to develop novel methodologies to facilitate the mass production of therapeutic recombinant BChE, studies have been initiated to determine the structural basis of tetramer formation. Towards these ends, full-length monomeric recombinant BChE has been crystallized for the first time. A 2.8 Å X-ray structure was solved in space group P42{sub 1}2, with unit-cell parameters a = b = 156, c = 146 Å.

  6. Elementary excitations and universal interaction in Bose-Einstein condensates at large scattering lengths

    SciTech Connect (OSTI)

    Sarjonen, R.; Saarela, M.; Mazzanti, F.

    2011-10-15

    We present a theoretical analysis of excitation modes in Bose-Einstein condensates of ultracold alkali-metal gases for large scattering lengths, showing clear deviations from the Bogoliubov prediction as seen by Papp et al.[Phys. Rev. Lett. 101, 135301 (2008)]. We construct the atom-atom interaction by deriving the T matrix of such systems from two coupled (open and closed) channels assuming that the Feshbach resonance dominates the latter. We calculate molecular bound-state energies as a function of the magnetic field and compare with available experiments. The s-wave phase shifts determine the local effective interaction with long-ranged repulsion and short-ranged attraction. We show that it becomes a universal function at large scattering lengths. Finally, we use this interaction to characterize the ground-state and elementary excitations of {sup 85}Rb, {sup 87}Rb, and {sup 23}Na gases. Good agreement with line shift experiments in {sup 85}Rb is achieved. We find that, at large scattering lengths, Bragg scattering experiments could directly measure the momentum dependence of the effective two-body potential.

  7. Effects of Coaxial Air on Nitrogen-Diluted Hydrogen Jet Diffusion Flame Length and NOx Emission

    SciTech Connect (OSTI)

    Weiland, N.T.; Chen, R.-H.; Strakey, P.A.

    2007-10-01

    Turbulent nitrogen-diluted hydrogen jet diffusion flames with high velocity coaxial air flows are investigated for their NOx emission levels. This study is motivated by the DOE turbine programs goal of achieving 2 ppm dry low NOx from turbine combustors running on nitrogen-diluted high-hydrogen fuels. In this study, effects of coaxial air velocity and momentum are varied while maintaining low overall equivalence ratios to eliminate the effects of recirculation of combustion products on flame lengths, flame temperatures, and resulting NOx emission levels. The nature of flame length and NOx emission scaling relationships are found to vary, depending on whether the combined fuel and coaxial air jet is fuel-rich or fuel-lean. In the absence of differential diffusion effects, flame lengths agree well with predicted trends, and NOx emissions levels are shown to decrease with increasing coaxial air velocity, as expected. Normalizing the NOx emission index with a flame residence time reveals some interesting trends, and indicates that a global flame strain based on the difference between the fuel and coaxial air velocities, as is traditionally used, is not a viable parameter for scaling the normalized NOx emissions of coaxial air jet diffusion flames.

  8. Method and apparatus for determining minority carrier diffusion length in semiconductors

    DOE Patents [OSTI]

    Goldstein, Bernard; Dresner, Joseph; Szostak, Daniel J.

    1983-07-12

    Method and apparatus are provided for determining the diffusion length of minority carriers in semiconductor material, particularly amorphous silicon which has a significantly small minority carrier diffusion length using the constant-magnitude surface-photovoltage (SPV) method. An unmodulated illumination provides the light excitation on the surface of the material to generate the SPV. A manually controlled or automatic servo system maintains a constant predetermined value of the SPV. A vibrating Kelvin method-type probe electrode couples the SPV to a measurement system. The operating optical wavelength of an adjustable monochromator to compensate for the wavelength dependent sensitivity of a photodetector is selected to measure the illumination intensity (photon flux) on the silicon. Measurements of the relative photon flux for a plurality of wavelengths are plotted against the reciprocal of the optical absorption coefficient of the material. A linear plot of the data points is extrapolated to zero intensity. The negative intercept value on the reciprocal optical coefficient axis of the extrapolated linear plot is the diffusion length of the minority carriers.

  9. Single-shot electron bunch length measurements using a spatial electro-optical autocorrelation interferometer

    SciTech Connect (OSTI)

    Suetterlin, Daniel; Erni, Daniel; Schlott, Volker; Sigg, Hans; Jaeckel, Heinz; Murk, Axel

    2010-10-15

    A spatial, electro-optical autocorrelation (EOA) interferometer using the vertically polarized lobes of coherent transition radiation (CTR) has been developed as a single-shot electron bunch length monitor at an optical beam port downstream the 100 MeV preinjector LINAC of the Swiss Light Source. This EOA monitor combines the advantages of step-scan interferometers (high temporal resolution) [D. Mihalcea et al., Phys. Rev. ST Accel. Beams 9, 082801 (2006) and T. Takahashi and K. Takami, Infrared Phys. Technol. 51, 363 (2008)] and terahertz-gating technologies [U. Schmidhammer et al., Appl. Phys. B: Lasers Opt. 94, 95 (2009) and B. Steffen et al., Phys. Rev. ST Accel. Beams 12, 032802 (2009)] (fast response), providing the possibility to tune the accelerator with an online bunch length diagnostics. While a proof of principle of the spatial interferometer was achieved by step-scan measurements with far-infrared detectors, the single-shot capability of the monitor has been demonstrated by electro-optical correlation of the spatial CTR interference pattern with fairly long (500 ps) neodymium-doped yttrium aluminum garnet (Nd:YAG) laser pulses in a ZnTe crystal. In single-shot operation, variations of the bunch length between 1.5 and 4 ps due to different phase settings of the LINAC bunching cavities have been measured with subpicosecond time resolution.

  10. Field measurements to support IAEA procedures development for fuel assembly and fuel rod active length verification

    SciTech Connect (OSTI)

    Belew, W.L.; Cooley, J.N.; Whitaker, J.M.

    1992-07-17

    The activities performed in verification of reactor fuel rods and assemblies by International Atomic Energy Agency (IAEA) safeguards inspectors include measurements of the length of the enriched uranium sections in fuel assemblies and fuel rods. These measurements are normally made with the IAEA hand-held gamma monitor (HM-4) on fuel elements containing only enriched uranium. Many fuel rods currently in use contain natural uranium end sections and several different [sup 235]U enrichment zones. To support development of standard procedures for IAEA nondestructive assay (NDA) measurements, a field measurement campaign was carried out to evaluate the FM-4 measurements and to investigate the feasibility of extending the HM-4 measurements to fuel rods and assemblies containing both natural and enriched uranium sections. The results show that the enriched fuel length can be measured to within [plus minus] 1 to 2 cm in the presence of natural uranium sections and to within [plus minus] 0.5 = when only enriched uranium is present. Based on the results from these measurements, a standard procedure, Measurement of Active Fuel Length in Fuel Assemblies and Fuel Rods Using the HM-4,'' has been drafted for review by the IAEA.

  11. Field measurements to support IAEA procedures development for fuel assembly and fuel rod active length verification

    SciTech Connect (OSTI)

    Belew, W.L.; Cooley, J.N.; Whitaker, J.M.

    1992-07-17

    The activities performed in verification of reactor fuel rods and assemblies by International Atomic Energy Agency (IAEA) safeguards inspectors include measurements of the length of the enriched uranium sections in fuel assemblies and fuel rods. These measurements are normally made with the IAEA hand-held gamma monitor (HM-4) on fuel elements containing only enriched uranium. Many fuel rods currently in use contain natural uranium end sections and several different {sup 235}U enrichment zones. To support development of standard procedures for IAEA nondestructive assay (NDA) measurements, a field measurement campaign was carried out to evaluate the FM-4 measurements and to investigate the feasibility of extending the HM-4 measurements to fuel rods and assemblies containing both natural and enriched uranium sections. The results show that the enriched fuel length can be measured to within {plus_minus} 1 to 2 cm in the presence of natural uranium sections and to within {plus_minus} 0.5 = when only enriched uranium is present. Based on the results from these measurements, a standard procedure, ``Measurement of Active Fuel Length in Fuel Assemblies and Fuel Rods Using the HM-4,`` has been drafted for review by the IAEA.

  12. Long Length Contaminated Equipment Retrieval System Receiver Trailer and Transport Trailer Operations and Maintenance Manual

    SciTech Connect (OSTI)

    DALE, R.N.

    2000-05-01

    A system to accommodate the removal of long-length contaminated equipment (LLCE) from Hanford underground radioactive waste storage tanks was designed, procured, and demonstrated, via a project activity during the 1990s. The system is the Long Length Contaminated Equipment Removal System (LLCERS). LLCERS will be maintained and operated by Tank Farms Engineering and Operations organizations and other varied projects having a need for the system. The responsibility for the operation and maintenance of the LLCERS Receiver Trailer (RT) and Transport Trailer (TT) resides with the RPP Characterization Project Operations organization. The purpose of this document is to provide vendor supplied operating and maintenance (O & M) information for the RT and TT in a readily retrievable form. This information is provided this way instead of in a vendor information (VI) file to maintain configuration control of the operations baseline as described in RPP-6085, ''Configuration Management Plan for Long Length Contaminated Equipment Receiver and Transport Trailers''. Additional Operations Baseline documents are identified in RPP-6085.

  13. Demand Response for Ancillary Services

    SciTech Connect (OSTI)

    Alkadi, Nasr E; Starke, Michael R

    2013-01-01

    Many demand response resources are technically capable of providing ancillary services. In some cases, they can provide superior response to generators, as the curtailment of load is typically much faster than ramping thermal and hydropower plants. Analysis and quantification of demand response resources providing ancillary services is necessary to understand the resources economic value and impact on the power system. Methodologies used to study grid integration of variable generation can be adapted to the study of demand response. In the present work, we describe and illustrate a methodology to construct detailed temporal and spatial representations of the demand response resource and to examine how to incorporate those resources into power system models. In addition, the paper outlines ways to evaluate barriers to implementation. We demonstrate how the combination of these three analyses can be used to translate the technical potential for demand response providing ancillary services into a realizable potential.

  14. Midwest Renewable Energy Services LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services LLC Jump to: navigation, search Name: Midwest Renewable Energy Services LLC Place: Florida Zip: FL 33408 Sector: Services, Wind energy Product: MRE Services provides...

  15. T-663: Cisco Content Services Gateway ICMP Processing Flaw Lets...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3: Cisco Content Services Gateway ICMP Processing Flaw Lets Remote Users Deny Service T-663: Cisco Content Services Gateway ICMP Processing Flaw Lets Remote Users Deny Service July...

  16. Assessment of Possible Cycle Lengths for Fully Encapsulated Microstructure fueled light water reactor Concepts

    SciTech Connect (OSTI)

    R. Sonat Sen; Michael A. Pope; Abderrafi M. Ougouag; Kemal O. Pasamehmetoglu

    2013-02-01

    The use of TRISO-particle-based dispersion fuel within SiC matrix and cladding materials has the potential to allow the design of extremely safe LWRs with failure-proof fuel. This paper examines the feasibility of LWR-like cycle length for such fuel with the imposed constraint of strictly retaining the original geometry of the fuel pins and assemblies. The motivation for retaining the original geometry is to provide the ability to incorporate the fuel as-is into existing LWRs while retaining their thermalhydraulic characteristics. Another mandatory constraint is use of low enriched uranium (at or below 20 w/o). The feasibility of using this fuel is assessed by looking at two factors: cycle lengths and fuel material failure rates. Other considerations (e.g., safety parameters such as reactivity coefficients, feedback, etc.) were not considered at this stage of the study. The study includes the examination of increases in the TRISO kernel sizes without changing the thickness of any of the coating layers. In addition, cases where the buffer layer thickness is allowed to vary are also considered. The study shows that a nave use of UO2 (even up to 20 w/o enrichment) results in cycle lengths too short to be practical for existing LWR designs and operational demands. Increasing fissile inventory within the fuel compacts shows that acceptable cycle lengths can be achieved. The increase of fissile inventory can be accomplished through multiple means, including higher particle packing fraction, higher enrichment, larger fuel kernel sizes, and the use of higher density fuels (that contain a higher number of U atoms per unit volume). In this study, starting with the recognized highest packing fraction practically achievable (44%), combinations of the other means have been evaluated. The models demonstrate cycle lengths comparable to those of ordinary LWRs. As expected, TRISO particles with extremely large kernels are shown to fail under all considered scenarios. In

  17. Well completion and servicing fluid

    SciTech Connect (OSTI)

    Grimsley, R.L.

    1990-09-25

    This patent describes a well completion servicing fluid for controlling formation pressure during completion or servicing of a well. It comprises: an aqueous solution of calcium chloride, a solid weighing agent suspended in the solution and being selected from the group consisting of zinc, zinc oxide, and mixtures thereof; and a viscosifier dissolved in the solution in an amount effective to suspend the weighing agent. The fluid has a density of greater than 15 pounds per gallon and being substantially free of bromide ions and being substantially free of solid material which is not soluble in hydrochloric acid.

  18. Coiled tubing; Operations and services

    SciTech Connect (OSTI)

    Sas-Jaworsky, A. II )

    1992-03-01

    Operations involving sand or solids washing are the most common of today's coiled tubing workover services. Wellbore cleanouts require pumping fluid that will entrain solids and return them to the surface. In most cases, wash fluids and solids are captured in surface tanks of sufficient volume to allow solids to settle out. Where practical, fluids are recirculated to reduce cost. An important concern when designing sand wash programs is correct fluid system selection. Wash fluids should closely balance BHP and provide piston like displacement for solids removal. This paper is an overview of compressible and incompressible fluids commonly used for coiled tubing services.

  19. ORDER FOR SUPPLIES OR SERVICES

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2/12/2016 DE-DT0010705 16EM000994 EMCBC U.S. Department of Energy EM Consolidated Business Center 250 E. 5th Street, Suite 500 GILBERT TORRES SIGMA SCIENCE INC 500 MARQUETTE AVE. NW SUITE 1200 ALBUQUERQUE NM 87102 12. F.O.B. POINT Destination 0682/15/505460/01 ITEM NO. (a) SUPPLIES OR SERVICES (b) QUANTITY ORDERED (c) UNIT (d) UNIT PRICE (e) AMOUNT (f) QUANTITY ACCEPTED (g) X X 14 Destination Destination Cincinnati OH 45202 DE-EM0003878/ NET 30 f. SERVICE-DISABLED e. HUBZone g. WOMEN-OWNED SMALL

  20. Strategic Ground Delivery Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ground Delivery Services Strategic Ground Delivery Services Use of New Strategically Source Agreement UPS.pdf.pdf (96.79 KB) More Documents & Publications POLICY FLASH 2010-42 Use of New Strategically Sourced Blanket Purchase Agreement for Domestic Delivery Services with United Parcel Service Minutes from the Print and Mail Managers Exchange Forum Teleconferences

  1. Management of Support Services Activities

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1991-05-17

    To provide the policy, procedures, and responsibilities for the management of support services contracts with the Department of Energy (DOE). Cancels DOE O 4200.3B dated 10-3-85. Chg 1 dated 3-26-92. Canceled by DOE O 4200.3D dated 8-31-92.

  2. DOE Awards Support Service Contract

    Energy.gov [DOE]

    Cincinnati - The U.S. Department of Energy (DOE) announced an award today which was made under the National Nuclear Security Administration (NNSA)’s Technical, Engineering, and Programmatic Support Services (TEPS) Blanket Purchase Agreement (BPA) DE-NA0001224 to Link Technologies, Inc., of Germantown, MD.

  3. Warehouse and Service Building Renovations

    Energy.gov [DOE]

    Many Federal facilities include warehouses or other buildings used for storage service such as motor pools or groundskeeping, hangars, or other spaces that are frequently open to the outside and have only semi-conditioned spaces. Use of daylighting and solar ventilation preheat are prime technologies for these type of spaces, but other technologies may also warrant consideration.

  4. Ancillary Services Provided from DER

    SciTech Connect (OSTI)

    Campbell, J.B.

    2005-12-21

    Distributed energy resources (DER) are quickly making their way to industry primarily as backup generation. They are effective at starting and then producing full-load power within a few seconds. The distribution system is aging and transmission system development has not kept up with the growth in load and generation. The nation's transmission system is stressed with heavy power flows over long distances, and many areas are experiencing problems in providing the power quality needed to satisfy customers. Thus, a new market for DER is beginning to emerge. DER can alleviate the burden on the distribution system by providing ancillary services while providing a cost adjustment for the DER owner. This report describes 10 types of ancillary services that distributed generation (DG) can provide to the distribution system. Of these 10 services the feasibility, control strategy, effectiveness, and cost benefits are all analyzed as in the context of a future utility-power market. In this market, services will be provided at a local level that will benefit the customer, the distribution utility, and the transmission company.

  5. Sandia National Laboratories: Products and Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Products and Services What Does Sandia Buy? Products and Services Corporate Agreements DOE Complex Wide Agreements Doing Business with Department of Energy (DOE) and National Nuclear Security Administration (NNSA) Small Business Business Opportunities Website What Sandia Looks For In Our Suppliers Working with Sandia Products and Services Sandia works with and purchases products and services for these areas: Research and Development Products, materials, and services to support R&D:

  6. EXCEPTIONAL SERVICE IN THE NATIONAL INTEREST

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and the third turbine five diameters downwind (the turbines form a three, five-, six- diameter-length triangle). Two turbines are funded by the DOE's Office of Energy...

  7. CALIBRATION OF THE MIXING-LENGTH THEORY FOR CONVECTIVE WHITE DWARF ENVELOPES

    SciTech Connect (OSTI)

    Tremblay, P.-E.; Ludwig, H.-G.; Freytag, B.; Fontaine, G.; Brassard, P.; Steffen, M.

    2015-02-01

    A calibration of the mixing-length parameter in the local mixing-length theory (MLT) is presented for the lower part of the convection zone in pure-hydrogen-atmosphere white dwarfs. The parameterization is performed from a comparison of three-dimensional (3D) CO5BOLD simulations with a grid of one-dimensional (1D) envelopes with a varying mixing-length parameter. In many instances, the 3D simulations are restricted to the upper part of the convection zone. The hydrodynamical calculations suggest, in those cases, that the entropy of the upflows does not change significantly from the bottom of the convection zone to regions immediately below the photosphere. We rely on this asymptotic entropy value, characteristic of the deep and adiabatically stratified layers, to calibrate 1D envelopes. The calibration encompasses the convective hydrogen-line (DA) white dwarfs in the effective temperature range 6000 ≤ T {sub eff} (K) ≤15, 000 and the surface gravity range 7.0 ≤ log g ≤ 9.0. It is established that the local MLT is unable to reproduce simultaneously the thermodynamical, flux, and dynamical properties of the 3D simulations. We therefore propose three different parameterizations for these quantities. The resulting calibration can be applied to structure and envelope calculations, in particular for pulsation, chemical diffusion, and convective mixing studies. On the other hand, convection has no effect on the white dwarf cooling rates until there is a convective coupling with the degenerate core below T {sub eff} ∼ 5000 K. In this regime, the 1D structures are insensitive to the MLT parameterization and converge to the mean 3D results, hence they remain fully appropriate for age determinations.

  8. Services

    Energy.gov [DOE]

    The Environmental Management Los Alamos Field Office (EM-LA) is dedicated to the cleanup of legacy contamination of radioactive and chemical waste resulting from past practices during the Manhattan Project and Cold War era at Los Alamos National Laboratory.

  9. Services

    Energy.gov [DOE]

    The Loan Programs consist of three separate programs, Section 1703, Section 1705, and Advanced Technology Vehicles Manufacturing (ATVM).

  10. Services

    Energy.gov [DOE]

    Energy Saver provides consumers and homeowners with information on energy efficiency and renewable energy that can be used at home and while driving. In addition to our information on heating and...

  11. Services

    Energy.gov [DOE]

    The Office of Technology Transitions (OTT) conducts three key activities that are imperative to mission success– data management and analysis, evidence-based impact evaluations, and stakeholder...

  12. Radiative kaon capture on deuterium and the. Lambda. n scattering lengths

    SciTech Connect (OSTI)

    Gall, K.P.; Booth, E.C.; Fickinger, W.J.; Hasinoff, M.D.; Hessey, N.P.; Horvath, D.; Lowe, J.; McIntyre, E.K.; Measday, D.F.; Miller, J.P.; Noble, A.J.; Roberts, B.L.; Robinson, D.K.; Sakitt, M.; Salomon, M.; Whitehouse, D.A. Case Western Reserve University, Cleveland, OH University of British Columbia, Vancouver, BC University of Birmingham, Birmingham Central Research Institute for Physics of the Hungarian Academy of Sciences, Budapest, TRIUMF, Vancouver, BC Brookhaven National Laboratory, Upton, NY TRIUMF, Vancouver, BC )

    1990-08-01

    The photon spectrum from {ital K}{sup {minus}}{ital d}{r arrow}{Lambda}{ital n}{gamma} at rest has been measured for the first time. We obtained the branching ratio, in the end-point region, of (1.89{plus minus}0.12{plus minus}0.28){times}10{sup {minus}3} where the first error is statistical and the second is systematic. We have found that the shape of the photon energy spectrum is consistent with the distribution calculated by Workman and Fearing with {Lambda}{ital n} scattering lengths and effective ranges predicted by the Nijmegen group.

  13. Temperature dependence of diffusion length, lifetime and minority electron mobility in GaInP

    SciTech Connect (OSTI)

    Schultes, F. J.; Haegel, N. M.; Christian, T.; Alberi, K.; Fluegel, B.; Jones-Albertus, R.; Pickett, E.; Liu, T.; Misra, P.; Sukiasyan, A.; Yuen, H.

    2013-12-09

    The mobility of electrons in double heterostructures of p-type Ga{sub 0.50}In{sub 0.50}P has been determined by measuring minority carrier diffusion length and lifetime. The minority electron mobility increases monotonically from 300?K to 5?K, limited primarily by optical phonon and alloy scattering. Comparison to majority electron mobility over the same temperature range in comparably doped samples shows a significant reduction in ionized impurity scattering at lower temperatures, due to differences in interaction of repulsive versus attractive carriers with ionized dopant sites. These results should be useful in modeling and optimization for multi-junction solar cells and other optoelectronic devices.

  14. Three-Body Recombination into Deep Bound States in a Bose Gas with Large Scattering Length

    SciTech Connect (OSTI)

    Braaten, Eric; Hammer, H.-W.

    2001-10-15

    An effective field theory for the three-body system with large two-body scattering length a is applied to three-body recombination into deep bound states in a Bose gas. The recombination constant {alpha} is calculated to first order in the short-distance interactions that allow the recombination. For a<0 , the dimensionless combination m{alpha}/({Dirac_h}a{sup 4}) is a periodic function of ln|a| that exhibits resonances at values of a that differ by multiplicative factors of 22.7. This dramatic behavior should be observable near a Feshbach resonance when a becomes large and negative.

  15. Telomere length differences between subcutaneous and visceral adipose tissue in humans

    SciTech Connect (OSTI)

    Lakowa, Nicole; Trieu, Nhu; Flehmig, Gesine; Lohmann, Tobias; Schön, Michael R.; Dietrich, Arne; Zeplin, Philip Helge; Langer, Stefan; Stumvoll, Michael; Blüher, Matthias; Klöting, Nora

    2015-02-13

    Adipocyte hypertrophy and hyperplasia have been shown to be associated with shorter telomere length, which may reflect aging, altered cell proliferation and adipose tissue (AT) dysfunction. In individuals with obesity, differences in fat distribution and AT cellular composition may contribute to obesity related metabolic diseases. Here, we tested the hypotheses that telomere lengths (TL) are different between: (1) abdominal subcutaneous and omental fat depots, (2) superficial and deep abdominal subcutaneous AT (SAT), and (3) adipocytes and cells of the stromal vascular fraction (SVF). We further asked whether AT TL is related to age, anthropometric and metabolic traits. TL was analyzed by quantitative PCR in total human genomic DNA isolated from paired subcutaneous and visceral AT of 47 lean and 50 obese individuals. In subgroups, we analyzed TL in isolated small and large adipocytes and SVF cells. We find significantly shorter TL in subcutaneous compared to visceral AT (P < 0.001) which is consistent in men and subgroups of lean and obese, and individuals with or without type 2 diabetes (T2D). Shorter TL in SAT is entirely due to shorter TL in the SVF compared to visceral AT (P < 0.01). SAT TL is most strongly correlated with age (r = −0.205, P < 0.05) and independently of age with HbA1c (r = −0.5, P < 0.05). We found significant TL differences between superficial SAT of lean and obese as well as between individuals with our without T2D, but not between the two layers of SAT. Our data indicate that fat depot differences in TL mainly reflect shorter TL of SVF cells. In addition, we found an age and BMI-independent relationship between shorter TL and HbA1c suggesting that chronic hyperglycemia may impair the regenerative capacity of AT more strongly than obesity alone. - Highlights: • Telomere lengths (TL) differ between fat depots mainly due to different lengths in SVF. • TL is not associated with gender, BMI and T2D. • The tendency for

  16. Telomere length in children environmentally exposed to low-to-moderate levels of lead

    SciTech Connect (OSTI)

    Pawlas, Natalia; Płachetka, Anna; Kozłowska, Agnieszka; Broberg, Karin; Kasperczyk, Sławomir

    2015-09-01

    Shorter relative telomere length in peripheral blood is a risk marker for some types of cancers and cardiovascular diseases. Several environmental hazards appear to shorten telomeres, and this shortening may predispose individuals to disease. The aim of the present cross-sectional study was to assess the effect of environmental exposure to lead on relative telomere length (rTL) in children. A cohort of 99 8-year-old children was enrolled from 2007–2010. Blood lead concentrations (B-Pb) were measured by graphite furnace atomic absorption spectrometry, and blood rTL was measured by quantitative PCR. The geometric mean of B-Pb was 3.28 μg/dl (range: 0.90–14.2), and the geometric mean of rTL was 1.08 (range: 0.49–2.09). B-Pb was significantly inversely associated with rTL in the children (r{sub S} = − 0.25, p = 0.013; in further analyses both log-transformed-univariate regression analysis β = − 0.13, p = 0.026, and R{sup 2}adj 4%; and β = − 0.12, p = 0.056 when adjusting for mothers' smoking during pregnancy, Apgar score, mother's and father's ages at delivery, sex and mother's education, R{sup 2}adj 12%, p = 0.011). The effect of lead remained significant in children without prenatal tobacco exposure (N = 87, r{sub S} = − 0.24, p = 0.024; in further analyses, β = − 0.13, p = 0.029, and R{sup 2}adj 4%). rTL was not affected by sex, the concentrations of other elements in the blood (i.e., cadmium and selenium concentrations), or oxidative injury parameters (total antioxidant status, 8-hydroxydeoxyguanosine and thiobarbituric acid-reactive substances). Lead exposure in childhood appears to be associated with shorter telomeres, which might contribute to diseases, such as cardiovascular disease. The inverse association between blood lead level and the telomeres in children emphasizes the importance of further reducing lead levels in the environment. - Highlights: • This cross-sectional study analyzes the association between environmental lead exposure

  17. Natural uranium/conversion services/enrichment services

    SciTech Connect (OSTI)

    1993-12-31

    This article is the 1993 uranium market summary. During this reporting period, there were 50 deals in the concentrates market, 26 deals in the UF6 market, and 14 deals for enrichment services. In the concentrates market, the restricted value closed $0.15 higher at $9.85, and the unrestricted value closed down $0.65 at $7.00. In the UF6 market, restricted prices fluctuated and closed higher at $31.00, and unrestricted prices closed at their initial value of $24.75. The restricted transaction value closed at $10.25 and the unrestricted value closed at $7.15. In the enrichment services market, the restricted value moved steadily higher to close at $84.00 per SWU, and the unrestricted value closed at its initial value of $68.00 per SWU.

  18. Geothermal XML Product Data Services Manual | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    Geothermal XML Product Data Services Manual Available Downloads: PDF icon GeothermalXMLDataServicesManual0

  19. IMPACTS OF REFRIGERANTLINE LENGTH ON SYSTEM EFFICIENCY IN RESIDENTIAL HEATING AND COOLING SYSTEMS USING REFRIGERANT DISTRIBUTION.

    SciTech Connect (OSTI)

    ANDREWS, J.W.

    2001-04-01

    The effects on system efficiency of excess refrigerant line length are calculated for an idealized residential heating and cooling system. By excess line length is meant refrigerant tubing in excess of the 25 R provided for in standard equipment efficiency test methods. The purpose of the calculation is to provide input for a proposed method for evaluating refrigerant distribution system efficiency. A refrigerant distribution system uses refrigerant (instead of ducts or pipes) to carry heat and/or cooling effect from the equipment to the spaces in the building in which it is used. Such systems would include so-called mini-splits as well as more conventional split systems that for one reason or another have the indoor and outdoor coils separated by more than 25 ft. This report performs first-order calculations of the effects on system efficiency, in both the heating and cooling modes, of pressure drops within the refrigerant lines and of heat transfer between the refrigerant lines and the space surrounding them.

  20. Measurement of laminar burning speeds and Markstein lengths using a novel methodology

    SciTech Connect (OSTI)

    Tahtouh, Toni; Halter, Fabien; Mounaim-Rousselle, Christine [Institut PRISME, Universite d'Orleans, 8 rue Leonard de Vinci-45072, Orleans Cedex 2 (France)

    2009-09-15

    Three different methodologies used for the extraction of laminar information are compared and discussed. Starting from an asymptotic analysis assuming a linear relation between the propagation speed and the stretch acting on the flame front, temporal radius evolutions of spherically expanding laminar flames are postprocessed to obtain laminar burning velocities and Markstein lengths. The first methodology fits the temporal radius evolution with a polynomial function, while the new methodology proposed uses the exact solution of the linear relation linking the flame speed and the stretch as a fit. The last methodology consists in an analytical resolution of the problem. To test the different methodologies, experiments were carried out in a stainless steel combustion chamber with methane/air mixtures at atmospheric pressure and ambient temperature. The equivalence ratio was varied from 0.55 to 1.3. The classical shadowgraph technique was used to detect the reaction zone. The new methodology has proven to be the most robust and provides the most accurate results, while the polynomial methodology induces some errors due to the differentiation process. As original radii are used in the analytical methodology, it is more affected by the experimental radius determination. Finally, laminar burning velocity and Markstein length values determined with the new methodology are compared with results reported in the literature. (author)

  1. Structural stability of transparent conducting films assembled from length purified single-wall carbon nanotubes

    SciTech Connect (OSTI)

    J. M. Harris; G. R. S. Iyer; D. O. Simien; J. A. Fagan; J. Y. Huh; J. Y. Chung; S. D. Hudson; J. Obrzut; J. F. Douglas; C. M. Stafford; E. K. Hobbie

    2011-01-01

    Single-wall carbon nanotube (SWCNT) films show significant promise for transparent electronics applications that demand mechanical flexibility, but durability remains an outstanding issue. In this work, thin membranes of length purified single-wall carbon nanotubes (SWCNTs) are uniaxially and isotropically compressed by depositing them on prestrained polymer substrates. Upon release of the strain, the topography, microstructure, and conductivity of the films are characterized using a combination of optical/fluorescence microscopy, light scattering, force microscopy, electron microscopy, and impedance spectroscopy. Above a critical surface mass density, films assembled from nanotubes of well-defined length exhibit a strongly nonlinear mechanical response. The measured strain dependence reveals a dramatic softening that occurs through an alignment of the SWCNTs normal to the direction of prestrain, which at small strains is also apparent as an anisotropic increase in sheet resistance along the same direction. At higher strains, the membrane conductivities increase due to a compression-induced restoration of conductive pathways. Our measurements reveal the fundamental mode of elasto-plastic deformation in these films and suggest how it might be suppressed.

  2. Critical length for upheaval buckling of straight pipelines buried in ice rich soils

    SciTech Connect (OSTI)

    Quimby, T.B.

    1996-12-01

    Upheaval buckling, a phenomena receiving attention in offshore pipelines, has also been found to be a problem for onshore arctic pipelines buried in ice rich soils. While anticipated in overbend situations, it is also being found in pipelines designed to be straight. Understanding the mechanics and parameters affecting this behavior are essential to properly designing a buried arctic pipeline. This paper introduces the parameters that have led to upheaval buckling in at least one pipeline and describes the operation of a program that computes the critical buckling loads at various pipe lengths for the inception of upheaval buckling in a buried pipeline. The method uses finite elements to solve the eigenvalue problem for the axial stability of a column with flexible lateral restraints. This program can be used to predict critical lengths for straight pipelines that lose some or all of the lateral restraint of soil through erosion or thermal degradation. The results are used to make decisions concerning backfill and restrain design. The effects of soils stiffness are considered. Additional research needs are also discussed.

  3. Method and apparatus for determining minority carrier diffusion length in semiconductors

    DOE Patents [OSTI]

    Moore, Arnold R.

    1984-01-01

    Method and apparatus are provided for determining the diffusion length of minority carriers in semiconductor material, particularly amorphous silicon which has a significantly small minority carrier diffusion length using the constant magnitude surface-photovoltage (SPV) method. Steady or modulated illumination at several wavelengths provides the light excitation on the surface of the material to generate the SPV. A manually controlled or automatic servo system maintains a constant predetermined value of the SPV for each wavelength. A drop of a transparent electrolyte solution containing redox couples (preferably quinhydrone) having an oxidation-reduction potential (E) in the order of +0.6 to -1.65 volts couples the SPV to a measurement system. The drop of redox couple solution functions to create a liquid Schottky barrier at the surface of the material. Illumination light is passed through a transparent rod supported over the surface and through the drop of transparent electrolyte. The drop is held in the gap between the rod and the surface. Steady red light is also used as an optical bias to reduce deleterious space-charge effects that occur in amorphous silicon.

  4. Method and apparatus for determining minority carrier diffusion length in semiconductors

    DOE Patents [OSTI]

    Moore, Arnold R.

    1984-02-21

    Method and apparatus are provided for determining the diffusion length of minority carriers in semiconductor material, particularly amorphous silicon, which has a significantly small minority carrier diffusion length using the constant magnitude surface-photovoltage (SPV) method. Steady or modulated illumination at several wavelengths provides the light excitation on the surface of the material to generate the SPV. A manually controlled or automatic servo system maintains a constant predetermined value of the SPV for each wavelength. A probe electrode immersed in an electrolyte solution containing redox couples (preferably quinhydrone) having an oxidation-reduction potential (E) in the order of +0.6 to -1.65 volts couples the SPV to a measurement system. The redox couple solution functions to create a liquid Schottky barrier at the surface of the material. The Schottky barrier is contacted by merely placing the probe in the solution. The redox solution is placed over and in contact with the material to be tested and light is passed through the solution to generate the SPV. To compensate for colored redox solutions a portion of the redox solution not over the material is also illuminated for determining the color compensated light intensity. Steady red light is also used as an optical bias to reduce deleterious space-charge effects that occur in amorphous silicon.

  5. Effects of nutrient recycling and food-chain length on resilience

    SciTech Connect (OSTI)

    DeAngelis, D.L.; Bartell, S.M. ); Brenkert, A.L. )

    1989-11-01

    The attempt to explain the observed structure of ecological food webs has been one of the recent key issues of theoretical ecology. Unquestionably, many factors are involved in determining food-web structure. The dissipation of available energy from one trophic level to the next has been emphasized by Yodzis as the major factor limiting the length of food chains. However, Pimm and Lawton and Pimm have argued that a decrease in relative stability with increasing food-chain length may also be a factor. By relative stability (more commonly, resilience), we mean the rate at which a stable ecological system returns to a steady state following a perturbation. Resilience can be defined more precisely as the inverse of the return time T{sub R}, the time it takes a systems to return a specified fraction of the way toward a steady state following a perturbation. Besides its possible significance to food-web structure, ecosystem resilience is a factor of practical importance, since it is a measure of the rate at which the ecosystem can recover from disturbances. Our purpose is to investigate resilience in food-chain and food-web models as nutrient input and the trophic structure are varied and to offer explanations of the observed model behaviors. In this paper we present the basic results by first using a simple abstract food-chain model at steady state and then showing that these results hold for a more complex food-web simulation model without a constant steady state solution.

  6. Scattering lengths and medium and high energy {pi}{pi} scattering

    SciTech Connect (OSTI)

    Ananthanarayan, B.; Buettiker, P.

    1996-11-01

    Crucial tests of chiral perturbation theory and determinations of chiral coupling constants rely on fine details of dispersion relation analysis of {pi}{pi} scattering data. Whereas a recent Roy equation analysis of low energy {ital S} and {ital P} waves with {ital a}{sup 0}{sub 0} in the range predicted by standard one-loop chiral perturbation theory, yielded sharp determinations of certain {ital S}- and {ital P}-wave threshold parameters only, we now extend the discussion to medium and high energy. This is shown to contribute to the {ital D}-wave scattering lengths {ital a}{sup 0}{sub 2} and {ital a}{sup 2}{sub 2} significantly, roughly 10{percent} and 30{percent} of their central experimental values, remaining consistent with chiral predictions. Results of our Roy equation fits to the {ital F}-wave scattering length {ital a}{sup 1}{sub 3}, a quantity for which two-loop chiral perturbation theory holds important predictions, are presented. {copyright} {ital 1996 The American Physical Society.}

  7. PREDICTION OF CHARACTERISTIC LENGTH AND FRACTURE TOUGHNESS IN DUCTILE-BRITTLE TRANSITION

    SciTech Connect (OSTI)

    Lam, P

    2008-04-15

    Finite element method was used to analyze the three-point bend experimental data of A533B-1 pressure vessel steel obtained by Sherry, Lidbury, and Beardsmore [1] from -160 to -45 C within the ductile-brittle transition regime. As many researchers have shown, the failure stress ({sigma}{sub f}) of the material could be approximated as a constant. The characteristic length, or the critical distance (r{sub c}) from the crack tip, at which {sigma}{sub f} is reached, is shown to be temperature dependent based on the crack tip stress field calculated by the finite element method. With the J-A{sub 2} two-parameter constraint theory in fracture mechanics, the fracture toughness (J{sub C} or K{sub JC}) can be expressed as a function of the constraint level (A{sub 2}) and the critical distance r{sub c}. This relationship is used to predict the fracture toughness of A533B-1 in the ductile-brittle transition regime with a constant {sigma}{sub f} and a set of temperature-dependent r{sub c}. It can be shown that the prediction agrees well with the test data for wide range of constraint levels from shallow cracks (a/W= 0.075) to deep cracks (a/W= 0.5), where a is the crack length and W is the specimen width.

  8. Strain rate, temperature and representative length scale influence on plasticity and yield stress in copper

    SciTech Connect (OSTI)

    Dupont, Virginie; Germann, Timothy C

    2011-01-18

    Shock compression of materials constitutes a complex process involving high strain rates, elevated temperatures and compression of the lattice. Materials properties are greatly affected by temperature, the representative length scale and the strain rate of the deformation. Experimentally, it is difficult to study the dynamic microscopic mechanisms that affect materials properties following high intensity shock loading, but they can be investigated using molecular dynamics (MD) simulations. Moreover, MD allows a better control over some parameters. We are using MD simulations to study the effect of the strain rate, representative length scale and temperature on the properties of metals during compression. A half-million-atom Cu sample is subjected to strain rates ranging from 10{sup 7} s{sup -1} to 10{sup 12} s{sup -1} at different temperatures ranging from 50K to 1500K. Single crystals as well as polycrystals are investigated. Plasticity mechanisms as well as the evolution of the micro- and macro-yield stress are observed. Our results show that the yield stress increases with increasing strain rate and decreasing temperature. We also show that the strain rate at which the transition between constant and increasing yield stress as a function of the temperature occurs increases with increasing temperature. Calculations at different grain sizes will give an insight into the grain size effect on the plasticity mechanisms and the yield stress.

  9. Utilities combat theft of service

    SciTech Connect (OSTI)

    Lady, P.

    1983-01-01

    Today theft of service has become a serious problem for the gas utilities (one utility estimated it to be 10% of its net profit) and many companies have established special departments or units to deal with it. Major factors contributing to gas theft are (1) the price escalation after the 1973-74 oil embargo, (2) high unemployment, (3) poor economic conditions, (4) a general decline in respect for utilities and the law, (5) minimal risk to offenders (customers feel that nothing will happen to them if they get caught), (6) relatively low skill required to illegally restore utility service, and (7) the attitude of getting something for nothing. Some preventive methods now being recommended include the following: (1) the use of computers to scan consumption patterns, (2) unannounced meter readings, and (3) tips from hotline tape recordings and from meter readers, departments, and neighboring utilities.

  10. Performance-Based Services Acquisition

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7.601 August 2016 ______________________________________________________________________________ 1 Performance-Based Services Acquisition [Reference: Public Law 106-398, § 821, FAR 37.6] 1.0 Summary of Latest Changes This update: (1) changes the chapter number from 37.2 to 37.601 to coincide with the FAR, (2) updates references, and (3) includes administrative changes. 2.0 Discussion This chapter supplements other more primary acquisition regulations and policies contained in the references

  11. Residential Conservation Service: a retrospective

    SciTech Connect (OSTI)

    Praul, C.G.; Gunther, A.; Maier, G.

    1981-08-01

    A background of the Residential Conservation Service (RCS) program is presented and outstanding program design issues which include effectiveness, audit effectiveness, equity concerns, anticompetitive and antitrust considerations, and general concerns in state plan development are discussed. The purpose of the review is to provide background information to legislators and other decision makers who, though not immediately involved in program administration, will be evaluating the mandate and implementation progress over the next year. (MCW)

  12. ORISE: Radiological program assessment services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Radiological program assessment services Minimizing the risk of human exposure to hazardous levels of radioactive materials requires designing a comprehensive safety program that ensures appropriate measures are taken to protect workers and the public. As a U.S. Department of Energy (DOE) institute, the Oak Ridge Institute for Science and Education (ORISE) understands the importance of having an effective safety program in place to assure stakeholders and regulators that your radiological

  13. DOE Data ID Service - Digital object identifiers for DOE scientific...

    Office of Scientific and Technical Information (OSTI)

    DOE Data ID Service DataCite | Contact DOE Data ID Service DOE Data ID Service DOE Data ID Service The DOE Office of Scientific and Technical Information (OSTI) offers a service ...

  14. Effect of the anatomical site on telomere length and pref-1 gene expression in bovine adipose tissues

    SciTech Connect (OSTI)

    Yamada, Tomoya Higuchi, Mikito; Nakanishi, Naoto

    2015-08-07

    Adipose tissue growth is associated with preadipocyte proliferation and differentiation. Telomere length is a biological marker for cell proliferation. Preadipocyte factor-1 (pref-1) is specifically expressed in preadipocytes and acts as a molecular gatekeeper of adipogenesis. In the present study, we investigated the fat depot-specific differences in telomere length and pref-1 gene expression in various anatomical sites (subcutaneous, intramuscular and visceral) of fattening Wagyu cattle. Visceral adipose tissue expressed higher pref-1 mRNA than did subcutaneous and intramuscular adipose tissues. The telomere length in visceral adipose tissue tended to be longer than that of subcutaneous and intramuscular adipose tissues. The telomere length of adipose tissue was not associated with adipocyte size from three anatomical sites. No significant correlation was found between the pref-1 mRNA level and the subcutaneous adipocyte size. In contrast, the pref-1 mRNA level was negatively correlated with the intramuscular and visceral adipocyte size. These results suggest that anatomical sites of adipose tissue affect the telomere length and expression pattern of the pref-1 gene in a fat depot-specific manner. - Highlights: • Visceral adipose tissue express higher pref-1 mRNA than other anatomical sites. • Telomere length in visceral adipose tissue is longer than other anatomical sites. • Telomere length of adipose tissue is not associated with adipocyte size. • Pref-1 mRNA is negatively correlated with intramuscular and visceral adipocyte size.

  15. Variability of interconnected wind plants: correlation length and its dependence on variability time scale

    SciTech Connect (OSTI)

    St. Martin, Clara M.; Lundquist, Julie K.; Handschy, Mark A.

    2015-04-02

    The variability in wind-generated electricity complicates the integration of this electricity into the electrical grid. This challenge steepens as the percentage of renewably-generated electricity on the grid grows, but variability can be reduced by exploiting geographic diversity: correlations between wind farms decrease as the separation between wind farms increases. However, how far is far enough to reduce variability? Grid management requires balancing production on various timescales, and so consideration of correlations reflective of those timescales can guide the appropriate spatial scales of geographic diversity grid integration. To answer 'how far is far enough,' we investigate the universal behavior of geographic diversity by exploring wind-speed correlations using three extensive datasets spanning continents, durations and time resolution. First, one year of five-minute wind power generation data from 29 wind farms span 1270 km across Southeastern Australia (Australian Energy Market Operator). Second, 45 years of hourly 10 m wind-speeds from 117 stations span 5000 km across Canada (National Climate Data Archive of Environment Canada). Finally, four years of five-minute wind-speeds from 14 meteorological towers span 350 km of the Northwestern US (Bonneville Power Administration). After removing diurnal cycles and seasonal trends from all datasets, we investigate dependence of correlation length on time scale by digitally high-pass filtering the data on 0.25–2000 h timescales and calculating correlations between sites for each high-pass filter cut-off. Correlations fall to zero with increasing station separation distance, but the characteristic correlation length varies with the high-pass filter applied: the higher the cut-off frequency, the smaller the station separation required to achieve de-correlation. Remarkable similarities between these three datasets reveal behavior that, if universal, could be particularly useful for grid management. For high

  16. Electrical and mechanical design criteria for EHV and UHV: overhead...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Report Number(s): DOERA2133-01 DOE Contract Number: AC01-77ET29236 Resource Type: Technical Report Research Org: Main (Charles T.), Inc., Boston, MA (USA) Country of Publication: ...

  17. Fault isolation through no-overhead link level CRC

    DOE Patents [OSTI]

    Chen, Dong; Coteus, Paul W.; Gara, Alan G.

    2007-04-24

    A fault isolation technique for checking the accuracy of data packets transmitted between nodes of a parallel processor. An independent crc is kept of all data sent from one processor to another, and received from one processor to another. At the end of each checkpoint, the crcs are compared. If they do not match, there was an error. The crcs may be cleared and restarted at each checkpoint. In the preferred embodiment, the basic functionality is to calculate a CRC of all packet data that has been successfully transmitted across a given link. This CRC is done on both ends of the link, thereby allowing an independent check on all data believed to have been correctly transmitted. Preferably, all links have this CRC coverage, and the CRC used in this link level check is different from that used in the packet transfer protocol. This independent check, if successfully passed, virtually eliminates the possibility that any data errors were missed during the previous transfer period.

  18. DOE-HDBK-1141-2001; Radiological Assessor Training, Overheads

    Energy Savers

    Uses for Accelerators * Basic research * Production of radioisotopes * Generation of bremsstrahlung for radiography * Induction of fusion * Pumping for lasers * Detoxification of ...

  19. Evaluation of Instrumentation and Dynamic Thermal Ratings for Overhead Lines

    SciTech Connect (OSTI)

    Phillips, A.

    2013-01-31

    In 2010, a project was initiated through a partnership between the Department of Energy (DOE) and the New York Power Authority (NYPA) to evaluate EPRI's rating technology and instrumentation that can be used to monitor the thermal states of transmission lines and provide the required real-time data for real-time rating calculations. The project included the installation and maintenance of various instruments at three 230 kV line sites in northern New York. The instruments were monitored, and data collection and rating calculations were performed for about a three year period.

  20. Two linear time, low overhead algorithms for graph layout

    Energy Science and Technology Software Center (OSTI)

    2008-01-10

    The software comprises two algorithms designed to perform a 2D layout of a graph structure in time linear with respect to the vertices and edges in the graph, whereas most other layout algorithms have a running time that is quadratic with respect to the number of vertices or greater. Although these layout algorithms run in a fraction of the time as their competitors, they provide competitive results when applied to most real-world graphs. These algorithmsmore » also have a low constant running time and small memory footprint, making them useful for small to large graphs.« less

  1. PNC Financial Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Jump to: navigation, search Name: PNC Financial Services Place: Pittsburgh, PA Zip: 15222 Website: www.pnc.com Coordinates: 40.4423162, -80.005979 Show Map Loading...

  2. Excepted Service EJ and EK Desk Reference

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Excepted Service EJ and EK Desk Reference is designed to provide the framework, in conjunction, with the DOE O 329.1 (Excepted Service Authorities for EJ and EK Pay Plans). Specifically, the...

  3. Utility Energy Services Contracts: Enabling Documents

    SciTech Connect (OSTI)

    2009-05-01

    Utility Energy Services Contracts: Enabling Documents provides materials that clarify the authority for Federal agencies to enter into utility energy services contracts (UESCs), as well as sample documents and resources to ease utility partnership contracting.

  4. Ocala Utility Services- Energy Efficiency Rebate Program

    Energy.gov [DOE]

    Ocala Utility Services Electric and Telecommunications is a community owned utility that serves around 50,000 customers in Ocala and Marion County area. Ocala Utility Services offers rebates on A/C...

  5. web services | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    web services Home Rmckeel's picture Submitted by Rmckeel(297) Contributor 29 June, 2012 - 09:30 OpenEI API listing developer web services We had an internal OpenEI strategy...

  6. Elink - About OSTI's Data ID Service

    Office of Scientific and Technical Information (OSTI)

    To learn more about the DOE Data ID Service, go to the OSTI home page, select "Science Search Tools" from the menu bar, then click on "Data Services." Follow the links to ...

  7. Maine Public Service Co | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Maine Public Service Co Jump to: navigation, search Name: Maine Public Service Co Place: Maine Phone Number: 207-973-2000 Website: www.emeramaine.com Twitter: @emerame Facebook:...

  8. DOE Research and Development Accomplishments XML Service

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    XML Service This XML service is a mechanism for searching the DOE R&D Accomplishments Database, full-text documents, and Web pages, either through a query string in a browser or ...

  9. Beam splitter and method for generating equal optical path length beams

    DOE Patents [OSTI]

    Qian, Shinan; Takacs, Peter

    2003-08-26

    The present invention is a beam splitter for splitting an incident beam into first and second beams so that the first and second beams have a fixed separation and are parallel upon exiting. The beam splitter includes a first prism, a second prism, and a film located between the prisms. The first prism is defined by a first thickness and a first perimeter which has a first major base. The second prism is defined by a second thickness and a second perimeter which has a second major base. The film is located between the first major base and the second major base for splitting the incident beam into the first and second beams. The first and second perimeters are right angle trapezoidal shaped. The beam splitter is configured for generating equal optical path length beams.

  10. A fast coherent synchrotron radiation monitor for the bunch length of the short CEBAF bunches

    SciTech Connect (OSTI)

    Wang, D.X.; Krafft, G.A.; Price, E.; Wood, P.; Porterfield, D.; Crowe, T.

    1996-04-01

    A novel bunch length monitor for short (down to subpicosecond) electron bunches has been developed in a collaboration between CEBAF and the University of Virginia (UVA), using coherent synchrotron radiation (CSR) detection techniques. The monitor employs a state of the art {open_quote}{open_quote}narrowband{close_quote}{close_quote} GaAs Schottky whisker diode developed by the UVA group, and has the following features: it is non-invasive, compact, and low cost, it has fast rise time, low noise, high sensitivity, and it operates at room temperature. In this paper, the design parameters and performance of the monitor and selected measurement results will be presented. {copyright} {ital 1996 American Institute of Physics.}

  11. Low density gas and foam targets for ICF long scale length plasma experiments: Fabrication & characterization

    SciTech Connect (OSTI)

    Gobby, P.L.; Mitchell, M.A.; Eliott, N.E.; Salazar, M.A.; Fermandez, J.C.; Hsing, W.W.; Moore, J.E.; Gomez, V.M.

    1994-10-01

    Recent ICF experiments performed by the laser-matter interaction group at Los Alamos using the Nova laser to investigate long scale length plasmas required two types of special targets: gas-filled hohlraums and free-standing low density foams, both with densities in the range of 3-5 mg/cc. The mass in each case was provided by hydrogen and carbon - in the form of polymethylpentyene for the foam case and 2.2-dimethylpropane (i.e., neopentane, C{sub 5}H{sub 12}) at 1 atmosphere for the gas case. Dopants of Cl, Ti, Cr and Mn were added to the foams, while Ti and Cr coated carbon fibers were added to the hohlraums - both for isoelectronic x-ray spectroscopic temperature measurements.

  12. Intellectual Property (IP) Service Providers for Acquisition...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Intellectual Property Provides ACQ and Assistance More Documents & Publications Intellectual Property (IP) Service Providers for Acquisition and Assistance Transactions Microsoft ...

  13. Intellectual Property (IP) Service Providers for Acquisition...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOEIPCounselforDOELaboratories 2015 More Documents & Publications Intellectual Property (IP) Service Providers for Acquisition and Assistance Transactions ...

  14. Environmental Program Services Contract | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Environmental Program Services Contract Environmental Program Services Contract Welcome to the Department of Energy (DOE), National Nuclear Security Administration (NNSA) webpage for the Nevada Field Office (NFO) Environmental Program Services acquisition competition. The purpose for this Contract is to provide environmental characterization and remediation services at corrective action units at the Nevada National Security Site and parts of the Nevada Test and

  15. ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 4: INFORMATIONAL SERVICES RECORDS ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS This schedule covers certain records pertaining to informational services performed by the Department in their day-to-day affairs and in their relations with the public, including records created in administering Freedom of Information Act (FOIA) and Privacy Act ) programs. ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS (57.91 KB) More Documents &

  16. FY 2013 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3 Service Contract Inventory Analysis Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2014 FY 2013 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Scope 2 Section 2: Methodology 4 Section 3: Findings 6 Section 4: Actions Taken or Planned 7 FY 2013 Service Contract Inventory Analysis Department of Energy 2 Section 1: Scope Service Contract Inventories Section 743 of Division C of the FY 2010

  17. DOE Qualified List of Energy Service Companies

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document contains the latest list of U.S. Department of Energy (DOE) qualified energy service companies (ESCOs).

  18. ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 4: INFORMATIONAL SERVICES RECORDS ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS This schedule covers certain records pertaining to informational services performed by the Department in their day-to-day affairs and in their relations with the public, including records created in administering Freedom of Information Act (FOIA) and Privacy Act ) programs ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS (34.81 KB) More Documents &

  19. Competing Federal Utility Energy Service Contracts

    Energy.gov [DOE]

    Opening utility energy service contracts to competing franchised utility companies ensures federal agencies get the best value for their projects.

  20. Sandia National Laboratories: Products and Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Gages, Fixtures, Molds Power Sources & Batteries Manufacturing, Shop Overflow through the Manufacturing Processes & Services Department Energy, Security & International Procurement...

  1. NNSA Service Center Chart | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    NNSA Service Center Chart NNSA Service Center Chart Office of Chief Counsel at the NNSA Service Center in Albuquerque, NM NNSA Service Center Chart (504.86 KB) More Documents & Publications Technical Qualification Program Accreditation Schedule EIS-0466: Notice of Intent to Prepare an Environmental Impact Statement Federal Register Notice: National Nuclear Security Administration Site-Wide Environmental Impact Statement for Sandia National Laboratories, New Mexico (S

  2. Property:ServiceTerritory | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    +, West Virginia +, Tennessee + Arizona Corporation Commission + Arizona + Arizona Public Service Co + Arizona + Arkansas River Power Authority + Colorado + Arkansas Valley...

  3. Cryogenic Technical Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Technical Services Inc Place: Longmont, Colorado Zip: 805016036 Sector: Hydro, Hydrogen Product: Focused on cryogenic storage capability including hydrogen. Coordinates:...

  4. Models for mean bonding length, melting point and lattice thermal expansion of nanoparticle materials

    SciTech Connect (OSTI)

    Omar, M.S.

    2012-11-15

    Graphical abstract: Three models are derived to explain the nanoparticles size dependence of mean bonding length, melting temperature and lattice thermal expansion applied on Sn, Si and Au. The following figures are shown as an example for Sn nanoparticles indicates hilly applicable models for nanoparticles radius larger than 3 nm. Highlights: ► A model for a size dependent mean bonding length is derived. ► The size dependent melting point of nanoparticles is modified. ► The bulk model for lattice thermal expansion is successfully used on nanoparticles. -- Abstract: A model, based on the ratio number of surface atoms to that of its internal, is derived to calculate the size dependence of lattice volume of nanoscaled materials. The model is applied to Si, Sn and Au nanoparticles. For Si, that the lattice volume is increases from 20 Å{sup 3} for bulk to 57 Å{sup 3} for a 2 nm size nanocrystals. A model, for calculating melting point of nanoscaled materials, is modified by considering the effect of lattice volume. A good approach of calculating size-dependent melting point begins from the bulk state down to about 2 nm diameter nanoparticle. Both values of lattice volume and melting point obtained for nanosized materials are used to calculate lattice thermal expansion by using a formula applicable for tetrahedral semiconductors. Results for Si, change from 3.7 × 10{sup −6} K{sup −1} for a bulk crystal down to a minimum value of 0.1 × 10{sup −6} K{sup −1} for a 6 nm diameter nanoparticle.

  5. Technical Services | Y-12 National Security Complex

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Technical Services Technical Services Technical services spans Y-12 disciplines that support manufacturing at Y-12. Information Systems (National Security Systems Development) Provide solutions for information security, including the protection of national security, proprietary and any other class of highly sensitive information. Develop highly integrated, enterprise level software applications for use within the federal space and adaptable to commercial application. Leverage the transformative

  6. Product and Service Directory 2004 Issue

    SciTech Connect (OSTI)

    Agnihotri, N.K.

    2003-12-01

    This annual November-December issue of the Nuclear Plant Journal serves as directory of information resources on products and services related to the nuclear power industry. The directory consists of over 3,000 products and services submitted by over 300 suppliers worldwide during October and November 2003. The issue is divided into 4 main areas: Products and Services, Corporate Capabilities, and Suppliers.

  7. Environmental Program Services Contract | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Management Environmental Program Services Contract Environmental Program Services Contract Learn More Environmental Program Services Contract Related Topics apm contracting contracts Related News NNSA Office of Acquisition Management improves customer satisfaction NNSA Statement Regarding Nevada National Security Site Management & Operating Contract NNSA Awards Nevada National Security Site Management & Operating Contract to NVS3T Los Alamos National

  8. Michael Stewart! NERSC User Services

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Stewart! NERSC User Services Compilers on NERSC Systems --- 1 --- September 10, 2013 Compilers on NERSC Systems Crays ( Hopper a nd E dison) PrgEnv m odules p rovide l inks t o M PI a nd m ath l ibrary l ibraries a nd includes. Invoke c ompilers w ith w rapper c ommands a nd t he l oaded PrgEnv m odule will i nvoke t he p roper c ompiler: ?n ( Fortran), c c ( C c ompiler), a nd C C ( C+ +). Available c ompiler m odules: pgi ( only o n H opper), i ntel, c ray, a nd g nu (gcc). Default PrgEnv m

  9. Demand Response for Ancillary Services

    Energy.gov [DOE]

    Methodologies used to study grid integration of variable generation can be adapted to the study of demand response. In the present work, we describe and implement a methodology to construct detailed temporal and spatial representations of demand response resources and to incorporate those resources into power system models. In addition, the paper outlines ways to evaluate barriers to implementation. We demonstrate how the combination of these three analyses can be used to assess economic value of the realizable potential of demand response for ancillary services.

  10. IAEA reorganizes nuclear information services

    SciTech Connect (OSTI)

    Levine, E.

    2012-08-15

    As part of an overall restructuring of the International Atomic Energy Agency's Department of Nuclear Energy, the agency has established the Nuclear Information Section (NIS). The restructuring, recently announced by IAEA Director General Yukiya Amano, also includes the creation of a separate Nuclear Knowledge Management (NKM) Section, as demand for assistance in this area is growing among member countries. According to the NIS Web site, 'This restructuring and the creation of the NIS provides an opportunity for further enhancing existing information products and services and introducing new ones-all with an eye towards advancing higher organizational efficiency and effectiveness.'

  11. Role of the laser pulse-length in producing high-quality electron beams in a homogenous plasma

    SciTech Connect (OSTI)

    Upadhyay, Ajay K.; Arun Samant, Sushil; Krishnagopal, Srinivas

    2012-07-15

    In laser wakefield acceleration, the pulse-length of the laser is an important parameter that affects the laser evolution and electron beam injection and acceleration in the bubble regime. Here, we use three-dimensional simulations to find, for a given plasma density, the optimal pulse-length that gives the best quality electron beam. For three different pulse lengths, we study the evolution dynamics of the laser spot-size and quality of the injected electron beam. We find that a pulse-length that is less than the theoretical optimum, {tau}{sub L} = {lambda}{sub p}/{radical}2{pi}c, derived from linear theory, gives the best beam quality. Conversely, our simulations suggest that for a given laser system, with a fixed pulse-length, there is an optimal value of the plasma density that will give the best quality accelerated beams in experiments. For an rms pulse-length of 10 fs (around 24 fs FWHM), this corresponds to a plasma density of around 3.4 Multiplication-Sign 10{sup 18}/cm{sup 3}. For these parameters, we obtain, in a homogenous plasma and with a single laser, an electron beam with an energy of around 700 MeV, an energy-spread less than 2%, and rms normalized emittance of a few {pi} mm-mrad.

  12. EA-257-C Emera Energy Services Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7-C Emera Energy Services Inc EA-257-C Emera Energy Services Inc Order authorizing Emera Energy Services Inc to export electric energy to Canada. EA-257-C Emera Energy Services Inc (373.79 KB) More Documents & Publications EA-257-D Emera Energy Services, Inc. EA-257 Emera Energy Services Inc EA-257-A Emera Energy Services

  13. Products and Services Purchased | Y-12 National Security Complex

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Products and Services ... Products and Services Purchased The following products and services are regularly purchased by Y-12: Computer hardware, software and supplies Electrical and electronic instruments and systems Mechanical equipment and supplies Laboratory, safety and operating products Environmental and waste management services Professional and administrative services Engineering support services Research & development Information technology Construction materials and services

  14. Worldwide oilfield service, supply and manufacturers directory

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Three valuable sections of the Worldwide Oilfield Service, Supply and Manufacturers Diretory give SUPPLY COMPANIES - all companies engaged in wholesale and/or retail sale of products used in all phases of the petroleum industry; SERVICE COMPANIES - included in this section are all companies providing services to any phase of the oil industry such as companies that prepare drilling sites, catering services, equipment haulers, tool rental, mud services, etc.; MANUFACTURING COMPANIES - all companies engaged in the engineering, design and construction of equipment used in the oil industry. Items manufactured might be drilling rigs, pumps, valves, etc.

  15. Organizing electronic services into security taxonomies - revised

    SciTech Connect (OSTI)

    Smith, S.W.; Pedersen, P.S.

    1997-01-01

    With increasing numbers of commercial and government services being considered for electronic delivery, effective vulnerability analysis will become increasingly critical, Organizing sets of proposed electronic services into security taxonomies will be a key part of this work. However, brute force enumeration of services and risks is inefficient, and ad hoc methods require re-invention with each new set of services. Furthermore, both such approaches fail to communicate effectively the tradeoffs between vulnerabilities and features in a set of electronic services, and fail to scale to large sets of service. From our experience advising players considering electronic delivery, we have developed a general, systematic, and scalable methodology that addresses these concerns. In this paper, we present this methodology, and apply it to the example of electronic services offered via kiosks (since kiosk systems are representative of a wide range of security issues in electronic commerce).

  16. Programmability and service creation for multimedia networks

    SciTech Connect (OSTI)

    Lazar, A.A.; Lim, Koon-Seng

    1996-12-31

    The Binding Architecture is an open architecture for building multimedia networks that must guarantee Quality of Service (QOS). In this paper, we explore the notion of a service in the Binding Architecture and propose a conceptual model for building scalable multimedia distribution services based on it. We begin first by examining the relation between resources, their abstractions and the services that can be built from them and use this to derive a general model for binding. Based on this model, we identify a general set of capabilities required for building any multimedia distribution service. We also describe how these capabilities can be incorporated into our view of the service creation process. Finally, we augment our discussion with the description of an example service which we have developed using this paradigm.

  17. Zenith Energy Services P Ltd ZESL | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Biomass, Services Product: Zenith provides services to project developers, such as feasibility studies, DPR, biomass assessment studies and financial services. References: Zenith...

  18. One Acquisition Solution for Integrated Services (OASIS) - Brad...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Acquisition Solution for Integrated Services (OASIS) - Brad DeMers, General Services Administration (GSA) One Acquisition Solution for Integrated Services (OASIS) - Brad DeMers,...

  19. Cleanergy Investment Service Co Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Cleanergy Investment Service Co Ltd Jump to: navigation, search Name: Cleanergy Investment Service Co Ltd Place: Beijing, China Zip: 100031 Product: Cleanergy Investment Service...

  20. EA-108 Arizona Public Service Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EA-108 Arizona Public Service Company Order authorizing Arizona Public Service to export electric energy to Mexico. PDF icon EA-108 Arizona Public Service.pdf More Documents & ...

  1. EA-200-A American Electric Power Service Corporation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    -A American Electric Power Service Corporation EA-200-A American Electric Power Service Corporation Order authorizing American Electric Power Service Corporation to export electric ...

  2. Texas Department of State Health Services - WIPP Program | Department...

    Office of Environmental Management (EM)

    Texas Department of State Health Services - WIPP Program Texas Department of State Health Services - WIPP Program PDF icon Texas Department of State Health Services - WIPP Program ...

  3. Wuxi Hi New Tech Incubation Service Center | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Hi New Tech Incubation Service Center Jump to: navigation, search Name: Wuxi Hi-New-Tech Incubation Service Center Place: China Sector: Services Product: General Financial & Legal...

  4. Colombia-US Forest Service Program | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    US Forest Service Program Jump to: navigation, search Name Colombia-US Forest Service Program AgencyCompany Organization United States Forest Service Sector Land Focus Area...

  5. Information and Technology Services Office | Department of Energy

    Energy Savers

    Information and Technology Services Office Information and Technology Services Office The Information and Technology Services Office (ITSO) is an office within the Office of...

  6. China-UNEP Green Economy Advisory Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    UNEP Green Economy Advisory Services Jump to: navigation, search Logo: China-UNEP Green Economy Advisory Services Name China-UNEP Green Economy Advisory Services AgencyCompany...

  7. Bi-Con Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Inc Jump to: navigation, search Name: Bi-Con Services Inc Address: 10901 Clay Pike Road Place: Derwent, Ohio Zip: 43733 Sector: Buildings, Efficiency, Services Product:...

  8. Trexler Climate Energy Services TC ES | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Trexler Climate Energy Services TC ES Jump to: navigation, search Name: Trexler Climate + Energy Services (TC + ES) Place: Portland, Oregon Zip: 97214 Sector: Services Product:...

  9. Categorical Exclusion Determinations: NNSA-Service Center | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Service Center Categorical Exclusion Determinations: NNSA-Service Center Categorical Exclusion Determinations issued by NNSA-Service Center. DOCUMENTS AVAILABLE FOR DOWNLOAD May 9, ...

  10. Conergy Renewable Services GmbH | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Renewable Services GmbH Jump to: navigation, search Name: Conergy Renewable Services GmbH Place: Hamburg, Germany Zip: 20537 Sector: Renewable Energy, Services Product: Provides...

  11. Variability of interconnected wind plants: correlation length and its dependence on variability time scale

    DOE PAGES-Beta [OSTI]

    St. Martin, Clara M.; Lundquist, Julie K.; Handschy, Mark A.

    2015-04-02

    The variability in wind-generated electricity complicates the integration of this electricity into the electrical grid. This challenge steepens as the percentage of renewably-generated electricity on the grid grows, but variability can be reduced by exploiting geographic diversity: correlations between wind farms decrease as the separation between wind farms increases. However, how far is far enough to reduce variability? Grid management requires balancing production on various timescales, and so consideration of correlations reflective of those timescales can guide the appropriate spatial scales of geographic diversity grid integration. To answer 'how far is far enough,' we investigate the universal behavior of geographic diversity by exploring wind-speed correlations using three extensive datasets spanning continents, durations and time resolution. First, one year of five-minute wind power generation data from 29 wind farms span 1270 km across Southeastern Australia (Australian Energy Market Operator). Second, 45 years of hourly 10 m wind-speeds from 117 stations span 5000 km across Canada (National Climate Data Archive of Environment Canada). Finally, four years of five-minute wind-speeds from 14 meteorological towers span 350 km of the Northwestern US (Bonneville Power Administration). After removing diurnal cycles and seasonal trends from all datasets, we investigate dependence of correlation length on time scale by digitally high-pass filtering the data on 0.25–2000 h timescales and calculating correlations between sites for each high-pass filter cut-off. Correlations fall to zero with increasing station separation distance, but the characteristic correlation length varies with the high-pass filter applied: the higher the cut-off frequency, the smaller the station separation required to achieve de-correlation. Remarkable similarities between these three datasets reveal behavior that, if universal, could be particularly useful for grid management. For high

  12. Review of the synergies between computational modeling and experimental characterization of materials across length scales

    SciTech Connect (OSTI)

    Dingreville, Rémi; Karnesky, Richard A.; Puel, Guillaume; Schmitt, Jean -Hubert

    2015-11-16

    With the increasing interplay between experimental and computational approaches at multiple length scales, new research directions are emerging in materials science and computational mechanics. Such cooperative interactions find many applications in the development, characterization and design of complex material systems. This manuscript provides a broad and comprehensive overview of recent trends in which predictive modeling capabilities are developed in conjunction with experiments and advanced characterization to gain a greater insight into structure–property relationships and study various physical phenomena and mechanisms. The focus of this review is on the intersections of multiscale materials experiments and modeling relevant to the materials mechanics community. After a general discussion on the perspective from various communities, the article focuses on the latest experimental and theoretical opportunities. Emphasis is given to the role of experiments in multiscale models, including insights into how computations can be used as discovery tools for materials engineering, rather than to “simply” support experimental work. This is illustrated by examples from several application areas on structural materials. In conclusion this manuscript ends with a discussion on some problems and open scientific questions that are being explored in order to advance this relatively new field of research.

  13. Review of the synergies between computational modeling and experimental characterization of materials across length scales

    DOE PAGES-Beta [OSTI]

    Dingreville, Rémi; Karnesky, Richard A.; Puel, Guillaume; Schmitt, Jean -Hubert

    2015-11-16

    With the increasing interplay between experimental and computational approaches at multiple length scales, new research directions are emerging in materials science and computational mechanics. Such cooperative interactions find many applications in the development, characterization and design of complex material systems. This manuscript provides a broad and comprehensive overview of recent trends in which predictive modeling capabilities are developed in conjunction with experiments and advanced characterization to gain a greater insight into structure–property relationships and study various physical phenomena and mechanisms. The focus of this review is on the intersections of multiscale materials experiments and modeling relevant to the materials mechanicsmore » community. After a general discussion on the perspective from various communities, the article focuses on the latest experimental and theoretical opportunities. Emphasis is given to the role of experiments in multiscale models, including insights into how computations can be used as discovery tools for materials engineering, rather than to “simply” support experimental work. This is illustrated by examples from several application areas on structural materials. In conclusion this manuscript ends with a discussion on some problems and open scientific questions that are being explored in order to advance this relatively new field of research.« less

  14. The role of reactant unmixedness, strain rate, and length scale on premixed combustor performance

    SciTech Connect (OSTI)

    Samuelsen, S.; LaRue, J.; Vilayanur, S.

    1995-10-01

    Lean premixed combustion provides a means to reduce pollutant formation and increase combustion efficiency. However, fuel-air mixing is rarely uniform in space and time. This nonuniformity in concentration will lead to relative increases in pollutant formation and decreases in combustion efficiency. The nonuniformity of the concentration at the exit of the premixer has been defined by Lyons (1981) as the {open_quotes}unmixedness.{close_quotes} Although turbulence properties such as length scales and strain rate are known to effect unmixedness, the exact relationship is unknown. Evaluating this relationship and the effect of unmixedness in premixed combustion on pollutant formation and combustion efficiency are an important part of the overall goal of US Department of Energy`s Advanced Turbine Systems (ATS) program and are among the goals of the program described herein. The information obtained from ATS is intended to help to develop and commercialize gas turbines which have (1) a wide range of operation/stability, (2) a minimal amount of pollutant formation, and (3) high combustion efficiency. Specifically, with regard to pollutants, the goals are to reduce the NO{sub x} emissions by at least 10%, obtain less than 20 PPM of both CO and UHC, and increase the combustion efficiency by 5%.

  15. Extending the length and time scales of GramSchmidt Lyapunov vector computations

    SciTech Connect (OSTI)

    Costa, Anthony B.; Green, Jason R.

    2013-08-01

    Lyapunov vectors have found growing interest recently due to their ability to characterize systems out of thermodynamic equilibrium. The computation of orthogonal GramSchmidt vectors requires multiplication and QR decomposition of large matrices, which grow as N{sup 2} (with the particle count). This expense has limited such calculations to relatively small systems and short time scales. Here, we detail two implementations of an algorithm for computing GramSchmidt vectors. The first is a distributed-memory message-passing method using Scalapack. The second uses the newly-released MAGMA library for GPUs. We compare the performance of both codes for LennardJones fluids from N=100 to 1300 between Intel Nahalem/Infiniband DDR and NVIDIA C2050 architectures. To our best knowledge, these are the largest systems for which the GramSchmidt Lyapunov vectors have been computed, and the first time their calculation has been GPU-accelerated. We conclude that Lyapunov vector calculations can be significantly extended in length and time by leveraging the power of GPU-accelerated linear algebra.

  16. Quantitative proteomic analysis of human breast epithelial cells with differential telomere length

    SciTech Connect (OSTI)

    Yu, Li-Rong . E-mail: lyu@ncifcrf.gov; Chan, King C.; Tahara, Hidetoshi; Lucas, David A.; Chatterjee, Koushik; Issaq, Haleem J.; Veenstra, Timothy D. . E-mail: veenstra@ncifcrf.gov

    2007-05-18

    Telomeres play important functional roles in cell proliferation, cell cycle regulation, and genetic stability, in which telomere length is critical. In this study, quantitative proteome comparisons for the human breast epithelial cells with short and long telomeres (184-hTERT{sub L} vs. 184-hTERT{sub S} and 90P-hTERT{sub L} vs. 90P-hTERT{sub S}), resulting from transfection of the human telomerase reverse transcriptase (hTERT) gene, were performed using cleavable isotope-coded affinity tags. More than 2000 proteins were quantified in each comparative experiment, with approximately 77% of the proteins identified in both analyses. In the cells with long telomeres, significant and consistent alterations were observed in metabolism (amino acid, nucleotide, and lipid metabolism), genetic information transmission (transcription and translation regulation, spliceosome and ribosome complexes), and cell signaling. Interestingly, the DNA excision repair pathway is enhanced, while integrin and its ligands are downregulated in the cells with long telomeres. These results may provide valuable information related to telomere functions.

  17. Polycyclic aromatic hydrocarbon-DNA adducts and the CYP1A1 restriction fragment length polymorphism

    SciTech Connect (OSTI)

    Shields, P.G.; Bowman, E.D.; Weston, A.; Harris, C.C.; Sugimura, H.; Caporaso, N.E.; Petruzzelli, S.F. ); Trump, B.F. )

    1992-11-01

    Human cancer risk assessment at a genetic level involves the investigation of carcinogen metabolism and DNA adduct formation. Wide interindividual differences in metabolism result in different DNA adduct levels. For this and other reasons, many laboratories have considered DNA adducts to be a measure of the biologically effective dose of a carcinogen. Techniques for studying DNA adducts using chemically specific assays are becoming available. A modification of the [sup 32]P-postlabeling assay for polycyclic aromatic hydrocarbon DNA adducts described here provides potential improvements in quantification. DNA adducts, however, reflect only recent exposure to carcinogens; in contrast, genetic testing for metabolic capacity indicates the extent to which carcinogens can be activated and exert genotoxic effects. Such studies may reflect both separate and integrated risk factors together with DNA adduct levels. A recently described restriction fragment length polymorphism for the CYP1A1, which codes for the cytochrome P450 enzyme primarily responsible for the metabolic activation of carcinogenic polycyclic aromatic hydrocarbons, has been found to be associated with lung cancer risk in a Japanese population. In a subset of individuals enrolled in a US lung cancer case-control study, no association with lung cancer was found. 17 refs., 3 figs.

  18. Optical microcavities enhance the exciton coherence length and eliminate vibronic coupling in J-aggregates

    SciTech Connect (OSTI)

    Spano, F. C.

    2015-05-14

    The properties of polaritons in J-aggregate microcavities are explored using a Hamiltonian which treats exciton-vibrational coupling and exciton-photon coupling on equal footing. When the cavity mode is resonant with the lowest-energy (0-0) transition in the J-aggregate, two polaritons are formed, the lowest-energy polariton (LP) and its higher-energy partner (P{sub 1}), separated by the Rabi splitting. Strong coupling between the material and cavity modes leads to a decoupling of the exciton and vibrational degrees of freedom and an overall reduction of disorder within the LP. Such effects lead to an expanded material coherence length in the LP which leads to enhanced radiative decay rates. Additional spectral signatures include an amplification of the 0-0 peak coincident with a reduction in the 0-1 peak in the photoluminescence spectrum. It is also shown that the same cavity photon responsible for the LP/P{sub 1} splitting causes comparable splittings in the higher vibronic bands due to additional resonances between vibrationally excited states in the electronic ground state manifold and higher energy vibronic excitons.

  19. A multiple length scale description of the mechanism of elastomer stretching

    DOE PAGES-Beta [OSTI]

    Neuefeind, Joerg C.; Skov, Anne L.; Daniels, John E.; Honkimaeki, Veijo; Jakobsen, Bo; Oddershede, Jette; Poulsen, Henning F.

    2016-10-03

    Conventionally, the stretching of rubber is modeled exclusively by rotations of segments of the embedded polymer chains; i.e. changes in entropy. However models have not been tested on all relevant length scales due to a lack of appropriate probes. Here we present a universal X-ray based method for providing data on the structure of rubbers in the 2–50 Å range. First results relate to the elongation of a silicone rubber. We identify several non-entropic contributions to the free energy and describe the associated structural changes. By far the largest contribution comes from structural changes within the individual monomers, but amongmore » the contributions is also an elastic strain, acting between chains, which is 3–4 orders of magnitude smaller than the macroscopic strain, and of the opposite sign, i.e. extension of polymer chains in the direction perpendicular to the stretch. We find this may be due to trapped entanglements relaxing to positions close to the covalent crosslinks.« less

  20. Effect of Length and Contact Chemistry on the Electronic Structure and Thermoelectric Properties of Molecular Junctions

    SciTech Connect (OSTI)

    Tan, Aaron; Balachandran, Janakiraman; Sadat, Seid; Gavini, Vikram; Dunietz, Barry D.; Jang, Sung-Yeon; Reddy, Pramod

    2011-06-15

    We present a combined experimental and computational study that probes the thermoelectric and electrical transport properties of molecular junctions. Experiments were performed on junctions created by trapping aromatic molecules between gold electrodes. The end groups (-SH, -NC) of the aromatic molecules were systematically varied to study the effect of contact coupling strength and contact chemistry. When the coupling of the molecule with one of the electrodes was reduced by switching the terminal chemistry from -SH to -H, the electrical conductance of molecular junctions decreased by an order of magnitude, whereas the thermopower varied by only a few percent. This has been predicted computationally in the past and is experimentally demonstrated for the first time. Further, our experiments and computational modeling indicate the prospect of tuning thermoelectric properties at the molecular scale. In particular, the thiol-terminated aromatic molecular junctions revealed a positive thermopower that increased linearly with length. This positive thermopower is associated with charge transport primarily through the highest occupied molecular orbital, as shown by our computational results. In contrast, a negative thermopower was observed for a corresponding molecular junction terminated by an isocyanide group due to charge transport primarily through the lowest unoccupied molecular orbital.

  1. Coiled tubing - Operations and services

    SciTech Connect (OSTI)

    Blount, C.G. )

    1993-05-01

    Perhaps the most exciting area of coil tubing technology in the oil and gas industry is the development and testing of specialized tools for improving existing operations or meeting the requirements of new applications and techniques. A new generation of surface equipment and downhole tools will greatly expand through-tubing well servicing utility. This paper provides descriptions of current peripheral devices for concentric well work. It also includes a look at what's needed to meet future challenges and advance this technology. It specifically discusses various forms of fishing tools, power tongs used for bring drill stem, orienting tools for drilling, downhole adjustment tools, steering tools, well casing materials, perforation tools, and various other support equipment.

  2. PIA - HS Web Services (HSWS) | Department of Energy

    Energy Savers

    PIA - HS Web Services (HSWS) PIA - HS Web Services (HSWS) PIA - HS Web Services (HSWS) PDF icon PIA - HS Web Services (HSWS) More Documents & Publications PIA - INL PeopleSoft -...

  3. Category:QuickServiceRestaurant | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    TX Entergy Texas Inc..png SVQuickServiceRestaura... 74 KB SVQuickServiceRestaurant Jackson MS Entergy Mississippi Inc.png SVQuickServiceRestaura... 62 KB SVQuickServiceRestaura...

  4. PIA - HS Web Services (HSWS) | Department of Energy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Web Services (HSWS) PIA - HS Web Services (HSWS) PIA - HS Web Services (HSWS) PIA - HS Web Services (HSWS) (376.72 KB) More Documents & Publications PIA - INL PeopleSoft - Human ...

  5. T-556: BMC PATROL Agent Service Daemon stack-based buffer overflow

    Energy.gov [DOE]

    Stack-based buffer overflow in BMC PATROL Agent Service Daemon for in Performance Analysis for Servers, Performance Assurance for Servers, and Performance Assurance for Virtual Servers 7.4.00 through 7.5.10; Performance Analyzer and Performance Predictor for Servers 7.4.00 through 7.5.10; and Capacity Management Essentials 1.2.00 (7.4.15) allows remote attackers to execute arbitrary code via a crafted length value in a BGS_MULTIPLE_READS command to TCP port 6768.

  6. Energy Service Companies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Savings Performance Contracts » Energy Service Companies Energy Service Companies Energy service companies (ESCOs) develop, design, build, and fund projects that save energy, reduce energy costs, and decrease operations and maintenance costs at their customers' facilities. In general, ESCOs act as project developers for a comprehensive range of energy conservation measures and assume the technical and performance risks associated with a project. ESCOs are distinguished from other firms

  7. FY 2014 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Analysis Department of Energy Office of Acquisition Management Strategic Programs Division (MA-622) January 2016 FY 2014 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Scope 1 Section 2: Methodology 3 Section 3: Findings 5 Section 4: Actions Taken or Planned 6 FY 2014 Service Contract Inventory Analysis Department of Energy 1 Section 1: Scope Service Contract Inventories Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, P.L. 111-117,

  8. FY 2010 Service Contract Inventory Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 Service Contract Inventory Analysis Department of Energy Office of Procurement & Assistance Management Strategic Programs Division (MA-622) January 2012 (REVISED) FY2010 Service Contract Inventory Analysis Department of Energy Contents Page Section 1: Background 1 Section 2: Analysis and Findings 3 Section 3: Next Steps 5 FY2010 Service Contract Inventory Analysis Department of Energy 1 Section 1: Background Section 743 of Division C of the FY 2010 Consolidated Appropriations Act, P.L.

  9. FY 2011 Service Contract Inventory Analysis Plan

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Service Contract Inventory Analysis Plan Department of Energy Office of Procurement & Assistance Management Strategic Programs Division (MA-622) December 2011 Department of Energy FY 2011 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)) and Appendix D of the November 5, 2010 OMB Memorandum on Service Contract

  10. FY 2012 Service Contract Inventory Analysis Plan

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Service Contract Inventory Analysis Plan Department of Energy Office of Acquisition and Project Management Strategic Programs Division (MA-622) December 2012 Department of Energy FY 2012 Service Contract Inventory Plan for Analysis The Department of Energy (DOE) approach will be performed in accordance with the criteria set out in Consolidated Appropriations Act, 2010, (Pub. L. No. 111-117, § 743 (2009)) and Appendix D of the November 5, 2010 OMB Memorandum on Service Contract Inventories, and

  11. Service Contract Inventory | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Service Contract Inventory Service Contract Inventory Section 743(a) of Division C of the Consolidated Appropriations Act, 2010 (Pub. L. 111-117) requires executive agencies covered by the Federal Activities Inventory Reform (FAIR) Act (Pub. L. 105-270), except DoD, to submit to the Office of Management and Budget (OMB) annually an inventory of activities performed by service contractors. The information reported in the inventory will be publicly accessible. In accordance with the FAR 4.17 -

  12. ServiceNow Demo | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Contract Inventory Service Contract Inventory Section 743(a) of Division C of the Consolidated Appropriations Act, 2010 (Pub. L. 111-117) requires executive agencies covered by the Federal Activities Inventory Reform (FAIR) Act (Pub. L. 105-270), except DoD, to submit to the Office of Management and Budget (OMB) annually an inventory of activities performed by service contractors. The information reported in the inventory will be publicly accessible. In accordance with the FAR 4.17 -

  13. Contracting for Support Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Contracting for Support Services Contracting for Support Services What you need to know as a Federal Employee The Department of Energy, like most Federal agencies, spends a significant amount of its contracting budget on support services. While these contracts fulfill continuing and essential needs of the Department, this type of contracting arrangement can present unique situations that require special diligence on the part of Federal employees to ensure that applicable statutes, regulations,

  14. DOE Extends Portsmouth Infrastructure Support Services Contract |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Portsmouth Infrastructure Support Services Contract DOE Extends Portsmouth Infrastructure Support Services Contract July 17, 2015 - 12:00pm Addthis Media Contact Brad Mitzelfelt, 859-219-4035 brad.mitzelfelt@lex.doe.gov LEXINGTON, Ky. - The U.S. Department of Energy (DOE) today announced that it is extending its contract for Infrastructure Support Services at the Portsmouth Gaseous Diffusion Plant site for a period of six months. The contract period for the current

  15. Zerkle wins Governor's Distinguished Public Service award

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Governor's Distinguished Public Service award Zerkle wins Governor's Distinguished Public Service award The award recognizes outstanding contributions to public service and the improvement of government at all levels by private citizens and government employees. October 29, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

  16. Technical Service Agreement (TSA) | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contract Research Technical Service Agreement (TSA) A technical service agreement facilitates small, short time-framed projects for a partner that does not involve research. These agreements may be utilized for data analysis, building a unique piece of equipment or other technical services where the expertise or unique capabilities of the Ames Laboratory are crucial. The boilerplate TSA agreement for non-proprietary work can be can be obtained here and the proprietary work can be obtained here.

  17. Contracting for Support Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    » Contracting for Support Services Contracting for Support Services What you need to know as a Federal Employee The Department of Energy, like most Federal agencies, spends a significant amount of its contracting budget on support services. While these contracts fulfill continuing and essential needs of the Department, this type of contracting arrangement can present unique situations that require special diligence on the part of Federal employees to ensure that applicable statutes,

  18. Small Business Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Small Business Services Small Business Services Small Business Services Below is information regarding, "How to do business with the Department of Energy". These are some recommendations of the fundamentals required of every contractor that wants to partner with the DOE. Register your firm on the System for Award Management (SAM) (www.sam.gov). Please also contact the local procurement technical centers (PTACs) for each state. Please visit the U.S. Small Business Administration's

  19. Voluntary Protection Program Onsite Review, Wackenhut Services,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Incorporated - Nevada - May 2008 | Department of Energy Review, Wackenhut Services, Incorporated - Nevada - May 2008 Voluntary Protection Program Onsite Review, Wackenhut Services, Incorporated - Nevada - May 2008 May 2008 Evaluation to determine whether Wackenhut Services, Incorporated - Nevada is continuing to perform at a level deserving DOE-VPP Star recognition. The Team conducted its review during May 5-8, 2008 to determine whether WSI-NV is continuing to perform at a level deserving

  20. Procuring Architectural and Engineering Services for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability ...

  1. Gamesa Services Brasil Ltda | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Jump to: navigation, search Name: Gamesa Services Brasil Ltda Place: Simes Filho, Estado da Bahia, Brazil Sector: Wind energy Product: Wind farm developer and independent...

  2. Residential Energy Efficiency Customer Service Best Practices

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Residential Energy Efficiency Customer Service Best Practices, call slides and discussion summary, January 22, 2015.

  3. PEPCO Energy Services (Maryland) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    PEPCO Energy Services Place: Maryland Phone Number: 1-877-737-2662 Website: www.pepco.comconnect-with-us Twitter: https:twitter.comPepcoConnect Facebook: https:...

  4. Transmission Services Commercial Systems Support and Development

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Commercial Systems Support and Development Customer Conference Call Agenda This customer conference call will provide updates concerning BPA Transmission Services' commercial...

  5. Energy Management Services LLC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services, Inc coordinates consumers and natural gas supplyers. It also offers marketing and financing consultation. Coordinates: 33.045436, -117.292518 Show Map Loading...

  6. Ameridian Speciality Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    roof installation. The company is involved in solar PV rooftop design, installation and project management. References: Ameridian Speciality Services1 This article is a stub....

  7. Independent Oversight Review, Babcock & Wilcox Technical Services...

    Energy.gov (indexed) [DOE]

    July 2012 Review of the Long Lead Procurement Processed Used by Babcock & Wilcox Technical Services Y-12, LLC for the Uranium Processing Facility Project This report provides the ...

  8. General Services Administration Photovoltaics Project in Sacramento...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Document describes a request for proposal issued for the General Services Administration photovoltaic (PV) project. Download the document. (572.19 KB) More Documents & Publications ...

  9. ENERNOC Load Participation in Ancillary Services

    SciTech Connect (OSTI)

    Breidenbaugh, Aaron

    2011-10-25

    Report on EnerNOC. Description of their demand response for ancillary services in wholesale markets, bilateral programs, and lessons learned. NYISO experience.

  10. Chapter 37 - Service Contracting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7 - Service Contracting Chapter 37 - Service Contracting 37.1_Support_Service_Contracting_0.pdf (201 KB) 37.114_Federal_Contractor_Employee_Roles_in_the_Federal_Workplace_0.pdf (328.13 KB) 37.2_Performance_Based_Service_Acquisition_0.pdf (1022.17 KB) More Documents & Publications Microsoft Word - AcqGuide37pt1 binney Nov 2010 AcqGuide37pt1.doc&#0; Federal and Contractor Employee Roles in the Federal Workplace: New DOE Acquisition Guide Chapter 37.114

  11. Customer Services Handbook, 2010, Office of Administration

    Energy.gov (indexed) [DOE]

    ... Video conference and satellite broadcasts are provided in the auditoriums only. All ... To request delivery or pick up courier service by phone, call: Forrestal: (202) 586-8600; ...

  12. Excepted Service EJ and EK Desk Reference

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1] U.S. DEPARTMENT OF ENERGY Office of the Chief Human Capital Officer 2012 Excepted Service EJ and EK Desk Reference E X E C U T I V E R E S O U R C E S D I V I S I O N [2] Executive Summary The Excepted Service EJ and EK Desk Reference is designed to provide the framework, in conjunction, with the DOE O 329.1 (Excepted Service Authorities for EJ and EK Pay Plans). Specifically, the desk reference addresses the requirements for the Excepted Service EJ and EK positions, to include: * Description

  13. Fulcrum Power Services LP | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Name: Fulcrum Power Services LP Place: Houston, Texas Zip: 77056 Product: fulcrum is an energy management solutions provider for managing power generation assets and load serving...

  14. Former Worker Program Summary of Services

    Energy.gov [DOE]

    The summary of services provides a listing of the DOE sites, by state, served by the Former Worker Medical Screening Program.

  15. GGAM Electrical Services Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Name: GGAM Electrical Services Ltd Place: Limassol, Cyprus Zip: 3071 Product: An electronics wholesaler and installation company. Coordinates: 34.683338, 33.051109 Show Map...

  16. Vermont Public Service Board | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    of service, and overall financial management of Vermont's public utilities: cable television, electric, gas, telecommunications, water and large wastewater companies. Retrieved...

  17. People's Cooperative Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Cooperative Services Place: Minnesota Website: www.peoplesrec.com Twitter: @Peoplesrec Facebook: https:www.facebook.compagesPeoples-Energy-Cooperative221329051329935 Outage...

  18. PEPCO Energy Services (Massachusetts) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Phone Number: 1-877-737-2662 Website: www.pepcoenergy.com Twitter: @PepcoConnect Facebook: https:www.facebook.compagesPepco-Energy-Services Outage Hotline:...

  19. Champion Energy Services (Illinois) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Number: 888.653.0087 Website: www.championenergyservices.com Twitter: @championenergy Facebook: https:www.facebook.comChampionEnergyServices Outage Hotline: 1.800.334.7661...

  20. HiTek Services | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Name: HiTek Services Place: Huntsville, Alabama Product: Alabama based industrial automation company. Coordinates: 41.26067, -111.771274 Show Map Loading map......