National Library of Energy BETA

Sample records for numerous energy-related surveys

  1. Environmental Survey preliminary report, Laboratory for Energy-Related Health Research, Davis, California

    SciTech Connect (OSTI)

    Not Available

    1988-03-01

    This report presents the preliminary findings from the first phase of the Survey of the United States Department of Energy (DOE) Laboratory for Energy-Related Health Research (LEHR) at the University of California, Davis (UC Davis), conducted November 16 through 20, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LEHR. The Survey covers all environmental media and all areas of environmental regulation, and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the LEHR and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the LEHR at UC Davis. The Interim Report will reflect the final determinations of the LEHR Survey. 75 refs., 26 figs., 23 tabs.

  2. A survey of numerical cubature over triangles

    SciTech Connect (OSTI)

    Lyness, J.N.; Cools, R.

    1993-12-31

    This survey collects together theoretical results in the area of numerical cubature over triangles and is a vehicle for a current bibliography. We treat first the theory relating to regular integrands and then the corresponding theory for singular integrands with emphasis on the ``full comer singularity.`` Within these two sections we treat successively approaches based on transforming the triangle into a square, formulas based on polynomial moment fitting, and extrapolation techniques. Within each category we quote key theoretical results without proof, and relate other results and references to these. Nearly all the references we have found may be readily placed in one of these categories. This survey is theoretical in character and does not include recent work in adaptive and automatic integration.

  3. Energy-related manpower, 1985

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This report provides information about current and potential employment requirements and the relative adequacy of labor supplies for energy R and D and commercial energy activities, with special attention to scientific and engineering personnel. Since the oil embargo of 1973, major domestic and international changes have occurred in economies, political relationships, and energy production, markets, and prices. These changes, with concurrent modification in federal policy emphasis and programs, have altered energy production, conservation, and R and D activities sufficiently to affect employment requirements and educational needs. This is the fourth annual energy-related manpower report. It provides basic information for both public and private policymakers, educators, legislators, program managers, and others concerned with the labor market for scientists and engineers. It also provides information about future job opportunities for those interested in energy-related careers.

  4. Energy-Related Carbon Emissions in Manufacturing

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Energy-Related Carbon Emissions Detailed Energy-Related Carbon Emissions All Industry Groups 1994 emissions Selected Industries Petroleum refining Chemicals Iron & Steel...

  5. Energy-Related Carbon Emissions in Manufacturing

    Reports and Publications

    2000-01-01

    Energy-related carbon emissions in manufacturing analysis and issues related to the energy use, energy efficiency, and carbon emission indicators.

  6. Energy-related laboratory equipment (ERLE) guidelines

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    This document describes the Used Energy-Related Laboratory Equipment grants, and eligibility and procedures for participation. The document contains tables identifying typical equipment that may be requested, where to review ERLE equipment lists, and where to mail applications, a description of the eligible equipment grants access data system, and a copy of the ERLE grant application and instructions for its completion and submission.

  7. Energy-Related Carbon Emissions, by Industry, 1994

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Efficiency Page > Energy Energy-Related Carbon Emissions > Total Table Total Energy-Related Carbon Emissions for Manufacturing Industries, 1994 Carbon Emissions (million...

  8. Laboratory for Energy-Related Health Research, California, Site...

    Office of Legacy Management (LM)

    Fact Sheet Laboratory for Energy-Related Health Research, California, Site This fact sheet provides information about the Laboratory for Energy-Related Health Research, California, ...

  9. Laboratory of Energy-Related Health Research, California, Site

    SciTech Connect (OSTI)

    2015-08-05

    This fact sheet provides information about the Laboratory of Energy-Related Health Research, California, Site

  10. Energy related environmental policies in Turkey

    SciTech Connect (OSTI)

    Kaygusuz, K.; Bilgen, S.

    2008-07-01

    There is increasing consensus in both the scientific and political communities that significant reductions in greenhouse gas (GHG) emissions are necessary to limit the magnitude and extent of climate change. Renewable energy systems already reduce GHG emissions from the energy sector, although on a modest scale. Turkey is heavily dependent on expensive imported energy resources (oil, gas, and coal) that place a big burden on the economy, and air pollution is becoming a great environmental concern in the country. In this regard, renewable energy resources appear to be one of the most efficient and effective solutions for clean and sustainable energy development in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. This article presents a review of the energy related environmental policies in Turkey.

  11. Clark Atlanta Universities (CAU) Energy Related Research Capabilities |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Clark Atlanta Universities (CAU) Energy Related Research Capabilities Clark Atlanta Universities (CAU) Energy Related Research Capabilities How energy related research has helped Clark Atlanta University. Clark Atlanta Universities (CAU) Energy Related Research Capabilities (1.62 MB) More Documents & Publications 2008-2009 Winter Fuels Outlook Conference Ronald Reagan Building and International Trade Center HYDROGEN AND FUEL CELL EDUCATION AT CALIFORNIA STATE

  12. Estimates of State Energy-Related Carbon Dioxide Emissions

    U.S. Energy Information Administration (EIA) (indexed site)

    November 2016 Estimates of State Energy-Related Carbon Dioxide Emissions Because energy-related carbon dioxide (CO2) constitutes over 80% of total emissions, the state energy- related CO2 emission levels provide a good indicator of the relative contribution of individual states to total greenhouse gas emissions. The U.S. Energy Information Administration (EIA) emissions estimates at the state level for energy-related CO2 are based on data contained in the State Energy Data System (SEDS). 1 The

  13. Energy-Related Carbon Dioxide Emissions in U.S. Manufacturing

    Reports and Publications

    2006-01-01

    Based on the Manufacturing Energy Consumption Survey (MECS) conducted by the U.S. Department of Energy, Energy Information Administration (EIA), this paper presents historical energy-related carbon dioxide emission estimates for energy-intensive sub-sectors and 23 industries. Estimates are based on surveys of more than 15,000 manufacturing plants in 1991, 1994, 1998, and 2002. EIA is currently developing its collection of manufacturing data for 2006.

  14. Jointly Sponsored Research Program Energy Related Research

    SciTech Connect (OSTI)

    Western Research Institute

    2009-03-31

    Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental impacts

  15. Surveys

    Energy.gov [DOE]

    Surveys can be a useful way to gauge the opinions of your readers and learn more about your website's audiences, but you'll often need approval from the Office of Management and Budget (OMB) to run...

  16. FACT SHEET: Examples of Administration Activities for Energy-Related

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Employment and Workforce Training | Department of Energy FACT SHEET: Examples of Administration Activities for Energy-Related Employment and Workforce Training FACT SHEET: Examples of Administration Activities for Energy-Related Employment and Workforce Training FACT SHEET: Examples of Administration Activities for Energy-Related Employment and Workforce Training Solar Ready Vets Program: DOE, in partnership with the Department of Defense (DoD), is launching a Solar Ready Vets program at 10

  17. EIA Energy Efficiency-Energy Related Greenhouse Gas Emissions...

    U.S. Energy Information Administration (EIA) (indexed site)

    Related Greenhouse Gas Emissions Links Energy Related Greenhouse Gas Emissions Links Posted Date: May 2007 Page Last Modified: September 2010 EIA Links Disclaimer: These pages...

  18. Energy related applications of elementary particle physics

    SciTech Connect (OSTI)

    Rafelski, J.

    1989-10-30

    Study of muon catalysis of nuclear fusion and phenomena commonly referred to as cold fusion has been central to our effort. Muon catalyzed fusion research concentrated primarily on the identification of energy efficient production of muons, and the understanding and control of the density dependence of auto-poisoning (sticking) of the catalyst. We have also developed the in-flight fusion description of the t{mu}-d reaction, and work in progress shows promise in explaining the fusion cycle anomalies and smallness of sticking as a consequence of the dominant role of such reactions. Our cold fusion work involved the exploration of numerous environments for cold fusion reactions in materials used in the heavy water electrolysis, with emphasis on reactions consistent with the conventional knowledge of nuclear physics reactions. We then considered the possibility that a previously unobserved ultra-heavy particle X{sup {minus}} is a catalyst of dd fusion, explaining the low intensity neutrons observed by Jones et. al. 29 refs.

  19. (Energy related studies utilizing microline thermochronology)

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    In our first year of the current funding cycle, we have investigated three interrelated aspects of K-feldspar thermochronology; (1) the Ar diffusion properties and microstructures of K-feldspars, (2) the thermal evolution of the Valles Caldera and (3) the continued development of microanalysis. Results of TEM and light microscopy on heated and unheated samples of MH-10 K-feldspar reveal three classes of substructure are present: (1) cross hatched extinction is common and there is almost no albite/pericline twinning, only tweed microstructure; (2) 5--10 vol. % of this K-feldspar are turbid zones with complex twin and tweed structures at the sub-micron scale and numerous dislocation and strain features; (3) about 20% of the K-feldspar is comprised of 0.01 {times} 0.2-1{mu}m albite exsolution lamellae. The network of fractured/turbid zones divides the sample into blocks of approximately 50 {mu}m and the separation between albite exsolution lamellae produce K-feldspar domains of the order 0.1 {mu}m. Independent crushing and diffusion experiments suggest the scale of the largest domain is order ten's of micron whereas the smallest domain size is inferred to be {approximately}0.1 {mu}m. Many, and perhaps most, alkali feldspars contain diffusion domains with activation energies that may vary by as much as 8 kcal/mol. An extraordinary consequence of even relatively small variations in activation energy between domains is that the shape of an age spectrum can change dramatically by varying the laboratory heating schedule. We have performed {sup 40}Ar/{sup 39}Ar age spectrum experiments on K-feldspar separated from Proterozoic quartz monzonite taken from a depth of 1.76 km down the VC-2B drill hole, Valles Caldera, north-central New Mexcio.

  20. Federal Buildings Supplemental Survey -- Overview

    U.S. Energy Information Administration (EIA) (indexed site)

    Buildings The Federal Buildings Supplemental Survey 1993 provides building-level energy-related characteristics for a special sample of commercial buildings owned by the...

  1. Glossary of Energy-Related Terms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Glossary of Energy-Related Terms Glossary of Energy-Related Terms August 20, 2013 - 9:20am Addthis Here you'll find a glossary of energy-related terms. A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z A Absolute Humidity The ratio of the mass of water vapor to the volume occupied by a mixture of water vapor and dry air. Absorbent A material that extracts one or more substances from a fluid (gas or liquid) medium on contact, and which changes

  2. U.S. Energy-Related Carbon Dioxide Emissions, 2014

    U.S. Energy Information Administration (EIA) (indexed site)

    Related Carbon Dioxide Emissions, 2014 November 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 November 2015 U.S. Energy Information Administration | U.S. Energy-Related Carbon Dioxide Emissions, 2014 1 November 2015 U.S. Energy Information Administration | U.S. Energy-Related Carbon Dioxide Emissions, 2014 2 November 2015 U.S. Energy Information Administration | U.S. Energy-Related Carbon Dioxide Emissions, 2014 3 November 2015 U.S. Energy

  3. U.S. Energy-Related Carbon Dioxide Emissions, 2013

    Annual Energy Outlook

    Energy-Related Carbon Dioxide Emissions, 2013 October 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 October 2014 U.S. Energy...

  4. Table 21. Total Energy Related Carbon Dioxide Emissions, Projected...

    U.S. Energy Information Administration (EIA) (indexed site)

    Total Energy Related Carbon Dioxide Emissions, Projected vs. Actual Projected (million metric tons) 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 ...

  5. "Table 21. Total Energy Related Carbon Dioxide Emissions, Projected...

    U.S. Energy Information Administration (EIA) (indexed site)

    Total Energy Related Carbon Dioxide Emissions, Projected vs. Actual" "Projected" " (million metric tons)" ,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,200...

  6. Executive Order 13212 - Actions To Expedite Energy-Related Projects:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Federal Register Notice Volume 66, No. 99 - May 18, 2001 | Department of Energy Executive Order 13212 - Actions To Expedite Energy-Related Projects: Federal Register Notice Volume 66, No. 99 - May 18, 2001 Executive Order 13212 - Actions To Expedite Energy-Related Projects: Federal Register Notice Volume 66, No. 99 - May 18, 2001 The increased production and transmission of energy in a safe and environmentally sound manner is essential to the well-being of the American people. In general, it

  7. Technology diffusion of energy-related products in residential markets

    SciTech Connect (OSTI)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  8. Chapter 9 - Energy-related CO2 emission

    Gasoline and Diesel Fuel Update

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Chapter 9 Energy-related CO2 emissions Overview Because anthropogenic emissions of carbon dioxide (CO2) result primarily from the combustion of fossil fuels, energy consumption is at the center of the climate change debate. In the International Energy Outlook 2016 (IEO2016) Reference case, world energy- related CO2 emissions 331 increase from 32.3 billion metric tons in 2012 to 35.6 billion metric tons in 2020 and to

  9. The Economic, Energy, and Environmental Impacts of the Energy-Related Inventions Program

    DOE R&D Accomplishments [OSTI]

    Brown, M.A.; Wilson, C.R.; Franchuk, C.A.; Cohn, S.M.; Jones, D.

    1994-07-01

    This report provides information on the economic, energy, and environmental impacts of inventions supported by the Energy-Related Inventions Program (ERIP) -- a program jointly operated by the US Department of Energy and the National Institute of Standards and Technology (NIST). It describes the results of the latest in a series of ERIP evaluation projects that have been completed since 1980. The period of interest is 1980 through 1992. The evaluation is based on data collected in 1993 through mail and telephone surveys of 253 program participants, and historical data collected during previous evaluations for an additional 189 participants.

  10. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    2 Table 4. 2013 state energy-related carbon dioxide emission shares by sector percent of ... Administration | Energy-Related Carbon Dioxide Emissions at the State Level, ...

  11. Energy-related indoor environmental quality research: A priority agenda

    SciTech Connect (OSTI)

    Fisk, W.J.; Brager, G.; Burge, H.; Cummings, J.; Levin, H.; Loftness, V.; Mendell, M.J.; Persily, A.; Taylor, S.; Zhang, J.S.

    2002-08-01

    A multidisciplinary team of IEQ and energy researchers has defined a program of priority energy-related IEQ research. This paper describes the methods employed to develop the agenda, and 35 high priority research and development (R&D) project areas related to four broad goals: (1) identifying IEQ problems and opportunities; (2) developing and evaluating energy-efficient technologies for improving IEQ; (3) developing and evaluating energy-efficient practices for improving IEQ; and (4) encouraging or assisting the implementation of technologies or practices for improving IEQ. The identified R&D priorities reflect a strong need to benchmark IEQ conditions in small commercial buildings, schools, and residences. The R&D priorities also reflect the need to better understand how people are affected by IEQ conditions and by the related building characteristics and operation and maintenance practices. The associated research findings will provide a clearer definition of acceptable IEQ that is required to guide the development of technologies, practices, standards, and guidelines. Quantifying the effects of building characteristics and practices on IEQ conditions, in order to provide the basis for development of energy efficient and effective IEQ control measures, was also considered a priority. The development or advancement in a broad range of IEQ tools, technologies, and practices are also a major component of the priority research agenda. Consistent with the focus on ''energy-related'' research priorities, building ventilation and heating, ventilating and air conditioning (HVAC) systems and processes are very prominent in the agenda. Research related to moisture and microbiological problems, particularly within hot and humid climates, is also prominent within the agenda. The agenda tends to emphasize research on residences, small commercial buildings, and schools because these types of buildings have been underrepresented in prior research. Most of the research areas

  12. Manufacturing Energy Consumption Survey (MECS) - Data - U.S....

    U.S. Energy Information Administration (EIA) (indexed site)

    Archive MECS Survey Data 2010 | 2006 | 2002 | 1998 | 1994 | 1991 | Archive Special Reports (click on table headings to sort) Title Release Year Cycle Year Format Energy-Related...

  13. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  14. Jointly Sponsored Research Program on Energy Related Research

    SciTech Connect (OSTI)

    No, author

    2013-12-31

    Cooperative Agreements, DE-FC26-08NT43293, DOE-WRI Cooperative Research and Development Program for Fossil Energy-Related Resources began in June 2009. The goal of the Program was to develop, commercialize, and deploy technologies of value to the nation’s fossil and renewable energy industries. To ensure relevancy and early commercialization, the involvement of an industrial partner was encouraged. In that regard, the Program stipulated that a minimum of 20% cost share be achieved in a fiscal year. This allowed WRI to carry a diverse portfolio of technologies and projects at various development technology readiness levels. Depending upon the maturity of the research concept and technology, cost share for a given task ranged from none to as high as 67% (two-thirds). Over the course of the Program, a total of twenty six tasks were proposed for DOE approval. Over the period of performance of the Cooperative agreement, WRI has put in place projects utilizing a total of $7,089,581 in USDOE funds. Against this funding, cosponsors have committed $7,398,476 in private funds to produce a program valued at $14,488,057. Tables 1 and 2 presented at the end of this section is a compilation of the funding for all the tasks conducted under the program. The goal of the Cooperative Research and Development Program for Fossil Energy-Related Resources was to through collaborative research with the industry, develop or assist in the development of innovative technology solutions that will: • Increase the production of United States energy resources – coal, natural gas, oil, and renewable energy resources; • Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; • Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and • Minimize environmental impacts of energy production and utilization. Success of the Program can be measured by several

  15. User Survey | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Survey User Survey Results The ALCF conducts yearly surveys to gain a better understanding of how we can improve the user experience at ALCF. Below are the numeric results of these surveys. 2015 ALCF User Survey Results 2014 ALCF User Survey Results 2013 ALCF User Survey Results 2012 ALCF User Survey Results 2011 ALCF User Survey Results 2010 ALCF User Survey Results 2009 ALCF User Survey Results 2008 ALCF User Survey Results

  16. Table 5. Per capita energy-related carbon dioxide emissions by...

    U.S. Energy Information Administration (EIA) (indexed site)

    Per capita energy-related carbon dioxide emissions by State (2000-2011)" "metric tons of carbon dioxide per person" ,,,"Change" ,,,"2000 to 2011"...

  17. Table 2. 2011 State energy-related carbon dioxide emissions by...

    U.S. Energy Information Administration (EIA) (indexed site)

    2011 State energy-related carbon dioxide emissions by fuel " ,"million metric tons of carbon dioxide",,,,,"shares" "State","Coal","Petroleum","Natural Gas ","Total",,"Coal","Petrol...

  18. Table 3. 2011 State energy-related carbon dioxide emissions by...

    U.S. Energy Information Administration (EIA) (indexed site)

    2011 State energy-related carbon dioxide emissions by sector " "million metric tons of carbon dioxide" "State","Commercial","Electric Power","Residential","Industrial","Transportat...

  19. Table 1. State energy-related carbon dioxide emissions by year...

    U.S. Energy Information Administration (EIA) (indexed site)

    State energy-related carbon dioxide emissions by year (2000-2011)" "million metric tons of carbon dioxide" ,,,"Change" ,,,"2000 to 2011" "State",2000,2001,2002,...

  20. Table 4. 2011 State energy-related carbon dioxide emission shares...

    U.S. Energy Information Administration (EIA) (indexed site)

    2011 State energy-related carbon dioxide emission shares by sector " "percent of total" ,"shares" "State","Commercial","Electric Power","Residential","Industrial","Transportation"...

  1. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    0 Table 3. 2013 state energy-related carbon dioxide emissions by sector million metric tons carbon dioxide State Commercial Electric Power Residential Industrial Transportation ...

  2. (Energy related studies utilizing K-feldspar thermochronology)

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    In our second year of current funding cycle, we have investigated the Ar diffusion properties and microstructures of K-feldspars and the application of domain theory to natural K-feldspars. We completed a combined TEM and argon diffusion study of the effect of laboratory heat treatment on the microstructure and kinetic properties of K-feldspar. We conclude in companion papers that, with one minor exception, no observable change in the diffusion behavior occurs during laboratory extraction procedures until significant fusion occurs at about 1100{degrees}C. The effect that is observed involves a correlation between the homogenization of cryptoperthite lamelle and the apparent increase in retentivity of about 5% of the argon in the K-feldspar under study. We can explain this effect of both as an artifact of the experiment or the loss of a diffusion boundary. Experiments are being considered to resolve this question. Refinements have been made to our experimental protocol that appears that greatly enhance the retrieval of multi-activation energies from K-feldspars. We have applied the multi-domain model to a variety of natural environments (Valles Caldera, Red River fault, Appalachian basin) with some surprising results. Detailed {sup 40}Ar/{sup 39} Ar coverage of the Red River shear zone, thought to be responsible for the accommodation of a significant fraction of the Indo-Asian convergence, strongly suggests that our technique can precisely date both the termination of ductile strike-slip motion and the initiation of normal faulting. Work has continued on improving our numerical codes for calculating thermal histories and the development of computer based graphing tools has significantly increased our productivity.

  3. Treatment approach, delivery, and follow-up evaluation for cardiac rhythm disease management patients receiving radiation therapy: Retrospective physician surveys including chart reviews at numerous centers

    SciTech Connect (OSTI)

    Gossman, Michael S.; Wilkinson, Jeffrey D.; Mallick, Avishek

    2014-01-01

    In a 2-part study, we first examined the results of 71 surveyed physicians who provided responses on how they address the management of patients who maintained either a pacemaker or a defibrillator during radiation treatment. Second, a case review study is presented involving 112 medical records reviewed at 18 institutions to determine whether there was a change in the radiation prescription for the treatment of the target cancer, the method of radiation delivery, or the method of radiation image acquisition. Statistics are provided to illustrate the level of administrative policy; the level of communication between radiation oncologists and heart specialists; American Joint Committee on Cancer (AJCC) staging and classification; National Comprehensive Cancer Network (NCCN) guidelines; tumor site; patient's sex; patient's age; device type; manufacturer; live monitoring; and the reported decisions for planning, delivery, and imaging. This survey revealed that 37% of patient treatments were considered for some sort of change in this regard, whereas 59% of patients were treated without regard to these alternatives when available. Only 3% of all patients were identified with an observable change in the functionality of the device or patient status in comparison with 96% of patients with normal behavior and operating devices. Documented changes in the patient's medical record included 1 device exhibiting failure at 0.3-Gy dose, 1 device exhibiting increased sensor rate during dose delivery, 1 patient having an irregular heartbeat leading to device reprogramming, and 1 patient complained of twinging in the chest wall that resulted in a respiratory arrest. Although policies and procedures should directly involve the qualified medical physicist for technical supervision, their sufficient involvement was typically not requested by most respondents. No treatment options were denied to any patient based on AJCC staging, classification, or NCCN practice standards.

  4. The energy-related inventions program: Continuing benefits to the inventor community

    SciTech Connect (OSTI)

    Braid, R.B. Jr.; Brown, M.A.; Wilson, C.R.; Franchuk, C.A.; Rizy, C.G.

    1996-10-01

    This report provides information on the economic, energy, and environmental impacts of inventions supported by the Energy-Related Inventions Program (ERIP) - a technology commercialization program jointly operated by the U.S. Department of Energy (DOE) and the National Institute of Standards and Technology (NIST). It describes the results of the latest in a series of ERIP evaluation projects that have been completed since 1980. The period of interest is 1980 through 1994. The evaluation is based on data collected in 1995 through mail and telephone surveys of 211 program participants, and historical data collected during previous evaluations for an additional 253 participants. As of September 1993, a total of 609 inventions had been recommended to DOE by NIST, which screens all submitted inventions for technical merit, potential for commercial success, and potential energy impact. By the end of 1994, at least 144 (or 24%) of these inventions had entered the market, generating total cumulative sales of $961 million (in 19944). It is estimated that in 1994 ERIP inventors earned royalties of $2.3 million, and over the lifetime of the program, royalties total $28.2 million. With $47.5 million in grants awarded from 1975 through 1994 and $124 million in program appropriations over the same period, ERIP has generated a 20:1 return in terms of sales values to grants, and an 8:1 return in sales versus program appropriations. Further, it is estimated that at least 757 job-years of employment were supported by ERIP technologies in 1994, and that this resulted in a return of approximately $3.4 million in individual income taxes to the U.S. Treasury. Finally, approximately $334 million of energy expenditures were saved in 1994 as a result of the commercial success of five ERIP projects. These energy savings resulted in reduced emissions of 2.1 million metric tons of carbon in 1994 alone.

  5. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy-Related Carbon Dioxide Emissions at the State Level, 2000-2013 October 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. ...

  6. Question of the Week: Are You Considering an Energy-Related Career...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Question of the Week: Are You Considering an Energy-Related Career? February 26, 2009 - 4:00am Addthis On Tuesday, Amy wrote about resources to help you further your education and ...

  7. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    8 Table 7. Carbon intensity by state (2000-2013) kilograms of energy-related carbon dioxide per million Btu Change (2000-2013) State 2000 2001 2002 2003 2004 2005 2006 2007 2008 ...

  8. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    6 Table 1. State energy-related carbon dioxide emissions by year (2000-2013) million metric tons carbon dioxide Change (2000-2013) State 2000 2001 2002 2003 2004 2005 2006 2007 ...

  9. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    20 Table 8. Carbon intensity of the economy by state (2000-2013) metric tons of energy-related carbon dioxide per million chained 2009 dollars of GDP Change (2000-2013) State 2000 ...

  10. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    4 Table 5. Per capita energy-related carbon dioxide emissions by state (2000-2013) metric tons carbon dioxide per person Change (2000-2013) State 2000 2001 2002 2003 2004 2005 2006 ...

  11. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    ... 10.8 -14.3% -1.8 October 2015 U.S. Energy Information Administration | Energy-Related Carbon Dioxide Emissions at the State Level, 2000-2013 17 Table 6. Energy intensity by state ...

  12. Energy-Related Carbon Dioxide Emissions at the State Level, 2000...

    U.S. Energy Information Administration (EIA) (indexed site)

    8 Table 2. 2013 state energy-related carbon dioxide emissions by fuel million metric tons of carbon dioxide Shares State Coal Petroleum Natural Gas Total Coal Petroleum Natural Gas ...

  13. Energy-related doctoral scientists and engineers in the United States, 1977

    SciTech Connect (OSTI)

    Not Available

    1980-04-01

    Information is compiled about the number and characteristics of doctoral-level engineers and scientists in primarily energy-related activities. These data are for the year 1977 and are part of the data base for a program of continuing studies on the employment and utilization of all scientists and engineers involved in energy-related activities. Data on mathematics, physics, chemistry, environmental engineering, engineering, life sciences, psychology, and social sciences doctoral degree specialties are included.

  14. EO 13212: Actions To Expedite Energy-Related Projects (2001) | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy 212: Actions To Expedite Energy-Related Projects (2001) EO 13212: Actions To Expedite Energy-Related Projects (2001) The increased production and transmission of energy in a safe and environmentally sound manner is essential to the well-being of the American people. In general, it is the policy of this Administration that executive departments and agencies (agencies) shall take appropriate actions, to the extent consistent with applicable law, to expedite projects that will

  15. Federal Facility Agreement for the Laboratory for Energy-Related Health Research Summary

    Office of Environmental Management (EM)

    Energy Related Health Research Agreement Name Federal Facility Agreement for the Laboratory for Energy- Related Health Research State California Agreement Type Federal Facility Agreement Legal Driver(s) CERCLA/RCRA Scope Summary Establish a procedural framework and schedule for developing, implementing and monitoring appropriate response actions at LEHR Parties DOE; USEPA; California Department of Toxic Substances Control; Central Valley Regional Water Quality Control Board; California

  16. Get energy-related lab equipment for schools | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information energy-related lab equipment for schools Back to the OSTI News Listing for 2011 Energy-related lab equipment is available to qualifying middle schools, high schools, universities, colleges, junior colleges, technical institutes, museums, or hospitals in the United States for use in energy oriented educational programs. The equipment is available for a limited time and is granted on a first-received application, first-qualified basis. The listing

  17. Residential Energy Consumption Survey: Quality Profile

    SciTech Connect (OSTI)

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  18. Energy-related applications of helium: a revision of the ERDA-13 data base

    SciTech Connect (OSTI)

    Hammel, E.F.; Krupka, M.C.

    1980-08-01

    A re-examination, revision, and re-evaluation of the data base contained within the 1975 document, ERDA-13, The Energy-Related Applications of Helium, were completed and results are presented in this report. New technical and resource data, current legislative proposals, updated supply-and-demand relationships, latest legal developments, programmatic changes affectng the future demand for helium, socio-economic aspects, and the effects of the latest energy-consumption projections were considered and are discussed. In contrast to ERDA-13, however, explicit recommendations with respect to the formulation of Federal helium policy, as it pertains to the energy-related applications of helium, are not given.

  19. International Energy Outlook 2016-Energy-related CO2 emissions - Energy

    Gasoline and Diesel Fuel Update

    Information Administration 9. Energy-related CO2 emissions print version Overview Because anthropogenic emissions of carbon dioxide (CO2) result primarily from the combustion of fossil fuels, energy consumption is at the center of the climate change debate. In the International Energy Outlook 2016 (IEO2016) Reference case, world energy-related CO2 emissions [331] increase from 32.3 billion metric tons in 2012 to 35.6 billion metric tons in 2020 and to 43.2 billion metric tons in 2040. The

  20. Los Alamos Scientific Laboratory energy-related history, research, managerial reorganization proposals, actions taken, and results. History report, 1945--1979

    SciTech Connect (OSTI)

    Hammel, E.F.

    1997-03-01

    This report documents the development of major energy-related programs at the Los Alamos Scientific Laboratory between 1945 and 1979. Although the Laboratory`s primary mission during that era was the design and development of nuclear weapons and most of the Laboratory`s funding came from a single source, a number of factors were at work that led to the development of these other programs. Some of those factors were affected by the Laboratory`s internal management structure and organization; others were the result of increasing environmental awareness within the general population and the political consequences of that awareness; still others were related to the increasing demand for energy and the increasing turmoil in the energy-rich Middle East. This report also describes the various activities in Los Alamos, in Washington, and in other areas of the world that contributed to the development of major energy-related programs at Los Alamos. The author has a unique historical perspective because of his involvement as a scientist and manager at the Los Alamos Scientific Laboratory during the time period described within the report. In addition, in numerous footnotes and references, he cites a large body of documents that include the opinions and perspectives of many others who were involved at one time or another in these programs. Finally the report includes a detailed chronology of geopolitical events that led to the development of energy-related programs at Los Alamos.

  1. Question of the Week: Do Energy-Related Financial Incentives Prompt You to Be More Energy Efficient?

    Energy.gov [DOE]

    Do energy-related financial incentives or assistance programs prompt you to be more energy efficient or to purchase products that can help you save energy?

  2. Virtual library of Energy-related research info revamped and ready for

    Office of Scientific and Technical Information (OSTI)

    searchers | OSTI, US Dept of Energy Office of Scientific and Technical Information Virtual library of Energy-related research info revamped and ready for searchers Back to the OSTI News Listing for 2011 EnergyFiles has been revamped and now searches over 50 databases of science information in fields relevant to the U.S. Department of Energy (DOE). Topics include biology and medicine, fission and nuclear technologies, geophysics, materials science, mathematics, renewable energy, and more. You

  3. Used energy-related laboratory equipment grant program for institutions of higher learning. Eligible equipment catalog

    SciTech Connect (OSTI)

    Not Available

    1986-07-01

    The United States Department of Energy (DOE), in accordance with its responsibility to encourage research and development in the energy area, awards grants of used energy-related laboratory equipment to universities and colleges and other nonprofit educational institutions of higher learning in the United States for use in energy-oriented educational programs in the life, physical and environmental sciences and engineering. Proposals for the grant of available equipment in this program should be submitted by eligible non-profit educational institution to the DOE Field Office responsible for the site where the specific equipment is known to be located.

  4. Environmental audit of the Laboratory for Energy-Related Health Research (LEHR)

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    This report documents the results of the environmental audit conducted at the Laboratory for Energy-Related Health Research, Environmental Restoration (LEHR-ER) Project at University of California-Davis (UCD), Davis, California. The scope of the audit at the LEHR-ER was comprehensive, addressing environmental activities in the technical areas of air; surface water/drinking water; groundwater and soils/sediment/biota; waste management; toxic and chemical materials; inactive waste sites; radiation; quality assurance; and environmental management. Specifically assessed was the compliance of LEHR-ER operations and activities with Federal, state, and local regulations; DOE Orders; and best management practices (BMPs).

  5. Energy-related pollution of semi-tropical and tropical nearshore ecosystems. Annual report, 1981-1982

    SciTech Connect (OSTI)

    Thorhaug, A.; Marcus, J.H.

    1982-01-01

    The major components of the nearshore marine ecosystems in the subtropics and tropics (seagrasses, mangroves, and corals) are examined and compound sublethal and lethal effects from extremes in some energy-related effects (temperature, salinity and light) are discussed.

  6. Laboratory for Energy-Related Health Research (LEHR) University of California at Davis, California. Final report

    SciTech Connect (OSTI)

    1997-09-01

    This Annual Site Environmental Report for the Laboratory for Energy-Related Health Research (LEHR) Site (the Site) includes 1996 environmental monitoring data for Site air, soil, ground water, surface water, storm water and ambient radiation. DOE operation of LEHR as a functioning research location ceased in 1989, after the completion of three decades of research on the health effects of low-level radiation exposure (primarily strontium-90 and radium-226), using beagles to simulate effects on human health. During 1996, the U.S. Department of Energy (DOE) conducted activities at the Site in support of Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Environmental remediation and the decontamination and decommissioning (D&D) of Site buildings. Extensive environmental data were collected in 1996 to evaluate appropriate remedial actions for the Site.

  7. Conceptual Site Treatment Plan Laboratory for Energy-Related Health Research Environmental Restoration Project

    SciTech Connect (OSTI)

    Chapman, T.E.

    1993-10-01

    The Federal Facilities Compliance Act (the Act) of 1992 waives sovereign immunity for federal facilities for fines and penalties under the provisions of the Resource Recovery and Conservation Act, state, interstate, and local hazardous and solid waste management requirements. However, for three years the Act delays the waiver for violations involving US Department of Energy (DOE) facilities. The Act, however, requires that the DOE prepare a Conceptual Site Treatment Plan (CSTP) for each of its sites that generate or store mixed wastes (MWs). The purpose of the CSTP is to present DOE`s preliminary evaluations of the development of treatment capacities and technologies for treating a site`s MW. This CSTP presents the preliminary capacity and technology evaluation for the Laboratory for Energy-Related Health Research (LEHR). The five identified MW streams at LEHR are evaluated to the extent possible given available information. Only one MW stream is sufficiently well defined to permit a technology evaluation to be performed. Two other MW streams are in the process of being characterized so that an evaluation can be performed. The other two MW streams will be generated by the decommissioning of inactive facilities onsite within the next five years.

  8. Energy-Related Carbon Dioxide Emissions at the State Level, 2000-2013

    U.S. Energy Information Administration (EIA) (indexed site)

    2 Table 9. Net electricity trade index and primary electricity source for states with least and most energy-related carbon dioxide emissions per capita (2000-2013) 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Primary 2011 2012 2013 Source Least CO2 per capita New York 0.9 1.0 0.9 0.9 0.9 0.9 1.0 1.0 1.0 0.9 0.9 1.0 1.0 1.0 Natural Gas Vermont 1.6 1.4 1.3 1.3 1.2 1.2 1.5 1.3 1.5 1.7 1.5 1.6 3.0 3.2 Nuclear California 0.8 0.7 0.7 0.7 0.7 0.7 0.8 0.7 0.7 0.7 0.7 0.7 0.7 0.7 Natural Gas

  9. Workshop on induced Seismicity due to fluid injection/production from Energy-Related Applications

    SciTech Connect (OSTI)

    Majer, E.L.; Asanuma, Hiroshi; Rueter, Horst; Stump, Brian; Segall, Paul; Zoback, Mark; Nelson, Jim; Frohlich, Cliff; Rutledge, Jim; Gritto, Roland; Baria, Roy; Hickman, Steve; McGarr, Art; Ellsworth, Bill; Lockner, Dave; Oppenheimer, David; Henning, Peter; Rosca, Anca; Hornby, Brian; Wang, Herb; Beeler, Nick; Ghassemi, Ahmad; Walters, Mark; Robertson-Tait, Ann; Dracos, Peter; Fehler, Mike; Abou-Sayed, Ahmed; Ake, Jon; Vorobiev, Oleg; Julian, Bruce

    2011-04-01

    that was necessary not only to make fluid injections safe, but an economic asset, DOE organized a series of workshops. The first workshop was held on February 4, 2010, at Stanford University. A second workshop will be held in mid-2010 to address the critical elements of a 'best practices/protocol' that industry could use as a guide to move forward with safe implementation of fluid injections/production for energy-related applications, i.e., a risk mitigation plan, and specific recommendations for industry to follow. The objectives of the first workshop were to identify critical technology and research needs/approaches to advance the understanding of induced seismicity associated with energy related fluid injection/production, such that: (1) The risk associated with induced seismicity can be reduced to a level that is acceptable to the public, policy makers, and regulators; and (2) Seismicity can be utilized/controlled to monitor, manage, and optimize the desired fluid behavior in a cost effective fashion. There were two primary goals during the workshop: (1) Identify the critical roadblocks preventing the necessary understanding of human-induced seismicity. These roadblocks could be technology related (better imaging of faults and fractures, more accurate fluid tracking, improved stress measurements, etc.), research related (fundamental understanding of rock physical properties and geochemical fluid/rock interactions, development of improved constitutive relations, improved understanding of rock failure, improved data processing and modeling, etc.), or a combination of both. (2) After laying out the roadblocks the second goal was to identify technology development and research needs that could be implemented in the near future to address the above objectives.

  10. Inventory of China's Energy-Related CO2 Emissions in 2008

    SciTech Connect (OSTI)

    Fridley, David; Zheng, Nina; Qin, Yining

    2011-03-31

    Although China became the world's largest emitter of energy-related CO{sub 2} emissions in 2007, China does not publish annual estimates of CO{sub 2} emissions and most published estimates of China's emissions have been done by other international organizations. Undertaken at the request of the Energy Information Administration (EIA) of the US Department of Energy, this study examines the feasibility of applying the EIA emissions inventory methodology to estimate China's emissions from published Chinese data. Besides serving as a proof of concept, this study also helps develop a consistent and transparent method for estimating China's CO{sub 2} emissions using an Excel model and identified China-specific data issues and areas for improvement. This study takes a core set of data from the energy balances published in the China Energy Statistical Yearbook 2009 and China Petrochemical Corporation Yearbook 2009 and applies the EIA's eight-step methodology to estimate China's 2008 CO{sub 2} emissions. First, China's primary and secondary fuel types and consumption by end use are determined with slight discrepancies identified between the two data sources and inconsistencies in product categorization with the EIA. Second, energy consumption data are adjusted to eliminate double counting in the four potential areas identified by EIA; consumption data from China's Special Administrative Regions are not included. Physical fuel units are then converted to energy equivalents using China's standard energy measure of coal equivalent (1 kilogram = 29.27 MJ) and IPCC carbon emissions coefficients are used to calculate each fuel's carbon content. Next, carbon sequestration is estimated following EIA conventions for other petroleum products and non-energy use of secondary fuels. Emissions from international bunker fuels are also subtracted under the 'reference' calculation of estimating apparent energy consumption by fuel type and the 'sectoral' calculation of summing emissions

  11. Digital Surveying Directional Surveying Specialists | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying...

  12. Monument Survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Photographs from the WIPP Permanent Marker Monument Survey John Hart & Associates, 2000 Photograph of the Gnome Marker located about 10 miles SW of the WIPP site For more...

  13. Survey Consumption

    Annual Energy Outlook

    purchase diaries from a subset of respondents composing a Household Transportation Panel and is reported separately. Residential Energy Consumption Survey: Consumption and...

  14. radiological. survey

    National Nuclear Security Administration (NNSA)

    7%2A en NNSA to Conduct Aerial Radiological Surveys Over San Francisco, Pacifica, Berkeley, And Oakland, CA Areas http:nnsa.energy.govmediaroompressreleasesamsca

  15. Manual for ERLE (Energy-Related Laboratory Equipment). Instructions and information for institutions of higher learning concerning used energy-related laboratory equipment grants; Manual para ERLE [Equipo de Laboratorio Relacionado con la Energia]. Instrucciones e informacion para instituciones de educacion superior sobre subvenciones de equipo de laboratorio usado relacionado con la energia

    SciTech Connect (OSTI)

    Not Available

    1994-10-01

    This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

  16. [Energy related studies utilizing K-feldspar thermochronology]. Progress report, 1991--1992

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    In our second year of current funding cycle, we have investigated the Ar diffusion properties and microstructures of K-feldspars and the application of domain theory to natural K-feldspars. We completed a combined TEM and argon diffusion study of the effect of laboratory heat treatment on the microstructure and kinetic properties of K-feldspar. We conclude in companion papers that, with one minor exception, no observable change in the diffusion behavior occurs during laboratory extraction procedures until significant fusion occurs at about 1100{degrees}C. The effect that is observed involves a correlation between the homogenization of cryptoperthite lamelle and the apparent increase in retentivity of about 5% of the argon in the K-feldspar under study. We can explain this effect of both as an artifact of the experiment or the loss of a diffusion boundary. Experiments are being considered to resolve this question. Refinements have been made to our experimental protocol that appears that greatly enhance the retrieval of multi-activation energies from K-feldspars. We have applied the multi-domain model to a variety of natural environments (Valles Caldera, Red River fault, Appalachian basin) with some surprising results. Detailed {sup 40}Ar/{sup 39} Ar coverage of the Red River shear zone, thought to be responsible for the accommodation of a significant fraction of the Indo-Asian convergence, strongly suggests that our technique can precisely date both the termination of ductile strike-slip motion and the initiation of normal faulting. Work has continued on improving our numerical codes for calculating thermal histories and the development of computer based graphing tools has significantly increased our productivity.

  17. [Energy related studies utilizing microline thermochronology]. Progress report, 1990--1991

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    In our first year of the current funding cycle, we have investigated three interrelated aspects of K-feldspar thermochronology; (1) the Ar diffusion properties and microstructures of K-feldspars, (2) the thermal evolution of the Valles Caldera and (3) the continued development of microanalysis. Results of TEM and light microscopy on heated and unheated samples of MH-10 K-feldspar reveal three classes of substructure are present: (1) cross hatched extinction is common and there is almost no albite/pericline twinning, only tweed microstructure; (2) 5--10 vol. % of this K-feldspar are turbid zones with complex twin and tweed structures at the sub-micron scale and numerous dislocation and strain features; (3) about 20% of the K-feldspar is comprised of 0.01 {times} 0.2-1{mu}m albite exsolution lamellae. The network of fractured/turbid zones divides the sample into blocks of approximately 50 {mu}m and the separation between albite exsolution lamellae produce K-feldspar domains of the order 0.1 {mu}m. Independent crushing and diffusion experiments suggest the scale of the largest domain is order ten`s of micron whereas the smallest domain size is inferred to be {approximately}0.1 {mu}m. Many, and perhaps most, alkali feldspars contain diffusion domains with activation energies that may vary by as much as 8 kcal/mol. An extraordinary consequence of even relatively small variations in activation energy between domains is that the shape of an age spectrum can change dramatically by varying the laboratory heating schedule. We have performed {sup 40}Ar/{sup 39}Ar age spectrum experiments on K-feldspar separated from Proterozoic quartz monzonite taken from a depth of 1.76 km down the VC-2B drill hole, Valles Caldera, north-central New Mexcio.

  18. A survey of numerical methods for shock physics applications

    SciTech Connect (OSTI)

    Hertel, E.S. Jr.

    1997-10-01

    Hydrocodes or more accurately, shock physics analysis packages, have been widely used in the US Department of Energy (DOE) laboratories and elsewhere around the world for over 30 years. Initial applications included weapons effects studies where the pressure levels were high enough to disregard the material strength, hence the term hydrocode. Over the last 30 years, Sandia has worked extensively to develop and apply advanced hydrocodes to armor/anti-armor interactions, warhead design, high explosive initiation, and nuclear weapon safety issues. The needs of the DOE have changed over the last 30 years, especially over the last decade. A much stronger emphasis is currently placed on the details of material deformation and high explosive initiation phenomena. The hydrocodes of 30 years ago have now evolved into sophisticated analysis tools that can replace testing in some situations and complement it in all situations. A brief history of the development of hydrocodes in the US will be given. The author also discusses and compares the four principal methods in use today for the solution of the conservation equations of mass, momentum, and energy for shock physics applications. The techniques discussed are the Eulerian methods currently employed by the Sandia multi-dimensional shock physics analysis package known as CTH; the element based Lagrangian method currently used by codes like DYNA; the element free Lagrangian method (also known as smooth particle hydrodynamics) used by codes like the Los Alamos code SPHINX; and the Arbitrary Lagrangian Eulerian methods used by codes like the Lawrence Livermore code CALE or the Sandia code ALEGRA.

  19. Instruction and information on used energy-related laboratory equipment grants for educational institutions of higher learning

    SciTech Connect (OSTI)

    Not Available

    1980-02-01

    The USDOE, in accordance with its responsibility to encourage research and development in the energy area, awards grants of used energy-related laboratory equipment to universities and colleges and other nonprofit educational institutions of higher learning in the US for use in energy-oriented educational programs in the life, physical, and environmental sciences and engineering. This booklet gives information on eligibility and procedure, typical equipment, and institutional costs, along with a proposal guide and terms and conditions of a grant. Appendixes give addresses as to where to review equipment lists and where to mail proposals for used equipment grants. (RWR)

  20. ERLE Guidelines: Instruction and information on used energy-related laboratory equipment grants for educational institutions of higher learning

    SciTech Connect (OSTI)

    Not Available

    1991-06-01

    The United States Department of Energy (DOE), in accordance with its responsibility to encourage research and development in the energy area, awards grants of used energy-related laboratory equipment to universities and colleges and other non-profit educational institutions of higher learning in the United States for use in energy-oriented educational programs in the life, physical and environmental sciences, and engineering. Applications for the grant of available equipment in this program should be submitted by an eligible non-profit educational institution to the DOE Field Office responsible for the site where the specific equipment is known to be located.

  1. Instruction and information on used energy-related laboratory equipment grants for educational institutions of higher learning. Revision

    SciTech Connect (OSTI)

    Not Available

    1985-08-01

    The United States Department of Energy (DOE), in accordance with its responsibility to encourage research and development in the energy area, awards grants of used energy-related laboratory equipment to universities and colleges and other non-profit educational institutions of higher learning in the United States for use in energy-oriented educational programs in the life, physical and environmental sciences and engineering. Proposals for the grant of available equipment in this program should be submitted by an eligible non-profit educational institution to the DOE Field Office responsible for the site where the specific equipment is known to be located.

  2. Ground-water characterization field activities for 1995--1996 Laboratory for Energy-Related Health Research, University of California, Davis

    SciTech Connect (OSTI)

    Liikala, T.L.; Lanigan, D.C.; Last, G.V.

    1996-05-01

    This report documents ground-water characterization field activities completed from August to December 1995 and in January 1996 at the Laboratory for Energy-Related Health Research (LEHR) in Davis, California. The ground water at LEHR is one of several operable units under investigation by Pacific Northwest National Laboratory for the US Department of Energy. The purpose of this work was to further characterize the hydrogeology beneath the LEHR site, with the primary focus on ground water. The objectives were to estimate hydraulic properties for the two uppermost saturated hydrogeologic units (i.e., HSU-1 and HSU-2), and to determine distributions of contaminants of concern in these units. Activities undertaken to accomplish these objectives include well installation, geophysical logging, well development, ground-water sampling, slug testing, Westbay ground-water monitoring system installation, continuous water-level monitoring, Hydropunch installation, and surveying. Ground-water samples were collected from 61 Hydropunch locations. Analytical results from these locations and the wells indicate high chloroform concentrations trending from west/southwest to east/northeast in the lower portion of HSU-1 and in the upper and middle portions of HSU-2. The chloroform appears to originate near Landfill 2. Tritium was not found above the MCL in any of the well or Hydropunch samples. Hexavalent chromium was found at four locations with concentrations above the MCL in HSU-1 and at one location in HSU-2. One well in HSU-1 had a total chromium concentration above the MCL. Nitrate-nitrogen above the MCL was found at several Hydropunch locations in both HSU-1 and HSU-2.

  3. Department of Energy Issues Call for Proposals to U.S. Universities for Nuclear Energy-Related Integrated Research Project Proposals

    Energy.gov [DOE]

    The U.S. Department of Energy’s Nuclear Energy University Programs is now accepting applications from universities interested in conducting nuclear energy-related Integrated Research Projects.

  4. Department of Energy Issues Call for Proposals to U.S. Universities for Nuclear Energy-Related Integrated Research Project Proposals

    Energy.gov [DOE]

    The U.S. Department of Energys Nuclear Energy University Programs is now accepting applications from universities interested in conducting nuclear energy-related Integrated Research Projects.

  5. Recent advances in two-phase flow numerics

    SciTech Connect (OSTI)

    Mahaffy, J.H.; Macian, R.

    1997-07-01

    The authors review three topics in the broad field of numerical methods that may be of interest to individuals modeling two-phase flow in nuclear power plants. The first topic is iterative solution of linear equations created during the solution of finite volume equations. The second is numerical tracking of macroscopic liquid interfaces. The final area surveyed is the use of higher spatial difference techniques.

  6. Energy Information Administration - Transportation Energy Consumption...

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Consumption Transportation Energy Consumption Surveys energy used by vehicles EIA conducts numerous energy-related surveys and other information programs. In general, the...

  7. Confidence in Numerical Simulations

    SciTech Connect (OSTI)

    Hemez, Francois M.

    2015-02-23

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  8. Rythmos Numerical Integration Package

    Energy Science and Technology Software Center (OSTI)

    2006-09-01

    Rythmos numerically integrates transient differential equations. The differential equations can be explicit or implicit ordinary differential equations ofr formulated as fully implicit differential-algebraic equations. Methods include backward Euler, forward Euler, explicit Runge-Kutta, and implicit BDF at this time. Native support for operator split methods and strict modularity are strong design goals. Forward sensitivity computations will be included in the first release with adjoint sensitivities coming in the near future. Rythmos heavily relies on Thyra formore » linear algebra and nonlinear solver interfaces to AztecOO, Amesos, IFPack, and NOX in Tilinos. Rythmos is specially suited for stiff differential equations and thos applictions where operator split methods have a big advantage, e.g. Computational fluid dynamics, convection-diffusion equations, etc.« less

  9. Cost of presumptive source term Remedial Actions Laboratory for energy-related health research, University of California, Davis

    SciTech Connect (OSTI)

    Last, G.V.; Bagaasen, L.M.; Josephson, G.B.; Lanigan, D.C.; Liikala, T.L.; Newcomer, D.R.; Pearson, A.W.; Teel, S.S.

    1995-12-01

    A Remedial Investigation/Feasibility Study (RI/FS) is in progress at the Laboratory for Energy Related Health Research (LEHR) at the University of California, Davis. The purpose of the RI/FS is to gather sufficient information to support an informed risk management decision regarding the most appropriate remedial actions for impacted areas of the facility. In an effort to expedite remediation of the LEHR facility, the remedial project managers requested a more detailed evaluation of a selected set of remedial actions. In particular, they requested information on both characterization and remedial action costs. The US Department of Energy -- Oakland Office requested the assistance of the Pacific Northwest National Laboratory to prepare order-of-magnitude cost estimates for presumptive remedial actions being considered for the five source term operable units. The cost estimates presented in this report include characterization costs, capital costs, and annual operation and maintenance (O&M) costs. These cost estimates are intended to aid planning and direction of future environmental remediation efforts.

  10. Historical emissions of black and organic carbon aerosol from energy-related combustion, 1850-2000 - article no. GB2018

    SciTech Connect (OSTI)

    Bond, T.C.; Bhardwaj, E.; Dong, R.; Jogani, R.; Jung, S.K.; Roden, C.; Streets, D.G.; Trautmann, N.M.

    2007-05-15

    We present an emission inventory of primary black carbon (BC) and primary organic carbon (OC) aerosols from fossil fuel and biofuel combustion between 1850 and 2000. We reconstruct fossil fuel consumption and represent changes in technology on a national and sectoral basis. Our estimates rely on new estimates of biofuel consumption, and updated emission factors for old technologies. Emissions of black carbon increase almost linearly, totaling about 1000 Gg in 1850, 2200 Gg in 1900, 3000 Gg in 1950, and 4400 Gg in 2000. Primary organic carbon shows a similar pattern, with emissions of 4100 Gg, 5800 Gg, 6700 Gg, and 8700 Gg in 1850, 1900, 1950, and 2000, respectively. Biofuel is responsible for over half of BC emission until about 1890, and dominates energy-related primary OC emission throughout the entire period. Coal contributes the greatest fraction of BC emission between 1880 and 1975, and is overtaken by emissions from biofuel around 1975, and by diesel engines around 1990. Previous work suggests a rapid rise in BC emissions between 1950 and 2000. This work supports a more gradual increase between 1950 and 2000, similar to the increase between 1850 and 1925; implementation of clean technology is a primary reason.

  11. 2012 NERSC User Survey Text

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2012 User Survey Text 2010/2011 User Survey Results 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries

  12. Long-Term Surveillance and Maintenance Plan for the Former Laboratory for Energy-Related Health Research Federal Facility University of California, Davis

    Office of Legacy Management (LM)

    for the Former Laboratory for Energy-Related Health Research Federal Facility University of California, Davis September 2016 LMS/LEH/S07300-5.0 This page intentionally left blank U.S. Department of Energy LEHR Long-Term Surveillance and Maintenance Plan September 2016 Doc. No. S07300-5.0 Page i Contents Abbreviations ................................................................................................................................. iii 1.0 Introduction

  13. Energy-related inventions program. A joint program of the Department of Energy and the National Institute of Standards and Technology. Status report for recommendations 251 through 523

    SciTech Connect (OSTI)

    Not Available

    1991-03-01

    The Energy-Related Inventions Program was established in 1975. Since its inception over 27,000 inventions have been evaluated. As of the printing of the report, 523 have been recommended to the Department of Energy. The report supercedes NISTIR 4313 and summarizes the status of Inventions 251 through 523. A companion report (NISTIR 4533) summarizes recommended inventions 1 through 250.

  14. Energy-related inventions program: A joint program of the Department of Energy and the National Institute of Standards and Technology. Status report for recommendations 1 through 250

    SciTech Connect (OSTI)

    Not Available

    1991-03-01

    A brief description of the Energy-Related Inventions Program and all inventions recommended by the National Institute of Standards and Technology to the Department of Energy since the inception of the program, including a brief summary of the current status of each.

  15. Studies of the Atmospheric Chemsitry of Energy-Related Volatile Organic Compounds and of their Atmospheric Reaction Products

    SciTech Connect (OSTI)

    Roger Atkinson; Janet Arey

    2007-04-14

    The focus of this contract was to investigate selected aspects of the atmospheric chemistry of volatile organic compounds (VOCs) emitted into the atmosphere from energy-related sources as well as from biogenic sources. The classes of VOCs studied were polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs, the biogenic VOCs isoprene, 2-methyl-3-buten-2-ol and cis-3-hexen-1-ol, alkenes (including alkenes emitted from vegetation) and their oxygenated atmospheric reaction products, and a series of oxygenated carbonyl and hydroxycarbonyl compounds formed as atmospheric reaction products of aromatic hydrocarbons and other VOCs. Large volume reaction chambers were used to investigate the kinetics and/or products of photolysis and of the gas-phase reactions of these organic compounds with hydroxyl (OH) radicals, nitrate (NO3) radicals, and ozone (O3), using an array of analytical instrumentation to analyze the reactants and products (including gas chromatography, in situ Fourier transform infrared spectroscopy, and direct air sampling atmospheric pressure ionization tandem mass spectrometry). The following studies were carried out. The photolysis rates of 1- and 2-nitronaphthalene and of eleven isomeric methylnitronaphthalenes were measured indoors using blacklamp irradiation and outdoors using natural sunlight. Rate constants were measured for the gas-phase reactions of OH radicals, Cl atoms and NO3 radicals with naphthalene, 1- and 2-methylnaphthalene, 1- and 2-ethylnaphthalene and the ten dimethylnaphthalene isomers. Rate constants were measured for the gas-phase reactions of OH radicals with four unsaturated carbonyls and with a series of hydroxyaldehydes formed as atmospheric reaction products of other VOCs, and for the gas-phase reactions of O3 with a series of cycloalkenes. Products of the gas-phase reactions of OH radicals and O3 with a series of biogenically emitted VOCs were identified and quantified. Ambient atmospheric measurements of the concentrations of a

  16. Robotic Surveying

    SciTech Connect (OSTI)

    Suzy Cantor-McKinney; Michael Kruzic

    2007-03-01

    -actuated functions to be controlled by an onboard computer. The computer-controlled Speedrower was developed at Carnegie Mellon University to automate agricultural harvesting. Harvesting tasks require the vehicle to cover a field using minimally overlapping rows at slow speeds in a similar manner to geophysical data acquisition. The Speedrower had demonstrated its ability to perform as it had already logged hundreds of acres of autonomous harvesting. This project is the first use of autonomous robotic technology on a large-scale for geophysical surveying.

  17. The effects of ionophores and metabolic inhibitors on methanogenesis and energy-related properties of Methanobacterium bryantii

    SciTech Connect (OSTI)

    Jarrell, K.F.; Sprott, G.D.

    1983-08-01

    The effects of numerous ionophores and inhibitors were tested on methane synthesis, intracellular ATP and potassium concentrations, and the proton motive force of the methanogenic archaebacterium Methanobacterium bryantii. M. bryantii had an internal pH near 6.8 (and hence little delta pH during growth) with an electrical potential of --127 mV in growth medium and --105 mV in a pH 6.5 buffer. The study has identified agents which, in M. bryantii, can effectively cause a decline of intracellular ATP (gramicidin, acetylene) and potassium concentrations (gramicidin, nigericin), inhibit methane synthesis (acetylene, gramicidin, nigericin, triphenylmethylphosphonium bromide), eliminate the electrical potential (high extracellular potassium ion concentrations), and dissipate artificially imposed, inside alkaline, pH gradients (monensin, nigericin, carbonyl cyanide m-chlorophenylhydrazone). Carbonyl cyanide m-chlorophenylhydrazone was generally ineffective in media or buffers reduced with cysteine-sulfide but could be effective in cysteine-free solutions reduced with hydrogen sulfide.

  18. STEP Participant Survey Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    STEP Participant Survey Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  19. Numerical

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... saturation mechanism depends sensitively on the viscosity parameterized by Pm. ... A more thorough treatment of the dynamic variation of dominant eigenmodes can be found for ...

  20. NEPA Litigation Surveys

    Energy.gov [DOE]

    CEQ publishes surveys on NEPA litigation on an annual basis. These surveys identify the number of cases involving a NEPA based cause of action, Federal agencies that were identified as a lead...

  1. 2002 Manufacturing Energy Consumption Survey - User Needs Survey

    U.S. Energy Information Administration (EIA) (indexed site)

    2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next Energy Consumption Survey (MECS) As our valued...

  2. Stephanie von Numers | Department of Energy

    Energy.gov (indexed) [DOE]

    Stephanie von Numers - Communications and Web Coordinator, Education & Workforce Development Stephanie von Numers joined the U.S. Department of Energy's Office of Energy Efficiency ...

  3. Environmental Survey preliminary report

    SciTech Connect (OSTI)

    Not Available

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  4. 2014 NERSC User Survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    User Survey 2014 NERSC User Survey December 17, 2014 by Francesca Verdier Please take a few minutes to fill out NERSC's annual user survey. Your feedback is important because it allows us to judge the quality of our services, give DOE information on how we are doing, and point us to areas in which we can improve. The survey is on the web at the URL: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2014/ and covers the allocation year 2014. Subscribe via RSS Subscribe

  5. Disruptive Innovation in Numerical Hydrodynamics

    SciTech Connect (OSTI)

    Waltz, Jacob I.

    2012-09-06

    We propose the research and development of a high-fidelity hydrodynamic algorithm for tetrahedral meshes that will lead to a disruptive innovation in the numerical modeling of Laboratory problems. Our proposed innovation has the potential to reduce turnaround time by orders of magnitude relative to Advanced Simulation and Computing (ASC) codes; reduce simulation setup costs by millions of dollars per year; and effectively leverage Graphics Processing Unit (GPU) and future Exascale computing hardware. If successful, this work will lead to a dramatic leap forward in the Laboratory's quest for a predictive simulation capability.

  6. behavioral-survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Evacuation Behavior Survey for No-Notice Emergency Scenarios" Presentation at the 93rd TRB Annual Meeting at the Traveler Behavior and Values Committee (ADB10) - Behavioral Process subcommittee; January 13, 2014 Joshua Auld, Vadim Sokolov, Rene Bautista, Angela Fontes Transportation Research and Analysis Computing Center Argonne National Laboratory Biography The presentation details a survey on evacuation response behavior that was conducted as a part of the RTSTEP project. The survey was

  7. Community Leaders Survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Community Leaders Survey Community Leaders Survey This survey is a tracking study commissioned by the Lab that helps measure perceived progress in maintaining community relationships and listening and responding to the needs of Northern New Mexico communities. Results help shape and direct the Lab's contributions to the region's future. Latest results show nine-in-ten of the community leaders express satisfaction with LANL's economic impact on the region. Study measures changes in leaders'

  8. Wellbore inertial directional surveying system

    DOE Patents [OSTI]

    Andreas, Ronald D.; Heck, G. Michael; Kohler, Stewart M.; Watts, Alfred C.

    1991-01-01

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single off-shore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on the electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block aboutthe gimbal axis. Angular rates of the sensor block about axes which are perpendicular to the gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and anular rate information. Kalman estimation techniques are used to compensate for system errors.

  9. Wellbore inertial directional surveying system

    DOE Patents [OSTI]

    Andreas, R.D.; Heck, G.M.; Kohler, S.M.; Watts, A.C.

    1982-09-08

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single offshore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on an electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block about the gimbal axis. Angular rates of the sensor block about axes which are perpendicular to te gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and angular rate information. Kalman estimation techniques are used to compensate for system errors. 25 figures.

  10. Homeowner and Contractor Surveys

    Energy.gov [DOE]

    Better Buildings Neighborhood Program Data and Evaluation Peer Exchange Call: Homeowner and Contractor Surveys, Call Slides and Discussion Summary, January 19, 2012.

  11. ORISE: Characterization surveys

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental...

  12. 2004 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    13 | Next 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  13. 2006 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  14. 2005 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    10 | Next 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software...

  15. 2003 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    10 | Next 2003 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction Topics and Changes from...

  16. 2011 NERSC User Survey (Read Only)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2010/2011 User Survey Results Survey Text 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries facebook icon

  17. The variable sky of deep synoptic surveys

    SciTech Connect (OSTI)

    Ridgway, Stephen T.; Matheson, Thomas; Mighell, Kenneth J.; Olsen, Knut A. [National Optical Astronomy Observatory, Tucson, AZ 85725 (United States); Howell, Steve B., E-mail: ridgway@noao.edu [NASA Ames Research Center, P.O. Box 1, M/S 244-30, Moffett Field, CA 94035 (United States)

    2014-11-20

    The discovery of variable and transient sources is an essential product of synoptic surveys. The alert stream will require filtering for personalized criteriaa process managed by a functionality commonly described as a Broker. In order to understand quantitatively the magnitude of the alert generation and Broker tasks, we have undertaken an analysis of the most numerous types of variable targets in the skyGalactic stars, quasi-stellar objects (QSOs), active galactic nuclei (AGNs), and asteroids. It is found that the Large Synoptic Survey Telescope (LSST) will be capable of discovering ?10{sup 5} high latitude (|b| > 20) variable stars per night at the beginning of the survey. (The corresponding number for |b| < 20 is orders of magnitude larger, but subject to caveats concerning extinction and crowding.) However, the number of new discoveries may well drop below 100 per night within less than one year. The same analysis applied to GAIA clarifies the complementarity of the GAIA and LSST surveys. Discovery of AGNs and QSOs are each predicted to begin at ?3000 per night and decrease by 50 times over four years. Supernovae are expected at ?1100 per night, and after several survey years will dominate the new variable discovery rate. LSST asteroid discoveries will start at >10{sup 5} per night, and if orbital determination has a 50% success rate per epoch, they will drop below 1000 per night within two years.

  18. Numerical computation of Pop plot

    SciTech Connect (OSTI)

    Menikoff, Ralph

    2015-03-23

    The Pop plot — distance-of-run to detonation versus initial shock pressure — is a key characterization of shock initiation in a heterogeneous explosive. Reactive burn models for high explosives (HE) must reproduce the experimental Pop plot to have any chance of accurately predicting shock initiation phenomena. This report describes a methodology for automating the computation of a Pop plot for a specific explosive with a given HE model. Illustrative examples of the computation are shown for PBX 9502 with three burn models (SURF, WSD and Forest Fire) utilizing the xRage code, which is the Eulerian ASC hydrocode at LANL. Comparison of the numerical and experimental Pop plot can be the basis for a validation test or as an aid in calibrating the burn rate of an HE model. Issues with calibration are discussed.

  19. Interagency mechanical operations group numerical systems group

    SciTech Connect (OSTI)

    1997-09-01

    This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.

  20. Dark Energy Survey

    SciTech Connect (OSTI)

    Roodman, Aaron; Nord, Brian; Elliot, Ann

    2012-12-06

    Members of the Dark Energy Survey collaboration explain what they hope to learn by studying the southern sky with the world's most advanced digital camera, mounted on a telescope in Chile.

  1. 2000 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    "NERSC has been the most stable supercomputer center in the country particularly with the migration from the T3E to the IBM SP". "Makes supercomputing easy." Below are the survey...

  2. REMS Webinar Survey

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Safety and Security Thank you for participating in the inaugural DOE REMS Webinar that was held on Tuesday, March 8 at 1:00 pm EST. Please take a moment to respond to this survey. ...

  3. Dark Energy Survey

    ScienceCinema (OSTI)

    Roodman, Aaron; Nord, Brian; Elliot, Ann

    2014-08-12

    Members of the Dark Energy Survey collaboration explain what they hope to learn by studying the southern sky with the world's most advanced digital camera, mounted on a telescope in Chile.

  4. Benchmarking survey for recycling.

    SciTech Connect (OSTI)

    Marley, Margie Charlotte; Mizner, Jack Harry

    2005-06-01

    This report describes the methodology, analysis and conclusions of a comparison survey of recycling programs at ten Department of Energy sites including Sandia National Laboratories/New Mexico (SNL/NM). The goal of the survey was to compare SNL/NM's recycling performance with that of other federal facilities, and to identify activities and programs that could be implemented at SNL/NM to improve recycling performance.

  5. 2010 Federal Employee Viewpoint Survey

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Federal Employee Viewpoint Survey Page 1 of 20 ...Department of Energy 2010 Federal Employee Viewpoint Survey: Trend Report (2006 and 2008 ...

  6. Numerical Investigation of Laser Propulsion for Transport in Water Environment

    SciTech Connect (OSTI)

    Han Bing; Li Beibei; Zhang Hongchao; Chen Jun; Shen Zhonghua; Lu Jian; Ni Xiaowu

    2010-10-08

    Problems that cumber the development of the laser propulsion in atmosphere and vacuum are discussed. Based on the theory of interaction between high-intensity laser and materials, as air and water, it is proved that transport in water environment can be impulsed by laser. The process of laser propulsion in water is investigated theoretically and numerically. It shows that not only the laser induced plasma shock wave, but also the laser induced bubble oscillation shock waves and the pressure induced by the collapsing bubble can be used. Many experimental results show that the theory and the numerical results are valid. The numerical result of the contribution of every propulsion source is given in percentage. And the maximum momentum coupling coefficient Cm is given. Laser propulsion in water environment can be applied in many fields. For example, it can provide highly controllable forces of the order of micro-Newton ({mu}N) in microsystems, such as the MEMS (Micro-electromechanical Systems). It can be used as minimally invasive surgery tools of high temporal and spatial resolution. It can be used as the propulsion source in marine survey and exploitation.

  7. NEPA Litigation Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    NEPA Litigation Surveys NEPA Litigation Surveys CEQ publishes surveys on NEPA litigation on an annual basis. These surveys identify the number of cases involving a NEPA based cause...

  8. Numerical evaluation of effective unsaturated hydraulic properties...

    Office of Scientific and Technical Information (OSTI)

    unsaturated hydraulic properties for fractured rocks Citation Details In-Document Search Title: Numerical evaluation of effective unsaturated hydraulic properties for ...

  9. numerical modeling | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Submitted by Ocop(5) Member 15 July, 2014 - 07:07 MHK LCOE Reporting Guidance Draft Cost Current DOE LCOE numerical modeling Performance Tidal Wave To normalize competing...

  10. Los Alamos National Laboratory communicators capture numerous...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Society for Technical Communication Awards Los Alamos National Laboratory communicators capture numerous awards from Society for Technical Communication Three Los Alamos entries ...

  11. Methods for Bayesian power spectrum inference with galaxy surveys

    SciTech Connect (OSTI)

    Jasche, Jens; Wandelt, Benjamin D.

    2013-12-10

    We derive and implement a full Bayesian large scale structure inference method aiming at precision recovery of the cosmological power spectrum from galaxy redshift surveys. Our approach improves upon previous Bayesian methods by performing a joint inference of the three-dimensional density field, the cosmological power spectrum, luminosity dependent galaxy biases, and corresponding normalizations. We account for all joint and correlated uncertainties between all inferred quantities. Classes of galaxies with different biases are treated as separate subsamples. This method therefore also allows the combined analysis of more than one galaxy survey. In particular, it solves the problem of inferring the power spectrum from galaxy surveys with non-trivial survey geometries by exploring the joint posterior distribution with efficient implementations of multiple block Markov chain and Hybrid Monte Carlo methods. Our Markov sampler achieves high statistical efficiency in low signal-to-noise regimes by using a deterministic reversible jump algorithm. This approach reduces the correlation length of the sampler by several orders of magnitude, turning the otherwise numerically unfeasible problem of joint parameter exploration into a numerically manageable task. We test our method on an artificial mock galaxy survey, emulating characteristic features of the Sloan Digital Sky Survey data release 7, such as its survey geometry and luminosity-dependent biases. These tests demonstrate the numerical feasibility of our large scale Bayesian inference frame work when the parameter space has millions of dimensions. This method reveals and correctly treats the anti-correlation between bias amplitudes and power spectrum, which are not taken into account in current approaches to power spectrum estimation, a 20% effect across large ranges in k space. In addition, this method results in constrained realizations of density fields obtained without assuming the power spectrum or bias parameters

  12. STEP Participant Survey Executive Summary

    Energy.gov [DOE]

    STEP Participant Survey Executive Summary, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  13. 2001 FEMP customer survey appendices

    SciTech Connect (OSTI)

    Hall, Nicholas P.; Reed, John H.; Talerico, Thomas P.; Riggert, Jeff; Oh, Andrew; Jordan, Gretchen

    2002-02-01

    Appendix A: Survey Instrument; Appendix B: Detailed Responses; Appendix C: Adoption and Diffusion of Innovations

  14. Solar Site Survey Toolkit

    Energy.gov [DOE]

    After a couple outings, a principal technologist at Sandia National Laboratories saw a need for a travel kit that would have the necessary tools to make the task of site surveys more manageable and safer. They have had great success using the kit in the field already.

  15. MONTHLY RADIATION SURVEY TECHNICAL BASIS

    SciTech Connect (OSTI)

    BROWN, R.L.

    2003-06-13

    This document details the technical basis, analysis, and justification for rescheduling radiation surveys in occupied radiation areas within Tank Farm Facilities from a weekly to a monthly frequency. The purpose of this document is to provide the technical basis, analysis, and justification for seeking a technical equivalency determination (TED) to TFRCM Article 552.1.b. The scope of this document limited to radiation surveys in occupied areas, no equivalency is being sought for high radiation area boundary surveys, radiological buffer area surveys, active ventilations surveys, or work coverage surveys.

  16. ARM User Survey Report

    SciTech Connect (OSTI)

    Roeder, LR

    2010-06-22

    The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users’ preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

  17. Sloan digital sky survey

    SciTech Connect (OSTI)

    Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G.; Lupton, R.

    1994-04-01

    The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

  18. Direct Numerical Simulation of Compressible, Turbulent Flow ...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The computational mesh for this direct numerical simulation was over 33 billion cells, and was run on up to 102,400 cores under a DoD HPCMP Frontier Project. Nicholas Bisek and ...

  19. Design Code Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan ...

  20. Homeowner and Contractor Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homeowner and Contractor Surveys Homeowner and Contractor Surveys Better Buildings Neighborhood Program Data and Evaluation Peer Exchange Call: Homeowner and Contractor Surveys, ...

  1. Chinese Geological Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Chinese Geological Survey Jump to: navigation, search Name: Chinese Geological Survey Place: China Sector: Geothermal energy Product: Chinese body which is involved in surveys of...

  2. Steam System Survey Guide

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1/263 Steam System Survey Guide Greg Harrell, Ph.D., P.E. DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via the U.S. Department of Energy (DOE) Information Bridge. Web site http://www.osti.gov/bridge Reports produced before January 1, 1996, may be purchased by members of the public from the following source. National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone 703-605-6000 (1-800-553-6847) TDD 703-487-4639 Fax

  3. Boundary acquisition for setup of numerical simulation

    SciTech Connect (OSTI)

    Diegert, C.

    1997-12-31

    The author presents a work flow diagram that includes a path that begins with taking experimental measurements, and ends with obtaining insight from results produced by numerical simulation. Two examples illustrate this path: (1) Three-dimensional imaging measurement at micron scale, using X-ray tomography, provides information on the boundaries of irregularly-shaped alumina oxide particles held in an epoxy matrix. A subsequent numerical simulation predicts the electrical field concentrations that would occur in the observed particle configurations. (2) Three-dimensional imaging measurement at meter scale, again using X-ray tomography, provides information on the boundaries fossilized bone fragments in a Parasaurolophus crest recently discovered in New Mexico. A subsequent numerical simulation predicts acoustic response of the elaborate internal structure of nasal passageways defined by the fossil record. The author must both add value, and must change the format of the three-dimensional imaging measurements before the define the geometric boundary initial conditions for the automatic mesh generation, and subsequent numerical simulation. The author applies a variety of filters and statistical classification algorithms to estimate the extents of the structures relevant to the subsequent numerical simulation, and capture these extents as faceted geometries. The author will describe the particular combination of manual and automatic methods used in the above two examples.

  4. Mechanical diode: Comparing numerical and experimental characterizations

    SciTech Connect (OSTI)

    Sagartz, M.J.; Segalman, D.; Simmermacher, T.

    1998-02-01

    In this introductory work, joint compliance is studied in both a numerical and experimental setting. A simple bolted interface is used as the test article and compliance is measured for the joint in both compression and in tension. This simple interface is shown to exhibit a strong non-linearity near the transition from compression to tension (or vice-versa). Modeling issues pertaining to numerically solving for the compliance are addressed. It is shown that the model predictions, in spite of convergence being very sensitive to numerical artifacts of the interface model, are in good agreement with experimentally measured strains and joint compliances. The joint behavior is a mechanical analogy to a diode, i.e., in compression, the joint is very stiff, acting almost as a rigid link, while in tension the joint is relatively soft, acting as a spring.

  5. Numerical simulations of strong incompressible magnetohydrodynamic turbulence

    SciTech Connect (OSTI)

    Mason, J.; Cattaneo, F.; Perez, J. C.; Boldyrev, S.

    2012-05-15

    Magnetised plasma turbulence pervades the universe and is likely to play an important role in a variety of astrophysical settings. Magnetohydrodynamics (MHD) provides the simplest theoretical framework in which phenomenological models for the turbulent dynamics can be built. Numerical simulations of MHD turbulence are widely used to guide and test the theoretical predictions; however, simulating MHD turbulence and accurately measuring its scaling properties is far from straightforward. Computational power limits the calculations to moderate Reynolds numbers and often simplifying assumptions are made in order that a wider range of scales can be accessed. After describing the theoretical predictions and the numerical approaches that are often employed in studying strong incompressible MHD turbulence, we present the findings of a series of high-resolution direct numerical simulations. We discuss the effects that insufficiencies in the computational approach can have on the solution and its physical interpretation.

  6. User-needs study for the 1993 residential energy consumption survey

    SciTech Connect (OSTI)

    Not Available

    1993-09-24

    During 1992, the Energy Information Administration (EIA) conducted a user-needs study for the 1993 Residential Energy Consumption Survey (RECS). Every 3 years, the RECS collects information on energy consumption and expenditures for various classes of households and residential buildings. The RECS is the only source of such information within EIA, and one of only a few sources of such information anywhere. EIA sent letters to more than 750 persons, received responses from 56, and held 15 meetings with users. Written responses were also solicited by notices published in the April 14, 1992 Federal Register and in several energy-related publications. To ensure that the 1993 RECS meets current information needs, EIA made a specific effort to get input from policy makers and persons needing data for forecasting efforts. These particular needs relate mainly to development of the National Energy Modeling System and new energy legislation being considered at the time of the user needs survey.

  7. Numerical likelihood analysis of cosmic ray anisotropies

    SciTech Connect (OSTI)

    Carlos Hojvat et al.

    2003-07-02

    A numerical likelihood approach to the determination of cosmic ray anisotropies is presented which offers many advantages over other approaches. It allows a wide range of statistically meaningful hypotheses to be compared even when full sky coverage is unavailable, can be readily extended in order to include measurement errors, and makes maximum unbiased use of all available information.

  8. Numerical prediction of window condensation potential

    SciTech Connect (OSTI)

    McGowan, A.G.

    1995-08-01

    Although a substantial amount of effort has been expended to develop numerical methods for determining windows U-factors (EE 1983; Goss and Curcija 1994; Standaert 1985; CSA 1993a; NFRC 1991), there has been little work to data on using numerical methods to predict condensation potential. It is perhaps of direct interest to most ASHRAE members to determine heat loss and solar gains through windows as a precursor to sizing heating and cooling equipment, but condensation has long been recognized as an extremely important issue for consumers (and, consequently, for window manufacturers). Moreover, building scientists recognize the link between condensation and increased energy consumption (due to latent loads), reduced occupant comfort and indoor air quality (from the presence of bacteria and mold), and structural damage (where accumulated condensation is absorbed by the building material, thus reducing their structural stability). The National Fenestration Rating Council (NFRC) is developing a rating method for condensation potential in fenestration products as part of its mandate from the US Department of Energy (DOE). A rating method would benefit from the use of simulation as a supplement to physical condensation resistance testing to reduce the cost and time required for implementation and increase the flexibility of the rating method. This paper outlines one of the necessary components in the application of numerical methods for evaluating condensation in fenestration products. The theoretical approach and its practical application are discussed, as well as some comparisons between numerical prediction and physical test results for a sample of products.

  9. The Sloan Digital Sky Survey-II Supernova Survey: Technical Summary

    SciTech Connect (OSTI)

    Frieman, Joshua A.; Bassett, Bruce; Becker, Andrew; Choi, Changsu; Cinabro, David; DeJongh, Don Frederic; Depoy, Darren L.; Doi, Mamoru; Garnavich, Peter M.; Hogan, Craig J.; Holtzman, Jon; Im, Myungshin; Jha, Saurabh; Konishi, Kohki; Lampeitl, Hubert; Marriner, John; Marshall, Jennifer L.; McGinnis, David; Miknaitis, Gajus; Nichol, Robert C.; Prieto, Jose Luis; /Ohio State U. /Rochester Inst. Tech. /Stanford U., Phys. Dept. /Pennsylvania U. /Penn State U., Astron. Astrophys. /Portsmouth U. /Tokyo U. /Tokyo U. /South African Astron. Observ. /Tokyo U. /Stanford U., Phys. Dept. /Fermilab /Fermilab /Ohio State U. /Stanford U., Phys. Dept. /Fermilab /Bristol U. /Apache Point Observ. /Liverpool John Moores U., ARI /Columbia U., CBA /Apache Point Observ. /Ohio State U. /Durham U. /Portsmouth U. /South African Astron. Observ. /Naval Academy, Annapolis /UC, Berkeley /UC, Berkeley /Ohio State U. /Stockholm U. /New Mexico State U. /Princeton U. Observ. /Tokyo U. /Washington U., Seattle, Astron. Dept. /Stanford U., Phys. Dept. /Jefferson Lab /Apache Point Observ. /Gottingen U. /Chicago U. /San Francisco State U. /DARK Cosmology Ctr. /Fermilab /Apache Point Observ. /Durham U. /Princeton U. Observ. /Apache Point Observ. /Apache Point Observ. /Apache Point Observ. /Barcelona U. /Stockholm U. /Apache Point Observ. /Lick Observ. /Sussex U. /Barcelona U. /Apache Point Observ. /Ohio State U. /Apache Point Observ. /Fermilab /DARK Cosmology Ctr. /Chicago U. /Fermilab /South African Astron. Observ. /Ohio State U. /Apache Point Observ. /Texas U., McDonald Observ. /Fermilab

    2007-09-14

    The Sloan Digital Sky Survey-II (SDSS-II) has embarked on a multi-year project to identify and measure light curves for intermediate-redshift (0.05 < z < 0.35) Type Ia supernovae (SNe Ia) using repeated five-band (ugriz) imaging over an area of 300 sq. deg. The survey region is a stripe 2.5 degrees wide centered on the celestial equator in the Southern Galactic Cap that has been imaged numerous times in earlier years, enabling construction of a deep reference image for discovery of new objects. Supernova imaging observations are being acquired between 1 September and 30 November of 2005-7. During the first two seasons, each region was imaged on average every five nights. Spectroscopic follow-up observations to determine supernova type and redshift are carried out on a large number of telescopes. In its first two three-month seasons, the survey has discovered and measured light curves for 327 spectroscopically confirmed SNe Ia, 30 probable SNe Ia, 14 confirmed SNe Ib/c, 32 confirmed SNe II, plus a large number of photometrically identified SNe Ia, 94 of which have host-galaxy spectra taken so far. This paper provides an overview of the project and briefly describes the observations completed during the first two seasons of operation.

  10. Stress-dependent permeability of fractured rock masses: A numerical...

    Office of Scientific and Technical Information (OSTI)

    permeability of fractured rock masses: A numerical study Citation Details In-Document Search Title: Stress-dependent permeability of fractured rock masses: A numerical study We ...

  11. Toward portable programming of numerical linear algebra on manycore...

    Office of Scientific and Technical Information (OSTI)

    Toward portable programming of numerical linear algebra on manycore nodes. Citation Details In-Document Search Title: Toward portable programming of numerical linear algebra on ...

  12. Numerical Modeling Studies of The Dissolution-Diffusion-Convection...

    Office of Scientific and Technical Information (OSTI)

    Numerical Modeling Studies of The Dissolution-Diffusion-Convection ProcessDuring CO2 Storage in Saline Aquifers Citation Details In-Document Search Title: Numerical Modeling ...

  13. Numerical Verification of Bounce Harmonic Resonances in Neoclassical

    Office of Scientific and Technical Information (OSTI)

    for Tokamaks Kimin Kim, Jong-Kyu Park and Allen H. Boozer 70 PLASMA PHYSICS AND FUSION TECHNOLOGY Tokamaks, Numerical Verification Tokamaks, Numerical Verification This...

  14. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Citation Details In-Document Search Title: Numerical simulations for ...

  15. Error Estimation for Fault Tolerance in Numerical Integration...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Error Estimation for Fault Tolerance in Numerical Integration Solvers Event Sponsor: ... In numerical integration solvers, approximation error can be estimated at a low cost. We ...

  16. Development of Numerical Simulation Capabilities for In Situ...

    Office of Scientific and Technical Information (OSTI)

    Development of Numerical Simulation Capabilities for In Situ Heating of Oil Shale Citation Details In-Document Search Title: Development of Numerical Simulation Capabilities for In ...

  17. Numerical modeling of water injection into vapor-dominatedgeothermal...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Numerical modeling of water injection into vapor-dominatedgeothermal reservoirs Citation Details In-Document Search Title: Numerical modeling of water injection ...

  18. Numerical Modeling At Dixie Valley Geothermal Area (McKenna ...

    Open Energy Information (Open El) [EERE & EIA]

    Numerical Modeling At Dixie Valley Geothermal Area (McKenna & Blackwell, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Numerical Modeling...

  19. Sandia Energy - Numerical Simulations of Hydrokinetics in the...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Numerical Simulations of Hydrokinetics in the Roza Canal, Yakima Washington Home Renewable Energy Energy Water Power Computational Modeling & Simulation Numerical Simulations of...

  20. 2014 ALCF User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Science and Technical Support This section of the survey addresses the effectiveness of ALCF support at problem resolution, including emails sent to support@alcf.anl.gov, phone ...

  1. Reflection Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    (Gritto, Et Al.) Rye Patch Area Integrated Seismic Studies At The Rye Patch Geothermal Reservoir, Nevada Reflection Survey At Rye Patch Area (Laney, 2005) Rye Patch Area Federal...

  2. IRT Surveys | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    consulting in building thermographers and thermal imaging allowing to detect energy loss and increase of energy efficiency. References: IRT Surveys1 This article is a stub....

  3. PRELIMINARY SURVEY OF VITRO CORPORATION

    Office of Legacy Management (LM)

    status of those facilities utilized under Atomic Energy Commission (AEC) contract during ... A survey of the site was conducted, consisting of gamma-ray exposure rate measurements ...

  4. THE CATALINA SURVEYS PERIODIC VARIABLE STAR CATALOG

    SciTech Connect (OSTI)

    Drake, A. J.; Graham, M. J.; Djorgovski, S. G.; Mahabal, A. A.; Donalek, C.; Williams, R.; Catelan, M.; Torrealba, G.; García-Álvarez, D.; Prieto, J. L.; Beshore, E.; Larson, S.; Christen sen, E.; Boattini, A.; Gibbs, A.; Hill, R.; Kowalski, R.; Johnson, J.; Belokurov, V.; Koposov, S. E.; and others

    2014-07-01

    We present ∼47,000 periodic variables found during the analysis of 5.4 million variable star candidates within a 20,000 deg{sup 2} region covered by the Catalina Surveys Data Release-1 (CSDR1). Combining these variables with type ab RR Lyrae from our previous work, we produce an online catalog containing periods, amplitudes, and classifications for ∼61,000 periodic variables. By cross-matching these variables with those from prior surveys, we find that >90% of the ∼8000 known periodic variables in the survey region are recovered. For these sources, we find excellent agreement between our catalog and prior values of luminosity, period, and amplitude as well as classification. We investigate the rate of confusion between objects classified as contact binaries and type c RR Lyrae (RRc's) based on periods, colors, amplitudes, metallicities, radial velocities, and surface gravities. We find that no more than a few percent of the variables in these classes are misidentified. By deriving distances for this clean sample of ∼5500 RRc's, we trace the path of the Sagittarius tidal streams within the Galactic halo. Selecting 146 outer-halo RRc's with SDSS radial velocities, we confirm the presence of a coherent halo structure that is inconsistent with current N-body simulations of the Sagittarius tidal stream. We also find numerous long-period variables that are very likely associated within the Sagittarius tidal stream system. Based on the examination of 31,000 contact binary light curves we find evidence for two subgroups exhibiting irregular light curves. One subgroup presents significant variations in mean brightness that are likely due to chromospheric activity. The other subgroup shows stable modulations over more than a thousand days and thereby provides evidence that the O'Connell effect is not due to stellar spots.

  5. Geophex Airborne Unmanned Survey System

    SciTech Connect (OSTI)

    Won, I.J.; Keiswetter, D.

    1995-10-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide {open_quotes}stand-off{close_quotes} capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits rapid geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected.

  6. Numerical recipes for mold filling simulation

    SciTech Connect (OSTI)

    Kothe, D.; Juric, D.; Lam, K.; Lally, B.

    1998-07-01

    Has the ability to simulate the filling of a mold progressed to a point where an appropriate numerical recipe achieves the desired results? If results are defined to be topological robustness, computational efficiency, quantitative accuracy, and predictability, all within a computational domain that faithfully represents complex three-dimensional foundry molds, then the answer unfortunately remains no. Significant interfacial flow algorithm developments have occurred over the last decade, however, that could bring this answer closer to maybe. These developments have been both evolutionary and revolutionary, will continue to transpire for the near future. Might they become useful numerical recipes for mold filling simulations? Quite possibly. Recent progress in algorithms for interface kinematics and dynamics, linear solution methods, computer science issues such as parallelization and object-oriented programming, high resolution Navier-Stokes (NS) solution methods, and unstructured mesh techniques, must all be pursued as possible paths toward higher fidelity mold filling simulations. A detailed exposition of these algorithmic developments is beyond the scope of this paper, hence the authors choose to focus here exclusively on algorithms for interface kinematics. These interface tracking algorithms are designed to model the movement of interfaces relative to a reference frame such as a fixed mesh. Current interface tracking algorithm choices are numerous, so is any one best suited for mold filling simulation? Although a clear winner is not (yet) apparent, pros and cons are given in the following brief, critical review. Highlighted are those outstanding interface tracking algorithm issues the authors feel can hamper the reliable modeling of today`s foundry mold filling processes.

  7. Advanced Numerical Model for Irradiated Concrete

    SciTech Connect (OSTI)

    Giorla, Alain B.

    2015-03-01

    In this report, we establish a numerical model for concrete exposed to irradiation to address these three critical points. The model accounts for creep in the cement paste and its coupling with damage, temperature and relative humidity. The shift in failure mode with the loading rate is also properly represented. The numerical model for creep has been validated and calibrated against different experiments in the literature [Wittmann, 1970, Le Roy, 1995]. Results from a simplified model are shown to showcase the ability of numerical homogenization to simulate irradiation effects in concrete. In future works, the complete model will be applied to the analysis of the irradiation experiments of Elleuch et al. [1972] and Kelly et al. [1969]. This requires a careful examination of the experimental environmental conditions as in both cases certain critical information are missing, including the relative humidity history. A sensitivity analysis will be conducted to provide lower and upper bounds of the concrete expansion under irradiation, and check if the scatter in the simulated results matches the one found in experiments. The numerical and experimental results will be compared in terms of expansion and loss of mechanical stiffness and strength. Both effects should be captured accordingly by the model to validate it. Once the model has been validated on these two experiments, it can be applied to simulate concrete from nuclear power plants. To do so, the materials used in these concrete must be as well characterized as possible. The main parameters required are the mechanical properties of each constituent in the concrete (aggregates, cement paste), namely the elastic modulus, the creep properties, the tensile and compressive strength, the thermal expansion coefficient, and the drying shrinkage. These can be either measured experimentally, estimated from the initial composition in the case of cement paste, or back-calculated from mechanical tests on concrete. If some

  8. 2005 Residential Energy Consumption Survey

    U.S. Energy Information Administration (EIA) (indexed site)

    Completed forms are due by March 4, 2006. If you have any questions, please call (toll-free) 1-NNN-NNN-NNNN. Ask for the Supplier Survey Specialist. This report is mandatory under ...

  9. 2005 Residential Energy Consumption Survey

    U.S. Energy Information Administration (EIA) (indexed site)

    Completed forms are due by March 4, 2006. If you have any questions, please call (toll-free) 1-NNN-NNN-NNNN. Ask for the Supplier Survey Specialist.. This report is mandatory under ...

  10. 2014 Manufacturing Energy Consumption Survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    U S C E N S U S B U R E A U 2014 Manufacturing Energy Consumption Survey Sponsored by the Energy Information Administration U.S. Department of Energy Administered and Compiled by ...

  11. Geodetic Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    At Kilauea Summit Area (Keller, Et Al., 1979) Kilauea Summit Area Results Of An Experimental Drill Hole At The Summit Of Kilauea Volcano, Hawaii Geodetic Survey At Long Valley...

  12. 2014 LMR Survey2.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2014. The goal of the survey is to assess the overall perceived effectiveness of LMR programs and to find potential target areas for improvement. The survey is comprised of 19 questions. Of these, 12 are subjective with the multiple choice answers: Strongly Agree, Agree, Neutral, Disagree, and Strongly Disagree. 3 questions ask for descriptive answers, such as giving the frequency of LMR meetings during a specific time frame. The final 4 questions are open-ended. With the exception of the

  13. Numerical uncertainty in computational engineering and physics

    SciTech Connect (OSTI)

    Hemez, Francois M

    2009-01-01

    Obtaining a solution that approximates ordinary or partial differential equations on a computational mesh or grid does not necessarily mean that the solution is accurate or even 'correct'. Unfortunately assessing the quality of discrete solutions by questioning the role played by spatial and temporal discretizations generally comes as a distant third to test-analysis comparison and model calibration. This publication is contributed to raise awareness of the fact that discrete solutions introduce numerical uncertainty. This uncertainty may, in some cases, overwhelm in complexity and magnitude other sources of uncertainty that include experimental variability, parametric uncertainty and modeling assumptions. The concepts of consistency, convergence and truncation error are overviewed to explain the articulation between the exact solution of continuous equations, the solution of modified equations and discrete solutions computed by a code. The current state-of-the-practice of code and solution verification activities is discussed. An example in the discipline of hydro-dynamics illustrates the significant effect that meshing can have on the quality of code predictions. A simple method is proposed to derive bounds of solution uncertainty in cases where the exact solution of the continuous equations, or its modified equations, is unknown. It is argued that numerical uncertainty originating from mesh discretization should always be quantified and accounted for in the overall uncertainty 'budget' that supports decision-making for applications in computational physics and engineering.

  14. RELAP-7 Numerical Stabilization: Entropy Viscosity Method

    SciTech Connect (OSTI)

    R. A. Berry; M. O. Delchini; J. Ragusa

    2014-06-01

    The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory (INL). The code is based on the INL's modern scientific software development framework, MOOSE (Multi-Physics Object Oriented Simulation Environment). The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical integration methods, and physical models. The end result will be a reactor systems analysis capability that retains and improves upon RELAP5's capability and extends the analysis capability for all reactor system simulation scenarios. RELAP-7 utilizes a single phase and a novel seven-equation two-phase flow models as described in the RELAP-7 Theory Manual (INL/EXT-14-31366). The basic equation systems are hyperbolic, which generally require some type of stabilization (or artificial viscosity) to capture nonlinear discontinuities and to suppress advection-caused oscillations. This report documents one of the available options for this stabilization in RELAP-7 -- a new and novel approach known as the entropy viscosity method. Because the code is an ongoing development effort in which the physical sub models, numerics, and coding are evolving, so too must the specific details of the entropy viscosity stabilization method. Here the fundamentals of the method in their current state are presented.

  15. Geophex Airborne Unmanned Survey System

    SciTech Connect (OSTI)

    Won, I.L.; Keiswetter, D.

    1995-12-31

    Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results.

  16. Sample Employee Survey for Workplace Charging Planning

    Energy.gov (indexed) [DOE]

    WORKPLACE CHARGING CHALLENGE Sample Employee Survey for Workplace Charging Planning ... Your responses to this survey will be used to determine employee interest in this benefit. ...

  17. Idaho Geological Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    The Idaho Geological Survey is located in Boise, Idaho. About Information on past oil and gas exploration wells in Idaho was transferred to the Idaho Geological Survey in...

  18. Category:Telluric Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Pages in category "Telluric Survey" This category contains only the following page. T Telluric Survey Retrieved from "http:en.openei.orgwindex.php?titleCategory:Telluric...

  19. FAQs for Survey Forms 804 and 814

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    intended for cracking into olefins. EIA-804 Survey form & instructions Contact: Robert Merriam, (202) 586-4615 EIA-814 Survey form & instructions Contact: Chris Buckner, (202)...

  20. radiological. survey | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    survey NNSA to Conduct Aerial Radiological Surveys Over San Francisco, Pacifica, Berkeley, And Oakland, CA Areas A U.S. Department of Energy National Nuclear Security...

  1. 2008/2009 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Next 20082009 User Survey Results Table of Contents Response Survey Respondent Demographics Overall Satisfaction and Importance All Satisfaction and Importance Ratings...

  2. Aftertreatment Research Prioritization: A CLEERS Industrial Survey...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research Prioritization: A CLEERS Industrial Survey Aftertreatment Research Prioritization: A CLEERS Industrial Survey Presentation given at the 2007 Diesel Engine-Efficiency & ...

  3. Federal Buildings Supplemental Survey--Public Use Files

    U.S. Energy Information Administration (EIA) (indexed site)

    how Federal buildings use energy. OFEMP requested that the FBSS provide building-level energy-related characteristics for a special sample of commercial buildings owned by the...

  4. Commercial Buildings Energy Consumption Survey 2003 - Detailed Tables

    Reports and Publications

    2008-01-01

    The tables contain information about energy consumption and expenditures in U.S. commercial buildings and information about energy-related characteristics of these buildings.

  5. BASE PROGRAM ON ENERGY RELATED RESEARCH

    SciTech Connect (OSTI)

    Unknown

    1998-08-01

    The Base Research Program at Western Research Institute (WRI) is planned to develop technologies to a level that will attract industrial sponsors for continued development under the Jointly Sponsored Research (JSR) Program. In many instances, a potential JSR cosponsor has been identified but additional laboratory or bench-scale data are necessary to assess the utility of the technology prior to cosponsor investment. Both peer and management review are employed prior to proposing Base projects to the U.S. Department of Energy (DOE).

  6. Glossary: Energy-Related Carbon Emissions

    Gasoline and Diesel Fuel Update

    (HFCs), perfluorocarbons (PFCs), and sulfur hexafluoride, that are transparent to solar (short-wave) radiation but opaque to long-wave radiation, thus preventing long-wave...

  7. Base Program on Energy Related Research

    SciTech Connect (OSTI)

    Western Research Institute

    2008-06-30

    The main objective of the Base Research Program was to conduct both fundamental and applied research that will assist industry in developing, deploying, and commercializing efficient, nonpolluting fossil energy technologies that can compete effectively in meeting the energy requirements of the Nation. In that regard, tasks proposed under the WRI research areas were aligned with DOE objectives of secure and reliable energy; clean power generation; development of hydrogen resources; energy efficiency and development of innovative fuels from low and no-cost sources. The goal of the Base Research Program was to develop innovative technology solutions that will: (1) Increase the production of United States energy resources--coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. This report summarizes the accomplishments of the overall Base Program. This document represents a stand-alone Final Report for the entire Program. It should be noted that an interim report describing the Program achievements was prepared in 2003 covering the progress made under various tasks completed during the first five years of this Program.

  8. High numerical aperture multilayer Laue lenses

    SciTech Connect (OSTI)

    Morgan, Andrew J.; Prasciolu, Mauro; Andrejczuk, Andrzej; Krzywinski, Jacek; Meents, Alke; Pennicard, David; Graafsma, Heinz; Barty, Anton; Bean, Richard J.; Barthelmess, Miriam; Oberthuer, Dominik; Yefanov, Oleksandr; Aquila, Andrew; Chapman, Henry N.; Bajt, Saša

    2015-06-01

    The ever-increasing brightness of synchrotron radiation sources demands improved X-ray optics to utilise their capability for imaging and probing biological cells, nanodevices, and functional matter on the nanometer scale with chemical sensitivity. Here we demonstrate focusing a hard X-ray beam to an 8 nm focus using a volume zone plate (also referred to as a wedged multilayer Laue lens). This lens was constructed using a new deposition technique that enabled the independent control of the angle and thickness of diffracting layers to microradian and nanometer precision, respectively. This ensured that the Bragg condition is satisfied at each point along the lens, leading to a high numerical aperture that is limited only by its extent. We developed a phase-shifting interferometric method based on ptychography to characterise the lens focus. The precision of the fabrication and characterisation demonstrated here provides the path to efficient X-ray optics for imaging at 1 nm resolution.

  9. Numerical Studies of Impurities in Fusion Plasmas

    DOE R&D Accomplishments [OSTI]

    Hulse, R. A.

    1982-09-01

    The coupled partial differential equations used to describe the behavior of impurity ions in magnetically confined controlled fusion plasmas require numerical solution for cases of practical interest. Computer codes developed for impurity modeling at the Princeton Plasma Physics Laboratory are used as examples of the types of codes employed for this purpose. These codes solve for the impurity ionization state densities and associated radiation rates using atomic physics appropriate for these low-density, high-temperature plasmas. The simpler codes solve local equations in zero spatial dimensions while more complex cases require codes which explicitly include transport of the impurity ions simultaneously with the atomic processes of ionization and recombination. Typical applications are discussed and computational results are presented for selected cases of interest.

  10. NUMERICAL MODELING OF CATHODE CONTACT MATERIAL DENSIFICATION

    SciTech Connect (OSTI)

    Koeppel, Brian J.; Liu, Wenning N.; Stephens, Elizabeth V.; Khaleel, Mohammad A.

    2011-11-01

    Numerical modeling was used to simulate the constrained sintering process of the cathode contact layer during assembly of solid oxide fuel cells (SOFCs). A finite element model based on the continuum theory for sintering of porous bodies was developed and used to investigate candidate low-temperature cathode contact materials. Constitutive parameters for various contact materials under investigation were estimated from dilatometry screening tests, and the influence of processing time, processing temperature, initial grain size, and applied compressive stress on the free sintering response was predicted for selected candidate materials. The densification behavior and generated stresses within a 5-cell planar SOFC stack during sintering, high temperature operation, and room temperature shutdown were predicted. Insufficient constrained densification was observed in the stack at the proposed heat treatment, but beneficial effects of reduced grain size, compressive stack preload, and reduced thermal expansion coefficient on the contact layer densification and stresses were observed.

  11. New numeric data packages from CDIAC

    SciTech Connect (OSTI)

    Hahn, C.J.; Warren, S.G.; London, J.

    1995-12-31

    This article describes 6 numerical data packages related to climate and greenhouse gas concentrations: Edited synoptic cloud reports from ships and land stations (1982-1991); Carbon dioxide concentrations in surface water and the atmosphere (1986-1989); Carbon-13 isotopic abundance and concentration of atmospheric methane for background air (1978-1989); Six and Three hourly meteorological observations from 223 USSR stations; Global, regional and national annual CO2 emission estimates from fossil-fuel burning, hydraulic-cement production, and gas flaring (1950-1992); continental-scale estimates of biotic carbon flux from land-cover change (1850-1980); Carbon dioxide, hydrographic and chemical data in the south Atlantic Ocean (February-March 1991).

  12. Very high numerical aperture light transmitting device

    DOE Patents [OSTI]

    Allison, Stephen W.; Boatner, Lynn A.; Sales, Brian C.

    1998-01-01

    A new light-transmitting device using a SCIN glass core and a novel calcium sodium cladding has been developed. The very high index of refraction, radiation hardness, similar solubility for rare earths and similar melt and viscosity characteristics of core and cladding materials makes them attractive for several applications such as high-numerical-aperture optical fibers and specialty lenses. Optical fibers up to 60 m in length have been drawn, and several simple lenses have been designed, ground, and polished. Preliminary results on the ability to directly cast optical components of lead-indium phosphate glass are also discussed as well as the suitability of these glasses as a host medium for rare-earth ion lasers and amplifiers.

  13. An Updated Numerical Model Of The Larderello-Travale Geothermal...

    Open Energy Information (Open El) [EERE & EIA]

    Numerical Model Of The Larderello-Travale Geothermal System, Italy Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: An Updated Numerical Model Of...

  14. Direct numerical simulation of turbulent reacting flows

    SciTech Connect (OSTI)

    Chen, J.H.

    1993-12-01

    The development of turbulent combustion models that reflect some of the most important characteristics of turbulent reacting flows requires knowledge about the behavior of key quantities in well defined combustion regimes. In turbulent flames, the coupling between the turbulence and the chemistry is so strong in certain regimes that is is very difficult to isolate the role played by one individual phenomenon. Direct numerical simulation (DNS) is an extremely useful tool to study in detail the turbulence-chemistry interactions in certain well defined regimes. Globally, non-premixed flames are controlled by two limiting cases: the fast chemistry limit, where the turbulent fluctuations. In between these two limits, finite-rate chemical effects are important and the turbulence interacts strongly with the chemical processes. This regime is important because industrial burners operate in regimes in which, locally the flame undergoes extinction, or is at least in some nonequilibrium condition. Furthermore, these nonequilibrium conditions strongly influence the production of pollutants. To quantify the finite-rate chemistry effect, direct numerical simulations are performed to study the interaction between an initially laminar non-premixed flame and a three-dimensional field of homogeneous isotropic decaying turbulence. Emphasis is placed on the dynamics of extinction and on transient effects on the fine scale mixing process. Differential molecular diffusion among species is also examined with this approach, both for nonreacting and reacting situations. To address the problem of large-scale mixing and to examine the effects of mean shear, efforts are underway to perform large eddy simulations of round three-dimensional jets.

  15. Numerical simulation of Rayleigh-Taylor instabilities involving solids

    SciTech Connect (OSTI)

    Chang, Chong H.

    2015-11-20

    This report is a description of research performed by LANL regarding numeric simulations of Rayleigh-Taylor instability.

  16. Numerical Modeling Of Basin And Range Geothermal Systems | Open...

    Open Energy Information (Open El) [EERE & EIA]

    for extensional geothermal systems that include structure, heat input, and permeability distribution have been established using numerical models. Extensional geothermal...

  17. REMS Webinar Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    REMS Webinar Survey REMS Webinar Survey Survey for the inaugural DOE REMS Webinar that was held on Tuesday, March 8, 2016 at 1:00 pm EST. REMS Webinar Survey (606.08 KB) More Documents & Publications Radiation Exposure Monitoring Systems Data Submittal Notification EERE's Usability and Analysis Techniques Guidebook Annual DOE Occupational Radiation Exposure | 2012 Report

  18. 2001 FEMP Customer Survey Report (Appendices)

    Energy.gov [DOE]

    Appendix A: Survey Instrument; Appendix B: Detailed Responses; Appendix C: Adoption and Diffusion of Innovations

  19. Correction of steel casing effect for density log using numerical and experimental methods in the slim borehole

    SciTech Connect (OSTI)

    Hwang, Seho; Shin, Jehyun; Kim, Jongman; Won, Byeongho

    2015-03-10

    Density log is widely applied for a variety of fields such as the petroleum exploration, mineral exploration, and geotechnical survey. The logging condition of density log is normally open holes but there are frequently cased boreholes. The primary calibration curve by slim hole logging manufacturer is normally the calibration curves for the variation of borehole diameter. In this study, we have performed the correction of steel casing effects using numerical and experimental methods. We have performed numerical modeling using the Monte Carlo N-Particle (MCNP) code based on Monte Carlo method, and field experimental method from open and cased hole log. In this study, we used the FDGS (Formation Density Gamma Sonde) for slim borehole with a 100 mCi 137Cs source, three inch borehole and steel casing. The casing effect between numerical and experimental method is well matched.

  20. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-09-15

    To establish Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of insite security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE 5634.1A. Canceled by DOE O 470.1 dated 9-28-95.

  1. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1988-02-03

    To establish the Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of on-site security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE O 5630.7 and DOE O 5634.1. Canceled by DOE 5634.1B.

  2. 2001 FEMP Customer Survey Appendices

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Appendices A Report Prepared for the US Department of Energy February 2002 By TecMRKT Works and Sandia National Laboratories TecMRKT Works Nicholas P. Hall John H. Reed Ph.D Thomas P. Talerico Jeff Riggert Andrew Oh And Sandia National Laboratories Gretchen Jordan FEMP Customer Survey Appendices Table of Contents Table of Contents TABLE OF CONTENTS I LIST OF FIGURES II LIST OF TABLES III APPENDIX A: SURVEY INSTRUMENT 1 APPENDIX B: DETAILED REPONSES 42 1. Participant and Nonparticipant Profiles

  3. AASG State Geological Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    AASG State Geological Survey AASG State Geological Survey presentation at the April 2013 peer review meeting held in Denver, Colorado.Contributions to the NGDSAASG State Geological Survey aasg__geo_survey_peer2013.pdf (2.44 MB) More Documents & Publications State Geological Survey Contributions to the National Geothermal Data System National Geothermal Data System Architecture Design, Testing and Maintenance National Geothermal Data Systems Data Acquisition and Access

  4. Federal Employee Viewpoint Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Policy and Guidance » Human Capital Management » Federal Employee Viewpoint Survey Federal Employee Viewpoint Survey The Federal Employee Viewpoint Survey (FedView survey) is a tool that measures employees' perceptions of whether, and to what extent, conditions characterizing successful organizations are present in their agencies. Survey results provide valuable insight into the challenges agency leaders face in ensuring the Federal Government has an effective civilian workforce and how well

  5. High numerical aperture multilayer Laue lenses

    DOE PAGES-Beta [OSTI]

    Morgan, Andrew J.; Prasciolu, Mauro; Andrejczuk, Andrzej; Krzywinski, Jacek; Meents, Alke; Pennicard, David; Graafsma, Heinz; Barty, Anton; Bean, Richard J.; Barthelmess, Miriam; et al

    2015-06-01

    The ever-increasing brightness of synchrotron radiation sources demands improved X-ray optics to utilise their capability for imaging and probing biological cells, nanodevices, and functional matter on the nanometer scale with chemical sensitivity. Here we demonstrate focusing a hard X-ray beam to an 8 nm focus using a volume zone plate (also referred to as a wedged multilayer Laue lens). This lens was constructed using a new deposition technique that enabled the independent control of the angle and thickness of diffracting layers to microradian and nanometer precision, respectively. This ensured that the Bragg condition is satisfied at each point along themore » lens, leading to a high numerical aperture that is limited only by its extent. We developed a phase-shifting interferometric method based on ptychography to characterise the lens focus. The precision of the fabrication and characterisation demonstrated here provides the path to efficient X-ray optics for imaging at 1 nm resolution.« less

  6. Numerical simulations of capillary barrier field tests

    SciTech Connect (OSTI)

    Morris, C.E.; Stormont, J.C.

    1997-12-31

    Numerical simulations of two capillary barrier systems tested in the field were conducted to determine if an unsaturated flow model could accurately represent the observed results. The field data was collected from two 7-m long, 1.2-m thick capillary barriers built on a 10% grade that were being tested to investigate their ability to laterally divert water downslope. One system had a homogeneous fine layer, while the fine soil of the second barrier was layered to increase its ability to laterally divert infiltrating moisture. The barriers were subjected first to constant infiltration while minimizing evaporative losses and then were exposed to ambient conditions. The continuous infiltration period of the field tests for the two barrier systems was modelled to determine the ability of an existing code to accurately represent capillary barrier behavior embodied in these two designs. Differences between the field test and the model data were found, but in general the simulations appeared to adequately reproduce the response of the test systems. Accounting for moisture retention hysteresis in the layered system will potentially lead to more accurate modelling results and is likely to be important when developing reasonable predictions of capillary barrier behavior.

  7. Numerical study of turbulent flame velocity

    SciTech Connect (OSTI)

    Akkerman, V'yacheslav; Bychkov, Vitaly; Eriksson, Lars-Erik

    2007-11-15

    A premixed flame propagating through a combination of vortices in a tube/channel is studied using direct numerical simulations of the complete set of combustion equations including thermal conduction, diffusion, viscosity, and chemical kinetics. Two cases are considered, a single-mode vortex array and a multimode combination of vortices obeying the Kolmogorov spectrum. It is shown that the velocity of flame propagation depends strongly on the vortex intensity and size. The dependence on the vortex intensity is almost linear in agreement with the general belief. The dependence on the vortex size may be imitated by a power law {proportional_to}D{sup 2/3}. This result is different from theoretical predictions, which creates a challenge for the theory. In the case of the Kolmogorov spectrum of vortices, the velocity of flame propagation is noticeably smaller than for a single-mode vortex array. The flame velocity depends weakly on the thermal expansion of burning matter within the domain of realistically large expansion factors. Comparison to the experimental data indicates that small-scale turbulence is not the only effect that influences the flame velocity in the experimental flows. Large-scale processes, such as the Darrieus-Landau instability and flame-wall interaction, contribute considerably to the velocity of flame propagation. Still, on small scales, the Darrieus-Landau instability becomes important only for a sufficiently low vortex intensity. (author)

  8. Supersymmetric Q-balls: A numerical study

    SciTech Connect (OSTI)

    Campanelli, L.; Ruggieri, M.

    2008-02-15

    We study numerically a class of nontopological solitons, the Q-balls, arising in a supersymmetric extension of the standard model with low-energy, gauge-mediated symmetry breaking. Taking into account the exact form of the supersymmetric potential giving rise to Q-balls, we find that there is a lower limit on the value of the charge Q in order to make them classically stable: Q > or approx. 5x10{sup 2}Q{sub cr}, where Q{sub cr} is constant depending on the parameters defining the potential and can be in the range 1 < or approx. Q{sub cr} < or approx. 10{sup 8} {sup divide} {sup 16}. If Q is the baryon number, stability with respect to the decay into protons requires Q > or approx. 10{sup 17}Q{sub cr}, while if the gravitino mass is greater then m{sub 3/2} > or approx. 61 MeV, no stable gauge-mediation supersymmetric Q-balls exist. Finally, we find that energy and radius of Q-balls can be parametrized as E{approx}{xi}{sub E}Q{sup 3/4} and R{approx}{xi}{sub R}Q{sup 1/4}, where {xi}{sub E} and {xi}{sub R} are slowly varying functions of the charge.

  9. Acoustic Doppler Current Profiler Surveys of Velocity Downstream of Albeni Falls Dam

    SciTech Connect (OSTI)

    Perkins, William A.; Titzler, P. Scott; Richmond, Marshall C.; Serkowski, John A.; Kallio, Sara E.; Bellgraph, Brian J.

    2010-09-30

    The U.S. Army Corps of Engineers (USACE), Seattle District, is studying the potential to locate fish bypass systems at Albeni Falls Dam. The USACE requested Pacific Northwest National Laboratory (PNNL) to survey velocity magnitude and direction in the dam tailrace. The empirical data collected will be used to support future numerical modeling, physical modeling, and evaluation of fish bypass system alternatives. In May 2010, PNNL conducted velocity surveys of the Albeni Falls Dam using a boat-mounted acoustic Doppler current profiler. The surveys were conducted over three days (May 25 through 27). During the survey period, total river discharge at the dam varied between 30.2 and 31.0 kcfs. A small amount of spill discharge, 2 kcfs, was present on two days (May 26 and 27). This report presents data plots showing measured velocity direction and magnitude averaged over the entire depth and over 5-ft depth increments from 5 to 30 ft.

  10. Hazards Survey and Hazards Assessments

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-08-21

    This volume is to assist DOE Operations/Field Offices and operating contractors in complying with the DOE O 151.1 requirement that Hazards Surveys and facility-specific Hazards Assessments be prepared, maintained, and used for emergency planning purposes. Canceled by DOE G 151.1-2.

  11. Precarious Rock Methodology for Seismic Hazard: Physical Testing, Numerical Modeling and Coherence Studies

    SciTech Connect (OSTI)

    Anooshehpoor, Rasool; Purvance, Matthew D.; Brune, James N.; Preston, Leiph A.; Anderson, John G.; Smith, Kenneth D.

    2006-09-29

    This report covers the following projects: Shake table tests of precarious rock methodology, field tests of precarious rocks at Yucca Mountain and comparison of the results with PSHA predictions, study of the coherence of the wave field in the ESF, and a limited survey of precarious rocks south of the proposed repository footprint. A series of shake table experiments have been carried out at the University of Nevada, Reno Large Scale Structures Laboratory. The bulk of the experiments involved scaling acceleration time histories (uniaxial forcing) from 0.1g to the point where the objects on the shake table overturned a specified number of times. The results of these experiments have been compared with numerical overturning predictions. Numerical predictions for toppling of large objects with simple contact conditions (e.g., I-beams with sharp basal edges) agree well with shake-table results. The numerical model slightly underpredicts the overturning of small rectangular blocks. It overpredicts the overturning PGA for asymmetric granite boulders with complex basal contact conditions. In general the results confirm the approximate predictions of previous studies. Field testing of several rocks at Yucca Mountain has approximately confirmed the preliminary results from previous studies, suggesting that he PSHA predictions are too high, possibly because the uncertainty in the mean of the attenuation relations. Study of the coherence of wavefields in the ESF has provided results which will be very important in design of the canisters distribution, in particular a preliminary estimate of the wavelengths at which the wavefields become incoherent. No evidence was found for extreme focusing by lens-like inhomogeneities. A limited survey for precarious rocks confirmed that they extend south of the repository, and one of these has been field tested.

  12. Transportation Energy Survey Data Book 1.1

    SciTech Connect (OSTI)

    Gurikova, T

    2002-06-18

    vehicles. There are three ways to achieve this goal: efficiency, substitution, or less travel. A reduction in oil usage will result in a reduction of carbon emissions. Successful transition to alternative types of fuel and advanced technology vehicles may depend on awareness of U.S. dependence on imported oil and the U.S. energy situation. Successful transition may also depend on knowledge of alternative types of fuels and advanced technologies. The ''Transportation Energy Survey Data Book 1.1'' examines the public's knowledge, beliefs and expectations of the energy situation in the United States and transportation energy-related issues. The data presented in the report have been drawn from multiple sources: surveys conducted by the Opinion Research Corporation International (ORCI) for National Renewable Energy Laboratory (NREL) that are commissioned and funded by OTT, Gallup polls, ABC News/Washington Post polls, NBC News/Wall Street Journal polls, polls conducted by the Ipsos-Reid Corporation, as well articles from The Washington Post (2001) and other sources. All surveys are telephone interviews conducted with randomly selected national samples of adults 18 years of age and older. Almost all surveys were conducted before the September 11, 2001 terrorist attacks, with the only exceptions being the November 2001 ORCI survey and the November 2001 survey conducted by the Ipsos-Reid Corporation.

  13. Exploring the Outer Solar System with the ESSENCE Supernova Survey

    SciTech Connect (OSTI)

    Becker, A.C.; Arraki, K.; Kaib, N.A.; Wood-Vasey, W.M.; Aguilera, C.; Blackman, J.W.; Blondin, S.; Challis, P.; Clocchiatti, A.; Covarrubias, R.; Damke, G.; Davis, T.M.; Filippenko, A.V.; Foley, R.J.; Garg, A.; Garnavich, P.M.; Hicken, M.; Jha, S.; Kirshner, R.P.; Krisciunas, K.; Leibundgut, B.; /Munich, Tech. U. /UC, Berkeley /NOAO, Tucson /Washington U., Seattle, Astron. Dept. /Fermilab /Harvard-Smithsonian Ctr. Astrophys. /Harvard U. /Chile U., Santiago /Ohio State U. /Cerro-Tololo InterAmerican Obs. /Harvard U. /Baltimore, Space Telescope Sci. /Johns Hopkins U. /Australian Natl. U., Canberra /Australian Natl. U., Canberra /Cerro-Tololo InterAmerican Obs. /Munich, Tech. U. /Harvard-Smithsonian Ctr. Astrophys. /Harvard U. /Cerro-Tololo InterAmerican Obs. /Texas A-M /Cerro-Tololo InterAmerican Obs.

    2011-11-10

    We report the discovery and orbital determination of 14 trans-Neptunian objects (TNOs) from the ESSENCE Supernova Survey difference imaging data set. Two additional objects discovered in a similar search of the SDSS-II Supernova Survey database were recovered in this effort. ESSENCE repeatedly observed fields far from the solar system ecliptic (-21{sup o} < {beta} < -5{sup o}), reaching limiting magnitudes per observation of I {approx} 23.1 and R {approx} 23.7. We examine several of the newly detected objects in detail, including 2003 UC{sub 414}, which orbits entirely between Uranus and Neptune and lies very close to a dynamical region that would make it stable for the lifetime of the solar system. 2003 SS{sub 422} and 2007 TA{sub 418} have high eccentricities and large perihelia, making them candidate members of an outer class of TNOs. We also report a new member of the 'extended' or 'detached' scattered disk, 2004 VN{sub 112}, and verify the stability of its orbit using numerical simulations. This object would have been visible to ESSENCE for only {approx}2% of its orbit, suggesting a vast number of similar objects across the sky. We emphasize that off-ecliptic surveys are optimal for uncovering the diversity of such objects, which in turn will constrain the history of gravitational influences that shaped our early solar system.

  14. BLINDLY DETECTING MERGING SUPERMASSIVE BLACK HOLES WITH RADIO SURVEYS

    SciTech Connect (OSTI)

    Kaplan, D. L.; O'Shaughnessy, R.; Sesana, A.; Volonteri, M. E-mail: oshaughn@gravity.phys.uwm.edu E-mail: martav@umich.edu

    2011-06-20

    Supermassive black holes (SMBHs) presumably grow through numerous mergers throughout cosmic time. During each merger, SMBH binaries are surrounded by a circumbinary accretion disk that imposes a significant ({approx}10{sup 4} G for a binary of 10{sup 8} M{sub sun}) magnetic field. The motion of the binary through that field will convert the field energy to Poynting flux, with a luminosity {approx}10{sup 43} erg s{sup -1} (B/10{sup 4} G){sup 2}(M/10{sup 8} M{sub sun}){sup 2}, some of which may emerge as synchrotron emission at frequencies near 1 GHz where current and planned wide-field radio surveys will operate. We find that the short timescales of many mergers will limit their detectability with most planned blind surveys to <1 per year over the whole sky, independent of the details of the emission process and flux distribution. Including an optimistic estimate for the radio flux makes detection even less likely, with <0.1 mergers per year over the whole sky. However, wide-field radio instruments may be able to localize systems identified in advance of merger by gravitational waves. Further, radio surveys may be able to detect the weaker emission produced by the binary's motion as it is modulated by spin-orbit precession and inspiral well in advance of merger.

  15. Self-similar radiation from numerical Rosenau-Hyman compactons

    SciTech Connect (OSTI)

    Rus, Francisco Villatoro, Francisco R.

    2007-11-10

    The numerical simulation of compactons, solitary waves with compact support, is characterized by the presence of spurious phenomena, as numerically induced radiation, which is illustrated here using four numerical methods applied to the Rosenau-Hyman K(p, p) equation. Both forward and backward radiations are emitted from the compacton presenting a self-similar shape which has been illustrated graphically by the proper scaling. A grid refinement study shows that the amplitude of the radiations decreases as the grid size does, confirming its numerical origin. The front velocity and the amplitude of both radiations have been studied as a function of both the compacton and the numerical parameters. The amplitude of the radiations decreases exponentially in time, being characterized by a nearly constant scaling exponent. An ansatz for both the backward and forward radiations corresponding to a self-similar function characterized by the scaling exponent is suggested by the present numerical results.

  16. Numerical Verification of Bounce Harmonic Resonances in Neoclassical

    Office of Scientific and Technical Information (OSTI)

    Toroidal Viscosity for Tokamaks (Technical Report) | SciTech Connect Numerical Verification of Bounce Harmonic Resonances in Neoclassical Toroidal Viscosity for Tokamaks Citation Details In-Document Search Title: Numerical Verification of Bounce Harmonic Resonances in Neoclassical Toroidal Viscosity for Tokamaks This Letter presents the rst numerical veri cation for the bounce-harmonic (BH) resonance phenomena of the neoclassical transport in a tokamak perturbed by non-axisymmetric magnetic

  17. Numerical analysis and measurement in corner-fired furnace

    SciTech Connect (OSTI)

    Zhengjun, S.; Rongsheng, G.

    1999-07-01

    For several years, numerical analysis has been successfully used by Dongfang Boiler (Group) Co., Ltd. at a 200MW boiler, a 300MW boiler and so on, which were designed and made by DBC. The distribution of results is agreement each other between numerical analysis and measurement. In conclusion, it is considered that numerical analysis can be used as an important reference method in pulverized coal boiler design and test.

  18. Rural electric cooperatives IRP survey

    SciTech Connect (OSTI)

    Garrick, C.

    1995-11-01

    This report summarizes the integrated resource planning (IRP) practices of US rural electric cooperatives and the IRP policies which influence these practices. It was prepared by the National Renewable Energy Laboratory (NREL) and its subcontractor Garrick and Associates to assist the US Department of Energy (DOE) in satisfying the reporting requirements of Title 1, Subtitle B, Section 111(e)(3) of the Energy Policy Act of 1992 (EPAct), which states: (e) Report--Not later than 2 years after the date of the enactment of this Act, the Secretary (of the US Department of Energy) shall transmit a report to the President and to the Congress containing--(the findings from several surveys and evaluations, including:); (3) a survey of practices and policies under which electric cooperatives prepare IRPs, submit such plans to REA, and the extent to which such integrated resource planning is reflected in rates charged to customers.

  19. Using fully coupled hydro-geomechanical numerical test bed to...

    Office of Scientific and Technical Information (OSTI)

    test bed to study reservoir stimulation with low hydraulic pressure Citation Details In-Document Search Title: Using fully coupled hydro-geomechanical numerical test bed to ...

  20. Numerical Analysis of Fixed Point Algorithms in the Presence...

    Office of Scientific and Technical Information (OSTI)

    in the Presence of Hardware Faults Citation Details In-Document Search Title: Numerical Analysis of Fixed Point Algorithms in the Presence of Hardware Faults You are ...

  1. Accurate and fast numerical solution of Poisson s equation for...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Accurate and fast numerical solution of Poisson ... Our method avoids all ill-convergent sums, is simple, accurate, efficient, and works ...

  2. Info-Gap Analysis of Truncation Errors in Numerical Simulations...

    Office of Scientific and Technical Information (OSTI)

    Title: Info-Gap Analysis of Truncation Errors in Numerical Simulations. Authors: Kamm, James R. ; Witkowski, Walter R. ; Rider, William J. ; Trucano, Timothy Guy ; Ben-Haim, Yakov. ...

  3. Info-Gap Analysis of Numerical Truncation Errors. (Conference...

    Office of Scientific and Technical Information (OSTI)

    Title: Info-Gap Analysis of Numerical Truncation Errors. Authors: Kamm, James R. ; Witkowski, Walter R. ; Rider, William J. ; Trucano, Timothy Guy ; Ben-Haim, Yakov. Publication ...

  4. A review of recent advances of numerical simulations of microscale...

    Office of Scientific and Technical Information (OSTI)

    Due to the reformer's small size, numerical simulations are critical to understand heat and mass transfer phenomena occurring in the systems. This paper reviews the development of ...

  5. History, Applications, Numerical Values and Problems with the...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Numerical Values and Problems with the Calculation of EROI (Energy Return on Energy Investment) Professor Charles Hall State University of NY College of Environmental Science and...

  6. Numerical Simulation of Ni Grain Growth in a Thermal Gradient

    Office of Scientific and Technical Information (OSTI)

    665C Numerical Simulation of Ni Grain Growth in a Thermal Gradient Sandia National Laboratories John A. Mitchell and Veena Tikare Sandia National Laboratories, Albuquerque New ...

  7. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  8. Numerical Modeling At Raft River Geothermal Area (1983) | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Raft River Geothermal Area (1983) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Numerical Modeling At Raft River Geothermal Area (1983)...

  9. Final Report on Experimental and Numerical Modeling Activities...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Final Report on Experimental and Numerical Modeling Activities for the Newark Basin Citation Details In-Document Search Title: Final Report on Experimental and ...

  10. Development of Numerical Simulation Capabilities for In Situ...

    Office of Scientific and Technical Information (OSTI)

    Numerical Simulation Capabilities for In Situ Heating of Oil Shale Hoda, Nazish ExxonMobil Upstream Research Company, Houston, TX, USA; Fang, Chen ExxonMobil Upstream Research...

  11. Numerical Modelling of Geothermal Systems a Short Introduction...

    Open Energy Information (Open El) [EERE & EIA]

    Modelling of Geothermal Systems a Short Introduction Jump to: navigation, search OpenEI Reference LibraryAdd to library General: Numerical Modelling of Geothermal Systems a Short...

  12. A Numerical Evaluation Of Electromagnetic Methods In Geothermal...

    Open Energy Information (Open El) [EERE & EIA]

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Numerical Evaluation Of Electromagnetic Methods In Geothermal Exploration - Discussion...

  13. Numerical Modeling At Coso Geothermal Area (1995) | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    transform is employed to characterize guided-wave's velocity-frequency dispersion, and numerical methods are used to simulate the guided-wave propagation. The modeling...

  14. Direct Numerical Simulations and Robust Predictions of Cloud...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    cloud. Credit: Computational Science and Engineering Laboratory, ETH Zurich, Switzerland Direct Numerical Simulations and Robust Predictions of Cloud Cavitation Collapse PI Name:...

  15. An Integrated Experimental and Numerical Study: Developing a...

    Open Energy Information (Open El) [EERE & EIA]

    in a numerical simulator (modified version of TOUGH2) that can adjust porosity and permeability fields according to experimentally observed chemical fluid-rock interactions...

  16. Numerical simulation of the environmental impact of hydraulic...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulation of the environmental impact of hydraulic fracturing of tightshale gas reservoirs on near-surface groundwater: Background, base cases, shallow reservoirs,...

  17. Numerical Modeling At Lightning Dock Geothermal Area (O'Brien...

    Open Energy Information (Open El) [EERE & EIA]

    Basin Additional References Retrieved from "http:en.openei.orgwindex.php?titleNumericalModelingAtLightningDockGeothermalArea(O%27Brien,EtAl.,1984)&oldid762871...

  18. Wind energy: An engineering survey

    SciTech Connect (OSTI)

    Nahas, M.N.; Mohamad, A.S.; Akyurt, M.; El-Kalay, A.K.

    1987-01-01

    This paper presents an extensive survey of literature about wind energy and wind machines, their design and their applications. The paper intends to provide those who plan for energy policy with thorough information about this renewable type of energy and the available machines that convert wind energy into useful mechanical or electrical work. The machines which are available at present range from the simple Savonius rotor to the powerful multi-blade windmills. The advantages and shortcomings of all types are discussed here.

  19. "Speak Up" Survey Results - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    in the survey. The goal is to use the results to continuously improve Hanford's safety culture and work environment. Results for the "Speak Up" Survey An Organizational Climate and...

  20. Utah Geological Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Logo: Utah Geological Survey Name: Utah Geological Survey Address: 1594 W. North Temple Place: Salt Lake City, Utah Zip: 84114-6100 Phone Number: 801.537.3300 Website:...

  1. STEP Non-Participant Survey Report

    Energy.gov [DOE]

    STEP Non-Participant Survey Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  2. Department of Energy Earned Value Management Survey Results ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of ...

  3. Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah Gamma Survey of a Permeable Reactive Barrier at...

  4. 2015 Readers' Survey: Tell us what you think!

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    online survey no later than Friday, June 19, 2015, by clicking on the survey link below: 2015 Readers' Survey Thank you Your responses will be kept completely confidential

  5. Category:Static Temperature Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Static Temperature Survey Jump to: navigation, search Geothermalpower.jpg Looking for the Static Temperature Survey page? For detailed information on Static Temperature Survey,...

  6. Survey of the Economics of Hydrogen Technologies | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Survey of the Economics of Hydrogen Technologies Survey of the Economics of Hydrogen Technologies Survey of the Economics of Hydrogen Technologies PDF icon 27079.pdf More Documents ...

  7. State Geological Survey Contributions to the National Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    North Dakota Geological Survey New Hampshire Geological Survey New Jersey Geological Survey New Mexico Bureau of Geology & Mineral Resources Nevada Bureau of Mines & Geology New ...

  8. Headquarters Facilities Master Security Plan - Chapter 7, Surveys...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7, Surveys and Reviews Headquarters Facilities Master Security Plan - Chapter 7, Surveys and Reviews 2016 Headquarters Facilities Master Security Plan - Chapter 7, Surveys and ...

  9. Housing characteristics, 1987: Residential Energy Consumption Survey

    SciTech Connect (OSTI)

    Not Available

    1989-05-26

    This report is the first of a series of reports based on data from the 1987 RECS. The 1987 RECS is the seventh in the series of national surveys of households and their energy suppliers. These surveys provide baseline information on how households in the United States use energy. A cross section of housing types such as single-family detached homes, townhouses, large and small apartment buildings, condominiums, and mobile homes were included in the survey. Data from the RECS and a companion survey, the Residential Transportation Energy Consumption Survey (RTECS), are available to the public in published reports such as this one and on public use tapes. 10 figs., 69 tabs.

  10. Site survey method and apparatus

    DOE Patents [OSTI]

    Oldham, James G.; Spencer, Charles R.; Begley, Carl L.; Meyer, H. Robert

    1991-06-18

    The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment.

  11. Site survey method and apparatus

    DOE Patents [OSTI]

    Oldham, J.G.; Spencer, C.R.; Begley, C.L.; Meyer, H.R.

    1991-06-18

    The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment. 19 figures.

  12. Helicopter magnetic survey conducted to locate wells

    SciTech Connect (OSTI)

    Veloski, G.A.; Hammack, R.W.; Stamp, V.; Hall, R.; Colina, K.

    2008-07-01

    A helicopter magnetic survey was conducted in August 2007 over 15.6 sq mi at the Naval Petroleum Reserve No. 3s (NPR-3) Teapot Dome Field near Casper, Wyoming. The surveys purpose was to accurately locate wells drilled there during more than 90 years of continuous oilfield operation. The survey was conducted at low altitude and with closely spaced flight lines to improve the detection of wells with weak magnetic response and to increase the resolution of closely spaced wells. The survey was in preparation for a planned CO2 flood for EOR, which requires a complete well inventory with accurate locations for all existing wells. The magnetic survey was intended to locate wells missing from the well database and to provide accurate locations for all wells. The ability of the helicopter magnetic survey to accurately locate wells was accomplished by comparing airborne well picks with well locations from an intense ground search of a small test area.

  13. Technology assessments in transportation: survey of recent literature

    SciTech Connect (OSTI)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  14. A survey of problems in divertor and edge plasma theory

    SciTech Connect (OSTI)

    Boozer, A. ); Braams, B.; Weitzner, H. . Courant Inst. of Mathematical Sciences); Cohen, R. ); Hazeltine, R. . Inst. for Fusion Studies); Hinton, F. ); Houlberg, W. (Oak

    1992-12-22

    Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician's point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

  15. A survey of problems in divertor and edge plasma theory

    SciTech Connect (OSTI)

    Boozer, A.; Braams, B.; Weitzner, H.; Cohen, R.; Hazeltine, R.; Hinton, F.; Houlberg, W.; Oktay, E.; Sadowski, W.; Post, D.; Sigmar, D.; Wootton, A.

    1992-12-22

    Theoretical physics problems related to divertor design are presented, organized by the region in which they occur. Some of the open questions in edge physics are presented from a theoretician`s point of view. After a cursory sketch of the fluid models of the edge plasma and their numerical realization, the following topics are taken up: time-dependent problems, non-axisymmetric effects, anomalous transport in the scrape-off layer, edge kinetic theory, sheath effects and boundary conditions in divertors, electric field effects, atomic and molecular data issues, impurity transport in the divertor region, poloidally localized power dissipation (MARFEs and dense gas targets), helium ash removal, and neutral transport. The report ends with a summary of selected problems of particular significance and a brief bibliography of survey articles and related conference proceedings.

  16. Simple intrinsic defects in GaAs : numerical supplement.

    SciTech Connect (OSTI)

    Schultz, Peter Andrew

    2012-04-01

    This Report presents numerical tables summarizing properties of intrinsic defects in gallium arsenide, GaAs, as computed by density functional theory. This Report serves as a numerical supplement to the results published in: P.A. Schultz and O.A. von Lilienfeld, 'Simple intrinsic defects in GaAs', Modelling Simul. Mater. Sci Eng., Vol. 17, 084007 (2009), and intended for use as reference tables for a defect physics package in device models. The numerical results for density functional theory calculations of properties of simple intrinsic defects in gallium arsenide are presented.

  17. Numerical simulation experiments on the long-term evolution of...

    Office of Scientific and Technical Information (OSTI)

    the long-term evolution of a CO2 plume under a sloping caprock Citation Details In-Document Search Title: Numerical simulation experiments on the long-term evolution of a CO2 plume ...

  18. Use of ARM observations and numerical models to determine radiative...

    Office of Scientific and Technical Information (OSTI)

    We investigated whether the West African anvil clouds connected with squall line MCSs passing over the Niamey ARM site could be simulated in a numerical model by comparing the ...

  19. A Numerical Evaluation Of Electromagnetic Methods In Geothermal...

    Open Energy Information (Open El) [EERE & EIA]

    L Pellerin, J M Johnston & G W Hohmann, Geophysics, 61(1), 1996, Pp 121-130 Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Numerical...

  20. Numerical study of heterogeneous mean temperature and shock wave...

    Office of Scientific and Technical Information (OSTI)

    We numerically study the gas oscillation with shock wave in a resonator of square cross section by solving the initial and boundary value problem of the system of three-dimensional ...

  1. An integrated experimental and numerical study: Developing a reaction

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    transport model that couples chemical reactions of mineral dissolution/precipitation with spatial and temporal flow variations in CO2/brine/rock systems | Department of Energy An integrated experimental and numerical study: Developing a reaction transport model that couples chemical reactions of mineral dissolution/precipitation with spatial and temporal flow variations in CO2/brine/rock systems An integrated experimental and numerical study: Developing a reaction transport model that

  2. Numerical simulations shed new light on early universe

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Numerical simulations shed new light on early universe Numerical simulations shed new light on early universe The code simulates conditions during the first few minutes of cosmological evolution to model the role of neutrinos, nuclei and other particles in shaping the early universe. April 21, 2016 Los Alamos scientists developed the BURST computer code to predict-to unprecedented precision-the amounts of light nuclei synthesized in the Big Bang. Los Alamos scientists developed the BURST

  3. Advancing Clouds Lifecycle Representation in Numerical Models Using

    Office of Scientific and Technical Information (OSTI)

    Innovative Analysis Methods that Bridge ARM Observations and Models Over a Breadth of Scales (Technical Report) | SciTech Connect Technical Report: Advancing Clouds Lifecycle Representation in Numerical Models Using Innovative Analysis Methods that Bridge ARM Observations and Models Over a Breadth of Scales Citation Details In-Document Search Title: Advancing Clouds Lifecycle Representation in Numerical Models Using Innovative Analysis Methods that Bridge ARM Observations and Models Over a

  4. Advancing cloud lifecycle representation in numerical models using

    Office of Scientific and Technical Information (OSTI)

    innovative analysis methods that bridge arm observations over a breadth of scales (Technical Report) | SciTech Connect Advancing cloud lifecycle representation in numerical models using innovative analysis methods that bridge arm observations over a breadth of scales Citation Details In-Document Search Title: Advancing cloud lifecycle representation in numerical models using innovative analysis methods that bridge arm observations over a breadth of scales From its location on the

  5. Numerical simulation study of silica and calcite dissolution around a

    Office of Scientific and Technical Information (OSTI)

    geothermal well by injecting high pH solutions with chelating agent. (Conference) | SciTech Connect Conference: Numerical simulation study of silica and calcite dissolution around a geothermal well by injecting high pH solutions with chelating agent. Citation Details In-Document Search Title: Numerical simulation study of silica and calcite dissolution around a geothermal well by injecting high pH solutions with chelating agent. Dissolution of silica, silicate, and calcite minerals in the

  6. radiological survey | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    radiological survey San Francisco Bay Area Aerial Radiation Assessment Survey (SAN JOSE and SAN FRANCISCO, California) - A helicopter may be seen flying at low altitudes over portions of the San Francisco Bay Area from January 29 through February 6, 2016. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from the National Nuclear... NNSA to Conduct Aerial Radiological Surveys Over Washington, D.C. and Baltimore, MD Areas WASHINGTON, D.C. AND BALTIMORE,

  7. Sample Employee Survey for Workplace Charging Planning

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sample Employee Survey for Workplace Charging Planning Plug-in electric vehicles (PEVs) use electricity as either their primary fuel or to improve fuel efficiency. Today, over 25 PEV models are available, expanding driver options. We are considering the installation of charging infrastructure to assist employees who drive PEVs to work. Your responses to this survey will be used to determine employee interest in this benefit. Participation in this survey is voluntary and you do not need to

  8. DC Survey 2013 | National Nuclear Security Administration | ...

    National Nuclear Security Administration (NNSA)

    management system NNSA emergency response assets highlighted NNSA displays helicopter in Baltimore NNSA to Conduct Aerial Radiation Monitoring Survey over Boston April 17-20

  9. Aeromagnetic Survey (Nannini, 1986) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    These surveys are based on the magnetic susceptibility contrast between magmatic rocks at depth and the sedimentary formations above. References Raffaello Nannini (1986)...

  10. Ground Gravity Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Et Al., 2000) Dixie Valley Geothermal Area 1999 2000 Precise Gravimetry and Geothermal Reservoir Management Ground Gravity Survey At Dixie Valley Geothermal Area (Blackwell, Et...

  11. Aeromagnetic Survey And Interpretation, Ascention Island, South...

    Open Energy Information (Open El) [EERE & EIA]

    And Interpretation, Ascention Island, South Atlantic Ocean Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Aeromagnetic Survey And...

  12. FAQs for Survey Form EIA-7A

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form(Includes Instructions). Calculator Conversion calculator Who can I contact? Survey ...

  13. FAQs for Survey Form EIA-8A

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  14. FAQs for Survey Form EIA-3

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for coal definitions. How does EIA classify coal rank? Rank types ... Forms (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  15. FAQs for Survey Form EIA-14

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    These prices are published in the following tables of the Petroleum Marketing Monthly ... If you are interested in receiving this free software, contact the Survey Respondent ...

  16. FAQs for Survey Form EIA-182

    Annual Energy Outlook

    price(s) are published in the Petroleum Marketing Monthly, the Monthly Energy Review, the ... If you are interested in receiving this free software, contact the Survey Respondent ...

  17. 2009 Annual Employee Survey Results for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9 Annual Employee Survey Results for Department of Energy All Respondents 1) ... This is an area that the agency will be closely reviewing following the 2010 Employee ...

  18. Geothermal resistivity resource evaluation survey Waunita Hot...

    Open Energy Information (Open El) [EERE & EIA]

    resistivity resource evaluation survey Waunita Hot Springs project, Gunnison County, Colorado Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Geothermal...

  19. Federal Buildings Supplemental Survey - Index Page

    U.S. Energy Information Administration (EIA) (indexed site)

    Buildings 1993 Federal Buildings Supplemental Survey Overview Full Report Tables Energy usage and energy costs, by building characteristics, for federally-owned buildings in...

  20. PRELIMINARY SURVEY OF WESTINGHOUSE ELECTRIC CORPORATION EAST...

    Office of Legacy Management (LM)

    From information obtained in discussions during the survey, the area utilized was apparently cleaned, and tools and equipment were decontaminated and subsequently sealed in drums ...

  1. Commercial Grade Dedication Survey and Training | Department...

    Office of Environmental Management (EM)

    More Documents & Publications Commercial Grade Dedication Survey and Training EM Commercial Grade Dedication Class Slides NQA-1 Commercial Grade Dedication Critical Characteristics

  2. Residential Energy Consumption Survey (RECS) - Analysis & Projections...

    Gasoline and Diesel Fuel Update

    EIA has conducted the Residential Energy Consumption Survey (RECS) since 1978 to provide data on home energy characteristics, end uses of energy, and expenses for the four Census ...

  3. Wyoming State Geological Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    navigation, search Name: Wyoming State Geological Survey Abbreviation: WSGS Address: P.O. Box 1347 Place: Laramie, Wyoming Zip: 82073 Year Founded: 1933 Phone Number:...

  4. 2007/2008 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation,...

  5. 2009/2010 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Next 20092010 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction All Satisfaction and Importance Ratings HPC Resources NERSC...

  6. 2010/2011 User Survey Results

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Next 20102011 User Survey Results Table of Contents Response Summary Respondent Demographics Score Legend Satisfaction and Importance Scores HPC Resources Software Services...

  7. Radiological survey results at the former Bridgeport Brass Company facility, Seymour, Connecticut

    SciTech Connect (OSTI)

    Foley, R.D.; Carrier, R.F.

    1993-06-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey of the former Bridgeport Brass Company facility, Seymour, Connecticut. The survey was performed in May 1992. The purpose of the survey was to determine if the facility had become contaminated with residuals containing radioactive materials during the work performed in the Ruffert building under government contract in the 1960s. The survey included a gamma scanning over a circumscribed area around the building, and gamma and beta-gamma scanning over all indoor surfaces as well as the collection of soil and other samples for radionuclide analyses. Results of the survey demonstrated radionuclide concentrations in indoor and outdoor samples, and radiation measurements over floor and wall surfaces, in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines. Elevated uranium concentrations outdoors were limited to several small, isolated spots. Radiation measurements exceeded guidelines indoors over numerous spots and areas inside the building, mainly in Rooms 1--6 that had been used in the early government work.

  8. Biofuels Quality Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quality Surveys Biofuels Quality Surveys 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ft013_alleman_2012_p.pdf (1.21 MB) More Documents & Publications Performance of Biofuels and Biofuel Blends Performance of Biofuels and Biofuel Blends Quality, Performance, and Emission Impacts of Biofuels and Biofuel Blends

  9. 2006 XSD Scientific Software User Survey.

    SciTech Connect (OSTI)

    Jemian, P. R.

    2007-01-22

    In preparation for the 2006 XSD Scientific Software workshop, our committee sent a survey on June 16 to 100 users in the APS user community. This report contains the survey and the responses we received. The responses are presented in the order received.

  10. Web Survey Requirements and Best Practices

    Office of Energy Efficiency and Renewable Energy (EERE)

    Surveys are a useful way to gauge the opinions of the Office of Energy Efficiency and Renewable Energy (EERE)'s target audiences. However, surveys often need approval from the Office of Management and Budget (OMB), which can take several months to complete.

  11. The 1986 residential occupant survey

    SciTech Connect (OSTI)

    Ivey, D.L.; Alley, P.K.

    1987-04-01

    In 1986, Pacific Northwest Laboratory developed the Residential Occupant Survey-Spring '86, which was implemented. The overall purpose of the study was to collect demographic, attitudinal, and behavioral data related to the use and conservation of electricity in dwellings participating in the Bonneville Power Administration's End-Use Load and Conservation Assessment Program (ELCAP). Information was collected on the respondents' perceptions of the energy efficiency of their dwelling, temperature the dwelling was kept when people were at home and awake during the last heating season, which rooms, if any, were not heated during the last heating season, number of times the dwelling was unoccupied for at least one week, number of times pets were let out of the dwelling per day, attitudes toward energy use and conservation and several socio-demographic variables such as age, sex, and total household income. The results of the data analyses showed age to be an important factor for reported indoor temperature and perceived energy efficiency of the dwelling. The results also showed that almost 60% of the ELCAP occupants do not heat one or more rooms during the heating season, and almost 45% of the ELCAP dwellings were unoccupied for at least one week during the reporting period. In terms of the reported allocation of household income for household energy expenses, the results showed that the reported dollar amount spent for the expenses remained relatively constant over income levels.

  12. Federal Buildings Supplemental Survey 1993

    SciTech Connect (OSTI)

    1995-11-01

    The Energy Information Administration (EIA) of the US Department of Energy (DOE) is mandated by Congress to be the agency that collects, analyzes, and disseminates impartial, comprehensive data about energy including the volume consumed, its customers, and the purposes for which it is used. The Federal Buildings Supplemental Survey (FBSS) was conducted by EIA in conjunction with DOE`s Office of Federal Energy Management Programs (OFEMP) to gain a better understanding of how Federal buildings use energy. This report presents the data from 881 completed telephone interviews with Federal buildings in three Federal regions. These buildings were systematically selected using OFEMP`s specifications; therefore, these data do not statistically represent all Federal buildings in the country. The purpose of the FBSS was threefold: (1) to understand the characteristics of Federal buildings and their energy use; (2) to provide a baseline in these three Federal regions to measure future energy use in Federal buildings as required in EPACT; and (3) to compare building characteristics and energy use with the data collected in the CBECS.

  13. Literature survey results: Topical report

    SciTech Connect (OSTI)

    Willson, W.G.; Ness, R.O.; Hendrikson, J.G.; Entzminger, J.A.; Jha, M.; Sinor, J.E.

    1988-01-01

    This report reviews mild gasification processes with respect to processing conditions and configurations. Special emphasis was placed on processes which could be commercialized within five years. Detailed market information was provided by J.E. Sinor concerning markets and economic considerations of the various processing steps. Processing areas studied include coal cleaning; mild gasification; and upgrading of the char, condensables, and hydrocarbon gases. Pros and cons in the different processing areas as well as ''gaps'' in pertinent data were identified and integrated into a detailed process development program. The report begins with a summary of the market assessment and an evaluation of the co-product. The impacts of feed materials and operating parameters--including coal rank, heating rate, pressure, agglomeration, temperature, and feed gas composition--on the co- products and processes were evaluated through a literature survey. Recommendations were made as to the preferred product specifications and operating parameters for a commercial plant. A literature review of mild gasification processes was conducted and evaluated with regard to product specification and operating parameters. Two candidate processes were chosen and discussed in detail with respect to scale-up feasibility. Recommendations were then made to process development needs to further consideration of the two processes. 129 refs., 33 figs., 16 tabs.

  14. Please take the 2011 user survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    take the 2011 user survey Please take the 2011 user survey June 6, 2011 by Francesca Verdier You are encouraged to take the 2011 user survey. Your answers are important to us and to our program sponsors in DOE. Subscribe via RSS Subscribe Browse by Date October 2016 September 2016 August 2016 June 2016 May 2016 April 2016 January 2016 December 2015 November 2015 October 2015 September 2015 August 2015 July 2015 April 2015 March 2015 January 2015 December 2014 November 2014 October 2014 August

  15. Mathematical and Numerical Analyses of Peridynamics for Multiscale Materials Modeling

    SciTech Connect (OSTI)

    Gunzburger, Max

    2015-02-17

    We have treated the modeling, analysis, numerical analysis, and algorithmic development for nonlocal models of diffusion and mechanics. Variational formulations were developed and finite element methods were developed based on those formulations for both steady state and time dependent problems. Obstacle problems and optimization problems for the nonlocal models were also treated and connections made with fractional derivative models.

  16. Simple intrinsic defects in InAs : numerical predictions.

    SciTech Connect (OSTI)

    Schultz, Peter Andrew

    2013-03-01

    This Report presents numerical tables summarizing properties of intrinsic defects in indium arsenide, InAs, as computed by density functional theory using semi-local density functionals, intended for use as reference tables for a defect physics package in device models.

  17. Translation and integration of numerical atomic orbitals in linear molecules

    SciTech Connect (OSTI)

    Heinäsmäki, Sami

    2014-02-14

    We present algorithms for translation and integration of atomic orbitals for LCAO calculations in linear molecules. The method applies to arbitrary radial functions given on a numerical mesh. The algorithms are based on pseudospectral differentiation matrices in two dimensions and the corresponding two-dimensional Gaussian quadratures. As a result, multicenter overlap and Coulomb integrals can be evaluated effectively.

  18. Numerical Modeling At Neal Hot Springs Geothermal Area (U.S....

    Open Energy Information (Open El) [EERE & EIA]

    Area Exploration Technique Numerical Modeling Activity Date 2011 - 2011 Usefulness useful DOE-funding Unknown Exploration Basis A numerical reservoir model was created to...

  19. 2008 B20 Survey Results (Presentation)

    SciTech Connect (OSTI)

    Alleman, T. L.; McCormick, R. L.

    2009-02-02

    Describes results of a sample survey of the quality of B20, a biodiesel blend, collected from U.S. public pumps and fleets as part of a joint effort by NREL, the NBB, and engine manufacturers.

  20. Mediation Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon Mediation Survey Form More Documents & Publications Microsoft Word - GC Mediation Evaluation 2-06-09.doc Mediation Brochure FIA-12-0044 - In the Matter of Cynthia Brown...

  1. FAQs for Survey Form EIA-782C

    Annual Energy Outlook

    ... software, contact the Survey Respondent Service Team at 202-586-9659. Where can I find published data from the EIA-782C? These data are published in the Petroleum Marketing ...

  2. FAQs for Survey Form EIA-821

    Gasoline and Diesel Fuel Update

    of your email. Should I report biodiesel on the EIA-821 survey? Report B2, B5, or B20 biodiesel under the primary fuel type with which it was blended and the type of customer...

  3. 2-M Probe Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Techniques A modified version of the 2 m temperature probe survey was tested at the Salt Wells Geothermal Area in 2005.2 This technique was used to measure temperatures at...

  4. Geothermal Energy Growth Continues, Industry Survey Reports

    Energy.gov [DOE]

    A survey released by the Geothermal Energy Association (GEA) shows continued growth in the number of new geothermal power projects under development in the United States, a 20% increase since January of this year.

  5. Commercial Grade Dedication Survey and Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    This survey was conducted to obtain input from EM contractors on processes used to perform Commercial Grade Item (CGI) dedication.  The intended use of this information is to form the basis for...

  6. NEPA effectiveness -- a survey of academics

    SciTech Connect (OSTI)

    Canter, L.; Clark, R.

    1997-09-01

    The National Environmental Policy Act (NEPA) went into effect in the United States on January 1, 1970, just over 25 years ago. In light of this milestone, a survey of academics on the effectiveness of NEPA has been conducted regarding the preparation of environmental assessments (EAs) or environmental impact statements (EISs). This paper summarizes the results of a survey of 31 academics in 12 disciplines from 21 states. Several strengths of NEPA were identified, most importantly that NEPA encourages agencies and decision makers: (1) to acknowledge potential environmental consequences to the public, thus opening up the decision process; and (2) to think about environmental consequences before resources are committed. Surveyed participants also prioritized needs for improvement. While this survey was focused on the NEPA process in the United States, the identified issues have implications for the worldwide practice of environmental impact assessment. Finally, recommendations are described that are primarily associated with guidance, possible modifications in the NEPA process and follow-on training.

  7. Directory and survey of particle physicists

    SciTech Connect (OSTI)

    1997-04-01

    In order to develop a clearer understanding of the demographics of the U.S. particle physics workforce, the US Department of Energy, the National Science Foundation, and the Division of Particles and Fields of the American Physical Society commissioned a survey and census of particle physicists employed in the United States. This survey and census were conducted in 1995, with an update of the census in April 1997. The agencies and the scientific community were represented for the 1995 efforts by Dr. Robert Woods (DOE), Dr. William Chinowsky (NSF), and Prof. Uriel Nauenberg (DPF); for the current census, by Dr. Robert Diebold (DOE), Dr. Marvin Goldberg (NSF), and Dr. Patricia Rankin (NSF). The survey/census were carried out with the assistance of the Particle Data Group at Lawrence Berkeley National Laboratory. In order to obtain an accurate study of the current workforce and of future needs, we requested that all HEP physicists fill out and return the 1995 survey. There were 2494 respondents. For the 1997 census, a representative of each university and laboratory was asked to provide information on all persons at that institution who spend at least 50% of their research time on particle physics. In some cases this includes accelerator physicists. The total number of physicists in the 1997 census is 3492 from 155 institutions in the United States. The full survey questionnaires are shown. The primary one was addressed to individual particle physicists, while the secondary one was addressed to principal investigators and sought information about people leaving the field. There are many possible tables and plots from this survey, with a variety of correlations. Those chosen are representative of a cross-section of the demographic results. It should be emphasized that this survey was a snapshot in time, and does not have the same capabilities as would a series of surveys that are periodic in time. Care should be taken in interpreting the results of the tables and plots.

  8. Steam System Survey Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Survey Guide Steam System Survey Guide This guide provides technical information for steam system operational personnel and plant energy managers on some of the major opportunities available to improve the energy efficiency and productivity of industrial steam systems. The guide covers five main areas of investigation: (1) profiling a steam system, (2) identifying steam properties for the steam system, (3) improving boiler operations, (4) improving resource utilization in the steam system, and

  9. Headquarters Facilities Master Security Plan - Chapter 7, Surveys and

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Reviews | Department of Energy 7, Surveys and Reviews Headquarters Facilities Master Security Plan - Chapter 7, Surveys and Reviews 2016 Headquarters Facilities Master Security Plan - Chapter 7, Surveys and Reviews This chapter covers the HQ Security Survey Program, which has two primary functions. First, survey team members assist HQ program elements in establishing, maintaining, and deactivating their LAs, VTRs, and TLAs. Second, the survey team conducts an annual assessment of how well

  10. 2009 - Federal Viewpoint Survey Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    09 - Federal Viewpoint Survey Reports 2009 - Federal Viewpoint Survey Reports The 2009 Trend report provides summary results for the Department or Energy's portion of the Federal Employee Viewpoint Survey. The report also shows how the 2009 results compare to the results of previous years. 2009 Annual Employee Survey Results (78.54 KB) 2009 Annual Employee Survey Comparison Report (135.13 KB) 2009 Annual Employee Survey Trend Report (62.54 KB) Responsible Contacts Thomasina Mathews PROGRAM

  11. DOE Initiative to Improve PM and EVM, Integration Survey Results...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration ...

  12. Category:Near Infrared Surveys | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Infrared Surveys Retrieved from "http:en.openei.orgwindex.php?titleCategory:NearInfraredSurveys&oldid794164" Feedback Contact needs updating Image needs updating...

  13. Idaho Geological Survey and University of Idaho Explore for Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Idaho Geological Survey and University of Idaho Explore for Geothermal Energy Idaho Geological Survey and University of Idaho Explore for Geothermal Energy January 11, 2013 -...

  14. Hubei Electric Power Survey Design Institute | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Survey Design Institute Jump to: navigation, search Name: Hubei Electric Power Survey&Design Institute Place: Hubei Province, China Product: Wuhan-based power project design and...

  15. Ground Gravity Survey At Clear Lake Area (Skokan, 1993) | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Clear Lake Area (Skokan, 1993) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Clear Lake Area...

  16. Ground Gravity Survey At Coso Geothermal Area (1980) | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Coso Geothermal Area (1980) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Coso Geothermal...

  17. Ground Gravity Survey At Crump's Hot Springs Area (DOE GTP) ...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Crump's Hot Springs Area (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Crump's Hot...

  18. Category:Airborne Gravity Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Category Edit History Category:Airborne Gravity Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the Airborne Gravity Survey...

  19. Ground Gravity Survey At North Brawley Geothermal Area (Biehler...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At North Brawley Geothermal Area (Biehler, 1964) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At...

  20. Ground Gravity Survey At Cove Fort Area - Vapor (Warpinski, Et...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Cove Fort Area - Vapor (Warpinski, Et Al., 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey...

  1. Ground Gravity Survey At Kilauea East Rift Geothermal Area (FURUMOTO...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Kilauea East Rift Geothermal Area (FURUMOTO, 1976) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey...

  2. Ground Gravity Survey At Snake River Plain Region (DOE GTP) ...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Snake River...

  3. Ground Gravity Survey At Kilauea East Rift Geothermal Area (Thomas...

    Open Energy Information (Open El) [EERE & EIA]

    Ground Gravity Survey At Kilauea East Rift Geothermal Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey...

  4. Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Information (Open El) [EERE & EIA]

    Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt Et Al, 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Geodetic Survey At...

  5. Oregon National Register and Survey Program Webpage | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    National Register and Survey Program Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon National Register and Survey Program Webpage...

  6. Manufacturing-Industrial Energy Consumption Survey(MECS) Historical...

    U.S. Energy Information Administration (EIA) (indexed site)

    reports, data tables and questionnaires Released: May 2008 The Manufacturing Energy Consumption Survey (MECS) is a periodic national sample survey devoted to measuring...

  7. Geodetic Survey At Yellowstone Region (Hellman & Ramsey, 2004...

    Open Energy Information (Open El) [EERE & EIA]

    Geodetic Survey At Yellowstone Region (Hellman & Ramsey, 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Geodetic Survey At Yellowstone...

  8. Title Preactivity Survey Report for Five Tonopah Test Range Explosive...

    National Nuclear Security Administration (NNSA)

    Preactivity Survey Report for Five Tonopah Test Range Explosive Ordnance Disposal Sites ... PREACTIVITY AND RECLAMATION SURVEY REPORTS FOR FIVE TONOPAH TEST RANGE EXPLOSIVE ORDNANCE ...

  9. Literature Survey of Crude Oil Properties Relevant to Handling...

    Office of Scientific and Technical Information (OSTI)

    Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport. Citation Details In-Document Search Title: Literature Survey of Crude Oil Properties ...

  10. Refraction Survey At Kilauea East Rift Geothermal Area (Broyles...

    Open Energy Information (Open El) [EERE & EIA]

    East Rift Geothermal Area Exploration Technique Refraction Survey Activity Date 1976 - 1977 Usefulness not indicated DOE-funding Unknown Exploration Basis This survey was done as...

  11. NREL Updates Survey of Advanced Biofuel Producers in the United...

    Office of Environmental Management (EM)

    and renewable hydrocarbon biofuels producers. The survey report, titled 2015 Survey of Non-Starch Ethanol and Renewable Hydrocarbon Biofuels Producers, documents important ...

  12. Airborne Electromagnetic Survey At Chena Geothermal Area (Kolker...

    Open Energy Information (Open El) [EERE & EIA]

    Phase I) Notes Fugro, Inc. performed an airborne geophysical survey using the DIGHEM (Digital Helicopter ElectroMagnetics) aircraft over a 937 km2 survey grid. An coplanar...

  13. EM Cleanup Chief Surveys Progress in Waste Isolation Pilot Plant...

    Office of Environmental Management (EM)

    Surveys Progress in Waste Isolation Pilot Plant Underground EM Cleanup Chief Surveys Progress in Waste Isolation Pilot Plant Underground April 14, 2016 - 12:45pm Addthis Pictured ...

  14. Confirmatory Survey Report for the Quehanna Decommissioning Project, Karthaus, PA

    SciTech Connect (OSTI)

    W. C. Adams

    2007-10-30

    The survey activities consisted of visual inspections and radiological surveys including beta and gamma surface scans and surface beta activity measurements.

  15. SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA...

    Office of Legacy Management (LM)

    SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work ... SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A ...

  16. Direct-Current Resistivity Survey At Kilauea East Rift Geothermal...

    Open Energy Information (Open El) [EERE & EIA]

    the findings from the other resistivity surveys conducted in the area. References James Kauahikaua, Douglas Klein (1978) Results of Electric Survey in the Area of Hawaii...

  17. Department of Energy: 2011 Federal Employee Viewpoint Survey...

    Energy.gov (indexed) [DOE]

    Department of Energy 2011 Federal Employee Viewpoint Survey: Trend Report Response Summary Surveys Completed 2011 Governmentwide 266,376 2011 Department of Energy 5,613 2010 ...

  18. Chapter 12, Survey Design and Implementation Cross-Cutting Protocols...

    Energy Savers

    ... (the total survey error) can be minimized for estimates developed from survey data. ... of interest, rather than from conducting a census of the entire population of interest. ...

  19. The Sloan Digital Sky Survey Monitor Telescope Pipeline (Journal...

    Office of Scientific and Technical Information (OSTI)

    The Sloan Digital Sky Survey Monitor Telescope Pipeline Citation Details In-Document Search Title: The Sloan Digital Sky Survey Monitor Telescope Pipeline You are accessing a...

  20. Tax and Fiscal Policies for Promotion of Industrial EnergyEfficiency: A Survey of International Experience

    SciTech Connect (OSTI)

    Price, Lynn; Galitsky, Christina; Sinton, Jonathan; Worrell,Ernst; Graus, Wina

    2005-09-15

    The Energy Foundation's China Sustainable Energy Program (CSEP) has undertaken a major project investigating fiscal and tax policy options for stimulating energy efficiency and renewable energy development in China. This report, which is part of the sectoral sub-project studies on energy efficiency in industry, surveys international experience with tax and fiscal policies directed toward increasing investments in energy efficiency in the industrial sector. The report begins with an overview of tax and fiscal policies, including descriptions and evaluations of programs that use energy or energy-related carbon dioxide (CO2) taxes, pollution levies, public benefit charges, grants or subsidies, subsidized audits, loans, tax relief for specific technologies, and tax relief as part of an energy or greenhouse gas (GHG) emission tax or agreement scheme. Following the discussion of these individual policies, the report reviews experience with integrated programs found in two countries as well as with GHG emissions trading programs. The report concludes with a discussion of the best practices related to international experience with tax and fiscal policies to encourage investment in energy efficiency in industry.

  1. On Numerical Considerations for Modeling Reactive Astrophysical Shocks

    SciTech Connect (OSTI)

    Papatheodore, Thomas L; Messer, Bronson

    2014-01-01

    Simulating detonations in astrophysical environments is often complicated by numerical approximations to shock structure. A common prescription to ensure correct detonation speeds (and associated quantities) is to prohibit burning inside the numerically broadened shock (Fryxell et al. 1989). We have performed a series of simulations to verify the efficacy of this approximation and to understand how resolution and dimensionality might affect its use. Our results show that, in one dimension, prohibiting burning in the shock is important wherever the carbon burning length is not resolved, in keeping with the results of Fryxell et al. (1989). In two dimensions, we find that the prohibition of shock burning effectively inhibits the development of cellular structure for all but the most highly-resolved cases. We discuss the possible impacts this outcome may have on sub-grid models and detonation propagation in Type Ia supernovae.

  2. Numerical study of thermoacoustic convection in a cavity

    SciTech Connect (OSTI)

    Fusegi, Toru; Farouk, B.; Oran, E.S.

    1995-12-31

    Thermoacoustic convection in a two-dimensional cavity is numerically studied. Part of a compressible fluid (Helium) near the center line of the cavity is suddenly energized to generate pressure waves. Numerical solutions are secured by employing a highly accurate explicit method termed LCPFCT algorithm for the convection terms of the full Navier-Stokes equations. Thermoacoustic waves, which decay in large time due to the viscosity of fluid, are of the oscillatory nature. Much higher heat transfer rate can be achieved in an initial stage of transient processes, compared to that due to conduction. When a partial length of the cavity center line is heated, resulting thermoacoustic waves exhibit remarkable two-dimensional patterns.

  3. AEETES---A solar reflux receiver thermal performance numerical model

    SciTech Connect (OSTI)

    Hogan, R.E. Jr.

    1991-01-01

    Reflux solar receivers for dish-Stirling electric power generation systems are currently being investigated by several companies and laboratories. In support of these efforts, the AEETES thermal performance numerical model has been developed to predict thermal performance of pool-boiler and heat-pipe reflux receivers. The formulation of the AEETES numerical model, which is applicable to axisymmetric geometries with asymmetric incident fluxes, is presented in detail. Thermal efficiency predictions agree to within 4.1% with test data from on-sun tests of a pool-boiler reflux receiver. Predicted absorber and sidewall temperatures agree with thermocouple data to within 3.3.% and 7.3%, respectively. The importance of accounting for the asymmetric incident fluxes is demonstrated in comparisons with predictions using azimuthally averaged variables. The predicted receiver heat losses are characterized in terms of convective, solar and infrared radiative, and conductive heat transfer mechanisms. 27 refs., 9 figs., 4 tabs.

  4. Numerical modeling of solar magnetostatic structures bounded by current sheets

    SciTech Connect (OSTI)

    Pizzo, V.J. )

    1990-12-01

    A numerical method for efficiently determining the magnetostatic equilibrium configuration of erupted solar flux concentrations, such as sunspots and flux tubes, is presented. The magnetic structures are taken to be approximately vertically oriented and axisymmetric in the surface layers and are assumed to be isolated from the surrounding photosphere by a vanishingly thin current sheet. Since the location of the current sheet is initially unknown, the final structure is generated iteratively as a free-surface problem, with the magnetic configuration for each iterate being obtained from the horizontal force balance equation, subject to the appropriate boundary conditions. Multigrid methods are used at each stage to solve the equilibrium equation, which is mapped algebraically into a body-fitted coordinate system via transfinite interpolation techniques. Several model flux tubes and sunspots are computed to illustrate the procedure, and the accuracy of the numerical method is assessed against exact analytic solutions. 32 refs.

  5. Numerical method for shear bands in ductile metal with inclusions

    SciTech Connect (OSTI)

    Plohr, Jee Yeon N [Los Alamos National Laboratory; Plohr, Bradley J [Los Alamos National Laboratory

    2010-01-01

    A numerical method for mesoscale simulation of high strain-rate loading of ductile metal containing inclusions is described. Because of small-scale inhomogeneities, such a composite material is prone to localized shear deformation (adiabatic shear bands). The modeling framework is the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. /27-139, 1992], which ensures that the micromechanical response of the material is reflected in the behavior of the composite at the mesoscale. To calculate the effective plastic strain rate when shear bands are present, the analytic and numerical analysis of shear bands by Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31-41, 1996] is adapted and extended.

  6. NREL Receives Numerous Accolades from Industry and DOE - News Releases |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    NREL Receives Numerous Accolades from Industry and DOE Lab honored with awards for sustainability; employees recognized for hydrogen, battery R&D November 8, 2012 The U.S. Department of Energy's (DOE)'s National Renewable Energy Laboratory (NREL) and its employees have garnered awards and recognition from industry groups for advancing energy research as well as furthering the lab's sustainable operating practices. Bryan Pivovar Named Charles W. Tobias Young Investigator by the

  7. Direct Numerical Simulations and Robust Predictions of Cloud Cavitation

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Collapse | Argonne Leadership Computing Facility Initiation of cloud cavitation collapse for 50,000 bubbles Initiation of cloud cavitation collapse for 50,000 bubbles. Jonas Sukys, ETH Zurich Direct Numerical Simulations and Robust Predictions of Cloud Cavitation Collapse PI Name: Petros Koumoutsakos PI Email: petros@ethz.ch Institution: ETH Zurich Allocation Program: INCITE Allocation Hours at ALCF: 72 Million Year: 2016 Research Domain: Engineering Cloud cavitation collapse-the evolution

  8. Numerical Simulation of Groundwater Withdrawal at the Nevada Test Site

    SciTech Connect (OSTI)

    Carroll, Rosemary; Giroux, Brian; Pohll, Greg; Hershey, Ronald; Russell, Charles; Howcroft, William

    2004-01-28

    Alternative uses of the Nevada Test Site (NTS) may require large amounts of water to construct and/or operate. The only abundant source of water at the NTS is groundwater. This report describes preliminary modeling to quantify the amount of groundwater available for development from three hydrographic areas at the NTS. Modeling was conducted with a three-dimensional transient numerical groundwater flow model.

  9. A Numerical Sensitivity Study of Aerosol Influence on Immersion Freezing

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Numerical Sensitivity Study of Aerosol Influence on Immersion Freezing in Mixed-Phase Stratiform Clouds Gijs de Boer, Tempei Hashino, Edwin W. Eloranta and Gregory J. Tripoli The University of Wisconsin - Madison (1) Introduction (1) Introduction Mixed-phase stratiform clouds are commonly observed at high latitudes (Shupe et al., 2006; de Boer et al., 2009a). These clouds significaly impact the atmospheric radiative budget, with reductions in wintertime radiative surface cooling estimated at

  10. Numerical simulations of the decay of primordial magnetic turbulence

    SciTech Connect (OSTI)

    Kahniashvili, Tina [McWilliams Center for Cosmology and Department of Physics, Carnegie Mellon University, 5000 Forbes Ave, Pittsburgh, Pennsylvania 15213 (United States); Department of Physics, Laurentian University, Ramsey Lake Road, Sudbury, ON P3E 2C (Canada); Abastumani Astrophysical Observatory, Ilia State University, 2A Kazbegi Ave, Tbilisi, GE-0160 (Georgia); Brandenburg, Axel [Nordita, AlbaNova University Center, Roslagstullsbacken 23, 10691 Stockholm (Sweden); Department of Astronomy, Stockholm University, SE 10691 Stockholm (Sweden); Tevzadze, Alexander G. [Abastumani Astrophysical Observatory, Ilia State University, 2A Kazbegi Ave, Tbilisi, GE-0160 (Georgia); Faculty of Exact and Natural Sciences, Tbilisi State University, 1 Chavchavadze Avenue Tbilisi, GE-0128 (Georgia); Ratra, Bharat [Department of Physics, Kansas State University, 116 Cardwell Hall, Manhattan, Kansas 66506 (United States)

    2010-06-15

    We perform direct numerical simulations of forced and freely decaying 3D magnetohydrodynamic turbulence in order to model magnetic field evolution during cosmological phase transitions in the early Universe. Our approach assumes the existence of a magnetic field generated either by a process during inflation or shortly thereafter, or by bubble collisions during a phase transition. We show that the final configuration of the magnetic field depends on the initial conditions, while the velocity field is nearly independent of initial conditions.

  11. Numerical solution of sand transport in hydraulic fracturing

    SciTech Connect (OSTI)

    Daneshy, A.A.; Crichlow, H.B.

    1980-02-07

    A numerical solution is developed for the deposition of a propping agent inside a hydraulic fracture. Such parameters as fluid leak-off into the formation, increase in sand concentration caused by leak-off, non-Newtonian fracturing fluids, hindered settling velocity, and an up-to-date geometry are taken into consideration. Three examples investigate the proppant deposition for low-, medium-, and high-viscosity fracturing fluids.

  12. Numerical Simulation of Turbulent Flows in Advanced Steam Generators |

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Argonne Leadership Computing Facility Numerical Simulation of Turbulent Flows in Advanced Steam Generators PI Name: Aleksandr Obabko PI Email: obabko@mcs.anl.gov Institution: Argonne National Laboratory Allocation Program: ALCC Allocation Hours at ALCF: 80 Million Year: 2016 Research Domain: Physics Failure of steam generators in pressurized water reactor (PWR) nuclear systems can lead to expensive plant shut--downs. Flow--induced vibrations in the steam generators was identified as a high

  13. Dispersion of helically corrugated waveguides: Analytical, numerical, and experimental study

    SciTech Connect (OSTI)

    Burt, G.; Ronald, K.; Young, A.R.; Phelps, A.D.R.; Cross, A.W.; Konoplev, I.V.; He, W.; Thomson, J.; Whyte, C.G.; Samsonov, S.V.; Denisov, G.G.; Bratman, V.L.

    2004-10-01

    Helically corrugated waveguides have recently been studied for use in various applications such as interaction regions in gyrotron traveling-wave tubes and gyrotron backward-wave oscillators and as a dispersive medium for passive microwave pulse compression. The paper presents a summary of various methods that can be used for analysis of the wave dispersion of such waveguides. The results obtained from an analytical approach, simulations with the three-dimensional numerical code MAGIC, and cold microwave measurements are analyzed and compared.

  14. COLLOQUIUM: History, Applications, Numerical Values and Problems with the

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Calculation of EROI - Energy Return on (Energy) Investment | Princeton Plasma Physics Lab March 2, 2016, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: History, Applications, Numerical Values and Problems with the Calculation of EROI - Energy Return on (Energy) Investment Professor Charles Hall State University of NY College of Environmental Science and Forestry Plants and animals are subjected to fierce selective pressure to do the "right thing" energetically, that is to

  15. Data Analytics for Numerical Simulations: Query based Visualization with

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Hadoop and In Situ Muti Parametric Studies | Argonne Leadership Computing Facility Data Analytics for Numerical Simulations: Query based Visualization with Hadoop and In Situ Muti Parametric Studies Event Sponsor: Mathematics and Computer Science Division Seminar Start Date: Nov 9 2016 - 10:30am Building/Room: Building 240/Room 4301 Location: Argonne National Laboratory Speaker(s): Bruno Raffin Speaker(s) Title: INRIA, Univ. Grenoble Alpes, France Host: Tom Peterka This talk will present two

  16. Numerical simulation of the hydrodynamical combustion to strange quark matter

    SciTech Connect (OSTI)

    Niebergal, Brian; Ouyed, Rachid; Jaikumar, Prashanth

    2010-12-15

    We present results from a numerical solution to the burning of neutron matter inside a cold neutron star into stable u,d,s quark matter. Our method solves hydrodynamical flow equations in one dimension with neutrino emission from weak equilibrating reactions, and strange quark diffusion across the burning front. We also include entropy change from heat released in forming the stable quark phase. Our numerical results suggest burning front laminar speeds of 0.002-0.04 times the speed of light, much faster than previous estimates derived using only a reactive-diffusive description. Analytic solutions to hydrodynamical jump conditions with a temperature-dependent equation of state agree very well with our numerical findings for fluid velocities. The most important effect of neutrino cooling is that the conversion front stalls at lower density (below {approx_equal}2 times saturation density). In a two-dimensional setting, such rapid speeds and neutrino cooling may allow for a flame wrinkle instability to develop, possibly leading to detonation.

  17. The Numerical Electromagnetics Code (NEC) - A Brief History

    SciTech Connect (OSTI)

    Burke, G J; Miller, E K; Poggio, A J

    2004-01-20

    The Numerical Electromagnetics Code, NEC as it is commonly known, continues to be one of the more widely used antenna modeling codes in existence. With several versions in use that reflect different levels of capability and availability, there are now 450 copies of NEC4 and 250 copies of NEC3 that have been distributed by Lawrence Livermore National Laboratory to a limited class of qualified recipients, and several hundred copies of NEC2 that had a recorded distribution by LLNL. These numbers do not account for numerous copies (perhaps 1000s) that were acquired through other means capitalizing on the open source code, the absence of distribution controls prior to NEC3 and the availability of versions on the Internet. In this paper we briefly review the history of the code that is concisely displayed in Figure 1. We will show how it capitalized on the research of prominent contributors in the early days of computational electromagnetics, how a combination of events led to the tri-service-supported code development program that ultimately led to NEC and how it evolved to the present day product. The authors apologize that space limitations do not allow us to provide a list of references or to acknowledge the numerous contributors to the code both of which can be found in the code documents.

  18. Transient productivity index for numerical well test simulations

    SciTech Connect (OSTI)

    Blanc, G.; Ding, D.Y.; Ene, A.

    1997-08-01

    The most difficult aspect of numerical simulation of well tests is the treatment of the Bottom Hole Flowing (BHF) Pressure. In full field simulations, this pressure is derived from the Well-block Pressure (WBP) using a numerical productivity index which accounts for the grid size and permeability, and for the well completion. This productivity index is calculated assuming a pseudo-steady state flow regime in the vicinity of the well and is therefore constant during the well production period. Such a pseudo-steady state assumption is no longer valid for the early time of a well test simulation as long as the pressure perturbation has not reached several grid-blocks around the well. This paper offers two different solutions to this problem: (1) The first one is based on the derivation of a Numerical Transient Productivity Index (NTPI) to be applied to Cartesian grids; (2) The second one is based on the use of a Corrected Transmissibility and Accumulation Term (CTAT) in the flow equation. The representation of the pressure behavior given by both solutions is far more accurate than the conventional one as shown by several validation examples which are presented in the following pages.

  19. Geothermal industry employment: Survey results & analysis

    SciTech Connect (OSTI)

    Not Available

    2005-09-01

    The Geothermal Energy Association (GEA) is ofteh asked about the socioeconomic and employment impact of the industry. Since available literature dealing with employment involved in the geothermal sector appeared relatively outdated, unduly focused on certain activities of the industry (e.g. operation and maintenance of geothermal power plants) or poorly reliable, GEA, in consultation with the DOE, decided to conduct a new employment survey to provide better answers to these questions. The main objective of this survey is to assess and characterize the current workforce involved in geothermal activities in the US. Several initiatives have therefore been undertaken to reach as many organizations involved in geothermal activities as possible and assess their current workforce. The first section of this document describes the methodology used to contact the companies involved in the geothermal sector. The second section presents the survey results and analyzes them. This analysis includes two major parts. The first part analyzes the survey responses, presents employment numbers that were captured and describes the major characteristics of the industry that have been identified. The second part of the analysis estimates the number of workers involved in companies that are active in the geothermal business but did not respond to the survey or could not be reached. Preliminary conclusions and the study limits and restrictions are then presented. The third section addresses the potential employment impact related to manufacturing and construction of new geothermal power facilities. Indirect and induced economic impacts related with such investment are also investigated.

  20. Industry survey for horizontal wells. Final report

    SciTech Connect (OSTI)

    Wilson, D.D.; Kaback, D.S. [CDM Federal Programs Corp., Denver, CO (United States); Denhan, M.E. [Westinghouse Savannah River Co., Aiken, SC (United States); Watkins, D. [CDM Federal Programs Corp., Aiken, SC (United States)

    1993-07-01

    An international survey of horizontal environmental wells was performed during May and June of 1993. The purpose of the survey was to provide the environmental industry with an inventory of horizontal environmental wells and information pertaining to the extent of the use of horizontal environmental wells, the variety of horizontal environmental well applications, the types of geologic and hydrogeologic conditions within which horizontal environmental wells have been installed, and the companies that perform horizontal environmental well installations. Other information, such as the cost of horizontal environmental well installations and the results of tests performed on the wells, is not complete but is provided as general information with the caveat that the information should not be used to compare drilling companies. The result of the survey is a catalogue of horizontal environmental wells that are categorized by the objective or use of the wells, the vertical depth of the wells, and the drilling company contracted to install the wells.

  1. Utility FGD Survey, January--December 1989

    SciTech Connect (OSTI)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. )

    1992-03-01

    The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

  2. Utility FGD survey, January--December 1989

    SciTech Connect (OSTI)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. )

    1992-03-01

    This is Volume 2 part 2, of the Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. This volume particularly contains basic design and performance data.

  3. Numerical simulation of steam injection processes with solvent

    SciTech Connect (OSTI)

    Zerpa, L.; Mendez, Z.

    1995-12-31

    In Venezuela during recent years, gas oil has been evaluated as an additive to increase steam injection process efficiency. The results of laboratory and field tests have shown a significant improvement in the production behavior. Despite these experiences, it is necessary to complement the information with results obtained from numerical simulation studies in order to know injection parameter effects, such as gas oil concentration, schemes and rates of injection, temperatures, etc., and also some mechanisms involved in the process. In this work, the results achieved in the numerical simulation of displacement tests with steam and gas oil are presented. A fully implicit 2-D thermal, three-phase compositional simulator was used to obtain all the data presented in this paper The numerical simulation results show a similar oil production performance to those obtained in the displacement tests with injection of gas oil and steam simultaneously. These results indicate rising of the production rate when the solvent concentration increases. They also reveal that the solvent co-injection scheme improves the productivity in relation to the gas oil pre-injection at low temperature. However, when gas oil is pre-injected at higher temperature, the oil production performance is similar to the co-injection scheme performance. This can attribute to the favorable temperature effect on the diffusion mechanisms. On the other hand, an increase of the gas oil injection rate causes a productivity reduction. In addition, the gas oil capacity to remove more viscous fractions than the original crude was verified. It was determined that the gas oil light fraction volatilization contributes to the process improvement. In general, these results confirm the benefit of using solvent and contribute to the understanding of process mechanisms.

  4. Solar Survey of PV System Owners: San Diego

    Energy.gov [DOE]

    The purpose of the survey was to understand the motivation, challenges and benefits perceived by individuals who decided to install solar systems in the City of San Diego. Approximately 2000 surveys were sent, and 641 surveys were completed. The primary response was from the residential sector. Individuals had the option to reply electronically, using Survey Monkey, or to complete a paper survey. All responses were combined and checked to ensure that there were no duplicates.

  5. 2014-Federal Viewpoint Survey Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4-Federal Viewpoint Survey Reports 2014-Federal Viewpoint Survey Reports The following highlight report focuses on the Department of Energy's areas of strengths and challenges, identifies areas of progress and opportunities for improvement. The Departments 2014 results are compared with the 2013 Government wide results. 2014 Federal Employee Viewpoint Survey Results: Annual Employee Survey (AES) Report (71.11 KB) 2014 Federal Employee Viewpoint Survey Results: Agency Management Report (AMR)

  6. Numerical Study on GRB-Jet Formation in Collapsars

    SciTech Connect (OSTI)

    Nagataki, Shigehiro; /Kyoto U., Yukawa Inst., Kyoto /KIPAC, Menlo Park; Takahashi, Rohta; /Tokyo U.; Mizuta, Akira; /Garching, Max Planck Inst.; Takiwaki, Tomoya; /Tokyo U.

    2006-08-22

    Two-dimensional magnetohydrodynamic simulations are performed using the ZEUS-2D code to investigate the dynamics of a collapsar that generates a GRB jet, taking account of realistic equation of state, neutrino cooling and heating processes, magnetic fields, and gravitational force from the central black hole and self gravity. It is found that neutrino heating processes are not so efficient to launch a jet in this study. It is also found that a jet is launched mainly by B{sub {phi}} fields that are amplified by the winding-up effect. However, since the ratio of total energy relative to the rest mass energy in the jet is not so high as several hundred, we conclude that the jets seen in this study are not be a GRB jet. This result suggests that general relativistic effects, which are not included in this study, will be important to generate a GRB jet. Also, the accretion disk with magnetic fields may still play an important role to launch a GRB jet, although a simulation for much longer physical time {approx} 10-100 s is required to confirm this effect. It is shown that considerable amount of {sup 56}Ni is synthesized in the accretion disk. Thus there will be a possibility for the accretion disk to supply sufficient amount of {sup 56}Ni required to explain the luminosity of a hypernova. Also, it is shown that neutron-rich matter due to electron captures with high entropy per baryon is ejected along the polar axis. Moreover, it is found that the electron fraction becomes larger than 0.5 around the polar axis near the black hole by {nu}{sub e} capture at the region. Thus there will be a possibility that r-process and r/p-process nucleosynthesis occur at these regions. Finally, much neutrons will be ejected from the jet, which suggests that signals from the neutron decays may be observed as the delayed bump of the light curve of the afterglow or gamma-rays.

  7. Numerical analysis of decoy state quantum key distribution protocols

    SciTech Connect (OSTI)

    Harrington, Jim W; Rice, Patrick R

    2008-01-01

    Decoy state protocols are a useful tool for many quantum key distribution systems implemented with weak coherent pulses, allowing significantly better secret bit rates and longer maximum distances. In this paper we present a method to numerically find optimal three-level protocols, and we examine how the secret bit rate and the optimized parameters are dependent on various system properties, such as session length, transmission loss, and visibility. Additionally, we show how to modify the decoy state analysis to handle partially distinguishable decoy states as well as uncertainty in the prepared intensities.

  8. Numerical simulation model for vertical flow in geothermal wells

    SciTech Connect (OSTI)

    Tachimori, M.

    1982-01-01

    A numerical simulation model for vertical flow in geothermal wells is presented. The model consists of equations for the conservation of mass, momentum, and energy, for thermodynamic state of water, for friction losses, for slip velocity relations, and of the criteria for various flow regimes. A new set of correlations and criteria is presented for two-phase flow to improve the accuracy of predictions; bubbly flow - Griffith and Wallis correlation, slug flow - Nicklin et al. one, annular-mist flow - Inoue and Aoki and modified by the author. The simulation method was verified by data from actual wells.

  9. ASSIMILATION OF DOPPLER RADAR DATA INTO NUMERICAL WEATHER MODELS

    SciTech Connect (OSTI)

    Chiswell, S.; Buckley, R.

    2009-01-15

    During the year 2008, the United States National Weather Service (NWS) completed an eight fold increase in sampling capability for weather radars to 250 m resolution. This increase is expected to improve warning lead times by detecting small scale features sooner with increased reliability; however, current NWS operational model domains utilize grid spacing an order of magnitude larger than the radar data resolution, and therefore the added resolution of radar data is not fully exploited. The assimilation of radar reflectivity and velocity data into high resolution numerical weather model forecasts where grid spacing is comparable to the radar data resolution was investigated under a Laboratory Directed Research and Development (LDRD) 'quick hit' grant to determine the impact of improved data resolution on model predictions with specific initial proof of concept application to daily Savannah River Site operations and emergency response. Development of software to process NWS radar reflectivity and radial velocity data was undertaken for assimilation of observations into numerical models. Data values within the radar data volume undergo automated quality control (QC) analysis routines developed in support of this project to eliminate empty/missing data points, decrease anomalous propagation values, and determine error thresholds by utilizing the calculated variances among data values. The Weather Research and Forecasting model (WRF) three dimensional variational data assimilation package (WRF-3DVAR) was used to incorporate the QC'ed radar data into input and boundary conditions. The lack of observational data in the vicinity of SRS available to NWS operational models signifies an important data void where radar observations can provide significant input. These observations greatly enhance the knowledge of storm structures and the environmental conditions which influence their development. As the increase in computational power and availability has made higher

  10. Numerical simulation of carbon arc discharge for nanoparticle synthesis

    SciTech Connect (OSTI)

    Kundrapu, M.; Keidar, M.

    2012-07-15

    Arc discharge with catalyst-filled carbon anode in helium background was used for the synthesis of carbon nanoparticles. In this paper, we present the results of numerical simulation of carbon arc discharges with arc current varying from 10 A to 100 A in a background gas pressure of 68 kPa. Anode sublimation rate and current voltage characteristics are compared with experiments. Distribution of temperature and species density, which is important for the estimation of the growth of nanoparticles, is obtained. The probable location of nanoparticle growth region is identified based on the temperature range for the formation of catalyst clusters.

  11. Numerical calculation of the ion polarization in MEIC

    SciTech Connect (OSTI)

    Derbenev, Yaroslav; Lin, Fanglei; Morozov, Vasiliy; Zhang, Yuhong; Kondratenko, Anatoliy; Kondratenko, M A; Filatov, Yury

    2015-09-01

    Ion polarization in the Medium-energy Electron-Ion Collider (MEIC) is controlled by means of universal 3D spin rotators designed on the basis of "weak" solenoids. We use numerical calculations to demonstrate that the 3D rotators have negligible effect on the orbital properties of the ring. We present calculations of the polarization dynamics along the collider's orbit for both longitudinal and transverse polarization directions at a beam interaction point. We calculate the degree of depolarization due to the longitudinal and transverse beam emittances in case when the zero-integer spin resonance is compensated.

  12. Advanced numerical methods in mesh generation and mesh adaptation

    SciTech Connect (OSTI)

    Lipnikov, Konstantine; Danilov, A; Vassilevski, Y; Agonzal, A

    2010-01-01

    Numerical solution of partial differential equations requires appropriate meshes, efficient solvers and robust and reliable error estimates. Generation of high-quality meshes for complex engineering models is a non-trivial task. This task is made more difficult when the mesh has to be adapted to a problem solution. This article is focused on a synergistic approach to the mesh generation and mesh adaptation, where best properties of various mesh generation methods are combined to build efficiently simplicial meshes. First, the advancing front technique (AFT) is combined with the incremental Delaunay triangulation (DT) to build an initial mesh. Second, the metric-based mesh adaptation (MBA) method is employed to improve quality of the generated mesh and/or to adapt it to a problem solution. We demonstrate with numerical experiments that combination of all three methods is required for robust meshing of complex engineering models. The key to successful mesh generation is the high-quality of the triangles in the initial front. We use a black-box technique to improve surface meshes exported from an unattainable CAD system. The initial surface mesh is refined into a shape-regular triangulation which approximates the boundary with the same accuracy as the CAD mesh. The DT method adds robustness to the AFT. The resulting mesh is topologically correct but may contain a few slivers. The MBA uses seven local operations to modify the mesh topology. It improves significantly the mesh quality. The MBA method is also used to adapt the mesh to a problem solution to minimize computational resources required for solving the problem. The MBA has a solid theoretical background. In the first two experiments, we consider the convection-diffusion and elasticity problems. We demonstrate the optimal reduction rate of the discretization error on a sequence of adaptive strongly anisotropic meshes. The key element of the MBA method is construction of a tensor metric from hierarchical edge

  13. Numerical routines for predicting ignition in pyrotechnic devices

    SciTech Connect (OSTI)

    Pierce, K.G.

    1986-06-01

    Two numerical models of the thermal processes leading to ignition in a pyrotechnic device have been developed. These models are based on finite difference approximations to the heat diffusion equation, with temperature-dependent thermal properties, in a single spatial coordinate. The derivation of the finite difference equations is discussed and the methods employed at boundaries and interfaces are given. The sources of the thermal-properties data are identified and how these data are used is explained. The program structure is explained and example runs of the programs are given.

  14. High numerical aperture projection system for extreme ultraviolet projection lithography

    DOE Patents [OSTI]

    Hudyma, Russell M.

    2000-01-01

    An optical system is described that is compatible with extreme ultraviolet radiation and comprises five reflective elements for projecting a mask image onto a substrate. The five optical elements are characterized in order from object to image as concave, convex, concave, convex, and concave mirrors. The optical system is particularly suited for ring field, step and scan lithography methods. The invention uses aspheric mirrors to minimize static distortion and balance the static distortion across the ring field width which effectively minimizes dynamic distortion. The present invention allows for higher device density because the optical system has improved resolution that results from the high numerical aperture, which is at least 0.14.

  15. Diffusive mesh relaxation in ALE finite element numerical simulations

    SciTech Connect (OSTI)

    Dube, E.I.

    1996-06-01

    The theory for a diffusive mesh relaxation algorithm is developed for use in three-dimensional Arbitary Lagrange/Eulerian (ALE) finite element simulation techniques. This mesh relaxer is derived by a variational principle for an unstructured 3D grid using finite elements, and incorporates hourglass controls in the numerical implementation. The diffusive coefficients are based on the geometric properties of the existing mesh, and are chosen so as to allow for a smooth grid that retains the general shape of the original mesh. The diffusive mesh relaxation algorithm is then applied to an ALE code system, and results from several test cases are discussed.

  16. Numerical studies of the radiant flash pyrolysis of cellulose

    SciTech Connect (OSTI)

    Kothari, V.; Antal, M.J. Jr.

    1983-01-01

    When biomass particles are heated very rapidly (temperatures greater than 1000 degrees/s) in an oxygen free environment, they undergo pyrolysis with the formation of little or no char. If concentrated solar energy is used to rapidly heat the particles their temperature may exceed that of the surrounding gaseous environment by several hundred degrees Celsius when pyrolysis occurs. This two temperature effect gives rise to the formation of high yields of syrups from the pyrolyzing biomass. Numerical exploration of the combined effects of heat and mass transfer on the radiative flash pyrolysis phenonmena are described in this paper. 12 references.

  17. Transferring 2001 National Household Travel Survey

    SciTech Connect (OSTI)

    Hu, Patricia S; Reuscher, Tim; Schmoyer, Richard L; Chin, Shih-Miao

    2007-05-01

    Policy makers rely on transportation statistics, including data on personal travel behavior, to formulate strategic transportation policies, and to improve the safety and efficiency of the U.S. transportation system. Data on personal travel trends are needed to examine the reliability, efficiency, capacity, and flexibility of the Nation's transportation system to meet current demands and to accommodate future demand. These data are also needed to assess the feasibility and efficiency of alternative congestion-mitigating technologies (e.g., high-speed rail, magnetically levitated trains, and intelligent vehicle and highway systems); to evaluate the merits of alternative transportation investment programs; and to assess the energy-use and air-quality impacts of various policies. To address these data needs, the U.S. Department of Transportation (USDOT) initiated an effort in 1969 to collect detailed data on personal travel. The 1969 survey was the first Nationwide Personal Transportation Survey (NPTS). The survey was conducted again in 1977, 1983, 1990, 1995, and 2001. Data on daily travel were collected in 1969, 1977, 1983, 1990 and 1995. In 2001, the survey was renamed the National Household Travel Survey (NHTS) and it collected both daily and long-distance trips. The 2001 survey was sponsored by three USDOT agencies: Federal Highway Administration (FHWA), Bureau of Transportation Statistics (BTS), and National Highway Traffic Safety Administration (NHTSA). The primary objective of the survey was to collect trip-based data on the nature and characteristics of personal travel so that the relationships between the characteristics of personal travel and the demographics of the traveler can be established. Commercial and institutional travel were not part of the survey. Due to the survey's design, data in the NHTS survey series were not recommended for estimating travel statistics for categories smaller than the combination of Census division (e.g., New England, Middle

  18. Aerial radiological surveys of Steed Pond, Savannah River Site: Dates of surveys, 1984--1989

    SciTech Connect (OSTI)

    Fritzsche, A.E.; Jobst, J.E.

    1993-09-01

    From June 1984 to August 1985, three aerial radiological surveys were conducted over Steed Pond at the Savannah River Site in South Carolina. In addition, Steed Pond was included in larger-area surveys of the Savannah River Site in subsequent years. The surveys were conducted by the Remote Sensing Laboratory of EG&G Energy Measurements, Inc., Las Vegas, Nevada, for the US Department of Energy. Airborne measurements were obtained for both natural and man-made gamma radiation over Steed Pond and surrounding areas. The first survey was conducted when the pond was filled to normal capacity for the time of the year. On September 1, 1984, the Steed Pond dam spillway failed causing the pond to drain. The four subsequent surveys were conducted with the pond drained. The second survey and the third were conducted to study silt deposits exposed by the drop in water level after the spillway`s opening. Steed Pond data from the February 1987 and April 1989 Savannah River Site surveys have been included to bring this study up to date.

  19. Numerical analysis of the spatial range of the Kondo effect

    SciTech Connect (OSTI)

    Busser, C. A.; Martins, G. B.; Ribeiro, L. Costa; Vernek, E.; Anda, E. V.; Dagotto, Elbio R

    2010-01-01

    The spatial length of the Kondo screening is still a controversial issue related to Kondo physics. While renormalization-group and Bethe-Ansatz solutions have provided detailed information about the thermodynamics of magnetic impurities, they are insufficient to study the effect on the surrounding electrons, i.e., the spatial range of the correlations created by the Kondo effect between the localized magnetic moment and the conduction electrons. The objective of this work is to present a quantitative way of measuring the extension of these correlations by studying their effect directly on the local density of states (LDOS) at arbitrary distances from the impurity. The numerical techniques used, the embedded cluster approximation, the finite-U slave bosons, and numerical renormalization group, calculate the Green s functions in real space. With this information, one can calculate how the local density of states away from the impurity is modified by its presence, below and above the Kondo temperature, and then estimate the range of the disturbances in the noninteracting Fermi sea due to the Kondo effect, and how it changes with the Kondo temperature TK. The results obtained agree with results obtained through spin-spin correlations, showing that the LDOS captures the phenomenology of the Kondo cloud as well.

  20. Teaching Thermal Hydraulics & Numerical Methods: An Introductory Control Volume Primer

    SciTech Connect (OSTI)

    D. S. Lucas

    2004-10-01

    A graduate level course for Thermal Hydraulics (T/H) was taught through Idaho State University in the spring of 2004. A numerical approach was taken for the content of this course since the students were employed at the Idaho National Laboratory and had been users of T/H codes. The majority of the students had expressed an interest in learning about the Courant Limit, mass error, semi-implicit and implicit numerical integration schemes in the context of a computer code. Since no introductory text was found the author developed notes taught from his own research and courses taught for Westinghouse on the subject. The course started with a primer on control volume methods and the construction of a Homogeneous Equilibrium Model (HEM) (T/H) code. The primer was valuable for giving the students the basics behind such codes and their evolution to more complex codes for Thermal Hydraulics and Computational Fluid Dynamics (CFD). The course covered additional material including the Finite Element Method and non-equilibrium (T/H). The control volume primer and the construction of a three-equation (mass, momentum and energy) HEM code are the subject of this paper . The Fortran version of the code covered in this paper is elementary compared to its descendants. The steam tables used are less accurate than the available commercial version written in C Coupled to a Graphical User Interface (GUI). The Fortran version and input files can be downloaded at www.microfusionlab.com.

  1. Numerical Model for Conduction-Cooled Current Lead Heat Loads

    SciTech Connect (OSTI)

    White, M.J.; Wang, X.L.; Brueck, H.D.; /DESY

    2011-06-10

    Current leads are utilized to deliver electrical power from a room temperature junction mounted on the vacuum vessel to a superconducting magnet located within the vacuum space of a cryostat. There are many types of current leads used at laboratories throughout the world; however, conduction-cooled current leads are often chosen for their simplicity and reliability. Conduction-cooled leads have the advantage of using common materials, have no superconducting/normal state transition, and have no boil-off vapor to collect. This paper presents a numerical model for conduction-cooled current lead heat loads. This model takes into account varying material and fluid thermal properties, varying thicknesses along the length of the lead, heat transfer in the circumferential and longitudinal directions, electrical power dissipation, and the effect of thermal intercepts. The model is validated by comparing the numerical model results to ideal cases where analytical equations are valid. In addition, the XFEL (X-Ray Free Electron Laser) prototype current leads are modeled and compared to the experimental results from testing at DESY's XFEL Magnet Test Stand (XMTS) and Cryomodule Test Bench (CMTB).

  2. Numerical and experimental analysis of a retrievable offshore loading facility

    SciTech Connect (OSTI)

    Sterndorff, M.J.; O`Brien, P.

    1995-12-31

    ROLF (Retrievable Offshore Loading Facility) has been proposed as an alternative offshore oil export tanker loading system for the North Sea. The system consists of a flexible riser ascending from the seabed in a lazy wave configuration to the bow of a dynamically positioned tanker. In order to supplant and support the numerical analyses performed to design the system, an extensive model test program was carried out in a 3D offshore basin at scale 1:50. A model riser with properties equivalent to the properties of the oil filled prototype riser installed in seawater was tested in several combinations of waves and current. During the tests the forces at the bow of the tanker and at the pipeline end manifold were measured together with the motions of the tanker and the riser. The riser motions were measured by means of a video based 3D motion monitoring system. Of special importance was accurate determination of the minimum bending radius for the riser. This was derived based on the measured riser motions. The results of the model tests were compared to numerical analyses by an MCS proprietary riser analysis program.

  3. Numerical simulation of multi-layered textile composite reinforcement forming

    SciTech Connect (OSTI)

    Wang, P.; Hamila, N.; Boisse, P.

    2011-05-04

    One important perspective in aeronautics is to produce large, thick or/and complex structural composite parts. The forming stage presents an important role during the whole manufacturing process, especially for LCM processes (Liquid Composites Moulding) or CFRTP (Continuous Fibre Reinforcements and Thermoplastic resin). Numerical simulations corresponding to multi-layered composite forming allow the prediction for a successful process to produce the thick parts, and importantly, the positions of the fibres after forming to be known. This paper details a set of simulation examples carried out by using a semi-discrete shell finite element made up of unit woven cells. The internal virtual work is applied on all woven cells of the element taking into account tensions, in-plane shear and bending effects. As one key problem, the contact behaviours of tool/ply and ply/ply are described in the numerical model. The simulation results not only improve our understanding of the multi-layered composite forming process but also point out the importance of the fibre orientation and inter-ply friction during formability.

  4. A hybrid numerical fluid dynamics code for resistive magnetohydrodynamics

    Energy Science and Technology Software Center (OSTI)

    2006-04-01

    Spasmos is a computational fluid dynamics code that uses two numerical methods to solve the equations of resistive magnetohydrodynamic (MHD) flows in compressible, inviscid, conducting media[1]. The code is implemented as a set of libraries for the Python programming language[2]. It represents conducting and non-conducting gases and materials with uncomplicated (analytic) equations of state. It supports calculations in 1D, 2D, and 3D geometry, though only the 1D configuation has received significant testing to date. Becausemore » it uses the Python interpreter as a front end, users can easily write test programs to model systems with a variety of different numerical and physical parameters. Currently, the code includes 1D test programs for hydrodynamics (linear acoustic waves, the Sod weak shock[3], the Noh strong shock[4], the Sedov explosion[5], magnetic diffusion (decay of a magnetic pulse[6], a driven oscillatory "wine-cellar" problem[7], magnetic equilibrium), and magnetohydrodynamics (an advected magnetic pulse[8], linear MHD waves, a magnetized shock tube[9]). Spasmos current runs only in a serial configuration. In the future, it will use MPI for parallel computation.« less

  5. A hybrid numerical fluid dynamics code for resistive magnetohydrodynamics

    SciTech Connect (OSTI)

    2006-04-01

    Spasmos is a computational fluid dynamics code that uses two numerical methods to solve the equations of resistive magnetohydrodynamic (MHD) flows in compressible, inviscid, conducting media[1]. The code is implemented as a set of libraries for the Python programming language[2]. It represents conducting and non-conducting gases and materials with uncomplicated (analytic) equations of state. It supports calculations in 1D, 2D, and 3D geometry, though only the 1D configuation has received significant testing to date. Because it uses the Python interpreter as a front end, users can easily write test programs to model systems with a variety of different numerical and physical parameters. Currently, the code includes 1D test programs for hydrodynamics (linear acoustic waves, the Sod weak shock[3], the Noh strong shock[4], the Sedov explosion[5], magnetic diffusion (decay of a magnetic pulse[6], a driven oscillatory "wine-cellar" problem[7], magnetic equilibrium), and magnetohydrodynamics (an advected magnetic pulse[8], linear MHD waves, a magnetized shock tube[9]). Spasmos current runs only in a serial configuration. In the future, it will use MPI for parallel computation.

  6. The Dark Energy Survey Data Management System

    SciTech Connect (OSTI)

    Mohr, Joseph J.; Barkhouse, Wayne; Beldica, Cristina; Bertin, Emmanuel; Dora Cai, Y.; Nicolaci da Costa, Luiz A.; Darnell, J.Anthony; Daues, Gregory E.; Jarvis, Michael; Gower, Michelle; Lin, Huan; /Fermilab /Rio de Janeiro Observ.

    2008-07-01

    The Dark Energy Survey (DES) collaboration will study cosmic acceleration with a 5000 deg2 griZY survey in the southern sky over 525 nights from 2011-2016. The DES data management (DESDM) system will be used to process and archive these data and the resulting science ready data products. The DESDM system consists of an integrated archive, a processing framework, an ensemble of astronomy codes and a data access framework. We are developing the DESDM system for operation in the high performance computing (HPC) environments at the National Center for Supercomputing Applications (NCSA) and Fermilab. Operating the DESDM system in an HPC environment offers both speed and flexibility. We will employ it for our regular nightly processing needs, and for more compute-intensive tasks such as large scale image coaddition campaigns, extraction of weak lensing shear from the full survey dataset, and massive seasonal reprocessing of the DES data. Data products will be available to the Collaboration and later to the public through a virtual-observatory compatible web portal. Our approach leverages investments in publicly available HPC systems, greatly reducing hardware and maintenance costs to the project, which must deploy and maintain only the storage, database platforms and orchestration and web portal nodes that are specific to DESDM. In Fall 2007, we tested the current DESDM system on both simulated and real survey data. We used TeraGrid to process 10 simulated DES nights (3TB of raw data), ingesting and calibrating approximately 250 million objects into the DES Archive database. We also used DESDM to process and calibrate over 50 nights of survey data acquired with the Mosaic2 camera. Comparison to truth tables in the case of the simulated data and internal crosschecks in the case of the real data indicate that astrometric and photometric data quality is excellent.

  7. Mathematical and Numerical Analyses of Peridynamics for Multiscale Materials Modeling

    SciTech Connect (OSTI)

    Du, Qiang

    2014-11-12

    The rational design of materials, the development of accurate and efficient material simulation algorithms, and the determination of the response of materials to environments and loads occurring in practice all require an understanding of mechanics at disparate spatial and temporal scales. The project addresses mathematical and numerical analyses for material problems for which relevant scales range from those usually treated by molecular dynamics all the way up to those most often treated by classical elasticity. The prevalent approach towards developing a multiscale material model couples two or more well known models, e.g., molecular dynamics and classical elasticity, each of which is useful at a different scale, creating a multiscale multi-model. However, the challenges behind such a coupling are formidable and largely arise because the atomistic and continuum models employ nonlocal and local models of force, respectively. The project focuses on a multiscale analysis of the peridynamics materials model. Peridynamics can be used as a transition between molecular dynamics and classical elasticity so that the difficulties encountered when directly coupling those two models are mitigated. In addition, in some situations, peridynamics can be used all by itself as a material model that accurately and efficiently captures the behavior of materials over a wide range of spatial and temporal scales. Peridynamics is well suited to these purposes because it employs a nonlocal model of force, analogous to that of molecular dynamics; furthermore, at sufficiently large length scales and assuming smooth deformation, peridynamics can be approximated by classical elasticity. The project will extend the emerging mathematical and numerical analysis of peridynamics. One goal is to develop a peridynamics-enabled multiscale multi-model that potentially provides a new and more extensive mathematical basis for coupling classical elasticity and molecular dynamics, thus enabling next

  8. Take the the Annual NERSC Survey - Closes January 31

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Take the the Annual NERSC Survey Take the the Annual NERSC Survey - Closes January 31 January 9, 2014 by Francesca Verdier User input on the annual NERSC survey is important to us. We use the survey to help us set priorities and to get a realistic view of which things are going well and which need more attention. Here is the link to the survey, which closes January 31: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2013/ Subscribe via RSS Subscribe Browse by Date

  9. Please take the 2012 NERSC Usr Survey (now closed)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Please take the 2012 NERSC Usr Survey Please take the 2012 NERSC Usr Survey (now closed) January 1, 2013 by Francesca Verdier Please take a few minutes to fill out NERSC's annual user survey. Your feedback is important because it allows us to judge the quality of our services, give DOE information on how we are doing, and point us to areas in which we can improve. The survey is on the web at the URL: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2012/ The survey,

  10. Numerical Modeling of Impact Initiation of High Explosives

    SciTech Connect (OSTI)

    Wu, C J; Piggott, T; Yoh, J; Reaugh, J

    2006-05-31

    We performed continuum mechanics simulations to examine the behavior of energetic materials in Ballistic Chamber Impact (BIC) experiments, using an Arbitrary Lagrangian-Eulerian code (ALE3D). Our simulations revealed that interface friction plays an important role in inducing the formation of shear bands, which result in 'hot spots' for ignition. The temperature localization during BIC impact was found to be significant in materials with high yield strength. In those materials, there are multiple locations inside shear bands can achieve temperatures exceeding the threshold temperature for reaction. In addition, we investigated the relevant parameters influencing the pressure profile of a BIC test by numerical analysis from a simple phenomenological model. To our surprise, we found that the peaks of BIC pressure profiles not only can be a result of multi-center chemical reactions, but can also arise from factors associated apparatus configuration.

  11. Progress report on LBL's numerical modeling studies on Cerro Prieto

    SciTech Connect (OSTI)

    Halfman-Dooley, S.E.; Lippman, M.J.; Bodvarsson, G.S.

    1989-04-01

    An exploitation model of the Cerro Prieto geothermal system is needed to assess the energy capacity of the field, estimate its productive lifetime and develop an optimal reservoir management plan. The model must consider the natural state (i.e., pre-exploitation) conditions of the system and be able to predict changes in the reservoir thermodynamic conditions (and fluid chemistry) in response to fluid production (and injection). This paper discusses the results of a three-dimensional numerical simulation of the natural state conditions of the Cerro Prieto field and compares computed and observed pressure and temperature/enthalpy changes for the 1973--1987 production period. 16 refs., 24 figs., 2 tabs.

  12. Numerical studies of the radiant flash pyrolysis of cellulose

    SciTech Connect (OSTI)

    Kothari, V.; Antal, M.J.

    1983-01-01

    When biomass particles are heated very rapidly (>1000/sup 0/C/s) in an oxygen free environment, they undergo pyrolysis with the formation of little or no char. If concentrated solar energy is used to rapidly heat the particles, their temperature may exceed that of the surrounding gaseous environment by several hundred degrees Celsius when pyrolysis occurs. This ''two temperature'' effect gives rise to the formation of high yields of sirups from the pyrolyzing biomass. Interest in the selective formation of sirups during the radiative flash pyrolysis of biomass caused the authors to initiate numerical explorations of the combined effects of heat and mass transfer on the radiative flash pyrolysis phenomena. These explorations are described in this paper.

  13. Three dimensional numerical simulations of the UPS-292-SC engine

    SciTech Connect (OSTI)

    O'Rourke, P.J.; Amsden, A.A.

    1987-01-01

    We present and analyze three-dimensional calculations of the spray, mixing and combustion in the UPS-292 stratified charge engine for three different operating conditions, corresponding to overall air-fuel ratios between 22.4 and 61.0. The numerical calculations are performed with KIVA, a multidimensional arbitrary-mesh, finite-difference hydrodynamics program for internal combustion engine applications. The calculations use a mesh of 10,000 computational cells, which conform to the shape of the piston bowl and cylinder and move to follow piston motion. Each operating condition is calculated from intake valve closure at 118/sup 0/ BTDC to 90/sup 0/ ATDC and requires approximately three hours of CRAY-XMP computer time.

  14. The implementation of substation automation coordinated with numerical protection relaying

    SciTech Connect (OSTI)

    Welie, G. van; Carolin, T.

    1994-12-31

    During 1987 Eskom embarked on a process of defining user requirements in the area of substation control. This ultimately resulted in a project being established for the procurement and development of a new generation of substation control equipment. At the same time it was decided to establish a new generation of protection schemes for transmission substations, based on numerical protection relays. From the outset, a high degree of coordination was planned between the substation control and protection equipment. Development contracts were placed with suppliers during late 1990 for the protection schemes and during early 1991 for the substation control equipment. These contracts are nearing completion and the first large installations will commence during 1994. The Transmission Group has committed to employing this new technology in all new substations and all substations to be refurbished. This paper discusses the concept of coordinated substation control and protection and gives insight into implementation issues and functional compromises which had to be made to meet project deadlines.

  15. Rapid installation of numerical models in multiple parent codes

    SciTech Connect (OSTI)

    Brannon, R.M.; Wong, M.K.

    1996-10-01

    A set of``model interface guidelines``, called MIG, is offered as a means to more rapidly install numerical models (such as stress-strain laws) into any parent code (hydrocode, finite element code, etc.) without having to modify the model subroutines. The model developer (who creates the model package in compliance with the guidelines) specifies the model`s input and storage requirements in a standardized way. For portability, database management (such as saving user inputs and field variables) is handled by the parent code. To date, NUG has proved viable in beta installations of several diverse models in vectorized and parallel codes written in different computer languages. A NUG-compliant model can be installed in different codes without modifying the model`s subroutines. By maintaining one model for many codes, MIG facilitates code-to-code comparisons and reduces duplication of effort potentially reducing the cost of installing and sharing models.

  16. U.S. Residential Miscellaneous Refrigeration Products: Results from Amazon Mechanical Turk Surveys

    SciTech Connect (OSTI)

    Greenblatt, Jeffery B.; Young, Scott J.; Yang, Hung-Chia; Long, Timothy; Beraki, Bereket; Price, Sarah K.; Pratt, Stacy; Willem, Henry; Desroches, Louis-Benoit

    2013-11-14

    Amazon Mechanical Turk was used, for the first time, to collect statistically representative survey data from U.S. households on the presence, number, type and usage of refrigerators, freezers, and various “miscellaneous” refrigeration products (wine/beverage coolers, residential icemakers and non-vapor compression refrigerators and freezers), along with household and demographic information. Such products have been poorly studied to date, with almost no information available about shipments, stocks, capacities, energy use, etc. A total of 9,981 clean survey responses were obtained from five distinct surveys deployed in 2012. General refrigeration product survey responses were weighted to demographics in the U.S. Energy Information Administration’s Residential Energy Consumption Survey 2009 dataset. Miscellaneous refrigeration product survey responses were weighted according to demographics of product ownership found in the general refrigeration product surveys. Model number matching for a portion of miscellaneous refrigeration product responses allowed validation of refrigeration product characteristics, which enabled more accurate estimates of the penetrations of these products in U.S. households. We estimated that there were 12.3±1.0 million wine/beverage coolers, 5.5(–3.5,+3.2) million residential icemakers and 4.4(–2.7,+2.3) million non-vapor compression refrigerators in U.S. households in 2012. (All numerical results are expressed with ranges indicating the 95% confidence interval.) No evidence was found for the existence of non-vapor compression freezers. Moreover, we found that 15% of wine/beverage coolers used vapor compression cooling technology, while 85% used thermoelectric cooling technology, with the vast majority of thermoelectric units having capacities of less than 30 wine bottles (approximately 3.5 cubic feet). No evidence was found for the existence of wine/beverage coolers with absorption cooling technology. Additionally, we estimated

  17. Numerical analysis of modified Central Solenoid insert design

    DOE PAGES-Beta [OSTI]

    Khodak, Andrei; Martovetsky, Nicolai; Smirnov, Aleksandre; Titus, Peter

    2015-06-21

    The United States ITER Project Office (USIPO) is responsible for fabrication of the Central Solenoid (CS) for ITER project. The ITER machine is currently under construction by seven parties in Cadarache, France. The CS Insert (CSI) project should provide a verification of the conductor performance in relevant conditions of temperature, field, currents and mechanical strain. The US IPO designed the CSI that will be tested at the Central Solenoid Model Coil (CSMC) Test Facility at JAEA, Naka. To validate the modified design we performed three-dimensional numerical simulations using coupled solver for simultaneous structural, thermal and electromagnetic analysis. Thermal and electromagneticmore » simulations supported structural calculations providing necessary loads and strains. According to current analysis design of the modified coil satisfies ITER magnet structural design criteria for the following conditions: (1) room temperature, no current, (2) temperature 4K, no current, (3) temperature 4K, current 60 kA direct charge, and (4) temperature 4K, current 60 kA reverse charge. Fatigue life assessment analysis is performed for the alternating conditions of: temperature 4K, no current, and temperature 4K, current 45 kA direct charge. Results of fatigue analysis show that parts of the coil assembly can be qualified for up to 1 million cycles. Distributions of the Current Sharing Temperature (TCS) in the superconductor were obtained from numerical results using parameterization of the critical surface in the form similar to that proposed for ITER. Lastly, special ADPL scripts were developed for ANSYS allowing one-dimensional representation of TCS along the cable, as well as three-dimensional fields of TCS in superconductor material. Published by Elsevier B.V.« less

  18. Numerical analysis of modified Central Solenoid insert design

    SciTech Connect (OSTI)

    Khodak, Andrei; Martovetsky, Nicolai; Smirnov, Aleksandre; Titus, Peter

    2015-06-21

    The United States ITER Project Office (USIPO) is responsible for fabrication of the Central Solenoid (CS) for ITER project. The ITER machine is currently under construction by seven parties in Cadarache, France. The CS Insert (CSI) project should provide a verification of the conductor performance in relevant conditions of temperature, field, currents and mechanical strain. The US IPO designed the CSI that will be tested at the Central Solenoid Model Coil (CSMC) Test Facility at JAEA, Naka. To validate the modified design we performed three-dimensional numerical simulations using coupled solver for simultaneous structural, thermal and electromagnetic analysis. Thermal and electromagnetic simulations supported structural calculations providing necessary loads and strains. According to current analysis design of the modified coil satisfies ITER magnet structural design criteria for the following conditions: (1) room temperature, no current, (2) temperature 4K, no current, (3) temperature 4K, current 60 kA direct charge, and (4) temperature 4K, current 60 kA reverse charge. Fatigue life assessment analysis is performed for the alternating conditions of: temperature 4K, no current, and temperature 4K, current 45 kA direct charge. Results of fatigue analysis show that parts of the coil assembly can be qualified for up to 1 million cycles. Distributions of the Current Sharing Temperature (TCS) in the superconductor were obtained from numerical results using parameterization of the critical surface in the form similar to that proposed for ITER. Lastly, special ADPL scripts were developed for ANSYS allowing one-dimensional representation of TCS along the cable, as well as three-dimensional fields of TCS in superconductor material. Published by Elsevier B.V.

  19. Radiological Assessment Survey of the Vance road Facility Source Vault Building Materials, Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    J. R. Morton

    2000-09-01

    From the 1950s, the Vance Road laboratory was the site of extensive nuclear medical research and involved the used of numerous radionuclides. These nuclides were stored in a source vault stored on the first floor of the facility. Nuclear medical research is no longer conducted in this facility, and the source vault was remediated in preparation for converting the area to office space and general use. The Environmental Survey and Site Assessment Program (ESSAP) of ORISE performed a radiological assessment survey of the source vault and its associated miscellaneous building materials and laboratory equipment in preparation for the conversion to general use space.

  20. Utility FGD survey, Janurary--December 1988

    SciTech Connect (OSTI)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. )

    1991-09-01

    The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW. 2 figs., 9 tabs.

  1. Utility FGD survey, January--December 1988

    SciTech Connect (OSTI)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. )

    1991-09-01

    The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, systems designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW.

  2. Utility FGD survey, January--December 1988

    SciTech Connect (OSTI)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. )

    1991-09-01

    The Utility FGD Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company. Simplified process flow diagrams of FGD systems, definitions, and a glossary of terms are attached to the report. Current data for domestic FGD systems show systems in operation, systems under construction, and systems planned. The current total FGD-controlled capacity in the United States is 67,091 MW.

  3. NUG2013UserSurvey.pptx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2 NERSC User Survey Results --- 1 --- NUG 2 013 2 Response Profile 481 r espondents ( + 7 1 J GI o nly) * 6 7.6% " big u ser" r esponse r ate * 3 6.2% " medium u ser" r esponse r ate * 1 1.8% o verall r esponse r ate BER HEP Respondants b y R ole Pis --- 2 5.4% Proxies --- 15.2% Users --- 59.5% Respondants b y O ffice ASCR --- 7 .9% BER --- 2 0.6% BES --- 34.5% FES --- 1 3.5% HEP --- 1 4.6% NP --- 8 .3% BES FES NP ASCR HEP BER PIs Users Proxies 2012 Survey Question &

  4. Oceanic Trace Gases Numeric Data Packages from the Carbon Dioxide Information Analysis Center (CDIAC)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    CDIAC products include numeric data packages, publications, trend data, atlases, models, etc. and can be searched for by subject area, keywords, authors, product numbers, time periods, collection sites, spatial references, etc. Most data sets or packages, many with numerous data files, are free to download from CDIAC's ftp area. The collection provides access to the Oceanographic Numeric Data Packages (NDPs).

  5. Office of Survey Development and Statistical Integration

    Gasoline and Diesel Fuel Update

    Steve Harvey April 27, 2011 | Washington, D.C. Tough Choices in U.S. EIA's Data Programs Agenda * Office of Oil, Gas, and Coal Supply Statistics * Office of Petroleum and Biofuels Statistics * Office of Electricity, Renewables, and Uranium Statistics * Office of Energy Consumption and Efficiency Statistics * Office of Survey Development and Statistical Integration 2 Presenter name, Presentation location, Presentation date Coal Data Collection Program 3 James Kendell Washington, DC, April 27,

  6. Autonomous mobile robot for radiologic surveys

    DOE Patents [OSTI]

    Dudar, Aed M.; Wagner, David G.; Teese, Gregory D.

    1994-01-01

    An apparatus for conducting radiologic surveys. The apparatus comprises in the main a robot capable of following a preprogrammed path through an area, a radiation monitor adapted to receive input from a radiation detector assembly, ultrasonic transducers for navigation and collision avoidance, and an on-board computer system including an integrator for interfacing the radiation monitor and the robot. Front and rear bumpers are attached to the robot by bumper mounts. The robot may be equipped with memory boards for the collection and storage of radiation survey information. The on-board computer system is connected to a remote host computer via a UHF radio link. The apparatus is powered by a rechargeable 24-volt DC battery, and is stored at a docking station when not in use and/or for recharging. A remote host computer contains a stored database defining paths between points in the area where the robot is to operate, including but not limited to the locations of walls, doors, stationary furniture and equipment, and sonic markers if used. When a program consisting of a series of paths is downloaded to the on-board computer system, the robot conducts a floor survey autonomously at any preselected rate. When the radiation monitor detects contamination, the robot resurveys the area at reduced speed and resumes its preprogrammed path if the contamination is not confirmed. If the contamination is confirmed, the robot stops and sounds an alarm.

  7. Autonomous mobile robot for radiologic surveys

    DOE Patents [OSTI]

    Dudar, A.M.; Wagner, D.G.; Teese, G.D.

    1994-06-28

    An apparatus is described for conducting radiologic surveys. The apparatus comprises in the main a robot capable of following a preprogrammed path through an area, a radiation monitor adapted to receive input from a radiation detector assembly, ultrasonic transducers for navigation and collision avoidance, and an on-board computer system including an integrator for interfacing the radiation monitor and the robot. Front and rear bumpers are attached to the robot by bumper mounts. The robot may be equipped with memory boards for the collection and storage of radiation survey information. The on-board computer system is connected to a remote host computer via a UHF radio link. The apparatus is powered by a rechargeable 24-volt DC battery, and is stored at a docking station when not in use and/or for recharging. A remote host computer contains a stored database defining paths between points in the area where the robot is to operate, including but not limited to the locations of walls, doors, stationary furniture and equipment, and sonic markers if used. When a program consisting of a series of paths is downloaded to the on-board computer system, the robot conducts a floor survey autonomously at any preselected rate. When the radiation monitor detects contamination, the robot resurveys the area at reduced speed and resumes its preprogrammed path if the contamination is not confirmed. If the contamination is confirmed, the robot stops and sounds an alarm. 5 figures.

  8. Radiological survey of San Diego Bay

    SciTech Connect (OSTI)

    Semler, M.O.; Blanchard, R.L.

    1989-06-01

    A radiological survey of three sites in San Diego Bay provided the basis for the following conclusions: 1. Small quantities of Co-60 (0.02-0.05 pCi/g) are present in the bottom sediments in some areas of the harbor at the Submarine Base. Most, if not all, of the Co-60 contamination present probably originated prior to the earlier 1967 survey that reported Co-60 levels as much as 300 times larger than those observed in this study. The highest Co-60 concentration measured is now less than one percent of the normal background radioactivity in harbor sediment samples. 2. No tritium or gamma-ray emitters, other than trace amounts of those occurring naturally, were detected in surface water from the dock areas or in nearby drinking water supplies. 3. Only radionuclides of natural origin and trace amounts of Cs-137 from fallout of previous nuclear weapons tests were detected in samples of kelp, algae, and fish taken from the harbor at the Submarine Base. 4. Gamma-ray surveys of the harbors near the docking areas and along shorelines and beaches near the shipyards failed to detect any exposure rates above background. 3 refs., 4 figs., 3 tabs.

  9. AGES: THE AGN AND GALAXY EVOLUTION SURVEY

    SciTech Connect (OSTI)

    Kochanek, C. S.; Eisenstein, D. J.; Caldwell, N.; Jones, C.; Murray, S. S.; Forman, W. R.; Green, P.; Cool, R. J.; Assef, R. J.; Eisenhardt, P.; Stern, D.; Jannuzi, B. T.; Dey, A.; Brown, M. J. I.; Gonzalez, A. H.

    2012-05-01

    The AGN and Galaxy Evolution Survey (AGES) is a redshift survey covering, in its standard fields, 7.7 deg{sup 2} of the Booetes field of the NOAO Deep Wide-Field Survey. The final sample consists of 23,745 redshifts. There are well-defined galaxy samples in 10 bands (the B{sub W} , R, I, J, K, IRAC 3.6, 4.5, 5.8, and 8.0 {mu}m, and MIPS 24 {mu}m bands) to a limiting magnitude of I < 20 mag for spectroscopy. For these galaxies, we obtained 18,163 redshifts from a sample of 35,200 galaxies, where random sparse sampling was used to define statistically complete sub-samples in all 10 photometric bands. The median galaxy redshift is 0.31, and 90% of the redshifts are in the range 0.085 < z < 0.66. Active galactic nuclei (AGNs) were selected as radio, X-ray, IRAC mid-IR, and MIPS 24 {mu}m sources to fainter limiting magnitudes (I < 22.5 mag for point sources). Redshifts were obtained for 4764 quasars and galaxies with AGN signatures, with 2926, 1718, 605, 119, and 13 above redshifts of 0.5, 1, 2, 3, and 4, respectively. We detail all the AGES selection procedures and present the complete spectroscopic redshift catalogs and spectral energy distribution decompositions. Photometric redshift estimates are provided for all sources in the AGES samples.

  10. The FIRST-2MASS Red Quasar Survey

    SciTech Connect (OSTI)

    Glikman, E; Helfand, D J; White, R L; Becker, R H; Gregg, M D; Lacy, M

    2007-06-28

    Combining radio observations with optical and infrared color selection--demonstrated in our pilot study to be an efficient selection algorithm for finding red quasars--we have obtained optical and infrared spectroscopy for 120 objects in a complete sample of 156 candidates from a sky area of 2716 square degrees. Consistent with our initial results, we find our selection criteria--J-K > 1.7,R-K > 4.0--yield a {approx} 50% success rate for discovering quasars substantially redder than those found in optical surveys. Comparison with UVX- and optical color-selected samples shows that {approx}> 10% of the quasars are missed in a magnitude-limited survey. Simultaneous two-frequency radio observations for part of the sample indicate that a synchrotron continuum component is ruled out as a significant contributor to reddening the quasars spectra. We go on to estimate extinctions for our objects assuming their red colors are caused by dust. Continuum fits and Balmer decrements suggest E(B-V) values ranging from near zero to 2.5 magnitudes. Correcting the K-band magnitudes for these extinctions, we find that for K {le} 14.0, red quasars make up between 25% and 60% of the underlying quasar population; owing to the incompleteness of the 2MASS survey at fainter K-band magnitudes, we can only set a lower limit to the radio-detected red quasar population of > 20-30%.

  11. The Dark Energy Survey Camera (DECam)

    SciTech Connect (OSTI)

    Diehl, H.Thomas; /Fermilab

    2011-09-09

    The Dark Energy Survey (DES) is a next generation optical survey aimed at understanding the expansion rate of the Universe using four complementary methods: weak gravitational lensing, galaxy cluster counts, baryon acoustic oscillations, and Type Ia supernovae. To perform the survey, the DES Collaboration is building the Dark Energy Camera (DECam), a 3 square degree, 570 Megapixel CCD camera that will be mounted at the prime focus of the Blanco 4-meter telescope at the Cerro Tololo Inter-American Observatory. CCD production has finished, yielding roughly twice the required 62 2k x 4k detectors. The construction of DECam is nearly finished. Integration and commissioning on a 'telescope simulator' of the major hardware and software components, except for the optics, recently concluded at Fermilab. Final assembly of the optical corrector has started at University College, London. Some components have already been received at CTIO. 'First-light' will be sometime in 2012. This oral presentation concentrates on the technical challenges involved in building DECam (and how we overcame them), and the present status of the instrument.

  12. Table 2. Percent of Households with Vehicles, Selected Survey...

    U.S. Energy Information Administration (EIA) (indexed site)

    Percent of Households with Vehicles, Selected Survey Years " ,"Survey Years" ,1983,1985,1988,1991,1994,2001 "Total",85.5450237,89.00343643,88.75545852,89.42917548,87.25590956,92.08...

  13. NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Survey Shows Dramatic Improvement in B100 Biodiesel Quality April 15, 2013 The latest national survey of 100% biodiesel (B100) "blend stock" samples by the U.S. Department of ...

  14. Ground Gravity Survey At Neal Hot Springs Geothermal Area (U...

    Open Energy Information (Open El) [EERE & EIA]

    survey was completed by MWH Geo-Surveys. Interpretations were made by creating a 3D density inversion map. Gravity and magnetic data were used in siting the first production...

  15. Category:2-M Probe Survey | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    2-M Probe Survey Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Geothermalpower.jpg Looking for the 2-M Probe Survey page? For detailed information on 2-M Probe...

  16. Department of Energy Earned Value Management Survey Results

    Energy.gov [DOE]

    Humphreys & Associates, Inc. (H&A) conducted a survey of Department of Energy (DOE) Earned Value Management (EVM) and Project Management (PM) stakeholders.  Two versions of the survey were...

  17. Report of Survey of Oak Ridge Isotope Enrichment (Calutron) Facility...

    Office of Environmental Management (EM)

    Report of Survey of Oak Ridge Isotope Enrichment (Calutron) Facility Building 9204-3 Report of Survey of Oak Ridge Isotope Enrichment (Calutron) Facility Building 9204-3 The ...

  18. "Table 11. Fuel Economy, Selected Survey Years (Miles Per Gallon...

    U.S. Energy Information Administration (EIA) (indexed site)

    Fuel Economy, Selected Survey Years (Miles Per Gallon)" ,"Survey Years" ,1983,1985,1988,1991,1994,2001 "Total",15.1,16.1,18.3,19.3,19.8,20.2 "Household Characteristics" "Census...

  19. Findings from Survey Administered to Weatherization Training Centers

    SciTech Connect (OSTI)

    Conlon, Brian; Tonn, Bruce Edward

    2015-03-01

    This report summarizes results of a survey administered to directors of weatherization training centers that receive funding from the U.S. Department of Energy. The survey presents results related to questions on training offered and future plans.

  20. 2-M Probe Survey At Chena Geothermal Area (Wescott & Turner,...

    Open Energy Information (Open El) [EERE & EIA]

    Basis Masters thesis Norma Biggar, Geophysical Institute University of Alaska Notes Ground temperature survey performed with a 0.5 m probe. This survey yielded a SE-trending...

  1. RADIOLOGICAL SURVEY OF A PORTION OF PROPERTY OWNED BY MODERN...

    Office of Legacy Management (LM)

    for the DEPARTMENT OF ENERGY as part of the Formerly ... Figure Page 1 Plan view of Former AEC Storage Site Showing ... Survey Techniques A survey grid system (100-ft spacing) was ...

  2. Aeromagnetic Survey At Chena Geothermal Area (Kolker, 2008) ...

    Open Energy Information (Open El) [EERE & EIA]

    Phase I) Notes Fugro, Inc. performed an airborne geophysical survey using the DIGHEM (Digital Helicopter ElectroMagnetics) aircraft over a 937 km2 survey grid. Total field, nT...

  3. Vehicle Technologies Office: Workplace Charging Challenge 2015 Annual Survey Webinar

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar provides an update on the Workplace Charging Challenge initiative, describes the survey, discusses why the Survey input is essential, and walks through the log-in and submission process.

  4. POLICY GUIDANCE MEMORANDUM #16 OPM Managers' Satisfaction Survey |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 6 OPM Managers' Satisfaction Survey POLICY GUIDANCE MEMORANDUM #16 OPM Managers' Satisfaction Survey This memorandum provides guidance on how to implement the requirement for hiring managers to complete the OPM Managers' Satisfaction Survey before Servicing Human Resources Offices (SHROs) can make an official offer to any job selectee. POLICY GUIDANCE MEMORANDUM #16 OPM Managers' Satisfaction Survey (114.07 KB) Responsible Contacts Jennifer Ackerman Director, Human

  5. Aeromagnetic Survey At Raft River Geothermal Area (1981) | Open...

    Open Energy Information (Open El) [EERE & EIA]

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Raft River Geothermal Area (1981) Exploration Activity Details Location Raft River...

  6. Aeromagnetic Survey At Raft River Geothermal Area (1978) | Open...

    Open Energy Information (Open El) [EERE & EIA]

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Raft River Geothermal Area (1978) Exploration Activity Details Location Raft River...

  7. DOE Initiative to Improve PM and EVM, Integration Survey Results |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration Survey Results Karen Urschel, Humphreys & Associates March 24, 2016 Presentation (563.59 KB) Key Resources Internal DOE Tools PMCDP EVMS PARS IIe FPD Resource Center PM Newsletter Forms and Templates More Documents & Publications Department of Energy Earned Value Management Survey Results

  8. Aeromagnetic Survey At Coso Geothermal Area (1977) | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Home Exploration Activity: Aeromagnetic Survey At Coso Geothermal Area (1977) Exploration Activity Details Location Coso Geothermal Area Exploration Technique...

  9. Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Information (Open El) [EERE & EIA]

    Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Aeromagnetic Survey Activity...

  10. 2010 - Federal Viewpoint Survey Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 - Federal Viewpoint Survey Reports 2010 - Federal Viewpoint Survey Reports The 2010 Trend report provides summary results for the Department or Energy's portion of the Federal Employee Viewpoint Survey. The report also shows how the 2010 results compare to the results of previous years. Department of Energy: 2010 Federal Employee Viewpoint Survey Trend Report (253.09 KB) Responsible Contacts Thomasina Mathews PROGRAM MANAGER E-mail thomasina.mathews@hq.doe.gov Phone 202-586-2657 More Documents

  11. 2011 - Federal Viewpoint Survey Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 - Federal Viewpoint Survey Reports 2011 - Federal Viewpoint Survey Reports The following highlight report focuses on the Department of Energy's areas of strengths and challenges, identifies areas of progress and opportunities for improvement. The Departments 2011 results are compared with both the 2011 Governmentwide results and our 2010 survey results. The Trend report provides summary results for the Department or Energy's portion of the Federal Employee Viewpoint Survey. The report also

  12. 2012 - Federal Viewpoint Survey Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2 - Federal Viewpoint Survey Reports 2012 - Federal Viewpoint Survey Reports The following highlight report focuses on the Department of Energy's areas of strengths and challenges, identifies areas of progress and opportunities for improvement. The Departments 2012 results are compared with both the 2012 Government wide results and our 2011 survey results. 2012 Federal Employee Viewpoint Survey Results: Agency Management Report (10.75 MB) Responsible Contacts Thomasina Mathews PROGRAM MANAGER

  13. 2012 Independent Communication and Outreach Stakeholder Satisfaction Survey

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 2 Independent Communication and Outreach Stakeholder Satisfaction Survey 2012 Independent Communication and Outreach Stakeholder Satisfaction Survey DOE-LM periodically surveys its stakeholders to collect their feedback on DOE-LM performance at both a local and national level. The first customer satisfaction survey was conducted in 2005 and focused primarily on DOE-LM's "business lines": records management; site management; personal/real property; and

  14. Health Physics Enrollments and Degrees Survey, 2013 Data

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SURVEY UNIVERSE The survey includes degrees granted between September 1, 2012 and August 31, 2013. Enrollment information refers to the fall term 2013. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program

  15. Health Physics Enrollments and Degrees Survey, 2014 Data

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SURVEY UNIVERSE The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program

  16. Pacific Northwest residential energy survey. Volume 2. Technical appendix

    SciTech Connect (OSTI)

    1980-07-01

    The technical appendix presents the technical aspects of the Pacific Northwest Residential Energy Survey: the survey questionnaire, exhibit cards, instructions for interviewers, and a description of the survey plan. A description of the sample plan (method used to determine which 4000 households) is given. (MCW)

  17. 2001 FEMP Customer Survey Report (Main Report) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Main Report) 2001 FEMP Customer Survey Report (Main Report) This summary presents the key findings and recommendations from the 2001 FEMP customer survey. The key findings presented in this summary are a condensed presentation of the more detailed findings presented in each of the chapters. Study Report (2.32 MB) More Documents & Publications 2001 FEMP Customer Survey Report (Summary

  18. DC Survey 2013 | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Management / Aerial Measuring System DC Survey 2013 DC Background Survey (.zip) DC 2013 survey Related Topics ams Emergency Response Related News NNSA stays prepared with world-class response units Department of Energy's chief risk officer visits Nevada National Security Site NNSA sites prepared for disasters using real-time response management system NNSA emergency response assets highlighted NNSA displays helicopter in Baltimore

  19. Numerical integration for ab initio many-electron self energy calculations within the GW approximation

    SciTech Connect (OSTI)

    Liu, Fang; Lin, Lin; Vigil-Fowler, Derek; Lischner, Johannes; Kemper, Alexander F.; Sharifzadeh, Sahar; Jornada, Felipe H. da; Deslippe, Jack; Yang, Chao; and others

    2015-04-01

    We present a numerical integration scheme for evaluating the convolution of a Green's function with a screened Coulomb potential on the real axis in the GW approximation of the self energy. Our scheme takes the zero broadening limit in Green's function first, replaces the numerator of the integrand with a piecewise polynomial approximation, and performs principal value integration on subintervals analytically. We give the error bound of our numerical integration scheme and show by numerical examples that it is more reliable and accurate than the standard quadrature rules such as the composite trapezoidal rule. We also discuss the benefit of using different self energy expressions to perform the numerical convolution at different frequencies.

  20. NUMERICAL STUDY OF THE VISHNIAC INSTABILITY IN SUPERNOVA REMNANTS

    SciTech Connect (OSTI)

    Michaut, C.; Cavet, C.; Bouquet, S. E.; Roy, F.; Nguyen, H. C.

    2012-11-10

    The Vishniac instability is thought to explain the complex structure of radiative supernova remnants in their Pressure-Driven Thin Shell (PDTS) phase after a blast wave (BW) has propagated from a central explosion. In this paper, the propagation of the BW and the evolution of the PDTS stage are studied numerically with the two-dimensional (2D) code HYDRO-MUSCL for a finite-thickness shell expanding in the interstellar medium (ISM). Special attention is paid to the adiabatic index, {gamma}, and three distinct values are taken for the cavity ({gamma}{sub 1}), the shell ({gamma}{sub 2}), and the ISM ({gamma}{sub 3}) with the condition {gamma}{sub 2} < {gamma}{sub 1}, {gamma}{sub 3}. This low value of {gamma}{sub 2} accounts for the high density in the shell achieved by a strong radiative cooling. Once the spherical background flow is obtained, the evolution of a 2D-axisymmetric perturbation is computed from the linear to the nonlinear regime. The overstable mechanism, previously demonstrated theoretically by E. T. Vishniac in 1983, is recovered numerically in the linear stage and is expected to produce and enhance anisotropies and clumps on the shock front, leading to the disruption of the shell in the nonlinear phase. The period of the increasing oscillations and the growth rate of the instability are derived from several points of view (the position of the perturbed shock front, mass fluxes along the shell, and density maps), and the most unstable mode differing from the value given by Vishniac is computed. In addition, the influence of several parameters (the Mach number, amplitude and wavelength of the perturbation, and adiabatic index) is examined and for wavelengths that are large enough compared to the shell thickness, the same conclusion arises: in the late stage of the evolution of the radiative supernova remnant, the instability is dampened and the angular initial deformation of the shock front is smoothed while the mass density becomes uniform with the

  1. Oh, the (Energy-Related) Stories I Have Heard...

    Energy.gov [DOE]

    I don't have an interesting tidbit, video, or page to link to today, so I thought I would share a few things I've heard people say about saving energy.

  2. EO 13212: Actions To Expedite Energy-Related Projects

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vol. 66, No. 99 Tuesday, May 22, 2001 Presidential Documents Executive Order ... Administration, Office of Management and Budget, Council of Economic Advisers, Domestic ...

  3. DOE - Fossil Energy: DOE's Fossil Energy-related education material...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Fellowships - Technical Career Intern Program - Energy Lessons - University Research - STAY CONNECTED Join Us on Facebook Follow Us on Twitter Sign Up for NewsAlerts Subscribe to...

  4. Clark Atlanta Universities (CAU) Energy Related Research Capabilities...

    Energy Savers

    Building and International Trade Center HYDROGEN AND FUEL CELL EDUCATION AT CALIFORNIA STATE UNIVERSITY, LOS ANGELES GATE Center for Automotive Fuel Cell Systems at Virginia Tech

  5. Laboratory for Energy-Related Health Research Compliance Order...

    Office of Environmental Management (EM)

    Parties DOE; State of California Environmental Protection Agency (Department of Toxic Substances Control) Date 1061995 SCOPE * Require compliance by the DOE with a Site...

  6. EO 13212: Actions To Expedite Energy-Related Projects

    Energy.gov [DOE]

    The increased production and transmission of energy in a safe and environmentally sound manner is essential to the well-being of the American people. In general, it is the policy of this...

  7. Nuclear energy related capabilities at Sandia National Laboratories

    SciTech Connect (OSTI)

    Pickering, Susan Y.

    2014-02-01

    Sandia National Laboratories' technology solutions are depended on to solve national and global threats to peace and freedom. Through science and technology, people, infrastructure, and partnerships, part of Sandia's mission is to meet the national needs in the areas of energy, climate and infrastructure security. Within this mission to ensure clean, abundant, and affordable energy and water is the Nuclear Energy and Fuel Cycle Programs. The Nuclear Energy and Fuel Cycle Programs have a broad range of capabilities, with both physical facilities and intellectual expertise. These resources are brought to bear upon the key scientific and engineering challenges facing the nation and can be made available to address the research needs of others. Sandia can support the safe, secure, reliable, and sustainable use of nuclear power worldwide by incorporating state-of-the-art technologies in safety, security, nonproliferation, transportation, modeling, repository science, and system demonstrations.

  8. Executive Order 13212 - Actions To Expedite Energy-Related Projects...

    Energy Savers

    The increased production and transmission of energy in a safe and environmentally sound manner is essential to the well-being of the American people. In general, it is the policy ...

  9. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L.; Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E.

    1992-09-01

    DOE`s Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA`s data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  10. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L. ); Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E. )

    1992-09-01

    DOE's Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA's data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  11. Grameen Bank`s experience with energy related microenterprise development

    SciTech Connect (OSTI)

    Barua, D.C.

    1997-12-01

    Increased population and growth of industry have resulted in greater demand for energy worldwide. Most of this energy is derived from fossil fuel (coal, gas, oil and nuclear) which will soon be depleted. In this context the need for developing renewable sources of energy has taken on a greater sense of importance and urgency. Over the years significant technological advances have been made in the area of renewable energies especially in the field of solar photovoltaics (PV), wind energy and bio-gas technology. In addition, for remote rural areas where there exists no infrastructure for conventional energy supply, these forms of decentralized alternative energy systems will be far more adaptable and well suited. Grameen Shakti (Energy) is an addition to the family of companies of Grameen Bank, to promote and supply renewable energy sources to rural households. GS, a not-for-profit company, expects not only to supply renewable energy services, but also to create employment and income generation opportunities in rural Bangladesh. GS will focus on supply, marketing, sales, testing and development of renewable energy systems of solar pv, biogas, wind turbines and windpumps.

  12. Operating Experience Level 3, Frequent Hazardous Electrical Energy Related Events

    Energy.gov [DOE]

    This Operating Experience Level 3 (OE-3) document provides information about a safety concern related to frequent hazardous electrical energy events during work at Department of Energy (DOE) facilities.

  13. Laboratory for Energy-Related Health Research Compliance Order...

    Office of Environmental Management (EM)

    ... that he or she is fully authorized to enter into the terms and conditions of this Order and to ... Go to Selected EM Cleanup and Compliance Orders EM HOME | DOE HOME | SEARCH | ...

  14. Trends in energy use in commercial buildings -- Sixteen years of EIA's commercial buildings energy consumption survey

    SciTech Connect (OSTI)

    Davis, J.; Swenson, A.

    1998-07-01

    The Commercial Buildings Energy Consumption Survey (CBECS) collects basic statistical information on energy consumption and energy-related characteristics of commercial buildings in the US. The first CBECS was conducted in 1979 and the most recent was completed in 1995. Over that period, the number of commercial bindings and total amount of floorspace increased, total consumption remained flat, and total energy intensity declined. By 1995, there were 4.6 million commercial buildings and 58.8 billion square feet of floorspace. The buildings consumed a total of 5.3 quadrillion Btu (site energy), with a total intensity of 90.5 thousand Btu per square foot per year. Electricity consumption exceeded natural gas consumption (2.6 quadrillion and 1.9 quadrillion Btu, respectively). In 1995, the two major users of energy were space heating (1.7 quadrillion Btu) and lighting (1.2 quadrillion Btu). Over the period 1979 to 1995, natural gas intensity declined from 71.4 thousand to 51.0 thousand Btu per square foot per year. Electricity intensity did not show a similar decline (44.2 thousand Btu per square foot in 1979 and 45.7 thousand Btu per square foot in 1995). Two types of commercial buildings, office buildings and mercantile and service buildings, were the largest consumers of energy in 1995 (2.0 quadrillion Btu, 38% of total consumption). Three building types, health care, food service, and food sales, had significantly higher energy intensities. Buildings constructed since 1970 accounted for half of total consumption and a majority (59%) of total electricity consumption.

  15. Advanced Numerical Methods and Software Approaches for Semiconductor Device Simulation

    DOE PAGES-Beta [OSTI]

    Carey, Graham F.; Pardhanani, A. L.; Bova, S. W.

    2000-01-01

    In this article we concisely present several modern strategies that are applicable to driftdominated carrier transport in higher-order deterministic models such as the driftdiffusion, hydrodynamic, and quantum hydrodynamic systems. The approaches include extensions of “upwind” and artificial dissipation schemes, generalization of the traditional Scharfetter – Gummel approach, Petrov – Galerkin and streamline-upwind Petrov Galerkin (SUPG), “entropy” variables, transformations, least-squares mixed methods and other stabilized Galerkin schemes such as Galerkin least squares and discontinuous Galerkin schemes. The treatment is representative rather than an exhaustive review and several schemes are mentioned only briefly with appropriate reference to the literature. Some of themore » methods have been applied to the semiconductor device problem while others are still in the early stages of development for this class of applications. We have included numerical examples from our recent research tests with some of the methods. A second aspect of the work deals with algorithms that employ unstructured grids in conjunction with adaptive refinement strategies. The full benefits of such approaches have not yet been developed in this application area and we emphasize the need for further work on analysis, data structures and software to support adaptivity. Finally, we briefly consider some aspects of software frameworks. These include dial-an-operator approaches such as that used in the industrial simulator PROPHET, and object-oriented software support such as those in the SANDIA National Laboratory framework SIERRA.« less

  16. Numerical simulation of plasma heating of a composite powder particle

    SciTech Connect (OSTI)

    Demetriou, M.D.; Lavine, A.S.; Ghoniem, N.M.

    1999-07-01

    The use of fine composite powder particles (composed of a ceramic core and a metallic coating) in plasma spraying processes is desirable in developing thin film coatings that possess high abrasion as well as high fracture resistance. Quantitative knowledge of the thermal behavior of a composite particle in a plasma beam is essential in optimizing the process variables to achieve uniform melting of the coating material. In this work, a numerical model is developed to analyze the in-flight thermal behavior of a spherically symmetric WC-Co composite particle travelling in an argon arc-jet DC plasma under strongly unsteady plasma conditions. The model gives quantitative as well as qualitative information about the thermal response of the heated particle. The important features that are addressed are the temperature response of the particle; the history of the location of the melting and vaporization fronts; and the physical state of the particle at the end of its flight. For the conditions investigated, it was determined that the internal conduction resistance is negligible as compared to the net external resistance. However, the presence of the ceramic base was found to affect the transient heating process since its content in the particle composition determines the time constant of the process. Another interesting observation is that proper selection of the particle injection speed and injection location can be effective means for optimizing the heating process and achieving uniform melting of the coating material.

  17. Comparison of numerical models of a pyrotechnic device

    SciTech Connect (OSTI)

    Pierce, K.G.

    1986-01-01

    The predictions of two numerical models of a hot-wire initiated pyrotechnic device are compared to each other and to experimental results. Both models employ finite difference approximations to the heat diffusion equation in cylindrical coordinates. The temperature dependence of the thermal properties of the pyrotechnic materials and of the bridgewire are modeled. An Arrhenius' model is used to describe the exothermic reaction in the powder. One model employs a single radial coordinate and predicts the radial temperature distribution in the bridgewire and surrounding powder mass. In addition to the radial coordinate, the other model also employs a longitudinal coordinate to predict the temperature distribution parallel to the axis of the bridgewire. The predictions of the two-dimensional model concerning the energy requirements for ignition and the energy losses from the ends of the bridgewire are presented. A comparison of the predictions of the two models and the development of thermal gradients are employed to define the regime where the assumption, in the one-dimensional model, of negligible heat transfer axial to the bridgewire does not lead to significant error. The general problems associated with predicting ignition from a diffusion model are also discussed.

  18. Numerical simulation of linear fiction welding (LFW) processes

    SciTech Connect (OSTI)

    Fratini, L.; La Spisa, D. [University of Palermo-Dept. of Industrial engineering (Italy)

    2011-05-04

    Solid state welding processes are becoming increasingly important due to a large number of advantages related to joining ''unweldable'' materials and in particular light weight alloys. Linear friction welding (LFW) has been used successfully to bond non-axisymmetric components of a range of materials including titanium alloys, steels, aluminum alloys, nickel, copper, and also dissimilar material combinations. The technique is useful in the research of quality of the joints and in reducing costs of components and parts of the aeronautic and automotive industries.LFW involves parts to be welded through the relative reciprocating motion of two components under an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and proper bonding conditions due to both the temperature increase and the local pressure of the two edges to be welded. This paper is a comparative test between the numerical model in two dimensions, i.e. in plane strain conditions, and in three dimensions of a LFW process of AISI1045 steel specimens. It must be observed that the 3D model assures a faithful simulation of the actual threedimensional material flow, even if the two-dimensional simulation computational times are very short, a few hours instead of several ones as the 3D model. The obtained results were compared with experimental values found out in the scientific literature.

  19. Numerical calculation of two-phase turbulent jets

    SciTech Connect (OSTI)

    Saif, A.A.

    1995-05-01

    Two-phase turbulent round jets were numerically simulated using a multidimensional two-phase CFD code based on the two-fluid model. The turbulence phenomena were treated with the standard k-{epsilon} model. It was modified to take into account the additional dissipation of turbulent kinetic energy by the dispersed phase. Within the context of the two-fluid model it is more appropriate and physically justified to treat the diffusion by an interfacial force in the momentum equation. In this work, the diffusion force and the additional dissipation effect by the dispersed phase were modeled starting from the classical turbulent energy spectrum analysis. A cut-off frequency was proposed to decrease the dissipation effect by the dispersed phase when large size particles are introduced in the flow. The cut-off frequency combined with the bubble-induced turbulence effect allows for an increase in turbulence for large particles. Additional care was taken in choosing the right kind of experimental data from the literature so that a good separate effect test was possible for their models. The models predicted the experimental data very closely and they were general enough to predict extreme limit cases: water-bubble and air-droplet jets.

  20. Advances in the numerical modeling of field-reversed configurations

    SciTech Connect (OSTI)

    Belova, Elena V.; Davidson, Ronald C.; Ji, Hantao; Yamada, Masaaki

    2006-05-15

    The field-reversed configuration (FRC) is a compact torus with little or no toroidal magnetic field. A theoretical understanding of the observed FRC equilibrium and stability properties presents significant challenges due to the high plasma beta, plasma flows, large ion gyroradius, and the stochasticity of the particle orbits. Advanced numerical simulations are generally required to describe and understand the detailed behavior of FRC plasmas. Results of such simulations are presented in this paper. It is shown that 3D nonlinear hybrid simulations using the HYM code [E. V. Belova et al., Phys. Plasmas 7, 4996 (2000)] reproduce all major experimentally observed stability properties of elongated (theta-pinch-formed) FRCs. Namely, the scaling of the growth rate of the n=1 tilt mode with the S*/E parameter (S* is the FRC kinetic parameter, E is elongation, and n is toroidal mode number), the nonlinear saturation of the tilt mode, ion toroidal spin-up, and the growth of the n=2 rotational mode have been demonstrated and studied in detail. The HYM code has also been used to study stability properties of FRCs formed by the counterhelicity spheromak merging method. A new stability regime has been found for FRCs with elongation E{approx}1, which requires a close-fitting conducting shell and energetic beam ion stabilization.

  1. DRIVER TO SUPPORT USE OF NUMERICAL SIMULATION TOOLS

    Energy Science and Technology Software Center (OSTI)

    2001-02-13

    UNIPACK is a computer interface that simplifies and enhances the use of numerical simulation tools to design a primary geometry and/or a forming die for a powder compact and/or to design the pressing process used to shape a powder by compaction. More particularly, it is an interface that utilizes predefined generic geometric configurations to simplify the use of finite element method modeling software to simply and more efficiently design: (1) the shape and size amore » powder compact; (2) a forming die to shape a powder compact; and/or (3) the pressing process used to form a powder compact. UNIPACK is a user interface for a predictive model for powder compaction that incorporates unprecedented flexibility to design powder press tooling and powder pressing processes. UNIPACK works with the Sandia National Laboratories (SNL) Engineering Analysis Cide Access System (SEACAS) to generate a finite element (FE) mesh and automatically perform a FE analysis of powder compaction. UNIPACK was developed to allow a non-expert with minimal training to quickly and easily design/construct a variable dimension component or die in real time on a desktop or laptop personal computer.« less

  2. Numeric spectral radiation hydrodynamic calculations of supernova shock breakouts

    SciTech Connect (OSTI)

    Sapir, Nir; Halbertal, Dorri

    2014-12-01

    We present here an efficient numerical scheme for solving the non-relativistic one-dimensional radiation-hydrodynamics equations including inelastic Compton scattering, which is not included in most codes and is crucial for solving problems such as shock breakout. The devised code is applied to the problems of a steady-state planar radiation mediated shock (RMS) and RMS breakout from a stellar envelope. The results are in agreement with those of a previous work on shock breakout, in which Compton equilibrium between matter and radiation was assumed and the 'effective photon' approximation was used to describe the radiation spectrum. In particular, we show that the luminosity and its temporal dependence, the peak temperature at breakout, and the universal shape of the spectral fluence derived in this earlier work are all accurate. Although there is a discrepancy between the spectral calculations and the effective photon approximation due to the inaccuracy of the effective photon approximation estimate of the effective photon production rate, which grows with lower densities and higher velocities, the difference in peak temperature reaches only 30% for the most discrepant cases of fast shocks in blue supergiants. The presented model is exemplified by calculations for supernova 1987A, showing the detailed evolution of the burst spectrum. The incompatibility of the stellar envelope shock breakout model results with observed properties of X-ray flashes (XRFs) and the discrepancy between the predicted and observed rates of XRFs remain unexplained.

  3. PIA - Form EIA-475 A/G Residential Energy Consumption Survey...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PIA ...

  4. Field Survey of Cactus Crater Storage Facility (Runit Dome)

    SciTech Connect (OSTI)

    Douglas Miller, Terence Holland

    2008-10-31

    The US Department of Energy, Office of Health and Safety (DOE/HS-10), requested that National Security Technologies, LLC, Environmental Management directorate (NSTec/EM) perform a field survey of the Cactus Crater Storage Facility (Runit Dome), similar to past surveys conducted at their request. This field survey was conducted in conjunction with a Lawrence Livermore National Laboratory (LLNL) mission on Runit Island in the Enewetak Atoll in the Republic of the Marshall Islands (RMI). The survey was strictly a visual survey, backed up by digital photos and a written description of the current condition.

  5. THE SIMPLE SURVEY: OBSERVATIONS, REDUCTION, AND CATALOG

    SciTech Connect (OSTI)

    Damen, M.; Franx, M.; Taylor, E. N.; Labbe, I.; Van Dokkum, P. G.; Muzzin, A.; Brandt, W. N.; Dickinson, M.; Gawiser, E.; Illingworth, G. D.; Marchesini, D.; Papovich, C.; Rix, H.-W.

    2011-01-20

    We present the Spitzer IRAC/MUSYC Public Legacy Survey in the Extended CDF-South (SIMPLE), which consists of deep IRAC observations covering the {approx}1600 arcmin{sup 2} area surrounding GOODS-S. The limiting magnitudes of the SIMPLE IRAC mosaics typically are 23.8, 23.6, 21.9, and 21.7, at 3.6 {mu}m, 4.5 {mu}m, 5.8 {mu}m, and 8.0 {mu}m, respectively (5{sigma} total point source magnitudes in AB). The SIMPLE IRAC images are combined with the 10' x 15' GOODS IRAC mosaics in the center. We give detailed descriptions of the observations, data reduction, and properties of the final images, as well as the detection and photometry methods used to build a catalog. Using published optical and near-infrared data from the Multiwavelength Survey by Yale-Chile (MUSYC), we construct an IRAC-selected catalog, containing photometry in UBVRIz'JHK, [3.6 {mu}m], [4.5 {mu}m], [5.8 {mu}m], and [8.0 {mu}m]. The catalog contains 43,782 sources with S/N >5 at 3.6 {mu}m, 19,993 of which have 13-band photometry. We compare this catalog to the publicly available MUSYC and FIREWORKS catalogs and discuss the differences. Using a high signal-to-noise sub-sample of 3391 sources with ([3.6] + [4.5])/2 < 21.2, we investigate the star formation rate history of massive galaxies out to z {approx} 1.8. We find that at z {approx} 1.8 at least 30% {+-} 7% of the most massive galaxies (M{sub *} >10{sup 11} M{sub sun}) are passively evolving, in agreement with earlier results from surveys covering less area.

  6. THE GALEX NEARBY YOUNG-STAR SURVEY

    SciTech Connect (OSTI)

    Rodriguez, David R.; Faherty, Jacqueline K.; Zuckerman, B.; Kastner, Joel H.; Bessell, M. S.; Murphy, Simon J.

    2013-09-10

    We describe a method that exploits data from the Galaxy Evolution Explorer (GALEX) ultraviolet and Wide-field Infrared Survey Explorer and Two Micron All Sky Survey infrared source catalogs, combined with proper motions and empirical pre-main sequence isochrones, to identify candidate nearby, young, low-mass stars. Applying our method across the full GALEX-covered sky, we identify 2031 mostly M-type stars that, for an assumed age of 10 (100) Myr, all lie within {approx}150 ({approx}90) pc of Earth. The distribution of M spectral subclasses among these {approx}2000 candidate young stars peaks sharply in the range M3-M4; these subtypes constitute 50% of the sample, consistent with studies of the M star population in the immediate solar neighborhood. We focus on a subset of 58 of these candidate young M stars in the vicinity of the Tucana-Horologium association. Only 20 of these 58 candidates were detected in the ROSAT All-Sky X-ray Survey-reflecting the greater sensitivity of GALEX for the purposes of identifying active nearby, young stars, particularly for stars of type M4 and later. Based on statistical analysis of the kinematics and/or spectroscopic followup of these 58 M stars, we find that 50% (29 stars) indeed have properties consistent with Tuc-Hor membership, while 12 are potential new members of the Columba association, and 2 may be AB Dor moving group members. Hence, {approx}75% of our initial subsample of 58 candidates are likely members of young (age {approx} 10-40 Myr) stellar moving groups within 100 pc, verifying that the stellar color- and kinematics-based selection algorithms described here can be used to efficiently isolate nearby, young, low-mass objects from among the field star population. Future studies will focus on characterizing additional subsamples selected from among this list of candidate nearby, young M stars.

  7. Survey of systolic arrays for signal processing

    SciTech Connect (OSTI)

    Speiser, J.M.; Whitehouse, H.J.

    1983-01-01

    This paper reviews the major computational requirements for modern signal processing and surveys recent progress in parallel processing algorithms and architectures for their real-time implementation. The five matrix operations listed may be computed noniteratively, and systolic array architectures and algorithms are available which provide modular parallelism. Parallel computation of eigensystems, generalized eigensystems, the singular value decomposition, and the generalized singular value decomposition is more difficult, since the computation is necessarily iterative, and it is difficult to utilize only local communication between processing elements while maintaining high efficiency. Algorithms for the latter problems are therefore still the subject of intensive research. 33 references.

  8. LANSCE | User Resources | User Satisfaction Survey

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    User Satisfaction Survey We hope that your research at the Los Alamos Neutron Science Center was productive and successful. Your feedback is important to the Department of Energy and us. Please take a few minutes to respond to the questions on the following page. Your assessment of your experience at LANSCE is used by DOE to evaluate and fund the facility, by the User Group Executive Committee to determine issues and to make recommendations to address them, and by the management and staff of

  9. SQA_CodeVerification_Survey_FINAL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Survey o f S oftware Q uality Assurance a nd Code Verification Practices i n CASL Michael P ernice Idaho N ational L aboratory Matt S ieger Oak R idge N ational Laboratory March 26, 2 013 INL/EXT-13-28675 CASL-U-2013-0079-000 CASL-U-2013-0079-000 DISCLAIMER This information was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal

  10. Commercial Buildings Energy Consumption Survey - Office Buildings

    Reports and Publications

    2010-01-01

    Provides an in-depth look at this building type as reported in the 2003 Commercial Buildings Energy Consumption Survey. Office buildings are the most common type of commercial building and they consumed more than 17% of all energy in the commercial buildings sector in 2003. This special report provides characteristics and energy consumption data by type of office building (e.g. administrative office, government office, medical office) and information on some of the types of equipment found in office buildings: heating and cooling equipment, computers, servers, printers, and photocopiers.

  11. UAVs Being Used for Environmental Surveying

    SciTech Connect (OSTI)

    Chung, Sandra

    2010-01-01

    e Arcturus unmanned aerial vehicles, or UAVs, are much more sophisticated than your typical remote-controlled plane. INL robotics and remote sensing experts have added state-of-the-art imaging and wireless technology to the UAVs to create intelligent remote surveillance craft that can rapidly survey a wide area for damage and track down security threats. But these robot planes aren't just for security anymore. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

  12. UAVs Being Used for Environmental Surveying

    ScienceCinema (OSTI)

    Chung, Sandra

    2013-05-28

    e Arcturus unmanned aerial vehicles, or UAVs, are much more sophisticated than your typical remote-controlled plane. INL robotics and remote sensing experts have added state-of-the-art imaging and wireless technology to the UAVs to create intelligent remote surveillance craft that can rapidly survey a wide area for damage and track down security threats. But these robot planes aren't just for security anymore. Lots more content like this is available at INL's facebook page http://www.facebook.com/idahonationallaboratory.

  13. Line Focus Receiver Infrared Temperature Survey System

    Energy Science and Technology Software Center (OSTI)

    2010-06-01

    For ongoing maintenance and performance purposes, solar parabolic trough field operators desire to know that the Heat Collection Elements (HCEs) are performing properly. Measuring their temperature is one way of doing this One 30MW field can contain approximately 10,000 HCE's. This software interfaces with a GPS receiver and an infrared camera. It takes global positioning data from the GPS and uses this information to automate the infrared image capture and temperature analysis of individual solarmore » parabolic HCEs in a solar parabolic trough field With this software system an entire 30MW field can be surveyed in 2-3 days.« less

  14. The Dark Energy Survey CCD imager design

    SciTech Connect (OSTI)

    Cease, H.; DePoy, D.; Diehl, H.T.; Estrada, J.; Flaugher, B.; Guarino, V.; Kuk, K.; Kuhlmann, S.; Schultz, K.; Schmitt, R.L.; Stefanik, A.; /Fermilab /Ohio State U. /Argonne

    2008-06-01

    The Dark Energy Survey is planning to use a 3 sq. deg. camera that houses a {approx} 0.5m diameter focal plane of 62 2kx4k CCDs. The camera vessel including the optical window cell, focal plate, focal plate mounts, cooling system and thermal controls is described. As part of the development of the mechanical and cooling design, a full scale prototype camera vessel has been constructed and is now being used for multi-CCD readout tests. Results from this prototype camera are described.

  15. Eighteenth annual T and D construction survey

    SciTech Connect (OSTI)

    Not Available

    1983-08-01

    This survey measures utilities' actual midyear expenditures against projections. The results are cause for mild optimism, although some locales still have problems. Companies represented comprise 77.1% of installed capacity in 48 states and 75.9% of customers: 137 investor-owned utilities, 47 municipals and public power districts, 35 corporations, and 9 state or federal utilities. New and comparative data cover (1) MVA of distribution transformers (46 kW and below), (2) distribution circuit breakers, (3) capacitors (MVAr), (4) distribution substation banks, (5) transmission substation banks, (6) miles of transmission, (7) approximate circuit capability (GW), (8) tranmission circuit breakers, and (9) major construction by regions. 8 figures, 9 tables.

  16. Environmental Survey preliminary report, Fermi National Accelerator Laboratory, Batavia, Illinois

    SciTech Connect (OSTI)

    Not Available

    1988-10-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Fermi National Accelerator Laboratory (Fermilab), conducted September 14 through 25, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual participants for the Survey team are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Fermilab. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Fermilab, and interviews with site personnel. 110 refs., 26 figs., 41 tabs.

  17. A Southern Sky Survey with Fermi LAT and ASKAP

    SciTech Connect (OSTI)

    Cameron, Robert A.; /SLAC /KIPAC, Menlo Park

    2010-04-29

    We present the prospects for a future joint gamma-ray and radio survey of southern hemisphere sources using the Fermi Large Area Telescope (LAT) and the upcoming Australian Square Kilometre Array Pathfinder (ASKAP) radio telescope. ASKAP is a next generation radio telescope designed to perform surveys at GHz frequencies at a much higher survey speed than previous radio telescopes, and is scheduled to start engineering observations in 2011. The survey capabilities of both Fermi LAT and ASKAP are described, and the planned science surveys for ASKAP are summarized. We give some expected details of the Variable and Slow Transient (VAST) survey using ASKAP, which will search for transients on timescales from 5 seconds to years. Some observational properties of faint and transient sources seen at gamma-ray and radio wavelengths are summarized, and prospects and strategies for using ASKAP survey data for LAT source counterpart identification are summarized.

  18. Numerical investigation of spontaneous flame propagation under RCCI conditions

    DOE PAGES-Beta [OSTI]

    Bhagatwala, Ankit V; Sankaran, Ramanan; Kokjohn, Sage; Chen, Jacqueline H

    2015-06-30

    This paper presents results from one and two-dimensional direct numerical simulations under Reactivity Controlled Compression Ignition (RCCI) conditions of a primary reference fuel (PRF) mixture consisting of n-heptane and iso-octane. RCCI uses in-cylinder blending of two fuels with different autoignition characteristics to control combustion phasing and the rate of heat release. These simulations employ an improved model of compression heating through mass source/sink terms developed in a previous work by Bhagatwala et al. (2014), which incorporates feedback from the flow to follow a predetermined experimental pressure trace. Two-dimensional simulations explored parametric variations with respect to temperature stratification, pressure profiles andmore » n-heptane concentration. Furthermore, statistics derived from analysis of diffusion/reaction balances locally normal to the flame surface were used to elucidate combustion characteristics for the different cases. Both deflagration and spontaneous ignition fronts were observed to co-exist, however it was found that higher n-heptane concentration provided a greater degree of flame propagation, whereas lower n-heptane concentration (higher fraction of iso-octane) resulted in more spontaneous ignition fronts. A significant finding was that simulations initialized with a uniform initial temperature and a stratified n-heptane concentration field, resulted in a large fraction of combustion occurring through flame propagation. The proportion of spontaneous ignition fronts increased at higher pressures due to shorter ignition delay when other factors were held constant. For the same pressure and fuel concentration, the contribution of flame propagation to the overall combustion was found to depend on the level of thermal stratification, with higher initial temperature gradients resulting in more deflagration and lower gradients generating more ignition fronts. Statistics of ignition delay are computed to assess the Zel

  19. Numerical investigation of spontaneous flame propagation under RCCI conditions

    SciTech Connect (OSTI)

    Bhagatwala, Ankit V; Sankaran, Ramanan; Kokjohn, Sage; Chen, Jacqueline H

    2015-06-30

    This paper presents results from one and two-dimensional direct numerical simulations under Reactivity Controlled Compression Ignition (RCCI) conditions of a primary reference fuel (PRF) mixture consisting of n-heptane and iso-octane. RCCI uses in-cylinder blending of two fuels with different autoignition characteristics to control combustion phasing and the rate of heat release. These simulations employ an improved model of compression heating through mass source/sink terms developed in a previous work by Bhagatwala et al. (2014), which incorporates feedback from the flow to follow a predetermined experimental pressure trace. Two-dimensional simulations explored parametric variations with respect to temperature stratification, pressure profiles and n-heptane concentration. Furthermore, statistics derived from analysis of diffusion/reaction balances locally normal to the flame surface were used to elucidate combustion characteristics for the different cases. Both deflagration and spontaneous ignition fronts were observed to co-exist, however it was found that higher n-heptane concentration provided a greater degree of flame propagation, whereas lower n-heptane concentration (higher fraction of iso-octane) resulted in more spontaneous ignition fronts. A significant finding was that simulations initialized with a uniform initial temperature and a stratified n-heptane concentration field, resulted in a large fraction of combustion occurring through flame propagation. The proportion of spontaneous ignition fronts increased at higher pressures due to shorter ignition delay when other factors were held constant. For the same pressure and fuel concentration, the contribution of flame propagation to the overall combustion was found to depend on the level of thermal stratification, with higher initial temperature gradients resulting in more deflagration and lower gradients generating more ignition fronts. Statistics of ignition delay are computed to assess the Zel

  20. Oceanic Trace Gases Numeric Data Packages from the Carbon Dioxide Information Analysis Center (CDIAC)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    CDIAC products include numeric data packages, publications, trend data, atlases, models, etc. and can be searched for by subject area, keywords, authors, product numbers, time periods, collection sites, spatial references, etc. Most data sets or packages, many with numerous data files, are free to download from CDIAC's ftp area. CDIAC lists the following numeric data packages under the broad heading of Oceanic Trace Gases: Carbon Dioxide, Hydrographic, and Chemical Data Obtained during the R/V Ronald H. Brown Repeat Hydrography Cruise in the Atlantic Ocean: CLIVAR CO2 Section A16S_2005 ( 01/11/05 - 022405) Determination of Carbon Dioxide, Hydrographic, and Chemical Parameters during the R/V Nathaniel B. Palmer Cruise in the Southern Indian Ocean (WOCE Section S04I, 050396 - 070496) Inorganic Carbon, Nutrient, and Oxygen Data from the R/V Ronald H. Brown Repeat Hydrography Cruise in the Atlantic Ocean: CLIVAR CO2 Section A16N_2003a (060403 081103) Carbon Dioxide, Hydrographic, and Chemical Data Obtained During the R/V Maurice Ewing Cruise in the Atlantic Ocean (WOCE Section A17, 010494 - 032194) Global Ocean Data Analysis Project GLODAP: Results and Data Carbon Dioxide, Hydrographic, and Chemical Data Obtained During the R/V Knorr Cruises in the North Atlantic Ocean on WOCE Sections AR24 (1102 120596) and A24, A20, and A22 (053097 090397) Carbon Dioxide, Hydrographic and Chemical Data Obtained During the Nine R/V Knorr Cruises Comprising the Indian Ocean CO2 Survey (WOCE Sections I8SI9S, I9N, I8NI5E, I3, I5WI4, I7N, I1, I10, and I2; 120 194 012296) Carbon Dioxide, Hydrographic, and Chemical Data Obtained During the R/V Meteor Cruise 28/1 in the South Atlantic Ocean (WOCE Section A8, 032994 - 051294) Carbon Dioxide, Hydrographic, and Chemical Data Obtained During the R/V Knorr Cruise 138-3, -4, and -5 in the South Pacific Ocean (WOCE Sections P6E, P6C, and P6W, 050292 - 073092) Global Distribution of Total Inorganic Carbon and Total

  1. Survey of ceramic machining in Japan

    SciTech Connect (OSTI)

    Bandyopadhyay, B.P.; Blau, P.J.

    1993-07-01

    This report is a compilation of four subcontract reports provided by B. P. Bandyopadhyay who, while a visiting professor at Toyohashi University in Japan, conducted a survey of ceramic machining technology in that country from January 1 through December 31, 1992. Various aspects of machining technology were surveyed: types of parts being produced, types of ceramic materials being used, the nature of current ceramic machining research and development, and types of machine tools. The four separate reports compiled here were originally provided in a narrative, chronological form, and some of the information has been reorganized into topical areas for this compilation. This report is organized into three sections: The first describes ten ceramic machining research and development organizations and provides a reference list of their current technical publications; the second, two major trade shows; and the third, several other products and commercial developments noted during the course of Bandyopadhyay`s stay in Japan. An Appendix lists key individuals who are currently conducting ceramic machining research in Japan.

  2. 2003 survey of Canadian radiation oncology residents

    SciTech Connect (OSTI)

    Yee, Don . E-mail: donyee@cancerboard.ab.ca; Fairchild, Alysa; Keyes, Mira; Butler, Jim; Dundas, George

    2005-06-01

    Purpose: Radiation oncology's popularity as a career in Canada has surged in the past 5 years. Consequently, resident numbers in Canadian radiation oncology residencies are at all-time highs. This study aimed to survey Canadian radiation oncology residents about their opinions of their specialty and training experiences. Methods and Materials: Residents of Canadian radiation oncology residencies that enroll trainees through the Canadian Resident Matching Service were identified from a national database. Residents were mailed an anonymous survey. Results: Eight of 101 (7.9%) potential respondents were foreign funded. Fifty-two of 101 (51.5%) residents responded. A strong record of graduating its residents was the most important factor residents considered when choosing programs. Satisfaction with their program was expressed by 92.3% of respondents, and 94.3% expressed satisfaction with their specialty. Respondents planning to practice in Canada totaled 80.8%, and 76.9% plan to have academic careers. Respondents identified job availability and receiving adequate teaching from preceptors during residency as their most important concerns. Conclusions: Though most respondents are satisfied with their programs and specialty, job availability and adequate teaching are concerns. In the future, limited time and resources and the continued popularity of radiation oncology as a career will magnify the challenge of training competent radiation oncologists in Canada.

  3. Air-quality survey (TAGA 6000), Bakelite Thermosets Limited, Belleville, May-June, 1989: Survey report

    SciTech Connect (OSTI)

    De Brou, G.B.; Ng, A.C.W.

    1989-01-01

    From May 23 to June 2, 1989, an air quality survey was performed in Belleville to determine the level of phenol and ammonia in the ambient air downwind of Bakelite Thermosets Ltd. This report presents the analysis of air samples taken.

  4. Environmental Survey preliminary report, Sandia National Laboratories, Livermore, California

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This report contains the preliminary findings based on the first phase of an Environmental Survey at the Department of Energy (DOE) Sandia National Laboratories Livermore (SNLL), located at Livermore, California. The Survey is being conducted by DOE's Office of Environment, Safety and Health. The SNLL Survey is a portion of the larger, comprehensive DOE Environmental Survey encompassing all major operating facilities of DOE. The DOE Environmental Survey is one of a series of initiatives announced on September 18, 1985, by Secretary of Energy, John S. Herrington, to strengthen the environmental, safety, and health programs and activities within DOE. The purpose of the Environmental Survey is to identify, via a no fault'' baseline Survey of all the Department's major operating facilities, environmental problems and areas of environmental risk. The identified problem areas will be prioritized on a Department-wide basis in order of importance in 1989. The findings in this report are subject to modification based on the results from the Sampling and Analysis Phase of the Survey. The findings are also subject to modification based on comments from the Albuquerque Operations Office concerning the technical accuracy of the findings. The modified preliminary findings and any other appropriate changes will be incorporated into an Interim Report. The Interim Report will serve as the site-specific source for environmental information generated by the Survey, and ultimately as the primary source of information for the DOE-wide prioritization of environmental problems in the Survey Summary Report. 43 refs., 21 figs., 24 tabs.

  5. Aerial remote sensing surveys progress report: Helicopter geophysical survey of the Oak Ridge Reservation

    SciTech Connect (OSTI)

    Doll, W.E.; Nyquist, J.E.; King, A.D.; Bell, D.T.; Holladay, J.S.; Labson, V.F.; Pellerin, L.

    1993-03-01

    The 35,252 acre Department of Energy Oak Ridge Reservation (ORR) in the western portion of the Appalachian Valley and Ridge Province in Tennessee, has been a nuclear production and development facility for50 years. Contaminants in the many waste sites on the ORR include a wide variety of radioactive isotopes as well as many organic and inorganic compounds. The locations, geometry, and contents of many of these waste sites are reasonably well known, while others are poorly known or unknown. To better characterize the reasonably well known sites and search for additional potentially environmentally hazardous sites, a two-phase aerial survey of the ORR was developed. Phase I began in March 1992 and consisted of aerial radiation, multispectral scanner, and photographic (natural color and color infrared) surveys. Phase II began in November 1992 and is described in this report. Phase II consisted of helicopter electromagnetic (HEM), magnetic, and gamma radiation surveys. Targets of the survey included both man-made (drums, trench boundaries, burn pits, well heads) and geologic (fractures, faults, karst features, geologic contacts) features. The Phase II survey has three components: testing, reconnaissance, and high-resolution data acquisition. To date, the testing and reconnaissance data acquisition have been completed, and some of the data have been processed. They indicate that: (1) magnetic and HEM data are complementary and do not always highlight the same anomaly; (2) under favorable circumstances, helicopter magnetometer systems are capable of detecting groups of four or more 55-gal drums at detector altitudes of 15 m or less; (3) HEM data provide data that compare favorably with surface data collected over burial trenches, (4) well casings may be related to magnetic monopole anomalies, as would be expected; and (5) changes in HEM and magnetic anomaly character are related to lithologic changes and may be used to track contacts between known outcrops.

  6. SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

    SciTech Connect (OSTI)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L.; Arendt, R.; Barmby, P.; Barro, G.; Faber, S.; Guhathakurta, P.; Bouwens, R.; Cattaneo, A.; Croton, D.; Dave, R.; Dunlop, J. S.; Egami, E.; Finlator, K.; Grogin, N. A.; and others

    2013-05-20

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg{sup 2} to a depth of 26 AB mag (3{sigma}) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 {mu}m. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 {+-} 1.0 and 4.4 {+-} 0.8 nW m{sup -2} sr{sup -1} at 3.6 and 4.5 {mu}m to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  7. Numerical modeling of the SNS H{sup ?} ion source

    SciTech Connect (OSTI)

    Veitzer, Seth A.; Beckwith, Kristian R. C.; Kundrapu, Madhusudhan; Stoltz, Peter H.

    2015-04-08

    Ion source rf antennas that produce H- ions can fail when plasma heating causes ablation of the insulating coating due to small structural defects such as cracks. Reducing antenna failures that reduce the operating capabilities of the Spallation Neutron Source (SNS) accelerator is one of the top priorities of the SNS H- Source Program at ORNL. Numerical modeling of ion sources can provide techniques for optimizing design in order to reduce antenna failures. There are a number of difficulties in developing accurate models of rf inductive plasmas. First, a large range of spatial and temporal scales must be resolved in order to accurately capture the physics of plasma motion, including the Debye length, rf frequencies on the order of tens of MHz, simulation time scales of many hundreds of rf periods, large device sizes on tens of cm, and ion motions that are thousands of times slower than electrons. This results in large simulation domains with many computational cells for solving plasma and electromagnetic equations, short time steps, and long-duration simulations. In order to reduce the computational requirements, one can develop implicit models for both fields and particle motions (e.g. divergence-preserving ADI methods), various electrostatic models, or magnetohydrodynamic models. We have performed simulations using all three of these methods and have found that fluid models have the greatest potential for giving accurate solutions while still being fast enough to perform long timescale simulations in a reasonable amount of time. We have implemented a number of fluid models with electromagnetics using the simulation tool USim and applied them to modeling the SNS H- ion source. We found that a reduced, single-fluid MHD model with an imposed magnetic field due to the rf antenna current and the confining multi-cusp field generated increased bulk plasma velocities of > 200 m/s in the region of the antenna where ablation is often observed in the SNS source. We report

  8. Data Mining for Security Information: A Survey

    SciTech Connect (OSTI)

    Brugger, S T; Kelley, M; Sumikawa, K; Wakumoto, S

    2001-04-19

    This paper will present a survey of the current published work and products available to do off-line data mining for computer network security information. Hundreds of megabytes of data are collected every second that are of interest to computer security professionals. This data can answer questions ranging from the proactive, ''Which machines are the attackers going to try to compromise?'' to the reactive, ''When did the intruder break into my system and how?'' Unfortunately, there's so much data that computer security professionals don't have time to sort through it all. What we need are systems that perform data mining at various levels on this corpus of data in order to ease the burden of the human analyst. Such systems typically operate on log data produced by hosts, firewalls and intrusion detection systems as such data is typically in a standard, machine readable format and usually provides information that is most relevant to the security of the system. Systems that do this type of data mining for security information fall under the classification of intrusion detection systems. It is important to point out that we are not surveying real-time intrusion detection systems. Instead, we examined what is possible when the analysis is done off-line. Doing the analysis off-line allows for a larger amount of data correlation between distant sites who transfer relevant log files periodically and may be able to take greater advantage of an archive of past logs. Such a system is not a replacement for a real-time intrusion detection system but should be used in conjunction with one. In fact, as noted previously, the logs of the real-time IDS may be one of the inputs to the data mining system. We will concentrate on the application of data mining to network connection data, as opposed to system logs or the output of real-time intrusion detection systems. We do this primarily because this data is readily obtained from firewalls or real-time intrusion detectors and it

  9. Numerical Study of Velocity Shear Stabilization of 3D and Theoretical...

    Office of Scientific and Technical Information (OSTI)

    We studied the feasibility of resonantly driving GAMs in tokamaks. A numerical simulation ... Theoretical support was provided for the Maryland Centrifugal Experiment, funded in a ...

  10. Improvements to the RELAP5-3D Nearly-Implicit Numerical Scheme

    SciTech Connect (OSTI)

    Richard A. Riemke; Walter L. Weaver; RIchard R. Schultz

    2005-05-01

    The RELAP5-3D computer program has been improved with regard to its nearly-implicit numerical scheme for twophase flow and single-phase flow. Changes were made to the nearly-implicit numerical scheme finite difference momentum equations as follows: (1) added the velocity flip-flop mass/energy error mitigation logic, (2) added the modified Henry-Fauske choking model, (3) used the new time void fraction in the horizontal stratification force terms and gravity head, and (4) used an implicit form of the artificial viscosity. The code modifications allow the nearly-implicit numerical scheme to be more implicit and lead to enhanced numerical stability.

  11. Numerical method to test a theoretical model of the quantum interferen...

    Office of Scientific and Technical Information (OSTI)

    A numerical method is provided to fit the experimental conductivity to the complicated conductivity expression for the quantum interference effect of Anderson localization. This ...

  12. CASL-8-2015-0103-000 Multi-Phase Flow: Direct Numerical Simulation

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    3-000 Multi-Phase Flow: Direct Numerical Simulation Igor Bolotnov North Carolina State University Gretar Tryggvason University of Notre Dame July 8-10, 2013 CASL-U-2015-0103-000 Multi-Phase Flow: Direct Numerical Simulation Multi-Phase Flow: Direct Numerical Simulation Igor Bolotnov - North Carolina State University Gretar Tryggvason - University of Notre Dame CASL Education Workshop, Oak Ridge National Laboratories, July 9-10, 2013 CASL-U-2015-0103-000 Multi-Phase Flow: Direct Numerical

  13. Terrain effects in resistivity and magnetotelluric surveys

    SciTech Connect (OSTI)

    Holcombe, H.T.

    1982-12-01

    A three-dimensional finite element computer algorithm which can accommodate arbitrarily complex topography and subsurface structure, has been developed to model the resistivity response of the earth. The algorithm has undergone extensive evaluation and is believed to provide accurate results for realistic earth models. Testing included comparison to scale model measurements, analytically calculated solutions, and results calculated numerically by other independent means. Computer modeling experiments have demonstrated that it is possible to remove the effect of topography on resistivity data under conditions where such effects dominate the response. This can be done without resorting to lengthy and costly trial and error computer modeling. After correction, the data can be interpreted with confidence that the anomalies are due only to subsurface structure. The results of case studies on resistivity field data measured in high relief topography are discussed.

  14. Vegetation survey of PEN Branch wetlands

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    A survey was conducted of vegetation along Pen Branch Creek at Savannah River Site (SRS) in support of K-Reactor restart. Plants were identified to species by overstory, understory, shrub, and groundcover strata. Abundance was also characterized and richness and diversity calculated. Based on woody species basal area, the Pen Branch delta was the most impacted, followed by the sections between the reactor and the delta. Species richness for shrub and groundcover strata were also lowest in the delta. No endangered plant species were found. Three upland pine areas were also sampled. In support of K Reactor restart, this report summarizes a study of the wetland vegetation along Pen Branch. Reactor effluent enters Indian Grove Branch and then flows into Pen Branch and the Pen Branch Delta.

  15. The 43rd annual corrosion survey

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    Applying the science of corrosion prevention to energy (petroleums, oil, LNG) pipelines in actual field operating conditions is a vital aspect of safely and efficiently operating a pipeline system. Ignoring corrosion prevention will allow this never-sleeping enemy to steal the strength from steel pipelines, turning them into dangerous junk. Various methods, techniques and technologies are available to the corrosion control department of cross-country pipelines and gas distribution utilities around the world. Every year, billions of dollars on corrosion control, including everything from coatings to cathodic protection facilities to pigging, are spent to keep these energy pipeline systems in peak operational efficiency. This paper reports that for more than 4 decades, this corrosion survey has sought out the opinions of corrosion control experts, asking them what are the problems they face daily and innovative solutions they have tried to help solve these problems.

  16. A survey of early warning technologies

    SciTech Connect (OSTI)

    Smith, G.D.; Arlowe, H.D.; Williams, J.D.

    1995-07-01

    This paper presents a survey of technologies useful in providing early warning in physical security systems. Early warning is important in virtually all types of security systems whether they are used for temporary (tactical, portable, or semi-permanent) applications, border warning, fixed-site detection, or standoff surveillance detection. With the exception of the standoff surveillance detection systems, all systems discussed in this paper usually involve a moving target. The fact that a person(s) to be detected in a standoff surveillance scenario is not moving presents challenging problems and requires different applications of technology. The technologies commonly used to detect moving targets and some suggestions for detection of stationary targets are addressed in this paper.

  17. An intelligent inspection and survey robot

    SciTech Connect (OSTI)

    Byrd, J.S.

    1995-10-01

    Large quantities of mixed and low-level radioactive waste contained in 55-, 85-, and 110-gallon steel drums are stored at Department of Energy (DOE) warehouses located throughout the United States. The steel drums are placed on pallets and stacked on top of one another, forming a column of drums ranging in heights of one to four drums and up to 16 feet high. The columns of drums are aligned in rows forming an aisle approximately three feet wide between the rows of drums. Tens of thousands of drums are stored in these warehouses throughout the DOE complex. ARIES (Autonomous Robotic Inspection Experimental System) is under development for the DOE to survey and inspect these drums. The robot will navigate through the aisles and perform an inspection operation, typically performed by a human operator, making decisions about the condition of the drums and maintaining a data of pertinent information about each drum.

  18. Shallow (2-meter) temperature surveys in Colorado

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Zehner, Richard E.

    2012-02-01

    Citation Information: Originator: Geothermal Development Associates, Reno, Nevada Publication Date: 2012 Title: Colorado 2m Survey Edition: First Publication Information: Publication Place: Reno Nevada Publisher: Geothermal Development Associates, Reno, Nevada Description: Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh et al. (2007) and Sladek et al. (2007), and are summarized here. The survey method was devised to measure temperature as far below the zone of solar influence as possible, have minimal equilibration time, and yet be portable enough to fit on the back of an all-terrain vehicle (ATV); Figure 2). This method utilizes a direct push technology (DPT) technique where 2.3 m long, 0.54” outer diameter hollow steel rods are pounded into the ground using a demolition hammer. Resistance temperature devices (RTD) are then inserted into the rods at 2-meter depths, and allowed to equilibrate for one hour. The temperatures are then measured and recorded, the rods pulled out of the ground, and re-used at future sites. Usually multiple rods are planted over the course of an hour, and then the sampler returns back to the first station, measures the temperatures, pulls the rods, and so on, to eliminate waiting time. At Wagon Wheel Gap, 32 rods were planted around the hot springs between June 20 and July 1, 2012. The purpose was to determine the direction of a possible upflow fault or other structure. Temperatures at 1.5m and 2m depths were measured and recorded in the attribute table of this point shapefile. Several anomalous temperatures suggest that outflow is coming from a ~N60W striking fault or shear zone that contains the quartz-fluorite-barite veins of the adjacent patented mining claims. It should be noted that temperatures at 2m

  19. ALCF-2010UserSurveyResultsReport

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    10 User Survey Results Page 1 of 36 Argonne L eadership C omputing F acility 2010 U ser S urvey R esults Methodology: Two v ersions o f t he A nnual U ser S urvey w ere c reated a nd c irculated i n 2 010, t he INCITE/ALCC S urvey a nd t he D iscretionary S urvey. D iscretionary users w ere n ot invited to participate in user calls l ast y ear a nd w ere n ot g iven a ccess t o a C atalyst for s upport, so t he D iscretionary S urvey did not contain questions about these t wo support m

  20. A Survey of Techniques for Approximate Computing

    DOE PAGES-Beta [OSTI]

    Mittal, Sparsh

    2016-03-18

    Approximate computing trades off computation quality with the effort expended and as rising performance demands confront with plateauing resource budgets, approximate computing has become, not merely attractive, but even imperative. Here, we present a survey of techniques for approximate computing (AC). We discuss strategies for finding approximable program portions and monitoring output quality, techniques for using AC in different processing units (e.g., CPU, GPU and FPGA), processor components, memory technologies etc., and programming frameworks for AC. Moreover, we classify these techniques based on several key characteristics to emphasize their similarities and differences. Finally, the aim of this paper is tomore » provide insights to researchers into working of AC techniques and inspire more efforts in this area to make AC the mainstream computing approach in future systems.« less