National Library of Energy BETA

Sample records for notes values shown

  1. Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Notes Notes Why the June 1995 ERSUG Meeting is Important Bill McCurdy describes below a competitive process through which a decision will be made by MICS Division (formerly the OSC) in the June, 1995 timeframe to: (1) possibly move NERSC to Lawrence Berkeley National Laboratory, and (2) redefine to some extent the mission of the Center. All of this would be effected within a significantly reduced cost envelope. The LLNL proposal to keep NERSC where it is and the LBL proposal may soon be

  2. Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Notes Notes Live Media Streaming via RealPlayer Media streaming of these lectures will be provided via RealPlayer. Users of Windows- or Macintosh-based computers will be able to see and hear the presentation by way of the following procedures. 1. Download and open the slide files onto your computer. 2. Make certain you have the current version of RealPlayer installed. These are available at the Real Free Player Download web site 3. Start the RealPlayer application, and then enter the following

  3. OTS NOTE

    Office of Legacy Management (LM)

    c3 Alexander Williams FROM: Ed Mitchellcm SUBJECT: Babcock and Wilcox Elimination Recommendation The purpose of this note is to provide you with certain inf regarding the ...

  4. OTS NOTE

    Office of Legacy Management (LM)

    941 OTS NOTE DATE: July 2, 1990 TO: W. Alexander Williams FROM : Don Mackenzie d%? SUBJECT: Elimination of 3 Facilities from NSRAP . + 9 Enclosed are elimination recommendations...

  5. Blue Note

    ScienceCinema

    Murray Gibson

    2010-01-08

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  6. Blue Note

    SciTech Connect

    Murray Gibson

    2007-04-27

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  7. OTS NOTE

    Office of Legacy Management (LM)

    OTS NOTE DATE: August 4, 1992 TO: Alexander Williams FROM: Ed Mitchell, Steve Fieser ' 565 SUBJECT: Revised Designation Package for Baker Brothers Site We have prepared the Designation Summary you requested for Baker Brothers Site, in Toledo, Ohio. This package supersedes the previous one provided on May 1, 1992, to reflect the documents that have since been finalized. The designationpackage consists of the following: o Designation Summary (8/4/92) o Authority Review (7/16/92) o Radiological

  8. TECHNICAL NOTE

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    TECHNICAL NOTE Broadband extreme-ultraviolet survey spectrometer for short-time-scale experiments B. E. Chapman, D. J. Den Hartog, and R. J. Fonck A fast and inexpensive spectrometer system has been developed to record extreme-UV impurity spectra in a magnetic-fusion-research device. To simplify the vacuum system, light is passed out of the spectrom- eter's vacuum to the detector with a sodium-salicylate-coated, fiber-optic coupler. This coupler is positioned so that the focal field is nearly

  9. Note: Fast neutron efficiency in CR-39 nuclear track detectors

    SciTech Connect

    Cavallaro, S.

    2015-03-15

    CR-39 samples are commonly employed for fast neutron detection in fusion reactors and in inertial confinement fusion experiments. The literature reported efficiencies are strongly depending on experimental conditions and, in some cases, highly dispersed. The present note analyses the dependence of efficiency as a function of various parameters and experimental conditions in both the radiator-assisted and the stand-alone CR-39 configurations. Comparisons of literature experimental data with Monte Carlo calculations and optimized efficiency values are shown and discussed.

  10. Notes for Visualization Requirememnts

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Notes for Visualization Requirememnts Notes from June 5, 2002, Visualization Requirements for DOE-Sponsored Computational Science and Engineering Applications A DOE Workshop to Be ...

  11. Table 2. Value and average value of photovoltaic module shipments...

    Energy Information Administration (EIA) (indexed site)

    Value and average value of photovoltaic module shipments, 2015" "Module value, total ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report' Note: ...

  12. Calculation note review

    SciTech Connect

    Ramble, A.L.

    1996-09-30

    This document contains a review of the calculation notes which were prepared for the Tank Waste Remediation System Basis for Interim Operation.

  13. ARM - Field Notes Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    CenterField NotesField Notes Article Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes118 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 7 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 CARES 1 Data Quality Office 2 ENA 2 GOAMAZON 7 HI-SCALE 5 LASIC 3 MAGIC 15 MC3E 17 PECAN 3 SGP 8 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories

  14. Notes and Action Items

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Notes and Action Items Notes and Action Items Report on the NUGEX business meeting of June 6, 2000, in Oak Ridge Minute notes by Bas Braams First of all, many thanks to the organizers of the preceding NUG meeting: Roberta Boucher, David Dean, Brian Hingerty, Bill Kramer, Donald Spong and Malcolm Stocks. Likewise thanks to Brian Hingerty and Mike Minkoff for organizing the Users Helping Users events, and to Tom DeBoni, Osni Marques, Jeffrey Squyres and David Turner for the NERSC training classes.

  15. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    Corporate Board Notes and Slides Notes from EM Corporate QA Board Tele-Conference - February 22, 2010 1 of 2 General: Attendance of voting board members was documented. All members were present or had a representative present on the call. Previous 5 Focus Areas: Dave Tuttel presented the proposed closeout of the previous 5 focus areas for the EM Corporate Board. * Focus Area 1 (Requirements Flow Down) - Board voted to close the focus area (unanimous) * Focus Area 2 (Adequate NQA-1 Suppliers) -

  16. VOL2NOTE.CHP:Corel VENTURA

    Gasoline and Diesel Fuel Update

    B Explanatory Notes The following Explanatory Notes are provided to assist in understanding and interpreting the data presented in this publication. * Note 1. Petroleum Supply Reporting System * Note 2. Monthly Petroleum Supply Reporting System * Note 3. Technical Notes for Detailed Statistics Tables * Note 4. Domestic Crude Oil Production * Note 5. Export Data * Note 6. Quality Control and Data Revision * Note 7. Frames Maintenance * Note 8. Descriptive Monthly Statistics * Note 9. Practical

  17. Template:Note | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search Note Note: Usage Method 1 The following displays the note icon and the word 'Note:'. You can follow this with whatever textimagesmarkup you like, and it works...

  18. Notes and Definitions

    Weekly Natural Gas Storage Report

    Notes and Definitions This report tracks U.S. natural gas inventories held in underground storage facilities. The weekly stocks generally are the volumes of working gas as of the report date. The "net change" in reported stock levels reflects all events affecting working gas in storage, including injections, withdrawals, and reclassifications between base and working gas. The "implied flow" estimate represents movements of working natural gas into or out of underground

  19. Final Rulemaking, 10 CFR Part 1021, with Amendments Shown In Tracked Changes

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document presents the final rule as issued September 27, 2011, amendments shown with changes tracked (additions in blue, deletions in red). Categorical exclusions are listed in Appendices A...

  20. DOE Takes Action to Stop the Sales of Air-Con Air Conditioner Models Shown

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to Violate Federal Energy Efficiency Appliance Standards | Department of Energy Action to Stop the Sales of Air-Con Air Conditioner Models Shown to Violate Federal Energy Efficiency Appliance Standards DOE Takes Action to Stop the Sales of Air-Con Air Conditioner Models Shown to Violate Federal Energy Efficiency Appliance Standards September 23, 2010 - 12:00am Addthis Washington, DC - The Department of Energy announced today that it has taken action against Air-Con, International, requiring

  1. AIRMaster+ Release Notes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Release Notes AIRMaster+ Release Notes AIRMaster+ (Version 1.2.7) Release Notes Release Notes (Version 1.2.7) (296.45 KB) More Documents & Publications AIRMaster+ Software Tool Brochure AIRMaster+ User Manual AIRMaster+ Tool Introduction

  2. Research Notes and Information References

    Energy Science and Technology Software Center

    1994-12-01

    The RNS (Research Notes System) is a set of programs and databases designed to aid the research worker in gathering, maintaining, and using notes taken from the literature. The sources for the notes can be books, journal articles, reports, private conversations, conference papers, audiovisuals, etc. The system ties the databases together in a relational structure, thus eliminating data redundancy while providing full access to all the information. The programs provide the means for access andmore » data entry in a way that reduces the key-entry burden for the user. Each note has several data fields. Included are the text of the note, the subject classification (for retrieval), and the reference identification data. These data are divided into four databases: Document data - title, author, publisher, etc., fields to identify the article within the document; Note data - text and page of the note; Sublect data - subject categories to ensure uniform spelling for searches. Additionally, there are subsidiary files used by the system, including database index and temporary work files. The system provides multiple access routes to the notes, both structurally (access method) and topically (through cross-indexing). Output may be directed to a printer or saved as a file for input to word processing software.« less

  3. Austin Energy- Value of Solar Residential Rate

    Energy.gov [DOE]

    Note: In August 2014, the City Council of Austin, Texas, enacted Resolution No. 20140828, which directed program changes to the Value of Solar Tariff as follows:

  4. GETEM Manuals and Revision Notes

    Energy.gov [DOE]

    Please refer to these manuals and revision notes prior to downloading and running the Geothermal Electricity Technology Evaluation Model (GETEM). Because this is a beta version, you are urged to...

  5. OpenEI Community - notes

    OpenEI (Open Energy Information) [EERE & EIA]

    more

    http:en.openei.orgcommunityblognotes-callcomments notes Linked Open Data Workshop in Washington, D.C. Fri, 28 Sep 2012 00:57:30 +0000 Jweers 521 at...

  6. Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Accomodations at Argonne The Argonne contact person for the NUG Meeting is Mike Minkoff of the Mathematics and Computer Science Division. His phone number is (630) 252-7234. Last ...

  7. Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    topic of discussion was the issue of the processing capabilities of the PVP cluster. ... for its general users to take some of the load from the MPP andor the PVP platforms. ...

  8. Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    these lectures will be provided via RealPlayer. Users of Windows- or Macintosh-based computers will be able to see and hear the presentation by way of the following procedures. 1....

  9. Topic A Note: Includes STEPS Subtopic

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Topic A Note: Includes STEPS Subtopic 33 Total Projects Developing and Enhancing Workforce Training Programs...

  10. Value Engineering

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2002-12-30

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  11. Company Level Imports Explanatory Notes

    Gasoline and Diesel Fuel Update

    Company Level Imports Explanatory Notes Notice: Ongoing analysis of imports data to the Energy Information Administration reveals that some imports are not correctly reported on Form EIA-814 "Monthly Imports Report". Contact with the companies provides sufficient information for EIA to include these imports in the data even though they have not provided complete reports on Form EIA-814. Estimates are included in aggregate data, but the estimates are not included in the file of

  12. Lecture notes for criticality safety

    SciTech Connect

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  13. Manhattan Project: A Note on Sources

    Office of Scientific and Technical Information (OSTI)

    A NOTE ON SOURCES Resources > Note on Sources The text for this web site is a combination of original material and adaptations from previous publications of the Department of ...

  14. Manhattan Project: A Note on Sources

    Office of Scientific and Technical Information (OSTI)

    A NOTE ON SOURCES Resources > Note on Sources The text for this web site is a combination ... To the best of our knowledge, all text and images on this web site are in the public ...

  15. Meeting Summary Notes | Department of Energy

    Office of Environmental Management (EM)

    Department of Energy Notes re NOI for Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation notes from meeting on Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation (45.83 KB) More Documents & Publications Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Public comment re Convention on Supplementary Compensation on Nuclear Damage Contingent

  16. EM QA Working Group September 2011 Notes

    Energy.gov [DOE]

    Meeting minutes and notes from the EM QA Working Group video conference meeting held in September 2011.

  17. 499px-Aquatint_of_a_Doctor_in_divinity_at_the_University_of_Oxford,_shown_wearing_convocation_dress.jpg

    Office of Scientific and Technical Information (OSTI)

    | OSTI, US Dept of Energy Office of Scientific and Technical Information 499px-Aquatint_of_a_Doctor_in_divinity_at_the_University_of_Oxford,_shown_wearing_convocation_dress

  18. Table 4. Average value of photovoltaic modules, 2005-2015

    Energy Information Administration (EIA) (indexed site)

    Average value of photovoltaic modules, 2005-2015" "(dollars per peak watt)" ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report.' Note: ...

  19. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Hydrogen The lightest of all gases, occurring chiefly in combination with oxygen in water; ... Background, Survey Methodology and Statistical Details . Explanatory Notes Hydrogen ...

  20. Property:ExplorationNotes | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    the property "ExplorationNotes" Showing 1 page using this property. R RAPIDOverviewGeothermalExplorationCalifornia + The Geothermal Resources Prospecting Permit (PRC...

  1. EM QA Working Group September 2011 Notes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    suspectcounterfeit items, software QA, and corrective actions? Bob also noted that we need to be diligent in the understanding and use of the metrics to avoid potential issues ...

  2. VALUE STUDY

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PREPARED FOR: DEPARTMENT OF ENERGY OFFICE OF CONTRACT RESOURCES AND RESOURCE MANAGEMENT SEPTEMBER 2008 UPDATE BY: AON CONSULTING INC. FEBRUARY 1999 UPDATED SEPTEMBER 29, 2008 VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 Contents PART I Overview of Value Study Illustrative Flow

  3. Value Engineering

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2004-01-07

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  4. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Note: The conversion factor for asphalt is 5.5 barrels per short ton. Barrel A unit of volume equal to 42 U.S. gallons. Biomass-Based Diesel Fuel Biodiesel and other renewable ...

  5. Coal Working Group - AEO2017 Summary Notes

    Energy Information Administration (EIA) (indexed site)

    AEO2017 MODELING ASSUMPTIONS AND NOTE INPUTS ARE SUBJECT TO CHANGE. 1 September 7, 2016 MEMORANDUM TO: Dr. Ian Mead Assistant Administrator for Energy Analysis Jim Diefenderfer Director, Office of Electricity, Coal, Nuclear, and Renewables Analysis FROM: Coal and Uranium Analysis Team SUBJECT: Notes from the AEO2017 1 st Coal Working Group held on August 31, 2016 Attendees (62) *Indicates participation via WebEx. In an effort to solicit feedback each year, the Coal and Uranium Analysis Team

  6. Prestack mid-value filtering

    SciTech Connect

    Changlian, X. )

    1992-01-01

    This paper describes mid-value filtering, a specific nonlinear smoothing filtering, and widely used in graphic processing, etc. Mid-value filtering before stack of seismic data can remove wild value (inconceivable particular big value) and improve signal-noise ratio. In view of big data volume before stack, computation efficiency of mid-value filtering is critical to its feasibility. The algorithm used here is sufficiently based on the properties of mid-value filtering, so that the computation efficiency is greatly improved. It is experimentally shown that prestack mid-value filtering can quite well eliminate wild value, abnormal traces as well as surface waves, and raise signal-noise ratio. After lateral low frequency noises are removed by high pass filtering, mid-value filtering works better.

  7. PIA - Savannah River Operations Office Lotus Domino/Notes System...

    Energy.gov [DOE] (indexed site)

    Lotus DominoNotes System PDF icon PIA - Savannah River Operations Office Lotus DominoNotes System More Documents & Publications PIA - DOE Savannah River Operations Office PRISM ...

  8. Notes on Newton-Krylov based Incompressible Flow Projection Solver...

    Office of Scientific and Technical Information (OSTI)

    Notes on Newton-Krylov based Incompressible Flow Projection Solver Citation Details In-Document Search Title: Notes on Newton-Krylov based Incompressible Flow Projection Solver The ...

  9. Notes on Newton-Krylov based Incompressible Flow Projection Solver...

    Office of Scientific and Technical Information (OSTI)

    Notes on Newton-Krylov based Incompressible Flow Projection Solver Citation Details In-Document Search Title: Notes on Newton-Krylov based Incompressible Flow Projection Solver ...

  10. Note: On the wavelength dependence of the intensity calibration...

    Office of Scientific and Technical Information (OSTI)

    Note: On the wavelength dependence of the intensity calibration factor of extreme ... Title: Note: On the wavelength dependence of the intensity calibration factor of extreme ...

  11. Note: Coherent resonances observed in the dissociative electron...

    Office of Scientific and Technical Information (OSTI)

    Note: Coherent resonances observed in the dissociative electron attachment to carbon monoxide Citation Details In-Document Search Title: Note: Coherent resonances observed in the ...

  12. Application Note: Power Grid Modeling With Xyce.

    SciTech Connect

    Sholander, Peter E.

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  13. RAP Meeting Transcribed Flip Chart Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Flip Chart Notes February 15, 2012 Site-wide Permit Workshop May 3 1. Have "post-workshop" session to discuss HAB next steps 2. Recommend Ecology sponsors & facilitates Workshop - Ecology captures notes, but HAB members track issues of concern, too. 3. Web-ex for public when it fits 4. Pre-workshop meeting with HAB issue leaders (potential speakers) Page 1 300 Area HAB next steps... IM & Pam 1. Issue managers meet to review potential issues for HAB/committees 2. Bring back to

  14. Xyce parallel electronic simulator release notes.

    SciTech Connect

    Keiter, Eric Richard; Hoekstra, Robert John; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Rankin, Eric Lamont; Coffey, Todd Stirling; Pawlowski, Roger Patrick; Santarelli, Keith R.

    2010-05-01

    The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. Specific requirements include, among others, the ability to solve extremely large circuit problems by supporting large-scale parallel computing platforms, improved numerical performance and object-oriented code design and implementation. The Xyce release notes describe: Hardware and software requirements New features and enhancements Any defects fixed since the last release Current known defects and defect workarounds For up-to-date information not available at the time these notes were produced, please visit the Xyce web page at http://www.cs.sandia.gov/xyce.

  15. Notes on beam dynamics in linear accelerators

    SciTech Connect

    Gluckstern, R.L.

    1980-09-01

    A collection of notes, on various aspects of beam dynamics in linear accelerators, which were produced by the author during five years (1975 to 1980) of consultation for the LASL Accelerator Technology (AT) Division and Medium-Energy Physics (MP) Division is presented.

  16. Technical Note: Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution

    SciTech Connect

    Kairn, T.; Kenny, J.; Crowe, S. B.; Fielding, A. L.; Franich, R. D.; Johnston, P. N.; Knight, R. T.; Langton, C. M.; Schlect, D.; Trapp, J. V.

    2010-04-15

    Purpose: The component modules in the standard BEAMnrc distribution may appear to be insufficient to model micro-multileaf collimators that have trifaceted leaf ends and complex leaf profiles. This note indicates, however, that accurate Monte Carlo simulations of radiotherapy beams defined by a complex collimation device can be completed using BEAMnrc's standard VARMLC component module. Methods: That this simple collimator model can produce spatially and dosimetrically accurate microcollimated fields is illustrated using comparisons with ion chamber and film measurements of the dose deposited by square and irregular fields incident on planar, homogeneous water phantoms. Results: Monte Carlo dose calculations for on-axis and off-axis fields are shown to produce good agreement with experimental values, even on close examination of the penumbrae. Conclusions: The use of a VARMLC model of the micro-multileaf collimator, along with a commissioned model of the associated linear accelerator, is therefore recommended as an alternative to the development or use of in-house or third-party component modules for simulating stereotactic radiotherapy and radiosurgery treatments. Simulation parameters for the VARMLC model are provided which should allow other researchers to adapt and use this model to study clinical stereotactic radiotherapy treatments.

  17. LLW notes, Vol. 11, No. 2

    SciTech Connect

    1996-03-01

    `LLW Notes` is distributed by Afton Associates, Inc. to Low-Level Radioactive Waste Forum Participants and other state, and compact officials identified by those Participants to receive LLW Notes. The Low-Level Radioactive Waste Forum (LLW Forum) is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  18. LLW notes. Volume 11, No.8

    SciTech Connect

    1996-12-01

    `LLW Notes` is distributed by Afton Associates, Inc. to Low-Level Radioactive Waste Forum Participants and other state, and compact officials identified by those Participants to receive `LLW Notes`. The Low-Level Radioactive Waste Forum (LLW Forum) is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  19. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Receipts by Pipeline, Tanker, and Barge Between PAD Districts Definitions Key Terms Definition Asphalt A dark-brown-to-black cement-like material containing bitumens as the predominant constituent obtained by petroleum processing; used primarily for road construction. It includes crude asphalt as well as the following finished products: cements, fluxes, the asphalt content of emulsions (exclusive of water), and petroleum distillates blended with asphalt to make cutback asphalts. Note: The

  20. labNotes | netl.doe.gov

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    LabNotes NETL Validates Innovative Spectrometry Technique libs-PIC.JPG Graphic representation of in situ measurements of calcium carbonate dissolution under rising CO2 pressure using underwater laser-induced breakdown spectroscopy. Image used as the front cover for the Journal of Analytical Atomic Spectrometry's July 2016 issue. An article highlighting NETL's research into the use of laser spectrometry to collect data vital to ensuring the efficacy and safety of geologic carbon storage sites was

  1. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Shale Gas Production Definitions Key Terms Definition Shale Gas Natural gas produced from organic (black) shale formations. For definitions of related energy terms, refer to the EIA Energy Glossary. Sources Energy Information Administration, Office of Oil and Gas Explanatory Notes Shale Gas production data collected in conjunction with proved reserves data on Form EIA-23 are unofficial. Official Shale Gas production data from Form EIA-895 can be found in Natural Gas Gross Withdrawals and

  2. HSEP Committee Meeting - Transcribed Flipchart Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Flipchart Notes August 8, 2013 Safety Culture Next Steps 1. Continue to get periodic briefings from SCIPT - progress on action items, contractor engagement, etc. 2. Get update on HSS review Page 1 DS Tanks/Flammable Gas - Next Steps 1. Update after DOE report on tank flow rate monitoring is available (Jan/Feb) 2. Tom w/follow up with concerns about pressurization alarms Page 2 Emergency Preparedness/Response: Input - Strategies for Awareness 1. Use real examples when trying to increase

  3. eNews Note of Appreciation

    National Nuclear Security Administration (NNSA)

    3 Issue 25 ASC eNews Quarterly Newsletter September 2013 A Note of Appreciation Reeta Garber The ASC Program would like to recognize Reeta Garber for her leadership in designing and developing programmatic communications tools and activities and to wish her the very best as she retires (again) to begin a new phase in her life. Since 1998 Reeta has supported the ASC Program as an important member of the core team responsible for spreading the word about DOE/NNSA laboratory and Federal efforts in

  4. Meeting Notes re NOI for Convention on Supplementary Compensation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Notes re NOI for Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation notes from meeting on Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation (45.83 KB) More Documents & Publications Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Public comment re Convention on Supplementary Compensation on Nuclear Damage Contingent

  5. DOE Durability Working Group October 2011 Meeting Notes | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy 1 Meeting Notes DOE Durability Working Group October 2011 Meeting Notes Meeting notes from the Fall 2011 Durability Working Group (DWG) Meeting sponsored by the U.S. Department of Energy (DOE) Fuel Cell Technologies Program. Notes also include a summary of progress on action items from the Spring 2011 DWG meeting. durability_working_group_minutes_oct_2011.pdf (54.58 KB) More Documents & Publications DOE Durability Working Group October 2010 Meeting Minutes DOE Durability Working

  6. Value of Solar Tariff

    Energy.gov [DOE]

    Note: This program is only available to customers of one of the state's investor-owned utilities (Alliant, Minnesota Power, Otter Tail Power Company, Xcel Energy) in the Community Solar Gardens...

  7. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    and Value of Natural Gas Production Report" , EIA estimates based on data from the Bureau of Safety and Environmental Enforcement, and predecessor agencies; state agencies; and...

  8. The MicroBooNE Experiment - Public Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Notes Page Back to the Publications Page 7/4/16 MICROBOONE-NOTE-1019-PUB Convolutional Neural Networks Applied to Neutrino Events in a Liquid Argon Time Projection Chamber 7/4/16 MICROBOONE-NOTE-1017-PUB A Method to Extract the Charge Distribution Arriving at the TPC Wire Planes in MicroBooNE 7/4/16 MICROBOONE-NOTE-1016-PUB Noise Characterization and Filtering in the MicroBooNE TPC 7/4/16 MICROBOONE-NOTE-1015-PUB The Pandora multi-algorithm approach to automated pattern recognition in LAr

  9. Note on Graphite Oxidation by Oxygen and Moisture

    SciTech Connect

    Wichner, Robert; Burchell, Timothy D; Contescu, Cristian I

    2009-02-01

    Simplified equations of graphite oxidation are reviewed for semi-infinite slab, finite slab, and cylinder geometries, using the principal assumptions of linearized oxidation kinetics and quasi-steady state oxidation profile. All equations are coupled to a general surface mass transfer boundary condition. The equations include those for oxidant concentration distribution, surface oxidation rate, burnoff profile, and oxidation efficiency. This review also covers some areas that may not be well recognized. The key role of the effective diffusivity is highlighted, with a brief review of measured values. The temperature-dependence of the surface oxidation rate is shown to be more complex than usually shown for the diffusion-affected zone. Assumption of linear kinetics permits ready estimation of equilibration time for development of the quasi-steady burnoff profile. In addition, approximations for the time-steady hydrogen concentration profiles are developed for the case of oxidation by H2O. All cited methods can be readily evaluated by spreadsheet calculation.

  10. BNL ALARA Center: ALARA Notes, No. 9

    SciTech Connect

    Khan, T.A.; Xie, J.W.; Beckman, M.C.

    1994-02-01

    This issue of the Brookhaven National Laboratory`s Alara Notes includes the agenda for the Third International Workshop on ALARA and specific instructions on the use of the on-line fax-on-demand service provided by BNL. Other topics included in this issue are: (1) A discussion of low-level discharges from Canadian nuclear plants, (2) Safety issues at French nuclear plants, (3) Acoustic emission as a means of leak detection, (4) Replacement of steam generators at Doel-3, Beaznau, and North Anna-1, (5) Remote handling equipment at Bruce, (6) EPRI`s low level waste program, (7) Radiation protection during concrete repairs at Savannah River, (8) Reactor vessel stud removal/repair at Comanche Peak-1, (9) Rework of reactor coolant pump motors, (10) Restoration of service water at North Anna-1 and -2, (11) Steam generator tubing problems at Mihama-1, (12) Full system decontamination at Indian Point-2, (13) Chemical decontamination at Browns Ferry-2, and (14) Inspection methodolody in France and Japan.

  11. Consortium for Energy Efficiency (CEE) Notes_ Clothes Dryer Test Procedure

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Consortium for Energy Efficiency (CEE) Notes_ Clothes Dryer Test Procedure Consortium for Energy Efficiency (CEE) Notes_ Clothes Dryer Test Procedure CEE and DOE staff discussed the importance of relying on the DOE test method as the sole metric for efficiency and energy use reporting. CEE_Notes_ClothesDryerTestProcedure_25Apr2016 (352.34 KB) More Documents & Publications 2015-03-23 Issuance: Energy Conservation Standards for Residential Clothes Dryers; Request for

  12. Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles"" Workshop, December 10-11, 2009 Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels: Lessons ...

  13. West Flank Coso FORGE: well photos and notes

    SciTech Connect

    Doug Blankenship

    2015-12-21

    Photos and detailed down-hole lithology notes for wells CGEH-1 and 74-2 at the West Flank Coso, Ca FORGE location.

  14. State Energy Data System 2014 Consumption Technical Notes

    Annual Energy Outlook

    Consumption Technical Notes U.S. Energy Information Administration | State Energy Data 2014: Consumption 3 Purpose All of the estimates contained in the state energy consumption ...

  15. COLLOQUIUM - PLEASE NOTE SPECIAL DATE/TIME: The Magnetospheric...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    COLLOQUIUM - PLEASE NOTE SPECIAL DATETIME: The Magnetospheric MultiScale Mission Investigation of Magnetic Reconnection Professor Roy Torbert University of New Hampshire ...

  16. Residential Energy-Efficiency Equipment Shown to be a Good Investment for U.S. Navy (Fact Sheet), NREL (National Renewable Energy Laboratory)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Operated by the Alliance for Sustainable Energy, LLC NREL/FS-6A00-61218 * April 2014 National Renewable Energy Laboratory 15013 Denver West Parkway, Golden, CO 80401 303-275-3000 * www.nrel.gov Printed with a renewable-source ink on paper containing at least 50% wastepaper, including 10% post consumer waste. Residential Energy-Efficiency Equipment Shown to be a Good Investment for U.S. Navy A two-year project between the National Renewable Energy Laboratory (NREL) and the U.S. Navy's Naval

  17. Sandia Energy - PV Value

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PV Value Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Solar Market Transformation PV Value PV ValueTara Camacho-Lopez2015-06-12T20:36:38+00:0...

  18. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update

    Wellhead Value & Marketed Production Definitions Key Terms Definition Marketed Production Gross withdrawals less gas used for repressuring, quantities vented and flared, and nonhydrocarbon gases removed in treating or processing operations. Includes all quantities of gas used in field and processing plant operations. Production The volume of natural gas withdrawn from reservoirs less (1) the volume returned to such reservoirs in cycling, repressuring of oil reservoirs, and conservation

  19. Capacity Value of Concentrating Solar Power Plants

    SciTech Connect

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2011-06-01

    This study estimates the capacity value of a concentrating solar power (CSP) plant at a variety of locations within the western United States. This is done by optimizing the operation of the CSP plant and by using the effective load carrying capability (ELCC) metric, which is a standard reliability-based capacity value estimation technique. Although the ELCC metric is the most accurate estimation technique, we show that a simpler capacity-factor-based approximation method can closely estimate the ELCC value. Without storage, the capacity value of CSP plants varies widely depending on the year and solar multiple. The average capacity value of plants evaluated ranged from 45%?90% with a solar multiple range of 1.0-1.5. When introducing thermal energy storage (TES), the capacity value of the CSP plant is more difficult to estimate since one must account for energy in storage. We apply a capacity-factor-based technique under two different market settings: an energy-only market and an energy and capacity market. Our results show that adding TES to a CSP plant can increase its capacity value significantly at all of the locations. Adding a single hour of TES significantly increases the capacity value above the no-TES case, and with four hours of storage or more, the average capacity value at all locations exceeds 90%.

  20. VALUE STUDY | Department of Energy

    Energy.gov [DOE] (indexed site)

    VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual...

  1. Notes on a New Coherence Estimator

    SciTech Connect

    Bickel, Douglas L.

    2016-01-01

    This document discusses some interesting features of the new coherence estimator in [1] . The estimator is d erived from a slightly different viewpoint. We discuss a few properties of the estimator, including presenting the probability density function of the denominator of the new estimator , which is a new feature of this estimator . Finally, we present an appr oximate equation for analysis of the sensitivity of the estimator to the knowledge of the noise value. ACKNOWLEDGEMENTS The preparation of this report is the result of an unfunded research and development activity. Sandia National Laboratories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL85000.

  2. VALUE STUDY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    VALUE STUDY VALUE STUDY PDF icon VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual

  3. PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    May 23, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies - "Big Data at the Pittsburgh Supercomputing Center" ...

  4. Imputed Wellhead Value of Natural Gas Marketed Production

    Energy Information Administration (EIA) (indexed site)

    Thousand Dollars) Data Series: Quantity of Production Imputed Wellhead Value Wellhead Price Marketed Production Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2009 2010 2011 2012 2013 2014 View History U.S. 1989-2006 Alabama 1,020,599 994,688 0 0 0 0 1989-2014 Alaska 1,163,554 1,185,249 0 0 0 0 1989-2014 Arizona 2,269 753 0 0 0 0 1989-2014 Arkansas 2,330,692 3,556,609 0 0 0 0

  5. PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0:00 Discussion notes: PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: We hear that the ... PVMRW2013 Discussion notes: Tues. Feb. 26: 10:45 PVMRW2013 Wed., Feb. 27, 1:45 Discussion ...

  6. PVMRW2013 Wed., Feb. 27, 1:45 Discussion notes | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1:45 Discussion notes PVMRW2013 Wed., Feb. 27, 1:45 Discussion notes It could be useful to ... More Documents & Publications PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: PVMRW2013 ...

  7. Hanford Advisory Board Values

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of work are fundamental core values. Workers should receive appropriate training and programs should be in place to ensure a safety-conscious work environment, without...

  8. High coking value pitch

    SciTech Connect

    Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

    2014-06-10

    A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

  9. Federal Utility Partnership Working Group Meeting Notes | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Meeting Notes Federal Utility Partnership Working Group Meeting Notes Spring 2013 Meeting Report (510.93 KB) Fall 2012 Meeting Report (606.19 KB) Spring 2012 Meeting Report (307.53 KB) Fall 2011 Meeting Report (242.64 KB) Spring 2011 Meeting Report (192.73 KB) Fall 2010 Meeting Report (142.42 KB) Spring 2009 Meeting Report (137.93 KB) Fall 2008 Meeting Report (230.19 KB) Fall 2007 Meeting Report (215.46 KB) Spring 2007 Meeting Report (91.39 KB) Fall 2006 Meeting Report (125.64 KB)

  10. VALUE ENGINEERING.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    6 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS FOLLOW-ON INSPECTION OF THE DEPARTMENT OF ENERGY'S VALUE ENGINEERING PROGRAM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 20, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Follow-on Inspection of the Department of Energy's Value Engineering Program" BACKGROUND Value Engineering is a

  11. Photovoltaics Value Analysis

    SciTech Connect

    Contreras, J.L.; Frantzis, L.; Blazewicz, S.; Pinault, D.; Sawyer, H.

    2008-02-01

    The goals of this report are to identify best practices in methodologies for estimating the value of distributed PV technologies, identify gaps in existing knowledge, and outline R&D opportunities.

  12. Value of Information References

    DOE Data Explorer

    Morency, Christina

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  13. Value of Information References

    DOE Data Explorer

    Morency, Christina

    2014-12-12

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  14. Earned Value Management

    Energy.gov [DOE]

    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the...

  15. HSEP Value Statement

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7/9/2012 HSEP Value Statement Safe and environmentally conscious performance of work is our fundamental core value. Integrated Safety Management should be used as the principal vehicle to protect the worker and the environment, and to guide work planning of all types. This includes practicing the proper principles of behavior conducive to a positive safety culture and incorporating safety and environmental risk identification and mitigation in facility designs. Workers should receive appropriate

  16. A note on entropic force and brane cosmology

    SciTech Connect

    Ling, Yi; Wu, Jian-Pin E-mail: jianpinwu@yahoo.com.cn

    2010-08-01

    Recently Verlinde proposed that gravity is an entropic force caused by information changes when a material body moves away from the holographic screen. In this note we apply this argument to brane cosmology, and show that the cosmological equation can be derived from this holographic scenario.

  17. Tribal Consultation and Stakeholder Outreach Meeting Notes and Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Strategy on the Arctic Region (NSAR) - Ten Year Renewable Energy Strategy Tribal Consultation and Stakeholder Outreach Meeting Notes and Analysis Prepared by Denali Daniels and Associates, Inc. Fall 2014 Office of Indian Energy Table o f C ontents Executive S ummary .............................................................................................................................................. 2 --- 6 Background

  18. Notes on the Langevin model for turbulent diffusion of ``marked`` particles

    SciTech Connect

    Rodean, H.C.

    1994-01-26

    Three models for scalar diffusion in turbulent flow (eddy diffusivity, random displacement, and on the Langevin equation) are briefly described. These models random velocity increment based Fokker-Planck equation is introduced as are then examined in more detail in the reverse order. The Fokker-Planck equation is the Eulerian equivalent of the Lagrangian Langevin equation, and the derivation of e outlined. The procedure for obtaining the deterministic and stochastic components of the Langevin equation from Kolmogorov`s 1941 inertial range theory and the Fokker-Planck equation is described. it is noted that a unique form of the Langevin equation can be determined for diffusion in one dimension but not in two or three. The Langevin equation for vertical diffusion in the non-Gaussian convective boundary layer is presented and successively simplified for Gaussian inhomogeneous turbulence and Gaussian homogeneous turbulence in turn. The Langevin equation for Gaussian inhomogeneous turbulence is mathematically transformed into the random displacement model. It is shown how the Fokker-Planck equation for the random displacement model is identical in form to the partial differential equation for the eddy diffusivity model. It is noted that the Langevin model is applicable in two cases in which the other two are not valid: (1) very close in time and distance to the point of scalar release and (2) the non-Gaussian convective boundary layer. The two- and three-dimensional cases are considered in Part III.

  19. Value of Information spreadsheet

    DOE Data Explorer

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Júlíusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  20. Value of Information spreadsheet

    DOE Data Explorer

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  1. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of September 19, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green = Yes Red = No Carlsbad Field Office (Carlsbad, NM) Waste Isolation Pilot Project Management and Operations Contract (Note 1) Nuclear Waste Partnership, LLC URS Energy and Construction, Inc. Babcock & Wilcox Technical Services Group, LLC AREVA Federal Services, LLC Savannah River (Aiken, SC) Salt Waste

  2. LLW Notes, Volume 9, Number 6. October 1994

    SciTech Connect

    1994-10-01

    LLW Notes is distributed to Low-Level Radioactive Waste Forum Participants and other state and compact officials identified by those Participants to receive LLW Notes. The Low-Level Radioactive Waste Forum is an association of state and compact representatives appointed by governors and compact commissions, established to facilitate state and compact commission implementation of the Low- Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  3. Application note : using open source schematic capture tools with Xyce.

    SciTech Connect

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  4. SUV: Standard uptake or silly useless value?

    SciTech Connect

    Keyes, J.W. Jr.

    1995-10-01

    Quantification has always held a pervasive allure for nuclear medicine. There is a sense that anything that can be quantified should be. Once we have the numbers in hand, there is a mysterious tendency to accord them special value. Why this should be the case is unclear. Perhaps it is because of the functional nature of nuclear medicine studies, which seem as if they should be quantified. Perhaps it is because it is so easy to extract numbers from our studies. Whatever the cause, the phenomenon has been particularly strong in PET, in which we hear at every turn that PET is {open_quotes}quantitative.{close_quotes} DiChiro and Brooks commented on this phenomenon years ago, noting that, in many applications, subjective interpretation of PET images is actually superior to the use of quantitative data. Undaunted, however, the field has continued to lean heavily toward numbers as the final arbiter of correctness. 15 refs., 2 tabs.

  5. Core Values | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Core Values What we do and how we do it is determined by our core values. Our core values are how we operate and what we value most. They are the qualities that define our culture...

  6. Social Values | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Social Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleSocialValues&oldid612345...

  7. Economic Values | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Economic Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleEconomicValues&oldid612356...

  8. The value of volunteering

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    volunteering Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit The value of volunteering Volunteers help fill gaps in staffing at regional nonprofits March 1, 2016 Betty Ehart Senior Center staffer Susie Eash challenges Pat Day on their daily match of "Aggravation." Betty Ehart Senior Center staffer Susie Eash challenges Pat Day on their daily match of Aggravation. Contacts

  9. Value Study Desk Manual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PREPARED FOR: DEPARTMENT OF ENERGY Office of Contractor Human Resources Policy Division September 26, 2012 UPDATE VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 28, 2008 Update Prepared for: DOE By: Aon Hewitt Inc. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 26, 2012

  10. MICROBOONE-NOTE-1008-PUB Michel Electron Reconstruction Using

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8-PUB Michel Electron Reconstruction Using the MicroBooNE LArTPC Cosmic Data The MicroBooNE Collaboration August 25, 2016 Abstract MicroBooNE is a Liquid Argon Time Projection Chamber (LArTPC) neutrino detector located in the Booster Neutrino Beamline at Fermilab which began collecting neutrino data in October 2015. MicroBooNE aims to explore the low-energy excess in the ν e spectrum reported by MiniBooNE as well as perform ν-Ar cross-section measurements. In this note, we present the current

  11. COLLOQUIUM: NOTE SPECIAL DATE - THURSDAY: Unique Vulnerability of the New

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    York/New Jersey Metro Region to Hurricane Destruction - A New Perspective Based on Recent Research on Irene 2011 and Sandy 2012 | Princeton Plasma Physics Lab February 28, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: NOTE SPECIAL DATE - THURSDAY: Unique Vulnerability of the New York/New Jersey Metro Region to Hurricane Destruction - A New Perspective Based on Recent Research on Irene 2011 and Sandy 2012 Professor Nicholas K. Coch Queens College CUNY In the last two years. the

  12. V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis...

  13. U.S. Department of Energy Onboard Storage Tank Workshop Notes | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Onboard Storage Tank Workshop Notes U.S. Department of Energy Onboard Storage Tank Workshop Notes These notes and action items were derived from the Onboard Storage Tank Workshop on April 29, 2010. workshop_notes_ostw.pdf (108.08 KB) More Documents & Publications DOE Vehicular Tank Workshop Agenda Hydrogen Tank Testing R&D Developing SAE Safety Standards for Hydrogen and Fuel Cell Vehicles (FCVs)

  14. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value PV Value PV Value Sandia National Laboratories has developed a prospective model of determining the value of PV. Sandia uses an income capitalization approach, which considers the present value of future energy production to determine the remaining value of a PV system. An online tool developed by Energy Sense Finance, has been released to the public. https://www.pvvalue.com/ PV Value (332.15 KB) More Documents & Publications PV Value® Reduce Risk, Increase Clean Energy: How States

  15. The value of money

    SciTech Connect

    Rudd, M.S.

    1995-12-01

    Today, more than ever before, power plant engineers find themselves in a new arena of competition. It is no longer enough to address the technical problems. Today is also an era of financial competition. This is not just competition in the sense of {open_quotes}the enemy out there{close_quotes}. Engineers are competing with a myriad of other good projects within their own company for precious budget dollars. Utility budget scrutiny is increasing every year. To be successful, engineers have to be prepared to justify their projects in clear, measurable terms that withstand management`s scrutiny. Today`s engineer is faced with a technical and financial challenge and must be prepared if he or she is to succeed. This paper addresses methods used at the Northern Indiana Public Service Company for justification of feedwater heater replacements. Though only a suggested method; it is nonetheless a method that has worked well. This paper covers how a feedwater heater replacement is evaluated, from the identified need to the proposed solution. Expectations are defined. Realistic assessments are made. Measurement criteria is established, in advance. Responsibility is assigned. The project is evaluated on its technical and financial merits, reflecting today`s {open_quotes}value of money{close_quotes}.

  16. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book

    7 Buildings Design and Construction Trades, by Year | | | 1980 | 1982 14.4 1990 | 1987 38.4 2000 (4) | 1992 36.3 2005 | 1997 46.6 2006 | 2002 95.4 2007 | 2007 52.4 2008 | 2009 | 2010 | Note(s): Source(s): 1) Does not include industrial building or heavy construction (e.g., dam and bridge building). In 1999, 76% of the employment shown is considered for "production." The entire U.S. construction industry employs an estimated 10 million people, including manufacturing. 2) In 2000, NAHB

  17. V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Attacks | Department of Energy 9: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks August 28, 2013 - 6:00am Addthis PROBLEM: Several vulnerabilities were reported in IBM Lotus iNotes PLATFORM: IBM Lotus iNotes 8.5.x ABSTRACT: IBM Lotus iNotes 8.5.x contains four cross-site scripting vulnerabilities REFERENCE LINKS: Security Tracker Alert ID 1028954 IBM Security Bulletin 1647740

  18. V-211: IBM iNotes Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1: IBM iNotes Multiple Vulnerabilities V-211: IBM iNotes Multiple Vulnerabilities August 5, 2013 - 6:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Lotus iNotes PLATFORM: IBM iNotes 9.x ABSTRACT: IBM iNotes has two cross-site scripting vulnerabilities and an ActiveX Integer overflow vulnerability REFERENCE LINKS: Secunia Advisory SA54436 IBM Security Bulletin 1645503 CVE-2013-3027 CVE-2013-3032 CVE-2013-3990 IMPACT ASSESSMENT: High DISCUSSION: 1) Certain input related

  19. Doppler electron velocimetry : notes on creating a practical tool.

    SciTech Connect

    Reu, Phillip L.; Milster, Tom

    2008-11-01

    The Doppler electron velocimeter (DEV) has been shown to be theoretically possible. This report attempts to answer the next logical question: Is it a practical instrument? The answer hinges upon whether enough electrons are available to create a time-varying Doppler current to be measured by a detector with enough sensitivity and bandwidth. The answer to both of these questions is a qualified yes. A target Doppler frequency of 1 MHz was set as a minimum rate of interest. At this target a theoretical beam current signal-to-noise ratio of 25-to-1 is shown for existing electron holography equipment. A detector is also demonstrated with a bandwidth of 1-MHz at a current of 10 pA. Additionally, a Linnik-type interferometer that would increase the available beam current is shown that would offer a more flexible arrangement for Doppler electron measurements over the traditional biprism.

  20. PHENIX WBS notes. Cost and schedule review copy

    SciTech Connect

    Not Available

    1994-02-01

    The Work Breakdown Structure (WBS) Book begins with this Overview section, which contains the high-level summary cost estimate, the cost profile, and the global construction schedule. The summary cost estimate shows the total US cost and the cost in terms of PHENIX construction funds for building the PHENIX detector. All costs in the WBS book are shown in FY 1993 dollars. Also shown are the institutional and foreign contributions, the level of pre-operations funding, and the cost of deferred items. Pie charts are presented at PHENIX WBS level 1 and 2 that show this information. The PHENIX construction funds are shown broken down to PHENIX WBS level 3 items per fiscal year, and the resulting profile is compared to the RHIC target profile. An accumulated difference of the two profiles is also shown. The PHENIX global construction schedule is presented at the end of the Overview section. Following the Overview are sections for each subsystem. Each subsystem section begins with a summary cost estimate, cost profile, and critical path. The total level 3 cost is broken down into fixed costs (M&S), engineering costs (EDIA) and labor costs. Costs are further broken down in terms of PHENIX construction funds, institutional and foreign contributions, pre-operations funding, and deferred items. Also shown is the contingency at level 3 and the level 4 breakdown of the total cost. The cost profile in fiscal years is shown at level 3. The subsystem summaries are followed by the full cost estimate and schedule sheets for that subsystem. These detailed sheets are typically carried down to level 7 or 8. The cost estimate Total, M&S, EDIA, and Labor breakdowns, as well as contingency, for each WBS entry.

  1. Note on Inverse Bremsstrahlung in a Strong Electromagnetic Field

    DOE R&D Accomplishments

    Bethe, H. A.

    1972-09-01

    The collisional energy loss of an electron undergoing forced oscillation in an electromagnetic field behaves quite differently in the low and high intensity limits. ... It is shown that in the case of an electromagnetic field v {sub o} >> v {sub t} the rate of transfer is much slower, and actually decreases with the strength of the field.

  2. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value is a web-based tool that calculates the energy production value for a residential or commercial photovoltaic (PV) system. The tool is Uniform Standards of Progressional ...

  3. CEM_Metrics_and_Technical_Note_7_14_10.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CEM_Metrics_and_Technical_Note_7_14_10.pdf CEM_Metrics_and_Technical_Note_7_14_10.pdf (129.47 KB) More Documents & Publications SEAD-Fact-Sheet.pdf Schematics of a heat pump clothes dryer<br /> Credit: Oak Ridge National Lab Heat Pump Clothes Dryer CEM_Metrics_and_Technical_Note_7_14_10.pdf Wind Vision: A New Era for Wind Power in the United States

  4. Calibration of the HAO standard opal filter set. Technical note

    SciTech Connect

    Streete, J.L.

    1989-10-01

    Solar radiation attenuators called opal filters have been used for several decades to calibrate photographic film in instruments used to measure the brightness of the solar corona. The primary component used in fabricating these filters is opal glass. New measurements of the transmittance of the HAO fundamental standard set of opal filters were begun in September, 1988. Since nearly two decades had passed from the time of the last calibration measurements, there was concern that the transmittance of the filters might have changed. Another motivation for recalibrating the opal filters was the desire to know the transmittance values in spectral regions above and below those used in 1970. The spectral regions chosen were 450 nm, 550 nm, 650 nm and 800 nm. Comparisons of transmittance are made with the previous values, and new transmittance values are given.

  5. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book

    3 Value of Building Improvements and Repairs Relative to GDP, by Year ($2010 Billion) (1) GDP 1980 N.A. 1985 (2) 4.2% 1990 (3) 3.9% 1995 3.5% 2000 3.0% 2006 3.6% 2007 3.7% Note(s): Source(s): 235.7 259.8 495.5 13,354.9 1) Improvements includes additions, alterations, reconstruction, and major replacements. Repairs include maintenance. 2) 1986. 3) 1989. DOC, Expenditures for Residential Improvements and Repairs by Property Type, Quarterly, May 2005 for 1980-1990; DOC, Expenditures for Residential

  6. Quantum physics and human values

    SciTech Connect

    Stapp, H.P.

    1989-09-01

    This report discusses the following concepts: the quantum conception of nature; the quantum conception of man; and the impact upon human values. (LSP).

  7. The value of energy data

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The value of energy data DOE SSL Program Connected Lighting Meeting November 16, 2015 2 ... methods, passfail criteria 13 DOE SSL Program activities: energy reporting Based ...

  8. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-03-13

    This Guide provides approaches for implementing the Earned Value Management System (EVMS) requirements of DOE O 413.3B. Supersedes DOE G 413.3-10.

  9. EnPI V4.0 Release Notes and Known Issues | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    notes and known issues for the Energy Performance Indicator (EnPI) Tool v4.0. EnPI Release Notes and Known Issues (101.66 KB) More Documents & Publications EnPI V4.0 User Manual

  10. D-Zero Central Calorimeter Pressure Vessel and Vacuum Vessel Safety Notes

    SciTech Connect

    Rucinski, R.; Luther, R.; /Fermilab

    1990-10-25

    The relief valve and relief piping capacity was calculated to be 908 sefm air. This exceeds all relieving conditions. The vessel also has a rupture disc with a 2640 scfm air stamped capacity. In order to significantly decrease the amount of time required to fill the cryostats, it is desired to raise the setpoint of the 'operating' relief valve on the argon storage dewar to 20 psig from its existing 16 psig setting. This additional pressure increases the flow to the cryostats and will overwhelm the relief capacity if the temperature of the modules within these vessels is warm enough. Using some conservative assumptions and simple calculations within this note, the maximum average temperature that the modules within each cryostat can be at prior to filling from the storage dewar with liquid argon is at least 290 K. The average temperature of the module mass for any of the three cryostats can be as high as 290 K prior to filling that particular cryostat. This should not be confused with the average temperature of a single type or location which is useful in protecting the modules-not necessarily the vessel itself. A few modules of each type and at different elevations should be used in an average which would account for the different weights of each module. Note that at 290 K, the actual flow of argon through the relief valve and the rupture disk was under the maximum theoretical flows for each relief device. This means that the bulk temperature could actually have been raised to flow argon through the reliefs at their maximum capacity. Therefore, the temperature of 290 K is a conservative value for the calculated flow rate of 12.3 gpm. Safeguards in addition to and used in conjunction with operating procedures shall be implemented in such a way so that the above temperature limitation is not exceeded and such that it is exclusive of the programmable logic controller (PLC). One suggestion is using a toggle switch for each cryostat mounted in the PLC I/O box which

  11. SEPARATION OF SCANDIUM VALUES FORM IRON VALUES BY SOLVENT EXTRACTION

    DOEpatents

    Kuhlman, C.W. Jr.; Lang, G.P.

    1961-12-19

    A process is given for separating scandium from trivalent iron values. In this process, an aqueous nitric acid solution is contacted with a water- immiscible alkyl phosphate solution, the aqueous solution containing the values to be separated, whereby the scandium is taken up by the alkyl phosphate. The aqueous so1ution is preferably saturated with magnesium nitrate to retain the iron in the aqueous solution. (AEC)

  12. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-03-13

    To support DOE's initiatives to improve program, project, and contract management through the implementation and surveillance of a contractor's Earned Value Management System (EVMS) that is in conformance with DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, the American National Standards Institute/Electronic Industries Alliance (ANSI/EIA)-748-B, Earned Value Management System (or as required by contract), and Federal Acquisition Regulation (FAR) 52.234-4, Earned Value Management System (EVMS). Admin Chg 1 dated 10-22-2015.

  13. CMI Values | Critical Materials Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Values CMI Values -- we listen, we are safe, we collaborate, we respect, we move fast, we are agile, we are responsible, and we deliver. We Listen: We are driven by the needs of technology and our best information comes from our industry partners. We Are Safe: We conduct all of our work in a manner that protects our workers, the public and the environment. We Collaborate: We bring together the best available expertise to solve the problems at hand. We Respect: We treat each other well and value

  14. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2008-05-06

    The Guide supports the Departments initiatives to improve program, project, and contract management through the implementation and surveillance of contractors earned value management systems. Canceled by DOE G 413.3-10A.

  15. Core Values | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Core Values Core Values People - People are our most important resource. We respect and use our experience and skills and appreciate our diversity. Business Excellence - We are fiscally responsible and actively pursue best business practices. Safety - We protect our human and material resources and promote safe work practices within the office and at our sites. Communication - We take full advantage of our virtual organization's strengths and share information freely across all levels of the

  16. Calculation notes that support accident scenario and consequence determination of a waste tank criticality

    SciTech Connect

    Crowe, R.D., Westinghouse Hanford

    1996-08-02

    The purpose of this calculation note is to provide the basis forcriticality consequences for the Tank Farm Safety Analysis Report(FSAR). Criticality scenario is developed and details and description of the analysis methods are provided.

  17. Calculation notes that support accident scenario and consequence of the evaporator dump

    SciTech Connect

    Crowe, R.D., Westinghouse Hanford

    1996-09-09

    The purpose of this calculation note is to provide the basis for evaporator dump consequence for the Tank Farm Safety Analysis Report (FSAR). Evaporator Dump scenario is developed and details and description of the analysis methods are provided.

  18. Calculation notes that support accident scenario and consequence of the evaporator dump

    SciTech Connect

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for evaporator dump consequence for the Tank Farm Safety Analysis Report (FSAR). Evaporator Dump scenario is developed and details and description of the analysis methods are provided.

  19. Calculation notes that support accident scenario and consequence determination of a waste tank criticality

    SciTech Connect

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for criticality consequences for the Tank Farm Safety Analysis Report (FSAR). Criticality scenario is developed and details and description of the analysis methods are provided.

  20. L3: RTM.MCH.P6.02 Technical Note RNSD-00-

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Oak Ridge National Laboratory April 5, 2013 CASL-U-2014-0083-000 Technical Note Reactor and Nuclear Systems Division Radiation Transport Group From: Tom Evans, Steven Hamilton ...

  1. Publisher's Note: New mechanism for the top-bottom mass hierarchy...

    Office of Scientific and Technical Information (OSTI)

    New mechanism for the top-bottom mass hierarchy Phys. Rev. D 70, 055006 (2004) Citation Details In-Document Search Title: Publisher's Note: New mechanism for the top-bottom mass ...

  2. Photovoltaics Value Clearinghouse | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Photovoltaics Value Clearinghouse Jump to: navigation, search The Photovoltaics Value Clearinghouse was developed by NREL and Clean Power Research.1 The PV Value Clearinghouse is...

  3. Geothermal Industry Ends 2012 on a High Note | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Industry Ends 2012 on a High Note Geothermal Industry Ends 2012 on a High Note December 18, 2012 - 12:14pm Addthis Year-end highlights include new domestic projects, international development and policy benchmarks Washington, D.C. - The past 12 months saw continued economic challenges for many American industries, including those in the renewable energy field, but the country's geothermal community witnessed a year of growth, both domestically and abroad. The Geothermal Energy Association (GEA)

  4. The art and science of magnet design: Selected notes of Klaus Halbach. Volume 2

    SciTech Connect

    1995-02-01

    This volume contains a compilation of 57 notes written by Dr. Klaus Halbach selected from his collection of over 1650 such documents. It provides an historic snapshot of the evolution of magnet technology and related fields as the notes range from as early as 1965 to the present, and is intended to show the breadth of Dr. Halbach`s interest and ability that have long been an inspiration to his many friends and colleagues. As Halbach is an experimental physicist whose scientific interests span many areas, and who does his most innovative work with pencil and paper rather than at the workbench or with a computer, the vast majority of the notes in this volume were handwritten and their content varies greatly--some reflect original work or work for a specific project, while others are mere clarifications of mathematical calculations or design specifications. As the authors converted the notes to electronic form, some were superficially edited and corrected, while others were extensively re-written to reflect current knowledge and notation. The notes are organized under five categories which reflect their primary content: Beam Position Monitors, (bpm), Current Sheet Electron Magnets (csem), Magnet Theory, (thry), Undulators and Wigglers (u-w), and Miscellaneous (misc). Within the category, they are presented chronologically starting from the most recent note and working backwards in time.

  5. Phased-array ultrasonic surface contour mapping system. Technical note

    SciTech Connect

    Fasching, G.E.; Loudin, W.J.; Paton, D.E.; Smith, N.S. Jr.

    1992-11-01

    The development of reliable mechanistic models for prediction of conventional and fluidized-bed combustor and gasifier operation and solids flow behavior in silos or other solids handling and storage components requires knowledge of the contained solids flow characteristics. This knowledge is gained from dynamic experimental measurements of bed top surface contours in addition to measurements of bulk bed properties. The surface contour mapping system (SCMS) provides a means of generating surface contour maps in real time with a unique, automatically focused, density-compensated, digital phased-array scanning, ultrasonic-range measurement system. The system is designed to operate in environments having gas temperatures up to 1,600 {degree}F and pressures to 1,000 psig. Computer simulation of several SCMS candidates and acoustic carrier modulation techniques indicates that a surface measurement resolution of {plus_minus}2 inches over a range of 5 to 20 feet distance between the transmit/receive (T/R) transducers and the bed surface can be expected. The simulation of a particular design, a 9-T/R, 25-pixel bed surface, in which the level of each pixel was randomly set between 5 and 7 feet below the plane of the T/R transducers, then measured using two different modulation techniques, produced excellent results. The simulation of this surface contour mapping system determined the value of the level of each of the 25 pixels to within {plus_minus}1 inch for over 95 percent of more than 100 test cases for one of the modulation techniques, and for over 99 percent of about 100 test cases for a second modulation technique. A hardware implementation of the design simulated but using only a two-T/R, three-pixel SCMS produced results very closely approximating those obtained during the simulation.

  6. Core Values Postcard | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Core Values Postcard Document Number: NA Effective Date: 09/2014 File (public): PDF icon Print_CoreValuesPostcard

  7. Process for recovering actinide values

    DOEpatents

    Horwitz, E. Philip; Mason, George W.

    1980-01-01

    A process for rendering actinide values recoverable from sodium carbonate scrub waste solutions containing these and other values along with organic compounds resulting from the radiolytic and hydrolytic degradation of neutral organophosphorous extractants such as tri-n butyl phosphate (TBP) and dihexyl-N,N-diethyl carbamylmethylene phosphonate (DHDECAMP) which have been used in the reprocessing of irradiated nuclear reactor fuels. The scrub waste solution is preferably made acidic with mineral acid, to form a feed solution which is then contacted with a water-immiscible, highly polar organic extractant which selectively extracts the degradation products from the feed solution. The feed solution can then be processed to recover the actinides for storage or recycled back into the high-level waste process stream. The extractant is recycled after stripping the degradation products with a neutral sodium carbonate solution.

  8. Value Study Desk Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Value Study Desk Manual Value Study Desk Manual Updated September 26, 2012. Memo from Robert Myers regarding DOE Benefit Value Desk Manual (56.76 KB) Value Study Desk Manual (1005.83 KB) More Documents & Publications Contractor Human Resources Management VALUE STUDY VALUE STUDY

  9. ADSORPTION METHOD FOR SEPARATING THORIUM VALUES FROM URANIUM VALUES

    DOEpatents

    Boyd, G.E.; Russell, E.R.; Schubert, J.

    1959-08-01

    An improved ion exchange method is described for recovery of uranium and thorium values as separate functions from an aqueous acidic solution containing less than 10/sup -3/ M thorium ions and between 0.1 and 1 M uranyl ions. The solution is passed through a bed of cation exchange resin in the acid form to adsorb all the thorium ions and a portion of the uranyl ions. The uranium is eluted by means of aqueous 0.1 to 0.4 M sulfuric acid. The thorium may then be stripped from the resin by elution with aqueous 0.5 M oxalic acid.

  10. Shale Oil Value Enhancement Research

    SciTech Connect

    James W. Bunger

    2006-11-30

    Raw kerogen oil is rich in heteroatom-containing compounds. Heteroatoms, N, S & O, are undesirable as components of a refinery feedstock, but are the basis for product value in agrochemicals, pharmaceuticals, surfactants, solvents, polymers, and a host of industrial materials. An economically viable, technologically feasible process scheme was developed in this research that promises to enhance the economics of oil shale development, both in the US and elsewhere in the world, in particular Estonia. Products will compete in existing markets for products now manufactured by costly synthesis routes. A premium petroleum refinery feedstock is also produced. The technology is now ready for pilot plant engineering studies and is likely to play an important role in developing a US oil shale industry.

  11. Sharing values, sharing a vision

    SciTech Connect

    Not Available

    1993-12-31

    Teamwork, partnership and shared values emerged as recurring themes at the Third Technology Transfer/Communications Conference. The program drew about 100 participants who sat through a packed two days to find ways for their laboratories and facilities to better help American business and the economy. Co-hosts were the Lawrence Livermore National Laboratory and the Lawrence Berkeley Laboratory, where most meetings took place. The conference followed traditions established at the First Technology Transfer/Communications Conference, conceived of and hosted by the Pacific Northwest Laboratory in May 1992 in Richmond, Washington, and the second conference, hosted by the National Renewable Energy Laboratory in January 1993 in Golden, Colorado. As at the other conferences, participants at the third session represented the fields of technology transfer, public affairs and communications. They came from Department of Energy headquarters and DOE offices, laboratories and production facilities. Continued in this report are keynote address; panel discussion; workshops; and presentations in technology transfer.

  12. Samsung recalls 1M Samsung Galazy Note 7 phones > EMC2 News > The Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Materials Center at Cornell Samsung recalls 1M Samsung Galazy Note 7 phones September 15th, 2016 › Jon Swartz, USA TODAY 8:48 p.m. EDT September 15, 2016 SAN FRANCISCO - Samsung has officially recalled 1 million of its Galaxy Note 7 phones sold before Sept. 15 because of "serious fire and burn hazards." The electronics giant made the announcement during a conference call with the U.S. Consumer Product Safety Commission late Thursday. Samsung says it received 92 reports of

  13. A note from Howard H. Baker, Jr. | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    A note from Howard H. ... A note from Howard H. Baker, Jr. Posted: February 11, 2013 - 3:49pm | Y-12 Report | Volume 9, Issue 2 | 2013 "I remember visiting Oak Ridge at the height of its construction. The town had grown up out of corn fields in super secrecy. My dad and I didn't know its purpose, but we knew it involved important, vital work. That vitally important work continues today. For 70 years Y-12, in particular, has served the nation as a reservoir of talent and insight. The very

  14. Chapter 48 - Value Engineering | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8 - Value Engineering Chapter 48 - Value Engineering PDF icon 48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology...

  15. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Earned Value Management Earned Value Management Earned Value Management The mission of the DOE Earned Value Management website is to educate and train on theory and practice of Earned Value Management, and use it as an integrated Project Management process. Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the government and contractors the ability to examine

  16. OTS NOTE

    Office of Legacy Management (LM)

    2, 1990 TO: W. Alexander Williams FROM: Don Mackenzie &d> SUBJECT: Elimination of 3 Facilities from FUSRAP Enclosed are elimination recommendations for Vitro Chemical Co.,...

  17. OTS NOTE

    Office of Legacy Management (LM)

    January 15, 1991 TO: Alexander Williams FROM: Dan Stout@ SUBJECT: Gruen Watch Company Consideration Recommendation Attached for your review is a consideration recommendation for...

  18. Explanatory Notes

    Energy Information Administration (EIA) (indexed site)

    data at a State level on 14 petroleum products for various retail and wholesale marketing categories. The Form EIA-782B collects resellerretailer monthly price and volume...

  19. EDITORS NOTE:

    Office of Environmental Management (EM)

    ... and accelerating dismantlement of the Cold War stockpile. * Transform the current ... to advance the knowledge of plasma and fusion energy sciences to the point where a ...

  20. OTS NOTE

    Office of Legacy Management (LM)

    The attached memorandum and supporting documents are the basis for our recommendation to ... No documents have been discovered to date which specifically indicate use or handling of ...

  1. OTS NOTE

    Office of Legacy Management (LM)

    The attached memorandum and supporting documents are the basis for our recommendation to ... Documents discovered to date indicating use or handling of radioactive material by the ...

  2. OTS NOTE

    Office of Legacy Management (LM)

    The attached memorandum and supporting documents are the basis for our recommendation to ... Documents discovered to date indicating use or handling of radioactive material by ...

  3. OTS NOTE

    Office of Legacy Management (LM)

    ... It is proposed that the Commission pay 4. 50 per pound of contained uranium oxide (U3C31, such pay- .ment to be in addition to a price, f. o. b. Chattanooga, TZM. , of 4. 25 per ...

  4. Explanatory Notes

    Energy Information Administration (EIA) (indexed site)

    complete enumera- tion has the same nonsampling errors as the sample survey. The sampling error, or standard error of the estimate, is a measure of the variability among the...

  5. OTS NOTE

    Office of Legacy Management (LM)

    FUSRAP NJ.18 Exxon Research and Engineering Company The Former Standard Oil Development Company Linden, New Jersey Site Function In the spring of 1942, Standard Oil Development ...

  6. Effects of differential compaction fracturing shown in four reservoirs

    SciTech Connect

    Thomas, G.E. )

    1992-02-03

    With the advent of horizontal drilling in the U.S., fractured reservoirs have become a major target in the ongoing search for hydrocarbons. This paper will examine four fractured-reservoir fields in the U.S.: Silo (Niobrara), Wyoming; Elkhorn Ranch (Bakken), North Dakota; Pearsal (Austin chalk), Texas; and the Syndicated Options Ltd. 9372 Ferguson Brothers well (Ordovician carbonates), Kentucky. The paper will show that differential compaction fracturing is more of a major factor in long-term, sustainable production in a fractured reservoir than is tectonic fracturing. In this paper, a general discussion of the two types of fracturing and how they affect reservoir production is provided.

  7. Regular oscillations and random motion of glass microspheres levitated by a single optical beam in air: Publisher’s note

    DOE PAGES [OSTI]

    Moore, Jeremy; Martin, Leopoldo L.; Maayani, Shai; Kim, Kyu Hyun; Chandrahalim, Hengky; Eichenfield, Matt; Martin, Inocencio R.; Carmon, Tal

    2016-02-19

    The publisher’s note amends a recent publication [Opt. Express 24(3), 2850–2857 (2016)] to include Acknowledgments.

  8. Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    [Read-Only] | Department of Energy DOE O 413 3B Brief v9 with key points in notes [Read-Only] Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] (2.08 MB) More Documents & Publications Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] CD-2, Approve Performance Baseline External Independent Review (EIR) Standard Operating Procedure (SOP)

  9. Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles"" Workshop, December 10-11, 2009

    Office of Energy Efficiency and Renewable Energy (EERE)

    These notes provide information about the Compressed Natural Gas and Hydrogen Fuels workshop in December 2009.

  10. DEVELOPMENT OF VADOSE-ZONE HYDRAULIC PARAMETER VALUES

    SciTech Connect

    ROGERS PM

    2008-01-21

    Several approaches have been developed to establish a relation between the soil-moisture retention curve and readily available soil properties. Those relationships are referred to as pedotransfer functions. Described in this paper are the rationale, approach, and corroboration for use of a nonparametric pedotransfer function for the estimation of soil hydraulic-parameter values at the yucca Mountain area in Nevada for simulations of net infiltration. This approach, shown to be applicable for use at Yucca Mountain, is also applicable for use at the Hanford Site where the underlying data were collected.

  11. Graphics processing units accelerated semiclassical initial value representation molecular dynamics

    SciTech Connect

    Tamascelli, Dario; Dambrosio, Francesco Saverio; Conte, Riccardo; Ceotto, Michele

    2014-05-07

    This paper presents a Graphics Processing Units (GPUs) implementation of the Semiclassical Initial Value Representation (SC-IVR) propagator for vibrational molecular spectroscopy calculations. The time-averaging formulation of the SC-IVR for power spectrum calculations is employed. Details about the GPU implementation of the semiclassical code are provided. Four molecules with an increasing number of atoms are considered and the GPU-calculated vibrational frequencies perfectly match the benchmark values. The computational time scaling of two GPUs (NVIDIA Tesla C2075 and Kepler K20), respectively, versus two CPUs (Intel Core i5 and Intel Xeon E5-2687W) and the critical issues related to the GPU implementation are discussed. The resulting reduction in computational time and power consumption is significant and semiclassical GPU calculations are shown to be environment friendly.

  12. Level: National and Regional Data; Row: Values of Shipments and...

    Gasoline and Diesel Fuel Update

    ... has already been included as generating fuel (for example, coal). (c) 'Distillate Fuel ... Notes: To obtain the RSE percentage for any table cell, multiply the cell's corresponding ...

  13. Level: National and Regional Data; Row: Values of Shipments and...

    Energy Information Administration (EIA) (indexed site)

    ... QWithheld because Relative Standard Error is greater than 50 percent. NANot available. Notes: To obtain the RSE percentage for any table cell, multiply the cell's corresponding ...

  14. Level: National and Regional Data; Row: Values of Shipments and...

    Gasoline and Diesel Fuel Update

    ... Noncombustible sources include solar power, wind power, hydropower, and geothermal power. ... Notes: To obtain the RSE percentage for any table cell, multiply the cell's corresponding ...

  15. Bayesian Inference for Time Trends in Parameter Values using Weighted Evidence Sets

    SciTech Connect

    D. L. Kelly; A. Malkhasyan

    2010-09-01

    There is a nearly ubiquitous assumption in PSA that parameter values are at least piecewise-constant in time. As a result, Bayesian inference tends to incorporate many years of plant operation, over which there have been significant changes in plant operational and maintenance practices, plant management, etc. These changes can cause significant changes in parameter values over time; however, failure to perform Bayesian inference in the proper time-dependent framework can mask these changes. Failure to question the assumption of constant parameter values, and failure to perform Bayesian inference in the proper time-dependent framework were noted as important issues in NUREG/CR-6813, performed for the U. S. Nuclear Regulatory Commissions Advisory Committee on Reactor Safeguards in 2003. That report noted that in-dustry lacks tools to perform time-trend analysis with Bayesian updating. This paper describes an applica-tion of time-dependent Bayesian inference methods developed for the European Commission Ageing PSA Network. These methods utilize open-source software, implementing Markov chain Monte Carlo sampling. The paper also illustrates an approach to incorporating multiple sources of data via applicability weighting factors that address differences in key influences, such as vendor, component boundaries, conditions of the operating environment, etc.

  16. Procedures for reduction of Fe XII 10747 A coronal emission-line polarization observations. Technical note

    SciTech Connect

    Arnaud, J.; Newkirk, G.

    1987-01-01

    The note documents the reducing procedures used to obtain the best estimates of the coronal Stokes parameters from the raw measurements recorded in two spectral channels with the High Altitude Observatory-Sacramento Peak Observatory Coronal Emission-line Polarimeter (KELP). The original reduction programs were modified to survey the KELP data as a whole and to help determine whether corrections are needed for each scan.

  17. LLW (Low-Level Waste) Notes, Volume 13, Number 1, February 1998

    SciTech Connect

    1998-02-01

    LLW Notes is a newsletter distributed to Low-Level Radioactive Waste Forum Participants and other state and compact officials. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties. This issue focuses on the following topics: DOI approves Ward Valley permit application; Project evidentiary hearings begin in Texas; and Summary judgment motions in California breach of contract action.

  18. COLLOQUIUM - NOTE SPECIAL TIME OF 3:15PM: Savannah River National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory: Underpinning Critical National Missions | Princeton Plasma Physics Lab May 15, 2013, 3:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM - NOTE SPECIAL TIME OF 3:15PM: Savannah River National Laboratory: Underpinning Critical National Missions Dr. Jeff Griffin Savannah River National Laboratory The Cold War mission of the Savannah River Site in South Carolina was to produce nuclear materials for the national defense. Since the Cold War ended, SRS has continued to ensure United

  19. COLLOQUIUM - PLEASE NOTE SPECIAL DATE/TIME: The Magnetospheric MultiScale

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mission Investigation of Magnetic Reconnection | Princeton Plasma Physics Lab February 21, 2013, 10:30am to 12:00pm Colloquia MBG Auditorium COLLOQUIUM - PLEASE NOTE SPECIAL DATE/TIME: The Magnetospheric MultiScale Mission Investigation of Magnetic Reconnection Professor Roy Torbert University of New Hampshire Presentation: File TC21FEB2013_RBTorbert_COMPRESSED.pptx In late fall 2014, NASA will launch the Magnetospheric Multiscale (MMS) mission to study the kinetic physics of magnetic

  20. EPICS release 3.11.6 specific documentation -- Release notes for EPICS 3.11.6

    SciTech Connect

    1994-06-07

    These notes cover the following: (1) directions for switching to production APS release R3.11.6; (2) unbundling of channel access clients; (3) access security; (4) channel access additions; synchronous time support; and (5) description of major differences between R3.11.3 and R3.11.6 Also included is a list of new and/or updated documentation for the program.

  1. Doppler Lidar Wind Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 Doppler Lidar Wind Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki ... DOESC-ARMTR-148 Doppler Lidar Wind Value-Added Product Version 1.0 RK Newsom C Sivaraman ...

  2. Value of Information Evaluation using Field Data

    SciTech Connect

    Trainor-Guitton, W.

    2015-06-15

    Value of information (VOI) provides the ability to identify and prioritize useful information gathering for a geothermal prospect, either hydrothermal or for enhanced geothermal systems. Useful information provides a value greater than the cost of the information; wasteful information costs more than the expected value of the information. In this project we applied and refined VOI methodologies on selected geothermal prospects.

  3. core values | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    core values Livermore Field Office sets core values as part of continuous improvement process At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, Reliable, Ethical We are responsible stewards of federal resources Collaboration - Communicate, Support, Team-Focused

  4. Solar Energy and Capacity Value (Fact Sheet)

    SciTech Connect

    Not Available

    2013-09-01

    This is a one-page, two-sided fact sheet on the capacity of solar power to provide value to utilities and power system operators.

  5. Photovoltaics Value Analysis | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Tool Summary LAUNCH TOOL Name: Photovoltaics Value Analysis Focus Area: Renewable Energy Topics: Environmental Website: www.nrel.govanalysispdfs42303.pdf Equivalent URI:...

  6. PV Value® | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value® PV Value® PV Value® is a free solar PV Valuation tool that answers the question of "How much is solar PV worth" and is compliant with the Uniform Standards of Professional Appraisal Practice. It is available for and being used by real estate appraisers, realtors, homeowners, commercial building owners, home builders, solar installers, green raters, insurance companies, and mortgage lenders in all 50 states along with D.C. and Puerto Rico. PV Value® allows for the

  7. Analytic Challenges to Valuing Energy Storage

    SciTech Connect

    Ma, Ookie; O'Malley, Mark; Cheung, Kerry; Larochelle, Philippe; Scheer, Rich

    2011-10-25

    Electric grid energy storage value. System-level asset focus for mechanical and electrochemical energy storage. Analysis questions for power system planning, operations, and customer-side solutions.

  8. Shared Value in Utility and Efficiency Partnerships

    Energy.gov [DOE]

    Residential Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local utilities and energy efficiency programs.

  9. ZERH Architect Training: Understanding the Value, Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Architect Training: Understanding the Value, Technology and Benefits of the Zero Energy ... Consumer demand for market options that offer improved comfort, health, safety, resale ...

  10. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    development. DOE EVMS Risk Assessment Matrix - (MS Word) Formulas and Terminology "Gold Card" - September 2011 Road Show Presentation: Enhancing Earned Value (EV) Analysis Using ...

  11. Analytic Challenges to Valuing Energy Storage

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    analytical task. Market Conditions - Markets are continually evolving, and the long-term value of energy storage is difficult to capture. Niche markets have emerged, but...

  12. Note: Rapid reduction of graphene oxide paper by glow discharge plasma

    SciTech Connect

    Bo, Zheng; Qian, Jiajing; Duan, Liangping; Qiu, Kunzan Yan, Jianhua; Cen, Kefa; Han, Zhao Jun; Ostrikov, Kostya

    2015-05-15

    This note reports on a novel method for the rapid reduction of graphene oxide (GO) paper using a glow discharge plasma reactor. Glow discharge is produced and sustained between two parallel-plate graphite electrodes at a pressure of 240 mTorr. By exposing GO paper at the junction of negative-glow and Faraday-dark area for 4 min, the oxygen-containing groups can be effectively removed (C/O ratio increases from 2.6 to 7.9), while the material integrality and flexibility are kept well. Electrochemical measurements demonstrate that the as-obtained reduced GO paper can be potentially used for supercapacitor application.

  13. Note: Design principles of a linear array multi-channel effusive metal-vapor atom source

    SciTech Connect

    Jana, B.; Majumder, A.; Thakur, K. B.; Das, A. K.

    2013-10-15

    Atomic beams can easily be produced by allowing atoms to effuse through a channel. In an earlier investigation [A. Majumder et al., Vacuum 83, 989 (2009)], we had designed, fabricated, and characterized an effusive metal-vapor source using collinear-array of multi-channel. In this note, we describe the theoretical basis of designing the source. Atom density in atomic beam has been estimated using a set of analytical expressions for long-channel operated in transparent mode. Parametric studies on aspect ratio of channel, inter-channel separation, beam width, and vertical distance from the source are carried out. They are useful in providing physical picture and optimizing design parameters.

  14. MicroBooNE Detector Stability MICROBOONE-NOTE-1013-PUB The MicroBooNE

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MicroBooNE Detector Stability MICROBOONE-NOTE-1013-PUB The MicroBooNE Collaboration June 30, 2016 Abstract The Micro Booster Neutrino Experiment (MicroBooNE) is designed to explore the low- energy excess in the ν e event spectrum reported by the MiniBooNE experiment [1] and to measure ν-Ar cross sections in the 1 GeV energy range. The detector is a liquid argon time projection chamber with wire readout, supplemented with a light detection system based on photo-multiplier tubes (PMTs). The

  15. Attachment 1 - PIC Transcribed Flip Chart Notes Final Meeting Summary Page 12

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    - PIC Transcribed Flip Chart Notes Final Meeting Summary Page 12 Public Involvement Committee September 4, 2013 Strategic Planning: Quarters by month * Q1: Oct. - Dec. * Q2: Jan - March * Q3: April - June * Q4: July - Sept. Page 1 Strategic Planning: 2014 Topics (Interactive activity) * = priority topic for discussion at meeting; �= priority for future discussion | Quarter prioritized for discussion (Q1, Q2, Q3, Q4) * 100-F Proposed Plan | *** Q2 * 100 D-H Proposed Plan * Draft Land

  16. Neutron Physics. A Revision of I. Halpern's notes on E. Fermi's lectures in 1945

    DOE R&D Accomplishments

    Beckerley, J.G.

    1951-10-16

    In the Fall of 1945 a course in Neutron Physics was given by Professor Fermi as part of the program of the Los Alamos University. The course consisted of thirty lectures most of which were given by Fermi. In his absence R.F. Christy and E. Segre gave several lectures. The present revision is based upon class notes prepared by I. Halpern with some assistance by B.T. Feld and issued first as document LADC 255 and later with wider circulation as MDDC 320.

  17. Hanford Advisory Board FY2014 Work Plan - "A" List - Facilitator notes o

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilitator notes on midyear status for RAP-lead topics (updated 4/30/14) These are the priority topics that the Board is expected to take action on in FY2014, as agreed to by the TPA and the Board. The timing of these topics drives the need for committee meetings. Their status may change to "topics of interest" if they are delayed or deferred, and if there is agreement to do so among the EIC and Agency Liaisons. Adopted by Consensus, September 6, 2013 Page 1 of 12 Priority Topics -

  18. Value tradeoffs for the Hanford Tank Waste Remediation System (TWRS) program

    SciTech Connect

    Keeney, R.L.; Winterfeldt, D. von

    1997-09-01

    The Tank Waste Remediation System (TWRS) program at the Hanford Site of the Department of Energy has adopted a logical approach to making decisions that uses decision analysis to structure and analyze decision alternatives and public values to evaluate them. This report is the third in a series to support this effort. The first identified a set of objectives (called {open_quotes}ends objectives{close_quotes}) that characterize the ultimate goals and desires of Hanford decision makers and stakeholders. The second report developed operational measures for these ends objectives (called {open_quotes}ends measures{close_quotes}) and it also developed a set of performance objectives and associated performance measures that are more directly related to how well decision alternatives in the TWRS program perform to achieve the ends objectives. The present report describes the development of quantitative value tradeoffs for both the ends measures and the performance measures. First, five national value experts were interviewed to obtain value tradeoffs for units of the ends measures identified in Keeney and von Winterfeldt (1996). The results of this assessment are shown in Table S1. Second, the implied value tradeoffs for the units of the performance measures were calculated from the value tradeoffs for units of the ends measures provided by the national experts. When calculating the value tradeoffs for the units of the performance measures, very simple quantitative relationships between ends and performance measures were assumed. The results of this calculation are shown in Table S2. The results of this report shown in Tables S1 and S2 should be considered preliminary and largely illustrative of the principles for developing value tradeoffs. The report lists several important caveats and recommendations for how future work can improve on the assessment of value tradeoffs.

  19. COST OF ADDRESSING TARGETS OF UNEQUAL VALUE

    SciTech Connect

    G.H. CANAVAN

    2001-08-01

    The formalism for evaluating first strike costs and incentives for military targeting generalize to include higher value targets. That introduces two new allocations to the usual allocation between missiles and military targets, but they can be performed analytically. As the number of weapons on each side decreases, the optimal fraction of second strike weapons allocated to military values falls. The shift to high value targets is more pronounced below about 1,000 weapons for nominal parameters. Below 500 weapons the first striker's cost of action drops below its cost of inaction. A strike would induce a second strike of about 250 weapons on high value targets. An increase in the first striker's preference for damage to the other's high value targets increases or a decrease in its preference for preventing damage to its own high value targets decreases first strike costs and stability margins. Including defenses complicates allocations slightly. The main effect is increased attrition of second strikes, particularly at larger defenses, which makes it possible to significantly reduce damage to high value targets. At 1,000 weapons, by 300 to 400 interceptors the first striker's costs are reduced to 30% below that of inaction and the number of weapons delivered on the first striker's high value targets is reduced to about 100.

  20. Applying vitrification to meet customers` values

    SciTech Connect

    Roy, B. [Scientific Ecology Group, Inc., Oak Ridge, TN (United States)

    1996-03-01

    Cost-effective waste management solutions that maximize customer value require a thorough and flexible evaluation and integration of approaches, technology applications, and disposal options. This is particulary true in the application of vitrification to low-level radioactive and mixed waste stabilization. Case-specific evaluations are the required to determine the highest value, most cost-effective approaches.

  1. Level: National and Regional Data; Row: Values of Shipments and...

    Annual Energy Outlook

    ... Fuel Oil' includes Nos. 1, 2, and 4 fuel oils and Nos. 1, 2, and 4 diesel fuels. ... Notes: To obtain the RSE percentage for any table cell, multiply the cell's corresponding ...

  2. Interpolated Sounding and Gridded Sounding Value-Added Products

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... or sondewnpn.b1 vwind vwind T Toto and M Jensen, March 2016, DOESC-ARM-TR-183 4 Note that GRIDDEDSONE is not provided by ARM as an available data stream; however, the data ...

  3. Chapter 48 - Value Engineering | Department of Energy

    Energy.gov [DOE] (indexed site)

    48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology Microsoft PowerPoint - 12 Holman White PM Conference 2010 Rev 2...

  4. ARM - Value-Added Product Status Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Status Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2015 (PDF, 1MB) ARM Climate Research Facility

  5. Value of Flexibility in the Markets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Value of Flexibility in the Markets * Basic overview of the SPP and MISO markets * Potential benefit to some SPA customers of using markets to schedule energy * Increasing need for ancillary services, and the value of ancillary services in the markets 3 From presentation by ERCOT: Operational Challenges due to High Wind * Higher frequency deviations due to large system excursions * Inadequate transmission for projected wind growth * Constraint management under high and low wind * Difficulty in

  6. Potential value of Cs-137 capsules

    SciTech Connect

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  7. Meeting notes of the High Flux Isotope Reactor (HFIR) futures group

    SciTech Connect

    Houser, M.M.

    1995-08-01

    This report is a compilation of the notes from the ten meetings. The group charter is: (1) to identify and characterize the range of possibilities and necessities for keeping the HFIR operating for at least the next 15 years; (2) to identify and characterize the range of possibilities for enhancing the scientific and technical utility of the HFIR; (3) to evaluate the benefits or impacts of these possibilities on the various scientific fields that use the HFIR or its products; (4) to evaluate the benefits or impacts on the operation and maintenance of the HFIR facility and the regulatory requirements; (5) to estimate the costs, including operating costs, and the schedules, including downtime, for these various possibilities; and one possible impact of proposed changes may be to stimulate increased pressure for a reduced enrichment fuel for HFIR.

  8. Note: Inter-satellite laser range-rate measurement by using digital phase locked loop

    SciTech Connect

    Liang, Yu-Rong; Duan, Hui-Zong; Xiao, Xin-Long; Wei, Bing-Bing; Yeh, Hsien-Chi

    2015-01-15

    This note presents an improved high-resolution frequency measurement system dedicated for the inter-satellite range-rate monitoring that could be used in the future’s gravity recovery mission. We set up a simplified common signal test instead of the three frequencies test. The experimental results show that the dominant noises are the sampling time jitter and the thermal drift of electronic components, which can be reduced by using the pilot-tone correction and passive thermal control. The improved noise level is about 10{sup −8} Hz/Hz{sup 1/2}@0.01Hz, limited by the signal-to-noise ratio of the sampling circuit.

  9. Note on Dirac-Born-Infeld dynamics of the D-brane near NS5-branes

    SciTech Connect

    Chen Bin; Sun Bo

    2005-08-15

    In this note, we investigate the homogeneous radial dynamics of (Dp, NS5) systems without and with one compactified transverse direction, in the framework of Dirac-Born-Infeld effective action. During the homogeneous evolution, the electric field on the D-brane is always conserved and the radial motion could be reduced to a one-dimension dynamical system with an effective potential. When the Dp-brane energy is not high, the brane moves in a restricted region, with the orbits depending on the conserved energy, angular momentum through the form of the effective potential. When the Dp-brane energy is high enough, it can escape to infinity. It turns out that the conserved angular momentum plays an interesting role in the dynamics. Moreover, we discuss the gauge dynamics around the tachyon vacuum and find that the dynamics is very reminiscent of the string fluid in the rolling tachyon case.

  10. EPICS release 3.11 specific documentation -- EPICS release notes for 3.11

    SciTech Connect

    1994-01-19

    EPICS release 3.11 is now ready for user testing. A person who wants to set up a simplified application environment to boot an IOC and create databases using R3.11 should follow the directions in Appendix B, page 27, of the EPICS Source/Release Control Manual, Sept. 20, 1993. The R3.11 EPICS path at ANL/APS is /net/phebos/epics/R3.11 so the command to get the new release is /net/phebos/epics/R3.11/Unix/share/bin/getrel /net/phebos/epics/R3.11. An existing R3.8 short form report can be copied to this new directory and used to create a database. ANL/APS is currently testing an Application Developers Source/Release control system. It is not yet ready for general distribution. Attached are the EPICS R3.11 release notes.

  11. Non-Linear Transmission Line (NLTL) Microwave Source Lecture Notes the United States Particle Accelerator School

    SciTech Connect

    Russell, Steven J.; Carlsten, Bruce E.

    2012-06-26

    We will quickly go through the history of the non-linear transmission lines (NLTLs). We will describe how they work, how they are modeled and how they are designed. Note that the field of high power, NLTL microwave sources is still under development, so this is just a snap shot of their current state. Topics discussed are: (1) Introduction to solitons and the KdV equation; (2) The lumped element non-linear transmission line; (3) Solution of the KdV equation; (4) Non-linear transmission lines at microwave frequencies; (5) Numerical methods for NLTL analysis; (6) Unipolar versus bipolar input; (7) High power NLTL pioneers; (8) Resistive versus reactive load; (9) Non-lineaer dielectrics; and (10) Effect of losses.

  12. A Note on the Fisher Ideal Index Decomposition for Structural Change in Energy Intensity

    SciTech Connect

    Boyd, Gale A.; Roop, Joseph M.

    2004-01-01

    By direct appeal to the theory underlying price index numbers used by the energy decomposition literature, this note proposed the chain weighted Fisher Ideal Index as a formula that solves the ''residual problem;'' i.e., the decomposition is not complete in the sense that the components do not add to the whole. The connection to index number theory also allows us to illustrate that the measures of activity used to define energy intensity need not be additive across the sectors that are involved in the decomposition. We give an empirical example using recent U. S. manufacturing data of the Fisher Ideal Index, compared to the Tornquist Divisia Index, a popular index in the energy literature.

  13. Safe disposal of metal values in slag

    SciTech Connect

    Halpin, P.T.; Zarur, G.L.

    1982-10-26

    The method of safely disposing of sludge containing metal values capable of displaying toxic ecological properties includes the steps of deriving from an organic or inorganic sludge an intermediate product such as a dewatered sludge or an incinerated ash, and adding this intermediate product to a metal smelting step of a type producing a slag such that most of the metal values become encapsulated in the slag. Some precious metal values may be recovered with the metal being smelted, and may be subsequently separated therefrom by appropriate metal winning steps. The sludge product brings to the smelting process certain additives needed therein such as silica and phosphates for the slag, alumina and magnesium to lower the viscosity of the molten slag, and organic matter serving as reducing agents.

  14. Microfabricated fuel heating value monitoring device

    DOEpatents

    Robinson, Alex L.; Manginell, Ronald P.; Moorman, Matthew W.

    2010-05-04

    A microfabricated fuel heating value monitoring device comprises a microfabricated gas chromatography column in combination with a catalytic microcalorimeter. The microcalorimeter can comprise a reference thermal conductivity sensor to provide diagnostics and surety. Using microfabrication techniques, the device can be manufactured in production quantities at a low per-unit cost. The microfabricated fuel heating value monitoring device enables continuous calorimetric determination of the heating value of natural gas with a 1 minute analysis time and 1.5 minute cycle time using air as a carrier gas. This device has applications in remote natural gas mining stations, pipeline switching and metering stations, turbine generators, and other industrial user sites. For gas pipelines, the device can improve gas quality during transfer and blending, and provide accurate financial accounting. For industrial end users, the device can provide continuous feedback of physical gas properties to improve combustion efficiency during use.

  15. Value of solar thermal industrial process heat

    SciTech Connect

    Brown, D.R.; Fassbender, L.L.; Chockie, A.D.

    1986-03-01

    This study estimated the value of solar thermal-generated industrial process heat (IPH) as a function of process heat temperature. The value of solar thermal energy is equal to the cost of producing energy from conventional fuels and equipment if the energy produced from either source provides an equal level of service. This requirement put the focus of this study on defining and characterizing conventional process heat equipment and fuels. Costs (values) were estimated for 17 different design points representing different combinations of conventional technologies, temperatures, and fuels. Costs were first estimated for median or representative conditions at each design point. The cost impact of capacity factor, efficiency, fuel escalation rate, and regional fuel price differences were then evaluated by varying each of these factors within credible ranges.

  16. Determine and Communicate the Value of Replication | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Communicate the Value of Replication Determine and Communicate the Value of Replication This presentation shares how to determine and later communicate the value of ...

  17. Value Creation Through Integrated Networks and Convergence

    SciTech Connect

    De Martini, Paul; Taft, Jeffrey D.

    2015-04-01

    Customer adoption of distributed energy resources and public policies are driving changes in the uses of the distribution system. A system originally designed and built for one-way energy flows from central generating facilities to end-use customers is now experiencing injections of energy from customers anywhere on the grid and frequent reversals in the direction of energy flow. In response, regulators and utilities are re-thinking the design and operations of the grid to create more open and transactive electric networks. This evolution has the opportunity to unlock significant value for customers and utilities. Alternatively, failure to seize this potential may instead lead to an erosion of value if customers seek to defect and disconnect from the system. This paper will discuss how current grid modernization investments may be leveraged to create open networks that increase value through the interaction of intelligent devices on the grid and prosumerization of customers. Moreover, even greater value can be realized through the synergistic effects of convergence of multiple networks. This paper will highlight examples of the emerging nexus of non-electric networks with electricity.

  18. Value of Energy Storage for Grid Applications

    SciTech Connect

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  19. Bayesian Inference for Time Trends in Parameter Values: Case Study for the Ageing PSA Network of the European Commission

    SciTech Connect

    Dana L. Kelly; Albert Malkhasyan

    2010-06-01

    There is a nearly ubiquitous assumption in PSA that parameter values are at least piecewise-constant in time. As a result, Bayesian inference tends to incorporate many years of plant operation, over which there have been significant changes in plant operational and maintenance practices, plant management, etc. These changes can cause significant changes in parameter values over time; however, failure to perform Bayesian inference in the proper time-dependent framework can mask these changes. Failure to question the assumption of constant parameter values, and failure to perform Bayesian inference in the proper time-dependent framework were noted as important issues in NUREG/CR-6813, performed for the U. S. Nuclear Regulatory Commissions Advisory Committee on Reactor Safeguards in 2003. That report noted that industry lacks tools to perform time-trend analysis with Bayesian updating. This paper describes an application of time-dependent Bayesian inference methods developed for the European Commission Ageing PSA Network. These methods utilize open-source software, implementing Markov chain Monte Carlo sampling. The paper also illustrates the development of a generic prior distribution, which incorporates multiple sources of generic data via weighting factors that address differences in key influences, such as vendor, component boundaries, conditions of the operating environment, etc.

  20. The Business Value of Superior Energy Performance

    SciTech Connect

    McKane, Aimee; Scheihing, Paul; Evans, Tracy; Glatt, Sandy; Meffert, William

    2015-08-04

    Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing the collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.

  1. Tidal constituent database. West Coast of the United States and Eastern North pacific ocean. Technical note

    SciTech Connect

    1995-01-01

    This technical note describes a database of tidal elevation boundary condition information generated in support of the `Long-Term Fate of Dredged Material Disposed in Open Water` research of the Dredging Research Program (DRP), being conducted at the U.S. Army Engineer Waterways Experiment Station. The database, described in detail by Hench and others (1994), allows the user to manually generate time series of tidal elevations or to use a program to access the full database to generate time series of both tidal elevations and currents for any location along the West Coast of the United States and Eastern North Pacific Ocean, extending from Seal Cape on Unimak Island, Alaska, in the North to Punta Parada, Peru, in the South. The land boundary includes the Pacific shorelines of Alaska, Canada, mainland United States, Mexico, Guatemala, El Salvador, Nicaragua, Costa Rica, Panama, Columbia, and Northern Peru. Although the capability to generate these time series was developed to provide input to the Long-Term Fate and Stability Model (LTFATE), the generated time series can be used for any application requiring tidal forcing data.

  2. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflageration

    SciTech Connect

    Crowe, R.D., Westinghouse Hanford

    1996-09-09

    The purpose of this calculation note is to provide the basis for In-Tank Fuel fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  3. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflagration

    SciTech Connect

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for In-Tank Fuel Fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  4. Value Streams in Microgrids: A literature Review

    SciTech Connect

    Stadler, Michael; Cardoso, Gonçalo; Mashayekh, Salman; Forget, Thibault; DeForest, Nicholas; Agarwal, Ankit; Schönbein, Anna

    2015-10-01

    Microgrids are an increasingly common component of the evolving electricity grids with the potential to improve local reliability, reduce costs, and increase penetration rates for distributed renewable generation. The additional complexity of microgrids often leads to increased investment costs, creating a barrier for widespread adoption. These costs may result directly from specific needs for islanding detection, protection systems and power quality assurance that would otherwise be avoided in simpler system configurations. However, microgrids also facilitate additional value streams that may make up for their increased costs and improve the economic viability of microgrid deployment. This paper analyses the literature currently available on research relevant to value streams occurring in microgrids that may contribute to offset the increased investment costs. A review on research related to specific microgrid requirements is also presented.

  5. ARM - Value-Added Product (VAP) Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (VAP) Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product (VAP) Reports For proper viewing, technical reports should be viewed with Adobe Acrobat Reader. Download the latest version from the Adobe Reader

  6. ARM - Value-Added Products - Status

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    - Status Report Expand Orange | Expand Blue | Expand Green | Collapse All See Legend for Data Availability explanation. ARM - Value-Added Products - Status Last Update: March 21 2016 19:00:50 +/- Vap Name Translator Developer Frequency Tier Producer Data Availability ACRED (ARM Cloud Retrieval Ensemble Data) Shaocheng Xie Chuanfeng Zhao, Renata Mc Coy Periodically Evaluation Developer ARM Overview: Developer Description: The ARM Cloud Retrieval Ensemble Dataset (ACRED) is a multi-year cloud

  7. Merged Sounding Value-Added Product

    SciTech Connect

    Troyan, D

    2010-03-03

    The Merged Sounding value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), surface meteorological instruments, and European Centre for Medium-Range Weather Forecasts (ECMWF) model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of 266 altitude levels.

  8. Survey to determine the value of DYNA

    SciTech Connect

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA's value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and DYNA-like'' codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl DYNA-like'' codes: Has a commercial market developed for DYNA-like'' codes This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of DYNA-like'' codes or codes like DYNA.'' Several of the DYNA-like'' codes used DYNA as their core. These codes are descendants of DYNA.

  9. Survey to determine the value of DYNA

    SciTech Connect

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA`s value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and ``DYNA-like`` codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it? (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl ``DYNA-like`` codes: Has a commercial market developed for ``DYNA-like`` codes? This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of ``DYNA-like`` codes or ``codes like DYNA.`` Several of the ``DYNA-like`` codes used DYNA as their core. These codes are descendants of DYNA.

  10. PROCESS OF SEPARATING PLUTONIUM VALUES BY ELECTRODEPOSITION

    DOEpatents

    Whal, A.C.

    1958-04-15

    A process is described of separating plutonium values from an aqueous solution by electrodeposition. The process consists of subjecting an aqueous 0.1 to 1.0 N nitric acid solution containing plutonium ions to electrolysis between inert metallic electrodes. A current density of one milliampere io one ampere per square centimeter of cathode surface and a temperature between 10 and 60 d C are maintained. Plutonium is electrodeposited on the cathode surface and recovered.

  11. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer

    Jensen, Michael

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  12. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer

    Jensen, Michael

    2012-09-28

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  13. Capacity Value of Concentrating Solar Power Plants

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Capacity Value of Concentrating Solar Power Plants Seyed Hossein Madaeni and Ramteen Sioshansi Ohio State University Paul Denholm National Renewable Energy Laboratory Technical Report NREL/TP-6A20-51253 June 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract

  14. Fuel Tables.indd

    Gasoline and Diesel Fuel Update

    F8: Distillate Fuel Oil Price and Expenditure Estimates, 2014 State Prices Expenditures ... Where shown, (s) Expenditure value less than 0.05. Notes: Distillate fuel oil estimates ...

  15. Short-Term Energy Outlook - U.S. Energy Information Administration...

    Energy Information Administration (EIA) (indexed site)

    - no data available Notes: The approximate break between historical and forecast values is shown with estimates and forecasts in italics. Regions refer to U.S. Census ...

  16. I/O values for determination of the origin of some indoor organic pollutants

    SciTech Connect

    Otson, R.; Zhu, J.

    1997-12-31

    To reduce human health risks resulting from exposure to toxic chemicals, it is important to determine the origin of such substances. The ratio (I/O) of indoor to outdoor concentrations of selected airborne vapor phase organic compounds (VPOC) was used to estimate the contribution of indoor sources to levels of the compounds in the air of 44 homes selected randomly in the Greater Toronto Area (GTA). Average I/O values for all of the homes were greater 1.5 for 10 of the 20 detected target compounds, and it could be concluded that indoor VPOC sources had a greater impact on indoor air quality than outdoor air in these instances. A significant finding, which aptly demonstrates the importance of indoor sources and pollution, was the overall I/O value of 5.2 for the 44 representative GTA homes. Possible indoor sources for most of the 10 compounds could be identified, based on information collected by means of a questionnaire, as well as from the scientific literature. However, possible sources for some compounds could not be determined as readily, probably because of the presence of multiple sources, and sources which had not been previously noted, such as foods and beverages. The sensitivity of I/O values to various factors (e.g., source strength, air exchange rates, precision of measurements, unanticipated sources), and the reliability of determining the origin of pollutants by use of I/O values alone were examined, with some examples. If used judiciously, the I/O value can be a useful tool for IAQ investigations.

  17. Interpolated Sounding Value-Added Product

    SciTech Connect

    Troyan, D

    2013-04-01

    The Interpolated Sounding (INTERPSONDE) value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), and surface meteorological instruments in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of at least 266 altitude levels. This VAP is part of the Merged Sounding (MERGESONDE) suite of VAPs. INTERPSONDE is the profile of the atmospheric thermodynamic state created using the algorithms of MERGESONDE without including the model data from the European Centre for Medium-range Weather Forecasting (ECMWF). More specifically, INTERPSONDE VAP represents an intermediate step within the larger MERGESONDE process.

  18. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. | Department of Energy Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of

  19. Value-based reliability transmission planning

    SciTech Connect

    Dalton, J.G. III; Garrison, D.L.; Fallon, C.M.

    1996-08-01

    This paper presents a new value-based reliability planning (VBRP) process proposed for planning Duke Power Company`s (DPC) regional transmission system. All transmission served customers are fed from DPC`s regional transmission system which consists of a 44-kV predominantly radial system and a 100-kV predominantly non-radial system. In the past, any single contingency that could occur during system peak conditions and cause a thermal overload required the overloaded facility to be upgraded, regardless of the costs or the likelihood of the overload occurring. The new VBRP process is based on transmission system reliability evaluation and includes the following important elements: (1) a ten-year historical data base describing the probabilities of forced outages for lines and transformers; (2) a five-year average load duration curve describing the probability of an overload should a contingency occur; (3) a customer outage cost data base; (4) and probabilistic techniques. The new process attempts to balance the costs of improving service reliability with the benefits or value that these improvements bring to these customers. The objective is to provide the customers their required level of reliability while minimizing the Total Cost of their electric service.

  20. Droplet Number Concentration Value Added Product

    Energy Science and Technology Software Center

    2015-08-06

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration (Nd) will increase and droplet size will decrease, for a given liquid water path. This will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation; however, the magnitude and variability of these processes under different environmental conditions is still uncertain.McComiskey et al. (2009) have implemented a method, based onBoers andmore » Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions. In order to provide data sets for studying aerosol-cloud interactions, the McComiskey et al. (2009) method was implemented as the Droplet Number Concentration (NDROP) value-added product (VAP).« less

  1. Note: Calibration of EBT3 radiochromic film for measuring solar ultraviolet radiation

    SciTech Connect

    Chun, S. L.; Yu, P. K. N.

    2014-10-01

    Solar (UVA + UVB) exposure was assessed using the Gafchromic EBT3 film. The coloration change was represented by the net reflective optical density (Net ROD). Through calibrations against a UV-tube lamp, operational relationships were obtained between Net ROD and the (UVA + UVB) exposures (in J cm⁻²p or J m⁻²). The useful range was from ~0.2 to ~30 J cm⁻². The uniformity of UV irradiation was crucial for an accurate calibration. For solar exposures ranging from 2 to 11 J cm⁻², the predicted Net ROD agreed with the recorded values within 9%, while the predicted exposures agreed with the recorded values within 15%.

  2. Notes on the plasma resonance peak employed to determine doping in SiC

    SciTech Connect

    Engelbrecht, J. A. A.; van Rooyen, I. J.; Henry, A.; Janzen, E.; Sephton, B.

    2015-07-23

    In this study, the doping level of a semiconductor material can be determined using the plasma resonance frequency to obtain the carrier concentration associated with doping. This paper provides an overview of the procedure for the three most common polytypes of SiC. Results for 3C-SiC are presented and discussed. In phosphorus doped samples analysed, it is submitted that the 2nd plasma resonance cannot be detected due to high values of the free carrier damping constant γ.

  3. Value Stream Mapping: Foam Collection and Processing.

    SciTech Connect

    Sorensen, Christian

    2015-07-01

    The effort to collect and process foam for the purpose of recycling performed by the Material Sustainability and Pollution Prevention (MSP2) team at Sandia National Laboratories is an incredible one, but in order to make it run more efficiently it needed some tweaking. This project started in June of 2015. We used the Value Stream Mapping process to allow us to look at the current state of the foam collection and processing operation. We then thought of all the possible ways the process could be improved. Soon after that we discussed which of the "dreams" were feasible. And finally, we assigned action items to members of the team so as to ensure that the improvements actually occur. These improvements will then, due to varying factors, continue to occur over the next couple years.

  4. Values and the quantum conception of man

    SciTech Connect

    Stapp, H.P.

    1995-06-01

    Classical mechanics is based upon a mechanical picture of nature that is fundamentally incorrect. It has been replaced at the basic level by a radically different theory: quantum mechanics. This change entails an enormous shift in one`s basic conception of nature, one that can profoundly alter the scientific image of man himself. Self-image is the foundation of values, and the replacement of the mechanistic self-image derived from classical mechanics by one concordant with quantum mechanics may provide the foundation of a moral order better suited to today`s times, a self-image that endows human life with meaning, responsibility, and a deeper linkage to nature as a whole.

  5. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective April 2014) MEMORANDUM FOR: XXXXXXXXXXXXXXXX ASSOCIATE ADMINISTRATOR FOR MANAGEMENT AND BUDGET THROUGH: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT FROM: XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX SUBJECT: Request to Reactivate Directive Currently on Hold PURPOSE: The purpose of this memorandum is to request the Directives

  6. Some notes on the calculation of energy-angle correlated distributions with TNG and their representation in File 6 formats

    SciTech Connect

    Larson, D.C.; Fu, C.Y.; Hetrick, D.M.

    1987-01-01

    The model code TNG has been extensively used in evaluation work of structural materials for ENDF/B-VI performed at Oak Ridge National Laboratory. A new aspect of ENDF/B-VI is the use of File 6 formats for energy-angle correlated data. Such data are generally calculated, anchored by experimental data. In this informal note we outline how the TNG results are calculated and entered in the File 6 formats. 4 refs.

  7. Sandia Energy - Sandia Tool Determines Value of Solar Photovoltaic...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tool Determines Value of Solar Photovoltaic Power Systems Home Renewable Energy Energy Partnership News News & Events Photovoltaic Solar Sandia Tool Determines Value of Solar...

  8. Energy Star Building Upgrade Value Calculator | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    Upgrade Value Calculator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Star Building Upgrade Value Calculator (for Office Properties) AgencyCompany...

  9. Department of Energy Earned Value Management Survey Results ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of ...

  10. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, ...

  11. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Program Document: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  12. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added Product Report ...

  13. Methods for Analyzing the Economic Value of Concentrating Solar...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (CSP-TES) provides multiple quantifiable benefits compared to CSP without storage or to solar photovoltaic (PV) technology, including higher energy value, ancillary services value,...

  14. Biopower Report Presents Methodology for Assessing the Value...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing...

  15. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  16. The Value of Distributed Generation and CHP Resources in Wholesale...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, September 2005 The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, ...

  17. Estimating the Value of Electricity Storage Resources in Electricity...

    Office of Environmental Management (EM)

    Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The ...

  18. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower ...

  19. Best Practices for Getting the Best Value from Federal Utility...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Utility Energy Service Contracts Best Practices for Getting the Best Value from Federal Utility Energy Service Contracts Best Practices for Getting the Best Value from Federal ...

  20. Carbon Value Analysis Tool (CVAT) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Value Analysis Tool (CVAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Value Analysis Tool (CVAT) AgencyCompany Organization: World Resources Institute...

  1. The value of energy storage in decarbonizing the electricity...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The value of energy storage in decarbonizing the electricity sector Title The value of energy storage in decarbonizing the electricity sector Publication Type Journal Article Year ...

  2. Value of Energy Storage for Grid Applications (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Citation Details In-Document Search Title: Value of Energy Storage for Grid Applications This analysis evaluates several operational ...

  3. Baseline and Target Values for PV Forecasts: Toward Improved...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting ... Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting Jie ...

  4. Ecological Screening Values for Surface Water, Sediment, and...

    Office of Scientific and Technical Information (OSTI)

    Ecological Screening Values for Surface Water, Sediment, and Soil Citation Details In-Document Search Title: Ecological Screening Values for Surface Water, Sediment, and Soil ...

  5. Production of High Value Cellulose from Tobacco

    SciTech Connect

    Berson, R Eric; Dvaid, Keith; McGinley, W Mark; Meduri, Praveen; Clark, Ezra; Dayalan, Ethirajulu; Sumanasekera, Gamini; Sunkara, Mahendra; Colliver, Donald

    2011-06-15

    The Kentucky Rural Energy Supply Program was established in 2005 by a federal direct appropriation to benefit the citizens of the Commonwealth by creating a unified statewide consortium to promote renewable energy and energy efficiency in Kentucky. The U.S. Department of Energy's (DOE) Office of Biomass Programs initially funded the consortium in 2005 with a $2 million operational grant. The Kentucky Rural Energy Consortium (KREC) was formed at the outset of the program to advance energy efficiency and comprehensive research on biomass and bioenergy of importance to Kentucky agriculture, rural communities, and related industries. In recognition of the successful efforts of the program, KREC received an additional $1.96 million federal appropriation in 2008 for renewal of the DOE grant. From the beginning, KREC understood the value of providing a statewide forum for the discussion of Kentucky's long term energy needs and economic development potential. The new funding allowed KREC to continue to serve as a clearinghouse and support new research and development and outreach programs for energy efficiency and renewable energy.

  6. Value of Laboratory Experiments for Code Validations

    SciTech Connect

    Wawersik, W.R.

    1998-12-14

    Numerical codes have become indispensable for designing underground structures and interpretating the behavior of geologic systems. Because of the complexities of geologic systems, however, code calculations often are associated with large quantitative uncertainties. This papers presents three examples to demonstrate the value of laboratory(or bench scale) experiments to evaluate the predictive capabilities of such codes with five major conclusions: Laboratory or bench-scale experiments are a very cost-effective, controlled means of evaluating and validating numerical codes, not instead of but before or at least concurrent with the implementation of in situ studies. The design of good laboratory validation tests must identifj what aspects of a code are to be scrutinized in order to optimize the size, geometry, boundary conditions, and duration of the experiments. The design of good and sometimes difficult numerical analyses and sensitivity studies. Laboratory validation tests must involve: Good validation experiments will generate independent data sets to identify the combined effect of constitutive models, model generalizations, material parameters, and numerical algorithms. Successfid validations of numerical codes mandate a close collaboration between experimentalists and analysts drawing from the full gamut of observations, measurements, and mathematical results.

  7. Technical Note: On the proton range and nuclear interactions in compounds and mixtures

    SciTech Connect

    Rasouli, Fatemeh S. Masoudi, S. Farhad; Jette, David

    2015-05-15

    Purpose: Range and probability of nonelastic nuclear interactions (NNIs) for protons can be found only for a limited number of compounds and mixtures in nuclear data tables, and the proton-related analytical studies are therefore restricted to those materials for which the data are provided in these documents. In this paper, the authors present general solutions for calculating the proton range and probability of NNIs for desired compounds and mixtures. Methods: Benefiting from the Bragg–Kleeman approximation of mass stopping power, the authors derive a concise formula for calculating the proton range in materials with arbitrary number of constituent elements. Additionally, the authors propose another relation for obtaining the probability of undergoing NNIs which is suggested to be additive. Results: The examination of the formula presented shows that the authors’ method can be considered as general solutions for analytical evaluation of the range in compounds and mixtures. The formula proposed for probability of NNIs is valid for almost every compound except for those materials containing H. It is shown that this formula can be modified so that it covers these materials. Conclusions: The authors present a general analytical method for calculating the range and probability of NNIs for protons which are mathematically easy to handle and valid for desired compounds or mixtures composed of an arbitrary number of constituent elements, including materials of interest for proton radiotherapy purposes.

  8. Technical Note: Response measurement for select radiation detectors in magnetic fields

    SciTech Connect

    Reynolds, M.; Fallone, B. G.; Rathee, S.

    2015-06-15

    Purpose: Dose response to applied magnetic fields for ion chambers and solid state detectors has been investigated previously for the anticipated use in linear acceleratormagnetic resonance devices. In this investigation, the authors present the measured response of selected radiation detectors when the magnetic field is applied in the same direction as the radiation beam, i.e., a longitudinal magnetic field, to verify previous simulation only data. Methods: The dose response of a PR06C ion chamber, PTW60003 diamond detector, and IBA PFD diode detector is measured in a longitudinal magnetic field. The detectors are irradiated with buildup caps and their long axes either parallel or perpendicular to the incident photon beam. In each case, the magnetic field dose response is reported as the ratio of detector signals with to that without an applied longitudinal magnetic field. The magnetic field dose response for each unique orientation as a function of magnetic field strength was then compared to the previous simulation only studies. Results: The measured dose response of each detector in longitudinal magnetic fields shows no discernable response up to near 0.21 T. This result was expected and matches the previously published simulation only results, showing no appreciable dose response with magnetic field. Conclusions: Low field longitudinal magnetic fields have been shown to have little or no effect on the dose response of the detectors investigated and further lend credibility to previous simulation only studies.

  9. Contractor Earned Value Management System Certification Status | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Earned Value Management System Certification Status Contractor Earned Value Management System Certification Status Certification Status for major EM Contracts Contractor Earned Value Management System Certification Status (129.77 KB) More Documents & Publications Department of Energy Earned Value Management Survey Results VPP Participant Status EM Major Contracts Awarded Since 2006

  10. Note: Experimental platform for magnetized high-energy-density plasma studies at the omega laser facility

    DOE PAGES [OSTI]

    Fiksel, G.; Agliata, A.; Barnak, D.; Brent, G.; Chang, P. -Y.; Folnsbee, L.; Gates, G.; Hasset, D.; Lonobile, D.; Magoon, J.; et al

    2015-01-12

    Here, an upgrade of the pulsed magnetic field generator magneto-inertial fusion electrical discharge system [O. Gotchev et al., Rev. Sci. Instrum. 80, 043504 (2009)] is described. The device is used to study magnetized high-energy-density plasma and is capable of producing a pulsed magnetic field of tens of tesla in a volume of a few cubic centimeters. The magnetic field is created by discharging a high-voltage capacitor through a small wire-wound coil. The coil current pulse has a duration of about 1 μs and a peak value of 40 kA. Compared to the original, the updated version has a larger energymore » storage and improved switching system. In addition, magnetic coils are fabricated using 3-D printing technology which allows for a greater variety of the magnetic field topology.« less

  11. Note: Control of liquid helium supply to cryopanels of Kolkata superconducting cyclotron

    SciTech Connect

    Bhattacharyya, T. K. Pal, G.

    2015-02-15

    The Kolkata superconducting cyclotron utilises liquid helium to cool the main magnet niobium-titanium (NbTi) coil and the cryopanels. Three liquid helium cooled cryopanels, placed inside the dees of the radio-frequency system, maintain the high vacuum in the acceleration region of the superconducting cyclotron. The small cryostat placed inside the cryogenic distribution manifold located at the basement of the superconducting cyclotron building supplies liquid helium in parallel branches to three cold heads, used for cooling their associated cryopanels. The level in the cryostat has to be maintained at an optimum value to ensure uninterrupted flow of liquid helium to these three cold heads. This paper describes the transfer function of the overall system, its tuning parameters, and discusses the actual control of cryostat level by using these parameters.

  12. Note: Experimental platform for magnetized high-energy-density plasma studies at the omega laser facility

    SciTech Connect

    Fiksel, G.; Agliata, A.; Barnak, D.; Brent, G.; Chang, P. -Y.; Folnsbee, L.; Gates, G.; Hasset, D.; Lonobile, D.; Magoon, J.; Mastrosimone, D.; Shoup, III, M. J.; Betti, R.

    2015-01-12

    Here, an upgrade of the pulsed magnetic field generator magneto-inertial fusion electrical discharge system [O. Gotchev et al., Rev. Sci. Instrum. 80, 043504 (2009)] is described. The device is used to study magnetized high-energy-density plasma and is capable of producing a pulsed magnetic field of tens of tesla in a volume of a few cubic centimeters. The magnetic field is created by discharging a high-voltage capacitor through a small wire-wound coil. The coil current pulse has a duration of about 1 μs and a peak value of 40 kA. Compared to the original, the updated version has a larger energy storage and improved switching system. In addition, magnetic coils are fabricated using 3-D printing technology which allows for a greater variety of the magnetic field topology.

  13. Introduction to the Value of Program Evaluation Case Study Series |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Introduction to the Value of Program Evaluation Case Study Series Introduction to the Value of Program Evaluation Case Study Series Case Studies Show the Value of Program Evaluation, part of the Value of Program Evaluation Case Study Series, sponsored by the U.S. Department of Energy, November 2009. Case Studies Show the Value of Program Evaluation (124.48 KB) More Documents & Publications Evaluation Helps Pesticide Program Finish Project Four Years Sooner Than

  14. Determining the U-value of a wall from field measurements of heat flux and surface temperatures

    SciTech Connect

    Modera, M.P.; Sherman, M.H.; Sonderegger, R.C.

    1986-05-01

    Thermal conductances (U-values) and thermal resistances (R-values) are discussed throughout the literature as the appropriate parameters for characterizing heat transfer through walls. Because the quoted numbers are usually determined from the handbook values of material properties, they have several drawbacks: (1) they do not take into account degradation effects, (2) they ignore construction irregularities, and (3) they do not take into account multi-dimensional heat flow. This paper examines the use of field measurements of heat flow and surface temperatures to determine the U-values of walls. The effects of thermal mass on measurements of wall U-values are described in detail, using two data interpretation techniques to estimate the U-values of insulated and uninsulated cavity walls, with and without brick facing. The errors in U-value estimation are determined by comparison with an analytical model of wall thermal performance. For each wall, the error in the U-value determination is plotted as a function of test length for several typical weather conditions. For walls with low thermal mass, such as an fiberglass-insulated cavity wall, it appears that, under favorable test conditions, a 6-hour measurement is adequate to measure the U-value within about 10% uncertainty. For masonary walls, the measurement time required is considerably longer than 6 hours. It is shown that for masonry walls, and in general, the optimal measurement time is a multiple of 24 hours due to the effects of diurnal weather fluctuations.

  15. SEPARATION OF PLUTONIUM VALUES FROM OTHER METAL VALUES IN AQUEOUS SOLUTIONS BY SELECTIVE COMPLEXING AND ADSORPTION

    DOEpatents

    Beaton, R.H.

    1960-06-28

    A process is given for separating tri- or tetravalent plutonium from fission products in an aqueous solution by complexing the fission products with oxalate, tannate, citrate, or tartrate anions at a pH value of at least 2.4 (preferably between 2.4 and 4), and contacting a cation exchange resin with the solution whereby the plutonium is adsorbed while the complexed fission products remain in solution.

  16. Summary Notes from 28 May 2008 Generic Technical Issue Discussion on Estimating Waste Inventory and Waste Tank Characterization

    Office of Environmental Management (EM)

    8, 2008 Page 1 of 8 Summary Notes from 28 May 2008 Generic Technical Issue Discussion on Estimating Waste Inventory and Waste Tank Characterization Attendees: Representatives from Department of Energy-Headquarters (DOE-HQ) and the U.S. Nuclear Regulatory Commission staff (NRC) met at the DOE offices in Germantown, Maryland on 28 May 2008. Representatives from Department of Energy- Savannah River (DOE-SR), Department of Energy-Richland (DOE-RL), and Department of Energy-River Protection (DOE-ORP)

  17. Technical Note: Building a combined cyclotron and MRI facility: Implications for interference

    SciTech Connect

    Hofman, Mark B. M.; Kuijer, Joost P. A.; Ridder, Jan Willem de; Perk, Lars R.; Verdaasdonk, Rudolf M.

    2013-01-15

    Purpose: With the introduction of hybrid PET/MRI systems, it has become more likely that the cyclotron and MRI systems will be located close to each other. This study considered the interference between a cyclotron and a superconducting MRI system. Methods: Interactions between cyclotrons and MRIs are theoretically considered. The main interference is expected to be the perturbation of the magnetic field in the MRI due to switching on or off the magnetic field of the cyclotron. MR imaging is distorted by a dynamic spatial gradient of an external inplane magnetic field larger than 0.5-0.04 {mu}T/m, depending on the specific MR application. From the design of a cyclotron, it is expected that the magnetic fringe field at large distances behaves as a magnetic dipolar field. This allows estimation of the full dipolar field and its spatial gradients from a single measurement. Around an 18 MeV cyclotron (Cyclone, IBA), magnetic field measurements were performed on 5 locations and compared with calculations based upon a dipolar field model. Results: At the measurement locations the estimated and measured values of the magnetic field component and its spatial gradients of the inplane component were compared, and found to agree within a factor 1.1 for the magnetic field and within a factor of 1.5 for the spatial gradients of the field. In the specific case of the 18 MeV cyclotron with a vertical magnetic field and a 3T superconducting whole body MR system, a minimum distance of 20 m has to be considered to prevent interference. Conclusions: This study showed that a dipole model is sufficiently accurate to predict the interference of a cyclotron on a MRI scanner, for site planning purposes. The cyclotron and a whole body MRI system considered in this study need to be placed more than 20 m apart, or magnetic shielding should be utilized.

  18. METHOD OF SEPARATING TETRAVALENT PLUTONIUM VALUES FROM CERIUM SUB-GROUP RARE EARTH VALUES

    DOEpatents

    Duffield, R.B.; Stoughton, R.W.

    1959-02-01

    A method is presented for separating plutonium from the cerium sub-group of rare earths when both are present in an aqueous solution. The method consists in adding an excess of alkali metal carbonate to the solution, which causes the formation of a soluble plutonium carbonate precipitate and at the same time forms an insoluble cerium-group rare earth carbonate. The pH value must be adjusted to bctween 5.5 and 7.5, and prior to the precipitation step the plutonium must be reduced to the tetravalent state since only tetravalent plutonium will form the soluble carbonate complex.

  19. 2D Gridded Surface Data Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 2D Gridded Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This ... DOESC-ARMTR-152 2D Gridded Surface Data Value-Added Product Version 1.0 Q Tang S Xie ...

  20. Simulating the Value of Concentrating Solar Power with Thermal...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a ... DE-AC36-08GO28308 Simulating the Value of Concentrating Solar Power with Thermal Energy ...

  1. Value of Concentrating Solar Power and Thermal Energy Storage

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL-TP-6A2-45833 February 2010 The Value of Concentrating Solar Power and Thermal Energy ... February 2010 The Value of Concentrating Solar Power and Thermal Energy Storage Ramteen ...

  2. NREL Quantifies Value of CSP to the Grid (Fact Sheet)

    SciTech Connect

    Not Available

    2014-08-01

    In California study, greater penetration of renewable energy means greater value of CSP with thermal energy storage.

  3. Superior Energy Performance: Getting the Most Value from ISO 50001 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Superior Energy Performance: Getting the Most Value from ISO 50001 Superior Energy Performance: Getting the Most Value from ISO 50001 This presentation describes ISO 50001 and explains how Superior Energy Performance can help get the most value from implementation of an Energy Management Standard. Superior Energy Performance: Getting the Most Value from ISO 50001 (March 13, 2012) (1.73 MB) More Documents & Publications Becoming a Certified Practitioner or a Certified

  4. RECOVERY AND SEPARATION OF LITHIUM VALUES FROM SALVAGE SOLUTIONS

    DOEpatents

    Hansford, D.L.; Raabe, E.W.

    1963-08-20

    Lithium values can be recovered from an aqueous basic solution by reacting the values with a phosphate salt soluble in the solution, forming an aqueous slurry of the resultant aqueous insoluble lithium phosphate, contacting the slurry with an organic cation exchange resin in the acid form until the slurry has been clarified, and thereafter recovering lithium values from the resin. (AEC)

  5. Method for selectively reducing plutonium values by a photochemical process

    DOEpatents

    Friedman, Horace A.; Toth, Louis M.; Bell, Jimmy T.

    1978-01-01

    The rate of reduction of Pu(IV) to Pu(III) in nitric acid solution containing a reducing agent is enhanced by exposing the solution to 200-500 nm electromagnetic radiation. Pu values are recovered from an organic extractant solution containing Pu(IV) values and U(VI) values by the method of contacting the extractant solution with an aqueous nitric acid solution in the presence of a reducing agent and exposing the aqueous solution to electromagnetic radiation having a wavelength of 200-500 nm. Under these conditions, Pu values preferentially distribute to the aqueous phase and U values preferentially distribute to the organic phase.

  6. Improving consumer value through enhanced performance around the world

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Improving consumer value through enhanced performance around the world Improving consumer value through enhanced performance around the world LANL statistical tools have helped create Reliability Technology (RT), which increases the overall fraction of productive manufacturing time, or "uptime," for its internal manufacturing lines. April 3, 2012 Improving consumer value through enhanced performance around the world Reliability Technology (RT) is a comprehensive reliability engineering

  7. Estimating the Value of Electricity Storage Resources in Electricity

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Markets - EAC 2011 | Department of Energy Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The purpose of this report is to assist the U.S. Department of Energy (DOE) in 1) establishing a framework for understanding the role electricity storage resources (storage) can play in wholesale and retail electricity markets, 2) assessing the value of electricity storage in a

  8. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review | Department of Energy Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, University of Pennsylvania View the Presentation CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review (771.97 KB) More Documents & Publications Market Engagement Overview - 2015 BTO Peer Review Commercial Buildings Integration Program Overview - 2015 BTO Peer

  9. Atmospheric Radiation Measurement (ARM) Value-Added Data Products

    Office of Scientific and Technical Information (OSTI)

    (Including Evaluated Data Sets) () | Data Explorer Value-Added Data Products (Including Evaluated Data Sets) Title: Atmospheric Radiation Measurement (ARM) Value-Added Data Products (Including Evaluated Data Sets) Many of the scientific needs of the ARM Program are met through the analysis and processing of existing data products into "value-added" products or VAPs. Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are

  10. The Value of Distributed Solar Electric Generation to San Antonio

    SciTech Connect

    Jones, Nic; Norris, Ben; Meyer, Lisa

    2013-02-14

    This report presents an analysis of value provided by grid-connected, distributed PV in San Antonio from a utility perspective. The study quantified six value components, summarized in Table ES- 1. These components represent the benefits that accrue to the utility, CPS Energy, in accepting solar onto the grid. This analysis does not treat the compensation of value, policy objectives, or cost-effectiveness from the retail consumer perspective.

  11. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of January 14, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  12. Enhancing Earned Value (EV) Analysis Using Project Assessment...

    Energy Saver

    Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This ...

  13. Texas: City of San Antonio Demonstrates Value of Greater Investments...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Greater Investments in Clean Energy Texas: City of San Antonio Demonstrates Value ... in efficient and renewable energy and water conservation can create jobs and stimulate ...

  14. Earned Value Management System (EVMS) - DOE Directives, Delegations...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    0A, Earned Value Management System (EVMS) by Rick Blaisdell Functional areas: Capital Assets, Contract Management, Program Management, Project Management This Guide provides...

  15. History, Applications, Numerical Values and Problems with the...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Numerical Values and Problems with the Calculation of EROI (Energy Return on Energy Investment) Professor Charles Hall State University of NY College of Environmental Science and...

  16. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    3 CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of May 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green ...

  17. Level: National and Regional Data; Row: Values of Shipments and...

    Annual Energy Outlook

    2 Consumption Ratios of Fuel, 2010; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption ...

  18. Level: National and Regional Data; Row: Values of Shipments and...

    Gasoline and Diesel Fuel Update

    2 Consumption Ratios of Fuel, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption ...

  19. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1-September 30, 2012 Citation Details In-Document Search Title: ARM Climate Research Facility ...

  20. Ecological Screening Values for Surface Water, Sediment, and...

    Office of Scientific and Technical Information (OSTI)

    Ecological Screening Values for Surface Water, Sediment, and Soil Friday, G. P. 54 ENVIRONMENTAL SCIENCES; SOILS; SURFACE WATERS; SEDIMENTS; ECOLOGICAL CONCENTRATION; ENVIRONMENTAL...

  1. Earned Value Management System Gold Card | Department of Energy

    Energy Saver

    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides ...

  2. Level: National Data; Row: Values of Shipments within NAICS Codes...

    Energy Information Administration (EIA) (indexed site)

    2006; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar ...

  3. Level: National Data; Row: Values of Shipments within NAICS Codes...

    Annual Energy Outlook

    2010; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar ...

  4. An Initial Value of Information (VOI) Framework for Geophysical...

    OpenEI (Open Energy Information) [EERE & EIA]

    Exploration of Geothermal Energy Abstract We present a value of information (VOI) methodology for the exploration geothermal problem. VOI quantifies how relevant any particular...

  5. Deriving value from wet and gaseous waste streams.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Deriving value from wet and gaseous waste streams. Assessing the real value of "higher value products" Setting realistic assumption and avoid common pitfalls Luca Zullo VerdeNero LLC luca.zullo@verdenero.com 651-270-6478 My technology works great and my feedstock is a no value waste! Thermodynamics and process economics are not very different Reactants Products G1 G2 $2 $1 G<0 $>0 Ea Project development and capital cost It is never too early to think about economics! Feedstock

  6. Livermore Field Office sets core values as part of continuous...

    National Nuclear Security Administration (NNSA)

    At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, ...

  7. Valuing Green in the Appraisal Process - Building America Top...

    Energy Saver

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  8. Module 1 - Introduction to Earned Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and defines the framework necessary for proper Earned Value management implementation. ... Module 7 - Integrated Baseline Review and Change Control Module 8 - Reporting

  9. Quantifying Fl Value of Hydro in Transmission Grid | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quantifying Fl Value of Hydro in Transmission Grid 72hydrogridserviceseprikey.ppt (3.96 MB) More Documents & Publications Enviro effects of hydrokinetic turbines on fish ...

  10. Double-{beta} decay Q value of {sup 150}Nd

    SciTech Connect

    Kolhinen, V. S.; Eronen, T.; Gorelov, D.; Hakala, J.; Jokinen, A.; Kankainen, A.; Moore, I. D.; Rissanen, J.; Saastamoinen, A.; Suhonen, J.; Aeystoe, J. [Department of Physics, P. O. Box 35 (YFL), FI-40014 University of Jyvaeskylae (Finland)

    2010-08-15

    The double-{beta} decay Q value of {sup 150}Nd was determined by using the JYFLTRAP Penning trap mass spectrometer. The measured mass difference between {sup 150}Nd and {sup 150}Sm is 3371.38(20) keV. This new value deviates by 3.7 keV from the previously adopted value of 3367.7(22) keV and is a factor of 10 more precise. Accurate knowledge of this Q value is important because {sup 150}Nd is a primary candidate to be used in the search for neutrinoless double-{beta} decay modes in several experiments.

  11. Two small businesses selected for work valued at $80 million

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Businesses compete for drilling, monitoring work Two small businesses selected for work valued at 80 million Two small businesses compete for up to 80 million in well drilling ...

  12. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of April 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green ...

  13. The Purpose and Value of Successful Technology Demonstrations...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical...

  14. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of December 2, 2015) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  15. Shared Value in Utility and Efficiency Partnerships | Department...

    Energy.gov [DOE] (indexed site)

    Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local...

  16. Bioenergy Demonstration Project: Value-Added Products from Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bioenergy Demonstration Project: Value-Added Products from Renewable Fuels May 23, 2013 Technology Area Review: Biochemical Conversion Paul Blum University of Nebraska 2 Goal ...

  17. Superior Energy Performance: Getting the Most Value from ISO...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Superior Energy Performance cm : Getting the Most Value from ISO 50001- Energy Management Systems US Department of Energy Advanced Manufacturing Office March 13, 2012 Aimee McKane ...

  18. Enhancing Earned Value (EV) Analysis Using Project Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This ...

  19. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect

    Sivaraman, Chitra

    2014-11-21

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility.

  20. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    3 CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of June 10, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  1. Fuel Tables.indd

    Gasoline and Diesel Fuel Update

    Where shown, (s) Physical unit value less than 0.5 or Btu value less than 0.05. Notes: * There are no direct fuel costs for hydroelectric power. * Totals may not equal sum of ...

  2. DOE: Quantifying the Value of Hydropower in the Electric Grid

    SciTech Connect

    2012-12-31

    The report summarizes research to Quantify the Value of Hydropower in the Electric Grid. This 3-year DOE study focused on defining value of hydropower assets in a changing electric grid. Methods are described for valuation and planning of pumped storage and conventional hydropower. The project team conducted plant case studies, electric system modeling, market analysis, cost data gathering, and evaluations of operating strategies and constraints. Five other reports detailing these research results are available a project website, www.epri.com/hydrogrid. With increasing deployment of wind and solar renewable generation, many owners, operators, and developers of hydropower have recognized the opportunity to provide more flexibility and ancillary services to the electric grid. To quantify value of services, this study focused on the Western Electric Coordinating Council region. A security-constrained, unit commitment and economic dispatch model was used to quantify the role of hydropower for several future energy scenarios up to 2020. This hourly production simulation considered transmission requirements to deliver energy, including future expansion plans. Both energy and ancillary service values were considered. Addressing specifically the quantification of pumped storage value, no single value stream dominated predicted plant contributions in various energy futures. Modeling confirmed that service value depends greatly on location and on competition with other available grid support resources. In this summary, ten different value streams related to hydropower are described. These fell into three categories; operational improvements, new technologies, and electricity market opportunities. Of these ten, the study was able to quantify a monetary value in six by applying both present day and future scenarios for operating the electric grid. This study confirmed that hydropower resources across the United States contribute significantly to operation of the grid in terms

  3. Value of Concentrating Solar Power and Thermal Energy Storage

    SciTech Connect

    Sioshansi, R.; Denholm, P.

    2010-02-01

    This paper examines the value of concentrating solar power (CSP) and thermal energy storage (TES) in four regions in the southwestern United States. Our analysis shows that TES can increase the value of CSP by allowing more thermal energy from a CSP plant?s solar field to be used, by allowing a CSP plant to accommodate a larger solar field, and by allowing CSP generation to be shifted to hours with higher energy prices. We analyze the sensitivity of CSP value to a number of factors, including the optimization period, price and solar forecasting, ancillary service sales, capacity value and dry cooling of the CSP plant. We also discuss the value of CSP plants and TES net of capital costs.

  4. Note on gravitational baryogenesis

    SciTech Connect

    Sadjadi, H. Mohseni

    2007-12-15

    The coupling between Ricci scalar curvature and the baryon number current dynamically breaks CPT in an expanding universe and leads to baryon asymmetry. We study the effect of time dependence of the equation of state parameter of the Friedmann-Robertson-Walker universe on this asymmetry.

  5. Appendix A Explanatory Notes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    September 2016 98 U.S. Energy Information Administration | Natural Gas Monthly Dakota, Ohio, Pennsylvania, Utah, and West Virginia) were added to the EIA-914 data collection and ...

  6. ALARA notes, Number 8

    SciTech Connect

    Khan, T.A.; Baum, J.W.; Beckman, M.C.

    1993-10-01

    This document contains information dealing with the lessons learned from the experience of nuclear plants. In this issue the authors tried to avoid the `tyranny` of numbers and concentrated on the main lessons learned. Topics include: filtration devices for air pollution abatement, crack repair and inspection, and remote handling equipment.

  7. Notes for Greenbook Process

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    wrote it * Difficult to extract requirements * Needed to be "more even" tech edited * Latex is not immediately compatible with web-based text * Too complex for non-involved *...

  8. Appendix A Explanatory Notes

    Energy Information Administration (EIA) (indexed site)

  9. Meeting Summary Notes

    Office of Environmental Management (EM)

    ... They are interested in developing a mobile version of TRANSCOM. They have been looking at Microsoft SQL as a move from ORACLE but no decisions for changes at this time. Closing ...

  10. Notes and Action Items

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rick Kendall, Tom Kitchens, Horst Simon SubCommittee on Visualization and Graphics Software Responsibility: JN Leboeuf, Judy Giarrusso, Steve Jardin, and Steve Lau Actions:...

  11. Manhattan Project: Potsdam Note

    Office of Scientific and Technical Information (OSTI)

    Potsdam, July 19, 1945 (Truman wrote the above on the back of this). Click on a link below to return to: Espionage and the Manhattan Project, 1940-1945 Library Potsdam and the ...

  12. Notes and Definitions

    Weekly Natural Gas Storage Report

    Oklahoma, and Texas Mountain Region Arizona, Colorado, Idaho, Montana, Nebraska, New Mexico, Nevada, North Dakota, South Dakota, Utah, and Wyoming Pacific Region California,...

  13. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    area (unanimous) * Focus Area 2 (Adequate NQA-1 Suppliers) - Board voted to close the ... The focus areas to be further defined will include: * NQA-1 Suppliers * Commercial Grade ...

  14. Measuring industrial energy efficiency: Physical volume versus economic value

    SciTech Connect

    Freeman, S.L.; Niefer, M.J.; Roop, J.M.

    1996-12-01

    This report examines several different measures of industrial output for use in constructing estimates of industrial energy efficiency and discusses some reasons for differences between the measures. Estimates of volume-based measures of output, as well as 3 value-based measures of output (value of production, value of shipments, and value added), are evaluated for 15 separate 4-digit industries. Volatility, simple growth rate, and trend growth rate estimates are made for each industry and each measure of output. Correlations are made between the volume- and value-based measures of output. Historical energy use data are collected for 5 of the industries for making energy- intensity estimates. Growth rates in energy use, energy intensity, and correlations between volume- and value-based measures of energy intensity are computed. There is large variability in growth trend estimates both long term and from year to year. While there is a high correlation between volume- and value-based measures of output for a few industries, typically the correlation is low, and this is exacerbated for estimates of energy intensity. Analysis revealed reasons for these low correlations. It appears that substantial work must be done before reliable measures of trends in the energy efficiency of industry can be accurately characterized.

  15. The social values at risk from sea-level rise

    SciTech Connect

    Graham, Sonia; Barnett, Jon; Fincher, Ruth; Hurlimann, Anna; Mortreux, Colette; Waters, Elissa

    2013-07-15

    Analysis of the risks of sea-level rise favours conventionally measured metrics such as the area of land that may be subsumed, the numbers of properties at risk, and the capital values of assets at risk. Despite this, it is clear that there exist many less material but no less important values at risk from sea-level rise. This paper re-theorises these multifarious social values at risk from sea-level rise, by explaining their diverse nature, and grounding them in the everyday practices of people living in coastal places. It is informed by a review and analysis of research on social values from within the fields of social impact assessment, human geography, psychology, decision analysis, and climate change adaptation. From this we propose that it is the lived values of coastal places that are most at risk from sea-level rise. We then offer a framework that groups these lived values into five types: those that are physiological in nature, and those that relate to issues of security, belonging, esteem, and self-actualisation. This framework of lived values at risk from sea-level rise can guide empirical research investigating the social impacts of sea-level rise, as well as the impacts of actions to adapt to sea-level rise. It also offers a basis for identifying the distribution of related social outcomes across populations exposed to sea-level rise or sea-level rise policies.

  16. Erosion control for the Fundamental values in NEPA

    SciTech Connect

    McMillen, M.C.; Hinds, W.T.

    1997-08-01

    A commitment to exploring alternatives to major Federal actions, pursuing and facilitating public involvement, and identifying measures to mitigate the adverse effects of actions selected for implementation are important values of the National Environmental Policy Act (NEPA) process. While other major environmental legislation may commit an agency to different aspects of environmental review and protection, no other Federal statute combines the unique values that NEPA does. Since its enactment over 26 years ago, NEPA has faced numerous challenges to its fundamental intent and values. Recently, processes deemed to be, or assumed to be, functionally equivalent have attempted to subsume important NEPA values while allowing major Federal actions to proceed without NEPA`s environmental review. This paper examines the concept and origin of the term NEPA values, and the effects of judicial review and actions such as DOE`s NEPA/CERCLA integration agreement, have had on maintaining fundamental NEPA values in the Federal decision making process. In addition, based on concerns that are building momentum in the US Congress, a brief discussion will be included exploring what may occur in the future to prevent further erosion of fundamental NEPA values.

  17. ESTIMATED NEPTUNIUM SEDIMENT SORPTION VALUES AS A FUNCTION OF PH AND MEASURED BARIUM AND RADIUM KD VALUES

    SciTech Connect

    Kaplan, D.

    2011-01-13

    The objective of this document is to provide traceability and justification for a select few new geochemical data used in the Special Analysis entitled 'Special Analysis for the Dose Assessment of the Final Inventories in Center Slit Trenches One through Five'. Most values used in the Special Analysis came from the traditional geochemical data package, however, some recent laboratory measurements have made it possible to estimate barium K{sub d} values. Additionally, some recent calculations were made to estimate neptunium K{sub d} values as a function of pH. The assumptions, justifications, and calculations needed to generate these new values are presented in this document, and the values are summarized.

  18. NREL: State and Local Governments - Value-of-Solar Tariffs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Value-of-Solar Tariffs A value-of-solar (VOS) tariff is a rate design policy that gives customers with solar installations credit for the electricity generated by a photovoltaic (PV) system. Utility customers with distributed PV panels on their homes or businesses can give power to and take power from the grid. A VOS tariff clarifies how much energy is sold in each direction (customer to utility and utility to customer) and at what rate the energy is valued. A VOS tariff should not be confused

  19. The value of post-extracted algae residue

    DOE PAGES [OSTI]

    Bryant, Henry; Gogichaishvili, Ilia; Anderson, David; Richardson, James; Sawyer, Jason; Wickersham, Tryon; Drewery, Merritt

    2012-07-26

    This paper develops a hedonic pricing model for post-extracted algae residue (PEAR), which can be used for assessing the economic feasibility of an algal production enterprise. Prices and nutritional characteristics of commonly employed livestock feed ingredients are used to estimate the value of PEAR based on its composition. We find that PEAR would have a value lower than that of soybean meal in recent years. The value of PEAR will vary substantially based on its characteristics. PEAR could have generated algal fuel co-product credits that in recent years would have ranged between $0.95 and $2.43 per gallon of fuel produced.

  20. Case Studies Show the Value of Program Evaluation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    
 1
 Case Studies Show the Value of Program Evaluation Value of Program Evaluation Case Study Series Sponsored by the U.S. Department of Energy, November 2009 The U.S Department of Energy sponsored several small case studies that clearly demonstrate the benefits that evaluation can provide to energy and environmental programs. The result is a set of five "Value of Program Evaluation" Case Studies (each 2-pages in length) documenting the benefits of implementing recommendations from

  1. The Value of Energy Storage for Grid Applications

    Energy.gov [DOE]

    Electricity storage can provide multiple benefits to the grid, including the ability to levelize load, provide ancillary services, and provide firm capacity. Historically, it has been difficult to compare the value of electricity storage to alternative generation resources using simplified metrics, such as levelized cost of energy. To properly value energy storage requires detailed time-series simulations using software tools that can co-optimize multiple services provided by different storage technologies. This analysis uses a commercial grid simulation tool to examine the potential value of different general classes of storage devices when providing both energy and ancillary services.

  2. Value of a Smart Grid System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Value of a Smart Grid System Value of a Smart Grid System Implementing a Smart Grid is the effort to move the electric grid from a "static" to a "dynamic" state. Doing so improves the efficiency, reliability and cost-effectiveness of the electrical system's operations, planning and maintenance and creates a system that is interactive with consumers and markets, allowing better energy and dollar savings. Below we summarize the value of the Smart Grid from six perspectives.

  3. THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 More Documents & Publications Economic Dispatch of Electric ...

  4. Object detection with a multistatic array using singular value decomposition

    DOEpatents

    Hallquist, Aaron T.; Chambers, David H.

    2014-07-01

    A method and system for detecting the presence of subsurface objects within a medium is provided. In some embodiments, the detection system operates in a multistatic mode to collect radar return signals generated by an array of transceiver antenna pairs that is positioned across a surface and that travels down the surface. The detection system converts the return signals from a time domain to a frequency domain, resulting in frequency return signals. The detection system then performs a singular value decomposition for each frequency to identify singular values for each frequency. The detection system then detects the presence of a subsurface object based on a comparison of the identified singular values to expected singular values when no subsurface object is present.

  5. Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M. 24 POWER TRANSMISSION AND...

  6. Earned Value (EV) Analysis and Project Assessment & Reporting...

    Office of Environmental Management (EM)

    staff to the Secretary of Energy will have easy access to the same data. EarnedValue-EV-AnalysisProjectAssessmentReportingSystem-PARS IIPresentationJanuary2013.pdf More...

  7. ARM Evaluation Product : Droplet Number Concentration Value-Added...

    Office of Scientific and Technical Information (OSTI)

    They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol ...

  8. How to Estimate the Value of Service Reliability Improvements

    SciTech Connect

    Sullivan, Michael J.; Mercurio, Matthew G.; Schellenberg, Josh A.; Eto, Joseph H.

    2010-06-08

    A robust methodology for estimating the value of service reliability improvements is presented. Although econometric models for estimating value of service (interruption costs) have been established and widely accepted, analysts often resort to applying relatively crude interruption cost estimation techniques in assessing the economic impacts of transmission and distribution investments. This paper first shows how the use of these techniques can substantially impact the estimated value of service improvements. A simple yet robust methodology that does not rely heavily on simplifying assumptions is presented. When a smart grid investment is proposed, reliability improvement is one of the most frequently cited benefits. Using the best methodology for estimating the value of this benefit is imperative. By providing directions on how to implement this methodology, this paper sends a practical, usable message to the industry.

  9. Value of Improved Short-Term Wind Power Forecasting

    SciTech Connect

    Hodge, B. M.; Florita, A.; Sharp, J.; Margulis, M.; Mcreavy, D.

    2015-02-01

    This report summarizes an assessment of improved short-term wind power forecasting in the California Independent System Operator (CAISO) market and provides a quantification of its potential value.

  10. G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value...

    Office of Scientific and Technical Information (OSTI)

    G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product Citation Details In-Document Search Title: G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) ...

  11. Department of Energy Earned Value Management Survey Results

    Energy.gov [DOE]

    Humphreys & Associates, Inc. (H&A) conducted a survey of Department of Energy (DOE) Earned Value Management (EVM) and Project Management (PM) stakeholders.  Two versions of the survey were...

  12. Sales and Value Recognition for Zero Energy Ready Home Webinar...

    Energy Saver

    ... Now, anyone can go into this database here and plug in an ... The PV Value Tool offers a free Web-based tool that I'm ... So we all play a part in that. As Laura has already talked ...

  13. Gyrotron cavity resonator with an improved value of Q

    DOEpatents

    Stone, David S.; Shively, James F.

    1982-10-26

    A gyrotron cavity resonator is connected smoothly and directly to an output waveguide with a very gradually tapered wall so that values of external Q lower than twice the diffraction limit are obtainable.

  14. ZERH Webinar: Sales and Value Recognition of Zero Energy Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes December 18, 2014 12:00PM to 1:15PM EST GoToWebinar The U.S. Department of Energy Zero Energy Ready Home (ZERH) ...

  15. Biopower Report Presents Methodology for Assessing the Value...

    Energy Saver

    Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants November 20, 2014 - 12:22pm ...

  16. Variance control in weak-value measurement pointers

    SciTech Connect

    Parks, A. D.; Gray, J. E.

    2011-07-15

    The variance of an arbitrary pointer observable is considered for the general case that a complex weak value is measured using a complex valued pointer state. For the typical cases where the pointer observable is either its position or momentum, the associated expressions for the pointer's variance after the measurement contain a term proportional to the product of the weak value's imaginary part with the rate of change of the third central moment of position relative to the initial pointer state just prior to the time of the measurement interaction when position is the observable--or with the initial pointer state's third central moment of momentum when momentum is the observable. These terms provide a means for controlling pointer position and momentum variance and identify control conditions which, when satisfied, can yield variances that are smaller after the measurement than they were before the measurement. Measurement sensitivities which are useful for estimating weak-value measurement accuracies are also briefly discussed.

  17. ,"U.S. Natural Gas Wellhead Value and Marketed Production"

    Energy Information Administration (EIA) (indexed site)

    Value and Marketed Production" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural...

  18. Template:LabelValuePair | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    is typically used to display the results of an ask or sparql query in a simple label: value format. It is used by many pages, including the sub pages for country profiles, and is...

  19. Panel on Resource Efficiency and Supply Chain/Value Chain

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Panel on Resource Efficiency and Supply Chain/Value Chain: Session 1- Water / Energy / Materials Nexus Session 2 - Advanced Manufacturing through the Supply Chain / Value Chain AMO Peer Review Meeting June 14, 2016 Joe Cresko, DOE-AMO William Morrow, LBNL Samantha Reese, NREL Diane Graziano, ANL Sachin Nimbalkar, ORNL Water - Energy -Materials Nexus Water - Energy - Materials Nexus: Research Questions What are the foundational, interdependent effects of energy, water, and materials consumption

  20. Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    System (PARS II) - Road Show Presentation | Department of Energy Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This presentation was provided by the DOE Office of Project Management Oversight and Assessments (formerly DOE Office of Acquisition and Project Management) in January 2013. It is about the

  1. Toward a New Paradigm for Valuing Demand Response

    SciTech Connect

    Earle, Robert; Faruqui, Ahmad

    2006-05-15

    There is value in DR, but it needs to be evaluated correctly. The pricing experiment in California showed that well-designed dynamic pricing programs can have a significant impact on critical peak loads, and California's investor-owned utilities are using the experimental results to develop business cases for advanced metering. A key question in developing these business cases is how much value to attach to a kW of load that is curtailed during critical times. (author)

  2. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    Office of Scientific and Technical Information (OSTI)

    (Dataset) | Data Explorer Evaluation Product : Droplet Number Concentration Value-Added Product Title: ARM Evaluation Product : Droplet Number Concentration Value-Added Product Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo

  3. Interpolated Sounding and Gridded Sounding Value-Added Products (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Interpolated Sounding and Gridded Sounding Value-Added Products Citation Details In-Document Search Title: Interpolated Sounding and Gridded Sounding Value-Added Products Standard Atmospheric Radiation Measurement (ARM) Climate Research Facility sounding files provide atmospheric state data in one dimension of increasing time and height per sonde launch. Many applications require a quick estimate of the atmospheric state at higher time resolution. The

  4. Unlocking Customer Value: The Virtual Power Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant The utility world has changed drastically in the last 10 years. New technologies like Smart Meters and fully functional Smart Grid concepts have made large inroads into the utility space and no one should want to be left behind. Utilities also face additional pressures from regulatory bodies who are continuing to encourage carbon reduction and greater customer flexibility. Utilities need to

  5. CALCULATION OF STOPPING POWER VALUES AND RANGES OF FAST IONS.

    Energy Science and Technology Software Center

    2003-03-18

    STOPOW calculates a set of stopping power values and ranges of fast ions in matter for any materials. Furthermore STOPOW can calculate a set of values for one special auxiliary function (e.g. kinematic factors, track structure parameters, time of flight or correction factors in the stopping function) . The user chooses the physical units for stopping powers and ranges and the energy range for calculations.

  6. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  7. Prototype indicators of value added through public involvement

    SciTech Connect

    Lach, D.; Hixson, P.; Ramonas, L.

    1995-12-01

    As more managers realize that public input in public sector decision making is a given in the current political and social climate, many are turning to public involvement as a way to manage input so that it is beneficial to their decisions and projects. Public involvement is starting to become a familiar way of doing business for many Federal agencies and its contractors. Yet, many, if not most agency and contractor managers are still unclear about the value and costs that public involvement adds to their projects. Proponents claim that public involvement increases the acceptability of project goals by increasing stakeholders` knowledge about and involvement in decisions of importance to them. In spite of these assertions avowing the benefits of public involvement, proponents have not generated methods that demonstrate or provide evidence of such value added through incorporating public involvement into projects. As these questions about the value and costs of public involvement efforts increase, there is a pressing need to document the value and costs of public involvement for the participants in these processes--the stakeholders--and to present this information to decision makers in ways that help them assess the value and costs of managing public input through a public involvement program.

  8. RECOVERY OF THORIUM AND URANIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Calkins, G.D.

    1958-02-18

    This patent deals with the separation and recovery of uranium from monazite sand. After initial treatment of the sand with sodium hydroxide, a precipitate is obtuined which contains the uranium, thorium, rare earths and some phosphorus. This precipitate is then dissolved in nitric acid. The bulk of the rare earths are removed from thls soiution by adding aa excess of alkali carbonate, causing precipitation of the rare earths together with part of the thorium present. The solution still contains a considerable amount of thorium, some rare earths, and practically all of the uranium originally present. Thorium and rare earth values are readily precipitated from such solution, and the uranium values thus isolated, by the addition of an excess hydrogen peroxide. The pH value of the solution is preferably adjusted to at least 9 prior to the addition of the peroxide.

  9. Extended space expectation values in quantum dynamical system evolutions

    SciTech Connect

    Demiralp, Metin

    2014-10-06

    The time variant power series expansion for the expectation value of a given quantum dynamical operator is well-known and well-investigated issue in quantum dynamics. However, depending on the operator and Hamiltonian singularities this expansion either may not exist or may not converge for all time instances except the beginning of the evolution. This work focuses on this issue and seeks certain cures for the negativities. We work in the extended space obtained by adding all images of the initial wave function under the system Hamiltonians positive integer powers. This requires the introduction of certain appropriately defined weight operators. The resulting better convergence in the temporal power series urges us to call the new defined entities extended space expectation values even though they are constructed over certain weight operators and are somehow pseudo expectation values.

  10. SOLVENT EXTRACTION OF THORIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Warf, J.C.

    1959-04-21

    The separation of thorium values from rare earth metals contained ln aqueous solutions by means of extraction with a water immiscible alkyl phosphate diluted with a hydrocarbon such as hexane is described. While the extraction according to this invention may be carried out from any aqueous salt solution, it is preferred to use solutions containing free mineral acid. Hydrochloric acid and in particular nitric acid are sultable in a concentration ranging from 0.1 to 7 normal. The higher acid concentration results in higher extraction values.

  11. Maryland Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Maryland Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 31 60 39 20 44 29 34 1990's 22 29 33 28 26 22 0 118 63 18 2000's 34 32 22 48 34 46 NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual

  12. Missouri Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Missouri Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4 4 4 4 4 4 1990's 7 19 27 14 8 16 25 5 0 2000's 0 0 0 0 0 0 2010's 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date:

  13. Arizona Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arizona Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 26 10 0 0 0 0 1,360 1990's 2,125 1,225 730 548 691 500 405 401 411 439 2000's 332 266 243 426 306 211 588 634 503 695 2010's 165 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid

  14. Moisture Management for High R-Value Walls

    SciTech Connect

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    This report explains the moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study. In this project, hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones. The modeling program assessed the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage; the report presents results of the study.

  15. Analytic Challenges to Valuing Energy Storage Workshop Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) has coordinated energy storage efforts from a research and development (R&D) perspective – identifying technology needs, metrics, and goals – but DOE and the research and analytic community have struggled with valuing storage at a systems level. Sixteen stakeholders and experts from across the electric power industry, research universities, national laboratories, and federal agencies were invited to join 8 DOE staff members in a workshop on September 19-20, 2011, in Washington, D.C. to discuss the current state of knowledge for grid-scale energy storage and, in particular, the methodologies to assess its value on the grid.

  16. Visualizing Value: Game-Changing Solar Technologies for Homeowners |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Visualizing Value: Game-Changing Solar Technologies for Homeowners Visualizing Value: Game-Changing Solar Technologies for Homeowners July 29, 2016 - 10:00am Addthis Sistine Solar’s completed SolarSkin installation on a Katahdin log cabin. The company’s SolarSkin panels seamlessly blend in with the cabin’s green roof. | Photo Courtesy of Sistine Solar Sistine Solar's completed SolarSkin installation on a Katahdin log cabin. The company's SolarSkin panels

  17. Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product

    SciTech Connect

    Newsom, RK; Sivaraman, C; McFarlane, SA

    2012-10-31

    The purpose of this document is to describe the Raman Lidar Profiles–Temperature (RLPROFTEMP) value-added product (VAP) and the procedures used to derive atmospheric temperature profiles from the raw RL measurements. Sections 2 and 4 describe the input and output variables, respectively. Section 3 discusses the theory behind the measurement and the details of the algorithm, including calibration and overlap correction.

  18. Maryland Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    NA 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) NA 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) NA 1967-2010 Marketed Production (Million Cubic Ft.) 43 34 44 32 20 27

  19. Michigan Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    151,886 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 496,371 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.79 1967-2010 Marketed Production (Million Cubic Ft.) 131,118 138,162 129,333 123,622 115,065 107,634

  20. Mississippi Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    73,721 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 307,738 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.17 1967-2010 Marketed Production (Million Cubic Ft.) 73,721 81,487 63,843 59,272 54,446 58,207

  1. Missouri Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    0 1984-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 0 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 1967-1997 Marketed Production (Million Cubic Ft.) NA NA NA 9 3 1

  2. Montana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    7,539 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 318,286 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.64 1967-2010 Marketed Production (Million Cubic Ft.) 87,539 74,624 66,954 63,242 59,160 57,421

  3. Nebraska Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,231 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 8,888 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.98 1967-2010 Marketed Production (Million Cubic Ft.) 2,231 1,959 1,328 1,032 417 477

  4. Nevada Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    NA 2006-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) NA 0 0 0 0 2006-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) NA 2006-2010 Marketed Production (Million Cubic Ft.) 4 3 4 3 3 3 1991

  5. Alabama Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    212,769 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 994,688 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.46 1967-2010 Marketed Production (Million Cubic Ft.) 222,932 195,581 215,710 196,326 181,060 168,249

  6. Alaska Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    316,546 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,185,249 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.17 1967-2010 Marketed Production (Million Cubic Ft.) 374,226 356,225 351,259 338,182 345,310 343,534

  7. Arizona Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    165 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 753 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.11 1967-2010 Marketed Production (Million Cubic Ft.) 183 168 117 72 106 95

  8. California Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    251,559 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,396,916 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.87 1967-2010 Marketed Production (Million Cubic Ft.) 286,841 250,177 246,822 252,310 238,988 231,060

  9. New York Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    35,241 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 166,532 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.65 1967-2010 Marketed Production (Million Cubic Ft.) 35,813 31,124 26,424 23,458 20,201 17,829

  10. North Dakota Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,837 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 320,783 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.92 1967-2010 Marketed Production (Million Cubic Ft.) 81,837 97,102 172,242 235,711 326,491 471,504

  11. Ohio Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    78,122 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 362,000 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.63 1967-2010 Marketed Production (Million Cubic Ft.) 78,122 78,858 84,482 166,017 512,371 1,014,848

  12. Oregon Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    376 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,919 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.92 1979-2010 Marketed Production (Million Cubic Ft.) 1,407 1,344 770 770 1,142 848 1979

  13. Value of Underground Storage in Today's Natural Gas Industry, The

    Reports and Publications

    1995-01-01

    This report explores the significant and changing role of storage in the industry by examining the value of natural gas storage; short-term relationships between prices, storage levels, and weather; and some longer term impacts of the Federal Energy Regulatory Commission's (FERC) Order 636.

  14. Tennessee Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    5,144 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 22,384 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.35 1967-2010 Marketed Production (Million Cubic Ft.) 5,144 4,851 5,825 5,400 5,294 4,276

  15. Value of Energy Storage for Grid Applications (Report Summary) (Presentation)

    SciTech Connect

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-06-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  16. Utah Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    385,917 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,825,566 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 432,045 457,525 490,393 470,863 454,545 423,300

  17. Indiana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    6,802 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 28,058 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.13 1967-2010 Marketed Production (Million Cubic Ft.) 6,802 9,075 8,814 7,938 6,616 7,25

  18. Kansas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    325,591 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,372,159 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 324,720 309,124 296,299 292,467 286,480 285,236

  19. Kentucky Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    135,355 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 604,675 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.47 1967-2010 Marketed Production (Million Cubic Ft.) 135,330 124,243 106,122 94,665 93,091 85,775

  20. The Value of Energy Storage for Grid Applications

    SciTech Connect

    Denholm, Paul; Jorgenson, Jennie; Hummon, Marissa; Jenkin, Thomas; Palchak, David; Kirby, Brendan; Ma, Ookie; O'Malley, Mark

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  1. Note: Matching index technique for avoiding higher order mode resonance in accelerators: INDUS-2 accelerator as a case study

    SciTech Connect

    Jain, V.; Joshi, S. C.; Bhandarkar, U. V.; Krishnagopal, S.; Centre for Excellence in Basic Sciences, Mumbai 400098

    2013-08-15

    Resonance between circulating beam frequencies and RF cavity Higher Order Modes (HOMs) of accelerators can lead to coupled-bunch instabilities. Shifting these HOMs to avoid the resonance is a topic of active interest. A study has been carried out for the accelerating cavities of the INDUS-2. For quantitative measure of deciding which modes have to be moved and by how much, we introduce a new index called the matching index (I{sub M}), as a measure of how close a HOM is to the nearest beam mode. Depending on the value of I{sub M}, the operating scenarios are classified as safe and unsafe.

  2. Line-driven winds revisited in the context of Be stars: ?-slow solutions with high k values

    SciTech Connect

    Silaj, J.; Jones, C. E.; Cur, M.

    2014-11-01

    The standard, or fast, solutions of m-CAK line-driven wind theory cannot account for slowly outflowing disks like the ones that surround Be stars. It has been previously shown that there exists another family of solutionsthe ?-slow solutionsthat is characterized by much slower terminal velocities and higher mass-loss rates. We have solved the one-dimensional m-CAK hydrodynamical equation of rotating radiation-driven winds for this latter solution, starting from standard values of the line force parameters (?, k, and ?), and then systematically varying the values of ? and k. Terminal velocities and mass-loss rates that are in good agreement with those found in Be stars are obtained from the solutions with lower ? and higher k values. Furthermore, the equatorial densities of such solutions are comparable to those that are typically assumed in ad hoc models. For very high values of k, we find that the wind solutions exhibit a new kind of behavior.

  3. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated

  4. Tennessee Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Tennessee Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,950 5,022 4,686 3,464 2,707 2,100 1,900 1990's 2,067 1,856 1,770 1,660 1,990 1,820 1,690 1,510 1,420 1,230 2000's 1,150 2,000 2,050 1,803 2,100 2,200 2,663 3,942 4,700 5,478 2010's 5,144 - = No Data Reported; --

  5. Texas Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Texas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 6,227,995 6,630,246 6,367,936 6,465,964 6,414,021 6,386,544 6,276,968 1990's 6,476,032 6,066,256 5,893,069 5,769,437 5,834,671 5,592,323 4,684,140 4,716,304 4,777,945 5,719,128 2000's 5,869,901 5,159,233 5,166,315

  6. Pennsylvania Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Pennsylvania Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 118,372 166,342 150,234 159,889 163,318 167,089 191,774 1990's 177,609 152,500 138,675 189,443 187,113 177,139 0 0 0 0 2000's 0 0 0 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA =

  7. Louisiana Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Louisiana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,149,192 3,650,412 3,179,306 2,986,468 3,243,795 3,158,903 3,066,789 1990's 3,780,551 3,355,867 3,404,963 3,454,646 3,562,360 3,709,015 3,976,305 5,398,216 5,410,523 5,265,670 2000's 3,587,815 1,529,733 1,365,925

  8. Michigan Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Michigan Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 138,910 144,537 131,855 127,287 146,996 146,145 155,988 1990's 106,193 189,497 190,637 199,746 216,268 238,203 245,740 305,950 278,076 277,364 2000's 296,556 275,036 274,476 236,987 259,681 261,112 NA NA 153,130

  9. Mississippi Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Mississippi Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,116 206,871 178,426 197,217 195,299 196,912 148,167 1990's 149,012 126,637 129,340 131,450 105,646 95,349 88,805 98,075 88,723 83,232 2000's 70,965 76,986 112,979 133,901 145,692 52,923 60,531 73,460 96,641

  10. Montana Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Montana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 47,751 47,534 46,113 42,203 42,814 47,748 52,044 1990's 45,998 48,075 50,359 58,810 51,953 46,739 46,868 50,409 51,967 55,780 2000's 67,294 78,493 86,075 86,027 90,771 101,666 106,843 110,942 802,619 293,941 2010's

  11. Nebraska Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Nebraska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 2,091 2,300 1,944 1,403 1,261 910 878 1990's 793 785 1,177 1,375 2,098 1,538 1,332 1,194 1,285 1,049 2000's 879 883 892 1,168 1,172 1,172 NA 1,555 3,082 2,908 2010's 2,231 - = No Data Reported; -- = Not Applicable;

  12. Ohio Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Ohio Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 149,096 184,651 180,458 180,287 164,960 166,690 159,730 1990's 154,619 146,189 143,381 135,939 130,855 125,085 119,251 116,246 108,542 102,505 2000's 98,551 97,272 103,158 120,081 119,847 83,523 86,315 88,095 84,858

  13. Oklahoma Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oklahoma Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,730,061 1,985,869 1,936,341 1,917,493 2,004,797 2,106,632 2,185,204 1990's 2,186,153 2,119,161 1,937,224 2,005,971 1,879,257 1,765,788 1,751,487 1,452,233 1,644,531 1,577,961 2000's 1,612,890 1,477,058 1,456,375

  14. Oregon Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oregon Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3 2,790 4,080 4,600 3,800 4,000 2,500 1990's 2,815 2,741 2,580 4,003 3,221 1,923 1,439 1,173 1,067 1,291 2000's 1,214 1,069 837 688 467 433 NA 390 751 751 2010's 1,376 - = No Data Reported; -- = Not Applicable; NA =

  15. Recommended values of clean metal surface work functions

    SciTech Connect

    Derry, Gregory N. Kern, Megan E.; Worth, Eli H.

    2015-11-15

    A critical review of the experimental literature for measurements of the work functions of clean metal surfaces of single-crystals is presented. The tables presented include all results found for low-index crystal faces except cases that were known to be contaminated surfaces. These results are used to construct a recommended value of the work function for each surface examined, along with an uncertainty estimate for that value. The uncertainties are based in part on the error distribution for all measured work functions in the literature, which is included here. The metals included in this review are silver (Ag), aluminum (Al), gold (Au), copper (Cu), iron (Fe), iridium (Ir), molybdenum (Mo), niobium (Nb), nickel (Ni), palladium (Pd), platinum (Pt), rhodium (Rh), ruthenium (Ru), tantalum (Ta), and tungsten (W)

  16. Alaska Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,569 211,579 222,637 304,841 271,120 228,284 192,760 1990's 191,798 200,557 206,259 224,786 201,891 227,797 193,278 191,017 192,982 186,727 2000's 189,896 197,735 200,871 199,616 413,667 502,887 494,323

  17. Arkansas Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arkansas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 78,097 75,575 86,552 68,206 42,688 102,046 42,226 1990's 99,456 83,864 85,177 122,596 24,326 180,117 76,671 71,449 61,012 54,382 2000's 55,057 16,901 161,871 166,329 183,299 190,533 193,491 269,886 446,551 680,613

  18. California Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) California Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 282,639 343,079 361,739 329,366 346,720 327,399 283,509 1990's 275,738 211,841 195,515 76,381 199,649 263 37,823 219,216 264,810 382,715 2000's 323,864 328,778 309,399 293,691 276,520 274,817 278,933 268,016

  19. Station-based Surface Data Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    51 Station-based Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately

  20. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  1. Louisiana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,140,525 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 9,345,006 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 2,210,099 3,029,206 2,955,437 2,360,202 1,960,813 1,776,800

  2. Arkansas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    936,600 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 3,556,609 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.84 1967-2010 Marketed Production (Million Cubic Ft.) 926,639 1,072,212 1,146,168 1,139,654 1,122,733 1,010,274

  3. Recovery of aluminum and other metal values from fly ash

    DOEpatents

    McDowell, William J.; Seeley, Forest G.

    1981-01-01

    The invention described herein relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  4. Recovery of aluminum and other metal values from fly ash

    DOEpatents

    McDowell, W.J.; Seeley, F.G.

    1979-11-01

    The invention relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  5. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect

    Sivaraman, Chitra

    2013-07-31

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  6. Wyoming Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,318,486 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 9,913,756 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.30 1967-2010 Marketed Production (Million Cubic Ft.) 2,305,525 2,159,422 2,022,275 1,858,207 1,794,413 1,793,716

  7. New Mexico Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,287,399 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,878,560 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 5.32 1967-2010 Marketed Production (Million Cubic Ft.) 1,292,185 1,237,303 1,215,773 1,171,640 1,229,519 1,244,811

  8. Oklahoma Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,408,061 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 8,606,898 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.71 1967-2010 Marketed Production (Million Cubic Ft.) 1,827,328 1,888,870 2,023,461 1,993,754 2,331,086 2,499,599

  9. Texas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    7,470,752 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 31,535,019 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.70 1967-2010 Marketed Production (Million Cubic Ft.) 6,715,294 7,112,863 7,475,495 7,633,618 7,985,019 7,880,530

  10. COLLOQUIUM: History, Applications, Numerical Values and Problems with the

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Calculation of EROI - Energy Return on (Energy) Investment | Princeton Plasma Physics Lab March 2, 2016, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: History, Applications, Numerical Values and Problems with the Calculation of EROI - Energy Return on (Energy) Investment Professor Charles Hall State University of NY College of Environmental Science and Forestry Plants and animals are subjected to fierce selective pressure to do the "right thing" energetically, that is to

  11. Colorado Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,548,576 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,250,380 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.96 1967-2010 Marketed Production (Million Cubic Ft.) 1,578,379 1,637,576 1,709,376 1,604,860 1,643,487 1,704,836

  12. U.S. Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1980-2006 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1989-2006 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.48 3.95 2.66 NA NA NA 1922-2015 Marketed Production (Million Cubic Ft.) 22,381,873 24,036,352 25,283,278 25,562,232 27,497,754 28,752,935 1900

  13. Grid-Interactive Renewable Water Heating Economic and Environmental Value

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Grid-Interactive Renewable Water Heating Economic and Environmental Value Grid-interactive renewable water heaters have smart controls that quickly change their charge rate and charge level, factoring in renewable generation and other critical needs of the grid; thereby significantly reducing carbon emissions and bringing a new dimension of conservation and efficiency to the electric grid. The Steffes grid-interactive renewable water heater controller provides utilities with an affordable and

  14. PROCESS OF ELIMINATING HYDROGEN PEROXIDE IN SOLUTIONS CONTAINING PLUTONIUM VALUES

    DOEpatents

    Barrick, J.G.; Fries, B.A.

    1960-09-27

    A procedure is given for peroxide precipitation processes for separating and recovering plutonium values contained in an aqueous solution. When plutonium peroxide is precipitated from an aqueous solution, the supernatant contains appreciable quantities of plutonium and peroxide. It is desirable to process this solution further to recover plutonium contained therein, but the presence of the peroxide introduces difficulties; residual hydrogen peroxide contained in the supernatant solution is eliminated by adding a nitrite or a sulfite to this solution.

  15. Challenges in determining b value in the Northwest Geysers

    SciTech Connect

    Saltiel, S.; Boyle, K.; Majer, E.

    2011-02-01

    Past analyses of the Gutenberg-Richter b-value in the Geysers and other geothermal settings have revealed a deviation from the assumed linear relationship in log space between magnitude and the number of earthquakes. In this study of the Northwest Geysers, we found a gently-sloping discontinuity in the b-value curve. This is especially apparent when comparing the least-squares fit (LSQ) of the curve to the fit obtained by the maximum likelihood estimation (MLE), a widely-respected method of analyzing magnitude-frequency relationships. This study will describe the assumptions made when using each of these two methods and will also explore how they can be used in conjunction to investigate the characteristics of the observed b-value curve. To understand whether slope-fit differences in the LSQR and MLE methods is due to physical properties of the system or due to artifacts from errors in sampling, it is extremely important to consider the catalog completeness, magnitude bin size, number of events, and differences in source mechanisms for the events comprising the study volume. This work will hopefully lead to informative interpretations of frequency-magnitude curves for the Northwest Geysers, a geothermal area of ongoing high-volume coldwater injection and steam production. Through this statistical investigation of the catalog contents, we hope to better understand the dominant source mechanisms and the role of injected fluids in the creation of seismic clustering around nearly 60 wells of varying depths and injection volumes.

  16. Automatic Pole and Q-Value Extraction for RF Structures

    SciTech Connect

    C. Potratz, H.-W. Glock, U. van Rienen, F. Marhauser

    2011-09-01

    The experimental characterization of RF structures like accelerating cavities often demands for measuring resonant frequencies of Eigenmodes and corresponding (loaded) Q-values over a wide spectral range. A common procedure to determine the Q-values is the -3dB method, which works well for isolated poles, but may not be applicable directly in case of multiple poles residing in close proximity (e.g. for adjacent transverse modes differing by polarization). Although alternative methods may be used in such cases, this often comes at the expense of inherent systematic errors. We have developed an automation algorithm, which not only speeds up the measurement time significantly, but is also able to extract Eigenfrequencies and Q-values both for well isolated and overlapping poles. At the same time the measurement accuracy may be improved as a major benefit. To utilize this procedure merely complex scattering parameters have to be recorded for the spectral range of interest. In this paper we present the proposed algorithm applied to experimental data recorded for superconducting higher-order-mode damped multi-cell cavities as an application of high importance.

  17. New space value of the solar oblateness obtained with PICARD

    SciTech Connect

    Irbah, Abdanour; Meftah, Mustapha; Hauchecorne, Alain; Bocquier, Maxime; Cisse, E. Momar; Djafer, Djelloul; Corbard, Thierry

    2014-04-20

    The PICARD spacecraft was launched on 2010 June 15 with the scientific objective of studying the geometry of the Sun. It is difficult to measure solar oblateness because images are affected by optical distortion. Rolling the satellite, as done in previous space missions, determines the contribution of the telescope by assuming that the geometry of the Sun is constant during the observations. The optical response of the telescope is considered to be time-invariant during the roll operations. This is not the case for PICARD because an orbital signature is clearly observed in the solar radius computed from its images. We take this effect into account and provide the new space value of solar oblateness from PICARD images recorded in the solar continuum at 535.7 nm on 2011 July 4-5. The equator-pole radius difference is 8.4 ± 0.5 mas, which corresponds to an absolute radius difference of 6.1 km. This coincides with the mean value of all solar oblateness measurements obtained during the last two decades from the ground, balloons, and space. It is also consistent with values determined from models using helioseismology data.

  18. AskIT Service Desk Support Value Model

    SciTech Connect

    Ashcraft, Phillip Lynn; Cummings, Susan M.; Fogle, Blythe G.; Valdez, Christopher D.

    2015-08-07

    The value model discussed herein provides an accurate and simple calculation of the funding required to adequately staff the AskIT Service Desk (SD).  The model is incremental – only technical labor cost is considered.  All other costs, such as management, equipment, buildings, HVAC, and training are considered common elements of providing any labor related IT Service. Depending on the amount of productivity loss and the number of hours the defect was unresolved, the value of resolving work from the SD is unquestionably an economic winner; the average cost of $16 per SD resolution can commonly translate to cost avoidance exceeding well over $100. Attempting to extract too much from the SD will likely create a significant downside. The analysis used to develop the value model indicates that the utilization of the SD is very high (approximately 90%).  As a benchmark, consider a comment from a manager at Vitalyst (a commercial IT service desk) that their utilization target is approximately 60%.  While high SD utilization is impressive, over the long term it is likely to cause unwanted consequences to staff such as higher turnover, illness, or burnout.  A better solution is to staff the SD so that analysts have time to improve skills through training, develop knowledge, improve processes, collaborate with peers, and improve customer relationship skills.

  19. Technical Note: Relation between dual-energy subtraction of CT images for electron density calibration and virtual monochromatic imaging

    SciTech Connect

    Saito, Masatoshi

    2015-07-15

    Purpose: For accurate tissue inhomogeneity correction in radiotherapy treatment planning, the author previously proposed a simple conversion of the energy-subtracted computed tomography (CT) number to an electron density (ΔHU–ρ{sub e} conversion), which provides a single linear relationship between ΔHU and ρ{sub e} over a wide ρ{sub e} range. The purpose of the present study was to reveal the relation between the ΔHU image for ρ{sub e} calibration and a virtually monochromatic CT image by performing numerical analyses based on the basis material decomposition in dual-energy CT. Methods: The author determined the weighting factor, α{sub 0}, of the ΔHU–ρ{sub e} conversion through numerical analyses of the International Commission on Radiation Units and Measurements Report-46 human body tissues using their attenuation coefficients and given ρ{sub e} values. Another weighting factor, α(E), for synthesizing a virtual monochromatic CT image from high- and low-kV CT images, was also calculated in the energy range of 0.03 < E < 5 MeV, assuming that cortical bone and water were the basis materials. The mass attenuation coefficients for these materials were obtained using the XCOM photon cross sections database. The effective x-ray energies used to calculate the attenuation were chosen to imitate a dual-source CT scanner operated at 80–140 and 100–140 kV/Sn. Results: The determined α{sub 0} values were 0.455 for 80–140 kV/Sn and 0.743 for 100–140 kV/Sn. These values coincided almost perfectly with the respective maximal points of the calculated α(E) curves located at approximately 1 MeV, in which the photon-matter interaction in human body tissues is exclusively the incoherent (Compton) scattering. Conclusions: The ΔHU image could be regarded substantially as a CT image acquired with monoenergetic 1-MeV photons, which provides a linear relationship between CT numbers and electron densities.

  20. Appraising the value of independent EIA follow-up verifiers

    SciTech Connect

    Wessels, Jan-Albert

    2015-01-15

    Independent Environmental Impact Assessment (EIA) follow-up verifiers such as monitoring agencies, checkers, supervisors and control officers are active on various construction sites across the world. There are, however, differing views on the value that these verifiers add and very limited learning in EIA has been drawn from independent verifiers. This paper aims to appraise how and to what extent independent EIA follow-up verifiers add value in major construction projects in the developing country context of South Africa. A framework for appraising the role of independent verifiers was established and four South African case studies were examined through a mixture of site visits, project document analysis, and interviews. Appraisal results were documented in the performance areas of: planning, doing, checking, acting, public participating and integration with other programs. The results indicate that independent verifiers add most value to major construction projects when involved with screening EIA requirements of new projects, allocation of financial and human resources, checking legal compliance, influencing implementation, reporting conformance results, community and stakeholder engagement, integration with self-responsibility programs such as environmental management systems (EMS), and controlling records. It was apparent that verifiers could be more creatively utilized in pre-construction preparation, providing feedback of knowledge into assessment of new projects, giving input to the planning and design phase of projects, and performance evaluation. The study confirms the benefits of proponent and regulator follow-up, specifically in having independent verifiers that disclose information, facilitate discussion among stakeholders, are adaptable and proactive, aid in the integration of EIA with other programs, and instill trust in EIA enforcement by conformance evaluation. Overall, the study provides insight on how to harness the learning opportunities

  1. Note: Radiochemical measurement of fuel and ablator areal densities in cryogenic implosions at the National Ignition Facility

    SciTech Connect

    Hagmann, C. Shaughnessy, D. A.; Moody, K. J.; Grant, P. M.; Gharibyan, N.; Gostic, J. M.; Wooddy, P. T.; Torretto, P. C.; Bandong, B. B.; Bionta, R.; Cerjan, C. J.; Bernstein, L. A.; Caggiano, J. A.; Sayre, D. B.; Schneider, D. H.; Henry, E. A.; Fortner, R. J.; Herrmann, H. W.; Knauer, J. P.

    2015-07-15

    A new radiochemical method for determining deuterium-tritium (DT) fuel and plastic ablator (CH) areal densities (ρR) in high-convergence, cryogenic inertial confinement fusion implosions at the National Ignition Facility is described. It is based on measuring the {sup 198}Au/{sup 196}Au activation ratio using the collected post-shot debris of the Au hohlraum. The Au ratio combined with the independently measured neutron down scatter ratio uniquely determines the areal densities ρR(DT) and ρR(CH) during burn in the context of a simple 1-dimensional capsule model. The results show larger than expected ρR(CH) values, hinting at the presence of cold fuel-ablator mix.

  2. Coal recovery from mine wastes of the historic longwall mining district of north-central illinois. Illinois mineral notes

    SciTech Connect

    Khan, L.A.; Berggren, D.J.; Camp, L.R.

    1986-01-01

    Recovery of coal from mine wastes produced by historic longwall mines in northeastern Illinois was studied as part of a project undertaken in 1982 for the Illinois Abandoned Mined Lands Reclamation Council. About 100 of these mines operated in the Wilmington and La Salle Districts of the Illinois Coal Field between about 1870 and 1940; all worked the Colchester (No. 2) Coal Seam, using a manual high-extraction mining method. Large samples of the three major kinds of mine waste - gray mining gob, preparation gob, and preparation slurry - were collected from deposits at nine of the larger mine sites and analyzed to determine their general ranges of sulfur, ash, and heating values. Preparation gob and slurry from six of the sites had significant combustible contents, and were evaluated by a simple procedure in which ash analyses and wet-screening tests were used to determine the washability and yield of combustibles to recovery processes.

  3. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book

    4 2003 U.S. Private Investment into Construction R&D Sector Average Construction R&D (1) 1.2 Building Technology Heavy Construction 2.0 Appliances 2.0 Special Trade Construction 0.2 Lighting 1.2 HVAC 1.5 U.S. Average of All Private R&D (2) 3.2 Fans, Blowers, & Air Cleaning Equipment 1.6 Manufacturing Average 3.1 Lumber and Wood Products 0.3 Service Industry Average 3.3 Commercial Building Operations 2.2 Note(s): Source(s): Percent of Sales Percent of Sales 1) Includes all

  4. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book

    6 FY2003-2005 Green Building R&D, as Share of Federal Budget and by Organization Budget Function National Defense 57.2% | DOE Health 23.1% | EPA Other energy, general science, | NSF natural resources, and environment 8.0% | PIER (1) Space research and technology 6.3% | DOC-NIST Transportation 1.5% | NYSERDA Agriculture 1.5% | HUD Veterans' benefits and services research 0.7% | GSA Green building 0.2% | ASHRAE Other functions (2) 1.6% Total 100% Note(s): Source(s): 3,000 2,400 1) PIER =

  5. Note: Cold spectra of the electronic transition A{sup 2}Σ{sup +}-X{sup 2}Π of N{sub 2}O{sup +} radical: High resolution analysis of the bands 000-100, 100-100, and 001-101

    SciTech Connect

    Lessa, L. L.; Martins, A. S.; Fellows, C. E.

    2015-10-28

    In this note, three vibrational bands of the electronic transition A{sup 2}Σ{sup +}-X{sup 2}Π of the N{sub 2}O{sup +} radical (000-100, 100-100, and 001-101) were theoretically analysed. Starting from Hamiltonian models proposed for this kind of molecule, their parameters were calculated using a Levenberg-Marquardt fit procedure in order to reduce the root mean square deviation from the experimental transitions below to 0.01 cm{sup −1}. The main objective of this work is to obtain new and reliable values for rotational constant B″ and the spin-orbit interaction parameter A of the analysed vibrational levels of the X{sup 2}Π electronic state of this molecule.

  6. Workshop Notes from "Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles" Workshop, December 10-11, 2009

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U. S. Department of Energy and U.S. Department of Transportation Workshop Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles Workshop Notes December 10-11, 2009 The U.S. Department of Energy (DOE) and the U.S. Department of Transportation (DOT) hosted a workshop to exchange information among experts from China, India, and the U.S. on compressed natural gas (CNG) and hydrogen (H 2 ) fuels for vehicles and to share lessons learned from deployment of

  7. Summary Notes from 1 November 2007 Generic Technical Issue Discussion on Removal of Highly Radioactive Radionuclides/Key Radionuclides to the Maximum Extent Practical

    Office of Environmental Management (EM)

    Max Total Units *If All Splits, No Rack Units **If Only FW, AC Splits 1000 52 28 28 2000 87 59 35 3000 61 33 15 4000 61 33 15 Totals 261 153 93 ***Costs $1,957,500.00 $1,147,500.00 $697,500.00 Notes: added several refrigerants removed bins from analysis removed R-22 from list 1000lb, no Glycol, CO2 or ammonia Seawater R-404A only * includes seawater units ** no seawater units included *** Costs = (total units) X (estimate of $7500 per unit) 1000lb, air cooled split systems, fresh water Refrig

  8. Table 10.6 Solar Thermal Collector Shipments by Type, Price, and Trade, 1974-2009 (Thousand Square Feet, Except as Noted)

    Energy Information Administration (EIA) (indexed site)

    Solar Thermal Collector Shipments by Type, Price, and Trade, 1974-2009 (Thousand Square Feet, Except as Noted) Year Low-Temperature Collectors 1 Medium-Temperature Collectors 2 High-Temperature Collectors 3 Total Shipments Trade Number of U.S. Manu- facturers Quantity Shipped Shipments per Manu- facturer Price 4 (dollars 5 per square foot) Number of U.S. Manu- facturers Quantity Shipped Shipments per Manu- facturer Price 4 (dollars 5 per square foot) Quantity Shipped Price 4 (dollars 5 per

  9. Table 8.12b Electric Noncoincident Peak Load and Capacity Margin: Winter Peak Period, 1986-2011 (Megawatts, Except as Noted)

    Energy Information Administration (EIA) (indexed site)

    b Electric Noncoincident Peak Load and Capacity Margin: Winter Peak Period, 1986-2011 (Megawatts, Except as Noted) Year Noncoincident Peak Load 1 by North American Electric Reliability Corporation (NERC) 2 Regional Assessment Area Capacity Margin 21 (percent) Eastern Interconnection ERCOT 4 Western Inter- connection All Inter- connections FRCC 5 NPCC 6 Balance of Eastern Region 3 ECAR 7,8 MAAC 8,9 MAIN 8,10 MAPP 11 MISO 12 MRO 13 PJM 14 RFC 8,15 SERC 16 SPP 17 Subtotal TRE 18 WECC 19 Total 20

  10. Defining and Computing a Valued Based Cyber-Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2012-01-01

    In earlier work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  11. Defining and Computing a Value Based Cyber-Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In past work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities\\; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper we discuss the specification and design of a system that collects, updates and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  12. RECOVERY OF URANIUM VALUES FROM URANIUM BEARING RAW MATERIALS

    DOEpatents

    Michal, E.J.; Porter, R.R.

    1959-06-16

    Uranium leaching from ground uranium-bearing raw materials using MnO/sub 2/ in H/sub 2/SO/sub 4/ is described. The MnO/sub 2/ oxidizes U to the leachable hexavalent state. The MnO/sub 2/ does not replace Fe normally added, because the Fe complexes P and catalyzes the MnO/sub 2/ reaction. Three examples of continuous processes are given, but batch operation is also possible. The use of MnO/sub 2/ makes possible recovery of very low U values. (T.R.H.)

  13. Reliability of initial-value MHD calculations of tokamak disruptions

    SciTech Connect

    Hicks, H.R.; Carreras, B.A.; Garcia, L.; Holmes, J.A.

    1984-06-01

    We have proposed the nonlinear coupling of resistive tearing modes as the mechanism for some tokamak disruptions. This is based primarily on initial-value resistive magnetohydrodynamic calculations performed with a finite-difference grid in minor radius and Fourier series expansion in the poloidal and toroidal angles. The calculations show that, for certain q profiles, the nonlinear interaction of tearing modes of different helicities leads to the rapid destabilization of other modes. The resulting effects and the time scale are consistent with the tokamak disruption.

  14. Decommissioning Cost Estimating Factors And Earned Value Integration

    SciTech Connect

    Sanford, P.C.; Cimmarron, E.

    2008-07-01

    The Rocky Flats 771 Project progressed from the planning stage of decommissioning a plutonium facility, through the strip-out of highly-contaminated equipment, removal of utilities and structural decontamination, and building demolition. Actual cost data was collected from the strip-out activities and compared to original estimates, allowing the development of cost by equipment groupings and types and over time. Separate data was developed from the project control earned value reporting and compared with the equipment data. The paper discusses the analysis to develop the detailed factors for the different equipment types, and the items that need to be considered during characterization of a similar facility when preparing an estimate. The factors are presented based on direct labor requirements by equipment type. The paper also includes actual support costs, and examples of fixed or one-time start-up costs. The integration of the estimate and the earned value system used for the 771 Project is also discussed. The paper covers the development of the earned value system as well as its application to a facility to be decommissioned and an existing work breakdown structure. Lessons learned are provided, including integration with scheduling and craft supervision, measurement approaches, and verification of scope completion. In summary: The work of decommissioning the Rocky Flats 771 Project process equipment was completed in 2003. Early in the planning process, we had difficulty in identifying credible data and implementing processes for estimating and controlling this work. As the project progressed, we were able to collect actual data on the costs of removing plutonium contaminated equipment from various areas over the life of this work and associate those costs with individual pieces of equipment. We also were able to develop and test out a system for measuring the earned value of a decommissioning project based on an evolving estimate. These were elements that

  15. Optimum value of original events on the PEPT technique

    SciTech Connect

    Sadremomtaz, Alireza; Taherparvar, Payvand

    2011-12-26

    Do Positron emission particle tracking (PEPT) has been used to track the motion of a single radioactively labeled tracer particle within a bed of similar particles. In this paper, the effect of the original event fraction on the results precise in two experiments has been reviewed. Results showed that the algorithm can no longer distinguish some corrupt trajectories, in addition to; further iteration reduces the statistical significance of the sample without improving its quality. Results show that the optimum value of trajectories depends on the type of experiment.

  16. Valuing the Environmental Benefits of Urban WaterConservation

    SciTech Connect

    Coughlin, Katie M.; Bolduc, Chris A.; Chan, Peter T.; Dunham-Whitehead, C.; Van Buskirk, R.D.

    2007-05-01

    This report documents a project undertaken for theCalifornia Urban Water Conservation Council (the Council) to create a newmethod of accounting for the diverse environmental benefits of raw watersavings. The environmental benefits (EB) model was designed to providewater utilities with a practical tool that they can use to assign amonetary value to the benefits that may accrue from implementing any ofthe Council-recommended Best Management Practices. The model treats onlyenvironmental services associated directly with water, and is intended tocover miscellaneous impacts that are not currently accounted for in anyother cost-benefit analysis.

  17. Resolving the sign ambiguity in the singular value decomposition.

    SciTech Connect

    Bro, Rasmus; Acar, Evrim; Kolda, Tamara Gibson

    2007-10-01

    Many modern data analysis methods involve computing a matrix singular value decomposition (SVD) or eigenvalue decomposition (EVD). Principal components analysis is the time-honored example, but more recent applications include latent semantic indexing, hypertext induced topic selection (HITS), clustering, classification, etc. Though the SVD and EVD are well-established and can be computed via state-of-the-art algorithms, it is not commonly mentioned that there is an intrinsic sign indeterminacy that can significantly impact the conclusions and interpretations drawn from their results. Here we provide a solution to the sign ambiguity problem and show how it leads to more sensible solutions.

  18. Method of absorbance correction in a spectroscopic heating value sensor

    DOEpatents

    Saveliev, Alexei; Jangale, Vilas Vyankatrao; Zelepouga, Sergeui; Pratapas, John

    2013-09-17

    A method and apparatus for absorbance correction in a spectroscopic heating value sensor in which a reference light intensity measurement is made on a non-absorbing reference fluid, a light intensity measurement is made on a sample fluid, and a measured light absorbance of the sample fluid is determined. A corrective light intensity measurement at a non-absorbing wavelength of the sample fluid is made on the sample fluid from which an absorbance correction factor is determined. The absorbance correction factor is then applied to the measured light absorbance of the sample fluid to arrive at a true or accurate absorbance for the sample fluid.

  19. The use of probability techniques in value-based planning

    SciTech Connect

    Rau, N.S. (National Renewable Energy Lab., Golden, CO (United States))

    1994-11-01

    Present techniques used in value-based planning do not properly represent neither the durations of capacity outage nor the effects of outage on post-interruption demand. Generation outage models do not relate the expected quantum of shortages to particular durations of outage. A model is proposed to compute this expectation by using the generator outage statistics in its entirety. The application of this model to the IEEE test system gave different results, depending on which outage cost data were used. Consequently, there is a need for a uniform procedure to report outage costs. A bottom-up procedure based on end use is proposed as a possibility.

  20. Conformal coating value/risk assessment for Sandia satellite programs.

    SciTech Connect

    Russick, Edward Mark; Thayer, Gayle Echo

    2008-03-01

    Conformal coatings are used in space applications on printed circuit board (PCB) assemblies primarily as a protective barrier against environmental contaminants. Such coatings have been used at Sandia for decades in satellite applications including the GPS satellite program. Recently, the value of conformal coating has been questioned because it is time consuming (requiring a 5-6 week schedule allowance) and delays due to difficulty of repairs and rework performed afterward are troublesome. In an effort to find opportunities where assembly time can be reduced, a review of the literature as well as discussions with satellite engineers both within and external to Sandia regarding the value of conformal coating was performed. Several sources on the value of conformal coating, the functions it performs, and on whether coatings are necessary and should be used at all were found, though nearly all were based on anecdotal information. The first section of this report, titled 'Conformal Coating for Space Applications', summarizes the results of an initial risk-value assessment of the conformal coating process for Sandia satellite programs based on information gathered. In the process of collecting information to perform the assessment, it was necessary to obtain a comprehensive understanding of the entire satellite box assembly process. A production time-line was constructed and is presented in the second section of this report, titled 'Satellite Box Assembly', specifically to identify potential sources of time delays, manufacturing issues, and component failures related to the conformal coating process in relation to the box assembly. The time-line also allows for identification of production issues that were anecdotally attributed to the conformal coating but actually were associated with other production steps in the box assembly process. It was constructed largely in consultation with GPS program engineers with empirical knowledge of times required to complete the

  1. Vocational Rehabilitation -Value Added: Explaining What We Do,

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Vocational Rehabilitation -Value Added: Explaining What We Do, Craig Bock, MA, CRC Washington State IARP Quarterly Newsletter - June 2009 If you have an injury at work, do you know what happens next or how you would navigate the Workers' Compensation system should you need to? What does RCW 51.32.095 (state law) and WAC 296-19A-070 (administrative rules) mean to you? If you could not return to your job and had permanent physical or cognitive restrictions who would help you explore your return to

  2. Signal evaluations using singular value decomposition for Thomson scattering diagnostics

    SciTech Connect

    Tojo, H., E-mail: tojo.hiroshi@jaea.go.jp; Yatsuka, E.; Hatae, T.; Itami, K. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka 311-0193 (Japan); Yamada, I.; Yasuhara, R.; Funaba, H.; Hayashi, H. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki 509-5292 (Japan)

    2014-11-15

    This paper provides a novel method for evaluating signal intensities in incoherent Thomson scattering diagnostics. A double-pass Thomson scattering system, where a laser passes through the plasma twice, generates two scattering pulses from the plasma. Evaluations of the signal intensities in the spectrometer are sometimes difficult due to noise and stray light. We apply the singular value decomposition method to Thomson scattering data with strong noise components. Results show that the average accuracy of the measured electron temperature (T{sub e}) is superior to that of temperature obtained using a low-pass filter (<20 MHz) or without any filters.

  3. Semiclassical initial value representation for the quantum propagator in the Heisenberg interaction representation

    SciTech Connect

    Petersen, Jakob; Pollak, Eli

    2015-12-14

    One of the challenges facing on-the-fly ab initio semiclassical time evolution is the large expense needed to converge the computation. In this paper, we suggest that a significant saving in computational effort may be achieved by employing a semiclassical initial value representation (SCIVR) of the quantum propagator based on the Heisenberg interaction representation. We formulate and test numerically a modification and simplification of the previous semiclassical interaction representation of Shao and Makri [J. Chem. Phys. 113, 3681 (2000)]. The formulation is based on the wavefunction form of the semiclassical propagation instead of the operator form, and so is simpler and cheaper to implement. The semiclassical interaction representation has the advantage that the phase and prefactor vary relatively slowly as compared to the “standard” SCIVR methods. This improves its convergence properties significantly. Using a one-dimensional model system, the approximation is compared with Herman-Kluk’s frozen Gaussian and Heller’s thawed Gaussian approximations. The convergence properties of the interaction representation approach are shown to be favorable and indicate that the interaction representation is a viable way of incorporating on-the-fly force field information within a semiclassical framework.

  4. Technical Note: Measuring contrast- and noise-dependent spatial resolution of an iterative reconstruction method in CT using ensemble averaging

    SciTech Connect

    Yu, Lifeng Vrieze, Thomas J.; Leng, Shuai; Fletcher, Joel G.; McCollough, Cynthia H.

    2015-05-15

    Purpose: The spatial resolution of iterative reconstruction (IR) in computed tomography (CT) is contrast- and noise-dependent because of the nonlinear regularization. Due to the severe noise contamination, it is challenging to perform precise spatial-resolution measurements at very low-contrast levels. The purpose of this study was to measure the spatial resolution of a commercially available IR method using ensemble-averaged images acquired from repeated scans. Methods: A low-contrast phantom containing three rods (7, 14, and 21 HU below background) was scanned on a 128-slice CT scanner at three dose levels (CTDI{sub vol} = 16, 8, and 4 mGy). Images were reconstructed using two filtered-backprojection (FBP) kernels (B40 and B20) and a commercial IR method (sinogram affirmed iterative reconstruction, SAFIRE, Siemens Healthcare) with two strength settings (I40-3 and I40-5). The same scan was repeated 100 times at each dose level. The modulation transfer function (MTF) was calculated based on the edge profile measured on the ensemble-averaged images. Results: The spatial resolution of the two FBP kernels, B40 and B20, remained relatively constant across contrast and dose levels. However, the spatial resolution of the two IR kernels degraded relative to FBP as contrast or dose level decreased. For a given dose level at 16 mGy, the MTF{sub 50%} value normalized to the B40 kernel decreased from 98.4% at 21 HU to 88.5% at 7 HU for I40-3 and from 97.6% to 82.1% for I40-5. At 21 HU, the relative MTF{sub 50%} value decreased from 98.4% at 16 mGy to 90.7% at 4 mGy for I40-3 and from 97.6% to 85.6% for I40-5. Conclusions: A simple technique using ensemble averaging from repeated CT scans can be used to measure the spatial resolution of IR techniques in CT at very low contrast levels. The evaluated IR method degraded the spatial resolution at low contrast and high noise levels.

  5. Fuel Tables.indd

    Annual Energy Outlook

    ... Where shown, (s) Btu value less than 0.05. Notes: Motor gasoline estimates include fuel ethanol blended into motor gasoline. * Totals may not equal sum of components due to ...

  6. Moisture Management for High R-Value Walls

    SciTech Connect

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    The following report explains the moisture-related concerns for High R-value wall assemblies and discusses past Building America research work that informs this study. Hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones (2, 3, 4C, 4, 5A, and 7, respectively). The simulations are informed by experience gained from past research in this area and validated by field measurement and forensic experience. The modeling program was developed to assess the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage. The peak annual moisture content of the wood based exterior sheathing was used to comparatively analyze the response to the moisture loads for each of the walls in each given city. Walls which experienced sheathing moisture contents between 20% and 28% were identified as risky, whereas those exceeding 28% were identified as very high risk. All of the wall assemblies perform well under idealized conditions. However, only the walls with exterior insulation, or cavity insulation which provides a hygrothermal function similar to exterior insulation, perform adequately when exposed to moisture loads. Walls with only cavity insulation are particularly susceptible to air leakage condensation. None of the walls performed well when a precipitation based bulk water leak was introduced to the backside of the sheathing, emphasizing the importance of proper flashing details.

  7. 2D Gridded Surface Data Value-Added Product

    SciTech Connect

    Tang, Q; Xie, S

    2015-08-30

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) 2-dimensional (2D) gridded surface data (ARMBE2DGRID) value-added product. Spatial variability is critically important to many scientific studies, especially those that involve processes of great spatial variations at high temporal frequency (e.g., precipitation, clouds, radiation, etc.). High-density ARM sites deployed at the Southern Great Plains (SGP) allow us to observe the spatial patterns of variables of scientific interests. The upcoming megasite at SGP with its enhanced spatial density will facilitate the studies at even finer scales. Currently, however, data are reported only at individual site locations at different time resolutions for different datastreams. It is difficult for users to locate all the data they need and requires extra effort to synchronize the data. To address these problems, the ARMBE2DGRID value-added product merges key surface measurements at the ARM SGP sites and interpolates the data to a regular 2D grid to facilitate the data application.

  8. Matrix-valued polynomials in Lanczos type methods

    SciTech Connect

    Simoncini, V.; Gallopoulos, E.

    1994-12-31

    It is well known that convergence properties of iterative methods can be derived by studying the behavior of the residual polynomial over a suitable domain of the complex plane. Block Krylov subspace methods for the solution of linear systems A[x{sub 1},{hor_ellipsis}, x{sub s}] = [b{sub 1},{hor_ellipsis}, b{sub s}] lead to the generation of residual polynomials {phi}{sub m} {element_of} {bar P}{sub m,s} where {bar P}{sub m,s} is the subset of matrix-valued polynomials of maximum degree m and size s such that {phi}{sub m}(0) = I{sub s}, R{sub m} := B - AX{sub m} = {phi}{sub m}(A) {circ} R{sub 0}, where {phi}{sub m}(A) {circ} R{sub 0} := R{sub 0} - A{summation}{sub j=0}{sup m-1} A{sup j}R{sub 0}{xi}{sub j}, {xi}{sub j} {element_of} R{sup sxs}. An effective method has to balance adequate approximation with economical computation of iterates defined by the polynomial. Matrix valued polynomials can be used to improve the performance of block methods. Another approach is to solve for a single right-hand side at a time and use the generated information in order to update the approximations of the remaining systems. In light of this, a more general scheme is as follows: A subset of residuals (seeds) is selected and a block short term recurrence method is used to compute approximate solutions for the corresponding systems. At the same time the generated matrix valued polynomial is implicitly applied to the remaining residuals. Subsequently a new set of seeds is selected and the process is continued as above, till convergence of all right-hand sides. The use of a quasi-minimization technique ensures a smooth convergence behavior for all systems. In this talk the authors discuss the implementation of this class of algorithms and formulate strategies for the selection of parameters involved in the computation. Experiments and comparisons with other methods will be presented.

  9. Electrorecycling of Critical and Value Metals from Mobile Electronics

    SciTech Connect

    Lister, Tedd E.; Wang, Peming; Anderko, Andre

    2014-09-01

    Mobile electronic devices such as smart phones and tablets are a significant source of valuable metals that should be recycled. Each year over a billion devices are sold world-wide and the average life is only a couple years. Value metals in phones are gold, palladium, silver, copper, cobalt and nickel. Devices now contain increasing amounts of rare earth elements (REE). In recent years the supply chain for REE has moved almost exclusively to China. They are contained in displays, speakers and vibrators within the devices. By US Department of Energy (DOE) classification, specific REEs (Nd, Dy, Eu, Tb and Y) are considered critical while others (Ce, La and Pr) are deemed near critical. Effective recycling schemes should include the recovery of these critical materials. By including more value materials in a recovery scheme, more value can be obtained by product diversification and less waste metals remains to be disposed of. REEs are mined as a group such that when specific elements become critical significantly more ore must be processed to capture the dilute but valuable critical elements. Targeted recycling of items containing the more of the less available critical materials could address their future criticality. This presentation will describe work in developing aqueous electrochemistry-based schemes for recycling metals from scrap mobile electronics. The electrorecycling process generates oxidizing agents at an anode while reducing dissolved metals at the cathode. E vs pH diagrams and metals dissolution experiments are used to assess effectiveness of various solution chemistries. Although several schemes were envisioned, a two stages process has been the focus of work: 1) initial dissolution of Cu, Sn, Ag and magnet materials using Fe+3 generated in acidic sulfate and 2) final dissolution of Pd and Au using Cl2 generated in an HCl solution. Experiments were performed using simulated metal mixtures. Both Cu and Ag were recovered at ~ 97% using Fe+3 while

  10. Defining and Computing a Valued Based Cyber Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In earlier works (Ben-Aissa et al. 2010; Abercrombie et al. 2008; Sheldon et al. 2009), we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  11. Modeling and Analysis Session: Market, Value, and Policy Analysis (Presentation)

    SciTech Connect

    Margolis, R. M.

    2008-04-01

    The Primary objectives: to provide a broad range of analytical support to the Solar Program; and to anticipate and respond to the rapidly evolving analytical needs of the Solar Program. Three broad types of analysis are being carried out under this project including: (1) Market analysis: Developing a PV market penetration model--the SolarDS model--and other tools, in order to gain insight into the factors influencing market penetration of PV technology in U.S. markets. (2) Value analysis: Providing inputs to, support for, and review of the annual GPRA benefits analysis. Also developing methods and tools for improving the quantification of the benefits and cost of solar technologies. (3) Policy analysis: Defining and carrying out analysis that meets the needs of the Solar Energy Technologies Program in a timely fashion, for example evaluating the potential role of solar in the energy economy in the long-term.

  12. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    SciTech Connect

    Newsom, R. K.; Sivaraman, C.; Shippert, T. R.; Riihimaki, L. D.

    2015-07-01

    Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

  13. Considering value of information when using CFD in design

    SciTech Connect

    Misra, John Satprim

    2009-12-19

    This thesis presents an approach to find lower resolution CFD models that can accurately lead a designer to a correct decision at a lower computational cost. High-fidelity CFD models often contain too much information and come at a higher computational cost, limiting the designs a designer can test and how much optimization can be performed on the design. Lower model resolution is commonly used to reduce computational time. However there are no clear guidelines on how much model accuracy is required. Instead experience and intuition are used to select an appropriate lower resolution model. This thesis presents an alternative to this ad hoc method by considering the added value of the addition information provided by increasing accurate and more computationally expensive models.

  14. Station-based Surface Data Value-Added Product

    SciTech Connect

    Tang, Q.; Xie, S.

    2015-07-01

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) station-based surface data (ARMBESTNS) value-added product. It is a twin data product of the ARMBE 2-Dimensional gridded (ARMBE2DGRID) data set. Unlike the ARMBE2DGRID data set, ARMBESTNS data are reported at the original site locations and show the original information (except for the interpolation over time). Therefore, the users have the flexibility to process the data with the approach more suitable for their applications. This document provides information about the input data, quality control (QC) method, and output format of this data set. As much of the information is identical to that of the ARMBE2DGRID data, this document will emphasize more on the different aspects of these two data sets.

  15. Value of Demand Response: Quantities from Production Cost Modeling (Presentation)

    SciTech Connect

    Hummon, M.

    2014-04-01

    Demand response (DR) resources present a potentially important source of grid flexibility particularly on future systems with high penetrations of variable wind and solar power generation. However, managed loads in grid models are limited by data availability and modeling complexity. This presentation focuses on the value of co-optimized DR resources to provide energy and ancillary services in a production cost model. There are significant variations in the availabilities of different types of DR resources, which affect both the operational savings as well as the revenue for each DR resource. The results presented include the system-wide avoided fuel and generator start-up costs as well as the composite revenue for each DR resource by energy and operating reserves. In addition, the revenue is characterized by the capacity, energy, and units of DR enabled.

  16. Analysis of Solar Census Remote Solar Access Value Calculation Methodology

    SciTech Connect

    Nangle, J.; Dean, J.; Van Geet, O.

    2015-03-01

    The costs of photovoltaic (PV) system hardware (PV panels, inverters, racking, etc.) have fallen dramatically over the past few years. Nonhardware (soft) costs, however, have failed to keep pace with the decrease in hardware costs, and soft costs have become a major driver of U.S. PV system prices. Upfront or 'sunken' customer acquisition costs make up a portion of an installation's soft costs and can be addressed through software solutions that aim to streamline sales and system design aspects of customer acquisition. One of the key soft costs associated with sales and system design is collecting information on solar access for a particular site. Solar access, reported in solar access values (SAVs), is a measurement of the available clear sky over a site and is used to characterize the impacts of local shading objects. Historically, onsite shading studies have been required to characterize the SAV of the proposed array and determine the potential energy production of a photovoltaic system.

  17. Value Engineering Study for Closing Waste Packages Containing TAD Canisters

    SciTech Connect

    Colleen Shelton-Davis

    2005-11-01

    The Office of Civilian Radioactive Waste Management announced their intention to have the commercial utilities package spent nuclear fuel in shielded, transportable, ageable, and disposable containers prior to shipment to the Yucca Mountain repository. This will change the conditions used as a basis for the design of the waste package closure system. The environment is now expected to be a low radiation, low contamination area. A value engineering study was completed to evaluate possible modifications to the existing closure system using the revised requirements. Four alternatives were identified and evaluated against a set of weighted criteria. The alternatives are (1) a radiation-hardened, remote automated system (the current baseline design); (2) a nonradiation-hardened, remote automated system (with personnel intervention if necessary); (3) a nonradiation-hardened, semi-automated system with personnel access for routine manual operations; and (4) a nonradiation-hardened, fully manual system with full-time personnel access. Based on the study, the recommended design is Alternative 2, a nonradiation-hardened, remote automated system. It is less expensive and less complex than the current baseline system, because nonradiation-hardened equipment can be used and some contamination control equipment is no longer needed. In addition, the inclusion of remote automation ensures throughput requirements are met, provides a more reliable process, and provides greater protection for employees from industrial accidents and radiation exposure than the semi-automated or manual systems. Other items addressed during the value engineering study as requested by OCRWM include a comparison to industry canister closure systems and corresponding lessons learned; consideration of closing a transportable, ageable, and disposable canister; and an estimate of the time required to perform a demonstration of the recommended closure system.

  18. Sonde Adjust Value-Added Product Technical Report

    SciTech Connect

    Troyan, D

    2012-01-09

    The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC

  19. Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Docket No. EO-05-01: Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor, March ...

  20. Benefit Value Studies and Benefit Trends 11-3-15 Final.pptx

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | MTG DATE | 2015 Introduction to BIv1 2 Agenda What is a Benefit Value Study? Benefit Value Study ... as well as other work-life programs and perks ...

  1. 48pt0ValueEngineeringinMOContracts.pdf | Department of Energy

    Energy.gov [DOE] (indexed site)

    8pt0ValueEngineeringinMOContracts.pdf More Documents & Publications Chapter 48 - Value Engineering CX-008874: Categorical Exclusion Determination CX-000908: Categorical Exclusion...

  2. Doppler Lidar Wind Value-Added Product (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Wind Value-Added Product Citation Details In-Document Search Title: Doppler Lidar Wind Value-Added Product Wind speed and direction, together with pressure, temperature, and ...

  3. ANION EXCHANGE METHOD FOR SEPARATION OF METAL VALUES

    DOEpatents

    Hyde, E.K.; Raby, B.A.

    1959-02-10

    A method is described for selectively separating radium, bismuth, poloniums and lead values from a metallic mixture of thc same. The mixture is dissolved in aqueous hydrochloric acid and the acidity is adjusted to between 1 to 2M in hydrochloric acid to form the anionic polychloro complexes of polonium and bismuth. The solution is contacted with a first anion exchange resin such as strong base quaternary ammonia type to selectively absorb the polonium and bismuth leaving the radium and lead in the effluent. The effluent, after treatment in hydrochloric acid to increase the hydrochloric acid concentration to 6M is contacted with a second anion exchange iesin of the same type as the above to selectively adsorb the lead leaving the radium in the effluent. Radium is separately recovered from the effluent from the second exchange column. Lead is stripped from the loaded resin of the second column by treatment with 3M hydrochloric acid solution. The loaded resin of the first column is washed with 8M hydrochloric acid solution to recover bismuth and then treated with strong nitric acid solution to recover polonium.

  4. No-Impact Threshold Values for NRAP's Reduced Order Models

    SciTech Connect

    Last, George V.; Murray, Christopher J.; Brown, Christopher F.; Jordan, Preston D.; Sharma, Maneesh

    2013-02-01

    The purpose of this study was to develop methodologies for establishing baseline datasets and statistical protocols for determining statistically significant changes between background concentrations and predicted concentrations that would be used to represent a contamination plume in the Gen II models being developed by NRAP’s Groundwater Protection team. The initial effort examined selected portions of two aquifer systems; the urban shallow-unconfined aquifer system of the Edwards-Trinity Aquifer System (being used to develop the ROM for carbon-rock aquifers, and the a portion of the High Plains Aquifer (an unconsolidated and semi-consolidated sand and gravel aquifer, being used to development the ROM for sandstone aquifers). Threshold values were determined for Cd, Pb, As, pH, and TDS that could be used to identify contamination due to predicted impacts from carbon sequestration storage reservoirs, based on recommendations found in the EPA’s ''Unified Guidance for Statistical Analysis of Groundwater Monitoring Data at RCRA Facilities'' (US Environmental Protection Agency 2009). Results from this effort can be used to inform a ''no change'' scenario with respect to groundwater impacts, rather than the use of an MCL that could be significantly higher than existing concentrations in the aquifer.

  5. M-flation: inflation from matrix valued scalar fields

    SciTech Connect

    Ashoorioon, Amjad; Firouzjahi, Hassan; Sheikh-Jabbari, M.M. E-mail: firouz@physics.mcgill.ca

    2009-06-01

    We propose an inflationary scenario, M-flation, in which inflation is driven by three N N hermitian matrices ?{sub i}, i = 1, 2, 3. The inflation potential of our model, which is strongly motivated from string theory, is constructed from ?{sub i} and their commutators. We show that one can consistently restrict the classical dynamics to a sector in which the ?{sub i} are proportional to the N N irreducible representations of SU(2). In this sector our model effectively behaves as an N-flation model with 3N{sup 2} number of fields and the effective inflaton field has a super-Planckian field value. Furthermore, the fine-tunings associated with unnaturally small couplings in the chaotic type inflationary scenarios are removed. Due to the matrix nature of the inflaton fields there are 3N{sup 2}?1 extra scalar fields in the dynamics. These have the observational effects such as production of iso-curvature perturbations on cosmic microwave background. Moreover, the existence of these extra scalars provides us with a natural preheating mechanism and exit from inflation. As the effective inflaton field can traverse super-Planckian distances in the field space, the model is capable of producing a considerable amount of gravity waves that can be probed by future CMB polarization experiments such as PLANCK, QUIET and CMBPOL.

  6. Hidden values in bauxite residue (red mud): Recovery of metals

    SciTech Connect

    Liu, Yanju; Naidu, Ravi

    2014-12-15

    Highlights: • Current iron recovery techniques using red mud are depicted. • Advantages and disadvantages exist in different recovering processes. • Economic and environmental friendly integrated usage of red mud is promising. - Abstract: Bauxite residue (red mud) is a hazardous waste generated from alumina refining industries. Unless managed properly, red mud poses significant risks to the local environment due to its extreme alkalinity and its potential impacts on surface and ground water quality. The ever-increasing generation of red mud poses significant challenges to the aluminium industries from management perspectives given the low proportion that are currently being utilized beneficially. Red mud, in most cases, contains elevated concentrations of iron in addition to aluminium, titanium, sodium and valuable rare earth elements. Given the scarcity of iron supply globally, the iron content of red mud has attracted increasing research interest. This paper presents a critical overview of the current techniques employed for iron recovery from red mud. Information on the recovery of other valuable metals is also reviewed to provide an insight into the full potential usage of red mud as an economic resource rather than a waste. Traditional hydrometallurgy and pyrometallurgy are being investigated continuously. However, in this review several new techniques are introduced that consider the process of iron recovery from red mud. An integrated process which can achieve multiple additional values from red mud is much preferred over the single process methods. The information provided here should help to improve the future management and utilization of red mud.

  7. Precision absolute-value amplifier for a precision voltmeter

    DOEpatents

    Hearn, W.E.; Rondeau, D.J.

    1982-10-19

    Bipolar inputs are afforded by the plus inputs of first and second differential input amplifiers. A first gain determining resistor is connected between the minus inputs of the differential amplifiers. First and second diodes are connected between the respective minus inputs and the respective outputs of the differential amplifiers. First and second FETs have their gates connected to the outputs of the amplifiers, while their respective source and drain circuits are connected between the respective minus inputs and an output lead extending to a load resistor. The output current through the load resistor is proportional to the absolute value of the input voltage difference between the bipolar input terminals. A third differential amplifier has its plus input terminal connected to the load resistor. A second gain determining resistor is connected between the minus input of the third differential amplifier and a voltage source. A third FET has its gate connected to the output of the third amplifier. The source and drain circuit of the third transistor is connected between the minus input of the third amplifier and a voltage-frequency converter, constituting an output device. A polarity detector is also provided, comprising a pair of transistors having their inputs connected to the outputs of the first and second differential amplifiers. The outputs of the polarity detector are connected to gates which switch the output of the voltage-frequency converter between up and down counting outputs.

  8. Precision absolute value amplifier for a precision voltmeter

    DOEpatents

    Hearn, William E.; Rondeau, Donald J.

    1985-01-01

    Bipolar inputs are afforded by the plus inputs of first and second differential input amplifiers. A first gain determining resister is connected between the minus inputs of the differential amplifiers. First and second diodes are connected between the respective minus inputs and the respective outputs of the differential amplifiers. First and second FETs have their gates connected to the outputs of the amplifiers, while their respective source and drain circuits are connected between the respective minus inputs and an output lead extending to a load resister. The output current through the load resister is proportional to the absolute value of the input voltage difference between the bipolar input terminals. A third differential amplifier has its plus input terminal connected to the load resister. A second gain determining resister is connected between the minus input of the third differential amplifier and a voltage source. A third FET has its gate connected to the output of the third amplifier. The source and drain circuit of the third transistor is connected between the minus input of the third amplifier and a voltage-frequency converter, constituting an output device. A polarity detector is also provided, comprising a pair of transistors having their inputs connected to the outputs of the first and second differential amplifiers. The outputs of the polarity detector are connected to gates which switch the output of the voltage-frequency converter between up and down counting outputs.

  9. Electronically Nonadiabatic Dynamics via Semiclassical Initial Value Methods

    SciTech Connect

    Miller, William H.

    2008-12-11

    In the late 1970's Meyer and Miller (MM) [J. Chem. Phys. 70, 3214 (1979)] presented a classical Hamiltonian corresponding to a finite set of electronic states of a molecular system (i.e., the various potential energy surfaces and their couplings), so that classical trajectory simulations could be carried out treating the nuclear and electronic degrees of freedom (DOF) in an equivalent dynamical framework (i.e., by classical mechanics), thereby describing non-adiabatic dynamics in a more unified manner. Much later Stock and Thoss (ST) [Phys. Rev. Lett. 78, 578 (1997)] showed that the MM model is actually not a 'model', but rather a 'representation' of the nuclear-electronic system; i.e., were the MMST nuclear-electronic Hamiltonian taken as a Hamiltonian operator and used in the Schroedinger equation, the exact (quantum) nuclear-electronic dynamics would be obtained. In recent years various initial value representations (IVRs) of semiclassical (SC) theory have been used with the MMST Hamiltonian to describe electronically non-adiabatic processes. Of special interest is the fact that though the classical trajectories generated by the MMST Hamiltonian (and which are the 'input' for an SC-IVR treatment) are 'Ehrenfest trajectories', when they are used within the SC-IVR framework the nuclear motion emerges from regions of non-adiabaticity on one potential energy surface (PES) or another, and not on an average PES as in the traditional Ehrenfest model. Examples are presented to illustrate and (hopefully) illuminate this behavior.

  10. SEPARATION OF BARIUM VALUES FROM URANYL NITRATE SOLUTIONS

    DOEpatents

    Tompkins, E.R.

    1959-02-24

    The separation of radioactive barium values from a uranyl nitrate solution of neutron-irradiated uranium is described. The 10 to 20% uranyl nitrate solution is passed through a flrst column of a cation exchange resin under conditions favoring the adsorption of barium and certain other cations. The loaded resin is first washed with dilute sulfuric acid to remove a portion of the other cations, and then wash with a citric acid solution at pH of 5 to 7 to recover the barium along with a lesser amount of the other cations. The PH of the resulting eluate is adjusted to about 2.3 to 3.5 and diluted prior to passing through a smaller second column of exchange resin. The loaded resin is first washed with a citric acid solution at a pH of 3 to elute undesired cations and then with citric acid solution at a pH of 6 to eluts the barium, which is substantially free of undesired cations.

  11. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer

    Riihimaki, Laura

    2014-05-15

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  12. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    DOE Data Explorer

    Riihimaki, Laura

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al. (2009) have implemented a method, based on Boers and Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions.

  13. Task 4.9 -- Value-added products from syngas

    SciTech Connect

    Olson, E.S.; Sharma, R.K.

    1997-02-01

    The work on advanced fuel forms in 1996 focused on the synthesis of higher alcohols from mixtures of hydrogen and carbon dioxide (syngas) from coal gasification. The conversion of coal gasification products to commercially valuable alcohols will provide an important new market for current and future gasification plants. Initial work in this project utilized a novel molybdenum sulfide catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. The support for the active metal sulfide is a layered mixed oxide (hydrotalcite) capable of interaction with the metal sites for catalysis of carbon monoxide reductions. These catalysts have a high surface area, are highly porous, and have basic and acidic functionality. A pressurized fixed-bed flow-through reactor was constructed, and the MoS{sub 2} catalysts were tested with syngas under a variety of conditions. Unfortunately, the catalysts, even with higher molybdenum loading and addition of promoters, failed to give alcohol products. A batch reactor test of the catalyst was also conducted, but did not produce alcohol products. Group 8 metals have been used previously in catalysts for syngas reactions. Ruthenium and rhodium catalysts were prepared by impregnation of a hydrotalcite support. Tests with these catalysts in flow-through reactors also did not produce the desired alcohol products. The formation of higher alcohols from smaller ones, such as methanol and ethanol, could be commercially important if high selectivity could be achieved. The methanol and ethanol would be derived from syngas and fermentation, respectively. Based on previous work in other laboratories, it was hypothesized that the hydrotalcite supported MoS{sub 2} or Ru or Rh catalysts could catalyze the formation of butyl alcohols. Although the desired 1-butanol was obtained in batch reactions with the promoted Ru catalyst, the reaction was not as selective as desired. Product suitable for a lower-vapor-pressure gasoline

  14. SOURCE OF BURNUP VALUES FOR COMMERCIAL SPENT NUCLEAR FUEL ASSEMBLIES

    SciTech Connect

    BSC

    2004-12-01

    Waste packages are loaded with commercial spent nuclear fuel (SNF) that satisfies the minimum burnup requirements of a criticality loading curve. The burnup value assigned by the originating nuclear utility to each SNF assembly (assigned burnup) is used to load waste packages in compliance with a criticality loading curve. The burnup provided by a nuclear utility has uncertainties, so conservative calculation methods are used to characterize those uncertainties for incorporation into the criticality loading curves. Procedural safety controls ensure that the correct assembly is loaded into each waste package to prevent a misload that could create a condition affecting the safety margins. Probabilistic analyses show that procedural safety controls can minimize the chance of a misload but can not completely eliminate the possibility. Physical measurements of burnup with instrumentation in the surface facility are not necessary due to the conservative calculation methods used to produce the criticality loading curves. The reactor records assigned burnup of a commercial SNF assembly contains about two percent uncertainty, which is increased to five-percent to ensure conservatism. This five-percent uncertainty is accommodated by adjusting the criticality loading curve. Also, the record keeping methods of nuclear utilities are not uniform and the level of detail required by the NRC has varied over the last several decades. Thus, some SNF assemblies may have assigned burnups that are averages for a batch of assemblies with similar characteristics. Utilities typically have access to more detailed core-follow records that allow the batch average burnup to be changed to an assembly specific burnup. Alternatively, an additional safety margin is incorporated into the criticality loading curve to accommodate SNF assemblies with batch average burnups or greater uncertainties due to the methodology used by the nuclear utility. The utility records provide the assembly identifier

  15. Measurement of the 12C(e,e'p)11B Two-Body Breakup Reaction at High Missing Momentum Values

    SciTech Connect

    Monaghan, P.; Shneor, R.; Subedi, R.; Anderson, B.D.; Aniol, K.; Annand, J.; Arrington, J.; Benaoum, H.; Benmokhtar, F.; Bertin, P.; Bertozzi, W.; Boeglin, W.; Chen, J.P.; Choi, Seonho; Chudakov, E.; Ciofi degli-Atti, C.; Cisbani, E.; Cosyn, W.; Craver, B.; de Jager, C.W.; Feuerbach, R.J.; Folts, E.; Frullani, S.; Garibaldi, F.; Gayou, O.; Gilad, S.; Gilman, R.; Glamazdin, O.; Gomez, J.; Hansen, O.; Higinbotham, D.W.; Holmstrom, T.; Ibrahim, H.; Igarashi, R.; Jans, E.; Jiang, X.; Jiang, Y.; Kaufman, L.; Kelleher, A.; Kolarkar, A.; Kuchina, E.; Kumbartzki, G.; LeRose, J.J.; Lindgren, R.; Liyanage, N.; Margaziotis, D.J.; Markowitz, P.; Marrone, S.; Mazouz, M.; Meekins, D.; Michaels, R.; Moffit, B.; Morita, H.; Nanda, S.; Perdrisat, C.F.; Piasetzky, E.; Potokar, M.; Punjabi, V.; Qiang, Y.; Reinhold, J.; Reitz, B.; Ron, G.; Rosner, G.; Ryckebusch, J.; Saha, A.; Sawatzky, B.; Segal, J.; Shahinyan, A.; Sirca, S.; Slifer, K.; Solvignon, P.; Sulkosky, V.; Thompson, N.; Ulmer, P.E.; Urciuoli, G.M.; Voutier, E.; Wang, K.; Watson, J.W.; Weinstein, L.B.; Wojtsekhowski, B.; Wood, S.; Yao, H.; Zheng, X.; Zhu, L.

    2014-08-01

    The five-fold differential cross section for the 12C(e,e'p)11B reaction was determined over a missing momentum range of 200-400 MeV/c, in a kinematics regime with Bjorken x > 1 and Q2 = 2.0 (GeV/c)2. A comparison of the results and theoretical models and previous lower missing momentum data is shown. The theoretical calculations agree well with the data up to a missing momentum value of 325 MeV/c and then diverge for larger missing momenta. The extracted distorted momentum distribution is shown to be consistent with previous data and extends the range of available data up to 400 MeV/c.

  16. Tool 0.2: Value Brief Elevator Speech | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2: Value Brief Elevator Speech Tool 0.2: Value Brief Elevator Speech Tool 0.2: Value Brief Elevator Speech from the Introduction to Community Energy Strategic Planning. Tool 0.2: Value Brief Elevator Speech (44.96 KB) More Documents & Publications Guide to Community Energy Strategic Planning: Introduction CESP Tool 2.2: Stakeholder Invite

  17. Valuing Energy Efficiency: Considering Energy Performance in Real Estate Appraisals and Valuation

    Energy.gov [DOE]

    Presenters: John Scott, Colliers International; Devesh Nirmul, Inspyrod; Theddi Wright Chappell, Sustainable Values

  18. Buildings Energy Data Book: 1.3 Value of Construction and Research

    Buildings Energy Data Book

    5 2007-2010 Investment into Construction and Energy R&D, by Selected Country Year United States 2007 0.1 0.6 Australia 2010 5.2 1.8 China 2009 1.3 2.5 France 2007 0.4 1.6 Germany 2008 0.1 0.3 Italy 2010 0.9 0.8 Japan 2009 1.0 0.5 Norway 2008 1.4 2.2 Portugal 2008 1.7 6.0 South Africa 2007 0.1 16.2 South Korea 2008 2.5 1.0 United Kingdom 2008 0.1 0.2 Note(s): Source(s): Includes all construction (e.g., bridges, roads, dams, buildings, etc.). National Science Board, Science and Engineering

  19. Top Value Added Chemicals from Biomass: Volume I--Results of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... predominate in the conversion of building blocks to ... Efficiency and Renewable Energy Office in the Department ... industry flow-charts as shown in the ...

  20. CESP Tool 0.2: Value Brief Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0.2: Value Brief Presentation CESP Tool 0.2: Value Brief Presentation CESP Tool 0.2: Value Brief Presentation from the Introduction to Community Energy Strategic Planning. CESP Tool 0.2: Value Brief Presentation (810.6 KB) More Documents & Publications Guide to Community Energy Strategic Planning: Introduction Guide to Community Energy Strategic Planning Tool 0.2: Value Brief Elevator Speech