National Library of Energy BETA

Sample records for multi-building manufacturing facilities

  1. Manufacturing Demonstration Facility

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Demonstration Facility Bill Peter Director, Manufacturing Demonstration Facility Oak Ridge National Laboratory Advanced Manufacturing Office Peer Review June 14-15, 2016 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Today, ORNL is a leading science and energy laboratory The Manufacturing Demonstration Facility at Oak Ridge National Laboratory * R&D in materials, systems, and computational applications to develop broad of

  2. Wind Manufacturing Facilities

    Energy.gov [DOE]

    America's wind energy industry supports a growing domestic industrial base. Check out this map to find manufacturing facilities in your state. Last updated December 2013.

  3. Manufacturing Demonstration Facility Workshop Videos | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Demonstration Facility Workshop Videos Manufacturing Demonstration Facility Workshop Videos Dr. Leo Christodoulou, Program Manager, EERE Advanced Manufacturing ...

  4. Manufacturing Demonstration Facilities Workshop Agenda, March...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Demonstration Facilities Workshop Marriott Springhill Suites O'Hare - ... mechanics of the Manufacturing Demonstration Facility (MDF) concept and the ...

  5. Manufacturing Demonstration Facility

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to develop broad dissemination of additive manufacturing Industry Collaborations * ... 5 DOE-AMO 2015 Peer Review Understanding Additive Manufacturing Mainstream applications ...

  6. Electric Drive Component Manufacturing Facilities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Component Manufacturing Facilities Electric Drive Component Manufacturing Facilities 2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review ...

  7. Electric Drive Component Manufacturing Facilities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Component Manufacturing Facilities Electric Drive Component Manufacturing Facilities 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review ...

  8. Advanced Battery Manufacturing Facilities and Equipment Program...

    Energy.gov [DOE] (indexed site)

    More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program Fact Sheet: Grid-Scale ...

  9. Manufacturing Demonstration Facility Workshop | Department of...

    Energy.gov [DOE] (indexed site)

    March 12, 2012 The Manufacturing Demonstration Facility Workshop (held in Chicago, IL, on ... aspects of planning a series of Manufacturing Demonstration Facilities (MDFs). ...

  10. Manufacturing Demonstration Facilities Workshop Agenda, March...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Demonstration Facilities Workshop Agenda, March 2012 mdfworkshopagenda.pdf (263.06 KB) More Documents & Publications Manufacturing Demonstration Facility Workshop ...

  11. Advanced Battery Manufacturing Facilities and Equipment Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D.C. PDF icon esarravt002flicker2010p.pdf More Documents & Publications Advanced Battery Manufacturing Facilities and Equipment Program Advanced Battery Manufacturing...

  12. Solar Assembly Line at Manufacturing Facility

    Energy.gov [DOE]

    In this photograph, an associate oversees the automatic sorting of solar cells after final tests at a BP manufacturing facility.

  13. Manufacturing Demonstration Facilities Workshop Agenda, March 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Workshop Agenda, March 2012 Manufacturing Demonstration Facilities Workshop Agenda, March 2012 mdf_workshop_agenda.pdf (263.06 KB) More Documents & Publications Manufacturing Demonstration Facility Workshop Critical Materials Workshop Agenda Innovative Manufacturing Initiatives Recognition Day Agenda

  14. Oak Ridge Manufacturing Demonstration Facility (MDF)

    Energy.gov [DOE]

    The Manufacturing Demonstration Facility (MDF) is a collaborative manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber.

  15. Oak Ridge Manufacturing Demonstration Facility (MDF)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Manufacturing Demonstration Facility (MDF) is a collabora­tive manufacturing community that shares a common RD&D infrastructure. This shared infrastructure provides affordable access to advanced physical and virtual tools for rapidly demonstrating new manufacturing technologies and optimizing critical processes. Oak Ridge National Laboratory is home to AMO's MDF focused on Additive Manufacturing and Low-cost Carbon Fiber.

  16. Advanced Battery Manufacturing Facilities and Equipment Program...

    Energy.gov [DOE] (indexed site)

    and Equipment Program Advanced Battery Manufacturing Facilities and Equipment Program AVTA: 2010 Honda Civic HEV with Experimental Ultra Lead Acid Battery Testing Results

  17. Manufacturing Demonstration Facilities Workshop, March 12, 2012...

    Energy.gov [DOE] (indexed site)

    More Documents & Publications Manufacturing Demonstration Facility Workshop Microwave and Radio Frequency Workshop Microwave (MW) and Radio Frequency (RF) as Enabling Technologies ...

  18. EA-1638: Solyndra, Inc. Photovoltaic Manufacturing Facility in...

    Energy Saver

    8: Solyndra, Inc. Photovoltaic Manufacturing Facility in Fremont, CA EA-1638: Solyndra, Inc. Photovoltaic Manufacturing Facility in Fremont, CA March 2, 2009 EA-1638: Final ...

  19. Number of Large Energy User Manufacturing Facilities by Sector...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Number of Large Energy User Manufacturing Facilities by Sector and State (with Industrial Energy Consumption by State and Manufacturing Energy Consumption by Sector) State...

  20. Manufacturing Demonstration Facility: Low Temperature Materials Synthesis

    SciTech Connect

    Graham, David E.; Moon, Ji-Won; Armstrong, Beth L.; Datskos, Panos G.; Duty, Chad E.; Gresback, Ryan; Ivanov, Ilia N.; Jacobs, Christopher B.; Jellison, Gerald Earle; Jang, Gyoung Gug; Joshi, Pooran C.; Jung, Hyunsung; Meyer, III, Harry M.; Phelps, Tommy

    2015-06-30

    The Manufacturing Demonstration Facility (MDF) low temperature materials synthesis project was established to demonstrate a scalable and sustainable process to produce nanoparticles (NPs) for advanced manufacturing. Previous methods to chemically synthesize NPs typically required expensive, high-purity inorganic chemical reagents, organic solvents and high temperatures. These processes were typically applied at small laboratory scales at yields sufficient for NP characterization, but insufficient to support roll-to-roll processing efforts or device fabrication. The new NanoFermentation processes described here operated at a low temperature (~60 C) in low-cost, aqueous media using bacteria that produce extracellular NPs with controlled size and elemental stoichiometry. Up-scaling activities successfully demonstrated high NP yields and quality in a 900-L pilot-scale reactor, establishing this NanoFermentation process as a competitive biomanufacturing strategy to produce NPs for advanced manufacturing of power electronics, solid-state lighting and sensors.

  1. EA-1638: Solyndra, Inc. Photovoltaic Manufacturing Facility in Fremont, CA

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 8: Solyndra, Inc. Photovoltaic Manufacturing Facility in Fremont, CA EA-1638: Solyndra, Inc. Photovoltaic Manufacturing Facility in Fremont, CA March 2, 2009 EA-1638: Final Environmental Assessment Loan Guarantee to Solyndra, Inc. for Construction of A Photovoltaic Manufacturing Facility and Leasing of an Existing Commercial Facility in Fremont, California March 31, 2009 EA-1638: Finding of No Significant Impact Loan Guarantee to Solyndra, Inc. for Construction of a

  2. Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Separator | Department of Energy Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery Separator Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery Separator 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting arravt009_es_rumierz_2012_p.pdf (745.7 KB) More Documents & Publications Celgard US Manufacturing Facilities Initiative for Lithium-ion Battery Separator Celgard US

  3. Property Tax Abatement for Production and Manufacturing Facilities

    Energy.gov [DOE]

    Qualifying renewable energy manufacturing facilities are those that (1) produce materials, components or systems to convert solar, wind, geothermal, biomass, biogas or waste heat resources into...

  4. NREL: Energy Systems Integration Facility - Manufacturing and Material

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Diagnostics Manufacturing and Material Diagnostics Manufacturing and material diagnostics help manufacturers of clean energy technologies scale up production to volumes that meet U.S. Department of Energy and industry targets. The Energy Systems Integration Facility provides an array of instrumentation and diagnostic tools that allows highly skilled researchers to perform novel experimentation that would be cost- and time-prohibitive for most institutions. Currently, manufacturing activities

  5. First Solar Manufacturing Facility in Ohio

    Energy.gov [DOE]

    This photograph features the First Solar facilty, which manufactures more than 1 gigawatt (GW) of solar modules and announced capacity in excess of 1.4 GW by the end of 2010. The company is an...

  6. Sales Tax Exemption for Manufacturing Facilities

    Energy.gov [DOE]

    Energy efficiency projects must decrease the measurable amount of energy used by the facility by at least 15% percent while maintaining or increasing the production for the same period.

  7. Underground Manufacturing Facility, Sterling, Virginia. Final report

    SciTech Connect

    Barlow, R.M.

    1981-09-25

    The author set out to build an earth-sheltered light manufacturing plant (to produce expanded polystyrene insulation) and also an earth-sheltered passive solar residence. Results are presented of waterproofing, thermal monitoring, and life cycle study on the plant. It is concluded that the added cost of providing a support for carrying the earth deadload far outweighs the energy savings. (DLC)

  8. Manufacturing Demonstration Facility: Roll-to-Roll Processing

    SciTech Connect

    Datskos, Panos G; Joshi, Pooran C; List III, Frederick Alyious; Duty, Chad E; Armstrong, Beth L; Ivanov, Ilia N; Jacobs, Christopher B; Graham, David E; Moon, Ji Won

    2015-08-01

    This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean room facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.

  9. `Climate wise` program at the Cosmair, Inc. Clark Manufacturing Facility

    SciTech Connect

    Kraly, K.

    1997-12-31

    Viewgraphs from the conference presentation are reproduced in this paper, which outlines energy efficiency improvements and emissions reductions at a hair care products manufacturing facility. Program management focuses on employee involvement in internal audits, utility tracking, public relations, and preventative maintenance. Energy savings, cost savings, and emission reductions are presented for 1996 and projected to the year 2000. Other program aspects outlined include a summary of utility costs; solid waste; chilled water system modifications; lighting modifications; boiler upgrades; and heating, ventilating, and air conditioning improvements.

  10. EA-1645: Sage Electrochromics SageGlass High Volume Manufacturing Facility

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    in Fairbault, MN | Department of Energy 45: Sage Electrochromics SageGlass High Volume Manufacturing Facility in Fairbault, MN EA-1645: Sage Electrochromics SageGlass High Volume Manufacturing Facility in Fairbault, MN July 1, 2009 EA-1645: Final Environmental Assessment Sage Electrochromics Sageglass® High Volume Manufacturing (Hvm) Facility in Faribault, Minnesota July 1, 2009 EA-1645: Finding of No Significant Impact Loan Guarantee for Sage Electrochromics SageGlass High Volume

  11. EERE Success Story-Manufacturing Facility Opened Using EERE-Supported

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Low-Cost Fuel Cell Manufacturing Methods | Department of Energy Manufacturing Facility Opened Using EERE-Supported Low-Cost Fuel Cell Manufacturing Methods EERE Success Story-Manufacturing Facility Opened Using EERE-Supported Low-Cost Fuel Cell Manufacturing Methods July 26, 2013 - 12:00am Addthis Working with BASF of Florham Park, EERE-supported efforts led to a 75% reduction of the manufacturing cost of gas diffusion electrodes-a key component of fuel cells. To accomplish this cost

  12. Manufacturing Demonstration Facility: Roll-to-Roll Processing...

    Office of Scientific and Technical Information (OSTI)

    effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. ...

  13. Economic Development Impacts in Colorado from Four Vestas Manufacturing Facilities, Wind Powering America Fact Sheet Series

    SciTech Connect

    Not Available

    2009-04-01

    This case study summarizes the economic development benefits to Colorado from four Vestas manufacturing facilities: one in Windsor, two in Brighton, and one in Pueblo (which is planned to be the world's largest tower-manufacturing facility). In the midst of an economic slowdown during which numerous U.S. manufacturers have closed their doors, wind energy component manufacturing is one U.S. industry that has experienced unprecedented growth during the past few years. As demand for wind power in the United States has increased and transportation costs have increased around the world, states have seen a significant increase in the number of manufacturers that produce wind turbine components in the United States. Vestas' Colorado operations will bring approximately $700 million in capital investment and nearly 2,500 jobs to the state.

  14. DECOMMISSIONING OF THE 247-F FUEL MANUFACTURING FACILITY AT THE SAVANNAH RIVER SITE

    SciTech Connect

    Santos, J; Stephen Chostner, S

    2007-05-22

    Building 247-F at SRS was a roughly 110,000 ft{sup 2} two-story facility designed and constructed during the height of the cold war naval buildup to provide additional naval nuclear fuel manufacturing capacity in early 1980s. The building layout is shown in Fig. 1. A photograph of the facility is shown in Fig. 2. The manufacturing process employed a wide variety of acids, bases, and other hazardous materials. As the cold war wound down, the need for naval fuel declined. Consequently, the facility was shut down and underwent initial deactivation. All process systems were flushed with water and drained using the existing process drain valves. However, since these drains were not always installed at the lowest point in piping and equipment systems, a significant volume of liquid remained after initial deactivation was completed in 1990. At that time, a non-destructive assay of the process area identified approximately 17 (+/- 100%) kg of uranium held up in equipment and piping.

  15. Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Flow of Materials through Industry / Sustainable 1 Manufacturing 2 Technology Assessment 3 Contents 4 1. Introduction to the Technology/System ............................................................................................... 1 5 1.1 Supply chain and material flow analysis ....................................................................................... 1 6 2. Technology Assessment and Potential

  16. Creation of a U.S. Phosphorescent OLED Lighting Panel Manufacturing Facility

    SciTech Connect

    Hack, Michael

    2013-09-30

    Universal Display Corporation (UDC) has pioneered high efficacy phosphorescent OLED (PHOLED™) technology to enable the realization of an exciting new form of high quality, energy saving solid-date lighting. In laboratory test devices, we have demonstrated greater than 100 lm/W conversion efficacy. In this program, Universal Display will demonstrate the scalability of its proprietary UniversalPHOLED technology and materials for the manufacture of white OLED lighting panels that meet commercial lighting targets. Moser Baer Technologies will design and build a U.S.- based pilot facility. The objective of this project is to establish a pilot phosphorescent OLED (PHOLED) manufacturing line in the U.S. Our goal is that at the end of the project, prototype lighting panels could be provided to U.S. luminaire manufacturers for incorporation into products to facilitate the testing of design concepts and to gauge customer acceptance, so as to facilitate the growth of the embryonic U.S. OLED lighting industry. In addition, the team will provide a cost of ownership analysis to quantify production costs including OLED performance metrics which relate to OLED cost such as yield, materials usage, cycle time, substrate area, and capital depreciation. This project was part of a new DOE initiative designed to help establish and maintain U.S. leadership in this program will support key DOE objectives by showing a path to meet Department of Energy Solid-State Lighting Manufacturing Roadmap cost targets, as well as meeting its efficiency targets by demonstrating the energy saving potential of our technology through the realization of greater than 76 lm/W OLED lighting panels by 2012.

  17. Mirror Fusion Test Facility-B (MFTF-B) axicell configuration: NbTi magnet system. Manufacturing/producibility final report. Volume 2

    SciTech Connect

    Ritschel, A.J.; White, W.L.

    1985-05-01

    This Final MFTF-B Manufacturing/Producibility Report covers facilities, tooling plan, manufacturing sequence, schedule and performance, producibility, and lessons learned for the solenoid, axicell, and transition coils, as well as a deactivation plan, conclusions, references, and appendices.

  18. Identification of biological processes in a mixed hydrocarbon plume at a paint manufacturing facility

    SciTech Connect

    McLaughlan, R.G.; Walsh, K.P.; Henkler, R.D.; Anderson, B.N.

    1996-12-31

    In situ biodegradation is increasingly being used as a cost effective remedial strategy for contaminated sites. However, for the remediation to be successful, it is necessary to understand the fundamental geochemical and microbiological processes occurring at a particular site. At a paint manufacturing facility, a mixed hydrocarbon plume containing both BTEX and paraffinic hydrocarbons (Stoddard solvent) has contaminated the aquifer. The microbial processes occurring in the plume were investigated to better define the capacity of the aquifer to degrade hydrocarbons. Microbial oxidation of hydrocarbons is known to be coupled with the reduction of redox active species including oxygen, nitrate, ferric iron and sulphate as well as the production of methane. Water quality data, redox parameters and contaminant information were collected from the site to identify candidate biological processes occurring. The results show that as the contaminant concentration increases, the redox decreases indicating the generation of a more reduced environment. The decreasing redox correlates with increased concentrations of ammonia, ferrous iron and sulphide. The data indicates that there have been a range of different electron acceptor systems operating at the site. This has been correlated with a theoretical amount of benzene consumed. The chemistry from the wells at the site show that at least 47 mg/L of benzene is capable of being mineralized within the aquifer by microbial based transformations given the current contaminant loading and flowrate. 3 refs., 1 fig., 2 tabs.

  19. Implementation of Title V requirements at an aerospace manufacturing and rework facility

    SciTech Connect

    Stark, W.T.; Ayers, M.F.; Reed, J.T.

    1998-12-31

    The Clean Air Act Amendments of 1990 forced many sources to apply for permits and be subject to both state and federal oversight through the operating permit programs implemented under Title V. In order to comply with new permit provisions, many sources were forced to develop and implement complex programs that would both ensure compliance and allow maximum operating flexibility. Although no material tracking or reporting system existed before the Learjet facility became subject to Title V, careful planning and use of the proper tools and procedures allowed the implementation of a facility-wide data management and compliance reporting system that is not process dependent, allows maximum operating flexibility, and adds relatively few inconveniences to operations personnel. Also, as new requirements become effective in the coming years, the flexibility of the system allows it to be easily modified by facility personnel.

  20. Manufacturing technologies

    SciTech Connect

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  1. Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities Facilities World-class facilities provide unique problem-solving opportunities. Unique research facilities support data-driven, agile solutions. Los Alamos National Laboratory has a number of facilities that support work related to sensor technologies and solutions including: Center for Integrated Nanotechnologies Dual-Axis Radiographic Hydrodynamic Test Facility The Explosives Center Lujan Neutron Scattering Center Materials Science Laboratory National High Magnetic Field Laboratory

  2. Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear Energy Safety Technologies Facilities Battery Abuse Testing Laboratory Cylindrical Boiling Facility ...

  3. Department of Energy Finalizes $197 Million Loan Guarantee to SoloPower, Inc. for a Solar Manufacturing Facility

    Energy.gov [DOE]

    Project Expected to Create Over 700 Jobs and Create Greater Efficiencies in the Manufacturing of Photovoltaic Modules

  4. Manufacturing Demonstration Facility

    Energy Saver

    ... open ports) * Technology Transitioned to Industry This Year * Q10 System has new e-beam gunfilament * Increase maximum melt current from 21 to 35 mA Current A2 * Potential to ...

  5. Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... It also provides an outstanding controlled environment for Sandia's recent spent nuclear fuel combustion experiments. HPC Facilities CSRIBldghomepg The Computer Science Research ...

  6. Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    First Power for SWiFT Turbine Achieved during Recommissioning Facilities, News, Renewable Energy, SWIFT, Wind Energy, Wind News First Power for SWiFT Turbine Achieved during ...

  7. Innovative Manufacturing Initiative Project Selections

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Department announced nearly $23 million for 12 projects across the country to advance technologies aimed at helping American manufacturers dramatically increase the energy efficiency of their manufacturing facilities, lower costs, and develop new manufacturing technologies.

  8. Facilities | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and virtual tools and enable demonstration in targeted technical areas of manufacturing. ... Oak Ridge Manufacturing Demonstration Facility (MDF) Work at the Oak Ridge MDF focuses on ...

  9. Field test of a generic method for halogenated hydrocarbons: Semivost test at a chemical manufacturing facility. Final project report, August 1992-August 1993

    SciTech Connect

    McGaughey, J.F.; Bursey, J.T.; Merrill, R.G.

    1996-11-01

    The candidate methods for semivolatile organic compounds are SW-846 Sampling Method 0010 and Analytical Method 8270, which are applicable to stationary sources. Two field tests were conducted using quadruple sampling trains with dynamic spiking were performed according to the guidelines of EPA Method 301. The first field test was performed at a site with low levels of moisture. The second test reported here was conducted at a chemical manufacturing facility where chemical wastes were burned in a coal-fired boiler. Poor recoveries obtained for the spiked analytes at the second test were attributed to wet sorbent from the sampling train, use of methanol to effect complete transfer of wet sorbent from the sampling module, and use of extraction techniques which did not effect a complete separation of methylene chloride from methanol. A procedure to address problems with preparation of samples from Method 0010 is included in the report.

  10. Facility Floorplan

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    facility floorplan Facility Floorplan

  11. Sustainable Manufacturing

    Energy.gov [DOE] (indexed site)

    Workshop on Sustainable Manufacturing January 6-7, 2016 Portland, OR DOE Workshop on Sustainable Manufacturing January 6-7, 2016 Portland, OR Sustainable Manufacturing: Definitions ...

  12. Additive Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MST » MST Research Programs » Additive Manufacturing Additive Manufacturing A method allowing unparalleled manufacturing control, data visualization, and high-value parts repair. Through additive manufacturing, Los Alamos is developing materials for the future. Taking complex manufacturing challenges from design to fabrication. A science and engineering approach for additive manufacturing solutions. Get Expertise John Carpenter Technical Staff Member Metallurgy Email Division Leader Materials

  13. Electric Drive Component Manufacturing Facilities

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  14. Electric Drive Component Manufacturing Facilities

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  15. Electric Drive Component Manufacturing Facilities

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... - Support 100135 kW peak power - Existing motor and next gen IPM motor - Controller is half the size of Gen 1 - Reduced weight and cost - Testing occurring now DOE APEEM ...

  16. Electric Drive Component Manufacturing Facilities

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  17. Electric Drive Component Manufacturing Facilities

    Energy.gov [DOE]

    2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  18. Advanced Manufacturing Office (Formerly Industrial Technologies Program) |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D Workshop in Washington, DC, August 11-12, 2011. DOE's Advanced Manufacturing Office (85.03 KB) More Documents & Publications Innovative Manufacturing Initiative Recognition Day Manufacturing Demonstration Facilities Workshop Agenda, March 2012 Advanced Manufacturing

  19. Advanced Manufacturing Office FY14 Budget At-a-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... by 25 percent over ten years and a culture of continuous improvement in energy management. ... Advanced manufacturing R&D facilities such as the Clean Energy Manufacturing Innovation ...

  20. Evaluation of advanced polymers for additive manufacturing (Technical...

    Office of Scientific and Technical Information (OSTI)

    Title: Evaluation of advanced polymers for additive manufacturing The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge ...

  1. 700 bar COPV Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bar COPV Manufacturing - IACMI 24 August 2016 Brian Rice (UDRI) IACMI CGS Director 2 IACMI NNMI Network Plus: * Photonics (NY) (DOD) * Flexible Electronics (CA) (DOD) Expected: * Functional Fabrics (DOD) * Smart Manufacturing (DOE) 3 IACMI Shared RD&D facilities will support industry 4 IACMI An integrated approach is required 5 IACMI Economic Development Council A Platform for State Economic Collaboration Each state deploys hundreds of millions of dollars annually to create jobs and

  2. NREL: Innovation Impact - Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Buildings Menu Home Home Solar Solar Wind Wind Analysis Analysis Bioenergy Bioenergy Buildings Buildings Transportation Transportation Manufacturing Manufacturing Energy Systems Integration Energy Systems Integration Buildings Use 40% of U.S. Energy Close Americans spend $400 billion annually to power homes and commercial buildings. An estimated $80 billion could be saved through energy efficiency. Close NREL's net-zero-energy Research Support Facility employs cutting-edge energy efficiency

  3. Smart Manufacturing Innovation Institute: Overview, Goals and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... o A manufacturing platform architecture, based on an open-standards, open- ... facilities Transition Plan o Sustainability plan for the proposed Institute past ...

  4. Advanced Manufacturing Office Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications Microwave and Radio Frequency Workshop Manufacturing Demonstration Facility Workshop Microwave (MW) and Radio Frequency (RF) as Enabling Technologies ...

  5. Low Energy Ion Implantationin Semiconductor Manufacturing | U...

    Office of Science (SC)

    Low Energy Ion Implantation in Semiconductor Manufacturing Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science ...

  6. LARGE INDUSTRIAL FACILITIES BY STATE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    LARGE INDUSTRIAL FACILITIES BY STATE LARGE INDUSTRIAL FACILITIES BY STATE PDF icon Number of Large Energy User Manufacturing Facilities by Sector and State (with Industrial Energy...

  7. Institute for Advanced Composites Manufacturing Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Facilities » Institute for Advanced Composites Manufacturing Innovation Institute for Advanced Composites Manufacturing Innovation Institute for Advanced Composites Manufacturing Innovation Thumbnail on opening image of linked video. The Institute for Advanced Composites Manufacturing Innovation (IACMI) is a public-private partnership creating clean energy solutions and catalyzing manufacturing competitiveness across the U.S. advanced composite ecosystem. This partnership of

  8. Sustainable Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Principal Investigator (Presenter): Dr. Troy D. Marusich , CTO Washington, D.C. May 6-7, 2014 Third Wave Systems Inc. U.S. DOE Advanced Manufacturing Office Peer Review Meeting This presentation does not contain any proprietary, confidential, or otherwise restricted information. o Project Objective  What are you trying to do?  Develop and demonstrate a new manufacturing-informed design paradigm to dramatically improve manufacturing productivity, quality, and costs of machined components

  9. Fermilab | Illinois Accelerator Research Center | Fermilab Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities Through IARC access to many Fermilab facilities would be possible. These facilities are further detailed below, but include: conventional and superconducting magnet testing and assembly facilities, SRF cavity assembly, processing and test facilities, access to various particle beams, superconducting cabling manufacturing and testing, particle detector manufacturing and development and high performance computing resources. 1) Beam Test Facilities: NML Pulsed SRF Facility A RF unit test

  10. Manufacturing Glossary

    Annual Energy Outlook

    Energy Efficiency Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Home > Energy Users > Energy Efficiency Page > Glossary for the Manufacturing...

  11. additive manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    additive manufacturing - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power ...

  12. Development of manufacturing capability for the fabrication of the Nb/sub 3/Sn superconductor for the High Field Test Facility. Final report

    SciTech Connect

    Spencer, C R

    1981-01-01

    Construction of High Field Test Facility (HFTF) at Lawrence Livermore Laboratory (LLNL) requires an extended surface Nb/sub 3/Sn superconductor cable of carrying currents in excess of 7500 amperes in a 12 Tesla magnetic field. This conductor consists of a 5.4 mm x 11.0 mm superconducting core onto whose broad surfaces are soldered embossed oxygen free copper strips. Two different core designs have been developed and the feasibility of each design evaluated. Equipment necessary to produce the conductor were developed and techniques of production were explored.

  13. Manufacturing Laboratory (Fact Sheet)

    SciTech Connect

    Not Available

    2011-10-01

    This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Manufacturing Laboratory at the Energy Systems Integration Facility. The Manufacturing Laboratory at NREL's Energy Systems Integration Facility (ESIF) focuses on developing methods and technologies that will assist manufacturers of hydrogen and fuel cell technologies, as well as other renewable energy technologies, to scale up their manufacturing capabilities to volumes that meet DOE and industry targets. Specifically, the manufacturing activity is currently focused on developing and validating quality control techniques to assist manufacturers of low temperature and high temperature fuel cells in the transition from low to high volume production methods for cells and stacks. Capabilities include initial proof-of-concept studies through prototype system development and in-line validation. Existing diagnostic capabilities address a wide range of materials, including polymer films, carbon and catalyst coatings, carbon fiber papers and wovens, and multi-layer assemblies of these materials, as well as ceramic-based materials in pre- or post-fired forms. Work leading to the development of non-contact, non-destructive techniques to measure critical dimensional and functional properties of fuel cell and other materials, and validation of those techniques on the continuous processing line. This work will be supported by materials provided by our partners. Looking forward, the equipment in the laboratory is set up to be modified and extended to provide processing capabilities such as coating, casting, and deposition of functional layers, as well as associated processes such as drying or curing. In addition, continuous processes are used for components of organic and thin film photovoltaics (PV) as well as battery technologies, so synergies with these important areas will be explored.

  14. Additive Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... laser-sintering) Optomec LENS MR-7 Sciaky EBAM 68 Non-metal additive manufacturing Powder bed FORMIGA P 110 PolyJet 3D ... Fused deposition modeling print technology MakerBot ...

  15. Sherwin-Williams Richmond, Kentucky, Facility Achieves 26%...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    dozens of energy-savings projects over the past few years. The facility is a Lean Manufacturing Leader, adhering to the lean manufacturing business- management strategy, ...

  16. Manufacturing Innovation Institute for Smart Manufacturing: Advanced...

    Energy.gov [DOE] (indexed site)

    Energy Manufacturing Innovation Institute, which will be focused on smart manufacturing. ... As part of President Obama's National Network for Manufacturing Innovation (NNMI) ...

  17. The President's Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The President's Manufacturing Initiative Manufacturing Initiative Roadmap Workshop on Roadmap Workshop on Manufacturing R&D for Manufacturing R&D for the Hydrogen Economy the ...

  18. Environmental, Health and Safety Assessment: ATS 7H Program (Phase 3R) Test Activities at the GE Power Systems Gas Turbine Manufacturing Facility, Greenville, SC

    SciTech Connect

    1998-11-17

    International Technology Corporation (IT) was contracted by General Electric Company (GE) to assist in the preparation of an Environmental, Health and Safety (HI&3) assessment of the implementation of Phase 3R of the Advanced Turbine System (ATS) 7H program at the GE Gas Turbines facility located in Greenville, South Carolina. The assessment was prepared in accordance with GE's contractual agreement with the U.S. Department of Energy (GE/DOE Cooperative Agreement DE-FC21-95MC3 1176) and supports compliance with the requirements of the National Environmental Policy Act of 1970. This report provides a summary of the EH&S review and includes the following: General description of current site operations and EH&S status, Description of proposed ATS 7H-related activities and discussion of the resulting environmental, health, safety and other impacts to the site and surrounding area. Listing of permits and/or licenses required to comply with federal, state and local regulations for proposed 7H-related activities. Assessment of adequacy of current and required permits, licenses, programs and/or plans.

  19. Chapter 6 — Innovating Clean Energy Technologies in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE)

    This chapter examines the opportunities for improvements in energy and materials utilization within three spaces: individual manufacturing processes and unit operations; goods-producing facilities, including manufacturing business processes; and manufacturing supply chains and manufactured goods, including impacts from all phases of the product life cycle.

  20. AMO Requests Technical Topics Suitable for a Manufacturing Innovation Institute

    Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market challenges, supply chain challenges, and shared facility needs to address challenges associated with clean energy manufacturing.

  1. EERE's Southeast Swing: Clean Energy Manufacturing in the Southeast...

    Office of Environmental Management (EM)

    ... I also visited the headquarters and cell manufacturing facilities of Suniva, Inc., an advanced U.S.-based high-efficiency solar cell and module manufacturer based in Norcross, ...

  2. Manufacturing Perspective

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EOT_RT_Sub_Template.ppt | 1/6/2009 | 1 BOEING is a trademark of Boeing Management Company. Copyright © 2009 Boeing. All rights reserved. Compressed Hydrogen Storage Workshop Manufacturing Perspective Karl M. Nelson (karl.m.nelson@boeing.com) Boeing Research & Technology Engineering, Operations & Technology | Boeing Research & Technology Materials & Fabrication Technology EOT_RT_Sub_Template.ppt | 1/12/2009 | Structural Tech 2 Copyright © 2009 Boeing. All rights reserved. DOE

  3. Green Manufacturing

    SciTech Connect

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  4. Strengthening U.S. Leadership in Advanced Manufacturing | Department...

    Energy.gov [DOE] (indexed site)

    of workers at its manufacturing facilities in California, Michigan, and Tennessee. ... The businesses represented yesterday ranged from solar and battery to fuel cell and ...

  5. Advanced Battery Materials Synthesis and Manufacturing R&D Program...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Advanced Battery Materials Synthesis and Manufacturing R&D Program Argonne's Materials Engineering Research Facility (MERF) supports the laboratory's Advanced Battery Materials...

  6. Carbon Nanotubes and Nano-Structure Manufacturing at TJNAF |...

    Office of Science (SC)

    Carbon Nanotubes and Nano-Structure Manufacturing at TJNAF Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Applications of Nuclear Science ...

  7. Utility of Big Area Additive Manufacturing (BAAM) For The Rapid...

    Office of Scientific and Technical Information (OSTI)

    This Oak Ridge National Laboratory (ORNL) Manufacturing Development Facility (MDF) ... and demonstrated the integration of components onto a prototype body part for a vehicle. ...

  8. Institute for Advanced Composites Manufacturing Innovation-Inaugural...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    for Advanced Composites Manufacturing Innovation-Inaugural Members Meeting - Sandia Energy ... Center for Infrastructure Research and Innovation Combustion Research Facility Joint ...

  9. EA-1645: Sage Electrochromics SageGlass High Volume Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sage Electrochromics Sageglass High Volume Manufacturing (Hvm) Facility in Faribault, Minnesota July 1, 2009 EA-1645: Finding of No Significant Impact Loan Guarantee for Sage ...

  10. Panel on Advanced Manufacturing Technology Analysis

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    on Advanced Manufacturing Technology Analysis: Session 1- Impacts at the Unit Operations & Plant/Facility Levels Session 2 - Analysis Methodology & Tools AMO Peer Review Meeting June 14, 2016 Joe Cresko, DOE-AMO Alberta Carpenter, NREL William Morrow, LBNL Sachin Nimbalkar, ORNL Diane Graziano, ANL 1 Advanced Manufacturing - Impacts at the Unit Operations & Plant/Facility Levels - PH accounts for about 70% of all process energy 1 - Overall, process heating systems lose more than

  11. Tax Credit for Renewable Energy Equipment Manufacturers | Department...

    Energy.gov [DOE] (indexed site)

    50% of eligible costs (10% per year for 5 years) Summary Note: The Tax Credit for Renewable Energy Resource Equipment Manufacturing Facilities has expired for new facilities. To be...

  12. Advanced Battery Manufacturing Facilities and Equipment Program

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  13. Manufacturing Demonstration Facilities Workshop, March 12, 2012

    Energy.gov [DOE] (indexed site)

    ... Source: American Museum of Natural History Center for Biodiversity and ... Switches Non laser diodes Laser diodes Solar Cells Converters Communications Bio- ...

  14. Advanced Battery Manufacturing Facilities and Equipment Program

    Energy.gov [DOE]

    2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  15. Advanced Battery Manufacturing Facilities and Equipment Program

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  16. DOE's Manufacturing Demonstration Facility Helps Set Guinness...

    Energy Saver

    ... RSVP for the Michigan boot camp on September 14th at NextEnergy in Detroit. RSVP for the Georgia boot camp on October 4th at Georgia Tech in Atlanta. RSVP for the Virginia boot ...

  17. U.S. Advanced Manufacturing and Clean Energy Technology Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Manufacturing and Clean Energy Technology Challenges May 6, 2014 AMO Peer Review Mark Johnson Director Advanced Manufacturing Office www.manufacturing.energy.gov This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 Outline * Big Picture on Manufacturing in US * Focus on Advanced Manufacturing * AMO Organization * Technical Assistance * R&D Facilities * R&D Projects * Goals for Meeting 3 Products invented here, now made

  18. Smart Manufacturing: Transforming American Manufacturing with Information

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology | Department of Energy Smart Manufacturing: Transforming American Manufacturing with Information Technology Smart Manufacturing: Transforming American Manufacturing with Information Technology June 30, 2016 - 4:30pm Addthis Watch the video above to learn more about how technologies developed by the smart manufacturing institute will make U.S. manufacturing more productive, energy efficient, and competitive. Our country is known for its culture of innovation. We are a country of

  19. Advanced Manufacturing Office: Smart Manufacturing Industry Day...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Smart Manufacturing is a network data-driven process that combines innovative automation ... Smart Manufacturing is a network data-driven process that combines innovative automation ...

  20. Photovoltaic manufacturing technology, Phase 1

    SciTech Connect

    Not Available

    1992-10-01

    This report describes subcontracted research by the Chronar Corporation, prepared by Advanced Photovoltaic Systems, Inc. (APS) for Phase 1 of the Photovoltaic Manufacturing Technology Development project. Amorphous silicon is chosen as the PV technology that Chronar Corporation and APS believe offers the greatest potential for manufacturing improvements, which, in turn, will result in significant cost reductions and performance improvements in photovoltaic products. The APS Eureka'' facility was chosen as the manufacturing system that can offer the possibility of achieving these production enhancements. The relationship of the Eureka'' facility to Chronar's batch'' plants is discussed. Five key areas are also identified that could meet the objectives of manufacturing potential that could lead to improved performance, reduced manufacturing costs, and significantly increased production. The projected long-term potential benefits of these areas are discussed, as well as problems that may impede the achievement of the hoped-for developments. A significant number of the problems discussed are of a generic nature and could be of general interest to the industry. The final section of this document addresses the cost and time estimates for achieving the solutions to the problems discussed earlier. Emphasis is placed on the number, type, and cost of the human resources required for the project.

  1. Laser Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laser Facilities Current Schedule of Experiments Operation Schedule Janus Titan Europa COMET Facility Floorplan

  2. Innovative Manufacturing Initiatives Recognition Day Agenda | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Initiatives Recognition Day Agenda Innovative Manufacturing Initiatives Recognition Day Agenda imi_recogitionday_agenda.pdf (76.67 KB) More Documents & Publications Innovative Manufacturing Initiative Recognition Day Manufacturing Demonstration Facilities Workshop Agenda, March 2012 Critical Materials Workshop Agenda

  3. Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Science & Innovation » Energy Efficiency » Manufacturing Manufacturing Manufacturing is how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Manufacturing is the lifeblood of the American economy -- providing jobs

  4. Manufacturing in Milwaukee: An Interview with the CEO of Helios Solar Works

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy in Milwaukee: An Interview with the CEO of Helios Solar Works Manufacturing in Milwaukee: An Interview with the CEO of Helios Solar Works February 8, 2013 - 12:02pm Addthis Inside the Helios Solar Works manufacturing facility. | Photo courtesy of Helios Solar Works. Inside the Helios Solar Works manufacturing facility. | Photo courtesy of Helios Solar Works. Inside the Helios Solar Works manufacturing facility. | Photo courtesy of Helios Solar Works. Inside the Helios

  5. Nuclear Facilities Production Facilities

    National Nuclear Security Administration (NNSA)

    Facilities Production Facilities Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Sand 2011-4582P. ENERGY U.S. DEPARTMENT OF Gamma Irradiation Facility (GIF) The GIF provides test cells for the irradiation of experiments with high-intensity gamma ray sources. The main features

  6. Utility of Big Area Additive Manufacturing (BAAM) For The Rapid Manufacture of Customized Electric Vehicles

    SciTech Connect

    Love, Lonnie J.

    2015-08-01

    This Oak Ridge National Laboratory (ORNL) Manufacturing Development Facility (MDF) technical collaboration project was conducted in two phases as a CRADA with Local Motors Inc. Phase 1 was previously reported as Advanced Manufacturing of Complex Cyber Mechanical Devices through Community Engagement and Micro-manufacturing and demonstrated the integration of components onto a prototype body part for a vehicle. Phase 2 was reported as Utility of Big Area Additive Manufacturing (BAAM) for the Rapid Manufacture of Customized Electric Vehicles and demonstrated the high profile live printing of an all-electric vehicle using ONRL s Big Area Additive Manufacturing (BAAM) technology. This demonstration generated considerable national attention and successfully demonstrated the capabilities of the BAAM system as developed by ORNL and Cincinnati, Inc. and the feasibility of additive manufacturing of a full scale electric vehicle as envisioned by the CRADA partner Local Motors, Inc.

  7. Manufacturing Innovation Multi-Topic Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation Multi-Topic Workshop Manufacturing Innovation Multi-Topic Workshop DOE's Advanced Manufacturing Office (AMO) and the Office of Secretary of Defense Manufacturing Technology Program (OSD ManTech) held a joint workshop October 8 and 9, 2014 in Fort Worth, TX. This workshop identified mid-Technology Readiness Level (TRL) research and development (R&D) needs, market and supply chain challenges, and shared facility needs for advanced manufacturing. The workshop complemented a recently

  8. 3D Printed Car at the International Manufacturing Technology Show |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 3D Printed Car at the International Manufacturing Technology Show 3D Printed Car at the International Manufacturing Technology Show Addthis WORLD'S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak Ridge National Laboratory's Manufacturing Demonstration Facility-with funding support from the Energy

  9. NREL: Hydrogen and Fuel Cells Research - Fuel Cell Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Cell Manufacturing Photo of scientific equipment in laboratory setting. NREL's in-line diagnostics help industry identify defects in fuel cell components. This small-scale manufacturing line at NREL's Energy Systems Integration Facility can convey fuel cell component materials at speeds of 100 feet per minute. NREL's fuel cell manufacturing R&D focuses on improving quality-inspection practices for high-volume manufacturing processes to enable higher production volumes, increased reliability,

  10. The Advanced Manufacturing Partnership and the Advanced Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program ...

  11. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Bio-Manufacturing: A Strategic clean energy manufacturing opportunity Breakout Session 1: New Developments and ...

  12. National Electrical Manufacturers Association

    Office of Environmental Management (EM)

    3, 2014) Dear Mr. Croley, The National Electrical Manufacturers Association (NEMA) thanks ... As you may know, NEMA is the trade association of choice for the electrical manufacturing ...

  13. Next Generation Manufacturing Processes

    Energy.gov [DOE]

    New process technologies can rejuvenate U.S. manufacturing. Novel processing concepts can open pathways to double net energy productivity, enabling rapid manufacture of energy-efficient, high...

  14. HPC4Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lab capabilities Manufacturing domain expertise National mission and guidance Bringing HPC to U.S. Manufacturers Energy Efficient Processes Energy Efficient Products...

  15. ARM - SGP Extended Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Extended Facility SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration...

  16. ARM - SGP Intermediate Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Intermediate Facility SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration...

  17. ARM - SGP Central Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Central Facility SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration...

  18. All Manufacturing Footprint, October 2012 (MECS 2006)

    SciTech Connect

    2012-10-17

    Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.

  19. Advanced Manufacturing Technician

    Energy.gov [DOE]

    Alternate Title(s):Manufacturing Production Technician; Electro-Mechanical Technician; Electronics Maintenance Technician  

  20. Advanced Manufacturing Office News

    SciTech Connect

    2013-08-08

    News stories about advanced manufacturing, events, and office accomplishments. Subscribe to receive updates.

  1. Smart Manufacturing: Transforming American Manufacturing with...

    Energy Saver

    ... House fact sheet on President Obama's announcement of investments in new manufacturing hubs. Addthis Related Articles AMO to Issue FOA for New Innovation Institute on Smart ...

  2. Huntington Resource Recovery Facility Biomass Facility | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Resource Recovery Facility Biomass Facility Jump to: navigation, search Name Huntington Resource Recovery Facility Biomass Facility Facility Huntington Resource Recovery Facility...

  3. Wheelabrator Sherman Energy Facility Biomass Facility | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Sherman Energy Facility Biomass Facility Jump to: navigation, search Name Wheelabrator Sherman Energy Facility Biomass Facility Facility Wheelabrator Sherman Energy Facility Sector...

  4. Additive Manufacturing: Pursuing the Promise

    Energy.gov [DOE]

    Fact sheet overviewing additive manufacturing techniques that are projected to exert a profound impact on manufacturing.

  5. Ashton Extended Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ashton Extended Facility Map

  6. Byron Extended Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Byron Extended Facility Map

  7. All Manufacturing Footprint, December 2010 (MECS 2006)

    SciTech Connect

    none,

    2010-06-01

    Manufacturing energy and carbon footprints map fuel energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing industry sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released due to the combustion of fuel. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high-level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The energy data is primarily provided by the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), and therefore reflects consumption in the year 2006, when the survey was last completed.

  8. User Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    User Facilities User Facilities User facility agreements allow Los Alamos partners and other entities to conduct research at our unique facilities. In 2011, LANL hosted more than 1,200 users at CINT, LANSCE, and NHMFL. Users came from across the DOE complex, from international academia, and from industrial companies from 45 states across the U.S. Unique world-class user facilities foster rich research opportunities Through its technology transfer efforts, LANL can implement user facility

  9. The Advanced Manufacturing Partnership and the Advanced Manufacturing Program Office

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office Webcasts for Industry Advanced Manufacturing Office US Department of Energy Mike Molnar Chief Manufacturing Officer National Institute of Standards and Technology Carrie Houtman Senior Public Policy Manager Dow Chemical Overview * Advanced Manufacturing Activities * Advanced Manufacturing Partnership (AMP) * AMP Steering Committee * AMP Workstream Study Groups * Office of Manufacturing Policy (OMP) * NSTC

  10. User Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Collaboration User Facilities collaborationassetsimagesicon-collaboration.jpg User Facilities A new research frontier awaits Our door is open and we thrive on mutually...

  11. Assessment of the Current Level of Automation in the Manufacture...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Facility Capacity with Automation FuelCell Energy 350 kW 25 MW 70 MW 140 MW 280 MW ... Support for Cell and Stack Manufacture FuelCell Energy - Increase casting thickness ...

  12. Investing in a New Era of Manufacturing Technology

    Energy.gov [DOE]

    The Energy Department will be investing up to $120 million over three years in the development of transformational manufacturing technologies and innovative materials that could enable industrial facilities to dramatically increase their energy efficiency.

  13. Virginia Manufacturer Keeps Jobs Local By Embracing Energy Efficiency

    Energy.gov [DOE]

    Volvo Trucks’ New River Valley (NRV) plant, located in Dublin, Virginia, is the company’s largest truck manufacturing facility in the world—and the plant’s senior management aims to keep it that way.

  14. Economic Measurements of Polysilicon for the Photovoltaic Industry: Market Competition and Manufacturing Competitiveness

    Office of Energy Efficiency and Renewable Energy (EERE)

    Using the calculations of several economic indicators, this study quantitatively measures the market competition, manufacturing costs, and prices for different technologies in different facility...

  15. The Use of Additive Manufacturing for Fabrication of Multi-Function...

    Office of Scientific and Technical Information (OSTI)

    To alleviate this impediment the U.S. Department of Energy has established a Manufacturing Demonstration Facility (MDF) at their Oak Ridge National Laboratory (ORNL) in Tennessee ...

  16. EVENT: 2016 DOE ADVANCED MANUFACTURING OFFICE PEER REVIEW – JUNE 14-15, 2016

    Energy.gov [DOE]

    The Energy Efficiency and Renewable Energy’s Advanced Manufacturing Office will hold a Peer Review of its Research and Development Projects, Research and Development Facilities and Analysis...

  17. Energy Use in Manufacturing

    Reports and Publications

    2006-01-01

    This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

  18. Manufacturing Day 2015

    Energy.gov [DOE]

    All over the country, manufacturing companies and other organizations are preparing to host an anticipated 400,000 people who want to experience U.S. manufacturing up close and in person. On...

  19. Fuel Cell Manufacturing: American Energy and Manufacturing Competitive...

    Energy.gov [DOE] (indexed site)

    Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013. Fuel Cell Manufacturing (2.61 MB) ...

  20. NREL: Innovation Impact - Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Manufacturing Menu Home Home Solar Solar Wind Wind Analysis Analysis Bioenergy Bioenergy Buildings Buildings Transportation Transportation Manufacturing Manufacturing Energy Systems Integration Energy Systems Integration Increasing U.S. Market Share in Solar Photovoltaic Manufacturing Close From 2000 to 2010, global shipments of solar cells and modules grew 53%, a wave that China and Taiwan rode to increase their combined market share from less than 2% to 54%. Meanwhile, U.S. market share

  1. Manufacturing Innovation Topics Workshop

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Advanced Manufacturing Office (AMO) and the Office of the Secretary of Defense Manufacturing Technology Program (OSD ManTech) will host a workshop to discuss AMO's recent Request for Information (RFI) on Clean Energy Manufacturing Topic Areas as well as the recent areas of interest announced by OSD ManTech for a new Manufacturing Innovation Institute on October 8-9, 2014 in Fort Worth, TX.

  2. Brighter Future for Kentucky Manufacturing Plants | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Brighter Future for Kentucky Manufacturing Plants Brighter Future for Kentucky Manufacturing Plants May 28, 2010 - 3:04pm Addthis Montaplast North America, Inc. is replacing almost 1,200 halide lights with high-efficiency fluorescent fixtures at its Frankfort, KY, facility. | Photo Courtesy of Montaplast | Montaplast North America, Inc. is replacing almost 1,200 halide lights with high-efficiency fluorescent fixtures at its Frankfort, KY, facility. | Photo Courtesy of Montaplast | Stephen Graff

  3. Additive Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Additive Manufacturing 1 Technology Assessment 2 1. Contents 3 1. Introduction to the Technology/System ............................................................................................... 2 4 1.1 Introduction to Additive Manufacturing ....................................................................................... 2 5 1.2 Additive Manufacturing Processes ............................................................................................... 2 6 1.3 Benefits of Additive

  4. Advanced Manufacturing Office Update, January 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    January 2015 Advanced Manufacturing Office Update, January 2015 January 26, 2015 - 2:00pm Addthis In This Issue Featured Articles Expert Panel Releases Final Report on Strengthening Advanced Manufacturing in America 3D Printed Shelby Cobra Demonstrates Further Advances in Additive Manufacturing Partners in the Spotlight Legrand Energy Marathon Leads to Big Savings Better Plants Welcomes First Five Wastewater Treatment Partners Third Volvo Facility Certified to Superior Energy Performance Honda

  5. Manufacturing Impacts Through Energy and Commerce (MITEC) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Manufacturing Impacts Through Energy and Commerce (MITEC) The Department of Energy (DOE) and Department of Commerce (DOC) are committed to strengthening U.S. manufacturing to foster innovation, boost the economy, and create a cleaner and more prosperous future. Under the Clean Energy Manufacturing Initiative, DOE has aligned resources to invest in technology research and development, new innovation models, technical assistance, and the shared technical facilities that help transition

  6. New Investment in Energy-Efficient Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Investment in Energy-Efficient Manufacturing New Investment in Energy-Efficient Manufacturing March 26, 2013 - 11:30am Addthis The Energy Department is supporting new research and development projects that focus on reducing energy use and costs for U.S. manufacturers. One project is expected to dramatically reduce the cost and lower the energy needed to produce aircrafts. | Photo courtesy of ARM Climate Research Facility. The Energy Department is supporting new research and development projects

  7. Manufacturing Fuel Cell Manhattan Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    This document communicates the major fuel cell manufacturing cost drivers, gaps, and industry best practices, as well as recommends manufacturing projects to advance fuel cell manufacturing.

  8. EERE Success Story-BASF Catalysts Opens Cathode Production Facility |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy BASF Catalysts Opens Cathode Production Facility EERE Success Story-BASF Catalysts Opens Cathode Production Facility March 5, 2015 - 6:27pm Addthis BASF Catalysts, a battery component manufacturer, is running the largest cathode materials manufacturing facility in the country with support from EERE's Vehicle Technologies Office (VTO). The factory was supported by a $25 million American Recovery and Reinvestment Act project. Located in Elyria, Ohio, the facility at full

  9. Facility Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-03-01

    This standard, DOE-STD-1063, Facility Representatives, defines the duties, responsibilities and qualifications for Department of Energy (DOE) Facility Representatives, based on facility hazard classification; risks to workers, the public, and the environment; and the operational activity level. This standard provides the guidance necessary to ensure that DOE’s hazardous nuclear and non-nuclear facilities have sufficient staffing of technically qualified facility representatives (FRs) to provide day-to-day oversight of contractor operations.

  10. Fuel Cell Manufacturing: American Energy and Manufacturing Competitiveness Summit

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation on fuel cell manufacturing by Sunita Satyapal at the American Energy and Manufacturing Competitiveness Summit on December 12, 2013.

  11. The Advanced Manufacturing Partnership and the Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    National Program Office | Department of Energy The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office The Advanced Manufacturing Partnership and the Advanced Manufacturing National Program Office This presentation describes the Advanced Manufacturing Partnership from its beginning as a recommendation of the President's Council of Advisers on Science and Technology to its development and organization. The Advanced Manufacturing Partnership and the

  12. Expanded North Carolina Lithium Facility Opens, Boosting U.S. Production of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    a Key Manufacturing Material | Department of Energy North Carolina Lithium Facility Opens, Boosting U.S. Production of a Key Manufacturing Material Expanded North Carolina Lithium Facility Opens, Boosting U.S. Production of a Key Manufacturing Material June 29, 2012 - 12:28pm Addthis News Media Contact (202) 586-4940 WASHINGTON - Today, U.S. Energy Secretary Steven Chu recognized the opening of Rockwood Lithium's expanded manufacturing facility in Kings Mountain, North Carolina. Rockwood is

  13. Materials Engineering Research Facility | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Materials Engineering Research Facility Argonne's new Materials Engineering Research Facility (MERF) supports the laboratory's Advanced Battery Materials Synthesis and Manufacturing R&D Program. The MERF is enabling the development of manufacturing processes for producing advanced battery materials in sufficient quantity for industrial testing. The research conducted in this program is known as process scale-up. Scale-up R&D involves taking a laboratory-developed material and developing

  14. Roll to Roll Manufacturing

    SciTech Connect

    Daniel, Claus

    2015-06-09

    ORNL researchers are developing roll to roll technologies for manufacturing, automotive, and clean energy applications in collaboration with industry partners such as Eastman Kodak.

  15. Manufacturing R&D

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    processes and reduce the cost of manufacturing components and systems for hydrogen production and delivery, hydrogen storage, and fuel cells for transportation, stationary, and ...

  16. Manufacturing | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in the production of clean energy technologies like electric vehicles, LED bulbs and solar panels. The Department is also working with manufacturers to increase their energy...

  17. Additive Manufacturing: Going Mainstream

    Office of Energy Efficiency and Renewable Energy (EERE)

    Additive manufacturing, or 3D printing, is receiving attention from media, investment communities and governments around the world transforming it from obscurity to something to be talked about.

  18. ORISE: Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ORISE Facilities Unique laboratories and training centers among the assets managed on behalf of the U.S. Department of Energy The Oak Ridge Institute for Science and Education (ORISE) is home to a number of on- and off-site facilities that support the U.S. Department of Energy's (DOE) science education and research mission. From on-site medical laboratories to radiation emergency medicine training facilities, ORISE facilities are helping to address national needs in the following areas:

  19. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1996-10-24

    Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation.

  20. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1995-11-16

    Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation.

  1. Industrial Facility Combustion Energy Use

    DOE Data Explorer

    McMillan, Colin

    2016-08-01

    Facility-level industrial combustion energy use is calculated from greenhouse gas emissions data reported by large emitters (>25,000 metric tons CO2e per year) under the U.S. EPA's Greenhouse Gas Reporting Program (GHGRP, https://www.epa.gov/ghgreporting). The calculation applies EPA default emissions factors to reported fuel use by fuel type. Additional facility information is included with calculated combustion energy values, such as industry type (six-digit NAICS code), location (lat, long, zip code, county, and state), combustion unit type, and combustion unit name. Further identification of combustion energy use is provided by calculating energy end use (e.g., conventional boiler use, co-generation/CHP use, process heating, other facility support) by manufacturing NAICS code. Manufacturing facilities are matched by their NAICS code and reported fuel type with the proportion of combustion fuel energy for each end use category identified in the 2010 Energy Information Administration Manufacturing Energy Consumption Survey (MECS, http://www.eia.gov/consumption/manufacturing/data/2010/). MECS data are adjusted to account for data that were withheld or whose end use was unspecified following the procedure described in Fox, Don B., Daniel Sutter, and Jefferson W. Tester. 2011. The Thermal Spectrum of Low-Temperature Energy Use in the United States, NY: Cornell Energy Institute.

  2. Clean Energy Manufacturing Initiative

    SciTech Connect

    2013-04-01

    The initiative will strategically focus and rally EERE’s clean energy technology offices and Advanced Manufacturing Office around the urgent competitive opportunity for the United States to be the leader in the clean energy manufacturing industries and jobs of today and tomorrow.

  3. Manufacturing Innovation in the DOE

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Innovation in the DOE January 13, 2014 Mark Johnson Director Advanced Manufacturing Office manufacturing.energy.gov Advanced Manufacturing Office (AMO) manufacturing.energy.gov 2 What is Advanced Manufacturing? A family of activities that: * Depend on the use and coordination of information, automation, computation, software, sensing, and networking; and/or * Make use of cutting edge materials and emerging capabilities. Advanced Manufacturing involves both: * New ways to

  4. Wheelabrator Millbury Facility Biomass Facility | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Facility Facility Wheelabrator Millbury Facility Sector Biomass Facility Type Municipal Solid Waste Location Worcester County, Massachusetts Coordinates 42.4096528, -71.8571331...

  5. Evaluation of advanced polymers for additive manufacturing

    SciTech Connect

    Rios, Orlando; Morrison, Crystal

    2015-09-01

    The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The PPG-ORNL study successfully demonstrated that polymeric coatings formulations may overcome many limitations of common thermoplastics used in additive manufacturing (AM), allow lightweight nozzle design for material deposition and increase build rate. The materials effort focused on layer-by-layer deposition of coatings with each layer fusing together. The combination of materials and deposition results in an additively manufactured build that has sufficient mechanical properties to bear the load of additional layers, yet is capable of bonding across the z-layers to improve build direction strength. The formulation properties were tuned to enable a novel, high-throughput deposition method that is highly scalable, compatible with high loading of reinforcing fillers, and is inherently low-cost.

  6. Manufactured caverns in carbonate rock

    DOEpatents

    Bruce, David A.; Falta, Ronald W.; Castle, James W.; Murdoch, Lawrence C.

    2007-01-02

    Disclosed is a process for manufacturing underground caverns suitable in one embodiment for storage of large volumes of gaseous or liquid materials. The method is an acid dissolution process that can be utilized to form caverns in carbonate rock formations. The caverns can be used to store large quantities of materials near transportation facilities or destination markets. The caverns can be used for storage of materials including fossil fuels, such as natural gas, refined products formed from fossil fuels, or waste materials, such as hazardous waste materials. The caverns can also be utilized for applications involving human access such as recreation or research. The method can also be utilized to form calcium chloride as a by-product of the cavern formation process.

  7. Advanced Vehicles Manufacturing Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects Advanced Vehicles Manufacturing Projects DOE-LPO_ATVM-Economic-Growth_Thumbnail.png DRIVING ECONOMIC GROWTH: ADVANCED TECHNOLOGY VEHICLES

  8. Optimizing Electric Motor Systems at a Corporate Campus Facility |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Electric Motor Systems at a Corporate Campus Facility Optimizing Electric Motor Systems at a Corporate Campus Facility Minnesota Mining and Manufacturing (3M) conducted an in-house motor system performance optimization project. This four-page case study describes their experience. Optimizing Electric Motor Systems at a Corporate Campus Facility (May 2002) (191.7 KB) More Documents & Publications Metal and Glass Manufacturers Reduce Costs by Increasing Energy

  9. Facility Representatives

    Energy Saver

    Program Manager Office of the Departmental Representative to the Defense Nuclear Facilities Safety Board (DOE DR-1) DOE Headquarters, Forrestal Building 1000 Independence ...

  10. Beamlines & Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Imaging Group: Beamlines The X-ray Micrscopy and Imaging Group operates several beamlines and facilities. The bending magnet beamline (2-BM) entertaines 2 general user programs in...

  11. Advanced Manufacture of Reflectors

    SciTech Connect

    Angel, Roger

    2014-12-17

    The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors <1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants. During the first year a custom batch furnace was built to develop the method with high power radiative heating to simulate transfer of glass into a hot slumping zone in a production line. To preserve the original high polish of the float glass on both front and back surfaces, as required for a second surface mirror, the mold surface is machined to the required shape as grooves which intersect the glass at cusps, reducing the mold contact area to significantly less than 1%. The mold surface is gold-plated to reflect thermal radiation. Optical metrology of glass replicas made with the system has been carried out with a novel, custom-built test system. This test provides collimated, vertically-oriented parallel beams from a linear array of co-aligned lasers translated in a perpendicular direction across the reflector. Deviations of

  12. 48C Phase II Advanced Energy Manufacturing Tax Credit Program Selections |

    Energy.gov [DOE] (indexed site)

    Department of Energy Departments of Energy and the Treasury worked in partnership to develop, launch, and award the funds for 48C Advanced Energy Manufacturing Tax Credit program. The Advanced Energy Manufacturing Tax Credit authorized Treasury to provide developers with an investment tax credit of 30 percent for the manufacture of particular types of energy equipment. Funded at $2.3 billion, the tax credit was made available to 183 domestic clean energy manufacturing facilities during Phase

  13. Renewable Energy Manufacturing Program

    Energy.gov [DOE]

    Note: The initial application deadline for the Renewable Energy Manufacturing Program is June 30, 2016. Applications will be accepted following that date only if there are remaining funds available...

  14. Hydroprocessing catalyst manufacture

    SciTech Connect

    Lostaglio, V.J.; Carruthers, J.D.

    1985-01-01

    Hydroprocessing catalysts for the oil-refining industry have undergone significant improvements since the oil shortages of the late 1970's. Spurred by the need for refiners to process heavy, sour feeds, catalyst manufacturers have developed technology to meet these changing demands. Current manufacturing techniques in the production of substrate and final catalyst are reviewed. New approach to the production of resid hydrotreatment catalysts are considered.

  15. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2005-12-22

    This Order establishes facility and programmatic safety requirements for Department of Energy facilities, which includes nuclear and explosives safety design criteria, fire protection, criticality safety, natural phenomena hazards mitigation, and the System Engineer Program. Cancels DOE O 420.1A. DOE O 420.1B Chg 1 issued 4-19-10.

  16. Facility Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2006-04-06

    REPLACED BY DOE-STD-1063 | SUPERSEDING DOE-STD-1063-2000 (MARCH 2000) The purpose of the DOE Facility Representative Program is to ensure that competent DOE staff personnel are assigned to oversee the day-to-day contractor operations at DOE’s hazardous nuclear and non-nuclear facilities.

  17. Advanced Materials Manufacturing (AMM) Session

    Energy.gov [DOE] (indexed site)

    ... Advanced Manufacturing Office (AMO) manufacturing.energy.gov 12 An AMM InstituteConsortium Approach Offers... ComputationalExperimentalBig Data Synergies: The AMM ...

  18. Laser Manufacturing | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Home > Impact > Advanced Laser Manufacturing Tools Deliver Higher Performance Click to ... Advanced Laser Manufacturing Tools Deliver Higher Performance In a research lab looking ...

  19. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    (MECS) > MECS 1994 Combined Consumption and Fuel Switching Manufacturing Energy Consumption Survey 1994 (Combined Consumption and Fuel Switching) Manufacturing Energy Consumption...

  20. Innovative Manufacturing Initiative Recognition Day

    Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers...

  1. KCNSC expands manufacturing capacity to support mission | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) KCNSC expands manufacturing capacity to support mission Tuesday, August 2, 2016 - 11:39am On hand to open the new manufacturing space were, from left, NNSA Associate Administrator for Safety, Infrastructure and Operations Jim McConnell; Mark Holecek, manager of NNSA's Kansas City Field Office; and NNSA Director of Infrastructure Operations & Modernization Robert Haldeman. The Kansas City National Security Campus celebrated another facility milestone on

  2. Evaluation of Additive Manufacturing for Composite Part Molds

    SciTech Connect

    Duty, Chad E.; Springfield, Robert M.

    2015-02-01

    The ORNL Manufacturing Demonstration Facility (MDF) collaborated with Tru-Design to test the quality and durability of molds used for making fiber reinforced composites using additive manufacturing. The partners developed surface treatment techniques including epoxy coatings and machining to improve the quality of the surface finish. Test samples made using the printed and surface finished molds demonstrated life spans suitable for one-of-a-kind and low-volume applications, meeting the project objective.

  3. Siting analyses for existing facilities

    SciTech Connect

    Ford, K.; Mannan, M. [RMT/Jones and Neuse, Inc., Austin, TX (United States)

    1996-08-01

    The term {open_quotes}facility siting{close_quotes} refers to the spacial relationships between process units, process equipment within units, and the location of buildings relative to process equipment. Facility siting is an important consideration for the safe operation of manufacturing facilities. Paragraph (d) of the Process Safety Management (PSM) rule (29 CFR 1910.119) requires employers to document the codes and standards used for designing process equipment. This documentation includes facility siting. The regulation also requires employers to document that the design of the facility complies with recognized and generally accepted good engineering practices. In addition, paragraph (e) of the PSM regulation requires that facility siting be evaluated during Process Hazard Analyses. Facility siting issues may also need to be considered in emergency planning and response which are required under paragraph (n) of the PSM rule. This paper will demonstrate, by utilizing an example, one technique for evaluating whether buildings could be affected by a catastrophic incident and for determining if these buildings should be included in the PSM programs developed at the facility such as Process Hazard Analysis and Mechanical Integrity. In addition, this example will illustrate a methodology for determining if the buildings are designed and located in accordance with good engineering practice and industry standards.

  4. Ohio Advanced Energy Manufacturing Center

    SciTech Connect

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    health. To aid the overall advanced energy industry, EWI developed and launched an Ohio chapter of the non-profit Advanced Energy Economy. In this venture, Ohio joins with six other states including Colorado, Connecticut, Illinois, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont to help promote technologies that deliver energy that is affordable, abundant and secure. In a more specific arena, EWI's advanced energy group collaborated with the EWI-run Nuclear Fabrication Consortium to promote the nuclear supply chain. Through this project EWI has helped bring the supply chain up to date for the upcoming period of construction, and assisted them in understanding the demands for the next generation of facilities now being designed. In a more targeted manner, EWI worked with 115 individual advanced energy companies that are attempting to bring new technology to market. First, these interactions helped EWI develop an awareness of issues common to companies in different advanced energy sectors. By identifying and addressing common issues, EWI helps companies bring technology to market sooner and at a lower cost. These visits also helped EWI develop a picture of industry capability. This helped EWI provide companies with contacts that can supply commercial solutions to their new product development challenges. By providing assistance in developing supply chain partnerships, EWI helped companies bring their technology to market faster and at a lower cost than they might have been able to do by themselves. Finally, at the most granular level EWI performed dedicated research and development on new manufacturing processes for advanced energy. During discussions with companies participating in advanced energy markets, several technology issues that cut across market segments were identified. To address some of these issues, three crosscutting technology development projects were initiated and completed with Center support. This included reversible welds for batteries

  5. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-12-04

    The Order establishes facility and programmatic safety requirements for DOE and NNSA for nuclear safety design criteria, fire protection, criticality safety, natural phenomena hazards (NPH) mitigation, and System Engineer Program. This Page Change is limited in scope to changes necessary to invoke DOE-STD-1104, Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Document, and revised DOE-STD-3009-2014, Preparation of Nonreactor Nuclear Facility Documented Safety Analysis as required methods. DOE O 420.1C Chg 1, dated 2-27-15, supersedes DOE O 420.1C.

  6. Gas Utilization Facility Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Gas Utilization Facility Biomass Facility Jump to: navigation, search Name Gas Utilization Facility Biomass Facility Facility Gas Utilization Facility Sector Biomass Facility Type...

  7. Total Energy Facilities Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Facilities Biomass Facility Jump to: navigation, search Name Total Energy Facilities Biomass Facility Facility Total Energy Facilities Sector Biomass Facility Type...

  8. An analysis of buildings-related energy use in manufacturing

    SciTech Connect

    Niefer, M.J.; Ashton, W.B.

    1997-04-01

    This report presents research by the Pacific Northwest National Laboratory (PNNL) to develop improved estimates of buildings-related energy use in US manufacturing facilities. The research was supported by the Office of Building Technology, State and Community Programs (BTS), Office of Energy Efficiency and Renewable Energy (EERE), US Department of Energy (DOE). The research scope includes only space conditioning and lighting end uses. In addition, this study also estimates the energy savings potential for application of selected commercial buildings technologies being developed by the BTS office to manufacturing and other industrial process facilities. 17 refs., 2 figs., 19 tabs.

  9. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2002-05-20

    To establish facility safety requirements for the Department of Energy, including National Nuclear Security Administration. Cancels DOE O 420.1. Canceled by DOE O 420.1B.

  10. Guides to pollution prevention: The paint-manufacturing industry

    SciTech Connect

    Not Available

    1990-06-01

    Paint manufacturing facilities generate large quantities of both hazardous and nonhazardous wastes. These wastes are: equipment cleaning wastewater and waste solvent, filter cartridges, off-spec paint, spills, leftover containers; and pigment dusts from air pollution control equipment. Reducing the generation of these wastes at the source, or recycling the wastes on- or off-site, will benefit paint manufacturers by reducing raw material needs, reducing disposal costs; and lowering the liabilities associated with hazardous waste disposal. The guide provides an overview of the paint manufacturing processes and operations that generate waste and presents options for minimizing the waste generation through source reduction or recycling.

  11. Department of Energy Offers Support for an Oregon Solar Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project | Department of Energy an Oregon Solar Manufacturing Project Department of Energy Offers Support for an Oregon Solar Manufacturing Project February 17, 2011 - 12:00am Addthis Washington D.C. --- U.S. Energy Secretary Steven Chu today announced the offer of a conditional commitment to SoloPower, Inc. for a $197 million loan guarantee to support the retrofit of an existing building and installation of additional equipment to operate a thin-film solar panel manufacturing facility in

  12. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2005-12-22

    The order establishes facility and programmatic safety requirements for nuclear and explosives safety design criteria, fire protection, criticality safety, natural phenomena hazards (NPH) mitigation, and the System Engineer Program.Chg 1 incorporates the use of DOE-STD-1189-2008, Integration of Safety into the Design Process, mandatory for Hazard Category 1, 2 and 3 nuclear facilities. Cancels DOE O 420.1A.

  13. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2013-06-21

    DOE-STD-1104 contains the Department's method and criteria for reviewing and approving nuclear facility's documented safety analysis (DSA). This review and approval formally document the basis for DOE, concluding that a facility can be operated safely in a manner that adequately protects workers, the public, and the environment. Therefore, it is appropriate to formally require implementation of the review methodology and criteria contained in DOE-STD-1104.

  14. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2000-11-20

    The objective of this Order is to establish facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation. The Order has Change 1 dated 11-16-95, Change 2 dated 10-24-96, and the latest Change 3 dated 11-22-00 incorporated. The latest change satisfies a commitment made to the Defense Nuclear Facilities Safety Board (DNFSB) in response to DNFSB recommendation 97-2, Criticality Safety.

  15. Photovoltaic manufacturing technology

    SciTech Connect

    Wohlgemuth, J.H.; Whitehouse, D.; Wiedeman, S.; Catalano, A.W.; Oswald, R. )

    1991-12-01

    This report identifies steps leading to manufacturing large volumes of low-cost, large-area photovoltaic (PV) modules. Both crystalline silicon and amorphous silicon technologies were studied. Cost reductions for each step were estimated and compared to Solarex Corporation's manufacturing costs. A cost model, a simple version of the SAMICS methodology developed by the Jet Propulsion Laboratory (JPL), projected PV selling prices. Actual costs of materials, labor, product yield, etc., were used in the cost model. The JPL cost model compared potential ways of lowering costs. Solarex identified the most difficult technical challenges that, if overcome, would reduce costs. Preliminary research plans were developed to solve the technical problems. 13 refs.

  16. Advanced Manufacture of Reflectors

    Energy.gov [DOE]

    The Advance Manufacture of Reflectors fact sheet describes a SunShot Initiative project being conducted research team led by the University of Arizona, which is working to develop a novel method for shaping float glass. The technique developed by this research team can drastically reduce the time required for the shaping step. By enabling mass production of solar concentrating mirrors at high speed, this project should lead to improved performance and as much as a 40% reduction in manufacturing costs for reflectors made in very high volume.

  17. Working with SRNL - Our Facilities - Glovebox Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    SRNL Our Facilities - Glovebox Facilities Govebox Facilities are sealed, protectively-lined compartments with attached gloves, allowing workers to safely handle dangerous materials...

  18. Manufacturing Fuel Cell Manhattan Project

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to DOE Fuel Cell Manufacturing Workshop 2011 John Christensen, PE NREL Consultant DOE Fuel Cell Market Transformation Support August 11, 2011 Manufacturing Fuel Cell Manhattan Project √ Identify manufacturing cost drivers to achieve affordability √ Identify best practices in fuel cell manufacturing technology √ Identify manufacturing technology gaps √ Identify FC projects to address these gaps MFCMP Objectives Completed Final Report due out Nov 2010 B2PCOE Montana Tech SME's Industry

  19. SLAC Accelerator Test Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    FACET & TF Careers & Education Archived FACET User Facility Quick Launch About FACET & Test Facilities Expand About FACET & Test Facilities FACET & Test Facilities User Portal...

  20. Drug development and manufacturing

    DOEpatents

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  1. EPAct at One Event - Clipper Wind Manufacturing Facility | Department...

    Office of Environmental Management (EM)

    ... Second, we must increase efficiency and production of all conventional sources of energy and renewables like solar, wind, hydrogen and biofuels including biodiesel and eventually ...

  2. Celgard US Manufacturing Facilities Initiative for Lithium-ion...

    Energy.gov [DOE] (indexed site)

    2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt009esrumierz2012

  3. Celgard US Manufacturing Facilities Initiative for Lithium-ion...

    Energy.gov [DOE] (indexed site)

    1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon arravt009esrumierz2011

  4. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Energy.gov [DOE] (indexed site)

    2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt028apeboan2012

  5. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon arravt028apeboan2011

  6. Celgard US Manufacturing Facilities Initiative for Lithium-ion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon esarravt009rumierz2010p.pdf More...

  7. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon apearravt028boan2010...

  8. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  9. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles

    Energy.gov [DOE]

    2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  10. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  11. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles

    Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  12. Bio-Manufacturing: A Strategic clean energy manufacturing opportunity

    Energy.gov [DOE]

    Breakout Session 1: New Developments and Hot Topics Session 1-A: Biomass and the U.S. Competitive Advantages for Manufacturing Clean Energy Products Libby Wayman, Director, EERE Clean Energy Manufacturing Initiative

  13. New Request for Information (RFI) on Clean Energy Manufacturing Topic Areas

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Advanced Manufacturing Office (AMO) seeks information on mid-Technology Readiness Level (TRL) research and development (R&D) needs, market challenges, supply chain challenges, and shared facility needs for clean energy manufacturing. This new Request for Information (RFI) is a follow-on to a recently completed RFI broadly covering advanced manufacturing. AMO would now like to know more about the challenges associated with advanced manufacturing technology which potentially could be overcome by pre-competitive collaboration as part of a Clean Energy Manufacturing Innovation Institute.

  14. Statement by Energy Secretary Steven Chu on New Clean Energy Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Facility in Upstate New York | Department of Energy New Clean Energy Manufacturing Facility in Upstate New York Statement by Energy Secretary Steven Chu on New Clean Energy Manufacturing Facility in Upstate New York October 14, 2010 - 12:00am Addthis WASHINGTON, D.C. - U.S. Energy Secretary Steven Chu issued the following statement on today's announcement by Universal Display Corporation (UDC) that the company has selected Canandaigua, New York for the site of a new clean energy facility to

  15. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1995-10-13

    Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation. Cancels DOE 5480.7A, DOE 5480.24, DOE 5480.28 and Division 13 of DOE 6430.1A. Canceled by DOE O 420.1A.

  16. Facility Safety

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-12-04

    The Order establishes facility and programmatic safety requirements for DOE and NNSA for nuclear safety design criteria, fire protection, criticality safety, natural phenomena hazards (NPH) mitigation, and System Engineer Program. Cancels DOE O 420.1B, DOE G 420.1-2 and DOE G 420.1-3.

  17. Metro Methane Recovery Facility Biomass Facility | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Methane Recovery Facility Biomass Facility Jump to: navigation, search Name Metro Methane Recovery Facility Biomass Facility Facility Metro Methane Recovery Facility Sector Biomass...

  18. Contribution to Nanotechnology Manufacturing

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    shares Nano 50 award for directed assembly September 3, 2008 Contribution to Nanotechnology Manufacturing LOS ALAMOS, New Mexico, September 3, 2008-A team of scientists spanning three institutions, including Los Alamos National Laboratory, has discovered a more efficient way of fusing charge-carrying electrical contacts to tiny "nanowires" of silicon to create the nanotechnology at the heart of potential future advances in modern electronics, sensing, and energy collection. Nanotech

  19. Flexibility in Biofuel Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Flexibility in Biofuel Manufacturing Dan Gaspar Sustainable Transportation Summit July 12, 2016 Fuel selection overview If we identify the critical fuel properties and target values that maximize efficiency and emissions performance for a given engine architecture, then fuels that have properties with those values (regardless of chemical composition) will provide comparable performance Governing Co-Optima hypotheses: There are engine architectures and strategies that provide higher thermodynamic

  20. National Electrical Manufacturers Association

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    July 24, 2014 VIA EMAIL TO: Regulatory.Review@hq.doe.gov Steven Croley, General Counsel Office of the General Counsel U.S. Department of Energy 1000 Independence Avenue SW., Washington, DC 20585 NEMA Comments on DOE Reducing Regulatory Burden RFI 79 Fed.Reg. 28518 (July 3, 2014) Dear Mr. Croley, The National Electrical Manufacturers Association (NEMA) thanks you for the opportunity to provide comments on the Department of Energy's efforts to make its regulatory program more effective and less

  1. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    SciTech Connect

    Not Available

    2011-07-01

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  2. Energy-Saving Opportunities for Manufacturing Enterprises in China (International Brochure)

    SciTech Connect

    Not Available

    2010-10-01

    This English/Chinese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing facilities reduce industrial energy intensity.

  3. Energy-Saving Opportunities for Manufacturing Companies, (English/Russian Fact Sheet) (Revised)

    SciTech Connect

    Not Available

    2011-07-01

    This English/Russian brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  4. Energy-Saving Opportunities for Manufacturing Companies, International Fact Sheet (Spanish)

    SciTech Connect

    Not Available

    2010-08-01

    This English/Spanish fact sheet describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  5. Manufactured Homes Tool

    Energy Science and Technology Software Center

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  6. Fuel Oil Use in Manufacturing

    Energy Information Administration (EIA) (indexed site)

    logo Return to: Manufacturing Home Page Fuel Oil Facts Oil Price Effect Fuel Switching Actual Fuel Switching Storage Capacity Fuel Oil Use in Manufacturing Why Look at Fuel Oil?...

  7. Additive Manufacturing for Fuel Cells

    Energy.gov [DOE]

    Blake Marshall, AMO's lead for Additive Manufacturing Technologies, will provide an overview of current R&D activities in additive manufacturing and its application to fuel cell prototyping and...

  8. NREL: Energy Analysis - Manufacturing Analysis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Recent Publications "Economic Measurements of Polysilicon for the Photovoltaic Industry: Market Competition and Manufacturing Competitiveness" IEEE Journal of Photovoltaics Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry Economic Development Impact of 1,000 MW of Wind Energy in Texas Manufacturing Analysis With world-class manufacturing analysis capabilities, NREL analyzes clean energy industry trends; cost, price, and performance trends; market and

  9. ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Use of Nanomaterials, January 2011 ITP Nanomanufacturing: Nanomanufacturing Portfolio: Manufacturing Processes and Applications to Accelerate Commercial Use of Nanomaterials, ...

  10. Energy 101: Clean Energy Manufacturing

    SciTech Connect

    2015-07-09

    Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Watch this video to learn more about this exciting movement and to see some of these innovations in action.

  11. Electrolyzer Manufacturing Progress and Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    * Proton Commercialization Status: PEM Electrolysis * Current Manufacturing Limitations: ... service * Broad understanding of PEM Electrolysis systems and markets 4 Proton ...

  12. Energy 101: Clean Energy Manufacturing

    Energy.gov [DOE]

    Most of us have a basic understanding of manufacturing. It's how we convert raw materials, components, and parts into finished goods that meet our essential needs and make our lives easier. But what about clean energy manufacturing? Clean energy and advanced manufacturing have the potential to rejuvenate the U.S. manufacturing industry and open pathways to increased American competitiveness. Watch this video to learn more about this exciting movement and to see some of these innovations in action.

  13. Develop and Manufacture an airlock sliding tray

    SciTech Connect

    Lawton, Cindy M.

    2014-02-26

    Objective: The goal of this project is to continue to develop an airlock sliding tray and then partner with an industrial manufacturing company for production. The sliding tray will be easily installed into and removed from most glovebox airlocks in a few minutes. Technical Approach: A prototype of a sliding tray has been developed and tested in the LANL cold lab and 35 trays are presently being built for the plutonium facility (PF-4). The current, recently approved design works for a 14-inch diameter round airlock and has a tray length of approximately 20 inches. The grant will take the already tested and approved round technology and design for the square airlock. These two designs will be suitable for the majority of the existing airlocks in the multitude of DOE facilities. Partnering with an external manufacturer will allow for production of the airlock trays at a much lower cost and increase the availability of the product for all DOE sites. Project duration is estimated to be 12-13 months. Benefits: The purpose of the airlock sliding trays is fourfold: 1) Mitigate risk of rotator cuff injuries, 2) Improve ALARA, 3) Reduce risk of glovebox glove breaches and glove punctures, and 4) Improve worker comfort. I have had the opportunity to visit many other DOE facilities including Savannah, Y-12, ORNL, Sandia, and Livermore for assistance with ergonomic problems and/or injuries. All of these sites would benefit from the airlock sliding tray and I can assume all other DOE facilities with gloveboxes built prior to 1985 could also use the sliding trays.

  14. MECS 2006 - All Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    All Manufacturing MECS 2006 - All Manufacturing Manufacturing Energy and Carbon Footprint - Sector: All Manufacturing (NAICS 31-33) with Total Energy Input, October 2012 (MECS 2006) All available footprints and supporting documents Manufacturing Energy and Carbon Footprint All Manufacturing (NAICS 31-33) (120.28 KB) More Documents & Publications All Manufacturing (2010 MECS) MECS 2006 - Alumina and Aluminum MECS 2006 - Cement

  15. Out of Bounds Additive Manufacturing

    SciTech Connect

    Holshouser, Chris [Lockheed Martin Corporation; Newell, Clint [Lockheed Martin Corporation; Palas, Sid [Lockheed Martin Corporation; Love, Lonnie J [ORNL; Kunc, Vlastimil [ORNL; Lind, Randall F [ORNL; Lloyd, Peter D [ORNL; Rowe, John C [ORNL; Blue, Craig A [ORNL; Duty, Chad E [ORNL; Peter, William H [ORNL; Dehoff, Ryan R [ORNL

    2013-01-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing (AM) system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  16. Out of bounds additive manufacturing

    DOE PAGES [OSTI]

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  17. Recovery Act Helps GE in-source Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Recovery Act Helps GE in-source Manufacturing Recovery Act Helps GE in-source Manufacturing September 30, 2010 - 2:21pm Addthis The Geospring Hybrid Water Heater will be produced at GE's Appliance Park in Louisville. | Photo courtesy of GE The Geospring Hybrid Water Heater will be produced at GE's Appliance Park in Louisville. | Photo courtesy of GE Lindsay Gsell GE has a long history in Louisville, Ky. The company's appliance and lighting facility in Louisville has been manufacturing appliances

  18. Report to the President: Capturing a Domestic Competitive Advantage in Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    REPORT TO THE PRESIDENT CAPTURING A DOMESTIC COMPETITIVE ADVANTAGE IN ADVANCED MANUFACTURING Report of the Advanced Manufacturing Partnership Steering Committee Annex 2: Shared Infrastructure and Facilities Workstream Report Executive Office of the President President's Council of Advisors on Science and Technology JULY 2012 PREFACE In June 2011, the President established the Advanced Manufacturing Partnership (AMP), which is led by a Steering Committee that operates within the framework of the

  19. Energy Department's High Performance Computing for Manufacturing Program Seeks to Fund New Industry Proposals

    Energy.gov [DOE]

    The U.S. Department of Energy (DOE) is seeking concept proposals from qualified U.S. manufacturers to participate in short-term, collaborative projects. Selectees will be given access to High Performance Computing facilities and will work with experienced DOE National Laboratories staff in addressing challenges in U.S. manufacturing.

  20. Mobile Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    govSitesMobile Facility AMF Information Science Architecture Baseline Instruments AMF1 AMF2 AMF3 MAOS AMF Fact Sheet Images Contacts AMF Deployments McMurdo Station, Antarctica, 2015-2016 Pearl Harbor, Hawaii, to San Francisco, California, 2015 Hyytiälä, Finland, 2014 Manacapuru, Brazil, 2014 Oliktok Point, Alaska, 2013 Los Angeles, California, to Honolulu, Hawaii, 2012 Cape Cod, Massachusetts, 2012 Gan Island, Maldives, 2011 Ganges Valley, India, 2011 Steamboat Springs, Colorado, 2010

  1. Innovative Manufacturing Initiative Recognition Day, Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry

  2. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projection...

    Energy Information Administration (EIA) (indexed site)

    Residential - RECS Transportation DOE Uses MECS Data Manufacturing Energy and Carbon Footprints Associated Analysis Manufacturing Energy Sankey Diagrams Manufacturing Energy Flows ...

  3. GE's Digital Marketplace to Revolutionize Manufacturing | GE...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Manufacturing Commons" - a global ecosystem for manufacturing businesses The Commons ... The project aims to build an expansive manufacturing ecosystem, with the goal of having ...

  4. Manufacturing Energy Consumption Survey (MECS) - Analysis & Projection...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    That increase in supply has in turn lowered the price of natural gas to manufacturers Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use ...

  5. Additive Manufacturing: Pursuing the Promise | Department of...

    Energy.gov [DOE] (indexed site)

    Fact sheet overviewing additive manufacturing techniques that are projected to exert a profound impact on manufacturing. Additive Manufacturing: Pursuing the Promise More Documents...

  6. FHP Manufacturing Company Geothermal | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    FHP Manufacturing Company Geothermal Jump to: navigation, search Name: FHP Manufacturing Company: Geothermal Place: Florida Sector: Geothermal energy Product: FHP Manufacturing...

  7. Teksun PV Manufacturing Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Teksun PV Manufacturing Inc Jump to: navigation, search Logo: Teksun PV Manufacturing Inc Name: Teksun PV Manufacturing Inc Address: 401 Congress Ave Place: Austin, Texas Zip:...

  8. Solar Manufacturing Technology | Department of Energy

    Office of Environmental Management (EM)

    Technology to Market Solar Manufacturing Technology Solar Manufacturing Technology The SunShot Solar Manufacturing Technology (SolarMat) program funds the development of ...

  9. WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW WORKSHOP: SUSTAINABILITY IN MANUFACTURING AGENDA AND OVERVIEW PDF icon Sustainable Manufacturing Workshop Agenda.pdf ...

  10. About the Clean Energy Manufacturing Initiative | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    About the Clean Energy Manufacturing Initiative About the Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative (CEMI) is a U.S. Department of Energy ...

  11. clean energy manufacturing | netl.doe.gov

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy ...

  12. FDA Exemption Letter, 78EL-01DOE by LSSG for GOCG Facilities

    Energy.gov [DOE]

    Food and Drug Administration response to Department of Energy's request for clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility may be considered a laser manufacturer and subject to FDA laser manufacturer requirements and other points of interpretation of the FDA Exemption Letter, 78EL-01DOE (DOE exemption or exemption) by the LSSG for GOCG facilities.

  13. Manufacturing High Temperature Systems

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing and Scale Up Challenges Joseph Hartvigsen Ceramatec, Inc. National Renewable Energy Laboratory Golden, CO February 28, 2014 Antipode Assertions * Electric power generation is not the limitation - To misquote Jay Leno "Use all you want, we'll make more" - http://atomicinsights.com/2013/02/use-all-the-electricity-you-want-well-make-more.html * High electric costs come from working the demand curve from below rather than above * "Grid Storage" is a misleading

  14. Research Facilities | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research Facilities Our state-of-the-art facilities are available to industry entrepreneurs, engineers, scientists, and universities for researching and developing their energy technologies. Our researchers and technicians who operate these labs and facilities are ready to work with you and share their expertise. Alphabetical Listings Laboratories Test and User Facilities Popular Facilities Energy Systems Integration Facility Integrated Biorefinery Research Facility Process Development

  15. Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

    SciTech Connect

    Azimi, S.A.; Conrad, J.L.; Reed, J.E.

    1985-03-01

    Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

  16. ARM - Guest Instrument Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PlainsGuest Instrument Facility SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Summer Training SGP Fact Sheet Images Information for Guest Scientists Contacts Guest Instrument Facility ARM's Guest Instrument Facility at the SGP site near Lamont, Oklahoma. ARM's Guest

  17. NREL: Research Facilities - Webmaster

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Your name: Your email address: Your message: Send Message Printable Version Research Facilities Home Laboratories Test & User Facilities Laboratories & Facilities by Technology...

  18. Facilities | Bioenergy | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities At NREL's state-of-the-art bioenergy research facilities, researchers design ... facility to develop, test, evaluate, and demonstrate bioenergy processes and technologies. ...

  19. Research Facility,

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Delivering the Data As a general condition for use of the ARM Climate Research Facility, users are required to include their data in the ARM Data Archive. All data acquired must be of sufficient quality to be useful and must be documented such that users will be able to clearly understand the meaning and organization of the data. Final, quality-assured data sets are stored in the Data Archive and are freely accessible to the general scientific community. Upon conclusion of the field campaign,

  20. AMO Celebrates Manufacturing Day Across the Country

    Office of Energy Efficiency and Renewable Energy (EERE)

    On October 7, 2016, manufacturers across the country opened their doors and hosted events in honor of Manufacturing Day.  Manufacturing Day is a celebration of modern manufacturing meant to inspire...

  1. Smart Manufacturing Innovation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Smart Manufacturing Innovation Smart Manufacturing Innovation Addthis Find out how advanced technologies developed by our latest institute will make U.S. manufacturing more productive, energy efficient, and competitive. Learn more about advanced manufacturing

  2. Argonne's Materials Engineering Research Facility - Joint Center for

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Storage Research August 8, 2012, Videos Argonne's Materials Engineering Research Facility Argonne's Materials Engineering Research Facility (MERF) enables the development of manufacturing processes for producing advanced battery materials in sufficient quantity for industrial testing. The research conducted in this program is known as process scale-up

  3. Support - Facilities - Radiation Effects Facility / Cyclotron...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    During experiments at the Radiation Effects Facility users are assisted by the experienced ... shops are available to the users of the Radiation Effects Facility for design, ...

  4. Radiation Effects Facility - Facilities - Cyclotron Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Radiation Effects Facility Typical DUT(device under test) set-up at the end of the Radiation Effects beamline. The Radiation Effects Facility is available for commercial, ...

  5. Harrisburg Facility Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    2006 Database Retrieved from "http:en.openei.orgwindex.php?titleHarrisburgFacilityBiomassFacility&oldid397545" Feedback Contact needs updating Image needs updating...

  6. Brookhaven Facility Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    2006 Database Retrieved from "http:en.openei.orgwindex.php?titleBrookhavenFacilityBiomassFacility&oldid397235" Feedback Contact needs updating Image needs updating...

  7. Energy Systems Integration Facility (ESIF): Facility Stewardship...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Systems Integration Facility (ESIF) Facility Stewardship Plan Revision 2.0 ... laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable ...

  8. Oak Ridge Centers for Manufacturing Technology - The Manufacturing...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Manufacturing Skills Campus Another of the inputs came from Garry Whitley, President of the Atomic Trades and Labor Council, since retired. Garry and I have worked together...

  9. Oak Ridge Centers for Manufacturing Technology ? The Manufacturing...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Manufacturing Skills Campus Another of the inputs came from Garry Whitley, President of the Atomic Trades and Labor Council, since retired. Garry and I have worked together...

  10. Understanding Manufacturing Energy and Carbon Footprints, October...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Understanding Manufacturing Energy and Carbon Footprints, October 2012 Understanding Manufacturing Energy and Carbon Footprints, October 2012 understandingenergyfootprints2012.p...

  11. National Electrical Manufacturers Association Comment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Comment National Electrical Manufacturers Association Comment The National Electrical Manufacturers Association (NEMA) appreciates the opportunity to provide the attached comments ...

  12. Nakagawa Electric Machinery Manufacturer | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search Name: Nakagawa Electric Machinery Manufacturer Place: Saku, Nagano, Japan Product: A company engages in electrical equipment manufacture. Coordinates:...

  13. Clean Energy Manufacturing Initiative: Increasing American Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Initiative: Increasing American Competitiveness Through Innovation Clean ... Manufacturing Initiative (CEMI), a collaborative effort between the federal government, ...

  14. Clean Energy Manufacturing Initiative Midwest Regional Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Breakout Session Summary (372.05 KB) More Documents & Publications Fiber Reinforced Polymer Composite Manufacturing Workshop Multimaterial Joining Workshop Manufacturing ...

  15. Semiconductor Manufacturing International Corp SMIC | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Manufacturing International Corp SMIC Jump to: navigation, search Name: Semiconductor Manufacturing International Corp (SMIC) Place: Shanghai, Shanghai Municipality, China Zip:...

  16. Advanced Manufacturing Office (Formerly Industrial Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Office (Formerly Industrial Technologies Program) Advanced Manufacturing Office (Formerly Industrial Technologies Program) Presented at the NREL Hydrogen and Fuel ...

  17. Institute for Advanced Composites Manufacturing Innovation Holds...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Institute for Advanced Composites Manufacturing Innovation Holds Second Membership Meeting Institute for Advanced Composites Manufacturing Innovation Holds Second Membership Meeting ...

  18. Clean Energy Manufacturing Innovation Institute for Composites...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Clean Energy Manufacturing Innovation Institute for Composites Materials and Structures Clean Energy Manufacturing Innovation Institute for Composites Materials and Structures ...

  19. clean energy manufacturing | netl.doe.gov

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Clean Energy Manufacturing Initiative The Clean Energy Manufacturing Initiative is a strategic integration and commitment of manufacturing efforts across the DOE Office of Energy Efficiency & Renewable Energy's (EERE's) clean energy technology offices and Advanced Manufacturing Office, focusing on American competitiveness in clean energy manufacturing. Clean Energy Manufacturing Initiative: http://www1.eere.energy.gov/energymanufacturing

  20. Manufacturing consumption of energy 1994

    SciTech Connect

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  1. Kent County Waste to Energy Facility Biomass Facility | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    County Waste to Energy Facility Biomass Facility Jump to: navigation, search Name Kent County Waste to Energy Facility Biomass Facility Facility Kent County Waste to Energy...

  2. Stockton Regional Water Control Facility Biomass Facility | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Stockton Regional Water Control Facility Biomass Facility Jump to: navigation, search Name Stockton Regional Water Control Facility Biomass Facility Facility Stockton Regional...

  3. Manufacturing consumption of energy 1991

    SciTech Connect

    Not Available

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  4. Revolutionizing Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Revolutionizing Manufacturing Revolutionizing Manufacturing Addthis Saving Energy and Resources 1 of 4 Saving Energy and Resources Thanks to additive manufacturing technology, Oak Ridge National Laboratory was able to fabricate a robotic hand with less energy use and material waste. The novel, lightweight, low-cost fluid powered hand was selected for a 2012 R&D 100 award. | Photo courtesy of Oak Ridge National Laboratory. Partnering with Industry 2 of 4 Partnering with Industry The Energy

  5. Transformational Manufacturing | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Transformational Manufacturing Argonne's new Advanced Battery Materials Synthesis and Manufacturing R&D Program focuses on scalable process R&D to produce advanced battery materials in sufficient quantity for industrial testing. The U.S. manufacturing industry consumes more than 30 quadrillion Btu of energy per year, directly employs about 12 million people and generates another 7 million jobs in related businesses. Argonne is working with industry to develop innovative and

  6. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Clean Energy Manufacturing Initiative (CEMI) is a U.S. Department of Energy (DOE)- wide commitment to innovation and breaking down market barriers in order to enhance U.S. manufacturing competitiveness while advancing the nation's energy goals. As part of its mission, CEMI builds partnerships around strategic priorities to increase U.S. clean energy manufacturing competitiveness. This requires an "all-hands-on-deck" approach that involves the nation's private and public sectors,

  7. Manufacturing the MFTF magnet

    SciTech Connect

    Dalder, E.N.C.; Hinkle, R.E.; Hodges, A.J.

    1980-10-13

    The Mirror Fusion Test Facility (MFTF) is a large mirror program experiment for magnetic fusion energy. It will combine and extend the near-classical plasma confinement achieved in 2XIIB with advanced neutral-beam and magnet technologies. The product of ion density and confinement time will be improved more than an order of magnitude, while the superconducting magnet weight will be extrapolated from 15 tons in Baseball II to 375 tons in MFTF. Recent reactor studies show that the MFTF will traverse much of the distance in magnet technology towards the reactor regime.

  8. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    December 4, 2010 [Facility News] Request for Proposals Now Open Bookmark and Share The ARM Climate Research Facility is now accepting applications for use of the ARM mobile facilities, aerial facility, and fixed sites. Proposals are welcome from all members of the scientific community for conducting field campaigns and scientific research using the ARM Facility. Facility availability is as follows: ARM Mobile Facility 2 (AMF2) available FY2013 ARM Mobile Facility 1 (AMF1) available March 2015

  9. Manufacturing Spotlight: Boosting American Competitiveness

    Energy.gov [DOE]

    Find out how the Energy Department is helping bring new clean energy technologies to the marketplace and make manufacturing processes more energy efficient.

  10. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    the CM, the ASM contains two components. The first component is the mail portion, a probability sample of manufacturing establishments selected from the list of establishments...

  11. The Clean Energy Manufacturing Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    by ensuring critical feedback from the production phase to invention and discovery. Additive manufacturing is just one of several technologies advanced by the Energy...

  12. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    Natural Gas to Residual Fuel Oil, by Industry Group and Selected Industries, 1994 369 Energy Information AdministrationManufacturing Consumption of Energy 1994 SIC Residual...

  13. Solar Thermal Collector Manufacturing Activities

    Annual Energy Outlook

    4 Average thermal performance rating of solar thermal collectors by type shipped in 2009 ... Administration, Form EIA-63A, "Annual Solar Thermal Collector Manufacturers Survey." ...

  14. Solar Thermal Collector Manufacturing Activities

    Annual Energy Outlook

    5 Shipments of complete solar thermal collector systems, 2008 and 2009 Shipment ... Administration, Form EIA-63A, "Annual Solar Thermal Collector Manufacturers Survey."

  15. Geothermal Heat Pump Manufacturing Activities

    Annual Energy Outlook

    8 Geothermal heat pump shipments by origin, 2008 and 2009 (rated capacity in tons) Origin ... Administration (EIA), Form EIA-902, "Annual Geothermal Heat Pump Manufacturers Survey

  16. Geothermal Heat Pump Manufacturing Activities

    Annual Energy Outlook

    0 Geothermal heat pump domestic shipments by customer type, 2008 and 2009 (rated capacity ... Administration (EIA), Form EIA-902, "Annual Geothermal Heat Pump Manufacturers Survey

  17. Geothermal Heat Pump Manufacturing Activities

    Gasoline and Diesel Fuel Update

    1 Geothermal heat pump domestic shipments by sector and model type, 2009 (rated capacity ... Administration (EIA), Form EIA-902, "Annual Geothermal Heat Pump Manufacturers Survey

  18. Geothermal Heat Pump Manufacturing Activities

    Annual Energy Outlook

    Geothermal heat pump shipments by model type, 2000 - 2009 (number of units) ARI-320 ... Administration (EIA), Form EIA-902, "Annual Geothermal Heat Pump Manufacturers Survey."

  19. Geothermal Heat Pump Manufacturing Activities

    Gasoline and Diesel Fuel Update

    Rated capacity of geothermal heat pump shipments by model type, 2000 - 2009 (tons) ARI-320 ... Administration (EIA), Form EIA-902, "Annual Geothermal Heat Pump Manufacturers Survey."

  20. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    Detailed Tables 28 Energy Information AdministrationManufacturing Consumption of Energy 1994 1. In previous MECS, the term "primary energy" was used to denote the "first use" of...

  1. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    energy data used in this report do not reflect adjustments for losses in electricity generation or transmission. 1 The manufacturing sector is composed of establishments classified...

  2. Energy-Efficient Manufactured Homes

    Energy.gov [DOE]

    Like site-built homes, new manufactured homes (formerly known as mobile homes) can be designed for energy efficiency and renewable energy.

  3. Advanced Manufacturing | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The U.S. Department of Energy funds the research, development, and demonstration of highly ... that enable the development and demonstration of advanced manufacturing ...

  4. Manufacturing Fuel Cell Manhattan Project

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Fuel Cell Manhattan Project Presented by the Benchmarking and Best Practices ... in providing valued information on affordable and implementable fuel cell technology. ...

  5. Manufacturing Innovation in the DOE

    Energy.gov [DOE] (indexed site)

    Products Swung to historic deficit, lost 13 of workforce Data Source: http:www.census.govforeign-tradePress-Releaseft900index.html Advanced Manufacturing Office (AMO) ...

  6. Clean Energy Manufacturing: U.S. Competitiveness and State Policy Strategies (Presentation)

    SciTech Connect

    Lantz, E.

    2014-02-01

    The capital intensive nature of clean energy technologies suggests that manufacturing clean energy equipment has the potential to support state and local economic development efforts. However, manufacturing siting decisions tend to be complex and multi-variable decision processes that require in-depth knowledge of specific markets, the logistical requirements of a given technology, and insight into global clean tech trends. This presentation highlights the potential of manufacturing in supporting economic development opportunities while also providing examples of the financial considerations affecting manufacturing facility siting decisions for wind turbine blades and solar PV. The presentation also includes discussion of other more qualitative drivers of facility siting decisions as gleaned from NREL industry interviews and discusses strategies state and local policymakers may employee to bolster their chances of successfully attracting clean energy manufacturers to their localities.

  7. Energy Department Supports Manufacturing Day

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Energy Department’s Office of Energy Efficiency and Renewable Energy (EERE) is supporting Manufacturing Day—a nationwide event that opens the doors of nearly 2000 manufacturing companies to the public—with visits to sites in the Midwest.

  8. Solar Manufacturing Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects Solar Manufacturing Projects SOLAR MANUFACTURING 1 PROJECT in 1 LOCATION 1,000 MW GENERATION CAPACITY 1,927,000 MWh PROJECTED ANNUAL GENERATION * 1,100,000 METRIC TONS OF CO2 EMISSIONS PREVENTED ANNUALLY ALL FIGURES AS OF MARCH 2015 * Calculated using the project's and NREL Technology specific capacity factors. For cases in which NREL's capacity factors

  9. Advanced Manufacturing Office At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ADVANCED MANUFACTURING OFFICE FY 2017 BUDGET AT-A-GLANCE The Advanced Manufacturing Office (AMO) brings together manufacturers, research institutions, suppliers, and universities to investigate manufacturing processes, information, and materials technologies critical to advance domestic manufacturing of clean energy products, and to support energy productivity across the entire manufacturing sector. What We Do The Advanced Manufacturing Offce uses an integrated approach that relies on three

  10. All Manufacturing (2010 MECS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    All Manufacturing (2010 MECS) All Manufacturing (2010 MECS) Manufacturing Energy and Carbon Footprint for All Manufacturing Sector (NAICS 31-33) Energy use data source: 2010 EIA MECS (with adjustments) Footprint Last Revised: June 2015 View footprints for other sectors here. Manufacturing Energy and Carbon Footprint All Manufacturing (111.63 KB) More Documents & Publications Cement (2010 MECS) Chemicals (2010 MECS) Computers, Electronics and Electrical Equipment (2010 MECS) Manufacturing

  11. Manufacturing company faces $8 million penalty for alleged RCRA violations

    SciTech Connect

    1995-03-01

    On October 7, 1994, EPA filed a complaint against Eastman Kodak Company for alleged RCRA violations at Kodak`s manufacturing and hazardous waste treatment, storage, and disposal facilities located in Rochester, New York. A proposed consent decree accompanied the complaint filed in the US District Court for the Western District of New York (United States v. Eastman Kodak Company, Dockett Number: 94-CV-6503T). According to the terms of the proposed consent decree, Kodak is to pay an $8 million civil penalty by implementing six environmental projects. The company must also upgrade its industrial sewer system and bring all operations into compliance with RCRA regulations. This action indicates EPA`s intent to promote waste reduction and pollution prevention in addition to requiring compliance at large, aging manufacturing facilities.

  12. Manufacturing Cost Levelization Model – A User’s Guide

    SciTech Connect

    Morrow, William R.; Shehabi, Arman; Smith, Sarah Josephine

    2015-08-01

    The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modules that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks

  13. Manufacture and Development of Multilayer Diffraction Gratings

    SciTech Connect

    Keck, J.; Oliver, J.B.; Kessler, T.J.; Huang, H.; Barone, J.; Hettrick, J.; Rigatti, A.L.; Hoover, T.; Marshall, K.L.; Schmid, A.W.; Kozlov, A.; Kosc, T.Z.

    2006-03-01

    The OMEGA EP Facility includes two high-energy, short-pulse laser beams that will be focused to high intensity in the OMEGA target chamber, providing backlighting of compressed fusion targets and investigating the fast-ignition concept. To produce 2.6 kJ output energy per beam, developments in grating compressor technology are required. Gold-coated diffraction gratings limit on-target energy because of their low damage fluence. Multilayer dielectric (MLD) gratings have shown promise as high-damage-threshold, high-efficiency diffraction gratings suitable for use in high-energy chirped-pulse amplification. This paper details the manufacture and development of these gratings, including the specifics of the MLD coating, holographic lithography, reactive ion etching, reactive ion-beam cleaning, and wet chemical cleaning.

  14. Coatings and Process Development for Reduced Energy Automotive OEM Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Caroline S. Harris, Ph.D., PPG U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. June 14-15, 2016 Project Objective  Develop coatings, processes and facility design to reduce energy consumption in automotive OEM paint shops  Technical Barriers  Maintaining coating properties at lower temperature cure  Low temperature cross-link chemistries not commercial  Adoption of waterborne technologies and VOC restrictions  Process optimization compatibility

  15. Code verification in Computational Fluid Dynamics: Method of Manufactured

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Solutions | Argonne Leadership Computing Facility Code verification in Computational Fluid Dynamics: Method of Manufactured Solutions Event Sponsor: Mathematics and Computer Science Division LANS Seminar Start Date: Oct 26 2016 - 3:00pm Building/Room: Building 240/Room 1404-1405 Location: Argonne National Laboratory Speaker(s): Oana Marin Speaker(s) Title: Argonne National Laboratory, MCS Host: Paul Hovland Event Website: http://www.mcs.anl.gov/research/LANS/events/listn/ The robustness of a

  16. Clean Energy Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Industrial efficiency and low-cost energy resources are key components to increasing U.S. energy productivity and makes the U.S. manufacturing sector more competitive. Companies find a competitive advantage in implementing efficiency

  17. Advanced Technology Vehicles Manufacturing Incentive Program | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Technology Vehicles Manufacturing Incentive Program Advanced Technology Vehicles Manufacturing Incentive Program A fact sheet detailling the advanced technology vehicles manufacturing incentive program. Advanced Technology Vehicles Manufacturing Incentive Program (1.49 MB) More Documents & Publications Advanced Technology Vehicles Manufacturing Incentive Program MEMA: Comments MEMA: Letter

  18. Manufacturers' View on Benchmarking and Disclosure

    Gasoline and Diesel Fuel Update

    Association of Electrical and Medical Imaging Equipment Manufacturers Manufacturing Solutions for Energy Efficiency in Buildings Patrick Hughes Policy Director, High Performance Buildings National Electrical Manufacturers Association The Association of Electrical and Medical Imaging Equipment Manufacturers What is NEMA? The Association of Electrical Equipment and Medical Imaging Manufacturers Which policies encourage energy efficiency in buildings? Energy Savings Performance Contracts Tax

  19. Sandia National Laboratories: Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities Bioscience Computing and Information Science Electromagnetics Facilities Electromagnetic Environments Simulator (EMES) Mode Stirred Chamber Lightning Facility Electrostatic Discharge (ESD) Laboratory Other Facilities and Capabilities Programs & Capabilities Partnership Opportunities EM News & Reports Contact Information Engineering Science Geoscience Materials Science Nanodevices and Microsystems Radiation Effects and High Energy Density Science Research Facilities

  20. Semantic Web for Manufacturing Web Services

    SciTech Connect

    Kulvatunyou, Boonserm; Ivezic, Nenad

    2002-06-01

    As markets become unexpectedly turbulent with a shortened product life cycle and a power shift towards buyers, the need for methods to rapidly and cost-effectively develop products, production facilities and supporting software is becoming urgent. The use of a virtual enterprise plays a vital role in surviving turbulent markets. However, its success requires reliable and large-scale interoperation among trading partners via a semantic web of trading partners' services whose properties, capabilities, and interfaces are encoded in an unambiguous as well as computer-understandable form. This paper demonstrates a promising approach to integration and interoperation between a design house and a manufacturer by developing semantic web services for business and engineering transactions. To this end, detailed activity and information flow diagrams are developed, in which the two trading partners exchange messages and documents. The properties and capabilities of the manufacturer sites are defined using DARPA Agent Markup Language (DAML) ontology definition language. The prototype development of semantic webs shows that enterprises can widely interoperate in an unambiguous and autonomous manner; hence, virtual enterprise is realizable at a low cost.

  1. Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility

    Energy.gov [DOE]

    Memorandum requesting a clarification of the circumstances under which a DOE Government Owned Contractor Operated (GOCO) facility may be considered a laser manufacturer and subject to FDA laser manufacturer requirements and other points of interpretation of the FDA Exemption Letter, 78EL-01DOE (DOE exemption or exemption) by the LSSG for GOCG facilities.

  2. Laser Manufacturing | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laser Manufacturing at GE Global Research Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Laser Manufacturing at GE Global Research Learn how laser sintering, an additive laser manufacturing process practiced at GE Global Research, makes parts from metal powder. You Might Also Like Munich_interior_V 10 Years ON: From

  3. CMI Unique Facility: Ferromagnetic Materials Characterization Facility |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Critical Materials Institute Ferromagnetic Materials Characterization Facility The Ferromagnetic Materials Characterization Facility is one of more than a dozen unique facilities developed by the Critical Materials Institute, an Energy Innovation Hub of the U.S. Department of Energy. CMI ferromagnetic materials characterization facility at The Ames Laboratory. In the search for substitute materials to replace rare earths in permanent magnets, whenever promising materials are identified,

  4. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    20, 2010 Facility News ARM Mobile Facility Blogs from Steamboat Springs Bookmark and Share This month, team members for the second ARM Mobile Facility (AMF2) are in Steamboat...

  5. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    April 7, 2011 Facility News Review Panel States ARM Facility "Without Peer" Bookmark and ... The latest ARM Facility review was conducted in mid-February by a six-member review panel ...

  6. The President's Manufacturing Initiative | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Presentation prepared by Dale Hall for the Roadmap Workshop on Manufacturing R&D for the ... Manufacturing National Program Office Roadmap on Manufacturing R&D for the Hydrogen ...

  7. CFL Manufacturers: ENERGY STAR Letters

    Energy.gov [DOE]

    DOE issued letters to 25 manufacturers of compact fluorescent lamps (CFLs) involving various models after PEARL Cycle 9 testing indicated that the models do not meet the ENERGY STAR specification and, therefore, are disqualified from the ENERGY STAR Program.

  8. PEM Stack Manufacturing: Industry Status

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    © 2009 BALLARD POWER SYSTEMS INC. ALL RIGHTS RESERVED JULY 2009 B U I L D I N G A C L E A N E N E R G Y G R O W T H C O M P A N Y B A L L A R D P O W E R S Y S T E M S PEM Stack Manufacturing: Industry Status Duarte R. Sousa, PE August 11, 2011 AUGUST 2009 P A G E 2 Overview of PEM Stack Manufacturing MEA Manufacturing Plate Manufacturing Stack Assembly Stack Conditioning and Testing Package and Ship For each of the four main processes, the following will be provided: 1. A brief history of

  9. 2014 Manufacturing Energy Consumption Survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    U S C E N S U S B U R E A U 2014 Manufacturing Energy Consumption Survey Sponsored by the Energy Information Administration U.S. Department of Energy Administered and Compiled by ...

  10. Alternative Energy Manufacturing Tax Credit

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Alternative Energy Manufacturing Tax Credit is a nonrefundable tax credit for up to 100% of new state tax revenues (including state, corporate, sales, and withholding taxes) over the life of a...

  11. Solar Thermal Collector Manufacturing Activities

    Annual Energy Outlook

    U.S. Total 74 88 Percent of Total Sales Revenue Number of Companies Source: U.S. Energy Information Administration, Form EIA-63A, "Annual Solar Thermal Collector Manufacturers ...

  12. Manufacturing means jobs ? Mike Arms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Manufacturing Means Jobs - Mike Arms Mike Arms and I usually meet and say hello at the East Tennessee Economic Council meetings each Friday morning at 7:30 a.m. This unique meeting...

  13. Manufacturing Consumption of Energy 1994

    Energy Information Administration (EIA) (indexed site)

    2(94) Distribution Category UC-950 Manufacturing Consumption of Energy 1994 December 1997 Energy Information Administration Office of Energy Markets and End Use U.S. Department of...

  14. First Solar Manufacturing Solar Modules

    Energy.gov [DOE]

    In this photograph, a First Solar associate handles photovoltaic materials at the company's Ohio manufacturing plant. First Solar is an industry partner with the U.S. Department of Energy Solar...

  15. McKay Bay Facility Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Biomass Facility Facility McKay Bay Facility Sector Biomass Facility Type Municipal Solid Waste Location Hillsborough County, Florida Coordinates 27.9903597, -82.3017728...

  16. National User Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    National User Facilities Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions Berkeley Lab's User Facilities-Engines of Discovery Berkeley Lab's User Facilities provide state-of-the-art resources for scientists across the nation and around the world. About 10,000 researchers a year use these facilities, representing nearly one third of the total for all Department of Energy

  17. Manufacturing R&D

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D The Manufacturing R&D sub-program in the Fuel Cell Technologies Office (FCTO) improves processes and reduces the cost of manufacturing components and systems for hydrogen production and delivery, hydrogen storage, and fuel cells for transportation, stationary, and portable applications. Scaling up production of today's hydrogen and fuel cell components and systems (currently built using laboratory-scale fabrication technologies) to high- volume commercially-viable products is challenging.

  18. Innovative Manufacturing Initiative Recognition Day

    Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers dramatically increase the energy efficiency of their operations and reduce costs. Each project will advance transformational technologies and materials that can benefit a broad cross-section of the domestic economy. This event created a platform for inter-agency and industry networking and also raised awareness among congressional staff and private investors.

  19. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    30, 2009 Facility News ARM Aerial Facility Leads International Discussions on Aircraft Research Bookmark and Share Five research aircraft participated in the VAMOS...

  20. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (BERAC) published findings and recommendations from their assessment of the effectiveness of ARM Climate Research Facility as a national scientific user facility. Based on...

  1. Facilities | Photovoltaic Research | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the facilities below in their research and development to provide foundational support for the photovoltaic (PV) industry and PV users. Photo of the Solar Research Energy Facility. ...

  2. Facilities, Partnerships, and Resources

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear Energy Safety Technologies Facilities Battery Abuse Testing Laboratory Cylindrical Boiling Facility ...

  3. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    13, 2014 Facility News Characterizing Ice Nuclei Over Southern Great Plains Bookmark and Share Placed on the upper platform of the SGP Guest Instrument Facility, this filter...

  4. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman ... DOESC-ARM-14-003 ARM Climate Research Facility Quarterly Ingest Report First Quarter: ...

  5. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman ... DOESC-ARM-14-028 ARM Climate Research Facility Quarterly Ingest Report Fourth Quarter: ...

  6. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman ... DOESC-ARM-15-003 ARM Climate Research Facility Quarterly Ingest Report First Quarter: ...

  7. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOESC-ARM-15-020 ARM Climate Research Facility Quarterly Ingest Report Second Quarter: ... maintained by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. ...

  8. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman April ... DOESC-ARM-14-014 ARM Climate Research Facility Quarterly Ingest Report Second Quarter: ...

  9. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Journal Special Issue Includes Mobile Facility Data from Germany Bookmark and Share The ARM Mobile Facility operated in Heselbach, Germany, as part of the COPS surface network. The ...

  10. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of instruments collecting data for the ARM Mobile Facility field campaign at Point Reyes National Seashore. Since March 2005, the ARM Mobile Facility (AMF) has been at Point...

  11. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the SGP site, and will begin in March for the ARM Mobile Facility deployment in Point Reyes, California. Launches for the ARM Climate Research Facility Tropical Western Pacific...

  12. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    a number of other guest instruments at the ARM Mobile Facility deployment site at Point Reyes National Seashore in California. The ARM Mobile Facility's (AMF's) inaugural field...

  13. Facilities | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Additionally, the 4 Tesla Magnet Facility reuses hospital MRI magnets to provide benchmarking for new muon experiments that will be performed at Fermilab. 4 Tesla Magnet Facility ...

  14. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Interferometers Compared for ARM Mobile Facility Deployment in China Bookmark and Share ... Mobile Facility in 2008 for a field campaign to study Aerosol Indirect Effects in China. ...

  15. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    January 11, 2007 Facility News ARM Mobile Facility Moves to China in 2008 for Study of ... China generates exceptionally high amounts of aerosol particles whose influence on the ...

  16. Facilities | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research Facility Distributed Energy Research Center Engine Research Facility Heat Transfer Laboratory Tribology Laboratory Transportation Beamline at the Advanced Photon Source...

  17. NREL: Biomass Research - Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities At NREL's state-of-the-art biomass research facilities, researchers design and optimize processes to convert renewable biomass feedstocks into transportation fuels and...

  18. ARM - NSA Barrow Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Barrow Facility NSA Related Links Facilities and Instruments Barrow Atqasuk Oliktok Point (AMF3) ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site NSA...

  19. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    November 9, 2012 Facility News Unmanned Aircraft Test Flights Completed at Oliktok Point ... for the ARM Facility to evaluate various unmanned aerial systems (UAS) in the frigid ...

  20. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    May 15, 2008 Facility News National User Facility Organization Meets to Discuss Progress and Ideas Bookmark and Share In late April, the ARM Technical Director attended an annual...

  1. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    March 15, 2010 Facility News Closing in on Aircraft Campaign in California Bookmark and ... and Radiative Effects Study (CARES) in California, the ARM Aerial Facility is putting the ...

  2. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    February 28, 2006 Facility News Network of Infrared Thermometers Nearly Complete at SGP Bookmark and Share Red dots indicate extended facilities at SGP with the new IRTs ...

  3. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    15, 2005 Facility News Aging, Overworked Computer Network at SGP Gets Overhauled Bookmark and Share This aerial map of instruments deployed at the SGP Central Facility provides...

  4. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to our new ARM News Center. The RSS feed will alert readers to the latest ARM science and ARM Climate Research Facility news, events, feature stories, facility updates,...

  5. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    facility use by total visitor days and facility to track actual visitors and active user research computer accounts. Historical data show an apparent relationship between the...

  6. Advanced Battery Manufacturing (VA)

    SciTech Connect

    Stratton, Jeremy

    2012-09-30

    LiFeBATT has concentrated its recent testing and evaluation on the safety of its batteries. There appears to be a good margin of safety with respect to overheating of the cells and the cases being utilized for the batteries are specifically designed to dissipate any heat built up during charging. This aspect of LiFeBATTs products will be even more fully investigated, and assuming ongoing positive results, it will become a major component of marketing efforts for the batteries. LiFeBATT has continued to receive prismatic 20 Amp hour cells from Taiwan. Further testing continues to indicate significant advantages over the previously available 15 Ah cells. Battery packs are being assembled with battery management systems in the Danville facility. Comprehensive tests are underway at Sandia National Laboratory to provide further documentation of the advantages of these 20 Ah cells. The company is pursuing its work with Hybrid Vehicles of Danville to critically evaluate the 20 Ah cells in a hybrid, armored vehicle being developed for military and security applications. Results have been even more encouraging than they were initially. LiFeBATT is expanding its work with several OEM customers to build a worldwide distribution network. These customers include a major automotive consulting group in the U.K., an Australian maker of luxury off-road campers, and a number of makers of E-bikes and scooters. LiFeBATT continues to explore the possibility of working with nations that are woefully short of infrastructure. Negotiations are underway with Siemens to jointly develop a system for using photovoltaic generation and battery storage to supply electricity to communities that are not currently served adequately. The IDA has continued to monitor the progress of LiFeBATTs work to ensure that all funds are being expended wisely and that matching funds will be generated as promised. The company has also remained current on all obligations for repayment of an IDA loan and lease

  7. Advanced Qualification of Additive Manufacturing Workshop

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors, diagnostics...

  8. Third Annual American Energy and Manufacturing Competitiveness...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and included showpieces highlighting advanced composites manufacturing and large scale additive manufacturing. Image: Photo courtesy of Attlee Photography View All Galleries

  9. 2010 Manufacturing Energy and Carbon Footprints: Definitions...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Energy and Carbon Footprints: Definitions and Assumptions This 13-page document defines key terms and details assumptions and references used in the Manufacturing ...

  10. ITP Nanomanufacturing: Manufacturing of Surfaces with Nanoscale...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing of Surfaces with Nanoscale and Microscale Features ITP Nanomanufacturing: Manufacturing of Surfaces with Nanoscale and Microscale Features superhydrophobicsurfaces.p...

  11. Energy Intensity Indicators: Manufacturing Energy Intensity

    Energy.gov [DOE]

    The manufacturing sector comprises 18 industry sectors, generally defined at the three-digit level of the North American Industrial Classification System (NAICS). The manufacturing energy data...

  12. Miraial formerly Kakizaki Manufacturing | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    to: navigation, search Name: Miraial (formerly Kakizaki Manufacturing) Place: Tokyo, Japan Zip: 171-0021 Product: Manufacturer of wafer handling products and other components...

  13. Testing, Manufacturing, and Component Development Projects |...

    Office of Environmental Management (EM)

    Testing, Manufacturing, and Component Development Projects This report covers the Wind and Water Power Technologies Office's testing, manufacturing, and component development ...

  14. Energy Department Invests in Innovative Manufacturing Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    in Innovative Manufacturing Technologies Energy Department Invests in Innovative Manufacturing Technologies June 13, 2012 - 12:00am Addthis The Energy Department announced on June...

  15. Foreword: Additive Manufacturing: Interrelationships of Fabrication...

    Office of Scientific and Technical Information (OSTI)

    Moreover, a variety of fields such as aerospace, military, automotive, and biomedical are employing this manufacturing technique as a way to decrease costs, increase manufacturing ...

  16. Wind Energy & Manufacturing | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wind Energy & Manufacturing Jump to: navigation, search Blades manufactured at Gamesa's factory in Ebensburg, Pennsylvania, will be delivered to wind farms across the United...

  17. Manufacturing Consumption of Energy 1991--Combined Consumption...

    Energy Information Administration (EIA) (indexed site)

    call 202-586-8800 for help. Return to Energy Information Administration Home Page. Home > Energy Users > Manufacturing > Consumption and Fuel Switching Manufacturing Consumption of...

  18. American Wind Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    American Wind Manufacturing Addthis 1 of 9 Nordex USA -- a global manufacturer of wind turbines -- delivered and installed turbine components for the Power County Wind...

  19. FY 2008 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2008 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2008 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  20. FY 2010 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2010 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2010 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  1. FY 2009 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2009 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2009 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  2. FY 2006 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2006 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2006 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  3. FY 2007 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2007 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2007 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  4. FY 2011 Honeywell Federal Manufacturing & Technologies, LLC,...

    National Nuclear Security Administration (NNSA)

    FY 2011 Honeywell Federal Manufacturing & Technologies, LLC, PER Summary SUMMARY OF FY 2011 HONEYWELL FEDERAL MANUFACTURING & TECHNOLOGIES, LLC, AWARD FEE DETERMINATION Total ...

  5. Oak Ridge Centers for Manufacturing Technology - Partnership...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Impact on the Semiconductor Industry, part 2 The Oak Ridge Centers for Manufacturing Technology in partnership with SEMATECH (Semiconductor Manufacturing TECHnology) had...

  6. Advanced Technology Vehicles Manufacturing Loan Program | Department...

    Office of Environmental Management (EM)

    Technology Vehicles Manufacturing Loan Program Advanced Technology Vehicles Manufacturing Loan Program ATVM-Program-Application-Overview.pdf More Documents & Publications ATVM...

  7. Clean Energy Manufacturing Initiative Southeast Regional Summit...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Clean Energy Manufacturing Initiative Southeast Regional Summit Clean Energy Manufacturing Initiative Southeast Regional Summit July 9, 2015 8:30AM to 6:00PM EDT Renaissance...

  8. Industrial Activities at DOE: Efficiency, Manufacturing, Process...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Industrial Activities at DOE: Efficiency, Manufacturing, Process, and Materials R&D Industrial Activities at DOE: Efficiency, Manufacturing, Process, and Materials R&D Overview of ...

  9. Processing and Manufacturing Equipment | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Processing and Manufacturing Equipment Jump to: navigation, search TODO: Add description List of Processing and Manufacturing Equipment Incentives Retrieved from "http:...

  10. Technologies Enabling Agile Manufacturing (TEAM) ? an ORCMT...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Technologies Enabling Agile Manufacturing (TEAM) - An ORCMT success story Technologies Enabling Agile Manufacturing (TEAM) was one of the larger programs to come from the...

  11. Bio Solutions Manufacturing Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Solutions Manufacturing Inc Jump to: navigation, search Name: Bio Solutions Manufacturing Inc Place: Las Vegas, Nevada Zip: 89103 Product: Waste-to-energy bioremediation developer....

  12. DOE - Office of Legacy Management -- Manufacturing Laboratories...

    Office of Legacy Management (LM)

    Manufacturing Laboratories Inc - MA 0-04 FUSRAP Considered Sites Site: MANUFACTURING LABORATORIES, INC. (MA.0-04 ) Eliminated from further consideration under FUSRAP Designated...

  13. Chung Hsin Electric Machinery Manufacturing Corporation CHEM...

    OpenEI (Open Energy Information) [EERE & EIA]

    Chung Hsin Electric Machinery Manufacturing Corporation CHEM Jump to: navigation, search Name: Chung Hsin Electric & Machinery Manufacturing Corporation (CHEM) Place: Taoyuan...

  14. Leitner Shriram Manufacturing Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Manufacturing Ltd Jump to: navigation, search Name: Leitner Shriram Manufacturing Ltd Place: Chennai, Tamil Nadu, India Zip: 600095 Sector: Wind energy Product: Chennai-based JV...

  15. Advanced Qualification of Additive Manufacturing Materials Workshop

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Advanced Qualification of Additive Manufacturing Materials Workshop Advanced Qualification of Additive Manufacturing Materials Workshop WHEN: Jul 20, 2015 8:30 AM - Jul 21, 2015...

  16. Aurora Photovoltaics Manufacturing | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Photovoltaics Manufacturing Jump to: navigation, search Name: Aurora Photovoltaics Manufacturing Place: Lawrenceville, New Jersey Zip: 8648 Sector: Solar Product: A subsidiary of...

  17. Stronger Manufacturers' Energy Efficiency Standards for Residential...

    Energy Saver

    Stronger Manufacturers' Energy Efficiency Standards for Residential Air Conditioners Go Into Effect Today Stronger Manufacturers' Energy Efficiency Standards for Residential Air ...

  18. China Shandong Penglai Electric Power Equipment Manufacturing...

    OpenEI (Open Energy Information) [EERE & EIA]

    Penglai Electric Power Equipment Manufacturing Jump to: navigation, search Name: China Shandong Penglai Electric Power Equipment Manufacturing Place: Penglai, Shandong Province,...

  19. Manufacturing Institutes Exhibit American Innovation at Hannover...

    Office of Environmental Management (EM)

    Manufacturing Institutes Exhibit American Innovation at Hannover Messe Manufacturing Institutes Exhibit American Innovation at Hannover Messe April 25, 2016 - 4:30pm Addthis The ...

  20. FACTSHEET: Next Generation Power Electronics Manufacturing Innovation...

    Energy.gov [DOE] (indexed site)

    a public-private manufacturing innovation institute for next generation power electronics. ... network of up to 45 manufacturing innovation institutes that help make America a ...

  1. Advanced Manufacturing Office and Potential Technologies for...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for Clean Energy Manufacturing Innovation October 8, 2014 DOEDOD Planning ... is a leader in advanced manufacturing innovation and implementing the National Network ...

  2. Energy Conservation Standards for Manufactured Housing. Notice...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EERE-2009-BT-BC-0021 RIN: 1904-AC11 Energy Conservation Standards for Manufactured ... which directs DOE to establish energy conservation standards for manufactured housing. ...

  3. Manufacturing Energy and Carbon Footprint References | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Energy and Carbon Footprint References footprintreferences.pdf (309.04 KB) More Documents & Publications 2010 Manufacturing Energy and Carbon Footprints: References ...

  4. Clean Energy Manufacturing Funding Opportunities | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Funding Opportunities Clean Energy Manufacturing Funding Opportunities To accomplish the goals of the Clean Energy Manufacturing Initiative (CEMI), the U.S. Department of Energy ...

  5. NREL: Energy Systems Integration Facility - Capabilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Capabilities The Energy Systems Integration Facility houses an unparalleled collection of state-of-the-art capabilities that supports the development, evaluation, and demonstration of innovative clean energy technologies. Specialty research capabilities include: Systems integration Prototype and component development Manufacturing and material diagnostics High-performance computing and analytics. Photo of two men standing in front of an immersive 3-D simulation screen. Among the capabilities of

  6. TX-100 manufacturing final project report.

    SciTech Connect

    Ashwill, Thomas D.; Berry, Derek S.

    2007-11-01

    This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and Twist-Coupled Prototype project. The TX-100 blade is a 9 meter prototype blade designed with bend-twist coupling to augment the mitigation of peak loads during normal turbine operation. This structural coupling was achieved by locating off axis carbon fiber in the outboard portion of the blade skins. The report will present the tooling selection, blade production, blade instrumentation, blade shipping and adapter plate design and fabrication. The baseline blade used for this project was the ERS-100 (Revision D) wind turbine blade. The molds used for the production of the TX-100 were originally built for the production of the CX-100 blade. The same high pressure and low pressure skin molds were used to manufacture the TX-100 skins. In order to compensate for the difference in skin thickness between the CX-100 and the TX-100, however, a new TX-100 shear web plug and mold were required. Both the blade assembly fixture and the root stud insertion fixture used for the CX-100 blades could be utilized for the TX-100 blades. A production run of seven TX-100 prototype blades was undertaken at TPI Composites during the month of October, 2004. Of those seven blades, four were instrumented with strain gauges before final assembly. After production at the TPI Composites facility in Rhode Island, the blades were shipped to various test sites: two blades to the National Wind Technology Center at the National Renewable Energy Laboratory in Boulder, Colorado, two blades to Sandia National Laboratory in Albuquerque, New Mexico and three blades to the United States Department of Agriculture turbine field test facility in Bushland, Texas. An adapter plate was designed to allow the TX-100 blades to be installed on existing Micon 65/13M turbines at the USDA site. The conclusion of this program is the kick-off of the TX-100 blade testing at the three

  7. ARM - SGP Radiometric Calibration Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Radiometric Calibration Facility SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Summer Training SGP Fact Sheet Images Information for Guest Scientists Contacts SGP Radiometric Calibration Facility The Radiometric Calibration Facility (RCF) provides shortwave radiometer

  8. Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing

    Energy.gov [DOE]

    Office: Advanced ManufacturingPost date: 9/15/15Original Closing Date for Applications: Jan 29, 2016 A mandatory Concept Paper is due 11/04/2015 at 5:00pm ET.

  9. Guide to research facilities

    SciTech Connect

    Not Available

    1993-06-01

    This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

  10. Worldwide Energy and Manufacturing USA Inc formerly Worldwide...

    OpenEI (Open Energy Information) [EERE & EIA]

    and Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name: Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)...

  11. Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing- Informed Design

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing ADVANCED MANUFACTURING OFFICE Sustainable Manufacturing via Multi-Scale, Physics-Based Process Modeling and Manufacturing- Informed Design Improving Product and Manufacturing Process Design through a More Accurate and Widely Applicable Modeling Framework. This project aims to fll the knowledge gap between upstream design and downstream manufacturing processes by developing a manufacturing-informed design framework enabled by multi-scale, physics-based process models. This framework

  12. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    22, 2011 [Facility News] Request for Proposals Now Open Bookmark and Share The ARM Climate Research Facility is now accepting applications for use of an ARM mobile facility (AMF), the ARM aerial facility (AAF), and fixed sites. Proposals are welcome from all members of the scientific community for conducting field campaigns and scientific research using the ARM Facility, with availability as follows: AMF2 available December 2013 AMF1 available March 2015 AAF available between June and October

  13. Facilities | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Facilities Argonne's Chemical Sciences and Engineering (CSE) division maintains a number of state-of-the-art facilities for advanced chemistry research. These facilities are dedicated to two main purposes: the analysis and creation of next-generation battery materials, and the analysis and generation of advanced catalysts for electrochemistry. More information on the full suite of CSE facilities can be found below. Advanced Electron Paramagnetic Resonance (EPR) Facility The Solar Energy

  14. Facility overview for commercial application of selected Rocky Flats facilities

    SciTech Connect

    1996-11-01

    The purpose of this Facility Overview is to support the Rocky Flats Local Impacts Initiative`s Request for Interest, to solicit interest from commercial corporations for utilizing buildings 865 and 883, and the equipment contained within each building, for a commercial venture. In the following sections, this document describes the Rocky Flats Site, the buildings available for lease, the equipment within these buildings, the site services available to a tenant, the human resources available to support operations in buildings 865 and 883, and the environmental condition of the buildings and property. In addition, a brief description is provided of the work performed to date to explore the potential products that might be manufactured in Buildings 865 and 883, and the markets for these products.

  15. Metrology for Fuel Cell Manufacturing

    SciTech Connect

    Stocker, Michael; Stanfield, Eric

    2015-02-04

    The project was divided into three subprojects. The first subproject is Fuel Cell Manufacturing Variability and Its Impact on Performance. The objective was to determine if flow field channel dimensional variability has an impact on fuel cell performance. The second subproject is Non-contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks. The objective was to enable cost reduction in the manufacture of fuel cell plates by providing a rapid non-contact measurement system for in-line process control. The third subproject is Optical Scatterfield Metrology for Online Catalyst Coating Inspection of PEM Soft Goods. The objective was to evaluate the suitability of Optical Scatterfield Microscopy as a viable measurement tool for in situ process control of catalyst coatings.

  16. Method for manufacturing glass frit

    DOEpatents

    Budrick, Ronald G.; King, Frank T.; Nolen, Jr., Robert L.; Solomon, David E.

    1977-01-01

    A method of manufacturing a glass frit for use in the manufacture of uniform glass microspheres to serve as containers for laser fusion fuel to be exposed to laser energy which includes the formation of a glass gel which is then dried, pulverized, and very accurately sized to particles in a range of, for example, 125 to 149 micrometers. The particles contain an occluded material such as urea which expands when heated. The sized particles are washed, dried, and subjected to heat to control the moisture content prior to being introduced into a system to form microspheres.

  17. Manufacturing Pre-Solicitation Transcript

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DEPARTMENT OF ENERGY HYDROGEN PROGRAM MANUFACTURING R&D PRE-SOLICITATION MEETING FRIDAY, MAY 18, 2007 CRYSTAL GATEWAY MARRIOTT 1700 JEFFERSON DAVIS HIGHWAY SALONS 5 AND 6 ARLINGTON, VA. 22202 2 A G E N D A 1:00 p.m. Welcome and Opening Remarks JoAnn Milliken, Chief Engineer, U.S. DOE Hydrogen Program 1:05 p.m. FOA Application Process and Anticipated Timeline Jill Gruber, Project Officer, U.S. DOE Hydrogen Program, Golden Field Office 1:30 p.m. Manufacturing FOA Proposed Scope and Topics Pete

  18. Calibration Facilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Calibration Facilities Calibration Facilities Calibration Facilities Calibration Facilities Calibration Facilities Calibration Facilities DOE supports the development, standardization, and maintenance of calibration facilities for environmental radiation sensors. Radiation standards at the facilities are primarily used to calibrate portable surface gamma-ray survey meters and borehole logging instruments used for uranium and other mineral exploration and remedial action measurements. Standards

  19. A feasibility study for a manufacturing technology deployment center

    SciTech Connect

    Not Available

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  20. White House Announces Eighth Manufacturing Innovation Institute |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy White House Announces Eighth Manufacturing Innovation Institute White House Announces Eighth Manufacturing Innovation Institute April 6, 2016 - 4:49pm Addthis On Thursday, April 1, the White House announced a new institute which will focus on revolutionary fibers and textile manufacturing. This new institute is the eighth manufacturing hub to be awarded as part of the National Network for Manufacturing Innovation (NNMI). Collectively, the federal government's commitment

  1. Manufacturing Energy and Carbon Footprints Scope

    Energy.gov [DOE] (indexed site)

    Manufacturing Energy and Carbon Footprint Scope The footprint analysis looks at a large subset of U.S. manufacturing, with the objective of capturing the bulk share of energy consumption and carbon emissions. Table 1 lists the fifteen manufacturing sectors selected for analysis; a sixteenth footprint has also been prepared for the entire manufacturing sector. Manufacturing sectors are listed by their respective NAICS (North American Industry Classification System) codes. NAICS descriptions of

  2. Manufacturing Energy and Carbon Footprints (2006 MECS)

    Energy.gov [DOE]

    Energy and Carbon Footprints provide a mapping of energy from supply to end use in manufacturing. They show us where energy is used and lost—and where greenhouse gases (GHGs) are emitted. Footprints are available below for 15 manufacturing sectors (representing 94% of all manufacturing energy use) and for U.S. manufacturing as a whole. Analysis of these footprints is also available in the U.S. Manufacturing Energy Use and Greenhouse Gas Emissions Analysis report.

  3. Explore Careers in Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Explore Careers in Manufacturing The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a transformation in U.S. manufacturing. The Advanced Manufacturing Office (AMO) invests in public-private research and development partnerships and encourages a culture of continuous improvement in corporate energy management to bring about a

  4. Manufacturing Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Manufacturing Success Stories Manufacturing Success Stories RSS The Office of Energy Efficiency and Renewable Energy's (EERE) successes in developing technologies and processes for more efficient energy management systems create big opportunities for energy savings and new jobs in manufacturing. Explore EERE's manufacturing success stories below. August 17, 2016 Distillation columns like this one are used in a variety of chemical manufacturing applications. Photo courtesy of Organic Chemistry

  5. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    theme was: "How we use science, technology, engineering, and math (STEM) in business and manufacturing." "Students and parents had an opportunity to interact directly with...

  6. CRAD, Facility Safety- Nuclear Facility Safety Basis

    Office of Energy Efficiency and Renewable Energy (EERE)

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Nuclear Facility Safety Basis.

  7. CRAD, Facility Safety- Nuclear Facility Design

    Office of Energy Efficiency and Renewable Energy (EERE)

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Nuclear Facility Design.

  8. Process for manufacturing multilayer capacitors

    DOEpatents

    Lauf, Robert J.; Holcombe, Cressie E.; Dykes, Norman L.

    1996-01-01

    The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation.

  9. Process for manufacturing multilayer capacitors

    DOEpatents

    Lauf, R.J.; Holcombe, C.E.; Dykes, N.L.

    1996-01-02

    The invention is directed to a method of manufacture of multilayer electrical components, especially capacitors, and components made by such a method. High capacitance dielectric materials and low cost metallizations layered with such dielectrics may be fabricated as multilayer electrical components by sintering the metallizations and the dielectrics during the fabrication process by application of microwave radiation. 4 figs.

  10. Heat treating of manufactured components

    SciTech Connect

    Ripley, Edward B.

    2012-05-22

    An apparatus for heat treating manufactured components using microwave energy and microwave susceptor material is disclosed. The system typically includes an insulating vessel placed within a microwave applicator chamber. A moderating material is positioned inside the insulating vessel so that a substantial portion of the exterior surface of each component for heat treating is in contact with the moderating material.

  11. Experiences on IGSCC crack manufacturing

    SciTech Connect

    Veron, P.

    1997-02-01

    The author presents his experience in manufacturing IGSCC realistic defects, mainly in INCONEL 600 MA Steam Generator Tubes. From that experience he extracts some knowledge about this cracking (influence of chemistry in the environment, stress state, crack growth rate, and occurrence in laboratory condition of break before leak).

  12. ORPS Facility Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy AU User Support EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 Note:  Only one facility per form  Type or print all entries 1. TYPE OF CHANGE  Add a Facility (Complete Section 1.A, then go to Section 2)  Change a Facility (Complete Section 1.B, then go to Section)  Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are

  13. Canyon Facilities - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    About Us Projects & Facilities Canyon Facilities About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Contact Us 100 Area 118-K-1 Burial Ground 200 Area 222-S Laboratory 242-A Evaporator 300 Area 324 Building 325 Building 400 Area/Fast Flux Test Facility 618-10 and 618-11 Burial Grounds 700 Area B Plant B Reactor C Reactor Canister Storage Building and Interim Storage Area Canyon Facilities Cold Test Facility D and DR Reactors Effluent Treatment Facility Environmental

  14. Industrial Assessment Centers - Small Manufacturers Reduce Energy & Increase Productivity

    SciTech Connect

    2015-11-06

    Since 1976, the Industrial Assessment Centers (IACs), administered by the US Department of Energy, have supported small and medium-sized American manufacturers to reduce energy use and increase their productivity and competitiveness. The 24 IACs, located at premier engineering universities around the country (see below), send faculty and engineering students to local small and medium-sized manufacturers to provide no-cost assessments of energy use, process performance and waste and water flows. Under the direction of experienced professors, IAC engineering students analyze the manufacturer’s facilities, energy bills and energy, waste and water systems, including compressed air, motors/pumps, lighting, process heat and steam. The IACs then follow up with written energy-saving and productivity improvement recommendations, with estimates of related costs and payback periods.

  15. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    March 22, 2007 Facility News GEWEX News Features Dust Data from ARM Mobile Facility ... The AMF recorded a major dust storm that passed through the area in March, and combined ...

  16. Technology Transitions Facilities Database

    Energy.gov [DOE]

    The types of R&D facilities at the DOE Laboratories available to the public typically fall into three broad classes depending on the mode of access: Designated User Facilities, Shared R&D...

  17. Jupiter Laser Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jupiter Laser Facility The commissioning of the Titan Petawatt-Class laser to LLNL's Jupiter Laser Facility (JLF) has provided a unique platform for the use of petawatt (PW)-class ...

  18. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman April ... DOESC-ARM-14-009 ARM Climate Research Facility Quarterly Value-Added Product Report First ...

  19. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman January ... DOESC-ARM-14-002 ARM Climate Research Facility Quarterly Value-Added Product Report First ...

  20. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 ARM Climate Research Facility Quarterly Value-Added Product Report Chitra Sivaraman ... DOESC-ARM-11-023 ARM Climate Research Facility Quarterly Value-Added Product Report ...

  1. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 ARM Climate Research Facility Quarterly Ingest Status Report A Koontz C Sivaraman July ... DOESC-ARM-14-023 ARM Climate Research Facility Quarterly Ingest Report Third Quarter: ...

  2. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    0 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman July 2014 ... DOESC-ARM-14-020 ARM Climate Research Facility Quarterly Value-Added Product Report Third ...

  3. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman February ... DOESC-ARM-12-002 ARM Climate Research Facility Quarterly Value-Added Product Report First ...

  4. ARM Climate Research Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1 ARM Climate Research Facility Quarterly Value-Added Product Report Chitra Sivaraman ... DOESC-ARM-11-021 ARM Climate Research Facility Quarterly Value-Added Product Report Third ...

  5. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    April 30, 2008 Facility News ARM Outreach Materials Chosen for Earth Day Display in Washington DC Bookmark and Share Posters for the ARM Mobile Facility and ARM Education and...

  6. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Data Available from ARM Mobile Facility Deployment in China Bookmark and Share The Study of Aerosol Indirect Effects in China was anchored by the ARM Mobile Facility in Shouxian ...

  7. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    facility use by total visitor days-broken down by institution type, gender, race, citizenship, visitor role, visit purpose, and facility-for actual visitors and for active user...

  8. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Farewell to Dan Nelson, SGP Facilities Manager Bookmark and Share Dan Nelson Dan Nelson Dan Nelson, long-time facilities manager at the ARM Southern Great Plains site, is heading...

  9. Facilities | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    JLab Buildings Facilities Management & Logistics is responsible for performing or specifying performance of all Jefferson Lab facility maintenance. A D D I T I O N A L L I N K S:...

  10. Agenda: Fiber Reinforced Polymer Composite Manufacturing Workshop

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advanced Manufacturing Office (AMO) manufacturing.energy.gov 3 Morning Agenda 9:00am - 9:05am Welcome Mark Johnson Director, Advanced Manufacturing Office 9:05am - 9:20am Clean Energy Manufacturing Initiative David Danielson Assistant Secretary Energy Efficiency and Renewable Energy 9:20am - 9:50am Advanced Manufacturing Office Overview and Review of RFI Results Mark Johnson Director, Advanced Manufacturing Office 9:50am - 10:30am Panel Discussion: DOE Perspectives Mark Shuart, Advanced

  11. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    July 18, 2016 [Facility News] Next Round of Deadlines for Small Campaigns Coming Up Bookmark and Share The next deadline to propose for smaller field campaigns will be August 22. Small campaigns do not require a full deployment of ARM Facility equipment, like an ARM mobile or aerial facility. They require just an instrument or two, or are in conjunction with a larger facility operation. Costing less than $25,000, these campaigns give researchers access to ARM's equipment to perform focused,

  12. WIPP Nuclear Facilities Transparency

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Facilities Transparency Resources Transparency Home Purpose of Transparency Stakeholders Transparency Implementation Transparency Risks Transparency Technologies Other ...

  13. ARM - Facility News Article

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in atmospheric and terrestrial ecosystem research participated in the workshop, ... Chemical and Biological Measurements Ecosystem Aerial Facility Measurements BER staff ...

  14. Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ARGONNE LEADERSHIP COMPUTING FACILITY The 10-petaflops Mira supercomputer The Argonne Leadership Computing Facility (ALCF), a U.S. Department of Energy (DOE) Office of Science User Facility, provides its user community with computing time and staff support to pursue significant breakthroughs in science and engineering. The ALCF is one of two DOE leadership computing facilities in the nation dedicated to open science. www.alcf.anl.gov ENABLING SCIENCE With hundreds of thousands of processors

  15. Expertise & Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Expertise & Facilities Expertise & Facilities Our full spectrum of end-to-end integrated capabilities in explosives make Los Alamos the ideal place to develop, characterize, and test all types of explosives and explosives threat scenarios. v Award-winning scientists, state-of-the-art facilities LACED is built upon Los Alamos' unparalleled explosives detection capabilities derived from the expertise of award-winning scientists and state-of-the-art facilities. LACED is made up of 57

  16. NEAC Facilities Subcommittee Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Facilities Subcommittee Report Presentation to the NEAC Committee 12/11/2015 John I. Sackett Facilities Subcommittee Members * John Ahearne * Dana Christensen * Tom Cochran * Mike Corradini * Dave Hill * Hussein Khalil * Andy Klein * Paul Murray * John Sackett, chair Subcommittee Objectives * The objective of our deliberations has been to help DOE-NE develop a means to identify, prioritize and make available those facilities important to Nuclear Energy Research and Development. - All facilities

  17. WIPP - Public Reading Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Public Reading Facilities/Electronic Reading Facilities The Freedom of Information Act (FOIA) and Electronic FOIA (E-FOIA) require that various specific types of records, as well as various other records, be maintained in public reading facilities. Before you submit a FOIA request, we recommend you contact or visit the appropriate public reading facility to determine if the records you are seeking have already been released. The U.S. Department of Energy (DOE), as well as other related DOE

  18. Manufacturing

    Office of Environmental Management (EM)

    ... to show up in the market place (aluminum, carbon fiber). ... the US. The intent of the studies 103 was to help shape ... 106 107 108 Figure 2: Process flow diagrams to ...

  19. Manufacturing of Plutonium Tensile Specimens

    SciTech Connect

    Knapp, Cameron M

    2012-08-01

    Details workflow conducted to manufacture high density alpha Plutonium tensile specimens to support Los Alamos National Laboratory's science campaigns. Introduces topics including the metallurgical challenge of Plutonium and the use of high performance super-computing to drive design. Addresses the utilization of Abaqus finite element analysis, programmable computer numerical controlled (CNC) machining, as well as glove box ergonomics and safety in order to design a process that will yield high quality Plutonium tensile specimens.

  20. Additive Manufacturing: Pursuing the Promise

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lower energy intensity: These techniques save energy by eliminating production steps, using substantially less material, enabling reuse of by-products, and producing lighter products. Remanufacturing parts through advanced additive manufacturing and surface treatment processes can also return end-of-life products to as-new condition, 1 using only 2-25% of the energy required to make new parts. 2 * Less waste: Building objects up layer by layer, instead of traditional machining processes that cut

  1. Energy Efficient Thermoplastic Composite Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Boeing Research & Technology (Marc Matsen) U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. June 14-15, 2016 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  The objective of the project is to establish an effective and affordable method to lay- up and consolidate/join large thermoplastic composite aerospace structure with cycle times measured in minutes rather than hours.  Composite

  2. High Pressure Hydrogen Tank Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Workshop High Pressure Hydrogen Tank Manufacturing Mark Leavitt Quantum Fuel Systems Technologies Worldwide, Inc. August 11, 2011 This presentation does not contain any proprietary, confidential, or otherwise restricted information History of Innovations... Announced breakthrough in all-composite lightweight, high capacity, low-cost fuel storage technologies. * Developed a series of robust, OEM compatible electronic control products. Developed H 2 storage system for SunLine Tran-sit Hythane®

  3. Listing of Defense Nuclear Facilities

    Energy Saver

    Listing of Defense Nuclear Facilities The facilities listed below are considered DOE defense nuclear facilities for purposes of Section 3161. Kansas City Plant Pinellas Plant Mound ...

  4. ARM - Facility News Archive

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Archive Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes118 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 7 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 CARES 1 Data Quality Office 2 ENA 2 GOAMAZON 7 HI-SCALE 5 LASIC 3 MAGIC 15 MC3E 17 PECAN 3 SGP 8 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility

  5. ARM - Facility News

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    News Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes118 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 7 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 CARES 1 Data Quality Office 2 ENA 2 GOAMAZON 7 HI-SCALE 5 LASIC 3 MAGIC 15 MC3E 17 PECAN 3 SGP 8 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility

  6. Wheelabrator Westchester Biomass Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Westchester Biomass Facility Jump to: navigation, search Name Wheelabrator Westchester Biomass Facility Facility Wheelabrator Westchester Sector Biomass Facility Type Municipal...

  7. Hydrodynamic Testing Facilities Database | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hydrodynamic Testing Facilities Database (Redirected from Hydrodynamic Testing Facilities) Jump to: navigation, search Facility Operators By viewing Hydrodynamic Testing Facilities...

  8. Artisan Manufacturing: Order (2010-CW-0712)

    Energy.gov [DOE]

    DOE ordered Artisan Manufacturing Company, Inc., to pay a $5,000 civil penalty after finding Artisan Manufacturing had failed to certify that certain models of faucets comply with the applicable water conservation standard.

  9. Refrigerator Manufacturers: Order (2013-CE-5341)

    Energy.gov [DOE]

    DOE ordered Refrigerator Manufacturers, LLC to pay a $8,000 civil penalty after finding Refrigerator Manufacturers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  10. Clean Energy Manufacturing Incentive Grant Program

    Energy.gov [DOE]

    "Clean energy manufacturer" is defined as a biofuel producer, a manufacturer of renewable energy or nuclear equipment/products, or "products used for energy conservation, storage, or grid efficie...

  11. Advanced Methods for Manufacturing Newsletter- Issue 2

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Advanced Methods for Manufacturing (AMM) newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, and welding innovations currently funded by the Department of Energy’s Office of Nuclear Energy.

  12. Summit Manufacturing: Case Closure (2010-SE-0303)

    Energy.gov [DOE]

    DOE closed this case against Summit Manufacturing, Inc. without civil penalty after Summit Manufacturing provided information that the non-compliant products were not sold in the United States.

  13. NREL: Photovoltaics Research - Awards for Photovoltaic Manufacturing...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Awards for Photovoltaic Manufacturing R&D The following research efforts within the PV Manufacturing R&D Project were honored with prestigious industry awards. 1995-AstroPower (now ...

  14. Thin-Film Solar Cell Manufacturing

    Energy.gov [DOE]

    In this b-roll, thin-film photovoltaic cells are manufactured and deployed in Arizona. Steps shown in the manufacturing process include the screen printing of conductive material onto laminated...

  15. National Manufacturing Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    anticipated 400,000 people who want to experience U.S. manufacturing up close and in person. On October 2, the U.S. Department of Commerce's fourth annual Manufacturing Day will...

  16. Goodman Manufacturing: Order (2012-CE-1509)

    Energy.gov [DOE]

    DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

  17. Goodman Manufacturing: Proposed Penalty (2011-SE-4301)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing manufactured and distributed noncompliant basic model CPC180* commercial package air conditioners in the U.S.

  18. FACT SHEET: 48C MANUFACTURING TAX CREDITS

    Energy.gov [DOE]

    The Advanced Energy Manufacturing Tax Credit Program is helping build a robust U.S. manufacturing capacity to supply clean energy projects with American-made parts and equipment. On February 7,...

  19. Advanced Methods for Manufacturing Newslettter- Issue 3

    Energy.gov [DOE]

    The Advanced Methods for Manufacturing newsletter includes information about selected projects pertaining to additive manufacturing, concrete technologies, welding innovations and imaging techniques for design reconstruction currently funded by the Department of Energy's Office of Nuclear Energy.

  20. USA Manufacturing: Order (2013-CE-5336)

    Energy.gov [DOE]

    DOE ordered USA Manufacturing to pay a $8,000 civil penalty after finding USA Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  1. Energy & Manufacturing Workforce Training Topics List - Version...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) Energy & Manufacturing Workforce Training Topics List - Version 1.7 (02.11.14) View this searchable list of ...

  2. AMO Hosted Workshop on Composite Manufacturing

    Energy.gov [DOE]

    The U.S. Department of Energy's Advanced Manufacturing Office will host a workshop on Fiber Reinforced Polymer Composite Manufacturing on January 13, 2014 at the Hilton Crystal City in Arlington, VA.

  3. Fuel Cell Technologies Manufacturing Related Links

    Energy.gov [DOE]

    The following resources provide details about U.S. Department of Energy-funded fuel cell technologies manufacturing activities, other EERE and federal manufacturing activities and initiatives, research plans and roadmaps, workshops, and additional related links.

  4. Manufacturing in the Clean Energy Race

    ScienceCinema

    Danielson, David; Jackson, Keoki; Johnson, Mark; Wince-Smith, Deborah L.

    2016-06-24

    There is an energy and manufacturing revolution in the world today. Here is what the United States Department of Energy has done through collaborations in pursuit of American prosperity in the energy and manufacturing industry of tomorrow.

  5. Imperial Manufacturing: Order (2013-CE-5322)

    Energy.gov [DOE]

    DOE ordered Imperial Manufacturing, Inc. to pay a $8,000 civil penalty after finding Imperial Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  6. Working with SRNL - Our Facilities- Rapid Fabrication Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rapid Fabrication Facility Working with SRNL Our Facilities - Rapid Fabrication Facility At SRNL's Rapid Fabrication Facility, low-cost prototypes are produced, as well as parts and complete working models

  7. Biodiesel Outlook - An Engine Manufacturer's Perspective | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Outlook - An Engine Manufacturer's Perspective Biodiesel Outlook - An Engine ... More Documents & Publications Biodiesel ASTM Update and Future Technical Needs Recent ...

  8. 2014 Manufacturing Energy and Carbon Footprints: Scope

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Scope The energy and carbon footprint analysis examines fifteen individual manufacturing sectors that together consume 95% of U.S. manufacturing primary energy consumption and account for 94% of U.S. manufacturing combustion greenhouse gas (GHG) emissions. Manufacturing sectors are defined by their respective NAICS (North American Industry Classification System) codes. i Individual sectors were selected for analysis based on their relative energy intensities, contribution to the U.S. economy,

  9. Manufacturing Energy and Carbon Footprints Scope

    Energy.gov [DOE]

    List of manufacturing sectors selected for analysis along with North American Industry Classification System (NAICS) code descriptions

  10. Additive Manufacturing - Materials by Design - Energy Innovation...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Additive Manufacturing - Materials by Design Lawrence Livermore National Laboratory ... Send Message Lawrence Livermore National Laboratory Industrial Partnerships Office Visit ...

  11. Solid Oxide Fuel Cell Manufacturing Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cell Manufacturing Overview Hydrogen and Fuel Cell Technologies Manufacturing R&D Workshop August 11-12, 2011 Washington, DC Mark Richards, Eric Tang, Randy Petri Copyright © 2011 Versa Power Systems. All Rights Reserved. 2 Contents  Manufacturing development dependencies  SOFC elements  Cell manufacturing processes - Materials - Forming - Conditioning  Stack assembly  Quality control and testing  VPS projected cost reductions in SECA Copyright © 2011 Versa Power Systems.

  12. Secure Manufacturing | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the most difficult manufacturability and development obstacles; protecting classified and proprietary materials, components, and information; developing unique ...

  13. Clean Energy Manufacturing Initiative Industrial Efficiency and...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial ...

  14. Advanced Manufacturing Initiative Improves Turbine Blade Productivity |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an excerpt from the Second Quarter 2011 edition of the Wind Program R&D Newsletter. The Advanced Manufacturing Initiative (AMI) at DOE's Sandia National Laboratories is working with industry to improve manufacturing processes and create U.S. jobs by improving labor productivity in wind

  15. Alternative Interconnect Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Alternative Interconnect Manufacturing Alternative Interconnect Manufacturing Lead Performer: Vadient Optics LLC - Eugene, OR DOE Total Funding: $150,000 Project Term: February 22, 2016 - November 21, 2016 Funding Type: SBIR PROJECT OBJECTIVE Vadient Optics proposes to develop and demonstrate a practical commercial manufacturing route for its flexible, low-cost additive manufacturing process used to efficiently fabricate complex and highly efficient light-extraction optics for a variety of SSL

  16. advanced manufacturing office | netl.doe.gov

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Advanced Manufacturing Office The U.S. Department of Energy (DOE) funds the research, development, and demonstration of highly efficient and innovative manufacturing technologies. DOE has supported the development of more than 250 energy-saving industrial technologies that have been commercialized since 1976. DOE is also working to create a network of Manufacturing Innovation Institutes, each of which will create collaborative communities to target a unique technology in advanced manufacturing.

  17. Clean Energy Manufacturing Innovation Institute for Composite...

    Energy.gov [DOE] (indexed site)

    and Fuel Cell Technologies Research, Development, and Demonstrations Funding Opportunity Announcement Webinar Slides Fiber Reinforced Polymer Composite Manufacturing Workshop

  18. Clean Energy Manufacturing Analysis Center Webinar

    Energy.gov [DOE]

    The U.S. Department of Energy offers a webinar to address clean energy manufacturing on April 5. Register today!

  19. A National Strategic Plan For Advanced Manufacturing

    Office of Energy Efficiency and Renewable Energy (EERE)

    A National Strategic Plan For Advanced Manufacturing February 2012 Executive Office of the President National Science and Technology Council

  20. Webinar: Additive Manufacturing for Fuel Cells

    Energy.gov [DOE]

    Video recording and text version of the webinar titled "Additive Manufacturing for Fuel Cells," originally presented on February 11, 2014.