National Library of Energy BETA

Sample records for link system header

  1. Header Information

    National Nuclear Security Administration (NNSA)

    NRC 741 Crosswalk to SAMS 741 Field Number 741 Field Name SAMS 8.0 Field Header Information 1 Shipper's RIS ShipperRIS 2 Receiver's RIS ReceiverRIS 3 Transaction No. TransferNumber 4 Correction No. CorrectionNumber 5a Processing Code - Shipper * not entered 5b Processing Code - Receiver * not entered 6a Action Code - Shipper ActionCode 6b Action Code - Receiver ActionCode 8a Name and Address of Shipper * not entered 9a Name and Address of Receiver * not entered 10 No. of Data Lines NumberofLines

  2. Asynchronous broadcast for ordered delivery between compute nodes in a parallel computing system where packet header space is limited

    DOE Patents [OSTI]

    Kumar, Sameer

    2010-06-15

    Disclosed is a mechanism on receiving processors in a parallel computing system for providing order to data packets received from a broadcast call and to distinguish data packets received at nodes from several incoming asynchronous broadcast messages where header space is limited. In the present invention, processors at lower leafs of a tree do not need to obtain a broadcast message by directly accessing the data in a root processor's buffer. Instead, each subsequent intermediate node's rank id information is squeezed into the software header of packet headers. In turn, the entire broadcast message is not transferred from the root processor to each processor in a communicator but instead is replicated on several intermediate nodes which then replicated the message to nodes in lower leafs. Hence, the intermediate compute nodes become "virtual root compute nodes" for the purpose of replicating the broadcast message to lower levels of a tree.

  3. System design description for the SY-101 vent header flow element enclosure upgrades

    SciTech Connect (OSTI)

    Vargo, G.F.

    1995-11-01

    This document describes the design of the High and Low Range Vent Header Flow Element(s) Field Enclosure for the 241-SY-101 High Level Nuclear Waste Underground Storage Tank.

  4. Header design evaluation. Final report

    SciTech Connect (OSTI)

    Stubenhofer, R.L.

    1993-08-01

    An evaluation was conducted of two new six-pin header designs. This evaluation consisted of designing, evaluating, procuring, and building contact module subassemblies with each of the two designs. The study was initiated as a result of the high scrap costs associated with the current product design. Two new designs were found to be feasible alternative to the current design.

  5. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  6. Life assessment of high temperature headers

    SciTech Connect (OSTI)

    Nakoneczny, G.J.; Schultz, C.C.

    1995-08-01

    High temperature superheater and reheater headers have been a necessary focus of any boiler life extension project done by the electric utilities. These headers operate at high temperatures in excess of 900 F and are subject to thermal stresses and pressure stresses that can lead to cracking and failure. Babcock and Wilcox Company`s investigation of these problems began in 1982 focusing on P11 materials (1{1/4}Cr-{1/2}Mo). Early assessment was limited to dimensional analysis methods which were aimed at quantifying swell due to creep. Condition assessment and remaining useful life analysis methods have evolved since these initial studies. Experience coupled with improved inspection methods and analytical techniques has advanced the life assessment of these high temperature headers. In the discussion that follows the authors provide an overview of B and W`s approach to header life assessment including the location and causes for header failures, inspection techniques and analysis methods which are all directed at determining the remaining useful life of these high temperature headers.

  7. Glass ceramics for explosive device headers

    SciTech Connect (OSTI)

    Ballard, C. P.; Eagan, R. J.; Kjeldgaard, E. A.

    1980-01-01

    The desired features of a header for our advanced explosive devices include small size; 700 Mpa static burst strength; corrosion resistant alloys for electrodes, bridgewire, and housing; integral charge holder; high thermal conductivity (approaching that of alumina ceramic); no braze around the electrodes; design flexibility and quick turnaround time for fabrication of development prototypes; and low cost.

  8. GreenEnergy_header.jpg | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information GreenEnergy_header

  9. header_chamber.gif | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information header_chamber.gif

  10. 2014 refresh Science.Gov Announcements Header | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    refresh Science.Gov Announcements Header Science.gov USA.gov for SCIENCE Science.gov USA.gov for SCIENCE

  11. Abstract: Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header

    Energy.gov [DOE]

    This abstract highlights a project that will develop a single pass cut and chip harvesting system for short rotation woody crops that will improve the harvesting and logistic costs of processing woody crops.

  12. Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header

    SciTech Connect (OSTI)

    Eisenbies, Mark; Volk, Timothy; Abrahamson, Lawrence; Shuren, Richard; Stanton, Brian; Posselius, John; McArdle, Matt; Karapetyan, Samvel; Patel, Aayushi; Shi, Shun; Zerpa, Jose

    2014-10-03

    Biomass for biofuels, bioproducts and bioenergy can be sourced from forests, agricultural crops, various residue streams, and dedicated woody or herbaceous crops. Short rotation woody crops (SRWC), like willow and hybrid poplar, are perennial cropping systems that produce a number of environmental and economic development benefits in addition to being a renewable source of biomass that can be produced on marginal land. Both hybrid poplar and willow have several characteristics that make them an ideal feedstock for biofuels, bioproducts, and bioenergy; these include high yields that can be obtained in three to four years, ease of cultivar propagation from dormant cuttings, a broad underutilized genetic base, ease of breeding, ability to resprout after multiple harvests, and feedstock composition similar to other sources of woody biomass. Despite the range of benefits associated with SRWC systems, their deployment has been restricted by high costs, low market acceptance associated with inconsistent chip quality (see below for further explanation), and misperceptions about other feedstock characteristics (see below for further explanation). Harvesting of SRWC is the largest single cost factor (~1/3 of the final delivered cost) in the feedstock supply system. Harvesting is also the second largest input of primary fossil energy in the system after commercial N fertilizer, accounting for about one third of the input. Therefore, improving the efficiency of the harvesting system has the potential to reduce both cost and environmental impact. At the start of this project, we projected that improving the overall efficiency of the harvesting system by 25% would reduce the delivered cost of SRWC by approximately $0.50/MMBtu (or about $7.50/dry ton). This goal was exceeded over the duration of this project, as noted below.

  13. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, Layton C.

    1997-01-01

    An adjustable link for kinematic mounting systems. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two.

  14. Adjustable link for kinematic mounting systems

    DOE Patents [OSTI]

    Hale, L.C.

    1997-07-01

    An adjustable link for kinematic mounting systems is disclosed. The adjustable link is a low-cost, passive device that provides backlash-free adjustment along its single constraint direction and flexural freedom in all other directions. The adjustable link comprises two spheres, two sockets in which the spheres are adjustable retain, and a connection link threadly connected at each end to the spheres, to provide a single direction of restraint and to adjust the length or distance between the sockets. Six such adjustable links provide for six degrees of freedom for mounting an instrument on a support. The adjustable link has applications in any machine or instrument requiring precision adjustment in six degrees of freedom, isolation from deformations of the supporting platform, and/or additional structural damping. The damping is accomplished by using a hollow connection link that contains an inner rod and a viscoelastic separation layer between the two. 3 figs.

  15. A Thermo-Mechanical Analysis for a Nozzle Header of a Once-Through Steam Generator Designed for an Integral Reactor

    SciTech Connect (OSTI)

    Kim, YongWan; Kim, Dong Ok; Lee, Jae Seon; Kim, Jong In; Zee, Sung Quun [Korea Atomic Energy Research Institute, PO Box 105, YuSong, Taejon, 305-600 (Korea, Republic of)

    2004-07-01

    Thermo-mechanical behavior of the nozzle header of a steam generator developed for an integral reactor was investigated using experimental and finite element methods. The nozzle feedwater header suffers from severe thermal transient loadings during the operation of the nuclear reactor. The nozzle header is exposed to the low temperature inlet feedwater and the high temperature outlet superheated steam. The other side of the nozzle header is in contacts with the high temperature primary coolant. This temperature gradient results in high thermal stresses in the nozzle header structure. The thermal transient loading has been simulated in the test loop. The thermo-hydraulic parameters of the primary and the secondary system were controlled according to the operation mode programmed in the computer. Strain gauges and thermocouples attached at the highly stressed region monitored the thermo-mechanical behavior of the nozzle header. In parallel to the experimental study, the transient behavior of the nozzle header was simulated utilizing a commercial finite element code. The fluid temperature and the pressure obtained from the test loop were used for the input of the finite element analysis. As a result of this investigation, the thermo-mechanical load carrying capacity of the developed steam generator nozzle header was proved numerically and experimentally. (authors)

  16. Advances in slurry spray header design technology

    SciTech Connect (OSTI)

    Murphy, J.L.; Phillips, P.H.

    1995-06-01

    Due to the structure of the 1990 Clean Air Act Amendments, Absorbers for Phase I Compliance have been designed for larger capacities and absorbers with inlet flue gas volume ratings of 1.4 to 2.0 million acfm have become more typical. As a consequence, larger slurry recirculation pump designs have been developed (30,000 to 50,000 gpm) requiring large diameter spray headers with four (4) to five (5) inch slurry spray nozzles. This, in turn, has led to the development of special couplings to replace flanges for nozzle attachment, resulting in significant process, maintainability and economic advantages. A cost comparison of coupling versus the traditional flanged and screwed connections will be made along with the advantages and disadvantages of each of these choices. Additionally, full scale application experience will be reviewed.

  17. C++11 header files appear missing on Edison

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    C++11 header files appear missing on Edison C++11 header files appear missing on Edison December 3, 2014 by Scott French, NERSC USG Status: Reported to Cray (801693), Workaround available When using the default Intel compiler environment on Edison to compile C++11 code (-std=c++11), it appears that the associated header files cannot be found: edison03:~ > CC -std=c++11 test.cxx -o test.x test.cxx(2): catastrophic error: cannot open source file "chrono" #include <chrono> ^

  18. Distribution of air-water mixtures in parallel vertical channels as an effect of the header geometry

    SciTech Connect (OSTI)

    Marchitto, Annalisa; Fossa, Marco; Guglielmini, Giovanni

    2009-07-15

    Uneven phase distribution in heat exchangers is a cause of severe reductions in thermal performances of refrigeration equipment. To date, no general design rules are available to avoid phase separation in manifolds with several outlet channels, and even predicting the phase and mass distribution in parallel channels is a demanding task. In the present paper, measurements of two-phase air-water distributions are reported with reference to a horizontal header supplying 16 vertical upward channels. The effects of the operating conditions, the header geometry and the inlet port nozzle were investigated in the ranges of liquid and gas superficial velocities of 0.2-1.2 and 1.5-16.5 m/s, respectively. Among the fitting devices used, the insertion of a co-axial, multi-hole distributor inside the header confirmed the possibility of greatly improving the liquid and gas flow distribution by the proper selection of position, diameter and number of the flow openings between the supplying distributor and the system of parallel channels connected to the header. (author)

  19. Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Useful Links BIOSYNC: Structural Biology Synchrotron Users Organization X-ray Anomalous Scattering Going MAD at CHESS Protein Data Bank International Union of Crystallography ...

  20. Document creation, linking, and maintenance system

    SciTech Connect (OSTI)

    Claghorn, Ronald

    2011-02-15

    A document creation and citation system designed to maintain a database of reference documents. The content of a selected document may be automatically scanned and indexed by the system. The selected documents may also be manually indexed by a user prior to the upload. The indexed documents may be uploaded and stored within a database for later use. The system allows a user to generate new documents by selecting content within the reference documents stored within the database and inserting the selected content into a new document. The system allows the user to customize and augment the content of the new document. The system also generates citations to the selected content retrieved from the reference documents. The citations may be inserted into the new document in the appropriate location and format, as directed by the user. The new document may be uploaded into the database and included with the other reference documents. The system also maintains the database of reference documents so that when changes are made to a reference document, the author of a document referencing the changed document will be alerted to make appropriate changes to his document. The system also allows visual comparison of documents so that the user may see differences in the text of the documents.

  1. High-R Walls for New Construction Structural Performance: Integrated Rim Header Testing

    SciTech Connect (OSTI)

    DeRenzis, A.; Kochkin, V.; Wiehagen, J.

    2013-01-01

    Two prominent approaches within the Building America Program to construct higher R-value walls have included use of larger dimension framing and exterior rigid foam insulation. These approaches have been met with some success; however for many production builders, where the cost of changing framing systems is expensive, the changes have been slow to be realized. In addition, recent building code changes have raised some performance issues for exterior sheathing and raised heel trusses, for example, that indicates a need for continued performance testing for wall systems. The testing methods presented in this report evaluate structural rim header designs over openings up to 6 ft wide and applicable to one- and two-story homes.

  2. Determining the Cause of a Header Failure in a Natural Gas Production Facility

    SciTech Connect (OSTI)

    Matthes, S.A.; Covino, B.S., Jr.; Bullard, S.J.; Ziomek-Moroz, M.; Holcomb, G.R.

    2007-03-01

    An investigation was made into the premature failure of a gas-header at the Rocky Mountain Oilfield Testing Center (RMOTC) natural gas production facility. A wide variety of possible failure mechanisms were considered: design of the header, deviation from normal pipe alloy composition, physical orientation of the header, gas composition and flow rate, type of corrosion, protectiveness of the interior oxide film, time of wetness, and erosion-corrosion. The failed header was examined using metallographic techniques, scanning electron microscopy, and microanalysis. A comparison of the failure site and an analogous site that had not failed, but exhibited similar metal thinning was also performed. From these studies it was concluded that failure resulted from erosion-corrosion, and that design elements of the header and orientation with respect to gas flow contributed to the mass loss at the failure point.

  3. Shape optimized headers and methods of manufacture thereof

    SciTech Connect (OSTI)

    Perrin, Ian James

    2013-11-05

    Disclosed herein is a shape optimized header comprising a shell that is operative for collecting a fluid; wherein an internal diameter and/or a wall thickness of the shell vary with a change in pressure and/or a change in a fluid flow rate in the shell; and tubes; wherein the tubes are in communication with the shell and are operative to transfer fluid into the shell. Disclosed herein is a method comprising fixedly attaching tubes to a shell; wherein the shell is operative for collecting a fluid; wherein an internal diameter and/or a wall thickness of the shell vary with a change in pressure and/or a change in a fluid flow rate in the shell; and wherein the tubes are in communication with the shell and are operative to transfer fluid into the shell.

  4. Pyrolysis of epoxies used for thermal-battery headers

    SciTech Connect (OSTI)

    Guidotti, R.A.; Thornberg, S.M.; Campbell-Domme, B.

    1995-08-01

    Thermally activated batteries use an epoxy for encapsulation of the electrical feedthroughs in the header of the battery. When the thermal battery is thermally abused, the encapsulant can pyrolyze and generate large internal pressures. This causes the battery to vent in extreme cases. The nature of these gases has never been adequately documented. Therefore, a study was undertaken to address this deficiency. The pyrolysis of various encapsulants that have been used, or are being considered for use, in thermally activated batteries was studied over a temperature range of 155 to 455 C. The composition of the pyrolysis decomposition products was determined by gas chromatography/mass spectrometry (GS/MS). This determination is helpful in assessing the potential environmental and health effect for personnel exposed to such gases. In addition, the thermal stability of the various epoxies was measured by thermogravimetric analysis (TGA).

  5. links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Useful Links Other Cyclotrons National Superconducting Cyclotron Laboratory at Michigan State Univeristy Indiana University Cyclotron Facility Cyclotron Research Centre at Louvain 88" Cyclotron at Lawrence Berkley National Lab Department of Energy National Labs Brookhaven National Laboratory Lawrence Berkeley National Laboratory Fermi National Accelerator Laboratory Los Alamos National Laboratory Sandia National Laboratories Ames Laboratory Pacific Northwest National Laboratory Oak Ridge

  6. High performance control of harmonic instability from HVDC link system

    SciTech Connect (OSTI)

    Min, W.K.; Yoo, M.H.

    1995-12-31

    This paper investigates the usefulness of novel control method for HVDC link system which suffers from severe condition of low order harmonic. This control scheme is used the feedforward control method which is directly controlled dc current at dc link system. The studies of this paper are aimed to improving the dynamic response of HVdc link system in disturbances such as faults. To achieve those objectives, digital time domain simulations are employed by the electro magnetic transient program for dc system (EMTDC). This method results in stable recovery from faults at both rectifier and inverter terminal busbars for a HVdc system that is inherently unstable. It has been found to be robust and control performance has been enhanced.

  7. Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links: CAMD's SAXS beamline sister page By Derek Dorman General Reference: Glatter and Kratky Small Angle X-ray Scattering Book (subject to the permission letter and terms of use) SAXS Presentation by Jianhua Li SAXS Presentation by John Pople Dr. Brian Grady's Polymer Characterization Group SAXS page Jun, Y., Waychunas, G. "Molecular-Level Investigations of Nucleation Mechanisms and Kinetics of Formation of Environmental Nanoparticles" Poster SAXS Analysis/Simulation: Paul Scherrer

  8. Reliability assessment of autonomous power systems incorporating HVDC interconnection links

    SciTech Connect (OSTI)

    Dialynas, E.N.; Koskolos, N.C.; Agoris, D.

    1996-01-01

    The objective of this paper is to present an improved computational method for the overall reliability assessment of autonomous power systems that may or may not contain HVdc interconnection links. This is a hybrid method based on a Monte-Carlo simulation sequential approach which incorporates an analytical approach for the reliability modeling of the HVdc transmission links. The developed models and techniques have been implemented into a computer program that can be used to simulate the operational practices and characteristics of the overall system under study efficiently and realistically. A set of reliability indices are calculated for each load-point of interest and the entire system while a set of additional indices is calculated for quantifying the reliability performance of the interconnection links under the specified operating requirements. The analysis of a practical system is also included for a number of studies representing its various operating and design characteristics.

  9. Optimization of creep properties of welded header-stub tube connection for lif extension

    SciTech Connect (OSTI)

    Ram, R.; Cunningham, G.; Roberts, B.

    1996-12-31

    The failure of boiler tubes is the predominant cause of boiler outages. From a life-extension point of view, the critical components are large diameter thick-wall high-temperature headers. The primary aim of this research is to numerically analyze the stresses in the boiler tube-header weld connection and study the behavior of the material as it creeps. The focus is on the initial thermoelastic stresses at the beginning of operation and the distribution of stresses after approximately twenty years of operation when the stresses have relaxed. The study calculates creep life fractions of the assembly after twenty years of service.

  10. Adding Links in Energy.gov Content Management System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy.gov Content Management System » Adding Links in Energy.gov Content Management System Adding Links in Energy.gov Content Management System For Office of Energy Efficiency and Renewable Energy (EERE) websites, to add a link in the Energy.gov Drupal content management system (CMS), follow these steps: Edit the page (also called a node) that you want to add a link to. Select the text you want to link. Click the "Link" button. Then: If you are linking to a page on Energy.gov, select

  11. IAEA Verification Experiment at the Portsmouth Gaseous Diffusion Plant: Report on the Cascade Header Enrichment Monitor

    SciTech Connect (OSTI)

    P. L. Kerr; D. A. Close; W. S. Johnson; R. M. Kandarian; C. E. Moss; C. D. Romero

    1999-03-01

    The authors describe the Cascade Header Enrichment Monitor (CHEM) for the Portsmouth Gaseous Diffusion Plant at Piketon, Ohio, and present the calibration and measurement results. The US government has offered excess fissile material that is no longer needed for defense purposes for International Atomic Energy Agency (IAEA) inspection. Measurement results provided by the CHEM were used by the IAEA in a verification experiment to provide confidence that the US successfully blended excess highly enriched uranium (HEU) down to low enriched uranium (LEU). The CHEM measured the uranium enrichment in two cascade header pipes, a 20.32-cm HEU pipe and a 7.62-cm product LEU pipe. The CHEM determines the amount of {sup 235}U from the 185.7-keV gamma-ray photopeak and the amount of total uranium by x-ray fluorescence (XRF) of the 98.4-keV x-ray from uranium with a {sup 57}Co XRF source. The ratio yields the enrichment. The CHEM consists of a collimator assembly, an electromechanically cooled germanium detector, and a rack-mounted personal computer running commercial and custom software. The CHEM was installed in December 1997 and was used by the IAEA inspectors for announced and unannounced inspections on the HEU and LEU header pipes through October 1998. The equipment was sealed with tamper-indicating enclosures when the inspectors were not present.

  12. Please join us for a triple-header seminar organized around Modeling RNA

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and Protein/RNA Complexes | Stanford Synchrotron Radiation Lightsource Please join us for a triple-header seminar organized around Modeling RNA and Protein/RNA Complexes Tuesday, November 13, 2012 - 11:15am SSRL, Bldg. 137-322 Speakers: Julie Bernauer, Debanu Das & Dimitar Pachov Program Description: 11:15-11:45 Julie Bernauer (INRIA AMIB Bioinfo) Multi-scale modeling for RNA structures: a challenge 11:45-12:00 Debanu Das (SSRL JSCG) Progress on HT-SB of Protein/Nucleic Acid complexes at

  13. Failures and repairs of headers and drums in fossil fired boilers

    SciTech Connect (OSTI)

    Thielsch, H.; Cone, F.

    1995-12-01

    This paper discusses failures which have occurred in a number of thick-walled pressure vessels including superheater and reheat outlet headers, and med and steam drums in fossil fired boilers. It provides details regarding the causes of failure, which range from original manufacturing defects to service-related deterioration such as creep and thermal fatigue. It also provides information regarding inspection techniques which are capable of detecting similar conditions before they have reached dangerous levels of deterioration. Finally, it provides details pertaining to techniques used to successfully repair these pressure vessels when they have failed.

  14. FRAMES Software System: Linking to the Statistical Package R

    SciTech Connect (OSTI)

    Castleton, Karl J.; Whelan, Gene; Hoopes, Bonnie L.

    2006-12-11

    This document provides requirements, design, data-file specifications, test plan, and Quality Assurance/Quality Control protocol for the linkage between the statistical package R and the Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) Versions 1.x and 2.0. The requirements identify the attributes of the system. The design describes how the system will be structured to meet those requirements. The specification presents the specific modifications to FRAMES to meet the requirements and design. The test plan confirms that the basic functionality listed in the requirements (black box testing) actually functions as designed, and QA/QC confirms that the software meets the client’s needs.

  15. Embedded calibration system for the DIII-D Langmuir probe analog fiber optic links

    SciTech Connect (OSTI)

    Watkins, J. G. [Sandia National Laboratories, Livermore, California (United States); Rajpal, R.; Mandaliya, H. [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat (India); Watkins, M.; Boivin, R. L. [General Atomics, San Diego, California (United States)

    2012-10-15

    This paper describes a generally applicable technique for simultaneously measuring offset and gain of 64 analog fiber optic data links used for the DIII-D fixed Langmuir probes by embedding a reference voltage waveform in the optical transmitted signal before every tokamak shot. The calibrated data channels allow calibration of the power supply control fiber optic links as well. The array of fiber optic links and the embedded calibration system described here makes possible the use of superior modern data acquisition electronics in the control room.

  16. Protecting a HVDC link against accidental isolation from its receiving AC system

    SciTech Connect (OSTI)

    Whitehouse, R.S. )

    1993-07-01

    When an HVdc scheme is isolated from its receiving ac system, the inverter may continue to operate, generating its own ac bus voltages; this is defined here as islanding. If islanding is allowed to continue unrestricted, then main circuit components may in some conditions be damaged and it is therefore necessary to provide a suitable protection system. This paper outlines the protection scheme developed for the McNeill Back-to-Back HVdc link in Alberta, Canada, to prevent damage due to islanding while still permitting the link to automatically restart on reclosure of the isolating breaker. Oscillograms showing the protection in operation on both the GEC ALSTHOM HVdc simulator and during tests carried out as part of the commissioning of the McNeill HV dc link are included.

  17. Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

    SciTech Connect (OSTI)

    Diakov, Victor; Cole, Wesley; Sullivan, Patrick; Brinkman, Gregory; Margolis, Robert

    2015-11-01

    Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

  18. Enhanced visible and near-infrared capabilities of the JET mirror-linked divertor spectroscopy system

    SciTech Connect (OSTI)

    Lomanowski, B. A. Sharples, R. M.; Meigs, A. G.; Conway, N. J.; Zastrow, K.-D.; Heesterman, P.; Kinna, D. [EURATOM Collaboration: JET-EFDA Team

    2014-11-15

    The mirror-linked divertor spectroscopy diagnostic on JET has been upgraded with a new visible and near-infrared grating and filtered spectroscopy system. New capabilities include extended near-infrared coverage up to 1875 nm, capturing the hydrogen Paschen series, as well as a 2 kHz frame rate filtered imaging camera system for fast measurements of impurity (Be II) and deuterium D?, D?, D? line emission in the outer divertor. The expanded system provides unique capabilities for studying spatially resolved divertor plasma dynamics at near-ELM resolved timescales as well as a test bed for feasibility assessment of near-infrared spectroscopy.

  19. A Parametric Study of a Large Break in Reactor Inlet Header of CANDU6 Reactors Using RELAP5 Code

    SciTech Connect (OSTI)

    Prisecaru, Ilie; Dupleac, Daniel; Ghitescu, Petre; Biro, Lucian

    2006-07-01

    A large break loss of coolant accident in a CANDU can lead to degraded fuel cooling in a large number of fuel channels due to the apparition of a prolonged flow stagnation period in the downstream core pass. The paper presents a parametric study of a reactor inlet header break. The parametric survey includes: the size of the break, the choked flow model employed, the emergency core cooling (ECC) performance and the core nodalization. The study is performed with RELAP5/SCDAP mod 3.4 and the results are compared with the safety analysis results. (authors)

  20. EIA - Natural Gas Pipeline System - Links to U.S. Natural Gas...

    U.S. Energy Information Administration (EIA) (indexed site)

    Links About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Links to U.S. Natural Gas Pipeline Information - The links ...

  1. Linking home energy rating systems with energy efficiency financing: Progress on national and state programs

    SciTech Connect (OSTI)

    Farhar, B.C.; Collins, N.E.; Walsh, R.W.

    1996-10-01

    In 1991 and early 1992, the U.S. Department of Energy (DOE), in cooperation with the U.S. Department of Housing and Urban Development (HUD), established a National Collaborative on Home Energy Rating Systems (HERS) and Energy Efficient Mortgages (EEMs). The Collaborative's purpose was to involve stakeholders at a national policy level to develop a plan leading the nation toward a voluntary system linking HERS with EEMs. The National Renewable Energy Laboratory (NREL) coordinated the National Collaborative's meetings for DOE. Composed of representatives from 25 stakeholder organizations, the Collaborative, after some 14 meetings, reached consensus on two documents, both published by NREL in mg 1992: A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action and Going National with HERS and EEMs: Issues and Impacts, The Collected Papers of the National Collaborative.

  2. MIDC: Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links Other Data Collection Activities Baseline Surface Radiation Network (BSRN) Clear Sky Forcast for NREL/SRRL (or other locations) Colorado Dept. of Public Health & Environment: Air Quality Index (AQI) Reporting System Colorado State University: USDA UV-B Monitoring and Research Program European Skynet Radiometers network (ESR) Jefferson County, Colorado: Jeffco Weather Station NOAA: Climate Monitoring & Diagnostics Laboratory (CMDL) NREL OTF: Reference Meteorological and Irradiance

  3. High-R Walls for New Construction Structural Performance: Integrated Rim Header Testing

    SciTech Connect (OSTI)

    DeRenzis, A.; Kochkin, V.; Wiehagen, J.

    2013-01-01

    Two prominent approaches within the Building America Program to construct higher R-value walls have included use of larger dimension framing and exterior rigid foam insulation. These approaches have been met with some success; however for many production builders, where the cost of changing framing systems is expensive, the changes have been slow to be realized. In addition, recent building code changes have raised some performance issues for exterior sheathing and raised heel trusses, for example, that indicates a need for continued performance testing for wall systems.

  4. Autonomous grain combine control system

    SciTech Connect (OSTI)

    Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

    2013-06-25

    A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

  5. WIPP Home Page header

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    any warranty, express or implied, including the warranties of merchantability and fitness for a particular purpose. Nor do they assume any legal liability or responsibility...

  6. HELPFUL LINKS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Helpful Links HELPFUL LINKS Caution: Many of the links listed below are outside of the DOE Idaho Operations Office, (DOE-ID) Internet site and are not under our control. They have been provided as a convenience to you. DOE-ID is not responsible for the content of linked sites or any link contained in those sites. It is up to the individual user to protect themselves and to take adequate precaution against possible damages resulting from linked sites. Science.gov Communications Page Defense

  7. Cool Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Cool Links Cool Links Can't get enough science? Click on these links to learn more about science and innovations at the Lab and beyond! Science and learning activities Los Alamos National Laboratory links Bradbury Science Museum video The Town That Never Was Bradbury Science Museum video Heritage of Science (Stockpile Stewardship) Los Alamos National Laboratory Homepage A list of Los Alamos National Laboratory publications Los Alamos National Laboratory's periodic table website Los Alamos

  8. Methodology for integration of HVDC links in large ac systems. Phase I. Reference manual. Final report

    SciTech Connect (OSTI)

    Meredith, R.J.

    1983-03-01

    HVDC transmission has been found to be an attractive alternative to ac transmission in many situations. Evaluations of HVDC alternatives include technical, economic, environmental and sometimes regulatory considerations which are different than those for ac transmission. This research project resulted in the preparation of a HVDC reference manual which describes a comprehensive methodology for evaluating HVDC alternatives in utility transmission planning. It provides basic background information about existing HVDC systems. It describes the types of studies required and potential problems which must be dealt with. It also discusses how the studies are usually run and what system modeling is required. It emphasizes the importance of proper control of the dc system and provides examples of control systems which have been used.

  9. A NEW ACCRETION DISK AROUND THE MISSING LINK BINARY SYSTEM PSR J1023+0038

    SciTech Connect (OSTI)

    Patruno, A.; Archibald, A. M.; Hessels, J. W. T.; Bassa, C. G.; Janssen, G. H.; Bogdanov, S.; Stappers, B. W.; Lyne, A. G.; Kaspi, V. M.; Tendulkar, S.

    2014-01-20

    PSR J1023+0038 is an exceptional system for understanding how slowly rotating neutron stars are spun up to millisecond rotational periods through accretion from a companion star. Observed as a radio pulsar from 2007-2013, optical data showed that the system had an accretion disk in 2000/2001. Starting at the end of 2013 June, the radio pulsar has become undetectable, suggesting a return to the previous accretion-disk state, where the system more closely resembles an X-ray binary. In this Letter we report the first targeted X-ray observations ever performed of the active phase and complement them with UV/optical and radio observations collected in 2013 October. We find strong evidence that indeed an accretion disk has recently formed in the system and we report the detection of fast X-ray changes spanning about two orders of magnitude in luminosity. No radio pulsations are seen during low flux states in the X-ray light curve or at any other times.

  10. DANDE: a linked code system for core neutronics/depletion analysis

    SciTech Connect (OSTI)

    LaBauve, R.J.; England, T.R.; George, D.C.; MacFarlane, R.E.; Wilson, W.B.

    1985-06-01

    This report describes DANDE - a modular neutronics, depletion code system for reactor analysis. It consists of nuclear data processing, core physics, and fuel depletion modules, and allows one to use diffusion and transport methods interchangeably in core neutronics calculations. This latter capability is especially important in the design of small modular cores. Additional unique features include the capability of updating the nuclear data file during a calculation; a detailed treatment of depletion, burnable poisons as well as fuel; and the ability to make geometric changes such as control rod repositioning and fuel relocation in the course of a calculation. The detailed treatment of reactor fuel burnup, fission-product creation and decay, as well as inventories of higher-order actinides is a necessity when predicting the behavior of reactor fuel under increased burn conditions. The operation of the code system is made clear in this report by following a sample problem.

  11. Fast prediction of transient stability margin in systems with SVC control and HVDC link

    SciTech Connect (OSTI)

    Tso, S.K.; Cheung, S.P.

    1995-12-31

    Recent developments in transient stability margin (TSM) prediction using the energy-based direct method have included excitation controllers, power system stabilizers (PSSs) and/or static VAr compensators (SVCs). These devices can be represented in their detailed dynamic models to desired degrees of complexity while the proposed extended equal-area criterion can still be effectively applied. This paper describes further development of this technique to incorporate an HVDC transmission into the test network for TSM prediction. The method is examined with a practical 17-machine power network representing the South China/Hong Kong system. An SVC control scheme is also installed in a weak bus of the test network for transient stability improvement. The results obtained show that there is no sacrifice in accuracy, speed or reliability of the TSM method with SVC and HVDC realistically incorporated into the study.

  12. Controlling harmonic instability of HVDC links connected to weak ac systems

    SciTech Connect (OSTI)

    Bodger, P.S. ); Irwin, G.D.; Woodford, D.A. )

    1990-10-01

    Time domain digital simulation of HVDC transmission enables harmonic stability of a system to be studied. This paper reports two alternative measures of controlling harmonic instability were investigated; the use of C-type ac filters and a simple addition of a harmonic damping circuit in the rectifier converter control. The design of a C-type filter is described and its effectiveness presented. Harmonic damping by controls consists of taking the output from a fast response dc current transducer, passing it through a filter and a gain and adding the output to the firing angle order. Both methods result in stable recovery from faults at both rectifier and inverter terminal busbars for a dc system inherently harmonically unstable.

  13. Links - SRSCRO

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links Links Links Surplus Equipment Bolin Marketing Group | www.bmgsurplus.com Counties of the SRSCRO Region Aiken County | www.aikencounty.net Allendale County | www.allendalecounty.com Barnwell County | www.barnwellcounty.sc.gov Columbia County | www.columbiacountyga.gov Richmond County | www.augustaga.gov Chambers of Commerce Aiken SC | www.aikenchamber.net Augusta, GA | www.augustagausa.com Barnwell, SC | www.barnwellcountychamber.org Columbia County, GA | www.columbiacountychamber.com North

  14. External Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    External Links External Links This page contains links to web sites and pages having to do with the Federal Energy Technology Network, Department of Energy, and Energy related Internet resources. The information is divided into the following categories: Table of Contents Department of Energy Support Offices Within the Department of Energy Office of Small & Disadvantaged Business Utilization (OSDBU) General Information Sources about Government Non-Government Energy and Environmental Related

  15. On linking an Earth system model to the equilibrium carbon representation of an economically optimizing land use model

    SciTech Connect (OSTI)

    Bond-Lamberty, Benjamin; Calvin, Katherine V.; Jones, Andrew D.; Mao, Jiafu; Patel, Pralit L.; Shi, Xiaoying; Thomson, Allison M.; Thornton, Peter E.; Zhou, Yuyu

    2014-01-01

    Human activities are significantly altering biogeochemical cycles at the global scale, posing a significant problem for earth system models (ESMs), which may incorporate static land-use change inputs but do not actively simulate policy or economic forces. One option to address this problem is a to couple an ESM with an economically oriented integrated assessment model. Here we have implemented and tested a coupling mechanism between the carbon cycles of an ESM (CLM) and an integrated assessment (GCAM) model, examining the best proxy variables to share between the models, and quantifying our ability to distinguish climate- and land-use-driven flux changes. CLMs net primary production and heterotrophic respiration outputs were found to be the most robust proxy variables by which to manipulate GCAMs assumptions of long-term ecosystem steady state carbon, with short-term forest production strongly correlated with long-term biomass changes in climate-change model runs. By leveraging the fact that carbon-cycle effects of anthropogenic land-use change are short-term and spatially limited relative to widely distributed climate effects, we were able to distinguish these effects successfully in the model coupling, passing only the latter to GCAM. By allowing climate effects from a full earth system model to dynamically modulate the economic and policy decisions of an integrated assessment model, this work provides a foundation for linking these models in a robust and flexible framework capable of examining two-way interactions between human and earth system processes.

  16. Enhancing the role of veterinary vaccines reducing zoonotic diseases of humans: Linking systems biology with vaccine development

    SciTech Connect (OSTI)

    Adams, Leslie G.; Khare, Sangeeta; Lawhon, Sara D.; Rossetti, Carlos A.; Lewin, Harris A.; Lipton, Mary S.; Turse, Joshua E.; Wylie, Dennis C.; Bai, Yu; Drake, Kenneth L.

    2011-09-22

    The aim of research on infectious diseases is their prevention, and brucellosis and salmonellosis as such are classic examples of worldwide zoonoses for application of a systems biology approach for enhanced rational vaccine development. When used optimally, vaccines prevent disease manifestations, reduce transmission of disease, decrease the need for pharmaceutical intervention, and improve the health and welfare of animals, as well as indirectly protecting against zoonotic diseases of people. Advances in the last decade or so using comprehensive systems biology approaches linking genomics, proteomics, bioinformatics, and biotechnology with immunology, pathogenesis and vaccine formulation and delivery are expected to enable enhanced approaches to vaccine development. The goal of this paper is to evaluate the role of computational systems biology analysis of host:pathogen interactions (the interactome) as a tool for enhanced rational design of vaccines. Systems biology is bringing a new, more robust approach to veterinary vaccine design based upon a deeper understanding of the host pathogen interactions and its impact on the host's molecular network of the immune system. A computational systems biology method was utilized to create interactome models of the host responses to Brucella melitensis (BMEL), Mycobacterium avium paratuberculosis (MAP), Salmonella enterica Typhimurium (STM), and a Salmonella mutant (isogenic *sipA, sopABDE2) and linked to the basis for rational development of vaccines for brucellosis and salmonellosis as reviewed by Adams et al. and Ficht et al. [1,2]. A bovine ligated ileal loop biological model was established to capture the host gene expression response at multiple time points post infection. New methods based on Dynamic Bayesian Network (DBN) machine learning were employed to conduct a comparative pathogenicity analysis of 219 signaling and metabolic pathways and 1620 gene ontology (GO) categories that defined the host's biosignatures

  17. New wholesale power market design using linked forward markets : a study for the DOE energy storage systems program.

    SciTech Connect (OSTI)

    Silva Monroy, Cesar Augusto; Loose, Verne William; Ellison, James F.; Elliott, Ryan Thomas; Byrne, Raymond Harry; Guttromson, Ross; Tesfatsion, Leigh S.

    2013-04-01

    This report proposes a reformulation of U.S. ISO/RTO-managed wholesale electric power mar- kets for improved reliability and e ciency of system operations. Current markets do not specify or compensate primary frequency response. They also unnecessarily limit the participation of new technologies in reserve markets and o er insu cient economic inducements for new capacity invest- ment. In the proposed market reformulation, energy products are represented as physically-covered rm contracts and reserve products as physically-covered call option contracts. Trading of these products is supported by a backbone of linked ISO/RTO-managed forward markets with planning horizons ranging from multiple years to minutes ahead. A principal advantage of this reformulation is that reserve needs can be speci ed in detail, and resources can o er the services for which they are best suited, without being forced to conform to rigid reserve product de nitions. This should improve the business case for electric energy storage and other emerging technologies to provide reserve. In addition, the facilitation of price discovery should help to ensure e cient energy/reserve procurement and adequate levels of new capacity investment.

  18. MO-E-17A-01: BEST IN PHYSICS (IMAGING) - Calculating SSDE From CT Exams Using Size Data Available in the DICOM Header of CT Localizer Radiographs

    SciTech Connect (OSTI)

    McMillan, K; Bostani, M; McNitt-Gray, M; McCollough, C

    2014-06-15

    Purpose: To demonstrate the feasibility of using existing data stored within the DICOM header of certain CT localizer radiographs as a patient size metric for calculating CT size-specific dose estimates (SSDE). Methods: For most Siemens CT scanners, the CT localizer radiograph (topogram) contains a private DICOM field that stores an array of numbers describing AP and LAT attenuation-based measures of patient dimension. The square root of the product of the AP and LAT size data, which provides an estimate of water-equivalent-diameter (WED), was calculated retrospectively from topogram data of 20 patients who received clinically-indicated abdomen/pelvis (n=10) and chest (n=10) scans (WED-topo). In addition, slice-by-slice water-equivalent-diameter (WED-image) and effective diameter (ED-image) values were calculated from the respective image data. Using TG-204 lookup tables, size-dependent conversion factors were determined based upon WED-topo, WED-image and ED-image values. These conversion factors were used with the reported CTDIvol to calculate slice-by-slice SSDE for each method. Averaging over all slices, a single SSDE value was determined for each patient and size metric. Patientspecific SSDE and CTDIvol values were then compared with patientspecific organ doses derived from detailed Monte Carlo simulations of fixed tube current scans. Results: For abdomen/pelvis scans, the average difference between liver dose and CTDIvol, SSDE(WED-topo), SSDE(WED-image), and SSDE(ED-image) was 18.70%, 8.17%, 6.84%, and 7.58%, respectively. For chest scans, the average difference between lung dose and CTDIvol, SSDE(WED-topo), SSDE(WED-image), and SSDE(ED-image) was 25.80%, 3.33%, 4.11%, and 7.66%, respectively. Conclusion: SSDE calculated using WED derived from data in the DICOM header of the topogram was comparable to SSDE calculated using WED and ED derived from axial images; each of these estimated organ dose to within 10% for both abdomen/pelvis and chest CT examinations

  19. Method and apparatus for routing data in an inter-nodal communications lattice of a massively parallel computer system by dynamic global mapping of contended links

    DOE Patents [OSTI]

    Archer, Charles Jens; Musselman, Roy Glenn; Peters, Amanda; Pinnow, Kurt Walter; Swartz, Brent Allen; Wallenfelt, Brian Paul

    2011-10-04

    A massively parallel nodal computer system periodically collects and broadcasts usage data for an internal communications network. A node sending data over the network makes a global routing determination using the network usage data. Preferably, network usage data comprises an N-bit usage value for each output buffer associated with a network link. An optimum routing is determined by summing the N-bit values associated with each link through which a data packet must pass, and comparing the sums associated with different possible routes.

  20. Links - MST - UW Plasma Physics

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links UW Madison Madison Symmetric Torus Links MST HomeGraduate Student InformationLinksTourControl and Auxiliary SystemsPhysics TopicsDeviceResearch MissionMST People mst logo CPLA Home Directory Publications Links Internal University of Wisconsin Physics Department Research funding includes support from: Department of Energy National Science Foundation Other Reversed Field Pinch Experiments around the world: RFX-mod in Padua, Italy Extrap-T2R in Stockhom, Sweden RELAX at Kyoto Institute of

  1. Integral collector storage system with heat exchange apparatus

    DOE Patents [OSTI]

    Rhodes, Richard O.

    2004-04-20

    The present invention relates to an integral solar energy collector storage systems. Generally, an integral collector storage system includes a tank system, a plurality of heat exchange tubes with at least some of the heat exchange tubes arranged within the tank system, a first glazing layer positioned over the tank system and a base plate positioned under the tank system. In one aspect of the invention, the tank system, the first glazing layer an the base plate each include protrusions and a clip is provided to hold the layers together. In another aspect of the invention, the first glazing layer and the base plate are ribbed to provide structural support. This arrangement is particularly useful when these components are formed from plastic. In yet another aspect of the invention, the tank system has a plurality of interconnected tank chambers formed from tubes. In this aspect, a supply header pipe and a fluid return header pipe are provided at a first end of the tank system. The heat exchange tubes have inlets coupled to the supply header pipe and outlets coupled to the return header pipe. With this arrangement, the heat exchange tubes may be inserted into the tank chambers from the first end of the tank system.

  2. Ignitor with stable low-energy thermite igniting system

    SciTech Connect (OSTI)

    Kelly, M.D.; Munger, A.C.

    1989-08-08

    A stable compact low-energy igniting system in an ignitor utilizes two components, an initiating charge and an output charge. The initiating charge is a thermite in ultra-fine powder form compacted to 50--70% of theoretical maximum density and disposed in a cavity of a header of the ignitor adjacent to an electrical ignition device, or bridgewire, mounted in the header cavity. The initiating charge is ignitable by operation of the ignition device in a hot-wire mode. The output charge is a thermite in high-density consolidated form compacted to 90--99% of theoretical maximum density and disposed adjacent to the initiating charge on an opposite end thereof from the electrical ignition device and ignitable by the initiating charge. A sleeve is provided for mounting the output charge to the ignitor header with the initiating charge confined therebetween in the cavity. 1 fig.

  3. Ignitor with stable low-energy thermite igniting system

    SciTech Connect (OSTI)

    Kelly, Michael D.; Munger, Alan C.

    1991-02-05

    A stable compact low-energy igniting system in an ignitor utilizes two components, an initiating charge and an output charge. The initiating charge is a thermite in ultra-fine powder form compacted to 50-70% of theoretical maximum density and disposed in a cavity of a header of the ignitor adjacent to an electrical ignition device, or bridgewire, mounted in the header cavity. The initiating charge is ignitable by operation of the ignition device in a hot-wire mode. The output charge is a thermite in high-density consoladated form compacted to 90-99% of theoretical maximum density and disposed adjacent to the initiating charge on an opposite end thereof from the electrical ignition device and ignitable by the initiating charge. A sleeve is provided for mounting the output charge to the ignitor header with the initiating charge confined therebetween in the cavity.

  4. Steam System Modeler | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technical Assistance » Steam System Modeler Steam System Modeler April 17, 2014 - 11:34am Addthis There is often flexibility in the operational conditions and requirements of any steam system. In order to optimize performance, the impacts of potential adjustments need to be understood individually and collectively. The Steam System Modeler allows you to create up to a 3-pressure-header basic model of your current steam system. A second model can then be created by adjusting a series of

  5. Protective link for superconducting coil

    DOE Patents [OSTI]

    Umans, Stephen D.

    2009-12-08

    A superconducting coil system includes a superconducting coil and a protective link of superconducting material coupled to the superconducting coil. A rotating machine includes first and second coils and a protective link of superconducting material. The second coil is operable to rotate with respect to the first coil. One of the first and second coils is a superconducting coil. The protective link is coupled to the superconducting coil.

  6. E-Link - Disclaimer

    Office of Scientific and Technical Information (OSTI)

    Javascript Not Enabled OSTI Security Website Policies and Important Links

  7. Active dc filter for HVDC system--A test installation in the Konti-Skan DC link at Lindome converter station

    SciTech Connect (OSTI)

    Zhang, Wenyan; Asplund, G. . HVDC Division); Aberg, A. . Dept. of Man-Machine Communication); Jonsson, U. ); Loeoef, O. . Region Vaestsverige)

    1993-07-01

    The purpose of introducing active dc filters is to meet the more and more stringent requirement from power utilities on limiting telephone interference caused by harmonic currents from HVdc transmission lines, without unnecessarily increasing the cost of HVdc stations. An active dc filter installed in the Konti-Skan HVdc link is described. The active dc filter is connected at the bottom of an existing passive dc filter at the Lindome station. The active dc filter includes optic harmonic current measuring unit, control system, protection and supervision system, PWM power amplifier, high-frequency transformer, surge arrester, and coupling apparatuses. The active dc filter has small physical size and occupies small ground area. The performance of the active dc filter for eliminating the disturbing harmonics is excellent. To achieve comparable results by passive filters would require something like ten times more high voltage equipment.

  8. Electro-mechanical energy conversion system having a permanent magnet machine with stator, resonant transfer link and energy converter controls

    DOE Patents [OSTI]

    Skeist, S. Merrill; Baker, Richard H.

    2006-01-10

    An electro-mechanical energy conversion system coupled between an energy source and an energy load comprising an energy converter device including a permanent magnet induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer to control the flow of power or energy through the permanent magnetic induction machine.

  9. Preparation of a Magnetically Switchable Bioelectrocatalytic System Employing Cross-Linked Enzyme Aggregates in Magnetic Mesocellular Carbon Foam

    SciTech Connect (OSTI)

    Lee, Jinwoo; Lee, Dohun; Oh, Eunkeu; Kim, Jaeyun; Kim, Young-Pil; Jin, Sunmi; Kim, Hak Sung; Hwang, Yosun; Kwak, Ja Hun; Park, Je-Geun; Shin, Chae-Ho; Kim, Jungbae; Hyeon, Taeghwan

    2005-11-18

    Nanostructured magnetic materials (NMMs)[1] have attracted much attention recently because of their broad biotechnological applications including support matrices for enzyme immobilization,[2] immunoassays,[3] drug delivery,[4] and biosensors.[ 5] Specifically, the easy separation and controlled placement of NMMs by means of an external magnetic field enables their application in the development of immobilized enzyme processes[2] and the construction of magnetically controllable bio-electrocatalytic systems.[5, 6] Herein, we demonstrate the use of immobilized enzymes in NMMs for magnetically switchable bio-electrocatalysis.

  10. Energy Efficiency Links

    U.S. Energy Information Administration (EIA) (indexed site)

    Energy Efficiency Organizations Energy Efficiency Organizations Release Date: October 1999 Last Updated: Septembert 2009 EIA Links Disclaimer: These pages contain hypertext links...

  11. MicroLink Devices Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    search Name: MicroLink Devices, Inc. Place: Niles, Illinois Product: MicroLink Devices is a semiconductor manufacturer and system integrator that provides the latest...

  12. Website Policies / Important Links | Geothermal

    Office of Scientific and Technical Information (OSTI)

    Website Policies Important Links Website Policies Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  13. Website Policies / Important Links | sciencecinema

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  14. Website Policies / Important Links | sciencecinema

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  15. Website Policies / Important Links | Geothermal

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  16. Compiling & Linking | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    System Overview Data Storage & File Systems Compiling & Linking Overview of How to Compile and Link Example Program and Makefile for BG/Q How to Manage Threading bgclang Compiler Compiling and Linking FAQ Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource.

  17. Helpful Links - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Helpful Links Helpful Links Helpful Links Hanford Staff Directory Hanford Site Wide Programs Energy Employees Occupational Illness Compensation Hanford Workers Compensation Projects & Facilities HERO PHOENIX Hanford Meteorological Station Definitions Abbreviations and Acronyms Visitor Control and Site Access Visitor Hanford Computer Access Request Helpful Links Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Contact Us Do you have a question? Contact Hanford

  18. FRAMES-2.0 Software System: Linking to the Groundwater Modeling System (GMS) RT3D and MT3DMS Models

    SciTech Connect (OSTI)

    Whelan, Gene; Castleton, Karl J.; Pelton, Mitch A.

    2007-08-08

    Linkages to the Groundwater Modeling System have been developed at Pacific Northwest National Laboratory to enable the Nuclear Regulatory Commission (NRC) to more realistically assess the risk to the public of radioactive contaminants at NRC-licensed sites. Common software tools presently in use are limited in that they cannot assess contaminant migration through complex natural environments. The purpose of this initiative is to provide NRC with a licensing safety-analysis tool with sufficient power, flexibility, and utility that it can serve as the primary software platform for analyzing the hazards associated with licensing actions at those complex sites at which the traditional tools are inappropriate. As a tool designed to realistically approximate prospective doses to the public, this initiative addresses NRCs safety-performance goal by confirming that licensing actions do not result in undue risk to the public.

  19. ARM - Quick Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links Related Links ISDAC Home AAF Home AVP Aircraft Instrumentation, October 14-16, 2008 ARM Data Discovery Browse Data Post-Campaign Data Sets Flight Summary Table (PDF, 440K) ISDAC Wiki Mission Summary Journal Deployment Resources NSA Site ARM Data Plots Quick Links Experiment Planning ISDAC Proposal Abstract Full Proposal (pdf, 1,735K) Science Questions Science Overview Document for ISDAC (pdf, 525K) ISDAC Flight Planning Document (PDF, 216K) Collaborations Logistics Measurements &

  20. Related Links - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Links Hanford Advisory Board Convening Report SSAB Guidance Memorandum of Understanding Membership Nomination and Appointment Process Operating Ground Rules Calendars Advice and Responses Full Board Meeting Information Committee Meeting Information Outgoing Board Correspondence Key Board Products and Special Reports HAB Annual Report HAB and Committee Lists Points of Contact Related Links Related Links Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size

  1. AlumniLink

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    AlumniLink Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit AlumniLink Bi-monthly publication connecting our alumni with news, information and former colleagues from the Lab. Alumni September 2015 September 2015 Neutrons find "missing" magnetism of plutonium Young, Jupiter-like planet discovered Four Los Alamos projects selected as R&D 100 Award finalists SHARE Alumni July 2015 July 2015 Mars Rover's

  2. Nuclear Data Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links to Useful Online Nuclear Physics Journals Important Online Resources Science Direct ... Elsevier Physics Online: Nuclear Physics A, B, Physics Repots, Physics Letters B and more. ...

  3. Links (pbl/contracts)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Implementation Links to related sites Regional Dialogue Transmission Regional Dialogue issues Team ASC Methodology 2012 BPA Rate Case Page content last modified on: April 06, 2010...

  4. Related Links - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links Tri-Party Agreement The Agreement Announcements List of Approved Changes TPA Project Manager's Lists Modifications for Public Comment Data Management MP-14 WIDS...

  5. ARM - Related Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Links Related Links TWP-ICE Home Tropical Western Pacific Home ARM Data Discovery Browse Data Post-Experiment Data Sets Weather Summary (pdf, 6M) New York Workshop Presentations Experiment Planning TWP-ICE Proposal Abstract Detailed Experiment Description Science Plan (pdf, 1M) Operations Plan (pdf, 321K) Maps Contact Info Related Links Daily Report Report Archives Press Media Coverage TWP-ICE Fact Sheet (pdf, 211K) Press Releases TWP-ICE Images ARM flickr site <=""

  6. Spins and Heat in Nanoscale Electronic Systems (SHINES) | U.S. DOE Office

    Office of Science (SC) [DOE]

    of Science (SC) Spins and Heat in Nanoscale Electronic Systems (SHINES) Energy Frontier Research Centers (EFRCs) EFRCs Home Centers EFRC External Websites Research Science Highlights News & Events Publications History Contact BES Home Centers Spins and Heat in Nanoscale Electronic Systems (SHINES) Print Text Size: A A A FeedbackShare Page SHINES Header Director Jing Shi Lead Institution University of California, Riverside Year Established 2014 Mission To explore the interplay of spin,

  7. EEO Links | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Links DOE Office of Civil Rights Department Of Justice Civil Rights Division Department of Veterans Affairs Equal Employment Opportunity Commission Office of Personnel Management U.S. Merit Systems Protection Board U.S. Office of Special Counsel

  8. A New Link Between Human and Bacterial Signaling Machinery

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    A New Link Between Human and Bacterial Signaling Machinery A New Link Between Human and Bacterial Signaling Machinery Print Tuesday, 19 August 2014 10:34 The human immune system...

  9. Related Links | Department of Energy

    Office of Environmental Management (EM)

    Information Resources Related Links Related Links These resources provide more information about wind energy research within the United States and abroad. Consumer and ...

  10. AlumniLink: May 2015

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Join our highlighted LinkedIn discussion Descartes Labs is using deep learning technology developed at LANL to help us better...

  11. Page 11, Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    11 of 11 Previous Page Links Information for Employees & In-Processing DOE Order 3792.3 - Drug-Free Federal Workplace Testing http://www.archives.gov/federal-register/codification/executive-order/12564.html Flexible Spending Accounts (FSA) https://www.fsafeds.com/fsafeds/index.asp Pay & Pay Scales http://www.opm.gov/a-z-index/ Benefits Facts on Leave Programs http://www.opm.gov/policy-data-oversight/pay-leave/leave-administration/ Health Benefits

  12. Nuclear Data Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links to Other Useful Sites Online Journals Institutions and Programs Related to Nuclear Physics U.S. Nuclear Data Program: All evaluated nuclear data supported by the U.S. Department of Energy. National Nuclear Data Center: Brookhaven National Laboratory; Evaluated Nuclear Structure Data Files (ENSDF), Nuclear Science References (NSR) and other databases. Isotopes Project: (E.O.L. Berkeley National Laboratory) Table of Isotopes, Isotope Explorer, XUNDL, Nuclear Data Dissemination Homepage, and

  13. CAMD Nanofabrication Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Research :: Publications :: Infrastructure :: Links :: Nanofabrication Facility in News Nano 50TM Awards: The Nano 50TM Awards, presented by Nanotech Briefs magazine, recognize the top 50 technologies, products and innovators that have significantly impacted, or are expected to impact, the state of the art in nanotechnology. "The winners of the Nano 50 awards are the best of the best - the innovative people and technologies that will continue to move nanotechnology to key mainstream

  14. Balanced link for dry coal extrusion pumps

    DOE Patents [OSTI]

    Bebejian, Maral

    2013-10-22

    A link which defines a link body that includes a multiple of link plates integral with a link body, the link body disposed at least partially forward of a forward edge of the multiple of link plates.

  15. The design, fabrication, operation and maintenance of (41) 400 H. P. -600 SCFM helium screw compressor systems (Five-year operation report)

    SciTech Connect (OSTI)

    Pallaver, C.

    1988-12-01

    Fermi National Accelerator Laboratory (Fermilab) uses thirty-four (34) identical compressor systems connected to a common header to supply clean high pressure helium gas feeding 26 refrigerators supplying liquid helium to 777 super conducting magnets. There are seven (7) similar compressor packages in other locations. The purpose of this paper is (after five years of operation) to present all the problems, modifications and experiences associated with the design and operation of these compressor systems.

  16. Conservation Standards Enforcement: Useful Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Useful Links Conservation Standards Enforcement: Useful Links This page provides a variety of links to help manufacturers fulfill their compliance obligations under the energy conservation standards program for consumer products and industrial equipment. Under the applicable law (42 U.S.C. 6291-6317), an importer is a manufacturer; therefore, any material you read in the links below that references a "manufacturer" also applies to an importer. Certification Compliance Management System

  17. Website Policies / Important Links | DOE Patents

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  18. Website Policies / Important Links | Data Explorer

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  19. Website Policies / Important Links | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Website Policies Important Links Website Policies Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  20. Website Policies / Important Links | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  1. Website Policies / Important Links | Data Explorer

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  2. Website Policies / Important Links | DOE Patents

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  3. BPA Generic Header for Web Posting

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    forecast of wind in its balancing authority area publicly available through its Web site. By the end of the fiscal year, BPA will assess the benefits of the vendor...

  4. Template:MappingHeader | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    custom Geothermal banner, typically across the top of the page, which features a unique color scheme and simple menu. Parameters none Usage It should be called in the following...

  5. Template:GeothermalHeader | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Geothermal banner, typically across the top of the page, which features a unique orange color scheme and simple menu. Parameters none Usage It should be called in the following...

  6. Template:ReferenceHeader | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Reference Library banner, typically across the top of the page, which features a unique color scheme and simple menu. Parameters none Usage It should be called in the following...

  7. Apparatus and methods for supplying auxiliary steam in a combined cycle system

    SciTech Connect (OSTI)

    Gorman, William G.; Carberg, William George; Jones, Charles Michael

    2002-01-01

    To provide auxiliary steam, a low pressure valve is opened in a combined cycle system to divert low pressure steam from the heat recovery steam generator to a header for supplying steam to a second combined cycle's steam turbine seals, sparging devices and cooling steam for the steam turbine if the steam turbine and gas turbine lie on a common shaft with the generator. Cooling steam is supplied the gas turbine in the combined cycle system from the high pressure steam turbine. Spent gas turbine cooling steam may augment the low pressure steam supplied to the header by opening a high pressure valve whereby high and low pressure steam flows are combined. An attemperator is used to reduce the temperature of the combined steam in response to auxiliary steam flows above a predetermined flow and a steam header temperature above a predetermined temperature. The auxiliary steam may be used to start additional combined cycle units or to provide a host unit with steam turbine cooling and sealing steam during full-speed no-load operation after a load rejection.

  8. Grid-Interactive Electric Vehicle DC-Link Photovoltaic Charging...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Find More Like This Return to Search Grid-Interactive Electric Vehicle DC-Link Photovoltaic Charging System University of Colorado Contact CU About This Technology Publications: ...

  9. Link Alpha L

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Accommodation Program Laser Ablation: Advanced Laser Technologies Lab Laser Management System (Laser Inventory) Laser Safety Web Page Lasers, Optical Accelerator Systems...

  10. Link Alpha F

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Verification Project FAQ on Computing Topics Financial Compliance Financial Management System (FMS 8.8 - FY14 and Prior) Financial Management System (FMS 9.2 - FY15+)...

  11. Link Alpha E

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Electricity Markets and Policy Electricity: Standby Power ... Environmental Management System Environmental Report for Laboratory Site Environmental Restoration Program Equal Employment ...

  12. Multilevel DC link inverter

    DOE Patents [OSTI]

    Su, Gui-Jia

    2003-06-10

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  13. Link Alpha H

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Hands-on Universe (HOU) Program Harassment Prevention and Harassment Complaint Process HARP Hazard Management System (HMS) Hazardous Waste Requisition Health Services at the Lab...

  14. Link Alpha B

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Access at the Lab Building Emergency Team Building Managers Building Technology and Urban Systems Division (ETA) Buildings: Ventilation & Infiltration Buses: Lab Shuttle Bus...

  15. Link Alpha P

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Particle Adventure: A Tour of the Atom & Tools for Discovery Particle Data Group (PDG) Password Reset Patent Group Payroll Department (CFO) PDSF: Parallel Distributed Systems ...

  16. Links | National Nuclear Security Administration

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy...

  17. Linking Humans and Systems in Nuclear Power

    SciTech Connect (OSTI)

    Jacques Hugo

    2013-02-01

    Traditional engineering methods do not make provision for the integration of human considerations, while traditional human factors methods do not scale well to the complexity of large-scale nuclear power plant projects. Although the need for up-to-date human factors engineering processes and tools is recognised widely in industry, so far no formal guidance has been developed. This article proposes such a framework.

  18. Helpful Links - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Help Solve Solar's Big Challenge Help Solve Solar's Big Challenge December 2, 2013 - 1:00pm Addthis Soft costs now account for more than 60% of the total price of installing residential solar energy systems. <a href="http://www.energy.gov/eere/articles/infographic-lets-get-work-solar-soft-costs">View the full infographic to learn more</a>. Soft costs now account for more than 60% of the total price of installing residential solar energy systems. View the full infographic to

  19. Major Conformed Contract Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Conformed Contract Links Major Conformed Contract Links Links to conformed copies of EM's major contracts. Major Conformed Contract Links (302.59 KB) More Documents & Publications Small Business Program Manager Directory EM Major Procurements DOE-Idaho Operations Office

  20. National Geothermal Data System: A Geothermal Data System for Exploration and Development

    SciTech Connect (OSTI)

    Allison, Lee; Richard, Stephen; Patten, Kim; Love, Diane; Coleman, Celia; Chen, Genhan

    2012-09-30

    Geothermal-relevant geosciences data from all 50 states (www.stategeothermaldata.org), federal agencies, national labs, and academic centers are being digitized and linked in a distributed online network funded by the U.S. Department of Energy Geothermal Data System (GDS) to foster geothermal energy exploration and development through use of interactive online ‘mashups,’data integration, and applications. Emphasis is first to make as much information as possible accessible online, with a long range goal to make data interoperable through standardized services and interchange formats. A growing set of more than thirty geoscience data content models is in use or under development to define standardized interchange formats for: aqueous chemistry, borehole temperature data, direct use feature, drill stem test, seismic event hypocenter, fault feature, geologic contact feature, geologic unit feature, thermal/hot spring description, metadata, quaternary fault, volcanic vent description, well header feature, borehole lithology log, crustal stress, gravity, heat flow/temperature gradient, permeability, and feature description data like developed geothermal systems, geologic unit geothermal characterization, permeability, production data, rock alteration description, rock chemistry, and thermal conductivity. Map services are also being developed for isopach maps, aquifer temperature maps, and several states are working on geothermal resource overview maps. Content models are developed based on existing community datasets to encourage widespread adoption and promulgate content quality standards. Geoscience data and maps from other GDS participating institutions, or “nodes” (e.g., U.S. Geological Survey, Southern Methodist University, Oregon Institute of Technology, Stanford University, the University of Utah) are being supplemented with extensive land management and land use resources from the Western Regional Partnership (15 federal agencies and 5 Western states) to

  1. MAJOR CONFORMED CONTRACTS LINKS Site/Project Contract Link Idaho

    Office of Environmental Management (EM)

    MAJOR CONFORMED CONTRACTS LINKS Site/Project Contract Link Idaho Idaho Cleanup Project http://www.id.doe.gov/doeid/ICPContract/ICPContract.htm Advance Mixed Waste Treatment http://www.id.energy.gov/doeid/AMWTPContract/AMWTPcontract.htm Oak Ridge http://science.energy.gov/isc/foia/electronic-reading-room/#MajorContractsAwarded Office of River Protection http://www.hanford.gov/page.cfm/DOE-ORPPrimeContracts EMCBC and Small Sites https://www.emcbc.doe.gov/About/PrimeContracts Richland

  2. Multiple weak-link SQUID

    SciTech Connect (OSTI)

    Kroger, H.

    1980-09-23

    The disclosed SQUID (Superconducting quantum interference device) comprises two superposed superconductive layers with an insulating layer therebetween. A plurality of holes through the insulating layer filled with superconductive material form weak links between the superconductive layers. One or more control lines superposed with respect to the superconductive layers provide magnetic flux through the area between the weak links to control the zero voltage supercurrent flowing through the weak links from one of the superconductive layers to the other thereby providing the switching function for Josephson superconductive circuits.

  3. LTS Related Links - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Links About Us LTS Home Page LTS Project Management LTS Transition and Timeline LTS Execution LTS Background LTS Information Management LTS Fact Sheets / Briefings LTS In The News LTS Related Links LTS Contact Us LTS Related Links Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Hanford Site Cleanup Completion Framework (DOE/RL 2009-10) (PDF) Hanford Long-Term Stewardship Program Plan (DOE/RL 2010-35) (PDF) DOE-EM LTS Site Legacy Management CERCLA 5 Year

  4. Cross-linked structure of network evolution

    SciTech Connect (OSTI)

    Bassett, Danielle S.; Wymbs, Nicholas F.; Grafton, Scott T.; Porter, Mason A.; Mucha, Peter J.

    2014-03-15

    We study the temporal co-variation of network co-evolution via the cross-link structure of networks, for which we take advantage of the formalism of hypergraphs to map cross-link structures back to network nodes. We investigate two sets of temporal network data in detail. In a network of coupled nonlinear oscillators, hyperedges that consist of network edges with temporally co-varying weights uncover the driving co-evolution patterns of edge weight dynamics both within and between oscillator communities. In the human brain, networks that represent temporal changes in brain activity during learning exhibit early co-evolution that then settles down with practice. Subsequent decreases in hyperedge size are consistent with emergence of an autonomous subgraph whose dynamics no longer depends on other parts of the network. Our results on real and synthetic networks give a poignant demonstration of the ability of cross-link structure to uncover unexpected co-evolution attributes in both real and synthetic dynamical systems. This, in turn, illustrates the utility of analyzing cross-links for investigating the structure of temporal networks.

  5. NREL: Energy Analysis - Related Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Links Here you'll find links to other programs, organizations, and information resources concerning other analysis capabilities, energy-modeling, and technology expertise related to renewable energy. International Applications NREL's International Program in its effort to promote the use of renewable energy as a tool for sustainable development, applies world-class expertise in technology development and deployment, economic analysis, resource assessment, project design and

  6. Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Related Links Related Links Private, public, and nonprofit organizations around the country offer a wide range of courses and other services to help you either improve your current skills or learn new ones. The sites featured here can help you find courses of specific interest as well as other information about training requirements for certain energy jobs. DOE Related Advanced Manufacturing Office: Training Find training sessions in your area and learn how to save energy in your manufacturing

  7. Overview of How to Compile and Link | Argonne Leadership Computing...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    code for the BGQ system is too complex to cover in this document. What follows is a brief summary. All compile and link procedures are performed on login nodes with a ...

  8. Alternative Fuels Data Center: Hydrogen Related Links

    Alternative Fuels and Advanced Vehicles Data Center

    Hydrogen Printable Version Share this resource Send a link to Alternative Fuels Data Center: Hydrogen Related Links to someone by E-mail Share Alternative Fuels Data Center: Hydrogen Related Links on Facebook Tweet about Alternative Fuels Data Center: Hydrogen Related Links on Twitter Bookmark Alternative Fuels Data Center: Hydrogen Related Links on Google Bookmark Alternative Fuels Data Center: Hydrogen Related Links on Delicious Rank Alternative Fuels Data Center: Hydrogen Related Links on

  9. Alternative Fuels Data Center: Propane Related Links

    Alternative Fuels and Advanced Vehicles Data Center

    Propane Printable Version Share this resource Send a link to Alternative Fuels Data Center: Propane Related Links to someone by E-mail Share Alternative Fuels Data Center: Propane Related Links on Facebook Tweet about Alternative Fuels Data Center: Propane Related Links on Twitter Bookmark Alternative Fuels Data Center: Propane Related Links on Google Bookmark Alternative Fuels Data Center: Propane Related Links on Delicious Rank Alternative Fuels Data Center: Propane Related Links on Digg Find

  10. Khovanov homology of graph-links

    SciTech Connect (OSTI)

    Nikonov, Igor M

    2012-08-31

    Graph-links arise as the intersection graphs of turning chord diagrams of links. Speaking informally, graph-links provide a combinatorial description of links up to mutations. Many link invariants can be reformulated in the language of graph-links. Khovanov homology, a well-known and useful knot invariant, is defined for graph-links in this paper (in the case of the ground field of characteristic two). Bibliography: 14 titles.

  11. Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Related Sites National Nanotechnology Initiative Nano Technology Industries Advanced Materials Research Institute Institute of Physics Max-Planck Institute for Kohlenforschung The ...

  12. Links

    Energy.gov [DOE]

    More Legal Research ResourcesEnergy Law NetLegal Citation Style GuideNuclear Regulatory LegislationOpen CRSPublic Library of LawTreatiesU.S. Code Classification TablesU.S. Congressional Documents...

  13. ElectraLink | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ElectraLink Jump to: navigation, search Name: ElectraLink Place: London, United Kingdom Product: London-based ElectraLink specialises in technology to communicate data between the...

  14. Alternative Fuels Data Center: Electricity Related Links

    Alternative Fuels and Advanced Vehicles Data Center

    Electricity Printable Version Share this resource Send a link to Alternative Fuels Data Center: Electricity Related Links to someone by E-mail Share Alternative Fuels Data Center: Electricity Related Links on Facebook Tweet about Alternative Fuels Data Center: Electricity Related Links on Twitter Bookmark Alternative Fuels Data Center: Electricity Related Links on Google Bookmark Alternative Fuels Data Center: Electricity Related Links on Delicious Rank Alternative Fuels Data Center: Electricity

  15. BizLink Technology | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    BizLink Technology Jump to: navigation, search Name: BizLink Technology Place: Fremont, California Zip: 94538 Sector: Solar Product: California-based manufacturer of solar modules,...

  16. Useful Links - Combustion Energy Frontier Research Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    FAQ Useful Links Useful Links Detailed campus map with CEFRC summer school buildings highlighted (NEW) Schedule of Events (NEW) Campus Map with CEFRC-specific buildings...

  17. Guiding Documents and Links | Department of Energy

    Office of Environmental Management (EM)

    Guiding Documents and Links Guiding Documents and Links Federal Executive Order 13653, Preparing the United States for the Impacts of Climate Change Executive Order 13693, Planning ...

  18. Help:Linked images | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Linked images Redirect page Jump to: navigation, search REDIRECT Manual:Linked images Retrieved from "http:en.openei.orgwindex.php?titleHelp:Linkedimages&oldid58478" ...

  19. Biosafety Links | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Biosafety Links Animals in Research Autoclave Safety Bacterial Strains Biological Safety Cabinets Biosafety Levels and Checklists Biosafety Levels of Specific Agents Bloodborne Pathogens Bloodborne Pathogen Training CDC-NIH Biosafety Guidelines CDC-NIH Recombinant DNA Guidelines Cell Culture Containment Facilities Disinfection Human Subjects Issues Importation Permits for Etiologic Agents Infectious Agents Microwave Safety MSDSs for Infectious Substances Organizations Prions Recombinant DNA

  20. EIA - Natural Gas Pipeline Network - Regional Overview and Links

    U.S. Energy Information Administration (EIA) (indexed site)

    Overview and Links About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 2007/2008 with selected updates Regional Overviews and Links to Pipeline Companies Through a series of interconnecting interstate and intrastate pipelines the transportation of natural gas from one location to another within the United States has become a relatively seamless operation. While intrastate pipeline systems often transports natural gas from production areas directly to consumers in

  1. Cyclotron Institute » Journal Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Journal Links Acta Physica Polonica A Acta Physica Polonica B LANL e-Print Archive Nuclear Experiment Nuclear Theory Accelerator Physics Atomic Physics American Physical Society Physical Review A Physical Review C Physical Review D Physical Review Letters Reviews of Modern Physics Institute of Physics Journal of Physics B: Atomic, Molecular and Optical Physics Journal of Physics G: Nuclear and Particle Physics American Institute of Physics Applied Physics Letters Physics Today Nuclear Physics A

  2. Join our highlighted LinkedIn discussion

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Join our highlighted LinkedIn discussion What experiences have alumni had in software releases and deployments at different institutions? March 1, 2015 Robert Jilek Robert Jilek Contact Linda Anderman Email alumni LinkedIn Join us for a variety of discussions on the Lab's LinkedIn Alumni page What experiences have alumni had in

  3. Join our highlighted LinkedIn discussion

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Join our highlighted LinkedIn discussion Congratulations to LANL's Claudia Mora for being selected president elect of the Geological Society of America! July 1, 2015 Claudia Mora Claudia Mora Contact Linda Anderman Email alumni LinkedIn Join us for a variety of discussions on the Lab's LinkedIn Alumni page Congratulations to

  4. Topics: Uncovering the physics of magnetic self-organization and links to

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    astrophysics - MST - UW Plasma Physics Uncovering the physics of magnetic self-organization and links to astrophysics UW Madison Madison Symmetric Torus Topics: Uncovering the physics of magnetic self-organization and links to astrophysics MST HomeGraduate Student InformationLinksTourControl and Auxiliary SystemsPhysics TopicsDeviceResearch MissionMST People mst logo CPLA Home Directory Publications Links Internal University of Wisconsin Physics Department Research funding includes support

  5. SciTech Connect: Website Policies / Important Links

    Office of Scientific and Technical Information (OSTI)

    Website Policies Important Links Website Policies Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  6. SciTech Connect: Website Policies / Important Links

    Office of Scientific and Technical Information (OSTI)

    Website Policies / Important Links Website Policies / Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  7. Collective operations in a file system based execution model

    DOE Patents [OSTI]

    Shinde, Pravin; Van Hensbergen, Eric

    2013-02-19

    A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

  8. Collective operations in a file system based execution model

    DOE Patents [OSTI]

    Shinde, Pravin; Van Hensbergen, Eric

    2013-02-12

    A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

  9. Reference Links | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    Act External link DOJ Office of Information and Privacy External link Defense Nuclear Facilities Safety Board External link Government Printing Office External link National ...

  10. Useful Links for Small Businesses | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Useful Links for Small Businesses Useful Links for Small Businesses Business USA A product of collective thoughts and inputs from the following agencies who have pledged their commitment to making this site a one-stop shop for everything related to business in the USA. Electronic Subcontracting Reporting System (eSRS) This is the official site for the electronic Subcontracting Reporting System (eSRS). The use of eSRS promises to create higher visibility and introduce a more transparency into the

  11. Coal slurry fuel supply and purge system

    DOE Patents [OSTI]

    McDowell, Robert E.; Basic, Steven L.; Smith, Russel M.

    1994-01-01

    A coal slurry fuel supply and purge system for a locomotive engines is disclosed which includes a slurry recirculation path, a stand-by path for circulating slurry during idle or states of the engine when slurry fuel in not required by the engine, and an engine header fluid path connected to the stand-by path, for supplying and purging slurry fuel to and from fuel injectors. A controller controls the actuation of valves to facilitate supply and purge of slurry to and from the fuel injectors. A method for supplying and purging coal slurry in a compression ignition engine is disclosed which includes controlling fluid flow devices and valves in a plurality of fluid paths to facilitate continuous slurry recirculation and supply and purge of or slurry based on the operating state of the engine.

  12. Link Force Holdings Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    search Name: Link Force Holdings Ltd Place: China Product: China-based energy saving LED street light maker. References: Link Force Holdings Ltd1 This article is a stub. You...

  13. linked open data | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    linked open data Home Jweers's picture Submitted by Jweers(88) Contributor 10 October, 2012 - 08:20 LOD Workshop Invitation Event linked open data LOD Open Data workshop Update the...

  14. National Geothermal Data System: Interactive Assessment of Geothermal Energy Potential in the U.S.

    SciTech Connect (OSTI)

    Allison, Lee; Richard, Stephen; Clark, Ryan; Patten, Kim; Love, Diane; Coleman, Celia; Chen, Genhan; Matti, Jordan; Pape, Estelle; Musil, Leah

    2012-01-30

    Geothermal-relevant geosciences data from all 50 states (www.stategeothermaldata.org), federal agencies, national labs, and academic centers are being digitized and linked in a distributed online network via the U.S. Department of Energy-funded National Geothermal Data System (NGDS) to foster geothermal energy exploration and development through use of interactive online ‘mashups,’data integration, and applications. Emphasis is first to make as much information as possible accessible online, with a long range goal to make data interoperable through standardized services and interchange formats. An initial set of thirty geoscience data content models is in use or under development to define a standardized interchange format: aqueous chemistry, borehole temperature data, direct use feature, drill stem test, earthquake hypocenter, fault feature, geologic contact feature, geologic unit feature, thermal/hot spring description, metadata, quaternary fault, volcanic vent description, well header feature, borehole lithology log, crustal stress, gravity, heat flow/temperature gradient, permeability, and feature descriptions data like developed geothermal systems, geologic unit geothermal properties, permeability, production data, rock alteration description, rock chemistry, and thermal conductivity. Map services are also being developed for isopach maps, aquifer temperature maps, and several states are working on geothermal resource overview maps. Content models are developed preferentially from existing community use in order to encourage widespread adoption and promulgate minimum metadata quality standards. Geoscience data and maps from other NGDS participating institutions, or “nodes” (USGS, Southern Methodist University, Boise State University Geothermal Data Coalition) are being supplemented with extensive land management and land use resources from the Western Regional Partnership (15 federal agencies and 5 Western states) to provide access to a comprehensive

  15. Tunable Thermal Link - Energy Innovation Portal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Tunable Thermal Link Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing SummaryThermal links are incorporated into everything from frying pans to internal combustion engine spark plugs and heat sinks on integrated circuit boards. Typically, the link's thermal resistance is fixed and cannot be tuned after manufacture. While the ability to tune electrical resistors is widespread, virtually no tunable thermal resistance link exists, which has held back the

  16. E-print Network Website Policies and Important Links -- Energy...

    Office of Scientific and Technical Information (OSTI)

    Website Policies Important Links Javascript Not Enabled OSTI Security Website Policies and Important Links

  17. Track with overlapping links for dry coal extrusion pumps

    DOE Patents [OSTI]

    Saunders, Timothy; Brady, John D

    2014-01-21

    A chain for a particulate material extrusion pump includes a plurality of links, each of the plurality of links having a link body and a link ledge, wherein each link ledge of the plurality of links at least partially overlaps the link body of an adjacent one of the plurality of links.

  18. 2015 Aser links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Aser links 2015 Aser links Annual Site Environmental Reports (ASER); Sites; contacts; email 2015 ASER links (94.62 KB) More Documents & Publications DOE Annual Site Environmental Reports (ASER) 2010 Annual Site Environmental Report (ASER) Supplement 2011 Annual Site Environmental Report (ASER) Supplement

  19. Other Links | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    Other Links Print Text Size: A A A FeedbackShare Page DOE Directives PARS II Defense Acq. University External link CII External link EFCOG External link PMI External link Last ...

  20. Join our highlighted LinkedIn discussion

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Join our highlighted LinkedIn discussion Do you use social media when at conferences? November 1, 2014 Robert Jilek Robert Jilek Contact Linda Anderman Email alumni LinkedIn Join us for a variety of discussions on the Lab's LinkedIn Alumni page Do you use social media when at conferences? We are fascinated by this question and

  1. Join our highlighted LinkedIn discussion

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Join our highlighted LinkedIn discussion Top science stories of 2014 from Los Alamos National Lab January 1, 2015 Robert Jilek Robert Jilek Contact Linda Anderman Email alumni LinkedIn Join us for a variety of discussions on the Lab's LinkedIn Alumni page Top science stories of 2014 from Los Alamos National Lab What was your

  2. E-Link - User Account

    Office of Scientific and Technical Information (OSTI)

    information defines the type of access and various other data relationships in the system. ... in accordance with the accessdistribution limitation provided in the Announcement Notice. ...

  3. AlumniLink: September 2014

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    at Los Alamos National Laboratory New high-performance computer system, called Wolf, will be used for unclassified research Alumni spotlight Robert Jilek: Pellion ...

  4. Operability test procedure for the TK-900 beta/gamma liquid effluent monitoring system

    SciTech Connect (OSTI)

    Weissenfels, R.D.

    1995-02-24

    This operability test procedure will verify that the 221-B beta/gamma liquid effluent monitoring system, installed near the east end of the six inch chemical sewer header, functions as intended by design. An off-line, skid mounted, beta/gamma radiation monitor and pH monitor was installed near stairwell three in the 221-B electrical gallery by Project W-007H. The skid mounted monitoring system includes two radiation detectors and a pH meter, both with local digital displays. Output signals from each monitor are also received and displayed by the Facility Process Monitor and Control System (FPMCS). Pumps, motors, gauges, valves and transport lines complement the skid monitoring system. The system is part of BAT/AKART for the BCE liquid effluent system.

  5. Fuel Cells Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fuel Cells » Fuel Cells Related Links Fuel Cells Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded fuel cell activities, research plans and roadmaps, partnerships, and additional related links. DOE-Funded Fuel Cell Activities Each year, hydrogen and fuel cell projects funded by DOE's Hydrogen and Fuel Cells Program are reviewed for their merit during an Annual Merit Review and Peer Evaluation Meeting. View posters and presentations from the

  6. Hydrogen Delivery Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Delivery » Hydrogen Delivery Related Links Hydrogen Delivery Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded hydrogen delivery activities, research plans and roadmaps, models and tools, and additional related links. DOE-Funded Hydrogen Delivery Activities Each year, hydrogen and fuel cell projects funded by DOE's Hydrogen and Fuel Cells Program are reviewed for their merit during an Annual Merit Review and Peer Evaluation Meeting. View posters

  7. Hydrogen Production Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Production Related Links Hydrogen Production Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded hydrogen production activities, research plans and roadmaps, models and tools, and additional related links. DOE-Funded Hydrogen Production Activities Each year, hydrogen and fuel cell projects funded by DOE's Hydrogen and Fuel Cells Program are reviewed for their merit during an Annual Merit Review and Peer Evaluation Meeting. View posters and

  8. Hydrogen Storage Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Related Links Hydrogen Storage Related Links The following resources provide details about U.S. Department of Energy (DOE)-funded hydrogen storage activities, research plans and roadmaps, models and tools, and additional related links. DOE-Funded Hydrogen Storage Activities Each year, hydrogen and fuel cell projects funded by DOE's Hydrogen and Fuel Cells Program are reviewed for their merit during an Annual Merit Review and Peer Evaluation Meeting. View posters and presentations from the latest

  9. Join our highlighted LinkedIn discussion

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Join our highlighted LinkedIn discussion Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Join our highlighted LinkedIn discussion Descartes Labs is using deep learning technology developed at LANL to help us better understand our world May 1, 2015 The site offers a variety of Los Alamos-developed biosurveillance tools that can be used for decision support in disease surveillance. The site offers a variety of Los

  10. The versatile link, a common project for super-LHC

    SciTech Connect (OSTI)

    Amaral, Luis; Dris, Stefanos; Gerardin, Alexandre; Huffman, Todd; Issever, Cigdem; Pacheco, Alberto Jimenez; Jones, Mark; Kwan, Simon; Lee, Shih-Chang; Lian, Zhijun; Liu, Tiankuan; /CERN /Oxford U. /Fermilab /Taipei, Computing Ctr. /Southern Methodist U.

    2009-07-01

    Radiation tolerant, high speed optoelectronic data transmission links are fundamental building blocks in today's large scale High Energy Physics (HEP) detectors, as exemplified by the four experiments currently under commissioning at the Large Hadron Collider (LHC), see for example. New experiments or upgrades will impose even more stringent demands on these systems from the point of view of performance and radiation tolerance. This can already be seen from the developments underway for the Super Large Hadron Collider (SLHC) project, a proposed upgrade to the LHC aiming at increasing the luminosity of the machine by factor of 10 to 10{sup 35} cm{sup -2}s{sup -1}, and thus providing a better chance to see rare processes and improving statistically marginal measurements. In the past, specific data transmission links have been independently developed by each LHC experiment for data acquisition (DAQ), detector control as well as trigger and timing distribution (TTC). This was justified by the different types of applications being targeted as well as by technological limitations preventing one single solution from fitting all requirements. However with today's maturity of optoelectronic and CMOS technologies it is possible to envisage the development of a general purpose optical link which can cover most transmission applications: a Versatile Link. Such an approach has the clear advantage of concentrating the development effort on one single project targeting an optical link whose final functionality will only result from the topology and configuration settings adopted.

  11. Related Links | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    Association for Computing Machinery External link Computing Research Association External link International Exascale Software Project External link Last modified: 352016 7:59:23

  12. Fusion Links | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    Fusion Facilities and Personnel Directory External link Fusion Power Associates External link Institute of Electrical and Electronic Engineers External link International Tokamak ...

  13. DOE - NNSA/NFO -- Policies and Important Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Website Policies and Important Links NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Website Policies and Important Links Privacy Policy FOIA Important Links Privacy ...

  14. Former Worker Medical Screening Program Related Documents & Links...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Related Documents & Links Former Worker Medical Screening Program Related Documents & Links Related Documents & Links Beryllium Information-ORISE Chronic Beryllium Disease ...

  15. OSTIblog Articles in the reference linking Topic | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    reference linking Topic OSTI and Reference Linking by Daphne Evans 13 May, 2008 in Technology OSTI actively supports the practice of Reference Linking. Also referred to as citation ...

  16. WaikatoLink Limited | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Limited Jump to: navigation, search Name: WaikatoLink Limited Place: New Zealand Sector: Services Product: General Financial & Legal Services ( Individual Angel network )...

  17. Linked Energy Data | OpenEI

    Open Energy Information (Open El) [EERE & EIA]

    traditional web provides interlinked documents that are designed for humans to read, the web of Linked Data provides interlinked data that is designed to be processed by software...

  18. 2014 Refresh Automated Frontpage Slideshow Header Text | OSTI...

    Office of Scientific and Technical Information (OSTI)

    Revision ID Field name Date Old state New state name By Comment Operations 16,564 Tue, 2016-05-10 15:23 Draft Published Justin Roby Publishing 2014 Refresh Automated Slideshow ...

  19. Template:MappingToolsHeader | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    to embed a custom banner, typically across the top of the page, which features a unique color scheme and simple menu. Parameters none Usage It should be called in the following...

  20. Template:RegulatoryToolkitHeader | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Toolkit banner, typically across the top of the page, which features a unique blue color scheme and simple menu. Parameters none Usage It should be called in the following...

  1. C++11 header files appear missing on Edison

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    > CC -stdc++11 test.cxx -o test.x test.cxx(2): catastrophic error: cannot open source file "chrono" include compilation aborted for test.cxx (code 4) edison03:...

  2. Property:Incentive/Auth7Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Auth7Link Jump to: navigation, search Property Name IncentiveAuth7Link Property Type URL Description Url link to authority. Pages using the property "IncentiveAuth7Link" Showing...

  3. Property:Incentive/Auth9Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Auth9Link Jump to: navigation, search Property Name IncentiveAuth9Link Property Type URL Description Url link to authority. Pages using the property "IncentiveAuth9Link" Showing...

  4. Property:Incentive/Auth11Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    1Link Jump to: navigation, search Property Name IncentiveAuth11Link Property Type URL Description Url link to authority Pages using the property "IncentiveAuth11Link" Showing 20...

  5. Mitigation of steam generator tube rupture in a pressurized water reactor with passive safety systems

    DOE Patents [OSTI]

    McDermott, D.J.; Schrader, K.J.; Schulz, T.L.

    1994-05-03

    The effects of steam generator tube ruptures in a pressurized water reactor are mitigated by reducing the pressure in the primary loop by diverting reactor coolant through the heat exchanger of a passive heat removal system immersed in the in containment refueling water storage tank in response to a high feed water level in the steam generator. Reactor coolant inventory is maintained by also in response to high steam generator level introducing coolant into the primary loop from core make-up tanks at the pressure in the reactor coolant system pressurizer. The high steam generator level is also used to isolate the start-up feed water system and the chemical and volume control system to prevent flooding into the steam header. 2 figures.

  6. Mitigation of steam generator tube rupture in a pressurized water reactor with passive safety systems

    DOE Patents [OSTI]

    McDermott, Daniel J.; Schrader, Kenneth J.; Schulz, Terry L.

    1994-01-01

    The effects of steam generator tube ruptures in a pressurized water reactor are mitigated by reducing the pressure in the primary loop by diverting reactor coolant through the heat exchanger of a passive heat removal system immersed in the in containment refueling water storage tank in response to a high feed water level in the steam generator. Reactor coolant inventory is maintained by also in response to high steam generator level introducing coolant into the primary loop from core make-up tanks at the pressure in the reactor coolant system pressurizer. The high steam generator level is also used to isolate the start-up feed water system and the chemical and volume control system to prevent flooding into the steam header. 2 figures.

  7. Jonathan Link, Columbia NuCosmo '02

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    7-19, 2002 Jonathan Link, Columbia NuCosmo '02 Jonathan Link Columbia University Workshop on Neutrino News from the Lab and the Cosmos October 17-19, 2002 October 17-19, 2002 Jonathan Link, Columbia NuCosmo '02 Outline 1. The LSND Experiment a. The experimental setup b. Results c. Ramifications 2. MiniBooNE a. The BooNE Collaboration b. The beam line and expected neutrino flux c. The MiniBooNE detector d. Expected backgrounds and systematics e. First neutrino events, and cosmic rays f.

  8. Jonathan Link, Columbia KEK Topical Conference

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    -22, 2001 Jonathan Link, Columbia KEK Topical Conference Short Baseline Neutrino Oscillations and MiniBooNE Jonathan Link Columbia University The 5 th KEK Topical Conference - Frontiers in Flavor Physics November 20-22, 2001 November 20-22, 2001 Jonathan Link, Columbia KEK Topical Conference Outline 1. Background on Short Baseline Neutrino Oscillations * A little neutrino physics * The LSND oscillation result 2. About MiniBooNE 3. Status of MiniBooNE. Some of you may have noticed that I'll be

  9. Privacy Act Links to Related Sites | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Links to Related Sites The Privacy Act of 1974 (Title 5, United States Code, Section 552a). The Federal Register is the official daily publication for Rules, Proposed Rules, and Notices of Federal agencies and organizations, as well as Executive Orders and other Presidential Documents. The Privacy Act Issuances Compilation contains descriptions of Federal agency systems of records maintained on individuals and rules agencies follow to assist individuals who request

  10. Highly cross-linked nanoporous polymers

    DOE Patents [OSTI]

    Steckle, Jr., Warren P.; Apen, Paul G.; Mitchell, Michael A.

    1998-01-01

    Condensation polymerization followed by a supercritical extraction step can be used to obtain highly cross-linked nanoporous polymers with high surface area, controlled pore sizes and rigid structural integrity. The invention polymers are useful for applications requiring separation membranes.

  11. Highly cross-linked nanoporous polymers

    DOE Patents [OSTI]

    Steckle, Jr., Warren P.; Apen, Paul G.; Mitchell, Michael A.

    1997-01-01

    Condensation polymerization followed by a supercritical extraction step can be used to obtain highly cross-linked nanoporous polymers with high surface area, controlled pore sizes and rigid structural integrity. The invention polymers are useful for applications requiring separation membranes.

  12. OpenEI and Linked Open Data

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... in the last two years alone." -IBM, 2012 (http:www-01.ibm.comsoftwaredatabigdata) 13 Open Energy Information http:en.openei.org LINKED OPEN DATA AT WORK Behind The Scenes, ...

  13. OpenEI Community - linked open data

    Open Energy Information (Open El) [EERE & EIA]

    linked-open-data-workshop-washington-dc

  14. Fuel Cell Technologies Manufacturing Related Links

    Energy.gov [DOE]

    The following resources provide details about U.S. Department of Energy-funded fuel cell technologies manufacturing activities, other EERE and federal manufacturing activities and initiatives, research plans and roadmaps, workshops, and additional related links.

  15. Preoperational test report, cross-site transfer system integrated test (POTR-007)

    SciTech Connect (OSTI)

    Pacquet, E.A.

    1998-04-02

    This report documents the results obtained during the performance of Preoperational Test POTP-007, from December 12, 1997 to March 27, 1998. The main objectives were to demonstrate the operation of the following Cross-Site Transfer System components: Booster pumps P-3125A and P-3125B interlocks and controls, both local and remote; Booster pump P-3125A and P-3125B and associated variable speed drives VSD-1 and VSD-2 performance in both manual and automatic modes; and Water filling, circulation, venting and draining of the transfer headers (supernate and slurry line). As described in reference 1, the following components of the Cross-Site Transfer System that would normally be used during an actual waste transfer, are not used in this specific test: Water Flush System; Valving and instrumentation associated with the 241-SY-A valve pit jumpers; and Valving and instrumentation associated with the 244-A lift station.

  16. Environmental Justice Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Links Environmental Justice Links Public Information Center DOE Library U.S. Department of Health and Human Services (HHS), National Health Information Center U.S. Department of Health and Human Services (HHS), Office of Minority Health Resource Center U.S. Department of Housing and Urban Development Online Library U.S. Department of Interior Library U.S. Department of Labor Library U.S. Department of Transportation (DOT) Library U.S. Environmental Protection Agency Library Services for the

  17. Links for Scientists and Researchers | Jefferson Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links for Scientists and Researchers Below you will find links commonly used by scientists, users and others who conduct research at Jefferson Lab. Experimental Areas Hall A Hall B Hall C Hall D Other Work Areas Physics Division Work Planning Requirements Physics Division Work Governance Area Access for Students Training requirements for experimental areas Nuclear Physics Program Physics Home Page Experiment Schedule Three-Year Accelerator Schedule Program Advisory Committee (PAC) Experiment

  18. Thermochemical Conversion Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Conversion » Thermochemical Conversion Related Links Thermochemical Conversion Related Links Further reading about current Bioenergy Technologies Office R&D in the Thermochemical Platform can be found in this website's Information Resources section. Some key publications are: Biomass Conversion: From Feedstocks to Final Products (July 2016) Thermochemical Conversion 2009 Peer Review Design Case Summary: Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating, and

  19. Feedstock Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Related Links Feedstock Related Links There are a variety of other resources available for information on biomass feedstocks. We have organized some of those resources into the following categories: Other DOE Offices and Federal Agencies Department of Energy (DOE) Office of Science Biological and Environmental Research (BER) Biofuels Mission Focus DOE Office of Science BER Bioenergy Research Centers U.S. Department of Agriculture (USDA) 2007 Farm Bill Energy Provision USDA Agriculture Research

  20. Archived Links: International EERE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Archived Links: International EERE Archived Links: International EERE Below you may view and download the archived Success Stories / Fact Sheets from International EERE: Accelerating the Clean Energy Transition in South Africa (May 28, 2015) Fact Sheet: Accelerating the Deployment of Energy Efficiency & Renewable Energy in South Africa (May 27, 2015) Sustainable Energy for Remote Indonesian Grids Explores Opportunities in Stakeholder Workshop (October 15, 2014) Mapping Opportunities for U.S.

  1. Related Links | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Related Links NNSA and Other Related Links DOE/NNSA Phonebook Freedom of Information Act Department of Energy DOE Directives DOE Jobs Online Defense Nuclear Facilities Safety Board DOE Pulse Publication DOE Office of Health, Safety and Security USA.Gov Los Alamos County Los Alamos National Laboratory LANL Phonebook National Nuclear Security Administration NNSA Service Center - Albuquerque NNSA Nevada Field Office New Mexico Environmental Department - LANL Sandia National Laboratories Waste

  2. Emerging semantics to link phenotype and environment

    DOE PAGES-Beta [OSTI]

    Thessen, Anne E.; Bunker, Daniel E.; Buttigieg, Pier Luigi; Cooper, Laurel D.; Dahdul, Wasila M.; Domisch, Sami; Franz, Nico M.; Jaiswal, Pankaj; Lawrence-Dill, Carolyn J.; Midford, Peter E.; et al

    2015-12-14

    Understanding the interplay between environmental conditions and phenotypes is a fundamental goal of biology. Unfortunately, data that include observations on phenotype and environment are highly heterogeneous and thus difficult to find and integrate. One approach that is likely to improve the status quo involves the use of ontologies to standardize and link data about phenotypes and environments. Specifying and linking data through ontologies will allow researchers to increase the scope and flexibility of large-scale analyses aided by modern computing methods. Investments in this area would advance diverse fields such as ecology, phylogenetics, and conservation biology. While several biological ontologies aremore » well-developed, using them to link phenotypes and environments is rare because of gaps in ontological coverage and limits to interoperability among ontologies and disciplines. Lastly, in this manuscript, we present (1) use cases from diverse disciplines to illustrate questions that could be answered more efficiently using a robust linkage between phenotypes and environments, (2) two proof-of-concept analyses that show the value of linking phenotypes to environments in fishes and amphibians, and (3) two proposed example data models for linking phenotypes and environments using the extensible observation ontology (OBOE) and the Biological Collections Ontology (BCO); these provide a starting point for the development of a data model linking phenotypes and environments.« less

  3. Emerging semantics to link phenotype and environment

    SciTech Connect (OSTI)

    Thessen, Anne E.; Bunker, Daniel E.; Buttigieg, Pier Luigi; Cooper, Laurel D.; Dahdul, Wasila M.; Domisch, Sami; Franz, Nico M.; Jaiswal, Pankaj; Lawrence-Dill, Carolyn J.; Midford, Peter E.; Mungall, Christopher J.; Ramirez, Martin J.; Specht, Chelsea D.; Vogt, Lars; Vos, Rutger Aldo; Walls, Ramona L.; White, Jeffrey W.; Zhang, Guanyang; Deans, Andrew R.; Huala, Eva; Lewis, Suzanna E.; Mabee, Paula M.

    2015-12-14

    Understanding the interplay between environmental conditions and phenotypes is a fundamental goal of biology. Unfortunately, data that include observations on phenotype and environment are highly heterogeneous and thus difficult to find and integrate. One approach that is likely to improve the status quo involves the use of ontologies to standardize and link data about phenotypes and environments. Specifying and linking data through ontologies will allow researchers to increase the scope and flexibility of large-scale analyses aided by modern computing methods. Investments in this area would advance diverse fields such as ecology, phylogenetics, and conservation biology. While several biological ontologies are well-developed, using them to link phenotypes and environments is rare because of gaps in ontological coverage and limits to interoperability among ontologies and disciplines. Lastly, in this manuscript, we present (1) use cases from diverse disciplines to illustrate questions that could be answered more efficiently using a robust linkage between phenotypes and environments, (2) two proof-of-concept analyses that show the value of linking phenotypes to environments in fishes and amphibians, and (3) two proposed example data models for linking phenotypes and environments using the extensible observation ontology (OBOE) and the Biological Collections Ontology (BCO); these provide a starting point for the development of a data model linking phenotypes and environments.

  4. System Analysis Success Stories | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    System Analysis Success Stories System Analysis Success Stories Program Links System Analysis Success Stories Economic Impact Tools National Geothermal Data System (NGDS) Initiative

  5. Control design of Santo Tome back-to-back HVDC link

    SciTech Connect (OSTI)

    Rostamkolai, N.; Wegner, C.A.; Piwko, R.J.; Elahi, H.; Eitzmann, M.A. ); Garzi, G.; Tietz, P. )

    1993-08-01

    This paper describes the control design of the Santo tome' back-to-back HVDC link. The Santo Tome' HVDC converter will be the second dc link asynchronously connecting the Argentina and Brazil power systems. This paper focuses on the design of the reactive power control, automatic power control, load frequency control, power modulation control, automatic frequency control, and automatic synchronizing control functions of the 50 MW dc link. Time simulation and frequency domain results are included to illustrate the system response and verify the adequacy of the controllers performance in achieving stable operating conditions.

  6. Links - Plasma Couette Experiment - Cary Forest Group - UW Plasma Physics

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links UW Madison Plasma Couette Experiment Links PCX HomeResearch MissionPhysics TopicsDeviceDiagnosticsContacts LinksPCX People CPLA Home Directory Publications Links University of Wisconsin Physics Department Department of Energy National Science Foundation No links yet

  7. Real time markerless motion tracking using linked kinematic chains

    DOE Patents [OSTI]

    Luck, Jason P.; Small, Daniel E.

    2007-08-14

    A markerless method is described for tracking the motion of subjects in a three dimensional environment using a model based on linked kinematic chains. The invention is suitable for tracking robotic, animal or human subjects in real-time using a single computer with inexpensive video equipment, and does not require the use of markers or specialized clothing. A simple model of rigid linked segments is constructed of the subject and tracked using three dimensional volumetric data collected by a multiple camera video imaging system. A physics based method is then used to compute forces to align the model with subsequent volumetric data sets in real-time. The method is able to handle occlusion of segments and accommodates joint limits, velocity constraints, and collision constraints and provides for error recovery. The method further provides for elimination of singularities in Jacobian based calculations, which has been problematic in alternative methods.

  8. Ultrasonic probe system for the bore-side inspection of tubes and welds therein

    DOE Patents [OSTI]

    Cook, K. Von; Koerner, Dan W.; Cunningham, Jr., Robert A.; Murrin, Jr., Horace T.

    1977-07-26

    A probe system is provided for the bore-side inspection of tube-to-header welds and the like for small diameter tubes. The probe head of the system includes an ultrasonic transmitter-receiver transducer, a separate ultrasonic receiver, a reflector associated with the transducer to properly orient the ultrasonic signal with respect to a tube wall, a baffle to isolate the receiver from the transducer, and means for maintaining the probe head against the tube wall under investigation. Since the probe head must rotate to inspect along a helical path, special ultrasonic signal connections are employed. Through the use of the probe, flaws at either the inner or outer surfaces may be detected.

  9. Welcome to the First Issue of AlumniLink

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Welcome to the First Issue of AlumniLink A personal message from Lab Director Charlie McMillan June 20, 2014 First Issue of AlumniLink First Issue of AlumniLink Contact Linda...

  10. Hawaii Noise Forms and Links Webpage | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    and Links Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Hawaii Noise Forms and Links Webpage Abstract This webpage contains links to...

  11. Property:Incentive/Auth6Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Auth6Link Jump to: navigation, search Property Name IncentiveAuth6Link Property Type URL Pages using the property "IncentiveAuth6Link" Showing 25 pages using this property....

  12. Compiling and Linking | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Changes from Tukey to Cooley Compiling and Linking Using Cobalt on Cooley Visit on Cooley Paraview on Cooley ParaView Tutorial VNC on Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Compiling and Linking Compilers and MPI GNU compilers, version 4.4.7, are installed and are available in your default environment. To use version 4.8.1 of the GNU compilers instead, add +gcc-4.8.1 to

  13. Curing system for high voltage cross linked cables

    DOE Patents [OSTI]

    Bahder, George; Katz, Carlos; Bopp, Louis A.

    1978-01-01

    This invention makes extruded, vulcanized, high voltage cables insulated with thermosetting compounds at much higher rates of production and with superior insulation of reduced thickness and with reduced cavities or voids in the insulation. As the cable comes from an extruder, it passes into a curing chamber with a heat booster that quickly raises the insulation to a temperature at which it is cured much more quickly than with steam heating of the prior art. A high temperature liquid in contact with the insulation maintains the high temperature; and because of the greater curing heat, the cable can travel through the curing chamber at a faster rate and into a cooling tube where it contacts with a cooling liquid under high pressure. The insulation compound is treated to reduce the size of cavities; and the high pressure maintained by the curing and cooling mediums prevent expansion of cavities before the insulation is set.

  14. Links - Madison Dynamo Experiment - Cary Forest Group - UW Plasma Physics

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links UW Madison Madison Dynamo Experiment Links MDE HomeLinksNewsBackgroundPublicationsPresentationsContactsMDE People CPLA Home Directory Publications Links University of Wisconsin Physics Department Department of Energy National Science Foundation Local Links Plasma Physics in the UW Physics Department The Department of Physics University of Wisconsin - Madison Dynamo Links Riga Dynamo Experiment Karlsruhe Dynamo Experiment The Von-Karman Sodium Experiment Grenoble Geodynamo Experiment

  15. Compiling with -ipo produces "unresolved" warning messages at link time on

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Cray systems Compiling with -ipo produces "unresolved" warning messages at link time on Cray systems Compiling with -ipo produces "unresolved" warning messages at link time on Cray systems November 18, 2013 by Mike Stewart, NERSC USG Status: Reported to the darshan developers. Updated June 12, 2015 by Scott French, NERSC USG Updated March 9, 2016 by Jialin Liu, NERSC DAS This bug affects our Cray systems Edison and Cori, and is still present as of March 2016. When a code

  16. ECOWAS Clean Energy Gateway-Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ECOWAS Clean Energy Gateway-Links Jump to: navigation, search Economic Community of West African States (ECOWAS) Clean Energy Gateway Home | About | News | Links | Help | Countries...

  17. EIA - Natural Gas Pipeline Network - Regional Overview and Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Overview and Links About U.S. Natural Gas Pipelines - Transporting Natural Gas based on data through 20072008 with selected updates Regional Overviews and Links to Pipeline ...

  18. High PID Resistant Cross-Linked Encapsulnt Based on Polyolefin...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PID Resistant Cross-Linked Encapsulnt Based on Polyolefin SOLAR ASCE High PID Resistant Cross-Linked Encapsulnt Based on Polyolefin SOLAR ASCE Presented at the PV Module ...

  19. Linking Advanced Visualization and MATLAB for the Analysis of...

    Office of Scientific and Technical Information (OSTI)

    Linking Advanced Visualization and MATLAB for the Analysis of 3D Gene Expression Data Citation Details In-Document Search Title: Linking Advanced Visualization and MATLAB for the ...

  20. Linking Legacies: Connecting the Cold War Nuclear Weapons Production...

    Office of Environmental Management (EM)

    Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their Environmental Consequences Linking Legacies: Connecting the Cold War Nuclear Weapons ...

  1. Highly cross-linked nanoporous polymers

    DOE Patents [OSTI]

    Steckle, W.P. Jr.; Apen, P.G.; Mitchell, M.A.

    1998-01-20

    Condensation polymerization followed by a supercritical extraction step can be used to obtain highly cross-linked nanoporous polymers with high surface area, controlled pore sizes and rigid structural integrity. The invention polymers are useful for applications requiring separation membranes. 1 fig.

  2. Linked-View Parallel Coordinate Plot Renderer

    Energy Science and Technology Software Center (OSTI)

    2011-06-28

    This software allows multiple linked views for interactive querying via map-based data selection, bar chart analytic overlays, and high dynamic range (HDR) line renderings. The major component of the visualization package is a parallel coordinate renderer with binning, curved layouts, shader-based rendering, and other techniques to allow interactive visualization of multidimensional data.

  3. Thiazolothiazole-linked porous organic polymers

    SciTech Connect (OSTI)

    Zhu, Xiang; Tian, Chengcheng; Jin, Tian; Wang, Jitong; Mahurin, Shannon Mark; Mei, Wenwen; Xiong, Yan; Hu, Jun; Feng, Xinliang; Liu, Honglai; Dai, Sheng

    2014-10-07

    In this study, thiazolothiazole-linked porous organic polymers have been synthesized from a facile catalyst-free condensation reaction between aldehydes and dithiooxamide under solvothermal conditions. The resultant porous frameworks exhibit a highly selective uptake of CO2 over N2 under ambient conditions.

  4. Thiazolothiazole-linked porous organic polymers

    DOE PAGES-Beta [OSTI]

    Zhu, Xiang; Tian, Chengcheng; Jin, Tian; Wang, Jitong; Mahurin, Shannon Mark; Mei, Wenwen; Xiong, Yan; Hu, Jun; Feng, Xinliang; Liu, Honglai; et al

    2014-10-07

    In this study, thiazolothiazole-linked porous organic polymers have been synthesized from a facile catalyst-free condensation reaction between aldehydes and dithiooxamide under solvothermal conditions. The resultant porous frameworks exhibit a highly selective uptake of CO2 over N2 under ambient conditions.

  5. A fuzzy self-tuning PI controller for HVDC links

    SciTech Connect (OSTI)

    Routray, A.; Dash, P.K.; Panda, S.K.

    1996-09-01

    This paper introduces a fuzzy logic-based tuning of the controller parameters for the rectifier side current regulator and inverter side gamma controller in a high voltage direct current (HVDC) system. A typical point-to-point system has been taken with the detailed representation of converters, transmission links transformers, and filters. The current error and its derivative and the gamma error and its derivative are used as the principal signals to adjust the proportional and integral gains of the rectifier pole controller and the inverter gamma controller, respectively, for the optimum system performance under various normal and abnormal conditions. Finally, a comparative study has been performed with and without tuning, to prove the superiority of the proposed scheme.

  6. Link failure detection in a parallel computer

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Megerian, Mark G.; Smith, Brian E.

    2010-11-09

    Methods, apparatus, and products are disclosed for link failure detection in a parallel computer including compute nodes connected in a rectangular mesh network, each pair of adjacent compute nodes in the rectangular mesh network connected together using a pair of links, that includes: assigning each compute node to either a first group or a second group such that adjacent compute nodes in the rectangular mesh network are assigned to different groups; sending, by each of the compute nodes assigned to the first group, a first test message to each adjacent compute node assigned to the second group; determining, by each of the compute nodes assigned to the second group, whether the first test message was received from each adjacent compute node assigned to the first group; and notifying a user, by each of the compute nodes assigned to the second group, whether the first test message was received.

  7. Links | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Links NNSA HQ National Nuclear Security Administration Advanced Simulation & Computing NNSA Graduate Program NNSA Small Business Program Office of Defense Nuclear Nonproliferation Field Offices NNSA Albuquerque Complex Kansas City Field Office Livermore Field Office Los Alamos Field Office Naval Reactors Idaho Branch Office Nevada Field Office Sandia Field Office DOE Oak Ridge Sites Oak Ridge Office Oak Ridge National Laboratory UCOR Oak Ridge Institute for Science and Education Oak Ridge

  8. Related Links | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Related Links NNSA Lab Directed Research and Development (LDRD) Lab Directed Research and Development Collaborations DOE Adanced Scientific Computing Research DTRA (Defense Threat Reduction Agency) NAS (National Academy of Sciences) NSF (National Science Foundation) DOD (Department of Defense) NASA Exascale Activities NNSA Exascale Environment Planning Workshop ASCR Co-Design Centers Supercomputing Top 500 List ASC at Supercomputing Conference General Information ASC at the Labs How ASC Supports

  9. Study of fibreoptic communication links with the optical regeneration of signals

    SciTech Connect (OSTI)

    Shtyrina, O V; Fedoruk, Mikhail P; Turitsyn, Sergei K

    2005-02-28

    Wavelength-division-multiplexing fibreoptic communication links with optical 2R regenerators based on a saturable absorber are mathematically simulated. The results of optimisation of specific configurations of symmetric lines are presented, and it is shown that the transmission distance in systems with the periodic optical regeneration of signals considerably exceeds that in systems without optical regenerators. (fibreoptic communication. waveguides)

  10. Power links with Ireland -- Excitation of turbine-generator shaft torsional vibrations by variable frequency currents superimposed on DC currents in asynchronous HVDC links

    SciTech Connect (OSTI)

    Hammons, T.J.; Tay, B.W.; Kok, K.L.

    1995-08-01

    The paper describes an in-depth analysis of excitation of shaft torsional vibrations in steam-turbine-generator-exciter shafts in close proximity to HVDC converter stations by variable-frequency ripple currents superimposed on the DC currents in asynchronous Links. It extends earlier work to include an in depth analysis of system scaling factors for harmonic currents impressed on generators in Northern Ireland by an inverter and to investigate the phenomena for possible torsional vibrations in the generators by the Link. Frequencies at which shaft torsional vibrations would be excited by modulation product harmonics in 50Hz/50Hz asynchronous Links as a function of deviation in system frequency is reviewed. Relative noncharacteristic current levels for 50Hz/50Hz connectors are illustrated assuming ripple currents at the inverter which gives realistic harmonic voltages in a twelve-pulse bridge. The paper then shows that torques in machines in multi-machine networks may be estimated by proportioning HVDC link harmonic disturbance current appropriately to each machine at risk. It is concluded that variable-frequency ripple currents superimposed on the DC current in asynchronous links can excite sympathetic torsional vibrations in turbine-generator-exciter shafts.

  11. eLink_2013.jpg | OSTI, US Dept of Energy Office of Scientific and Technical

    Office of Scientific and Technical Information (OSTI)

    Information eLink_2013

  12. Compiling and Linking | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Compiling and Linking Compilers and MPI GNU compilers are installed and are available in your default environment. Intel compilers (intel-cc and intel-fc) are installed in /soft/apps. The current version is 11.0; add the key "+intel-11.0" to your .softenvrc file to use them. Multiple MPI versions are available, controlled

  13. Linking Legacies F2002-00544

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Linking Legacies F2002-00544 Fizeau. This 11-kiloton atmospheric nuclear explosion, code-named "Fizeau," was one of 210 atmospheric nuclear tests conducted by the United States. Of the 1,054 nuclear tests explosions conducted by the U.S., 904 were detonated at the Nevada Test Site. All U.S. nuclear explosions since 1962 have been underground. Event Fizeau, Operation Plumbbob, Yucca Flat, Nevada Test Site, Neuada. 9:45 A.M., September 14, 1957. Barrels of transuranic waste sit on a

  14. External Links | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    External Links Budget Budget Home About Budget by Program GAO Audit Reports External Links Contact Information Budget U.S. Department of Energy SC-41/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3541 F: (301) 903-9524 More Information » External Links Print Text Size: A A A FeedbackShare Page Office of Management and Budget (OMB) External link OMB Budget Documents External link CFO Budget Office U.S. Senate External link U.S. House of Representatives External

  15. Nippon Yusen KK NYK Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Link Jump to: navigation, search Name: Nippon Yusen KK (NYK Link) Place: Tokyo, Tokyo, Japan Zip: 100-0005 Sector: Solar Product: Logistics and shipping company moving to use...

  16. Widget:LinkedInCompany | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    allows you to add LinkedIn company widget to your wiki page. For example For nameGoogle: Widget:LinkedInCompany | nameGoogle Retrieved from "http:en.openei.orgw...

  17. Texas River Authority Website Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Legal Document- OtherOther: Texas River Authority Website LinksLegal Abstract The Texas Parks and Wildlife Department provides information on and links to each of the 23 river...

  18. Template:FilePreviewDirectLink | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    link to the actual asset instead of the file page about the asset. Parameters file - e.g. "LEDSGPslides.pdf" Usage Link to an OpenEI page (standard functionality)....

  19. Workplace Charging Challenge Partner: LinkedIn | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    LinkedIn Workplace Charging Challenge Partner: LinkedIn Workplace Charging Challenge Partner: LinkedIn Joined the Challenge: August 2016 Headquarters: Sunnyvale, CA Charging Locations: Sunnyvale, CA; Carpinteria, CA Domestic Employees: 7,000 LinkedIn is committed to helping employees positively impact the planet and is pleased to offer free plug-in electric vehicle (PEV) charging at work so employees can reduce the emissions from their daily commute. Since its workplace charging program began in

  20. LAC Regional Platform Workshop Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Announcement Agenda Participant Package Accommodations Location & Transportation Insurance & Visas Participants Presentations Outcomes Report Links Contact Us One Page Event...

  1. Computerized training management system

    DOE Patents [OSTI]

    Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

    1998-08-04

    A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

  2. Computerized training management system

    DOE Patents [OSTI]

    Rice, Harold B.; McNair, Robert C.; White, Kenneth; Maugeri, Terry

    1998-08-04

    A Computerized Training Management System (CTMS) for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base.RTM., an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches.

  3. NICS report links VOCs to respiratory problems

    SciTech Connect (OSTI)

    Kirschner, E.

    1992-04-22

    Children who live near the chemical plants of Kanawha Valley, WV, suffer more acute and chronic respiratory aliments than those farther away, says a Harvard University School of Public Health report. In the $1-million, five-year study commissioned by the National Institute for Chemical Studies (NICS:Charleston, WV) and funded by the Environmental Protection Agency, proximity to chemical plants that emit volatile organic compounds (VOCs) was linked to higher incidence of asthma, acute eye irritation, shortness of breath, and chronic cough. The researchers say they adjusted for most other factors, such as parental smoking and petroleum. {open_quotes}The research hypothesis was whether children in the valley had more symptoms,{close_quotes} says NICS president Paul Hill. {open_quotes}Yes, there is a difference.{close_quotes} The study showed that some ailments were up to 28% more prevalent in children in the valley than in other Kanawha County children.

  4. Link error from craype/2.5.0

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Link error from craype/2.5.0 Link error from craype/2.5.0 January 13, 2016 by Woo-Sun Yang If you build a code using a file called 'configure' with craype/2.5.0, Cray build-tools assumes that you want to use the 'native' link mode (e.g., gcc defaults to dynamic linking), by adding '-Wl,-rpath=/opt/intel/composer_xe_2015/compiler/lib/intel64 -lintlc'. This creates a link error: /usr/bin/ld: cannot find -lintlc A temporary work around is to swap the default craype (2.5.0) with an older or newer

  5. On Line Journals - Links - Cyclotron Institute

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Romanian Journal of Physics Nuclear Physics and Atomic Energy (National Academy of Sciences of Ukraine) Brazilian Journal of Physics Frontiers of Physics in China Few-Body Systems ...

  6. Hot Links to Cool Spots - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    National Highway Traffic Safety Administration U.S. Fire Administration Federal Emergency Management Agency U.S. Department of Energy Wildland Fire Assessment System - USDA Forest...

  7. Microwaves and particle accelerators: a fundamental link

    SciTech Connect (OSTI)

    Chattopadhyay, Swapan

    2011-07-01

    John Cockcroft's splitting of the atom and Ernest Lawrence's invention of the cyclotron in the first half of the twentieth century ushered in the grand era of ever higher energy particle accelerators to probe deeper into matter. It also forged a link, bonding scientific discovery with technological innovation that continues today in the twenty first century. The development of radar and high power vacuum electronics, especially microwave power tubes like the magnetrons and the klystrons in the pre-second world war era, was instrumental in the rapid development of circular and linear charged particle accelerators in the second half of the twentieth century. We had harnessed the powerful microwave radio-frequency sources from few tens of MHz to up to 90 GHz spanning L-band to W-band frequencies. Simultaneously in the second half of the twentieth century, lasers began to offer very first opportunities of controlling charged particles at smaller resolutions on the scale of wavelengths of visible light. We also witnessed in this period the emergence of the photon and neutron sciences driven by accelerators built-by-design producing tailored and ultra-bright pulses of bright photons and neutrons to probe structure and function of matter from aggregate to individual molecular and atomic scales in unexplored territories in material and life sciences. As we enter the twenty first century, the race for ever higher energies, brightness and luminosity to probe atto-metric and atto-second domains of the ultra-small structures and ultra-fast processes continues. These developments depend crucially on yet further advancements in the production and control of high power and high frequency microwaves and light sources, often intricately coupled in their operation to the high energy beams themselves. We give a glimpse of the recent developments and innovations in the electromagnetic production and control of charged particle beams in the service of science and society. (author)

  8. Local intelligent electronic device (IED) rendering templates over limited bandwidth communication link to manage remote IED

    DOE Patents [OSTI]

    Bradetich, Ryan; Dearien, Jason A; Grussling, Barry Jakob; Remaley, Gavin

    2013-11-05

    The present disclosure provides systems and methods for remote device management. According to various embodiments, a local intelligent electronic device (IED) may be in communication with a remote IED via a limited bandwidth communication link, such as a serial link. The limited bandwidth communication link may not support traditional remote management interfaces. According to one embodiment, a local IED may present an operator with a management interface for a remote IED by rendering locally stored templates. The local IED may render the locally stored templates using sparse data obtained from the remote IED. According to various embodiments, the management interface may be a web client interface and/or an HTML interface. The bandwidth required to present a remote management interface may be significantly reduced by rendering locally stored templates rather than requesting an entire management interface from the remote IED. According to various embodiments, an IED may comprise an encryption transceiver.

  9. Compiling and Linking FAQ | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Overview of How to Compile and Link Example Program and Makefile for BG/Q How to Manage Threading bgclang Compiler Compiling and Linking FAQ Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Compiling and Linking FAQ Contents Where do I find

  10. Exploring the Business Link Opportunity: Transmission & Clean Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Development in the West | Department of Energy Exploring the Business Link Opportunity: Transmission & Clean Energy Development in the West Exploring the Business Link Opportunity: Transmission & Clean Energy Development in the West February 7-8, 2012 Image of a speaker at the forum. Denver, Colorado Sheraton Denver Downtown Hotel The Tribal Leader Energy Forum, "Exploring the Business Link Opportunity: Transmission & Clean Energy Development in the West, " co-sponsored

  11. Employment at EERE Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    » Employment at EERE Related Links Employment at EERE Related Links If you are considering employment with the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), and even if you already are an EERE employee, you may find the following links helpful: Veterans' Employment Resources The American's Veteran site includes information to help you understand veterans' preference, how federal jobs are filled, and unique veteran appointing authorities designed to

  12. Exploring Competing Kinetic Processes in Quantum Dots Linked...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Competing Kinetic Processes in Quantum Dots Linked to Electrode Surfaces March 14, 2012 at 2:30pm4-349 Mark Hybertsen Brookhaven National Laboratory, Columbia University ...

  13. Radiation Effects Research Foundation Links Past and Future ...

    Energy Savers

    Radiation Effects Research Foundation Links Past and Future August 2009 This document provides historical information about the Radiation Effects Research Foundation and its core ...

  14. WAFER TEST CAVITY -Linking Surface Microstructure to RF Performance...

    Office of Scientific and Technical Information (OSTI)

    WAFER TEST CAVITY -Linking Surface Microstructure to RF Performance: a 'Short--Sample Test Facility' for characterizing superconducting materials for SRF cavities. Citation Details ...

  15. Other EEOICP Links and Previous Federal Register Notices | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Health (NIOSH), Office of Compensation Analysis and Support (OCAS) NIOSH performs dose ... Linking Legacies - the story of the creation and development of the U.S. nuclear ...

  16. California/Transmission/Agency Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    State Agency Links California Department of Fish and Wildlife California Office of Historic Preservation California Department of Transportation California Department of...

  17. Idaho/Transmission/Agency Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    State Agency Links Idaho Department of Fish and Game Idaho State Historical Society Idaho Department of Environmental Quality Idaho Transportation Department Idaho Department of...

  18. Final Progress Report for Linking Ion Solvation and Lithium Battery

    Office of Scientific and Technical Information (OSTI)

    for Linking Ion Solvation and Lithium Battery Electrolyte Properties Henderson, Wesley 25 ENERGY STORAGE battery, electrolyte, solvation, ionic association battery, electrolyte,...

  19. LEDS Collaboration in Action Workshop Links | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    LEDS Collaboration in Action Workshop Links Jump to: navigation, search Low Emission Development Strategies Global Partnership Advancing climate-resilient, low-emission development...

  20. Modification of Lignin by Protein Cross-linking to Facilitate...

    Office of Scientific and Technical Information (OSTI)

    Production of Biofuels From Poplar Citation Details In-Document Search Title: Modification of Lignin by Protein Cross-linking to Facilitate Production of Biofuels From Poplar The ...

  1. An Allosteric Interaction Links USP7 to Deubiquitination and...

    Office of Scientific and Technical Information (OSTI)

    Title: An Allosteric Interaction Links USP7 to Deubiquitination and Chromatin Targeting of UHRF1 Authors: Zhang, Zhi-Min ; Rothbart, Scott B. ; Allison, David F. ; Cai, Qian ; ...

  2. AEC Experiment Establishes Computer Link Between California and...

    Office of Scientific and Technical Information (OSTI)

    in Paris could search a computer in California and display the resulting bibliographic ... AEC EXPERIMENT ESTABLISHES COMPUTER LINK BETWEEN CALIFORNIA AND PARIS The feasibility of a ...

  3. EIS-0503: New England Clean Power Link, Vermont | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Company substation in Cavendish, VT. EIS-0503: New England Clean Power Link, Vermont Public Comment Opportunities No public comment opportunities available at this time. ...

  4. Linking Network Microstructure to Macroscopic Properties of Siloxane...

    Office of Scientific and Technical Information (OSTI)

    Title: Linking Network Microstructure to Macroscopic Properties of Siloxane Elastomers Using Combined Nuclear Magnetic Resonance and Mesoscale Computational Modeling Authors: Mayer...

  5. Adaptation of the control equipment to permit 3-terminal operation of the HVDC link between Sardinia, Corsica and mainland Italy

    SciTech Connect (OSTI)

    Mazzoldi, F.; Taisne, J.P.; Martin, C.J.B.; Rowe, B.A.

    1989-04-01

    After more than 20 years service as a conventional 2-terminal HVdc link, the Sardinia-Mainland Italy hvdc link (200MW, 200kV) is now operating as a three-terminal system. The original control equipment has been modified to allow the introduction of a tapping station on the line for 3-terminal operation. The adaptations to the control equipment, including the means to ensure that the convertors are operated within their capabilities, are explained.

  6. Application of GTO voltage source inverter in a hybrid HVDC link

    SciTech Connect (OSTI)

    Zhao, Z.; Iravani, M.R. . Dept. of Electrical Engineering)

    1994-01-01

    This paper investigates the application of a GTO voltage source inverter in a two-terminal HVdc link, which is fed at the sending end by a line-commutated rectifier. This type of HVdc link may be applied when power transfer is predominantly unidirectional, especially to a weak ac system. The investigations are based on analytical studies and digital time-domain simulations with the Electro-Magnetic Transient program for DC systems (EMTDC). Control method and protection requirements are studied, together with dynamic behavior of the system following disturbances, e.g. dc fault, ac fault, start-up etc. The studies are aimed at exhibiting the technical feasibility of the proposed HVdc scheme. Need for further studies is pointed out when necessary.

  7. Cryogenic sub-system for the 56 MHz SRF storage cavity for RHIC

    SciTech Connect (OSTI)

    Huang, Y.; Than, R.; Orfin, P.; Lederle, D.; Tallerico, T.; Masi L.; Talty, P.; Zhang, Y.

    2011-03-28

    A 56 MHz Superconducting RF Storage Cavity is being constructed for the RHIC collider. This cavity is a quarter wave resonator that will be operated in a liquid helium bath at 4.4 K. The cavity requires an extremely quiet environment to maintain its operating frequency. The cavity, besides being engineered for a mechanically quiet system, also requires a quiet cryogenic system. The helium is taken from RHIC's main helium supply header at 3.5 atm, 5.3K at a phase separator tank. The boil-off is sent back to the RHIC refrigeration system to recover the cooling. To acoustically separate the RHIC helium supply and return lines, a condenser/boiler heat exchanger condenses the helium vapor generated in the RF cavity bath. A system description and operating parameters are given about the cryogen delivery system. The 56 MHz superconducting storage RF cavity project is making progress. The cryogenic system design is in its final stage. The helium supply lines have been tapped into the RHIC helium distribution lines. The plate-and-fin heat exchanger design is near completion and specification will be sent out for bid soon. The cold helium vapor heating system design will start soon as well. A booster compressor specification is underway. The first phase separator and transfer line design work is near completion and will be sent out for bid soon.

  8. Abstract: Development and Deployment of a Short Rotation Woody...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header Abstract: Development and Deployment of a Short Rotation Woody Crops Harvesting ...

  9. DOE BiomassDevelopment and Deployment of a Short Rotation Woody...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    throughput and header feeding issues * Inconsistent chip size and quality * Equipment reliability * Multiple systems tested over the years 1 - Project Overview - Harvesting ...

  10. Temperature dependence of creep compliance of highly cross-linked epoxy: A molecular simulation study

    SciTech Connect (OSTI)

    Khabaz, Fardin Khare, Ketan S. Khare, Rajesh

    2014-05-15

    We have used molecular dynamics (MD) simulations to study the effect of temperature on the creep compliance of neat cross-linked epoxy. Experimental studies of mechanical behavior of cross-linked epoxy in literature commonly report creep compliance values, whereas molecular simulations of these systems have primarily focused on the Youngs modulus. In this work, in order to obtain a more direct comparison between experiments and simulations, atomistically detailed models of the cross-linked epoxy are used to study their creep compliance as a function of temperature using MD simulations. The creep tests are performed by applying a constant tensile stress and monitoring the resulting strain in the system. Our results show that simulated values of creep compliance increase with an increase in both time and temperature. We believe that such calculations of the creep compliance, along with the use of time temperature superposition, hold great promise in connecting the molecular insight obtained from molecular simulation at small length- and time-scales with the experimental behavior of such materials. To the best of our knowledge, this work is the first reported effort that investigates the creep compliance behavior of cross-linked epoxy using MD simulations.

  11. Enzyme linked immunoassay with stabilized polymer saccharide enzyme conjugates

    DOE Patents [OSTI]

    Callstrom, Matthew R. (Columbus, OH); Bednarski, Mark D. (Berkeley, CA); Gruber, Patrick R. (St. Paul, MN)

    1997-01-01

    An improvement in enzyme linked immunoassays is disclosed wherein the enzyme is in the form of a water soluble polymer saccharide conjugate which is stable in hostile environments. The conjugate comprises the enzyme which is linked to the polymer at multiple points through saccharide linker groups.

  12. Linking Network Microstructure to Macroscopic Properties of Siloxane

    Office of Scientific and Technical Information (OSTI)

    Elastomers Using Combined Nuclear Magnetic Resonance and Mesoscale Computational Modeling (Journal Article) | SciTech Connect Journal Article: Linking Network Microstructure to Macroscopic Properties of Siloxane Elastomers Using Combined Nuclear Magnetic Resonance and Mesoscale Computational Modeling Citation Details In-Document Search Title: Linking Network Microstructure to Macroscopic Properties of Siloxane Elastomers Using Combined Nuclear Magnetic Resonance and Mesoscale Computational

  13. Enzyme linked immunoassay with stabilized polymer saccharide enzyme conjugates

    DOE Patents [OSTI]

    Callstrom, M.R.; Bednarski, M.D.; Gruber, P.R.

    1997-11-25

    An improvement in enzyme linked immunoassays is disclosed wherein the enzyme is in the form of a water soluble polymer saccharide conjugate which is stable in hostile environments. The conjugate comprises the enzyme which is linked to the polymer at multiple points through saccharide linker groups. 19 figs.

  14. Key_E-Link_metadata.png | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information Key_E-Link_metadata.png

  15. Economizer recirculation for low-load stability in heat recovery steam generator

    SciTech Connect (OSTI)

    Cuscino, R.T.; Shade, R.L. Jr.

    1986-04-15

    An economizer system is described for heating feedwater in a heat recovery steam generator which consists of: at least first and second economizer tube planes; each of the economizer tube planes including a plurality of generally parallel tubes; the tubes being generally vertically disposed; each of the economizer tube planes including a top header and a bottom header; all of the plurality of tubes in each economizer tube plane being connected in parallel to their top and bottom headers whereby parallel feedwater flow through the plurality of tubes between the top and bottom headers is enabled; one of the top and bottom headers being an inlet header; a second of the top and bottom headers being an outlet header; a boiler feed pump; the boiler feed pump being effective for applying a flow of feedwater to the inlet header; means for serially interconnecting the economizer tube planes; the means for serially interconnecting including means for flowing the feedwater upward and downward in tubes of alternating ones of the economizer tube planes between the inlet header and the outlet header; means for conveying heated feedwater from the outlet header to a using process; means for recirculating at least a portion of the heated feedwater from the outlet header to an inlet of the boiler feed pump; and the means for recirculating including means for relating the portion to a steam load in the using process whereby an increased flow is produced through all of the economizer tube planes at values of the steam load below a predetermined value and a condition permitting initiation of reverse flow in any of the tubes is substantially reduced.

  16. Vehicle brake testing system

    DOE Patents [OSTI]

    Stevens, Samuel S.; Hodgson, Jeffrey W.

    2002-11-19

    This invention relates to a force measuring system capable of measuring forces associated with vehicle braking and of evaluating braking performance. The disclosure concerns an invention which comprises a first row of linearly aligned plates, a force bearing surface extending beneath and beside the plates, vertically oriented links and horizontally oriented links connecting each plate to a force bearing surface, a force measuring device in each link, a transducer coupled to each force measuring device, and a computing device coupled to receive an output signal from the transducer indicative of measured force in each force measuring device. The present invention may be used for testing vehicle brake systems.

  17. Tank waste remediation system process engineering instruction manual

    SciTech Connect (OSTI)

    ADAMS, M.R.

    1998-11-04

    The purpose of the Tank Waste Remediation System (TWRS) Process Engineering Instruction Manual is to provide guidance and direction to TWRS Process Engineering staff regarding conduct of business. The objective is to establish a disciplined and consistent approach to business such that the work processes within TWRS Process Engineering are safe, high quality, disciplined, efficient, and consistent with Lockheed Martin Hanford Corporation Policies and Procedures. The sections within this manual are of two types: for compliance and for guidance. For compliance sections are intended to be followed per-the-letter until such time as they are formally changed per Section 2.0 of this manual. For guidance sections are intended to be used by the staff for guidance in the conduct of work where technical judgment and discernment are required. The guidance sections shall also be changed per Section 2.0 of this manual. The required header for each manual section is illustrated in Section 2.0, Manual Change Control procedure. It is intended that this manual be used as a training and indoctrination resource for employees of the TWRS Process Engineering organization. The manual shall be required reading for all TWRS Process Engineering staff, matrixed, and subcontracted employees.

  18. Hybrid Multidimensional Relational and Link Analytical Knowledge Discovery for Law Enforcement

    SciTech Connect (OSTI)

    Joslyn, Cliff A.; Gillen, David S.; Burke, John S.; Critchlow, Terence J.; Damante, Matt; Fernandes, Robert

    2008-08-01

    The challenges facing the Department of Homeland Security (DHS) require not only multi-dimensional, but also multi-scale data analysis. In particular, the ability to seamlessly move from summary information, such as trends, into detailed analysis of individual entities, while critical for law enforcement, typically requires manually transferring information among multiple tools. Such time-consuming and error prone processes significantly hamper the analysts' ability to quickly explore data and identify threats. As part of a DHS Science and Technology effort, we have been developing and deploying for Immigration and Customs Enforcement the CubeLink system integrating information between relational data cubes and link analytical semantic graphs. In this paper we describe CubeLink in terms of the underlying components, their integration, and the formal mapping from multidimensional data analysis into link analysis. In so doing, we provide a formal basis for one particular form of automatic schema-ontology mapping from OLAP data cubes to semantic graphs databases, and point the way towards future ``intelligent'' OLAP data cubes equipped with meta-data about their dimensional typing.

  19. Reference Links | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    IL 60439 P: (630) 252-2110 Kenneth Tarcza U.S. Department of Energy 200 Administration Road Oak Ridge, TN 37830 P: (865) 576-4444 Privacy Act Reference Links Print Text Size: A A ...

  20. Mach-Zehnder Fiber-Optic Links for ICF Diagnostics

    SciTech Connect (OSTI)

    Miller, E. K., Hermann, H. W.

    2012-11-01

    This article describes the operation and evolution of Mach-Zehnder links for single-point detectors in inertial confinement fusion experimental facilities, based on the Gamma Reaction History (GRH) diagnostic at the National Ignition Facility.

  1. IDENTIFYING GENES CONTROLLING FERULATE CROSS-LINKING FORMATION...

    Office of Scientific and Technical Information (OSTI)

    of cross-linking and in turn impact biomass utility for forage and biofuel production. ... gene in the cell wall of maize or other biofuel crops, aiming to improve their ...

  2. Property:Incentive/Auth5Link | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    "IncentiveAuth5Link" Showing 25 pages using this property. (previous 25) (next 25) A Alternative Energy Portfolio Standard (Pennsylvania) + http:www.puc.state.pa.usPcDocs...

  3. Reference Linking at the DOE Office of Scientific and Technical...

    Office of Scientific and Technical Information (OSTI)

    Reference Linking at the DOE Office of Scientific and Technical Information The usefulness of electronic R&D reports, such as those accessed via the DOE Information Bridge, is ...

  4. Recent content in Linked Open Data Workshop in Washington, D...

    Open Energy Information (Open El) [EERE & EIA]

    Recent content in Linked Open Data Workshop in Washington, D.C. Home Name Post date sort icon Type Detailed Planning Kicks Off Jweers 27 Sep 2012 - 06:53 Blog entry Notes from the...

  5. Widget:ExternalLinkButton | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    with spaces (i.e.- btn-primary) style - add style elements, cannot change button color with this (optional) Examples Default Button Visit FWA Widget:ExternalLinkButton |...

  6. Mechanism of DNA interstrand cross-link processing by repair...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Mechanism of DNA interstrand cross-link processing by repair nuclease FAN1 Citation Details In-Document Search Title: Mechanism of ...

  7. Giant magnetic effects and oscillations in antiferromagnetic Josephson weak links

    SciTech Connect (OSTI)

    Gorkov, L.; Kresin, Vladimir

    2001-04-01

    Josephson junctions with an antiferromagnetic metal as a link are described. The junction can be switched off by a relatively small magnetic field. The amplitude of the current oscillates as a function of the field.

  8. Linking Legacies: Connecting the Cold War Nuclear Weapons Production

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Processes to Their Environmental Consequences | Department of Energy Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their Environmental Consequences Linking Legacies: Connecting the Cold War Nuclear Weapons Production Processes to Their Environmental Consequences This report described each step in the cycle of nuclear weapons production and defined for the first time a planned disposition path for all waste streams generated prior to 1992 as a result of

  9. Links | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Links Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources NP Workforce Survey Results .pdf file (182KB) Links News Archives Databases Reports Workshops Nuclear Physics Related Brochures and Videos Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email

  10. Uniform Methods Project Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project Related Links Uniform Methods Project Related Links The websites and publications listed below provide supporting information for the Uniform Methods Project and for evaluation, measurement, and verification (EM&V) of energy efficiency programs. Glossaries of EM&V Terms Federal EM&V Resources International Resources Related Standards Glossaries of EM&V Terms The following glossaries provide definitions of technical language and EM&V terms. Appendix A: Glossary of

  11. Final progress report for linking ion solvation and lithium battery

    Office of Scientific and Technical Information (OSTI)

    electrolyte properties (Technical Report) | SciTech Connect progress report for linking ion solvation and lithium battery electrolyte properties Citation Details In-Document Search Title: Final progress report for linking ion solvation and lithium battery electrolyte properties The research objective of this proposal was to provide a detailed analysis of how solvent and anion structure govern the solvation state of Li+ cations in solvent-LiX mixtures and how this, in turn, dictates the

  12. IDENTIFYING GENES CONTROLLING FERULATE CROSS-LINKING FORMATION IN GRASS

    Office of Scientific and Technical Information (OSTI)

    CELL WALLS (Technical Report) | SciTech Connect IDENTIFYING GENES CONTROLLING FERULATE CROSS-LINKING FORMATION IN GRASS CELL WALLS Citation Details In-Document Search Title: IDENTIFYING GENES CONTROLLING FERULATE CROSS-LINKING FORMATION IN GRASS CELL WALLS DESCRIPTION/ABSTRACT This proposal focuses on cell wall feruloylation and our long term goal is to identify and isolate novel genes controlling feruloylation and to characterize the phenotype of mutants in this pathway, with a spotlight on

  13. CT Scan of Earth Links Mantle Plumes with Volcanic Hotspots

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    CT Scan of Earth Links Mantle Plumes with Volcanic Hotspots CT Scan of Earth Links Mantle Plumes with Volcanic Hotspots Simulations Run at NERSC Show How Seismic Waves Travel Through Mantle September 2, 2015 Robert Sanders, rlsanders@berkeley.edu, (510) 643-6998 NERSC PI: Barbara Romanowicz Lead Institution: University of California, Berkeley Project Title: Imaging and Calibration of Mantle Structure at Global and Regional Scales Using Full-Waveform Seismic Tomography NERSC Resources Used:

  14. Voluntary Protection Program - Related Links | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    - Related Links Voluntary Protection Program - Related Links VPPPA - The Voluntary Protection Programs Participants' Association, a non- profit organization is leading the way in safety, health, and environmental excellence through cooperative efforts among labor, management, and government. http://www.vpppa.org. OSHA VPP - The United States Department of Labor, Occupational Safety and Health Administration - Voluntary Protection Program http://www.osha.gov/dcsp/vpp/index.html State VPP Programs

  15. Scientists call for antibody 'bar code' system to follow Human...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Scientists call for antibody 'bar code' system to follow Human Genome Project Alumni Link: ... Scientists call for antibody 'bar code' system to follow Human Genome Project Researchers ...

  16. Toroidal magnet system

    DOE Patents [OSTI]

    Ohkawa, Tihiro; Baker, Charles C.

    1981-01-01

    In a plasma device having a toroidal plasma containment vessel, a toroidal field-generating coil system includes fixed linking coils each formed of first and second sections with the first section passing through a central opening through the containment vessel and the second section completing the linking coil to link the containment vessel. A plurality of removable unlinked coils are each formed of first and second C-shaped sections joined to each other at their open ends with their bights spaced apart. The second C-shaped section of each movable coil is removably mounted adjacent the second section of a linking coil, with the containment vessel disposed between the open ends of the first and second C-shaped sections. Electric current is passed through the linking and removable coils in opposite sense in the respective adjacent second sections to produce a net toroidal field.

  17. A Robust Infrastructure Design for Gas Centrifuge Enrichment Plant Unattended Online Enrichment Monitoring

    SciTech Connect (OSTI)

    Younkin, James R; Rowe, Nathan C; Garner, James R

    2012-01-01

    An online enrichment monitor (OLEM) is being developed to continuously measure the relative isotopic composition of UF6 in the unit header pipes of a gas centrifuge enrichment plant (GCEP). From a safeguards perspective, OLEM will provide early detection of a facility being misused for production of highly enriched uranium. OLEM may also reduce the number of samples collected for destructive assay and if coupled with load cell monitoring can provide isotope mass balance verification. The OLEM design includes power and network connections for continuous monitoring of the UF6 enrichment and state of health of the instrument. Monitoring the enrichment on all header pipes at a typical GCEP could require OLEM detectors on each of the product, tails, and feed header pipes. If there are eight process units, up to 24 detectors may be required at a modern GCEP. Distant locations, harsh industrial environments, and safeguards continuity of knowledge requirements all place certain demands on the network robustness and power reliability. This paper describes the infrastructure and architecture of an OLEM system based on OLEM collection nodes on the unit header pipes and power and network support nodes for groupings of the collection nodes. A redundant, self-healing communications network, distributed backup power, and a secure communications methodology. Two candidate technologies being considered for secure communications are the Object Linking and Embedding for Process Control Unified Architecture cross-platform, service-oriented architecture model for process control communications and the emerging IAEA Real-time And INtegrated STream-Oriented Remote Monitoring (RAINSTORM) framework to provide the common secure communication infrastructure for remote, unattended monitoring systems. The proposed infrastructure design offers modular, commercial components, plug-and-play extensibility for GCEP deployments, and is intended to meet the guidelines and requirements for unattended

  18. Direct-Steam Linear Fresnel Performance Model for NREL's System Advisor Model

    SciTech Connect (OSTI)

    Wagner, M. J.; Zhu, G.

    2012-09-01

    This paper presents the technical formulation and demonstrated model performance results of a new direct-steam-generation (DSG) model in NREL's System Advisor Model (SAM). The model predicts the annual electricity production of a wide range of system configurations within the DSG Linear Fresnel technology by modeling hourly performance of the plant in detail. The quasi-steady-state formulation allows users to investigate energy and mass flows, operating temperatures, and pressure drops for geometries and solar field configurations of interest. The model includes tools for heat loss calculation using either empirical polynomial heat loss curves as a function of steam temperature, ambient temperature, and wind velocity, or a detailed evacuated tube receiver heat loss model. Thermal losses are evaluated using a computationally efficient nodal approach, where the solar field and headers are discretized into multiple nodes where heat losses, thermal inertia, steam conditions (including pressure, temperature, enthalpy, etc.) are individually evaluated during each time step of the simulation. This paper discusses the mathematical formulation for the solar field model and describes how the solar field is integrated with the other subsystem models, including the power cycle and optional auxiliary fossil system. Model results are also presented to demonstrate plant behavior in the various operating modes.

  19. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Linked Open Data Workshop in Washington, D.C. Home > Linked Open Data Workshop in Washington, D.C. > Posts by term > Linked Open Data Workshop in Washington, D.C. Content Group...

  20. New England Clean Power Link Project Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cover Photo Credits 1. TDI-NE (http://wamc/files/styles/default/public/201410/new-england-clean-power-link-map- ctsy-tdi-new-england.jpg" alt="">) 2. NECPL exit from Lake Champlain (Benson, Vermont) courtesy of TDI-NE 3. Lake Bomoseen, Fair Haven, Vermont courtesy of TDI-NE 4. TDI-NE 2014a 1 3 2 4 FINAL NEW ENGLAND CLEAN POWER LINK PROJECT ENVIRONMENTAL IMPACT STATEMENT DOE/EIS-0503 VOLUME I: IMPACT ANALYSES U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY

  1. New England Clean Power Link Project Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FINAL NEW ENGLAND CLEAN POWER LINK PROJECT ENVIRONMENTAL IMPACT STATEMENT DOE/EIS-0503 SUMMARY U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY COOPERATING AGENCIES U.S. ENVIRONMENTAL PROTECTION AGENCY U.S. ARMY CORPS OF ENGINEERS U.S. COAST GUARD OCTOBER 2015 This Page Intentionally Left Blank Final New England Clean Power Link EIS U.S. Department of Energy October 2015 i COVER SHEET RESPONSIBLE FEDERAL AGENCY U.S. Department of Energy (DOE), Office of

  2. New England Clean Power Link Project Final Environmental Impact Statement

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Credits 1. TDI-NE (http://wamc/files/styles/default/public/201410/new-england-clean-power-link-map-ctsy- tdi-new-england.jpg" alt="">) 2. NECPL exit from Lake Champlain (Benson, Vermont) courtesy of TDI-NE 3. Lake Bomoseen, Fair Haven, Vermont courtesy of TDI-NE 4. TDI-NE 2014a 1 3 2 4 FINAL NEW ENGLAND CLEAN POWER LINK PROJECT ENVIRONMENTAL IMPACT STATEMENT DOE/EIS-0503 VOLUME II: APPENDICES U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY

  3. PROJECT PROFILE: CelLink Corporation (SolarMat 3) | Department...

    Energy.gov (indexed) [DOE]

    CelLink's project is designed to help the crystalline silicone PV industry transition from ... CelLink will use its proprietary interconnection approach to explore new fabrication ...

  4. Fault isolation through no-overhead link level CRC

    DOE Patents [OSTI]

    Chen, Dong; Coteus, Paul W.; Gara, Alan G.

    2007-04-24

    A fault isolation technique for checking the accuracy of data packets transmitted between nodes of a parallel processor. An independent crc is kept of all data sent from one processor to another, and received from one processor to another. At the end of each checkpoint, the crcs are compared. If they do not match, there was an error. The crcs may be cleared and restarted at each checkpoint. In the preferred embodiment, the basic functionality is to calculate a CRC of all packet data that has been successfully transmitted across a given link. This CRC is done on both ends of the link, thereby allowing an independent check on all data believed to have been correctly transmitted. Preferably, all links have this CRC coverage, and the CRC used in this link level check is different from that used in the packet transfer protocol. This independent check, if successfully passed, virtually eliminates the possibility that any data errors were missed during the previous transfer period.

  5. Acidbase bifunctional shell cross-linked micelle nanoreactor for one-pot tandem reaction

    DOE PAGES-Beta [OSTI]

    Lee, Li -Chen; Lu, Jie; Weck, Marcus; Jones, Christopher W.

    2015-12-29

    Shell cross-linked micelles (SCMs) containing acid sites in the shell and base sites in the core are prepared from amphiphilic poly(2-oxazoline) triblock copolymers. The materials are utilized as two-chamber nanoreactors for a prototypical acid-base bifunctional tandem deacetalization-nitroaldol reaction. Furthermore, the acid and base sites are localized in different regions of the micelle, allowing the two steps in the reaction sequence to largely proceed in separate compartments, akin to the compartmentalization that occurs in biological systems.

  6. Acid–base bifunctional shell cross-linked micelle nanoreactor for one-pot tandem reaction

    SciTech Connect (OSTI)

    Lee, Li -Chen; Lu, Jie; Weck, Marcus; Jones, Christopher W.

    2015-12-29

    Shell cross-linked micelles (SCMs) containing acid sites in the shell and base sites in the core are prepared from amphiphilic poly(2-oxazoline) triblock copolymers. The materials are utilized as two-chamber nanoreactors for a prototypical acid-base bifunctional tandem deacetalization-nitroaldol reaction. Furthermore, the acid and base sites are localized in different regions of the micelle, allowing the two steps in the reaction sequence to largely proceed in separate compartments, akin to the compartmentalization that occurs in biological systems.

  7. U-134: Apache Traffic Server Host Header Processing Flaw Lets Remote Users Deny Service

    Energy.gov [DOE]

    A vulnerability was reported in Apache Traffic Server. A remote user can cause denial of service conditions.

  8. 2015 OSTIblog top header text | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    U.S. Department of Energy Office of Scientific and Technical Information Printer-friendly version Printer-friendly version User login (If you're a human, don't change the following...

  9. 2015 OSTIblog top header image and slogan | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    Accelerating Science Discovery - Join the Discussion Printer-friendly version Printer-friendly version User login (If you're a human, don't change the following field) Enter your...

  10. Header Sheet Doc ID Z OAK RIDGE NATIONAL LABORATORY M. E. Murray

    Office of Legacy Management (LM)

    ... DOEM: A. Jd IRFORBATKNITICHNOLOWY DOEIREAL EBTATE C.H PitaiamcomTrIOLS MPA F R TECK-MCAL VtEpOfm aNa. 0. ms CLYTRAL TOOLS a yoummENT D.D.Vkv 'DW' RECDANP0110WITORY SAX PROGRANI ...

  11. Li corrosion resistant glasses for headers in ambient temperature Li batteries

    DOE Patents [OSTI]

    Hellstrom, E.E.; Watkins, R.D.

    1985-10-11

    Glass compositions containing 10 to 50 mol% CaO, 10 to 50 mol% Al/sub 2/O/sub 3/, 30 to 60 mol% B/sub 2/O/sub 3/, and 0 to 30 mol% MgO are provided. These compositions are capable of forming a stable glass-to-metal seal possessing electrical insulating properties for use in a lithium battery. Also provided are lithium cells containing a stainless steel body and molybdenum center pin electrically insulated by means of a seal produced according to the invention.

  12. Microsoft Word - 04EWEA_SpectralLoading_6c_Header.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    have been poorly represented in earlier studies. This formulation allows the effects of mean stress on damage calculations to be evaluated. Using field data from the Long term...

  13. Please join us for a triple-header seminar organized around Modeling...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    existing tools. We also showed that different knowledge-based strategies (mixture models, machine learning or hybrid potential functions) improve the predictions. Due to the...

  14. Building America Top Innovations 2012: Advanced Framing Systems and Packages

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  15. Advanced Framing Systems and Packages- Building America Top Innovation

    Energy.gov [DOE]

    This Building America Innovations profile describes Building America research showing advanced 2x6, 24-inch on-center framing, single top plates, open headers, and 2-stud corners reduced board feet of lumber by more than 1,000 feet, cut energy use by 13%, and cut material and labor costs by more than $1,000 on a typical home.

  16. Complex Systems | NISAC

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Systems

  17. Laser Safety Method For Duplex Open Loop Parallel Optical Link

    DOE Patents [OSTI]

    Baumgartner, Steven John; Hedin, Daniel Scott; Paschal, Matthew James

    2003-12-02

    A method and apparatus are provided to ensure that laser optical power does not exceed a "safe" level in an open loop parallel optical link in the event that a fiber optic ribbon cable is broken or otherwise severed. A duplex parallel optical link includes a transmitter and receiver pair and a fiber optic ribbon that includes a designated number of channels that cannot be split. The duplex transceiver includes a corresponding transmitter and receiver that are physically attached to each other and cannot be detached therefrom, so as to ensure safe, laser optical power in the event that the fiber optic ribbon cable is broken or severed. Safe optical power is ensured by redundant current and voltage safety checks.

  18. BRCA1-linked marker in postmenopausal breast cancer families

    SciTech Connect (OSTI)

    Folsom, A.R.; Chen, P.L.; Sellers, T.A.

    1994-09-01

    A majority of breast and ovarian cancer families and half of the early-onset breast cancer families are linked to markers on 17q (BRCA1). While linkage has been demonstrated in families with premenopausal disease, few studies have tested these markers in families with postmenopausal breast cancer. In the Iowa Women`s Health Study, a population-based study of over 42,000 women, an association of waist-to-hip ratio (WHR) with the risk of postmenopausal breast cancer was found predominantly in women with a positive family history -- this interaction was associated with a 3.2-fold elevated risk. This effect was even more pronounced when the definition of family history included breast and ovarian cancer, known to be linked to 17q markers. We evaluated evidence for linkage with D17S579, a BRCA-1-linked marker, in 13 families in which the index case had postmenopausal breast cancer. Genotyping for alleles at D17S579 was performed on 84 blood samples. Linkage analysis assumed that the breast cancer trait had an autosomal dominant mode of inheritance with a penetrance of 80%. For the 13 families studied, the maximum lod score was 0.29 at a theta of 0.27. There was significant evidence against tight linkage of breast cancer with D17S579 (theta<0.4). Heterogeneity analysis suggested evidence for the presence of both linked and unlinked families. Partitioning informative families on WHR of the index case suggested heterogeneity. These data suggest that, in a subset of families identified by a postmenopausal breast cancer proband, risk of breast cancer may be mediated by BRCA1, with heterogeneity defined by WHR.

  19. GLAMM: Genome-Linked Application for Metabolic Maps

    SciTech Connect (OSTI)

    Bates, John; Chivian, Dylan; Arkin, Adam

    2011-05-29

    The Genome-Linked Application for Metabolic Maps (GLAMM) is a unified web interface for visualizing metabolic networks, reconstructing metabolic networks from annotated genome data, visualizing experimental data in the context of metabolic networks, and investigating the construction of novel, transgenic pathways. This simple, user-friendly interface is tightly integrated with the comparative genomics tools of MicrobesOnline. GLAMM is available for free to the scientific community at glamm.lbl.gov.

  20. New Guide Helps Industry Link with Department of Energy Labs

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    New Guide Helps Industry Link with Department of Energy Labs For more information contact: George Douglas, 303-275-4096 email: George Douglas Golden, Colo., May. 4, 2001 - Working with U. S. Department of Energy (DOE) laboratories became easier with the recent release of the guide, Doing Business with the Laboratories of the Laboratory Coordinating Council. The guide explains how the DOE's Laboratory Coordinating Council gives U.S. industry access to a "virtual" laboratory that can be

  1. Exploring Competing Kinetic Processes in Quantum Dots Linked to Electrode

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Surfaces | MIT-Harvard Center for Excitonics Competing Kinetic Processes in Quantum Dots Linked to Electrode Surfaces March 14, 2012 at 2:30pm/4-349 Mark Hybertsen Brookhaven National Laboratory, Columbia University Mark_Hybertsen001_000 Abstract: Exploiting the unique properties of nanostructured chromophores for light harvesting applications relies on the balance between competing kinetic processes including energy transfer, carrier relaxation and carrier tunneling. In the first part of

  2. Wideband precision analog telemetry link using digital techniques

    SciTech Connect (OSTI)

    Hearn, W.E.

    1982-10-01

    A highly linear Wideband Analog Fiber Optic Link is described which samples at a 1 MHz rate with 10-bit accuracy and transmits and receives by means of a high speed PDM code. Aliasing and sampling effects are fully suppressed and a nearly Gaussian pulse response is attained with a 2 ..mu..sec risetime. Analog signals are recovered with very low distortion and d.c. drift and a S/N ratio of better than 52 db.

  3. References & Links | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    References & Links 48CFR Chapter 9, Acquisition Regulation (DEAR) Department of Energy Acquisition Requirements (DEAR) DOE Order 470.4B, Safeguards and Security Program DOE Order 472.2, Personnel Security DOE Order 206.2 DOE Order 470.4B Executive Order 10865 Executive Order 12968 Federal Acquisition Regulation (FAR) Federal Bureau of Investigations FIPS PUB 201-2, Personal Identity Verification (PIV) of Federal Employees and Contractors Intelligence Reform and Terrorism Prevention Act of

  4. ARM - Publications: Science Team Meeting Documents: Linking subgrid-scale

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    variability in temperature and humidty to convection Linking subgrid-scale variability in temperature and humidty to convection Pincus, Robert NOAA-CIRES Climate Diagnostics Center Neale, Richard NOAA-CIRES Climate Diagnostics Center Batstone, Crispian NOAA-CIRES Climate Diagnostics Center Klein, Stephen Lawrence Livermore National Laboratory Convection parameterizations in large-scale models (e.g. Relaxed Arakawa-Schubert) compute the domain-averaged mass flux as the sum across a spectrum

  5. Optical analog data link with simple self-test feature

    DOE Patents [OSTI]

    Witkover, R.L.

    1984-02-01

    A communications circuit for optically transmitting analog data signals free of excessive ripple, while having rapid response time. The invention is further characterized by being adapted to provide an immediate indication of the failure of the optical transmission link of the circuit. Commerically available voltage to frequency converter chips are used in conjunction with suitable wiring arrays and in combination with readily available indicator means for constructing the communication circuit of the invention. A V/F converter in the communications circuit is coupled to an offset adjustment means to cause the converter to continuously produce a string of output voltage pulses having a frequency of about 1Khz responsive to the input analog signal to the converter being zero. The continuous presence of the 1Khz frequency on the optical transmission link is monitored at the receiving end of the communication circuit and the indicator means is connected to immediately provide an easily detected indication of a failure of the optical transmission link to transmit the 1Khz frequency pulses.

  6. Characterization of Gigabit Ethernet Over Highly Turbulent Optical Wireless Links

    SciTech Connect (OSTI)

    Johnson, G W; Cornish, J P; Wilburn, J W; Young, R A; Ruggiero, A J

    2002-07-01

    We report on the performance characterization and issues associated with using Gigabit Ethernet (GigE) over a highly turbulent (C{sub n}{sup 2} > 10{sup -12}) 1.3 km air-optic lasercom links. Commercial GigE hardware is a cost-effective and scalable physical layer standard that can be applied to air-optic communications. We demonstrate a simple GigE hardware interface to a singlemode fiber-coupled, 1550 nm, WDM air-optic transceiver. TCPAP serves as a robust and universal foundation protocol that has some tolerance of data loss due to atmospheric fading. Challenges include establishing and maintaining a connection with acceptable throughput under poor propagation conditions. The most useful link performance diagnostic is shown to be scintillation index, where a value of 0.2 is the maximum permissible for adequate GigE throughput. Maximum GigE throughput observed was 49.7% of that obtained with a fiber jumper when scintillation index is 0.1. Shortcomings in conventional measurements such as bit error rate are apparent. Prospects for forward mor correction and other link enhancements will be discussed.

  7. Optical analog data link with simple self-test feature

    DOE Patents [OSTI]

    Witkover, Richard L.

    1986-01-01

    A communications circuit for optically transmitting analog data signals free of excessive ripple, while having rapid response time. The invention is further characterized by being adapted to provide an immediate indication of the failure of the optical transmission link of the circuit. Commercially available voltage to frequency converter chips are used in conjunction with suitable wiring arrays and in combination with readily available indicator means for constructing the communication circuit of the invention. A V/F converter in the communications circuit is coupled to an offset adjustment means to cause the converter to continuously produce a string of output voltage pulses having a frequency of about 1 Khz responsive to the input analog signal to the converter being zero. The continuous presence of the 1 Khz frequency on the optical transmission link is monitored at the receiving end of the communication circuit and the indicator means is connected to immediately provide an easily detected indication of a failure of the optical transmission link to transmit the 1 Khz frequency pulses.

  8. OSTIblog Articles in the reference linking Topic | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information reference linking Topic OSTI and Reference Linking by Daphne Evans 13 May, 2008 in Technology OSTI actively supports the practice of Reference Linking. Also referred to as citation linking, reference linking adds value to technical reports and journal articles by hyperlinking the references at the end of the document. Authors frequently cite numerous supporting reports and articles. However, locating these cited works can be difficult. If these

  9. Missing links in the root-soil organic matter continuum

    SciTech Connect (OSTI)

    O'Brien, Sarah L.; Iversen, Colleen M

    2009-01-01

    The soil environment remains one of the most complex and poorly understood research frontiers in ecology. Soil organic matter (SOM), which spans a continuum from fresh detritus to highly processed, mineral-associated organic matter, is the foundation of sustainable terrestrial ecosystems. Heterogeneous SOM pools are fueled by inputs from living and dead plants, driven by the activity of micro- and mesofauna, and are shaped by a multitude of abiotic factors. The specialization required to measure unseen processes that occur on a wide range of spatial and temporal scales has led to the partitioning of soil ecology research across several disciplines. In the organized oral session 'Missing links in the root-soil organic matter continuum' at the annual Ecological Society of America meeting in Albuquerque, NM, USA, we joined the call for greater communication and collaboration among ecologists who work at the root-soil interface (e.g. Coleman, 2008). Our goal was to bridge the gap between scientific disciplines and to synthesize disconnected pieces of knowledge from root-centric and soil-centric studies into an integrated understanding of belowground ecosystem processes. We focused this report around three compelling themes that arose from the session: (1) the influence of the rhizosphere on SOM cycling, (2) the role of soil heterotrophs in driving the transformation of root detritus to SOM, and (3) the controlling influence of the soil environment on SOM dynamics. We conclude with a discussion of new approaches for gathering data to bridge gaps in the root-SOM continuum and to inform the next generation of ecosystem models. Although leaf litter has often been considered to be the main source of organic inputs to soil, Ann Russell synthesized a convincing body of work demonstrating that roots, rather than surface residues, control the accumulation of SOM in a variety of ecosystems. Living roots, which are chemically diverse and highly dynamic, also influence a wide

  10. Impute DC link (IDCL) cell based power converters and control thereof

    DOE Patents [OSTI]

    Divan, Deepakraj M.; Prasai, Anish; Hernendez, Jorge; Moghe, Rohit; Iyer, Amrit; Kandula, Rajendra Prasad

    2016-04-26

    Power flow controllers based on Imputed DC Link (IDCL) cells are provided. The IDCL cell is a self-contained power electronic building block (PEBB). The IDCL cell may be stacked in series and parallel to achieve power flow control at higher voltage and current levels. Each IDCL cell may comprise a gate drive, a voltage sharing module, and a thermal management component in order to facilitate easy integration of the cell into a variety of applications. By providing direct AC conversion, the IDCL cell based AC/AC converters reduce device count, eliminate the use of electrolytic capacitors that have life and reliability issues, and improve system efficiency compared with similarly rated back-to-back inverter system.

  11. Website Policies and Important Links | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    Comments Policy USAJOBS Grants Regulations USA.gov Disclaimer This system is made ... individual user, or automated means to query, capture, or download data from this system. ...

  12. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  13. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N.; Holland, Rodney H.

    2012-04-17

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  14. Hybrid Wind and Solar Electric Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the storage capacity must be large enough to supply electrical needs during non-charging periods. Battery banks ... Small stand-alone home energy systems Links Federal tax ...

  15. Nevada Division of Environmental Protection online NOI system...

    Open Energy Information (Open El) [EERE & EIA]

    2012 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Nevada Division of Environmental Protection online NOI system Citation...

  16. Analysis of variable-frequency currents superimposed on DC currents in asynchronous HVDC Links in stressing turbine-generator-exciter shafts

    SciTech Connect (OSTI)

    Hammons, T.J.; Bremner, J.J.

    1995-03-01

    Ripple currents on the DC side of both HVDC asynchronous and synchronous Links can excite in some circumstances onerous torsional vibrations in large steam generator shafts. The problem has assumed importance in recent months on account of the HVDC Link between Scotland and Northern Ireland going ahead, on account of the proposed Eire/Wales Link, because AC/DC/AC couplers are to be installed to interconnect the East and West European Grid Systems, and because resonances have been observed on machines in close proximity to AC/DCIAC couplers and HVDC Links. This paper discusses and analyses excitation of shaft torsional vibrations in steam turbine-generator-exciter shafts in close proximity to HVDC converter stations by variable-frequency ripple currents superimposed on DC currents in asynchronous Links. It presents technical knowledge not arranged for convenient reference heretofore in studying possible excitation of turbine-generator-v/ exciter shaft torsional vibrations by non-characteristic HVDC converter harmonic currents if a machine should be considered to be at risk. Shaft torques in multi-machine networks are evaluated by proportioning HVDC Link disturbance currents to each machine at risk using system network data, generator data and fault analysis data considering frequency dependence of the system parameters. This scaling factor is calculated for different scenarios of system operation and load. Equivalent circuits for the synchronous generator are employed appropriately to correlate HVDC Link disturbance current impressed on the generator stator with s state torque excitation from which magnitude of turbine-generator-exciter shaft torque is deduced.

  17. Proposed paper: Linking NDE to component life-cycle decisions for fossil power plants

    SciTech Connect (OSTI)

    Tilley, R.

    1996-12-31

    In the changing US utility industry, competition for customers is placing ever increasing pressure to reduce operating and maintenance costs for generating facilities. A key challenge in this cost-cutting process is to obtain such reductions without compromising plant safety or reliability. To meet such a challenge will require a much tighter coupling of component inspection activities with decisions on component life. Past utility practices for fossil units have focused on performing periodic inspections and then reacting to any findings from such inspections. In the current environment, the process needs to provide a close integration of NDE activities with the component damage models to ensure an optimal program of where to inspect, how to inspect, and when to inspect. This paper will review current state-of-activities and provide recommendations on achieving such an integrated process. An example case will be developed for a typical, fossil plant, high temperature header. Visualization software is becoming an everyday tool in NDE. However, it has never been so difficult to find a package that fulfills the needs of a research laboratory. Issues such as price, availability for a given platform, learning curves make the choice even harder. This paper describes our experience at Lawrence Livermore National Laboratory with various visualization packages. We will show how the problems encountered with large data sets led us to use popular scripting languages such as Tcl/Tk or Perl. By coupling these languages with standard toolkits as XLib and OpenGL, powerful, flexible, user-friendly and machine-independent tools can be designed rapidly. We will describe X-ray CT industrial and biomedical applications that made use of this approach, and show how their requirements were taken into account.

  18. DOE and Fusion Links | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DOE and Fusion Links United States Department of Energy U.S. Department of Energy Office of Science Office of Fusion Energy Sciences U.S. D.O.E. Princeton Site Office Map showing U.S. Fusion Program Participants U.S. D.O.E. Science Laboratories U.S. D.O.E. User Facilities U.S. D.O.E. Funding Opportunities Other Fusion Research Sites United States Sites General Atomics (GA) MIT Plasma Science and Fusion Center U.S. ITER National Ignition Facility (NIF) American Fusion News International Sites

  19. Techniques in teaching statistics : linking research production and research use.

    SciTech Connect (OSTI)

    Martinez-Moyano, I .; Smith, A.

    2012-01-01

    In the spirit of closing the 'research-practice gap,' the authors extend evidence-based principles to statistics instruction in social science graduate education. The authors employ a Delphi method to survey experienced statistics instructors to identify teaching techniques to overcome the challenges inherent in teaching statistics to students enrolled in practitioner-oriented master's degree programs. Among the teaching techniques identi?ed as essential are using real-life examples, requiring data collection exercises, and emphasizing interpretation rather than results. Building on existing research, preliminary interviews, and the ?ndings from the study, the authors develop a model describing antecedents to the strength of the link between research and practice.

  20. Parallel optics technology assessment for the versatile link project

    SciTech Connect (OSTI)

    Chramowicz, J.; Kwan, S.; Rivera, R.; Prosser, A.; /Fermilab

    2011-01-01

    This poster describes the assessment of commercially available and prototype parallel optics modules for possible use as back end components for the Versatile Link common project. The assessment covers SNAP12 transmitter and receiver modules as well as optical engine technologies in dense packaging options. Tests were performed using vendor evaluation boards (SNAP12) as well as custom evaluation boards (optical engines). The measurements obtained were used to compare the performance of these components with single channel SFP+ components operating at a transmission wavelength of 850 nm over multimode fibers.

  1. Duality linking standard and tachyon scalar field cosmologies

    SciTech Connect (OSTI)

    Avelino, P. P.; Bazeia, D.; Losano, L.; Oliveira, J. C. R. E.; Pavan, A. B.

    2010-09-15

    In this work we investigate the duality linking standard and tachyon scalar field homogeneous and isotropic cosmologies in N+1 dimensions. We determine the transformation between standard and tachyon scalar fields and between their associated potentials, corresponding to the same background evolution. We show that, in general, the duality is broken at a perturbative level, when deviations from a homogeneous and isotropic background are taken into account. However, we find that for slow-rolling fields the duality is still preserved at a linear level. We illustrate our results with specific examples of cosmological relevance, where the correspondence between scalar and tachyon scalar field models can be calculated explicitly.

  2. MARKAL-MACRO: A linked model for energy-economy analysis

    SciTech Connect (OSTI)

    Manne, A.S.; Wene, C.O.

    1992-02-01

    MARKAL-MACRO is an experiment in model linkage for energy and economy analysis. This new tool is intended as an improvement over existing methods for energy strategy assessment. It is designed specifically for estimating the costs and analyzing the technologies proposed for reducing environmental risks such as global climate change or regional air pollution. The greenhouse gas debate illustrates the usefulness of linked energy-economy models. A central issue is the coupling between economic growth, the level of energy demands, and the development of an energy system to supply these demands. The debate is often connected with alternative modeling approaches. The competing philosophies may be labeled ``top-down macroeconomic`` and ``bottom-up engineering`` perspectives. MARKAL is a systems engineering (physical process) analysis built on the concept of a Reference Energy System (RES). MARKAL is solved by means of dynamic linear programming. In most applications, the end use demands are fixed, and an economically efficient solution is obtained by minimizing the present value of energy system`s costs throughout the planning horizon. MACRO is a macroeconomic model with an aggregated view of long-term economic growth. The basis input factors of production are capital, labor and individual forms of energy. MACRO is solved by nonlinear optimization.

  3. Staff | Energy Systems Integration | NREL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Staff NREL's Energy Systems Integration directorate includes the Power Systems Engineering Center, Computational Science Center, Cyber-Physical Systems Security and Resilience Center, and Energy Systems Integration Facility operations staff. Photo of Bryan Hannegan Bryan Hannegan Associate Lab Director, Energy Systems Integration Dr. Bryan Hannegan leads the lab's global initiative to optimize links among electricity, fuel, thermal, water, and communication networks to enable a more sustainable

  4. Stressing of turbine-generator-exciter shafts by variable-frequency currents superimposed on DC currents in asynchronous HVDC links and following disturbances at converter stations

    SciTech Connect (OSTI)

    Hammons, T.J.; Bremner, J.J. )

    1994-09-01

    Ripple currents on the DC side of both HVDC synchronous and asynchronous. Links together with cleared HVDC and AC system disturbances can excite in some circumstances onerous torsional vibrations in large steam generator shafts. The problem has assumed importance in recent months on account of the HVDC Link between Scotland and Northern Ireland going ahead, on account of the proposed Eire/Wales Link, and because AC/DC/AC couplers are to be installed extensively to interconnect the East and West European Grid Systems. This paper discusses and analyses excitation of shaft torsional vibrations in steam turbine-generator-exciter shafts in close proximity to HVDC converter stations by (1) variable-frequency ripple currents superimposed on the DC currents in asynchronous Links, and (2) disturbances at bi-polar converter stations. The time response and tables show that for the systems studied variable-frequency ripple currents superimposed on the DC current in asynchronous Links can excite shaft torsional vibrations, the very small noncharacteristic currents could result in onerous shaft torques which might damage the machine, and that DC line faults at converter stations in close proximity of steam turbine-generator units can excite onerous turbine-generator shaft torsional response. Detailed simulation of the HVDC converter and generator is necessary for precise assessments of shaft torsional response following HVDC converter station faults. 500MW, 660MW, 1000MW and 1300MW machines are considered in the analyses that are made.

  5. DOE Wind Energy R&D is Linked to Innovations Within and Outside...

    Energy Savers

    Wind Energy R&D is Linked to Innovations Within and Outside Wind Power Industry, Study Finds DOE Wind Energy R&D is Linked to Innovations Within and Outside Wind Power Industry, ...

  6. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Home > Linked Open Data Workshop in Washington, D.C. > Posts by term Content Group Activity By term Q & A Feeds Event (2) linked open data (2) LOD (2) notes (1) Open Data (2)...

  7. Linking the micro and macro: L-H transition dynamics and threshold...

    Office of Scientific and Technical Information (OSTI)

    Linking the micro and macro: L-H transition dynamics and threshold physics Citation Details In-Document Search Title: Linking the micro and macro: L-H transition dynamics and ...

  8. Link to the Utilities by Zip Code File | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Link to the Utilities by Zip Code File Home > Groups > Utility Rate I am trying to access the link to the utility by zip code csv file from the following side bar on the utility...

  9. Find Us Links | OSTI, US Dept of Energy, Office of Scientific...

    Office of Scientific and Technical Information (OSTI)

    Find Us Links OSTI Facebook OSTI Twitter OSTI Google+ (Link will open in a new window) Subscribe to the Newsletter Issue issue-3-january-february-2013 Go to full ...

  10. Cross-linked comb-shaped anion exchange membranes with high base stability

    SciTech Connect (OSTI)

    Li, NW; Wang, LZ; Hickner, M

    2014-01-01

    A unique one-step cross-linking strategy that connects quaternary ammonium centers using Grubbs II-catalyzed olefin metathesis was developed. The cross-linked anion exchange membranes showed swelling ratios of less than 10% and hydroxide conductivities of 18 to 40 mS cm(- 1). Cross-linking improved the membranes' stability to hydroxide degradation compared to their non-cross-linked analogues.

  11. Energy Conservation for Ohioans (ECO-Link) Program

    Energy.gov [DOE]

    Qualifying Technology A wide range of energy-efficiency upgrades and certain renewable-energy systems may be undertaken, including:

  12. MARKAL-MACRO: A linked model for energy-economy analysis

    SciTech Connect (OSTI)

    Manne, A.S. ); Wene, C.O. Chalmers Univ. of Tech., Goeteborg )

    1992-02-01

    MARKAL-MACRO is an experiment in model linkage for energy and economy analysis. This new tool is intended as an improvement over existing methods for energy strategy assessment. It is designed specifically for estimating the costs and analyzing the technologies proposed for reducing environmental risks such as global climate change or regional air pollution. The greenhouse gas debate illustrates the usefulness of linked energy-economy models. A central issue is the coupling between economic growth, the level of energy demands, and the development of an energy system to supply these demands. The debate is often connected with alternative modeling approaches. The competing philosophies may be labeled top-down macroeconomic'' and bottom-up engineering'' perspectives. MARKAL is a systems engineering (physical process) analysis built on the concept of a Reference Energy System (RES). MARKAL is solved by means of dynamic linear programming. In most applications, the end use demands are fixed, and an economically efficient solution is obtained by minimizing the present value of energy system's costs throughout the planning horizon. MACRO is a macroeconomic model with an aggregated view of long-term economic growth. The basis input factors of production are capital, labor and individual forms of energy. MACRO is solved by nonlinear optimization.

  13. Coding Links on Websites Outside of the Energy.gov Drupal Environment

    Energy.gov [DOE]

    If you're coding links for a website outside of the Energy.gov environment, follow these guidelines. This includes explanations of how to code links, how to add the "external website" pop-up, how to create "back to top" links, and how to code skipped navigation.

  14. Query optimization for graph analytics on linked data using SPARQL

    SciTech Connect (OSTI)

    Hong, Seokyong; Lee, Sangkeun; Lim, Seung -Hwan; Sukumar, Sreenivas R.; Vatsavai, Ranga Raju

    2015-07-01

    Triplestores that support query languages such as SPARQL are emerging as the preferred and scalable solution to represent data and meta-data as massive heterogeneous graphs using Semantic Web standards. With increasing adoption, the desire to conduct graph-theoretic mining and exploratory analysis has also increased. Addressing that desire, this paper presents a solution that is the marriage of Graph Theory and the Semantic Web. We present software that can analyze Linked Data using graph operations such as counting triangles, finding eccentricity, testing connectedness, and computing PageRank directly on triple stores via the SPARQL interface. We describe the process of optimizing performance of the SPARQL-based implementation of such popular graph algorithms by reducing the space-overhead, simplifying iterative complexity and removing redundant computations by understanding query plans. Our optimized approach shows significant performance gains on triplestores hosted on stand-alone workstations as well as hardware-optimized scalable supercomputers such as the Cray XMT.

  15. Linking strain anisotropy and plasticity in copper metallization

    SciTech Connect (OSTI)

    Murray, Conal E. Jordan-Sweet, Jean; Priyadarshini, Deepika; Nguyen, Son

    2015-05-04

    The elastic anisotropy of copper leads to significant variation in the x-ray elastic constants (XEC), which link diffraction-based strain measurements to stress. An accurate depiction of the mechanical response in copper thin films requires a determination of an appropriate grain interaction model that lies between Voigt and Reuss limits. It is shown that the associated XEC weighting fraction, x*, between these limits provides a metric by which strain anisotropy can be quantified. Experimental values of x*, as determined by a linear regression scheme of diffraction data collected from multiple reflections, reveal the degree of strain anisotropy and its dependence on plastic deformation induced during in-situ and ex-situ thermal treatments.

  16. Linked supramolecular building blocks for enhanced cluster formation

    DOE PAGES-Beta [OSTI]

    McLellan, Ross; Palacios, Maria A.; Beavers, Christine M.; Teat, Simon J.; Piligkos, Stergios; Brechin, Euan K.; Dalgarno, Scott J.

    2015-01-09

    Methylene-bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the complex assembly process. The ability to covalently link calix[4]arenes at the methylene bridge provides significantly improved control over the introduction of different metal centres to resulting cluster motifs. Clusters assembled from bis-calix[4]arenes and transition metal ions or 3d-4f combinations display characteristic features of the analogous calix[4]arene supported clusters, thereby demonstrating an enhanced and rational approach towards the targeted synthesis of complex and challenging structures.

  17. Linked supramolecular building blocks for enhanced cluster formation

    SciTech Connect (OSTI)

    McLellan, Ross; Palacios, Maria A.; Beavers, Christine M.; Teat, Simon J.; Piligkos, Stergios; Brechin, Euan K.; Dalgarno, Scott J.

    2015-01-09

    Methylene-bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the complex assembly process. The ability to covalently link calix[4]arenes at the methylene bridge provides significantly improved control over the introduction of different metal centres to resulting cluster motifs. Clusters assembled from bis-calix[4]arenes and transition metal ions or 3d-4f combinations display characteristic features of the analogous calix[4]arene supported clusters, thereby demonstrating an enhanced and rational approach towards the targeted synthesis of complex and challenging structures.

  18. X-linked inheritance in neuronal migration disorders (NMD)

    SciTech Connect (OSTI)

    Andermann, E.; Dubeau, F.; Tampieri, D.

    1994-09-01

    With the advent of MRI imaging, an increasing number of NMD have been identified in patients with epilepsy. Although most cases have been sporadic, families with these disorders have now been reported in several types of NMD. Furthermore, subcortical bank heterotopia (SBH) or {open_quotes}double cortex syndrome{close_quotes} and periventricular nodular heterotopia (PNH) have a marked female predominance. Two females with SBH, mild mental retardation and seizures had sons with lissencephaly, severe retardation and seizures, and daughters with SBH. X-linked lissencephaly has been observed in several other families, and one girl with lissencephaly was found to have a de novo X-autosomal translocation with a breakpoint in chromosome Xq22. We have studied three families with two or more generations affected by PNH in females, a high frequency of spontaneous abortions and abnormal sex ratios in sibships. The clinical manifestations include seizures and normal intelligence. Three other families with PNH in females have been reported in the literature. Bilateral perisylvian polymicrogyria has been reported in monozygotic twins and in siblings, and we have studied a brother and sister with an affected maternal uncle. These findings suggest sex-linked dominant inheritance with male lethality or severe expression in males. The three disorders described above may represent different mutations of a single gene or mutations in two or more genes on the X-chromosome. At least one gene is probably located in chromosome band Xq22. Genetic linkage studies in families with NMD as well as a search for candidate genes such as adhesion molecules known to map on the X-chromosome should lead to the identification of the gene(s) responsible for these disorders.

  19. Complex Systems of Systems | NISAC

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Systems of

  20. Final New England Clean Power Link Project Environmental Impact...

    Energy.gov (indexed) [DOE]

    ... (MW), high- voltage direct current (HVDC) electric power transmission system that ... (DC)-to-alternating current (AC) HVDC converter station in the town of Ludlow, Vermont. ...

  1. EnLink Geoenergy Services Inc | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    was formed in 1995 to manage installation of earth heat exchangers for geothermal heat pump systems for commercialinstitutional buildings. Coordinates: 29.76045, -95.369784...

  2. Quick Links to Featured Reports | Department of Energy

    Energy Savers

    The Office of Electricity Delivery and Energy Reliability ... a resilient, reliable, and flexible electricity system. ... Energy Storage Safety Strategic Plan Smart Grid Investments ...

  3. Linking atomistic and mesoscale simulations of nanocrystalline materials : quantitative validation for the case of grain growth.

    SciTech Connect (OSTI)

    Moldovan, D.; Wolf, D.; Phillpot, S. R.; Materials Science Division; Louisiana State Univ.

    2003-11-01

    Using grain growth in nanocrystalline palladium as a simple case study, we demonstrate how a novel mesoscale approach for simulating microstructural evolution in polycrystalline materials can be validated directly against atomic-level simulations of the same system. We first describe molecular dynamics simulations of grain growth in a columnar model microstructure. The atomic-level insights into the grain-growth mechanism gained from these simulations, particularly in the role of grain rotations, are captured theoretically for incorporation into the mesoscale approach, in which the objects evolving in space and time are the grain boundaries and grain junctions rather than the atoms. With all the input parameters to the mesoscale being physically well defined and obtained directly from the atomic-level simulations, the mesoscale simulations are fully prescribed. We find that the morphology of the mesoscale system evolves in an almost identical manner with that of the molecular dynamics simulation, demonstrating that the length- and time-scale linking has been performed correctly. When applied to systems containing large numbers of grains, the now validated mesoscale simulation approach allows the growth topology and long-time growth kinetics to be determined. As an outlook, we describe how the effects of applied stress can be incorporated.

  4. Energy harvesting from vibration with cross-linked polypropylene piezoelectrets

    SciTech Connect (OSTI)

    Zhang, Xiaoqing; Wu, Liming; Sessler, Gerhard M.

    2015-07-15

    Piezoelectret films are prepared by modification of the microstructure of polypropylene foam sheets cross-linked by electronic irradiation (IXPP), followed by proper corona charging. Young’s modulus, relative permittivity, and electromechanical coupling coefficient of the fabricated films, determined by dielectric resonance spectra, are about 0.7 MPa, 1.6, and 0.08, respectively. Dynamic piezoelectric d{sub 33} coefficients up to 650 pC/N at 200 Hz are achieved. The figure of merit (FOM, d{sub 33} ⋅ g{sub 33}) for a more typical d{sub 33} value of 400 pC/N is about 11.2 GPa{sup −1}. Vibration-based energy harvesting with one-layer and two-layer stacks of these films is investigated at various frequencies and load resistances. At an optimum load resistance of 9 MΩ and a resonance frequency of 800 Hz, a maximum output power of 120 μW, referred to the acceleration g due to gravity, is obtained for an energy harvester consisting of a one-layer IXPP film with an area of 3.14 cm{sup 2} and a seismic mass of 33.7 g. The output power can be further improved by using two-layer stacks of IXPP films in electric series. IXPP energy harvesters could be used to energize low-power electronic devices, such as wireless sensors and LED lights.

  5. Heterogeneity analysis in 40 X-linked retinitis pigmentosa families

    SciTech Connect (OSTI)

    Teague, P.W.; Aldred, M.A.; Dempster, M.; Harrison, C.; Carothers, A.D.; Hardwick, L.J.; Evans, H.J.; Wright, A.F.; Strain, L.; Brock, D.J.H. )

    1994-07-01

    Analysis of genetic heterogeneity in 40 kindreds with X-linked retinitis pigmentosa (XLRP), with 20 polymorphic markers, showed that significant heterogeneity is present (P=.001) and that 56% of kindreds are of RP3 type and that 26% are of RP2 type. The location of the RP3 locus was found to be 0.4 cM distal to OTC in the Xp21.1 region, and that of the RP2 locus was 6.5 cM proximal to DXS7 in Xp11.2-p11.3. Bayesian probabilities of linkage to RP2, RP3, or to neither locus were calculated. This showed that 20 of 40 kindreds could be assigned to one or the other locus, with a probability >.70 (14 kindreds with RP3 and 6 kindreds with RP2 disease). A further three kindreds were found to be unlinked to either locus, with a probability >.8. The remaining 17 kindreds could not be classified unambiguously. This highlights the difficulty of classifying families in the presence of genetic heterogeneity, where two loci are separated by an estimated 16 cM. 34 refs., 1 fig., 4 tabs.

  6. Cross-linking of polytetrafluoroethylene during room-temperature irradiation

    SciTech Connect (OSTI)

    Pugmire, David L; Wetteland, Chris J; Duncan, Wanda S; Lakis, Rollin E; Schwartz, Daniel S

    2008-01-01

    Exposure of polytetrafluoroethylene (PTFE) to {alpha}-radiation was investigated to detennine the physical and chemical effects, as well as to compare and contrast the damage mechanisms with other radiation types ({beta}, {gamma}, or thermal neutron). A number of techniques were used to investigate the chemical and physical changes in PTFE after exposure to {alpha}-radiation. These techniques include: Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and fluorescence spectroscopy. Similar to other radiation types at low doses, the primary damage mechanism for the exposure of PTFE to {alpha}-radiation appears to be chain scission. Increased doses result in a change-over of the damage mechanism to cross-linking. This result is not observed for any radiation type other than {alpha} when irradiation is performed at room temperature. Finally, at high doses, PTFE undergoes mass-loss (via smallfluorocarbon species evolution) and defluorination. The amount and type of damage versus sample depth was also investigated. Other types of radiation yield damage at depths on the order of mm to cm into PTFE due to low linear energy transfer (LET) and the correspondingly large penetration depths. By contrast, the {alpha}-radiation employed in this study was shown to only induce damage to a depth of approximately 26 {mu}m, except at very high doses.

  7. Property:NrelPartnerDescLink | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    pages using this property. (previous 25) (next 25) 3 3M + http:www.nrel.govpvpvmanufacturing.html + A A123Systems + http:www.nrel.govnewspress2008610.html + AVL...

  8. Microsoft Word - GNEP Website Glossary 2006-02-03_no_links.doc | Department

    Office of Environmental Management (EM)

    of Energy GNEP Website Glossary 2006-02-03_no_links.doc Microsoft Word - GNEP Website Glossary 2006-02-03_no_links.doc Microsoft Word - GNEP Website Glossary 2006-02-03_no_links.doc (29.63 KB) More Documents & Publications GNEP Glossary Generation-IV Roadmap Report of the Fuel Cycle Crosscut Group DOE-HDBK-1113-2008

  9. Website Policies and Important Links | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information Website Policies and Important Links This page provides a comprehensive overview of the policies of this federally sponsored website, consistent with guidance established by the U.S. Office of Management and Budget (OMB) as implemented by the U.S. Department of Energy. Disclaimer Acceptable Use Policy User Privacy Copyright Attribution Accessibility/Section 508 Website Security Linking to OSTI Website Linking to Outside Websites Freedom of Information

  10. Molybdate sorption by cross-linked chitosan beads: Dynamic studies

    SciTech Connect (OSTI)

    Guibal, E.; Milot, C.; Roussy, J.

    1999-01-01

    Recent trends in environmental monitoring have induced increasing development of new wastewater treatment techniques. Membrane processes, electrochemical techniques, or ion-exchange systems are widely used, but biosorption has been recognized in the last 30 years as a promising way to reduce the contamination of surface water issued from industrial effluent. Chitosan, a biopolymer extracted from crustacean shells, exhibits high sorption capacities for metal ion recovery. Sorption efficiency and removal rates are controlled by several diffusion mechanisms. Chitosan gel beads have been prepared and have shown enhanced sorption performance in batch systems. This study shows that, in continuous systems, sorption capacities can reach 700 mg/g, a level close to that obtained in batch studies. The effects of metal concentration, flow velocity, and column size are investigated and demonstrate that, because of diffusion mechanisms, the optimum concentration range is approximately 50 to 100 mg/L. In column systems, the Biot number, though greater than 1, is lower than the Biot number obtained in batch systems, indicating that external mass transfer influences mass transfer at the low superficial velocity investigated in this work.

  11. L-Aspartate Links for Stable Sodium Metal-Organic Frameworks...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    L-Aspartate Links for Stable Sodium Metal-Organic Frameworks Previous Next List Siman, Peter; ... linker with flexible carboxylate groups to enhance framework stability. ...

  12. DOE Wind Energy R&D is Linked to Innovations Within and Outside Wind Power

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Industry, Study Finds | Department of Energy Wind Energy R&D is Linked to Innovations Within and Outside Wind Power Industry, Study Finds DOE Wind Energy R&D is Linked to Innovations Within and Outside Wind Power Industry, Study Finds DOE Wind Energy R&D is Linked to Innovations Within and Outside Wind Power Industry, Study Finds, an EERE Retrospective Study Brief, September 2009. Advances in today's commercial wind energy generation are extensively linked to the Department of

  13. High Conductivity Single-ion Cross-linked Polymers for Lithium...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    High Conductivity Single-ion Cross-linked Polymers for Lithium Batteries and Fuel Cells ... for use as membranes in lithium batteries, fuel cells, and electrochromic windows. ...

  14. Non-Cross-Linked Gel Polymer Electrolytes for Lithium Ion Batteries...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Non-Cross-Linked Gel Polymer Electrolytes for Lithium Ion Batteries Lawrence Berkeley ... have invented nanostructured gel polymer electrolytes for lithium ion batteries. ...

  15. Final Report: DOE Project: DE-SC-0005399 Linking the uncertainty...

    Office of Scientific and Technical Information (OSTI)

    Linking the uncertainty of low frequency variability in tropical forcing in regional climate change Citation Details In-Document Search Title: Final Report: DOE Project:...

  16. Torus Network on a BG/Q System | Argonne Leadership Computing...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Blue GeneQ Versus Blue GeneP BGQ Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data...

  17. Integration of small taps into (existing) HVDC links

    SciTech Connect (OSTI)

    Bahrman, M.; Baker, M.; Bowles, J.

    1995-07-01

    Tapping of HVDC lines to serve intermediate loads or to pick up dispersed generation has always presented formidable technical and economic challenges to transmission planners and to system designers. These challenges have been particularly daunting when the power rating of the tap is small compared to that of the main terminals. This document provides transmission planners with various factors which need to be considered in evaluating the feasibility of tapping existing HVDC transmission lines or in developing alternatives for potential new transmission schemes.

  18. The cce/8.3.0 C++ compiler may run into a linking error on Edison

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The cce8.3.0 C++ compiler may run into a linking error on Edison The cce8.3.0 C++ compiler may run into a linking error on Edison July 1, 2014 You may run into the following...

  19. Duke University Writes About Physics Link Between JLab Father-Daughter

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    (Duke Physics News) | Jefferson Lab Duke University Writes About Physics Link Between JLab Father-Daughter (Duke Physics News) External Link: http://news.phy.duke.edu/2012/08/duke-physics-is-a-family-tradition-for-chip-and... By jlab_admin on Mon, 2012-08-0

  20. Applications of Laminar Weak-Link Mechanisms for Ultraprecision Synchrotron Radiation Instruments

    SciTech Connect (OSTI)

    Shu, D.; Toellner, T. S.; Alp, E. E.; Maser, J.; Ilavsky, J.; Shastri, S. D.; Lee, P. L.; Narayanan, S.; Long, G. G. [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States)

    2007-01-19

    Unlike traditional kinematic flexure mechanisms, laminar overconstrained weak-link mechanisms provide much higher structure stiffness and stability. Using a laminar structure configured and manufactured by chemical etching and lithography techniques, we are able to design and build linear and rotary weak-link mechanisms with ultrahigh positioning sensitivity and stability for synchrotron radiation applications. Applications of laminar rotary weak-link mechanism include: high-energy-resolution monochromators for inelastic x-ray scattering and x-ray analyzers for ultra-small-angle scattering and powder-diffraction experiments. Applications of laminar linear weak-link mechanism include high-stiffness piezo-driven stages with subnanometer resolution for an x-ray microscope. In this paper, we summarize the recent designs and applications of the laminar weak-link mechanisms at the Advanced Photon Source.

  1. CX-010404: Categorical Exclusion Determination

    Energy.gov [DOE]

    Replace Brine Disposal System Header to West Hackberry Brine Tanks, Government Furnished Equipment CX(s) Applied: B1.3 Date: 04/22/2013 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office

  2. CX-010401: Categorical Exclusion Determination

    Energy.gov [DOE]

    Replace Brine Disposal System Header to West Hackberry Brine Tanks CX(s) Applied: B1.3 Date: 04/22/2013 Location(s): Louisiana Offices(s): Strategic Petroleum Reserve Field Office

  3. CX-009718: Categorical Exclusion Determination

    Energy.gov [DOE]

    Replace Brine Disposal System Header to Bryan Mound Brine Tank, GFE CX(s) Applied: B1.3 Date: 12/11/2012 Location(s): Texas Offices(s): Strategic Petroleum Reserve Field Office

  4. Investigating methods of supporting dynamically linked executables on high performance computing platforms.

    SciTech Connect (OSTI)

    Kelly, Suzanne Marie; Laros, James H., III; Pedretti, Kevin Thomas Tauke; Levenhagen, Michael J.

    2009-09-01

    Shared libraries have become ubiquitous and are used to achieve great resource efficiencies on many platforms. The same properties that enable efficiencies on time-shared computers and convenience on small clusters prove to be great obstacles to scalability on large clusters and High Performance Computing platforms. In addition, Light Weight operating systems such as Catamount have historically not supported the use of shared libraries specifically because they hinder scalability. In this report we will outline the methods of supporting shared libraries on High Performance Computing platforms using Light Weight kernels that we investigated. The considerations necessary to evaluate utility in this area are many and sometimes conflicting. While our initial path forward has been determined based on this evaluation we consider this effort ongoing and remain prepared to re-evaluate any technology that might provide a scalable solution. This report is an evaluation of a range of possible methods of supporting dynamically linked executables on capability class1 High Performance Computing platforms. Efforts are ongoing and extensive testing at scale is necessary to evaluate performance. While performance is a critical driving factor, supporting whatever method is used in a production environment is an equally important and challenging task.

  5. Control and Auxiliary Systems - MST - UW Plasma Physics

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Control and Auxiliary Systems UW Madison Madison Symmetric Torus Control and Auxiliary Systems MST HomeGraduate Student InformationLinksTourControl and Auxiliary SystemsPhysics TopicsDeviceResearch MissionMST People mst logo CPLA Home Directory Publications Links Internal University of Wisconsin Physics Department Research funding includes support from: Department of Energy National Science Foundation Control of the current density profile in MST has led to reduced magnetic fluctuations and

  6. Quantitative and qualitative measures of decomposition: Is there a link?

    SciTech Connect (OSTI)

    Eaton, Robert, J.; Sanchez, Felipe, G.

    2009-03-01

    Decomposition rates of loblolly pine coarse woody debris (CWD) were determined by mass loss and wood density changes for trees that differed in source of mortality (natural, girdle-poison, and felling). Specifically, three treatments were examined: (1) control (CON): natural mortality; (2) CD: 5-fold increase in CWD compared with the CON; and (3) CS: 12-fold increase in snags compared with the CON. The additional CWD in the CD treatment plots and the additional snags in the CS plots were achieved by felling (for the CD plots) or girdling followed by herbicide injection (for the CS plots) select trees in these plots. Consequently,mortality on the CD plots is due to natural causes and felling. Likewise, mortality on the CS plots is due to natural causes and girdle-poison. In each treatment plot, mortality due to natural causes was inventoried since 1997, whereas mortality due to girdle-poison and felling were inventoried since 2001. No significant difference was detected between the rates of decomposition for the CWD on these treatment plots, indicating that source of the tree mortality did not influence rates of decomposition once the tree fell. These experimental measures of decomposition were compared with two decay classification systems (three- and five-unit classifications) to determine linkages. Changes in wood density did not correlate to any decay classification, whereas mass loss had a weak correlation with decay class. However, the large degree of variation limits the utility of decay classification systems in estimating mass loss.

  7. Views of the solar system

    SciTech Connect (OSTI)

    Hamilton, C.

    1995-02-01

    Views of the Solar System has been created as an educational tour of the solar system. It contains images and information about the Sun, planets, moons, asteroids and comets found within the solar system. The image processing for many of the images was done by the author. This tour uses hypertext to allow space travel by simply clicking on a desired planet. This causes information and images about the planet to appear on screen. While on a planet page, hyperlinks travel to pages about the moons and other relevant available resources. Unusual terms are linked to and defined in the Glossary page. Statistical information of the planets and satellites can be browsed through lists sorted by name, radius and distance. History of Space Exploration contains information about rocket history, early astronauts, space missions, spacecraft and detailed chronology tables of space exploration. The Table of Contents page has links to all of the various pages within Views Of the Solar System.

  8. Design/installation and structural integrity assessment of Bethel Valley low-level waste collection and transfer system upgrade for Building 3092 (Central Off-Gas Scrubber Facility) at Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    1995-01-01

    This document describes and assesses planned modifications to be made to the Building 3092 Central Off-Gas Scrubber Facility of the Oak Ridge National Laboratory, Oak Ridge, Tennessee. The modifications are made in responsible to the requirements of 40CFR264 Subpart J, relating to environmental protection requirements for buried tank systems. The modifications include the provision of a new scrubber recirculation tank in a new, below ground, lines concrete vault, replacing and existing recirculation sump that does not provide double containment. A new buried, double contained pipeline is provided to permit discharge of spent scrubber recirculation fluid to the Central Waste Collection Header. The new vault, tank, and discharge line are provided with leak detection and provisions to remove accumulated liquid. New scrubber recirculation pumps, piping, and accessories are also provided. This assessment concludes that the planned modifications comply with applicable requirements of 40CFR264 Subpart J, as set forth in Appendix F to the Federal Facility Agreement, Docket No. 89-04-FF, covering the Oak Ridge Reservation.

  9. SISGR: Linking Ion Solvation and Lithium Battery Electrolyte Properties

    SciTech Connect (OSTI)

    Trulove, Paul C.; Foley, Matthew P.

    2012-09-30

    The solvation and phase behavior of the model battery electrolyte salt lithium trifluoromethanesulfonate (LiCF3SO3) in commonly used organic solvents; ethylene carbonate (EC), gamma-butyrolactone (GBL), and propylene carbonate (PC) was explored. Data from differential scanning calorimetry (DSC), Raman spectroscopy, and X-ray diffraction were correlated to provide insight into the solvation states present within a sample mixture. Data from DSC analyses allowed the construction of phase diagrams for each solvent system. Raman spectroscopy enabled the determination of specific solvation states present within a solvent-salt mixture, and X-ray diffraction data provided exact information concerning the structure of a solvates that could be isolated Thermal analysis of the various solvent-salt mixtures revealed the phase behavior of the model electrolytes was strongly dependent on solvent symmetry. The point groups of the solvents were (in order from high to low symmetry): C2V for EC, CS for GBL, and C1 for PC(R). The low symmetry solvents exhibited a crystallinity gap that increased as solvent symmetry decreased; no gap was observed for EC-LiTf, while a crystallinity gap was observed spanning 0.15 to 0.3 mole fraction for GBL-LiTf, and 0.1 to 0.33 mole fraction for PC(R)-LiTf mixtures. Raman analysis demonstrated the dominance of aggregated species in almost all solvent compositions. The AGG and CIP solvates represent the majority of the species in solutions for the more concentrated mixtures, and only in very dilute compositions does the SSIP solvate exist in significant amounts. Thus, the poor charge transport characteristics of CIP and AGG account for the low conductivity and transport properties of LiTf and explain why is a poor choice as a source of Li+ ions in a Li-ion battery.

  10. Oil to soil fluorescence-a vital link

    SciTech Connect (OSTI)

    Calhoun, G.G. )

    1994-03-01

    The aromatic component in oils may prove to be the key to defining oil traps in mature basins as well as pioneer areas. This is a direct indication of vertical oil migration and can precisely duplicate the oil signature in soil samples. This study traces the changes that occur in San Andres oils over the Permian basin. The sequence of sync-scans along the Central Basin platform pictures the gradual changes in the mix of lighter aromatics in the north toward predominately heavier aromatics in the south. This change parallels decreasing depth, freshening of formations waters, and decreased gravity of the oil. A comparison of oils and their source rocks is presented for the Woodford, Pennsylvanian, and Wolfcamp generation-migration systems. The sieving effect of the source shales is evident in the higher concentrations of complex molecules retained in the source rock as compared to the resultant oils trapped in conventional reservoir rocks. Movable oil retained in the source rock is also evident using synchronous scans. Productive areas are reflected at the surface with oil to soil correlation coefficients up to 90%. Barren areas are often evident in soil samples by their close resemblance to the source rock signature. The contrast between productive and barren area is also evident in a 100+% increase in the concentration of the various families of compounds-Benzenes, Naphthalenes, Phenanthrenes-Anthracene, and compounds containing five or more aromatic rings. Any surface geochemical evaluation should include no less than three techniques, and one of these should be soil fluorescence. No other geochemical technique can identify the source of microseeping oil. Only fluorescence cannot only say [open quotes]yes[close quotes] or [open quotes]no,[close quotes] but can also name the objective horizon.

  11. NATIONAL GEOTHERMAL DATA SYSTEM: AN EXEMPLAR OF OPEN ACCESS TO DATA

    SciTech Connect (OSTI)

    Blackman, Harold; Blackman, Harold M.; Blackman, Harold M.; Blackman, Harold; Blackman, Harold; Blackman, Harold

    2013-10-01

    The formal launch of National Geothermal Data System (NGDS – www.geothermaldata.org) in 2014 will provide open access to technical geothermal-relevant data from all of the Department of Energy- sponsored geothermal development and research projects and geologic data from all 50 states. By making data easily discoverable and accessible this system will open new exploration opportunities and shorten project development. The prototype data system currently includes multiple data nodes, and nationwide data online and available to the public, indexed through a single catalog under construction at http://search.geothermaldata.org. Data from state geological surveys and partners includes more than 5 million records online, including 1.48 million well headers (oil and gas, water, geothermal), 732,000 well logs, and 314,000 borehole temperatures and is growing rapidly. There are over 250 Web services and another 138 WMS (Web Map Services) registered in the system as of August, 2013. Additional data record is being added by companion projects run by Boise State University, Southern Methodist University, and the USGS. The National Renewable Energy Laboratory is managing the Geothermal Data Repository, an NGDS node that will be a clearinghouse for data from hundreds of DOE-funded geothermal projects. NGDS is built on the US Geoscience Information Network (USGIN) data integration framework, which is a joint undertaking of the USGS and the Association of American State Geologists (AASG). NGDS is fully compliant with the White House Executive Order of May 2013, requiring all federal agencies to make their data holdings publicly accessible online in open source, interoperable formats with common core and extensible metadata. The National Geothermal Data System is being designed, built, deployed, and populated primarily with grants from the US Department of Energy, Geothermal Technologies Office. To keep this operational system sustainable after the original implementation will

  12. OPM'S ONLINE COURSE: "LINKING AND DEVELOPING MEASURABLE SES RESULTS-FOCUSED PERFORMANCE REQUIREMENTS

    Energy.gov [DOE]

    OPM is pleased to share an online course developed for senior executives entitled, “Linking and Developing Measurable SES Results-Focused Performance Requirements http://www.hru.gov/course_catalog...

  13. OPM's Online Course: "Linking and Developing Measurable SES Results-Focused Performance Requirements

    Energy.gov [DOE]

    OPM is pleased to share an online course developed for senior executives entitled, “Linking and Developing Measurable SES Results-Focused Performance Requirements http://www.hru.gov/course_catalog...

  14. Geek-Up[10.22.2010]: Exploring the CAVE, Electrical Links to...

    Energy.gov (indexed) [DOE]

    Scientists at the lab's Molecular Foundry have designed an electrical link to living cells, which could allow cells to read and respond to electrical signals. Jay Groves, a faculty ...

  15. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOE Patents [OSTI]

    Kostic, Nenad M.; Chen, Jian

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme.

  16. Cross-Linked Conjugated Polymer Fibrils: Robust Nanowires from Functional Polythiophene Diblock Copolymers

    SciTech Connect (OSTI)

    Hammer, Brenton A. G.; Bokel, Felicia A.; Hayward, Ryan C.; Emrick, Todd

    2011-09-27

    A series of poly(3-hexyl thiophene) (P3HT)-based diblock copolymers were prepared and examined in solution for their assembly into fibrils, and post-assembly cross-linking into robust nanowire structures. P3HT-b-poly(3-methanol thiophene) (P3MT), and P3HT-b-poly(3-aminopropyloxymethyl thiophene) (P3AmT) diblock copolymers were synthesized using Grignard metathesis (GRIM) polymerization. Fibrils formed from solution assembly of these copolymers are thus decorated with hydroxyl and amine functionality, and cross-linking is achieved by reaction of diisocyanates with the hydroxyl and amine groups. A variety of cross-linked structures, characterized by transmission electron microscopy (TEM), were produced by this method, including dense fibrillar sheets, fibril bundles, or predominately individual fibrils, depending on the chosen reaction conditions. In solution, the cross-linked fibrils maintained their characteristic vibronic structure in solvents that would normally disrupt (dissolve) the structures.

  17. Effect of cross-link density on carbon dioxide separation in polydimethylsiloxane-norbornene membranes

    DOE PAGES-Beta [OSTI]

    Hong, Tao; Niu, Zhenbin; Hu, Xunxiang; Gmernicki, Kevin; Cheng, Shiwang; Fan, Fei; Johnson, J. Casey; Hong, Eunice; Mahurin, Shannon; Jiang, De -en; et al

    2015-01-01

    The development of high performance materials for CO2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO2 permeability ~ 6800 Barrer and CO2/N2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, which provides lightly cross-linked membranes.more » By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.« less

  18. Effect of cross-link density on carbon dioxide separation in polydimtheylsiloxane-norbornene membranes

    DOE PAGES-Beta [OSTI]

    Hong, Tao; Niu, Zhenbin; Hu, Xunxiang; Gmernicki, Kevin R.; Cheng, Shiwang; Fan, Fei; Johnson, Joseph C.; Hong, Eunice K.; Mahurin, Shannon Mark; Jiang, De-en; et al

    2015-01-01

    Here, the development of high-performance materials for carbon dioxide separation and capture will significantly contribute to a solution for climate change. Herein, (bicycloheptenyl)ethylterminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO2 permeability ≈ 6800 Barrer; CO2/N2 selectivity ≈ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in situ cross-linking method for difunctional PDMS macromonomers, which provides lightly cross-linked membranes. By combining positron annihilationmore » lifetime spectroscopy, broadband dielectric spectroscopy, and gas solubility measurements, key parameters necessary for achieving excellent performance have been elucidated.« less

  19. Effect of cross-link density on carbon dioxide separation in polydimethylsiloxane-norbornene membranes

    SciTech Connect (OSTI)

    Hong, Tao; Niu, Zhenbin; Hu, Xunxiang; Gmernicki, Kevin; Cheng, Shiwang; Fan, Fei; Johnson, J. Casey; Hong, Eunice; Mahurin, Shannon; Jiang, De -en; Long, Brian; Mays, Jimmy; Sokolov, Alexei; Saito, Tomonori

    2015-11-02

    The development of high performance materials for CO2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO2 permeability ~ 6800 Barrer and CO2/N2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, which provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.

  20. A Linked Fusion of Things, Services, and Data to Support a Collaborative Data Management Facility

    SciTech Connect (OSTI)

    Stephan, Eric G.; Elsethagen, Todd O.; Wynne, Adam S.; Sivaraman, Chitra; Macduff, Matt C.; Berg, Larry K.; Shaw, William J.

    2013-09-30

    The purpose of this paper is to illustrate the use of semantic technologies and approaches to seamlessly link things, services, and data in the proposed design of a scientific offshore wind energy research for the U.S. Department of Energy Wind and Water Technology Office of the Office of Energy Efficiency and Renewable Energy (EERE). By adapting linked community best practices, we were able to design a collaborative facility supporting both operational staff and end users that incorporates off-the-shelf components and overcome traditional barriers between devices, resulting data, and processing services. This was made largely possible through complementary advances in the Internet of Things (IoT), semantic web, Linked Services, and Linked Data communities, which provide the foundation for our design.

  1. The Office of Health, Safety and Security link to the VPPPA

    Energy.gov [DOE]

    Need to know which sites are current DOE-VPP or OSHA VPP Sites? The link, below, will take you to a Voluntary Protection Programs Participant's Association web page where you may search for current VPP sites by state.

  2. Effect of cross-link density on carbon dioxide separation in polydimethylsiloxane-norbornene membranes

    SciTech Connect (OSTI)

    Hong, Tao; Niu, Zhenbin; Hu, Xunxiang; Gmernicki, Kevin; Cheng, Shiwang; Fan, Fei; Johnson, J. Casey; Hong, Eunice; Mahurin, Shannon; Jiang, De -en; Long, Brian; Mays, Jimmy; Sokolov, Alexei; Saito, Tomonori

    2015-01-01

    The development of high performance materials for CO2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO2 permeability ~ 6800 Barrer and CO2/N2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, which provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.

  3. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Linked Open Data Workshop in Washington, D.C. Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll...

  4. Linked Open Data Workshop in Washington, D.C. - Q & A | OpenEI...

    Open Energy Information (Open El) [EERE & EIA]

    - Q & A Home > Linked Open Data Workshop in Washington, D.C. Content Group Activity By term Q & A Feeds No questions have been added to this group yet....

  5. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Groups > Groups > Linked Open Data Workshop in Washington, D.C. Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You...

  6. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOE Patents [OSTI]

    Kostic, N.M.; Chen, J.

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme. No Drawings

  7. Modification of Lignin by Protein Cross-linking to Facilitate Production of

    Office of Scientific and Technical Information (OSTI)

    Biofuels From Poplar (Technical Report) | SciTech Connect Modification of Lignin by Protein Cross-linking to Facilitate Production of Biofuels From Poplar Citation Details In-Document Search Title: Modification of Lignin by Protein Cross-linking to Facilitate Production of Biofuels From Poplar The limited supply of fossil fuels and the associated environmental issues associated with their utilization has resulted in much effort put forth to promote renewable resources of energy. Switching to

  8. Links - Center for Plasma in the Laboratory and Astrophysics - UW Madison

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Physics Department Links UW Madison Center for Plasma in the Laboratory and Astrophysics Links CPLA Home - Experiments Madison Symmetric Torus Madsion Dynamo Experiment Rotating Wall Machine Plasma-Couette Experiment Madison Plasma Dynamo Experiment - Theory Groups MHD Turbulence Transport in Fusion Devices Plasma Astrophysics RFP Theory - Multi-Institutional Centers Center for Magnetic Self Organization Center for Theory and Computation Center for Momentum Transport and Flow Organization

  9. LINKS NYC Showcases Promising Technologies from DOE's Labs to the Private

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sector and Investor Community | Department of Energy LINKS NYC Showcases Promising Technologies from DOE's Labs to the Private Sector and Investor Community LINKS NYC Showcases Promising Technologies from DOE's Labs to the Private Sector and Investor Community June 29, 2016 - 4:37pm Addthis Blog post by the Clean Energy Investment Center, June 29, 2016. The Department of Energy's (DOE)'s Clean Energy Investment Center (CEIC) held a second successful Laboratory-Investor Knowledge Series

  10. EERE Success Story-Ford-Dow Partnership Is Linked to Carbon Fiber

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research at ORNL | Department of Energy Ford-Dow Partnership Is Linked to Carbon Fiber Research at ORNL EERE Success Story-Ford-Dow Partnership Is Linked to Carbon Fiber Research at ORNL May 16, 2013 - 12:00am Addthis EERE provided funding to Dow Chemical, Ford Motor Company, and ORNL to demonstrate a novel polymer fiber material and production process technology. These funds support EERE's strategy of investing in emerging technologies that create high-quality, domestic manufacturing jobs

  11. Computer memory management system

    DOE Patents [OSTI]

    Kirk, III, Whitson John

    2002-01-01

    A computer memory management system utilizing a memory structure system of "intelligent" pointers in which information related to the use status of the memory structure is designed into the pointer. Through this pointer system, The present invention provides essentially automatic memory management (often referred to as garbage collection) by allowing relationships between objects to have definite memory management behavior by use of coding protocol which describes when relationships should be maintained and when the relationships should be broken. In one aspect, the present invention system allows automatic breaking of strong links to facilitate object garbage collection, coupled with relationship adjectives which define deletion of associated objects. In another aspect, The present invention includes simple-to-use infinite undo/redo functionality in that it has the capability, through a simple function call, to undo all of the changes made to a data model since the previous `valid state` was noted.

  12. Automated Demand Response: The Missing Link in the Electricity Value Chain

    SciTech Connect (OSTI)

    McKane, Aimee; Rhyne, Ivin; Piette, Mary Ann; Thompson, Lisa; Lekov, Alex

    2008-08-01

    In 2006, the Public Interest Energy Research Program (PIER) Demand Response Research Center (DRRC) at Lawrence Berkeley National Laboratory initiated research into Automated Demand Response (OpenADR) applications in California industry. The goal is to improve electric grid reliability and lower electricity use during periods of peak demand. The purpose of this research is to begin to define the relationship among a portfolio of actions that industrial facilities can undertake relative to their electricity use. This 'electricity value chain' defines energy management and demand response (DR) at six levels of service, distinguished by the magnitude, type, and rapidity of response. One element in the electricity supply chain is OpenADR, an open-standards based communications system to send signals to customers to allow them to manage their electric demand in response to supply conditions, such as prices or reliability, through a set of standard, open communications. Initial DRRC research suggests that industrial facilities that have undertaken energy efficiency measures are probably more, not less, likely to initiate other actions within this value chain such as daily load management and demand response. Moreover, OpenADR appears to afford some facilities the opportunity to develop the supporting control structure and to 'demo' potential reductions in energy use that can later be applied to either more effective load management or a permanent reduction in use via energy efficiency. Under the right conditions, some types of industrial facilities can shift or shed loads, without any, or minimal disruption to operations, to protect their energy supply reliability and to take advantage of financial incentives. In 2007 and 2008, 35 industrial facilities agreed to implement OpenADR, representing a total capacity of nearly 40 MW. This paper describes how integrated or centralized demand management and system-level network controls are linked to OpenADR systems. Case studies

  13. Automated Demand Response: The Missing Link in the Electricity Value Chain

    SciTech Connect (OSTI)

    McKane, Aimee; Rhyne, Ivin; Lekov, Alex; Thompson, Lisa; Piette, MaryAnn

    2009-08-01

    In 2006, the Public Interest Energy Research Program (PIER) Demand Response Research Center (DRRC) at Lawrence Berkeley National Laboratory initiated research into Automated Demand Response (OpenADR) applications in California industry. The goal is to improve electric grid reliability and lower electricity use during periods of peak demand. The purpose of this research is to begin to define the relationship among a portfolio of actions that industrial facilities can undertake relative to their electricity use. This ?electricity value chain? defines energy management and demand response (DR) at six levels of service, distinguished by the magnitude, type, and rapidity of response. One element in the electricity supply chain is OpenADR, an open-standards based communications system to send signals to customers to allow them to manage their electric demand in response to supply conditions, such as prices or reliability, through a set of standard, open communications. Initial DRRC research suggests that industrial facilities that have undertaken energy efficiency measures are probably more, not less, likely to initiate other actions within this value chain such as daily load management and demand response. Moreover, OpenADR appears to afford some facilities the opportunity to develop the supporting control structure and to"demo" potential reductions in energy use that can later be applied to either more effective load management or a permanent reduction in use via energy efficiency. Under the right conditions, some types of industrial facilities can shift or shed loads, without any, or minimal disruption to operations, to protect their energy supply reliability and to take advantage of financial incentives.1 In 2007 and 2008, 35 industrial facilities agreed to implement OpenADR, representing a total capacity of nearly 40 MW. This paper describes how integrated or centralized demand management and system-level network controls are linked to OpenADR systems. Case studies

  14. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A.; Carey, Donald O.

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  15. Dynamic graph system for a semantic database

    DOE Patents [OSTI]

    Mizell, David

    2015-01-27

    A method and system in a computer system for dynamically providing a graphical representation of a data store of entries via a matrix interface is disclosed. A dynamic graph system provides a matrix interface that exposes to an application program a graphical representation of data stored in a data store such as a semantic database storing triples. To the application program, the matrix interface represents the graph as a sparse adjacency matrix that is stored in compressed form. Each entry of the data store is considered to represent a link between nodes of the graph. Each entry has a first field and a second field identifying the nodes connected by the link and a third field with a value for the link that connects the identified nodes. The first, second, and third fields represent the rows, column, and elements of the adjacency matrix.

  16. Dynamic graph system for a semantic database

    DOE Patents [OSTI]

    Mizell, David

    2016-04-12

    A method and system in a computer system for dynamically providing a graphical representation of a data store of entries via a matrix interface is disclosed. A dynamic graph system provides a matrix interface that exposes to an application program a graphical representation of data stored in a data store such as a semantic database storing triples. To the application program, the matrix interface represents the graph as a sparse adjacency matrix that is stored in compressed form. Each entry of the data store is considered to represent a link between nodes of the graph. Each entry has a first field and a second field identifying the nodes connected by the link and a third field with a value for the link that connects the identified nodes. The first, second, and third fields represent the rows, column, and elements of the adjacency matrix.

  17. NSLS control system upgrade

    SciTech Connect (OSTI)

    Smith, J.D.; Ramamoorthy, S.; Tang, Yong N.

    1995-12-31

    The NSLS consists of two storage rings, a booster and a linac. A major upgrade of the control system (installed in 1978) was undertaken and has been completed. The computer architecture is being changed from a three level star-network to a two level distributed system. The microprocessor subsystem, host computer and workstations, communication link and the main software components are being upgraded or replaced. Since the NSLS rings operate twenty four hours a day a year with minimum maintenance time, the key requirement during the upgrade phase is a non-disruptive transition with minimum downtime. Concurrent with the upgrade, some immediate improvements were required. This paper describes the various components of the upgraded system and outlines the future plans.

  18. Relevant Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Research Institiute(AMRI), UNO Area Hotels Chase Suite Hotel Baton Rouge Extended Stay America Holiday Inn South Baton Rouge Marriott Residence Inns Wyndham Garden Gulf Coast...

  19. Related Links

    Energy.gov [DOE]

    The Advanced Manufacturing Office (AMO) aligns its activities with recommendations from the President and his advisors, while drawing insights from industrial experts and research institutions. Learn more about national priorities for manufacturing from these influential reports.

  20. Resources & Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Project (PNWSGDP) Bonneville Power Administration (BPA) Wind Power CAISO Smart Grid Roadmap EPRI Cost & Benefit report for Smart Grid CERA: Smart Grid: Closing the Gap Between...

  1. Related Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    laser beams onto a fusion target about the size of a pencil eraser. NIF became operational in March 2009. NIF is the size of a sports stadium-three football fields could fit inside...

  2. MSDS Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    MSDS on the internet The Office of Occupational and Environmental Safety maintains a file of Material Safety Data Sheets (MSDS) sheets for LSU. Each laboratory or other location...

  3. Training Links

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, ...

  4. Tuning of cross-linking and mechanical properties of laser-deposited poly (methyl methacrylate) films

    SciTech Connect (OSTI)

    Sueske, Erik; Scharf, Thorsten; Krebs, Hans-Ulrich; Panchenko, Elena; Junkers, Thomas; Egorov, Mark; Buback, Michael; Kijewski, Harald

    2005-03-15

    The chemical composition, amount of cross-linking and its influence on the mechanical properties of poly(methyl methacrylate) (PMMA) thin films produced by pulsed laser deposition (PLD) at a wavelength of 248 nm under ultrahigh vacuum were investigated by infrared spectroscopy, scanning electron microscopy, size-exclusion chromatography, thermogravimetric analysis, and nanoindentation experiments. The films consist of two components, one fraction with a molecular weight well below that of the target material and a second fraction, which is cross-linked. Compared to bulk material, the Young's modulus of the film is increased. The amount of cross-linking in the film can be tuned by the applied laser fluence leading to changes of the mechanical properties.

  5. Remote facility sharing with ATM networks [PC based ATM Link Delay Simulator (LDS)]. Final report

    SciTech Connect (OSTI)

    Kung, H. T.

    2001-06-01

    The ATM Link Delay Simulator (LDS) adds propagation delay to the ATM link on which it is installed, to allow control of link propagation delay in network protocol experiments simulating an adjustable piece of optical fiber. Our LDS simulates a delay of between 1.5 and 500 milliseconds and is built with commodity PC hardware, only the ATM network interface card is not generally available. Our implementation is special in that it preserves the exact spacing of ATM data cells a feature that requires sustained high performance. Our implementation shows that applications demanding sustained high performance are possible on commodity PC hardware. This illustrates the promise that PC hardware has for adaptability to demanding specialized testing of high speed network.

  6. Robotic Intelligent System | GE Global Research

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Intelligent System Could Save Hospitals Millions Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Robotic Intelligent System Could Save Hospitals Millions Imagine an intelligent system managing the surgical tool sterilization process in a hospital-ensuring safe delivery of care, enabling new levels of hospital efficiency

  7. System Overview | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    System Overview Blue Gene/Q Versus Blue Gene/P BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] System Overview Machine

  8. Photo of the Week: Mapping the Link between Invasive Plants and Wildfire in

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the Mojave Desert | Department of Energy Mapping the Link between Invasive Plants and Wildfire in the Mojave Desert Photo of the Week: Mapping the Link between Invasive Plants and Wildfire in the Mojave Desert August 21, 2013 - 4:03pm Addthis Scientists at Pacific Northwest National Laboratory (PNNL) are using predictive tools to understand ecological changes driven by frequent fires due to invasive plant species in California’s Mojave Desert. In collaboration with the U.S. Geological

  9. System Safety Common Cause Analysis

    Energy Science and Technology Software Center (OSTI)

    1992-03-10

    The COMCAN fault tree analysis codes are designed to analyze complex systems such as nuclear plants for common causes of failure. A common cause event, or common mode failure, is a secondary cause that could contribute to the failure of more than one component and violates the assumption of independence. Analysis of such events is an integral part of system reliability and safety analysis. A significant common cause event is a secondary cause common tomore » all basic events in one or more minimal cut sets. Minimal cut sets containing events from components sharing a common location or a common link are called common cause candidates. Components share a common location if no barrier insulates any one of them from the secondary cause. A common link is a dependency among components which cannot be removed by a physical barrier (e.g.,a common energy source or common maintenance instructions).« less

  10. GRB 090227B: THE MISSING LINK BETWEEN THE GENUINE SHORT AND LONG GAMMA-RAY BURSTS

    SciTech Connect (OSTI)

    Muccino, M.; Ruffini, R.; Bianco, C. L.; Izzo, L.; Penacchioni, A. V. [Dip. di Fisica and ICRA, Sapienza Universita di Roma, Piazzale Aldo Moro 5, I-00185 Rome (Italy)] [Dip. di Fisica and ICRA, Sapienza Universita di Roma, Piazzale Aldo Moro 5, I-00185 Rome (Italy)

    2013-02-15

    The time-resolved spectral analysis of GRB 090227B, made possible by the Fermi-GBM data, allows us to identify in this source the missing link between the genuine short and long gamma-ray bursts (GRBs). Within the Fireshell model of the GRBs we predict genuine short GRBs: bursts with the same inner engine of the long bursts but endowed with a severely low value of the baryon load, B {approx}< 5 Multiplication-Sign 10{sup -5}. A first energetically predominant emission occurs at the transparency of the e {sup +} e {sup -} plasma, the Proper-GRB (P-GRB), followed by a softer emission, the extended afterglow. The typical separation between the two emissions is expected to be of the order of 10{sup -3}-10{sup -2} s. We identify the P-GRB of GRB 090227B in the first 96 ms of emission, where a thermal component with the temperature kT = (517 {+-} 28) keV and a flux comparable with the non-thermal part of the spectrum is observed. This non-thermal component as well as the subsequent emission, where there is no evidence for a thermal spectrum, is identified with the extended afterglow. We deduce a theoretical cosmological redshift z = 1.61 {+-} 0.14. We then derive the total energy E{sup tot}{sub e{sup +}e{sup -}}= (2.83{+-}0.15) Multiplication-Sign 10{sup 53} erg, the baryon load B = (4.13 {+-} 0.05) Multiplication-Sign 10{sup -5}, the Lorentz {Gamma} factor at transparency {Gamma}{sub tr} = (1.44 {+-} 0.01) Multiplication-Sign 10{sup 4}, and the intrinsic duration {Delta}t' {approx} 0.35 s. We also determine the average density of the circumburst medium (CBM), (n {sub CBM}) = (1.90 {+-} 0.20) Multiplication-Sign 10{sup -5} particles cm{sup -3}. There is no evidence of beaming in the system. In view of the energetics and of the baryon load of the source, as well as of the low interstellar medium and of the intrinsic timescale of the signal, we identify the GRB progenitor as a binary neutron star. From the recent progress in the theory of neutron stars, we obtain masses of

  11. Expedited Synthesis of Fluorine-18 Labeled Phenols. A Missing Link in PET Radiochemistry

    SciTech Connect (OSTI)

    Katzenellenbogen, John A.; Zhou, Dong

    2015-03-26

    Fluorine-18 (F-18) is arguably the most valuable radionuclide for positron emission tomographic (PET) imaging. However, while there are many methods for labeling small molecules with F-18 at aliphatic positions and on electron-deficient aromatic rings, there are essentially no reliable and practical methods to label electron-rich aromatic rings such as phenols, with F-18 at high specific activity. This is disappointing because fluorine-labeled phenols are found in many drugs; there are also many interesting plant metabolites and hormones that contain either phenols or other electron-rich aromatic systems such as indoles whose metabolism, transport, and distribution would be interesting to study if they could readily be labeled with F-18. Most approaches to label phenols with F-18 involve the labeling of electron-poor precursor arenes by nucleophilic aromatic substitution, followed by subsequent conversion to phenols by oxidation or other multi-step sequences that are often inefficient and time consuming. Thus, the lack of good methods for labeling phenols and other electron-rich aromatics with F-18 at high specific activity represents a significant methodological gap in F-18 radiochemistry that can be considered a “Missing Link in PET Radiochemistry”. The objective of this research project was to develop and optimize a series of unusual synthetic transformations that will enable phenols (and other electron-rich aromatic systems) to be labeled with F-18 at high specific activity, rapidly, reliably, and conveniently, thereby bridging this gap. Through the studies conducted with support of this project, we have substantially advanced synthetic methodology for the preparation of fluorophenols. Our progress is presented in detail in the sections below, and much has been published or presented publication; other components are being prepared for publication. In essence, we have developed a completely new method to prepare o-fluorophenols from non-aromatic precursors

  12. Computerized international geothermal information systems

    SciTech Connect (OSTI)

    Phillips, S.L.; Lawrence, J.D.; Lepman, S.R.

    1980-03-01

    The computerized international geothermal energy information system is reviewed. The review covers establishment of the Italy - United States linked data centers by the NATO Committee on Challenges of Modern Society, through a bilateral agreement, and up to the present time. The result of the information exchange project is given as the bibliographic and numerical data available from the data centers. Recommendations for the exchange of computerized geothermal information at the international level are discussed.

  13. Cross-Linked Nanoporous Materials from Reactive and Multifunctional Block Polymers

    SciTech Connect (OSTI)

    Seo, Myungeun; Amendt, Mark A.; Hillmyer, Marc A.

    2012-10-10

    Polylactide-b-poly(styrene-co-2-hydroxyethylmethacrylate) (PLA-b-P(S-co-HEMA)) and polylactide-b-poly(styrene-co-2-hydroxyethylacrylate) (PLA-b-P(S-co-HEA)) were synthesized by combination of ring-opening polymerization and reversible addition-fragmentation chain transfer polymerization. {sup 1}H nuclear magnetic resonance spectroscopy and size exclusion chromatography data indicated that the polymerizations were controlled and that hydroxyl groups were successfully incorporated into the block polymers. The polymers were reacted with 4,4{prime}-methylenebis(phenyl isocyanate) (MDI) to form the corresponding cross-linked materials. The materials were annealed at 150 C to complete the coupling reaction. Robust nanoporous materials were obtained from the cross-linked polymers by treatment with aqueous base to hydrolyze the PLA phase. Small-angle X-ray scattering study combined with scanning electron microscopy showed that MDI-cross-linked PLA-b-P(S-co-HEMA)/PLA-b-P(S-co-HEA) can adopt lamellar, hexagonally perforated lamellar, and hexagonally packed cylindrical morphologies after annealing. In particular, the HPL morphology was found to evolve from lamellae due to increase in volume fraction of PS phase as MDI reacted with hydroxyl groups. The reaction also kinetically trapped the morphology by cross-linking. Bicontinuous morphologies were also observed when dibutyltin dilaurate was added to accelerate reaction between the polymer and MDI.

  14. Turbocharger control system

    SciTech Connect (OSTI)

    Kawabata, Y.

    1987-02-17

    This patent describes a turbocharger control system utilized in an internal combustion engine having a turbocharger turbine with a downstream passage, a combustion chamber, an exhaust treatment device, an actuator, a link mechanism connected to the actuator, a compressor, and a throttle valve. The engine also has an engine intake manifold, air flow passage means leading from the compressor to the throttle valve and an exhaust passage leading from the combustion chamber. The system comprises: bypass passage means connecting the exhaust passage leading from the combustion chamber to the turbocharger turbine with the downstream passage of the turbine so as to connect the combustion chamber directly to the exhaust treatment device around the turbine; a waste gate valve connected to the actuator by means of the link mechanism so as to close the bypass passage wherein the actuator comprises a first chamber continuously communicating with atmospheric pressure, a second chamber connected to the air flow passage means leading from the compressor to the throttle valve, and a third chamber connected to the engine intake manifold; first spring means interposed in the first chamber for biasing the waste gate valve toward a closed position; and second spring means interposed in the third chamber and having a stronger spring load characteristic than the first spring means for biasing the waste gate valve towards an opened position.

  15. Ultra Safe And Secure Blasting System

    SciTech Connect (OSTI)

    Hart, M M

    2009-07-27

    The Ultra is a blasting system that is designed for special applications where the risk and consequences of unauthorized demolition or blasting are so great that the use of an extraordinarily safe and secure blasting system is justified. Such a blasting system would be connected and logically welded together through digital code-linking as part of the blasting system set-up and initialization process. The Ultra's security is so robust that it will defeat the people who designed and built the components in any attempt at unauthorized detonation. Anyone attempting to gain unauthorized control of the system by substituting components or tapping into communications lines will be thwarted in their inability to provide encrypted authentication. Authentication occurs through the use of codes that are generated by the system during initialization code-linking and the codes remain unknown to anyone, including the authorized operator. Once code-linked, a closed system has been created. The system requires all components connected as they were during initialization as well as a unique code entered by the operator for function and blasting.

  16. Proactive investigation of hydrocarbons released into a linked groundwater-surfacewater hydrologic system: Chevron Estero Marine Terminal

    SciTech Connect (OSTI)

    Tormey, D. ); Waldron, J. ); Culbertson, D. )

    1996-01-01

    When regulatory concern is high, it is critical to address potential ecological impacts early, and hence [open quotes]close the door[close quotes] on further unnecessary studies, as illustrated by the Chevron Estero Marine Terminal case study. Cutter stock (diesel-like hydrocarbons) leaked from a facility sump, reached the water table, and migrated laterally an unknown distance. Media reports led to heightened public and regulatory concern, and the information gap led to worst-case assumptions about the extent and impact of the release to the biota of a nearby creek (Toro Creek). Chevron undertook a rapid assessment with two goals: define the extent of cutter stock in soil and groundwater, and close the door on expensive biological studies of Toro Creek. The assessment consisted of installing a large number of small-diameter soil borings and temporary well points, monitor wells, and analyzing soil, groundwater, and hydraulic gradient. The information gap was very rapidly filled with the following comprehensive picture: (1) the cutter stock had mixed with heavy crude oil, was highly adsorptive to soil and practically insoluble in water; (2) the cutter stock had not reached Toro Creek; (3) Toro Creek is always a losing stream, hydraulically connected to groundwater beneath the Chevron facility; (4) the groundwater basin is isolated by bedrock boundaries. Early attention to Toro Creek and the Pacific Ocean, and open communication with concerned agencies effectively limited the investigation to soil and water.

  17. Proactive investigation of hydrocarbons released into a linked groundwater-surfacewater hydrologic system: Chevron Estero Marine Terminal

    SciTech Connect (OSTI)

    Tormey, D.; Waldron, J.; Culbertson, D.

    1996-12-31

    When regulatory concern is high, it is critical to address potential ecological impacts early, and hence {open_quotes}close the door{close_quotes} on further unnecessary studies, as illustrated by the Chevron Estero Marine Terminal case study. Cutter stock (diesel-like hydrocarbons) leaked from a facility sump, reached the water table, and migrated laterally an unknown distance. Media reports led to heightened public and regulatory concern, and the information gap led to worst-case assumptions about the extent and impact of the release to the biota of a nearby creek (Toro Creek). Chevron undertook a rapid assessment with two goals: define the extent of cutter stock in soil and groundwater, and close the door on expensive biological studies of Toro Creek. The assessment consisted of installing a large number of small-diameter soil borings and temporary well points, monitor wells, and analyzing soil, groundwater, and hydraulic gradient. The information gap was very rapidly filled with the following comprehensive picture: (1) the cutter stock had mixed with heavy crude oil, was highly adsorptive to soil and practically insoluble in water; (2) the cutter stock had not reached Toro Creek; (3) Toro Creek is always a losing stream, hydraulically connected to groundwater beneath the Chevron facility; (4) the groundwater basin is isolated by bedrock boundaries. Early attention to Toro Creek and the Pacific Ocean, and open communication with concerned agencies effectively limited the investigation to soil and water.

  18. Data Storage & File Systems | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    BG/Q File Systems Disk Quota Using HPSS Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Data Storage & File Systems BG/Q File Systems BG/Q File Systems: An overview of the BG/Q file systems available at ALCF. Disk

  19. Interagency mechanical operations group numerical systems group

    SciTech Connect (OSTI)

    1997-09-01

    This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.

  20. NBS/LANL racetrack microtron control system

    SciTech Connect (OSTI)

    Ayres, R.L.; Yoder, N.R.; Martin, E.R.; Trout, R.E.; Wilson, B.L.

    1985-01-01

    The distributed intelligence control system for the NBS/LANL racetrack microtron (RTM) is now nearing completion with all major subsystems implemented and tested, thus providing some operating experience with most of the control system innovations. These include a triple hierarchy of microprocessor-based control elements, consisting of a primary control station and multiple secondary and tertiary control stations; light-link coupling to a tertiary station which operates at a 100 kV potential; a common database shared by separate microprocessors for handling hardware control and operator interactions; and joy stick control of the entire system. A unique secondary station interpreter program was used to great advantage for testing and checkout of various control and monitoring subsystems. The hardware design of the control system is based on Multibus I crates containing commercial Multibus I boards and a few custom designed boards. The primary-secondary data link is a high speed, bidirectional, full-duplex, 8-bit, ''byte'' parallel link designed for this application. This link permits very fast updating of the monitored data (>5 per second) and timely response to operator control inputs at the primary station.

  1. Radio-optical reference frame link using the U.S. Naval observatory astrograph and deep CCD imaging

    SciTech Connect (OSTI)

    Zacharias, N.; Zacharias, M. I.

    2014-05-01

    Between 1997 and 2004 several observing runs were conducted, mainly with the CTIO 0.9 m, to image International Celestial Reference Frame (ICRF) counterparts (mostly QSOs) in order to determine accurate optical positions. Contemporary to these deep CCD images, the same fields were observed with the U.S. Naval Observatory astrograph in the same bandpass. They provide accurate positions on the Hipparcos/Tycho-2 system for stars in the 10-16 mag range used as reference stars for the deep CCD imaging data. Here we present final optical position results of 413 sources based on reference stars obtained by dedicated astrograph observations that were reduced following two different procedures. These optical positions are compared to radio very long baseline interferometry positions. The current optical system is not perfectly aligned to the ICRF radio system with rigid body rotation angles of 3-5 mas (= 3σ level) found between them for all three axes. Furthermore, statistically, the optical-radio position differences are found to exceed the total, combined, known errors in the observations. Systematic errors in the optical reference star positions and physical offsets between the centers of optical and radio emissions are both identified as likely causes. A detrimental, astrophysical, random noise component is postulated to be on about the 10 mas level. If confirmed by future observations, this could severely limit the Gaia to ICRF reference frame alignment accuracy to an error of about 0.5 mas per coordinate axis with the current number of sources envisioned to provide the link. A list of 36 ICRF sources without the detection of an optical counterpart to a limiting magnitude of about R = 22 is provided as well.

  2. Wire like link for cycle reproducible and cycle accurate hardware accelerator

    DOE Patents [OSTI]

    Asaad, Sameh; Kapur, Mohit; Parker, Benjamin D

    2015-04-07

    First and second field programmable gate arrays are provided which implement first and second blocks of a circuit design to be simulated. The field programmable gate arrays are operated at a first clock frequency and a wire like link is provided to send a plurality of signals between them. The wire like link includes a serializer, on the first field programmable gate array, to serialize the plurality of signals; a deserializer on the second field programmable gate array, to deserialize the plurality of signals; and a connection between the serializer and the deserializer. The serializer and the deserializer are operated at a second clock frequency, greater than the first clock frequency, and the second clock frequency is selected such that latency of transmission and reception of the plurality of signals is less than the period corresponding to the first clock frequency.

  3. Variable Delay Element For Jitter Control In High Speed Data Links

    DOE Patents [OSTI]

    Livolsi, Robert R.

    2002-06-11

    A circuit and method for decreasing the amount of jitter present at the receiver input of high speed data links which uses a driver circuit for input from a high speed data link which comprises a logic circuit having a first section (1) which provides data latches, a second section (2) which provides a circuit generates a pre-destorted output and for compensating for level dependent jitter having an OR function element and a NOR function element each of which is coupled to two inputs and to a variable delay element as an input which provides a bi-modal delay for pulse width pre-distortion, a third section (3) which provides a muxing circuit, and a forth section (4) for clock distribution in the driver circuit. A fifth section is used for logic testing the driver circuit.

  4. Development of a New Class of Low Cost, High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC)

    SciTech Connect (OSTI)

    Prasad Enjeti; J.W. Howze

    2003-12-01

    This project proposes to design and develop a new class of power converters (direct DC to AC) to drastically improve performance and optimize the cost, size, weight and volume of the DC to AC converter in SOFC systems. The proposed topologies employ a high frequency link; direct DC to AC conversion approach. The direct DC to AC conversion approach is more efficient and operates without an intermediate dc-link stage. The absence of the dc-link, results in the elimination of bulky, aluminum electrolytic capacitors, which in turn leads to a reduction in the cost, volume, size and weight of the power electronic converter. The feasibility of two direct DC to AC converter topologies and their suitability to meet SECA objectives will be investigated. Laboratory proto-type converters (3-5kW) will be designed and tested in Phase-1. A detailed design trade-off study along with the test results will be available in the form of a report for the evaluation of SECA Industrial partners. This project proposes to develop a new and innovative power converter technology suitable for Solid Oxide Fuel Cell (SOFC) power systems in accordance with SECA objectives. The proposed fuel cell inverter (FCI) employs state of the art power electronic devices configured in two unique topologies to achieve direct conversion of DC power (24-48V) available from a SOFC to AC power (120/240V, 60Hz) suitable for utility interface and powering stand alone loads. The primary objective is to realize cost effective fuel cell converter, which operates under a wide input voltage range, and output load swings with high efficiency and improved reliability.

  5. A Linked-Cell Domain Decomposition Method for Molecular Dynamics Simulation on a Scalable Multiprocessor

    DOE PAGES-Beta [OSTI]

    Yang, L. H.; Brooks III, E. D.; Belak, J.

    1992-01-01

    A molecular dynamics algorithm for performing large-scale simulations using the Parallel C Preprocessor (PCP) programming paradigm on the BBN TC2000, a massively parallel computer, is discussed. The algorithm uses a linked-cell data structure to obtain the near neighbors of each atom as time evoles. Each processor is assigned to a geometric domain containing many subcells and the storage for that domain is private to the processor. Within this scheme, the interdomain (i.e., interprocessor) communication is minimized.

  6. Characterization of intact N- and O-linked glycopeptides using higher energy collisional dissociation

    SciTech Connect (OSTI)

    Cao, Li; Tolic, Nikola; Qu, Yi; Meng, Da; Zhao, Rui; Zhang, Qibin; Moore, Ronald J.; Zink, Erika M.; Lipton, Mary S.; Pasa-Tolic, Ljiljana; Wu, Si

    2014-01-15

    Simultaneous elucidation of the glycan structure and the glycosylation site are needed to reveal the biological function of protein glycosylation. In this study, we employed a recent type of fragmentation termed higher energy collisional dissociation (HCD) to examine fragmentation patterns of intact glycopeptides generated from a mixture of standard glycosylated proteins. The normalized collisional energy (NCE) value for HCD was varied from 30% to 60% to evaluate the optimal conditions for the fragmentation of peptide backbones and glycoconjugates. Our results indicated that HCD with lower NCE valuespreferentially fragmented the sugar chains attached to the peptides to generate a ladder of neutral loss of monosaccharides, thus enabling the putative glycan structure characterization. Also, detection of the oxonium ions enabled unambiguous differentiation of glycopeptides from non-glycopeptides. On the contrary, HCD with higher NCE values preferentially fragmented the peptide backbone and thus provided information needed for confident peptide identification. We evaluated the HCD approach with alternating NCE parameters for confident characterization of intact N-linked and O-linked glycopeptides in a single liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. In addition, we applied a novel data analysis pipeline, so-called GlycoFinder, to form a basis for automated data analysis. Overall, 38 unique intact glycopeptides corresponding to eight glycosylation sites (including six N-linked and two O-linked sites) were confidently identified from a standard protein mixture. This approach provided concurrent characterization of both, the peptide and the glycan, thus enabling comprehensive structural characterization of glycoproteins in a single LC-MS/MS analysis.

  7. OSTIblog Articles in the E-Link Topic | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information Link Topic DOE OSTI Implements Re-organization: Sticking to Our Knitting While Meeting New Challenges by Brian Hitson 08 Apr, 2015 in The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI), a unit of the Office of Science, recently completed a restructuring to fulfill agency-wide responsibilities to collect, preserve, and disseminate scientific and technical information (STI) emanating from DOE research and development

  8. Switchable photoconductivity of quantum dot films using cross-linking ligands with light-sensitive structures.

    SciTech Connect (OSTI)

    Lilly, G. Daniel; Whalley, Adam C.; Grunder, Sergio; Valente, Cory; Frederick, Matthew T.; Stoddart, J. Fraser; Weiss, Emily A.

    2011-01-01

    This paper describes the use of a diarylethylene (DAE) ligand, which adopts structures that are sensitive to the wavelength of light, to cross-link films of CdSe quantum dots (QDs) within electrical junctions with photoswitchable conductivity. These QD-DAE films are deposited on indium-tin-oxide/poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (ITO/PEDOT:PSS) electrodes and have eutectic Ga-In top-contacts. The photocurrent density of the cross-linked QD films is enhanced by a factor of 6.5 (averaged over all applied voltages) when the DAE ligand is switched from its open, non-conductive form (by illumination with 500650 nm light) to its closed, conductive form (by illumination with 300400 nm light). This enhancement is accomplished by changing the inter-particle electronic coupling, not the inter-particle distance. Identical QD films cross-linked with dibenzenedithiol ligands have a photoconductivity that is insensitive to the wavelength of light.

  9. Control method and system for hydraulic machines employing a dynamic joint motion model

    DOE Patents [OSTI]

    Danko, George

    2011-11-22

    A control method and system for controlling a hydraulically actuated mechanical arm to perform a task, the mechanical arm optionally being a hydraulically actuated excavator arm. The method can include determining a dynamic model of the motion of the hydraulic arm for each hydraulic arm link by relating the input signal vector for each respective link to the output signal vector for the same link. Also the method can include determining an error signal for each link as the weighted sum of the differences between a measured position and a reference position and between the time derivatives of the measured position and the time derivatives of the reference position for each respective link. The weights used in the determination of the error signal can be determined from the constant coefficients of the dynamic model. The error signal can be applied in a closed negative feedback control loop to diminish or eliminate the error signal for each respective link.

  10. Project ATHENA creates surrogate human organ systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Project ATHENA creates surrogate human organ systems Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Project ATHENA creates surrogate human organ systems The development of miniature surrogate human organs, coupled with highly sensitive mass spectrometry technologies, could one day revolutionize the way new drugs and toxic agents are studied. July 1, 2015 ATHENA prototype undergoes testing. ATHENA prototype undergoes

  11. Jefferson Lab Project Control System Manual

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    IP > Project Control System Manual Privacy and Security Notice Skip over navigation Search the JLab Site Search Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Jefferson Lab Navigation Home Search print version LINKS CEBAF 12 GeV Upgrade FEL Contact Our Staff Directorate Project Control System Manual Technical Engineering Development Facility (TEDF) Utilities

  12. BG/Q File Systems | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    BG/Q File Systems Disk Quota Using HPSS Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] BG/Q File Systems Vesta and Mira have discrete file systems, with two main user file systems for each machine: home and

  13. High-performance computer system installed at Los Alamos National

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Laboratory High-performance computer system installed at Los Alamos National Laboratory Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit High-performance computer system installed at Los Alamos National Laboratory New high-performance computer system, called Wolf, will be used for unclassified research September 2, 2014 New insights to changing the atomic structure of metals The Wolf computer system modernizes

  14. Zero-length Cross-linking in Solid State as an Approach for Analysis of Protein -Protein Interactions

    SciTech Connect (OSTI)

    Elshafey, Ahmed; Tolic, Nikola; Young, Malin M.; Sale, Kenneth L.; Smith, Richard D.; Kery, Vladimir

    2006-03-01

    Analyzing the architecture of protein complexes is a difficult task. Chemical cross-linking is often used in combination with mass spectrometric analysis to elucidate the interaction interfaces between proteins. We have developed a new approach for the analysis of interacting interfaces in protein complexes based on cross-linking in the solid state. Protein complexes are freeze-dried under vacuum and cross-links are introduced in the solid phase by dehydrating the protein in a non-water solvent, thus, creating peptide bonds between amino and carboxyl groups of the interacting peptides. Cross-linked proteins are digested into peptides with trypsin in both H216O and H218O and then readily distinguished in mass spectra by characteristic 8 atomic mass unit (amu) shifts reflecting incorporation of two 18O atoms into each C-terminus of proteolytic peptides. Computer analysis of mass spectrometry (MS) and MS/MS data is used to identify the cross-linked peptides.We demonstrated our method by cross-linking homooligomeric protein complexes alone or in a mixture of many other proteins. Cross-linking in the solid state was shown to be specific and reproducible. Glutathione-S-transferase (GST) from Schistosoma japonicum was studied in more detail. Twenty-seven unique intra-molecular and two inter-molecular cross-linked peptides were identified using tryptic mapping followed by LTQ-MS analysis. Identified cross-links were predominantly of amide origin, but six esters and thioesters were also found. Identified cross-linked peptides were validated by computational (visualization of cross-links in the three-dimensional [3D] structure of GST) and experimental (MS/MS) analyses. Most of the identified cross-links matched interacting peptides in the native 3D structure of GST indicating that the structure of GST and its oligomeric complex remained primarily intact after freeze drying. The pattern of oligomeric GST obtained in solid state was the same as that obtained in solution by Ru

  15. Wireless Technologies Implications for Power Systems

    SciTech Connect (OSTI)

    Fuhr, Peter L; Manges, Wayne W; Schweitzer, Patrick; Kagan, Hesh

    2010-01-01

    Wireless technologies have advanced well beyond simple SCADA radio systems and point-to-point links. The current applications supported by industrial-grade wireless sensors and systems range from field measurements (classic I/O) to voice, video, asset tracking, mobile operators, etc. Which such a wide array of supported applications, the belief that wireless technology will only impact power systems in terms of wireless sensors is shortsighted. This paper, coauthored by a group of individuals intimately involved in the general realm of industrial wireless , presents a simple snapshot of current radio technologies that are used (or seriously contemplated for use) in power systems.

  16. Macro-System Model for Hydrogen Energy Systems Analysis in Transportation: Preprint

    SciTech Connect (OSTI)

    Diakov, V.; Ruth, M.; Sa, T. J.; Goldsby, M. E.

    2012-06-01

    The Hydrogen Macro System Model (MSM) is a simulation tool that links existing and emerging hydrogen-related models to perform rapid, cross-cutting analysis. It allows analysis of the economics, primary energy-source requirements, and emissions of hydrogen production and delivery pathways.

  17. A New ATLAS Muon CSC Readout System with System on Chip Technology on ATCA Platform

    DOE PAGES-Beta [OSTI]

    Claus, R.; /SLAC

    2015-10-27

    The ATLAS muon Cathode Strip Chamber (CSC) back-end readout system has been upgraded during the LHC 2013-2015 shutdown to be able to handle the higher Level-1 trigger rate of 100 kHz and the higher occupancy at Run 2 luminosity. The readout design is based on the Reconfiguration Cluster Element (RCE) concept for high bandwidth generic DAQ implemented on the ATCA platform. The RCE design is based on the new System on Chip Xilinx Zynq series with a processor-centric architecture with ARM processor embedded in FPGA fabric and high speed I/O resources together with auxiliary memories to form a versatile DAQmore » building block that can host applications tapping into both software and firmware resources. The Cluster on Board (COB) ATCA carrier hosts RCE mezzanines and an embedded Fulcrum network switch to form an online DAQ processing cluster. More compact firmware solutions on the Zynq for G-link, S-link and TTC allowed the full system of 320 G-links from the 32 chambers to be processed by 6 COBs in one ATCA shelf through software waveform feature extraction to output 32 S-links. The full system was installed in Sept. 2014. We will present the RCE/COB design concept, the firmware and software processing architecture, and the experience from the intense commissioning towards LHC Run 2.« less

  18. Secure Control Systems for the Energy Sector

    SciTech Connect (OSTI)

    Smith, Rhett; Campbell, Jack; Hadley, Mark

    2012-03-31

    Schweitzer Engineering Laboratories (SEL) will conduct the Hallmark Project to address the need to reduce the risk of energy disruptions because of cyber incidents on control systems. The goals is to develop solutions that can be both applied to existing control systems and designed into new control systems to add the security measures needed to mitigate energy network vulnerabilities. The scope of the Hallmark Project contains four primary elements: 1. Technology transfer of the Secure Supervisory Control and Data Acquisition (SCADA) Communications Protocol (SSCP) from Pacific Northwest National Laboratories (PNNL) to Schweitzer Engineering Laboratories (SEL). The project shall use this technology to develop a Federal Information Processing Standard (FIPS) 140-2 compliant original equipment manufacturer (OEM) module to be called a Cryptographic Daughter Card (CDC) with the ability to directly connect to any PC enabling that computer to securely communicate across serial to field devices. Validate the OEM capabilities with another vendor. 2. Development of a Link Authenticator Module (LAM) using the FIPS 140-2 validated Secure SCADA Communications Protocol (SSCP) CDC module with a central management software kit. 3. Validation of the CDC and Link Authenticator modules via laboratory and field tests. 4. Creation of documents that record the impact of the Link Authenticator to the operators of control systems and on the control system itself. The information in the documents can assist others with technology deployment and maintenance.

  19. Linking environmental justice and sustainable development for the 21st century

    SciTech Connect (OSTI)

    Goldman, B.A.

    1995-12-01

    This presentation proposes proposes that environmental justice and sustainable development represent the most significant challenges facing environmental professionals during the next 20 years. It will explore the linkages and tensions between these two emerging fields of research and application, as well as their implications for the environmental professions. Questions addressed will include: (1) What is the conceptual link between these ideas? (2) If cost-benefit analysis, taking, and unfunded mandates are the Republican Congress`s top environmental priorities, what do these issues mean from the perspectives of environmental justice and sustainability? (3) What do the justice and sustainability perspectives imply for the future direction of environmental research and advocacy?

  20. File Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    on PDSF please see Eliza File Systems and Other File Systems. Below is a summary of how ATLAS uses the various systems: common In the past ATLAS used common primarily for their...

  1. System Diagram

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    System Diagram System Diagram Diagram of IO architecture on Hopper Diagram of external IO services on the Hopper system Last edited: 2011-04-14 15:11:1...

  2. System Diagram

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    System Diagram System Diagram Diagram of I/O architecture on Hopper Diagram of external I/O services on the Hopper system Last edited: 2016-04-29 11:35:23

  3. Vapor Sensing Using Conjugated Molecule-Linked Au Nanoparticles in a Silica Matrix

    DOE PAGES-Beta [OSTI]

    Dirk, Shawn M.; Howell, Stephen W.; Price, B. Katherine; Fan, Hongyou; Washburn, Cody; Wheeler, David R.; Tour, James M.; Whiting, Joshua; Simonson, R. Joseph

    2009-01-01

    Cross-linkedmore » assemblies of nanoparticles are of great value as chemiresistor-type sensors. Herein, we report a simple method to fabricate a chemiresistor-type sensor that minimizes the swelling transduction mechanism while optimizing the change in dielectric response. Sensors prepared with this methodology showed enhanced chemoselectivity for phosphonates which are useful surrogates for chemical weapons. Chemoselective sensors were fabricated using an aqueous solution of gold nanoparticles that were then cross-linked in the presence of the silica precursor, tetraethyl orthosilicate with the α -, ω -dithiolate (which is derived from the in situ deprotection of 1,4-di(Phenylethynyl- 4 ′ , 4 ″ -diacetylthio)-benzene ( 1 ) with wet triethylamine). The cross-linked nanoparticles and silica matrix were drop coated onto interdigitated electrodes having 8  μ m spacing. Samples were exposed to a series of analytes including dimethyl methylphosphonate (DMMP), octane, and toluene. A limit of detection was obtained for each analyte. Sensors assembled in this fashion were more sensitive to dimethyl methylphosphonate than to octane by a factor of 1000.« less

  4. Staggered scheduling of sensor estimation and fusion for tracking over long-haul links

    DOE PAGES-Beta [OSTI]

    Liu, Qiang; Rao, Nageswara S. V.; Wang, Xin

    2016-08-01

    Networked sensing can be found in a multitude of real-world applications. Here, we focus on the communication-and computation-constrained long-haul sensor networks, where sensors are remotely deployed over a vast geographical area to perform certain tasks. Of special interest is a class of such networks where sensors take measurements of one or more dynamic targets and send their state estimates to a remote fusion center via long-haul satellite links. The severe loss and delay over such links can easily reduce the amount of sensor data received by the fusion center, thereby limiting the potential information fusion gain and resulting in suboptimalmore » tracking performance. In this paper, starting with the temporal-domain staggered estimation for an individual sensor, we explore the impact of the so-called intra-state prediction and retrodiction on estimation errors. We then investigate the effect of such estimation scheduling across different sensors on the spatial-domain fusion performance, where the sensing time epochs across sensors are scheduled in an asynchronous and staggered manner. In particular, the impact of communication delay and loss as well as sensor bias on such scheduling is explored by means of numerical and simulation studies that demonstrate the validity of our analysis.« less

  5. Computer System,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    undergraduate summer institute http:isti.lanl.gov (Educational Prog) 2016 Computer System, Cluster, and Networking Summer Institute Purpose The Computer System,...

  6. Pressure Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Engineering > Pressure Systems Privacy and Security Notice Skip over navigation Search the JLab Site Pressure Systems Please upgrade your browser. This site's design is only ...

  7. Self-replenishing ability of cross-linked low surface energy polymer films investigated by a complementary experimental-simulation approach

    SciTech Connect (OSTI)

    Esteves, A. C. C. E-mail: g.dewith@tue.nl; Lyakhova, K.; Riel, J. M. van; With, G. de E-mail: g.dewith@tue.nl; Ven, L. G. J. van der; Benthem, R. A. T. M. van

    2014-03-28

    Nowadays, many self-healing strategies are available for recovering mechanical damage of bulk polymeric materials. The recovery of surface-dependent functionalities on polymer films is, however, equally important and has been less investigated. In this work we study the ability of low surface energy cross-linked poly(ester urethane) networks containing perfluorinated dangling chains to self-replenish their surface, after being submitted to repeated surface damage. For this purpose we used a combined experimental-simulation approach. Experimentally, the cross-linked films were intentionally damaged by cryo-microtoming to remove top layers and create new surfaces which were characterized by water Contact Angle measurements and X-Ray Photoelectron Spectroscopy. The same systems were simultaneously represented by a Dissipative Particles Dynamics simulation method, where the damage was modeled by removing the top film layers in the simulation box and replacing it by new “air” beads. The influence of different experimental parameters, such as the concentration of the low surface energy component and the molecular mobility span of the dangling chains, on the surface recovery is discussed. The combined approach reveals important details of the self-replenishing ability of damaged polymer films such as the occurrence of multiple-healing events, the self-replenishing efficiency, and the minimum “healing agent” concentration for a maximum recovery.

  8. Contribution of N-linked glycans on HSV-2 gB to cell–cell fusion and viral entry

    SciTech Connect (OSTI)

    Luo, Sukun; Hu, Kai; He, Siyi; Wang, Ping; Zhang, Mudan; Huang, Xin; Du, Tao; Zheng, Chunfu; Liu, Yalan; Hu, Qinxue

    2015-09-15

    HSV-2 is the major cause of genital herpes and its infection increases the risk of HIV-1 acquisition and transmission. HSV-2 glycoprotein B together with glycoproteins D, H and L are indispensable for viral entry, of which gB, as a class III fusogen, plays an essential role. HSV-2 gB has seven potential N-linked glycosylation (N-CHO) sites, but their significance has yet to be determined. For the first time, we systematically analyzed the contributions of N-linked glycans on gB to cell–cell fusion and viral entry. Our results demonstrated that, of the seven potential N-CHO sites on gB, mutation at N390, N483 or N668 decreased cell–cell fusion and viral entry, while mutation at N133 mainly affected protein expression and the production of infectious virus particles by blocking the transport of gB from the endoplasmic reticulum to Golgi. Our findings highlight the significance of N-linked glycans on HSV-2 gB expression and function. - Highlights: • N-linked glycan at N133 is important for gB intracellular trafficking and maturation. • N-linked glycans at N390, N483 and N668 on gB are necessary for optimal cell–cell fusion. • N-linked glycans at N390, N483 and N668 on gB are necessary for optimal viral entry.

  9. Thermoreversible Changes in Aligned and Cross-Linked Block Copolymer Melts Studied by Two Color Depolarized Light Scattering

    SciTech Connect (OSTI)

    Wilbur, Jeffrey D.; Gomez, Enrique D.; Ellsworth, Mark W.; Garetz, Bruce A.; Balsara, Nitash P.

    2012-09-04

    A procedure for creating samples that can be repeatedly cycled between weakly aligned and strongly aligned states is described. Poly(styrene-b-isoprene) block copolymer samples were first shear-aligned and then cross-linked using a high energy electron beam. Samples with more than 1.0 cross-links per chain on average showed almost complete recovery of their initial alignment state even after 20 cycles of heating above the order–disorder transition temperature of the un-cross-linked block copolymer. Samples with 1.1 cross-links per chain, which showed over 90% loss of alignment on heating and almost 100% recovery of alignment on cooling, provided the best example of a reversible aligned-to-unaligned transition. Samples with lower cross-linking densities exhibited irreversible loss of alignment upon heating, while those with higher cross-linking densities exhibited less than 90% loss of alignment upon heating. Alignment was quantified by a technique that we call two color depolarized light scattering (TCDLS), an extension of the traditional depolarized light scattering experiment used to determine the state of order in block copolymers. Qualitative confirmation of our interpretation of TCDLS data was obtained by small-angle X-ray scattering and transmission electron microscopy.

  10. Energy.gov Content Management System Requirements and Guidance | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Websites & Digital Media » Energy.gov Content Management System Requirements and Guidance Energy.gov Content Management System Requirements and Guidance The Office of Energy Efficiency and Renewable Energy's (EERE's) websites are hosted in Energy.gov's Drupal content management system (CMS), which is maintained by the U.S. Department of Energy's Public Affairs Office. Learn more about Energy.gov's Drupal CMS requirements and guidance for: Page types Block types Linking File

  11. The transputer based GA. SP data acquisition system

    SciTech Connect (OSTI)

    Colombo, D.; Avano, B.; DePoli, M.; Maron, G. ); Negro, A.; Parlati, G. )

    1992-04-01

    In this paper, the new data acquisition for the GA.SP detector is presented. It is a distributed system based on a network of 40 T800 and T222 transputers linked to a VME system used for histogram storage. A 100 MBit/s FDDI ring connects the system to UNIX workstations used for the experiment control, histogram display and second level data analysis.

  12. Linking morphology with activity through the lifetime of pretreated PtNi nanostructured thin film catalysts

    DOE PAGES-Beta [OSTI]

    Cullen, David A.; Lopez-Haro, Miguel; Bayle-Guillemaud, Pascale; Debe, Mark; Steinbach, Andrew J.; Guetaz, L.

    2015-04-10

    In this study, the nanoscale morphology of highly active Pt3Ni7 nanostructured thin film fuel cell catalysts is linked with catalyst surface area and activity following catalyst pretreatments, conditioning and potential cycling. The significant role of fuel cell conditioning on the structure and composition of these extended surface catalysts is demonstrated by high resolution imaging, elemental mapping and tomography. The dissolution of Ni during fuel cell conditioning leads to highly complex, porous structures which were visualized in 3D by electron tomography. Quantification of the rendered surfaces following catalyst pretreatment, conditioning, and cycling shows the important role pore structure plays in surfacemore » area, activity, and durability.« less

  13. Projection-Based linear constrained estimation and fusion over long-haul links

    SciTech Connect (OSTI)

    Rao, Nageswara S

    2016-01-01

    We study estimation and fusion with linear dynamics in long-haul sensor networks, wherein a number of sensors are remotely deployed over a large geographical area for performing tasks such as target tracking, and a remote fusion center serves to combine the information provided by these sensors in order to improve the overall tracking accuracy. In reality, the motion of a dynamic target might be subject to certain constraints, for instance, those defined by a road network. We explore the accuracy performance of projection-based constrained estimation and fusion methods that is affected by information loss over the long-haul links. We use an example to compare the tracking errors under various implementations of centralized and distributed projection-based estimation and fusion methods and demonstrate the effectiveness of using projection-based methods in these settings.

  14. Projection-Based Linear Constrained Estimation and Fusion over Long-Haul Links

    SciTech Connect (OSTI)

    Rao, Nageswara S

    2016-01-01

    In this work, we study estimation and fusion with linear dynamics in long-haul sensor networks, wherein a number of sensors are remotely deployed over a large geographical area for performing tasks such as target tracking, and a remote fusion center serves to combine the information provided by these sensors in order to improve the overall tracking accuracy. In reality, the motion of a dynamic target might be subject to certain constraints, for instance, those defined by a road network. We explore the accuracy performance of projection-based constrained estimation and fusion methods that is affected by information loss over the long-haul links. We use a tracking example to compare the tracking errors under various implementations of centralized and distributed projection-based estimation and fusion methods.

  15. Quantitative Visualization of ChIP-chip Data by Using Linked Views

    SciTech Connect (OSTI)

    Huang, Min-Yu; Weber, Gunther; Li, Xiao-Yong; Biggin, Mark; Hamann, Bernd

    2010-11-05

    Most analyses of ChIP-chip in vivo DNA binding have focused on qualitative descriptions of whether genomic regions are bound or not. There is increasing evidence, however, that factors bind in a highly overlapping manner to the same genomic regions and that it is quantitative differences in occupancy on these commonly bound regions that are the critical determinants of the different biological specificity of factors. As a result, it is critical to have a tool to facilitate the quantitative visualization of differences between transcription factors and the genomic regions they bind to understand each factor's unique roles in the network. We have developed a framework which combines several visualizations via brushing-and-linking to allow the user to interactively analyze and explore in vivo DNA binding data of multiple transcription factors. We describe these visualization types and also provide a discussion of biological examples in this paper.

  16. Synthesis and characterization of tunable coumarin- linked glasses as new class of organic/inorganic phosphors

    SciTech Connect (OSTI)

    Luridiana, Alberto; Pretta, Gianluca; Secci, Francesco; Frongia, Angelo; Chiriu, Daniele; Carbonaro, Carlo Maria; Corpino, Riccardo; Ricci, Pier Carlo

    2014-10-21

    It is well known that stilbene with a trans conformation is highly fluorescent. From the viewpoint of molecular structure, coumarins bear a carbon-carbon double bond which is fixed as trans conformation as in trans-stilbene through a lactone structure. This can help to avoid the trans-cis transformation of the double bond under ultraviolet (UV) irradiation as observed in stilbene compounds and results in strong fluorescence and high fluorescence quantum yield and photostability in most of coumarin derivatives. Herein we report some preliminary results about the synthesis and spectroscopic characterization of tunable coumarins and the development of a new linkage protocol for the obtainment of monolayer coumarin-covalently linked glasses. The resulting organic/inorganic coumarin/silica based Self-Assembled Monolayer (SMA) film is proposed as new phosphors for the substituting of critical raw materials, like rare earths, in photonics applications.

  17. Linking morphology with activity through the lifetime of pretreated PtNi nanostructured thin film catalysts

    SciTech Connect (OSTI)

    Cullen, David A.; Lopez-Haro, Miguel; Bayle-Guillemaud, Pascale; Debe, Mark; Steinbach, Andrew J.; Guetaz, L.

    2015-04-10

    In this study, the nanoscale morphology of highly active Pt3Ni7 nanostructured thin film fuel cell catalysts is linked with catalyst surface area and activity following catalyst pretreatments, conditioning and potential cycling. The significant role of fuel cell conditioning on the structure and composition of these extended surface catalysts is demonstrated by high resolution imaging, elemental mapping and tomography. The dissolution of Ni during fuel cell conditioning leads to highly complex, porous structures which were visualized in 3D by electron tomography. Quantification of the rendered surfaces following catalyst pretreatment, conditioning, and cycling shows the important role pore structure plays in surface area, activity, and durability.

  18. Identification of metabolic signatures linked to anti-inflammatory effects of Faecalibacterium prausnitzii

    DOE PAGES-Beta [OSTI]

    Miquel, Sylvie; Leclerc, Marion; Martin, Rebeca; Chain, Florian; Lenoir, Marion; Raguideau, Sébastien; Hudault, Sylvie; Bridonneau, Chantal; Northen, Trent; Bowen, Benjamin; et al

    2015-04-21

    Faecalibacterium prausnitzii is an anti-inflammatory commensal bacterium identified on the basis of human clinical data. The mechanisms underlying its beneficial effects are still unknown. Gnotobiotic mice harboring F. prausnitzii (A2-165) and Escherichia coli (K-12 JM105) were subjected to 2,4,6-trinitrobenzenesulfonic acid (TNBS)-induced acute colitis. The inflammatory colitis scores and a gas chromatography-time of flight (GC/TOF) mass spectrometry-based metabolomic profile were monitored in blood, ileum, cecum, colon, and feces in gnotobiotic mice. The potential anti-inflammatory metabolites were tested in vitro. We obtained stable E. coli and F. prausnitzii-diassociated mice in which E. coli primed the gastrointestinal tract (GIT), allowing a durable andmore » stable establishment of F. prausnitzii. The disease activity index, histological scores, myeloperoxidase (MPO) activity, and serum cytokine levels were significantly lower in the presence of F. prausnitzii after TNBS challenge. The protective effect of F. prausnitzii against colitis was correlated to its implantation level and was linked to overrepresented metabolites along the GIT and in serum. Among 983 metabolites in GIT samples and serum, 279 were assigned to known chemical reactions. Some of them, belonging to the ammonia (α-ketoglutarate), osmoprotective (raffinose), and phenolic (including anti-inflammatory shikimic and salicylic acids) pathways, were associated with a protective effect of F. prausnitzii, and the functional link was established in vitro for salicylic acid. We show for the first time that F. prausnitzii is a highly active commensal bacterium involved in reduction of colitis through in vivo modulation of metabolites along the GIT and in the peripheral blood.« less

  19. File Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    File Systems File Systems For a general description of the different file systems available on PDSF please see Eliza File Systems and Other File Systems. Below is a summary of how ALICE uses the various systems: /common ALICE uses /common to build the software that supports its grid-based automated production work. This software includes AliRoot, Geant, AliEn, and XRootD. /eliza6, /eliza8, /eliza17 ALICE has space on 3 elizas: 16TB on /eliza6, 6TB on /eliza8 and 11TB on /eliza17. The space on

  20. File Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    File Systems File Systems For a general description of the different file systems available on PDSF please see Eliza File Systems and Other File Systems. Below is a summary of how STAR uses the various systems: /common The STAR software is installed on /common. For 32sl44 it is under /common/star/star44 and for sl53 it is under /common/star/star53. In both cases the software consists primarily of a STAR-specific ROOT installation on which releases of the STAR libraries are built as shown on the

  1. Systems Engineering Building Advances Power Grid Research

    SciTech Connect (OSTI)

    Virden, Jud; Huang, Henry; Skare, Paul; Dagle, Jeff; Imhoff, Carl; Stoustrup, Jakob; Melton, Ron; Stiles, Dennis; Pratt, Rob

    2015-08-19

    Researchers and industry are now better equipped to tackle the nation’s most pressing energy challenges through PNNL’s new Systems Engineering Building – including challenges in grid modernization, buildings efficiency and renewable energy integration. This lab links real-time grid data, software platforms, specialized laboratories and advanced computing resources for the design and demonstration of new tools to modernize the grid and increase buildings energy efficiency.

  2. Kinetic Characterization of Strongly Coupled Systems

    SciTech Connect (OSTI)

    Knapek, C. A.; Ivlev, A. V.; Klumov, B. A.; Morfill, G. E.; Samsonov, D.

    2007-01-05

    We propose a simple method to determine the local coupling strength {gamma} experimentally, by linking the individual particle dynamics with the local density and crystal structure of a 2D plasma crystal. By measuring particle trajectories with high spatial and temporal resolution we obtain the first maps of {gamma} and temperature at individual particle resolution. We employ numerical simulations to test this new method, and discuss the implications to characterize strongly coupled systems.

  3. Dynamic Information Architecture System

    Energy Science and Technology Software Center (OSTI)

    1997-02-12

    The Dynamic Information System (DIAS) is a flexible object-based software framework for concurrent, multidiscplinary modeling of arbitrary (but related) processes. These processes are modeled as interrelated actions caused by and affecting the collection of diverse real-world objects represented in a simulation. The DIAS architecture allows independent process models to work together harmoniously in the same frame of reference and provides a wide range of data ingestion and output capabilities, including Geographic Information System (GIS) typemore » map-based displays and photorealistic visualization of simulations in progress. In the DIAS implementation of the object-based approach, software objects carry within them not only the data which describe their static characteristics, but also the methods, or functions, which describe their dynamic behaviors. There are two categories of objects: (1) Entity objects which have real-world counterparts and are the actors in a simulation, and (2) Software infrastructure objects which make it possible to carry out the simulations. The Entity objects contain lists of Aspect objects, each of which addresses a single aspect of the Entity''s behavior. For example, a DIAS Stream Entity representing a section of a river can have many aspects correspondimg to its behavior in terms of hydrology (as a drainage system component), navigation (as a link in a waterborne transportation system), meteorology (in terms of moisture, heat, and momentum exchange with the atmospheric boundary layer), and visualization (for photorealistic visualization or map type displays), etc. This makes it possible for each real-world object to exhibit any or all of its unique behaviors within the context of a single simulation.« less

  4. Performance Tested Comfort Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    & Events Expand News & Events Skip navigation links Residential Residential Lighting Energy Star Appliances Consumer Electronics Heat Pump Water Heaters Electric Storage Water...

  5. Variable Refrigerant Flow Systems

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Utility Resources News & Events Expand News & Events Skip navigation links Smart Grid Demand Response Energy Efficiency Emerging Technologies Current Research Portfolio...

  6. Probability of loss of assured safety in systems with multiple time-dependent failure modes.

    SciTech Connect (OSTI)

    Helton, Jon Craig; Pilch, Martin M.; Sallaberry, Cedric M.

    2012-09-01

    Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high-consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to deactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). Representations for PLOAS for situations in which both link physical properties and link failure properties are time-dependent are derived and numerically evaluated for a variety of WL/SL configurations, including PLOAS defined by (i) failure of all SLs before failure of any WL, (ii) failure of any SL before failure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS are considered.

  7. System Effectiveness

    SciTech Connect (OSTI)

    Powell, Danny H; Elwood Jr, Robert H

    2011-01-01

    An effective risk assessment system is needed to address the threat posed by an active or passive insider who, acting alone or in collusion, could attempt diversion or theft of nuclear material. It is critical that a nuclear facility conduct a thorough self-assessment of the material protection, control, and accountability (MPC&A) system to evaluate system effectiveness. Self-assessment involves vulnerability analysis and performance testing of the MPC&A system. The process should lead to confirmation that mitigating features of the system effectively minimize the threat, or it could lead to the conclusion that system improvements or upgrades are necessary to achieve acceptable protection against the threat. Analysis of the MPC&A system is necessary to understand the limits and vulnerabilities of the system to internal threats. Self-assessment helps the facility be prepared to respond to internal threats and reduce the risk of theft or diversion of nuclear material. MSET is a self-assessment or inspection tool utilizing probabilistic risk assessment (PRA) methodology to calculate the system effectiveness of a nuclear facility's MPC&A system. MSET analyzes the effectiveness of an MPC&A system based on defined performance metrics for MPC&A functions based on U.S. and international best practices and regulations. A facility's MC&A system can be evaluated at a point in time and reevaluated after upgrades are implemented or after other system changes occur. The total system or specific subareas within the system can be evaluated. Areas of potential performance improvement or system upgrade can be assessed to determine where the most beneficial and cost-effective improvements should be made. Analyses of risk importance factors show that sustainability is essential for optimal performance. The analyses reveal where performance degradation has the greatest detrimental impact on total system risk and where performance improvements have the greatest reduction in system risk

  8. Cross-Linking and Mass Spectrometry Methodologies to Facilitate Structural Biology: Finding a Path through the Maze

    SciTech Connect (OSTI)

    Merkley, Eric D.; Cort, John R.; Adkins, Joshua N.

    2013-09-01

    Multiprotein complexes, rather than individual proteins, make up a large part of the biological macromolecular machinery of a cell. Understanding the structure and organization of these complexes is critical to understanding cellular function. Chemical cross-linking coupled with mass spectrometry is emerging as a complementary technique to traditional structural biology methods and can provide low-resolution structural information for a multitude of purposes, such as distance constraints in computational modeling of protein complexes. In this review, we discuss the experimental considerations for successful application of chemical cross-linking-mass spectrometry in biological studies and highlight three examples of such studies from the recent literature. These examples (as well as many others) illustrate the utility of a chemical cross-linking-mass spectrometry approach in facilitating structural analysis of large and challenging complexes.

  9. F{sub o}F{sub 1}-ATPase activity regulated by external links on {beta} subunits

    SciTech Connect (OSTI)

    Cheng, Jie; Zhang, Xiao-ai; Graduate School of the Chinese Academy of Sciences, Beijing 100049 ; Shu, Yao-Gen; Yue, Jia-Chang

    2010-01-01

    F{sub o}F{sub 1}-ATPase activity is regulated by external links on {beta} subunits with different molecular weight. It is inhibited when anti-{beta} subunit antibody, streptavidin and H9 antibody link on the {beta} subunits successively, but is activated when virus was binded. Western blotting indicated that the employed anti-{beta} antibody target was on the non-catalytic site of the {beta} subunit. Furthermore, an ESR study of spin-labeled ATP (SL-ATP) showed that the affinity of ATP to the holoenzyme increases with increasing external links on the {beta} subunits. This simple regulation method may have great potential in the design of rapid, free labeled, sensitive and selective biosensors.

  10. THE FUELING DIAGRAM: LINKING GALAXY MOLECULAR-TO-ATOMIC GAS RATIOS TO INTERACTIONS AND ACCRETION

    SciTech Connect (OSTI)

    Stark, David V.; Kannappan, Sheila J.; Eckert, Kathleen D.; Wei, Lisa H.; Baker, Andrew J.; Leroy, Adam K.; Vogel, Stuart N.

    2013-05-20

    To assess how external factors such as local interactions and fresh gas accretion influence the global interstellar medium of galaxies, we analyze the relationship between recent enhancements of central star formation and total molecular-to-atomic (H{sub 2}/H I) gas ratios, using a broad sample of field galaxies spanning early-to-late type morphologies, stellar masses of 10{sup 7.2}-10{sup 11.2} M{sub Sun }, and diverse stages of evolution. We find that galaxies occupy several loci in a ''fueling diagram'' that plots H{sub 2}/H I ratio versus mass-corrected blue-centeredness, a metric tracing the degree to which galaxies have bluer centers than the average galaxy at their stellar mass. Spiral galaxies of all stellar masses show a positive correlation between H{sub 2}/H I ratio and mass-corrected blue-centeredness. When combined with previous results linking mass-corrected blue-centeredness to external perturbations, this correlation suggests a systematic link between local galaxy interactions and molecular gas inflow/replenishment. Intriguingly, E/S0 galaxies show a more complex picture: some follow the same correlation, some are quenched, and a distinct population of blue-sequence E/S0 galaxies (with masses below key scales associated with transitions in gas richness) defines a separate loop in the fueling diagram. This population appears to be composed of low-mass merger remnants currently in late- or post-starburst states, in which the burst first consumes the H{sub 2} while the galaxy center keeps getting bluer, then exhausts the H{sub 2}, at which point the burst population reddens as it ages. Multiple lines of evidence suggest connected evolutionary sequences in the fueling diagram. In particular, tracking total gas-to-stellar mass ratios within the fueling diagram provides evidence of fresh gas accretion onto low-mass E/S0s emerging from their central starburst episodes. Drawing on a comprehensive literature search, we suggest that virtually all galaxies

  11. Arrested rearrangement of TCR V[beta] genes in thymocytes from children with x-linked severe combined immunodeficiency disease

    SciTech Connect (OSTI)

    Sleasman, J.W.; Harville, T.O.; White, G.B.; Barrett, D.J. ); George, J.F. ); Goodenow, M.M. Univ. of Alabama, Birmingham, AL )

    1994-07-01

    Human X-linked severe combined immunodeficiency disease (SCID) is an immunodeficiency disorder in which T cell development is arrested in the thymic cortex. B lymphocytes in children with X-linked SCID seem to differentiate normally. X-linked SCID is associated with a mutation in the gene that encodes the IL-2R [gamma]-chain. Because TCR-[beta] gene recombination is a pivotal initial event in T lymphocyte onteogeny within the thymus, the authors hypothesized that a failure to express normal IL-2R[gamma] could lead to impaired TCR-[beta] gene recombination in early thymic development. PCR was used to determine the status of TCR-[beta] gene-segment rearrangements in thymic DNA that had been obtained from children with X-linked SCID. The initial step in TCR-[beta] gene rearrangement, that of D[beta] to J[beta] recombination, was readily detected in all thymus samples from children with X-linked SCID; in contrast, V[beta] to DJ[beta] gene rearrangements were undetectable in the same samples. Both D[beta] to J[beta] and V[beta] to DJ[beta] TCR genes were rearranged in the thymic tissues obtained from immunologically normal children. The authors conclude that TCR[beta]-chain gene rearrangement is arrested in children with X-linked SCID. The results suggest a causative relationship between the failure of TCR [beta]-chain gene arrangements to proceed beyond DJ[beta] rearrangements and the production of a nonfunctional IL-2R [gamma]-chain. 45 refs., 3 figs.

  12. Characterization by enzyme-linked immunosorbent assay of monoclonal antibodies to Pisum and Avena phytochrome

    SciTech Connect (OSTI)

    Cordonnier, M.M.; Greppin, H.; Pratt, L.H.

    1984-01-01

    Nine monoclonal antibodies to pea (Pisum sativum L.) and 16 to oat (Avena sativa L.) phytochrome are characterized by enzyme-linked immunosorbent assay against phytochrome from six different sources: pea, zucchini (Cucurbita pepo L.), lettuce (Lactuca sativa L.), oat, rye (Secale cereale L.), and barley (Hordeum vulgare L.). All antibodies were raised against phytochrome with a monomer size near 120,000 daltons. Nevertheless, none of them discriminated qualitatively between 118/114-kilodalton oat phytochrome and a photoreversible, 60-kilodalton proteolytic degradation product derived from it. In addition, none of the 23 antibodies tested discriminated substantially between phytochrome - red-absorbing form and phytochrome - far red-absorbing form. Two antibodies to pea and six to oat phytochrome also bound strongly to phytochrome from the other species, even though these two plants are evolutionarily widely divergent. Of these eight antibodies, two bound significantly to all of the six phytochrome preparations tested, indicating that these two may recognize highly conserved regions of the chromoprotein. Since the molecular function of phytochrome is unknown, these two antibodies may serve as unique probes for regions of this pigment that are important to its mode of action. 27 references, 3 figures, 1 table.

  13. Linking legacies: Connecting the Cold War nuclear weapons production processes to their environmental consequences

    SciTech Connect (OSTI)

    1997-01-01

    In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In support of this effort, the National Defense Authorization Act for Fiscal Year 1995 directed the Department of Energy (DOE) to describe the waste streams generated during each step in the production of nuclear weapons. Accordingly, this report responds to this mandate, and it is the Department`s first comprehensive analysis of the sources of waste and contamination generated by the production of nuclear weapons. The report also contains information on the missions and functions of nuclear weapons facilities, on the inventories of waste and materials remaining at these facilities, as well as on the extent and characteristics of contamination in and around these facilities. This analysis unites specific environmental impacts of nuclear weapons production with particular production processes. The Department used historical records to connect nuclear weapons production processes with emerging data on waste and contamination. In this way, two of the Department`s legacies--nuclear weapons manufacturing and environmental management--have become systematically linked. The goal of this report is to provide Congress, DOE program managers, non-governmental analysts, and the public with an explicit picture of the environmental results of each step in the nuclear weapons production and disposition cycle.

  14. Melamine/formaldehyde cross-linking of polymers for profile control

    SciTech Connect (OSTI)

    Mitchell, T.O.

    1988-11-29

    This patent describes a process for closing pores in a more permeable zone of a hydrocarbonaceous fluid bearing formation to obtain improved sweep efficiency prior to a waterflood oil recovery operation wherein the process comprises injecting into the formation of a gelable composition comprising: (a) water; (b) 0.2 to 5.0 wt. percent of a cross-linkable polymer having at least one functional group selected from a member of the group consisting of an amine, an amide, a hydroxyl, or a thiol group; and (c) 0.1 to 5.0 wt. percent of a methylol containing aminoplast resin which cross links with the polymer, thereby forming a gel of a size and strength sufficient to close pores in one or more permeable zones of the formation, the resin having amine and aldehyde in a critical mole ratio of from about 1:6 to about 1:30 respectively, which ratios are sufficient to form substantially improved stable gels for utilization in a subterranean formation during the recovery of hydrocarbonaceous fluids.

  15. {open_quotes}Unspecific{close_quotes} X-linked mental retardation: Clinical, genetic and molecular studies

    SciTech Connect (OSTI)

    Ropers, H.H.; Maacel, S. van der; Knoers, N.

    1994-09-01

    Previous linkage studies have assigned a gene for non-syndromic X-linked mental retardation (XMR) to at least 8 different regions on the X-chromosome. The fragile X-syndrome (FRAXA) does not account for more than 40% of all cases; in most XMR families early diagnosis and prevention is not possible. As part of a systematic study into {open_quotes}unspecific{close_quotes} XMR involving more than 30 non-FRAXA families, linkage studies have enabled us to map the respective genes in 4 families to the Xp11.4-q12 interval with peak lod scores around the ALAS2 locus. In three other families, the gene defect could be assigned to the KAL-DMD, DXS424-FRAXAC2 and DSX52-Xqter intervals, respectively. In one of these families, small stature due to growth hormone deficiency was observed as a distinctive clinical feature. Molecular cloning of the breakpoint in a mentally retarded girl with a balanced t(Xq13;13q) translocation has enabled us to isolate an X-chromosomal gene which is disrupted in this patient and is highly expressed in brain. YAC cloning strategies are being employed to clone another XMR gene, which has been identified previously in the vicinity of the CHM locus and genes involved in mentally retarded patients with two different inversions, inv(X)(q21p11) and inv(X)(p21q24), respectively.

  16. Application of Radial Basis Functional Link Networks to Exploration for Proterozoic Mineral Deposits in Central Iran

    SciTech Connect (OSTI)

    Behnia, Pouran [Geological Survey of Iran, Geomatics Department (Iran, Islamic Republic of)], E-mail: pouranb@yahoo.com

    2007-06-15

    The metallogeny of Central Iran is characterized mainly by the presence of several iron, apatite, and uranium deposits of Proterozoic age. Radial Basis Function Link Networks (RBFLN) were used as a data-driven method for GIS-based predictive mapping of Proterozoic mineralization in this area. To generate the input data for RBFLN, the evidential maps comprising stratigraphic, structural, geophysical, and geochemical data were used. Fifty-eight deposits and 58 'nondeposits' were used to train the network. The operations for the application of neural networks employed in this study involve both multiclass and binary representation of evidential maps. Running RBFLN on different input data showed that an increase in the number of evidential maps and classes leads to a larger classification sum of squared error (SSE). As a whole, an increase in the number of iterations resulted in the improvement of training SSE. The results of applying RBFLN showed that a successful classification depends on the existence of spatially well distributed deposits and nondeposits throughout the study area.

  17. THE NONLINEAR AND NONLOCAL LINK BETWEEN MACROSCOPIC ALFVNIC AND MICROSCOPIC ELECTROSTATIC SCALES IN THE SOLAR WIND

    SciTech Connect (OSTI)

    Valentini, F.; Vecchio, A.; Donato, S.; Carbone, V.; Veltri, P.; Briand, C.; Bougeret, J.

    2014-06-10

    The local heating of the solar-wind gas during its expansion represents one of the most intriguing problems in space plasma physics and is at present the subject of a relevant scientific effort. The possible mechanisms that could account for local heat production in the interplanetary medium are most likely related to the turbulent character of the solar-wind plasma. Nowadays, many observational and numerical analyses are devoted to the identification of fluctuation channels along which energy is carried from large to short wavelengths during the development of the turbulent cascade; these fluctuation channels establish the link between macroscopic and microscopic scales. In this Letter, by means of a quantitative comparison between in situ measurements in the solar wind from the STEREO spacecraft and numerical results from kinetic simulations, we identify an electrostatic channel of fluctuations that develops along the turbulent cascade in a direction parallel to the ambient magnetic field. This channel appears to be efficient in transferring the energy from large Alfvnic to short electrostatic acoustic-like scales up to a range of wavelengths where it can finally be turned into heat, even when the electron to proton temperature ratio is of the order of unity.

  18. Localizing multiple X chromosome-linked retinitis pigmentosa loci using multilocus homogeneity tests

    SciTech Connect (OSTI)

    Ott, J.; Terwilliger, J.D. ); Bhattacharya, S. ); Chen, J.D.; Denton, J.; Donald, J. ); Dubay, C.; Litt, M.; Weleber, R.G. ); Farrar, G.J.; Humphries, P. ); Fishman, G.A.; Wong, F. ); Frey, D.; Maechler, M. )

    1990-01-01

    Multilocus linkage analysis of 62 family pedigrees with X chromosome-linked retinitis pigmentosa (XLRP) was undertaken to determine the presence of possible multiple disease loci and to reliability estimate their map location. Multilocus homogeneity tests furnish convincing evidence for the presence of two XLRP loci, the likelihood ratio being 6.4 {times} 10{sup 9}:1 in a favor of two versus a single XLRP locus and gave accurate estimates for their map location. In 60-75% of the families, location of an XLRP gene was estimated at 1 centimorgan distal to OTC, and in 25-40% of the families, an XLRP locus was located halfway between DXS14 (p58-1) and DXZ1 (Xcen), with an estimated recombination fraction of 25% between the two XLRP loci. There is also good evidence for third XLRP locus, midway between DXS28 (C7) and DXS164 (pERT87), supported by a likelihood ratio of 293:1 for three versus two XLRP loci.

  19. Towards isolation of the gene for X-linked retinitis pigmentosa (RP3)

    SciTech Connect (OSTI)

    Dry, K.L.; Aldred, M.A.; Hardwick, L.J.

    1994-09-01

    Until recently the region of interest containing the gene for X-linked retinitis pigmentosa (RP3) was thought to lie between CYBB (Xp21.1) and the proximal end of the deletion in patient BB (JBBprox). This region was thought to span 100-150 kb. Here we present new mapping data to show that the distance between the 5{prime} (most proximal) end of CYBB and JBBprox is only 50 kb. Recently Roux et al. (1994) have described the isolation of a gene within this region but this showed no disease-associated changes. Further evidence from mapping the deletion in patient NF (who suffered from McLead`s syndrome and CGD but not RP) and from linkage analysis of our RP3 families with a new dinucleotide repeat suggests that the gene must extend proximally from JBBprox. In order to extend the region of search we have constructed a YAC contig spanning 800 kb to OTC. We are continuing our search for the RP3 gene using a variety of strategies including exon trapping and cDNA enrichment as well as direct screening of cDNA libraries with subclones from this region.

  20. A lock-free priority queue design based on multi-dimensional linked lists

    DOE PAGES-Beta [OSTI]

    Dechev, Damian; Zhang, Deli

    2015-04-03

    The throughput of concurrent priority queues is pivotal to multiprocessor applications such as discrete event simulation, best-first search and task scheduling. Existing lock-free priority queues are mostly based on skiplists, which probabilistically create shortcuts in an ordered list for fast insertion of elements. The use of skiplists eliminates the need of global rebalancing in balanced search trees and ensures logarithmic sequential search time on average, but the worst-case performance is linear with respect to the input size. In this paper, we propose a quiescently consistent lock-free priority queue based on a multi-dimensional list that guarantees worst-case search time of O(logN)more » for key universe of size N. The novel multi-dimensional list (MDList) is composed of nodes that contain multiple links to child nodes arranged by their dimensionality. The insertion operation works by first injectively mapping the scalar key to a high-dimensional vector, then uniquely locating the target position by using the vector as coordinates. Nodes in MDList are ordered by their coordinate prefixes and the ordering property of the data structure is readily maintained during insertion without rebalancing nor randomization. Furthermore, in our experimental evaluation using a micro-benchmark, our priority queue achieves an average of 50% speedup over the state of the art approaches under high concurrency.« less