National Library of Energy BETA

Sample records for linear program cases

  1. Comparison of open-source linear programming solvers.

    SciTech Connect

    Gearhart, Jared Lee; Adair, Kristin Lynn; Durfee, Justin David.; Jones, Katherine A.; Martin, Nathaniel; Detry, Richard Joseph

    2013-10-01

    When developing linear programming models, issues such as budget limitations, customer requirements, or licensing may preclude the use of commercial linear programming solvers. In such cases, one option is to use an open-source linear programming solver. A survey of linear programming tools was conducted to identify potential open-source solvers. From this survey, four open-source solvers were tested using a collection of linear programming test problems and the results were compared to IBM ILOG CPLEX Optimizer (CPLEX) [1], an industry standard. The solvers considered were: COIN-OR Linear Programming (CLP) [2], [3], GNU Linear Programming Kit (GLPK) [4], lp_solve [5] and Modular In-core Nonlinear Optimization System (MINOS) [6]. As no open-source solver outperforms CPLEX, this study demonstrates the power of commercial linear programming software. CLP was found to be the top performing open-source solver considered in terms of capability and speed. GLPK also performed well but cannot match the speed of CLP or CPLEX. lp_solve and MINOS were considerably slower and encountered issues when solving several test problems.

  2. Toward portable programming of numerical linear algebra on manycore...

    Office of Scientific and Technical Information (OSTI)

    Toward portable programming of numerical linear algebra on manycore nodes. Citation Details In-Document Search Title: Toward portable programming of numerical linear algebra on ...

  3. Physics Case for the International Linear Collider

    SciTech Connect

    Fujii, Keisuke; Grojean, Christophe; Peskin, Michael E.; Barklow, Tim; Gao, Yuanning; Kanemura, Shinya; Kim, Hyungdo; List, Jenny; Nojiri, Mihoko; Perelstein, Maxim; Poeschl, Roman; Reuter, Juergen; Simon, Frank; Tanabe, Tomohiko; Yu, Jaehoon; Wells, James D.; Murayama, Hitoshi; Yamamoto, Hitoshi; /Tohoku U.

    2015-06-23

    We summarize the physics case for the International Linear Collider (ILC). We review the key motivations for the ILC presented in the literature, updating the projected measurement uncertainties for the ILC experiments in accord with the expected schedule of operation of the accelerator and the results of the most recent simulation studies.

  4. Deterministic algorithms for 2-d convex programming and 3-d online linear programming

    SciTech Connect

    Chan, T.M.

    1997-06-01

    We present a deterministic algorithm for solving two-dimensional convex programs with a linear objective function. The algorithm requires O(k log k) primitive operations for k constraints; if a feasible point is given, the bound reduces to O(k log k/ log log k). As a consequence, we can decide whether k convex n-gons in the plane have a common intersection in O(k log n min (log k, log log n)) worst-case time. Furthermore, we can solve the three-dimensional online linear programming problem in o(log{sup 3} n) worst-case time per operation.

  5. Physics Case for the International Linear Collider (Technical...

    Office of Scientific and Technical Information (OSTI)

    We summarize the physics case for the International Linear Collider (ILC). We review the ... in accord with the expected schedule of operation of the accelerator and the results of ...

  6. Planning under uncertainty solving large-scale stochastic linear programs

    SciTech Connect

    Infanger, G. . Dept. of Operations Research Technische Univ., Vienna . Inst. fuer Energiewirtschaft)

    1992-12-01

    For many practical problems, solutions obtained from deterministic models are unsatisfactory because they fail to hedge against certain contingencies that may occur in the future. Stochastic models address this shortcoming, but up to recently seemed to be intractable due to their size. Recent advances both in solution algorithms and in computer technology now allow us to solve important and general classes of practical stochastic problems. We show how large-scale stochastic linear programs can be efficiently solved by combining classical decomposition and Monte Carlo (importance) sampling techniques. We discuss the methodology for solving two-stage stochastic linear programs with recourse, present numerical results of large problems with numerous stochastic parameters, show how to efficiently implement the methodology on a parallel multi-computer and derive the theory for solving a general class of multi-stage problems with dependency of the stochastic parameters within a stage and between different stages.

  7. Microgrid Reliability Modeling and Battery Scheduling Using Stochastic Linear Programming

    SciTech Connect

    Cardoso, Goncalo; Stadler, Michael; Siddiqui, Afzal; Marnay, Chris; DeForest, Nicholas; Barbosa-Povoa, Ana; Ferrao, Paulo

    2013-05-23

    This paper describes the introduction of stochastic linear programming into Operations DER-CAM, a tool used to obtain optimal operating schedules for a given microgrid under local economic and environmental conditions. This application follows previous work on optimal scheduling of a lithium-iron-phosphate battery given the output uncertainty of a 1 MW molten carbonate fuel cell. Both are in the Santa Rita Jail microgrid, located in Dublin, California. This fuel cell has proven unreliable, partially justifying the consideration of storage options. Several stochastic DER-CAM runs are executed to compare different scenarios to values obtained by a deterministic approach. Results indicate that using a stochastic approach provides a conservative yet more lucrative battery schedule. Lower expected energy bills result, given fuel cell outages, in potential savings exceeding 6percent.

  8. SLFP: A stochastic linear fractional programming approach for sustainable waste management

    SciTech Connect

    Zhu, H.; Huang, G.H.

    2011-12-15

    Highlights: > A new fractional programming (SLFP) method is developed for waste management. > SLFP can solve ratio optimization problems associated with random inputs. > A case study of waste flow allocation demonstrates its applicability. > SLFP helps compare objectives of two aspects and reflect system efficiency. > This study supports in-depth analysis of tradeoffs among multiple system criteria. - Abstract: A stochastic linear fractional programming (SLFP) approach is developed for supporting sustainable municipal solid waste management under uncertainty. The SLFP method can solve ratio optimization problems associated with random information, where chance-constrained programming is integrated into a linear fractional programming framework. It has advantages in: (1) comparing objectives of two aspects, (2) reflecting system efficiency, (3) dealing with uncertainty expressed as probability distributions, and (4) providing optimal-ratio solutions under different system-reliability conditions. The method is applied to a case study of waste flow allocation within a municipal solid waste (MSW) management system. The obtained solutions are useful for identifying sustainable MSW management schemes with maximized system efficiency under various constraint-violation risks. The results indicate that SLFP can support in-depth analysis of the interrelationships among system efficiency, system cost and system-failure risk.

  9. Business Case for Technical Qualification Program Accreditation...

    Energy.gov [DOE] (indexed site)

    Business Case for TQP Accreditation Incentives (21.27 KB) More Documents & Publications Technical Qualification Program Self-Assessment Report - Los Alamos Site Office - 2007 ...

  10. The MARX Modulator Development Program for the International Linear Collider

    SciTech Connect

    Leyh, G.E.; /SLAC

    2006-06-12

    The ILC Marx Modulator Development Program at SLAC is working towards developing a full-scale ILC Marx ''Reference Design'' modulator prototype, with the goal of significantly reducing the size and cost of the ILC modulator while improving overall modulator efficiency and availability. The ILC Reference Design prototype will provide a proof-of-concept model to industry in advance of Phase II SBIR funding, and also allow operation of the new 10MW L-Band Klystron prototypes immediately upon their arrival at SLAC.

  11. Introduction to the Value of Program Evaluation Case Study Series |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Introduction to the Value of Program Evaluation Case Study Series Introduction to the Value of Program Evaluation Case Study Series Case Studies Show the Value of Program Evaluation, part of the Value of Program Evaluation Case Study Series, sponsored by the U.S. Department of Energy, November 2009. Case Studies Show the Value of Program Evaluation (124.48 KB) More Documents & Publications Evaluation Helps Pesticide Program Finish Project Four Years Sooner Than

  12. Five case studies of multifamily weatherization programs

    SciTech Connect

    Kinney, L; Wilson, T.; Lewis, G.; MacDonald, M.

    1997-12-31

    The multifamily case studies that are the subject of this report were conducted to provide a better understanding of the approach taken by program operators in weatherizing large buildings. Because of significant variations in building construction and energy systems across the country, five states were selected based on their high level of multifamily weatherization. This report summarizes findings from case studies conducted by multifamily weatherization operations in five cities. The case studies were conducted between January and November 1994. Each of the case studies involved extensive interviews with the staff of weatherization subgrantees conducting multifamily weatherization, the inspection of 4 to 12 buildings weatherized between 1991 and 1993, and the analysis of savings and costs. The case studies focused on innovative techniques which appear to work well.

  13. Business Case for Technical Qualification Program Accreditation Incentives

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize the program throughout the Department by ensuring consistent application of TQP requirements. Business Case for TQP Accreditation Incentives (21.27 KB) More Documents & Publications Technical Qualification Program Self-Assessment Report - Los Alamos Site Office - 2007 Technical

  14. LDRD final report on massively-parallel linear programming : the parPCx system.

    SciTech Connect

    Parekh, Ojas; Phillips, Cynthia Ann; Boman, Erik Gunnar

    2005-02-01

    This report summarizes the research and development performed from October 2002 to September 2004 at Sandia National Laboratories under the Laboratory-Directed Research and Development (LDRD) project ''Massively-Parallel Linear Programming''. We developed a linear programming (LP) solver designed to use a large number of processors. LP is the optimization of a linear objective function subject to linear constraints. Companies and universities have expended huge efforts over decades to produce fast, stable serial LP solvers. Previous parallel codes run on shared-memory systems and have little or no distribution of the constraint matrix. We have seen no reports of general LP solver runs on large numbers of processors. Our parallel LP code is based on an efficient serial implementation of Mehrotra's interior-point predictor-corrector algorithm (PCx). The computational core of this algorithm is the assembly and solution of a sparse linear system. We have substantially rewritten the PCx code and based it on Trilinos, the parallel linear algebra library developed at Sandia. Our interior-point method can use either direct or iterative solvers for the linear system. To achieve a good parallel data distribution of the constraint matrix, we use a (pre-release) version of a hypergraph partitioner from the Zoltan partitioning library. We describe the design and implementation of our new LP solver called parPCx and give preliminary computational results. We summarize a number of issues related to efficient parallel solution of LPs with interior-point methods including data distribution, numerical stability, and solving the core linear system using both direct and iterative methods. We describe a number of applications of LP specific to US Department of Energy mission areas and we summarize our efforts to integrate parPCx (and parallel LP solvers in general) into Sandia's massively-parallel integer programming solver PICO (Parallel Interger and Combinatorial Optimizer). We

  15. Refining and end use study of coal liquids II - linear programming analysis

    SciTech Connect

    Lowe, C.; Tam, S.

    1995-12-31

    A DOE-funded study is underway to determine the optimum refinery processing schemes for producing transportation fuels that will meet CAAA regulations from direct and indirect coal liquids. The study consists of three major parts: pilot plant testing of critical upgrading processes, linear programming analysis of different processing schemes, and engine emission testing of final products. Currently, fractions of a direct coal liquid produced form bituminous coal are being tested in sequence of pilot plant upgrading processes. This work is discussed in a separate paper. The linear programming model, which is the subject of this paper, has been completed for the petroleum refinery and is being modified to handle coal liquids based on the pilot plant test results. Preliminary coal liquid evaluation studies indicate that, if a refinery expansion scenario is adopted, then the marginal value of the coal liquid (over the base petroleum crude) is $3-4/bbl.

  16. Fuzzy linear programming based optimal fuel scheduling incorporating blending/transloading facilities

    SciTech Connect

    Djukanovic, M.; Babic, B.; Milosevic, B.; Sobajic, D.J.; Pao, Y.H. |

    1996-05-01

    In this paper the blending/transloading facilities are modeled using an interactive fuzzy linear programming (FLP), in order to allow the decision-maker to solve the problem of uncertainty of input information within the fuel scheduling optimization. An interactive decision-making process is formulated in which decision-maker can learn to recognize good solutions by considering all possibilities of fuzziness. The application of the fuzzy formulation is accompanied by a careful examination of the definition of fuzziness, appropriateness of the membership function and interpretation of results. The proposed concept provides a decision support system with integration-oriented features, whereby the decision-maker can learn to recognize the relative importance of factors in the specific domain of optimal fuel scheduling (OFS) problem. The formulation of a fuzzy linear programming problem to obtain a reasonable nonfuzzy solution under consideration of the ambiguity of parameters, represented by fuzzy numbers, is introduced. An additional advantage of the FLP formulation is its ability to deal with multi-objective problems.

  17. Averaging and Linear Programming in Some Singularly Perturbed Problems of Optimal Control

    SciTech Connect

    Gaitsgory, Vladimir; Rossomakhine, Sergey

    2015-04-15

    The paper aims at the development of an apparatus for analysis and construction of near optimal solutions of singularly perturbed (SP) optimal controls problems (that is, problems of optimal control of SP systems) considered on the infinite time horizon. We mostly focus on problems with time discounting criteria but a possibility of the extension of results to periodic optimization problems is discussed as well. Our consideration is based on earlier results on averaging of SP control systems and on linear programming formulations of optimal control problems. The idea that we exploit is to first asymptotically approximate a given problem of optimal control of the SP system by a certain averaged optimal control problem, then reformulate this averaged problem as an infinite-dimensional linear programming (LP) problem, and then approximate the latter by semi-infinite LP problems. We show that the optimal solution of these semi-infinite LP problems and their duals (that can be found with the help of a modification of an available LP software) allow one to construct near optimal controls of the SP system. We demonstrate the construction with two numerical examples.

  18. Case Studies Show the Value of Program Evaluation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    
 1
 Case Studies Show the Value of Program Evaluation Value of Program Evaluation Case Study Series Sponsored by the U.S. Department of Energy, November 2009 The U.S Department of Energy sponsored several small case studies that clearly demonstrate the benefits that evaluation can provide to energy and environmental programs. The result is a set of five "Value of Program Evaluation" Case Studies (each 2-pages in length) documenting the benefits of implementing recommendations from

  19. Former Worker Program Surveillance Case Definitions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Surveillance Case Definitions Former Worker Program Surveillance Case Definitions February 2011 The surveillance case definitions were developed by a group of occupational medicine physicians that make up the FWP medical task group, to define the occupational medical conditions commonly discovered during the FWP medical screening exam to ensure consistency when reporting such conditions to DOE. Former Worker Program Surveillance Case Definitions (27.08 KB) More Documents & Publications

  20. Sixth SIAM conference on applied linear algebra: Final program and abstracts. Final technical report

    SciTech Connect

    1997-12-31

    Linear algebra plays a central role in mathematics and applications. The analysis and solution of problems from an amazingly wide variety of disciplines depend on the theory and computational techniques of linear algebra. In turn, the diversity of disciplines depending on linear algebra also serves to focus and shape its development. Some problems have special properties (numerical, structural) that can be exploited. Some are simply so large that conventional approaches are impractical. New computer architectures motivate new algorithms, and fresh ways to look at old ones. The pervasive nature of linear algebra in analyzing and solving problems means that people from a wide spectrum--universities, industrial and government laboratories, financial institutions, and many others--share an interest in current developments in linear algebra. This conference aims to bring them together for their mutual benefit. Abstracts of papers presented are included.

  1. The Super Efficient Refrigerator Program: Case study of a Golden Carrot program

    SciTech Connect

    Eckert, J B

    1995-07-01

    The work in this report was conducted by the Analytic Studies Division (ASD) of the National Renewable Energy Laboratory (NREL) for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy, Office of Building Technologies. This case study describes the development and implementation of the Super Efficient Refrigerator Program (SERP), which awarded $30 million to the refrigerator manufacturer that developed and commercialized a refrigerator that exceeded 1993 federal efficiency standards by at least 25%. The program was funded by 24 public and private utilities. As the first Golden Carrot program to be implemented in the United States, SERP was studied as an example for future `market-pull` efforts.

  2. The Case for a 500 GeV e+e- Linear Collider

    SciTech Connect

    Baggers, J.; Baltay, C.; Barker, T.; Barklow, T.; Bauer, U.; Bolton, T.; Brau, J.; Breidenbach, M.; Burke, D.; Burrows, P.; Dixon, L.; Fisk, H.E.; Frey, R.; Gerdes, D.; Graf, D.; Grannis, P.; Haber, H.E.; Hearty, C.; Hertzbach, S.; Heusch, C.; Hewett, J.; Hollebeek, R.; Jacobsen, R.; Jaros, J.; Kamon, T.; Karlen, D.; Koltick, D.; Kronfeld, A.; Marciano, W.; Markiewicz, T.; Murayama, H.; Nauenberg, U.; Orr, L.; Paige, F.; Para, A.; Peskin, M. E.; Porter, F.; Riles, K.; Ronan, M.; Rosenberg, L.; Schumm, B.; Stroynowski, R.; Tkaczyk, S.; Turcot, A.S.; van Bibber, K.; van Kooten, R.; Wells, J.D.; Yamamoto, H.

    2000-07-05

    Several proposals are being developed around the world for an e+e- linear collider with an initial center of mass energy of 500 GeV. In this paper, we will discuss why a project of this type deserves priority as the next major initiative in high energy physics.

  3. THE CASE FOR A 500 GEV E+E- LINEAR COLLIDER

    SciTech Connect

    BAGGER,J.; BALTAY,C.; ET AL; MARCIANO,W.; PAIGE,F.; TURCOT,A.S.; AMERICAN LINEAR COLLIDER WORKING GROUP

    2000-06-30

    There are now several proposals that have been put forward from around the world for an e{sup +}e{sup {minus}} linear collider with an initial center of mass energy of 500 GeV. In this paper, the authors discuss why a project of this type deserves priority as the next, major initiative in high energy physics.

  4. Ground-source heat pump case studies and utility programs

    SciTech Connect

    Lienau, P.J.; Boyd, T.L.; Rogers, R.L.

    1995-04-01

    Ground-source heat pump systems are one of the promising new energy technologies that has shown rapid increase in usage over the past ten years in the United States. These systems offer substantial benefits to consumers and utilities in energy (kWh) and demand (kW) savings. The purpose of this study was to determine what existing monitored data was available mainly from electric utilities on heat pump performance, energy savings and demand reduction for residential, school and commercial building applications. In order to verify the performance, information was collected for 253 case studies from mainly utilities throughout the United States. The case studies were compiled into a database. The database was organized into general information, system information, ground system information, system performance, and additional information. Information was developed on the status of demand-side management of ground-source heat pump programs for about 60 electric utility and rural electric cooperatives on marketing, incentive programs, barriers to market penetration, number units installed in service area, and benefits.

  5. Refining and end use study of coal liquids. Topical report: Petroleum Refinery; Linear Programming Model; and Design Basis

    SciTech Connect

    1995-03-01

    A model was developed for use in the Bechtel PIMS (Process Industry Modeling System) linear programming software to simulate a generic Midwest (PADD II) petroleum refinery of the future. This ``petroleum-only`` version of the model establishes the size and complexity of the refinery after the year 2000 and prior to the introduction of coal liquids. It should be noted that no assumption has been made on when a plant can be built to produce coal liquids except that it will be after the year 2000. The year 2000 was chosen because it is the latest year where fuel property and emission standards have been set by the Environmental Protection Agency. It assumes the refinery has been modified to accept crudes that are heavier in gravity and higher in sulfur than today`s average crude mix. In addition, the refinery has also been modified to produce a product slate of transportation fuels of the future (i.e. 40% reformulated gasolines). This model will be used as a basis for determining the optimum scheme for processing coal liquids in a petroleum refinery. This report summarizes the design basis for this ``petroleum only`` LP refinery model. A report detailing the refinery configuration when coal liquids are processed will be provided at a later date.

  6. Member Case Studies: LED Street Lighting Programs in Algona ...

    Energy Saver

    View the presentation slides View the text-alternative version Solid-State Lighting Home About the Solid-State Lighting Program Research & Development Understanding SSL Information ...

  7. TRB-Transit Cooperative Research Program (TCRP): Case Studies...

    OpenEI (Open Energy Information) [EERE & EIA]

    Transportation Research Board Focus Area: Transportation Resource Type: Publications, Lessons learnedbest practices, Case studiesexamples Website: www.trb.orgMainPublic...

  8. Voluntary Protection Program - Business Case for Safety | Department...

    Energy.gov [DOE] (indexed site)

    Business Case for Safety - DOE is Benchmark for DoD: Department of Defense Benchmarks VPP in Visit to Hanford Department of Defense Representatives Visit Hanford to Benchmark ...

  9. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Programming Compiling Codes on Hopper Cray provides a convenient set of wrapper commands that should be used in almost all cases for compiling and linking parallel programs. Invoking the wrappers will automatically link codes with the MPI libraries and other Cray system software libraries. All the MPI and Cray system include directories are also transparently imported. This page shows examples of how to compile codes on Franklin and Hopper. Read More » Shared and Dynamic Libraries

  10. Keys to success: Ten case studies of effective weatherization programs

    SciTech Connect

    Brown, M.A.; Berry, L.G.; Kolb, J.O.; White, D.L.; Kinney, L.F.; Wilson, T.

    1993-11-01

    In 1990, DOE initiated a nationwide evaluation of its Weatherization Program, with assistance from Oak Ridge National Laboratory and an advisory group of 40 weatherization professionals, program managers, and researchers. The evaluation is comprised of three impact studies covering the Program`s major market segments: Single-family homes, mobile homes, and dwellings in small (2 to 4-unit) multifamily buildings (the Single-Family Study), Single-family homes heated primarily with fuel oil (the Fuel-Oil Study), and Dwellings in buildings with five or more units (the Multifamily Study). The Single-Family Study, the subject of this report, is a critical part of this coordinated evaluation effort. Its focus on single-family dwellings, mobile homes, and dwellings in small multifamily buildings covers 83% of the income-eligible population and 96% of the dwellings weatherized during Program Year 1989. The first phase of the Single-Family Study involved the analysis of a massive data base of information collected from 368 local weatherization agencies and 543 electric and gas utilities. This analysis resulted in energy-saving and cost-effectiveness estimates for the Weatherization Program and the identification of a set of ten high-performing agencies located throughout the country. The second phase, which is the subject of this report, involves a ``process`` evaluation of these ten high performers, aimed at identifying those weatherization practices that explain their documented success.

  11. Energy Department Releases Case Studies and Best Practices to Assist Innovative Energy Efficiency Programs

    Energy.gov [DOE]

    The U.S. Department of Energy (DOE) today announced new case studies and other online resources available to local governments that are designing, expanding, and enabling residential energy efficiency programs across the country.

  12. Better Buildings Alliance, adidas Case Study: adidas Saves Energy and Costs with Planned RTU Replacement Program (Fact Sheet)

    SciTech Connect

    Not Available

    2014-09-01

    Case study describing how adidas implemented a best practice of a planned replacement program for its RTUs.

  13. The Case for a 500 GeV e{sup +}e{sub {minus}} Linear Collider

    SciTech Connect

    Peskin, Michael E

    2000-07-12

    Several proposals are being developed around the world for an e{sup +}e{sub {minus}} linear collider with an initial center of mass energy of 500 GeV. In this paper, the authors discuss why a project of this type deserves priority as the next major initiative in high energy physics.

  14. Linear phase compressive filter

    DOEpatents

    McEwan, Thomas E.

    1995-01-01

    A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line.

  15. Linear phase compressive filter

    DOEpatents

    McEwan, T.E.

    1995-06-06

    A phase linear filter for soliton suppression is in the form of a laddered series of stages of non-commensurate low pass filters with each low pass filter having a series coupled inductance (L) and a reverse biased, voltage dependent varactor diode, to ground which acts as a variable capacitance (C). L and C values are set to levels which correspond to a linear or conventional phase linear filter. Inductance is mapped directly from that of an equivalent nonlinear transmission line and capacitance is mapped from the linear case using a large signal equivalent of a nonlinear transmission line. 2 figs.

  16. Independent Oversight Inspection, Stanford Linear Accelerator...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Safety, and Health Programs at the Stanford Linear Accelerator Center This report provides the results of an inspection of the environment, safety, and health programs at the ...

  17. LINEAR ACCELERATOR

    DOEpatents

    Christofilos, N.C.; Polk, I.J.

    1959-02-17

    Improvements in linear particle accelerators are described. A drift tube system for a linear ion accelerator reduces gap capacity between adjacent drift tube ends. This is accomplished by reducing the ratio of the diameter of the drift tube to the diameter of the resonant cavity. Concentration of magnetic field intensity at the longitudinal midpoint of the external sunface of each drift tube is reduced by increasing the external drift tube diameter at the longitudinal center region.

  18. Evolution of Energy Efficiency Programs Over Time: The Case of Standby Power

    SciTech Connect

    Payne, Christopher; Chung, Iris; Fisher, Emily

    2014-08-17

    Issued in 2001, Presidential Executive Order 13221 directed federal agencies to purchase products with low standby power, with the goal of 1) reducing energy consumption in federal facilities, and 2) drawing attention to the problem of high standby power consumption, with guidance provided by the Federal Energy Management Program (FEMP). At that time, standby power was newly recognized as an increasing building energy load. Since then, procurement of products with low standby power have been set in place in acquisition processes, and the purchasing power of the federal government continues to influence manufacturers design decisions related to standby power. In recent years, FEMP has shifted effort from direct manufacturer outreach for data collection, to integrating low standby requirement into broader acquisition programs including Energy Star and Electronic Product Environmental Assessment Tool (EPEAT). Another milestone has been the labeling of low standby products on the GSA Advantage website to simplify and enhance compliance. Looking forward into the program?s future, this question arises How do we design programs over time to reflect market and technology changes, by adjusting programmatic requirements while maintaining effectiveness? This paper discusses that question for the case of standby power, which transitioned from covering a single to multiple environmental attributes, both in the context of the program's past and future.

  19. The California Energy Commission's New Solar Homes Partnership Program Case Study: Promoting Greener, Better Housing in California

    Energy.gov [DOE]

    This case study analyzes data from the California Energy Commission's New Solar Homes Partnership Program, part of California's comprehensive statewide solar program, the California Solar Initiative. At the time this study was conducted, the New Solar Homes Partnership Program had installed 14,100 solar energy systems totaling 45 megawatts of capacity.

  20. Asynchronous Programming in UPC: A Case Study and Potential for Improvement

    SciTech Connect

    Shet, Aniruddha G; Tipparaju, Vinod; Harrison, Robert J

    2009-01-01

    In a traditional Partitioned Global Address Space language like UPC, an application programmer works with the model of a static set of threads performing locality-aware accesses on a global address space. On the other hand, asynchronous programming provides a simple interface for expressing the concurrency in dynamic, irregular algorithms, with the prospect of efficient portable execution from sophisticated runtime schemes handling the exposed concurrency. In this paper, we adopt the asynchronous style of programming to parallelize a nested, tree-based code in UPC. To maximize performance without losing the ease of application programming, we design Asynchronous Remote Methods as a potential extension to the UPC standard. Our prototype implementation of this construct in Berkeley UPC yields within 7% of ideal performance and 20-fold improvement over the original Standard UPC solution in some cases.

  1. Linear Accelerator

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Linear Accelerator (LINAC) The core of the LANSCE facility is one of the nation's most powerful proton linear accelerators or LINAC. The LINAC at LANSCE has served the nation since 1972, providing the beam current required by all the experimental areas that support NNSA-DP and other DOE missions. The LINAC's capability to reliably deliver beam current is the key to the LANSCE's ability to do research-and thus the key to meeting NNSA and DOE mission deliverables. The LANSCE Accelerator The LANSCE

  2. LINEAR ACCELERATOR

    DOEpatents

    Colgate, S.A.

    1958-05-27

    An improvement is presented in linear accelerators for charged particles with respect to the stable focusing of the particle beam. The improvement consists of providing a radial electric field transverse to the accelerating electric fields and angularly introducing the beam of particles in the field. The results of the foregoing is to achieve a beam which spirals about the axis of the acceleration path. The combination of the electric fields and angular motion of the particles cooperate to provide a stable and focused particle beam.

  3. Independent Oversight Inspection, Stanford Linear Accelerator Center -

    Office of Environmental Management (EM)

    January 2007 | Department of Energy Stanford Linear Accelerator Center - January 2007 Independent Oversight Inspection, Stanford Linear Accelerator Center - January 2007 January 2007 Inspection of Environment, Safety, and Health Programs at the Stanford Linear Accelerator Center This report provides the results of an inspection of the environment, safety, and health programs at the Department of Energy's (DOE) Stanford Linear Accelerator Center. The inspection was conducted during October

  4. DOE CALiPER Program, Report 21.2: Linear (T8) LED Lamp Performance in Five Types of Recessed Troffers

    SciTech Connect

    Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.; Wilkerson, Andrea M.; Beeson, Tracy A.

    2014-05-20

    Although lensed troffers are numerous, there are many other types of optical systems as well. This report looked at the performance of three linear (T8) LED lamps chosen primarily based on their luminous intensity distributions (narrow, medium, and wide beam angles) as well as a benchmark fluorescent lamp in five different troffer types. Also included are the results of a subjective evaluation. Results show that linear (T8) LED lamps can improve luminaire efficiency in K12-lensed and parabolic-louvered troffers, effect little change in volumetric and high-performance diffuse-lensed type luminaires, but reduce efficiency in recessed indirect troffers. These changes can be accompanied by visual appearance and visual comfort consequences, especially when LED lamps with clear lenses and narrow distributions are installed. Linear (T8) LED lamps with diffuse apertures exhibited wider beam angles, performed more similarly to fluorescent lamps, and received better ratings from observers. Guidance is provided on which luminaires are the best candidates for retrofitting with linear (T8) LED lamps.

  5. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Programming Compiling and linking programs on Euclid. Compiling Codes How to compile and link MPI codes on Euclid. Read More » Using the ACML Math Library How to compile and link a code with the ACML library and include the $ACML environment variable. Read More » Process Limits The hard and soft process limits are listed. Read More » Last edited: 2016-04-29 11:35:11

  6. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Programming The genepool system has a diverse set of software development tools and a rich environment for delivering their functionality to users. Genepool has adopted a modular system which has been adapted from the Programming Environments similar to those provided on the Cray systems at NERSC. The Programming Environment is managed by a meta-module named similar to "PrgEnv-gnu/4.6". The "gnu" indicates that it is providing the GNU environment, principally GCC,

  7. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics ... Each programming environment contains the full set of compatible compilers and libraries. ...

  8. From Minnesota to New Mexico, E85 Expands beyond the Corn Belt; State Energy Program (SEP) Case Studies

    SciTech Connect

    Not Available

    2004-04-01

    DOE's State Energy Program published this case study in conjunction with the New Mexico Division of Energy Conservation and Management. It describes an emerging corridor of service stations selling a specific alternative fuel-E85 ethanol-along highways in New Mexico.

  9. Positrons for linear colliders

    SciTech Connect

    Ecklund, S.

    1987-11-01

    The requirements of a positron source for a linear collider are briefly reviewed, followed by methods of positron production and production of photons by electromagnetic cascade showers. Cross sections for the electromagnetic cascade shower processes of positron-electron pair production and Compton scattering are compared. A program used for Monte Carlo analysis of electromagnetic cascades is briefly discussed, and positron distributions obtained from several runs of the program are discussed. Photons from synchrotron radiation and from channeling are also mentioned briefly, as well as positron collection, transverse focusing techniques, and longitudinal capture. Computer ray tracing is then briefly discussed, followed by space-charge effects and thermal heating and stress due to showers. (LEW)

  10. Huntington Veterans Affairs Medical Center - Faucet and Showerhead Replacement Project: Best Management Practice Case Study #7: Faucets and Showerheads, Federal Energy Management Program (FEMP) (Fact Sheet)

    SciTech Connect

    Not Available

    2009-12-01

    Case study overview of the Huntington Veterans Affairs Medical Center water efficiency program as part of FEMP's water efficiency best management practice series.

  11. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    using MPI and OpenMP on NERSC systems, the same does not always exist for other supported parallel programming models such as UPC or Chapel. At the same time, we know that these...

  12. Programming

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Programming Compiling Codes There are three compiler suites available on Carver: Portland Group (PGI), Intel, and GCC. The PGI compilers are the default, to provide compatibility with other NERSC platforms. Read More » Using MKL Intel's Math Kernel Library (MKL) is a library of highly optimized, extensively threaded math routines optimized for Intel processors. Core math functions include BLAS, LAPACK, ScaLAPACK, Sparse Solvers, Fast Fourier Transforms, Vector Math, and more. It is

  13. DOE’s New Cost-Effectiveness Tool Builds the Business Case for Program Administrators

    Energy.gov [DOE]

    In February, DOE released the beta version of a user-friendly tool that estimates the cost-effectiveness of a residential energy efficiency program based on a program administrator’s inputs. Public...

  14. Linear Collider Physics Resource Book Snowmass 2001

    SciTech Connect

    Ronan , M.T.

    2001-06-01

    built in a few years, it would make sense to wait for the results of each accelerator before planning the next one. Thus, we would wait for the results from the Tevatron before planning the LHC experiments, and wait for the LHC before planning any later stage. In reality accelerators require a long time to construct, and they require such specialized resources and human talent that delay can cripple what would be promising opportunities. In any event, we believe that the case for the linear collider is so compelling and robust that we can justify this facility on the basis of our current knowledge, even before the Tevatron and LHC experiments are done. The physics prospects for the linear collider have been studied intensively for more than a decade, and arguments for the importance of its experimental program have been developed from many different points of view. This book provides an introduction and a guide to this literature. We hope that it will allow physicists new to the consideration of linear collider physics to start from their own personal perspectives and develop their own assessments of the opportunities afforded by a linear collider.

  15. Existing Homes Retrofit Case Study: SMUD's 32nd Avenue Remodel Demonstration Program, Sacramento, CA

    SciTech Connect

    none,

    2011-03-01

    This case study describes a retrofit project between SMUD and Building America to create a high-performance home.

  16. Lifeline electric rates and alternative approaches to the problems of low-income ratepayers. Ten case studies of implemented programs

    SciTech Connect

    Not Available

    1980-07-01

    Program summaries, issue developments, governmental processes, and impacts are discussed for 10 case studies dealing with lifeline electric rates and alternative approaches to the problems of low-income ratepayers, namely; the Boston Edison rate freeze; the California lifeline; Florida Power and Light conservation rate; the Iowa-Illinois Gas and Electric small-use rate; the Maine demonstration lifeline program; the Massachusetts Electric Company A-65 rate; the Michigan optional senior citizen rate; the Narragansett Electric Company A-65 SSI rate; the Northern States Power Company conservation rate break; and the Potomac Electric Power Company rate freeze. (MCW)

  17. Modeling patterns in data using linear and related models

    SciTech Connect

    Engelhardt, M.E.

    1996-06-01

    This report considers the use of linear models for analyzing data related to reliability and safety issues of the type usually associated with nuclear power plants. The report discusses some of the general results of linear regression analysis, such as the model assumptions and properties of the estimators of the parameters. The results are motivated with examples of operational data. Results about the important case of a linear regression model with one covariate are covered in detail. This case includes analysis of time trends. The analysis is applied with two different sets of time trend data. Diagnostic procedures and tests for the adequacy of the model are discussed. Some related methods such as weighted regression and nonlinear models are also considered. A discussion of the general linear model is also included. Appendix A gives some basic SAS programs and outputs for some of the analyses discussed in the body of the report. Appendix B is a review of some of the matrix theoretic results which are useful in the development of linear models.

  18. Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Boise Inc. St. Helens mill produces nearly 1,000 tons of pulp and specialty paper per day, including a wide variety of light-to-heavy paper and napkin grade tissues. Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings Annual Energy Savings Exceed $1 Million Industrial Technologies Program Case Study Benefits * Achieved annual energy cost savings of more than $1 million * Achieved annual fuel savings of approximately 154,000 MMBtu * Revealed innovative method to save energy *

  19. Existing Homes Retrofit Case Study: SMUD's Jean Avenue Remodel Demonstration Program, Sacramento, CA

    SciTech Connect

    none,

    2011-03-01

    This case study describes how SMUD teamed with Building America partners to retrofit aging, foreclosed homes into high-performance homes.

  20. Fuelwood procurement for an industrial power plant: a case study of Dow Corning's program

    SciTech Connect

    Folger, A.G.; Sworden, P.G.; Bond, C.T.

    1984-08-01

    Dow Corning Corporation has developed effective procedures for meeting the fuelwood requirements of a 22.4 megawatt steam and electricity cogenerating power plant. The fuelwood procurement program of Dow Corning's Natural Resources Department involves special arrangements with private landowners, logging and hauling producers, and waste wood suppliers. The program's success is attributable to a favorable location, adequate allowance for advance planning, effective public relations, and flexible management. The program is significant because it demonstrates that industrial fuelwood requirements can be met and that improved production from nonindustrial private forests can be relied upon as a major source of fuelwood. 7 references, 7 figures.

  1. Linear induction accelerator parameter options

    SciTech Connect

    Birx, D.L.; Caporaso, G.J.; Reginato, L.L.

    1986-04-21

    The principal undertaking of the Beam Research Program over the past decade has been the investigation of propagating intense self-focused beams. Recently, the major activity of the program has shifted toward the investigation of converting high quality electron beams directly to laser radiation. During the early years of the program, accelerator development was directed toward the generation of very high current (>10 kA), high energy beams (>50 MeV). In its new mission, the program has shifted the emphasis toward the production of lower current beams (>3 kA) with high brightness (>10/sup 6/ A/(rad-cm)/sup 2/) at very high average power levels. In efforts to produce these intense beams, the state of the art of linear induction accelerators (LIA) has been advanced to the point of satisfying not only the current requirements but also future national needs.

  2. Federal Energy Management Program technical assistance case study: Water conservation at the Denver Federal Center

    SciTech Connect

    1997-01-01

    As part of a national effort, Executive Order 12902 and the Energy Policy Act of 1992 mandated water conservation in all Federal facilities. The US Department of Energy`s (DOE) Federal Energy Management Program (FEMP) was tasked with leading the effort providing the technical assistance needed to identify ways to comply with the order. To apply highly efficient water use technologies in the Federal sector, FEMP formed a partnership with DOE`s National Renewable Energy Laboratory (NREL); the General Services Administration (GSA); the Bureau of Reclamation; the Environmental Protection Agency (EPA); Denver Water, the local utility; and several manufacturers. The objectives of the partnership were: to improve energy and water efficiency in the Federal sector; to deploy US manufactured water technologies in the Federal sector; to reduce life-cycle cost and improve reliability of Federal installations; to establish a showcase site demonstrating technologies and operating practices of water conservation; to demonstrate effective government and industry partnerships. FEMP chose the 14-story Building 67 at the Denver Federal Center for the site of the water conservation project.

  3. New Whole-House Solutions Case Study: Northwest Energy Efficient Manufactured Housing Program High-Performance Test Homes - Pacific Northwest

    SciTech Connect

    2015-05-01

    This project represents the third phase of a multi-year effort to develop and bring to market a High Performance Manufactured Home (HPMH). In this project, the Northwest Energy Efficient Manufactured Housing Program worked with Building America Partnership for Improved Residential Construction and Bonneville Power Administration to help four factory homebuilders build prototype zero energy ready manufactured homes, resulting in what is expected to be a 30% savings relative to the Building America Benchmark. (The actual % savings varies depending on choice of heating equipment and climate zone). Previous phases of this project created a HPMH specification and prototyped individual measures from the package to obtain engineering approvals and develop preliminary factory construction processes. This case study describes the project team's work during 2014 to build prototype homes to the HPMH specifications and to monitor the homes for energy performance and durability. Monitoring is expected to continue into 2016.

  4. Fault tolerant linear actuator

    DOEpatents

    Tesar, Delbert

    2004-09-14

    In varying embodiments, the fault tolerant linear actuator of the present invention is a new and improved linear actuator with fault tolerance and positional control that may incorporate velocity summing, force summing, or a combination of the two. In one embodiment, the invention offers a velocity summing arrangement with a differential gear between two prime movers driving a cage, which then drives a linear spindle screw transmission. Other embodiments feature two prime movers driving separate linear spindle screw transmissions, one internal and one external, in a totally concentric and compact integrated module.

  5. Snapshot: Linear Lamps (TLEDs)

    Energy.gov [DOE]

    A report using LED Lighting Facts data to examine the current state of the market for linear fluorescent lamps. (8 pages, July 2016)

  6. Focusing in Linear Accelerators

    DOE R&D Accomplishments

    McMillan, E. M.

    1950-08-24

    Review of the theory of focusing in linear accelerators with comments on the incompatibility of phase stability and first-order focusing in a simple accelerator.

  7. The case for unified linear reference system

    SciTech Connect

    Espinoza, J. Jr.; Mackoy, R.D.; Fletcher, D.R.

    1997-06-01

    The transportation industry distinguishes its activities and data into three functionally and institutionally distinct domains. Transportation infrastructure management activities make transport links (e.g., roads, rail lines, transit routes) available for travel. In contrast, civilian and military transport operations focus on finding and using the best transport links. Each of these three transportation interest groups - transportation facility operators, civilian and military transportation users - currently collects and maintains separate, often redundant or inconsistent information concerning the location and status of the transportation system, the vehicles using the system, and the passengers and freight (or material) being conveyed. Although there has been some progress made in integrating data within each domain, little emphasis has been placed on identifying and improving the flow of information between them. Because activities initiated in one domain affect conditions in the others, defining these flows is crucial to the next generation of planners, traffic managers and customers of transportation services. For example, construction and maintenance activities affect civilian and military route choices and travel times; large scale military movements disrupt civilian travel and have potentially major effects on the infrastructure and so on. This intertwined interest in the transportation system implies the need for data integration not only within each sphere of interest but among the spheres as well. Although recent policy statements by the U.S. Departments of Transportation and Defense and ITS America indicate a desire to combine and share information resources, there are enormous technical and institutional barriers that need to be overcome.

  8. Linearly polarized fiber amplifier

    DOEpatents

    Kliner, Dahv A.; Koplow, Jeffery P.

    2004-11-30

    Optically pumped rare-earth-doped polarizing fibers exhibit significantly higher gain for one linear polarization state than for the orthogonal state. Such a fiber can be used to construct a single-polarization fiber laser, amplifier, or amplified-spontaneous-emission (ASE) source without the need for additional optical components to obtain stable, linearly polarized operation.

  9. The Milling Assistant, Case-Based Reasoning, and machining strategy: A report on the development of automated numerical control programming systems at New Mexico State University

    SciTech Connect

    Burd, W.; Culler, D.; Eskridge, T.; Cox, L.; Slater, T.

    1993-08-01

    The Milling Assistant (MA) programming system demonstrates the automated development of tool paths for Numerical Control (NC) machine tools. By integrating a Case-Based Reasoning decision processor with a commercial CAD/CAM software, intelligent tool path files for milled and point-to-point features can be created. The operational system is capable of reducing the time required to program a variety of parts and improving product quality by collecting and utilizing ``best of practice`` machining strategies.

  10. Existing Whole-House Solutions Case Study: Applying Best Practices to Florida Local Government Retrofit Programs - Central Florida

    SciTech Connect

    2014-03-01

    In some communities, local government and non-profit entities have funds to purchase and renovate distressed, foreclosed homes for resale in the affordable housing market. Numerous opportunities to improve whole house energy efficiency are inherent in these comprehensive renovations. BA-PIRC worked together in a multiyear field study making recommendations in individual homes, meanwhile compiling improvement costs, projected energy savings, practical challenges, and labor force factors surrounding common energy-related renovation measures. The field study, Phase 1 of this research, resulted in a set of best practices appropriate to the current labor pool and market conditions in central Florida to achieve projected annual energy savings of 15%-30% and higher. This case study describes Phase 2 of the work where researchers worked with a local government partner to implement and refine the "current best practices". A simulation study was conducted to characterize savings potential under three sets of conditions representing varying replacement needs for energy-related equipment and envelope components. The three scenarios apply readily to the general remodeling industry as for renovation of foreclosed homes for the affordable housing market. The new local government partner, the City of Melbourne, implemented the best practices in a community-scale renovation program that included ten homes in 2012.

  11. PC Basic Linear Algebra Subroutines

    Energy Science and Technology Software Center

    1992-03-09

    PC-BLAS is a highly optimized version of the Basic Linear Algebra Subprograms (BLAS), a standardized set of thirty-eight routines that perform low-level operations on vectors of numbers in single and double-precision real and complex arithmetic. Routines are included to find the index of the largest component of a vector, apply a Givens or modified Givens rotation, multiply a vector by a constant, determine the Euclidean length, perform a dot product, swap and copy vectors, andmore » find the norm of a vector. The BLAS have been carefully written to minimize numerical problems such as loss of precision and underflow and are designed so that the computation is independent of the interface with the calling program. This independence is achieved through judicious use of Assembly language macros. Interfaces are provided for Lahey Fortran 77, Microsoft Fortran 77, and Ryan-McFarland IBM Professional Fortran.« less

  12. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    SciTech Connect

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  13. Combustion powered linear actuator

    DOEpatents

    Fischer, Gary J.

    2007-09-04

    The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

  14. Linear induction accelerator

    SciTech Connect

    Bosamykin, V.S.; Pavlovskiy, A.I.

    1984-03-01

    A linear induction accelerator of charged particles, containing inductors and an acceleration circuit, characterized by the fact that, for the purpose of increasing the power of the accelerator, each inductor is made in the form of a toroidal line with distributed parameters, from one end of which in the gap of the line a ring commutator is included, and from the other end of the ine a resistor is hooked up, is described.

  15. Linear induction accelerator

    DOEpatents

    Buttram, M.T.; Ginn, J.W.

    1988-06-21

    A linear induction accelerator includes a plurality of adder cavities arranged in a series and provided in a structure which is evacuated so that a vacuum inductance is provided between each adder cavity and the structure. An energy storage system for the adder cavities includes a pulsed current source and a respective plurality of bipolar converting networks connected thereto. The bipolar high-voltage, high-repetition-rate square pulse train sets and resets the cavities. 4 figs.

  16. Programming on Franklin

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programming Programming on Franklin Compiling Codes on Franklin Cray provides a convenient set of wrapper commands which should be used in almost all cases for compiling and...

  17. The Stanford Linear Collider

    SciTech Connect

    Emma, P.

    1995-06-01

    The Stanford Linear Collider (SLC) is the first and only high-energy e{sup +}e{sup {minus}} linear collider in the world. Its most remarkable features are high intensity, submicron sized, polarized (e{sup {minus}}) beams at a single interaction point. The main challenges posed by these unique characteristics include machine-wide emittance preservation, consistent high intensity operation, polarized electron production and transport, and the achievement of a high degree of beam stability on all time scales. In addition to serving as an important machine for the study of Z{sup 0} boson production and decay using polarized beams, the SLC is also an indispensable source of hands-on experience for future linear colliders. Each new year of operation has been highlighted with a marked improvement in performance. The most significant improvements for the 1994-95 run include new low impedance vacuum chambers for the damping rings, an upgrade to the optics and diagnostics of the final focus systems, and a higher degree of polarization from the electron source. As a result, the average luminosity has nearly doubled over the previous year with peaks approaching 10{sup 30} cm{sup {minus}2}s{sup {minus}1} and an 80% electron polarization at the interaction point. These developments as well as the remaining identifiable performance limitations will be discussed.

  18. Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

    SciTech Connect

    Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P.

    1996-12-01

    This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising.

  19. Assessment of Financial Savings from Peer Reviews of In-Progress Projects: A Case Study from the Department of Energy's Hydrogen Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Assessment of Financial Savings From Peer Reviews of In-Progress Projects: A Case Study from the Department of Energy's Hydrogen Program Prepared By: Yaw O. Agyeman, TMS, Inc. with Jeff Dowd, DOE Office of Energy Efficiency & Renewable Energy Prepared for the Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy October 2008 Acknowledgments: Special thanks go to the following people who provided inputs to the study or review comments on an earlier draft of this paper. *

  20. Chrysler: Save Energy Now Assessment Enables a Vehicle Assembly Complex to Achieve Significant Natural Gas Savings; Industrial Technologies Program (ITP) Save Energy Now Case Study.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    powerhouse at Chrysler's St. Louis Assembly Complex provides steam, chilled water, and compressed air to both the north and south plants. Chrysler: Save Energy Now Assessment Enables a Vehicle Assembly Complex to Achieve Significant Natural Gas Savings Industrial Technologies Program Case Study Benefits * Achieves annual energy savings of $627,000 * Achieves annual natural gas savings of more than 70,000 MMBtu * Yields a simple payback of just over 2 months Key Findings * Independent evaluations

  1. Largest Producer of Steel Products in the United States Achieves Significant Energy Savings at its Minntac Plant; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Located at Mt. Iron on the Mesabi Iron Range in northern Minnesota, the U. S. Steel Minntac plant produces approxi- mately 14.5 million tons of taconite pellets annually. Largest Producer of Steel Products in the United States Achieves Significant Energy Savings at its Minntac Plant U. S. Steel's Taconite Pellet Manufacturing Facility Improves Process Heating Efficiency and Rejuvenates Energy Savings Strategy Following Save Energy Now Assessment Industrial Technologies Program Case Study

  2. Steam System Efficiency Optimized After J.R. Simplot Fertilizer Plant Receives Energy Assessment; Industrial Technologies Program (ITP) Save Energy Now (SEN) Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    J.R. Simplot Don plant in Pocatello, Idaho, repaired boiler feed water pumps such as the one pictured above, and revised boiler operating practices to reduce steam venting by 17 million pounds annually. Steam System Efficiency Optimized After J.R. Simplot Fertilizer Plant Receives Energy Assessment Industrial Technologies Program Case Study Key Findings * Significant energy savings can be achieved without large capital expenditures. * While the J.R. Simplot company had an active energy

  3. Goodyear Tire Plant Gains Traction on Energy Savings After Completing Save Energy Now Assessment; Industrial Technologies Program (ITP) Save Energy Now Case Study (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Goodyear operates more than 60 facilities in 26 countries, including the Union City, Tennessee, plant pictured above. Goodyear Tire Plant Gains Traction on Energy Savings After Completing Save Energy Now Assessment Saves $875,000 in Energy Costs; Reduces Natural Gas Consumption Industrial Technologies Program Case Study Benefits * Implemented approximately $875,000 in annual energy cost savings * Achieves annual natural gas savings of more than 93,000 MMBtu * Reduces No. 6 fuel oil consumption

  4. About the User Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    . All proposals are reviewed for scientific merit by the Program Advisory Committee (PAC). In the case of proprietary proposals, such as the case for Industry, users pay for...

  5. Energy Assessments under the Top 10,000 Program - A Case Study for a Steel Mill in China

    SciTech Connect

    Lu, Hongyou; Price, Lynn; Nimbalkar, Sachin U; Thekdi, Arvind; Degroot, Matthew; Shi, Jun

    2014-01-01

    One of the largest energy-savings programs for the Chinese industrial sector was the Top-1,000 Program, which targeted the 1,000 largest industrial enterprises in China. This program was launched in 2006, implemented through 2010, and covered 33% of national energy usage. Because of the success of the Top-1000 initiative, the program has now been expanded to the Top-10,000 program in the 12th Five-Year Plan period (2011-2015). The Top-10,000 program covers roughly 15,000 industrial enterprises, or about two-thirds of China s total energy consumption. Implementing energy audit systems and conducting industrial energy efficiency assessments are key requirements of the Top-10,000 program. Previous research done by Lawrence Berkeley National Laboratory (LBNL) has shown that there is a significant potential for improvement in energy assessment practices and applications in China. Issues such as lack of long term policy mechanisms, insufficient motivation for industrial enterprises, limited technical scope of energy assessments, and lack of systematic standardization have been identified. Through the support of the U.S. Department of Energy (DOE) and the U.S. State Department (with additional co-funding from the Energy Foundation China), LBNL, Oak Ridge National Laboratory, the Institute for Sustainable Communities (ISC), and DOE Energy Experts worked collaboratively with Chinese local organizations and conducted a series of industrial energy efficiency assessment demonstrations in selected Chinese industrial plants. The project aimed to not only introduce standardized methodologies and tools for energy assessments, but also to bring the systems approach for energy system analysis to the Top 10,000 enterprises. Through the project, five energy system assessments were conducted, and more than 300 Chinese experts from local energy conservation centers, universities, research organizations, energy service companies, and plant engineers were trained. This paper begins by

  6. New Whole-House Solutions Case Study: Meeting DOE Challenge Home Program Certification - Chicago, IL; Denver, CO; Devens, MA

    SciTech Connect

    2015-01-01

    In this project, three production home builders—K. Hovnanian Homes, David Weekley Homes, and Transformations, Inc.—partnered with Building America team Building Science Corporation to evaluate the certification of five test homes to the new DOE Challenge Home program performance standard (now DOE Zero Energy Ready Home program). The builders identified key benefits and barriers that impacted the certification of the test homes, and the likelihood of whether DOE Challenge Home certification would be pursued in future homes

  7. Linear Fresnel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Concentrating Solar Power » Linear Fresnel Linear Fresnel DOE funds solar research and development (R&D) in linear Fresnel systems as one of four CSP technologies aiming to meet the goals of the SunShot Initiative. Linear Fresnel systems, which are a type of linear concentrator, are active in Germany, Spain, Australia, India, and the United States. The SunShot Initiative funds R&D on linear Fresnel systems and related aspects within the industry, national laboratories and universities

  8. Non Linear Conjugate Gradient

    Energy Science and Technology Software Center

    2006-11-17

    Software that simulates and inverts electromagnetic field data for subsurface electrical properties (electrical conductivity) of geological media. The software treats data produced by a time harmonic source field excitation arising from the following antenna geometery: loops and grounded bipoles, as well as point electric and magnetic dioples. The inversion process is carried out using a non-linear conjugate gradient optimization scheme, which minimizes the misfit between field data and model data using a least squares criteria.more » The software is an upgrade from the code NLCGCS_MP ver 1.0. The upgrade includes the following components: Incorporation of new 1 D field sourcing routines to more accurately simulate the 3D electromagnetic field for arbitrary geologic& media, treatment for generalized finite length transmitting antenna geometry (antennas with vertical and horizontal component directions). In addition, the software has been upgraded to treat transverse anisotropy in electrical conductivity.« less

  9. HEAVY ION LINEAR ACCELERATOR

    DOEpatents

    Van Atta, C.M.; Beringer, R.; Smith, L.

    1959-01-01

    A linear accelerator of heavy ions is described. The basic contributions of the invention consist of a method and apparatus for obtaining high energy particles of an element with an increased charge-to-mass ratio. The method comprises the steps of ionizing the atoms of an element, accelerating the resultant ions to an energy substantially equal to one Mev per nucleon, stripping orbital electrons from the accelerated ions by passing the ions through a curtain of elemental vapor disposed transversely of the path of the ions to provide a second charge-to-mass ratio, and finally accelerating the resultant stripped ions to a final energy of at least ten Mev per nucleon.

  10. Customer response to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York

    SciTech Connect

    Goldman, C.; Hopper, N.; Sezgen, O.; Moezzi, M.; Bharvirkar, R.; Neenan, B.; Boisvert, R.; Cappers, P.; Pratt, D.

    2004-07-01

    There is growing interest in policies, programs and tariffs that encourage customer loads to provide demand response (DR) to help discipline wholesale electricity markets. Proposals at the retail level range from eliminating fixed rate tariffs as the default service for some or all customer groups to reinstituting utility-sponsored load management programs with market-based inducements to curtail. Alternative rate designs include time-of-use (TOU), day-ahead real-time pricing (RTP), critical peak pricing, and even pricing usage at real-time market balancing prices. Some Independent System Operators (ISOs) have implemented their own DR programs whereby load curtailment capabilities are treated as a system resource and are paid an equivalent value. The resulting load reductions from these tariffs and programs provide a variety of benefits, including limiting the ability of suppliers to increase spot and long-term market-clearing prices above competitive levels (Neenan et al., 2002; Boren stein, 2002; Ruff, 2002). Unfortunately, there is little information in the public domain to characterize and quantify how customers actually respond to these alternative dynamic pricing schemes. A few empirical studies of large customer RTP response have shown modest results for most customers, with a few very price-responsive customers providing most of the aggregate response (Herriges et al., 1993; Schwarz et al., 2002). However, these studies examined response to voluntary, two-part RTP programs implemented by utilities in states without retail competition.1 Furthermore, the researchers had limited information on customer characteristics so they were unable to identify the drivers to price response. In the absence of a compelling characterization of why customers join RTP programs and how they respond to prices, many initiatives to modernize retail electricity rates seem to be stymied.

  11. Benefits and Costs of Aggressive Energy Efficiency Programs and the Impacts of Alternative Sources of Funding: Case Study of Massachusetts

    SciTech Connect

    Cappers, Peter; Satchwell, Andrew; Goldman, Charles; Schlegel, Jeff

    2010-08-06

    Increased interest by state (and federal) policymakers and regulatory agencies in pursuing aggressive energy efficiency efforts could deliver significant utility bill savings for customers while having long-term implications for ratepayers (e.g. potential rate impacts). Equity and distributional concerns associated with the authorized recovery of energy efficiency program costs may necessitate the pursuit of alternative program funding approaches. In 2008, Massachusetts passed the Green Communities Act which directed its energy efficiency (EE) program administrators to obtain all cost-effective EE resources. This goal has translated into achieving annual electric energy savings equivalent to a 2.4% reduction in retail sales from energy efficiency programs in 2012. Representatives of electricity consumer groups supported the new portfolio of EE programs (and the projected bill savings) but raised concerns about the potential rate impacts associated with achieving such aggressive EE goals, leading policymakers to seek out alternative funding sources which can potentially mitigate these effects. Utility administrators have also raised concerns about under-recovery of fixed costs when aggressive energy efficiency programs are pursued and have proposed ratemaking policies (e.g. decoupling) and business models that better align the utility's financial interests with the state's energy efficiency public policy goals. Quantifying these concerns and identifying ways they can be addressed are crucial steps in gaining the support of major stakeholder groups - lessons that can apply to other states looking to significantly increase savings targets that can be achieved from their own ratepayer-funded energy efficiency programs. We use a pro-forma utility financial model to quantify the bill and rate impacts on electricity customers when very aggressive annual energy efficiency savings goals ({approx}2.4%) are achieved over the long-term and also assess the impact of different

  12. Winding for linear pump

    DOEpatents

    Kliman, G.B.; Brynsvold, G.V.; Jahns, T.M.

    1989-08-22

    A winding and method of winding for a submersible linear pump for pumping liquid sodium are disclosed. The pump includes a stator having a central cylindrical duct preferably vertically aligned. The central vertical duct is surrounded by a system of coils in slots. These slots are interleaved with magnetic flux conducting elements, these magnetic flux conducting elements forming a continuous magnetic field conduction path along the stator. The central duct has placed therein a cylindrical magnetic conducting core, this core having a cylindrical diameter less than the diameter of the cylindrical duct. The core once placed to the duct defines a cylindrical interstitial pumping volume of the pump. This cylindrical interstitial pumping volume preferably defines an inlet at the bottom of the pump, and an outlet at the top of the pump. Pump operation occurs by static windings in the outer stator sequentially conveying toroidal fields from the pump inlet at the bottom of the pump to the pump outlet at the top of the pump. The winding apparatus and method of winding disclosed uses multiple slots per pole per phase with parallel winding legs on each phase equal to or less than the number of slots per pole per phase. The slot sequence per pole per phase is chosen to equalize the variations in flux density of the pump sodium as it passes into the pump at the pump inlet with little or no flux and acquires magnetic flux in passage through the pump to the pump outlet. 4 figs.

  13. Winding for linear pump

    DOEpatents

    Kliman, Gerald B.; Brynsvold, Glen V.; Jahns, Thomas M.

    1989-01-01

    A winding and method of winding for a submersible linear pump for pumping liquid sodium is disclosed. The pump includes a stator having a central cylindrical duct preferably vertically aligned. The central vertical duct is surrounded by a system of coils in slots. These slots are interleaved with magnetic flux conducting elements, these magnetic flux conducting elements forming a continuous magnetic field conduction path along the stator. The central duct has placed therein a cylindrical magnetic conducting core, this core having a cylindrical diameter less than the diameter of the cylindrical duct. The core once placed to the duct defines a cylindrical interstitial pumping volume of the pump. This cylindrical interstitial pumping volume preferably defines an inlet at the bottom of the pump, and an outlet at the top of the pump. Pump operation occurs by static windings in the outer stator sequentially conveying toroidal fields from the pump inlet at the bottom of the pump to the pump outlet at the top of the pump. The winding apparatus and method of winding disclosed uses multiple slots per pole per phase with parallel winding legs on each phase equal to or less than the number of slots per pole per phase. The slot sequence per pole per phase is chosen to equalize the variations in flux density of the pump sodium as it passes into the pump at the pump inlet with little or no flux and acquires magnetic flux in passage through the pump to the pump outlet.

  14. Berkeley Proton Linear Accelerator

    DOE R&D Accomplishments

    Alvarez, L. W.; Bradner, H.; Franck, J.; Gordon, H.; Gow, J. D.; Marshall, L. C.; Oppenheimer, F. F.; Panofsky, W. K. H.; Richman, C.; Woodyard, J. R.

    1953-10-13

    A linear accelerator, which increases the energy of protons from a 4 Mev Van de Graaff injector, to a final energy of 31.5 Mev, has been constructed. The accelerator consists of a cavity 40 feet long and 39 inches in diameter, excited at resonance in a longitudinal electric mode with a radio-frequency power of about 2.2 x 10{sup 6} watts peak at 202.5 mc. Acceleration is made possible by the introduction of 46 axial "drift tubes" into the cavity, which is designed such that the particles traverse the distance between the centers of successive tubes in one cycle of the r.f. power. The protons are longitudinally stable as in the synchrotron, and are stabilized transversely by the action of converging fields produced by focusing grids. The electrical cavity is constructed like an inverted airplane fuselage and is supported in a vacuum tank. Power is supplied by 9 high powered oscillators fed from a pulse generator of the artificial transmission line type.

  15. Linear induction pump

    DOEpatents

    Meisner, John W.; Moore, Robert M.; Bienvenue, Louis L.

    1985-03-19

    Electromagnetic linear induction pump for liquid metal which includes a unitary pump duct. The duct comprises two substantially flat parallel spaced-apart wall members, one being located above the other and two parallel opposing side members interconnecting the wall members. Located within the duct are a plurality of web members interconnecting the wall members and extending parallel to the side members whereby the wall members, side members and web members define a plurality of fluid passageways, each of the fluid passageways having substantially the same cross-sectional flow area. Attached to an outer surface of each side member is an electrically conductive end bar for the passage of an induced current therethrough. A multi-phase, electrical stator is located adjacent each of the wall members. The duct, stators, and end bars are enclosed in a housing which is provided with an inlet and outlet in fluid communication with opposite ends of the fluid passageways in the pump duct. In accordance with a preferred embodiment, the inlet and outlet includes a transition means which provides for a transition from a round cross-sectional flow path to a substantially rectangular cross-sectional flow path defined by the pump duct.

  16. A generating set direct search augmented Lagrangian algorithm for optimization with a combination of general and linear constraints.

    SciTech Connect

    Lewis, Robert Michael (College of William and Mary, Williamsburg, VA); Torczon, Virginia Joanne (College of William and Mary, Williamsburg, VA); Kolda, Tamara Gibson

    2006-08-01

    We consider the solution of nonlinear programs in the case where derivatives of the objective function and nonlinear constraints are unavailable. To solve such problems, we propose an adaptation of a method due to Conn, Gould, Sartenaer, and Toint that proceeds by approximately minimizing a succession of linearly constrained augmented Lagrangians. Our modification is to use a derivative-free generating set direct search algorithm to solve the linearly constrained subproblems. The stopping criterion proposed by Conn, Gould, Sartenaer and Toint for the approximate solution of the subproblems requires explicit knowledge of derivatives. Such information is presumed absent in the generating set search method we employ. Instead, we show that stationarity results for linearly constrained generating set search methods provide a derivative-free stopping criterion, based on a step-length control parameter, that is sufficient to preserve the convergence properties of the original augmented Lagrangian algorithm.

  17. Rate Case Elements

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Proceeding Rate Information Residential Exchange Program Surplus Power Sales Reports Rate Case Elements BPA's rate cases are decided "on the record." That is, in making a decision...

  18. Asynchronous parallel generating set search for linearly-constrained optimization.

    SciTech Connect

    Lewis, Robert Michael; Griffin, Joshua D.; Kolda, Tamara Gibson

    2006-08-01

    Generating set search (GSS) is a family of direct search methods that encompasses generalized pattern search and related methods. We describe an algorithm for asynchronous linearly-constrained GSS, which has some complexities that make it different from both the asynchronous bound-constrained case as well as the synchronous linearly-constrained case. The algorithm has been implemented in the APPSPACK software framework and we present results from an extensive numerical study using CUTEr test problems. We discuss the results, both positive and negative, and conclude that GSS is a reliable method for solving small-to-medium sized linearly-constrained optimization problems without derivatives.

  19. Case history of implementation of conservation program in a multitude of diverse buildings in the metropolitan area

    SciTech Connect

    Khan, S.M.

    1982-06-01

    This paper outlines an energy conservation program undertaken by Jazco Corporation. Monitoring techniques were based on a calculated energy norm. Abnormalities, internal heat load, and switch-over temperature were also established. An actual physical audit verified the results. HVAC systems were found to be incompatible. Most boilers were derated. An electronic economizer cycle was installed. Occupied temperature setting, night temperature setback, dynamic load control, demand control, were all instrumented with savings. Microprocessor-based systems replaced main frame computers at a fraction of the cost. It was found that New York state lighting standards are good except where frequency of use is low.

  20. Building America Case Study: Meeting DOE Challenge Home Program Certification, Chicago, Illinois; Denver, Colorado; Devens, Massachusetts (Fact Sheet)

    SciTech Connect

    Not Available

    2014-12-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor. 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense Efficient Hot Water Distribution requirement.

  1. The TESLA superconducting linear collider

    SciTech Connect

    the TESLA Collaboration

    1997-03-01

    This paper summarizes the present status of the studies for a superconducting Linear Collider (TESLA). {copyright} {ital 1997 American Institute of Physics.}

  2. Innovative Business Cases for Energy Storage In a Restructured Electricity Marketplace, A Study for the DOE Energy Storage Systems Program

    SciTech Connect

    IANNUCCI, JOE; EYER, JIM; BUTLER, PAUL C.

    2003-02-01

    This report describes the second phase of a project entitled ''Innovative Business Cases for Energy Storage in a Restructured Electricity Marketplace''. During part one of the effort, nine ''Stretch Scenarios'' were identified. They represented innovative and potentially significant uses of electric energy storage. Based on their potential to significantly impact the overall energy marketplace, the five most compelling scenarios were identified. From these scenarios, five specific ''Storage Market Opportunities'' (SMOs) were chosen for an in-depth evaluation in this phase. The authors conclude that some combination of the Power Cost Volatility and the T&D Benefits SMOs would be the most compelling for further investigation. Specifically, a combination of benefits (energy, capacity, power quality and reliability enhancement) achievable using energy storage systems for high value T&D applications, in regions with high power cost volatility, makes storage very competitive for about 24 GW and 120 GWh during the years of 2001 and 2010.

  3. A program to develop the domestic natural gas industry in Indonesia: Case history of two World Bank projects

    SciTech Connect

    Klass, D.L. ); Khwaja, S. )

    1991-01-01

    Indonesia depends heavily on revenues from the export of LNG and oil, the availability of which appears to be decreasing. It is therefore making a strong effort to accelerate development of a domestic natural gas industry. A high priority has been given to the conversion of power plants and city gas systems, including local industries and commercial facilities, from liquid fuels to natural gas. This will release more oil for export, help to meet the objectives of Repelita V, and provide substantial environmental benefits. The World Bank recently provided loans to the Indonesian Government for two projects that are aimed at substituting natural gas for oil and manufactured gas in domestic markets. One project involves expansion of the gas distribution systems of Indonesia's natural gas utility (PGN) in three cities: Jakarta and Bogor in Java, and Medan in Sumatra. The project also includes training programs for PGN staff and an energy pricing policy study to be carried out by Indonesia's Ministry of Mines and Energy. The second project involves expansion of the supply of natural gas for Surabaya and twelve other towns in its vicinity in East Java, and further expansion of Medan's supply system. Technical assistance will be provided to enhance the skills ofPGN and the Ministry of Mines and Energy, and a Gas Technology Unit similar to the Institute of Gas Technology will be established at Indonesia's Research and Development Center for Oil and Gas (LEMIGAS) in Jakarta. 14 refs., 3 figs., 11 tabs.

  4. User Coupled Confirmation Drilling Program case study: City of Alamosa, Colorado, Alamosa No. 1 geothermal test well

    SciTech Connect

    Zeisloft, J.; Sibbett, B.S.

    1985-08-01

    A 7118 ft (2170 m) deep geothermal test well was drilled on the south edge of the city of Alamosa, Colorado as part of the Department of Energy's User Coupled Confirmation Drilling Program. The project was selected on the bases of a potential direct heat geothermal resource within the Rio Grande rift graben and resource users in Alamosa. The well site was selected on the hypothesis of a buried horst along which deep thermal fluids might be rising. In addition, there were city wells that were anomalous in temperature and the location was convenient to potential application. The Alamosa No. 1 penetrated 2000 ft (610 m) of fine clastic rocks over 4000 ft (1219 m) of volcaniclastic rock resting on precambrian crystalline rock at a depth of 6370 ft (1942 m). Due to poor hole conditions, geophysical logs were not run. The stabilized bottom hole temperature was 223/sup 0/F (106/sup 0/C) with a gradient of 2.6/sup 0/F/100 ft (47/sup 0/C/km). Limited testing indicated a very low production capacity. 16 refs., 6 figs.

  5. Linear Accelerator | Advanced Photon Source

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Linear Accelerator Producing brilliant x-ray beams at the APS begins with electrons emitted from a cathode heated to 1100 C. The electrons are accelerated by high-voltage...

  6. Acoustic emission linear pulse holography

    DOEpatents

    Collins, H.D.; Busse, L.J.; Lemon, D.K.

    1983-10-25

    This device relates to the concept of and means for performing Acoustic Emission Linear Pulse Holography, which combines the advantages of linear holographic imaging and Acoustic Emission into a single non-destructive inspection system. This unique system produces a chronological, linear holographic image of a flaw by utilizing the acoustic energy emitted during crack growth. The innovation is the concept of utilizing the crack-generated acoustic emission energy to generate a chronological series of images of a growing crack by applying linear, pulse holographic processing to the acoustic emission data. The process is implemented by placing on a structure an array of piezoelectric sensors (typically 16 or 32 of them) near the defect location. A reference sensor is placed between the defect and the array.

  7. Automating linear accelerator quality assurance

    SciTech Connect

    Eckhause, Tobias; Thorwarth, Ryan; Moran, Jean M.; Al-Hallaq, Hania; Farrey, Karl; Ritter, Timothy; DeMarco, John; Pawlicki, Todd; Kim, Gwe-Ya; Popple, Richard; Sharma, Vijeshwar; Park, SungYong; Perez, Mario; Booth, Jeremy T.

    2015-10-15

    Purpose: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. Methods: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. Results: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The

  8. Direct Probes of Linearly Polarized Gluons inside Unpolarized Hadrons

    SciTech Connect

    Boer, Daniel; Brodsky, Stanley J.; Mulders, Piet J.; Pisano, Cristian; /Cagliari U. /INFN, Cagliari

    2011-02-07

    We show that the unmeasured distribution of linearly polarized gluons inside unpolarized hadrons can be directly probed in jet or heavy quark pair production both in electron-hadron and hadron-hadron collisions. We present expressions for the simplest cos 2{phi} asymmetries and estimate their maximal value in the particular case of electron-hadron collisions. Measurements of the linearly polarized gluon distribution in the proton should be feasible in future EIC or LHeC experiments.

  9. Lease Financing Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Liabilities Financial Plan Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Residential Exchange Program Surplus Power Sales...

  10. Power Prepayment Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Overview Power Prepay Term Sheet Summary Request for Offers Prepayment Framework Business Case Model (Customer Prepay Impact Model) (updated 8202012) Instructions for...

  11. Voluntary Separation Programs

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    In such cases, the "census" data (regarding the ages and classifications of employees eligible to participate in the separation program and of employees not eligible to ...

  12. MineSeis - A MATLAB@ GUI Program to

    Office of Scientific and Technical Information (OSTI)

    i MineSeis - A MATLAB@ GUI Program to Calculate Synthetic Seismograms from a Linear, ... The program was written with MATLAB Graphical User Interface (GUI) technique ...

  13. Belos Block Linear Solvers Package

    Energy Science and Technology Software Center

    2004-03-01

    Belos is an extensible and interoperable framework for large-scale, iterative methods for solving systems of linear equations with multiple right-hand sides. The motivation for this framework is to provide a generic interface to a collection of algorithms for solving large-scale linear systems. Belos is interoperable because both the matrix and vectors are considered to be opaque objects--only knowledge of the matrix and vectors via elementary operations is necessary. An implementation of Balos is accomplished viamore » the use of interfaces. One of the goals of Belos is to allow the user flexibility in specifying the data representation for the matrix and vectors and so leverage any existing software investment. The algorithms that will be included in package are Krylov-based linear solvers, like Block GMRES (Generalized Minimal RESidual) and Block CG (Conjugate-Gradient).« less

  14. LINEAR COUNT-RATE METER

    DOEpatents

    Henry, J.J.

    1961-09-01

    A linear count-rate meter is designed to provide a highly linear output while receiving counting rates from one cycle per second to 100,000 cycles per second. Input pulses enter a linear discriminator and then are fed to a trigger circuit which produces positive pulses of uniform width and amplitude. The trigger circuit is connected to a one-shot multivibrator. The multivibrator output pulses have a selected width. Feedback means are provided for preventing transistor saturation in the multivibrator which improves the rise and decay times of the output pulses. The multivibrator is connected to a diode-switched, constant current metering circuit. A selected constant current is switched to an averaging circuit for each pulse received, and for a time determined by the received pulse width. The average output meter current is proportional to the product of the counting rate, the constant current, and the multivibrator output pulse width.

  15. General Purpose Unfolding Program with Linear and Nonlinear Regularizations.

    Energy Science and Technology Software Center

    1987-05-07

    Version 00 The interpretation of several physical measurements requires the unfolding or deconvolution of the solution of Fredholm integral equations of the first kind. Examples include neutron spectroscopy with activation detectors, moderating spheres, or proton recoil measurements. LOUHI82 is designed to be applicable to a large number of physical problems and to be extended to incorporate other unfolding methods.

  16. Linear Corrugating - Final Technical Report

    SciTech Connect

    Lloyd Chapman

    2000-05-23

    Linear Corrugating is a process for the manufacture of corrugated containers in which the flutes of the corrugated medium are oriented in the Machine Direction (MD) of the several layers of paper used. Conversely, in the conventional corrugating process the flutes are oriented at right angles to the MD in the Cross Machine Direction (CD). Paper is stronger in MD than in CD. Therefore, boxes made using the Linear Corrugating process are significantly stronger-in the prime strength criteria, Box Compression Test (BCT) than boxes made conventionally. This means that using Linear Corrugating boxes can be manufactured to BCT equaling conventional boxes but containing 30% less fiber. The corrugated container industry is a large part of the U.S. economy, producing over 40 million tons annually. For such a large industry, the potential savings of Linear Corrugating are enormous. The grant for this project covered three phases in the development of the Linear Corrugating process: (1) Production and evaluation of corrugated boxes on commercial equipment to verify that boxes so manufactured would have enhanced BCT as proposed in the application; (2) Production and evaluation of corrugated boxes made on laboratory equipment using combined board from (1) above but having dual manufactures joints (glue joints). This box manufacturing method (Dual Joint) is proposed to overcome box perimeter limitations of the Linear Corrugating process; (3) Design, Construction, Operation and Evaluation of an engineering prototype machine to form flutes in corrugating medium in the MD of the paper. This operation is the central requirement of the Linear Corrugating process. Items I and II were successfully completed, showing predicted BCT increases from the Linear Corrugated boxes and significant strength improvement in the Dual Joint boxes. The Former was constructed and operated successfully using kraft linerboard as the forming medium. It was found that tensile strength and stretch

  17. Linear Fresnel Power Plant Illustration

    Energy.gov [DOE]

    With this concentrating solar power (CSP) graphic, flat or slightly curved mirrors mounted on trackers on the ground are configured to reflect sunlight onto a receiver tube fixed in space above these mirrors. A small parabolic mirror is sometimes added atop the receiver to further focus the sunlight. Linear CSP collectors capture the sun's energy with large mirrors that reflect and focus the sunlight onto a linear receiver tube. The receiver contains a fluid that is heated by the sunlight and then used to create superheated steam that spins a turbine that drives a generator to produce electricity.

  18. Linear electric field mass spectrometry

    DOEpatents

    McComas, D.J.; Nordholt, J.E.

    1992-12-01

    A mass spectrometer and methods for mass spectrometry are described. The apparatus is compact and of low weight and has a low power requirement, making it suitable for use on a space satellite and as a portable detector for the presence of substances. High mass resolution measurements are made by timing ions moving through a gridless cylindrically symmetric linear electric field. 8 figs.

  19. Linear electric field mass spectrometry

    DOEpatents

    McComas, David J.; Nordholt, Jane E.

    1992-01-01

    A mass spectrometer and methods for mass spectrometry. The apparatus is compact and of low weight and has a low power requirement, making it suitable for use on a space satellite and as a portable detector for the presence of substances. High mass resolution measurements are made by timing ions moving through a gridless cylindrically symmetric linear electric field.

  20. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    International Linear Collider Technical Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume ...

  1. Cast dielectric composite linear accelerator

    DOEpatents

    Sanders, David M.; Sampayan, Stephen; Slenes, Kirk; Stoller, H. M.

    2009-11-10

    A linear accelerator having cast dielectric composite layers integrally formed with conductor electrodes in a solventless fabrication process, with the cast dielectric composite preferably having a nanoparticle filler in an organic polymer such as a thermosetting resin. By incorporating this cast dielectric composite the dielectric constant of critical insulating layers of the transmission lines of the accelerator are increased while simultaneously maintaining high dielectric strengths for the accelerator.

  2. Segmented rail linear induction motor

    DOEpatents

    Cowan, M. Jr.; Marder, B.M.

    1996-09-03

    A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces. 6 figs.

  3. Segmented rail linear induction motor

    DOEpatents

    Cowan, Jr., Maynard; Marder, Barry M.

    1996-01-01

    A segmented rail linear induction motor has a segmented rail consisting of a plurality of nonferrous electrically conductive segments aligned along a guideway. The motor further includes a carriage including at least one pair of opposed coils fastened to the carriage for moving the carriage. A power source applies an electric current to the coils to induce currents in the conductive surfaces to repel the coils from adjacent edges of the conductive surfaces.

  4. Precision linear ramp function generator

    DOEpatents

    Jatko, W. Bruce (Knoxville, TN); McNeilly, David R. (Maryville, TN); Thacker, Louis H. (Knoxville, TN)

    1986-01-01

    A ramp function generator is provided which produces a precise linear ramp unction which is repeatable and highly stable. A derivative feedback loop is used to stabilize the output of an integrator in the forward loop and control the ramp rate. The ramp may be started from a selected baseline voltage level and the desired ramp rate is selected by applying an appropriate constant voltage to the input of the integrator.

  5. Precision linear ramp function generator

    DOEpatents

    Jatko, W.B.; McNeilly, D.R.; Thacker, L.H.

    1984-08-01

    A ramp function generator is provided which produces a precise linear ramp function which is repeatable and highly stable. A derivative feedback loop is used to stabilize the output of an integrator in the forward loop and control the ramp rate. The ramp may be started from a selected baseline voltage level and the desired ramp rate is selected by applying an appropriate constant voltage to the input of the integrator.

  6. Linearity Testing of Photovoltaic Cells

    SciTech Connect

    Emery, K.; Winter, S.; Pinegar, S.; Nalley, D.

    2006-01-01

    Photovoltaic devices are rated in terms of their peak power with respect to a specific spectrum, total irradiance, and temperature. To rate photovoltaic devices, a reference detector is required whose response is linear with total irradiance. This paper describes a procedure to determine the linearity of the short-circuit current (I{sub sc}) versus the total irradiance (E{sub tot}) by illuminating a reference cell with two lamps. A device is linear if the current measured with both lamps illuminating the cell is the same as the sum of the currents with each lamp illuminating the cell. The two-lamp method is insensitive to the light spectra or spatial nonuniformity changing with irradiance. The two-lamp method is rapid, easy to implement, and does not require operator intervention to change the irradiances. The presence of room light only limits the lowest irradiance that can be evaluated. Unlike other methods, the two-lamp method does not allow the current to be corrected for nonlinear effects.

  7. Linear Thermite Charge - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Linear Thermite Charge Battelle Memorial Institute Contact BMI About This Technology Publications: PDF Document Publication Linear Thermite Charge Picture (40 KB) PDF Document Publication Linear Thermite Charge Patent (207 KB) Technology Marketing Summary The Linear Thermite Charge (LTC) is designed to rapidly cut through concrete and steel structural components by using extremely high temperature thermite reactions jetted through a linear nozzle. Description Broadly, the invention provides for

  8. CALiPER Snapshot Linear Lamps (TLEDs)

    Energy Saver

    BUILDING TECHNOLOGIES OFFICE Snapshot Linear Lamps (TLEDs) Linear fluorescent lamps-and the "troffers" in which they are often used-are a staple of ambient lighting in offices, classrooms, and other types of commercial spaces. They are energy-efficient, long-lived, and relatively inexpensive. Linear LED lamps, often called TLEDs, are an alternative to linear fluorescent lamps and are mainly used in retrofit situations. Typically drawing about 60% of the power of linear fluorescent

  9. Assessment of financial savings from peer reviews of in-progress projects: A case study from the Department of Energy's Hydrogen Program

    SciTech Connect

    Agyeman, Yaw O.; Dowd, Jeff

    2008-10-01

    Results of a study to assess the financial savings to the Department of Energy’s (DOE) Hydrogen Program due to decisions made from peer reviews.

  10. When linear stability does not exclude nonlinear instability

    SciTech Connect

    Kevrekidis, P. G.; Pelinovsky, D. E.; Saxena, A.

    2015-05-29

    We describe a mechanism that results in the nonlinear instability of stationary states even in the case where the stationary states are linearly stable. In this study, this instability is due to the nonlinearity-induced coupling of the linearization’s internal modes of negative energy with the continuous spectrum. In a broad class of nonlinear Schrödinger equations considered, the presence of such internal modes guarantees the nonlinear instability of the stationary states in the evolution dynamics. To corroborate this idea, we explore three prototypical case examples: (a) an antisymmetric soliton in a double-well potential, (b) a twisted localized mode in a one-dimensional lattice with cubic nonlinearity, and (c) a discrete vortex in a two-dimensional saturable lattice. In all cases, we observe a weak nonlinear instability, despite the linear stability of the respective states.

  11. When linear stability does not exclude nonlinear instability

    DOE PAGES [OSTI]

    Kevrekidis, P. G.; Pelinovsky, D. E.; Saxena, A.

    2015-05-29

    We describe a mechanism that results in the nonlinear instability of stationary states even in the case where the stationary states are linearly stable. In this study, this instability is due to the nonlinearity-induced coupling of the linearization’s internal modes of negative energy with the continuous spectrum. In a broad class of nonlinear Schrödinger equations considered, the presence of such internal modes guarantees the nonlinear instability of the stationary states in the evolution dynamics. To corroborate this idea, we explore three prototypical case examples: (a) an antisymmetric soliton in a double-well potential, (b) a twisted localized mode in a one-dimensionalmore » lattice with cubic nonlinearity, and (c) a discrete vortex in a two-dimensional saturable lattice. In all cases, we observe a weak nonlinear instability, despite the linear stability of the respective states.« less

  12. HEATKAU Program.

    Energy Science and Technology Software Center

    2013-07-24

    Version 00 Calculations of the decay heat is of great importance for the design of the shielding of discharged fuel, the design and transport of fuel-storage flasks and the management of the resulting radioactive waste. These are relevant to safety and have large economic and legislative consequences. In the HEATKAU code, a new approach has been proposed to evaluate the decay heat power after a fission burst of a fissile nuclide for short cooling time.more » This method is based on the numerical solution of coupled linear differential equations that describe decays and buildups of the minor fission products (MFPs) nuclides. HEATKAU is written entirely in the MATLAB programming environment. The MATLAB data can be stored in a standard, fast and easy-access, platform- independent binary format which is easy to visualize.« less

  13. Nonferromagnetic linear variable differential transformer

    DOEpatents

    Ellis, James F.; Walstrom, Peter L.

    1977-06-14

    A nonferromagnetic linear variable differential transformer for accurately measuring mechanical displacements in the presence of high magnetic fields is provided. The device utilizes a movable primary coil inside a fixed secondary coil that consists of two series-opposed windings. Operation is such that the secondary output voltage is maintained in phase (depending on polarity) with the primary voltage. The transducer is well-suited to long cable runs and is useful for measuring small displacements in the presence of high or alternating magnetic fields.

  14. Acoustic emission linear pulse holography

    DOEpatents

    Collins, H. Dale; Busse, Lawrence J.; Lemon, Douglas K.

    1985-01-01

    Defects in a structure are imaged as they propagate, using their emitted acoustic energy as a monitored source. Short bursts of acoustic energy propagate through the structure to a discrete element receiver array. A reference timing transducer located between the array and the inspection zone initiates a series of time-of-flight measurements. A resulting series of time-of-flight measurements are then treated as aperture data and are transferred to a computer for reconstruction of a synthetic linear holographic image. The images can be displayed and stored as a record of defect growth.

  15. Science DMZ Case Studies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU Science DMZ @ Penn & VTTI Science DMZ @ NOAA Science DMZ @ NERSC Science DMZ @ ALS Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies » Science DMZ Case Studies Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science

  16. DOE Publishes CALiPER Report on Linear (T8) LED Lamps in Recessed Troffers

    Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 21.2, which is part of a series of investigations on linear LED lamps. Report 21.2 focuses on the performance of three linear (T8...

  17. Object-Oriented Programming in Fortran 2003

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Conventional programming costs and complexity; Alternative programming paradigms; How ... Object---Oriented Design (OOD). Unified Modeling Language (UML): use case and class ...

  18. International linear collider reference design report

    SciTech Connect

    Aarons, G.

    2007-06-22

    The International Linear Collider will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. A proposed electron-positron collider, the ILC will complement the Large Hadron Collider, a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, together unlocking some of the deepest mysteries in the universe. With LHC discoveries pointing the way, the ILC -- a true precision machine -- will provide the missing pieces of the puzzle. Consisting of two linear accelerators that face each other, the ILC will hurl some 10 billion electrons and their anti-particles, positrons, toward each other at nearly the speed of light. Superconducting accelerator cavities operating at temperatures near absolute zero give the particles more and more energy until they smash in a blazing crossfire at the centre of the machine. Stretching approximately 35 kilometres in length, the beams collide 14,000 times every second at extremely high energies -- 500 billion-electron-volts (GeV). Each spectacular collision creates an array of new particles that could answer some of the most fundamental questions of all time. The current baseline design allows for an upgrade to a 50-kilometre, 1 trillion-electron-volt (TeV) machine during the second stage of the project. This reference design provides the first detailed technical snapshot of the proposed future electron-positron collider, defining in detail the technical parameters and components that make up each section of the 31-kilometer long accelerator. The report will guide the development of the worldwide R&D program, motivate international industrial studies and serve as the basis for the final engineering design needed to make an official project proposal later this decade.

  19. Integrating Photovoltaic Systems into Low-Income Housing Developments: A Case Study on the Creation of a New Residential Financing Model and Low-Income Resident Job Training Program, September 2011 (Brochure)

    SciTech Connect

    Dean, J.; Smith-Dreier, C.; Mekonnen, G.; Hawthorne, W.

    2011-09-01

    This case study covers the process of successfully integrating photovoltaic (PV) systems into a low-income housing development in northeast Denver, Colorado, focusing specifically on a new financing model and job training. The Northeast Denver Housing Center (NDHC), working in cooperation with Del Norte Neighborhood Development Corporation, Groundwork Denver, and the National Renewable Energy Laboratory (NREL), was able to finance the PV system installations by blending private equity funding with utility rebates, federal tax credits, and public sector funding. A grant provided by the Governor's Energy Office allowed for the creation of the new financing model. In addition, the program incorporated an innovative low-income job training program and an energy conservation incentive program.

  20. Evaluation Helps Program Increase Sales of Energy Saving Light...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Increase Sales of Energy Saving Light Bulbs Among Women Evaluation Helps Program ... the Case Study Series, explaining how "Evaluation Helps Program Increase Sales of Energy ...

  1. Design and performance of the Stanford Linear Collider Control System

    SciTech Connect

    Melen, R.E.

    1984-10-01

    The success of the Stanford Linear Collider (SLC) will be dependent upon the implementation of a very large advanced computer-based instrumentation and control system. This paper describes the architectural design of this system as well as a critique of its performance. This critique is based on experience obtained from its use in the control and monitoring of 1/3 of the SLAC linac and in support of an expensive experimental machine physics experimental program. 11 references, 3 figures.

  2. Reticle stage based linear dosimeter

    DOEpatents

    Berger, Kurt W.

    2007-03-27

    A detector to measure EUV intensity employs a linear array of photodiodes. The detector is particularly suited for photolithography systems that includes: (i) a ringfield camera; (ii) a source of radiation; (iii) a condenser for processing radiation from the source of radiation to produce a ringfield illumination field for illuminating a mask; (iv) a reticle that is positioned at the ringfield camera's object plane and from which a reticle image in the form of an intensity profile is reflected into the entrance pupil of the ringfield camera, wherein the reticle moves in a direction that is transverse to the length of the ringfield illumination field that illuminates the reticle; (v) detector for measuring the entire intensity along the length of the ringfield illumination field that is projected onto the reticle; and (vi) a wafer onto which the reticle imaged is projected from the ringfield camera.

  3. Reticle stage based linear dosimeter

    DOEpatents

    Berger, Kurt W.

    2005-06-14

    A detector to measure EUV intensity employs a linear array of photodiodes. The detector is particularly suited for photolithography systems that includes: (i) a ringfield camera; (ii) a source of radiation; (iii) a condenser for processing radiation from the source of radiation to produce a ringfield illumination field for illuminating a mask; (iv) a reticle that is positioned at the ringfield camera's object plane and from which a reticle image in the form of an intensity profile is reflected into the entrance pupil of the ringfield camera, wherein the reticle moves in a direction that is transverse to the length of the ringfield illumination field that illuminates the reticle; (v) detector for measuring the entire intensity along the length of the ringfield illumination field that is projected onto the reticle; and (vi) a wafer onto which the reticle imaged is projected from the ringfield camera.

  4. High Performance Preconditioners and Linear Solvers

    Energy Science and Technology Software Center

    2006-07-27

    Hypre is a software library focused on the solution of large, sparse linear systems of equations on massively parallel computers.

  5. Water Efficiency Improvements At Various Environmental Protection Agency Sites: Best Management Practices Case Study #12 „ Laboratory/Medical Equipment (Brochure), Federal Energy Management Program (FEMP)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Environmental Protection Agency (EPA) built a successful water conservation program and reduced potable water use through a series of initiatives at EPA laboratories. EPA completed projects in all of the U.S. Department of Energy (DOE) Federal Energy Management Program's (FEMP) 14 Best Management Practice (BMP) categories. The projects highlighted below demonstrate EPA's ability to reduce water use in the laboratory/medical equipment BMP category by implementing vacuum pump and steam steril-

  6. Working With Weatherization Assistance Programs

    Energy.gov [DOE]

    Better Buildings Low Income Peer Exchange Call Featuring: Case study on integration of income-qualified programs into Michigan’s Better Buildings program, call slides and discussion summary, April 14, 2011.

  7. EERE Strategic Program Review

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Engines, Concentrating Solar Power Troughs and ... 4-1: Case Study of Fuel Cell Program Management 4-24 5. ... 2- 4 Figure 2-4: U.S. petroleum consumption by sector 2- ...

  8. Programs & Workshops

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    CrossConnects Workshop Series Operating Innovative Networks Workshop Series Enlighten Your Research Global Program Science Requirements Reviews Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Programs & Workshops Science Engagement Move your data Programs & Workshops CrossConnects Workshop Series Operating Innovative Networks Workshop Series Enlighten Your Research Global

  9. Utah Success StoryA Performance Contracting Program

    Energy.gov [DOE]

    Provides an overview case study of Utah's Performance Contracting Program. Author: Energy Services Coalition

  10. Washington Success StoryA Performance Contracting Program

    Energy.gov [DOE]

    Provides an overview case study of Washington's Performance Contracting Program. Author: Energy Services Coalition

  11. NASA's Marshall Space Flight Center Saves Water With High-Efficiency Toilet and Urinal Program: Best Management Practice Case Study #6 „ Toilets and Urinals (Fact Sheet), Federal Energy Management Program (FEMP)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) has a longstanding, successful sustainability program that focuses on energy and water efficiency as well as environmental protection. MSFC's key operations include propulsion and transportation systems for the space shuttle and Ares rockets. MSFC also provides advanced engineering and operations for International Space Station systems. Located in Huntsville, Alabama, adjacent to Redstone Arsenal, MSFC

  12. Technical survey of DOE programs and facilities applicable to the co-storage of commercial greater-than-Class C Low-Level Radioactive Waste and DOE special Case Waste

    SciTech Connect

    Allred, W.E.

    1995-01-01

    This report presents information on those US Department of Energy (DOE) management programs and facilities, existing and planned, that are potentially capable of storing DOE Special Case Waste (SCW) until a disposal capability is available. Major emphasis is given to the possibility of storing commercial greater-than-Class C low-level radioactive waste (GTCC LLW) together with DOE SCW, as well as with other waste types. In addition to this primary issue, the report gives an in-depth background on SCW and GTCC LLW, and discusses their similarities. Institutional issues concerning these waste types are not addressed in this report.

  13. International Workshop on Linear Colliders 2010

    ScienceCinema

    None

    2011-10-06

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  14. Program Analysis

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Vehicle Technologies Plenary

  15. Ultra-high vacuum photoelectron linear accelerator

    DOEpatents

    Yu, David U.L.; Luo, Yan

    2013-07-16

    An rf linear accelerator for producing an electron beam. The outer wall of the rf cavity of said linear accelerator being perforated to allow gas inside said rf cavity to flow to a pressure chamber surrounding said rf cavity and having means of ultra high vacuum pumping of the cathode of said rf linear accelerator. Said rf linear accelerator is used to accelerate polarized or unpolarized electrons produced by a photocathode, or to accelerate thermally heated electrons produced by a thermionic cathode, or to accelerate rf heated field emission electrons produced by a field emission cathode.

  16. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume 2: Physics You are accessing a ...

  17. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    Linear Collider Technical Design Report - Volume 2: Physics Baer, Howard; Barklow, Tim; Fujii, Keisuke; Gao, Yuanning; Hoang, Andre; Kanemura, Shinya; List, Jenny; Logan, Heather...

  18. The Linear Engine Pathway of Transformation

    Energy.gov [DOE]

    This poster highlights the major milestones in the history of the linear engine in terms of technological advances, novel designs, and economic/social impact.

  19. LED Replacements for Linear Fluorescent Lamps Webcast

    Energy.gov [DOE]

    In this June 20, 2011 webcast on LED products marketed as replacements for linear fluorescent lamps, Jason Tuenge of the Pacific Northwest National Laboratory (PNNL) discussed current Lighting...

  20. NASA's Marshall Space Flight Center Improves Cooling System Performance: Best Management Practice Case Study #10: Cooling Towers (Revised) (Fact Sheet), Federal Energy Management Program (FEMP)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) is located in Huntsville, Alabama, adjacent to Redstone Arsenal. MSFC has over 4.5 million square feet of building space occupied by 7,000 personnel, and consumes approximately 240 million gallons of potable water annually, supplied through the City of Huntsville. MSFC has a longstanding sustainability program that revolves around energy and water efficiency as well as environmental protection. In 2005,

  1. NASA's Marshall Space Flight Center Saves Water With High-Efficiency Toilet and Urinal Program: Best Management Practice Case Study #6 - Toilets and Urinals (Fact Sheet)

    SciTech Connect

    Not Available

    2011-02-01

    The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) has a longstanding, successful sustainability program that focuses on energy and water efficiency as well as environmental protection. Because MSFC was built in the 1960s, most of the buildings house outdated, inefficient restroom fixtures. The facility engineering team at MSFC developed an innovative efficiency model for replacing these older toilets and urinals.

  2. Applying Best Practices to Florida Local Government Retrofit Programs, Central Florida (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Whole-House Solutions for Existing Homes Applying Best Practices to Florida Local Government Retrofit Programs Central Florida During 2009, 2010, and 2011, researchers of the U.S. Department of Energy's research team Building America Partnership for Improved Residential Construction (BA-PIRC) provided analysis and recommendations to eight affordable housing entities conduct- ing comprehensive renovations in 70 distressed, foreclosed homes in central Florida. Partners achieved a mutually agreed

  3. Finite element analyses of a linear-accelerator electron gun

    SciTech Connect

    Iqbal, M. E-mail: muniqbal@ihep.ac.cn; Wasy, A.; Islam, G. U.; Zhou, Z.

    2014-02-15

    Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator.

  4. Program Evaluation: Program Life Cycle

    Energy.gov [DOE]

    In general, different types of evaluation are carried out over different parts of a program's life cycle (e.g., Creating a program, Program is underway, or Closing out or end of program)....

  5. Solving linear inequalities in a least squares sense

    SciTech Connect

    Bramley, R.; Winnicka, B.

    1994-12-31

    Let A {element_of} {Re}{sup mxn} be an arbitrary real matrix, and let b {element_of} {Re}{sup m} a given vector. A familiar problem in computational linear algebra is to solve the system Ax = b in a least squares sense; that is, to find an x* minimizing {parallel}Ax {minus} b{parallel}, where {parallel} {center_dot} {parallel} refers to the vector two-norm. Such an x* solves the normal equations A{sup T}(Ax {minus} b) = 0, and the optimal residual r* = b {minus} Ax* is unique (although x* need not be). The least squares problem is usually interpreted as corresponding to multiple observations, represented by the rows of A and b, on a vector of data x. The observations may be inconsistent, and in this case a solution is sought that minimizes the norm of the residuals. A less familiar problem to numerical linear algebraists is the solution of systems of linear inequalities Ax {le} b in a least squares sense, but the motivation is similar: if a set of observations places upper or lower bounds on linear combinations of variables, the authors want to find x* minimizing {parallel} (Ax {minus} b){sub +} {parallel}, where the i{sup th} component of the vector v{sub +} is the maximum of zero and the i{sup th} component of v.

  6. Non-Linear Seismic Soil Structure Interaction (SSI) Method for...

    Office of Environmental Management (EM)

    Non-Linear Seismic Soil Structure Interaction (SSI) Method for Developing Non-Linear Seismic SSI Analysis Techniques Non-Linear Seismic Soil Structure Interaction (SSI) Method for ...

  7. Voltage regulation in linear induction accelerators

    DOEpatents

    Parsons, William M.

    1992-01-01

    Improvement in voltage regulation in a Linear Induction Accelerator wherein a varistor, such as a metal oxide varistor, is placed in parallel with the beam accelerating cavity and the magnetic core. The non-linear properties of the varistor result in a more stable voltage across the beam accelerating cavity than with a conventional compensating resistance.

  8. Voltage regulation in linear induction accelerators

    DOEpatents

    Parsons, W.M.

    1992-12-29

    Improvement in voltage regulation in a linear induction accelerator wherein a varistor, such as a metal oxide varistor, is placed in parallel with the beam accelerating cavity and the magnetic core is disclosed. The non-linear properties of the varistor result in a more stable voltage across the beam accelerating cavity than with a conventional compensating resistance. 4 figs.

  9. Using Qualified Energy Conservation Bonds (QECBs) to Fund a Residential Energy Efficiency Loan Program: Case Study on Saint Louis County, MO

    SciTech Connect

    Zimring, Mark

    2011-06-23

    Qualified Energy Conservation Bonds (QECBs) are federally-subsidized debt instruments that enable state, tribal, and local government issuers to borrow money to fund a range of qualified energy conservation projects. QECBs offer issuers very attractive borrowing rates and long terms, and can fund low-interest energy efficiency loans for home and commercial property owners. Saint Louis County, MO recently issued over $10 million of QECBs to finance the Saint Louis County SAVES residential energy efficiency loan program. The county's experience negotiating QECB regulations and restrictions can inform future issuers.

  10. High-gradient compact linear accelerator

    DOEpatents

    Carder, B.M.

    1998-05-26

    A high-gradient linear accelerator comprises a solid-state stack in a vacuum of five sets of disc-shaped Blumlein modules each having a center hole through which particles are sequentially accelerated. Each Blumlein module is a sandwich of two outer conductive plates that bracket an inner conductive plate positioned between two dielectric plates with different thicknesses and dielectric constants. A third dielectric core in the shape of a hollow cylinder forms a casing down the series of center holes, and it has a dielectric constant different that the two dielectric plates that sandwich the inner conductive plate. In operation, all the inner conductive plates are charged to the same DC potential relative to the outer conductive plates. Next, all the inner conductive plates are simultaneously shorted to the outer conductive plates at the outer diameters. The signal short will propagate to the inner diameters at two different rates in each Blumlein module. A faster wave propagates quicker to the third dielectric core across the dielectric plates with the closer spacing and lower dielectric constant. When the faster wave reaches the inner extents of the outer and inner conductive plates, it reflects back outward and reverses the field in that segment of the dielectric core. All the field segments in the dielectric core are then in unipolar agreement until the slower wave finally propagates to the third dielectric core across the dielectric plates with the wider spacing and higher dielectric constant. During such unipolar agreement, particles in the core are accelerated with gradients that exceed twenty megavolts per meter. 10 figs.

  11. High-gradient compact linear accelerator

    DOEpatents

    Carder, Bruce M.

    1998-01-01

    A high-gradient linear accelerator comprises a solid-state stack in a vacuum of five sets of disc-shaped Blumlein modules each having a center hole through which particles are sequentially accelerated. Each Blumlein module is a sandwich of two outer conductive plates that bracket an inner conductive plate positioned between two dielectric plates with different thicknesses and dielectric constants. A third dielectric core in the shape of a hollow cylinder forms a casing down the series of center holes, and it has a dielectric constant different that the two dielectric plates that sandwich the inner conductive plate. In operation, all the inner conductive plates are charged to the same DC potential relative to the outer conductive plates. Next, all the inner conductive plates are simultaneously shorted to the outer conductive plates at the outer diameters. The signal short will propagate to the inner diameters at two different rates in each Blumlein module. A faster wave propagates quicker to the third dielectric core across the dielectric plates with the closer spacing and lower dielectric constant. When the faster wave reaches the inner extents of the outer and inner conductive plates, it reflects back outward and reverses the field in that segment of the dielectric core. All the field segments in the dielectric core are then in unipolar agreement until the slower wave finally propagates to the third dielectric core across the dielectric plates with the wider spacing and higher dielectric constant. During such unipolar agreement, particles in the core are accelerated with gradients that exceed twenty megavolts per meter.

  12. Linear corotation torques in non-barotropic disks

    SciTech Connect

    Tsang, David

    2014-02-20

    A fully analytic expression for the linear corotation torque to first order in eccentricity for planets in non-barotropic protoplanetary disks is derived, taking into account the effect of disk entropy gradients. This torque formula is applicable to both the co-orbital, corotation torques and the non-co-orbital, corotation torques—for planets in orbits with non-zero eccentricity—in disks where the thermal diffusivity and viscosity are sufficient to maintain the linearity of these interactions. While the co-orbital, corotation torque is important for migration of planets in Type I migration, the non-co-orbital, corotation torque plays an important role in the eccentricity evolution of giant planets that have opened gaps in the disk. The presence of an entropy gradient in the disk can significantly modify the corotation torque in both these cases.

  13. Voila: A visual object-oriented iterative linear algebra problem solving environment

    SciTech Connect

    Edwards, H.C.; Hayes, L.J.

    1994-12-31

    Application of iterative methods to solve a large linear system of equations currently involves writing a program which calls iterative method subprograms from a large software package. These subprograms have complex interfaces which are difficult to use and even more difficult to program. A problem solving environment specifically tailored to the development and application of iterative methods is needed. This need will be fulfilled by Voila, a problem solving environment which provides a visual programming interface to object-oriented iterative linear algebra kernels. Voila will provide several quantum improvements over current iterative method problem solving environments. First, programming and applying iterative methods is considerably simplified through Voila`s visual programming interface. Second, iterative method algorithm implementations are independent of any particular sparse matrix data structure through Voila`s object-oriented kernels. Third, the compile-link-debug process is eliminated as Voila operates as an interpreter.

  14. FAQ for Case Study Authors

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Reviews FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background...

  15. DOE Publishes CALiPER Report on Cost-Effectiveness of Linear (T8) LED Lamps

    Energy Saver

    | Department of Energy CALiPER Report on Cost-Effectiveness of Linear (T8) LED Lamps DOE Publishes CALiPER Report on Cost-Effectiveness of Linear (T8) LED Lamps May 30, 2014 - 4:58pm Addthis The U.S. Department of Energy's CALiPER program has released Report 21.3, which is part of a series of investigations on linear LED lamps. Report 21.3 details a set of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38W total power draw) or fluorescent lamps (51W total power

  16. Optically isolated signal coupler with linear response

    DOEpatents

    Kronberg, James W.

    1994-01-01

    An optocoupler for isolating electrical signals that translates an electrical input signal linearly to an electrical output signal. The optocoupler comprises a light emitter, a light receiver, and a light transmitting medium. The light emitter, preferably a blue, silicon carbide LED, is of the type that provides linear, electro-optical conversion of electrical signals within a narrow wavelength range. Correspondingly, the light receiver, which converts light signals to electrical signals and is preferably a cadmium sulfide photoconductor, is linearly responsive to light signals within substantially the same wavelength range as the blue LED.

  17. International Workshop on Linear Colliders 2010

    ScienceCinema

    None

    2016-07-12

    IWLC2010 International Workshop on Linear Colliders 2010ECFA-CLIC-ILC joint meeting: Monday 18 October - Friday 22 October 2010Venue: CERN and CICG (International Conference Centre Geneva, Switzerland) This year, the International Workshop on Linear Colliders organized by the European Committee for Future Accelerators (ECFA) will study the physics, detectors and accelerator complex of a linear collider covering both CLIC and ILC options.Contact Workshop Secretariat  IWLC2010 is hosted by CERN

  18. LINEAR COLLIDER PHYSICS RESOURCE BOOK FOR SNOWMASS 2001.

    SciTech Connect

    ABE,T.; DAWSON,S.; HEINEMEYER,S.; MARCIANO,W.; PAIGE,F.; TURCOT,A.S.; ET AL

    2001-05-03

    The American particle physics community can look forward to a well-conceived and vital program of experimentation for the next ten years, using both colliders and fixed target beams to study a wide variety of pressing questions. Beyond 2010, these programs will be reaching the end of their expected lives. The CERN LHC will provide an experimental program of the first importance. But beyond the LHC, the American community needs a coherent plan. The Snowmass 2001 Workshop and the deliberations of the HEPAP subpanel offer a rare opportunity to engage the full community in planning our future for the next decade or more. A major accelerator project requires a decade from the beginning of an engineering design to the receipt of the first data. So it is now time to decide whether to begin a new accelerator project that will operate in the years soon after 2010. We believe that the world high-energy physics community needs such a project. With the great promise of discovery in physics at the next energy scale, and with the opportunity for the uncovering of profound insights, we cannot allow our field to contract to a single experimental program at a single laboratory in the world. We believe that an e{sup +}e{sup {minus}} linear collider is an excellent choice for the next major project in high-energy physics. Applying experimental techniques very different from those used at hadron colliders, an e{sup +}e{sup {minus}} linear collider will allow us to build on the discoveries made at the Tevatron and the LHC, and to add a level of precision and clarity that will be necessary to understand the physics of the next energy scale. It is not necessary to anticipate specific results from the hadron collider programs to argue for constructing an e{sup +}e{sup {minus}} linear collider; in any scenario that is now discussed, physics will benefit from the new information that e{sup +}e{sup {minus}} experiments can provide.

  19. Educational Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Educational Programs Educational Programs The Lab provides a variety of focused educational programs aimed at the development and application of essential knowledge and skills in scientific fields key to our national security mission. Contacts Student Programs Team Leader Scott Robbins National Security Education Center 505-665-3639 Email Los Alamos Educational Programs Educational programs at Los Alamos combine significant hands-on group project experiences with more traditional classroom

  20. Weatherization Program

    Energy.gov [DOE]

    Residences participating in the Home Energy Rebate or New Home Rebate Program may not also participate in the Weatherization Program

  1. Program Administration

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1997-08-21

    This volume describes program administration that establishes and maintains effective organizational management and control of the emergency management program. Canceled by DOE G 151.1-3.

  2. The IAEA Coordinated Research Program on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis: Description of the Benchmark Test Cases and Phases

    SciTech Connect

    Frederik Reitsma; Gerhard Strydom; Bismark Tyobeka; Kostadin Ivanov

    2012-10-01

    The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The uncertainties in the HTR analysis tools are today typically assessed with sensitivity analysis and then a few important input uncertainties (typically based on a PIRT process) are varied in the analysis to find a spread in the parameter of importance. However, one wish to apply a more fundamental approach to determine the predictive capability and accuracies of coupled neutronics/thermal-hydraulics and depletion simulations used for reactor design and safety assessment. Today there is a broader acceptance of the use of uncertainty analysis even in safety studies and it has been accepted by regulators in some cases to replace the traditional conservative analysis. Finally, there is also a renewed focus in supplying reliable covariance data (nuclear data uncertainties) that can then be used in uncertainty methods. Uncertainty and sensitivity studies are therefore becoming an essential component of any significant effort in data and simulation improvement. In order to address uncertainty in analysis and methods in the HTGR community the IAEA launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modelling early in 2012. The project is built on the experience of the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity, but focuses specifically on the peculiarities of HTGR designs and its simulation requirements. Two benchmark problems were defined with the prismatic type design represented by the MHTGR-350 design from General Atomics (GA) while a 250 MW modular pebble bed design, similar to the INET (China) and indirect-cycle PBMR (South Africa) designs are also included. In the paper more detail on the benchmark cases, the different specific phases and tasks and the latest

  3. Status of the SLC (Stanford Linear Collider)

    SciTech Connect

    Coupal, D.P.

    1989-07-01

    This report presents a brief review of the status of the Stanford Linear Collider. Topics covered are: Beam luminosity, Detectors and backgrounds; and Future prospects. 3 refs., 8 figs., 1 tab. (LSP)

  4. Randomized Linear Algebra for BioImaging

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Randomized Linear Algebra for BioImaging Randomized Linear Algebra for BioImaging Mass-Spectrometry Imaging Mass spectrometry measures ions derived from the molecules present in a biological sample. Spectra of the ions are acquired at each location (pixel) of a sample, allowing for the collection of spatially resolved mass spectra. This mode of analysis is known as mass spectrometry imaging (MSI). The addition of ion-mobility separation (IMS) to MSI adds another dimension, drift time. The

  5. Visiting Faculty Program Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Visiting Faculty Program Program Description The Visiting Faculty Program seeks to increase the research competitiveness of faculty members and their students at institutions historically underrepresented in the research community in order to expand the workforce vital to Department of Energy mission areas. As part of the program, selected university/college faculty members collaborate with DOE laboratory research staff on a research project of mutual interest. Program Objective The program is

  6. Visiting Faculty Program Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    covers stipend and travel reimbursement for the 10-week program. Teacherfaculty participants: 1 Program Coordinator: Scott Robbins Email: srobbins@lanl.gov Phone number: 663-5621...

  7. Technology Deployment Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Deployment Case Studies Technology Deployment Case Studies Technology Deployment Case Studies Find efficient technologies and products for federal applications on the Federal Energy Management Program website. View All Maps Addthis

  8. Light Water Reactor Sustainability Program Support and Modeling for the Boiling Water Reactor Station Black Out Case Study Using RELAP and RAVEN

    SciTech Connect

    Diego Mandelli; Curtis Smith; Thomas Riley; John Schroeder; Cristian Rabiti; Aldrea Alfonsi; Joe Nielsen; Dan Maljovec; Bie Wang; Valerio Pascucci

    2013-09-01

    The existing fleet of nuclear power plants is in the process of extending its lifetime and increasing the power generated. In order to evaluate the impact of these two factors on the safety of the plant, the Risk Informed Safety Margin Characterization (RISMC) project aims to provide insight to decision makers through a series of simulations of the plant dynamics for different initial conditions (e.g., probabilistic analysis and uncertainty quantification). This report focuses, in particular, on the impact of power uprate on the safety of a boiled water reactor system. The case study considered is a loss of off-site power followed by the loss of diesel generators, i.e., a station black out (SBO) event. Analysis is performed by using a thermo-hydraulic code, i.e. RELAP-5, and a stochastic analysis tool currently under development at INL, i.e. RAVEN. Starting from the event tree models contained in SAPHIRE, we built the input file for RELAP-5 that models in great detail system dynamics under SBO conditions. We also interfaced RAVEN with RELAP-5 so that it would be possible to run multiple RELAP-5 simulation runs by changing specific keywords of the input file. We both employed classical statistical tools, i.e. Monte-Carlo, and more advanced machine learning based algorithms to perform uncertainty quantification in order to quantify changes in system performance and limitations as a consequence of power uprate. We also employed advanced data analysis and visualization tools that helped us to correlate simulation outcome such as maximum core temperature with a set of input uncertain parameters. Results obtained gave a detailed overview of the issues associated to power uprate for a SBO accident scenario. We were able to quantify how timing of safety related events were impacted by a higher reactor core power. Such insights can provide useful material to the decision makers to perform risk-infomed safety margins management.

  9. School District Success Story-A Performance Contracting Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    School District Success Story-A Performance Contracting Program School District Success Story-A Performance Contracting Program Provides an overview case study of Douglas County,...

  10. Evaluation Prompts ENERGY STAR Program to Replace Web Tool, Saving...

    Energy.gov [DOE] (indexed site)

    U.S. Environmental Protection Agency's ENERGY STAR Residential Program, is part of the Case Study Series, highlighting how "Evaluation Prompts ENERGY STAR Program to Replace Web ...

  11. Final Report for the UNIVERSITY-BASED DETECTOR RESEARCH AND DEVELOPMENT FOR THE INTERNATIONAL LINEAR COLLIDER

    SciTech Connect

    Brau, James E

    2013-04-22

    The U.S Linear Collider Detector R&D program, supported by the DOE and NSF umbrella grants to the University of Oregon, made significant advances on many critical aspects of the ILC detector program. Progress advanced on vertex detector sensor development, silicon and TPC tracking, calorimetry on candidate technologies, and muon detection, as well as on beamline measurements of luminosity, energy, and polarization.

  12. Noiseless Vlasov–Poisson simulations with linearly transformed particles

    SciTech Connect

    Campos Pinto, Martin; Sonnendrücker, Eric; Friedman, Alex; Grote, David P.; Lund, Steve M.

    2014-10-15

    We introduce a deterministic discrete-particle simulation approach, the Linearly-Transformed Particle-In-Cell (LTPIC) method, that employs linear deformations of the particles to reduce the noise traditionally associated with particle schemes. Formally, transforming the particles is justified by local first order expansions of the characteristic flow in phase space. In practice the method amounts of using deformation matrices within the particle shape functions; these matrices are updated via local evaluations of the forward numerical flow. Because it is necessary to periodically remap the particles on a regular grid to avoid excessively deforming their shapes, the method can be seen as a development of Denavit's Forward Semi-Lagrangian (FSL) scheme (Denavit, 1972 [8]). However, it has recently been established (Campos Pinto, 2012 [20]) that the underlying Linearly-Transformed Particle scheme converges for abstract transport problems, with no need to remap the particles; deforming the particles can thus be seen as a way to significantly lower the remapping frequency needed in the FSL schemes, and hence the associated numerical diffusion. To couple the method with electrostatic field solvers, two specific charge deposition schemes are examined, and their performance compared with that of the standard deposition method. Finally, numerical 1d1v simulations involving benchmark test cases and halo formation in an initially mismatched thermal sheet beam demonstrate some advantages of our LTPIC scheme over the classical PIC and FSL methods. Benchmarked test cases also indicate that, for numerical choices involving similar computational effort, the LTPIC method is capable of accuracy comparable to or exceeding that of state-of-the-art, high-resolution Vlasov schemes.

  13. Light Water Reactor Sustainability Program - Integrated Program...

    Energy Saver

    Program - Integrated Program Plan Light Water Reactor Sustainability Program - Integrated Program Plan The Light Water Reactor Sustainability (LWRS) Program is a research and ...

  14. Dual-range linearized transimpedance amplifier system

    DOEpatents

    Wessendorf, Kurt O.

    2010-11-02

    A transimpedance amplifier system is disclosed which simultaneously generates a low-gain output signal and a high-gain output signal from an input current signal using a single transimpedance amplifier having two different feedback loops with different amplification factors to generate two different output voltage signals. One of the feedback loops includes a resistor, and the other feedback loop includes another resistor in series with one or more diodes. The transimpedance amplifier system includes a signal linearizer to linearize one or both of the low- and high-gain output signals by scaling and adding the two output voltage signals from the transimpedance amplifier. The signal linearizer can be formed either as an analog device using one or two summing amplifiers, or alternately can be formed as a digital device using two analog-to-digital converters and a digital signal processor (e.g. a microprocessor or a computer).

  15. Linear transformer driver for pulse generation

    DOEpatents

    Kim, Alexander A; Mazarakis, Michael G; Sinebryukhov, Vadim A; Volkov, Sergey N; Kondratiev, Sergey S; Alexeenko, Vitaly M; Bayol, Frederic; Demol, Gauthier; Stygar, William A

    2015-04-07

    A linear transformer driver includes at least one ferrite ring positioned to accept a load. The linear transformer driver also includes a first power delivery module that includes a first charge storage devices and a first switch. The first power delivery module sends a first energy in the form of a first pulse to the load. The linear transformer driver also includes a second power delivery module including a second charge storage device and a second switch. The second power delivery module sends a second energy in the form of a second pulse to the load. The second pulse has a frequency that is approximately three times the frequency of the first pulse. The at least one ferrite ring is positioned to force the first pulse and the second pulse to the load by temporarily isolating the first pulse and the second pulse from an electrical ground.

  16. Hanford Site Voluntary Protection Program - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Hanford Site Voluntary Protection Program Hanford Site Voluntary Protection Program Hanford Site Voluntary Protection Program VPP Home VPP Hanford Site Champions Committee Getting Started Maintaining STAR VPP Communications VPP Conferences Hanford Site Voluntary Protection Program Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size 2013 VPPPA Outreach Award Winners VPP Committee Business Case (PDF)

  17. Linear Transformation Method for Multinuclide Decay Calculation

    SciTech Connect

    Ding Yuan

    2010-12-29

    A linear transformation method for generic multinuclide decay calculations is presented together with its properties and implications. The method takes advantage of the linear form of the decay solution N(t) = F(t)N{sub 0}, where N(t) is a column vector that represents the numbers of atoms of the radioactive nuclides in the decay chain, N{sub 0} is the initial value vector of N(t), and F(t) is a lower triangular matrix whose time-dependent elements are independent of the initial values of the system.

  18. Linear Concentrator Solar Power Plant Illustration

    Energy.gov [DOE]

    This graphic illustrates linear concentrating solar power (CSP) collectors that capture the sun's energy with large mirrors that reflect and focus the sunlight onto a linear receiver tube. The receiver contains a fluid that is heated by the sunlight and then used to create superheated steam that spins a turbine that drives a generator to produce electricity. Alternatively, steam can be generated directly in the solar field, eliminating the need for costly heat exchangers. In a parabolic trough system, the receiver tube is positioned along the focal line of each parabola-shaped reflector.

  19. Linear and angular retroreflecting interferometric alignment target

    DOEpatents

    Maxey, L. Curtis

    2001-01-01

    The present invention provides a method and apparatus for measuring both the linear displacement and angular displacement of an object using a linear interferometer system and an optical target comprising a lens, a reflective surface and a retroreflector. The lens, reflecting surface and retroreflector are specifically aligned and fixed in optical connection with one another, creating a single optical target which moves as a unit that provides multi-axis displacement information for the object with which it is associated. This displacement information is useful in many applications including machine tool control systems and laser tracker systems, among others.

  20. Beamstrahlung spectra in next generation linear colliders

    SciTech Connect

    Barklow, T.; Chen, P. ); Kozanecki, W. )

    1992-04-01

    For the next generation of linear colliders, the energy loss due to beamstrahlung during the collision of the e{sup +}e{sup {minus}} beams is expected to substantially influence the effective center-of-mass energy distribution of the colliding particles. In this paper, we first derive analytical formulae for the electron and photon energy spectra under multiple beamstrahlung processes, and for the e{sup +}e{sup {minus}} and {gamma}{gamma} differential luminosities. We then apply our formulation to various classes of 500 GeV e{sup +}e{sup {minus}} linear collider designs currently under study.

  1. DOE Publishes CALiPER Report on Cost-Effectiveness of Linear (T8) LED Lamps

    Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 21.3, which is part of a series of investigations on linear LED lamps. Report 21.3 details a set of life-cycle cost simulations...

  2. Multi-facility Workflow Case Study

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies » Multi-facility Workflow Case Study Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1

  3. Linear corrugating: Forest products project fact sheet

    SciTech Connect

    NREL

    1999-12-14

    This is a fact sheet written for the Inventions and Innovation Program about a new process for creating corrugated cardboard products.

  4. Interactions Between Energy Efficiecy Programs Funded Under Recover Act and Utility Customer-funded Energy Efficiency Programs

    Energy.gov [DOE]

    This webinar covered utility customer-funded and Recovery Act-funded energy efficiency programs, results of analysis in 12 case study states, and case study examples.

  5. HVAC Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture Heating Ventilation and Air Conditioning Energy efficient Heating Ventilation and...

  6. Retiree Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Library Services » Retiree Program Retiree Program The Research Library offers a 1 year library card to retired LANL employees that allows usage of Library materials. This service is only available to retired LANL employees. Who is eligible? Any Laboratory retiree, not participating in any other program (ie, Guest Scientist, Affiliate). Upon completion of your application, you will be notified of your acceptance into the program. This does not include past students. What is the term of the

  7. Comparative study of microwave radiation-induced magnetoresistive oscillations induced by circularly- and linearly- polarized photo-excitation

    SciTech Connect

    Ye, Tianyu; Liu, Han -Chun; Wang, Zhuo; Wegscheider, W.; Mani, Ramesh G.

    2015-10-09

    A comparative study of the radiation-induced magnetoresistance oscillations in the high mobility GaAs/AlGaAs heterostructure two dimensional electron system (2DES) under linearly- and circularly- polarized microwave excitation indicates a profound difference in the response observed upon rotating the microwave launcher for the two cases, although circularly polarized microwave radiation induced magnetoresistance oscillations observed at low magnetic fields are similar to the oscillations observed with linearly polarized radiation. For the linearly polarized radiation, the magnetoresistive response is a strong sinusoidal function of the launcher rotation (or linear polarization) angle, θ. As a result, for circularly polarized radiation, the oscillatory magnetoresistive response is hardly sensitive to θ.

  8. Self-Similar Nonlinear Dynamical Solutions for One-Component Nonneutral Plasma in a Time-Dependent Linear Focusing Field

    SciTech Connect

    Hong Qin and Ronald C. Davidson

    2011-07-19

    In a linear trap confining a one-component nonneutral plasma, the external focusing force is a linear function of the configuration coordinates and/or the velocity coordinates. Linear traps include the classical Paul trap and the Penning trap, as well as the newly proposed rotating-radio- frequency traps and the Mobius accelerator. This paper describes a class of self-similar nonlinear solutions of nonneutral plasma in general time-dependent linear focusing devices, with self-consistent electrostatic field. This class of nonlinear solutions includes many known solutions as special cases.

  9. KLU2 Direct Linear Solver Package

    Energy Science and Technology Software Center

    2012-01-04

    KLU2 is a direct sparse solver for solving unsymmetric linear systems. It is related to the existing KLU solver, (in Amesos package and also as a stand-alone package from University of Florida) but provides template support for scalar and ordinal types. It uses a left looking LU factorization method.

  10. Finite Element Interface to Linear Solvers

    Energy Science and Technology Software Center

    2005-03-18

    Sparse systems of linear equations arise in many engineering applications, including finite elements, finite volumes, and others. The solution of linear systems is often the most computationally intensive portion of the application. Depending on the complexity of problems addressed by the application, there may be no single solver capable of solving all of the linear systems that arise. This motivates the desire to switch an application from one solver librwy to another, depending on themore » problem being solved. The interfaces provided by solver libraries differ greatly, making it difficult to switch an application code from one library to another. The amount of library-specific code in an application Can be greatly reduced by having an abstraction layer between solver libraries and the application, putting a common "face" on various solver libraries. One such abstraction layer is the Finite Element Interface to Linear Solvers (EEl), which has seen significant use by finite element applications at Sandia National Laboratories and Lawrence Livermore National Laboratory.« less

  11. Notes on beam dynamics in linear accelerators

    SciTech Connect

    Gluckstern, R.L.

    1980-09-01

    A collection of notes, on various aspects of beam dynamics in linear accelerators, which were produced by the author during five years (1975 to 1980) of consultation for the LASL Accelerator Technology (AT) Division and Medium-Energy Physics (MP) Division is presented.

  12. A microcomputer-controlled linear heater

    SciTech Connect

    Schuck, V.; Rahimi, S. )

    1991-10-01

    In this note the circuits and principles of operation of a relatively simple and inexpensive linear temperature ramp generator are described. The upper-temperature limit and the heating rate are controlled by an Apple II microcomputer. The temperature versus time is displayed on the screen and may be plotted by an {ital x}-{ital y} plotter.

  13. Linear and non-linear forced response of a conical, ducted, laminar premixed flame

    SciTech Connect

    Karimi, Nader; Brear, Michael J.; Jin, Seong-Ho; Monty, Jason P. [Department of Mechanical Engineering, University of Melbourne, Parkville, 3010 Vic. (Australia)

    2009-11-15

    This paper presents an experimental study on the dynamics of a ducted, conical, laminar premixed flame subjected to acoustic excitation of varying amplitudes. The flame transfer function is measured over a range of forcing frequencies and equivalence ratios. In keeping with previous works, the measured flame transfer function is in good agreement with that predicted by linear kinematic theory at low amplitudes of acoustic velocity excitation. However, a systematic departure from linear behaviour is observed as the amplitude of the velocity forcing upstream of the flame increases. This non-linearity is mostly in the phase of the transfer function and manifests itself as a roughly constant phase at high forcing amplitude. Nonetheless, as predicted by non-linear kinematic arguments, the response always remains close to linear at low forcing frequencies, regardless of the forcing amplitude. The origin of this phase behaviour is then sought through optical data post-processing. (author)

  14. International Linear Collider-A Technical Progress Report (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: International Linear Collider-A Technical Progress Report Citation Details In-Document Search Title: International Linear Collider-A Technical Progress Report The ...

  15. MHK Technologies/Ocean Current Linear Turbine | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    Current Linear Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Ocean Current Linear Turbine.jpg Technology Profile Primary...

  16. Updates to the International Linear Collider Damping Rings Baseline...

    Office of Scientific and Technical Information (OSTI)

    Updates to the International Linear Collider Damping Rings Baseline Design Citation Details In-Document Search Title: Updates to the International Linear Collider Damping Rings...

  17. A Linear Theory of Microwave Instability in Electron Storage...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: A Linear Theory of Microwave Instability in Electron Storage Rings Citation Details In-Document Search Title: A Linear Theory of Microwave Instability in Electron...

  18. Neutrino mass, dark energy, and the linear growth factor (Journal...

    Office of Scientific and Technical Information (OSTI)

    dark energy, and the linear growth factor Citation Details In-Document Search Title: Neutrino mass, dark energy, and the linear growth factor We study the degeneracies between ...

  19. Weatherization Innovation Pilot Program Fact Sheet- Ohio Success Story

    Energy.gov [DOE]

    Case Study with WIPP program overview, documenting the success of the People Working Cooperatively/WIPP partnership.

  20. Phase and Radial Motion in Ion Linear Accelerators

    Energy Science and Technology Software Center

    2007-03-29

    Parmila is an ion-linac particle-dynamics code. The name comes from the phrase, "Phase and Radial Motion in Ion Linear Accelerators." The code generates DTL, CCDTL, and CCL accelerating cells and, using a "drift-kick" method, transforms the beam, represented by a collection of particles, through the linac. The code includes a 2-D and 3-D space-charge calculations. Parmila uses data generated by the Poisson Superfish postprocessor SEC. This version of Parmila was written by Harunori Takeda andmore » was supported through Feb. 2006 by James H. Billen. Setup installs executable programs Parmila.EXE, Lingraf.EXE, and ReadPMI.EXE in the LANL directory. The directory LANL\\Examples\\Parmila contains several subdirectories with sample files for Parmila.« less

  1. Case Studies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog...

  2. Enlighten Your Research Global Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Enlighten Your Research Global Program Science Engagement Move your data Programs & Workshops CrossConnects Workshop Series Operating Innovative Networks Workshop Series Enlighten Your Research Global Program Science Requirements Reviews Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Enlighten Your Research

  3. Non-Linear Seismic Soil Structure Interaction (SSI) Method for Developing Non-Linear Seismic SSI Analysis Techniques

    Energy.gov [DOE]

    Non-Linear Seismic Soil Structure Interaction (SSI) Method for Developing Non-Linear Seismic SSI Analysis Techniques Justin Coleman, P.E. October 25th, 2011

  4. Damping of linear waves via ionization and recombination in homogeneous plasmas

    SciTech Connect

    Dodin, I. Y.; Fisch, N. J.

    2010-11-15

    An oscillation-center model is proposed that analytically describes transformation of an arbitrary homogeneous linear wave at gradual ionization and recombination in homogeneous plasma. For the case when either of the processes dominates, general adiabatic invariants are found, from which the wave energy is derived as a function of the frequency.

  5. Enhanced dielectric-wall linear accelerator

    DOEpatents

    Sampayan, S.E.; Caporaso, G.J.; Kirbie, H.C.

    1998-09-22

    A dielectric-wall linear accelerator is enhanced by a high-voltage, fast e-time switch that includes a pair of electrodes between which are laminated alternating layers of isolated conductors and insulators. A high voltage is placed between the electrodes sufficient to stress the voltage breakdown of the insulator on command. A light trigger, such as a laser, is focused along at least one line along the edge surface of the laminated alternating layers of isolated conductors and insulators extending between the electrodes. The laser is energized to initiate a surface breakdown by a fluence of photons, thus causing the electrical switch to close very promptly. Such insulators and lasers are incorporated in a dielectric wall linear accelerator with Blumlein modules, and phasing is controlled by adjusting the length of fiber optic cables that carry the laser light to the insulator surface. 6 figs.

  6. Noise in phase-preserving linear amplifiers

    SciTech Connect

    Pandey, Shashank; Jiang, Zhang; Combes, Joshua; Caves, Carlton M.

    2014-12-04

    The purpose of a phase-preserving linear amplifier is to make a small signal larger, so that it can be perceived by instruments incapable of resolving the original signal, while sacrificing as little as possible in signal-to-noise. Quantum mechanics limits how well this can be done: the noise added by the amplifier, referred to the input, must be at least half a quantum at the operating frequency. This well-known quantum limit only constrains the second moments of the added noise. Here we provide the quantum constraints on the entire distribution of added noise: any phasepreserving linear amplifier is equivalent to a parametric amplifier with a physical state ? for the ancillary mode; ? determines the properties of the added noise.

  7. Tilted panel linear echelon solar collector

    SciTech Connect

    Appeldorn, R.H.; Vanderwerf, D.F.

    1989-01-31

    A solar concentrator is described for directing incident solar radiation to a linear focus, comprising: a planar base surface being positioned at an angle phi, which is greater than 0/sup 0/ but less than 90/sup 0/, with respect to a direction which is normal to the incident solar radiation; a plurality of planar reflective elements set along the planar base surface each of which is positioned at an angle ..cap alpha..' with respect to the planar base surface and which varies for each of the planar reflective elements to reflect the incident solar radiation to the linear focus, the plurality of planar reflective elements being separated from each other by substantially planar riser elements, the riser elements being substantially normal to the planar base surface, each of the planar reflective elements making an angle ..cap alpha.. with respect to the direction which is normal to the incident solar radiation.

  8. Enhanced dielectric-wall linear accelerator

    DOEpatents

    Sampayan, Stephen E.; Caporaso, George J.; Kirbie, Hugh C.

    1998-01-01

    A dielectric-wall linear accelerator is enhanced by a high-voltage, fast e-time switch that includes a pair of electrodes between which are laminated alternating layers of isolated conductors and insulators. A high voltage is placed between the electrodes sufficient to stress the voltage breakdown of the insulator on command. A light trigger, such as a laser, is focused along at least one line along the edge surface of the laminated alternating layers of isolated conductors and insulators extending between the electrodes. The laser is energized to initiate a surface breakdown by a fluence of photons, thus causing the electrical switch to close very promptly. Such insulators and lasers are incorporated in a dielectric wall linear accelerator with Blumlein modules, and phasing is controlled by adjusting the length of fiber optic cables that carry the laser light to the insulator surface.

  9. Building America Case Study: Whole-House Solutions for Existing Homes: Greenbelt Homes, Inc. Pilot Retrofit Program; Whole-House Solutions for Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect

    2015-06-01

    In the fall of 2010, a multiyear pilot energy efficiency retrofit project was undertaken by Greenbelt Homes, Inc, (GHI) a 1,566 home cooperative of circa 1930 and 1940 homes in Greenbelt, Maryland. GHI established this pilot project to serve as a basis for decision making for the rollout of a decade-long community-wide upgrade program that will incorporate energy efficiency improvements to the building envelope and mechanical equipment. With the community upgrade fully funded by the cooperative through their membership without outside subsidies, this project presents a unique opportunity to evaluate and prioritize the wide-range of benefits of high-performance retrofits based on member experience with and acceptance of the retrofit measures implemented during the pilot project. Addressing the complex interactions between benefits, trade-offs, construction methods, project management implications, realistic upfront costs, financing, and other considerations, serves as a case study for energy retrofit projects to include high-performance technologies based on the long-term value to the homeowner. The pilot project focused on identifying the added costs and energy savings benefits of improvements. Phase 1: baseline evaluation for a representative set of 28 homes sited in seven buildings; Phase 2: installation of the building envelope improvements and continued monitoring of the energy consumption for the heating season and energy simulations supporting recommendations for HVAC and water heating upgrades to be implemented in Phase 3.

  10. Inpainting with sparse linear combinations of exemplars

    SciTech Connect

    Wohlberg, Brendt

    2008-01-01

    We introduce a new exemplar-based inpainting algorithm based on representing the region to be inpainted as a sparse linear combination of blocks extracted from similar parts of the image being inpainted. This method is conceptually simple, being computed by functional minimization, and avoids the complexity of correctly ordering the filling in of missing regions of other exemplar-based methods. Initial performance comparisons on small inpainting regions indicate that this method provides similar or better performance than other recent methods.

  11. Radio frequency quadrupole resonator for linear accelerator

    DOEpatents

    Moretti, Alfred

    1985-01-01

    An RFQ resonator for a linear accelerator having a reduced level of interfering modes and producing a quadrupole mode for focusing, bunching and accelerating beams of heavy charged particles, with the construction being characterized by four elongated resonating rods within a cylinder with the rods being alternately shorted and open electrically to the shell at common ends of the rods to provide an LC parallel resonant circuit when activated by a magnetic field transverse to the longitudinal axis.

  12. High gradient accelerators for linear light sources

    SciTech Connect

    Barletta, W.A.

    1988-09-26

    Ultra-high gradient radio frequency linacs powered by relativistic klystrons appear to be able to provide compact sources of radiation at XUV and soft x-ray wavelengths with a duration of 1 picosecond or less. This paper provides a tutorial review of the physics applicable to scaling the present experience of the accelerator community to the regime applicable to compact linear light sources. 22 refs., 11 figs., 21 tabs.

  13. The Next Linear Collider: NLC2001

    SciTech Connect

    D. Burke et al.

    2002-01-14

    Recent studies in elementary particle physics have made the need for an e{sup +}e{sup -} linear collider able to reach energies of 500 GeV and above with high luminosity more compelling than ever [1]. Observations and measurements completed in the last five years at the SLC (SLAC), LEP (CERN), and the Tevatron (FNAL) can be explained only by the existence of at least one particle or interaction that has not yet been directly observed in experiment. The Higgs boson of the Standard Model could be that particle. The data point strongly to a mass for the Higgs boson that is just beyond the reach of existing colliders. This brings great urgency and excitement to the potential for discovery at the upgraded Tevatron early in this decade, and almost assures that later experiments at the LHC will find new physics. But the next generation of experiments to be mounted by the world-wide particle physics community must not only find this new physics, they must find out what it is. These experiments must also define the next important threshold in energy. The need is to understand physics at the TeV energy scale as well as the physics at the 100-GeV energy scale is now understood. This will require both the LHC and a companion linear electron-positron collider. A first Zeroth-Order Design Report (ZDR) [2] for a second-generation electron-positron linear collider, the Next Linear Collider (NLC), was published five years ago. The NLC design is based on a high-frequency room-temperature rf accelerator. Its goal is exploration of elementary particle physics at the TeV center-of-mass energy, while learning how to design and build colliders at still higher energies. Many advances in accelerator technologies and improvements in the design of the NLC have been made since 1996. This Report is a brief update of the ZDR.

  14. Communications circuit including a linear quadratic estimator

    SciTech Connect

    Ferguson, Dennis D.

    2015-07-07

    A circuit includes a linear quadratic estimator (LQE) configured to receive a plurality of measurements a signal. The LQE is configured to weight the measurements based on their respective uncertainties to produce weighted averages. The circuit further includes a controller coupled to the LQE and configured to selectively adjust at least one data link parameter associated with a communication channel in response to receiving the weighted averages.

  15. Linearity Testing of Photovoltaic Cells (Poster)

    SciTech Connect

    Emery, K.; Winter, S.; Pinegar, S.; Nalley, D.

    2006-05-01

    International PV standards require that the short-circuit current or response of the reference device be linear with total irradiance. Accredited calibration laboratories can not assume that their reference device is linear unless another accredited laboratory has performed the measurement. The NREL PV performance laboratory is ISO 17025 accredited for primary reference cell, secondary reference cell and secondary module calibrations. Limited labor resources necessitated the development of a technique to determine linearity without taking significant labor or technical skill. The two-lamp method is insensitive to the spectrum of the light or spatial nonuniformity changing as the irradiance is varied. It does assume that the temperature does not change with irradiance and that the light-source spectrum resembles the solar spectrum. This requirement is only because nonlinear mechanisms in the photo-current are wavelength dependent. A laser for example may show the same device as linear or very nonlinear with irradiance depending on the wavelength. The two-lamp method assumes that the lamp intensities when individually irradiating the sample are the same as when both lamps irradiate the sample. The presence of room light only limits the lowest irradiance that can be evaluated. Unlike other methods, the two-lamp method does not allow the current to be corrected for nonlinear effects. The most appealing aspect of the two-lamp method when compared with other methods for a high-volume calibration laboratory is that it is fast and does not require operator intervention to change the irradiances and is difficult for the operator to make mistakes that would affect the outcome.

  16. Linearity Testing of Photovoltaic Cells: Preprint

    SciTech Connect

    Emery, K.; Winter, S.; Pinegar, S.; Nalley D.

    2006-05-01

    Photovoltaic devices are rated in terms of their peak power with respect to a specific spectrum, total irradiance, and temperature. To rate photovoltaic devices, a reference detector is required whose response is linear with total irradiance. This paper describes a procedure to determine the linearity of the short-circuit current (Isc) versus the total irradiance (Etot) by illuminating a reference cell with two lamps. A device is linear if the current measured with both lamps illuminating the cell is the same as the sum of the currents with each lamp illuminating the cell. The two-lamp method is insensitive to the light spectra or spatial nonuniformity changing with irradiance. The two-lamp method is rapid, easy to implement, and does not require operator intervention to change the irradiances. The presence of room light only limits the lowest irradiance that can be evaluated. Unlike other methods, the two-lamp method does not allow the current to be corrected for nonlinear effects.

  17. Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National

  18. Case No. VBU-0077

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    No. VBU-0077 October 25, 2001 DECISION AND ORDER OF THE DEPARTMENT OF ENERGY Decision of the Director Name of Petitioner: Ronald E. Timm Date of Filing: September 25, 2001 Case Number: VBU-0077 Ronald E. Timm (the Complainant), the President of RETA Security, a Department of Energy (DOE) subcontractor, appeals the dismissal of his whistleblower complaint filed under 10 C.F.R. Part 708, the DOE Contractor Employee Protection Program. On September 10, 2001, the Employee Concerns Program Manager at

  19. Towards a Future Linear Collider and The Linear Collider Studies at CERN

    ScienceCinema

    None

    2016-07-12

    During the week 18-22 October, more than 400 physicists will meet at CERN and in the CICG (International Conference Centre Geneva) to review the global progress towards a future linear collider. The 2010 International Workshop on Linear Colliders will study the physics, detectors and accelerator complex of a linear collider covering both the CLIC and ILC options. Among the topics presented and discussed will be the progress towards the CLIC Conceptual Design Report in 2011, the ILC Technical Design Report in 2012, physics and detector studies linked to these reports, and an increasing numbers of common working group activities. The seminar will give an overview of these topics and also CERN’s linear collider studies, focusing on current activities and initial plans for the period 2011-16. n.b: The Council Chamber is also reserved for this colloquium with a live transmission from the Main Auditorium.

  20. Towards a Future Linear Collider and The Linear Collider Studies at CERN

    ScienceCinema

    None

    2011-10-06

    During the week 18-22 October, more than 400 physicists will meet at CERN and in the CICG (International Conference Centre Geneva) to review the global progress towards a future linear collider. The 2010 International Workshop on Linear Colliders will study the physics, detectors and accelerator complex of a linear collider covering both the CLIC and ILC options. Among the topics presented and discussed will be the progress towards the CLIC Conceptual Design Report in 2011, the ILC Technical Design Report in 2012, physics and detector studies linked to these reports, and an increasing numbers of common working group activities. The seminar will give an overview of these topics and also CERN?s linear collider studies, focusing on current activities and initial plans for the period 2011-16. n.b: The Council Chamber is also reserved for this colloquium with a live transmission from the Main Auditorium.

  1. Intersecting nonextreme p-branes and linear dilaton background

    SciTech Connect

    Chen, C.-M.; Gal'tsov, Dmitri V.; Ohta, Nobuyoshi

    2005-08-15

    We construct the general static solution to the supergravity action containing gravity, the dilaton and a set of antisymmetric forms describing the intersecting branes delocalized in the relative transverse dimensions. The solution is obtained by reducing the system to a set of separate Liouville equations (the intersection rules implying the separability); it contains the maximal number of free parameters corresponding to the rank of the differential equations. Imposing the requirement of the absence of naked singularities, we show that the general configurations are restricted to two and only two classes: the usual asymptotically flat intersecting branes, and the intersecting branes some of which are asymptotically flat and some approach the linear dilaton background at infinity. In both cases the configurations are black. These are supposed to be relevant for the description of the thermal phase of the QFT's in the corresponding Domain-Wall/QFT duality.

  2. IMPACTS: Industrial Technologies Program, Summary of Program...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    IMPACTS: Industrial Technologies Program, Summary of Program Results for CY2009 IMPACTS: Industrial Technologies Program, Summary of Program Results for CY2009 ...

  3. Light Water Reactor Sustainability Program - Integrated Program...

    Energy Saver

    Light Water Reactor Sustainability Program - Integrated Program Plan Light Water Reactor Sustainability Program - Integrated Program Plan The Light Water Reactor Sustainability ...

  4. Counterintelligence Program

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1992-09-04

    To establish the policies, procedures, and specific responsibilities for the Department of Energy (DOE) Counterintelligence (CI) Program. This directive does not cancel any other directive.

  5. Programming Stage

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1997-05-21

    This chapter addresses plans for the acquisition and installation of operating environment hardware and software and design of a training program.

  6. Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) Network programs, we provide STEM role models...

  7. exercise program

    National Nuclear Security Administration (NNSA)

    and dispose of many different hazardous substances, including radioactive materials, toxic chemicals, and biological agents and toxins.

    There are a few programs NNSA uses...

  8. Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research....

  9. Volunteer Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    National VolunteerMatch Retired and Senior Volunteer Program United Way of Northern New Mexico United Way of Santa Fe County Giving Employee Giving Campaign Holiday Food Drive...

  10. Special Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and Application Center for Hydrogen Energy Research Programs ARPA-E Basic Energy Sciences ... Sea State Contour) Code Online Abstracts and Reports Water Power Personnel ...

  11. Counterintelligence Program

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2004-12-10

    The Order establishes Counterintelligence Program requirements and responsibilities for the Department of Energy, including the National Nuclear Security Administration. Supersedes DOE 5670.3.

  12. Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Description Inspiring girls to recognize their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) ...

  13. Special Programs

    Office of Energy Efficiency and Renewable Energy (EERE)

    Headquarters Human Resources Operations promotes a variety of hiring flexibilities for managers to attract a diverse workforce, from Student Internship Program opportunities (Pathways), Veteran...

  14. NREL Develops Diagnostic Test Cases To Improve Building Energy...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Develops Diagnostic Test Cases To Improve Building Energy Simulation Programs The National ... research groups developed a set of diagnostic test cases for building energy simulations. ...

  15. HMMER3 Case Study

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    HMMER3 Case Study HMMER3 Case Study Background HMMER3 [1] is a bioinformatics application used to quickly identify protein sequences which are statistically similar to a desired pattern. This functionality is used at scale in genome sequencing pipelines to annotate the content of new genomes; the Joint Genome Institute uses 7 million CPU hours annually to run HMMER3 applications. Under the hood, HMMER3 uses dynamic programming to solve a sequence alignment problem in a similar manner to the

  16. Student Internship Programs Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on experience supporting educational progress in their selected scientific or professional fields. The most significant impact of these internship experiences is observed in the intellectual growth experienced by the participants. Student interns are able to appreciate the practical value of their education efforts in their

  17. Program Description | Robotics Internship Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    March 4, 2016. Apply Now for the Robotics Internship About the Internship Program Description Start of Appointment Renewal of Appointment End of Appointment Stipend Information...

  18. Spherically symmetric analysis on open FLRW solution in non-linear massive gravity

    SciTech Connect

    Chiang, Chien-I; Izumi, Keisuke; Chen, Pisin E-mail: izumi@phys.ntu.edu.tw

    2012-12-01

    We study non-linear massive gravity in the spherically symmetric context. Our main motivation is to investigate the effect of helicity-0 mode which remains elusive after analysis of cosmological perturbation around an open Friedmann-Lemaitre-Robertson-Walker (FLRW) universe. The non-linear form of the effective energy-momentum tensor stemming from the mass term is derived for the spherically symmetric case. Only in the special case where the area of the two sphere is not deviated away from the FLRW universe, the effective energy momentum tensor becomes completely the same as that of cosmological constant. This opens a window for discriminating the non-linear massive gravity from general relativity (GR). Indeed, by further solving these spherically symmetric gravitational equations of motion in vacuum to the linear order, we obtain a solution which has an arbitrary time-dependent parameter. In GR, this parameter is a constant and corresponds to the mass of a star. Our result means that Birkhoff's theorem no longer holds in the non-linear massive gravity and suggests that energy can probably be emitted superluminously (with infinite speed) on the self-accelerating background by the helicity-0 mode, which could be a potential plague of this theory.

  19. Microfabricated linear Paul-Straubel ion trap

    DOEpatents

    Mangan, Michael A.; Blain, Matthew G.; Tigges, Chris P.; Linker, Kevin L.

    2011-04-19

    An array of microfabricated linear Paul-Straubel ion traps can be used for mass spectrometric applications. Each ion trap comprises two parallel inner RF electrodes and two parallel outer DC control electrodes symmetric about a central trap axis and suspended over an opening in a substrate. Neighboring ion traps in the array can share a common outer DC control electrode. The ions confined transversely by an RF quadrupole electric field potential well on the ion trap axis. The array can trap a wide array of ions.

  20. Rf power sources for linear colliders

    SciTech Connect

    Allen, M.A.; Callin, R.S.; Caryotakis, G.; Deruyter, H.; Eppley, K.R.; Fant, K.S.; Farkas, Z.D.; Fowkes, W.R.; Hoag, H.A.; Feinstein, J.; Ko, K.; Koontz, R.F.; Kroll, N.M.; Lavine, T.L.; Lee, T.G.; Loew, G.A.; Miller, R.H.; Nelson, E.M.; Ruth, R.D.; Vlieks, A.E.; Wang, J.W.; Wilson, P.B. ); Boyd, J.K.; Houk, T.; Ryne, R.D.; Westenskow, G.A.; Yu, S.S. (Lawrence Live

    1990-06-01

    The next generation of linear colliders requires peak power sources of over 200 MW per meter at frequencies above 10 GHz at pulse widths of less than 100 nsec. Several power sources are under active development, including a conventional klystron with rf pulse compression, a relativistic klystron (RK) and a crossed-field amplifier. Power from one of these has energized a 0.5 meter two- section High Gradient Accelerator (HGA) and accelerated a beam at over 80 MeV meter. Results of tests with these experimental devices are presented here.

  1. Micromechanism linear actuator with capillary force sealing

    DOEpatents

    Sniegowski, Jeffry J.

    1997-01-01

    A class of micromachine linear actuators whose function is based on gas driven pistons in which capillary forces are used to seal the gas behind the piston. The capillary forces also increase the amount of force transmitted from the gas pressure to the piston. In a major subclass of such devices, the gas bubble is produced by thermal vaporization of a working fluid. Because of their dependence on capillary forces for sealing, such devices are only practical on the sub-mm size scale, but in that regime they produce very large force times distance (total work) values.

  2. Optima Program Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Optima Program Overview John Farrell Optima Stakeholder Listening Day June 16, 2015 2 BIOENERGY TECHNOLOGIES OFFICE VEHICLE TECHNOLOGIES OFFICE multi office multi lab multi year initiative what is Optima? approach: co-optimize fuels and engines accelerate, coordinate, and focus efficiency and displacement 30% per vehicle petroleum reduction via 4 source: EIA 2014 reference case efficiency 7-14% beyond BAU 16 billion gallons advanced biofuel Optima research thrust 1 Provide scientific basis to

  3. BerkeleyGW Case Study

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    BerkeleyGW Case Study BerkeleyGW Case Study Code Description and Science Problem BerkeleyGW is a Materials Science application for calculating the excited state properties of materials such as band gaps, band structures, absoprtion spectroscopy, photoemission spectroscopy and more. It requires as input the Kohn-Sham orbitals and energies from a DFT code like Quantum ESPRESSO, PARATEC, PARSEC etc. Like such DFT codes, it is heavily depedent on FFTs, Dense Linear algebra and tensor contraction

  4. Limits on linearity of missile allocation optimization

    SciTech Connect

    Canavan, G.H.

    1997-12-01

    Optimizations of missile allocation based on linearized exchange equations produce accurate allocations, but the limits of validity of the linearization are not known. These limits are explored in the context of the upload of weapons by one side to initially small, equal forces of vulnerable and survivable weapons. The analysis compares analytic and numerical optimizations and stability induces based on aggregated interactions of the two missile forces, the first and second strikes they could deliver, and they resulting costs. This note discusses the costs and stability indices induced by unilateral uploading of weapons to an initially symmetrical low force configuration. These limits are quantified for forces with a few hundred missiles by comparing analytic and numerical optimizations of first strike costs. For forces of 100 vulnerable and 100 survivable missiles on each side, the analytic optimization agrees closely with the numerical solution. For 200 vulnerable and 200 survivable missiles on each side, the analytic optimization agrees with the induces to within about 10%, but disagrees with the allocation of the side with more weapons by about 50%. The disagreement comes from the interaction of the possession of more weapons with the shift of allocation from missiles to value that they induce.

  5. Linear dimensions and volumes of human lungs

    DOE PAGES [OSTI]

    Hickman, David P.

    2012-03-30

    TOTAL LUNG Capacity is defined as “the inspiratory capacity plus the functional residual capacity; the volume of air contained in the lungs at the end of a maximal inspiration; also equals vital capacity plus residual volume” (from MediLexicon.com). Within the Results and Discussion section of their April 2012 Health Physics paper, Kramer et al. briefly noted that the lungs of their experimental subjects were “not fully inflated.” By definition and failure to obtain maximal inspiration, Kramer et. al. did not measure Total Lung Capacity (TLC). The TLC equation generated from this work will tend to underestimate TLC and does notmore » improve or update total lung capacity data provided by ICRP and others. Likewise, the five linear measurements performed by Kramer et. al. are only representative of the conditions of the measurement (i.e., not at-rest volume, but not fully inflated either). While there was significant work performed and the data are interesting, the data does not represent a maximal situation, a minimal situation, or an at-rest situation. Moreover, while interesting, the linear data generated by this study is limited by the conditions of the experiment and may not be fully comparative with other lung or inspiratory parameters, measures, or physical dimensions.« less

  6. Terahertz-driven linear electron acceleration

    SciTech Connect

    Nanni, Emilio A.; Huang, Wenqian R.; Hong, Kyung-Han; Ravi, Koustuban; Fallahi, Arya; Moriena, Gustavo; Dwayne Miller, R. J.; Kärtner, Franz X.

    2015-10-06

    The cost, size and availability of electron accelerators are dominated by the achievable accelerating gradient. Conventional high-brightness radio-frequency accelerating structures operate with 30–50 MeVm-1 gradients. Electron accelerators driven with optical or infrared sources have demonstrated accelerating gradients orders of magnitude above that achievable with conventional radio-frequency structures. However, laser-driven wakefield accelerators require intense femtosecond sources and direct laser-driven accelerators suffer from low bunch charge, sub-micron tolerances and sub-femtosecond timing requirements due to the short wavelength of operation. Here we demonstrate linear acceleration of electrons with keV energy gain using optically generated terahertz pulses. Terahertz-driven accelerating structures enable high-gradient electron/proton accelerators with simple accelerating structures, high repetition rates and significant charge per bunch. As a result, these ultra-compact terahertz accelerators with extremely short electron bunches hold great potential to have a transformative impact for free electron lasers, linear colliders, ultrafast electron diffraction, X-ray science and medical therapy with X-rays and electron beams.

  7. Terahertz-driven linear electron acceleration

    DOE PAGES [OSTI]

    Nanni, Emilio A.; Huang, Wenqian R.; Hong, Kyung-Han; Ravi, Koustuban; Fallahi, Arya; Moriena, Gustavo; Dwayne Miller, R. J.; Kärtner, Franz X.

    2015-10-06

    The cost, size and availability of electron accelerators are dominated by the achievable accelerating gradient. Conventional high-brightness radio-frequency accelerating structures operate with 30–50 MeVm-1 gradients. Electron accelerators driven with optical or infrared sources have demonstrated accelerating gradients orders of magnitude above that achievable with conventional radio-frequency structures. However, laser-driven wakefield accelerators require intense femtosecond sources and direct laser-driven accelerators suffer from low bunch charge, sub-micron tolerances and sub-femtosecond timing requirements due to the short wavelength of operation. Here we demonstrate linear acceleration of electrons with keV energy gain using optically generated terahertz pulses. Terahertz-driven accelerating structures enable high-gradient electron/proton acceleratorsmore » with simple accelerating structures, high repetition rates and significant charge per bunch. As a result, these ultra-compact terahertz accelerators with extremely short electron bunches hold great potential to have a transformative impact for free electron lasers, linear colliders, ultrafast electron diffraction, X-ray science and medical therapy with X-rays and electron beams.« less

  8. Geothermal Case Studies

    DOE Data Explorer

    Young, Katherine

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  9. Geothermal Case Studies

    DOE Data Explorer

    Young, Katherine

    2014-09-30

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  10. Program Overview

    Energy.gov [DOE]

    The culture of the DOE community will be based on standards. Technical standards will formally integrate part of all DOE facility, program and project activities. The DOE will be recognized as a...

  11. Integrated Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Review (IPR) Quarterly Business Review (QBR) Access to Capital Debt Management July 2013 Aug. 2013 Sept. 2013 Oct. 2013 Nov. 2013 Dec. 2013 Jan. 2014 Feb. 2014 March...

  12. Deconvolution Program

    Energy Science and Technology Software Center

    1999-02-18

    The program is suitable for a lot of applications in applied mathematics, experimental physics, signal analytical system and some engineering applications range i.e. deconvolution spectrum, signal analysis and system property analysis etc.

  13. Programming models

    SciTech Connect

    Daniel, David J; Mc Pherson, Allen; Thorp, John R; Barrett, Richard; Clay, Robert; De Supinski, Bronis; Dube, Evi; Heroux, Mike; Janssen, Curtis; Langer, Steve; Laros, Jim

    2011-01-14

    A programming model is a set of software technologies that support the expression of algorithms and provide applications with an abstract representation of the capabilities of the underlying hardware architecture. The primary goals are productivity, portability and performance.

  14. Quality Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... for Preparing QA Project Plans." 8.4 American Society of Mechanical Engineers (ASME)NQA-1, "Quality Assurance Program Requirements for Nuclear Facilities." 8.5 American Nuclear ...

  15. Science Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The focal point for basic and applied R&D programs with a primary focus on energy but also encompassing medical, biotechnology, high-energy physics, and advanced scientific ...

  16. Program Analyst

    Energy.gov [DOE]

    A successful candidate in this position will serve as an Program Analyst for the System Operations team in the area of regulatory compliance. The successful candidate will also become a subject...

  17. Volunteer Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Volunteer Program Volunteer Program Our good neighbor pledge includes active employee engagement in our communities through volunteering. More than 3,000 current and retired Lab employees have logged more than 1.8 million volunteer hours since 2007. August 19, 2015 Los Alamos National Laboratory employee volunteers with Mountain Canine Corps Lab employee Debbi Miller volunteers for the Mountain Canine Corps with her search and rescue dogs. She also volunteers with another search and rescue

  18. Program Managers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Managers Program Managers Enabling remarkable discoveries and tools that transform our understanding of energy and matter and advance national, economic, and energy security. Advanced Scientific Computing Applied Mathematics: Pieter Swart, T-5 Computer Science: Pat McCormick, CCS-7 Computational Partnerships: Galen Shipman, CCS-7 Basic Energy Sciences Materials Sciences & Engineering: Toni Taylor, ADCLES-DO CINT National User Facility: Alex Lacerda, MPA-CINT (Acting Director)

  19. Program Summaries

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Summaries Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) Community Resources Program Summaries Brochures Reports Accomplishments Presentations BES and Congress Science for Energy Flow Seeing Matter Nano for Energy Scale of Things Chart Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington,

  20. Educational Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Educational Programs Educational Programs A collaboration between Los Alamos National Laboratory and the University of California at San Diego (UCSD) Jacobs School of Engineering Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff Assistant Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email There are two educational components to the Engineering Institute. The Los Alamos Dynamic

  1. Case Studies

    Energy.gov [DOE]

    The following case studies are examples of integrating renewable energy into Federal new construction and major renovation projects. Additional renewable energy case studies are also available.

  2. Statistical properties of linear antenna impedance in an electrically large cavity - Antennas and Propagation, IEEE Transactions on

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 51, NO. 5, MAY 2003 Statistical Properties of Linear Antenna Impedance in an Electrically Large Cavity Larry K. Warne, Kelvin S. H. Lee, H. Gerald Hudson, William A. Johnson, Senior Member, IEEE, Roy E. Jorgenson, Member, IEEE, and Stephen L. Stronach Abstract-This paper presents models and measurements of linear antenna input impedance in resonant cavities at high frequencies. Results are presented for both the case where the cavity is

  3. Shortcuts to adiabaticity from linear response theory

    SciTech Connect

    Acconcia, Thiago V.; Bonança, Marcus V. S.; Deffner, Sebastian

    2015-10-23

    A shortcut to adiabaticity is a finite-time process that produces the same final state as would result from infinitely slow driving. We show that such shortcuts can be found for weak perturbations from linear response theory. Moreover, with the help of phenomenological response functions, a simple expression for the excess work is found—quantifying the nonequilibrium excitations. For two specific examples, i.e., the quantum parametric oscillator and the spin 1/2 in a time-dependent magnetic field, we show that finite-time zeros of the excess work indicate the existence of shortcuts. We finally propose a degenerate family of protocols, which facilitates shortcuts to adiabaticity for specific and very short driving times.

  4. Radio frequency focused interdigital linear accelerator

    DOEpatents

    Swenson, Donald A.; Starling, W. Joel

    2006-08-29

    An interdigital (Wideroe) linear accelerator employing drift tubes, and associated support stems that couple to both the longitudinal and support stem electromagnetic fields of the linac, creating rf quadrupole fields along the axis of the linac to provide transverse focusing for the particle beam. Each drift tube comprises two separate electrodes operating at different electrical potentials as determined by cavity rf fields. Each electrode supports two fingers, pointing towards the opposite end of the drift tube, forming a four-finger geometry that produces an rf quadrupole field distribution along its axis. The fundamental periodicity of the structure is equal to one half of the particle wavelength .beta..lamda., where .beta. is the particle velocity in units of the velocity of light and .lamda. is the free space wavelength of the rf. Particles are accelerated in the gaps between drift tubes. The particle beam is focused in regions inside the drift tubes.

  5. TLD linearity vs. beam energy and modality

    SciTech Connect

    Troncalli, Andrew J.; Chapman, Jane

    2002-12-31

    Thermoluminescent dosimetry (TLD) is considered to be a valuable dosimetric tool in determining patient dose. Lithium fluoride doped with magnesium and titanium (TLD-100) is widely used, as it does not display widely divergent energy dependence. For many years, we have known that TLD-100 shows supralinearity to dose. In a radiotherapy clinic, there are multiple energies and modality beams. This work investigates whether individual linearity corrections must be used for each beam or whether a single correction can be applied to all beams. The response of TLD as a function of dose was measured from 25 cGy to 1000 cGy on both electrons and photons from 6 to 18 MeV. This work shows that, within our measurement uncertainty, TLD-100 exhibits supralinearity at all megavoltage energies and modalities.

  6. Faraday rotation assisted by linearly polarized light

    SciTech Connect

    Choi, Jai Min; Kim, Jang Myun; Cho, D.

    2007-11-15

    We demonstrate a type of chiral effect of an atomic medium. Polarization rotation of a probe beam is observed only when both a magnetic field and a linearly polarized coupling beam are present. We compare it with other chiral effects like optical activity, the Faraday effect, and the optically induced Faraday effect from the viewpoint of spatial inversion and time reversal transformations. As a theoretical model we consider a five-level configuration involving the cesium D2 transition. We use spin-polarized cold cesium atoms trapped in a magneto-optical trap to measure the polarization rotation versus probe detuning. The result shows reasonable agreement with a calculation from the master equation of the five-level configuration.

  7. Shortcuts to adiabaticity from linear response theory

    DOE PAGES [OSTI]

    Acconcia, Thiago V.; Bonança, Marcus V. S.; Deffner, Sebastian

    2015-10-23

    A shortcut to adiabaticity is a finite-time process that produces the same final state as would result from infinitely slow driving. We show that such shortcuts can be found for weak perturbations from linear response theory. Moreover, with the help of phenomenological response functions, a simple expression for the excess work is found—quantifying the nonequilibrium excitations. For two specific examples, i.e., the quantum parametric oscillator and the spin 1/2 in a time-dependent magnetic field, we show that finite-time zeros of the excess work indicate the existence of shortcuts. We finally propose a degenerate family of protocols, which facilitates shortcuts tomore » adiabaticity for specific and very short driving times.« less

  8. Sfermion precision measurements at a linear collider

    SciTech Connect

    A. Freitas et al.

    2003-09-25

    At future e{sup +}e{sup -} linear colliders, the event rates and clean signals of scalar fermion production--in particular for the scalar leptons--allow very precise measurements of their masses and couplings and the determination of their quantum numbers. Various methods are proposed for extracting these parameters from the data at the sfermion thresholds and in the continuum. At the same time, NLO radiative corrections and non-zero width effects have been calculated in order to match the experimental accuracy. The substantial mixing expected for the third generation sfermions opens up additional opportunities. Techniques are presented for determining potential CP-violating phases and for extracting tan {beta} from the stau sector, in particular at high values. The consequences of possible large mass differences in the stop and sbottom system are explored in dedicated analyses.

  9. Linear nozzle with tailored gas plumes

    DOEpatents

    Leon, David D.; Kozarek, Robert L.; Mansour, Adel; Chigier, Norman

    2001-01-01

    There is claimed a method for depositing fluid material from a linear nozzle in a substantially uniform manner across and along a surface. The method includes directing gaseous medium through said nozzle to provide a gaseous stream at the nozzle exit that entrains fluid material supplied to the nozzle, said gaseous stream being provided with a velocity profile across the nozzle width that compensates for the gaseous medium's tendency to assume an axisymmetric configuration after leaving the nozzle and before reaching the surface. There is also claimed a nozzle divided into respective side-by-side zones, or preferably chambers, through which a gaseous stream can be delivered in various velocity profiles across the width of said nozzle to compensate for the tendency of this gaseous medium to assume an axisymmetric configuration.

  10. Linear nozzle with tailored gas plumes

    DOEpatents

    Kozarek, Robert L.; Straub, William D.; Fischer, Joern E.; Leon, David D.

    2003-01-01

    There is claimed a method for depositing fluid material from a linear nozzle in a substantially uniform manner across and along a surface. The method includes directing gaseous medium through said nozzle to provide a gaseous stream at the nozzle exit that entrains fluid material supplied to the nozzle, said gaseous stream being provided with a velocity profile across the nozzle width that compensates for the gaseous medium's tendency to assume an axisymmetric configuration after leaving the nozzle and before reaching the surface. There is also claimed a nozzle divided into respective side-by-side zones, or preferably chambers, through which a gaseous stream can be delivered in various velocity profiles across the width of said nozzle to compensate for the tendency of this gaseous medium to assume an axisymmetric configuration.

  11. Linear-array systems for aerospace NDE

    SciTech Connect

    Smith, Robert A.; Willsher, Stephen J.; Bending, Jamie M.

    1999-12-02

    Rapid large-area inspection of composite structures for impact damage and multi-layered aluminum skins for corrosion has been a recognized priority for several years in both military and civil aerospace applications. Approaches to this requirement have followed two clearly different routes: the development of novel large-area inspection systems, and the enhancement of current ultrasonic or eddy-current methods to reduce inspection times. Ultrasonic inspection is possible with standard flaw detection equipment but the addition of a linear ultrasonic array could reduce inspection times considerably. In order to investigate their potential, 9-element and 17-element linear ultrasonic arrays for composites, and 64-element arrays for aluminum skins, have been developed to DERA specifications for use with the ANDSCAN area scanning system. A 5 m{sup 2} composite wing surface has been scanned with a scan resolution of approximately 3 mm in 6 hours. With subsequent software and hardware improvements all four composite wing surfaces (top/bottom, left/right) of a military fighter aircraft can potentially be inspected in less than a day. Array technology has been very widely used in the medical ultrasound field although rarely above 10 MHz, whereas lap-joint inspection requires a pulse center-frequency of 12 to 20 MHz in order to resolve the separate interfaces in the lap joint. A 128 mm-long multi-element array of 5 mmx2 mm ultrasonic elements for use with the ANDSCAN scanning software was produced to a DERA specification by an NDT manufacturer with experience in the medical imaging field. This paper analyses the performance of the transducers that have been produced and evaluates their use in scanning systems of different configurations.

  12. 2d PDE Linear Symmetric Matrix Solver

    Energy Science and Technology Software Center

    1983-10-01

    ICCG2 (Incomplete Cholesky factorized Conjugate Gradient algorithm for 2d symmetric problems) was developed to solve a linear symmetric matrix system arising from a 9-point discretization of two-dimensional elliptic and parabolic partial differential equations found in plasma physics applications, such as resistive MHD, spatial diffusive transport, and phase space transport (Fokker-Planck equation) problems. These problems share the common feature of being stiff and requiring implicit solution techniques. When these parabolic or elliptic PDE''s are discretized withmore » finite-difference or finite-element methods,the resulting matrix system is frequently of block-tridiagonal form. To use ICCG2, the discretization of the two-dimensional partial differential equation and its boundary conditions must result in a block-tridiagonal supermatrix composed of elementary tridiagonal matrices. The incomplete Cholesky conjugate gradient algorithm is used to solve the linear symmetric matrix equation. Loops are arranged to vectorize on the Cray1 with the CFT compiler, wherever possible. Recursive loops, which cannot be vectorized, are written for optimum scalar speed. For matrices lacking symmetry, ILUCG2 should be used. Similar methods in three dimensions are available in ICCG3 and ILUCG3. A general source containing extensions and macros, which must be processed by a pre-compiler to obtain the standard FORTRAN source, is provided along with the standard FORTRAN source because it is believed to be more readable. The pre-compiler is not included, but pre-compilation may be performed by a text editor as described in the UCRL-88746 Preprint.« less

  13. Application Program Interface for Engineering and Scientific Applications

    Energy Science and Technology Software Center

    2001-10-18

    An Application Program Interface (API) for engineering and scientific applications. This system allows application developers to write to a single uniform interface, obtaining access to all solvers in the Trilinos framwork. This includes linear solvers, eigensolvers, non-linear solvers, and time-dependent solvers.

  14. Evaluation Helps Pesticide Program Finish Project Four Years Sooner Than

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Estimated | Department of Energy Pesticide Program Finish Project Four Years Sooner Than Estimated Evaluation Helps Pesticide Program Finish Project Four Years Sooner Than Estimated This document from the U.S. EPA's Office of Pesticide Programs is part of the Case Study Series, and explains how "Evaluation Helps Pesticide Program Finish Project Four Years Sooner than Estimated." Pesticide Program Case Study (332.21 KB) More Documents & Publications Introduction to the Value of

  15. CALiPER Application Summary Report 19. LED Linear Pendants

    SciTech Connect

    none,

    2012-10-01

    Report 19 reviews the independently tested performance of nine LED linear pendants and also evaluates a collection of 11 linear pendant products available in both an LED and fluorescent version.

  16. Project Profile: Commercial Development of an Advanced Linear...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project Profile: Commercial Development of an Advanced Linear-Fresnel-Based CSP Concept SkyFuel logo SkyFuel, under the CSP R&D FOA, is developing a commercial linear-Fresnel-based ...

  17. Student Internship Programs Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    for a summer high school student to 75,000 for a Ph.D. student working full-time for a year. Program Coordinator: Scott Robbins Email: srobbins@lanl.gov Phone number: 663-5621...

  18. Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps |

    Energy Saver

    Department of Energy Replacements for Linear Fluorescent Lamps Text-Alternative Version: LED Replacements for Linear Fluorescent Lamps Below is the text-alternative version of the "LED Replacements for Linear Fluorescent Lamps" webcast, held June 20, 2011. Theresa Shoemaker: Welcome, ladies and gentlemen. I'm Terry Shoemaker with the Pacific Northwest National Laboratory, and I'd like to welcome you to today's webcast, "LED Replacements for Linear Fluorescent Lamps,"

  19. Postdoctoral Program Program Description The Postdoctoral (Postdoc...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Postdoctoral Program Program Description The Postdoctoral (Postdoc) Research program offers the opportunity for appointees to perform research in a robust scientific R&D...

  20. Machinist Pipeline/Apprentice Program Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled ...

  1. Governance of the International Linear Collider Project

    SciTech Connect

    Foster, B.; Barish, B.; Delahaye, J.P.; Dosselli, U.; Elsen, E.; Harrison, M.; Mnich, J.; Paterson, J.M.; Richard, F.; Stapnes, S.; Suzuki, A.; Wormser, G.; Yamada, S.; /KEK, Tsukuba

    2012-05-31

    Governance models for the International Linear Collider Project are examined in the light of experience from similar international projects around the world. Recommendations for one path which could be followed to realize the ILC successfully are outlined. The International Linear Collider (ILC) is a unique endeavour in particle physics; fully international from the outset, it has no 'host laboratory' to provide infrastructure and support. The realization of this project therefore presents unique challenges, in scientific, technical and political arenas. This document outlines the main questions that need to be answered if the ILC is to become a reality. It describes the methodology used to harness the wisdom displayed and lessons learned from current and previous large international projects. From this basis, it suggests both general principles and outlines a specific model to realize the ILC. It recognizes that there is no unique model for such a laboratory and that there are often several solutions to a particular problem. Nevertheless it proposes concrete solutions that the authors believe are currently the best choices in order to stimulate discussion and catalyze proposals as to how to bring the ILC project to fruition. The ILC Laboratory would be set up by international treaty and be governed by a strong Council to whom a Director General and an associated Directorate would report. Council would empower the Director General to give strong management to the project. It would take its decisions in a timely manner, giving appropriate weight to the financial contributions of the member states. The ILC Laboratory would be set up for a fixed term, capable of extension by agreement of all the partners. The construction of the machine would be based on a Work Breakdown Structure and value engineering and would have a common cash fund sufficiently large to allow the management flexibility to optimize the project's construction. Appropriate contingency, clearly

  2. Chapter 5: Long-term benefits analysis of EERE's Programs

    SciTech Connect

    None, None

    2009-01-18

    This chapter provides an overview of the modeling approach used in MARKAL-GPRA05 to evaluate the benefits of EERE R&D programs and technologies. The program benefits reported in this section result from comparisons of each Program Case to the Baseline Case, as modeled in MARKAL-GPRA05.

  3. Program Year 2008 State Energy Program Formula

    Energy.gov [DOE]

    U.S. Department of Energy (DOE) State Energy Program (SEP), SEP Program Guidance Fiscal Year 2008, Program Year 2008, energy efficiency and renewable energy programs in the states, DOE Office of Energy Efficiency and Renewable Energy

  4. FAQ for Case Study Authors

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Reviews » FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background Materials FAQ for Case Study Authors BER Requirements Review 2015 ASCR Requirements Review 2015 Previous Reviews Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  5. Precision envelope detector and linear rectifier circuitry

    DOEpatents

    Davis, Thomas J.

    1980-01-01

    Disclosed is a method and apparatus for the precise linear rectification and envelope detection of oscillatory signals. The signal is applied to a voltage-to-current converter which supplies current to a constant current sink. The connection between the converter and the sink is also applied through a diode and an output load resistor to a ground connection. The connection is also connected to ground through a second diode of opposite polarity from the diode in series with the load resistor. Very small amplitude voltage signals applied to the converter will cause a small change in the output current of the converter, and the difference between the output current and the constant current sink will be applied either directly to ground through the single diode, or across the output load resistor, dependent upon the polarity. Disclosed also is a full-wave rectifier utilizing constant current sinks and voltage-to-current converters. Additionally, disclosed is a combination of the voltage-to-current converters with differential integrated circuit preamplifiers to boost the initial signal amplitude, and with low pass filtering applied so as to obtain a video or signal envelope output.

  6. Linear air-fuel sensor development

    SciTech Connect

    Garzon, F.; Miller, C.

    1996-12-14

    The electrochemical zirconia solid electrolyte oxygen sensor, is extensively used for monitoring oxygen concentrations in various fields. They are currently utilized in automobiles to monitor the exhaust gas composition and control the air-to-fuel ratio, thus reducing harmful emission components and improving fuel economy. Zirconia oxygen sensors, are divided into two classes of devices: (1) potentiometric or logarithmic air/fuel sensors; and (2) amperometric or linear air/fuel sensors. The potentiometric sensors are ideally suited to monitor the air-to-fuel ratio close to the complete combustion stoichiometry; a value of about 14.8 to 1 parts by volume. This occurs because the oxygen concentration changes by many orders of magnitude as the air/fuel ratio is varied through the stoichiometric value. However, the potentiometric sensor is not very sensitive to changes in oxygen partial pressure away from the stoichiometric point due to the logarithmic dependence of the output voltage signal on the oxygen partial pressure. It is often advantageous to operate gasoline power piston engines with excess combustion air; this improves fuel economy and reduces hydrocarbon emissions. To maintain stable combustion away from stoichiometry, and enable engines to operate in the excess oxygen (lean burn) region several limiting-current amperometric sensors have been reported. These sensors are based on the electrochemical oxygen ion pumping of a zirconia electrolyte. They typically show reproducible limiting current plateaus with an applied voltage caused by the gas diffusion overpotential at the cathode.

  7. Liquid cooled, linear focus solar cell receiver

    DOEpatents

    Kirpich, Aaron S.

    1985-01-01

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  8. Liquid cooled, linear focus solar cell receiver

    DOEpatents

    Kirpich, A.S.

    1983-12-08

    Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

  9. VINETA II: A linear magnetic reconnection experiment

    SciTech Connect

    Bohlin, H. Von Stechow, A.; Rahbarnia, K.; Grulke, O.; Klinger, T.; Ernst-Moritz-Arndt University, Domstr. 11, 17489 Greifswald

    2014-02-15

    A linear experiment dedicated to the study of driven magnetic reconnection is presented. The new device (VINETA II) is suitable for investigating both collisional and near collisionless reconnection. Reconnection is achieved by externally driving magnetic field lines towards an X-point, inducing a current in the background plasma which consequently modifies the magnetic field topology. Owing to the open field line configuration of the experiment, the current is limited by the axial sheath boundary conditions. A plasma gun is used as an additional electron source in order to counterbalance the charge separation effects and supply the required current. Two drive methods are used in the device. First, an oscillating current through two parallel conductors drive the reconnection. Second, a stationary X-point topology is formed by the parallel conductors, and the drive is achieved by an oscillating current through a third conductor. In the first setup, the magnetic field of the axial plasma current dominates the field topology near the X-point throughout most of the drive. The second setup allows for the amplitude of the plasma current as well as the motion of the flux to be set independently of the X-point topology of the parallel conductors.

  10. PROGRAM ABSTRACTS

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    & DEVELOPMENT: PROGRAM ABSTRACTS Energy Efficiency and Renewable Energy Office of Transportation Technologies Office of Advanced Automotive Technologies Catalyst Layer Bipolar Plate Electrode Backing Layers INTEGRATED SYSTEMS Polymer Electrolyte Membrane Fuel Cells Fuel Cell Stack PEM STACK & STACK COMPONENTS Fuel Cell Stack System Air Management System Fuel Processor System For Transportation June 1999 ENERGY EFFICIENCY AND RENEWABLE ENERGY OFFICE OF TRANSPORTATION TECHNOLOGIES OFFICE

  11. Some comparison of restarted GMRES and QMR for linear and nonlinear problems

    SciTech Connect

    Morgan, R.; Joubert, W.

    1994-12-31

    Comparisons are made between the following methods: QMR including its transpose-free version, restarted GMRES, and a modified restarted GMRES that uses approximate eigenvectors to improve convergence, For some problems, the modified GMRES is competitive with or better than QMR in terms of the number of matrix-vector products. Also, the GMRES methods can be much better when several similar systems of linear equations must be solved, as in the case of nonlinear problems and ODE problems.

  12. Quasi-linear heating and acceleration in bi-Maxwellian plasmas

    SciTech Connect

    Hellinger, Petr; Trávníček, Pavel M.

    2013-12-15

    Quasi-linear acceleration and heating rates are derived for drifting bi-Maxwellian distribution functions in a general nonrelativistic case for arbitrary wave vectors, propagation angles, and growth/damping rates. The heating rates in a proton-electron plasma due to ion-cyclotron/kinetic Alfvén and mirror waves for a wide range of wavelengths, directions of propagation, and growth or damping rates are explicitly computed.

  13. Conference on Non-linear Phenomena in Mathematical Physics: Dedicated to Cathleen Synge Morawetz on her 85th Birthday. The Fields Institute, Toronto, Canada September 18-20, 2008. Sponsors: Association for Women in Mathematics, Inc. and The Fields Institute

    SciTech Connect

    Lewis, Jennifer

    2012-10-15

    This scientific meeting focused on the legacy of Cathleen S. Morawetz and the impact that her scientific work on transonic flow and the non-linear wave equation has had in recent progress on different aspects of analysis for non-linear wave, kinetic and quantum transport problems associated to mathematical physics. These are areas where the elements of continuum, statistical and stochastic mechanics, and their interplay, have counterparts in the theory of existence, uniqueness and stability of the associated systems of equations and geometric constraints. It was a central event for the applied and computational analysis community focusing on Partial Differential Equations. The goal of the proposal was to honor Cathleen Morawetz, a highly successful woman in mathematics, while encouraging beginning researchers. The conference was successful in show casing the work of successful women, enhancing the visibility of women in the profession and providing role models for those just beginning their careers. The two-day conference included seven 45-minute lectures and one day of six 45-minute lectures, and a poster session for junior participants. The conference program included 19 distinguished speakers, 10 poster presentations, about 70 junior and senior participants and, of course, the participation of Cathleen Synge Morawetz. The conference celebrated Morawetz's paramount contributions to the theory of non-linear equations in gas dynamics and their impact in the current trends of nonlinear phenomena in mathematical physics, but also served as an awareness session of current women's contribution to mathematics.

  14. Linear Fixed-Field Multi-Pass Arcs for Recirculating Linear Accelerators

    SciTech Connect

    V.S. Morozov, S.A. Bogacz, Y.R. Roblin, K.B. Beard

    2012-06-01

    Recirculating Linear Accelerators (RLA's) provide a compact and efficient way of accelerating particle beams to medium and high energies by reusing the same linac for multiple passes. In the conventional scheme, after each pass, the different energy beams coming out of the linac are separated and directed into appropriate arcs for recirculation, with each pass requiring a separate fixed-energy arc. In this paper we present a concept of an RLA return arc based on linear combined-function magnets, in which two and potentially more consecutive passes with very different energies are transported through the same string of magnets. By adjusting the dipole and quadrupole components of the constituting linear combined-function magnets, the arc is designed to be achromatic and to have zero initial and final reference orbit offsets for all transported beam energies. We demonstrate the concept by developing a design for a droplet-shaped return arc for a dog-bone RLA capable of transporting two beam passes with momenta different by a factor of two. We present the results of tracking simulations of the two passes and lay out the path to end-to-end design and simulation of a complete dog-bone RLA.

  15. Towards reversible basic linear algebra subprograms: A performance study

    DOE PAGES [OSTI]

    Perumalla, Kalyan S.; Yoginath, Srikanth B.

    2014-12-06

    Problems such as fault tolerance and scalable synchronization can be efficiently solved using reversibility of applications. Making applications reversible by relying on computation rather than on memory is ideal for large scale parallel computing, especially for the next generation of supercomputers in which memory is expensive in terms of latency, energy, and price. In this direction, a case study is presented here in reversing a computational core, namely, Basic Linear Algebra Subprograms, which is widely used in scientific applications. A new Reversible BLAS (RBLAS) library interface has been designed, and a prototype has been implemented with two modes: (1) amore » memory-mode in which reversibility is obtained by checkpointing to memory in forward and restoring from memory in reverse, and (2) a computational-mode in which nothing is saved in the forward, but restoration is done entirely via inverse computation in reverse. The article is focused on detailed performance benchmarking to evaluate the runtime dynamics and performance effects, comparing reversible computation with checkpointing on both traditional CPU platforms and recent GPU accelerator platforms. For BLAS Level-1 subprograms, data indicates over an order of magnitude better speed of reversible computation compared to checkpointing. For BLAS Level-2 and Level-3, a more complex tradeoff is observed between reversible computation and checkpointing, depending on computational and memory complexities of the subprograms.« less

  16. Towards reversible basic linear algebra subprograms: A performance study

    SciTech Connect

    Perumalla, Kalyan S.; Yoginath, Srikanth B.

    2014-12-06

    Problems such as fault tolerance and scalable synchronization can be efficiently solved using reversibility of applications. Making applications reversible by relying on computation rather than on memory is ideal for large scale parallel computing, especially for the next generation of supercomputers in which memory is expensive in terms of latency, energy, and price. In this direction, a case study is presented here in reversing a computational core, namely, Basic Linear Algebra Subprograms, which is widely used in scientific applications. A new Reversible BLAS (RBLAS) library interface has been designed, and a prototype has been implemented with two modes: (1) a memory-mode in which reversibility is obtained by checkpointing to memory in forward and restoring from memory in reverse, and (2) a computational-mode in which nothing is saved in the forward, but restoration is done entirely via inverse computation in reverse. The article is focused on detailed performance benchmarking to evaluate the runtime dynamics and performance effects, comparing reversible computation with checkpointing on both traditional CPU platforms and recent GPU accelerator platforms. For BLAS Level-1 subprograms, data indicates over an order of magnitude better speed of reversible computation compared to checkpointing. For BLAS Level-2 and Level-3, a more complex tradeoff is observed between reversible computation and checkpointing, depending on computational and memory complexities of the subprograms.

  17. 2d PDE Linear Asymmetric Matrix Solver

    Energy Science and Technology Software Center

    1983-10-01

    ILUCG2 (Incomplete LU factorized Conjugate Gradient algorithm for 2d problems) was developed to solve a linear asymmetric matrix system arising from a 9-point discretization of two-dimensional elliptic and parabolic partial differential equations found in plasma physics applications, such as plasma diffusion, equilibria, and phase space transport (Fokker-Planck equation) problems. These equations share the common feature of being stiff and requiring implicit solution techniques. When these parabolic or elliptic PDE''s are discretized with finite-difference or finite-elementmore » methods, the resulting matrix system is frequently of block-tridiagonal form. To use ILUCG2, the discretization of the two-dimensional partial differential equation and its boundary conditions must result in a block-tridiagonal supermatrix composed of elementary tridiagonal matrices. A generalization of the incomplete Cholesky conjugate gradient algorithm is used to solve the matrix equation. Loops are arranged to vectorize on the Cray1 with the CFT compiler, wherever possible. Recursive loops, which cannot be vectorized, are written for optimum scalar speed. For problems having a symmetric matrix ICCG2 should be used since it runs up to four times faster and uses approximately 30% less storage. Similar methods in three dimensions are available in ICCG3 and ILUCG3. A general source, containing extensions and macros, which must be processed by a pre-compiler to obtain the standard FORTRAN source, is provided along with the standard FORTRAN source because it is believed to be more readable. The pre-compiler is not included, but pre-compilation may be performed by a text editor as described in the UCRL-88746 Preprint.« less

  18. Federal Financing Programs for Clean Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Federal Financing Programs for Clean Energy Federal Financing Programs for Clean Energy Federal Financing Programs for Clean Energy Federal Financing Programs for Clean Energy is a resource guide to U.S. government programs that support the development of clean energy projects in the U.S. and abroad. Featuring programs from ten agencies, the guide includes summaries and case studies that can benefit private sector partners in finding capital for energy efficiency and clean energy projects. Now

  19. Federal Financing Programs for Clean Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Financing Programs for Clean Energy Federal Financing Programs for Clean Energy Federal Financing Programs for Clean Energy Federal Financing Programs for Clean Energy is a resource guide to U.S. government programs that support the development of clean energy projects in the U.S. and abroad. Featuring programs from ten agencies, the guide includes summaries and case studies that can benefit private sector partners in finding capital for energy efficiency and clean energy projects. Now in its

  20. Case Studies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Case Studies Case Studies The following case studies will be included in the HEP report. Final case studies are due January 7, 2013. Lattice Gauge Theories - Lead: Doug Toussaint Simulations for Cosmic Frontier Experiments - Leads: Peter Nugent & Andrew Connelly Cosmic Microwave Background Data Analysis - Lead: Julian Borrill Cosmological Simulations - Lead: Salman Habib Plasma Accelerator Simulation Using Laser and Particle Beam Drivers - Leads: Cameron Geddes & Frank Tsung Community

  1. Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program Description The Los Alamos STEM Challenge gives your students a unique opportunity to envision the future years of discovery at LANL. Students will develop 21st century skills as they collaborate in teams to research LANL projects and propose innovative future projects. They apply creativity and critical thinking skills as they visualize their own ideas through posters, videos, apps or essays describing potential future projects at LANL. Students are encouraged to learn about the

  2. Programming Libraries

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Libraries Programming Libraries ALTD Automatic Library Tracking Database Infrastructure To track and monitor library usage and better serve your software needs, we have enabled the Automatic Library Tracking Database (ALTD) on our prodcution systems, Hopper and Edison. ALTD is also availailable on Carver. ALTD, originally developed by National Institute for Computational Sciences and further developed at NERSC, automatically and transparently tracks all libraries linked into an application at

  3. Programming models

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NERSC-8 Procurement Programming models File Storage and I/O Edison PDSF Genepool Queues and Scheduling Retired Systems Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov

  4. Program Development

    SciTech Connect

    Atencio, Julian J.

    2014-05-01

    This presentation covers how to go about developing a human reliability program. In particular, it touches on conceptual thinking, raising awareness in an organization, the actions that go into developing a plan. It emphasizes evaluating all positions, eliminating positions from the pool due to mitigating factors, and keeping the process transparent. It lists components of the process and objectives in process development. It also touches on the role of leadership and the necessity for audit.

  5. MFDn Case Study

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MFDn Case Study MFDn Case Study Description of MFDn Many-Fermion Dynamics---nuclear, or MFDn, is a configuration interaction (CI) code for nuclear structure calculations. It is a platform independent Fortran 90 code using a hybrid MPI/ OpenMP programming model,and is being used on current supercomputers, such as Edison at NERSC, for ab initio calculations of atomic nuclei using realistic nucleon-nucleons and three-nucleon forces. A calculation consists of generating a many-body basis space,

  6. Maryland Efficiency Program Options

    Office of Energy Efficiency and Renewable Energy (EERE)

    Maryland Efficiency Program Options, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  7. STEP Program Benchmark Report

    Energy.gov [DOE]

    STEP Program Benchmark Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Commercial Items Test Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached for your information is a copy of Civilian Agency Acquisition Council (CAAC) Letter 2009-04. It advises that the National Defense Authorization Act for Fiscal Year 201 0, Section 8 16 authorizes extension of the Commercial Items Test Program from January 1,20 10 to January 1,20 12 and that an expedited FAR Case is being processed to insert the new date at FAR 13.500(d). Also attached is a class deviation authorizing the use of simplified acquisition procedures for commercial items up to $5.5 million [$I1 million for acquisitions of commercial items under FAR 13.500(e)

  9. Program Evaluation: Program Logic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Logic Program Evaluation: Program Logic Step four will help you develop a logical model for your program (learn more about the other steps in general program evaluations): What is a Logic Model? Benefits of Using Logic Modeling Pitfalls and How to Avoid Them Steps to Developing a Logic Model What is a Logic Model? Logic modeling is a thought process program evaluators have found to be useful for at least forty years and has become increasingly popular with program managers during the

  10. Weatherization Innovation Pilot Program Fact Sheet- Philadelphia Success Story

    Energy.gov [DOE]

    Case Study with WIPP program overview, information regarding eligibility, and successes from Pennsylvanias Commission on Economic Opportunity (CEO) that demonstrate innovative approaches that maximize the benefit of the program.

  11. Non-linear system identification in flow-induced vibration

    SciTech Connect

    Spanos, P.D.; Zeldin, B.A.; Lu, R.

    1996-12-31

    The paper introduces a method of identification of non-linear systems encountered in marine engineering applications. The non-linearity is accounted for by a combination of linear subsystems and known zero-memory non-linear transformations; an equivalent linear multi-input-single-output (MISO) system is developed for the identification problem. The unknown transfer functions of the MISO system are identified by assembling a system of linear equations in the frequency domain. This system is solved by performing the Cholesky decomposition of a related matrix. It is shown that the proposed identification method can be interpreted as a {open_quotes}Gram-Schmidt{close_quotes} type of orthogonal decomposition of the input-output quantities of the equivalent MISO system. A numerical example involving the identification of unknown parameters of flow (ocean wave) induced forces on offshore structures elucidates the applicability of the proposed method.

  12. Electronic Non-Contacting Linear Position Measuring System

    DOEpatents

    Post, Richard F.

    2005-06-14

    A non-contacting linear position location system employs a special transmission line to encode and transmit magnetic signals to a receiver on the object whose position is to be measured. The invention is useful as a non-contact linear locator of moving objects, e.g., to determine the location of a magnetic-levitation train for the operation of the linear-synchronous motor drive system.

  13. Comparative study of microwave radiation-induced magnetoresistive oscillations induced by circularly- and linearly- polarized photo-excitation

    DOE PAGES [OSTI]

    Ye, Tianyu; Liu, Han -Chun; Wang, Zhuo; Wegscheider, W.; Mani, Ramesh G.

    2015-10-09

    A comparative study of the radiation-induced magnetoresistance oscillations in the high mobility GaAs/AlGaAs heterostructure two dimensional electron system (2DES) under linearly- and circularly- polarized microwave excitation indicates a profound difference in the response observed upon rotating the microwave launcher for the two cases, although circularly polarized microwave radiation induced magnetoresistance oscillations observed at low magnetic fields are similar to the oscillations observed with linearly polarized radiation. For the linearly polarized radiation, the magnetoresistive response is a strong sinusoidal function of the launcher rotation (or linear polarization) angle, θ. As a result, for circularly polarized radiation, the oscillatory magnetoresistive response ismore » hardly sensitive to θ.« less

  14. Intergovernmental Programs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs Intergovernmental Programs The Office of Environmental Management supports, by means of grants and cooperative agreements, a number of

  15. Knot Undulator to Generate Linearly Polarized Photons with Low...

    Office of Scientific and Technical Information (OSTI)

    Heat load on beamline optics is a serious problem to generate pure linearly polarized ... Language: English Subject: 43 PARTICLE ACCELERATORS; OPTICS; PERMANENT MAGNETS; PHOTONS; ...

  16. Vibronic coupling simulations for linear and nonlinear optical...

    Office of Scientific and Technical Information (OSTI)

    optical processes: Theory Citation Details In-Document Search Title: Vibronic coupling simulations for linear and nonlinear optical processes: Theory A comprehensive vibronic ...

  17. Entropy-based separation of linear chain molecules by exploiting...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Entropy-based separation of linear chain molecules by exploiting differences in the saturation capacities in cage-type zeolites Previous Next List Rajamani Krishna, Jasper M. van...

  18. Top Quark Anomalous Couplings at the International Linear Collider...

    Office of Scientific and Technical Information (OSTI)

    to a precision of approximately 1% for each of two choices of beam polarization. ... INTERMEDIATE BOSONS; LINEAR COLLIDERS; POLARIZATION; PROBES; QUARKS; SILICON; SIMULATION; ...

  19. A posteriori error analysis of parameterized linear systems using...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: A posteriori error analysis of parameterized linear systems using spectral methods. Citation Details In-Document Search Title: A posteriori error analysis of ...

  20. Simultaneous linear optics and coupling correction for storage...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Simultaneous linear optics and coupling correction for storage rings with turn-by-turn beam position monitor data Citation Details In-Document Search Title:...

  1. Unexpected Angular Dependence of X-Ray Magnetic Linear Dichroism

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Unexpected Angular Dependence of X-Ray Magnetic Linear Dichroism Print Using spectroscopic ... The effect is unique in that it allows us to distinguish which atomic species magnetism ...

  2. Linear electric field time-of-flight ion mass spectrometer

    DOEpatents

    Funsten, Herbert O.; Feldman, William C.

    2008-06-10

    A linear electric field ion mass spectrometer having an evacuated enclosure with means for generating a linear electric field located in the evacuated enclosure and means for injecting a sample material into the linear electric field. A source of pulsed ionizing radiation injects ionizing radiation into the linear electric field to ionize atoms or molecules of the sample material, and timing means determine the time elapsed between ionization of atoms or molecules and arrival of an ion out of the ionized atoms or molecules at a predetermined position.

  3. The Klynac: An Integrated Klystron and Linear Accelerator

    SciTech Connect

    Potter, J. M., Schwellenbach, D., Meidinger, A.

    2012-08-07

    The Klynac concept integrates an electron gun, a radio frequency (RF) power source, and a coupled-cavity linear accelerator into a single resonant system

  4. Knot Undulator to Generate Linearly Polarized Photons with Low...

    Office of Scientific and Technical Information (OSTI)

    pure linearly polarized photons in the third generation synchrotron radiation facilities. ... Sponsoring Org: USDOE Country of Publication: United States Language: English Subject: 43 ...

  5. DOE - Office of Legacy Management -- Stanford Linear Accelerator...

    Office of Legacy Management (LM)

    The Stanford Linear Accelerator Center was established in 1962 as a research facility for high energy particle physics. The Environmental Management mission at this site is to ...

  6. Optimizing minimum free-energy crossing points in solution: Linear...

    Office of Scientific and Technical Information (OSTI)

    Optimizing minimum free-energy crossing points in solution: Linear-response free energyspin-flip density functional theory approach Citation Details In-Document Search Title:...

  7. A Linear Theory of Microwave Instability in Electron Storage...

    Office of Scientific and Technical Information (OSTI)

    Title: A Linear Theory of Microwave Instability in Electron Storage Rings The well-known Haissinski distribution provides a stable equilibrium of longitudinal beam distribution in ...

  8. Self-Sustained Micromechanical Oscillator with Linear Feedback...

    Office of Scientific and Technical Information (OSTI)

    Publisher's Accepted Manuscript: Self-Sustained Micromechanical Oscillator with Linear Feedback This content will become publicly available on July 1, 2017 Prev Next Title: ...

  9. Linearly Polarized Thermal Emitter for More Efficient Thermophotovolta...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Linearly Polarized Thermal Emitter for More Efficient Thermophotovoltaic Devices Ames ... than can be used to create more efficient thermophotovoltaic devices for power generation. ...

  10. Programming Models

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Version Control Tools Programming Libraries Performance and Debugging Tools Grid Software and Services NERSC Software Downloads Software Page Template Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting and questions http://help.nersc.gov

  11. Resource-Efficient Generataion of Linear Cluster States by Linear Optics with postselection

    DOE PAGES [OSTI]

    Uskov, Dmitry B; Alsing, Paul; Fanto, Michael; Kaplan, Lev; Kim, R; Szep, Atilla; Smith IV, Amos M

    2015-01-01

    We report on theoretical research in photonic cluster-state computing. Finding optimal schemes of generating non-classical photonic states is of critical importance for this field as physically implementable photon-photon entangling operations are currently limited to measurement-assisted stochastic transformations. A critical parameter for assessing the efficiency of such transformations is the success probability of a desired measurement outcome. At present there are several experimental groups that are capable of generating multi-photon cluster states carrying more than eight qubits. Separate photonic qubits or small clusters can be fused into a single cluster state by a probabilistic optical CZ gate conditioned on simultaneous detectionmore » of all photons with 1/9 success probability for each gate. This design mechanically follows the original theoretical scheme of cluster state generation proposed more than a decade ago by Raussendorf, Browne, and Briegel. The optimality of the destructive CZ gate in application to linear optical cluster state generation has not been analyzed previously. Our results reveal that this method is far from the optimal one. Employing numerical optimization we have identified that the maximal success probability of fusing n unentangled dual-rail optical qubits into a linear cluster state is equal to 1/2^n-1; an m-tuple of photonic Bell pair states, commonly generated via spontaneous parametric down-conversion, can be fused into a single cluster with the maximal success probability of 1/4^m-1.« less

  12. Resource-efficient generation of linear cluster states by linear optics with postselection

    SciTech Connect

    Uskov, D. B.; Alsing, P. M.; Fanto, M. L.; Kaplan, L.; Kim, R.; Szep, A.; Smith, A. M.

    2015-01-30

    Here we report on theoretical research in photonic cluster-state computing. Finding optimal schemes of generating non-classical photonic states is of critical importance for this field as physically implementable photon-photon entangling operations are currently limited to measurement-assisted stochastic transformations. A critical parameter for assessing the efficiency of such transformations is the success probability of a desired measurement outcome. At present there are several experimental groups that are capable of generating multi-photon cluster states carrying more than eight qubits. Separate photonic qubits or small clusters can be fused into a single cluster state by a probabilistic optical CZ gate conditioned on simultaneous detection of all photons with 1/9 success probability for each gate. This design mechanically follows the original theoretical scheme of cluster state generation proposed more than a decade ago by Raussendorf, Browne, and Briegel. The optimality of the destructive CZ gate in application to linear optical cluster state generation has not been analyzed previously. Our results reveal that this method is far from the optimal one. Employing numerical optimization we have identified that the maximal success probability of fusing n unentangled dual-rail optical qubits into a linear cluster state is equal to 1/2n-1; an m-tuple of photonic Bell pair states, commonly generated via spontaneous parametric down-conversion, can be fused into a single cluster with the maximal success probability of 1/4m-1.

  13. Resource-Efficient Generataion of Linear Cluster States by Linear Optics with postselection

    SciTech Connect

    Uskov, Dmitry B; Alsing, Paul; Fanto, Michael; Kaplan, Lev; Kim, R; Szep, Atilla; Smith IV, Amos M

    2015-01-01

    We report on theoretical research in photonic cluster-state computing. Finding optimal schemes of generating non-classical photonic states is of critical importance for this field as physically implementable photon-photon entangling operations are currently limited to measurement-assisted stochastic transformations. A critical parameter for assessing the efficiency of such transformations is the success probability of a desired measurement outcome. At present there are several experimental groups that are capable of generating multi-photon cluster states carrying more than eight qubits. Separate photonic qubits or small clusters can be fused into a single cluster state by a probabilistic optical CZ gate conditioned on simultaneous detection of all photons with 1/9 success probability for each gate. This design mechanically follows the original theoretical scheme of cluster state generation proposed more than a decade ago by Raussendorf, Browne, and Briegel. The optimality of the destructive CZ gate in application to linear optical cluster state generation has not been analyzed previously. Our results reveal that this method is far from the optimal one. Employing numerical optimization we have identified that the maximal success probability of fusing n unentangled dual-rail optical qubits into a linear cluster state is equal to 1/2^n-1; an m-tuple of photonic Bell pair states, commonly generated via spontaneous parametric down-conversion, can be fused into a single cluster with the maximal success probability of 1/4^m-1.

  14. Resource-efficient generation of linear cluster states by linear optics with postselection

    DOE PAGES [OSTI]

    Uskov, D. B.; Alsing, P. M.; Fanto, M. L.; Kaplan, L.; Kim, R.; Szep, A.; Smith, A. M.

    2015-01-30

    Here we report on theoretical research in photonic cluster-state computing. Finding optimal schemes of generating non-classical photonic states is of critical importance for this field as physically implementable photon-photon entangling operations are currently limited to measurement-assisted stochastic transformations. A critical parameter for assessing the efficiency of such transformations is the success probability of a desired measurement outcome. At present there are several experimental groups that are capable of generating multi-photon cluster states carrying more than eight qubits. Separate photonic qubits or small clusters can be fused into a single cluster state by a probabilistic optical CZ gate conditioned on simultaneousmore » detection of all photons with 1/9 success probability for each gate. This design mechanically follows the original theoretical scheme of cluster state generation proposed more than a decade ago by Raussendorf, Browne, and Briegel. The optimality of the destructive CZ gate in application to linear optical cluster state generation has not been analyzed previously. Our results reveal that this method is far from the optimal one. Employing numerical optimization we have identified that the maximal success probability of fusing n unentangled dual-rail optical qubits into a linear cluster state is equal to 1/2n-1; an m-tuple of photonic Bell pair states, commonly generated via spontaneous parametric down-conversion, can be fused into a single cluster with the maximal success probability of 1/4m-1.« less

  15. Impacts of Energy Efficiency Programs on Customer Satisfaction

    SciTech Connect

    none,

    2011-11-01

    Provides data from nationwide utility customer satisfaction surveys and two case studies to encourage utilities to offer high-quality energy efficiency programs and services for their customers.

  16. Benefits and Costs of Aggressive Energy Efficiency Programs and...

    OpenEI (Open Energy Information) [EERE & EIA]

    and Costs of Aggressive Energy Efficiency Programs and the Impacts of Alternative Sources of Funding: Case Study of Massachusetts Jump to: navigation, search Tool Summary LAUNCH...

  17. New casing for salt problems ''hot item''

    SciTech Connect

    Rountree, R.

    1983-10-01

    Operators in the Williston Basin indicate interest in the high performance casing, which is designed to resist collapse. Lone Star Steel Co. offers custom designed, high performance casing to withstand high pressures and H/sub 2/S encroachment. A number of companies will continue to evaluate the results of the casing programs that employ high performance pipe with considerable interest.

  18. Solar receiver heliostat reflector having a linear drive and position information system

    DOEpatents

    Horton, Richard H.

    1980-01-01

    A heliostat for a solar receiver system comprises an improved drive and control system for the heliostat reflector assembly. The heliostat reflector assembly is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e., heat receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The improved drive system includes linear stepping motors which comprise low weight, low cost, electronic pulse driven components. One embodiment comprises linear stepping motors controlled by a programmed, electronic microprocessor. Another embodiment comprises a tape driven system controlled by a position control magnetic tape.

  19. Solution of dense systems of linear equations in electromagnetic scattering calculations

    SciTech Connect

    Rahola, J.

    1994-12-31

    The discrete-dipole approximation (DDA) is a method for calculating the scattering of light by an irregular particle. The DDA has been used for example in calculations of optical properties of cosmic dust. In this method the particle is approximated by interacting electromagnetic dipoles. Computationally the DDA method includes the solution of large dense systems of linear equations where the coefficient matrix is complex symmetric. In the author`s work, the linear systems of equations are solved by various iterative methods such as the conjugate gradient method applied to the normal equations and QMR. The linear systems have rather low condition numbers due to which many iterative methods perform quite well even without any preconditioning. Some possible preconditioning strategies are discussed. Finally, some fast special methods for computing the matrix-vector product in the iterative methods are considered. In some cases, the matrix-vector product can be computed with the fast Fourier transform, which enables the author to solve dense linear systems of hundreds of thousands of unknowns.

  20. Beryllium Program - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Program About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Beryllium Program Beryllium Program Points of Contact Beryllium Facilities & Areas Beryllium Program Information Hanford CBDPP Committee Beryllium FAQs Beryllium Related Links Hanford Beryllium Awareness Group (BAG) Program Performance Assessments Beryllium Program Feedback Beryllium Health Advocates Primary Contractors/Employers Medical Testing and Surveillance Facilities General Resources Contact Us Beryllium

  1. Geothermal Technologies Program Overview - Peer Review Program

    SciTech Connect

    Milliken, JoAnn

    2011-06-06

    This Geothermal Technologies Program presentation was delivered on June 6, 2011 at a Program Peer Review meeting. It contains annual budget, Recovery Act, funding opportunities, upcoming program activities, and more.

  2. Variable-energy drift-tube linear accelerator

    DOEpatents

    Swenson, Donald A.; Boyd, Jr., Thomas J.; Potter, James M.; Stovall, James E.

    1984-01-01

    A linear accelerator system includes a plurality of post-coupled drift-tubes wherein each post coupler is bistably positionable to either of two positions which result in different field distributions. With binary control over a plurality of post couplers, a significant accumlative effect in the resulting field distribution is achieved yielding a variable-energy drift-tube linear accelerator.

  3. Linear Concentrator System Basics for Concentrating Solar Power

    Office of Energy Efficiency and Renewable Energy (EERE)

    Linear concentrating solar power (CSP) collectors capture the sun's energy with large mirrors that reflect and focus the sunlight onto a linear receiver tube. The receiver contains a fluid that is heated by the sunlight and then used to heat a traditional power cycle that spins a turbine that drives a generator to produce electricity.

  4. Variable-energy drift-tube linear accelerator

    DOEpatents

    Swenson, D.A.; Boyd, T.J. Jr.; Potter, J.M.; Stovall, J.E.

    A linear accelerator system includes a plurality of post-coupled drift-tubes wherein each post coupler is bistably positionable to either of two positions which result in different field distributions. With binary control over a plurality of post couplers, a significant accumlative effect in the resulting field distribution is achieved yielding a variable-energy drift-tube linear accelerator.

  5. Differentially pumped dual linear quadrupole ion trap mass spectrometer

    DOEpatents

    Owen, Benjamin C.; Kenttamaa, Hilkka I.

    2015-10-20

    The present disclosure provides a new tandem mass spectrometer and methods of using the same for analyzing charged particles. The differentially pumped dual linear quadrupole ion trap mass spectrometer of the present disclose includes a combination of two linear quadrupole (LQIT) mass spectrometers with differentially pumped vacuum chambers.

  6. Drift tube suspension for high intensity linear accelerators

    DOEpatents

    Liska, Donald J.; Schamaun, Roger G.; Clark, Donald C.; Potter, R. Christopher; Frank, Joseph A.

    1982-01-01

    The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder.

  7. Drift tube suspension for high intensity linear accelerators

    DOEpatents

    Liska, D.J.; Schamaun, R.G.; Clark, D.C.; Potter, R.C.; Frank, J.A.

    1980-03-11

    The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder.

  8. QPhiX Case Study

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    QPhiX Case Study QPhiX Case Study June 20, 2016 Background QPhiX [1,2,3] is a library optimized for Intel(R) manycore architectures and provides sparse solvers and slash kernels for Lattice QCD calculations. It supports the Wilson dslash operator with and without clover term as well as Conjugate Gradient [4] and BiCGStab [5] solvers. The main task for QPhiX is to solve the sparse linear system dirac equation where the Dslash kernel is defined by wilson dslash Here, U are complex, special

  9. Machinist Pipeline/Apprentice Program Program Description

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    cost effective than previous time-based programs Moves apprentices to journeyworker status more quickly Program Coordinator: Heidi Hahn Email: hahn@lanl.gov Phone number:...

  10. Program Year 2008 State Energy Program Formula

    Energy.gov [DOE] (indexed site)

    420 (covering the State Energy Program) and 10 CFR part ... are the official sources for program requirements. ... of energy efficiency and renewable energy products, ...

  11. Existing Facilities Rebate Program

    Energy.gov [DOE]

    The NYSERDA Existing Facilities program merges the former Peak Load Reduction and Enhanced Commercial and Industrial Performance programs. The new program offers a broad array of different...

  12. Nonlinear vs. linear biasing in Trp-cage folding simulations

    SciTech Connect

    Spiwok, Vojt?ch Oborsk, Pavel; Krlov, Blanka; Pazrikov, Jana

    2015-03-21

    Biased simulations have great potential for the study of slow processes, including protein folding. Atomic motions in molecules are nonlinear, which suggests that simulations with enhanced sampling of collective motions traced by nonlinear dimensionality reduction methods may perform better than linear ones. In this study, we compare an unbiased folding simulation of the Trp-cage miniprotein with metadynamics simulations using both linear (principle component analysis) and nonlinear (Isomap) low dimensional embeddings as collective variables. Folding of the mini-protein was successfully simulated in 200?ns simulation with linear biasing and non-linear motion biasing. The folded state was correctly predicted as the free energy minimum in both simulations. We found that the advantage of linear motion biasing is that it can sample a larger conformational space, whereas the advantage of nonlinear motion biasing lies in slightly better resolution of the resulting free energy surface. In terms of sampling efficiency, both methods are comparable.

  13. Better Buildings Neighborhood Program Business Models Guide: Program Administrator Description

    Energy.gov [DOE]

    Better Buildings Neighborhood Program Business Models Guide: Program Administrator Business Models, Program Administrator Description.

  14. Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Study M2M Smart Grid Investment Grant 1 An irrigation pump connected to a web---to---wireless controller designed by M2M Communications. Agricultural Demand Response Program in California Helps Farmers Reduce Peak Electricity Usage, Operate More Efficiently Year---Round The development of a two---way, web---to---wireless controller for irrigation pumps is the foundation for an agricultural demand response program in California. Designed by M2M Communications of Boise, Idaho, the controller is

  15. Comparison of Home Retrofit Programs in Wisconsin

    SciTech Connect

    Cunningham, K.; Hannigan, E.

    2013-03-01

    To explore ways to reduce customer barriers and increase home retrofit completions, several different existing home retrofit models have been implemented in the state of Wisconsin. This study compared these programs' performance in terms of savings per home and program cost per home to assess the relative cost-effectiveness of each program design. However, given the many variations in these different programs, it is difficult to establish a fair comparison based on only a small number of metrics. Therefore, the overall purpose of the study is to document these programs' performance in a case study approach to look at general patterns of these metrics and other variables within the context of each program. This information can be used by energy efficiency program administrators and implementers to inform home retrofit program design. Six different program designs offered in Wisconsin for single-family energy efficiency improvements were included in the study. For each program, the research team provided information about the programs' approach and goals, characteristics, achievements and performance. The program models were then compared with performance results -- program cost and energy savings -- to help understand the overall strengths and weaknesses or challenges of each model.

  16. Comparison of Home Retrofit Programs in Wisconsin

    SciTech Connect

    Cunningham, Kerrie; Hannigan, Eileen

    2013-03-01

    To explore ways to reduce customer barriers and increase home retrofit completions, several different existing home retrofit models have been implemented in the state of Wisconsin. This study compared these programs' performance in terms of savings per home and program cost per home to assess the relative cost-effectiveness of each program design. However, given the many variations in these different programs, it is difficult to establish a fair comparison based on only a small number of metrics. Therefore, the overall purpose of the study is to document these programs' performance in a case study approach to look at general patterns of these metrics and other variables within the context of each program. This information can be used by energy efficiency program administrators and implementers to inform home retrofit program design. Six different program designs offered in Wisconsin for single-family energy efficiency improvements were included in the study. For each program, the research team provided information about the programs' approach and goals, characteristics, achievements and performance. The program models were then compared with performance results-program cost and energy savings-to help understand the overall strengths and weaknesses or challenges of each model.

  17. Solutia: Massachusetts Chemical Manufacturer Uses SECURE Methodology to Identify Potential Reductions in Utility and Process Energy Consumption. Industrial Technologies Program (ITP) Chemicals BestPractices Plant-Wide Assessment Case Study (Brochure).

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technologies Program BENEFITS * Identified potential annual cost savings of nearly $3.3 million from reduced resource consumption and improved productivity * Found ways to reduce annual electricity consumption by almost 9.6 million kWh and annual fuel consumption by 338,000 MMBtu * Identified ways to decrease fresh water consumption and wastewater generation * Resulted in short-term plans for immediate benefit, such as steam trap and lighting surveys, and long-term plans for optimizing the

  18. Human Reliability Program Overview

    SciTech Connect

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  19. Vehicle Technologies Program Overview

    SciTech Connect

    none,

    2006-09-05

    Overview of the Vehicle Technologies Program including external assessment and market view; internal assessment, program history and progress; program justification and federal role; program vision, mission, approach, strategic goals, outputs, and outcomes; and performance goals.

  20. Part 2 -- current program integrating strategies and lubrication technology

    SciTech Connect

    Johnson, B.

    1996-12-01

    This paper is the second of two that describe the Predictive Maintenance Program for rotating machinery at the Palo Verde Nuclear Generating Station. The Predictive Maintenance program has been enhanced through organizational changes and improved interdisciplinary usage of technology. This paper will discuss current program strategies that have improved the interaction between the Vibration and Lube Oil programs. The {open_quotes}Lube Oil{close_quotes} view of the combined program along with case studies will then be presented.

  1. BetterBuildings for Michigan: Residential Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BetterBuildings for Michigan: Residential Program BetterBuildings for Michigan: Residential Program Fact sheet for BetterBuildings for Michigan's Residential Program, as posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program BetterBuildings for Michigan: Residential Program Fact Sheet (42.09 KB) More Documents & Publications BetterBuildings for Michigan Residential Case Study Spotlight on Michigan: Sweeping the State for Ultimate Success

  2. Whistleblower Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Whistleblower Cases Whistleblower Cases RSS August 12, 2016 WBU-16-0007 - In the Matter of Charles Dalton On August 12, 2016, OHA granted an Appeal of a dismissal of a Complaint filed by Mr. Charles Dalton against BWX Technologies, Inc. (BWXT) under the DOE's Contractor Employee Protection Program, 10 CFR Part 708. In his Complaint, Mr. Dalton alleged that he reported to the Nuclear Regulatory Commission (NRC) and the DOE's Inspector General (IG) various problems with the techniques used by BWXT

  3. Mentoring Program | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mentoring Program Mentoring Program Mentee Questionnaire Mentor Questionnaire Ideas for Mentoring Program Activities...

  4. STEM Education Program Inventory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Issue for STEM Education Program Inventory Title of Program* Requestor Contact Information First Name* Last Name* Phone Number* E-mail* Fax Number Institution Name Program Description* Issue Information Leading Organization* Location of Program / Event Program Address Program Website To select multiple options, press CTRL and click. Type of Program (if Other, enter information in the box to the right.)* Workforce Development Student Programs Public Engagement in Life Long Learning

  5. Residential Buildings Integration Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Program Existing Homes HUD The residential program is grounded on technology and research. ... * Quantitative (reporting) * Qualitative (account management, peer exchange ...

  6. Utility Partnerships Program Overview

    SciTech Connect

    2014-10-03

    Document describes the Utility Partnerships Program within the U.S. Department of Energy's Federal Energy Management Program.

  7. Wisconsin Clean Transportation Program

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  8. HQ Mediation Program Brochure

    Energy.gov [DOE]

    This document is the HQ Mediation Program's brochure.  It generally discusses the services the program offers.

  9. Undergraduate Student Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Careers » Career Options » Students » Undergraduate Program Undergraduate Student Program The Undergraduate Student (UGS) program is a year-round educational program that provides students with relevant research experience while they are pursuing an undergraduate degree. Contact Program Manager Scott Robbins Student Programs (505) 667-3639 Email Program Coordinator Emily Robinson Student Programs (505) 665-0964 Email Deadline for continuing and returning students: you are required to submit

  10. Non-linear stochastic growth rates and redshift space distortions

    DOE PAGES [OSTI]

    Jennings, Elise; Jennings, David

    2015-04-09

    The linear growth rate is commonly defined through a simple deterministic relation between the velocity divergence and the matter overdensity in the linear regime. We introduce a formalism that extends this to a non-linear, stochastic relation between θ = ∇ ∙ v(x,t)/aH and δ. This provides a new phenomenological approach that examines the conditional mean <θ|δ>, together with the fluctuations of θ around this mean. We also measure these stochastic components using N-body simulations and find they are non-negative and increase with decreasing scale from ~10 per cent at k < 0.2 h Mpc-1 to 25 per cent at kmore » ~ 0.45 h Mpc-1 at z = 0. Both the stochastic relation and non-linearity are more pronounced for haloes, M ≤ 5 × 1012 M⊙ h-1, compared to the dark matter at z = 0 and 1. Non-linear growth effects manifest themselves as a rotation of the mean <θ|δ> away from the linear theory prediction -fLTδ, where fLT is the linear growth rate. This rotation increases with wavenumber, k, and we show that it can be well-described by second-order Lagrangian perturbation theory (2LPT) fork < 0.1 h Mpc-1. Furthermore, the stochasticity in the θ – δ relation is not so simply described by 2LPT, and we discuss its impact on measurements of fLT from two-point statistics in redshift space. Furthermore, given that the relationship between δ and θ is stochastic and non-linear, this will have implications for the interpretation and precision of fLT extracted using models which assume a linear, deterministic expression.« less

  11. Robust parallel iterative solvers for linear and least-squares problems, Final Technical Report

    SciTech Connect

    Saad, Yousef

    2014-01-16

    The primary goal of this project is to study and develop robust iterative methods for solving linear systems of equations and least squares systems. The focus of the Minnesota team is on algorithms development, robustness issues, and on tests and validation of the methods on realistic problems. 1. The project begun with an investigation on how to practically update a preconditioner obtained from an ILU-type factorization, when the coefficient matrix changes. 2. We investigated strategies to improve robustness in parallel preconditioners in a specific case of a PDE with discontinuous coefficients. 3. We explored ways to adapt standard preconditioners for solving linear systems arising from the Helmholtz equation. These are often difficult linear systems to solve by iterative methods. 4. We have also worked on purely theoretical issues related to the analysis of Krylov subspace methods for linear systems. 5. We developed an effective strategy for performing ILU factorizations for the case when the matrix is highly indefinite. The strategy uses shifting in some optimal way. The method was extended to the solution of Helmholtz equations by using complex shifts, yielding very good results in many cases. 6. We addressed the difficult problem of preconditioning sparse systems of equations on GPUs. 7. A by-product of the above work is a software package consisting of an iterative solver library for GPUs based on CUDA. This was made publicly available. It was the first such library that offers complete iterative solvers for GPUs. 8. We considered another form of ILU which blends coarsening techniques from Multigrid with algebraic multilevel methods. 9. We have released a new version on our parallel solver - called pARMS [new version is version 3]. As part of this we have tested the code in complex settings - including the solution of Maxwell and Helmholtz equations and for a problem of crystal growth.10. As an application of polynomial preconditioning we considered the

  12. A deterministic solution of the first order linear Boltzmann transport equation in the presence of external magnetic fields

    SciTech Connect

    St Aubin, J. Keyvanloo, A.; Fallone, B. G.; Vassiliev, O.

    2015-02-15

    Purpose: Accurate radiotherapy dose calculation algorithms are essential to any successful radiotherapy program, considering the high level of dose conformity and modulation in many of todays treatment plans. As technology continues to progress, such as is the case with novel MRI-guided radiotherapy systems, the necessity for dose calculation algorithms to accurately predict delivered dose in increasingly challenging scenarios is vital. To this end, a novel deterministic solution has been developed to the first order linear Boltzmann transport equation which accurately calculates x-ray based radiotherapy doses in the presence of magnetic fields. Methods: The deterministic formalism discussed here with the inclusion of magnetic fields is outlined mathematically using a discrete ordinates angular discretization in an attempt to leverage existing deterministic codes. It is compared against the EGSnrc Monte Carlo code, utilizing the emf-macros addition which calculates the effects of electromagnetic fields. This comparison is performed in an inhomogeneous phantom that was designed to present a challenging calculation for deterministic calculations in 0, 0.6, and 3 T magnetic fields oriented parallel and perpendicular to the radiation beam. The accuracy of the formalism discussed here against Monte Carlo was evaluated with a gamma comparison using a standard 2%/2 mm and a more stringent 1%/1 mm criterion for a standard reference 10 10 cm{sup 2} field as well as a smaller 2 2 cm{sup 2} field. Results: Greater than 99.8% (94.8%) of all points analyzed passed a 2%/2 mm (1%/1 mm) gamma criterion for all magnetic field strengths and orientations investigated. All dosimetric changes resulting from the inclusion of magnetic fields were accurately calculated using the deterministic formalism. However, despite the algorithms high degree of accuracy, it is noticed that this formalism was not unconditionally stable using a discrete ordinate angular discretization

  13. Structure/Function Studies of Proteins Using Linear Scaling Quantum Mechanical Methodologies

    SciTech Connect

    Merz, K. M.

    2004-07-19

    We developed a linear-scaling semiempirical quantum mechanical (QM) program (DivCon). Using DivCon we can now routinely carry out calculations at the fully QM level on systems containing up to about 15 thousand atoms. We also implemented a Poisson-Boltzmann (PM) method into DivCon in order to compute solvation free energies and electrostatic properties of macromolecules in solution. This new suite of programs has allowed us to bring the power of quantum mechanics to bear on important biological problems associated with protein folding, drug design and enzyme catalysis. Hence, we have garnered insights into biological systems that have been heretofore impossible to obtain using classical simulation techniques.

  14. Explicit 2-D Hydrodynamic FEM Program

    Energy Science and Technology Software Center

    1996-08-07

    DYNA2D* is a vectorized, explicit, two-dimensional, axisymmetric and plane strain finite element program for analyzing the large deformation dynamic and hydrodynamic response of inelastic solids. DYNA2D* contains 13 material models and 9 equations of state (EOS) to cover a wide range of material behavior. The material models implemented in all machine versions are: elastic, orthotropic elastic, kinematic/isotropic elastic plasticity, thermoelastoplastic, soil and crushable foam, linear viscoelastic, rubber, high explosive burn, isotropic elastic-plastic, temperature-dependent elastic-plastic. Themore » isotropic and temperature-dependent elastic-plastic models determine only the deviatoric stresses. Pressure is determined by one of 9 equations of state including linear polynomial, JWL high explosive, Sack Tuesday high explosive, Gruneisen, ratio of polynomials, linear polynomial with energy deposition, ignition and growth of reaction in HE, tabulated compaction, and tabulated.« less

  15. Explicit 2-D Hydrodynamic FEM Program

    SciTech Connect

    1996-08-07

    DYNA2D* is a vectorized, explicit, two-dimensional, axisymmetric and plane strain finite element program for analyzing the large deformation dynamic and hydrodynamic response of inelastic solids. DYNA2D* contains 13 material models and 9 equations of state (EOS) to cover a wide range of material behavior. The material models implemented in all machine versions are: elastic, orthotropic elastic, kinematic/isotropic elastic plasticity, thermoelastoplastic, soil and crushable foam, linear viscoelastic, rubber, high explosive burn, isotropic elastic-plastic, temperature-dependent elastic-plastic. The isotropic and temperature-dependent elastic-plastic models determine only the deviatoric stresses. Pressure is determined by one of 9 equations of state including linear polynomial, JWL high explosive, Sack Tuesday high explosive, Gruneisen, ratio of polynomials, linear polynomial with energy deposition, ignition and growth of reaction in HE, tabulated compaction, and tabulated.

  16. Effective Yukawa couplings and flavor-changing Higgs boson decays at linear colliders

    SciTech Connect

    Gabrielli, E.; Mele, B.

    2011-04-01

    We analyze the advantages of a linear-collider program for testing a recent theoretical proposal where the Higgs boson Yukawa couplings are radiatively generated, keeping unchanged the standard-model mechanism for electroweak-gauge-symmetry breaking. Fermion masses arise at a large energy scale through an unknown mechanism, and the standard model at the electroweak scale is regarded as an effective field theory. In this scenario, Higgs boson decays into photons and electroweak gauge-boson pairs are considerably enhanced for a light Higgs boson, which makes a signal observation at the LHC straightforward. On the other hand, the clean environment of a linear collider is required to directly probe the radiative fermionic sector of the Higgs boson couplings. Also, we show that the flavor-changing Higgs boson decays are dramatically enhanced with respect to the standard model. In particular, we find a measurable branching ratio in the range (10{sup -4}-10{sup -3}) for the decay H{yields}bs for a Higgs boson lighter than 140 GeV, depending on the high-energy scale where Yukawa couplings vanish. We present a detailed analysis of the Higgs boson production cross sections at linear colliders for interesting decay signatures, as well as branching-ratio correlations for different flavor-conserving/nonconserving fermionic decays.

  17. Linear beam-beam tune shift calculations for the Tevatron Collider

    SciTech Connect

    Johnson, D.

    1989-01-12

    A realistic estimate of the linear beam-beam tune shift is necessary for the selection of an optimum working point in the tune diagram. Estimates of the beam-beam tune shift using the ''Round Beam Approximation'' (RBA) have over estimated the tune shift for the Tevatron. For a hadron machine with unequal lattice functions and beam sizes, an explicit calculation using the beam size at the crossings is required. Calculations for various Tevatron lattices used in Collider operation are presented. Comparisons between the RBA and the explicit calculation, for elliptical beams, are presented. This paper discusses the calculation of the linear tune shift using the program SYNCH. Selection of a working point is discussed. The magnitude of the tune shift is influenced by the choice of crossing points in the lattice as determined by the pbar ''cogging effects''. Also discussed is current cogging procedures and presents results of calculations for tune shifts at various crossing points in the lattice. Finally, a comparison of early pbar tune measurements with the present linear tune shift calculations is presented. 17 refs., 13 figs., 3 tabs.

  18. Method and apparatus of highly linear optical modulation

    DOEpatents

    DeRose, Christopher; Watts, Michael R.

    2016-05-03

    In a new optical intensity modulator, a nonlinear change in refractive index is used to balance the nonlinearities in the optical transfer function in a way that leads to highly linear optical intensity modulation.

  19. Linear Scaling of the Exciton Binding Energy versus the Band...

    Office of Scientific and Technical Information (OSTI)

    Linear Scaling of the Exciton Binding Energy versus the Band Gap of Two-Dimensional Materials This content will become publicly available on August 6, 2016 Prev Next Title:...

  20. Spin relaxation and linear-in-electric-field frequency shift...

    Office of Scientific and Technical Information (OSTI)

    arbitrary, time-independent magnetic field Citation Details In-Document Search Title: Spin relaxation and linear-in-electric-field frequency shift in an arbitrary, time-independen...

  1. Fourth order resonance of a high intensity linear accelerator...

    Office of Scientific and Technical Information (OSTI)

    For a high intensity beam, the 4nu1 resonance of a linear accelerator is manifested through the octupolar term of space charge potential when the depressed phase advance sigma ...

  2. Linear and cubic response to the initial eccentricity in heavy...

    Office of Scientific and Technical Information (OSTI)

    Linear and cubic response to the initial eccentricity in heavy-ion collisions Citation Details In-Document Search This content will become publicly available on January 21, 2017 ...

  3. Linear Scaling Electronic Structure Methods with Periodic Boundary Conditions

    SciTech Connect

    Gustavo E. Scuseria

    2008-02-08

    The methodological development and computational implementation of linear scaling quantum chemistry methods for the accurate calculation of electronic structure and properties of periodic systems (solids, surfaces, and polymers) and their application to chemical problems of DOE relevance.

  4. An object oriented design for high performance linear algebra on distributed memory architectures

    SciTech Connect

    Dongarra, J.J. |; Walker, D.W.; Pozo, R.

    1993-12-31

    We describe the design of ScaLAPACK++, an object oriented C++ library for implementing linear algebra computations on distributed memory multicomputers. This package, when complete, will support distributed dense, banded, sparse matrix operations for symmetric, positive-definite, and non-symmetric cases. In ScaLAPACK++ we have employed object oriented design methods to enchance scalability, portability, flexibility, and ease-of-use. We illustrate some of these points by describing the implementation of a right-looking LU factorization for dense systems in ScaLAPACK++.

  5. Electron acceleration by linearly polarized twisted laser pulse with narrow divergence

    SciTech Connect

    Vaziri, Mohammad Sohaily, Sozha; Golshani, Mojtaba; Bahrampour, Alireza

    2015-03-15

    We numerically investigate the vacuum electron acceleration by a high-intensity linearly polarized twisted laser pulse. It is shown that the inherent spiral structure of a Laguerre-Gaussian laser pulse leads to improvement in trapping and acceleration of an electron to energies of the order of GeV in the off-axis case. Also, it is demonstrated that by employing a proper choice of initial injection parameters, the high-energetic electrons with very small scattering angles can be produced.

  6. Calculation of voltage harmonic distortion caused by small non-linear loads

    SciTech Connect

    Hegazy, Y.G.; Salama, M.M.A.

    1995-10-01

    This paper presents an accurate method to evaluate the harmonic distortion in distribution systems. This method overcomes most of the drawbacks of the traditional methods. The main idea of the proposed method is to represent the harmonic effects of small non-linear loads by an equivalent large load. A case study is presented in the paper to illustrate the proposed method. The total harmonic distortion factor is evaluated at different busses of a distribution system using the proposed method. The results are then compared to those obtained using the traditional methods.

  7. Linear study of Rayleigh-Taylor instability in a diffusive quantum plasma

    SciTech Connect

    Momeni, Mahdi

    2013-08-15

    The linear Rayleigh-Taylor (RT) instability in an incompressible quantum plasma is investigated on the basis of quantum magnetohydrodynamic model. It is shown that the occurrence of RT instability depends on density-temperature inhomogeneity (characteristic lengths) on one hand, and the system layer size on the other. It is also observed that the combined effects of external magnetic field, diffusivity, and quantum pressure significantly modify the dispersion properties of system in both the parallel and perpendicular directions. For any case, the imaginary and real parts of dispersion relation are presented and the possibility and conditions for the instability growth rate are discussed.

  8. BetterBuildings for Michigan Residential Case Study

    Energy.gov [DOE]

    Residential case study from BetterBuilding for Michigan, as posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program.

  9. Free piston variable-stroke linear-alternator generator

    DOEpatents

    Haaland, Carsten M.

    1998-01-01

    A free-piston variable stroke linear-alternator AC power generator for a combustion engine. An alternator mechanism and oscillator system generates AC current. The oscillation system includes two oscillation devices each having a combustion cylinder and a flying turnbuckle. The flying turnbuckle moves in accordance with the oscillation device. The alternator system is a linear alternator coupled between the two oscillation devices by a slotted connecting rod.

  10. Free piston variable-stroke linear-alternator generator

    DOEpatents

    Haaland, C.M.

    1998-12-15

    A free-piston variable stroke linear-alternator AC power generator for a combustion engine is described. An alternator mechanism and oscillator system generates AC current. The oscillation system includes two oscillation devices each having a combustion cylinder and a flying turnbuckle. The flying turnbuckle moves in accordance with the oscillation device. The alternator system is a linear alternator coupled between the two oscillation devices by a slotted connecting rod. 8 figs.

  11. Producing Linear Alpha Olefins From Biomass - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Producing Linear Alpha Olefins From Biomass Great Lakes Bioenergy Research Center Contact GLBRC About This Technology Technology Marketing Summary Linear alpha olefins (LAOs) are valuable commodity chemicals traditionally derived from petroleum. They are versatile building blocks for making a range of chemical products like polyethylene, synthetic oils, plasticizers, detergents and oilfield fluids. Relying on fossil fuel to manufacture LAOs is problematic. Not only are the standard methods

  12. International Linear Collider Technical Design Report - Volume 2: Physics

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect International Linear Collider Technical Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume 2: Physics Authors: Baer, Howard ; Barklow, Tim ; Fujii, Keisuke ; Gao, Yuanning ; Hoang, Andre ; Kanemura, Shinya ; List, Jenny ; Logan, Heather E. ; Nomerotski, Andrei ; Perelstein, Maxim ; Peskin, Michael E. ; Poschl, Roman ; Reuter, Jurgen ; Riemann, Sabine ; Savoy-Navarro,

  13. JLab Supports International Linear Collider Cavity Development Work |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jefferson Lab Supports International Linear Collider Cavity Development Work JLab Supports International Linear Collider Cavity Development Work NEWPORT NEWS, Va. Feb. 12, 2008 - It's not often that major-league baseball and nuclear physics get to share the limelight, but that's what's happening at the Department of Energy's Jefferson Lab. The baseball connection involves a nine-cell niobium cavity developed by KEK accelerator scientists in Japan as one of several designs being tested for

  14. Accessing the Distribution of Linearly Polarized Gluons in Unpolarized Hadrons

    SciTech Connect

    Boer, Daniel; Brodsky, Stanley J.; Mulders, Piet J.; Pisano, Cristian; /Cagliari U. /INFN, Cagliari

    2011-08-19

    Gluons inside unpolarized hadrons can be linearly polarized provided they have a nonzero transverse momentum. The simplest and theoretically safest way to probe this distribution of linearly polarized gluons is through cos2{phi} asymmetries in heavy quark pair or dijet production in electron-hadron collisions. Future Electron-Ion Collider (EIC) or Large Hadron electron Collider (LHeC) experiments are ideally suited for this purpose. Here we estimate the maximum asymmetries for EIC kinematics.

  15. Trends in Utility Green Pricing Programs (2005)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report presents year-end 2005 data on utility green pricing programs, and examines trends in consumer response and program implementation over time. The data in this report, which were obtained via a questionnaire distributed to utility green pricing program managers, can be used by utilities to benchmark the success of their green power programs. It is important to note that this report covers only a portion of voluntary markets for renewable energy. It does not cover green power sold by independent marketers except for cases in which the marketers work in conjunction with utilities or default electricity suppliers.

  16. Proceedings of the Oak Ridge Electron Linear Accelerator (ORELA) Workshop

    SciTech Connect

    Dunn, M.E.

    2006-02-27

    The Oak Ridge National Laboratory (ORNL) organized a workshop at ORNL July 14-15, 2005, to highlight the unique measurement capabilities of the Oak Ridge Electron Linear Accelerator (ORELA) facility and to emphasize the important role of ORELA for performing differential cross-section measurements in the low-energy resonance region that is important for nuclear applications such as nuclear criticality safety, nuclear reactor and fuel cycle analysis, stockpile stewardship, weapons research, medical diagnosis, and nuclear astrophysics. The ORELA workshop (hereafter referred to as the Workshop) provided the opportunity to exchange ideas and information pertaining to nuclear cross-section measurements and their importance for nuclear applications from a variety of perspectives throughout the U.S. Department of Energy (DOE). Approximately 50 people, representing DOE, universities, and seven U.S. national laboratories, attended the Workshop. The objective of the Workshop was to emphasize the technical community endorsement for ORELA in meeting nuclear data challenges in the years to come. The Workshop further emphasized the need for a better understanding of the gaps in basic differential nuclear measurements and identified the efforts needed to return ORELA to a reliable functional measurement facility. To accomplish the Workshop objective, nuclear data experts from national laboratories and universities were invited to provide talks emphasizing the unique and vital role of the ORELA facility for addressing nuclear data needs. ORELA is operated on a full cost-recovery basis with no single sponsor providing complete base funding for the facility. Consequently, different programmatic sponsors benefit by receiving accurate cross-section data measurements at a reduced cost to their respective programs; however, leveraging support for a complex facility such as ORELA has a distinct disadvantage in that the programmatic funds are only used to support program

  17. Home audit program: management manual

    SciTech Connect

    Not Available

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  18. SmartBuildings Detroit Commercial Case Study

    Energy.gov [DOE]

    SmartBuildings Detroit Commercial Case Study, a document from BetterBuildings for Michigan posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program.

  19. Low-level RF signal processing for the Next Linear Collider Test Accelerator

    SciTech Connect

    Holmes, S.; Ziomek, C.; Adolphsen, C.

    1997-05-12

    In the X-band accelerator system for the Next Linear Collider Test Accelerator (NLCTA), the Low Level RF (LLRF) drive system must be very phase stable, but concurrently, be very phase agile. Phase agility is needed to make the Stanford Linear Doubler (SLED) power multiplier systems Energy work and to shape the RF waveforms to compensate beam loading in the accelerator sections. Similarly, precision fast phase and amplitude monitors are required to view, track, and feed back on RF signals at various locations throughout the system. The LLRF is composed of several subsystems: the RF Reference System generates and distributes a reference 11.424 GHz signal to all of the RF stations, the Signal Processing Chassis creates the RF waveforms with the appropriate phase modulation, and the Phase Detector Assembly measures the amplitude and phase of monitor3ed RF signals. The LLRF is run via VXI instrumentation. These instruments are controlled using HP VEE graphical programming software. Programs have been developed to shape the RF waveform, calibrate the phase modulators and demodulators, and display the measured waveforms. This paper describes these and other components of the LLRF system.

  20. High School Internship Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    High School Internship Program High School Internship Program Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Program Manager Scott Robbins Student Programs (505) 667-3639 Email Program Coordinator Emily Robinson Student Programs (505) 665-0964 Email Opportunities for Northern New Mexico high school seniors The High School Internship Program provides qualified

  1. CALiPER Report 21.3: Cost-Effectiveness of Linear (T8) LED Lamps

    SciTech Connect

    Miller, Naomi J.; Perrin, Tess E.; Royer, Michael P.

    2014-05-27

    Meeting performance expectations is important for driving adoption of linear LED lamps, but cost-effectiveness may be an overriding factor in many cases. Linear LED lamps cost more initially than fluorescent lamps, but energy and maintenance savings may mean that the life-cycle cost is lower. This report details a series of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38 W total power draw) or fluorescent lamps (51 W total power draw) over a 10-year study period. Variables included LED system cost ($40, $80, or $120), annual operating hours (2,000 hours or 4,000 hours), LED installation time (15 minutes or 30 minutes), and melded electricity rate ($0.06/kWh, $0.12/kWh, $0.18/kWh, or $0.24/kWh). A full factorial of simulations allows users to interpolate between these values to aid in making rough estimates of economic feasibility for their own projects. In general, while their initial cost premium remains high, linear LED lamps are more likely to be cost-effective when electric utility rates are higher than average and hours of operation are long, and if their installation time is shorter.

  2. CALiPER Report 21.3. Cost Effectiveness of Linear (T8) LED Lamps

    SciTech Connect

    2014-05-01

    Meeting performance expectations is important for driving adoption of linear LED lamps, but cost-effectiveness may be an overriding factor in many cases. Linear LED lamps cost more initially than fluorescent lamps, but energy and maintenance savings may mean that the life-cycle cost is lower. This report details a series of life-cycle cost simulations that compared a two-lamp troffer using LED lamps (38 W total power draw) or fluorescent lamps (51 W total power draw) over a 10-year study period. Variables included LED system cost ($40, $80, or $120), annual operating hours (2,000 hours or 4,000 hours), LED installation time (15 minutes or 30 minutes), and melded electricity rate ($0.06/kWh, $0.12/kWh, $0.18/kWh, or $0.24/kWh). A full factorial of simulations allows users to interpolate between these values to aid in making rough estimates of economic feasibility for their own projects. In general, while their initial cost premium remains high, linear LED lamps are more likely to be cost-effective when electric utility rates are higher than average and hours of operation are long, and if their installation time is shorter.

  3. Whistler waves produced by a modulated spiraling electron beam: Linear approach

    SciTech Connect

    Krafft, C.; Volokitin, A.; Matthieussent, G.

    1996-03-01

    The theory of whistler wave interaction with a modulated electron beam injected obliquely to the magnetic field in an unbounded space plasma is considered. The study of the energy transfer between the spiraling beam and the whistler wave is done in the case of sheared whistlers, when the parallel wave number is very small compared to the perpendicular one. In the linear regime, structures of potentials and electromagnetic fields in the beam vicinity and in the wave zone are obtained analytically: Simple expressions for field components are provided for {hacek C}erenkov and Doppler resonances, in double and single pole cases. Emitted power is calculated as a function of beam parameters. {copyright} {ital 1996 American Institute of Physics.}

  4. State Energy Program Competitive Financial Assistance Program

    Energy.gov [DOE]

    State Energy Program (SEP) dedicates a portion of its funding each year to provide competitively awarded financial assistance to U.S. states and territories to advance policies, programs, and market strategies.

  5. Algorithmic advances in stochastic programming

    SciTech Connect

    Morton, D.P.

    1993-07-01

    Practical planning problems with deterministic forecasts of inherently uncertain parameters often yield unsatisfactory solutions. Stochastic programming formulations allow uncertain parameters to be modeled as random variables with known distributions, but the size of the resulting mathematical programs can be formidable. Decomposition-based algorithms take advantage of special structure and provide an attractive approach to such problems. We consider two classes of decomposition-based stochastic programming algorithms. The first type of algorithm addresses problems with a ``manageable`` number of scenarios. The second class incorporates Monte Carlo sampling within a decomposition algorithm. We develop and empirically study an enhanced Benders decomposition algorithm for solving multistage stochastic linear programs within a prespecified tolerance. The enhancements include warm start basis selection, preliminary cut generation, the multicut procedure, and decision tree traversing strategies. Computational results are presented for a collection of ``real-world`` multistage stochastic hydroelectric scheduling problems. Recently, there has been an increased focus on decomposition-based algorithms that use sampling within the optimization framework. These approaches hold much promise for solving stochastic programs with many scenarios. A critical component of such algorithms is a stopping criterion to ensure the quality of the solution. With this as motivation, we develop a stopping rule theory for algorithms in which bounds on the optimal objective function value are estimated by sampling. Rules are provided for selecting sample sizes and terminating the algorithm under which asymptotic validity of confidence interval statements for the quality of the proposed solution can be verified. Issues associated with the application of this theory to two sampling-based algorithms are considered, and preliminary empirical coverage results are presented.

  6. Potential co-disposal of greater-than-class C low-level radioactive waste with Department of Energy special case waste - greater-than-class C low-level waste management program

    SciTech Connect

    Allred, W.E.

    1994-09-01

    This document evaluates the feasibility of co-disposing of greater-than-Class C low-level radioactive waste (GTCC LLW) with U.S. Department of Energy (DOE) special case waste (SCW). This document: (1) Discusses and evaluates key issues concerning co-disposal of GTCC LLW with SCW. This includes examining these issues in terms of regulatory concerns, technical feasibility, and economics; (2) Examines advantages and disadvantages of such co-disposal; and (3) Makes recommendations. Research and analysis of the issues presented in this report indicate that it would be technically and economically feasible to co-dispose of GTCC LLW with DOE SCW. However, a dilemma will likely arise in the current division of regulatory responsibilities between the U.S. Nuclear Regulatory Commission and DOE (i.e., current requirement for disposal of GTCC LLW in a facility licensed by the Nuclear Regulatory Commission). DOE SCW is currently not subject to this licensing requirement.

  7. Federal Financing Programs for Clean Energy

    Energy.gov [DOE]

    Federal Financing Programs for Clean Energy is a resource guide to U.S. government programs that support the development of clean energy projects in the U.S. and abroad. Featuring programs from ten agencies, the guide includes summaries and case studies that can benefit private sector partners in finding capital for energy efficiency and clean energy projects. Now in its third edition, the guide includes financing programs for both domestic and international projects. For every program listed, the guide identifies additional contact information to answer questions and provide additional direction. The guide includes programs from the U.S. Departments of Agriculture, Energy, Housing and Urban Development, State, Transportation and Treasury, along with the Environmental Protection Agency, Overseas Private Investment Corporation, and the Small Business Administration.

  8. Block quasi-minimal residual iterations for non-Hermitian linear systems

    SciTech Connect

    Freund, R.W.

    1994-12-31

    Many applications require the solution of multiple linear systems that have the same coefficient matrix, but differ only in their right-hand sides. Instead of applying an iterative method to each of these systems individually, it is usually more efficient to employ a block version of the method that generates blocks of iterates for all the systems simultaneously. An example of such an iteration is the block conjugate gradient algorithm, which was first studied by Underwood and O`Leary. On parallel architectures, block versions of conjugate gradient-type methods are attractive even for the solution of single linear systems, since they have fewer synchronization points than the standard versions of these algorithms. In this talk, the author presents a block version of Freund and Nachtigal`s quasi-minimal residual (QMR) method for the iterative solution of non-Hermitian linear systems. He describes two different implementations of the block-QMR method, one based on a block version of the three-term Lanczos algorithm and one based on coupled two-term block recurrences. In both cases, the underlying block-Lanczos process still allows arbitrary normalizations of the vectors within each block, and the author discusses different normalization strategies. To maintain linear independence within each block, it is usually necessary to reduce the block size in the course of the iteration, and the author describes a deflation technique for performing this reduction. He also present some convergence results, and reports results of numerical experiments with the block-QMR method. Finally, the author discusses possible block versions of transpose-free Lanczos-based iterations such as the TFQMR method.

  9. Towards time-dependent current-density-functional theory in the non-linear regime

    SciTech Connect

    Escartn, J. M.; Vincendon, M.; Dinh, P. M.; Suraud, E.; Romaniello, P.; Reinhard, P.-G.

    2015-02-28

    Time-Dependent Density-Functional Theory (TDDFT) is a well-established theoretical approach to describe and understand irradiation processes in clusters and molecules. However, within the so-called adiabatic local density approximation (ALDA) to the exchange-correlation (xc) potential, TDDFT can show insufficiencies, particularly in violently dynamical processes. This is because within ALDA the xc potential is instantaneous and is a local functional of the density, which means that this approximation neglects memory effects and long-range effects. A way to go beyond ALDA is to use Time-Dependent Current-Density-Functional Theory (TDCDFT), in which the basic quantity is the current density rather than the density as in TDDFT. This has been shown to offer an adequate account of dissipation in the linear domain when the Vignale-Kohn (VK) functional is used. Here, we go beyond the linear regime and we explore this formulation in the time domain. In this case, the equations become very involved making the computation out of reach; we hence propose an approximation to the VK functional which allows us to calculate the dynamics in real time and at the same time to keep most of the physics described by the VK functional. We apply this formulation to the calculation of the time-dependent dipole moment of Ca, Mg and Na{sub 2}. Our results show trends similar to what was previously observed in model systems or within linear response. In the non-linear domain, our results show that relaxation times do not decrease with increasing deposited excitation energy, which sets some limitations to the practical use of TDCDFT in such a domain of excitations.

  10. Higher-degree linear approximations of nonlinear systems

    SciTech Connect

    Karahan, S.

    1989-01-01

    In this dissertation, the author develops a new method for obtaining higher degree linear approximations of nonlinear control systems. The standard approach in the analysis and synthesis of nonlinear systems is a first order approximation by a linear model. This is usually performed by obtaining a series expansion of the system at some nominal operating point and retaining only the first degree terms in the series. The accuracy of this approximation depends on how far the system moves away from the normal point, and on the relative magnitudes of the higher degree terms in the series expansion. The approximation is achieved by finding an appropriate nonlinear coordinate transformation-feedback pair to perform the higher degree linearization. With the proposed method, one can improve the accuracy of the approximation up to arbitrarily higher degrees, provided certain solvability conditions are satisfied. The Hunt-Su linearizability theorem makes these conditions precise. This approach is similar to Poincare's Normal Form Theorem in formulation, but different in its solution method. After some mathematical background the author derives a set of equations (called the Homological Equations). A solution to this system of linear equations is equivalent to the solution to the problem of approximate linearization. However, it is generally not possible to solve the system of equations exactly. He outlines a method for systematically finding approximate solutions to these equations using singular value decomposition, while minimizing an error with respect to some defined norm.

  11. Quantum chaos of an ion trapped in a linear ion trap

    SciTech Connect

    Berman, Gennady P. [Theoretical Division T-13, and CNLS, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Theoretical Division T-13, and CNLS, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); James, Daniel F. V. [Theoretical Division T-4, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Theoretical Division T-4, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Kamenev, Dimitri I. [Theoretical Division T-13, and CNLS, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States) [Theoretical Division T-13, and CNLS, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Nizhny Novgorod State University, Nizhny Novgorod, 603600, Russia (Russian Federation)

    2000-06-01

    We describe the transition to quantum chaos of an ion trapped in a linear ion trap and interacting with two laser fields. Under the conditions of adiabatic illumination of the upper level of the ion, and when the frequencies of the two laser beams are slightly different, the system is reduced to a quantum linear oscillator interacting with a monochromatic wave. The property of localization over the quantum resonance cells is proposed to exploit in order to facilitate the process of measurement of the probability distribution of an ion on the vibrational levels. In the regime of strong chaos the time-averaged values of the energy and dispersion of energy are computed and compared with the corresponding classical quantities for different values of the perturbation amplitude. In the exact resonance case, the classical analog of the system possesses an infinite inhomogeneous stochastic web. We analyze the quantum dynamics inside the inhomogeneous web. It is shown that the quantum system mimics on average the dynamics of the corresponding classical system. Formation of the quantum resonance cells is illustrated in the case of a finite detuning from the exact resonance, and under increasing of the wave amplitude. The parameters of the model and the initial conditions are close to the real physical situation which can be realized in the system of cold trapped ion perturbed by two lasers fields with close frequencies. (c) 2000 American Institute of Physics.

  12. Vehicle Technologies Program Implementation

    SciTech Connect

    none,

    2009-06-19

    The Vehicle Technologies Program takes a systematic approach to Program implementation. Elements of this approach include the evaluation of new technologies, competitive selection of projects and partners, review of Program and project improvement, project tracking, and portfolio management and adjustment.

  13. DOE's Tribal Energy Program

    Energy Saver

    Wind 80 Solar 247 Water 50 Buildings 222 FEMP 32 WIP 270 Hydrogen & Fuel Cells 174 Biomass 220 Industrial 96 Infrastructure ... DOE's Tribal Energy Program Program Funding History Program ...

  14. DOE Laboratory Accreditation Program

    Energy.gov [DOE]

    Administered by the Office of Worker Safety and Health Policy, the DOE Laboratory Accreditation Program (DOELAP) is responsible for implementing performance standards for DOE contractor external dosimetry and radiobioassay programs through periodic performance testing and on-site program assessments.

  15. Y-12 Apprentice Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Apprentice Program Over the years Y-12 has produced numerous training programs. Many of them have been developed at Y-12 to meet special needs. The training programs have ranged...

  16. Parallel preconditioning for the solution of nonsymmetric banded linear systems

    SciTech Connect

    Amodio, P.; Mazzia, F.

    1994-12-31

    Many computational techniques require the solution of banded linear systems. Common examples derive from the solution of partial differential equations and of boundary value problems. In particular the authors are interested in the parallel solution of block Hessemberg linear systems Gx = f, arising from the solution of ordinary differential equations by means of boundary value methods (BVMs), even if the considered preconditioning may be applied to any block banded linear system. BVMs have been extensively investigated in the last few years and their stability properties give promising results. A new class of BVMs called Reverse Adams, which are BV-A-stable for orders up to 6, and BV-A{sub 0}-stable for orders up to 9, have been studied.

  17. New non-linear photovoltaic effect in uniform bipolar semiconductor

    SciTech Connect

    Volovichev, I.

    2014-11-21

    A linear theory of the new non-linear photovoltaic effect in the closed circuit consisting of a non-uniformly illuminated uniform bipolar semiconductor with neutral impurities is developed. The non-uniform photo-excitation of impurities results in the position-dependant current carrier mobility that breaks the semiconductor homogeneity and induces the photo-electromotive force (emf). As both the electron (or hole) mobility gradient and the current carrier generation rate depend on the light intensity, the photo-emf and the short-circuit current prove to be non-linear functions of the incident light intensity at an arbitrarily low illumination. The influence of the sample size on the photovoltaic effect magnitude is studied. Physical relations and distinctions between the considered effect and the Dember and bulk photovoltaic effects are also discussed.

  18. Confirming the Lanchestrian linear-logarithmic model of attrition

    SciTech Connect

    Hartley, D.S. III.

    1990-12-01

    This paper is the fourth in a series of reports on the breakthrough research in historical validation of attrition in conflict. Significant defense policy decisions, including weapons acquisition and arms reduction, are based in part on models of conflict. Most of these models are driven by their attrition algorithms, usually forms of the Lanchester square and linear laws. None of these algorithms have been validated. The results of this paper confirm the results of earlier papers, using a large database of historical results. The homogeneous linear-logarithmic Lanchestrian attrition model is validated to the extent possible with current initial and final force size data and is consistent with the Iwo Jima data. A particular differential linear-logarithmic model is described that fits the data very well. A version of Helmbold's victory predicting parameter is also confirmed, with an associated probability function. 37 refs., 73 figs., 68 tabs.

  19. APPLICATION OF NEURAL NETWORK ALGORITHMS FOR BPM LINEARIZATION

    SciTech Connect

    Musson, John C.; Seaton, Chad; Spata, Mike F.; Yan, Jianxun

    2012-11-01

    Stripline BPM sensors contain inherent non-linearities, as a result of field distortions from the pickup elements. Many methods have been devised to facilitate corrections, often employing polynomial fitting. The cost of computation makes real-time correction difficult, particulalry when integer math is utilized. The application of neural-network technology, particularly the multi-layer perceptron algorithm, is proposed as an efficient alternative for electrode linearization. A process of supervised learning is initially used to determine the weighting coefficients, which are subsequently applied to the incoming electrode data. A non-linear layer, known as an ?activation layer,? is responsible for the removal of saturation effects. Implementation of a perceptron in an FPGA-based software-defined radio (SDR) is presented, along with performance comparisons. In addition, efficient calculation of the sigmoidal activation function via the CORDIC algorithm is presented.

  20. Energy Smart Grocer Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture EnergySmart Grocer Program Close-out BPA and CLEAResult have concluded negotiations...

  1. Graduate Research Assistant Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Living in Los Alamos Ombuds Program Scholarships Student Association Autobiographies Student Programs Advisory Committee (internal) 2015 Student Liaison Contact List (pdf)

  2. TMAC User Program

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  3. " Generation by Program Sponsorship...

    Energy Information Administration (EIA) (indexed site)

    A49. Total Inputs of Energy for Heat, Power, and Electricity" " Generation by Program Sponsorship, Industry Group, Selected" " Industries, and Type of Energy-Management Program, ...

  4. " Generation, by Program Sponsorship...

    Energy Information Administration (EIA) (indexed site)

    by Total Inputs of Energy for Heat, Power, and Electricity" " Generation, by Program Sponsorship, Industry Group, Selected" " Industries, and Type of Energy-Management Program, ...

  5. TECHNOLOGY PROGRAM PLAN

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... against business environment risk, reducing program dependency on a single developer. ... U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN CHAPTER 2: SOLID OXIDE FUEL CELLS ...

  6. Defense Waste Management Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear Energy ... Twitter Google + Vimeo Newsletter Signup SlideShare Defense Waste Management Programs ...

  7. NREL: Education Center - Programs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Education Center Printable Version Programs NREL's Education Center in Golden, Colorado, offers a variety of program topics and experiences for students and adult groups addressing...

  8. Hydrogen Program Overview

    Publication and Product Library

    This 2-page fact sheet provides a brief introduction to the DOE Hydrogen Program. It describes the program mission and answers the question: Why Hydrogen?

  9. Employee Concerns Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contract ECP Employee Concerns Program Employees Concern Program provides a place for ... with a mechanism to report employee concerns without fear of retaliation and ...

  10. Hydropower Program Technology Overview

    SciTech Connect

    Not Available

    2001-10-01

    New fact sheets for the DOE Office of Power Technologies (OPT) that provide technology overviews, description of DOE programs, and market potential for each OPT program area.

  11. Civilian Nuclear Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Civilian Nuclear Program Civilian Nuclear Program Los Alamos is committed to using its advanced nuclear expertise and unique facilities to meet the civilian nuclear national ...

  12. USABC Program Highlights

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  13. DOE's Tribal Energy Program

    Energy.gov [DOE] (indexed site)

    and Programs, the Tribal Energy Program provides financial and technical assistance to Tribes to develop their renewable energy resources and reduce their energy consumption. ...

  14. Weapons Program Associate Directors

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    integration we have achieved between the various components of the program," said Bret Knapp, Principal Associate Director for Weapons Programs. "They have both done an...

  15. Fire Protection Program

    Energy.gov [DOE]

    Department of Energy (DOE) Fire Protection Program provides published fire safety directives (orders, standards, and guidance documents), a range of oversight activities, an annual fire protection program summary.

  16. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOEpatents

    Coffey, Howard T.

    1993-01-01

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle leviation.

  17. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOEpatents

    Coffey, H.T.

    1993-10-19

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle levitation. 3 figures.

  18. Search for Linear Polarization of the Cosmic Background Radiation

    DOE R&D Accomplishments

    Lubin, P. M.; Smoot, G. F.

    1978-10-01

    We present preliminary measurements of the linear polarization of the cosmic microwave background (3 deg K blackbody) radiation. These ground-based measurements are made at 9 mm wavelength. We find no evidence for linear polarization, and set an upper limit for a polarized component of 0.8 m deg K with a 95% confidence level. This implies that the present rate of expansion of the Universe is isotropic to one part in 10{sup 6}, assuming no re-ionization of the primordial plasma after recombination

  19. LDRD final report on a unified linear reference system

    SciTech Connect

    Espinoza, J. Jr.; Mackoy, R.D.; Fletcher, D.R.

    1997-06-01

    The purpose of the project was to describe existing deficiencies in Geographic Information Systems for transportation (GIS-T) applications and prescribe solutions that would benefit the transportation community in general. After an in-depth literature search and much consultation with noted transportation experts, the need for a common linear reference system that integrated and supported the planning and operational needs of the transportation community became very apparent. The focus of the project was set on a unified linear reference system and how to go about its requirements definition, design, implementation, and promulgation to the transportation community.

  20. Klystron switching power supplies for the Internation Linear Collider

    SciTech Connect

    Fraioli, Andrea; /Cassino U. /INFN, Pisa

    2009-12-01

    The International Linear Collider is a majestic High Energy Physics particle accelerator that will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. ILC will complement the Large Hadron Collider (LHC), a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, by producing electron-positron collisions at center of mass energy of about 500 GeV. In particular, the subject of this dissertation is the R&D for a solid state Marx Modulator and relative switching power supply for the International Linear Collider Main LINAC Radio Frequency stations.

  1. LDRD final report : autotuning for scalable linear algebra.

    SciTech Connect

    Heroux, Michael Allen; Marker, Bryan

    2011-09-01

    This report summarizes the progress made as part of a one year lab-directed research and development (LDRD) project to fund the research efforts of Bryan Marker at the University of Texas at Austin. The goal of the project was to develop new techniques for automatically tuning the performance of dense linear algebra kernels. These kernels often represent the majority of computational time in an application. The primary outcome from this work is a demonstration of the value of model driven engineering as an approach to accurately predict and study performance trade-offs for dense linear algebra computations.

  2. Linear-array ultrasonic waveguide transducer for under sodium viewing.

    SciTech Connect

    Sheen, S. H.; Chien, H. T.; Wang, K.; Lawrence, W. P.; Engel, D.; Nuclear Engineering Division

    2010-09-01

    In this report, we first present the basic design of a low-noise waveguide and its performance followed by a review of the array transducer technology. The report then presents the concept and basic designs of arrayed waveguide transducers that can apply to under-sodium viewing for in-service inspection of fast reactors. Depending on applications, the basic waveguide arrays consist of designs for sideway and downward viewing. For each viewing application, two array geometries, linear and circular, are included in design analysis. Methods to scan a 2-D target using a linear array waveguide transducer are discussed. Future plan to develop a laboratory array waveguide prototype is also presented.

  3. Beamstrahlung spectra in next generation linear colliders. Revision

    SciTech Connect

    Barklow, T.; Chen, P.; Kozanecki, W.

    1992-04-01

    For the next generation of linear colliders, the energy loss due to beamstrahlung during the collision of the e{sup +}e{sup {minus}} beams is expected to substantially influence the effective center-of-mass energy distribution of the colliding particles. In this paper, we first derive analytical formulae for the electron and photon energy spectra under multiple beamstrahlung processes, and for the e{sup +}e{sup {minus}} and {gamma}{gamma} differential luminosities. We then apply our formulation to various classes of 500 GeV e{sup +}e{sup {minus}} linear collider designs currently under study.

  4. Direct Probes of Linearly Polarized Gluons inside Unpolarized Hadrons

    SciTech Connect

    Boer, Danieel; Brodsky, Stanley J.; Mulders, Piet J.; Pisano, Cristian

    2011-04-01

    We show that linearly polarized gluons inside unpolarized hadrons can be directly probed in jet or heavy quark pair production in electron-hadron collisions. We discuss the simplest cos2{phi} asymmetries and estimate their maximal value, concluding that measurements of the unknown linearly polarized gluon distribution in the proton should be feasible in future Electron-Ion Collider or Large Hadron electron Collider experiments. Analogous asymmetries in hadron-hadron collisions suffer from factorization breaking contributions and would allow us to quantify the importance of initial- and final-state interactions.

  5. Loan Loss Reserve Fund Program Development | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Development Loan Loss Reserve Fund Program Development Typically, grantees will work with interested parties or partners to develop a clean energy loan and a loan loss reserve fund program that involves the following steps: Structuring and designing the finance program, informed by market research Conducting outreach to financial institutions and, in many cases, preparing a request for proposal from financial institutions Developing, negotiating, and implementing agreements.

  6. Assistance Program, State Energy Program, Energy Efficiency and...

    Energy Saver

    Assistance Program, State Energy Program, Energy Efficiency and Conservation Block Grants Assistance Program, State Energy Program, Energy Efficiency and Conservation Block Grants ...

  7. Cosmic bubble and domain wall instabilities I: parametric amplification of linear fluctuations

    SciTech Connect

    Braden, Jonathan; Bond, J. Richard; Mersini-Houghton, Laura

    2015-03-03

    This is the first paper in a series where we study collisions of nucleated bubbles taking into account the effects of small initial (quantum) fluctuations in a fully 3+1-dimensional setting. In this paper, we consider the evolution of linear fluctuations around highly symmetric though inhomogeneous backgrounds. In particular, we demonstrate that a large degree of asymmetry develops over time from tiny initial fluctuations superposed upon planar and SO(2,1) symmetric backgrounds. These fluctuations are inevitable consequences of zero-point vacuum oscillations, so excluding them by enforcing a high degree of spatial symmetry is inconsistent in a quantum treatment. To simplify the analysis we consider the limit of two colliding planar walls, with mode functions for the fluctuations characterized by the wavenumber transverse to the collision direction and a longitudinal shape along the collision direction x, which we solve for. In the linear regime, the fluctuations obey a linear wave equation with a time- and space-dependent mass m{sub eff}(x,t). In situations where the walls collide multiple times, m{sub eff} oscillates in time. We use Floquet theory to study the evolution of the fluctuations and generalize the calculations familiar from the preheating literature to the case with many coupled degrees of freedom. The inhomogeneous case has bands of unstable transverse wavenumbers k{sub ⊥} whose corresponding mode functions grow exponentially. By examining the detailed spatial structure of the mode functions in x, we identify both broad and narrow parametric resonance generalizations of the homogeneous m{sub eff}(t) case of preheating. The unstable k{sub ⊥} modes are longitudinally localized, yet can be described as quasiparticles in the Bogoliubov sense. We define an effective occupation number and show they are created in bursts for the case of well-defined collisions in the background. The transverse-longitudinal coupling accompanying nonlinearity radically

  8. DOE Publishes CALiPER Report on Linear (T8) LED Lamps in a 2x4 K12-Lensed Troffer

    Energy.gov [DOE]

    The U.S. Department of Energy's CALiPER program has released Report 21.1, which is part of a series of investigations on linear LED lamps. Report 21.1 focuses on the performance of 31 types of...

  9. Interactive Beam-Dynamics Program

    Energy Science and Technology Software Center

    2001-01-08

    TRACE3D is an interactive program that calculates the envelopes of a bunched beam, including linear space-charge forces, through a user-defined system. The transport system may consist of the following elements: drift, thin lens, quadrupole, permanent magnet quadrupole, solenoid, doublet, triplet, bending magnet, edge angle (for bend), RF gap, radio-frequency-quadrupole cell, RF cavity, coupled-cavity tank, user-desired element, coordinate rotation, and identical element. The beam is represented by a 6X6 matrix defining a hyper-ellipsoid in six-dimensional phasemore » space. The projection of this hyperellipsoid on any two-dimensional plane is an ellipse that defines the boundary of the beam in that plane.« less

  10. Program Assignments | Department of Energy

    Energy Saver

    Balanced Scorecard Program Officer Contractual Services Budget Officer Headquarters Purchase Card Program Headquarters Contract Closeout Headquarters Data Mining Programs Strategic ...

  11. Voluntary Protection Program | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Voluntary Protection Program

  12. Internship Programs Calendar | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Internship Programs Calendar

  13. SIMULTANEOUS LINEAR AND CIRCULAR OPTICAL POLARIMETRY OF ASTEROID (4) VESTA

    SciTech Connect

    Wiktorowicz, Sloane J.; Nofi, Larissa A.

    2015-02-10

    From a single 3.8 hr observation of the asteroid (4) Vesta at 13.7 phase angle with the POlarimeter at Lick for Inclination Studies of Hot jupiters 2 (POLISH2) at the Lick Observatory Shane 3 m telescope, we confirm rotational modulation of linear polarization in the B and V bands. We measure the peak-to-peak modulation in the degree of linear polarization to be ?P = (294 35) 10{sup ?6} (ppm) and time-averaged ?P/P = 0.0575 0.0069. After rotating the plane of linear polarization to the scattering plane, asteroidal rotational modulation is detected with 12? confidence and observed solely in Stokes Q/I. POLISH2 simultaneously measures Stokes I, Q, U (linear polarization), and V (circular polarization), but we detect no significant circular polarization with a 1? upper limit of 78 ppm in the B band. Circular polarization is expected to arise from multiple scattering of sunlight by rough surfaces, and it has previously been detected in nearly all other classes of solar system bodies except for asteroids. Subsequent observations may be compared with surface albedo maps from the Dawn Mission, which may allow the identification of compositional variation across the asteroidal surface. These results demonstrate the high accuracy achieved by POLISH2 at the Lick 3 m telescope, which is designed to directly detect scattered light from spatially unresolvable exoplanets.

  14. Tunneling control using classical non-linear oscillator

    SciTech Connect

    Kar, Susmita; Bhattacharyya, S. P.

    2014-04-24

    A quantum particle is placed in symmetric double well potential which is coupled to a classical non-linear oscillator via a coupling function. With different spatial symmetry of the coupling and under various controlling fashions, the tunneling of the quantum particle can be enhanced or suppressed, or totally destroyed.

  15. Position sensor for linear synchronous motors employing halbach arrays

    SciTech Connect

    Post, Richard Freeman

    2014-12-23

    A position sensor suitable for use in linear synchronous motor (LSM) drive systems employing Halbach arrays to create their magnetic fields is described. The system has several advantages over previously employed ones, especially in its simplicity and its freedom from being affected by weather conditions, accumulated dirt, or electrical interference from the LSM system itself.

  16. Annular linear induction pump with an externally supported duct

    DOEpatents

    Craig, Edwin R.; Semken, Robert S.

    1979-01-01

    Several embodiments of an annular linear induction pump for pumping liquid metals are disclosed having the features of generally one pass flow of the liquid metal through the pump and an increased efficiency resulting from the use of thin duct walls to enclose the stator. The stator components of this pump are removable for repair and replacement.

  17. Scalable Library for the Parallel Solution of Sparse Linear Systems

    Energy Science and Technology Software Center

    1993-07-14

    BlockSolve is a scalable parallel software library for the solution of large sparse, symmetric systems of linear equations. It runs on a variety of parallel architectures and can easily be ported to others. BlockSovle is primarily intended for the solution of sparse linear systems that arise from physical problems having multiple degrees of freedom at each node point. For example, when the finite element method is used to solve practical problems in structural engineering, eachmore » node will typically have anywhere from 3-6 degrees of freedom associated with it. BlockSolve is written to take advantage of problems of this nature; however, it is still reasonably efficient for problems that have only one degree of freedom associated with each node, such as the three-dimensional Poisson problem. It does not require that the matrices have any particular structure other than being sparse and symmetric. BlockSolve is intended to be used within real application codes. It is designed to work best in the context of our experience which indicated that most application codes solve the same linear systems with several different right-hand sides and/or linear systems with the same structure, but different matrix values multiple times.« less

  18. SLAC linear collider: the machine, the physics, and the future

    SciTech Connect

    Richter, B.

    1981-11-01

    The SLAC linear collider, in which beams of electrons and positrons are accelerated simultaneously, is described. Specifications of the proposed system are given, with calculated preditions of performance. New areas of research made possible by energies in the TeV range are discussed. (GHT)

  19. Translation and integration of numerical atomic orbitals in linear molecules

    SciTech Connect

    Heinäsmäki, Sami

    2014-02-14

    We present algorithms for translation and integration of atomic orbitals for LCAO calculations in linear molecules. The method applies to arbitrary radial functions given on a numerical mesh. The algorithms are based on pseudospectral differentiation matrices in two dimensions and the corresponding two-dimensional Gaussian quadratures. As a result, multicenter overlap and Coulomb integrals can be evaluated effectively.

  20. Biomass Program Overview

    SciTech Connect

    2010-01-01

    This document provides an overview of the Biomass Program's mission, strategic goals, and research approach.

  1. ARM - Program Fact Sheets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MaterialsProgram Fact Sheets Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures Acronyms Glossary Logos Contacts RSS for Publications Information Materials Annual Reports Program Fact Sheets Campaign Backgrounders Education and Outreach Posters Brochures Research Highlights Summaries Program Fact Sheets Please contact

  2. Laser Programs Highlights 1998

    SciTech Connect

    Lowdermilk, H.; Cassady, C.

    1999-12-01

    This report covers the following topics: Commentary; Laser Programs; Inertial Confinement Fusion/National Ignition Facility (ICF/NIF); Atomic Vapor Laser Isotope Separation (AVLIS); Laser Science and Technology (LS&T); Information Science and Technology Program (IS&T); Strategic Materials Applications Program (SMAP); Medical Technology Program (MTP) and Awards.

  3. Regional Energy Efficiency Programs

    Energy.gov [DOE]

    This presentation covers regional industrial energy efficiency programs in the Midwest, Southeast, and Southwest.

  4. Light water reactor program

    SciTech Connect

    Franks, S.M.

    1994-12-31

    The US Department of Energy`s Light Water Reactor Program is outlined. The scope of the program consists of: design certification of evolutionary plants; design, development, and design certification of simplified passive plants; first-of-a-kind engineering to achieve commercial standardization; plant lifetime improvement; and advanced reactor severe accident program. These program activities of the Office of Nuclear Energy are discussed.

  5. Better Buildings Neighborhood Program

    Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: Business Models Guide, October 27, 2011.

  6. SEP Program Planning Template ("Program Planning Template") ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    File Program Planning Template More Documents & Publications Commute Mode Switching Impact Tool Energy Intensity Indicators Data Refrigerator-Freezers (multiple defrost waiver)...

  7. Tribal Energy Program - 2009 Program Review - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Registration starts at 12:00 p.m. on Monday and at 8:00 a.m. Tuesday through Thursday. DETAILED AGENDA 2016 Office of Indian Energy Program Review November 14-17, 2016 MONDAY, NOVEMBER 14 (1:00 p.m.-5:30 p.m.) TIME DESCRIPTION PRESENTERS 12:00 p.m. Registration 1:00 p.m. Invocation 1:10 p.m. Welcoming Remarks Director, DOE Office of Indian Energy Policy and Chris Deschene Programs Indian Energy Program Moderator: Lizana Pierce (DOE) 1:40 p.m. DOE Indian Energy Program Overview Lizana Pierce 2:20

  8. Text-Alternative Version: MSSLC Member Case Studies - LED Street Lighting

    Energy Saver

    Programs Webinar | Department of Energy MSSLC Member Case Studies - LED Street Lighting Programs Webinar Text-Alternative Version: MSSLC Member Case Studies - LED Street Lighting Programs Webinar Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013. Edward Smalley: Good morning. Welcome ladies and gentlemen. I'm Edward Smalley with Seattle City Light, Seattle's publicly-owned utility. As Director of the

  9. Technology Commercialization Program 1991

    SciTech Connect

    Not Available

    1991-11-01

    This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

  10. LANSCE | Users | User Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    LANSCE User Program LANSCE's User Program ensures the research it oversees represents the cutting edge of nuclear and materials science and technology. The User Program plays a key role in training the next generation of top scientists, attracting the best graduate students, postdoctoral researchers, and early-career scientists (defined as those less than 40-years old). The User Program typically begins with the first call for proposals and run until the end of the run-cycle. The User-Program

  11. Centralized Procurement Program

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Centralized Procurement Program What's New Who to Contact Current Products BOAs MOC Integrated Team Program Elements Future Products Welcome to the Carlsbad Field Office’s (CBFO) Centralized Procurement Program (CPP) Web Page. The purpose of the Centralized Procurement Program is to provide a standardized, economical system of acquisition and distribution of containers and equipment used for shipping Transuranic (TRU) Waste to the Waste Isolation Pilot Plant (WIPP). The program is available

  12. LDRD Program Plan master

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory-Directed Research and Development Program FY2016 Program Plan Thomas Jefferson National Accelerator Facility Newport News, Virginia Thomas Jefferson National Accelerator Facility Laboratory-Directed Research and Development Program FY2016 Program Plan Introduction The Thomas Jefferson National Accelerator Facility (Jefferson Lab) Laboratory- Directed Research and Development (LDRD) program was planned through a formal management process consistent with DOE Order 413.2B, including

  13. Geothermal Technologies Program Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Jay Nathwani Acting Program Manager Geothermal Technologies Program Office of Energy Efficiency and Renewable Energy The Geothermal Technologies Program Overview May 18 2010 Energy Efficiency & Renewable Energy eere.energy.gov Geothermal Technologies Program (GTP) Program Topic Areas *Low Temperature, Geopressured and Coproduced Resources *Innovative Exploration Technologies National Goals *Economy Putting people to work in the near- term, and in the future *Security Developing and expanding

  14. Introduction to Control Theory. Part 2. Laplace Transforms and Linear Systems

    SciTech Connect

    Scheinker, Alexander

    2015-09-11

    Presentation for summer students. Start by considering linear differential equations, and how to solve them. The Laplace Transform is a great tool for solving linear differential equations.

  15. Time-of-flight secondary ion mass spectrometry of deuterated linear poly(dimethylsiloxane)

    SciTech Connect

    Zhang, X.K.; Stuart, J.O.; Clarson, S.J. ); Sabata, A. ); Beaucage, G. )

    1994-08-29

    Mass spectrometry (MS) has previously proved to be very valuable for characterizing the thermal decomposition of poly-(dimethylsiloxane) (PDMS) via pyrolysis-MS. Secondary ion mass spectrometry (SIMS) has also been applied to identify the various fragments characteristic of PDMS and thus give fingerprint'' spectra for identification purposes. This paper describes the characterization of deuterated linear PDMS -[(CD[sub 3])[sub 2]SiO][sub n]- using time-of-flight secondary ion mass spectrometry. The work is part of a program investigating the conformations and interactions of deuterated siloxanes in isotopic blends -[(CD[sub 3])[sub 2]SiO][sub n]-/-[CH[sub 3][sub 2]SiO][sub n]- using small-angle neutron scattering. It is therefore clearly important to demonstrate that no deuterium/hydrogen exchanges occurred during the synthetic methodology used.

  16. CASE STUDY WEBINAR: SUSTAINED ENERGY SAVINGS ACHIEVED THROUGH SUCCESSFUL

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INDUSTRIAL CUSTOMER INTERACTION WITH RATEPAYER PROGRAMS, DECEMBER 10 | Department of Energy CASE STUDY WEBINAR: SUSTAINED ENERGY SAVINGS ACHIEVED THROUGH SUCCESSFUL INDUSTRIAL CUSTOMER INTERACTION WITH RATEPAYER PROGRAMS, DECEMBER 10 CASE STUDY WEBINAR: SUSTAINED ENERGY SAVINGS ACHIEVED THROUGH SUCCESSFUL INDUSTRIAL CUSTOMER INTERACTION WITH RATEPAYER PROGRAMS, DECEMBER 10 December 10, 2015 12:00PM to 1:00PM EST Sandy Glatt with the U.S. Department of Energy's Advanced Manufacturing Office

  17. Linear motor drive system for continuous-path closed-loop position control of an object

    DOEpatents

    Barkman, William E.

    1980-01-01

    A precision numerical controlled servo-positioning system is provided for continuous closed-loop position control of a machine slide or platform driven by a linear-induction motor. The system utilizes filtered velocity feedback to provide system stability required to operate with a system gain of 100 inches/minute/0.001 inch of following error. The filtered velocity feedback signal is derived from the position output signals of a laser interferometer utilized to monitor the movement of the slide. Air-bearing slides mounted to a stable support are utilized to minimize friction and small irregularities in the slideway which would tend to introduce positioning errors. A microprocessor is programmed to read command and feedback information and converts this information into the system following error signal. This error signal is summed with the negative filtered velocity feedback signal at the input of a servo amplifier whose output serves as the drive power signal to the linear motor position control coil.

  18. TFE Verification Program

    SciTech Connect

    Not Available

    1990-03-01

    The objective of the semiannual progress report is to summarize the technical results obtained during the latest reporting period. The information presented herein will include evaluated test data, design evaluations, the results of analyses and the significance of results. The program objective is to demonstrate the technology readiness of a TFE suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW(e) range, and a full-power life of 7 years. The TF Verification Program builds directly on the technology and data base developed in the 1960s and 1970s in an AEC/NASA program, and in the SP-100 program conducted in 1983, 1984 and 1985. In the SP-100 program, the attractive but concern was expressed over the lack of fast reactor irradiation data. The TFE Verification Program addresses this concern. The general logic and strategy of the program to achieve its objectives is shown on Fig. 1-1. Five prior programs form the basis for the TFE Verification Program: (1) AEC/NASA program of the 1960s and early 1970; (2) SP-100 concept development program;(3) SP-100 thermionic technology program; (4) Thermionic irradiations program in TRIGA in FY-86; (5) and Thermionic Technology Program in 1986 and 1987. 18 refs., 64 figs., 43 tabs.

  19. ILC Marx Modulator Development Program Status

    SciTech Connect

    Burkhart, C.; Beukers, T.; Larsen, R.; Macken, K.; Nguyen, M.; Olsen, J.; Tang, T.; /SLAC

    2009-03-04

    Development of a first generation prototype (P1) Marx-topology klystron modulator for the International Linear Collider is nearing completion at the Stanford Linear Accelerator Center. It is envisioned as a smaller, lower cost, and higher reliability alternative to the present, bouncer-topology, 'Baseline Conceptual Design'. The Marx presents several advantages over conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at ILC parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. The P1-Marx employs all solid state elements; IGBTs and diodes, to control the charge, discharge and isolation of the cells. A general overview of the modulator design and the program status are presented.

  20. Visual Outcome in Meningiomas Around Anterior Visual Pathways Treated With Linear Accelerator Fractionated Stereotactic Radiotherapy

    SciTech Connect

    Stiebel-Kalish, Hadas; Reich, Ehud; Gal, Lior; Rappaport, Zvi Harry; Nissim, Ouzi; Pfeffer, Raphael; Spiegelmann, Roberto

    2012-02-01

    Purpose: Meningiomas threatening the anterior visual pathways (AVPs) and not amenable for surgery are currently treated with multisession stereotactic radiotherapy. Stereotactic radiotherapy is available with a number of devices. The most ubiquitous include the gamma knife, CyberKnife, tomotherapy, and isocentric linear accelerator systems. The purpose of our study was to describe a case series of AVP meningiomas treated with linear accelerator fractionated stereotactic radiotherapy (FSRT) using the multiple, noncoplanar, dynamic conformal rotation paradigm and to compare the success and complication rates with those reported for other techniques. Patients and Methods: We included all patients with AVP meningiomas followed up at our neuro-ophthalmology unit for a minimum of 12 months after FSRT. We compared the details of the neuro-ophthalmologic examinations and tumor size before and after FSRT and at the end of follow-up. Results: Of 87 patients with AVP meningiomas, 17 had been referred for FSRT. Of the 17 patients, 16 completed >12 months of follow-up (mean 39). Of the 16 patients, 11 had undergone surgery before FSRT and 5 had undergone FSRT as first-line management. Tumor control was achieved in 14 of the 16 patients, with three meningiomas shrinking in size after RT. Two meningiomas progressed, one in an area that was outside the radiation field. The visual function had improved in 6 or stabilized in 8 of the 16 patients (88%) and worsened in 2 (12%). Conclusions: Linear accelerator fractionated RT using the multiple noncoplanar dynamic rotation conformal paradigm can be offered to patients with meningiomas that threaten the anterior visual pathways as an adjunct to surgery or as first-line treatment, with results comparable to those reported for other stereotactic RT techniques.