National Library of Energy BETA

Sample records for light sweet mars

  1. Yemen's light, sweet Alif crude assayed

    SciTech Connect

    Rhodes, A.K.

    1994-05-23

    Crude oil from Yemen's Alif field has been assayed. The light sweet crude, also known as Marib, is part of the Marib al-Jawf concession in northern Yemen. Alif field was discovered in 1984 by Hunt Oil Co. The field was declared commercial in November 1985. Alif production averaged 118,500 b/d in 1992. Physical and chemical properties are listed for the whole crude and its fractions.

  2. Australia`s Cossack crude oil is light and sweet

    SciTech Connect

    Rhodes, A.K.

    1997-05-05

    In early 1995, the characteristics of Australia`s light, sweet Cossack crude were analyzed. The 47{degree} API, 0.03 wt% crude oil is produced off the coast of Western Australia. Woodside Petroleum Pty. Group started production from the Wanaea/Cossack complex in late 1995. Wanea is produced from five conventional subsea wells and Cossack from one horizontal subsea well. This paper lists physical and chemical properties for the whole crude and fractions.

  3. Los Alamos instrument to shine light on Mars habitability

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory last week is relying in part on an instrument originally developed at Los Alamos called ChemCam, which will use blasts of laser energy to remotely probe Mars's surface. ...

  4. LANL Instrument to Shine Light on Mars Habitability | National...

    National Nuclear Security Administration (NNSA)

    called ChemCam, which will use blasts of laser energy to remotely probe Mars's surface. ... Chemcam When ChemCam fires its extremely powerful laser pulse, it will vaporize an area ...

  5. Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code

    SciTech Connect

    Rakhno, I. L.; Mokhov, N. V.; Gudima, K. K.

    2015-04-25

    An implementation of both ALICE code and TENDL evaluated nuclear data library in order to describe nuclear reactions induced by low-energy projectiles in the Monte Carlo code MARS15 is presented. Comparisons between results of modeling and experimental data on reaction cross sections and secondary particle distributions are shown.

  6. Sweet Surface Area

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Sweet Surface Area Sweet Surface Area Create a delicious root beer float and learn sophisticated science concepts at the same time. Sweet Surface Area Science is all around us, so why not have some delicious fun while we do it? The process of making a root beer float (PDF) is simple but it involves some pretty sophisticated scientific concepts. Carbonation, surface area, viscosity, and temperature all play a roll in creating a treat that is up to your personal highest standards

  7. Sweet Sunbeams and Creative Catalysts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sweet Sunbeams and Creative Catalysts Sweet Sunbeams and Creative Catalysts March 4, 2013 - 2:49pm Addthis These tiny green crystals, measuring just millionths of a meter, preserve the molecular structure and activity of Photosystem II, which carries out the oxygen-releasing process in photosynthesis. The chlorophyll-containing crystals, which have a boxlike structure, were studied at room temperature using ultrashort X-ray pulses at SLAC's Linac Coherent Light Source X-ray laser. The image was

  8. Why Mars?

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars? Why Mars? The allure (and challenge) of colonizing the red planet May 17, 2016 Mars Mars is the fourth planet from the sun. Why Mars? The allure (and challenge) of colonizing the red planet On May 30, Mars and Earth will get close. Really close. With a distance between them of only 46.8 million miles, it's the nearest the two planets will be to each other in their respective orbits. While nearly 50 million miles might still seem far away (because it is), when you consider the average

  9. Curiosity rover finds evidence of Mars' primitive continental crust

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Curiosity rover finds evidence of Mars' primitive continental crust Curiosity rover finds evidence of Mars' primitive continental crust This is the first discovery of a potential "continental crust" on Mars. July 13, 2015 Igneous clast named Harrison embedded in a conglomerate rock in Gale crater, Mars, shows elongated light-toned feldspar crystals. The mosaic merges an image from Mastcam with higher-resolution images from ChemCam's Remote Micro-Imager. Credit:

  10. Preservation of sweet sorghum biomass

    SciTech Connect

    Jasberg, B.K.; Montgomery, R.R.; Anderson, R.A.

    1983-01-01

    Sweet sorghum stalks (42% sugar, dry basis (d.b.)) and bagasse (10% sugar, d.b.) from a cane mill were stored to preserve sugar. Bagasse and stalks were stored outdoors in sealed containers (anaerobic conditions). Treatments included using carbon dioxide or sulfur dioxide atmospheres or surface spraying with propionic acid or aqueous ammonia. Stalks were also stored outdoors under aerobic conditions. Treatments included drying the stalks or spraying with propionic acid. After 200 days, propionic acid (anaerobic) and SO/sub 2/-treated stalks had 34% and 19% of the original sugar remaining, respectively. No other samples had more than 3% of the original sugar remaining. 28 references, 6 tables.

  11. MARS - Facilities - Cyclotron Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Momentum Achromat Recoil Separator - MARS Layout of MARS. MARS is used to produce and separate exotic nuclei. These nuclei are later used as radioactive beams or for nuclear decay ...

  12. NASA Mars Conference

    SciTech Connect

    Reiber, D.B.

    1988-01-01

    Papers about Mars and Mars exploration are presented, covering topics such as Martian history, geology, volcanism, channels, moons, atmosphere, meteorology, water on the planet, and the possibility of life. The unmanned exploration of Mars is discussed, including the Phobos Mission, the Mars Observer, the Mars Aeronomy Observer, the seismic network, Mars sample return missions, and the Mars Ball, an inflatable-sectored-tire rover concept. Issues dealing with manned exploration of Mars are examined, such as the reasons for exploring Mars, mission scenarios, a transportation system for routine visits, technologies for Mars expeditions, the human factors for Mars missions, life support systems, living and working on Mars, and the report of the National Commission on Space.

  13. Cyclotron Institute » MARS

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MARS MARS Spectrometer MARS is used to produce and separate exotic nuclei. These nuclei are later used as radioactive beams or for nuclear decay studies. Radioactive Nuclear Beams are produced with MARS in kinematically inverted reactions induced by heavy projectiles from the K500 superconducting cyclotron on a cryogenic hydrogen gas target. MARS has a good mass resolution and a very good beam rejection factor, leading to clean, high quality secondary beams. The secondary beams are used in the

  14. Water for future Mars astronauts?

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Water for future Mars astronauts? Water for future Mars astronauts? Within its first three months on Mars, NASA's Curiosity Rover saw a surprising diversity of soils and sediments ...

  15. Efficiency Lighting & Maintenance Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    & Maintenance Inc Jump to: navigation, search Name: Efficiency Lighting & Maintenance Inc Address: 5a Del Mar Drive Place: Brookfield, Connecticut Zip: 06804 Region: Northeast - NY...

  16. Mars Science Laboratory on Saturday, Los Alamos National Laboratory...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    light on Mars habitability November 28, 2011 LANL ChemCam will help unravel mysteries of Red Planet's composition LOS ALAMOS, New Mexico, November 28, 2011-With the successful...

  17. Sweet Spot Supersymmetry and Composite Messengers

    SciTech Connect

    Ibe, Masahiro; Kitano, Ryuichiro

    2007-10-30

    Sweet spot supersymmetry is a phenomenologically and cosmologically perfect framework to realize a supersymmetric world at short distance. We discuss a class of dynamical models of supersymmetry breaking and its mediation whose low-energy effective description falls into this framework. Hadron fields in the dynamical models play a role of the messengers of the supersymmetry breaking. As is always true in the models of the sweet spot supersymmetry, the messenger scale is predicted to be 10{sup 5} GeV {approx}< M{sub mess} {approx}< 10{sup 10} GeV. Various values of the effective number of messenger fields N{sub mess} are possible depending on the choice of the gauge group.

  18. New Mexico to Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Mexico to Mars Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit New Mexico to Mars Los Alamos laser technology builds on current mission's success September 1, 2014 An artist's rendering of the SuperCam instrument atop the next-generation Mars rover scheduled to travel to the red planet in 2020. An artist's rendering of the SuperCam instrument atop the next-generation Mars rover

  19. LANL on Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    LANL on Mars Los Alamos Technology on Mars The Lab has explored space for more than 50 years and prompted many discoveries. Learn about our newest instruments aboard the Curiosity Rover and learn more about the red planet. Curious about Mars and if life ever existed on the planet? Now you can learn all about the Red Planet and the Los Alamos technologies on board the Curiosity rover exploring Mars. Update: This exhibit is now on display in Almogordo, NM, at the New Mexico Museum of Space

  20. Status of MARS Code

    SciTech Connect

    N.V. Mokhov

    2003-04-09

    Status and recent developments of the MARS 14 Monte Carlo code system for simulation of hadronic and electromagnetic cascades in shielding, accelerator and detector components in the energy range from a fraction of an electronvolt up to 100 TeV are described. these include physics models both in strong and electromagnetic interaction sectors, variance reduction techniques, residual dose, geometry, tracking, histograming. MAD-MARS Beam Line Build and Graphical-User Interface.

  1. Mars mission safety

    SciTech Connect

    Buden, D. )

    1989-06-01

    Precautions that need to be taken to assure safety on a manned Mars mission with nuclear thermal propulsion are briefly considered. What has been learned from the 1955 SNAP-10A operation of a nuclear reactor in space and from the Rover/NERVA project is reviewed. The ways that radiation hazards can be dealt with at various stages of a Mars mission are examined.

  2. Mars Rover finds changing rocks, surprising scientists

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Rover finds changing rocks, surprising scientists Mars Rover finds changing rocks, surprising scientists As NASA's Curiosity rover treks up a three-mile-high mountain on Mars, ...

  3. Mars Rover RTG Study

    SciTech Connect

    Schock, Alfred

    1989-11-27

    This report summarizes the results of a Radioisotope Thermoelectric Generator (RTG) design study conducted by Fairchild Space Company at the direction of the U.S. Department of Energy's Office of Special Applications, in support of the Mars Rover and Sample Return mission under investigation at NASA's Jet Propulsion Laboratory. Presented at the 40th Congress of the IAF, Oct. 7-13, 1989 in Torremolinos, Malaga-Spain. The paper describes the design and analysis of Radioisotope Thermoelectric Generators (RTGs) for powering the Mars Rover vehicle, which is a critical element of the unmanned Mars Rover and Sample Return mission (MRSR). The RTG design study was conducted by Fairchild Space for the U.S. DOE in support of the JPL MRSR Project. The paper briefly describes a reference mission scenario, an illustrative Rover design and activity pattern on Mars, and its power system requirements and environmental constraints, including the RTG cooling requirements during transit to Mars. It summarizes the baseline RTG's mass breakdown, and presents a detailed description of its thermal, thermoelectric, and electrical analysis. The results presented show the RTG performance achievable with current technology, and the performance improvements that would be achievable with various technology developments. It provides a basis for selecting the optimum strategy for meeting the Mars Rover design goals with minimal programmatic risk and cost. Cross Reference CID #7135 dated 10/1989. There is a duplicate copy. This document is not relevant to the OSTI Library. Do not send.

  4. Mars Rover RTG Study

    SciTech Connect

    Schock, Alfred

    1989-10-01

    Presented at the 40th Congress of the IAF, Oct. 7-13, 1989 in Torremolinos, Malaga-Spain. The paper describes the design and analysis of Radioisotope Thermoelectric Generators (RTGs) for powering the Mars Rover vehicle, which is a critical element of the unmanned Mars Rover and Sample Return mission (MRSR). The RTG design study was conducted by Fairchild Space for the U.S. DOE in support of the JPL MRSR Project. The paper briefly describes a reference mission scenario, an illustrative Rover design and activity pattern on Mars, and its power system requirements and environmental constraints, including the RTG cooling requirements during transit to Mars. It summarizes the baseline RTG's mass breakdown, and presents a detailed description of its thermal, thermoelectric, and electrical analysis. The results presented show the RTG performance achievable with current technology, and the performance improvements that would be achievable with various technology developments. It provides a basis for selecting the optimum strategy for meeting the Mars Rover design goals with minimal programmatic risk and cost. There is a duplicate copy and three copies in the file.

  5. Unique Bioreactor Finds Algae's Sweet Spot - News Feature | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Unique Bioreactor Finds Algae's Sweet Spot February 18, 2014 Close-up photo of a vial of green algae. Enlarge image Aeration helps algae grow and helps replicate real-life ...

  6. Mars manned transportation vehicle

    SciTech Connect

    Perez-Davis, M.E.; Faymon, K.A.

    1987-07-01

    A viable power system technology for a surface transportation vehicle to explore the planet Mars is presented. A number of power traction systems were investigated, and it was found that a regenerative hydrogen-oxygen fuel cell appears to be attractive for a manned Mars rover application. Mission requirements were obtained from the Manned Mars Mission Working Group. Power systems weights, power, and reactants requirements were determined as a function of vehicle weights for vehicles weighing from 6,000 to 16,000 lb (2,722 to 7,257 kg), (Earth weight). The vehicle performance requirements were: velocity, 10 km/hr; range, 100 km; slope climbing capability, 30 deg uphill for 50 km; mission duration, 5 days; and crew, 5. Power requirements for the operation of scientific equipment and support system capabilities were also specified and included in this study. The concept developed here would also be applicable to a Lunar based vehicle for Lunar exploration. The reduced gravity on the Lunar surface, (over that on the Martian surface), would result in an increased range or capability over that of the Mars vehicle since many of the power and energy requirements for the vehicle are gravity dependent.

  7. Inhibition of sweet corrosion in subsea flowlines

    SciTech Connect

    Simon Thomas, M.J.J.; Hebert, P.B.; Jordan, K.G.; Lorimer, S.E.

    1998-12-31

    Corrosion inhibition is the principal means of corrosion control in sweet service flowlines between subsea wells and processing platforms in the Gulf of Mexico. In view of the temperatures and the well conditions, hydrate control chemicals have to be injected as well. The paper addresses the challenges of selecting corrosion inhibitors that are suitable for the prevailing flowline conditions, are compatible with hydrate inhibition, and with the materials of the subsea umbilical. Initial experience based on limited field monitoring data is reviewed. Key findings include the need to carefully consider partitioning of inhibitor components in the various liquid and gas phases along the line, the difficulties experienced with interpreting monitoring results and the perceived need for more detailed in-line corrosion monitoring. Inhibitor effectiveness is discussed in terms of a surface blocking model. One candidate inhibitor was rejected as it was ineffective under conditions of low water cut in hexane (simulated dense gas phase). Another inhibitor appears to exhibit different steady states depending on its concentration in the aqueous phase.

  8. How Sweet It Is: Agrivida's Next-Gen Sugar Biofuel | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sweet It Is: Agrivida's Next-Gen Sugar Biofuel How Sweet It Is: Agrivida's Next-Gen Sugar Biofuel December 8, 2011 - 3:03pm Addthis Agrivida's President and co-founder Mike Raab. ...

  9. Powering Mars Rovers

    SciTech Connect

    Stewert, Robin

    2010-01-01

    INL scientists are doing their best to help solve our energy problems here on Earth. But did you know the lab is playing a key role in the exploration of other worlds, too? Meet INL Engineer Robin Stewart helps build and test generators that power NASA missions to Pluto and Mars. You can learn more about INL projects at http://www.facebook.com/idahonationallaboratory.

  10. Powering Mars Rovers

    ScienceCinema

    Stewert, Robin;

    2013-05-28

    INL scientists are doing their best to help solve our energy problems here on Earth. But did you know the lab is playing a key role in the exploration of other worlds, too? Meet INL Engineer Robin Stewart helps build and test generators that power NASA missions to Pluto and Mars. You can learn more about INL projects at http://www.facebook.com/idahonationallaboratory.

  11. MARS Flight Engineering Status

    SciTech Connect

    Fast, James E.; Dorow, Kevin E.; Morris, Scott J.; Thompson, Robert C.; Willett, Jesse A.

    2010-04-06

    The Multi-sensor Airborne Radiation Survey Flight Engineering project (MARS FE) has designed a high purity germanium (HPGe) crystal array for conducting a wide range of field measurements. In addition to the HPGe detector system, a platform-specific shock and vibration isolation system and environmental housing have been designed to support demonstration activities in a maritime environment on an Unmanned Surface Vehicle (USV). This report describes the status of the equipment as of the end of FY09.

  12. Mars Rover RTG Study

    SciTech Connect

    Schock, Alfred

    1989-08-25

    This report summarizes the results of a Radioisotope Thermoelectric Generator (RTG) design study conducted by Fairchild Space Company at the direction of the U.S. Department of Energy's Office of SpecialApplications, in suppport of the Mars Rover and Sample Return mission under investigation at NASA's Jet Propulsion Laboratory. The report is a rearranged, updated, and significantly expanded amalgam of three interrelated papers presented at the 24th Intersocity Energy Conversion Engineering Conference (IECEC) at Arlington, Virginia, on August 10, 1989.

  13. Water for future Mars astronauts?

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Water for future Mars astronauts? Water for future Mars astronauts? Within its first three months on Mars, NASA's Curiosity Rover saw a surprising diversity of soils and sediments along a half-kilometer route that tell a complex story about the gradual desiccation of the Red Planet. September 26, 2013 This image shows two areas on Mars in a location named Rocknest that were scooped out by the Curiosity Rover last year. Researchers took samples of the areas to determine whether they were wetter

  14. Scaling of Sweet-Parker reconnection with secondary islands

    SciTech Connect

    Cassak, P. A.; Shay, M. A.; Drake, J. F.

    2009-12-15

    Sweet-Parker (collisional) magnetic reconnection at high Lundquist number is modified by secondary islands. Daughton et al. [Phys. Rev. Lett. 103, 065004 (2009)] suggested the Sweet-Parker model governs the fragmented current sheet segments. If true, the reconnection rate would increase by the square root of the number of secondary islands. High Lundquist number resistive magnetohydrodynamic simulations are presented which agree, in a time-averaged sense, with the predicted scaling. This result may have important implications for energy storage before a solar eruption and its subsequent release.

  15. Record of Decision for Mars 2020 Mission

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Record of Decision for Mars 2020 Mission Mars 2020 Rover instrument selection. Mars 2020 Rover instrument selection. NASA issued a record of decision (ROD) to use a nuclear battery ...

  16. Mars Hill (2006) Wind Farm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Mars Hill (2006) Wind Farm Jump to: navigation, search Name Mars Hill (2006) Wind Farm Facility Mars Hill (2006) Sector Wind energy Facility Type Commercial Scale Wind Facility...

  17. Compaction measurements on the Sweet Lake test well

    SciTech Connect

    Jogi, P.N.; Kalra, S.; Gray, K.E.; Thompson, T.W.; Bebout, D.G.; Bachman, A.L.

    1981-01-01

    Measurements of compressibilities, moduli, compaction coefficients, porosities, and permeabilities have been conducted on cores from Magma Gulf-Technadril/Department of Energy Amoco Fee No. 1 in the Sweet Lake Field in Cameron Parish, Louisiana. All rock parameters show nonlinear behavior with changing reservoir pressure. Compressibilities and uniaxial compaction coefficients decline rapidly with pore pressure reduction. Porosity reduction was generally less than 10%; permeability reduction was 30 to 40%. Additional tests are in progress.

  18. Mars manned fusion spaceship

    SciTech Connect

    Hedrick, J.; Buchholtz, B.; Ward, P.; Freuh, J.; Jensen, E.

    1991-01-01

    Fusion Propulsion has an enormous potential for space exploration in the near future. In the twenty-first century, a usable and efficient fusion rocket will be developed and in use. Because of the great distance between other planets and Earth, efficient use of time, fuel, and payload is essential. A nuclear spaceship would provide greater fuel efficiency, less travel time, and a larger payload. Extended missions would give more time for research, experiments, and data acquisition. With the extended mission time, a need for an artificial environment exists. The topics of magnetic fusion propulsion, living modules, artificial gravity, mass distribution, space connection, and orbital transfer to Mars are discussed. The propulsion system is a magnetic fusion reactor based on a tandem mirror design. This allows a faster, shorter trip time and a large thrust to weight ratio. The fuel proposed is a mixture of deuterium and helium. Helium can be obtained from lunar mining. There will be minimal external radiation from the reactor resulting in a safe, efficient propulsion system.

  19. Characterization of Nitrogen use efficiency in sweet sorghum

    SciTech Connect

    Dweikat, Ismail; Clemente, Thomas

    2014-09-09

    Sweet sorghum (Sorghum bicolor L. Moench) has the potential to augment the increasing demand for alternative fuels and for the production of input efficient, environmentally friendly bioenergy crops. Nitrogen (N) and water availability are considered two of the major limiting factors in crop growth. Nitrogen fertilization accounts for about 40% of the total production cost in sorghum. In cereals, including sorghum, the nitrogen use efficiency (NUE) from fertilizer is approximately 33% of the amount applied. There is therefore extensive concern in relation to the N that is not used by the plant, which is lost by leaching of nitrate, denitrification from the soil, and loss of ammonia to the atmosphere, all of which can have deleterious environmental effects. To improve the potential of sweet sorghum as a leading and cost effective bioenergy crop, the enhancement of NUE must be addressed. To this end, we have identified a sorghum line (SanChi San) that displays about 25% increase in NUE over other sorghum lines. As such, the overarching goal of this project is to employ three complementary strategies to enhance the ability of sweet sorghum to become an efficient nitrogen user. To achieve the project goal, we will pursue the following specific objectives: Objective 1: Phenotypic characterization of SanChi San/Ck60 RILs under low and moderate N-availability including biochemical profiles, vegetative growth and seed yield Objective 2: Conduct quantitative trait loci (QTL) analysis and marker identification for nitrogen use efficiency (NUE) in a grain sorghum RIL population. Objective 3: Identify novel candidate genes for NUE using proteomic and gene expression profiling comparisons of high- and low-NUE RILs. Candidate genes will be brought into the pipeline for transgenic manipulation of NUE This project will apply the latest genomics resources to discover genes controlling NUE, one of the most complex and economically important traits in cereal crops. As a result of the

  20. Mars Rover's ChemCam Instrument gets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Novel software update fixes autofocus glitch LOS ALAMOS, N.M., May 21, 2015-NASA's Mars ... last week to install the new software on Mars. "We think we will actually have better ...

  1. Science On Tap - Red Wine and Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science On Tap - Red Wine and Mars Science On Tap - Red Wine and Mars WHEN: Jun 18, 2015 5:30 PM - 7:00 PM WHERE: UnQuarked Wine Room 145 Central Park Square, Los Alamos, New...

  2. Mars Rover finds changing rocks, surprising scientists

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Rover finds changing rocks, surprising scientists Mars Rover finds changing rocks, surprising scientists As NASA's Curiosity rover treks up a three-mile-high mountain on Mars, the rocks are changing. Back on Earth, scientists analyzing the data realized this was something different: It turned out to be the first of the high-silica rocks. December 24, 2015 Mars landscape This color-adjusted composite of images taken by NASA's Curiosity rover in September shows the lower portion of Mount

  3. Intercropping of two Leucaena spp. with sweet potato: yield, growth rate and biomass

    SciTech Connect

    Swift, J.F.

    1982-01-01

    Results of trials with Leucaena leucocephala and Leucaena diversifolia at Wau, Papua New Guinea, showed potential benefits of the agroforestry cropping system. The total biomass yield (sweet potato plus firewood and green manure) was considerably greater than the yield per unit area of sweet potato alone. 3 references.

  4. Technology needs for manned Mars missions

    SciTech Connect

    Buden, D. ); Bartine, D. )

    1991-01-01

    As members of the Stafford Synthesis Group, we performed an investigation as to the most expeditious manner to explore Mars. To do this, rationale, objectives, requirements and systems definitions were developed. The objectives include the development of the necessary infrastructure and resources for Mars exploration and performing initial successful exploration of Mars. This will include a transportation system between Mars and Earth, habitats for living on Mars, utilization of Martian resources, and the ability to perform exploration over the entire Martian surface. Using the developed architecture, key technologies were identified. 6 figs., 1 tab.

  5. Curiosity rover zaps Mars for life signs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Curiosity rover zaps Mars for life signs Mars rover depends on three LANL technologies Curiosity zaps Mars for vital signs: Designed by Lab team, ChemCam looks for crucial elements such as carbon, nitrogen and oxygen. July 30, 2012 Curiosity rover zapping rocks on Mars Power up! The third part of the "LANL Visits Mars" trio is an essential component of the heat-producing Multi-Mission Radioisotope Thermoelectric Generator unit. It powers the rover and keeps the instruments from

  6. Mars mission laser tool heads to JPL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars mission laser tool Mars mission laser tool heads to JPL Curiosity will carry the newly delivered laser instrument to reveal which elements are present in Mars' rocks and soils. September 21, 2010 A bright ball of plasma is produced by ChemCam's invisible laser beam striking a rock within the Mars sample chamber. A bright ball of plasma is produced by ChemCam's invisible laser beam striking a rock within the Mars sample chamber. Contact Nancy Ambrosiano Communications Office (505) 667-0471

  7. SCALING LAW OF RELATIVISTIC SWEET-PARKER-TYPE MAGNETIC RECONNECTION

    SciTech Connect

    Takahashi, Hiroyuki R.; Kudoh, Takahiro; Masada, Youhei; Matsumoto, Jin

    2011-10-01

    Relativistic Sweet-Parker-type magnetic reconnection is investigated by relativistic resistive magnetohydrodynamic (RRMHD) simulations. As an initial setting, we assume anti-parallel magnetic fields and a spatially uniform resistivity. A perturbation imposed on the magnetic fields triggers magnetic reconnection around a current sheet, and the plasma inflows into the reconnection region. The inflows are then heated due to ohmic dissipation in the diffusion region and finally become relativistically hot outflows. The outflows are not accelerated to ultrarelativistic speeds (i.e., Lorentz factor {approx_equal} 1), even when the magnetic energy dominates the thermal and rest mass energies in the inflow region. Most of the magnetic energy in the inflow region is converted into the thermal energy of the outflow during the reconnection process. The energy conversion from magnetic to thermal energy in the diffusion region results in an increase in the plasma inertia. This prevents the outflows from being accelerated to ultrarelativistic speeds. We find that the reconnection rate R obeys the scaling relation R{approx_equal}S{sup -0.5}, where S is the Lundquist number. This feature is the same as that of non-relativistic reconnection. Our results are consistent with the theoretical predictions of Lyubarsky for Sweet-Parker-type magnetic reconnection.

  8. Crystal structure of the sweet-tasting protein thaumatin II at 1.27 A

    SciTech Connect

    Masuda, Tetsuya; Ohta, Keisuke; Tani, Fumito; Mikami, Bunzo; Kitabatake, Naofumi

    2011-07-08

    Highlights: {yields} X-ray crystallographic structure of sweet-tasting protein, thaumatin II, was determined at a resolution of 1.27 A. {yields} The overall structure of thaumatin II is similar to that of thaumatin I, but a slight shift of the C{alpha} atom of G96 in thaumatin II was observed. {yields} The side chain of two critical residues, 67 and 82, for sweetness was modeled in two alternative conformations. {yields} The flexibility and fluctuation of side chains at 67 and 82 seems to be suitable for interaction of thaumatin molecules with sweet receptors. -- Abstract: Thaumatin, an intensely sweet-tasting protein, elicits a sweet taste sensation at 50 nM. Here the X-ray crystallographic structure of one of its variants, thaumatin II, was determined at a resolution of 1.27 A. Overall structure of thaumatin II is similar to thaumatin I, but a slight shift of the C{alpha} atom of G96 in thaumatin II was observed. Furthermore, the side chain of residue 67 in thaumatin II is highly disordered. Since residue 67 is one of two residues critical to the sweetness of thaumatin, the present results suggested that the critical positive charges at positions 67 and 82 are disordered and the flexibility and fluctuation of these side chains would be suitable for interaction of thaumatin molecules with sweet receptors.

  9. Sep Nov Jan Mar May Jul Sep Nov Jan Mar May Jul Sep Nov Jan

    Office of Legacy Management (LM)

    Nov Jan Mar May Jul Sep Nov Jan Mar May Jul Sep Nov Jan 2008 2009 2010 Mound Site Transition Created with Timeline Maker Professional on May 06 2008 Sep 2008 Phase I Parcel Deed...

  10. Nuclear technologies for Moon and Mars exploration

    SciTech Connect

    Buden, D.

    1991-01-01

    Nuclear technologies are essential to successful Moon and Mars exploration and settlements. Applications can take the form of nuclear propulsion for transport of crews and cargo to Mars and the Moon; surface power for habitats and base power; power for human spacecraft to Mars; shielding and life science understanding for protection against natural solar and cosmic radiations; radioisotopes for sterilization, medicine, testing, and power; and resources for the benefits of Earth. 5 refs., 9 figs., 3 tabs.

  11. Mars Curiosity rover talks in May

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Curiosity rover talks in May Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit Mars Curiosity rover talks in May Talks scheduled for Albuquerque, Santa Fe, Los Alamos and Taos. April 1, 2013 Roger Wiens with Curiosity rover Roger Wiens poses with the rover Curiosity. Contact Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email "Exploring Mars with

  12. 2010 MARS Refresher Presentation (3 of 3)

    ScienceCinema

    None

    2016-07-12

    Information sessions that shall outline the general principles of the 2010 annual Merit, Appraisal and Recognition Scheme (MARS). Presentation will be given in English.

  13. 2011 MARS Refresher Presentation (2 of 3)

    ScienceCinema

    None

    2016-07-12

    Information sessions that shall outline the general principles of the 2011 annual Merit, Appraisal and Recognition Scheme (MARS). Presentation will be given in English.

  14. Calloway Makes Sweet 16, Lone Oak Competes in DOE National Science Bowl |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Calloway Makes Sweet 16, Lone Oak Competes in DOE National Science Bowl Calloway Makes Sweet 16, Lone Oak Competes in DOE National Science Bowl April 29, 2014 - 2:43pm Addthis Calloway County High School's Mia Beth Morehead, coach, Landon Fike, Cody Bergman, Sam Morehead, Josh Betts, and Hudson Elliott from Murray, Kentucky, pose for a team photo during the 2014 National Science Bowl competition, Thursday, April 24, 2014, in Washington, DC. Calloway County High School's

  15. Rover on Mars now picks its own laser targets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rover on Mars now picks its own laser targets Rover on Mars now picks its own laser targets If you find yourself on Mars anytime soon, beware: there's a rover exploring its ...

  16. Mars Rover's ChemCam Instrument gets sharper vision

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Rover's ChemCam Instrument gets sharper vision Mars Rover's ChemCam Instrument gets sharper vision NASA's Mars Curiosity Rover's "ChemCam" instrument just got a major ...

  17. Commercial Lighting

    Energy.gov [DOE]

    Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

  18. NASA agreements advance Mars exploration, Los Alamos Rover instrument...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NASA agreements advance Mars exploration NASA agreements advance Mars exploration, Los Alamos Rover instrument a key component Los Alamos National Laboratory is coordinating with ...

  19. Keck Institute for Space Studies "Addressing the MARS ISRU Challenge...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Keck Institute for Space Studies "Addressing the MARS ISRU Challenge" Workshop Keck Institute for Space Studies "Addressing the MARS ISRU Challenge" Workshop Tue, Jun 28, 2016 ...

  20. Nuclear Risk Assessment for the Mars 2020 Mission Environmental...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Nuclear Risk Assessment for the Mars 2020 Mission Environmental Impact Statement Citation Details In-Document Search Title: Nuclear Risk Assessment for the Mars ...

  1. Analysis of Sweet Lake geopressured-geothermal aquifer

    SciTech Connect

    Andrade, M.; Rago, F.M.; Ohkuma, H.; Sepehrnoori, K.; Peters, E.; Dorfman, M.

    1983-01-01

    The Sweet Lake geopressured-geothermal aquifer, located southeast of Lake Charles, Louisiana, is an aquifer modeled by a two-dimensional geopressured-geothermal simulator. This aquifer is a sandstone within the Frio formation at depths between 15,000 to 15,640 ft with a net porous thickness of 250 ft, a calculated in-situ permeability (from drawdown data) of 17 md, an estimated porosity of 24 percent, a uniaxial compaction coefficient of 4.5 x 10/sup -7/ psi/sup -1/ and a solution gas-water ratio of 11 SCF/STB all at the initial reservoir pressure of 12,060 psi. These parameters are typically pressure sensitive in geopressured-geothermal aquifers and are critically important to aquifer performance. Several simulation experiments are conducted which investigate the effects of varying initial values for these parameters with the experimentally determined values as means. The simulations give both optimistic and pessimistic expectations for aquifer performance. The expected life of the geopressured-geothermal well is reported for each simulation.

  2. Analysis of Sweet Lake geopressured-geothermal aquifer

    SciTech Connect

    Andrade, M.; Rago, F.; Ohkuma, H.; Sepehrnoori, K.; Peters, E.; Dorfman, M.

    1982-01-01

    The Sweet Lake geopressured-geothermal aquifer, located southeast of Lake Charles, Louisiana, is modeled by a two-dimensional geopressured-geothermal simulator. This aquifer is a sandstone within the Frio formation at depths between 15,000 to 15,640 ft with a net porous thickness of 250 ft, a calculated in-situ permeability (from drawdown data) of 17 md, an estimated porosity of 24%, a uniaxial compaction coefficient of 4.5 x 10/sup -7/ psi/sup -1/ and a solution gas-water ratio of 11 SCF/STB all at the initial reservoir pressure of 12,060 psi. These parameters are typically pressure sensitive in geopressured-geothermal aquifers and are critically important to aquifer performance. Several simulation experiments are conducted which investigate the effects of varying initial values for these parameters with the experimentally determined values as means. The simulations give both optimistic and pessimistic expectations for aquifer performance. The expected life of the geopressured-geothermal well is reported for each simulation.

  3. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    SciTech Connect

    Mohammad S. Roni; Kara G. Cafferty; Christopher T Wright; Lantian Ren

    2015-06-01

    China has abundant biomass resources, which can be used as a potential source of bioenergy. However, China faces challenges implementing biomass as an energy source, because China has not developed the highly networked, high-volume biomass logistics systems and infrastructure. This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to the U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum under different scenarios in China. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study shows that the logistics cost of corn stover and sweet sorghum stalk will be $52.95/dry metric ton and $52.64/ dry metric ton, respectively, for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk will be down to $36.01/ dry metric ton and $35.76/dry metric ton, respectively. The study also performed a sensitivity analysis to find the cost factors that cause logistics cost variation. A sensitivity analysis shows that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, causing a variation of $6 to $12/metric ton.

  4. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    SciTech Connect

    Ren, Lantian; Cafferty, Kara; Roni, Mohammad; Jacobson, Jacob; Xie, Guanghui; Ovard, Leslie; Wright, Christopher

    2015-06-11

    This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively, for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.

  5. Analyzing and Comparing Biomass Feedstock Supply Systems in China: Corn Stover and Sweet Sorghum Case Studies

    DOE PAGES [OSTI]

    Ren, Lantian; Cafferty, Kara; Roni, Mohammad; Jacobson, Jacob; Xie, Guanghui; Ovard, Leslie; Wright, Christopher

    2015-06-11

    This paper analyzes the rural Chinese biomass supply system and models supply chain operations according to U.S. concepts of logistical unit operations: harvest and collection, storage, transportation, preprocessing, and handling and queuing. In this paper, we quantify the logistics cost of corn stover and sweet sorghum in China under different scenarios. We analyze three scenarios of corn stover logistics from northeast China and three scenarios of sweet sorghum stalks logistics from Inner Mongolia in China. The case study estimates that the logistics cost of corn stover and sweet sorghum stalk to be $52.95/dry metric ton and $52.64/dry metric ton, respectively,more » for the current labor-based biomass logistics system. However, if the feedstock logistics operation is mechanized, the cost of corn stover and sweet sorghum stalk decreases to $36.01/dry metric ton and $35.76/dry metric ton, respectively. The study also includes a sensitivity analysis to identify the cost factors that cause logistics cost variation. Results of the sensitivity analysis show that labor price has the most influence on the logistics cost of corn stover and sweet sorghum stalk, with a variation of $6 to $12/dry metric ton.« less

  6. Los Alamos laser selected for 2020 Mars mission

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos laser selected for 2020 Mars mission Los Alamos laser selected for 2020 Mars mission SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission. December 22, 2014 SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission. SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission Contact

  7. Los Alamos laser selected for 2020 Mars mission

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos laser selected for 2020 Mars mission Los Alamos laser selected for 2020 Mars mission SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission. July 31, 2014 An artist's rendering of the SuperCam instrument aboard the next generation Mars rover scheduled to visit the Red Planet in 2020. An artist's rendering of the SuperCam instrument aboard the next generation Mars rover scheduled to visit the Red Planet in 2020.

  8. The Mission of the Mars Exploration Rovers

    ScienceCinema

    Grant, John [Smithsonian Institution, Washington, D.C., United States

    2016-07-12

    The Mars Exploration Rover mission was expected to last 3 months, but has continued for more than 4 years. The major science results from both rovers will be summarized.

  9. Curiosity Mars Rover's ChemCam

    Energy.gov [DOE]

    To carry out its mission, the Curiosity Mars rover relies on the most advanced suite of instruments ever sent to the Martian surface –- among them, a laser-firing tool called the ChemCam.

  10. Light Source

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    a Light Source Data and Analysis Framework at NERSC Jack Deslippe, Shane Canon, Eli Dart, Abdelilah Essiari, Alexander Hexemer, Dula Parkinson, Simon Patton, Craig Tull + Many More The ALS Data Needs September 21, 2010 - NIST (MD) Light source data volumes are growing many times faster than Moore's law. ● Light source luminosity ● Detector resolution & rep-rates ● Sample automation BES user facilities serve 10,000 scientists and engineers every year. Mostly composed of many small

  11. Residential Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    & Events Expand News & Events Skip navigation links Residential Residential Lighting Energy Star Appliances Consumer Electronics Heat Pump Water Heaters Electric Storage Water...

  12. Cerenkov Light

    SciTech Connect

    Slifer, Karl

    2013-06-13

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  13. Lighting Renovations

    Energy.gov [DOE]

    When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

  14. Cerenkov Light

    ScienceCinema

    Slifer, Karl

    2014-05-22

    The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

  15. Innovative Methodology For Detection of Fracture-Controlled Sweet Spots in the Northern Appalachian Basin

    SciTech Connect

    Jacobi, Rober

    2007-03-28

    This Topical Report (#6 of 9) consists of the figures 3.6-13 to (and including) 3.6-18 (and appropriate figure captions) that accompany the Final Technical Progress Report entitled: “Innovative Methodology for Detection of Fracture-Controlled Sweet Spots in the Northern Appalachian Basin” for DOE/NETL Award DE-AC26-00NT40698.

  16. Innovative Methodology for Detection of Fracture-Controlled Sweet Spots in the Northern Appalachian Basin

    SciTech Connect

    Jacobi, Rober

    2007-03-31

    This Topical Report (#6 of 9) consists of the figures 3.6-13 to (and including) 3.6-18 (and appropriate figure captions) that accompany the Final Technical Progress Report entitled: "Fracture-Controlled Sweet Spots in the Northern Appalachian Basin” for DOE/NETL Award DE-AC26-00NT40698.

  17. The Science Behind "The Martian" -- Staying Warm on Mars | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Science Behind "The Martian" -- Staying Warm on Mars The Science Behind "The Martian" -- Staying Warm on Mars March 22, 2016 - 1:40pm Addthis Jenny Woodbery Oak Ridge National ...

  18. Curiosity rover finds evidence of Mars' primitive continental...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    This is the first discovery of a potential "continental crust" on Mars. July 13, 2015 Igneous clast named Harrison embedded in a conglomerate rock in Gale crater, Mars, shows ...

  19. Mars Hill (2007) Wind Farm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    7) Wind Farm Jump to: navigation, search Name Mars Hill (2007) Wind Farm Facility Mars Hill (2007) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service...

  20. Earth plus Mars: Los Alamos National Lab partners with Spain...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Earth plus Mars: Los Alamos National Lab partners with Spain and France Earth plus Mars: Los Alamos National Lab partners with Spain and France New Mexico's role in the next...

  1. Los Alamos laser selected for 2020 Mars mission

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos laser selected for 2020 Mars mission Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Los Alamos laser selected for 2020 Mars mission SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission September 2, 2014 An artist's rendering of the SuperCam instrument aboard the next generation Mars rover scheduled to visit the Red Planet in 2020 An

  2. Mars Rover's ChemCam Instrument gets sharper vision

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Rover's ChemCam Instrument gets sharper vision Mars Rover's ChemCam Instrument gets sharper vision NASA's Mars Curiosity Rover's "ChemCam" instrument just got a major capability fix, as Los Alamos National Laboratory scientists uploaded a software repair for the auto-focus system on the instrument. May 21, 2015 SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity Rover during NASA's current Mars Mission. Yellowjacket is the first rock targeted by

  3. Science On Tap - Red Wine and Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science On Tap - Red Wine and Mars Science On Tap - Red Wine and Mars WHEN: Jun 18, 2015 5:30 PM - 7:00 PM WHERE: UnQuarked Wine Room 145 Central Park Square, Los Alamos, New Mexico 87544, USA SPEAKER: Nina Lanza, Geochemist and Planetary Scientist CONTACT: Jessica Privette 505 667-0375 CATEGORY: Bradbury INTERNAL: Calendar Login Science on Tap series Event Description Science On Tap happens every third Thursday of the month, featuring a new topic each week. It begins with an informal 15-minute

  4. Commercial Lighting and LED Lighting Incentives | Department...

    Energy.gov [DOE] (indexed site)

    Schools Institutional Savings Category Lighting Lighting ControlsSensors Other EE LED Lighting Maximum Rebate Up to 100% of cost; incentives that exceed 5,000 should be...

  5. Manned Mars missions using propellant from space

    SciTech Connect

    Zuppero, A.C.; Olson, T.S. ); Redd, L.R. )

    1993-01-10

    .A recent discovery (8/14/92) of a near-earth object containing materials potentially useful for space activities could perhaps change the entire way humans access and operate in space. A near-Earth object ([number sign]4015, 1979 VA, comet Wilson-Harrington) contains water ice that could be used for space propulsion. In addition, this type of object may contain structural and lifesustaining materials (complex hydrocarbons, ammonia and/or bound nitrogen compounds) for space structures, manned planetary bases, or planetary surface terraforming. The retrieval and utilization of rocket propellant from near-Earth objects, for manned Mars missions in particular, has been investigated and the benefits of this scenario to over performing a Mars mission with terrestrial propellants have been documented. The results show water extracted from these objects and retrieved to Earth orbit for use in going to Mars may actually enable manned Mars exploration by reducing the number of Heavy Lift Launch Vehicle (HLLV) flights or eliminating the need for HLLV's altogether. The mission can perhaps be supported with existing launch vehicles and not required heavy lift capability. Also, the development of a nuclear thermal rocket for this alternate approach may be simplified substantially by reducing the operating temperature required.

  6. A Nuclear Powered ISRU Mission to Mars

    SciTech Connect

    Finzi, Elvina; Davighi, Andrea; Finzi, Amalia

    2006-01-20

    Space exploration has always been drastically constrained by the masses that can be launched into orbit; Hence affordable planning and execution of prolonged manned space missions depend upon the utilization of local. Successful in-situ resources utilization (ISRU) is a key element to allow the human presence on Mars or the Moon. In fact a Mars ISRU mission is planned in the Aurora Program, the European program for the exploration of the solar system. Orpheus mission is a technological demonstrator whose purpose is to show the advantages of an In Situ Propellant Production (ISPP). Main task of this work is to demonstrate the feasibility of a nuclear ISPP plant. The mission designed has been sized to launch back form Mars an eventual manned module. The ISPP mission requires two different: the ISPP power plant module and the nuclear reactor module. Both modules reach the escape orbit thanks to the launcher upper stage, after a 200 days cruising phase the Martian atmosphere is reached thanks to small DV propelled manoeuvres, aerobreaking and soft landing. During its operational life the ISPP plant produces. The propellant is produced in one synodic year. 35000 kg of Ethylene are produced at the Martian equator. The resulting systems appear feasible and of a size comparable to other ISRU mission designs. This mission seems challenging not only for the ISPP technology to be demonstrated, but also for the space nuclear reactor considered; Though this seems the only way to allow a permanent human presence on Mars surface.

  7. Curiosity rover finds weird 'egg rock' meteorite on Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Curiosity rover finds weird 'egg rock' meteorite on Mars Curiosity rover finds weird 'egg rock' meteorite on Mars NASA's Mars rover Curiosity stumbled upon a dark grey, golf-ball-size object last week that looks nothing like the typical red-orange rocks that are normally seen on Mars. November 7, 2016 Copperhead Snake on Dead Leaves, watercolor by Abbott Handerson Thayer (1849-1921) This dark, lumpy, golf ball-size object is an iron-nickel meteorite. NASA's Curiosity rover discovered it on Mars

  8. Rover on Mars now picks its own laser targets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rover on Mars now picks its own laser targets Rover on Mars now picks its own laser targets If you find yourself on Mars anytime soon, beware: there's a rover exploring its surface, and it now has the ability to choose its own targets for its onboard laser-and even fire it autonomously. August 1, 2016 Rover on Mars now picks its own laser targets This selfie of NASA's Curiosity Mars rover shows the vehicle at a drilled sample site called "Okoruso," on the "Naukluft Plateau"

  9. Planetary scientist to discuss Curiosity rover's visit to Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Scientist to discuss Curiosity rover's visit to Mars Planetary scientist to discuss Curiosity rover's visit to Mars Agnes Cousin-Pilleri will discuss the trailblazing discoveries made by the ChemCam instrument on the Curiosity rover on Mars on May 28. May 23, 2014 Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks for elements such as carbon, nitrogen, and oxygen, all of which are crucial for life. Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks

  10. Light's Darkness

    ScienceCinema

    Padgett, Miles [University of Glasgow, Glasgow, Scotland

    2016-07-12

    Optical vortices and orbital angular momentum are currently topical subjects in the optics literature. Although seemingly esoteric, they are, in fact, the generic state of light and arise whenever three or more plane waves interfere. To be observed by eye the light must be monochromatic. Laser speckle is one such example, where the optical energy circulates around each black spot, giving a local orbital angular momentum. This talk with report three on-going studies. First, when considering a volume of interfering waves, the laser specs map out threads of complete darkness embedded in the light. Do these threads form loops? Links? Or even knots? Second, when looking through a rapidly spinning window, the image of the world on the other side is rotated: true or false? Finally, the entanglement of orbital angular momentum states means measuring how the angular position of one photons sets the angular momentum of another: is this an angular version of the EPR (Einstein, Podolsky, and Rosen) paradox?

  11. National Lighting Energy Consumption

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Energy National Lighting Energy Consumption Consumption 390 Billion kWh used for lighting in all 390 Billion kWh used for lighting in all commercial buildings in commercial buildings in 2001 2001 LED (<.1% ) Incandescent 40% HID 22% Fluorescent 38% Lighting Energy Consumption by Lighting Energy Consumption by Breakdown of Lighting Energy Breakdown of Lighting Energy Major Sector and Light Source Type Major Sector and Light Source Type Source: Navigant Consulting, Inc., U.S. Lighting

  12. Light Show

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9 Lightning - Nature's Light Show Lightning provides one of nature's most spectacular displays of energy. Though fascinating to observe, lightning can be dangerous and deadly. Protecting ARM instruments from lightning damage is vital. Putting equipment worth millions of dollars into open fields (Photo: NOAA) ARM Facilities Newsletter is published by Argonne National Laboratory, a multiprogram laboratory operated by The University of Chicago under contract W-31-109-Eng-38 with the U.S. Department

  13. Roaming Mars and Space: 3D Technology Exploration from Home | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Roaming Mars and Space: 3D Technology Exploration from Home Roaming Mars and Space: 3D Technology Exploration from Home November 5, 2013 - 11:55am Addthis Explore Mars and the solar system at <a href="http://www.mars.webmaker.org">mars.webmaker.org</a>. | Courtesy of mars.webmaker.org. Explore Mars and the solar system at mars.webmaker.org. | Courtesy of mars.webmaker.org. Linda Silverman Director, Solar Decathlon Erin Twamley Project and Web Manager, Education

  14. Mars in this century: The Olympia Project

    SciTech Connect

    Hyde, R.A.; Ishikawa, M.Y.; Wood, L.L.

    1988-01-01

    Manned exploration of the inner solar system --- typified by a manned expedition to Mars --- this side of the indefinite future involves fitting a technical peg into the political hole. If Apollo-level resources are assumed unavailable for such exploratory programs, then non-Apollo means and methods must be employed, involving greater technical and human risks, or else such exploration must be deferred indefinitely. Sketched here is an example of such a relatively high-risk alternative, one which could land men on Mars in the next decade, and return them to earth. Two of its key features are a teleoperated rocket fuel-generating facility on the lunar surface and an interplanetary mission-staging space station at L{sub 4}, which would serve to enable a continuing solar system exploratory program, with annual mission commencements to points as distant as the Jovian moons. The estimated cost-to-execute this infrastructure-building manned Mars mission is $3 billion, with follow-on missions estimated to cost no more than $1 billion each. 3 figs., 2 tabs.

  15. Requirements and Designs for Mars Rover RTGs

    SciTech Connect

    Schock, Alfred; Shirbacheh, M; Sankarankandath, V

    2012-01-19

    The current-generation RTGs (both GPHS and MOD) are designed for operation in a vacuum environment. The multifoil thermal insulation used in those RTGs only functions well in a good vacuum. Current RTGs are designed to operate with an inert cover gas before launch, and to be vented to space vacuum after launch. Both RTGs are sealed with a large number of metallic C-rings. Those seals are adequate for retaining the inert-gas overpressure during short-term launch operations, but would not be adequate to prevent intrusion of the Martian atmospheric gases during long-term operations there. Therefore, for the Mars Rover application, those RTGs just be modified to prevent the buildup of significant pressures of Mars atmosphere or of helium (from alpha decay of the fuel). In addition, a Mars Rover RTG needs to withstand a long-term dynamic environment that is much more severe than that seen by an RTG on an orbiting spacecraft or on a stationary planetary lander. This paper describes a typical Rover mission, its requirements, the environment it imposes on the RTG, and a design approach for making the RTG operable in such an environment. Specific RTG designs for various thermoelectric element alternatives are presented.; Reference CID #9268 and CID #9276.

  16. Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Lighting When you're shopping for lightbulbs, compare lumens and use the Lighting Facts label to be sure you're getting the amount of light, or level of brightness, you want. You can save money and energy while lighting your home and still maintaining good light quantity and quality. Consider energy-efficient lighting options to use the same amount of light for less money. Learn strategies for comparing and buying lighting products and using them efficiently. Featured Lighting Choices

  17. Mars Rover's ChemCam Instrument gets sharper vision

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars Rover's ChemCam Instrument gets sharper vision Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Mars Rover's ChemCam Instrument gets sharper vision NASA's Mars Curiosity Rover's "ChemCam" instrument just got a major capability fix, as Los Alamos National Laboratory scientists uploaded a software repair for the auto-focus system on the instrument. July 1, 2015 Yellowjacket is the first rock targeted by

  18. Nuclear Systems Powering a Mission to Mars | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems Powering a Mission to Mars Nuclear Systems Powering a Mission to Mars November 28, 2011 - 11:23am Addthis Radioisotope Power Systems, a strong partnership between the Energy Department's Office of Nuclear Energy and NASA, has been providing the energy for deep space exploration. Assistant Secretary Lyons Assistant Secretary Lyons Assistant Secretary for Nuclear Energy Curiosity Mission: investigate whether the Gale Crater on Mars has ever offered environmental conditions that support the

  19. Del Mar, California: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Mar, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 32.9594891, -117.2653146 Show Map Loading map... "minzoom":false,"mappingservi...

  20. Boca Del Mar, Florida: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Del Mar, Florida: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 26.345078, -80.1467115 Show Map Loading map... "minzoom":false,"mappingservic...

  1. Bow Mar, Colorado: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Bow Mar, Colorado: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.628321, -105.0499841 Show Map Loading map... "minzoom":false,"mappingserv...

  2. Reading Municipal Light Department - Business Lighting Rebate...

    Energy.gov [DOE] (indexed site)

    with Electronic Ballasts: 100fixture De-lamping: 4 - 9lamp Lighting Sensors: 20sensor LED Exit Signs: 20fixture Summary Reading Municipal Light Department (RMLD) offers...

  3. light-emitting diode

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Cost The high-brightness, rapidly pulsed, multicolor light-emitting diode (LED) driver delivers lighting performance that exceeds that of conventional (laserarc-light) sources ...

  4. Distinct Contributions of T1R2 and T1R3 Taste Receptor Subunits to the Detection of Sweet Stimuli

    SciTech Connect

    Nie,Y.; Vigues, S.; Hobbs, J.; Conn, G.; Munger, S.

    2005-01-01

    The molecular mechanisms by which G protein-coupled receptor (GPCR)-type chemosensory receptors of animals selectively interact with their cognate ligands remain poorly understood. There is growing evidence that many chemosensory receptors exist in multimeric complexes, though little is known about the relative contributions of individual subunits to receptor functions. This study showed that each of the two subunits in the mammalian heteromeric T1R2:T1R3 sweet taste receptor binds sweet stimuli, though with distinct affinities and conformational changes. Furthermore, ligand affinities for T1R3 are drastically reduced by the introduction of a single amino acid change associated with decreased sweet taste sensitivity in mice. Thus, individual T1R subunits increase the receptive range of the sweet taste receptor, offering a functional mechanism for phenotypic variations in sweet taste.

  5. The ChemCam instrument for the 2011 Mars science laboratory mission...

    Office of Scientific and Technical Information (OSTI)

    for the 2011 Mars science laboratory mission: system requirements and performance Citation Details In-Document Search Title: The ChemCam instrument for the 2011 Mars science ...

  6. Nuclear propulsion system options for Mars missions

    SciTech Connect

    Emrich, W.J. Jr.; Young, A.C. )

    1992-03-01

    This paper focuses on the use of a nuclear thermal rocket to accomplish a variety of space missions with emphasis on the manned Mars mission. The particle-bed-reactor type nuclear engine was chosen as the baseline engine because of its perceived versatility over other nuclear propulsion systems in conducting a wide variety of tasks. This study indicates that the particle-bed-reactor engine with its high engine thrust-to-weight ratio (about 20) and high specific impulse (about 950 to 1050 sec) offers distinct advantages over the larger and heavier NERVA-type nuclear engines.

  7. Nuclear propulsion tradeoffs for manned Mars missions

    SciTech Connect

    Walton, L.A.; Malloy, J.D. )

    1991-01-05

    A conjunction class split/sprint manned Mars exploration mission was studied to evaluate tradeoffs in performance characteristics of nuclear thermal rockets. A Particle Bed Reactor-based nuclear thermal rocket was found to offer a 38% to 52% total mass savings compared with a NERVA-based nuclear thermal rocket for this mission. This advantage is primarily due to the higher thrust-to-weight ratio of the Particle Bed Reactor nuclear rocket. The mission is enabled by nuclear thermal rockets. It cannot be performed practically using chemical propulsion.

  8. Mars Rover's ChemCam Instrument gets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Rover's ChemCam Instrument gets sharper vision May 21, 2015 Novel software update fixes autofocus glitch LOS ALAMOS, N.M., May 21, 2015-NASA's Mars Curiosity Rover's "ChemCam" instrument just got a major capability fix, as Los Alamos National Laboratory scientists uploaded a software repair for the auto-focus system on the instrument. "Last November we discovered that a small laser used to focus the ChemCam telescope on its targets had failed" said Roger Wiens, instrument

  9. Real-time graphic displays in Mars. [AVLIS process

    SciTech Connect

    Treadway, T.

    1985-12-01

    Real-time diagnostic data of the AVLIS process is displayed in the form of a two-dimensional plot on selected monitors in the Mars Control Room. Each Mars workstation contains a HP2622 terminal for computer interface to the experiment and a Raster Technologies graphic controller driving a Conrac high resolution color monitor for graphics output.

  10. Small_Business_Memo_Mar2010.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Small_Business_Memo_Mar2010.pdf Small_Business_Memo_Mar2010.pdf (257.52 KB) More Documents & Publications Small Businesses Helping Drive Economy: Clean Energy, Clean Sites Federal Incentives for Wind Power Deployment Remarks by David Sandalow, Assistant Secretary of Energy for Policy and International Affairs, to the Center for Strategic and International Studies

  11. Variation in Biomass Composition Components among Forage, Biomass, Sorghum-Sudangrass, and Sweet Sorghum Types

    SciTech Connect

    Stefaniak, T. R.; Dahlberg, J. A.; Bean, B. W.; Dighe, N.; Wolfrum, E. J.; Rooney, W. L.

    2012-07-01

    Alternative biomass sources must be developed if the United States is to meet the goal in the U.S. Energy Security Act of 2007 to derive 30% of its petroleum from renewable sources, and several different biomass crops are currently in development. Sorghum [Sorghum bicolor (L.) Moench] is one such crop that will be an important feedstock source for biofuel production. As composition influences productivity, there exists a need to understand the range in composition observed within the crop. The goal of this research was to assess the range in dietary fiber composition observed within different types of biomass sorghums. A total of 152 sorghum samples were divided into the four end-use types of sorghum: biomass, forage, sorghum-sudangrass, and sweet. These samples were analyzed chemically using dietary fiber analysis performed at the National Renewable Energy Laboratory using published protocols. Significant variation among the groups was detected for glucan and ash. Positive and highly significant correlations were detected between structural carbohydrates in the biomass and sweet sorghums while many of these correlations were negative or not significant in the forage and sorghum-sudangrass types. In addition, a wide range of variation was present within each group indicating that there is potential to manipulate the composition of the crop.

  12. MarFS-Requirements-Design-Configuration-Admin

    SciTech Connect

    Kettering, Brett Michael; Grider, Gary Alan

    2015-07-08

    This document will be organized into sections that are defined by the requirements for a file system that presents a near-POSIX (Portable Operating System Interface) interface to the user, but whose data is stored in whatever form is most efficient for the type of data being stored. After defining the requirement the design for meeting the requirement will be explained. Finally there will be sections on configuring and administering this file system. More and more, data dominates the computing world. There is a “sea” of data out there in many different formats that needs to be managed and used. “Mar” means “sea” in Spanish. Thus, this product is dubbed MarFS, a file system for a sea of data.

  13. Low thrust NTP for manned Mars operations

    SciTech Connect

    Olsen, T.; Madsen, W. ); Redd, L. )

    1993-01-10

    The impact on manned Mars operations of selecting a nuclear thermal propulsion (NTP) module with a relatively low total thrust, in the 222--445 kN (50--100 klbf) range, is explored. The propulsion module may consist of one or more engines. Selection of a low total thrust is robust across a wide range of payload masses provided perigee kicks are utilized for trans-Mars insertion (TMI). The longer time taken for TMI when using a low total thrust and perigee kicks allows for extensive system evaluation before commitment to Earth escape, but will require fuels with lifetimes of at least a few hours. Longer fuel life could be obtained without using advanced fuels by operating at lower fuel temperatures later in the mission. The additional traversals through the Van Allen belts inherent with using perigee kicks for TMI does not significantly increase the radiation exposure of the crew. Negative reactivity from xenon buildup between perigee kicks can be mitigated by coasting on the intermediate orbits, by altering the selection of the intermediate orbits, by deep throttling, or by building in sufficient excess reactivity. Thrust misalignments of a realistic magnitude do not pose an Earth impact hazard. Engine crosstalk in clusters is a very manageable problem. High propulsion module reliability can be achieved with a propulsion module consisting of a cluster of three or four small engines without dropping the module thrust-to-weight ratio below an acceptable level. A total design thrust in the 222--445 kN range is high enough for Earth return with only one of the engines of the cluster operating.

  14. ChemCam is having a blast on Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ChemCam Is Having A Blast On Mars Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit ChemCam is having a blast on Mars Following the successful landing of the Mars rover Curiosity on August 5, Lab scientists and their French counterparts have already begun firing its onboard laser and collecting data. September 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email

  15. Energy Department Nuclear Systems Are Powering Mars Rover | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Nuclear Systems Are Powering Mars Rover Energy Department Nuclear Systems Are Powering Mars Rover November 28, 2011 - 12:14pm Addthis Washington, D.C. - The Mars Science Laboratory rover, which launched from Cape Canaveral this weekend, is powered by nuclear systems developed by the U.S. Department of Energy (DOE), marking the 28th space mission supported by nuclear energy. This year also marks the 50th anniversary of nuclear-powered space exploration. To commemorate the launch, DOE

  16. Mars rover's laser can now target rocks all by itself

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mars rover's laser can now target rocks all by itself Mars rover's laser can now target rocks all by itself New software is enabling ChemCam to select rock targets autonomously-the first time autonomous target selection is available for an instrument of this kind on any robotic planetary mission. July 21, 2016 NASA's Curiosity Mars rover autonomously selects some targets for the laser and telescopic camera of its ChemCam instrument. For example, on-board software analyzed the Navcam image at

  17. Mobile lighting apparatus

    DOEpatents

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  18. Prospects for LED lighting.

    SciTech Connect

    Tsao, Jeffrey Yeenien; Gee, James Martin; Simmons, Jerry Alvon

    2003-08-01

    Solid-state lighting using light-emitting diodes (LEDs) has the potential to reduce energy consumption for lighting by 50% while revolutionizing the way we illuminate our homes, work places, and public spaces. Nevertheless, substantial technical challenges remain in order for solid-state lighting to significantly displace the well-developed conventional lighting technologies. We review the potential of LED solid-state lighting to meet the long-term cost goals.

  19. Models and Results Database (MAR-D), Version 4. 0

    SciTech Connect

    Branham-Haar, K.A.; Dinneen, R.A.; Russell, K.D.; Skinner, N.L. )

    1992-05-01

    The Nuclear Regulatory Commission's Office of Nuclear Regulatory Research (NRC-RES) is presently funding the development of the Models and Results Database (MAR-D) at the Idaho National Engineering Laboratory. MAR-D's primary function is to create a data repository for NUREG-1150 and other permanent data by providing input, conversion, and output capabilities for data used by IRRAS, SARA, SETS, and FRANTIC personal computer (PC) codes. As probabilistic risk assessments and individual plant examinations are submitted to the NRC for review, MAR-D can be used to convert the models and results from the study for use with IRRAS and SARA. Then, these data can be easily accessed by future studies and will be in a form that will enhance the analysis process. This reference manual provides an overview of the function available within MAR-D and step-by-step operating instructions.

  20. MHK Technologies/PSE MAR | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Strategic Marine Energy Project PSE MAR is co funded by the Ministry of Education and Science and aims to position Spain as a world leader in the marine energy sector Technology...

  1. Lighting Developments to 2030

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ... Twitter Google + Vimeo Newsletter Signup SlideShare Lighting Developments to 2030 Home...

  2. Exciting White Lighting

    Energy.gov [DOE]

    Windows that emit light and are more energy efficient? Universal Display’s PHOLED technology enables windows that have transparent light-emitting diodes in them.

  3. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  4. Light Creation Materials

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management ... Lighting Science EFRCOverviewLight Creation Materials ...

  5. Leavenworth Tree Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Join HERO for our annual Leavenworth Tree Lighting Ceremony & Shopping SATURDAY DECEMBER 12, 2015 Leavenworth Christmas Lighting Festival Visitors return year after year for some...

  6. Tips: Shopping for Lighting

    Energy.gov [DOE]

    When shopping for lighting, you can now use the Lighting Facts label and lumens to compare bulbs and purchase a bulb with the amount of brightness you want.

  7. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    light by passing electricity through mercury vapor, which causes the fluorescent coating to glow or fluoresce. High-Efficiency Ballast (HEB): A lighting conservation feature...

  8. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    are also under consideration. Outside the DOE, the Environmental Protection Agency's Green Lights program promotes energy-efficient lighting as a means to reducing...

  9. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  10. residential-lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Efficiency Progress Report Evaluation Utility Toolkit Residential Lighting Market Research The Residential Lighting Market Research Project will estimate market savings from...

  11. Environmental Management Scientist Sets His Sights on Mars | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Environmental Management Scientist Sets His Sights on Mars Environmental Management Scientist Sets His Sights on Mars September 4, 2012 - 3:29pm Addthis Curiosity, left, at NASA’s Jet Propulsion Laboratory in Pasadena, California, in late November 2011. Shown here is the flight hardware that was being assembled prior to shipment to Cape Canaveral Air Force Station in Florida for the launch. | Photo Credit Dr. Robert C. Nelson Curiosity, left, at NASA's Jet Propulsion Laboratory

  12. Exploring Mars with Curiosity subject of next Los Alamos National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory Frontiers in science lectures Frontiers in Science lectures Exploring Mars with Curiosity subject of next Los Alamos National Laboratory Frontiers in science lectures Roger Wiens talks about the NASA Mars Curiosity rover. May 1, 2013 Roger Wiens and the Curiosity rover. Roger Wiens and the Curiosity rover. Contact Steve Sandoval Communications Office (505) 665-9206 Email Sponsored by the Fellows of Los Alamos National Laboratory, the Frontiers in Science lecture series is intended

  13. Cree LED Lighting Solutions Formerly LED Lighting Fixtures LLF...

    OpenEI (Open Energy Information) [EERE & EIA]

    LED Lighting Solutions Formerly LED Lighting Fixtures LLF Jump to: navigation, search Name: Cree LED Lighting Solutions (Formerly LED Lighting Fixtures (LLF)) Place: Morrisville,...

  14. Light Duty Combustion Research: Advanced Light-Duty Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and ...

  15. PFP Emergency Lighting Study

    SciTech Connect

    BUSCH, M.S.

    2000-02-02

    NFPA 101, section 5-9 mandates that, where required by building classification, all designated emergency egress routes be provided with adequate emergency lighting in the event of a normal lighting outage. Emergency lighting is to be arranged so that egress routes are illuminated to an average of 1.0 footcandle with a minimum at any point of 0.1 footcandle, as measured at floor level. These levels are permitted to drop to 60% of their original value over the required 90 minute emergency lighting duration after a power outage. The Plutonium Finishing Plant (PFP) has two designations for battery powered egress lights ''Emergency Lights'' are those battery powered lights required by NFPA 101 to provide lighting along officially designated egress routes in those buildings meeting the correct occupancy requirements. Emergency Lights are maintained on a monthly basis by procedure ZSR-12N-001. ''Backup Lights'' are battery powered lights not required by NFPA, but installed in areas where additional light may be needed. The Backup Light locations were identified by PFP Safety and Engineering based on several factors. (1) General occupancy and type of work in the area. Areas occupied briefly during a shiftly surveillance do not require backup lighting while a room occupied fairly frequently or for significant lengths of time will need one or two Backup lights to provide general illumination of the egress points. (2) Complexity of the egress routes. Office spaces with a standard hallway/room configuration will not require Backup Lights while a large room with several subdivisions or irregularly placed rooms, doors, and equipment will require Backup Lights to make egress safer. (3) Reasonable balance between the safety benefits of additional lighting and the man-hours/exposure required for periodic light maintenance. In some plant areas such as building 236-Z, the additional maintenance time and risk of contamination do not warrant having Backup Lights installed in all rooms

  16. Lighting Energy Conservation Measures | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology Deployment Efficient Technologies & Products Lighting Energy Conservation Measures Lighting Energy Conservation Measures Lighting Improvements Lighting ...

  17. Nuclear risk assessment for the Mars 2020 mission environmental impact statement.

    SciTech Connect

    Clayton, Daniel James; Bignell, John L.; Jones, Christopher Andrew; Rohe, Daniel Peter; Flores, Gregg J.; Bartel, Timothy James; Gelbard, Fred; Le, San; Morrow, Charles.; Potter, Donald L.; Young, Larry W.; Bixler, Nathan E.; Lipinski, Ronald J.

    2014-01-01

    In the summer of 2020, the National Aeronautics and Space Administration (NASA) plans to launch a spacecraft as part of the Mars 2020 mission. One option for the rover on the proposed spacecraft uses a Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) to provide continuous electrical and thermal power for the mission. An alternative option being considered is a set of solar panels for electrical power with up to 80 Light-Weight Radioisotope Heater Units (LWRHUs) for local component heating. Both the MMRTG and the LWRHUs use radioactive plutonium dioxide. NASA is preparing an Environmental Impact Statement (EIS) in accordance with the National Environmental Policy Act. The EIS will include information on the risks of mission accidents to the general public and on-site workers at the launch complex. This Nuclear Risk Assessment (NRA) addresses the responses of the MMRTG or LWRHU options to potential accident and abort conditions during the launch opportunity for the Mars 2020 mission and the associated consequences. This information provides the technical basis for the radiological risks of both options for the EIS.

  18. Pedestrian Friendly Outdoor Lighting

    SciTech Connect

    Miller, N. J.; Koltai, R. N.; McGowan, T. K.

    2013-12-01

    The GATEWAY program followed two pedestrian-scale lighting projects that required multiple mockups – one at Stanford University in California and the other at Chautauqua Institution in upstate New York. The report provides insight into pedestrian lighting criteria, how they differ from street and area lighting criteria, and how solid-state lighting can be better applied in pedestrian applications.

  19. LED Lighting Facts Snapshot: Indoor Ambient Lighting

    SciTech Connect

    2013-04-01

    LED Lighting Facts Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the program's online product list.

  20. LED Street Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    21, 2016 LED Street Lighting The American Medical Association's (AMA) recently adopted community guidance on street lighting adds another influential voice to issues that have been discussed in the lighting community for some time now, regarding light at night, its potential impacts on human health and the environment, and how best to minimize those impacts. While the AMA's guidance is intended to reduce the harmful human and environmental effects of street lighting in general, it focuses on

  1. lighting in the library

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The amount and quality of light around us affects our health, safety, comfort, and productivity. Our country spends more than $37 billion each year on electricity for lighting, but technologies developed during the past 10 years can help us cut lighting costs by 30% to 60% while enhancing lighting quality and reducing environmental impacts. In a typical indoor lighting system, 50 percent or more of the energy supplied to the lamp can be wasted by obsolete equipment, poor maintenance, or

  2. Propulsion engineering study for small-scale Mars missions

    SciTech Connect

    Whitehead, J.

    1995-09-12

    Rocket propulsion options for small-scale Mars missions are presented and compared, particularly for the terminal landing maneuver and for sample return. Mars landing has a low propulsive {Delta}v requirement on a {approximately}1-minute time scale, but at a high acceleration. High thrust/weight liquid rocket technologies, or advanced pulse-capable solids, developed during the past decade for missile defense, are therefore more appropriate for small Mars landers than are conventional space propulsion technologies. The advanced liquid systems are characterize by compact lightweight thrusters having high chamber pressures and short lifetimes. Blowdown or regulated pressure-fed operation can satisfy the Mars landing requirement, but hardware mass can be reduced by using pumps. Aggressive terminal landing propulsion designs can enable post-landing hop maneuvers for some surface mobility. The Mars sample return mission requires a small high performance launcher having either solid motors or miniature pump-fed engines. Terminal propulsion for 100 kg Mars landers is within the realm of flight-proven thruster designs, but custom tankage is desirable. Landers on a 10 kg scale also are feasible, using technology that has been demonstrated but not previously flown in space. The number of sources and the selection of components are extremely limited on this smallest scale, so some customized hardware is required. A key characteristic of kilogram-scale propulsion is that gas jets are much lighter than liquid thrusters for reaction control. The mass and volume of tanks for inert gas can be eliminated by systems which generate gas as needed from a liquid or a solid, but these have virtually no space flight history. Mars return propulsion is a major engineering challenge; earth launch is the only previously-solved propulsion problem requiring similar or greater performance.

  3. Mimicking Mars: A vacuum simulation chamber for testing environmental instrumentation for Mars exploration

    SciTech Connect

    Sobrado, J. M. Martín-Soler, J.; Martín-Gago, J. A.

    2014-03-15

    We have built a Mars environmental simulation chamber, designed to test new electromechanical devices and instruments that could be used in space missions. We have developed this environmental system aiming at validating the meteorological station Rover Environment Monitoring Station of NASA's Mars Science Laboratory mission currently installed on Curiosity rover. The vacuum chamber has been built following a modular configuration and operates at pressures ranging from 1000 to 10{sup −6} mbars, and it is possible to control the gas composition (the atmosphere) within this pressure range. The device (or sample) under study can be irradiated by an ultraviolet source and its temperature can be controlled in the range from 108 to 423 K. As an important improvement with respect to other simulation chambers, the atmospheric gas into the experimental chamber is cooled at the walls by the use of liquid-nitrogen heat exchangers. This chamber incorporates a dust generation mechanism designed to study Martian-dust deposition while modifying the conditions of temperature, and UV irradiated.

  4. Economic Development Benefits of the Mars Hill Wind Farm, Wind Powering America Rural Economic Development, Case Study (Fact Sheet)

    SciTech Connect

    Not Available

    2009-06-01

    This case study summarizes the economic development benefits of the Mars Hill Wind Farm to the community of Mars Hill, Maine. The Mars Hill Wind Farm is New England's first utility-scale wind farm.

  5. Evaluation of sweet sorghum as a potential ethanol crop in Mississippi

    SciTech Connect

    Horton, David Scott

    2011-08-01

    Petroleum prices have made alternative fuel crops a viable option for ethanol production. Sweet sorghum [Sorghum bicolor] is a non-food crop that may produce large quantities of ethanol with minimal inputs. Eleven cultivars were planted in 2008 and 2009 as a half-season crop. Four-row plots 6.9 m by 0.5 m, were monitored bimonthly for °Brix, height, and sugar accumulation. Yield and extractable sap were taken at the end of season. Stalk yield was greatest for the cultivar Sugar Top (4945 kg ha-1) and lowest for Simon (1054 kg ha-1). Dale ranked highest ethanol output (807 L ha-1) while Simon (123 L ha-1) is the lowest. All cultivars peak Brix accumulation occurs in early October. Individual sugar concentrations indicated sucrose is the predominant sugar with glucose and fructose levels dependent on cultivar. Supplemental ethanol in fermented wort was the best preservative tested to halt degradation of sorghum wort.

  6. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  7. How a weird Mars rock may be solid proof of an ancient oxygen...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Weird Mars rock may be solid proof of ancient oxygen atmosphere How a weird Mars rock may be solid proof of an ancient oxygen atmosphere When researchers found a compound that ...

  8. Lighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homes & Buildings » Lighting & Daylighting » Lighting Basics Lighting Basics August 15, 2013 - 5:12pm Addthis Text Version There are many different types of artificial lights (formally called "lamps" in the lighting industry,) which have different applications and uses. Types of lighting include: Fluorescent Lighting High-intensity Discharge Lighting Incandescent Lighting LED Lighting. New lamp designs that use energy-efficient technology are now readily available in the

  9. Electron Communities The Next Mars Rover What's Lacking with Fracking

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Communities The Next Mars Rover What's Lacking with Fracking Mini Satellites with Mega Payoff L o s A l a m o s S c i e n c e a n d Te c h n o l o g y M a g a z i n e | O c t o b e r 2 0 1 5 1663 October 2015 The Curiosity rover has been traversing Mars's surface for over three years. This self-portrait is a composite of many images that were taken in one day by the Mars Hand Lens Imager (MAHLI) camera, which sits atop a turret at the end of a long robotic arm. When the images were digitally

  10. Solid-State Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ... Twitter Google + Vimeo Newsletter Signup SlideShare Solid-State Lighting HomeSolid-State ...

  11. Connected Lighting Systems Meeting

    Office of Energy Efficiency and Renewable Energy (EERE)

    There is a lot of buzz today about the Internet of Things and the convergence of intelligent controllable light sources, communication networks, sensors, and data exchange in future lighting...

  12. CONNECTED LIGHTING SYSTEMS MEETING

    Office of Energy Efficiency and Renewable Energy (EERE)

    There is a lot of buzz today about the Internet of Things and the convergence of intelligent controllable light sources, communication networks, sensors, and data exchange in future lighting...

  13. lighting in the library

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Determine the Feasibility of Installing Energy Efficient Lighting In this part of the exercise, you will plan a new approach to lighting your school library. This new plan will use ...

  14. lighting in the library

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The amount and quality of light around us affects our health, safety, comfort, and productivity. Our country spends more than 37 billion each year on electricity for lighting, but ...

  15. Mirror Advanced Reactor Study (MARS): executive summary and overview

    SciTech Connect

    Logan, B.G.; Perkins, L.J.; Gordon, J.D.

    1984-07-01

    Two self-consistent MARS configurations are discussed - a 1200-MWe commercial electricity-generating plant and a synguels-generating plant that produces hydrogen with an energy equivalent to 26,000 barrels of oil per day. The MARS machine emphasizes the attractive features of the tandem mirror concept, including steady-state operation, a small-diameter high-beta plasma, a linear central cell with simple low-maintenance blankets, low first-wall heat fluxes (<10 W/cm/sup 2/), no driven plasma currents or associated disruptions, natural halo impurity diversion, and direct conversion of end-loss charged-particle power. The MARS electric plant produces 2600 MW of fusion power in a 130-m-long central cell. Advanced tandem-mirror plasma-engineering concepts, a high-efficiency liquid lithium-lead (Li/sub 17/Pb/sub 83/) blanket, and efficient direct electrical conversion of end loss power combine to produce a high net plant efficiency of 36%. With a total capital cost of $2.9 billion (constant 1983 dollars), the MARS electric plant produces busbar electricity at approx. 7 cents/kW-hour. The MARS synfuels plant produces 3500 MW of fusion power in a 150-m-long central cell. A helium-gas-cooled silicon carbide pebble-bed blanket provides high-temperature (1000/sup 0/C) heat to a thermochemical water-splitting cycle and the resulting hydrogen is catalytically converted to methanol for distribution. With a total capital cost of $3.6 billion (constant 1983 dollars), the synfuels plant produces methanol fuel at about $1.7/gal. The major features of the MARS reactor include sloshing-ion thermal barrier plugs for efficient plasma confinement, a high efficiency blanket, high-field (24-T) choke cells, drift pumping for trapped plasma species, quasi-optical electron-cyclotron resonant heating (ECRH) systems, and a component gridless direct converter.

  16. Commercial / Industrial Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Commercial Program Development Commercial Current Promotions Industrial Federal Agriculture Commercial & Industrial Lighting Efficiency Program The Commercial & Industrial...

  17. lighting in the library

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Determine the Feasibility of Installing Energy Efficient Lighting In this part of the exercise, you will plan a new approach to lighting your school library. This new plan will use less energy, cost less, and result in less greenhouse gas. Your plan will also include bottom line calculations and decision factors such as: identifying the costs and payback for buying and installing new lighting equipment and making a determination about whether or not the new, more efficient lighting will provide

  18. Powering Curiosity: Lab Tech Goes to Mars | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Curiosity: Lab Tech Goes to Mars Powering Curiosity: Lab Tech Goes to Mars August 6, 2012 - 9:14am Addthis One of the first images taken by NASA's Curiosity rover was taken on the left-rear side of the rover looking directly into the sun. | Photo courtesy of NASA/JPL-Caltech. One of the first images taken by NASA's Curiosity rover was taken on the left-rear side of the rover looking directly into the sun. | Photo courtesy of NASA/JPL-Caltech. Michael Hess Michael Hess Former Digital

  19. Microsoft Word - ex1b-ITER-mar07.doc

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    B - Patent Rights - Acquisition by the Government - ITER UT-B Contracts Div March 2007 Page 1 of 6 ex1b-ITER-mar07.doc Exhibit 1B ITER Ref: DEAR 952.227-13 PATENT RIGHTS - ACQUISITION BY THE GOVERNMENT - ITER (Mar 2007) (a) Definitions. (1) "Invention", as used in this clause, means any invention or discovery which is or may be patentable or otherwise protectable under title 35 of the United States Code or any novel variety of plant that is or may be protectable under the Plant Variety

  20. Energy Department Nuclear Systems Are Powering Mars Rover

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    doe logo U.S. Department of Energy Office of Public Affairs Media Contact: 202-586-4940 For Immediate Release: Monday, November 28, 2011 Energy Department Nuclear Systems Are Powering Mars Rover 2011 Marks 50th Anniversary of Nuclear-Powered Space Missions Washington, D.C. � The Mars Science Laboratory rover, which launched from Cape Canaveral this weekend, is powered by nuclear systems developed by the U.S. Department of Energy (DOE), marking the 28th space mission supported by nuclear

  1. COLLOQUIUM: Exploring Mars With Curiosity and Its Laser | Princeton Plasma

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Physics Lab April 3, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: Exploring Mars With Curiosity and Its Laser Dr. Roger C. Wiens Los Alamos National Laboratory Presentation: File WC03APR2013_RCWiens.pptx The ChemCam instrument on board the Curiosity Mars rover employs laser-induced breakdown spectroscopy (LIBS) to determine the chemical composition of rock and soil samples up to 7 m from the rover. Its Nd:KGW laser projects 14 mJ pulses at 1067 nm onto 350-550 µm spots,

  2. Celebrating the Curiosity Rover's Killer Mars Landing | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Celebrating the Curiosity Rover's Killer Mars Landing Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Celebrating the Curiosity Rover's Killer Mars Landing Adam Rasheed 2012.08.07 Wow! What an entrance! I'd have to say that screaming in at 6 km/s (13400 mph), while glowing a red-hot 2400 K (3800 F), followed by a Mach 2

  3. Induction Lighting: An Old Lighting Technology Made New Again | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Induction Lighting: An Old Lighting Technology Made New Again Induction Lighting: An Old Lighting Technology Made New Again July 27, 2009 - 5:00am Addthis John Lippert Induction lighting is one of the best kept secrets in energy-efficient lighting. Simply stated, induction lighting is essentially a fluorescent light without electrodes or filaments, the items that frequently cause other bulbs to burn out quickly. Thus, many induction lighting units have an extremely long life of up

  4. Effective White Light Options for Parking Area Lighting | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Effective White Light Options for Parking Area Lighting Effective White Light Options for Parking Area Lighting Document details lighting technologies that provide low-maintenance alternatives to high-pressure sodium lighting. Download the document detailing effective white light options for parking area lighting. (189.54 KB) More Documents & Publications LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center Demonstration Assessment of

  5. DOE-LPO_Email-Update_014_Final_2-Mar-2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4_Final_2-Mar-2016 DOE-LPO_Email-Update_014_Final_2-Mar-2016 DOE-LPO_Email-Update_014_Final_2-Mar-2016.pdf (705.36 KB) More Documents & Publications DOE-LPO_Email-Update_013_Final_2-Feb-2016 LPO Update, 28-Jul-2016 LPO Update, 29-Sep

  6. OLED Lighting in the Offices of Aurora Lighting Design, Inc.

    Energy.gov [DOE] (indexed site)

    the Offices of Aurora Lighting Design, Inc. DOE Booth Pacific Northwest National Laboratory Leslie North, DesignerPrincipal Aurora Lighting Design, Inc. 2 OLED Lighting at Aurora ...

  7. Light emitting device comprising phosphorescent materials for white light generation

    DOEpatents

    Thompson, Mark E.; Dapkus, P. Daniel

    2014-07-22

    The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

  8. The Mars Hopper: a radioisotope powered, impulse driven, long-range, long-lived mobile platform for exploration of Mars

    SciTech Connect

    Steven D. Howe; Robert C. O'Brien; William Taitano; Doug Crawford; Nathan Jerred; Spencer Cooley; John Crapeau; Steve Hansen; Andrew Klein; James Werner

    2011-02-01

    Planetary exploration mission requirements are becoming more demanding. Due to the increasing cost, the missions that provide mobile platforms that can acquire data at multiple locations are becoming more attractive. Wheeled vehicles such as the MER rovers have proven extremely capable but have very limited range and cannot traverse rugged terrain. Flying vehicles such as balloons and airplanes have been proposed but are problematic due to the very thin atmospheric pressure and the strong, dusty winds present on Mars. The Center for Space Nuclear Research has designed an instrumented platform that can acquire detailed data at hundreds of locations during its lifetime - a Mars Hopper. The Mars Hopper concept utilizes energy from radioisotopic decay in a manner different from any existing radioisotopic power sources—as a thermal capacitor. By accumulating the heat from radioisotopic decay for long periods, the power of the source can be dramatically increased for short periods. The platform will be able to "hop" from one location to the next every 5-7 days with a separation of 5-10 km per hop. Preliminary designs show a platform that weighs around 52 kgs unfueled which is the condition at deployment. Consequently, several platforms may be deployed on a single launch from Earth. With sufficient lifetime, the entire surface of Mars can be mapped in detail by a couple dozen platforms. In addition, Hoppers can collect samples from all over the planet, including gorges, mountains and crevasses, and deliver them to a central location for eventual pick-up by a Mars Sample Return mission. The status of the Mars Hopper development project at the CSNR is discussed.

  9. Light-storing photocatalyst

    SciTech Connect

    Zhang Junying; Pan Feng; Hao Weichang; Ge Qi; Wang Tianmian

    2004-12-06

    Light-storing photocatalyst was prepared by coating light-storing phosphor and TiO{sub 2} photocatalyst in sequence on ceramic. The light-storing photocatalyst can store light irradiation and emit slowly. Consequently, the photocatalyst remains active when the irradiation source is cut off. Rhodamine B (RhB) can be decomposed efficiently by this photocatalyst in the dark after it absorbs light irradiation. This photocatalyst is photoreactive in an outdoor environment or can save energy by supplying irradiation intermittently for the photocatalyst.

  10. Photonic crystal light source

    DOEpatents

    Fleming, James G.; Lin, Shawn-Yu; Bur, James A.

    2004-07-27

    A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

  11. A case for Mars: A case for nuclear thermal rockets

    SciTech Connect

    Neuman, J.E.; Van Haaften, D.H.; Madsen, W.W.

    1990-01-01

    It is now possible to make general comparisons of candidate propulsion systems for human exploration of Mars. Preliminary review indicates that the propulsion system most likely to meet all mission requirements is the Nuclear Thermal Rocket (NTR). Advanced cryogenic chemical propulsion systems achieve a maximum specific impulse (Isp) of about 470 seconds. The Nuclear Engine for Rocket Vehicle Application (NERVA) program of the 1960's built engines with Isp's of about 825 seconds. Performance of an NTR depends on achievable materials temperatures, but materials has progressed significantly since the 1960's. Also, some of the current research undertaken to improve chemical rocket performance, such as aerobraking or schemes to minify payload, applies to an NTR as well, although it is not essential. The NTR is reusable, and can be developed into a complete space transportation system. Only 3--4% of the nuclear fuel would be used in a Mars mission, and an engine can be used until about 40% of the fuel is expended. Nuclear thermal rockets can take mankind to the moon, to Mars, and beyond, but development must begin now. There is potential for orderly growth into nuclear concepts far beyond NERVA. Using chemical propulsion for lunar missions and delaying NTR development will only result in higher costs and delayed or cancelled Mars missions.

  12. Science Results from the Mars Exploration Rover Mission

    ScienceCinema

    Squyres, Steven [Cornell University, Ithaca, New York, United States

    2016-07-12

    One of the most important scientific goals of the mission was to find and identify a variety of rocks and soils that provide evidence of the past presence of water on the planet. To obtain this information, Squyres is studying the data obtained on Mars by several sophisticated scientific instruments.

  13. Earth plus Mars: Los Alamos National Lab partners with Spain and France

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Earth plus Mars: Los Alamos National Lab partners with Spain and France Earth plus Mars: Los Alamos National Lab partners with Spain and France New Mexico's role in the next mission to Mars will also be part of a tri-national Earthly collaboration, officials say. June 26, 2015 New Mexico's role in the next mission to Mars will also be part of a tri-national Earthly collaboration, officials say. New Mexico's role in the next mission to Mars will also be part of a tri-national Earthly

  14. How a weird Mars rock may be solid proof of an ancient oxygen atmosphere

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Weird Mars rock may be solid proof of ancient oxygen atmosphere How a weird Mars rock may be solid proof of an ancient oxygen atmosphere When researchers found a compound that shouldn't have been there, it revealed a missing piece of Mars' history. August 1, 2016 How a weird Mars rock may be solid proof of an ancient oxygen atmosphere The Gale Crater captured by the Thermal Emission Imaging System (THEMIS) on NASA's Mars Odyssey orbiter. CREDIT: NASA/JPL-Caltech/Arizona State University How a

  15. Design and Structural Analysis of Mars Rover RTG

    SciTech Connect

    Schock, Alfred; Hamrick, T.; Sankarankandath, V.; Shirbacheh, M.

    1989-09-29

    The paper describes the design and the structural and mass analysis of a Radioisotope Thermoelectric Generators (RTGs) for powering the MARS Rover vehicle, which is a critical element of the unmanned Mars Rover and Sample Return mission (MRSR). The RTG design study was conducted by Fairchild Space Company for the U.S. Department of Energy, in support of the Jet Propulsion Laboratory's MRSR project.; The paper briefly describes a reference mission scenario, an illustrative Rover design and activity pattern on Mars, and its power system requirements and environmental constraints, including the RTG cooling requirements during transit to Mars. It identifies the key RTG design problem, i.e. venting the helium generated by the fuel's alpha decay without intrusion of the Martian atmosphere into the RTG, and proposes a design approach for solving that problem.; Using that approach, it describes a very conservative baseline RTG design. The design is based on the proven and safety-qualified General Purpose Heat Source module, and employs standard thermoelectric unicouples whose reliability and performance stability has been extensively demonstrated on previous space missions. The heat source of the 250-watt RTG consists of a stack of 18 separate modules that is supported at its ends but not along its length. The paper describes and analyzes the structure that holds the stack together during Earth launch and Mars operations but allows it to come apart in case of an inadvertent reentry.; A companion paper presented at this conference describes the RTG's thermal and electrical analysis, and compares its performance with that of several lighter but less conservative design options.; There is a duplicate copy in the ESD files. This document is not relevent to OSTI Library. Do not send.

  16. MAR flow mapping of Analytical Chemistry Operations (Preliminary Report)

    SciTech Connect

    Barr, Mary E.; Farish, Thomas J.

    2012-06-13

    The recently released Supplemental Directive, NA-1 SD 1027, updates the radionuclide threshold values in DOE-STD-1027-92 CN1 to reflect the use of modern parameters for dose conversion factors and breathing rates. The directive also corrects several arithmetic errors within the original standard. The result is a roughly four-fold increase in the amount of weapons-grade nuclear material allowed within a designated radiological facility. Radiological laboratory space within the recently constructed Radiological Laboratory Office and Utility Building (RLUOB) is slated to house selected analytical chemistry support activities in addition to small-scale actinide R&D activities. RLUOB is within the same facility operations envelope as TA-55. Consolidation of analytical chemistry activities to RLUOB and PF-4 offers operational efficiency improvements relative to the current pre-CMRR plans of dividing these activities between RLUOB, PF-4, and CMR. RLUOB is considered a Radiological Facility under STD-1027 - 'Facilities that do not meet or exceed Category 3 threshold criteria but still possess some amount of radioactive material may be considered Radiological Facilities.' The supplemental directive essentially increases the allowable material-at-risk (MAR) within radiological facilities from 8.4 g to 38.6 g for {sup 239}Pu. This increase in allowable MAR provides a unique opportunity to establish additional analytical chemistry support functions in RLUOB without negatively impacting either R&D activities or facility operations. Individual radiological facilities are tasked to determine MAR limits (up to the Category 3 thresholds) appropriate to their operational conditions. This study presents parameters that impact establishing MAR limits for RLUOB and an assessment of how various analytical chemistry support functions could operate within the established MAR limits.

  17. Light metal production

    DOEpatents

    Fan, Qinbai

    2016-04-19

    An electrochemical process for the production of light metals, particularly aluminum. Such a process involves contacting a light metal source material with an inorganic acid to form a solution containing the light metal ions in high concentration. The solution is fed to an electrochemical reactor assembly having an anode side containing an anode and a cathode side containing a cathode, with anode side and the cathode side separated by a bipolar membrane, with the solution being fed to the anode side. Light metal ions are electrochemically transferred through the bipolar membrane to the cathode side. The process further involves reducing the light metal ions to light metal powder. An associated processing system is also provided.

  18. Light diffusing fiber optic chamber (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: light; diffusing; fiber; optic; chamber; light; diffusion; transmitting; light; target; light; transmitted; ...

  19. High efficiency incandescent lighting

    DOEpatents

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  20. National Synchrotron Light Source

    ScienceCinema

    BNL

    2016-07-12

    A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

  1. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  2. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  3. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    (CEC), March 1990. Advanced Lighting Technologies Application Guidelines (ALTAG), Building and Appliance Efficiency Office. 3. Dubin, F.S., Mindell, H.L., and Bloome, S., 1976....

  4. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    energy are presented in this section. Statistics are presented by subgroups based on building characteristics, and by subgroups based on lighting equipment. The three sets of...

  5. White Light Creation Architectures

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management ... White Light Creation Architectures Overview Brief History of ...

  6. Comparing Light Bulbs

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

  7. And there was light

    SciTech Connect

    Bertulani, C. A.

    2015-02-24

    I discuss the use of light as a collection of real and virtual photons to study some lingering questions in particle and nuclear physics.

  8. Extragalactic Background Light

    Office of Scientific and Technical Information (OSTI)

    Extragalactic Background Light from Hierarchical Galaxy Formation: Gamma-ray Attenuation up to the Epoch of Cosmic Reionization and the First Stars Yoshiyuki Inoue 1 , Susumu Inoue...

  9. Lighting Test Facilities

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lighting-Test-Facilities Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors Technology &...

  10. Incandescent Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting » Incandescent Lighting Incandescent Lighting Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lighting is the most common, and least energy efficient, type of lighting used in homes. | Photo courtesy of ©iStockphoto/TokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings. Although

  11. Light intensity compressor

    DOEpatents

    Rushford, Michael C.

    1990-01-01

    In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

  12. Explosively pumped laser light

    DOEpatents

    Piltch, Martin S.; Michelotti, Roy A.

    1991-01-01

    A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

  13. Solid-State Lighting-Lighting Facts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Facts Solid-State Lighting-Lighting Facts Presenter: Marc Ledbetter, Pacific Northwest National Laboratory The LED Lighting Facts program provides credible, verified performance information about light-emitting diode (LED) lighting products to retailers, utilities, specifiers, energy efficiency program sponsors, and lighting users. The goal is to enable widespread market adoption of energy-efficient LED products by removing the lack-of-information market barrier. For the solid-state

  14. Reducing the risk to Mars: The gas core nuclear rocket

    SciTech Connect

    Howe, S. D.; DeVolder, B.; Thode, L.; Zerkle, D.

    1998-01-15

    The next giant leap for mankind will be the human exploration of Mars. Almost certainly within the next thirty years, a human crew will brave the isolation, the radiation, and the lack of gravity to walk on and explore the Red planet. However, because the mission distances and duration will be hundreds of times greater than the lunar missions, a human crew will face much greater obstacles and a higher risk than those experienced during the Apollo program. A single solution to many of these obstacles is to dramatically decrease the mission duration by developing a high performance propulsion system. The gas-core nuclear rocket (GCNR) has the potential to be such a system. We have completed a comparative study of the potential impact that a GCNR could have on a manned Mars mission. The total IMLEO, transit times, and accumulated radiation dose to the crew will be compared with the NASA Design Reference Missions.

  15. Reducing the risk to Mars: The gas core nuclear rocket

    SciTech Connect

    Howe, S.D.; DeVolder, B.; Thode, L.; Zerkle, D.

    1998-12-31

    The next giant leap for mankind will be the human exploration of Mars. Almost certainly within the next thirty years, a human crew will brave the isolation, the radiation, and the lack of gravity to walk on and explore the Red planet. However, because the mission distances and duration will be hundreds of times greater than the lunar missions, a human crew will face much greater obstacles and a higher risk than those experienced during the Apollo program. A single solution to many of these obstacles is to dramatically decrease the mission duration by developing a high performance propulsion system. The gas-core nuclear rocket (GCNR) has the potential to be such a system. The authors have completed a comparative study of the potential impact that a GCNR could have on a manned Mars mission. The total IMLEO, transit times, and accumulated radiation dose to the crew will be compared with the NASA Design Reference Missions.

  16. Nuclear Design of the HOMER-15 Mars Surface Fission Reactor

    SciTech Connect

    Poston, David I.

    2002-07-01

    The next generation of robotic missions to Mars will most likely require robust power sources in the range of 3 to 20 kWe. Fission systems are well suited to provide safe, reliable, and economic power within this range. The goal of this study is to design a compact, low-mass fission system that meets Mars surface power requirements, while maintaining a high level of safety and reliability at a relatively low cost. The Heat pipe Power System (HPS) is one possible approach for producing near-term, low-cost, space fission power. The goal of the HPS project is to devise an attractive space fission system that can be developed quickly and affordably. The primary ways of doing this are by using existing technology and by designing the system for inexpensive testing. If the system can be designed to allow highly prototypic testing with electrical heating, then an exhaustive test program can be carried out quickly and inexpensively, and thorough testing of the actual flight unit can be performed - which is a major benefit to reliability. Over the past 4 years, three small HPS proof-of-concept technology demonstrations have been conducted, and each has been highly successful. The Heat pipe-Operated Mars Exploration Reactor (HOMER) is a derivative of the HPS designed especially for producing power on the surface of Mars. The HOMER-15 is a 15-kWt reactor that couples with a 3-kWe Stirling engine power system. The reactor contains stainless-steel (SS)-clad uranium nitride (UN) fuel pins that are structurally and thermally bonded to SS/sodium heat pipes. Fission energy is conducted from the fuel pins to the heat pipes, which then carry the heat to the Stirling engine. This paper describes conceptual design and nuclear performance the HOMER-15 reactor. (author)

  17. Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel

    SciTech Connect

    Eley, C.; Tolen, T. Associates, San Francisco, CA ); Benya, J.R. )

    1992-12-01

    Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

  18. ChemCam rock laser for Mars Science Laboratory "Curiosity"

    ScienceCinema

    Wiens, Roger

    2014-08-12

    Los Alamos has a long history of space-related instruments, tied primarily to its role in defense-related treaty verification. Space-based detectors have helped determine the differences between signals from lightning bolts and potential nuclear explosions. LANL-developed gamma-ray detection instruments first revealed the existence of what we now know as gamma-ray bursts, an exciting area of astrophysical research. And the use of LANL instruments on varied space missions continues with such products as the ChemCam rock laser for NASA, shown here. The Engineering Model of the ChemCam Mars Science Laboratory rover instrument arrived at NASA's Jet Propulsion Laboratory on February 6, 2008. The Flight Model was shipped in August, 2010 for installation on the rover at JPL. ChemCam will use imaging and laser-induced breakdown spectroscopy (LIBS) to determine rock and soil compositions on Mars, up to 9 meters from the rover. The engineering model is being integrated into the rover test bed for the development and testing of the rover software. The actual flight model components were concurrently assembled at Los Alamos and in Toulouse, France. The Mars Science Laboratory is scheduled to launch in 2011. Animations courtesy of JPL/NASA.

  19. ChemCam Rock Laser for the Mars Science Laboratory

    ScienceCinema

    LANL

    2009-09-01

    Los Alamos has a long history of space-related instr... Los Alamos has a long history of space-related instruments, tied primarily to its role in defense-related treaty verification. Space-based detectors have helped determine the differences between signals from lightning bolts and potential nuclear explosions. LANL-developed gamma-ray detection instruments first revealed the existence of what we now know as gamma-ray bursts, an exciting area of astrophysical research. And the use of LANL instruments on varied space missions continues with such products as the ChemCam rock laser for NASA, shown here. The Engineering Model of the ChemCam Mars Science Laboratory rover instrument arrived at NASA's Jet Propulsion Laboratory on February 6, 2008. ChemCam will use imaging and laser-induced breakdown spectroscopy (LIBS) to determine rock and soil compositions on Mars, up to 9 meters from the rover. The engineering model is being integrated into the rover test bed for the development and testing of the rover software. The actual flight model components are concurrently being assembled at Los Alamos and in Toulouse, France, and will be delivered to JPL in July. The Mars Science Laboratory is scheduled to launch in 2009. Animations courtesy of JPL/NASA.

  20. HERO Leavenworth Tree Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    HERO Leavenworth Shopping and Christmas Lighting Festival We'll take you, friends and family, to a Leavenworth that is particularly magical in the Christmas season. There is something for everyone, from roasted chestnuts at the gazebo, to shopping and sleigh rides...all just minutes away! And at dusk, everyone gathers to witness the lighting of a magical wonderland, as they light up the village and park. With a greeting from "Old Saint Nick" at the gazebo, the Leavenworth Christmas

  1. Lighting in the Library

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    lores.pdf (1.43

    hires.pdf (1.65

    The purpose of the Lighting in the Library Activity is to calculate the electricity used to provide lighting in the school library and determine the feasibility of saving energy and money by using energy efficient lighting fixtures. Your students will assume the role of an energy auditor assigned the task of assessing the current situation and making a recommendation for energy-efficient improvements. This activitity requires a trip to the library, an

  2. Green Light Pulse Oximeter

    DOEpatents

    Scharf, John Edward

    1998-11-03

    A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

  3. White light velocity interferometer

    DOEpatents

    Erskine, D.J.

    1997-06-24

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  4. White light velocity interferometer

    DOEpatents

    Erskine, David J.

    1997-01-01

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

  5. White light velocity interferometer

    DOEpatents

    Erskine, David J.

    1999-01-01

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

  6. White light velocity interferometer

    DOEpatents

    Erskine, D.J.

    1999-06-08

    The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

  7. Lighting Controls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Controls Lighting Controls Use lighting controls to automatically turn lights on and off as needed, and save energy. Use lighting controls to automatically turn lights on and off as needed, and save energy. Use lighting controls to automatically turn lights on and off as needed, and save energy. Of course you can save energy by turning off lights when they're not needed, but sometimes we forget or don't notice that we've left them on. The most common types of lighting controls include: Dimmers

  8. National Synchrotron Light Source

    ScienceCinema

    None

    2016-07-12

    A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

  9. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    5.2 152.6 160.5 54.6 Assembly Health Care Lodging Office 0 20 40 60 80 100 120 140 160 180 Energy Information Administration Energy Consumption Series: Lighting in Commercial...

  10. Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting

    SciTech Connect

    Kinzey, B. R.; Myer, M. A.

    2009-11-01

    A U.S. Department of Energy Solid-State Lighting Gateway Report on a Demonstration Assessment of Light-Emitting Diode (LED) Roadway Lighting in Lija Loop, Portland, Oregon.

  11. Lakeview Light and Power- Commercial Lighting Rebate Program

    Energy.gov [DOE]

    Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

  12. Peninsula Light Company PenLight | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Company PenLight Jump to: navigation, search Name: Peninsula Light Company (PenLight) Place: Gig Harbor, Washington State Zip: 98335-0078 Product: Member-owned electric cooperative...

  13. DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

    SciTech Connect

    BURKE CA; LANDON MR; HANSON CE

    2012-01-30

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.

  14. In the OSTI Collections: Department of Energy R&D for the Mars Science

    Office of Scientific and Technical Information (OSTI)

    Laboratory | OSTI, US Dept of Energy Office of Scientific and Technical Information In the OSTI Collections: Department of Energy R&D for the Mars Science Laboratory Some key technology for the Mars Science Laboratory "Curiosity" was developed by U. S. Department of Energy laboratories-especially the Multi-Mission Radioisotope Thermoelectric Generator ("MMRTG") that keeps Curiosity functioning on Mars, and the Chemistry Camera ("ChemCam") designed to

  15. NASA agreements advance Mars exploration, Los Alamos Rover instrument a key

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    component NASA agreements advance Mars exploration NASA agreements advance Mars exploration, Los Alamos Rover instrument a key component Los Alamos National Laboratory is coordinating with the French science and engineering team on developing SuperCam. June 17, 2015 SuperCam builds upon the successful capabilities demonstrated by ChemCam aboard the Curiosity Rover during NASA's current Mars Mission. SuperCam will allow researchers to sample rocks and other targets from a distance using a

  16. DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

    SciTech Connect

    BURKE CA; LANDON MR; HANSON CE

    2011-11-08

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are beinglhave been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.

  17. Development and Deployment of the Mobile Arm Retrieval System (MARS) - 12187

    SciTech Connect

    Burke, Christopher A.; Landon, Matthew R.; Hanson, Carl E.

    2012-07-01

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012. (authors)

  18. Solid state lighting component

    DOEpatents

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  19. Solid state lighting component

    DOEpatents

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  20. In the OSTI Collections: Department of Energy R&D for the Mars...

    Office of Scientific and Technical Information (OSTI)

    ... "Methodology assessment and recommendations for the Mars science laboratory launch safety analysis" "The development of a realistic source term for sodium-cooled fast reactors: ...

  1. Columbia Water & Light- HVAC and Lighting Efficiency Rebates

    Office of Energy Efficiency and Renewable Energy (EERE)

    Columbia Water & Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

  2. Peninsula Light Company- Commercial Efficient Lighting Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

  3. And the Oscar for Sustainable Mobile Lighting Goes to.... Lighting...

    Energy.gov [DOE] (indexed site)

    There are about 100,000 diesel-powered mobile lighting towers in the United States, ... building, and testing a mobile lighting tower powered by hydrogen fuel cell ...

  4. Energy Savings Estimates of Light Emitting Diodes in Niche Lighting...

    Energy.gov [DOE] (indexed site)

    Estimates of Light Emitting Diodes in Niche Lighting Applications Prepared for: Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S. Department of ...

  5. LED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    focusing light in ways that are useful in homes and commercial settings. The light-emitting diode (LED) is one of today's most energy-efficient and rapidly-developing lighting...

  6. Lighting Design | Department of Energy

    Energy Saver

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways ... Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the ...

  7. Lighting Control Energy Savings

    Energy Science and Technology Software Center

    1985-01-01

    CONTROLITE 1.0 is a lighting energy analysis program designed to calculate the energy savings and cost benefits obtainable using lighting controls in buildings. The program can compute the lighting energy reductions that result from using daylighting, scheduling, and other control strategies. When modeling daylight control systems, the program uses QUICKLITE to compute the daylight illuminances at specified points 5 times a day, 12 days a year (the 21st of each month), and for two skymore » conditions (clear and overcast skies). Fourier series techniques are used to fit a continuous curve through the computed illuminance points. The energy use for each of the 12 days is then computed given user-specified power-in/light-out characteristics of the modeled control system. The monthly and annual energy usage for overcast and clear conditions are found separately by fitting two long-term Fourier series curves to the energy use computed for each of the 12 days. Finally, the monthly energy use is calculated by taking a weighted average for the monthly energy use computed for the overcast and clear sky conditions. The program only treats the energy use directly attributable to lighting. The impact of lighting control strategies on building thermal loads is not computed. The program allows input of different control schedules (i.e., on/off times for the lighting system) for each day of the week, but every week of the year is treated the same; thus, holidays cannot be modeled explicitly. When used for daylighting purposes, CONTROLITE1.0 understands only clear and overcast conditions. User-supplied values for the proportion of clear and overcast hours for each month of the year are required to accommodate different climatic conditions.« less

  8. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of

  9. Outdoor Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Outdoor Lighting Outdoor Lighting Outdoor lighting consumes a significant amount of energy-about 1.3 quadrillion Btu annually-costing about $10 billion per year. In the last five years, a number of municipalities have switched to new LED technologies that can reduce energy costs by approximately 50% over conventional lighting technologies and provide additional savings of 20 to 40% with advance lighting controls. Beyond cost and energy savings, the higher efficiency of LED lights provides other

  10. Light diffusing fiber optic chamber

    DOEpatents

    Maitland, Duncan J.

    2002-01-01

    A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

  11. Demonstration of LED Street Lighting

    SciTech Connect

    Kinzey, B. R.; Royer, M. P.; Hadjian, M.; Kauffman, R.

    2013-06-01

    GATEWAY program and Municipal Solid-State Street Lighting Consortium report on a demonstration of LED street lighting in Kansas City, MO.

  12. GATEWAY Demonstrations: LED Street Lighting

    SciTech Connect

    Cook, Tyson; Shackelford, Jordan; Pang, Terrance Pang

    2008-12-01

    This report summarizes an assessment project conducted to study the performance of light emitting diode (LED) luminaires in a street lighting application in San Francisco, CA.

  13. Lighting in Commercial Buildings, 1986

    Energy Information Administration (EIA) (indexed site)

    Lighting in Commercial Buildings --1986 Overview Full Report and Tables Detailed analysis of energy consumption for lighting for U.S. commercial buildings. previous page...

  14. Shedding Light on Nanocrystal Defects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Shedding Light on Nanocrystal Defects Shedding Light on Nanocrystal Defects Print Thursday, 20 June 2013 10:41 Nanocrystals have been the focus of much scientific interest lately,...

  15. Lighting Controls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    fluorescent lighting fixtures rather than replace them. Dimmers and LEDs Some light-emitting diode (LED) lightbulbs can be used with dimmers. LED bulbs and fixtures must be...

  16. LED Lighting | Department of Energy

    Office of Environmental Management (EM)

    of lighting in the United States. Residential LEDs -- especially ENERGY STAR rated products -- use at least 75% less energy, and last 25 times longer, than incandescent lighting. ...

  17. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    as part of your whole-house design -- an approach for building an energy-efficient home. Indoor Lighting Design When designing indoor lighting for energy efficiency,...

  18. New light on human evolution

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    light on human evolution New light on human evolution Scientists recently unearthed 8 million-year-old gorilla fossils from the Chorora Formation in Ethiopia, which indicate the ...

  19. Pupillary efficient lighting system

    DOEpatents

    Berman, Samuel M.; Jewett, Don L.

    1991-01-01

    A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

  20. Sneaky light stop

    DOE PAGES [OSTI]

    Eifert, Till; Nachman, Benjamin

    2015-02-20

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Duemore » to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.« less

  1. Sneaky light stop

    SciTech Connect

    Eifert, Till; Nachman, Benjamin

    2015-04-01

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Due to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.

  2. Sneaky light stop

    SciTech Connect

    Eifert, Till; Nachman, Benjamin

    2015-02-20

    A light supersymmetric top quark partner (stop) with a mass nearly degenerate with that of the standard model (SM) top quark can evade direct searches. The precise measurement of SM top properties such as the cross-section has been suggested to give a handle for this ‘stealth stop’ scenario. We present an estimate of the potential impact a light stop may have on top quark mass measurements. The results indicate that certain light stop models may induce a bias of up to a few GeV, and that this effect can hide the shift in, and hence sensitivity from, cross-section measurements. Due to the different initial states, the size of the bias is slightly different between the LHC and the Tevatron. The studies make some simplifying assumptions for the top quark measurement technique, and are based on truth-level samples.

  3. Light emitting ceramic device

    DOEpatents

    Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

    2010-05-18

    A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

  4. Light harvesting arrays

    DOEpatents

    Lindsey, Jonathan S.

    2002-01-01

    A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  5. Radioluminescent lighting technology

    SciTech Connect

    Not Available

    1990-01-01

    The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

  6. Modeling heavy ion ionization loss in the MARS15 code

    SciTech Connect

    Rakhno, I.L.; Mokhov, N.V.; Striganov, S.I.; /Fermilab

    2005-05-01

    The needs of various accelerator and space projects stimulated recent developments to the MARS Monte Carlo code. One of the essential parts of those is heavy ion ionization energy loss. This paper describes an implementation of several corrections to dE/dx in order to take into account the deviations from the Bethe theory at low and high energies as well as the effect of a finite nuclear size at ultrarelativistic energies. Special attention is paid to the transition energy region where the onset of the effect of a finite nuclear size is observed. Comparisons with experimental data and NIST data are presented.

  7. Tutorial on nuclear thermal propulsion safety for Mars

    SciTech Connect

    Buden, D.

    1992-01-01

    Safety is the prime design requirement for nuclear thermal propulsion (NTP). It must be built in at the initiation of the design process. An understanding of safety concerns is fundamental to the development of nuclear rockets for manned missions to Mars and many other applications that will be enabled or greatly enhanced by the use of nuclear propulsion. To provide an understanding of the basic issues, a tutorial has been prepared. This tutorial covers a range of topics including safety requirements and approaches to meet these requirements, risk and safety analysis methodology, NERVA reliability and safety approach, and life cycle risk assessments.

  8. Pratt and Whitney ESCORT derivative for mars surface power

    SciTech Connect

    Feller, Gerald J.; Joyner, Russell

    1999-01-22

    The purpose of this paper is to address the applicability of a common reactor system design from the Pratt and Whitney ESCORT nuclear thermal rocket engine concept to support current NASA mars surface-based power requirements. The ESCORT is a bimodal engine capable of supporting a wide range of propulsive thermal and vehicle electrical power requirements. The ESCORT engine is powered by a fast-spectrum beryllium-reflected CERMET-fueled nuclear reactor. In addition to an expander cycle propulsive mode, the ESCORT is capable of operating in an electrical power mode. In this mode, the reactor is used to heat a mixture of helium and xenon to drive a closed-loop Brayton cycle in order to generate electrical energy. Recent Design Reference Mission requirements (DRM) from NASA Johnson Space Center and NASA Lewis Research Center studies in 1997 and 1998 have detailed upgraded requirements for potential mars transfer missions. The current NASA DRM requires a nuclear thermal propulsion system capable of delivering total mission requirements of 200170 N (45000 lbf) thrust and 50 kWe of spacecraft electrical power. Additionally, these requirements detailed a surface power system capable of providing approximately 160 kW of electrical energy over an approximate 10 year period within a given weight and volume envelope. Current NASA studies use a SP-100 reactor (0.8 MT) and a NERVA derivative (1.6 MT) as baseline systems. A mobile power cart of approximate dimensions 1.7 mx4.5 mx4.4 m has been conceptualized to transport the reactor power system on the Mars Surface. The 63.25 cm diameter and 80.25 cm height of the ESCORT and its 1.3 MT of weight fit well within the current weight and volume target range of the NASA DRM requirements. The modifications required to the ESCORT reactor system to support this upgraded electrical power requirements along with operation in the Martian atmospheric conditions are addressed in this paper. Sufficient excess reactivity and burnup capability

  9. Tutorial on nuclear thermal propulsion safety for Mars

    SciTech Connect

    Buden, D.

    1992-08-01

    Safety is the prime design requirement for nuclear thermal propulsion (NTP). It must be built in at the initiation of the design process. An understanding of safety concerns is fundamental to the development of nuclear rockets for manned missions to Mars and many other applications that will be enabled or greatly enhanced by the use of nuclear propulsion. To provide an understanding of the basic issues, a tutorial has been prepared. This tutorial covers a range of topics including safety requirements and approaches to meet these requirements, risk and safety analysis methodology, NERVA reliability and safety approach, and life cycle risk assessments.

  10. The Science Behind 'The Martian' - Staying Warm on Mars

    ScienceCinema

    Wham, Bob; Ulrich, George

    2016-07-12

    Set in the not-too-distant future, “The Martian” is the story of an astronaut stranded on Mars who has to rely on his own wit and ingenuity to survive the planet’s hostile conditions. If Mark Watney’s mission were real, Oak Ridge National Laboratory would be playing a vital role in his survival, as it would be the sole source of the Plutonium-238 needed for the RTG, as well as the fuel’s containment material in the form of iridium clad vent sets.

  11. CONNECTED LIGHTING SYSTEMS RESOURCES | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CONNECTED LIGHTING SYSTEMS RESOURCES CONNECTED LIGHTING SYSTEMS RESOURCES The following resources provide information about outdoor lighting control systems. 2014 Presentation:...

  12. Light Water Reactor Sustainability (LWRS) Program | Department...

    Energy Saver

    Nuclear Reactor Technologies Light Water Reactor Sustainability (LWRS) Program Light Water Reactor Sustainability (LWRS) Program Light Water Reactor Sustainability (LWRS) ...

  13. Light Water Reactor Sustainability Technical Documents | Department...

    Energy Saver

    Nuclear Reactor Technologies Light Water Reactor Sustainability Program Light Water Reactor Sustainability Technical Documents Light Water Reactor Sustainability Technical ...

  14. Advanced Light Extraction Material for OLED Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Light Extraction Material for OLED Lighting Advanced Light Extraction Material for OLED Lighting Lead Performer: Pixelligent Technologies LLC - Baltimore, MD Partners: OLEDWorks LLC DOE Total Funding: $1,000,000 Project Term: April 6, 2015 - April 5, 2017 Funding Opportunity: FY2015 Phase II Release 1 SBIR Awards PROJECT OBJECTIVE The primary goal of this Phase II project is to develop a viable commercial process to manufacture an internal light extraction (ILE) layer to be supplied to OLED

  15. Demonstration Assessment of Light-Emitting Diode Parking Structure Lighting

    Office of Scientific and Technical Information (OSTI)

    at U.S. Department of Labor Headquarters (Technical Report) | SciTech Connect Demonstration Assessment of Light-Emitting Diode Parking Structure Lighting at U.S. Department of Labor Headquarters Citation Details In-Document Search Title: Demonstration Assessment of Light-Emitting Diode Parking Structure Lighting at U.S. Department of Labor Headquarters This report documents a solid-state lighting (SSL) technology demonstration at the parking structure of the U.S. Department of Labor (DOL)

  16. Why Lighting Systems Need to Evolve

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Systems Need to Evolve DOE Connected Lighting Systems Meeting November 16, 2015 Lighting Controls - A Lost Opportunity 1 18% 16% 7% 2% 4% 4% Light scheduling Occupancy ...

  17. Demonstration Assessment of LED Roadway Lighting: Philadelphia...

    Office of Scientific and Technical Information (OSTI)

    LED Roadway Lighting: Philadelphia, PA Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E. Roadway Lighting; Solid-state lighting; LED lighting; SSL; LED; GATEWAY Roadway...

  18. Outdoor Solar Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Electricity & Fuel Lighting Outdoor Solar Lighting Outdoor Solar Lighting Outdoor solar lights use solar cells, which convert sunlight into electricity, and are easy to ...

  19. Lighting Principles and Terms | Department of Energy

    Energy Saver

    Principles and Terms Lighting Principles and Terms Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  20. Solid State Lighting

    SciTech Connect

    Hastbacka, Mildred; Dieckmann, John; Bouza, Antonio

    2013-03-30

    The article discusses solid state lighting technologies. This topic was covered in two previous ASHRAE Journal columns (2010). This article covers advancements in technologies and the associated efficacies. The life-cycle, energy savings and market potential of these technologies are addressed as well.

  1. Light water reactor program

    SciTech Connect

    Franks, S.M.

    1994-12-31

    The US Department of Energy`s Light Water Reactor Program is outlined. The scope of the program consists of: design certification of evolutionary plants; design, development, and design certification of simplified passive plants; first-of-a-kind engineering to achieve commercial standardization; plant lifetime improvement; and advanced reactor severe accident program. These program activities of the Office of Nuclear Energy are discussed.

  2. Advanced hybrid nuclear propulsion Mars mission performance enhancement

    SciTech Connect

    Dagle, J.E.; Noffsinger, K.E.; Segna, D.R.

    1992-02-01

    Nuclear electric propulsion (NEP), compared with chemical and nuclear thermal propulsion (NTP), can effectively deliver the same mass to Mars using much less propellant, consequently requiring less mass delivered to Earth orbit. The lower thrust of NEP requires a spiral trajectory near planetary bodies, which significantly increases the travel time. Although the total travel time is long, the portion of the flight time spent during interplanetary transfer is shorter, because the vehicle is thrusting for much longer periods of time. This has led to the supposition that NEP, although very attractive for cargo missions, is not suitable for piloted missions to Mars. However, with the application of a hybrid approach to propulsion, the benefits of NEP can be utilized while drastically reducing the overall travel time required. Development of a dual-mode system, which utilizes high-thrust NTP to propel the spacecraft from the planetary gravitational influence and low-thrust NEP to accelerate in interplanetary space, eliminates the spiral trajectory and results in a much faster transit time than could be obtained by either NEP or NTP alone. This results in a mission profile with a lower initial mass in low Earth orbit. In addition, the propulsion system would have the capability to provide electrical power for mission applications.

  3. Mars mission performance enhancement with hybrid nuclear propulsion

    SciTech Connect

    Dagle, J.E.; Noffsinger, K.E.; Segna, D.R.

    1992-01-01

    Nuclear electric propulsion (NEP), compared with chemical and nuclear thermal propulsion (NTP), can effectively deliver the same mass to Mars using much less propellant, consequently requiring less mass delivered to Earth orbit. The lower thrust of NEP requires a spiral trajectory near planetary bodies, which significantly increases the travel time. Although the total travel time is long, the portion of the flight time spent during interplanetary transfer is shorter, because the vehicle is thrusting for much longer periods of time. This has led to the supposition that NEP, although very attractive for cargo missions, is not suitable for piloted missions to Mars. However, with the application of a hybrid application of a hybrid approach to propulsion, the benefits of NEP can be utilized while drastically reducing the overall travel time required. Development of a dual-mode system, which utilizes high-thrust NTP to propel the spacecraft from the planetary gravitational influence and low-thrust NEP to accelerate in interplanetary space, eliminates the spiral trajectory and results in a much faster transit time than could be obtained by either NEP or NTP alone. This results in a mission profile with a lower initial mass in low Earth orbit. In addition, the propulsion system would have the capability to provide electrical power for mission applications.

  4. Nuclear rockets: High-performance propulsion for Mars

    SciTech Connect

    Watson, C.W.

    1994-05-01

    A new impetus to manned Mars exploration was introduced by President Bush in his Space Exploration Initiative. This has led, in turn, to a renewed interest in high-thrust nuclear thermal rocket propulsion (NTP). The purpose of this report is to give a brief tutorial introduction to NTP and provide a basic understanding of some of the technical issues in the realization of an operational NTP engine. Fundamental physical principles are outlined from which a variety of qualitative advantages of NTP over chemical propulsion systems derive, and quantitative performance comparisons are presented for illustrative Mars missions. Key technologies are described for a representative solid-core heat-exchanger class of engine, based on the extensive development work in the Rover and NERVA nuclear rocket programs (1955 to 1973). The most driving technology, fuel development, is discussed in some detail for these systems. Essential highlights are presented for the 19 full-scale reactor and engine tests performed in these programs. On the basis of these tests, the practicality of graphite-based nuclear rocket engines was established. Finally, several higher-performance advanced concepts are discussed. These have received considerable attention, but have not, as yet, developed enough credibility to receive large-scale development.

  5. Radiation shield analysis for a manned Mars rover

    SciTech Connect

    Morley, N.J.; ElGenk, M.S. )

    1991-01-01

    Radiation shielding for unmanned space missions has been extensively studied; however, designs of man-rated shields are minimal. Engle et al.'s analysis of a man-rated, multilayered shield composed of two and three cycles (a cycle consists of a tungsten and a lithium hydride layer) is the basis for the work reported in this paper. The authors present the results of a recent study of shield designs for a manned Mars rover powered by a 500-kW(thermal) nuclear reactor. A train-type rover vehicle was developed, which consists of four cars and is powered by an SP-100-type nuclear reactor heat source. The maximum permissible dose rate (MPD) from all sources is given by the National Council on Radiation Protection and Measurements as 500 mSv/yr (50 rem/yr) A 3-yr Mars mission (2-yr round trip and 1-yr stay) will deliver a 1-Sv natural radiation dose without a solar particle event, 450 mSv/yr in flight, and an additional 100 mSv on the planet surface. An anomalously large solar particle event could increase the natural radiation dose for unshielded astronauts on the Martian surface to 200 mSv. This limits the MPD to crew members from the nuclear reactor to 300 mSv.

  6. Nuclear powered Mars cargo transport mission utilizing advanced ion propulsion

    SciTech Connect

    Galecki, D.L.; Patterson, M.J.

    1987-01-01

    Nuclear-powered ion propulsion technology was combined with detailed trajectory analysis to determine propulsion system and trajectory options for an unmanned cargo mission to Mars in support of manned Mars missions. A total of 96 mission scenarios were identified by combining two power levels, two propellants, four values of specific impulse per propellant, three starting altitudes, and two starting velocities. Sixty of these scenarios were selected for a detailed trajectory analysis; a complete propulsion system study was then conducted for 20 of these trajectories. Trip times ranged from 344 days for a xenon propulsion system operating at 300 kW total power and starting from lunar orbit with escape velocity, to 770 days for an argon propulsion system operating at 300 kW total power and starting from nuclear start orbit with circular velocity. Trip times for the 3 MW cases studied ranged from 356 to 413 days. Payload masses ranged from 5700 to 12,300 kg for the 300 kW power level, and from 72,200 to 81,500 kg for the 3 MW power level.

  7. Diagenesis and clay mineral formation at Gale Crater, Mars

    DOE PAGES [OSTI]

    Bridges, J. C.; Schwenzer, S. P.; Leveille, R.; Westall, F.; Wiens, R. C.; Mangold, N.; Bristow, T.; Edwards, P.; Berger, G.

    2015-01-18

    The Mars Science Laboratory rover Curiosity found host rocks of basaltic composition and alteration assemblages containing clay minerals at Yellowknife Bay, Gale Crater. On the basis of the observed host rock and alteration minerals, we present results of equilibrium thermochemical modeling of the Sheepbed mudstones of Yellowknife Bay in order to constrain the formation conditions of its secondary mineral assemblage. Building on conclusions from sedimentary observations by the Mars Science Laboratory team, we assume diagenetic, in situ alteration. The modeling shows that the mineral assemblage formed by the reaction of a CO₂-poor and oxidizing, dilute aqueous solution (Gale Portage Water)more » in an open system with the Fe-rich basaltic-composition sedimentary rocks at 10–50°C and water/rock ratio (mass of rock reacted with the starting fluid) of 100–1000, pH of ~7.5–12. Model alteration assemblages predominantly contain phyllosilicates (Fe-smectite, chlorite), the bulk composition of a mixture of which is close to that of saponite inferred from Chemistry and Mineralogy data and to that of saponite observed in the nakhlite Martian meteorites and terrestrial analogues. To match the observed clay mineral chemistry, inhomogeneous dissolution dominated by the amorphous phase and olivine is required. We therefore deduce a dissolving composition of approximately 70% amorphous material, with 20% olivine, and 10% whole rock component.« less

  8. Sediment volume in the north polar sand seas of Mars

    SciTech Connect

    Lancaster, N.; Greeley, R. (Arizona State Univ., Tempe (USA))

    1990-07-10

    Data from studies of the cross-sectional area of terrestrial transverse dunes have been combined with maps of dune morphometry derived from Viking orbiter images to generate new estimates of sediment thickness and dune sediment volume in the north polar sand seas of Mars. A relationship between dune spacing and equivalent sediment thickness (EST) was developed from field data on Namibian and North American dunes and was applied to data on dune spacing and dune cover measured on Viking orbiter images to generate maps of dune sediment thickness for Martian north polar sand seas. There are four major sand seas in the north polar region of Mars, covering an area of 6.8 x 10{sup 5} km{sup 2}. Equivalent sediment thickness ranges between 0.5 and 6.1 m with a mean of 1.8 m. The sand seas contain a total of 1158 km{sup 3} of dune sediment, which may have been derived by erosion of polar layered deposits and concentrated in its present location by winds that change direction seasonally.

  9. Fluorescent Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Electricity & Fuel » Lighting » Fluorescent Lighting Fluorescent Lighting Fluorescent Lighting Fluorescent lamps use 25%-35% of the energy used by incandescent products to provide a similar amount of light. They also last about 10 times longer (7,000-24,000 hours). The two general types of fluorescent lamps are: Compact fluorescent lamps (CFLs) -- commonly found with integral ballasts and screw bases, these are popular lamps often used in household fixtures Fluorescent tube and circline

  10. Scattering Of Light Nuclei

    SciTech Connect

    Quaglioni, S; Navratil, P; Roth, R

    2009-12-15

    The exact treatment of nuclei starting from the constituent nucleons and the fundamental interactions among them has been a long-standing goal in nuclear physics. Above all nuclear scattering and reactions, which require the solution of the many-body quantum-mechanical problem in the continuum, represent an extraordinary theoretical as well as computational challenge for ab initio approaches.We present a new ab initio many-body approach which derives from the combination of the ab initio no-core shell model with the resonating-group method [4]. By complementing a microscopic cluster technique with the use of realistic interactions, and a microscopic and consistent description of the nucleon clusters, this approach is capable of describing simultaneously both bound and scattering states in light nuclei. We will discuss applications to neutron and proton scattering on sand light p-shell nuclei using realistic nucleon-nucleon potentials, and outline the progress toward the treatment of more complex reactions.

  11. Fusion pumped light source

    DOEpatents

    Pappas, Daniel S.

    1989-01-01

    Apparatus is provided for generating energy in the form of light radiation. A fusion reactor is provided for generating a long, or continuous, pulse of high-energy neutrons. The neutron flux is coupled directly with the lasing medium. The lasing medium includes a first component selected from Group O of the periodic table of the elements and having a high inelastic scattering cross section. Gamma radiation from the inelastic scattering reactions interacts with the first component to excite the first component, which decays by photon emission at a first output wavelength. The first output wavelength may be shifted to a second output wavelength using a second liquid component responsive to the first output wavelength. The light outputs may be converted to a coherent laser output by incorporating conventional optics adjacent the laser medium.

  12. Materials processing with light

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Materials processing with light, plasmas and other sources of energy At the ARC various processing technologies are used to create materials, struc- tures, and devices that play an increasingly important role in high value-added manufacturing of computer and communications equipment, physical and chemical sensors, biomedical instruments and treatments, semiconductors, thin films, photovoltaics, electronic components and optical components. For example, making coatings, including paint, chrome,

  13. Transformations in Lighting: The Ninth Annual Solid-State Lighting...

    Energy Saver

    to participate in DOE's "Transformations in Lighting" Solid-State Lighting (SSL) R&D Workshop. DOE SSL Portfolio Manager James Brodrick kicked off Day 1 by observing that although ...

  14. Making fuel from light: Argonne research sheds light on photosynthesis...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Making fuel from light: Argonne research sheds light on photosynthesis and creation of solar fuel By Jo Napolitano * September 1, 2015 Tweet EmailPrint Refined by nature over a ...

  15. Reading Municipal Light Department- Commercial Lighting Retrofit Program

    Energy.gov [DOE]

    Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy-efficient lighting and sensors in existing facilities. Rebates are limited to $20,000 per...

  16. U.S. Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... due largely to new production of light, sweet crude from unconventional tight- oil ... This is especially problematic for takeaway of light sweet crude from North Dakota and ...

  17. Lighting the Way with Compact Fluorescent Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    with Compact Fluorescent Lighting Lighting the Way with Compact Fluorescent Lighting April 28, 2009 - 5:00am Addthis John Lippert There is a major push today to get homeowners to adopt compact fluorescent lamp (CFL) light bulbs. They have been on the market for nearly three decades, and many homeowners still do not use them widely. But the tide is definitely turning. Their availability and the percentage of homeowners familiar with the technology and purchasing them for their homes have been

  18. Detroit Street Lighting Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Detroit Street Lighting Report Detroit Street Lighting Report 2015_restoring-detroit.pdf (929.98 KB) More Documents & Publications LED Roadway Lighting OCTOBER 2015 POSTINGS Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report

  19. Propulsive options for a manned Mars transportation system

    SciTech Connect

    Braun, R.D.; Blersch, D.J.

    1989-01-01

    In this investigation, five potential manned Mars transportation systems are compared. These options include: (1) a single vehicle, chemically propelled (CHEM) option, (2) a single vehicle, nuclear thermal propulsion (NTP) option, (3) a single vehicle solar electric propulsion (SEP) option, (4) a single vehicle hybrid nuclear electric propulsion (NEP)/CHEM option, and (5) a dual vehicle option (NEP cargo spacecraft and CHEM manned vehicle). In addition to utilizing the initial vehicle weight in low-earth orbit as a measure of mission feasibility, this study addresses the major technological barriers each propulsive scenario must surpass. It is shown that instead of a single clearly superior propulsion system, each means of propulsion may be favored depending upon the specified program policy and the extent of the desired manned flight time. Furthermore, the effect which aerobraking and multiple transfer cycles have upon mission feasibility is considered. 18 refs.

  20. Another Side of Light - C

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Einstein found that light waves in a furnace should act much the same if they behave ... light (Figure 3) is quite different, and it's here that Einstein focused his attention. ...

  1. LED Lighting | Department of Energy

    Office of Environmental Management (EM)

    comparable or better light quality than other types of lighting. Check out the top 8 things you didn't know about LEDs to learn more. Energy Savings LED is a highly energy...

  2. Solar lighting | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    only need to place the lights in a sunny location. Others have the lights separate from a solar cell panel. Only the panel needs to be placed in a sunny location. Units vary in...

  3. OSTIblog Articles in the Linac Coherent Light Source Topic | OSTI, US Dept

    Office of Scientific and Technical Information (OSTI)

    of Energy Office of Scientific and Technical Information Linac Coherent Light Source Topic Free-Electron Lasers move discovery into warp speed by Kathy Chambers 26 Mar, 2013 in Products and Content 5445 121212-cosmic-chandra_caption.jpg Free-Electron Lasers move discovery into warp speed Read more about 5445 Scientific research being performed today using free-electron lasers could be fodder for the next James Bond or Star Wars movie but it is way better than science fiction and it is real.

  4. Manned Mars Missions. Working group papers, volume 1, section 1-4

    SciTech Connect

    Duke, M.B.; Keaton, P.W.

    1986-05-01

    The papers presented by the working group on Manned Mars Missions are given. The purpose is to update earlier Mars missions study data, to examine the impact of new and emerging technologies on Mars mission capabilities, and to identify technological issues that would be useful in projecting scientific and engineering research in the coming decades. The papers are grouped into nine sections, which are: (1) rationale; (2) transportation trades and issues; (3) mission and configuration concepts; (4) surface infrastructure; (5) science investigations and issues; (6) life science/medical issues; (7) subsystems and technology development requirements; (8) political and economic issues; and (9) impact on other programs.

  5. Calibrating the ChemCam LIBS for carbonate minerals on Mars

    SciTech Connect

    Wiens, Roger C; Clegg, Samuel M; Ollila, Ann M; Barefield, James E; Lanza, Nina; Newsom, Horton E

    2009-01-01

    The ChemCam instrument suite on board the NASA Mars Science Laboratory (MSL) rover includes the first LIBS instrument for extraterrestrial applications. Here we examine carbonate minerals in a simulated martian environment using the LIDS technique in order to better understand the in situ signature of these materials on Mars. Both chemical composition and rock type are determined using multivariate analysis (MVA) techniques. Composition is confirmed using scanning electron microscopy (SEM) techniques. Our initial results suggest that ChemCam can recognize and differentiate between carbonate materials on Mars.

  6. Quick Fix Gives Mars Rover's ChemCam Sharper Vision | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Quick Fix Gives Mars Rover's ChemCam Sharper Vision Quick Fix Gives Mars Rover's ChemCam Sharper Vision June 12, 2015 - 3:08pm Addthis This self-portrait of NASA's Curiosity Mars rover shows the vehicle at the "Mojave" site on Mount Sharp, combining dozens of images taken in January 2015. The circle visible at the top of the rover's mast is part of the ChemCam instrument developed in part by Los Alamos National Laboratory. | Photo courtesy of NASA/JPL-Caltech/MSSS This

  7. ChemCam findings hint at oxygen-rich past on Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ChemCam findings hint at oxygen-rich past on Mars ChemCam findings hint at oxygen-rich past on Mars The discovery of manganese oxides in Martian rocks might tell us that the Red Planet was once more Earth-like than previously believed. June 27, 2016 The Curiosity rover examines the Kimberley formation in Gale crater, Mars. In front of the rover are two holes from the rover's sample-collection drill and several dark-toned features that have been cleared of dust (see inset images). These flat

  8. Photodetector with enhanced light absorption

    DOEpatents

    Kane, James

    1985-01-01

    A photodetector including a light transmissive electrically conducting layer having a textured surface with a semiconductor body thereon. This layer traps incident light thereby enhancing the absorption of light by the semiconductor body. A photodetector comprising a textured light transmissive electrically conducting layer of SnO.sub.2 and a body of hydrogenated amorphous silicon has a conversion efficiency about fifty percent greater than that of comparative cells. The invention also includes a method of fabricating the photodetector of the invention.

  9. Pedestrian Friendly Outdoor Lighting

    SciTech Connect

    Miller, Naomi J.; Koltai, Rita; McGowan, Terry

    2013-12-31

    This GATEWAY report discusses the problems of pedestrian lighting that occur with all technologies with a focus on the unique optical options and opportunities offered by LEDs through the findings from two pedestrian-focused projects, one at Stanford University in California, and one at the Chautauqua Institution in upstate New York. Incorporating user feedback this report reviews the tradeoffs that must be weighed among visual comfort, color, visibility, efficacy and other factors to stimulate discussion among specifiers, users, energy specialists, and in industry in hopes that new approaches, metrics, and standards can be developed to support pedestrian-focused communities, while reducing energy use.

  10. Coherent white light amplification

    DOEpatents

    Jovanovic, Igor; Barty, Christopher P.

    2004-05-25

    A system for coherent simultaneous amplification of a broad spectral range of light that includes an optical parametric amplifier and a source of a seed pulse is described. A first angular dispersive element is operatively connected to the source of a seed pulse. A first imaging telescope is operatively connected to the first angular dispersive element and operatively connected to the optical parametric amplifier. A source of a pump pulse is operatively connected to the optical parametric amplifier. A second imaging telescope is operatively connected to the optical parametric amplifier and a second angular dispersive element is operatively connected to the second imaging telescope.

  11. Microsoft Word - DSQ Winter 2010_15mar10.doc

    National Nuclear Security Administration (NNSA)

    ... types of targets are designed with the latest 3-D Advanced Simulation and Computing code. ... David Ceperley on the study of light elements at high pressures using Quantum Monte Carlo ...

  12. Emerging Lighting Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Emerging Lighting Technology Emerging Lighting Technology Presentation covers emergying light technologies and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting. Download the Emerging Lighting Technology presentation. (1.14 MB) More Documents & Publications Solid-State Lighting Federal Technology Deployment Pilot: Exterior Solid State Lighting Solid State Lighting: GATEWAY and CALiPER

  13. Oxidation of manganese in an ancient aquifer, Kimberley formation, Gale crater, Mars

    DOE PAGES [OSTI]

    Lanza, Nina L.; Wiens, Roger C.; Arvidson, Raymond E.; Clark, Benton C.; Fischer, Woodward W.; Gellert, Ralf; Grotzinger, John P.; Hurowitz, Joel A.; McLennan, Scott M.; Morris, Richard V.; et al

    2016-07-18

    We report that the Curiosity rover observed high Mn abundances (>25 wt % MnO) in fracture-filling materials that crosscut sandstones in the Kimberley region of Gale crater, Mars. The correlation between Mn and trace metal abundances plus the lack of correlation between Mn and elements such as S, Cl, and C, reveals that these deposits are Mn oxides rather than evaporites or other salts. On Earth, environments that concentrate Mn and deposit Mn minerals require water and highly oxidizing conditions; hence, these findings suggest that similar processes occurred on Mars. In conclusion, based on the strong association between Mn-oxide depositionmore » and evolving atmospheric dioxygen levels on Earth, the presence of these Mn phases on Mars suggests that there was more abundant molecular oxygen within the atmosphere and some groundwaters of ancient Mars than in the present day.« less

  14. A STUDY OF DUST AND GAS AT MARS FROM COMET C/2013 A1 (SIDING SPRING)

    SciTech Connect

    Kelley, Michael S. P.; Farnham, Tony L.; Bodewits, Dennis; Tricarico, Pasquale; Farnocchia, Davide

    2014-09-01

    Although the nucleus of comet C/2013 A1 (Siding Spring) will safely pass Mars in 2014 October, the dust in the coma and tail will more closely approach the planet. Using a dynamical model of comet dust, we estimate the impact fluence. Based on our nominal model no impacts are expected at Mars. Relaxing our nominal model's parameters, the fluence is no greater than ∼10{sup –7} grains m{sup –2} for grain radii larger than 10 μm. Mars-orbiting spacecraft are unlikely to be impacted by large dust grains, but Mars may receive as many as ∼10{sup 7} grains, or ∼100 kg of total dust. We also estimate the flux of impacting gas molecules commonly observed in comet comae.

  15. MHK ISDB/Instruments/AirMar G2183 GPS Antenna | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    AirMar G2183 GPS Antenna < MHK ISDB Jump to: navigation, search MHK Instrumentation & Sensor Database Menu Home Search Add Instrument Add Sensor Add Company Community FAQ Help...

  16. OSTIblog Articles in the Mars Topic | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    Data obtained from Chemcam is helping to answer the question of about life on Mars. Visit DOE's ScienceCinema to catch Roger's excitement along with a team of 40 people at the Los ...

  17. Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Planning & Budget StrategyFRA Agenda (IPPM) (5+ Yrs) Leadership Workshop Agenda Working Draft Leadership Workshop...

  18. Curiosity Rover confirms existence of a large ancient lake on Mars

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Curiosity Rover confirms existence of a large ancient lake on Mars Curiosity Rover confirms existence of a large ancient lake on Mars New findings released today in the journal Science show substantial bodies of water likely existed on the surface of the planet in its early history. October 8, 2015 The DOE Secretary's Achievement Award is presented to the RLUOB Transfer Team. Top (from left): David Gallimore, Brett Cederdahl, Mike Parkes, Tim Leckbee and Tim Nelson. Bottom (from left): Denise

  19. Detroit Public Lighting Department - Commercial and Industrial...

    Energy.gov [DOE] (indexed site)

    PublicLightingEnergyWis... Expiration Date 11302012 State Michigan Program Type Rebate Program Rebate Amount Light Fixtures: 2-130 Lighting Controls: 0.10-65...

  20. Considerations When Comparing LED and Conventional Lighting ...

    Energy.gov [DOE] (indexed site)

    When comparing LED lighting performance to conventional lighting, buyers will want to consider energy efficiency, operating life and lumen depreciation, light outputdistribution, ...

  1. How Do You Light Your Home Efficiently?

    Energy.gov [DOE]

    An average household dedicates 11% of its energy budget to lighting. Installing efficient lighting technologies, using task lighting, flipping the switch, and taking advantage of natural daylight...

  2. Light at Night and Human Health

    SciTech Connect

    2010-01-01

    Solid-state lighting program technology fact sheet that discusses potential health implications of light at night (LAN) exposure and how it may affect lighting practice and design.

  3. Covered Product Category: Light Fixtures (Luminaires) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... luminaires (troffers) Portable desk lamps Industrial (high bay) luminaires Accent lights, including line-voltage track lighting Exterior lighting Reducing Energy Costs ...

  4. Lighting Control Types | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Control Types Lighting Control Types Characteristics of the most common lighting controls for offices and other public buildings are outlined below. Also provided is a ...

  5. Lighting Principles and Terms | Department of Energy

    Energy.gov [DOE] (indexed site)

    Light quantity, energy consumption, and light quality are the basic principles of lighting. | Photo courtesy of

  6. Advanced Lighting Systems | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Minnesota Zip: 56378 Product: Advanced Lighting Systems (ALS) provides a number of LED and fiber optic lighting solutions. It was acquired by Nexxus Lighting in September...

  7. Silescent Lighting Corp | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lighting Corp Place: Fort Lauderdale, Florida Zip: 33315 Product: Florida-based LED lighting fixtures maker. References: Silescent Lighting Corp1 This article is a stub....

  8. Philips Lumileds Lighting Co | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    of high-power LEDs and solid-state lighting solutions for automotive lighting, computer displays, LCD televisions, signs and signaling and architectural lighting....

  9. Universal Lighting Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lighting Technologies Jump to: navigation, search Name: Universal Lighting Technologies Place: Nashville, Tennessee Zip: 37214-3683 Product: Universal Lighting Technologies...

  10. Hull Municipal Light Plant | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hull Municipal Light Plant Jump to: navigation, search Logo: Hull Municipal Light Plant Name: Hull Municipal Light Plant Place: Massachusetts Phone Number: 781-925-0051 Website:...

  11. Lighting Principles and Terms | Department of Energy

    Office of Environmental Management (EM)

    by lumens, not watts. To choose the best energy-efficient lighting options for your home, you should understand basic lighting principles and terms. Light Quantity...

  12. Light Water Reactor Sustainability Program - Integrated Program...

    Energy Saver

    Light Water Reactor Sustainability Program - Integrated Program Plan Light Water Reactor Sustainability Program - Integrated Program Plan The Light Water Reactor Sustainability ...

  13. Light modulating device

    DOEpatents

    Rauh, R. David; Goldner, Ronald B.

    1989-01-01

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  14. Directed light fabrication

    SciTech Connect

    Lewis, G.K.; Nemec, R.; Milewski, J.; Thoma, D.J.; Cremers, D.; Barbe, M.

    1994-09-01

    Directed Light Fabrication (DLF) is a rapid prototyping process being developed at Los Alamos National Laboratory to fabricate metal components. This is done by fusing gas delivered metal powder particles in the focal zone of a laser beam that is, programmed to move along or across the part cross section. Fully dense metal is built up a layer at a time to form the desired part represented by a 3 dimensional solid model from CAD software. Machine ``tool paths`` are created from the solid model that command the movement and processing parameters specific to the DLF process so that the part can be built one layer at a time. The result is a fully dense, near net shape metal part that solidifies under rapid solidification conditions.

  15. Light modulating device

    DOEpatents

    Rauh, R.D.; Goldner, R.B.

    1989-12-26

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  16. Manned mars mission enhancements using Pratt and Whitney escort combined propulsion and power system

    SciTech Connect

    Joyner, Russell; Feller, Gerald J.

    1999-01-22

    The purpose of this paper is to describe the cost implications to manned Mars missions when a nuclear thermal combined propulsion and power unit is used for main propulsion and mission power. The paper uses a series of mission opportunities during the NASA DRM focus period and looks at how a NTR (Nuclear Thermal Rocket) can be used to increase the Mars mission payload delivery capability and mission flexibility across the entire mission spectrum. In propulsive mode, a nuclear reactor is used to heat hot hydrogen, which is expanded through a converging/diverging nozzle to generate thrust. Heat pickup in the nozzle and the radial beryllium reflectors is used to drive the turbomachinery in the ESCORT expander cycle. In electrical mode, the reactor is used to heat a mixture of helium and xenon to drive a closed-loop Brayton cycle in order to generate electrical energy. A Mars transportation system integrated performance methodology was developed to assess the sensitivity to weight, thrust and impulse to the Mars conjunction class mission requirements. Propellant tanks, propulsion system mass, shielding, and Brayton cycle power conversion unit requirements were included in this evaluation. This paper examines how the design characteristics of the ESCORT derivative propulsion and power system affect the mission payload capability and the earth launch vehicle design requirements. The same reactor design is also used for Mars surface power reactor, delivered as payload by the ESCORT derivative powered Mars transfer stage. Trade curves of mission mass and payload are presented.

  17. A Flow-Channel Analysis for the Mars Hopper

    SciTech Connect

    W. Spencer Cooley

    2013-02-01

    The Mars Hopper is an exploratory vehicle designed to fly on Mars using carbon dioxide from the Martian atmosphere as a rocket propellant. The propellent gasses are thermally heated while traversing a radioisotope ther- mal rocket (RTR) engine’s core. This core is comprised of a radioisotope surrounded by a heat capacitive material interspersed with tubes for the propellant to travel through. These tubes, or flow channels, can be manu- factured in various cross-sectional shapes such as a special four-point star or the traditional circle. Analytical heat transfer and computational fluid dynamics (CFD) anal- yses were performed using flow channels with either a circle or a star cross- sectional shape. The nominal total inlet pressure was specified at 2,805,000 Pa; and the outlet pressure was set to 2,785,000 Pa. The CO2 inlet tem- perature was 300 K; and the channel wall was 1200 K. The steady-state CFD simulations computed the smooth-walled star shape’s outlet temper- ature to be 959 K on the finest mesh. The smooth-walled circle’s outlet temperature was 902 K. A circle with a surface roughness specification at 0.01 mm gave 946 K and at 0.1 mm yielded 989 K. The The effects of a slightly varied inlet pressure were also examined. The analytical calculations were based on the mass flow rates computed in the CFD simulations and provided significantly higher outlet temperature results while displaying the same comparison trends. Research relating to the flow channel heat transfer studies was also done. Mathematical methods to geometrically match the cross-sectional areas of the circle and star, along with a square and equilateral triangle, were derived. A Wolfram Mathematica 8 module was programmed to analyze CFD results using Richardson Extrapolation and calculate the grid convergence index (GCI). A Mathematica notebook, also composed, computes and graphs the bulk mean temperature along a flow channel’s length while the user dynam- ically provides the input

  18. Solar optics: light as energy; energy as light

    SciTech Connect

    Bennett, D.J.; Eijadi, D.A.

    1980-05-01

    a prominent characteristic of earth-sheltered and underground buildings, as well as buildings designed to accommodate more uses within the same perimeters, is the prominence of interior space without direct access to natural light and view opportunities. Solar Optics, a technique for illuminating interior spaces with natural light, offers a way to satisfy the well-documented human affinity for natural light. The system, which uses a heliostat to track the sun and lenses and mirrors to direct the light to remote interior spaces, is more efficient than converting solar radiation into electricity. Through the use of cold mirrors, it is also possible to separate the infrared portion of the spectrum from visible light, thereby creating a cool light source that can reduce a building's space cooling demand. Solar Optics also offers energy savings by transmitting light through a small aperture, as opposed to a large window. Several design problems must still be addressed. The system will be demonstrated in a new building at the University of Minnesota. Because this is a limited demonstration, it does not include the integration of a natural light system with a central source light system...another promising application of Solar Optics.

  19. LED Lighting Facts/CALiPER Snapshot. Outdoor Ambient Lighting

    SciTech Connect

    2013-07-01

    Snapshot reports reveal how today's products really perform, drawing on analysis of verified performance data from the LED Lighting Facts program's online product list.

  20. Effective White Light Options for Parking Area Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    While both providing white light, LED (foreground) provides improved uniformity and energy efficiency compared to induction (background upper right) but at a higher installed cost. ...

  1. Lighting Designer Roundtable on Solid-State Lighting | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    solid-state lighting (SSL) market and technology issues and encouraging a discussion of designers' experiences, ideas, and recommendations regarding SSL & SSL industry. ...

  2. (Lighting and) Solid-State Lighting: Science, Technology, Economic...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Applications National Solar Thermal Test Facility ... Facilities Atmospheric Radiation Measurement Climate ... Topics cover the basics of light-emitting diode (LED) ...

  3. Radioluminescent lighting for Alaskan runway lighting and marking

    SciTech Connect

    Jensen, G.A.; Leonard, L.E.

    1985-03-01

    Alaska and other far northern areas have special logistical, environmental, and economic problems that make radioluminescent (RL) lighting applications, especially in the area of airport lighting, an attractive alternative to electrical systems and flare pots. Tests and demonstrations of prototype systems conducted in Alaska over the past two years have proved the basic technological worth of RL airport lighting systems for civilian and military use. If regulatory issues and other factors identified during these tests can be favorably resolved and if the system and its components can be refined through production engineering, attractive applications for RL airfield lighting systems in Alaska and other remote locations could result.

  4. DOE Science Showcase - Light-emitting Diode (LED) Lighting Research...

    Office of Scientific and Technical Information (OSTI)

    William Watson's latest white paper In the OSTI collections: Light-emitting Diodes (LEDs). Related Links of Interest DOE Office of Energy Efficiently & Renewable Energy, Building ...

  5. Automatic Mechetronic Wheel Light Device

    DOEpatents

    Khan, Mohammed John Fitzgerald

    2004-09-14

    A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

  6. WET MARS: plentiful, readily-available martian water and its implications

    SciTech Connect

    Hyde, R; Ishikawa, M; Nuckolls, J; Whitehead, J; Wood, L

    1999-08-12

    Water and its major constituent, oxygen, in large specific quantities are essential for maintenance of human life. Providing them in adequate quantities is widely believed to be a major challenge for human Mars exploration and settlement. The Martian regolith isn't known to bear either water or hydrogen, the ice-rich Martian polar regions are thermally inhospitable, and the measured water content of Mars' thin atmosphere represents a layer of liquid water of average thickness only about 1% that of the Moon: {approximately}0.001 cm. Crucially, however, the atmospheric Martian water inventory is advected to everyplace on Mars by meteorological phenomena, so that the few cubic kilometers of liquid water-equivalent in the atmosphere are available most anywhere when, merely for the effort of condensing it. Well-engineered apparatus deployed essentially anywhere on Mars can condense water from the atmosphere in daily quantities not much smaller than its own mass, rejecting into space from radiators deployed over the local terrain the water's heat-of-condensation and the heat from non-ideality of the equipment's operation. Thus, an optimized, photovoltaically-powered 0.3 ton water-condensing system could strip 40 tons of water each year from {approximately}10{sup 4} times this mass of thin, dry Martian air. Given a 480 set I{sub sp} of H{sub 2}-O{sub 2} propulsion systems exhausting into the 6 millibar Mars-surface atmosphere and the 5.0 km/s Martian gravity well, {ge}40 tons of water two-thirds converted into 5:1 O{sub 2}/H{sub 2} cryogenic fuel could support exploration and loft a crew-of-four and their 8-ton ascent vehicle into Earth-return trajectory. The remaining water and excess oxygen would suffice for half-open-cycle life support for a year's stay on Mars. A Mars Expedition thus needs to land only explorers, dehydrated food, habitation gear and unfueled exploration I Earth-return equipment - and a water/oxygen/fuel plant with embedded power supply which operates

  7. EECBG Success Story: Lighting Retrofit Improving Visibility,...

    Energy.gov [DOE] (indexed site)

    New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium ... New LED lighting fixtures (right) emit a whiter light than existing high-pressure sodium ...

  8. LED Lighting Facts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research & Development Technology Application R&D LED Lighting Facts LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts program ...

  9. What's Next for Solid-State Lighting?

    Energy Saver

    Photo courtesy of GE Lighting What's Next for Solid-State Lighting? A s we stand on the brink of a lighting revolution spearheaded by light-emitting diode (LED) technology, one ...

  10. Radiological Contingency Planning for the Mars Science Laboratory Launch

    SciTech Connect

    Paul Guss, Robert Augdahl, Bill Nickels, Cassandra Zellers

    2008-04-16

    This paper describes the contingency planning for the launch of the Mars Science Laboratory scheduled for the 21-day window beginning on September 15, 2009. National Security Technologies, LLC (NSTec), based in Las Vegas, Nevada, will support the U.S. Department of Energy (DOE) in its role for managing the overall radiological contingency planning support effort. This paper will focus on new technologies that NSTec’s Remote Sensing Laboratory (RSL) is developing to enhance the overall response capability that would be required for a highly unlikely anomaly. This paper presents recent advances in collecting and collating data transmitted from deployed teams and sensors. RSL is responsible to prepare the contingency planning for a range of areas from monitoring and assessment, sample collection and control, contaminated material release criteria, data management, reporting, recording, and even communications. The tools RSL has available to support these efforts will be reported. The data platform RSL will provide shall also be compatible with integration of assets and field data acquired with other DOE, National Aeronautics and Space Administration, state, and local resources, personnel, and equipment. This paper also outlines the organizational structure for response elements in radiological contingency planning.

  11. Radiological Contingency Planning for the Mars Science Laboratory Launch

    SciTech Connect

    Paul P. Guss

    2008-04-01

    This paper describes the contingency planning for the launch of the Mars Science Laboratory scheduled for the 21-day window beginning on September 15, 2009. National Security Technologies, LLC (NSTec), based in Las Vegas, Nevada, will support the U.S. Department of Energy (DOE) in its role for managing the overall radiological contingency planning support effort. This paper will focus on new technologies that NSTec’s Remote Sensing Laboratory (RSL) is developing to enhance the overall response capability that would be required for a highly unlikely anomaly. This paper presents recent advances in collecting and collating data transmitted from deployed teams and sensors. RSL is responsible to prepare the contingency planning for a range of areas from monitoring and assessment, sample collection and control, contaminated material release criteria, data management, reporting, recording, and even communications. The tools RSL has available to support these efforts will be reported. The data platform RSL will provide shall also be compatible with integration of assets and field data acquired with other DOE, National Space and Aeronautics and Space Administration (NASA), state, and local resources, personnel, and equipment. This paper also outlines the organizational structure for response elements in radiological contingency planning.

  12. Vehicle configuration options using nuclear propulsion for Mars missions

    SciTech Connect

    Emrich, W.J. Jr. )

    1993-01-20

    The solid core nuclear thermal rocket (NTR) provides an attractive means of providing the propulsive force needed to accomplish a wide array of space missions. With its factor of two or more advantage in Isp over chemical engines, nuclear propulsion provides the opportunity to accomplish space missions which are impractical by other means. This paper focuses on the use of a nuclear thermal rocket to accomplish a variety of space missions with emphasis on the manned Mars mission. The particle bed reactor (PBR) type nuclear engine was chosen as the baseline engine used to conduct the present study because of its perceived versatility over other nuclear propulsion systems in conducting a wide variety of tasks. This study baselines a particle bed reactor engine with an engine thrust-to-weight ratio ([similar to]11.5) and a specific impulse of [similar to]950 s. It is shown that a PBR engine of this type will offer distinct advantages over the larger and heavier NERVA type nuclear engines.

  13. PbTe/TAGS RTG Mars Environmental Survey (MESUR) mission

    SciTech Connect

    Schock, A. )

    1993-01-10

    The paper describes the results of studies on an RTG option for powering the global network of unmanned landers for NASA's Mars Environmental Survey (MESUR) mission. RTGs are essentially unaffected by diurnal and seasonal variations, Martian sandstorms, and landing site latitudes, and their waste heat can stabilize the temperatures of the landers and their payload. The RTG designs described in this paper are based on PbTe/TAGS thermoelectric elements, in contast to the SiGe-based RTGs the author described in previous publications. The presently described RTGs differ not only in the choice of thermoelectric materials but also in the use of much lower operating temperatures, conductive rather than radiative heat transfer, an inert cover gas instead of vacuum in the RTG's converter, and fibrous instead of multifoil thermal insulation. As in a previous Teledyne design, the Fairchild designs described in this paper employ flight-proven General Purpose Source modules and Close-Pack Arrays of thermoelectric converter modules. Illustrative point designs of RTGs producing 41 and 51 watts(e) at 28 volts are presented. The presented performance parameters were derived by detailed thermal, thermoelectric, and electrical analyses (including radiator geometry optimization) described in the paper. The Fairchild study showed that, with appropriate modifications, the Teledyne design can be scaled up to higher power levels, and it identified solutions to ensure adequate fuel clad ductility at launch temperatures and adequate thermal conductance from the thermoelectric cold ends to the RTG housing.

  14. Reliability comparison of various nuclear propulsion configurations for Mars mission

    SciTech Connect

    Segna, D.R.; Dagle, J.E.; Lyon, W.F. III

    1992-01-01

    Currently, trade-offs are being made among the various propulsion systems being considered for the Space Exploration Initiative (SEI) missions. It is necessary to investigate the reliability aspects as well as the efficiency, mass savings, and experience characteristics of the various configurations. Reliability is a very important factor for the SEI missions because of the long duration and because problems will be fixed onboard. The propulsion options that were reviewed consist of nuclear thermal propulsion (NTP), nuclear electric propulsion (NEP) and various configurations of each system. There were four configurations developed for comparison with the NTP as baselined in the Synthesis (1991): (1) NEP, (2) hybrid NEP/NTP, (3) hybrid with power beaming, and (4) NTP upper stage on the heavy lift launch vehicle (HLLV). The comparisons were based more or less on a qualitative review of complexity, stress levels and operations for each of the four configurations. Each configuration included a pressurized NEP and an NTP ascent stage propulsion system for the Mars mission.

  15. Maximizing Energy Savings with New Technologies in Lighting and Lighting Controls

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Maximizing Energy Savings with New Technologies in Lighting and Lighting Controls Mike Matour, National Sales Manager - Energy Lutron Electronics Agenda * FEMP Promising Technologies * Today's Lighting Controls * Why Controls? * New Technologies - Wireless Solutions * New Technologies - Advanced Controls * LEDs - How to control? #1 Single Zone Lighting Controls Multi-Zone Lighting Controls Advanced Lighting & HVAC Control Systems Total Light Management 8 Simple Light Control Strategies /

  16. Another Side of Light - D

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    This means that the emitted light's frequency is either the same or lower. Einstein also ... Einstein noted that checking this proportionality with experiments would be an important ...

  17. Solid-State Lighting Webcasts

    SciTech Connect

    2011-12-16

    Links to past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available.

  18. LED Lighting Facts®

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... and NGL * Constantly changing based on feedback and input from stakeholders - Data ... the program value - 684 manufacturers, 360 retailersdistributors, 300 lighting ...

  19. Fluorescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    - by far the most common form of fluorescent lighting but rarely found in residential buildings -- are much more energy efficient than incandescent lamps and are ideally suited...

  20. Incandescent Lighting | Department of Energy

    Office of Environmental Management (EM)

    courtesy of iStockphotoTokenPhoto. Incandescent lamps are often considered the least energy efficient type of electric lighting commonly found in residential buildings....

  1. Presentation: Synchrotron Radiation Light Sources

    Energy.gov [DOE]

    A briefing to the Secretary's Energy Advisory Board on Synchrotron Radiation Light Sources delivered by Patricia Dehmer, U.S. Department of Energy

  2. Connected Lighting Systems Workshop Registration

    Energy.gov [DOE]

    The registration fee for the 2016 DOE Connected Lighting Systems Workshop includes admission to all sessions, networking breakfasts and lunches, and an evening networking reception.

  3. Energy Savings Activities-Lighting

    Education - Teach & Learn

    Students use the scientific method to examine school lighting technologies and determine if there are opportunities to save energy and money.

  4. Common Industrial Lighting Upgrade Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The current causes mercury atoms to ionize generating ultraviolet photons otherwise known as ultraviolet light invisible to the human eye. These photons react with a phosphor ...

  5. Energy Efficiency Through Lighting Upgrades

    Energy Saver

    Chickasaw Nation Energy Efficiency Through Lighting Upgrades The Chickasaw Nation The Chickasaw Nation consists of 13 counties in southeastern Oklahoma Tribal enrollment ...

  6. Shedding Light on Nanocrystal Defects

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Shedding Light on Nanocrystal Defects Print Nanocrystals have been the focus of much scientific interest lately, given their various advantageous mechanical properties. Their...

  7. Linac Coherent Light Source Overview

    Office of Energy Efficiency and Renewable Energy (EERE)

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  8. Linac Coherent Light Source Overview

    ScienceCinema

    None

    2016-07-12

    Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

  9. Northeast Energy Efficiency Partnerships: Advanced Lighting Controls...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Northeast Energy Efficiency Partnerships: Advanced Lighting Controls Credit: Northeast Energy Efficiency...

  10. LED Lighting: Just the Facts, Please!

    Energy.gov [DOE]

    Now there's another arsenal in the toolbox to help consumers find LED lights they can trust: the Lighting Facts™ label.

  11. The Linac Coherent Light Source

    DOE PAGES [OSTI]

    White, William E.; Robert, Aymeric; Dunne, Mike

    2015-05-01

    The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

  12. Installing a Light Source 'Racetrack'

    Energy.gov [DOE]

    This month, workers at Brookhaven National Laboratory’s National Synchrotron Light Source II (NSLS-II), the half-mile electron racetrack for one of the world’s most advanced light sources, will begin filling the facility’s steel and concrete shell.

  13. Light beam frequency comb generator

    DOEpatents

    Priatko, G.J.; Kaskey, J.A.

    1992-11-24

    A light beam frequency comb generator uses an acousto-optic modulator to generate a plurality of light beams with frequencies which are uniformly separated and possess common noise and drift characteristics. A well collimated monochromatic input light beam is passed through this modulator to produce a set of both frequency shifted and unshifted optical beams. An optical system directs one or more frequency shifted beams along a path which is parallel to the path of the input light beam such that the frequency shifted beams are made incident on the modulator proximate to but separated from the point of incidence of the input light beam. After the beam is thus returned to and passed through the modulator repeatedly, a plurality of mutually parallel beams are generated which are frequency-shifted different numbers of times and possess common noise and drift characteristics. 2 figs.

  14. Light beam frequency comb generator

    DOEpatents

    Priatko, Gordon J.; Kaskey, Jeffrey A.

    1992-01-01

    A light beam frequency comb generator uses an acousto-optic modulator to generate a plurality of light beams with frequencies which are uniformly separated and possess common noise and drift characteristics. A well collimated monochromatic input light beam is passed through this modulator to produce a set of both frequency shifted and unshifted optical beams. An optical system directs one or more frequency shifted beams along a path which is parallel to the path of the input light beam such that the frequency shifted beams are made incident on the modulator proximate to but separated from the point of incidence of the input light beam. After the beam is thus returned to and passed through the modulator repeatedly, a plurality of mutually parallel beams are generated which are frequency-shifted different numbers of times and possess common noise and drift characteristics.

  15. Supersymmetry across the light and heavy-light hadronic spectrum

    SciTech Connect

    Dosch, Hans Gunter; de Teramond, Guy F.; Brodsky, Stanley J.

    2015-10-07

    Relativistic light-front bound-state equations for mesons and baryons can be constructed in the chiral limit from the supercharges of a superconformal algebra which connect baryon and meson spectra. Quark masses break the conformal invariance, but the basic underlying supersymmetric mechanism, which transforms meson and baryon wave functions into each other, still holds and gives remarkable connections across the entire spectrum of light and heavy-light hadrons. As a result, we also briefly examine the consequences of extending the supersymmetric relations to double-heavy mesons and baryons.

  16. Light water detritiation

    SciTech Connect

    Fedorchenko, O.A.; Aleksee, I.A.; Bondarenko, S.D.; Vasyanina, T.V.

    2015-03-15

    Hundreds of thousands of tons of tritiated light water have been accumulating from the enterprises of nuclear fuel cycles around the world. The Dual-Temperature Water-Hydrogen (DTWH) process looks like the only practical alternative to Combined Electrolysis and Catalytic Exchange (CECE). In DTWH power-consuming lower reflux device (electrolytic cell) is replaced by a so-called 'hot tower' (LPCE column operating at conditions which ensure relatively small value of elementary separation factor α(hot)). In the upper, cold tower, the tritium transfers from hydrogen to water while in the lower, hot tower - in the opposite direction - from water to hydrogen. The DTWH process is much more complicated compared to CECE; it must be thoroughly computed and strictly controlled by an automatic control system. The use of a simulation code for DTWH is absolutely important. The simulation code EVIO-5 deals with 3 flows inside a column (hydrogen gas, water vapour and liquid water) and 2 simultaneous isotope exchange sub-processes (counter-current phase exchange and co-current catalytic exchange). EVIO-5 takes into account the strong dependence of process performance on given conditions (temperature and pressure). It calculates steady-state isotope concentration profiles considering a full set of reversible exchange reactions between different isotope modifications of water and hydrogen (12 molecular species). So the code can be used for simulation of LPCE column operation for detritiation of hydrogen and water feed, which contains H and D not only at low concentrations but above 10 at.% also. EVIO-5 code is used to model a Tritium Removal Facility with a throughput capacity of about 400 m{sup 3}/day. Simulation results show that a huge amount of wet-proofed catalyst is required (about 6000 m{sup 3}), mainly (90%) in the first stage. One reason for these large expenses (apart from a big scale of the problem itself) is the relatively high tritium separation factor in the hot tower

  17. Fluorescent Lighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fluorescent Lighting Basics Fluorescent Lighting Basics October 17, 2013 - 5:39pm Addthis Light from a fluorescent lamp is first created by an electric current conducted through an inert gas producing ultraviolet light that is invisible to the human eye. The ultraviolet light in turn interacts with special blends of phosphors coating the interior surface of the fluorescent lamp tube that efficiently converts the invisible light into useful white light. Fluorescent lamps require a special power

  18. Fluorescent Lighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fluorescent Lighting Basics Fluorescent Lighting Basics October 17, 2013 - 5:39pm Addthis Light from a fluorescent lamp is first created by an electric current conducted through an inert gas producing ultraviolet light that is invisible to the human eye. The ultraviolet light in turn interacts with special blends of phosphors coating the interior surface of the fluorescent lamp tube that efficiently converts the invisible light into useful white light. Fluorescent lamps require a special power

  19. Types of Lighting in Commercial Buildings - Lighting Characteristics

    Energy Information Administration (EIA) (indexed site)

    "coolness" of the color appearance of the lamp's light. The CCT is given in the Kelvin (K) temperature scale, and the higher the color temperature, the cooler the appearance of...

  20. Adoption of Light-Emitting Diodes in Common Lighting Applications

    SciTech Connect

    Yamada, Mary; Chwastyk, Dan

    2013-05-01

    Report estimating LED energy savings in nine applications where LEDs compete with traditional lighting sources such as incandescent, halogen, high-pressure sodium, and certain types of fluorescent. The analysis includes indoor lamp, indoor luminaire, and outdoor luminaire applications.

  1. Transformations in Lighting: The Eighth Annual Solid-State Lighting...

    Energy Saver

    ... Citing the inherent controllability of LEDs as well as the low cost of adding a photo cell ... Decai Sun offered an overview of Philips Lumileds Lighting's efforts to achieve an ...

  2. Light-duty vehicle summary

    SciTech Connect

    Williams, L.S. ); Hu, P.S. )

    1990-07-01

    This document brings you up to date on the most recent fuel economy and market share data for the new light-duty vehicle fleet. Model year 1990 fuel economies are weighted based on the sales of the first six months of model year 1990 (from September 1989 to March 1990). Sales-weighted fuel economy of all new automobiles decreased in the first six months of model year 1990, from 28.0 mpg in model year 1989 to 27.7 mpg. The compact, midsize, and large size classes, which together claimed 75% of the new automobile market, each showed fuel economy declines of 0.4 mpg or more. Unlike automobiles, new 1990 light trucks showed an overall 0.4 mpg gain from model year 1989. This increase was primarily due to the increased fuel economy of the small van size class. In the first half of model year 1990, small van replaced small pickup as the second most popular light truck size class. Although the fuel economy of light trucks improved, the larger market share of automobiles in the light-duty vehicle market (automobiles and light trucks combined) and the decreased fuel economy in automobiles resulted in an overall reduction of 0.2 mpg for the entire light-duty vehicle fleet in the first half of model year 1990. Also, in the first half of model year 1990, light trucks claimed more than 33% of the light-duty vehicle market--a considerable increase from the 19.8% share in 1976. 9 figs., 18 tabs.

  3. Inorganic volumetric light source excited by ultraviolet light

    DOEpatents

    Reed, Scott; Walko, Robert J.; Ashley, Carol S.; Brinker, C. Jeffrey

    1994-01-01

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light.

  4. Inorganic volumetric light source excited by ultraviolet light

    DOEpatents

    Reed, S.; Walko, R.J.; Ashley, C.S.; Brinker, C.J.

    1994-04-26

    The invention relates to a composition for the volumetric generation of radiation. The composition comprises a porous substrate loaded with a component capable of emitting radiation upon interaction with an exciting radiation. Preferably, the composition is an aerogel substrate loaded with a component, e.g., a phosphor, capable of interacting with exciting radiation of a first energy, e.g., ultraviolet light, to produce radiation of a second energy, e.g., visible light. 4 figures.

  5. Light metal explosives and propellants

    DOEpatents

    Wood, Lowell L.; Ishikawa, Muriel Y.; Nuckolls, John H.; Pagoria, Phillip F.; Viecelli, James A.

    2005-04-05

    Disclosed herein are light metal explosives, pyrotechnics and propellants (LME&Ps) comprising a light metal component such as Li, B, Be or their hydrides or intermetallic compounds and alloys containing them and an oxidizer component containing a classic explosive, such as CL-20, or a non-explosive oxidizer, such as lithium perchlorate, or combinations thereof. LME&P formulations may have light metal particles and oxidizer particles ranging in size from 0.01 .mu.m to 1000 .mu.m.

  6. The Momentum of Light - C

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    C. More direct evidence As we've noted, relativity theory implies that a quantum of energy ought to be a quantum of momentum as well. While Einstein's analysis showed that this idea was consistent with known facts about light and matter, modern experiments with individual light quanta and subatomic particles demonstrate the existence of momentum quanta more directly. One early demonstration was an effect studied by Arthur Holly Compton. When x-rays a high-frequency form of light-collide with

  7. Power considerations for an early manned Mars mission utilizing the space station

    SciTech Connect

    Valgora, M.E.

    1987-01-01

    Power requirements and candidate electrical power sources were examined for the supporting space infrastructure for an early (2004) manned Mars mission. This two-year mission (60-day stay time) assumed a single six crew piloted vehicle with a Mars lander for four of the crew. The transportation vehicle was assumed to be a hydrogen/oxygen propulsion design with or without large aerobrakes and assembled and checked out on the LEO Space Station. The long transit time necessitated artificial gravity of the crew by rotating the crew compartments. This rotation complicates power source selection. Candidate power sources were examined for the Lander, Mars Orbiter, supporting Space Station, co-orbiting Propellant Storage Depot, and alternatively, a co-orbiting Propellant Generation (water electrolysis) Depot. Candidates considered were photovoltaics with regenerative fuel cells or batteries, solar dynamics, isotope dynamics, and nuclear power.

  8. OLED lighting devices having multi element light extraction and luminescence conversion layer

    DOEpatents

    Krummacher, Benjamin Claus; Antoniadis, Homer

    2010-11-16

    An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  9. Device structure for OLED light device having multi element light extraction and luminescence conversion layer

    DOEpatents

    Antoniadis; Homer , Krummacher; Benjamin Claus

    2008-01-22

    An apparatus such as a light source has a multi-element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

  10. Incandescent Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    These lamps produce visible light by heating a tiny coil or filament of tungsten wire that glows when it is heated by an electrical current. "Long-life" lamps are an example of ...

  11. Light ESCO | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ESCO Jump to: navigation, search Name: Light ESCO Place: Rio de Janeiro, Brazil Zip: Caixa Postal 0571 Product: Rio de Janeiro-based energy service company that specialises in...

  12. Lighting Controls | Department of Energy

    Energy Saver

    LED bulbs and fixtures must be designed for dimming, and you may need to replace existing dimmer switches with ones that are compatible with an LED lighting product. The packaging ...

  13. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    bulbs and can last up to three times longer than traditional incandescent light bulbs. ... ENERGY STAR-qualified CFLs use about 75% less energy and last up to 10 times longer than ...

  14. Next Generation Light Source Workshops

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

  15. Solid-State Lighting Webcasts

    Energy.gov [DOE]

    Below you'll find links to information about past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available.

  16. Columbia Water & Light- Solar Rebates

    Energy.gov [DOE]

    Columbia Water & Light electric customers are eligible for a $400 rebate for the purchase of a new solar water heater. To apply for this rebate, a customer submits a pre-approval application to...

  17. Projection screen having reduced ambient light scattering

    SciTech Connect

    Sweatt, William C.

    2010-05-11

    An apparatus and method for improving the contrast between incident projected light and ambient light reflected from a projection screen are described. The efficiency of the projection screen for reflection of the projected light remains high, while permitting the projection screen to be utilized in a brightly lighted room. Light power requirements from the projection system utilized may be reduced.

  18. Snapshot: Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Outdoor Area Lighting Snapshot: Outdoor Area Lighting A report using LED Lighting Facts data to examine the current state of the market for outdoor area lighting. (8 pages, September 2016) Snapshot: Outdoor Area Lighting (3.02 MB) More Documents & Publications Snapshot: Downlights October 2016 Postings LED ADOPTION REPORT

  19. Laser-Firing ChemCam Vital to Curiosity Rover's Tour of Mars | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Laser-Firing ChemCam Vital to Curiosity Rover's Tour of Mars Laser-Firing ChemCam Vital to Curiosity Rover's Tour of Mars March 6, 2014 - 2:00pm Addthis 1 of 4 Jean-Luc Lacour, an engineer at CEA France, created this artistic rendering of the ChemCam back in 2004. Looking at rocks and soil from a distance, ChemCam fires a high-powered laser to analyze the composition of vaporized materials from areas smaller than 1 millimeter on the surface of Martian rocks and soil as part of

  20. A high precision gamma-ray spectrometer for the Mars-94 mission

    SciTech Connect

    Mitrofanov, I.G.; Anfimov, D.S.; Chernenko, A.M.

    1994-06-01

    The high precision gamma-ray spectrometer (PGS) is scheduled to be launched on the Mars-94 mission in October 1994, and to go into an elliptical polar orbit around Mars. The PGS consists of two high-purity germanium (Ge) detectors, associated electronics, and a passive cooler and will be mounted on one of the solar panels. The PGS will measure nuclear gamma-ray emissions from the martian surface, cosmic gamma-ray bursts, and the high-energy component of solar flares in the broad energy range from 50 KeV to 8 MeV using 4096 energy channels.

  1. Radiation dose estimates for typical piloted NTR lunar and Mars mission engine operations

    SciTech Connect

    Schnitzler, B.G. ); Borowski, S.K. . Lewis Research Center)

    1991-01-01

    The natural and manmade radiation environments to be encountered during lunar and Mars missions are qualitatively summarized. The computational methods available to characterize the radiation environment produced by an operating nuclear propulsion system are discussed. Mission profiles and vehicle configurations are presented for a typical all-propulsive, fully reusable lunar mission and for a typical all-propulsive Mars mission. Estimates of crew location biological doses are developed for all propulsive maneuvers. Post-shutdown dose rates near the nuclear engine are estimated at selected mission times. 15 refs., 4 figs.

  2. OSTIblog Articles in the Mars Topic | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information Topic Science and a Movie by Kathy Chambers 18 Sep, 2012 in Science Communications 4264 Rickman.png Science and a Movie Read more about 4264 DOE's ScienceCinema is now showing "A LANL Scientist's Dream Takes Off to Zap Rocks on Mars" starring Roger Wiens. At age 9, Roger Wiens and his brother built rockets, a whole fleet of rockets. They also built a telescope that allowed them to draw craters they saw on Mars when it neared close to earth.

  3. ChemCam on Mars (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ChemCam on Mars Citation Details In-Document Search Title: ChemCam on Mars Authors: Clegg, Samuel M. [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2012-10-17 OSTI Identifier: 1053549 Report Number(s): LA-UR-12-25600 DOE Contract Number: AC52-06NA25396 Resource Type: Technical Report Research Org: Los Alamos National Laboratory (LANL) Sponsoring Org: NASA Country of Publication: United States Language: English Subject: Atomic & Molecular Physics(74) Word

  4. Keck Institute for Space Studies "Addressing the MARS ISRU Challenge"

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Workshop - JCAP Keck Institute for Space Studies "Addressing the MARS ISRU Challenge" Workshop Keck Institute for Space Studies "Addressing the MARS ISRU Challenge" Workshop Tue, Jun 28, 2016 3:30pm 15:30 Fri, Jul 1, 2016 4:30pm 16:30 California Institute of Technology Pasadena, CA USA Members of JCAP and JPL helped co-organize a workshop on the "production of oxygen and fuel from CO2 using sunlight", which was held at Caltech from June 28-July 1. More

  5. Series cell light extinction monitor

    DOEpatents

    Novick, Vincent J.

    1990-01-01

    A method and apparatus for using the light extinction measurements from two or more light cells positioned along a gasflow chamber in which the gas volumetric rate is known to determine particle number concentration and mass concentration of an aerosol independent of extinction coefficient and to determine estimates for particle size and mass concentrations. The invention is independent of particle size. This invention has application to measurements made during a severe nuclear reactor fuel damage test.

  6. WET MARS: Plentiful, Readily-Available Martian Water and its Implications

    SciTech Connect

    Hyde, R.; Ishikawa, M.; Nuckolls, J.; Whitehead, J.; Wood, L.

    1999-09-14

    Water and its major constituent, oxygen, in large specific quantities are essential for maintenance of human life. Providing them in adequate quantities is widely believed to be a major challenge for human exploration and settlement of Mars. The Martian regolith isn't known to bear either water or hydrogen, the ice-rich Martian polar regions are thermally inhospitable, and the measured water content of Mars' thin atmosphere represents a layer of liquid water of average thickness only {approx}1% that available on the Moon, or {approx}0.001 cm. Crucially, however, the atmospheric Martian water inventory is advected meteorologically to everyplace on Mars, so that the few cubic kilometers of liquid water-equivalent in the atmosphere are available anywhere when, merely for the effort of condensing it. Well-engineered apparatus deployed essentially anywhere on Mars can condense water from the atmosphere in daily quantities not much smaller than its own mass, rejecting into space from radiators deployed over the local terrain the water's heat-of-condensation and the heat from non-ideality of the equipment's operation. Thus, an optimized, photovoltaically-powered water-condensing system of {approx}0.3 tons mass could strip 40 tons of water each year from {approx} 10{sup 4} times this mass of thin, dry Martian air. Given a 490 set I{sup sp} of H{sub 2}-O{sub 2} propulsion systems exhausting into the 6 millibar Mars-surface atmosphere and the 5.0 km/s Martian gravity well, {approx}40 tons of water two-thirds converted into 5:1 O{sub 2}/H{sub 2} cryogenic fuel could support exploration and loft a crew-of-four and their 8-ton ascent vehicle into Earth-return trajectory. The remaining H{sub 2}O and excess O{sub 2} would suffice for half-open-cycle life support for a year's exploration-intensive stay on Mars. A Mars Expedition thus needs to land only explorers, dehydrated food, habitation gear and unfueled exploration/Earth-return equipment--and a water/oxygen/fuel plant

  7. New Mars rover findings revealed at American Geophysical Union conference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Sky | Department of Energy Mariners and a Massive Map: Berkeley Computers Calculate What's in the Sky New Mariners and a Massive Map: Berkeley Computers Calculate What's in the Sky February 2, 2012 - 12:08pm Addthis This is the Southern Galactic Cap view as recorded by the Sloan Digital Sky Survey. A 2.5-meter telescope at Apache Point Observatory in New Mexico took in light from over a third of the total area of the sky (14,000 square degrees) including 1.5 million galaxies. | Photo

  8. Lighting system replacement brings energy costs down, light levels up

    SciTech Connect

    Radmer, D.J.

    1984-11-08

    The R.J. Frisby Mfg. Co. operates on three shifts and produces precision screw machine products for a variety of industries, including automotive, marine, machine tool, hydraulics and pneumatics, business machines, electrical and electronics, photography, and precision instruments. The required degree of manufacturing precision demands high light levels in manufacturing areas. When the 100,000 sq ft plant was built in 1973, mercury vapor lighting was installed consistent with the current state of the art for lighting such facilities. In the ensuing years, it became apparent that the soaring electric bills that came in the wake of the Arab oil embargo of 1973-74 would have to be controlled. Estimates by the U.S. Department of Energy indicated that electric energy costs were likely to rise by 160 percent over the next 10 yr. Based on this estimate, and the fact that lighting accounted for $70,000, or half of the annual electric bill, it was estimated that $900,000 to $1,000,000 would be spent for lighting energy over the next decade. The concern over the probability of rapidly escalating electrical costs was soon justified when, in three steps over one 12 mo period, the electric energy rate increased from $0.0305/kwh to $0.0416/kwh -more than a 36 percent increase. During that same period, the demand charge was raised in two steps from $3.75/kw to $4.85/kw --more than a 29 percent increase.

  9. Solid-State Lighting | Department of Energy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of Princeton's approach to solid-state lighting. Read more A Comprehensive Program Solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by...

  10. Outdoor Solar Lighting | Department of Energy

    Office of Environmental Management (EM)

    Some solar lighting systems are self-contained units: You only need to place the lights in a sunny location. Others have the lights separate from a solar cell panel, in which case ...

  11. Luminous Efficacy Standards for General Purpose Lights

    Energy.gov [DOE]

    *Efficacy refers to the overall energy efficiency of light and is measured in lumens (measure of light output) per watt (measure of power input). The efficacy of a typical incandescent light bulb...

  12. D light design | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    light design Jump to: navigation, search Name: d.light design Place: New Delhi, Delhi (NCT), India Zip: 1110049 Product: d.light is a US-founded, India-based designer and...

  13. Controlling Light | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Controlling Light June 29, 2016 Controlling Light New protection for photosynthetic organisms VIEW ARTICLE HERE https://source.wustl.edu/2016/06/controlling-light-new-protection-photosynthetic... In the News News/Media

  14. Flexible liquid core light guide with focusing and light shaping attachments

    DOEpatents

    Kross, Brian J.; Majewski, Stanislaw; Zorn, Carl J.; Majewski, Lukasz A.

    1997-01-01

    A liquid light guide system for ultraviolet light is disclosed that has a light shaping arrangement for the emitted light, a stable liquid core and sheath and reliable and effective end closures.

  15. Flexible liquid core light guide with focusing and light shaping attachments

    DOEpatents

    Kross, B.J.; Majewski, S.; Zorn, C.J.; Majewski, L.A.

    1997-11-04

    A liquid light guide system for ultraviolet light is disclosed that has a light shaping arrangement for the emitted light, a stable liquid core and sheath and reliable and effective end closures. 12 figs.

  16. LED Lighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    LED Lighting Basics LED Lighting Basics August 16, 2013 - 10:07am Addthis Light-emitting diodes (LEDs) efficiently produce light in a fundamentally different way than any legacy or traditional light source. LEDs are compound semiconductor devices that produce light when an appropriate electrical current is applied. Applying electrical current causes electrons to flow from one material in the structure to another and this in turn causes a series of complex interactions at an atomic level that

  17. Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Outdoor Area Lighting Outdoor Area Lighting This document reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy plant-wide while providing high quality lighting for outdoor areas. Outdoor Area Lighting (June 2008) (3.16 MB) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Model Specification for LED Roadway Luminaires, V2.0

  18. Picture of the Week: Circuits of light

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5 Circuits of light This artistic conceptualization of circuits made of light represents a new capability that could lead to advanced sensor systems, quantum information processing technology, and more. March 25, 2016 circuits of light artist's conception Circuits of light: artist's conception View a super-large 300 dpi version of this image on our Lab Flickr site. Circuits of light This artistic conceptualization of circuits made of light represents a new capability that could lead to advanced

  19. Testimonials - Partnerships in LED Lighting - Philips Lumileds

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting, LLC | Department of Energy LED Lighting - Philips Lumileds Lighting, LLC Testimonials - Partnerships in LED Lighting - Philips Lumileds Lighting, LLC Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Sunil Thomas, General Manager of San Jose Manufacturing Site, Philips Lumileds Lighting, LLC" and footage of a man sitting in a showcase

  20. Connected Lighting Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Connected Lighting Systems Connected Lighting Systems The replacement of today's lighting infrastructure with LED products offers the potential for future connected lighting systems that could become a data-collection platform that enables greater energy savings in buildings and cities. Such connected lighting systems can not only dras-tically improve the energy performance of lighting and other building systems, but also enable a wide array of services, benefits, and revenue streams that would

  1. Innovative Office Lighting System with Integrated Spectrally...

    Energy.gov [DOE] (indexed site)

    Innovative Patient Room Lighting System with Integrated Spectrally Adaptive Control Next-Generation "Giant" Quantum Dots: Performance-Engineered for Lighting Identification and ...

  2. Hagerstown Light Department | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hagerstown Light Department Jump to: navigation, search Name: Hagerstown Light Department Place: Maryland Phone Number: (301) 790-2600 Website: www.hagerstownmd.orgindex.asp...

  3. OTEC- Commercial Lighting Retrofit Rebate Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Oregon Trail Electric Consumers Cooperative (OTEC) offers a commercial lighting retrofit program that provides rebates for commercial businesses that change existing lighting to more energy...

  4. Indianapolis Power & Light- Business Energy Incentives Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Indiana Power and Light Business (IPL) Energy Incentives Program assists commercial and industrial customers with reducing energy consumption through three common types of equipment: lighting,...

  5. ATS Lighting Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ATS Lighting Inc Jump to: navigation, search Name: ATS Lighting Inc Address: PO Box 1383 Place: Concord, Massachusetts Zip: 01742 Region: Greater Boston Area Sector: Efficiency...

  6. Poudre Valley REA- Commercial Lighting Rebate Program

    Energy.gov [DOE]

    Poudre Valley Rural Electric Association (PVREA), a Touchstone Energy Cooperative, offers a variety of lighting rebates to commercial customers. Rebates are available on commercial lighting...

  7. solid state lighting | netl.doe.gov

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Solid-State Lighting Solid-State Lighting (SSL) is an emerging technology with the ... SSL will mean greener homes and businesses that use substantially less electricity, making ...

  8. Adaptive Street Lighting Controls | Department of Energy

    Energy Saver

    Solid-State Lighting Home About the Solid-State Lighting Program Research & Development Understanding SSL Information Resources Conferences & Meetings Presentations Publications ...

  9. Municipal Consortium LED Street Lighting Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls Panel David Bueno, ...

  10. Solar Electric Light Fund | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Fund Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Solar Electric Light Fund AgencyCompany Organization: Solar Electric Light Fund Sector: Energy Focus Area: Solar...

  11. SciTech Connect: "light emitting diode"

    Office of Scientific and Technical Information (OSTI)

    light emitting diode" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "light emitting diode" Semantic Semantic Term Title: Full Text:...

  12. Lighting Market Study: Illuminating the Northwest Efficiency

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lighting Market Study: Illuminating the Northwest Efficiency Community Summer 2014 through Winter 2015 Research Manager: Carrie Cobb, clcobb@bpa.gov, 503-230-4985 The lighting...

  13. Renaissance Lighting Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Renaissance Lighting Inc. Place: Herndon, Virginia Product: Utilizing patented LED optics, Renaissance Lighting delivers uniformity in wall wash and floodlight applications by...

  14. Cedarburg Light & Water Comm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Cedarburg Light & Water Comm Jump to: navigation, search Name: Cedarburg Light & Water Comm Place: Wisconsin Phone Number: (262) 375-7650 Website: www.cedarburglightandwater.com...

  15. Paragould Light & Water Comm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Paragould Light & Water Comm Jump to: navigation, search Name: Paragould Light & Water Comm Place: Arkansas Phone Number: (870) 239-7700 Website: www.paragould.com Facebook:...

  16. Clarksville Light & Water Co | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Clarksville Light & Water Co Jump to: navigation, search Name: Clarksville Light & Water Co Place: Arkansas Phone Number: 479-754-3148 Website: www.clarksvillelightwater.com...

  17. Two Rivers Water & Light | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Water & Light Jump to: navigation, search Name: Two Rivers Water & Light Place: Wisconsin Phone Number: (920) 793-5550 Website: trwaterandlight.com Facebook: https:...

  18. Parkland Light & Water Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Parkland Light & Water Company Jump to: navigation, search Name: Parkland Light & Water Company Place: Washington Phone Number: (253) 531-5666 Website: www.plw.coop Outage...

  19. Lockwood Water & Light Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lockwood Water & Light Company Jump to: navigation, search Name: Lockwood Water & Light Company Place: Missouri Phone Number: 417-232-4221 Outage Hotline: 417-232-4221 References:...

  20. Brodhead Water & Lighting Comm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Brodhead Water & Lighting Comm Jump to: navigation, search Name: Brodhead Water & Lighting Comm Place: Wisconsin Phone Number: 608-897-2505 Website: www.cityofbrodheadwi.usdepart...

  1. Varon Lighting Group LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Varon Lighting Group LLC Jump to: navigation, search Name: Varon Lighting Group LLC Place: Chicago, Illinois Zip: 60126 Product: Chicago-based manufacturer of energy-efficient...

  2. Wenzhou Dazhan Lighting Co | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wenzhou Dazhan Lighting Co Jump to: navigation, search Name: Wenzhou Dazhan Lighting Co Place: Wenzhou, Zhejiang Province, China Zip: 325000 Sector: Solar Product: China-based...

  3. Maximizing Light Utilization Efficiency and Hydrogen Production...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Maximizing Light Utilization Efficiency and Hydrogen Production in Microalgal Cultures, DOE Hydrogen Program FY 2010 Annual Progress Report Maximizing Light Utilization Efficiency ...

  4. 1999 Commercial Buildings Characteristics--Glossary--Lighting...

    Energy Information Administration (EIA) (indexed site)

    produces light by passing electricity through mercury vapor, causing the fluorescent coating to glow, or fluoresce. Excluded are compact fluorescent light bulbs, which are listed...

  5. Moon Solar Light MSL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Product: developed and distributes solar-based lighting applications using PV panels, LED lights and ultra-capacitors. Coordinates: 31.899309, 34.807999 Show Map Loading...

  6. Visible Light Solar Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Solar Technologies Place: Albuquerque, New York Zip: 87113 Product: New Mexico-based LED lighting fixture maker. References: Visible Light Solar Technologies1 This article is...

  7. 2016 Animal Responses to Light Meeting Report

    Energy.gov [DOE] (indexed site)

    ... of the Agency's recent applications of sea turtle lighting in the northern Gulf of Mexico. ... Given sea turtle sensitivities to short wavelengths, outdoor amber LED lighting (with ...

  8. Lighting Control Design | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Control Design Jump to: navigation, search Name: Lighting Control & Design Place: Glendale, California Zip: CA 91201 Product: California-based manufacturer of digital lighting...

  9. Types of Lighting in Commercial Buildings - Introduction

    Energy Information Administration (EIA) (indexed site)

    Introduction Lighting is a major consumer of electricity in commercial buildings and a target for energy savings through use of energy-efficient light sources along with other...

  10. Solid-State Lighting Program Strategy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    James R. Brodrick, Ph.D. April 22, 2014 U.S. Department of Energy Solid-State Lighting Program Strategy MARKET * Many companies * Semiconductors :: Lighting * Large business ...

  11. Carbon Power & Light, Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Power & Light, Inc Jump to: navigation, search Name: Carbon Power & Light, Inc Place: Wyoming Phone Number: 307-326-5206 Website: www.carbonpower.com Facebook: https:...

  12. Hemphill Power Light Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Power Light Company Jump to: navigation, search Name: Hemphill Power & Light Company Place: Springfield, New Hampshire Sector: Biomass Product: Owner and operator of a 16MW...

  13. Keosauqua Municipal Light & Pwr | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Keosauqua Municipal Light & Pwr Jump to: navigation, search Name: Keosauqua Municipal Light & Pwr Place: Iowa Phone Number: 319-293-3406 Website: villagesofvanburen.comdirecto...

  14. Thurmont Municipal Light Co | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Thurmont Municipal Light Co Jump to: navigation, search Name: Thurmont Municipal Light Co Place: Maryland Phone Number: 301-271-7313 Website: www.thurmont.com Facebook: https:...

  15. Light Electric Vehcles Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Electric Vehcles Company Jump to: navigation, search Name: Light Electric Vehcles Company Place: Eugene, Oregon Zip: 97440-1316 Sector: Vehicles Product: LightEVs expects to offer...

  16. Indianapolis Power Light | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Light Jump to: navigation, search Name: Indianapolis Power & Light Place: Indianapolis, Indiana Sector: Wind energy Product: US utility company. The firm is buying wind energy from...

  17. Orcas Power & Light Coop | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Orcas Power & Light Coop Jump to: navigation, search Name: Orcas Power & Light Coop Place: Washington Phone Number: Eastsound Office: (360) 376-3500; Friday Harbor Office: (360)...

  18. Bozrah Light & Power Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Bozrah Light & Power Company Jump to: navigation, search Name: Bozrah Light & Power Company Place: Connecticut Phone Number: (860) 889-7388 Website: www.grotonutilities.comblp.as...

  19. Willwood Light & Power Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Willwood Light & Power Company Jump to: navigation, search Name: Willwood Light & Power Company Place: Wyoming Phone Number: (307) 754-3831 Facebook: https:www.facebook.com...

  20. Lakeview Light & Power | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Lakeview Light & Power Jump to: navigation, search Name: Lakeview Light & Power Place: Washington Phone Number: (253) 584-6060 Website: lakeviewlight.com Facebook: https:...

  1. Glencoe Light & Power Comm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Glencoe Light & Power Comm Jump to: navigation, search Name: Glencoe Light & Power Comm Place: Minnesota Website: glencoelightandpower.com Outage Hotline: 320-864-5184 References:...

  2. Laser Light Engines | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Laser Light Engines Jump to: navigation, search Name: Laser Light Engines Place: Salem, New Hampshire Zip: NH 03079 Sector: Efficiency Product: Salem-based, designs, develops and...

  3. Cornwall Light Power CLP | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Cornwall Light Power CLP Jump to: navigation, search Name: Cornwall Light & Power (CLP) Place: Didcot, England, United Kingdom Zip: OX11 9DD Sector: Wind energy Product:...

  4. Anthracite Power & Light | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Anthracite Power & Light Jump to: navigation, search Name: Anthracite Power & Light Place: Pennsylvania Phone Number: 570-622-3000 Website: www.anthracitepower.com Outage Hotline:...

  5. Garland Light & Power Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Light & Power Company Jump to: navigation, search Name: Garland Light & Power Company Place: Wyoming Phone Number: 307-754-2881 Website: garlandpower.orgcontactus.cf Outage...

  6. Inland Power & Light Company | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Power & Light Company Jump to: navigation, search Name: Inland Power & Light Company Address: 10110 W. Hallett Road Place: Spokane, WA Zip: 99224 Phone Number: (877) 668-8243...

  7. Types of Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    selection. Types of lighting include: Fluorescent Incandescent Outdoor solar Light-emitting diode (LED) Also learn how energy-efficient lightbulbs compare to traditional...

  8. Xcel Energy - Residential Lighting Discount Program | Department...

    Energy.gov [DOE] (indexed site)

    in stores. Discounts do not apply to ENERGY STAR qualified fixtures, fans or lamps. Free Lighting Demonstrations Focus on Energy provides free lighting demonstrations at retail...

  9. Outdoor Area Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for outdoor areas. Outdoor Area Lighting (June 2008) More Documents & Publications Philadelphia International Airport Apron Lighting: LED System Performance in a Trial...

  10. Nanophotonic Architectures for Nanoscale Light Control (invited...

    Office of Scientific and Technical Information (OSTI)

    Nanophotonic Architectures for Nanoscale Light Control (invited). Citation Details In-Document Search Title: Nanophotonic Architectures for Nanoscale Light Control (invited). ...

  11. Light Water Reactor Sustainability Program - Integrated Program...

    Energy Saver

    Program - Integrated Program Plan Light Water Reactor Sustainability Program - Integrated Program Plan The Light Water Reactor Sustainability (LWRS) Program is a research and ...

  12. Light Water Reactor Sustainability Nondestructive Evaluation...

    Energy Saver

    Nondestructive Evaluation for Concrete Research and Development Roadmap Light Water ... US Department of Energy Office of Nuclear Energy's Light Water Reactor Sustainability ...

  13. Philadelphia International Airport Apron Lighting: LED System...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Philadelphia International Airport Apron Lighting: LED System Performance in a Trial Installation Philadelphia International Airport Apron Lighting: LED System Performance in a ...

  14. Green lights program in China

    SciTech Connect

    Dadi, Zhuo; Hong, Liu

    1996-12-31

    In China`s 9th 5-year plan (1996-2000), the Chinese government has placed high priority on energy conservation. The China Green Lights Program (CGLP) is listed as one of the key projects of energy conservation. The basic strategy of the CGLP is to mobilise all of the potential contributors to participate in the program, and to use market signals and supplementary non-market instruments to facilitate its implementation. Governmental funds and loans will be used as seed money to attract private participation in the program. The program contains the following elements: (1) Information dissemination to educate the public on the economic and other values of the program and to provide CGLP information to increase consumer awareness and, as a result, increase the demand for energy-efficient lighting systems. (2) Development of standards and codes for lighting systems, establishment of product specifications, and enforcement of product standards. (3) Development of quality certification and labelling system to provide assurances to consumers that the products they are purchasing will meet their performance and cost saving expectations. (4) Highlighted support and financing for production technology development and production capacity expansion. (5) Demonstration and pilot projects to boost consumer confidence in green lighting systems and to demonstrate new production technologies and processes. (6) International co-operation to expand the international exchange and absorb advanced technology and experience for implementation of the China Green Lights Program.

  15. Petroleum Marketing Monthly

    Energy Information Administration (EIA) (indexed site)

    9. Domes c crude oil fi rst purchase prices for selected crude streams dollars per barrel Year month Alaska North Slope California Kern River California Midway-Sunset Heavy Louisiana Sweet Louisiana Light Sweet Mars Blend West Texas Intermediate West Texas Sour Wyoming Sweet 1996 15.32 15.97 15.70 - - - 20.96 19.49 - 1997 14.84 15.02 14.88 - - - 19.27 17.77 - 1998 8.47 8.59 8.48 - - - 12.89 11.50 - 1999 12.46 14.02 12.22 - - - 17.78 16.66 - 2000 23.62 23.88 23.56 - - - 29.16 27.66 - 2001 18.18

  16. Enrichment of light hydrocarbon mixture

    DOEpatents

    Yang, Dali; Devlin, David; Barbero, Robert S.; Carrera, Martin E.; Colling, Craig W.

    2011-11-29

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  17. Enrichment of light hydrocarbon mixture

    DOEpatents

    Yang; Dali; Devlin, David; Barbero, Robert S.; Carrera, Martin E.; Colling, Craig W.

    2010-08-10

    Light hydrocarbon enrichment is accomplished using a vertically oriented distillation column having a plurality of vertically oriented, nonselective micro/mesoporous hollow fibers. Vapor having, for example, both propylene and propane is sent upward through the distillation column in between the hollow fibers. Vapor exits neat the top of the column and is condensed to form a liquid phase that is directed back downward through the lumen of the hollow fibers. As vapor continues to ascend and liquid continues to countercurrently descend, the liquid at the bottom of the column becomes enriched in a higher boiling point, light hydrocarbon (propane, for example) and the vapor at the top becomes enriched in a lower boiling point light hydrocarbon (propylene, for example). The hollow fiber becomes wetted with liquid during the process.

  18. Alteration of immature sedimentary rocks on Earth and Mars. Recording Aqueous and Surface-atmosphere Processes

    SciTech Connect

    Cannon, Kenneth M.; Mustard, John F.; Salvatore, Mark R.

    2015-03-05

    The rock alteration and rind formation in analog environments like Antarctica may provide clues to rock alteration and therefore paleoclimates on Mars. Clastic sedimentary rocks derived from basaltic sources have been studied in situ by martian rovers and are likely abundant on the surface of Mars. Moreover, how such rock types undergo alteration when exposed to different environmental conditions is poorly understood compared with alteration of intact basaltic flows. Here we characterize alteration in the chemically immature Carapace Sandstone from Antarctica, a terrestrial analog for martian sedimentary rocks. We employ a variety of measurements similar to those used on previous and current Mars missions. Laboratory techniques included bulk chemistry, powder X-ray diffraction (XRD), hyperspectral imaging and X-ray absorption spectroscopy. Through these methods we find that primary basaltic material in the Carapace Sandstone is pervasively altered to hydrated clay minerals and palagonite as a result of water–rock interaction. A thick orange rind is forming in current Antarctic conditions, superimposing this previous aqueous alteration signature. The rind exhibits a higher reflectance at visible-near infrared wavelengths than the rock interior, with an enhanced ferric absorption edge likely due to an increase in Fe3+ of existing phases or the formation of minor iron (oxy)hydroxides. This alteration sequence in the Carapace Sandstone results from decreased water–rock interaction over time, and weathering in a cold, dry environment, mimicking a similar transition early in martian history. This transition may be recorded in sedimentary rocks on Mars through a similar superimposition mechanism, capturing past climate changes at the hand sample scale. These results also suggest that basalt-derived sediments could have sourced significant volumes of hydrated minerals on early Mars due to their greater permeability compared with intact igneous rocks.

  19. Solid state electrochromic light modulator

    DOEpatents

    Cogan, Stuart F.; Rauh, R. David

    1993-01-01

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  20. Light Duty Efficient, Clean Combustion

    SciTech Connect

    Stanton, Donald W.

    2011-06-03

    Cummins has successfully completed the Light Duty Efficient Clean Combustion (LDECC) cooperative program with DoE. This program was established in 2007 in support of the Department of Energy’s Vehicles Technologies Advanced Combustion and Emissions Control initiative to remove critical barriers to the commercialization of advanced, high efficiency, emissions compliant internal combustion (IC) engines for light duty vehicles. Work in this area expanded the fundamental knowledge of engine combustion to new regimes and advanced the knowledge of fuel requirements for these diesel engines to realize their full potential. All of our objectives were met with fuel efficiency improvement targets exceeded.

  1. Solid state electrochromic light modulator

    DOEpatents

    Cogan, Stuart F.; Rauh, R. David

    1993-12-07

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  2. Solid state electrochromic light modulator

    DOEpatents

    Cogan, Stuart F.; Rauh, R. David

    1990-01-01

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  3. Damage tolerant light absorbing material

    DOEpatents

    Lauf, R.J.; Hamby, C. Jr.; Akerman, M.A.; Seals, R.D.

    1993-09-07

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, is prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000 C to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm[sup 3]. 9 figures.

  4. Damage tolerant light absorbing material

    DOEpatents

    Lauf, Robert J.; Hamby, Jr., Clyde; Akerman, M. Alfred; Seals, Roland D.

    1993-01-01

    A light absorbing article comprised of a composite of carbon-bonded carbon fibers, prepared by: blending carbon fibers with a carbonizable organic powder to form a mixture; dispersing the mixture into an aqueous slurry; vacuum molding the aqueous slurry to form a green article; drying and curing the green article to form a cured article; and, carbonizing the cured article at a temperature of at least about 1000.degree. C. to form a carbon-bonded carbon fiber light absorbing composite article having a bulk density less than 1 g/cm.sup.3.

  5. The Momentum of Light - A

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The theory of relativity suggested that the energy quanta of light should also be quanta of momentum as well. Yet the new quantum theories of the day were proving accurate even though the momenta of light quanta hadn't been accounted for. Would these quantum theories still prove accurate when momentum was included? A B C A. Momentum Any material object is a lump of energy. That is a major implication of Einstein's equation "E=mc2". Einstein showed how the mass of an object is a

  6. Electrostatically actuatable light modulating device

    DOEpatents

    Koehler, Dale R.

    1991-01-01

    The electrostatically actuatable light modulator utilizes an opaque substrate plate patterned with an array of aperture cells, the cells comprised of physically positionable dielectric shutters and electrostatic actuators. With incorporation of a light source and a viewing screen, a projection display system is effected. Inclusion of a color filter array aligned with the aperture cells accomplishes a color display. The system is realized in terms of a silicon based manufacturing technology allowing fabrication of a high resolution capability in a physically small device which with the utilization of included magnification optics allows both large and small projection displays.

  7. Solid state electrochromic light modulator

    DOEpatents

    Cogan, S.F.; Rauh, R.D.

    1990-07-03

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counter electrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films. 4 figs.

  8. Restoring Detroit's Street Lighting System

    SciTech Connect

    Kinzey, Bruce R.

    2015-10-21

    The City of Detroit is undertaking a comprehensive restoration of its street lighting system that includes transitioning the existing high-pressure sodium (HPS) sources to light-emitting diode (LED). Detroit’s well-publicized financial troubles over the last several years have added many hurdles and constraints to this process. Strategies to overcome these issues have largely been successful, but have also brought some mixed results. This document provides an objective review of the circumstances surrounding the system restoration, the processes undertaken and decisions made, and the results so far.

  9. SU-E-I-13: Evaluation of Metal Artifact Reduction (MAR) Software On Computed Tomography (CT) Images

    SciTech Connect

    Huang, V; Kohli, K

    2015-06-15

    Purpose: A new commercially available metal artifact reduction (MAR) software in computed tomography (CT) imaging was evaluated with phantoms in the presence of metals. The goal was to assess the ability of the software to restore the CT number in the vicinity of the metals without impacting the image quality. Methods: A Catphan 504 was scanned with a GE Optima RT 580 CT scanner (GE Healthcare, Milwaukee, WI) and the images were reconstructed with and without the MAR software. Both datasets were analyzed with Image Owl QA software (Image Owl Inc, Greenwich, NY). CT number sensitometry, MTF, low contrast, uniformity, noise and spatial accuracy were compared for scans with and without MAR software. In addition, an in-house made phantom was scanned with and without a stainless steel insert at three different locations. The accuracy of the CT number and metal insert dimension were investigated as well. Results: Comparisons between scans with and without MAR algorithm on the Catphan phantom demonstrate similar results for image quality. However, noise was slightly higher for the MAR algorithm. Evaluation of the CT number at various locations of the in-house made phantom was also performed. The baseline HU, obtained from the scan without metal insert, was compared to scans with the stainless steel insert at 3 different locations. The HU difference between the baseline scan versus metal scan was improved when the MAR algorithm was applied. In addition, the physical diameter of the stainless steel rod was over-estimated by the MAR algorithm by 0.9 mm. Conclusion: This work indicates with the presence of metal in CT scans, the MAR algorithm is capable of providing a more accurate CT number without compromising the overall image quality. Future work will include the dosimetric impact on the MAR algorithm.

  10. Information for Retailers of Lighting Products | Department of...

    Energy Saver

    Retailers of Lighting Products Information for Retailers of Lighting Products Information for Retailers of Lighting Products U.S. retailers who sell lighting products can use the...

  11. CNEEC - Nanophotonic Light Trapping Tutorial by Shanhui Fan

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Nanophotonic Light Trapping for Solar Cells

  12. Light modulated electron beam driven radiofrequency emitter

    DOEpatents

    Wilson, M.T.; Tallerico, P.J.

    1979-10-10

    The disclosure relates to a light modulated electron beam-driven radiofrequency emitter. Pulses of light impinge on a photoemissive device which generates an electron beam having the pulse characteristics of the light. The electron beam is accelerated through a radiofrequency resonator which produces radiofrequency emission in accordance with the electron, hence, the light pulses.

  13. Organic electroluminescent devices having improved light extraction

    DOEpatents

    Shiang, Joseph John

    2007-07-17

    Organic electroluminescent devices having improved light extraction include a light-scattering medium disposed adjacent thereto. The light-scattering medium has a light scattering anisotropy parameter g in the range from greater than zero to about 0.99, and a scatterance parameter S less than about 0.22 or greater than about 3.

  14. Today LED Holiday Lights, Tomorrow the World?

    SciTech Connect

    Gordon, Kelly L.

    2004-12-20

    This article for The APEM Advantage, the quarterly newsletter of the Association of Professional Energy Managers (APEM) describes the recent increase in the popularity of light emitting diode (LED) lighting and compares LED light output with that of incandescent and compact fluorescent lighting.

  15. National Synchrotron Light Source Activity Report 1998

    SciTech Connect

    Rothman, Eva

    1999-05-01

    National Synchrotron Light Source Activity Report for period October 1, 1997 through September 30, 1998

  16. Light modulated switches and radio frequency emitters

    DOEpatents

    Wilson, Mahlon T.; Tallerico, Paul J.

    1982-01-01

    The disclosure relates to a light modulated electron beam driven radiofrequency emitter. Pulses of light impinge on a photoemissive device which generates an electron beam having the pulse characteristics of the light. The electron beam is accelerated through a radiofrequency resonator which produces radiofrequency emission in accordance with the electron, hence, the light pulses.

  17. Nonimaging light concentrator with uniform irradiance

    DOEpatents

    Winston, Roland; Gee, Randy C.

    2003-04-01

    A nonimaging light concentrator system including a primary collector of light, an optical mixer disposed near the focal zone for collecting light from the primary collector, the optical mixer having a transparent entrance aperture, an internally reflective housing for substantially total internal reflection of light, a transparent exit aperture and an array of photovoltaic cells disposed near the transparent exit aperture.

  18. Metacapacitors for LED Lighting: Metacapacitors

    SciTech Connect

    2010-09-02

    ADEPT Project: The CUNY Energy Institute is developing less expensive, more efficient, smaller, and longer-lasting power converters for energy-efficient LED lights. LEDs produce light more efficiently than incandescent lights and last significantly longer than compact fluorescent bulbs, but they require more sophisticated power converter technology, which increases their cost. LEDs need more sophisticated converters because they require a different type of power (low voltage direct current, or DC) than what's generally supplied by power outlets. The CUNY Energy Institute is developing sophisticated power converters for LEDs that contain capacitors made from new, nanoscale materials. Capacitors are electrical components that are used to store energy. CUNY's unique capacitors are configured with advanced power circuits to more efficiently control and convert power to the LED lighting source. They also eliminate the need for large magnetic components, instead relying on networks of capacitors that can be easily printed on plastic substrate. CUNY's prototype LED power converter already meets DOE's 2020 projections for the energy efficiency of LED power converters.

  19. High Performance Outdoor Lighting Accelerator

    Energy.gov [DOE]

    Hosted by the U.S. Department of Energy (DOE)’s Weatherization and Intergovernmental Programs Office (WIPO), this webinar covered the expansion of the Better Buildings platform to include the newest initiative for the public sector: the High Performance Outdoor Lighting Accelerator (HPOLA).

  20. The light meson spectroscopy program

    SciTech Connect

    Smith, Elton S.

    2014-06-01

    Recent discoveries of a number of unexpected new charmomium-like meson states at the BaBar and Belle B-factories have demonstrated how little is still known about meson spectroscopy. In this talk we will review recent highlights of the light quark spectroscopy from collider and fixed target experiments.

  1. National Synchrotron Light Source II

    ScienceCinema

    Steve Dierker

    2010-01-08

    The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

  2. Lighting Up Georgia Convenience Stores

    Office of Energy Efficiency and Renewable Energy (EERE)

    Thanks to help from the Energy Department, convenience stores across Georgia are saving energy by switching to energy efficient lighting. In the first year alone, participating small businesses have saved over $7,000 after the retrofits and over 54,000 KWh of energy.

  3. Covered Product Category: Exterior Lighting

    Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories.

  4. Strategy Guideline: High Performance Residential Lighting

    SciTech Connect

    Holton, J.

    2012-02-01

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  5. Energy 101: Lighting Choices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Choices Energy 101: Lighting Choices Addthis Description In this edition of Energy 101, we discuss lighting choices. People have been using the same light bulb since Thomas Edison invented it about 130 years ago. Today, there are more lighting options in stores that will save you energy and money. Text Version Below is the text version for the Energy 101: Lighting Choices video: The video opens with "Energy 101: Lighting Choices." This is followed by shots of a variety of

  6. Illuminating system and method for specialized and decorative lighting using liquid light guides

    DOEpatents

    Zorn, Carl J.; Kross, Brian J.; Majewski, Stanislaw; Wojcik, Randolph F.

    1998-01-01

    The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

  7. Lighting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Administration's (BPA) Energy Smart Industrial (ESI) program has partnered with Northwest public utilities and the Northwest Trade Ally Network to help industrial facilities...

  8. LED Lighting Forecast | Department of Energy

    Energy Saver

    Research & Development » Technology Application R&D » LED Lighting Facts LED Lighting Facts LED lighting facts - A Program of the U.S. DOE DOE's LED Lighting Facts® program showcases LED products for general illumination from manufacturers who commit to testing products and reporting performance results according to industry standards. For lighting buyers, designers, and energy efficiency programs, the program provides information essential to evaluating SSL products. Central to the

  9. LED Outdoor Area Lighting Fact Sheet

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Outdoor Area Lighting LED technology is rapidly becoming competitive with high-intensity discharge light sources for outdoor area lighting. This document reviews the major design and specification concerns for outdoor area lighting, and discusses the potential for LED luminaires to save energy while providing high quality lighting for outdoor areas. Terms LCS - luminaire classification system for outdoor luminaires, published as an IESNA technical memorandum, TM-15-07. Addresses three zones of

  10. Connected Lighting Systems Streetscape | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lighting Systems Streetscape Connected Lighting Systems Streetscape Key barriers stand in the way of the potential benefits of connected lighting systems: Configuration complexity Lack of interoperability Unsatisfactory user experience When these barriers are overcome, connected lighting systems should help to optimize energy savings and improve quality of life. Here's how such a system might look... Connected lighting technologies present in an animated streetscape: Gateways bridge the

  11. Optical probe with light fluctuation protection

    DOEpatents

    Da Silva, Luiz B.; Chase, Charles L.

    2003-11-11

    An optical probe for tissue identification includes an elongated body. Optical fibers are located within the elongated body for transmitting light to and from the tissue. Light fluctuation protection is associated with the optical fibers. In one embodiment the light fluctuation protection includes a reflective coating on the optical fibers to reduce stray light. In another embodiment the light fluctuation protection includes a filler with very high absorption located within the elongated body between the optical fibers.

  12. Lighting and Daylighting Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homes & Buildings » Lighting and Daylighting Basics Lighting and Daylighting Basics August 15, 2013 - 5:05pm Addthis Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting. Learn more about: Lighting Daylighting Addthis Related Articles Daylighting Basics Energy 101: Daylighting The Biggest, Brightest Star of Energy Efficiency Energy Basics Home Renewable Energy Homes &

  13. Light extraction block with curved surface

    DOEpatents

    Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.

    2016-03-22

    Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.

  14. FINAL TECHNICAL REPORT, U.S. Department of Energy: Award No. DE-EE0002855 "Demonstrating the Commercial Feasibility of Geopressured-Geothermal Power Development at Sweet Lake Field - Cameron Parish, Louisiana"

    SciTech Connect

    Gayle, Phillip A., Jr.

    2012-01-13

    The goal of the project was to demonstrate the commercial feasibility of geopressured-geothermal power development by exploiting the extraordinarily high pressured hot brines know to exist at depth near the Sweet Lake oil and gas field in Cameron Parish, Louisiana. The existence of a geopressured-geothermal system at Sweet Lake was confirmed in the 1970's and 1980's as part of DOE's Geopressured-Geothermal Program. That program showed that the energy prices at the time could not support commercial production of the resource. Increased electricity prices and technological advancements over the last two decades, combined with the current national support for developing clean, renewable energy and the job creation it would entail, provided the justification necessary to reevaluate the commercial feasibility of power generation from this vast resource.

  15. Lighting fundamentals handbook: Lighting fundamentals and principles for utility personnel. Final report

    SciTech Connect

    Eley, C.; Tolen, T.; Benya, J.R.

    1992-12-01

    Lighting accounts for approximately 30% of overall electricity use and demand in commercial buildings. This handbook for utility personnel provides a source of basic information on lighting principles, lighting equipment, and other considerations related to lighting design. The handbook is divided into three parts. Part One, Physics of Light, has chapters on light, vision, optics, and photometry. Part Two, Lighting Equipment and Technology, focuses on lamps, luminaires, and lighting controls. Part Three, Lighting Design Decisions, deals with the manner in which lighting design decisions are made and reviews relevant methods and issues. These include the quantity and quality of light needed for visual tasks, calculation methods for verifying that lighting needs are satisfied, lighting economics and methods for evaluating investments in efficient lighting systems, and miscellaneous design issues including energy codes, power quality, photobiology, and disposal of lighting equipment. The handbook contains a discussion of the role of the utility in promoting the use of energy-efficient lighting. The handbook also includes a lighting glossary and a list of references for additional information. This convenient and comprehensive handbook is designed to enable utility lighting personnel to assist their customers in developing high-quality, energy-efficient lighting systems. The handbook is not intended to be an up-to-date reference on lighting products and equipment.

  16. Light-driven phase shifter

    DOEpatents

    Early, James W. (Los Alamos, NM)

    1990-01-01

    A light-driven phase shifter is provided for modulating a transmission light beam. A gaseous medium such as argon is provided with electron energy states excited to populate a metastable state. A tunable dye laser is selected with a wavelength effective to deplete the metastable electron state and may be intensity modulated. The dye laser is directed through the gaseous medium to define a first optical path having an index of refraction determined by the gaseous medium having a depleted metastable electron state. A transmission laser beam is also directed through the gaseous medium to define a second optical path at least partially coincident with the first optical path. The intensity of the dye laser beam may then be varied to phase modulate the transmission laser beam.

  17. Variable area light reflecting assembly

    DOEpatents

    Howard, T.C.

    1986-12-23

    Device is described for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles. 9 figs.

  18. Variable area light reflecting assembly

    DOEpatents

    Howard, Thomas C.

    1986-01-01

    Device for tracking daylight and projecting it into a building. The device tracks the sun and automatically adjusts both the orientation and area of the reflecting surface. The device may be mounted in either a wall or roof of a building. Additionally, multiple devices may be employed in a light shaft in a building, providing daylight to several different floors. The preferred embodiment employs a thin reflective film as the reflecting device. One edge of the reflective film is fixed, and the opposite end is attached to a spring-loaded take-up roller. As the sun moves across the sky, the take-up roller automatically adjusts the angle and surface area of the film. Additionally, louvers may be mounted at the light entrance to the device to reflect incoming daylight in an angle perpendicular to the device to provide maximum reflective capability when daylight enters the device at non-perpendicular angles.

  19. Porous light-emitting compositions

    DOEpatents

    Burrell, Anthony K.; McCleskey, Thomas Mark; Jia, Quanxi; Bauer, Eve; Mueller, Alexander H.

    2012-04-17

    Light-emitting devices are prepared by coating a porous substrate using a polymer-assisted deposition process. Solutions of metal precursor and soluble polymers having binding properties for metal precursor were coated onto porous substrates. The coated substrates were heated at high temperatures under a suitable atmosphere. The result was a substrate with a conformal coating that did not substantially block the pores of the substrate.

  20. Light shield for solar concentrators

    SciTech Connect

    Plesniak, Adam P.; Martins, Guy L.

    2014-08-26

    A solar receiver unit including a housing defining a recess, a cell assembly received in the recess, the cell assembly including a solar cell, and a light shield received in the recess and including a body and at least two tabs, the body defining a window therein, the tabs extending outward from the body and being engaged with the recess, wherein the window is aligned with the solar cell.