National Library of Energy BETA

Sample records for left axis world

  1. Sandia National Laboratories: AXIS

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Programs Authorized, Adversary Based Assessments (AXIS) AXIS Performing leading edge assessments since 1996 Banner Cyber Red Teaming Network Vulnerability Assessment and Penetration Testing h2 Authorized, Adversary Based Assessments Sandia's AXIS(tm) has been performing assessments since 1996 for a variety of customers including government, military, and commercial industry. Through its participation in a variety of government programs and leadership of industry conferences, the AXIS team has

  2. Vertical Axis Wind Turbine

    Energy Science and Technology Software Center

    2002-04-01

    Blade fatigue life is an important element in determining the economic viability of the Vertical-Axis Wind Turbine (VAWT). VAWT-SAL Vertical Axis Wind Turbine- Stochastic Aerodynamic Loads Ver 3.2 numerically simulates the stochastic (random0 aerodynamic loads of the Vertical-Axis Wind Turbine (VAWT) created by the atomspheric turbulence. The program takes into account the rotor geometry, operating conditions, and assumed turbulence properties.

  3. vertical axis wind turbine

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    vertical axis wind turbine - Sandia Energy Energy Search Icon Sandia Home Locations ... Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power ...

  4. DARHT: Dual-Axis Radiographic Hydrodynamic Test Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DARHT: Dual-Axis Radiographic Hydrodynamic Test Facility DARHT: Dual-Axis Radiographic Hydrodynamic Test Facility DARHT, supports a critical component of LANL's primary mission: to ensure the safety, security, and effectiveness of nuclear weapons in our nation's stockpile. Los Alamos scientists built DARHT, the world's most powerful x-ray machine, to analyze mockups of nuclear weapons. At the Los Alamos National Laboratory (LANL), the Dual-Axis Radiographic Hydrodynamic Test Facility, or DARHT,

  5. Vertical axis wind turbine

    SciTech Connect

    Kutcher, H.R.

    1984-05-15

    A Darrieus-type vertical axis wind turbine is disclosed which includes a vertically extending rotor tube mounted on a support structure with two or three rotor blades of troposkein configuration on the rotor tube for rotating the tube in response to wind energy and thereby drive a generator to produce electrical power. The turbine includes an erection hinge which permits assembly of the rotor tube and blades at close to ground level followed by upward hinging of the rotor assembly to a vertical position. It also includes a system for automatically lubricating the top bearing upon erection and a system for visually tensioning the guy cables.

  6. Vertical axis wind turbines

    DOEpatents

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij

    2011-03-08

    A vertical axis wind turbine is described. The wind turbine can include a top ring, a middle ring and a lower ring, wherein a plurality of vertical airfoils are disposed between the rings. For example, three vertical airfoils can be attached between the upper ring and the middle ring. In addition, three more vertical airfoils can be attached between the lower ring and the middle ring. When wind contacts the vertically arranged airfoils the rings begin to spin. By connecting the rings to a center pole which spins an alternator, electricity can be generated from wind.

  7. Left Coast Electric Formerly Left Coast Conversions | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Services Product: California-based company that provides services and products for electric cars. References: Left Coast Electric (Formerly Left Coast Conversions)1 This...

  8. Vertical axis wind turbine airfoil

    DOEpatents

    Krivcov, Vladimir; Krivospitski, Vladimir; Maksimov, Vasili; Halstead, Richard; Grahov, Jurij Vasiljevich

    2012-12-18

    A vertical axis wind turbine airfoil is described. The wind turbine airfoil can include a leading edge, a trailing edge, an upper curved surface, a lower curved surface, and a centerline running between the upper surface and the lower surface and from the leading edge to the trailing edge. The airfoil can be configured so that the distance between the centerline and the upper surface is the same as the distance between the centerline and the lower surface at all points along the length of the airfoil. A plurality of such airfoils can be included in a vertical axis wind turbine. These airfoils can be vertically disposed and can rotate about a vertical axis.

  9. Two-axis angular effector

    DOEpatents

    Vaughn, Mark R.; Robinett, III, Rush D.; Phelan, John R.; Van Zuiden, Don M.

    1997-01-21

    A new class of coplanar two-axis angular effectors. These effectors combine a two-axis rotational joint analogous to a Cardan joint with linear actuators in a manner to produce a wider range of rotational motion about both axes defined by the joint. This new class of effectors also allows design of robotic manipulators having very high strength and efficiency. These effectors are particularly suited for remote operation in unknown surroundings, because of their extraordinary versatility. An immediate application is to the problems which arise in nuclear waste remediation.

  10. THIS PAGE INTENTIONALLY LEFT BLANK

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    THIS PAGE INTENTIONALLY LEFT BLANK i U.S. DEPARTMENT OF ENERGY CRITICAL MATERIALS STRATEGY DECEMBER 2011 ii THIS PAGE INTENTIONALLY LEFT BLANK iii TABLE OF CONTENTS FOREWORD ........................................................................................................................................................... 1 ACKNOWLEDGEMENTS .......................................................................................................................................... 2 EXECUTIVE

  11. Three axis velocity probe system

    DOEpatents

    Fasching, George E.; Smith, Jr., Nelson S.; Utt, Carroll E.

    1992-01-01

    A three-axis velocity probe system for determining three-axis positional velocities of small particles in fluidized bed systems and similar applications. This system has a sensor head containing four closely-spaced sensing electrodes of small wires that have flat ends to establish a two axis plane, e.g. a X-Y plane. Two of the sensing electrodes are positioned along one of the axes and the other two are along the second axis. These four sensing electrodes are surrounded by a guard electrode, and the outer surface is a ground electrode and support member for the sensing head. The electrodes are excited by, for example, sinusoidal voltage having a peak-to-peak voltage of up to 500 volts at a frequency of 2 MHz. Capacitive currents flowing between the four sensing electrodes and the ground electrode are influenced by the presence and position of a particle passing the sensing head. Any changes in these currents due to the particle are amplified and synchronously detected to produce positional signal values that are converted to digital form. Using these digital forms and two values of time permit generation of values of the three components of the particle vector and thus the total velocity vector.

  12. Flexible helical-axis stellarator

    DOEpatents

    Harris, Jeffrey H.; Hender, Timothy C.; Carreras, Benjamin A.; Cantrell, Jack L.; Morris, Robert N.

    1988-01-01

    An 1=1 helical winding which spirals about a conventional planar, circular central conductor of a helical-axis stellarator adds a significant degree of flexibility by making it possible to control the rotational transform profile and shear of the magnetic fields confining the plasma in a helical-axis stellarator. The toroidal central conductor links a plurality of toroidal field coils which are separately disposed to follow a helical path around the central conductor in phase with the helical path of the 1=1 winding. This coil configuration produces bean-shaped magnetic flux surfaces which rotate around the central circular conductor in the same manner as the toroidal field generating coils. The additional 1=1 winding provides flexible control of the magnetic field generated by the central conductor to prevent the formation of low-order resonances in the rotational transform profile which can produce break-up of the equilibrium magnetic surfaces. Further, this additional winding can deepen the magnetic well which together with the flexible control provides increased stability.

  13. Dual Axis Radiographic Hydrodynamic Test Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DARHT DARHT Facility: A critical component of stockpile stewardship A new research frontier awaits! Our door is open and we thrive on mutually beneficial partnerships, collaborations that drive innovations and new technologies. April 12, 2012 Dominic Tafoya and Dave Honaberger prepare a refurbished DARHT (Dual Axis Radiographic Hydrotest Facility) 2nd axis accelerator cell for magnetic axis alignment measurements. Contact Group Leader Terry Priestley (505) 665-1330 Email Deputy Group Leader Tim

  14. Helical axis stellarator with noninterlocking planar coils

    DOEpatents

    Reiman, Allan; Boozer, Allen H.

    1987-01-01

    A helical axis stellarator using only noninterlocking planar, non-circular coils, generates magnetic fields having a magnetic well and large rotational transform with resultant large equilibrium beta.

  15. Dual Axis Radiographic Hydrodynamic Test Facility | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Dual Axis Radiographic Hydrodynamic Test Facility An integral part of the national hydrotest program, the DARHT is the world's most powerful x-ray machine. DARHT consists of two electron accelerators oriented at right angles to one another. Each accelerator creates a powerful electron beam that is focused onto a metal target which converts the kinetic energy of the electron beam into high energy x or gamma-rays. The x-ray dose from one DARHT accelerator is

  16. Vertical-axis wind-turbine program

    SciTech Connect

    Braasch, R.H.

    1981-01-01

    During the interval since the Fourth Biennial Wind Energy Conference, the vertical axis wind turbine program has experienced significant progress. The purpose of this paper is to review that progress in aerodynamics research, structural dynamics research, and machine development.

  17. Vertical Axis Wind Turbine Foundation parameter study

    SciTech Connect

    Lodde, P.F.

    1980-07-01

    The dynamic failure criterion governing the dimensions of prototype Vertical Axis Wind Turbine Foundations is treated as a variable parameter. The resulting change in foundation dimensions and costs is examined.

  18. Actuator assembly including a single axis of rotation locking member

    DOEpatents

    Quitmeyer, James N.; Benson, Dwayne M.; Geck, Kellan P.

    2009-12-08

    An actuator assembly including an actuator housing assembly and a single axis of rotation locking member fixedly attached to a portion of the actuator housing assembly and an external mounting structure. The single axis of rotation locking member restricting rotational movement of the actuator housing assembly about at least one axis. The single axis of rotation locking member is coupled at a first end to the actuator housing assembly about a Y axis and at a 90.degree. angle to an X and Z axis providing rotation of the actuator housing assembly about the Y axis. The single axis of rotation locking member is coupled at a second end to a mounting structure, and more particularly a mounting pin, about an X axis and at a 90.degree. angle to a Y and Z axis providing rotation of the actuator housing assembly about the X axis. The actuator assembly is thereby restricted from rotation about the Z axis.

  19. Aeroelastically coupled blades for vertical axis wind turbines

    DOEpatents

    Paquette, Joshua; Barone, Matthew F.

    2016-02-23

    Various technologies described herein pertain to a vertical axis wind turbine blade configured to rotate about a rotation axis. The vertical axis wind turbine blade includes at least an attachment segment, a rear swept segment, and optionally, a forward swept segment. The attachment segment is contiguous with the forward swept segment, and the forward swept segment is contiguous with the rear swept segment. The attachment segment includes a first portion of a centroid axis, the forward swept segment includes a second portion of the centroid axis, and the rear swept segment includes a third portion of the centroid axis. The second portion of the centroid axis is angularly displaced ahead of the first portion of the centroid axis and the third portion of the centroid axis is angularly displaced behind the first portion of the centroid axis in the direction of rotation about the rotation axis.

  20. Modular off-axis solar concentrator

    DOEpatents

    Plesniak, Adam P; Hall, John C

    2015-01-27

    A solar concentrator including a housing defining a vertical axis and including a receiving wall connected to a reflecting wall to define an internal volume and an opening into the internal volume, wherein the reflecting wall defines at least one primary optical element, and wherein at least a portion of the reflecting wall includes a layer of reflective material, the housing further including a cover connected to the receiving wall and the reflecting wall to seal the opening, and at least one receiver mounted on the receiving wall such that a vertical axis of the receiver is disposed at a non-zero angle relative to the vertical axis of the housing, the receiver including at least one photovoltaic cell.

  1. Enclosed, off-axis solar concentrator

    DOEpatents

    Benitez, Pablo; Grip, Robert E; Minano, Juan C; Narayanan, Authi A; Plesniak, Adam; Schwartz, Joel A

    2013-11-26

    A solar concentrator including a housing having receiving wall, a reflecting wall and at least two end walls, the receiving, reflecting and end walls defining a three-dimensional volume having an inlet, wherein a vertical axis of the housing is generally perpendicular to the inlet, a receiver mounted on the receiving wall of the housing, the receiver including at least one photovoltaic cell, wherein a vertical axis of the receiver is disposed at a non-zero angle relative to the vertical axis of the housing, at least one clip disposed on the reflecting wall an optical element received within the three-dimensional volume, the optical element including at least one tab, the tab being engaged by the clip to align the optical element with the receiver, and a window received over the inlet to enclose the housing.

  2. Two-axis tracking solar collector mechanism

    SciTech Connect

    Johnson, K.C.

    1990-11-06

    This patent describes a tracking solar collector mechanism. It comprises: a stationary base structure which supports the tracking components; two parallel rows of uniformly spaced axial polar bearings attached to the base structure, each row comprising at least one bearing, wherein each member bearing of each row is coaligned with an associated bearing of the other row, the line joining each pair of coaligned polar bearings defining an associated polar tracking axis wherein the pair's polar axes are mutually parallel and are adapted to be aligned with the Earth's axis; at least one tracking module, each of which is supported by and turns on one of the pairs of coaligned polar bearings.

  3. High payload six-axis load sensor

    DOEpatents

    Jansen, John F.; Lind, Randall F.

    2003-01-01

    A repairable high-payload six-axis load sensor includes a table, a base, and at least three shear-pin load transducers removably mounted between the table and the base. Removable mounting permits easy replacement of damaged shear pins. Preferably, the shear-pin load transducers are responsive to shear forces imparted along the two axes perpendicular to an axis of minimum sensitivity characteristic of the transducer. Responsive to an applied shear force, each shear-pin load transducer can produce an electrical signal proportional to the reaction force. The load sensor can further include a structure for receiving the proportional electrical signals and computing the applied load corresponding to the proportional electrical signals. The computed load can be expressed in terms of a three-dimensional XYZ Cartesian coordinate system.

  4. Figure 4 (left).jpg | OSTI, US Dept of Energy Office of Scientific and

    Office of Scientific and Technical Information (OSTI)

    Technical Information (left)

  5. Offshore Ambitions for the Vertical-Axis Wind Turbine

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Ambitions for the Vertical-Axis Wind Turbine - Sandia Energy Energy Search Icon Sandia ... Offshore Ambitions for the Vertical-Axis Wind Turbine HomeEnergy, News, News & Events, ...

  6. Three-axis asymmetric radiation detector system

    DOEpatents

    Martini, Mario Pierangelo (Oak Ridge, TN); Gedcke, Dale A. (Oak Ridge, TN); Raudorf, Thomas W. (Oak Ridge, TN); Sangsingkeow, Pat (Knoxville, TN)

    2000-01-01

    A three-axis radiation detection system whose inner and outer electrodes are shaped and positioned so that the shortest path between any point on the inner electrode and the outer electrode is a different length whereby the rise time of a pulse derived from a detected radiation event can uniquely define the azimuthal and radial position of that event, and the outer electrode is divided into a plurality of segments in the longitudinal axial direction for locating the axial location of a radiation detection event occurring in the diode.

  7. World Crude Oil Prices

    Energy Information Administration (EIA) (indexed site)

    World Crude Oil Prices (Dollars per Barrel) The data on this page are no longer available.

  8. WCI - World Consensus Initiative

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World Consensus Initiative 2005 Workshop Recap WCI 2004 Website WCI Book Contributed Papers

  9. Vertical-Axis Wind Turbine Mesh Generator

    SciTech Connect

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitates specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.

  10. Vertical-Axis Wind Turbine Mesh Generator

    Energy Science and Technology Software Center

    2014-01-24

    VAWTGen is a mesh generator for creating a finite element beam mesh of arbitrary vertical-axis wind turbines (VAWT). The software accepts input files specifying tower and blade structural and aerodynamic descriptions and constructs a VAWT using a minimal set of inputs. VAWTs with an arbitrary number of blades can be constructed with or without a central tower. Strut connections between the tower and blades can be specified in an arbitrary manner. The software also facilitatesmore » specifying arbitrary joints between structural components and concentrated structural tenns (mass and stiffness). The output files which describe the VAWT configuration are intended to be used with the Offshore Wind ENergy Simulation (OWENS) Toolkit software for structural dynamics analysis of VAWTs. Furthermore, VAWTGen is useful for visualizing output from the OWENS analysis software.« less

  11. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, K.C.

    1992-12-08

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion. 16 figs.

  12. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, Kenneth C.

    1992-01-01

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion.

  13. Two-axis tracking solar collector mechanism

    DOEpatents

    Johnson, Kenneth C.

    1990-01-01

    This invention is a novel solar tracking mechanism incorporating a number of practical features that give it superior environmental resilience and exceptional tracking accuracy. The mechanism comprises a lightweight space-frame assembly supporting an array of point-focus Fresnel lenses in a two-axis tracking structure. The system is enclosed under a glass cover which isolates it from environmental exposure and enhances tracking accuracy by eliminating wind loading. Tracking accuracy is also enhanced by the system's broad-based tracking support. The system's primary intended application would be to focus highly concentrated sunlight into optical fibers for transmission to core building illumination zones, and the system may also have potential for photovoltaic or photothermal solar energy conversion.

  14. Vertical axis wind turbine control strategy

    SciTech Connect

    McNerney, G.M.

    1981-08-01

    Early expensive in automatic operation of the Sandia 17-m vertical axis research wind turbine (VAWT) has demonstrated the need for a systematic study of control algorithms. To this end, a computer model has been developed that uses actual wind time series and turbine performance data to calculate the power produced by the Sandia 17-m VAWT operating in automatic control. The model has been used to investigate the influence of starting algorithms on annual energy production. The results indicate that, depending on turbine and local wind characteristics, a bad choice of a control algorithm can significantly reduce overall energy production. The model can be used to select control algorithms and threshold parameters that maximize long-term energy production. An attempt has been made to generalize these results from local site and turbine characteristics to obtain general guidelines for control algorithm design.

  15. World oil trends

    SciTech Connect

    Anderson, A. )

    1991-01-01

    This book provides data on many facets of the world oil industry topics include; oil consumption; oils share of energy consumption; crude oil production; natural gas production; oil reserves; prices of oil; world refining capacity; and oil tankers.

  16. WORLD EDITOR TRAINING GUIDE

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    WORLD EDITOR TRAINING GUIDE Doc number: ESD-12-P19313 Revision: 1.0, April 2013 World Editor Training Guide April 2013 i . CONTENTS CONTENTS ............................................................................................................................... I INTRODUCTION .....................................................................................................................1 Learning Objectives

  17. World Bio Markets

    Energy.gov [DOE]

    Held in Amsterdam, Netherlands, the 10th anniversary World Bio Markets convened from March 1– 4, 2015.

  18. Swipe Left, Power Down: Using Interactive Media to Instill Behavior...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301) June 9

  19. Left-Wing Extremism: The Current Threat

    SciTech Connect

    Karl A. Seger

    2001-04-30

    Left-wing extremism is ''alive and well'' both in the US and internationally. Although the current domestic terrorist threat within the U. S. is focused on right-wing extremists, left-wing extremists are also active and have several objectives. Leftist extremists also pose an espionage threat to U.S. interests. While the threat to the U.S. government from leftist extremists has decreased in the past decade, it has not disappeared. There are individuals and organizations within the U.S. who maintain the same ideology that resulted in the growth of left-wing terrorism in this country in the 1970s and 1980s. Some of the leaders from that era are still communicating from Cuba with their followers in the U.S., and new leaders and groups are emerging.

  20. Off-Axis Parabola Inserter - Laboratory for Laser Energetics

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Axis Parabola Inserter - Laboratory for Laser Energetics Laboratory for Laser Energetics Logo Search Home Around the Lab Past Issues Past Quick Shots About Office of the Director ...

  1. MHK Technologies/Horizontal Axis Logarithmic Spiral Turbine ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Horizontal Axis Logarithmic Spiral Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Primary Organization Golden...

  2. Bertram Brockhouse, the Triple-axis Spectrometer, and Neutron...

    Office of Scientific and Technical Information (OSTI)

    Bertram Brockhouse, the Triple-axis Spectrometer, and Neutron Spectroscopy Resources with Additional Information Bertram Brockhouse Courtesy of McMaster University Bertram...

  3. Bertram Brockhouse, the Triple-axis Spectrometer, and Neutron...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Bertram Brockhouse, the Triple-axis Spectrometer, and Neutron Spectroscopy Resources with Additional Information Bertram Brockhouse Courtesy of McMaster University Bertram ...

  4. Solasta aka The Eagle Axis | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Zip: 2458 Sector: Efficiency, Solar Product: Start-up planning to produce high-efficiency solar cells using nanoscale elements. References: Solasta (aka The Eagle Axis)1 This...

  5. Three-axis particle impact probe

    DOEpatents

    Fasching, George E.; Smith, Jr., Nelson S.; Utt, Carroll E.

    1992-01-01

    Three-axis particle impact probes detect particle impact vectors along x-, y-, and z-axes by spherical probe head mounted on the outer end of a shaft that is flexibly mounted in silicone rubber at the top of a housing so as to enable motion imparted to the head upon impact to be transmitted to a grounded electrode secured to the shaft within the housing. Excitable electrodes are mounted in the housing in a fixed position, spaced apart from the ground electrode and forming, with the ground electrode, capacitor pairs. Movement of the ground electrode results in changes in capacitance, and these difference in capacitance are used for measurement or derivation of momentum vectors along each of the three axes. In one embodiment, the ground electrode is mounted at the base of the shaft and is secured to a silicone rubber layer at the top of the housing, providing for cantilevered movement. In another embodiment, the shaft is mounted at its mid point in a flexible bushing so that it undergoes pivotal movement around that point.

  6. Control system for a vertical axis windmill

    DOEpatents

    Brulle, Robert V.

    1983-10-18

    A vertical axis windmill having a rotating structure is provided with a series of articulated vertical blades whose positions are controlled to maintain a constant RPM for the rotating structure, when wind speed is sufficient. A microprocessor controller is used to process information on wind speed, wind direction and RPM of the rotating structure to develop an electrical signal for establishing blade position. The preferred embodiment of the invention, when connected to a utility grid, is designed to generate 40 kilowatts of power when exposed to a 20 mile per hour wind. The control system for the windmill includes electrical blade actuators that modulate the blades of the rotating structure. Blade modulation controls the blade angle of attack, which in turn controls the RPM of the rotor. In the preferred embodiment, the microprocessor controller provides the operation logic and control functions. A wind speed sensor provides inputs to start or stop the windmill, and a wind direction sensor is used to keep the blade flip region at 90.degree. and 270.degree. to the wind. The control system is designed to maintain constant rotor RPM when wind speed is between 10 and 40 miles per hour.

  7. Yaw dynamics of horizontal axis wind turbines

    SciTech Connect

    Hansen, A.C. )

    1992-05-01

    Designers of a horizontal axis wind turbine yaw mechanism are faced with a difficult decision. They know that if they elect to use a yaw- controlled rotor then the system will suffer increased initial cost and increased inherent maintenance and reliability problems. On the other hand, if they elect to allow the rotor to freely yaw they known they will have to account for unknown and random, though bounded, yaw rates. They will have a higher-risk design to trade-off against the potential for cost savings and reliability improvement. The risk of a yaw-free system could be minimized if methods were available for analyzing and understanding yaw behavior. The complexity of yaw behavior has, until recently, discouraged engineers from developing a complete yaw analysis method. The objectives of this work are to (1) provide a fundamental understanding of free-yaw mechanics and the design concepts most effective at eliminating yaw problems, and (2) provide tested design tools and guidelines for use by free-yaw wind systems manufacturers. The emphasis is on developing practical and sufficiently accurate design methods.

  8. Spin-stabilized magnetic levitation without vertical axis of rotation

    DOEpatents

    Romero, Louis; Christenson, Todd; Aaronson, Gene

    2009-06-09

    The symmetry properties of a magnetic levitation arrangement are exploited to produce spin-stabilized magnetic levitation without aligning the rotational axis of the rotor with the direction of the force of gravity. The rotation of the rotor stabilizes perturbations directed parallel to the rotational axis.

  9. DARHT status and preparations for dual-axis hydrotesting (u)

    SciTech Connect

    Bowman, David W

    2010-01-01

    The status of the DARHT facility, including a history of events that have taken place since the end of the DARHT Second Axis Refurbishment Project, is discussed. Technical and operational enhancements that have been made will be addressed, and recent technical challenges, such as the RF noise in the kicker region, are discussed. Historical data on reliability of the second axis is discussed, as well as operational changes made to enhance reliability. In addition, the path forward for integrating the second axis into overall DARHT operations in preparation for a hydrotest is addressed. Timing integration tests are accompanied by a series of tests to evaluate neutron contamination and cross-axis scatter, with attempts being made to provide adequate shielding to minimize the effects of neutrons and cross-beam scatter. The discussion includes results of the testing performed to-date, and concludes with a discussion of the path forward for dual-axis hydrotesting at DARHT.

  10. Off-axis illumination direct-to-digital holography

    DOEpatents

    Thomas, Clarence E.; Price, Jeffery R.; Voelkl, Edgar; Hanson, Gregory R.

    2004-06-08

    Systems and methods are described for off-axis illumination direct-to-digital holography. A method of recording an off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis, includes: reflecting a reference beam from a reference mirror at a non-normal angle; reflecting an object beam from an object at an angle with respect to an optical axis defined by a focusing lens; focusing the reference beam and the object beam at a focal plane of a digital recorder to form the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; digitally recording the off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; Fourier analyzing the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes by transforming axes of the recorded off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes in Fourier space to sit on top of a heterodyne carrier frequency defined as an angle between the reference beam and the object beam; applying a digital filter to cut off signals around an original origin; and then performing an inverse Fourier transform.

  11. EIS-0228: Dual Axis Radiographic Hydrodynamic Test (DARHT) Facility

    Energy.gov [DOE]

    This EIS evaluates the potential environmental impact of a proposal to construct and operate the Dual Axis Radiographic Hydrodynamic Test (DARHT) facility at Los Alamos National Laboratory (LANL)...

  12. Roger Road Reservoir Single-Axis Photovoltaic Array

    Office of Energy Efficiency and Renewable Energy (EERE)

    In this photograph, the Roger Road Reclamation Water Reservoir features a 110-kilowatt (kW) solar array. This system was built on a reservoir deck as its special design allowed for a single-axis...

  13. Determination of Elastic Twist in Horizontal Axis Wind Turbines (HAWTs)

    SciTech Connect

    Stoddard, F.; Nelson, V.; Starcher, K.; Andrews, B.

    2006-06-01

    This report presents the results of a project at the Alternative Energy Institute (AEI) which measured and calculated the elastic twist of three representative composite horizontal-axis blades: Carter 300, Gougeon ESI 54, and UTRC 8 kW.

  14. IEO2016 World Chapter

    Gasoline and Diesel Fuel Update

    ... gas (2.7%), nuclear power (2.4%), and coal (0.8%). Government policies and incentives throughout the world support the rapid construction of renewable generation facilities. ...

  15. the World Wide Web

    Office of Scientific and Technical Information (OSTI)

    technical report has been made electronically available on the World Wide Web through a contribution from Walter L. Warnick In honor of Enrico Fermi Leader of the first nuclear ...

  16. World Bio Markets

    Energy.gov [DOE]

    The World Bio Markets meeting will held from March 14-17, 2016 in Amsterdam, Netherlands. The meeting will gather experts in the bioenergy industry from all over the world. Bioenergy Technologies Office Demonstration and Market Transformation Program Manager Jim Spaeth will be giving a presentation entitled, “Policy updates and outlooks from key biofuel markets,” and will discuss technical, policy and investment developments, and success stories.

  17. Plasma ionization frequency, edge-to-axis density ratio, and density on axis of a cylindrical gas discharge

    SciTech Connect

    Palacio Mizrahi, J. H.

    2014-06-15

    A rigorous derivation of expressions, starting from the governing equations, for the ionization frequency, edge-to-axis ratio of plasma density, plasma density at the axis, and radially averaged plasma density in a cylindrical gas discharge has been obtained. The derived expressions are simple and involve the relevant parameters of the discharge: Cylinder radius, axial current, and neutral gas pressure. The found expressions account for ion inertia, ion temperature, and changes in plasma ion collisionality.

  18. Measurement of a part having a known axis misalignment

    SciTech Connect

    Castleton, R.

    1993-05-01

    It has been shown that undetected misalignment of the axis of a part can lead to unacceptable measurement errors. For this technical note, it is assumed that the axis misalignment has been determined, and that polar sweeps are used to measure the part. The proposed polar sweeps run vertically (ignoring the axis misalignment) between a plane that is parallel to the bottom datum surface of the part and a second such plane that is close to the pole of the part. No attempt is made to correct for axis misalignment by rotation of the part during the measurement sweeps. It is apparent that the distance traveled along the measurement sweep is more than the arc length representing the actual change in elevation in the part coordinate system. It is proposed that the measurement of the part on the vertical path be used as the measurement of the part on the base longitude line. This introduces an error, {delta}{theta}, in the sensitive direction that corresponds to the arc length B-S. It is shown that this error is not significant when the axis misalignment is small.

  19. Electrical generation using a vertical-axis wind turbine

    SciTech Connect

    Clark, R.N.

    1982-12-01

    Traditionally, windmills have been of the propeller or multiblade types, both of which have their rotational axis parallel to the flow of the wind. A vertical-axis wind turbine has its rotational axis perpendicular to the flow of wind and requires no orientation to keep the rotor in the windstream. The vertical-axis wind turbine operates on the same principle as an airfoil and produces lift and drag as any airfoil. A newly designed 100-kW vertical-axis wind turbine has been operated for one year at the USDA Conservation and Production Research Laboratory, Bushland, TX. The turbine has an induction generator and supplies power to a sprinkler irrigation system with excess power being sold to the electric utility. The turbine begins producing power at 5.5 m/s windspeed and reaches its rated output of 100-kW at 15 m/s. The unit has obtained a peak efficiency of 48% at a windspeed of 8 m/s or 81% of theoretical maximum. Using 17 years of windspeed data from the National Weather Service, the annual energy output is estimated at 200,000 kWh. The unit has experienced several operational problems during its initial testing. Guy cables were enlarged to provide greater stiffness to reduce blade stress levels, lightning shorted the main contactor, and the brake system required a complete redesign and modification. The turbine was operational about 60% of the time.

  20. Sunergy World | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Jump to: navigation, search Name: Sunergy World Place: Boise, Idaho Zip: 83707 Sector: Solar, Wind energy Product: Idaho-based wind and solar project developer. References:...

  1. World Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Energy Name: World Energy Address: 2 Constitution Center Place: Boston, Massachusetts Zip: 02129 Region: Greater Boston Area Sector: Biofuels Product: Provider of biodiesel...

  2. Celebrating the Completion of the World's Largest Concentrating Solar Power

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Plant | Department of Energy the Completion of the World's Largest Concentrating Solar Power Plant Celebrating the Completion of the World's Largest Concentrating Solar Power Plant February 13, 2014 - 9:21am Addthis Aerial view, Ivanpah 1 of 5 Aerial view, Ivanpah An aerial view of the Ivanpah Solar Power Facility at sunrise, with left to right Tower 1, 2 and 3. Image: Gilles Mingasson/Getty Images for Bechtel Harnessing the Power of the Sun 2 of 5 Harnessing the Power of the Sun The top of

  3. Registration of the rotation axis in X-ray tomography

    SciTech Connect

    Yang, Yimeng; Yang, Feifei; Hingerl, Ferdinand F.; Xiao, Xianghui; Liu, Yijin; Wu, Ziyu; Benson, Sally M.; Toney, Michael F.; Andrews, Joy C.; Pianetta, Piero A.

    2015-01-01

    There is high demand for efficient, robust and automated routines for tomographic data reduction, particularly for synchrotron data. Registration of the rotation axis in data processing is a critical step affecting the quality of the reconstruction and is not easily implemented with automation. Existing methods for calculating the center of rotation have been reviewed and an improved algorithm to register the rotation axis in tomographic data is presented. The performance of the proposed method is evaluated using synchrotron-based microtomography data on geological samples with and without artificial reduction of the signal-to-noise ratio. The proposed method improves the reconstruction quality by correcting both the tilting error and the translational offset of the rotation axis. The limitation of this promising method is also discussed.

  4. The Brave Nu World

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Brave Nu World Andre de Gouvea Northwestern April 27, 2016 4:00 p.m. - Wilson Hall, One West I review the current theoretical and phenomenological status of neutrino physics. I will discuss our current understanding of neutrino properties, open questions, some new physics ideas behind nonzero neutrino masses, and the challenges of piecing together the neutrino mass puzzle. I will also comment on the new physics reach of the current and the next generation of neutrino oscillation experiments

  5. World Natural Gas Model

    Energy Science and Technology Software Center

    1994-12-01

    RAMSGAS, the Research and Development Analysis Modeling System World Natural Gas Model, was developed to support planning of unconventional gaseoues fuels research and development. The model is a scenario analysis tool that can simulate the penetration of unconventional gas into world markets for oil and gas. Given a set of parameter values, the model estimates the natural gas supply and demand for the world for the period from 1980 to 2030. RAMSGAS is based onmore » a supply/demand framwork and also accounts for the non-renewable nature of gas resources. The model has three fundamental components: a demand module, a wellhead production cost module, and a supply/demand interface module. The demand for gas is a product of total demand for oil and gas in each of 9 demand regions and the gas share. Demand for oil and gas is forecast from the base year of 1980 through 2030 for each demand region, based on energy growth rates and price-induced conservation. For each of 11 conventional and 19 unconventional gas supply regions, wellhead production costs are calculated. To these are added transportation and distribution costs estimates associated with moving gas from the supply region to each of the demand regions and any economic rents. Based on a weighted average of these costs and the world price of oil, fuel shares for gas and oil are computed for each demand region. The gas demand is the gas fuel share multiplied by the total demand for oil plus gas. This demand is then met from the available supply regions in inverse proportion to the cost of gas from each region. The user has almost complete control over the cost estimates for each unconventional gas source in each year and thus can compare contributions from unconventional resources under different cost/price/demand scenarios.« less

  6. View on world market

    SciTech Connect

    Poulsen, J.

    1996-12-31

    Opinions on the world market for wind power are presented in this paper. Reasons contributing to a potential growth in wind power are cited. Increased demand is expected to arise due to increased energy needs and environmental concerns. Barriers, primarily political, to the development of wind energy are assessed. Development is predicted to occur first in countries with a demand for new capacity and political decisions to protect the environment.

  7. Dual Axis Radiographic Hydrodynamic Test | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Dual Axis Radiographic Hydrodynamic Test NNSA releases Stockpile Stewardship Program quarterly experiments summary WASHIGTON, DC. - The National Nuclear Security Administration today released its current quarterly summary of experiments conducted as part of its science-based Stockpile Stewardship Program. The experiments carried out within the program are used in combination with complex computational models

  8. Structural dynamic response characteristics of Darrieus vertical axis wind turbines

    SciTech Connect

    Sullivan, W.N.

    1981-01-01

    A brief summary of the efforts now underway in the area of the structural dynamics of vertical axis wind turbines is given. The emphasis is on discussing the status of analytical tools, the quantity and quality of existing experimental confirmation data, and the implications structural dynamic issues have on rotor design.

  9. Vertical-axis wind turbines -- The current status of an old technology

    SciTech Connect

    Berg, D.E.

    1996-12-31

    Vertical-axis wind turbine technology is not well understood, even though the earliest wind machines rotated about a vertical axis. The operating environment of a vertical-axis wind turbine is quite complex, but detailed analysis capabilities have been developed and verified over the last 30 years. Although vertical-axis technology has not been widely commercialized, it exhibits both advantages and disadvantages compared to horizontal-axis technology, and in some applications, it appears to offer significant advantages.

  10. DARHT Axis-I Diode Simulations II: Geometrical Scaling

    SciTech Connect

    Ekdahl, Carl A. Jr.

    2012-06-14

    Flash radiography of large hydrodynamic experiments driven by high explosives is a venerable diagnostic technique in use at many laboratories. Many of the largest hydrodynamic experiments study mockups of nuclear weapons, and are often called hydrotests for short. The dual-axis radiography for hydrodynamic testing (DARHT) facility uses two electron linear-induction accelerators (LIA) to produce the radiographic source spots for perpendicular views of a hydrotest. The first of these LIAs produces a single pulse, with a fixed {approx}60-ns pulsewidth. The second axis LIA produces as many as four pulses within 1.6-{micro}s, with variable pulsewidths and separation. There are a wide variety of hydrotest geometries, each with a unique radiographic requirement, so there is a need to adjust the radiographic dose for the best images. This can be accomplished on the second axis by simply adjusting the pulsewidths, but is more problematic on the first axis. Changing the beam energy or introducing radiation attenuation also changes the spectrum, which is undesirable. Moreover, using radiation attenuation introduces significant blur, increasing the effective spot size. The dose can also be adjusted by changing the beam kinetic energy. This is a very sensitive method, because the dose scales as the {approx}2.8 power of the energy, but it would require retuning the accelerator. This leaves manipulating the beam current as the best means for adjusting the dose, and one way to do this is to change the size of the cathode. This method has been proposed, and is being tested. This article describes simulations undertaken to develop scaling laws for use as design tools in changing the Axis-1 beam current by changing the cathode size.

  11. World Energy Projection System Plus Model Documentation: World Electricity Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Electricity Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  12. WATER-TRAPPED WORLDS

    SciTech Connect

    Menou, Kristen [Department of Astronomy, Columbia University, 550 West 120th Street, New York, NY 10027 (United States)

    2013-09-01

    Although tidally locked habitable planets orbiting nearby M-dwarf stars are among the best astronomical targets to search for extrasolar life, they may also be deficient in volatiles and water. Climate models for this class of planets show atmospheric transport of water from the dayside to the nightside, where it is precipitated as snow and trapped as ice. Since ice only slowly flows back to the dayside upon accumulation, the resulting hydrological cycle can trap a large amount of water in the form of nightside ice. Using ice sheet dynamical and thermodynamical constraints, I illustrate how planets with less than about a quarter the Earth's oceans could trap most of their surface water on the nightside. This would leave their dayside, where habitable conditions are met, potentially dry. The amount and distribution of residual liquid water on the dayside depend on a variety of geophysical factors, including the efficiency of rock weathering at regulating atmospheric CO{sub 2} as dayside ocean basins dry up. Water-trapped worlds with dry daysides may offer similar advantages as land planets for habitability, by contrast with worlds where more abundant water freely flows around the globe.

  13. World Biofuels Study

    SciTech Connect

    Alfstad,T.

    2008-10-01

    This report forms part of a project entitled 'World Biofuels Study'. The objective is to study world biofuel markets and to examine the possible contribution that biofuel imports could make to help meet the Renewable Fuel Standard (RFS) of the Energy Independence and Security Act of 2007 (EISA). The study was sponsored by the Biomass Program of the Assistant Secretary for Energy Efficiency and Renewable Energy (EERE), U.S. Department of Energy. It is a collaborative effort among the Office of Policy and International Affairs (PI), Department of Energy and Oak Ridge National Laboratory (ORNL), National Renewable Energy Laboratory (NREL) and Brookhaven National Laboratory (BNL). The project consisted of three main components: (1) Assessment of the resource potential for biofuel feedstocks such as sugarcane, grains, soybean, palm oil and lignocellulosic crops and development of supply curves (ORNL). (2) Assessment of the cost and performance of biofuel production technologies (NREL). (3) Scenario-based analysis of world biofuel markets using the ETP global energy model with data developed in the first parts of the study (BNL). This report covers the modeling and analysis part of the project conducted by BNL in cooperation with PI. The Energy Technology Perspectives (ETP) energy system model was used as the analytical tool for this study. ETP is a 15 region global model designed using the MARKAL framework. MARKAL-based models are partial equilibrium models that incorporate a description of the physical energy system and provide a bottom-up approach to study the entire energy system. ETP was updated for this study with biomass resource data and biofuel production technology cost and performance data developed by ORNL and NREL under Tasks 1 and 2 of this project. Many countries around the world are embarking on ambitious biofuel policies through renewable fuel standards and economic incentives. As a result, the global biofuel demand is expected to grow very rapidly over

  14. Wind World | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wind World Place: Denmark Sector: Wind energy Product: WindWorld was a turbine manufacturer that was purchased by NEG Micon in 1998. NEG Micon was then purchased by Vestas in 2003....

  15. VERSATILE TWO-AXIS OPEN-LOOP SOLAR TRACKER CONTROLLER*

    SciTech Connect

    Ward, Christina D; Maxey, L Curt; Evans III, Boyd Mccutchen; Lapsa, Melissa Voss

    2008-01-01

    A versatile single-board controller for two-axis solar tracking applications has been developed and tested on operating solar tracking systems with over two years of field experience. The operating experience gained from the two systems and associated modifications are discussed as representative examples of the practical issues associated with implementing a new two-axis solar tracker design. In this research, open and closed loop control methods were evaluated; however, only the open loop method met the 0.125 tracking accuracy requirement and the requirement to maintain pointing accuracy in hazy and scattered cloudy skies. The open loop algorithm was finally implemented in a microcontroller-based tracking system. Methods of applying this controller hardware to different tracker geometries and hardware are discussed along with the experience gained to date.

  16. Tuning the DARHT Axis-II linear induction accelerator focusing

    SciTech Connect

    Ekdahl, Carl A.

    2012-04-24

    Flash radiography of large hydrodynamic experiments driven by high explosives is a well-known diagnostic technique in use at many laboratories, and the Dual-Axis Radiography for Hydrodynamic Testing (DARHT) facility at Los Alamos produces flash radiographs of large hydrodynamic experiments. Two linear induction accelerators (LIAs) make the bremsstrahlung radiographic source spots for orthogonal views of each test. The 2-kA, 20-MeV Axis-I LIA creates a single 60-ns radiography pulse. The 1.7-kA, 16.5-MeV Axis-II LIA creates up to four radiography pulses by kicking them out of a longer pulse that has a 1.6-{mu}s flattop. The Axis-II injector, LIA, kicker, and downstream transport (DST) to the bremsstrahlung converter are described. Adjusting the magnetic focusing and steering elements to optimize the electron-beam transport through an LIA is often called 'tuning.' As in all high-current LIAs, the focusing field is designed to be as close to that of the ideal continuous solenoid as physically possible. In ideal continuous solenoidal transport a smoothly varying beam size can easily be found for which radial forces balance, and the beam is said to be 'matched' to the focusing field. A 'mismatched' beam exhibits unwanted oscillations in size, which are a source of free energy that contributes to emittance growth. This is undesirable, because in the absence of beam-target effects, the radiographic spot size is proportional to the emittance. Tuning the Axis-II LIA is done in two steps. First, the solenoidal focusing elements are set to values designed to provide a matched beam with little or no envelope oscillations, and little or no beam-breakup (BBU) instability growth. Then, steering elements are adjusted to minimize the motion of the centroid of a well-centered beam at the LIA exit. This article only describes the design of the tune for the focusing solenoids. The DARHT Axis-II LIA was required to be re-tuned after installing an accelerator cell to replace a failed

  17. On the spin-axis dynamics of a Moonless Earth

    SciTech Connect

    Li, Gongjie; Batygin, Konstantin

    2014-07-20

    The variation of a planet's obliquity is influenced by the existence of satellites with a high mass ratio. For instance, Earth's obliquity is stabilized by the Moon and would undergo chaotic variations in the Moon's absence. In turn, such variations can lead to large-scale changes in the atmospheric circulation, rendering spin-axis dynamics a central issue for understanding climate. The relevant quantity for dynamically forced climate change is the rate of chaotic diffusion. Accordingly, here we re-examine the spin-axis evolution of a Moonless Earth within the context of a simplified perturbative framework. We present analytical estimates of the characteristic Lyapunov coefficient as well as the chaotic diffusion rate and demonstrate that even in absence of the Moon, the stochastic change in Earth's obliquity is sufficiently slow to not preclude long-term habitability. Our calculations are consistent with published numerical experiments and illustrate the putative system's underlying dynamical structure in a simple and intuitive manner.

  18. X- And y-axis driver for rotating microspheres

    DOEpatents

    Weinstein, Berthold W.

    1979-01-01

    Apparatus for precise control of the motion and position of microspheres for examination of their interior and/or exterior. The apparatus includes an x- and y-axis driver mechanism controlled, for example, by a minicomputer for selectively rotating microspheres retained between a pair of manipulator arms having flat, smooth end surfaces. The driver mechanism includes an apertured plate and ball arrangement which provided for coupled equal and opposite movement of the manipulator arms in two perpendicular directions.

  19. Flow augmenters for vertical-axis windmills and turbines

    SciTech Connect

    Evans, F.C.

    1981-03-10

    A windmill is disclosed, the windmill including a vertical shaft mounted for rotation about its longitudinal axis, a number of blades spaced circumferentially around the longitudinal axis, and being disposed generally parallel to the axis of rotation of the vertical shaft, and supporting arms extending radially outwardly from the vertical shaft for supporting the blades. The windmill also includes a first member connected to an upper end of one of the blades and defining a first surface having a leading edge with respect to the direction of movement of the blade and a trailing edge rearward of the leading edge, the leading edge being lower than the trailing edge. The first surface also includes an inside lateral edge and an outer lateral edge spaced radially outwardly from the inside lateral edge, the inside lateral edge being higher than the outer lateral edge. A second member is connected to the lower end of the blade and defines a second surface, the second surface having a leading edge with respect to the direction of movement of the blade and a trailing surface rearward of the second surface leading edge, the second surface leading edge being higher than the trailing edge. The second surface also includes an inside lateral edge and an outer lateral edge spaced radially outwardly from the second surface inside lateral edge, the second surface inside lateral edge being lower than the second surface outside lateral edge.

  20. World nuclear outlook 1994

    SciTech Connect

    1994-12-01

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2010 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for three different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  1. World nuclear outlook 1995

    SciTech Connect

    1995-09-29

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2015 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for two different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  2. Sandia Vertical-Axis Wind-Turbine Research Presented at Science...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Vertical-Axis Wind-Turbine Research Presented at Science of Making Torque from Wind ... Twitter Google + Vimeo GovDelivery SlideShare Sandia Vertical-Axis Wind-Turbine Research ...

  3. Sandia and Partners Complete Phase I of a Vertical-Axis Deep...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    I of a Vertical-Axis Deep-Water Offshore Turbine Study - Sandia Energy Energy Search Icon ... Sandia and Partners Complete Phase I of a Vertical-Axis Deep-Water Offshore Turbine Study ...

  4. Dual-Axis Resonance Testing of Wind Turbine Blades - Energy Innovation...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Return to Search Dual-Axis Resonance Testing of Wind Turbine Blades National Renewable ... of time needed to fatigue test wind turbine blades.
    Dual-axis testing can ...

  5. Axis-1 diode simulations I: standard 2-inch cathode

    SciTech Connect

    Ekdahl, Carl [Los Alamos National Laboratory

    2011-01-11

    The standard configuration of the DARHT Axis-I diode features a 5.08-cm diameter velvet emitter mounted in the flat surface of the cathode shroud. The surface of the velvet is slightly recessed {approx}2.5 mm. This configuration produces a 1.75 kA beam when a 3.8-MV pulse is applied to the anode-cathode (AK) gap. This note addresses some of the physics of this diode through the use of finite-element simulations.

  6. Torque ripple in a Darrieus, vertical axis wind turbine

    SciTech Connect

    Reuter, R.C. Jr.

    1980-01-01

    Interaction between a steady wind and a rotating, Darrieus, vertical axis wind turbine produces time periodic aerodynamic loads which cause time dependent torque variations, referred to as torque ripple, to occur in the mechanical link between the turbine and the electrical generator. There is concern for the effect of torque ripple upon fatigue life of drive train components and upon power quality. An analytical solution characterizing the phenomenon of torque ripple has been obtained which is based upon a Fourier expansion of the time dependent features of the problem. Numerical results for torque ripple, some experimental data, determination of acceptable levels and methods of controlling it, are presented and discussed.

  7. Fixed wake theory for vertical axis wind turbines

    SciTech Connect

    Wilson, R.E.; Walker, S.N.

    1983-11-01

    A theory for vertical axis wind turbines has been developed using a fixed wake approach. The theory combines some of the best features of vortex and streamtube approaches. This approach accounts for flow differences between fore-and-aft blade positions that are predicted by vortex methods while retaining the low computation costs associated with streamtube theories. The theory is applied to high tip speed ratio operation of a Darrieus Rotor where the use of linear aerodynamics results in explicit calculation of the induced velocities. Comparison to test results shows good agreement.

  8. Fixed wake theory for vertical axis wind turbines

    SciTech Connect

    Wilson, R.E.; Walker, S.N.

    1983-12-01

    A theory for vertical axis wind turbines has been developed using a fixed wake approach. The theory combines some of the best features of vortex and streamtube approaches. This approach accounts for flow differences between fore-and-aftblade positions that are predicted by vortex methods while retaining the low computation costs associated with streamtube theories. The theory is applied to high tip speed ratio operation of a Darrieus Rotor where the use of linear aerodynamics results in explicit calculation of the induced velocities. Comparison to test results shows good agreement.

  9. A 34-meter VAWT (Vertical Axis Wind Turbine) point design

    SciTech Connect

    Ashwill, T.D.; Berg, D.E.; Dodd, H.M.; Rumsey, M.A.; Sutherland, H.J.; Veers, P.S.

    1991-01-01

    The Wind Energy Division at Sandia National Laboratories recently completed a point design based on the 34-m Vertical Axis Wind Turbine (VAWT) Test Bed. The 34-m Test Bed research machine incorporates several innovations that improve Darrieus technology, including increased energy production, over previous machines. The point design differs minimally from the Test Bed; but by removing research-related items, its estimated cost is substantially reduced. The point design is a first step towards a Test-Bed-based commercial machine that would be competitive with conventional sources of power in the mid-1990s. 11 refs., 12 figs., 4 tabs.

  10. Torque ripple in a Darrieus, vertical axis wind turbine

    SciTech Connect

    Reuter, R.C. Jr.

    1980-09-01

    Interaction between a steady wind and a rotating, Darrieus, vertical axis wind turbine produces time periodic aerodynamic loads which cause time dependent torque variations, referred to as torque ripple, to occur in the mechanical link between the turbine and the electrical generator. There is concern for the effect of torque ripple upon fatigue life of drive train components and upon power quality. An analytical solution characterizing the phenomenon of torque ripple has been obtained which is based upon a Fourier expansion of the time dependent features of the problem. Numerical results for torque ripple, some experimental data, determination of acceptable levels and methods of controlling it, are presented and discussed.

  11. Other World Computing | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Computing Jump to: navigation, search Name Other World Computing Facility Other World Computing Sector Wind energy Facility Type Community Wind Facility Status In Service...

  12. World's Most Efficient Solar Cell

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World's Most Efficient Solar Cell National Renewable Energy Laboratory, Spectrolab Set Record For more information contact: George Douglas, 303-275-4096 e:mail: George Douglas ...

  13. Eight Pulse Performance of DARHT Axis II - Preliminary Results

    SciTech Connect

    Schulze, Martin E.

    2015-12-08

    The DARHT-II accelerator produces a 1.65-kA, 17-MeV beam in a 1600-ns pulse. Standard operation of the DARHT Axis II accelerator involves extracting four short pulses from the 1.6 us long macro-pulse produced by the LIA. The four short pulses are extracted using a fast kicker in combination with a quadrupole septum magnet and then transported for several meters to a high-Z material target for conversion to x-rays for radiography. The ability of the DARHT Axis 2 kicker to produce more than the standard four pulse format has been previously demonstrated. This capability was developed to study potential risks associated with beam transport during an initial commissioning phase at low energy (8 MeV) and low current (1.0 kA).The ability of the kicker to deliver more than four pulses to the target has been realized for many years. This note describes the initial results demonstrating this capability.

  14. Lifting surface performance analysis for horizontal axis wind turbines

    SciTech Connect

    Kocurek, D.

    1987-06-01

    This report describes how numerical lifting-surface theory is applied to the calculation of a horizontal-axis wind turbine's aerodynamic characteristics and performance. The report also describes how such an application is implemented as a computer program. The method evolved from rotary-wing and helicopter applications and features a detailed, prescribed wake. The wake model extends from a hovering-rotor experimental generalization to include the effect of the windmill brake state on the radial and axial displacement rates of the trailing vortex system. Performance calculations are made by coupling the lifting-surface circulation solution to a blade-element analysis that incorporates two-dimensional airfoil characteristics as functions of angle of attack and Reynolds number. Several analytical stall models are also provided to extend the airfoil characteristics beyond the limits of available data. Although this work focuses on the steady-performance problem, the method includes ways to investigate the effects of wind-shear profile, tower shadow, and off-axis shaft alignment. Correlating the method to measured wind-turbine performance, and comparing it to blade-element momentum theory calculations, validate and highlight the extreme sensitivity of predictions to the quality of early post-stall airfoil behavior.

  15. RF generation in the DARHT Axis-II beam dump

    SciTech Connect

    Ekdahl, Carl A. Jr.

    2012-05-03

    We have occasionally observed radio-frequency (RF) electromagnetic signals in the downstream transport (DST) of the second axis linear induction accelerator (LIA) at the dual-axis radiographic hydrodynamic testing (DARHT) facility. We have identified and eliminated some of the sources by eliminating the offending cavities. However, we still observe strong RF in the range 1 GHz t0 2 GHz occurring late in the {approx}2-{micro}s pulse that can be excited or prevented by varying the downstream tune. The narrow frequency width (<0.5%) and near exponential growth at the dominant frequency is indicative of a beam-cavity interaction, and electro-magnetic simulations of cavity structure show a spectrum rich in resonances in the observed frequency range. However, the source of beam produced RF in the cavity resonance frequency range has not been identified, and it has been the subject of much speculation, ranging from beam-plasma or beam-ion instabilities to unstable cavity coupling.

  16. Feasibility and optical performance of one axis three positions sun-tracking polar-axis aligned CPCs for photovoltaic applications

    SciTech Connect

    Tang, Runsheng; Yu, Yamei

    2010-09-15

    A new design concept, called one axis three positions sun-tracking polar-axis aligned CPCs (3P-CPCs, in short), was proposed and theoretically studied in this work for photovoltaic applications. The proposed trough-like CPC is oriented in the polar-axis direction, and the aperture is daily adjusted eastward, southward, and westward in the morning, noon and afternoon, respectively, by rotating the CPC trough, to ensure efficient collection of beam radiation nearly all day. To investigate the optical performance of such CPCs, an analytical mathematical procedure is developed to estimate daily and annual solar gain captured by such CPCs based on extraterrestrial radiation and monthly horizontal radiation. Results show that the acceptance half-angle of 3P-CPCs is a unique parameter to determine their optical performance according to extraterrestrial radiation, and the annual solar gain stays constant if the acceptance half-angle, {theta}{sub a}, is less than one third of {omega}{sub 0,min}, the sunset hour angle in the winter solstice, otherwise decreases with the increase of {theta}{sub a}. For 3P-CPCs used in China, the annual solar gain, depending on the climatic conditions in site, decreased with the acceptance half-angle, but such decrease was slow for the case of {theta}{sub a}{<=}{omega}{sub 0,min}/3, indicating that the acceptance half-angle should be less than one third of {omega}{sub 0,min} for maximizing annual energy collection. Compared to fixed east-west aligned CPCs (EW-CPCs) with a yearly optimal acceptance half-angle, the fixed south-facing polar-axis aligned CPCs (1P-CPCs) with the same acceptance half-angle as the EW-CPCs annually collected about 65-74% of that EW-CPCs did, whereas 3P-CPCs annually collected 1.26-1.45 times of that EW-CPCs collected, indicating that 3P-CPCs were more efficient for concentrating solar radiation onto their coupling solar cells. (author)

  17. Dual axis translation apparatus and system for translating an optical beam and related method

    DOEpatents

    Cassidy, Kelly

    1991-01-01

    A dual axis translation device and system in accordance with this invention, for translating an optical beam along both an x-axis and a y-axis which are perpendicular to one another, has a beam directing means acting on said optical beam for directing the beam along a particular path transverse to said x and y axes. An arrangement supporting said beam directing means for movement in the x and y direction within a given plane is provided. The arrangement includes a first means for translating said beam directing means along the x-axis in said given plane in order to translate the beam along said x-axis. The arrangement comprises a second means for translating said beam directing means along the y-axis in said given plane in order to translate the beam along said y-axis.

  18. Solar World USA not SolarWorld AG | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World USA not SolarWorld AG Jump to: navigation, search Name: Solar World USA (not SolarWorld AG) Place: Colorado Springs, Colorado Zip: 80907 Sector: Solar Product: Solar World...

  19. Nonlinear characterization of a single-axis acoustic levitator

    SciTech Connect

    Andrade, Marco A. B.; Ramos, Tiago S.; Okina, Fbio T. A.; Adamowski, Julio C.

    2014-04-15

    The nonlinear behavior of a 20.3 kHz single-axis acoustic levitator formed by a Langevin transducer with a concave radiating surface and a concave reflector is experimentally investigated. In this study, a laser Doppler vibrometer is applied to measure the nonlinear sound field in the air gap between the transducer and the reflector. Additionally, an electronic balance is used in the measurement of the acoustic radiation force on the reflector as a function of the distance between the transducer and the reflector. The experimental results show some effects that cannot be described by the linear acoustic theory, such as the jump phenomenon, harmonic generation, and the hysteresis effect. The influence of these nonlinear effects on the acoustic levitation of small particles is discussed.

  20. Dual-axis resonance testing of wind turbine blades

    DOEpatents

    Hughes, Scott; Musial, Walter; White, Darris

    2014-01-07

    An apparatus (100) for fatigue testing test articles (104) including wind turbine blades. The apparatus (100) includes a test stand (110) that rigidly supports an end (106) of the test article (104). An actuator assembly (120) is attached to the test article (104) and is adapted for substantially concurrently imparting first and second forcing functions in first and second directions on the test article (104), with the first and second directions being perpendicular to a longitudinal axis. A controller (130) transmits first and second sets of displacement signals (160, 164) to the actuator assembly (120) at two resonant frequencies of the test system (104). The displacement signals (160, 164) initiate the actuator assembly (120) to impart the forcing loads to concurrently oscillate the test article (104) in the first and second directions. With turbine blades, the blades (104) are resonant tested concurrently for fatigue in the flapwise and edgewise directions.

  1. New airfoils for small horizontal axis wind turbines

    SciTech Connect

    Giguere, P.; Selig, M.S.

    1997-12-31

    In a continuing effort to enhance the performance of small energy systems, one root airfoil and three primary airfoils were specifically designed for small horizontal axis wind turbines. These airfoils are intended primarily for 1-10 kW variable-speed wind turbines for both conventional (tapered/twisted) or pultruded blades. The four airfoils were wind-tunnel tested at Reynolds numbers between 100,000 and 500,000. Tests with simulated leading-edge roughness were also conducted. The results indicate that small variable-speed wind turbines should benefit from the use of the new airfoils which provide enhanced lift-to-drag ratio performance as compared with previously existing airfoils.

  2. How DARHT Works - the World's Most Powerful X-ray Machine

    ScienceCinema

    None

    2016-07-12

    The Dual Axis Radiographic Hydrodynamic Test (DARHT) facility at Los Alamos National Laboratory is an essential scientific tool that supports Stockpile Stewardship at the Laboratory. The World's most powerful x-ray machine, it's used to take high-speed images of mock nuclear devices - data that is used to confirm and modify advanced computer codes in assuring the safety, security, and effectiveness of the U.S. nuclear deterrent.

  3. IR Spectrometer Using 90-degree Off-axis Parabolic Mirrors

    SciTech Connect

    Robert M. Malone, Richard, G. Hacking, Ian J. McKenna, and Daniel H. Dolan

    2008-09-02

    A gated spectrometer has been designed for real-time, pulsed infrared (IR) studies at the National Synchrotron Light ource at the Brookhaven National Laboratory. A pair of 90-degree, off-axis parabolic mirrors are used to relay the light from an entrance slit to an output IR recording camera. With an initial wavelength range of 1500–4500 nm required, gratings could not be used in the spectrometer because grating orders would overlap. A magnesium oxide prism, placed between these parabolic mirrors, serves as the dispersion element. The spectrometer is doubly telecentric. With proper choice of the air spacing between the prism and the second parabolic mirror, any spectral region of interest within the InSb camera array’s sensitivity region can be recorded. The wavelengths leaving the second parabolic mirror are collimated, thereby relaxing the camera positioning tolerance. To set up the instrument, two different wavelength (visible) lasers are introduced at the entrance slit and made collinear with the optical axis via flip mirrors. After dispersion by the prism, these two laser beams are directed to tick marks located on the outside housing of the gated IR camera. This provides first-order wavelength calibration for the instrument. Light that is reflected off the front prism face is coupled into a high-speed detector to verify steady radiance during the gated spectral imaging. Alignment features include tick marks on the prism and parabolic mirrors. This instrument was designed to complement singlepoint pyrometry, which provides continuous time histories of a small collection of spots from shock-heated targets.

  4. The world's first nuclear detonation

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (and other Manhattan Project sites). It took them less than two years to change the world. July 10, 2015 x x "Highly accurate 3D computing is a Holy Grail of the Stockpile...

  5. Phonon mean free path of graphite along the c-axis

    SciTech Connect

    Wei, Zhiyong; Yang, Juekuan; Chen, Weiyu; Bi, Kedong; Chen, Yunfei, E-mail: yunfeichen@seu.edu.cn [Jiangsu Key Laboratory for Design and Manufacture of Micro/Nano Biomedical Instruments and School of Mechanical Engineering, Southeast University, Nanjing 210096 (China); Li, Deyu, E-mail: deyu.li@vanderbilt.edu [Department of Mechanical Engineering, Vanderbilt University, Nashville, Tennessee 37235-1592 (United States)

    2014-02-24

    Phonon transport in the c-axis direction of graphite thin films has been studied using non-equilibrium molecular dynamics (MD) simulation. The simulation results show that the c-axis thermal conductivities for films of thickness ranging from 20 to 500 atomic layers are significantly lower than the bulk value. Based on the MD data, a method is developed to construct the c-axis thermal conductivity as an accumulation function of phonon mean free path (MFP), from which we show that phonons with MFPs from 2 to 2000?nm contribute ?80% of the graphite c-axis thermal conductivity at room temperature, and phonons with MFPs larger than 100?nm contribute over 40% to the c-axis thermal conductivity. These findings indicate that the commonly believed value of just a few nanometers from the simple kinetic theory drastically underestimates the c-axis phonon MFP of graphite.

  6. Aberrant Left Inferior Bronchial Artery Originating from the Left Gastric Artery in a Patient with Acute Massive Hemoptysis

    SciTech Connect

    Jiang, Sen Sun, Xi-Wen Yu, Dong Jie, Bing

    2013-10-15

    Massive hemoptysis is a life-threatening condition, and the major source of bleeding in this condition is the bronchial circulation. Bronchial artery embolization is a safe and effective treatment for controlling hemoptysis. However, the sites of origin of the bronchial arteries (BAs) have numerous anatomical variations, which can result in a technical challenge to identify a bleeding artery. We present a rare case of a left inferior BA that originated from the left gastric artery in a patient with recurrent massive hemoptysis caused by bronchiectasis. The aberrant BA was embolized, and hemoptysis has been controlled for 8 months.

  7. MHK ISDB/Instruments/AXYS HydroLevel Buoy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    AXYS HydroLevel Buoy < MHK ISDB Jump to: navigation, search MHK Instrumentation & Sensor Database Menu Home Search Add Instrument Add Sensor Add Company Community FAQ Help...

  8. Dual-axis high-data-rate atom interferometer via cold ensemble exchange

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: Dual-axis high-data-rate atom interferometer via cold ensemble exchange Citation Details In-Document Search Title: Dual-axis high-data-rate atom interferometer via cold ensemble exchange We demonstrate a dual-axis accelerometer and gyroscope atom interferometer, which can form the building blocks of a six-axis inertial measurement unit. By recapturing the atoms after the interferometer sequence, we maintain a large atom number at high data

  9. Control system for a vertical-axis windmill

    DOEpatents

    Brulle, R.V.

    1981-09-03

    A vertical-axis windmill having a rotating structure is provided with a series of articulated vertical blades whose positions are controlled to maintain a constant RPM for the rotating structure, when wind speed is sufficient. A microprocessor controller is used to process information on wind speed, wind direction and RPM of the rotating structure to develop an electrical signal for establishing blade position. The preferred embodiment of the invention, when connected to a utility grid, is designed to generate 40 kilowatts of power when exposed to a 20 mile per hour wind. The control system for the windmill includes electrical blade actuators that modulate the blades of the rotating structure. Blade modulation controls the blade angle of attack, which in turn controls the RPM of the rotor. In the preferred embodiment, the microprocessor controller provides the operation logic and control functions. A wind speed sensor provides inputs to start or stop the windmill, and a wind direction sensor is used to keep the blade flip region at 90 and 270/sup 0/ to the wind. The control system is designed to maintain constant rotor RPM when wind speed is between 10 and 40 miles per hour.

  10. Static-stress analysis of dual-axis confinement vessel

    SciTech Connect

    Bultman, D.H.

    1992-11-01

    This study evaluates the static-pressure containment capability of a 6-ft-diameter, spherical vessel, made of HSLA-100 steel, to be used for high-explosive (HE) containment. The confinement vessel is designed for use with the Dual-Axis Radiographic Hydrotest Facility (DARHT) being developed at Los Alamos National Laboratory. Two sets of openings in the vessel are covered with x-ray transparent covers to allow radiographic imaging of an explosion as it occurs inside the vessel. The confinement vessel is analyzed as a pressure vessel based on the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, and the Welding Research Council Bulletin, WRC-107. Combined stresses resulting from internal pressure and external loads on nozzles are calculated and compared with the allowable stresses for HSLA-100 steel. Results confirm that the shell and nozzles of the confinement vessel are adequately designed to safely contain the maximum residual pressure of 1675 psi that would result from an HE charge of 24.2 kg detonated in a vacuum. Shell stresses at the shell-to-nozzle interface, produced from external loads on the nozzles, were less than 400 psi. The maximum combined stress resulting from the internal pressure plus external loads was 16,070 psi, which is less than half the allowable stress of 42,375 psi for HSLA-100 steel.

  11. Static-stress analysis of dual-axis safety vessel

    SciTech Connect

    Bultman, D.H.

    1992-11-01

    An 8-ft-diameter safety vessel, made of HSLA-100 steel, is evaluated to determine its ability to contain the quasi-static residual pressure from a high-explosive (HE) blast. The safety vessel is designed for use with the Dual-Axis Radiographic Hydrotest (DARHT) facility being developed at Los Alamos National Laboratory. A smaller confinement vessel fits inside the safety vessel and contains the actual explosion, and the safety vessel functions as a second layer of containment in the unlikely case of a confinement vessel leak. The safety vessel is analyzed as a pressure vessel based on the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, and the Welding Research Council Bulletin, WRC107. Combined stresses that result from internal pressure and external loads on nozzles are calculated and compared to the allowable stresses for HSLA-100 steel. Results confirm that the shell and nozzle components are adequately designed for a static pressure of 830 psi, plus the maximum expected external loads. Shell stresses at the shellto-nozzle interface, produced from external loads on the nozzles, were less than 700 psi. The maximum combined stress resulting from the internal pressure plus external loads was 17,384 psi, which is significantly less than the allowable stress of 42,375 psi for HSLA-100 steel.

  12. PV World Co Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Co Ltd Jump to: navigation, search Name: PV World Co Ltd Place: Singapore Product: Singapore-based PV module manufacturer. References: PV World Co Ltd1 This article is a...

  13. Jaguar: The World?s Most Powerful Computer

    SciTech Connect

    Bland, Arthur S Buddy; Rogers, James H; Kendall, Ricky A; Kothe, Douglas B; Shipman, Galen M

    2009-01-01

    The Cray XT system at ORNL is the world s most powerful computer with several applications exceeding one-petaflops performance. This paper describes the architecture of Jaguar with combined XT4 and XT5 nodes along with an external Lustre file system and external login nodes. We also present some early results from Jaguar.

  14. World`s LPG supply picture will change by 2000

    SciTech Connect

    True, W.R.

    1995-11-06

    Middle East LPG producers will continue to dominate world export markets in 1996. Led by Saudi Arabia, the Middle East will produce nearly 26 million metric tons of LPG in million metric tons of LPG in 1996, more than 54% of the world`s almost 48 million metric tons of export LPG. In 2000, however, with world exports of LPG expanding to 58.9 million metric tons, Middle East suppliers; share will have remained flat, making up 31.7 million metric tons, or 53.9%. Saudi Arabia`s contribution will exceed 15 million metric tons, reflecting essentially no growth since 1995. These and other patterns, from data compiled by Purvin and Gertz, Dallas, and published earlier this year, show other suppliers of LPG, especially African (Algeria/Nigeria), North Sea, and Latin American (Venezuela/Argentina), picking up larger shares in the last 5 years of this decade. This scenario assumes completion of several major supply projects that are either panned, under construction, or nearing start up in most of these areas. The paper discusses the global picture, the supply situation in the Middle East, Africa, the North Sea, and South America.

  15. World class recreation, bold science

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World class recreation, bold science World class recreation, bold science Los Alamos employees enjoy access to a network of 100+ miles of high-quality trails, much of it within walking distance from key Lab facilities or from residents' front doors. April 3, 2012 Bikers (and LANL Postdocs) Brent and Pam in Los Alamos canyon riding hard on the trail Bikers (and LANL Postdocs) Brent and Pam in Los Alamos canyon riding hard on the trail. Hikers, mountain bikers, joggers, and dog walkers can wind

  16. World Wind Energy Association | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Association Jump to: navigation, search Logo: World Wind Energy Association Name: World Wind Energy Association Address: Charles-de-Gaulle-Str. 5 Place: Bonn, Germany Phone Number:...

  17. SolarWorld AG | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    SolarWorld AG Jump to: navigation, search Name: SolarWorld AG Place: Bonn, Germany Zip: 53113 Product: Vertically integrated PV manufacturer, with factories in Freiberg, Germany...

  18. World Health Organization (WHO) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Health Organization (WHO) Jump to: navigation, search Logo: World Health Organization (WHO) Name: World Health Organization (WHO) Address: 20, avenue Appia 1211 Geneva, Switzerland...

  19. Sustainable World Capital | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Capital Jump to: navigation, search Name: Sustainable World Capital Place: Atlanta, Georgia Zip: 30326 Product: Atlanta-based firm that connects companies with institutional...

  20. Renewed World Energies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Renewed World Energies Jump to: navigation, search Name: Renewed World Energies Place: Georgetown, South Carolina Zip: 29440 Product: South Carolina-based closed loop...

  1. Save the World Air | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    the World Air Jump to: navigation, search Name: Save the World Air Place: Santa Barbara, California Zip: 93101 Product: California-based, device manufacturer for better fuel...

  2. Characterization of a multi-axis ion chamber array

    SciTech Connect

    Simon, Thomas A.; Kozelka, Jakub; Simon, William E.; Kahler, Darren; Li, Jonathan; Liu, Chihray

    2010-11-15

    Purpose: The aim of this work was to characterize a multi-axis ion chamber array (IC PROFILER; Sun Nuclear Corporation, Melbourne, FL USA) that has the potential to simplify the acquisition of LINAC beam data. Methods: The IC PROFILER (or panel) measurement response was characterized with respect to radiation beam properties, including dose, dose per pulse, pulse rate frequency (PRF), and energy. Panel properties were also studied, including detector-calibration stability, power-on time, backscatter dependence, and the panel's agreement with water tank measurements [profiles, fractional depth dose (FDD), and output factors]. Results: The panel's relative deviation was typically within ({+-}) 1% of an independent (or nominal) response for all properties that were tested. Notable results were (a) a detectable relative field shape change of {approx}1% with linear accelerator PRF changes; (b) a large range in backscatter thickness had a minimal effect on the measured dose distribution (typically less than 1%); (c) the error spread in profile comparison between the panel and scanning water tank (Blue Phantom, CC13; IBA Schwarzenbruck, DE) was approximately ({+-}) 0.75%. Conclusions: The ability of the panel to accurately reproduce water tank profiles, FDDs, and output factors is an indication of its abilities as a dosimetry system. The benefits of using the panel versus a scanning water tank are less setup time and less error susceptibility. The same measurements (including device setup and breakdown) for both systems took 180 min with the water tank versus 30 min with the panel. The time-savings increase as the measurement load is increased.

  3. 3D World Building System

    SciTech Connect

    2013-10-30

    This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

  4. World Congress on Industrial Biotechnology

    Energy.gov [DOE]

    Held this year in Montreal, Quebec, the BIO World Congress on Industrial Biotechnology will bring together business leaders, investors, and policy makers in biofuels, biobased products, and renewable chemicals. BETO Demonstration and Market Transformation Program Manager Jim Spaeth and Support Specialist Natalie Roberts will be in attendance.

  5. 3D World Building System

    ScienceCinema

    None

    2016-07-12

    This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

  6. Left-right spin asymmetry in ? N? ? h ?

    DOE PAGES [OSTI]

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-01

    We consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We also give predictions formorefuture experiments and highlight in particular the unique opportunities at an Electron Ion Collider.less

  7. Coal pricing in China: Issues and reform strategy. World Bank discussion paper

    SciTech Connect

    Albouy, Y.

    1991-01-01

    The study assesses the magnitude of coal price distortions left in place by the dual track pricing approach to price reform implemented by China in the 1980s; it examines the economic and financial costs of these distortions and identifies the potential winners and losers of pricing improvements. Finally the report outlines a strategy for gradual price adjustments and liberalization in the coal sector. (Copyright (c) 1991 The International Bank for Reconstruction and Development/The World Bank.)

  8. The world`s first commercial iron carbide plant

    SciTech Connect

    Prichard, L.C.; Schad, D.

    1995-12-01

    The paper traces the development of Nucor`s investigation of clean iron unit processes, namely, direct reduction, and the decision to build and operate the world`s first commercial iron carbide plant. They first investigated coal based processes since the US has abundant coal reserves, but found a variety of reasons for dropping the coal-based processes from further consideration. A natural gas based process was selected, but the failure to find economically priced gas supplies stopped the development of a US based venture. It was later found that Trinidad had economically priced and abundant supplies of natural gas, and the system of government, the use of English language, and geographic location were also ideal. The cost estimates required modification of the design, but the plant was begun in April, 1993. Start-up problems with the plant are also discussed. Production should commence shortly.

  9. World`s developing regions provide spark for pipeline construction

    SciTech Connect

    Koen, A.D.; True, W.R.

    1996-02-05

    This paper reviews the proposed construction of oil and gas pipelines which are underway or proposed to be started in 1996. It breaks down the projects by region of the world, type of product to be carried, and diameter of pipeline. It also provides mileage for each category of pipeline. Major projects in each region are more thoroughly discussed giving details on construction expenditures, construction problems, and political issues.

  10. World Congress on Industrial Biotechnology

    Energy.gov [DOE]

    The World Congress on Industrial Biotechnology is the world’s largest conference on biotechnology and will gather leaders across the bioeconomy. The conference will be held April 17–20, 2016 in San Diego, California. Deputy Assistant Secretary of Sustainable Transportation Reuben Sarkar will also be speaking on a panel titled, “Genomics Pushing the Boundaries of Advanced Manufacturing,” and Technology Manager Jay Fitzgerald will be in attendance

  11. The Role of Anti-Phase Domains in InSb-Based Structures Grown on On-Axis and Off-Axis Ge Substrates

    SciTech Connect

    Debnath, M. C.; Mishima, T. D.; Santos, M. B.; Hossain, K.; Holland, O. W.

    2011-12-26

    Anti-phase domains form in InSb epilayers and InSb/Al{sub 0.20}In{sub 0.80}Sb single quantum wells when grown upon on-axis (001) Ge substrates by molecular beam epitaxy. Domain formation is partially suppressed through growth on Ge substrates with surfaces that are several degrees off the (001) or (211) axis. By using off-axis Ge substrates, room-temperature electron mobilities increased to {approx}60,000 cm{sup 2}/V-s and {approx}14,000 cm{sup 2}/V-s for a 4.0-{mu}m-thick InSb epilayer and a 25-nm InSb quantum well, respectively.

  12. Local-circulation model for Darrieus vertical-axis wind turbines

    SciTech Connect

    Masse, B.

    1986-04-01

    A new computational model for the aerodynamics of the vertical-axis wind turbine is presented. Based on the local-circulation method generalized for curved blades, combined with a wake model for the vertical-axis wind turbine, it differs markedly from current models based on variations in the streamtube momentum and vortex models using the lifting-line theory. A computer code has been developed to calculate the loads and performance of the Darrieus vertical-axis wind turbine. The results show good agreement with experimental data and compare well with other methods. 12 references.

  13. CIA-The World Factbook | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Dataset Website: www.cia.govlibrarypublicationsthe-world-factbookindex.html Cost: Free CIA-The World Factbook Screenshot References: CIA-The World Factbook1 "The World...

  14. Gedanken Worlds without Higgs: QCD-Induced Electroweak Symmetry Breaking

    SciTech Connect

    Quigg, Chris; Shrock, Robert; /YITP, Stony Brook

    2009-01-01

    To illuminate how electroweak symmetry breaking shapes the physical world, we investigate toy models in which no Higgs fields or other constructs are introduced to induce spontaneous symmetry breaking. Two models incorporate the standard SU(3){sub c} {circle_times} SU(2){sub L} {circle_times} U(1){sub Y} gauge symmetry and fermion content similar to that of the standard model. The first class--like the standard electroweak theory--contains no bare mass terms, so the spontaneous breaking of chiral symmetry within quantum chromodynamics is the only source of electroweak symmetry breaking. The second class adds bare fermion masses sufficiently small that QCD remains the dominant source of electroweak symmetry breaking and the model can serve as a well-behaved low-energy effective field theory to energies somewhat above the hadronic scale. A third class of models is based on the left-right-symmetric SU(3){sub c} {circle_times} SU(2){sub L} {circle_times} SU(2){sub R} {circle_times} U(1)B?L gauge group. In a fourth class of models, built on SU(4){sub PS} {circle_times} SU(2){sub L} {circle_times} SU(2){sub R} gauge symmetry, lepton number is treated as a fourth color. Many interesting characteristics of the models stem from the fact that the effective strength of the weak interactions is much closer to that of the residual strong interactions than in the real world. The Higgs-free models not only provide informative contrasts to the real world, but also lead us to consider intriguing issues in the application of field theory to the real world.

  15. Coffin v. Left Hand Ditch Co., 6 Colo. 443 (1882) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    v. Left Hand Ditch Co., 6 Colo. 443 (1882) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal CaseHearing: Coffin v. Left Hand Ditch Co., 6 Colo. 443...

  16. Gras Dowr joins world`s FPSO fleet

    SciTech Connect

    1997-05-05

    The Gras Dowr, a floating production, storage, and offloading vessel (FPSD) for Amerada Hess Ltd.`s North Sea Durward and Dauntless fields, is one of the latest additions to the world`s growing FPSO fleet. The Gras Dowr, anchored in about 90 m of water, lies between the Durward (U.K. Block 21/16) and Dauntless (U.K. Block 21/11) fields, about 3.5 km from the subsea wellhead locations. The Gras Dowr`s main functions, according to Bluewater Offshore Production Systems Ltd., are to: receive fluids from well risers; process incoming fluids to separate the fluid into crude, water, and gas; store dry crude oil and maintain the required temperature; treat effluent to allow for water discharge to the sea; compress gas for gas lift as a future option; provide chemical injection skid for process chemical injection; use a part of the produced gas for fuel gas, and flare excess gas; inject treated seawater into the injection wells; house power generation for process and offloading operation and utilities; offload to a tandem moored shuttle tanker including receiving liquid fuel from the same tanker; provide accommodations for operating and maintenance crews; allow helicopters landings and takeoffs; allow handling and storage of goods transported by supply vessels; moor a shuttle tanker; and control the subsea wells.

  17. Brain Abscess Associated with Isolated Left Superior Vena Cava Draining into the Left Atrium in the Absence of Coronary Sinus and Atrial Septal Defect

    SciTech Connect

    Erol, Ilknur Cetin, I. Ilker; Alehan, Fuesun; Varan, Birguel; Ozkan, Sueleyman; Agildere, A. Muhtesem; Tokel, Kursad

    2006-06-15

    A previously healthy 12-year-old girl presented with severe headache for 2 weeks. On physical examination, there was finger clubbing without apparent cyanosis. Neurological examination revealed only papiledema without focal neurologic signs. Cerebral magnetic resonance imaging showed the characteristic features of brain abscess in the left frontal lobe. Cardiologic workup to exclude a right-to-left shunt showed an abnormality of the systemic venous drainage: presence of isolated left superior vena cava draining into the left atrium in the absence of coronary sinus and atrial septal defect. This anomaly is rare, because only a few other cases have been reported.

  18. Double-exchange selection rule for the c-axis conductivity in...

    Office of Scientific and Technical Information (OSTI)

    Double-exchange selection rule for the c-axis conductivity in layered Lasub 2-2xSrsub 1+2xMnsub 2Osub 7 single crystals below Tsub c Citation Details In-Document Search ...

  19. High Current-Carrying Capability in c -Axis-Oriented Superconducting...

    Office of Scientific and Technical Information (OSTI)

    High Current-Carrying Capability in c -Axis-Oriented Superconducting MgBsub 2 Thin Films Citation Details In-Document Search Title: High Current-Carrying Capability in c ...

  20. Characterization of reactively sputtered c-axis aligned nanocrystalline InGaZnO{sub 4}

    SciTech Connect

    Lynch, David M.; Zhu, Bin; Ast, Dieter G.; Thompson, Michael O.; Levin, Barnaby D. A.; Muller, David A.; Greene, Raymond G.

    2014-12-29

    Crystallinity and texturing of RF sputtered c-axis aligned crystal InGaZnO{sub 4} (CAAC IGZO) thin films were quantified using X-ray diffraction techniques. Above 190?C, nanocrystalline films with an X-ray peak at 2??=?30 (009 planes) developed with increasing c-axis normal texturing up to 310?C. Under optimal conditions (310?C, 10% O{sub 2}), films exhibited a c-axis texture full-width half-maximum of 20. Cross-sectional high-resolution transmission electron microscopy confirmed these results, showing alignment variation of 9 over a 15 15?nm field of view and indicating formation of much larger aligned domains than previously reported. At higher deposition temperatures, c-axis alignment was gradually lost as polycrystalline films developed.

  1. Content-based fused off-axis object illumination direct-to-digital holography

    DOEpatents

    Price, Jeffery R.

    2006-05-02

    Systems and methods are described for content-based fused off-axis illumination direct-to-digital holography. A method includes calculating an illumination angle with respect to an optical axis defined by a focusing lens as a function of data representing a Fourier analyzed spatially heterodyne hologram; reflecting a reference beam from a reference mirror at a non-normal angle; reflecting an object beam from an object the object beam incident upon the object at the illumination angle; focusing the reference beam and the object beam at a focal plane of a digital recorder to from the content-based off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; and digitally recording the content based off-axis illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis.

  2. Axi-dilaton gravity in D{>=}4 dimensional space-times with torsion

    SciTech Connect

    Cebeci, H.; Dereli, T.

    2005-01-15

    We study models of axi-dilaton gravity in space-time geometries with torsion. We discuss conformal rescaling rules in both Riemannian and non-Riemannian formulations. We give static, spherically symmetric solutions and examine their singularity behavior.

  3. Off-axis variable focus and aberration control mirrors and method

    DOEpatents

    Himmer, Phillip A.; Dickensheets, David L.

    2009-02-24

    An optical element with multi-layer composites that deforms to reduce optical aberrations in off-axis optic. Methods are also described in relation to the optical element.

  4. World frontiers beckon oil finders

    SciTech Connect

    Not Available

    1991-09-01

    This paper discusses the international aspects of the petroleum industry. Most who work in the industry agree that the possibilities for huge are found largely in international regions. Something that is helping fuel that possibility is the way countries are increasingly opening their doors to US oil industry involvement. Listed in this paper is a partial list of the reported projects now underway around the world involving US companies. It is not intended to be comprehensive, but rather an indication of how work continues despite a general lull atmosphere for the oil industry. These include Albania, Bulgaria, Congo, Czechoslovakia, Dominican Republic, Ethiopia, Ireland, Malta, Madagascar, Mongolia, Mozambique, Nigeria, Panama, Paraquay, and Senegal.

  5. THE WORLD'S Biggest Fan Collection

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    WORLD'S Biggest Fan Collection If you only know the Big Ass Fan Company as the preeminent designer and manufacturer of high volume, low speed fans for factories and cows, it's time you get to know us better. While we continue to lead the way in industrial and agricultural air movement, we've also refined these designs to bring the same innovation and benefits of our famous fans to circulate an ocean of air in sound-sensitive commercial spaces and homes. And when our customers said they wanted

  6. Mixed dark matter in left-right symmetric models

    DOE PAGES [OSTI]

    Berlin, Asher; Fox, Patrick J.; Hooper, Dan; Mohlabeng, Gopolang

    2016-06-08

    Motivated by the recently reported diboson and dijet excesses in Run 1 data at ATLAS and CMS, we explore models of mixed dark matter in left-right symmetric theories. In this study, we calculate the relic abundance and the elastic scattering cross section with nuclei for a number of dark matter candidates that appear within the fermionic multiplets of left-right symmetric models. In contrast to the case of pure multiplets, WIMP-nucleon scattering proceeds at tree-level, and hence the projected reach of future direct detection experiments such as LUX-ZEPLIN and XENON1T will cover large regions of parameter space for TeV-scale thermal darkmore » matter. Decays of the heavy charged W(') boson to particles in the dark sector can potentially shift the right-handed gauge coupling to larger values when fixed to the rate of the Run 1 excesses, moving towards the theoretically attractive scenario, gR = gL. Furthermore, this region of parameter space may be probed by future collider searches for new Higgs bosons or electroweak fermions.« less

  7. Design and analysis of a vertical axis ocean current power plant

    SciTech Connect

    Richard, C.C.; Hartzog, J.R.; Sorge, R.V.; Quigley, J.V.; Adams, G.R.

    1981-01-01

    This paper discusses a calculation of the power generated by a vertical axis ocean current power plant. An analytical model is presented and a computer solution described. Results of the calculation show the optimum angles of the blades about the vertical axis to maximize power output, as well as the total extractable power of the plant for various ocean current velocities. Tow tank tests are described for a scale model of the plant.

  8. Method for non-contact particle manipulation and control of particle spacing along an axis

    DOEpatents

    Goddard, Gregory Russ; Kaduchak, Gregory; Jett, James Hubert; Graves, Steven Wayde

    2012-09-11

    Method and system for uniformly spacing particles in a flowing system comprising suspending particles in an elongated fluid filled cavity; exposing said cavity to an axial acoustic standing wave field, wherein said axial acoustic standing wave field drives said particles to nodal and anti-nodal positions along the center axis of said cavity to result in uniformly spaced particles; and focusing said particles to the center axis of said cavity.

  9. Method for non-contact particle manipulation and control of particle spacing along an axis

    DOEpatents

    Goddard, Gregory R; Kaduchak, Gregory; Jett, James H; Graves, Steven W

    2015-01-13

    Method and system for uniformly spacing particles in a flowing system comprising suspending particles in an elongated fluid filled cavity; exposing said cavity to an axial acoustic standing wave field, wherein said axial acoustic standing wave field drives said particles to nodal and anti-nodal positions along the center axis of said cavity to result in uniformly spaced particles; and focusing said particles to the center axis of said cavity.

  10. Strain Doping: Reversible Single-Axis Control of a Complex Oxide Lattice

    Office of Scientific and Technical Information (OSTI)

    via Helium Implantation (Journal Article) | SciTech Connect Strain Doping: Reversible Single-Axis Control of a Complex Oxide Lattice via Helium Implantation Citation Details In-Document Search Title: Strain Doping: Reversible Single-Axis Control of a Complex Oxide Lattice via Helium Implantation Authors: Guo, Hangwen ; Dong, Shuai ; Rack, Philip D. ; Budai, John D. ; Beekman, Christianne ; Gai, Zheng ; Siemons, Wolter ; Gonzalez, C. M. ; Timilsina, R. ; Wong, Anthony T. ; Herklotz, Andreas ;

  11. The Use of a Beryllium Hopkinson Bar to Characterize In-Axis and Cross-Axis Accelerometer Response in Shock Environments

    SciTech Connect

    Bateman, V.I.; Brown, F.A.

    1999-01-01

    The characteristics of a piezoresistive accelerometer in shock environments have been studied at Sandia National Laboratories in the Mechanical Shock Laboratory. A beryllium Hopkinson bar capability with diameters of 0.75 in. and 2.0 in has been developed to extend our understanding of the piezoresistive accelerometer, in two mechanical configurations, in the high frequency, high shock environments where measurements are being made. The in-axis performance of the piezoresistive accelerometer determined from measurements with a beryllium Hopkinson bar and a certified laser doppler vibrometer as the reference measurement is presented. The cross-axis performance of the accelerometer subjected to static compression on a beryllium cylinder, static strain on a steel beam, dynamic strain on a steel beam (ISA-RP 37.2, Paragraph 6.6), and compressive shocks in a split beryllium Hopkinson bar configuration is also presented. The performance of the accelerometer in a combined in-axis and cross-axis shock environment is shown for one configuration. Finally, a failure analysis conducted in cooperation with ENDEVCO gives a cause for the occasional unexplained failures that have occurred in some applications.

  12. SolarWorld Korea | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Korea-based JV set up by SolarWorld AG and SolarPark Engineering Co Ltd aimed at manufacturing solar modules and installing utility-scale PV projects. References: SolarWorld...

  13. ClearWorld Now | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Now Place: Beijing, China Zip: 100027 Product: China-based operational investment arm of ClearWorld Energy Ltd. References: ClearWorld Now1 This article is a stub. You can...

  14. Fused off-axis object illumination direct-to-digital holography with a plurality of illumination sources

    DOEpatents

    Price, Jeffery R.; Bingham, Philip R.

    2005-11-08

    Systems and methods are described for rapid acquisition of fused off-axis illumination direct-to-digital holography. A method of recording a plurality of off-axis object illuminated spatially heterodyne holograms, each of the off-axis object illuminated spatially heterodyne holograms including spatially heterodyne fringes for Fourier analysis, includes digitally recording, with a first illumination source of an interferometer, a first off-axis object illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis; and digitally recording, with a second illumination source of the interferometer, a second off-axis object illuminated spatially heterodyne hologram including spatially heterodyne fringes for Fourier analysis.

  15. Neal Lane: Science in a Flat World

    ScienceCinema

    Neal Lane

    2016-07-12

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  16. Neal Lane: Science in a Flat World

    SciTech Connect

    Neal Lane

    2006-09-12

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  17. Transjugular Intrahepatic Porto-Systemic Shunt Placement in a Patient with Left-Lateral Split-Liver Transplant and Mesenterico-Left Portal Vein by Pass Placement

    SciTech Connect

    Miraglia, Roberto Maruzzelli, Luigi; Luca, Angelo

    2011-12-15

    This is a report of a successful placement of a transjugular intrahepatic porto-systemic shunt in a young patient with previous left-lateral, split-liver transplant and mesenterico-left portal vein by pass placement after posttransplant extrahepatic portal vein thrombosis.

  18. The use of a beryllium Hopkinson bar to characterize in-axis and cross-axis accelerometer response in shock environments

    SciTech Connect

    Bateman, V.I.; Brown, F.A.

    1997-05-01

    The characteristics of a piezoresistive accelerometer in shock environments are being studied at Sandia National Laboratories in the Mechanical Shock Testing Laboratory. A beryllium Hopkinson bar capability has been developed to extend the understanding of the piezoresistive accelerometer, in two mechanical configurations and with and without mechanical isolation, in the high frequency, high shock environments where measurements are being made. In this paper, recent measurements with beryllium single and split-Hopkinson bar configurations are described. The in axis performance of the piezoresistive accelerometer in mechanical isolation for frequencies of dc-30 kHz and shock magnitudes of up to 6,000 g as determined from measurements with a beryllium Hopkinson bar with a certified laser doppler vibrometer as the reference measurement are presented. Results of characterizations of the accelerometers subjected to cross axis shocks in a split beryllium Hopkinson bar configuration are also presented.

  19. AXIS: An instrument for imaging Compton radiographs using the Advanced Radiography Capability on the NIF

    SciTech Connect

    Hall, G. N. Izumi, N.; Tommasini, R.; Carpenter, A. C.; Palmer, N. E.; Zacharias, R.; Felker, B.; Holder, J. P.; Allen, F. V.; Bell, P. M.; Bradley, D.; Montesanti, R.; Landen, O. L.

    2014-11-15

    Compton radiography is an important diagnostic for Inertial Confinement Fusion (ICF), as it provides a means to measure the density and asymmetries of the DT fuel in an ICF capsule near the time of peak compression. The AXIS instrument (ARC (Advanced Radiography Capability) X-ray Imaging System) is a gated detector in development for the National Ignition Facility (NIF), and will initially be capable of recording two Compton radiographs during a single NIF shot. The principal reason for the development of AXIS is the requirement for significantly improved detection quantum efficiency (DQE) at high x-ray energies. AXIS will be the detector for Compton radiography driven by the ARC laser, which will be used to produce Bremsstrahlung X-ray backlighter sources over the range of 50 keV–200 keV for this purpose. It is expected that AXIS will be capable of recording these high-energy x-rays with a DQE several times greater than other X-ray cameras at NIF, as well as providing a much larger field of view of the imploded capsule. AXIS will therefore provide an image with larger signal-to-noise that will allow the density and distribution of the compressed DT fuel to be measured with significantly greater accuracy as ICF experiments are tuned for ignition.

  20. Neutrino telescopes in the World

    SciTech Connect

    Ernenwein, J.-P.

    2007-01-12

    Neutrino astronomy has rapidly developed these last years, being the only way to get specific and reliable information about astrophysical objects still poorly understood.Currently two neutrino telescopes are operational in the World: BAIKAL, in the lake of the same name in Siberia, and AMANDA, in the ices of the South Pole. Two telescopes of the same type are under construction in the Mediterranean Sea: ANTARES and NESTOR. All these telescopes belong to a first generation, with an instrumented volume smaller or equal to 0.02 km3. Also in the Mediterranean Sea, the NEMO project is just in its stag phase, within the framework of a cubic kilometer size neutrino telescope study. Lastly, the ICECUBE detector, with a volume reaching about 1 km3, is under construction on the site of AMANDA experiment, while an extension of the BAIKAL detector toward km3 is under study. We will present here the characteristics of these experiments, as well as the results of their observations.

  1. In-Axis and Cross-Axid Accelerometer Response in Shock Environments

    SciTech Connect

    Bateman, V.I.; Brown, F.A.

    1999-03-10

    The characteristics of a piezoresistive accelerometer in shock environments have been studied at Sandia National Laboratories (SNL) in the Mechanical Shock Testing Laboratory for ten years The SNL Shock Laboratory has developed a capability to characterize accelerometers and other transducers with shocks aligned with the transducer's sensing axis and perpendicular to the transducer's sensing axis. This unique capability includes Hopkinson bars made of aluminum, steel, titanium, and beryllium. The bars are configured as both single and split Hopkinson bars. Four different areas that conclude this study are summarized in this paper: characterization of the cross-axis response of the accelerometer in the four environments of static compression, static strain on a beam, dynamic strain, and mechanical shock, the accelerometer's response on a titanium Hopkinson bar with two 45{degree} flats on the end of the bar; failure analysis of the accelerometer; and measurement of the accelerometer's self-generating cable response in a shock environment.

  2. Off-axis sawteeth and double-tearing reconnection in reversed magnetic shear plasmas in TFTR

    SciTech Connect

    Chang, Z.; Park, W.; Fredrickson, E.D.

    1996-06-01

    Off-axis sawteeth are often observed in reversed magnetic shear plasmas when the minimum safety factor q is near or below 2. Fluctuations with m/n = 2/1 (m and n are the poloidal and toroidal mode numbers) appear before and after the crashes. Detailed comparison has been made between the measured T{sub e} profile evolution during the crash and a nonlinear numerical magnetohydrodynamics (MHD) simulation. The good agreement between the observation and simulation indicates that the off-axis sawteeth are due to a double-tearing magnetic reconnection process.

  3. A method of calculation on the airloading of vertical axis wind turbine

    SciTech Connect

    Azuma, A.; Kimura, S.

    1983-08-01

    A new approach has been developed by using Local Circulation Method in order to analyze the aerodynamic characteristics of the Darrieus Type Vertical-Axis Wind Turbine. The validity of this method is assured in the aerodynamics of helicopter rotor and of horizontal-axis wind turbine. Results obtained by the present approach were compared with the test results conducted by Sandia National Laboratories and shown to be in good correlation with them. The azimuthwise variation of spanwise airloading, torque and longitudinal forces are well calculated for various operational conditions.

  4. A two-dimensional matrix correction for off-axis portal dose prediction errors

    SciTech Connect

    Bailey, Daniel W.; Kumaraswamy, Lalith; Bakhtiari, Mohammad; Podgorsak, Matthew B.

    2013-05-15

    Purpose: This study presents a follow-up to a modified calibration procedure for portal dosimetry published by Bailey et al. ['An effective correction algorithm for off-axis portal dosimetry errors,' Med. Phys. 36, 4089-4094 (2009)]. A commercial portal dose prediction system exhibits disagreement of up to 15% (calibrated units) between measured and predicted images as off-axis distance increases. The previous modified calibration procedure accounts for these off-axis effects in most regions of the detecting surface, but is limited by the simplistic assumption of radial symmetry. Methods: We find that a two-dimensional (2D) matrix correction, applied to each calibrated image, accounts for off-axis prediction errors in all regions of the detecting surface, including those still problematic after the radial correction is performed. The correction matrix is calculated by quantitative comparison of predicted and measured images that span the entire detecting surface. The correction matrix was verified for dose-linearity, and its effectiveness was verified on a number of test fields. The 2D correction was employed to retrospectively examine 22 off-axis, asymmetric electronic-compensation breast fields, five intensity-modulated brain fields (moderate-high modulation) manipulated for far off-axis delivery, and 29 intensity-modulated clinical fields of varying complexity in the central portion of the detecting surface. Results: Employing the matrix correction to the off-axis test fields and clinical fields, predicted vs measured portal dose agreement improves by up to 15%, producing up to 10% better agreement than the radial correction in some areas of the detecting surface. Gamma evaluation analyses (3 mm, 3% global, 10% dose threshold) of predicted vs measured portal dose images demonstrate pass rate improvement of up to 75% with the matrix correction, producing pass rates that are up to 30% higher than those resulting from the radial correction technique alone. As in

  5. Reconstruction of the Electron Density of Molecules with Single-Axis Alignment

    SciTech Connect

    Starodub, Dmitri

    2011-08-12

    Diffraction from the individual molecules of a molecular beam, aligned parallel to a single axis by a strong electric field or other means, has been proposed as a means of structure determination of individual molecules. As in fiber diffraction, all the information extractable is contained in a diffraction pattern from incidence of the diffracting beam normal to the molecular alignment axis. We present two methods of structure solution for this case. One is based on the iterative projection algorithms for phase retrieval applied to the coefficients of the cylindrical harmonic expansion of the molecular electron density. Another is the holographic approach utilizing presence of the strongly scattering reference atom for a specific molecule.

  6. Student's algorithm solves real-world problem

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Student's algorithm solves real-world problem Supercomputing Challenge: student's algorithm solves real-world problem Students learn how to use powerful computers to analyze, model, and solve real-world problems. April 3, 2012 Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge Jordon Medlock of Albuquerque's Manzano High School won the 2012 Lab-sponsored Supercomputing Challenge by creating a computer algorithm that automates the process of

  7. World-Class Test Facility Increases Efficiency of Solar Products...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    World-Class Test Facility Increases Efficiency of Solar Products World-Class Test Facility Increases Efficiency of Solar Products World-Class Test Facility Increases Efficiency of ...

  8. Republic of Macedonia-World Bank Climate Projects | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    World Bank Climate Projects Jump to: navigation, search Name Republic of Macedonia-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus...

  9. Gabon-World Bank Climate Activities | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Bank Climate Activities Jump to: navigation, search Name Gabon-World Bank Climate Activities AgencyCompany Organization World Bank Sector Land Focus Area Forestry Topics...

  10. Ukraine-World Bank Climate Projects | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Bank Climate Projects Jump to: navigation, search Name Ukraine-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy Focus Area Energy Efficiency...

  11. World Fuel Cell Council | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Fuel Cell Council Place: Frankfurt, Germany Zip: D-60313 Product: Its objective is to promote the most rapid commercialisation of this benign technology worldwide....

  12. Keeping Tabs on the World's Dangerous Chemicals

    Energy.gov [DOE]

    Sandia chemical engineer Nancy Jackson has worked in laboratories around the world to help ensure that chemicals are used safely and kept secure.

  13. The World Bank - Transport | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    provides relevant information about transport, focusing on The World Bank Transport Strategy - Safe, Clean and Affordable - Transport for Development. The website includes...

  14. World Wildlife Fund | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    5 References About "For more than 45 years, WWF has been protecting the future of nature. The world's leading conservation organization, WWF works in 100 countries and is...

  15. Renewable Energy World | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Renewable Energy World Place: United Kingdom Sector: Renewable Energy Product: Bimonthly magazine, which used to be published by James & James on the renewable energy industry. Now...

  16. World Wise Technologies Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wise Technologies Inc Jump to: navigation, search Name: World Wise Technologies Inc Place: Carson City, Nevada Zip: 89701 Sector: Renewable Energy Product: Develops renewable...

  17. World Power Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Power Technologies Jump to: navigation, search Name: World Power Technologies Place: Edison, NJ Information About Partnership with NREL Partnership with NREL Yes Partnership Type...

  18. World Waste Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Waste Technologies Jump to: navigation, search Name: World Waste Technologies Place: San Diego, California Sector: Biofuels Product: Technology developer that focuses on converting...

  19. Energy Secretary Moniz Dedicates World's Largest Concentrating...

    Energy Saver

    Ivanpah Solar Energy Generating System, the world's largest concentrating solar power (CSP) plant. ... to finance the first solar thermal storage project and the first power tower ...

  20. World Biotechnology Leaders to Gather for Conference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    private companies and research organizations, the annual event focuses on improving the economics of producing fuels and chemicals vital to the world's industrial sector. ...

  1. Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Peer Exchange Call Series: Swipe Left, Power Down: Using Interactive Media to Instill Behavior Change (301), call slides and discussion summary.

  2. Rotation Angle for the Optimum Tracking of One-Axis Trackers

    SciTech Connect

    Marion, W. F.; Dobos, A. P.

    2013-07-01

    An equation for the rotation angle for optimum tracking of one-axis trackers is derived along with equations giving the relationships between the rotation angle and the surface tilt and azimuth angles. These equations are useful for improved modeling of the solar radiation available to a collector with tracking constraints and for determining the appropriate motor revolutions for optimum tracking.

  3. Method for non-contact particle manipulation and control of particle spacing along an axis

    DOEpatents

    Goddard, Gregory Russ; Kaduchak, Gregory; Jett, James Hubert; Graves, Steven Wayde

    2013-09-10

    One or more of the embodiments of the present invention provide for a method of non-contact particle manipulation and control of particle spacing along an axis which includes axial and radial acoustic standing wave fields. Particles are suspended in an aqueous solution, and this solution then flows into the cylindrical flow channel. While the solution flows through the flow channel, the outer structure of the flow channel is vibrated at a resonant frequency, causing a radial acoustic standing wave field to form inside the flow channel in the solution. These radial acoustic standing waves focus the particles suspended in the solution to the center axis of the cylindrical flow channel. At the same time, a transducer is used to create an axial acoustic standing wave field in the flow channel parallel to the axis of the flow channel. This drives the particles, which are already being focused to the center axis of the flow channel, to nodes or anti-nodes of the axial standing wave at half-wavelength intervals, depending on whether the particles are more or less dense and more or less compressible than the surrounding fluid.

  4. Effect of strain along C-axis NbS{sub 2}

    SciTech Connect

    Singh, Tapender Kumar, Jagdish Sastri, O. S. K. S.

    2015-05-15

    We have studied electronic properties of double layered hexagonal structure of the Niobium Di-Sulphide (2H-NbS{sub 2}) superconductor for various strains introduced along the c-axis using ab-initio calculations. The DFT calculations based on Full Potential Linearized Augmented Plane Wave (FPLAPW) method are performed using the ELK code. The total energy curve (E vs a), Density of States (DOS) and the Band structure calculations obtained in this work are matching with the earlier reports. The Pressure-Volume (P-V) diagram for 2H-NbS{sub 2} was obtained using the Equation of State(EOS) calculations, which provides the relationship between the pressure and strain applied along the c-axis. The band structures for various strains ranging from 0 percent to 10 percent along c-axis in steps of 2 percent are obtained. We note that there are increasing number of bands crossing over the Fermi energy level with increase in strain. Thus, we conclude that with increasing strain along c-axis, number of conduction bands crossing the E{sub F} increases, which gives rise to more conduction states and hence higher conductivity.

  5. Developments in blade shape design for a Darrieus vertical axis wind turbine

    SciTech Connect

    Ashwill, T.D.; Leonard, T.M.

    1986-09-01

    A new computer program package has been developed that determines the troposkein shape for a Darrieus Vertical Axis Wind Turbine Blade with any geometrical configuration or rotation rate. This package allows users to interact and develop a ''buildable'' blade whose shape closely approximates the troposkein. Use of this package can significantly reduce flatwise mean bending stresses in the blade and increase fatigue life.

  6. Recent Darrieus vertical-axis wind turbine aerodynamical experiments at Sandia National Laboratories

    SciTech Connect

    Klimas, P.C.

    1981-01-01

    Experiments contributing to the understanding of the aerodynamics of airfoils operating in the vertical axis wind turbine (VAWT) environment are described. These experiments are ultimately intended to reduce VAWT cost of energy and increase system reliability. They include chordwise pressure surveys, circumferential blade acceleration surveys, effects of blade camber, pitch and offset, blade blowing, and use of sections designed specifically for VAWT application.

  7. A lightweight high performance dual-axis gimbal for space applications

    SciTech Connect

    Pines, D.J.; Hakala, D.B.; Malueg, R.

    1995-05-05

    This paper describes the design, development and performance of a lightweight precision gimbal with dual-axis slew capability to be used in a closed-loop optical tracking system at Lawrence Livermore National Laboratory-LLNL. The motivation for the development of this gimbal originates from the need to acquire and accurately localize warm objects (T{approximately}500 K) in a cluttered background. The design of the gimbal is centered around meeting the following performance requirements: pointing accuracy with control < 35 {mu}rad-(1-{omega}); slew capability > 0.2 rad/sec; mechanical weight < 5 kg. These performance requirements are derived by attempting to track a single target from multiple satellites in low Earth orbit using a mid-wave infrared camera. Key components in the gimbal hardware that are essential to meeting the performance objectives include a nickel plated beryllium mirro, an accurate lightweight capacitive pickoff device for angular measurement about the elevation axis, a 16-bit coarse/fine resolver for angular measurement about the azimuth axis, a toroidally wound motor with low hysteresis for providing torque about the azimuth axis, and the selection of beryllium parts to insure high stiffness to weight ratios and more efficient thermal conductivity. Each of these elements are discussed in detail to illustrate the design trades performed to meet the tracking and slewing requirements demanded. Preliminary experimental results are also given for various commanded tracking maneuvers.

  8. Accelerometer measurements of aerodynamic torque on the DOE/Sandia 17-m Vertical Axis Wind Turbine

    SciTech Connect

    McNerney, G.M.

    1981-04-01

    An experiment was conducted on the DOE/Sandia 17-m Vertical Axis Wind Turbine, using rotor shaft torque and rotor angular acceleration data to deduce the functional form of the aerodynamic torque. An analysis of the experiment, along with errors encountered, is presented and the results listed in both graphic and analytical form.

  9. Dual Axis Radiographic Hydrodynamic Test Facility mitigation action plan. Annual report for 1998

    SciTech Connect

    Haagenstad, T.

    1999-01-15

    This Mitigation Action Plan Annual Report (MAPAR) has been prepared as part of implementing the Dual Axis Radiographic Hydrodynamic Test Facility (DARHT) Mitigation Action Plan (MAP) to protect workers, soils, water, and biotic and cultural resources in and around the facility.

  10. The Brave New World of Buckytubes

    ScienceCinema

    Richard Smalley

    2016-07-12

    In a talk titled "The Brave New World of Buckytubes," Smalley discusses the basic science underlying the exotic chemical and physical properties, as well as the methods of production, purification, analysis, and assembly of buckytubes for solving real-world technological problems.

  11. NERSC's Contribution to the World's Supercomputing Communitiy

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Bill Kramer NERSC's Contribution to the World's Supercomputing Communitiy February 5, 2014 Bill Kramer, NCSA Downloads NERSC-Contributions-NERSC-40th-Anniversary-kramer.pdf | Adobe Acrobat PDF file NERSC's Contribution to the World's Supercomputing Communitiy Last edited: 2014-02-14 16:31:09

  12. DC 12m telescope. Preliminary calculations. Investigation of elevation axis position.

    SciTech Connect

    Guarino, V. J.; High Energy Physics

    2009-12-18

    This paper examines some simple calculations of a 2D model of a telescope in order to understand how different design parameters affect the design. For the design of a telescope it is assumed that they need a design that minimizes deflections of the dish and also minimizes the size of the motors and torques needed to rotate in elevation. A common belief is that a lighter dish and minimum counterweight is desirable. However, these calculations show this is not necessarily true. The torque needed for rotation depends on the moment of inertia and if the telescope is balanced about the elevation axis. A light dish with no CW requires that the elevation axis be several meters in front of the dish (8-9m) in order to be balanced. This is not practical from a structural point of view. If the elevation axis is only 2m in front of the dish and there is no counterweight then the telescope will be unbalanced and the toruqes required will be very high - much higher than the torques needed only to overcome inertia. A heavy dish though can act as its own counterweight and the elevation axis only has to be 2-3m in front of the dish in order to achieve a balanced telescope. Also the struts that support the camera from the dish place a load on the dish which will put a bending moment on the dish. This bending moment will deform the dish and require it to be stiffer. A counterweight structure performs two functions. First, it allows the telescope to be balanced about the elevation axis. Second, it applies a force on the dish that opposes the forces from the camera struts, thereby reducing the bending moment and deformations of the dish.

  13. SunShot-Supported Companies to Build One of the Worlds Largest Module Factories

    Energy.gov [DOE]

    EERE SunShot partners, Silevo and SolarCity have announced plans to join forces to build one of the worlds largest module factories in Buffalo, New York.

  14. Africa gaining importance in world LPG trade

    SciTech Connect

    Haun, R.R.; Otto, K.W.; Whitley, S.C.

    1997-05-12

    Major LPG projects planned or under way in Africa will increase the importance of that region`s presence in world LPG trade. Supplies will nearly double between 1995 and 2005, at which time they will remain steady for at least 10 years. At the same time that exports are leveling, however, increasing domestic demand for PG is likely to reduce export-market participation by Algeria, Nigeria, Egypt, and Libya. The growth of Africa`s participation in world LPG supply is reflected in comparisons for the next 15--20 years. Total world supply of LPG in 1995 was about 165 million metric tons (tonnes), of which Africans share was 7.8 million tonnes. By 2000, world supply will grow to slightly more than 200 million tonnes, with Africa`s share expected to increase to 13.2 million tonnes (6.6%). And by 2005, world LPG supply will reach nearly 230 million tonnes; Africa`s overall supply volumes by that year will be nearly 16.2 million tonnes (7%). World LPG supply for export in 1995 was on order of 44 million tonnes with Africa supply about 4 million tonnes (9%). By 2005, world export volumes of LPG will reach nearly 70 million tonnes; Africa`s share will have grown by nearly 10 million tonnes (14.3%).

  15. Axi-symmetrical flow reactor for [sup 196]Hg photochemical enrichment

    DOEpatents

    Grossman, M.W.

    1991-04-30

    The present invention is directed to an improved photochemical reactor useful for the isotopic enrichment of a predetermined isotope of mercury, especially, [sup 196]Hg. Specifically, two axi-symmetrical flow reactors were constructed according to the teachings of the present invention. These reactors improve the mixing of the reactants during the photochemical enrichment process, affording higher yields of the desired [sup 196]Hg product. Measurements of the variation of yield (Y) and enrichment factor (E) along the flow axis of these reactors indicates very substantial improvement in process uniformity compared to previously used photochemical reactor systems. In one preferred embodiment of the present invention, the photoreactor system was built such that the reactor chamber was removable from the system without disturbing the location of either the photochemical lamp or the filter employed therewith. 10 figures.

  16. Axi-symmetrical flow reactor for .sup.196 Hg photochemical enrichment

    DOEpatents

    Grossman, Mark W.

    1991-01-01

    The present invention is directed to an improved photochemical reactor useful for the isotopic enrichment of a predetermined isotope of mercury, especially, .sup.196 Hg. Specifically, two axi-symmetrical flow reactors were constructed according to the teachings of the present invention. These reactors improve the mixing of the reactants during the photochemical enrichment process, affording higher yields of the desired .sup.196 Hg product. Measurements of the variation of yield (Y) and enrichment factor (E) along the flow axis of these reactors indicates very substantial improvement in process uniformity compared to previously used photochemical reactor systems. In one preferred embodiment of the present invention, the photoreactor system was built such that the reactor chamber was removable from the system without disturbing the location of either the photochemical lamp or the filter employed therewith.

  17. Single-Axis Three-Beam Amplitude Monopulse Antenna-Signal Processing Issues

    SciTech Connect

    Doerry, Armin W.; Bickel, Douglas L.

    2015-05-01

    Typically, when three or more antenna beams along a single axis are required, the answer has been multiple antenna phase-centers, essentially a phase-monopulse system. Such systems and their design parameters are well-reported in the literature. Less appreciated is that three or more antenna beams can also be generated in an amplitude-monopulse fashion. Consequently, design guidelines and performance analysis of such antennas is somewhat under-reported in the literature. We provide discussion herein of three beams arrayed in a single axis with an amplitude-monopulse configuration. Acknowledgements The preparation of this report is the result of an unfunded research and development activity. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administ ration under contract DE-AC04-94AL85000.

  18. STATISTICAL ANALYSIS OF INTERFEROMETRIC MEASUREMENTS OF AXIS RATIOS FOR CLASSICAL Be STARS

    SciTech Connect

    Cyr, R. P.; Jones, C. E.; Tycner, C.

    2015-01-20

    This work presents a novel method to estimate the effective opening angle of CBe star disks from projected axis ratio measurements, obtained by interferometry using a statistical approach. A Monte Carlo scheme was used to generate a large set of theoretical axis ratios from disk models using different distributions of disk densities and opening angles. These theoretical samples were then compared to observational samples, using a two-sample Kolmogorov-Smirnov test, to determine which theoretical distribution best reproduces the observations. The results suggest that the observed ratio distributions in the K, H, and N band can best be explained by the presence of thin disks, with opening half-angles of the order of 0.°15-4.°0. Results for measurements over the Hα line point toward slightly thicker disks, 3.°7-14°, which is consistent with a flaring disk predicted by the viscous disk model.

  19. Dual-axis high-data-rate atom interferometer via cold ensemble exchange

    SciTech Connect

    Rakholia, Akash V.; McGuinness, Hayden J.; Biedermann, Grant W.

    2014-11-24

    We demonstrate a dual-axis accelerometer and gyroscope atom interferometer, which can form the building blocks of a six-axis inertial measurement unit. By recapturing the atoms after the interferometer sequence, we maintain a large atom number at high data rates of 50 to 100 measurements per second. Two cold ensembles are formed in trap zones located a few centimeters apart and are launched toward one another. During their ballistic trajectory, they are interrogated with a stimulated Raman sequence, detected, and recaptured in the opposing trap zone. As a result, we achieve sensitivities at ?g/ ?Hz and ?rad/s/ ?Hz levels, making this a compelling prospect for expanding the use of atom interferometer inertial sensors beyond benign laboratory environments.

  20. Dual-axis high-data-rate atom interferometer via cold ensemble exchange

    DOE PAGES [OSTI]

    Rakholia, Akash V.; McGuinness, Hayden J.; Biedermann, Grant W.

    2014-11-24

    We demonstrate a dual-axis accelerometer and gyroscope atom interferometer, which can form the building blocks of a six-axis inertial measurement unit. By recapturing the atoms after the interferometer sequence, we maintain a large atom number at high data rates of 50 to 100 measurements per second. Two cold ensembles are formed in trap zones located a few centimeters apart and are launched toward one another. During their ballistic trajectory, they are interrogated with a stimulated Raman sequence, detected, and recaptured in the opposing trap zone. As a result, we achieve sensitivities at μg/ √Hz and μrad/s/ √Hz levels, making thismore » a compelling prospect for expanding the use of atom interferometer inertial sensors beyond benign laboratory environments.« less

  1. Structural design of the Sandia 34-meter Vertical-Axis Wind Turbine

    SciTech Connect

    Berg, D.E.

    1985-04-01

    Sandia National Laboratories, as the lead Department of Energy laboratory for Vertical-Axis Wind Turbine development, is currently designing a 34-m diameter Darrieus-type vertical-axis wind turbine. This turbine will be a research test bed that provides a focus for advancing technology and validating design and fabrication techniques in a size range suitable for utility use. Structural data from this machine will allow structural modeling to be refined and verified for a turbine on which the gravity effects and stochastic wind loading are significant. Performance data from it will allow aerodynamic modeling to be refined and verified. This design effort incorporates Sandia's state-of-the-art analysis tools in the design of a complete machine. This report describes the analytic tools being used, summarizes the conceptual design procedure, and presents portions of the detailed design as it existed in September 1984.

  2. Sun-Relative Pointing for Dual-Axis Solar Trackers Employing Azimuth and Elevation Rotations

    DOE PAGES [OSTI]

    Riley, Daniel; Hansen, Clifford W.

    2014-12-30

    Dual axis trackers employing azimuth and elevation rotations are common in the field of photovoltaic (PV) energy generation. Accurate sun-tracking algorithms are widely available. However, a steering algorithm has not been available to accurately point the tracker away from the sun such that a vector projection of the sun beam onto the tracker face falls along a desired path relative to the tracker face. We have developed an algorithm which produces the appropriate azimuth and elevation angles for a dual axis tracker when given the sun position, desired angle of incidence, and the desired projection of the sun beam ontomore » the tracker face. Development of this algorithm was inspired by the need to accurately steer a tracker to desired sun-relative positions in order to better characterize the electro-optical properties of PV and CPV modules.« less

  3. Tracking formulas and strategies for a receiver oriented dual-axis tracking toroidal heliostat

    SciTech Connect

    Guo, Minghuan; Wang, Zhifeng; Liang, Wenfeng; Zhang, Xiliang; Zang, Chuncheng; Lu, Zhenwu; Wei, Xiudong

    2010-06-15

    A 4 m x 4 m toroidal heliostat with receiver oriented dual-axis tracking, also called spinning-elevation tracking, was developed as an auxiliary heat source for a hydrogen production system. A series of spinning-elevation tracking formulas have been derived for this heliostat. This included basic tracking formulas, a formula for the elevation angle for heliostat with a mirror-pivot offset, and a more general formula for the biased elevation angle. This paper presents the new tracking formulas in detail and analyzes the accuracy of applying a simplifying approximation. The numerical results show these receiver oriented dual-axis tracking formula approximations are accurate to within 2.5 x 10{sup -6} m in image plane. Some practical tracking strategies are discussed briefly. Solar images from the toroidal heliostat at selected times are also presented. (author)

  4. Sun-Relative Pointing for Dual-Axis Solar Trackers Employing Azimuth and Elevation Rotations

    SciTech Connect

    Riley, Daniel; Hansen, Clifford W.

    2014-12-30

    Dual axis trackers employing azimuth and elevation rotations are common in the field of photovoltaic (PV) energy generation. Accurate sun-tracking algorithms are widely available. However, a steering algorithm has not been available to accurately point the tracker away from the sun such that a vector projection of the sun beam onto the tracker face falls along a desired path relative to the tracker face. We have developed an algorithm which produces the appropriate azimuth and elevation angles for a dual axis tracker when given the sun position, desired angle of incidence, and the desired projection of the sun beam onto the tracker face. Development of this algorithm was inspired by the need to accurately steer a tracker to desired sun-relative positions in order to better characterize the electro-optical properties of PV and CPV modules.

  5. Three axis vector magnet set-up for cryogenic scanning probe microscopy

    SciTech Connect

    Galvis, J. A.; Herrera, E.; Buendía, A.; Guillamón, I.; Vieira, S.; Suderow, H.; Azpeitia, J.; Luccas, R. F.; Munuera, C.; García-Hernandez, M.; and others

    2015-01-15

    We describe a three axis vector magnet system for cryogenic scanning probe microscopy measurements. We discuss the magnet support system and the power supply, consisting of a compact three way 100 A current source. We obtain tilted magnetic fields in all directions with maximum value of 5T along z-axis and of 1.2T for XY-plane magnetic fields. We describe a scanning tunneling microscopy-spectroscopy (STM-STS) set-up, operating in a dilution refrigerator, which includes a new high voltage ultralow noise piezodrive electronics and discuss the noise level due to vibrations. STM images and STS maps show atomic resolution and the tilted vortex lattice at 150 mK in the superconductor β-Bi{sub 2}Pd. We observe a strongly elongated hexagonal lattice, which corresponds to the projection of the tilted hexagonal vortex lattice on the surface. We also discuss Magnetic Force Microscopy images in a variable temperature insert.

  6. Energy Secretary Moniz Dedicates World's Largest Concentrating...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    a world leader in solar energy," said Secretary Moniz. "As the President made clear in the State of the Union, we must continue to move toward a cleaner energy economy, and ...

  7. Once the World's Fastest Supercomputer; Central to

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    End of the road for Roadrunner March 29, 2013 Once the World's Fastest Supercomputer; Central to the Success of Stockpile Stewardship LOS ALAMOS, N. M., March 29, 2013-Roadrunner, ...

  8. World War II | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    end of World War II by sharing stories of their loved ones, viewing photographs and documents with Truman Library historians and listening to WWII veteran Max DeWeese reminisce ...

  9. Solar Dish Sets World-Record Efficiency

    Energy.gov [DOE]

    This photograph features the concentrating solar power (CSP) dish set a new world record for solar-to-grid conversion efficiency at 31.25 percent. The Stirling Energy Systems dish generates...

  10. Jefferson Lab is a world-leading ...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to the study of the building blocks of matter that make up 98 percent of our visible universe. Scientists from across the nation and around the world use the lab's facilities to...

  11. Berkeley Lab Particle Accelerator Sets World Record

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lab Particle Accelerator Sets World Record Berkeley Lab Particle Accelerator Sets World Record Simulations at NERSC Help Validate Experimental Laser-Plasma Design December 9, 2014 Contact: Kate Greene, kgreene@lbl.gov, 510-486-4404 particleaccelerator A 9 cm-long capillary discharge waveguide used in BELLA experiments to generate multi-GeV electron beams. The plasma plume has been made more prominent with the use of HDR photography. Image: Roy Kaltschmidt Using one of the most powerful lasers in

  12. Bringing Solutions to the Developing World

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Berkeley Lab: Bringing Solutions to the Developing World Efficient Cookstoves for Darfur, Ethiopia Women living in refugee camps in Darfur often walk miles to gather firewood. Volunteer Scott Sadlon trained workers in Darfur to assemble the Berkeley-Darfur stove, which is far more fuel-efficient than traditional stoves. ‹ › Billions of people around the world cook their meals on rudimentary stoves fueled by burning wood or other biomass, resulting in smoke and carbon emissions that both

  13. Crystal surface symmetry from zone-axis patterns in reflection high-energy-electron diffraction

    SciTech Connect

    Shannon, M.D.; Eades, J.A.; Meichle, M.E.; Turner, P.S.; Buxton, B.F.

    1984-11-26

    New experimental techniques, sensitive to crystal surface symmetry, for reflection high-energy-electron diffraction have been developed and applied to the (001) surface of MgO. The techniques map the variation of the intensity of one or more diffracted beams as a function of the incident-beam orientation. The symmetry of these surface zone-axis patterns has been studied theoretically and confirmed experimentally. The techniques are expected to provide a sensitive means of surface characterization.

  14. Double-multiple streamtube model for studying vertical-axis wind turbines

    SciTech Connect

    Paraschivoiu, I.

    1988-08-01

    This work describes the present state-of-the-art in double-multiple streamtube method for modeling the Darrieus-type vertical-axis wind turbine (VAWT). Comparisons of the analytical results with the other predictions and available experimental data show a good agreement. This method, which incorporates dynamic-stall and secondary effects, can be used for generating a suitable aerodynamic-load model for structural design analysis of the Darrieus rotor. 32 references.

  15. Method and apparatus for maintaining equilibrium in a helical axis stellarator

    DOEpatents

    Reiman, A.; Boozer, A.

    1984-10-31

    Apparatus for maintaining three-dimensional MHD equilibrium in a plasma contained in a helical axis stellarator includes a resonant coil system, having a configuration such that current therethrough generates a magnetic field cancelling the resonant magnetic field produced by currents driven by the plasma pressure on any given flux surface resonating with the rotational transform of another flux surface in the plasma. Current through the resonant coil system is adjusted as a function of plasma beta.

  16. Method and apparatus for maintaining equilibrium in a helical axis stellarator

    DOEpatents

    Reiman, Allan; Boozer, Allen

    1987-01-01

    Apparatus for maintaining three-dimensional MHD equilibrium in a plasma contained in a helical axis stellerator includes a resonant coil system, having a configuration such that current therethrough generates a magnetic field cancelling the resonant magnetic field produced by currents driven by the plasma pressure on any given flux surface resonating with the rotational transform of another flux surface in the plasma. Current through the resonant coil system is adjusted as a function of plasma beta.

  17. Updated Hubbert curves analyze world oil supply

    SciTech Connect

    Ivanhoe, L.F.

    1996-11-01

    The question is not whether, but when, world crude oil production will start to decline, ushering in the permanent oil shock era. While global information for predicting this event is not so straightforward as the data M. King Hubbert used in creating his famous Hubbert Curve that predicted the US (Lower 48 states, or US/48) 1970 oil production peak, there are strong indications that most of the world`s large exploration targets have now been found. Meanwhile, the earth`s population is exploding along with the oil needs of Asia`s developing nations. This article reviews Hubbert`s original analyses on oil discovery and production curves for the US/48 and projects his proven methodology onto global oil discoveries and production as of 1992. The world`s oil discovery curve peaked in 1962, and thence declined, as a Hubbert Curve predicts. However, global production was restricted after the 1973 Arab oil embargo. Otherwise, world production would have peaked in the mid-1990s. Two graphs show alternate versions of future global oil production.

  18. Annual collectible energy of a two-axis tracking flat-plate solar collector

    SciTech Connect

    Attalage, R.A.; Reddy, T.A. )

    1992-01-01

    A correlation for annual collectible energy of a two-axis tracking flat-plate solar collector has been developed using simulated results based on typical meteorological year (TMY) data for 26 US locations. A preliminary validation of this correlation has been carried out with data from four Australian locations. With the advent of increasing interest in photovoltaic systems, there are a number of advantages of using a two-axis flat-plate collector. Since the tracking system is generally much cheaper than the collector panel, such a mode permits the incident solar radiation to be collected more efficiently. Incidence angle effects are minimized and, moreover, contrary to concentrating collectors, such a mode enables both the diffuse and beam components of solar radiation to be collected. In tropical locations where the diffuse fraction is generally high, this may be a great advantage. The objective of this study was to develop a correlation for the annual collectible energy of a two-axis tracking flat-plate collector.

  19. Terahertz electron cyclotron maser interactions with an axis-encircling electron beam

    SciTech Connect

    Li, G. D.; Kao, S. H.; Chang, P. C.; Chu, K. R.

    2015-04-15

    To generate terahertz radiation via the electron cyclotron maser instability, harmonic interactions are essential in order to reduce the required magnetic field to a practical value. Also, high-order mode operation is required to avoid excessive Ohmic losses. The weaker harmonic interaction and mode competition associated with an over-moded structure present challenging problems to overcome. The axis-encircling electron beam is a well-known recipe for both problems. It strengthens the harmonic interaction, as well as minimizing the competing modes. Here, we examine these advantages through a broad data base obtained for a low-power, step-tunable, gyrotron oscillator. Linear results indicate far more higher-harmonic modes can be excited with an axis-encircling electron beam than with an off-axis electron beam. However, multi-mode, time-dependent simulations reveal an intrinsic tendency for a higher-harmonic mode to switch over to a lower-harmonic mode at a high beam current or upon a rapid current rise. Methods are presented to identify the narrow windows in the parameter space for stable harmonic interactions.

  20. Quasi-phase-matching of the dual-band nonlinear left-handed metamaterial

    SciTech Connect

    Liu, Yahong Song, Kun; Gu, Shuai; Liu, Zhaojun; Guo, Lei; Zhao, Xiaopeng; Zhou, Xin

    2014-11-17

    We demonstrate a type of nonlinear meta-atom creating a dual-band nonlinear left-handed metamaterial (DNLHM). The DNLHM operates at two distinct left-handed frequency bands where there is an interval of one octave between the two center frequencies. Under the illumination of a high-power signal at the first left-handed frequency band corresponding to fundamental frequency (FF), second-harmonic generation (SHG) is observed at the second left-handed band. This means that our DNLHM supports backward-propagating waves both at FF and second-harmonic (SH) frequency. We also experimentally demonstrate quasi-phase-matching configurations for the backward SHG. This fancy parametric process can significantly transmits the SH generated by an incident FF wave.

  1. Effects of blade preset pitch/offset on curved-blade Darrieus vertical axis wind turbine performance

    SciTech Connect

    Klimas, P.C.; Worstell, M.H.

    1981-10-01

    Current designs of curved-blade Darrieus vertical-axis wind turbines (VAWTs) have blades mounted in such a way that the position vector from the axis of rotation intersects the blade chord perpendicularly between the -25% and -50% chord points. This paper describes the effects on aerodynamic performance of the Sandia National Laboratories' (SNL) 5-m-dia turbine when its symmetrical cross-section blades are mounted such that the axis of rotation-blade chord position vector effects a normal intersection with the blade chord at points between -180% and +77% chord. These variations produce significant changes in cut-in tip-speed ratio, peak efficiency, and peak power.

  2. Selective Synthesis of "Left-Handed" or "Right-Handed" Chemicals |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Selective Service Registration Selective Service Registration Selective Service Registration (19.13 KB) More Documents & Publications Employee In-Processing Forms New Employee Orientation - Forms Checklist NTSF registration announcement The Ames Laboratory

    Selective Synthesis of "Left-Handed" or "Right-Handed" Chemicals A new series of catalysts is able to selectively make "left-handed" or "right-handed" nitrogen-containing compounds known as

  3. World NGL markets continue rapid expansion

    SciTech Connect

    Otto, K.; Gist, R.; Whitley, C.; Haun, R.

    1998-06-08

    The international LPG industry has expanded rapidly during the 1990s and undergone significant changes. LPG consumption has expanded at nearly twice the rate of world petroleum demand. In particular, LPG use in residential and commercial markets has more than doubled in many developing countries. Markets for LPG and other petroleum products have been opened in many countries, accelerating demand growth and creating investment opportunities in all downstream segments. This has led to an overall strengthening of global LPG pricing and the development of many new export gas-processing projects. The paper discusses world LPG demand in residential and commercial markets and in petrochemicals, world LPG supply, regional increases, international trade, the US situation in natural gas, NGL supply, and NGL demand.

  4. The World Renewable Energy Forum in Denver | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The World Renewable Energy Forum in Denver The World Renewable Energy Forum in Denver Addthis 1 of 12 Santiago Seage, CEO of Abengoa Solar speaks at the World Renewable Energy ...

  5. NREL Researcher is Top World Physicist

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    is Top World Physicist For more information contact: Kerry Masson, (303) 275-4083 e:mail: kerry_masson@nrel.gov Golden, Colo., March 17, 1998 — Dr. Alex Zunger, Institute Research Fellow at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), has been ranked as one of the top physicists in the world by the Institute of Scientific Information (ISI). The standing is based on the number of times his research has been cited by fellow scientists. Of the 517,111

  6. STEO January 2013 - world oil prices

    Energy Information Administration (EIA) (indexed site)

    Gap between U.S. and world oil prices to be cut by more than half over next two years The current wide price gap between a key U.S. and a world benchmark crude oil is expected to narrow significantly over the next two years. The spot price for U.S. benchmark West Texas Intermediate crude oil, also known as WTI , averaged $94 a barrel in 2012. That's $18 less than North Sea Brent oil, which is a global benchmark crude that had an average price of $112 last year. The new monthly forecast from the

  7. Turmoil at the Top of the World

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Turmoil at the Top of the World 1663 Los Alamos science and technology magazine Latest Issue:July 2016 past issues All Issues » submit Turmoil at the Top of the World The Arctic tundra is being drained and dried by the warming climate. July 21, 2016 arctic tundra signature pattern of polygons The Arctic tundra has a signature pattern of polygons due to complex interactions between soil and water-interactions that are being disrupted by the warming climate. "It's exciting but also scary. I

  8. Workplace Charging Challenge Partner: World Learning Inc. | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Learning Inc. Workplace Charging Challenge Partner: World Learning Inc. Workplace Charging Challenge Partner: World Learning Inc. Joined the Challenge: November 2014 Headquarters: Brattleboro, VT Charging Location: Brattleboro, VT Domestic Employees: 334 World Learning Inc. is a nonprofit organization advancing leadership in more than 60 countries. World Learning envisions a just world, driven by engaged citizens and thriving communities. SIT Graduate Institute is a program of World

  9. Measurements of isocenter path characteristics of the gantry rotation axis with a smartphone application

    SciTech Connect

    Schiefer, H. Peters, S.; Plasswilm, L.; Ingulfsen, N.; Kluckert, J.

    2015-03-15

    Purpose: For stereotactic radiosurgery, the AAPM Report No. 54 [AAPM Task Group 42 (AAPM, 1995)] requires the overall stability of the isocenter (couch, gantry, and collimator) to be within a 1 mm radius. In reality, a rotating system has no rigid axis and thus no isocenter point which is fixed in space. As a consequence, the isocenter concept is reviewed here. It is the aim to develop a measurement method following the revised definitions. Methods: The mechanical isocenter is defined here by the point which rotates on the shortest path in the room coordinate system. The path is labeled as “isocenter path.” Its center of gravity is assumed to be the mechanical isocenter. Following this definition, an image-based and radiation-free measurement method was developed. Multiple marker pairs in a plane perpendicular to the assumed gantry rotation axis of a linear accelerator are imaged with a smartphone application from several rotation angles. Each marker pair represents an independent measuring system. The room coordinates of the isocenter path and the mechanical isocenter are calculated based on the marker coordinates. The presented measurement method is by this means strictly focused on the mechanical isocenter. Results: The measurement result is available virtually immediately following completion of measurement. When 12 independent measurement systems are evaluated, the standard deviations of the isocenter path points and mechanical isocenter coordinates are 0.02 and 0.002 mm, respectively. Conclusions: The measurement is highly accurate, time efficient, and simple to adapt. It is therefore suitable for regular checks of the mechanical isocenter characteristics of the gantry and collimator rotation axis. When the isocenter path is reproducible and its extent is in the range of the needed geometrical accuracy, it should be taken into account in the planning process. This is especially true for stereotactic treatments and radiosurgery.

  10. Visualization of World Energy Supply | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    isualizationofWorldEnergySupply Cost: Free OpenEI Keyword(s): Community Generated Language: English References: OECD1 Motion chart visualization of the world energy supply...

  11. Fall Lectures Feature Life of Einstein; Exploring Our World With...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Fall Lectures Feature Life of Einstein; Exploring Our World With Particle Accelerators Fall Lectures Feature Life of Einstein; Exploring Our World With Particle Accelerators ...

  12. Fact #840: September 29, 2014 World Renewable Electricity Consumption...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    29, 2014 World Renewable Electricity Consumption is Growing - Dataset Fact 840: September 29, 2014 World Renewable Electricity Consumption is Growing - Dataset Excel file with ...

  13. Making Development Climate Resilient: A World Bank Strategy for...

    OpenEI (Open Energy Information) [EERE & EIA]

    Development Climate Resilient: A World Bank Strategy for Sub-Saharan Africa Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Making Development Climate Resilient: A World...

  14. Entech Solar Inc formerly WorldWater Solar Technologies | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Solar Inc formerly WorldWater Solar Technologies Jump to: navigation, search Name: Entech Solar Inc. (formerly WorldWater & Solar Technologies) Place: Fort Worth, Texas Zip: 76177...

  15. Chasing the Sun: Solar Adventures Around the World | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Chasing the Sun: Solar Adventures Around the World Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Chasing the Sun: Solar Adventures Around the World AgencyCompany...

  16. Competition Provides Students with Real-World Engineering Experience...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Competition Provides Students with Real-World Engineering Experience Competition Provides Students with Real-World Engineering Experience April 10, 2013 - 12:00am Addthis Fifteen...

  17. World Bank-Climate Change Knowledge Portal | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Climate Change Knowledge Portal Jump to: navigation, search Logo: World Bank-Climate Change Knowledge Portal Name World Bank-Climate Change Knowledge Portal AgencyCompany...

  18. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - ...

  19. India-World Bank Climate Projects | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Name India-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus Area Energy Efficiency, Renewable Energy Topics Background analysis...

  20. Philippines-World Bank Climate Projects | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Philippines-World Bank Climate Projects AgencyCompany Organization World Bank Sector Energy, Land Focus Area Renewable Energy, Energy Efficiency, Geothermal Topics Background...

  1. EERE Success Story-Solar Junction Develops World Record Setting...

    Office of Environmental Management (EM)

    Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell ...

  2. Clean World Capital A S | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Capital A S Jump to: navigation, search Name: Clean World Capital AS Place: Lyngby, Denmark Sector: Carbon Product: A cleantech finance house based in Copenhagen and London....

  3. Georgia-World Bank Climate Projects | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Projects Jump to: navigation, search Name Georgia-World Bank Climate Projects AgencyCompany Organization World Bank Focus Area Renewable Energy, Hydro Topics Background analysis...

  4. Top of the World (Siemens) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Siemens) Jump to: navigation, search Name Top of the World (Siemens) Facility Top of the World (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  5. Laser Focus World highlights Kaminski's home-grown ARPES spectroscopy...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laser Focus World highlights Kaminski's home-grown ARPES spectroscopy system Laser Focus World senior editor Gail Overton wrote a story on angled-resolved photo-emission...

  6. Invention Factor: How Will The World Get Smaller | GE Global...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    is changing the manufacturing process for jet engines and opening up the world of air ... to the Real World in 10 Years primusenginefeaturedimage3 GE Innovation and ...

  7. World Geothermal Power Generation 2001-2005 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    dismantled. Author Ruggero Bertani Conference World Geothermal Congress; Antalya, Turkey; 20050424 Published World Geothermal Congress, 2005 DOI Not Provided Check for DOI...

  8. Energy Advising Services in the Post-ARRA World | Department...

    Energy Saver

    Advising Services in the Post-ARRA World Energy Advising Services in the Post-ARRA World Better Buildings Residential Network Workforce Business Partners Peer Exchange Call: ...

  9. Microsoft Word - Wireless Automation World for OE FINAL.doc

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper ...

  10. Three axis electronic flight motion simulator real time control system design and implementation

    SciTech Connect

    Gao, Zhiyuan; Miao, Zhonghua Wang, Xiaohua; Wang, Xuyong

    2014-12-15

    A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

  11. Wake Studies at the Flowind Vertical Axis Wind Turbine Generator Site.

    SciTech Connect

    Baker, Robert W.; Walker, Stel Nathan; Katen, Paul C.

    1984-03-01

    In a continuing effort to study and characterize various types and sizes of wind turbine generator wakes a test program was conducted at the FloWind 170 kW vertical axis wind turbine (VAWT) near Ellensburg, Washington. Oregon State University (OSU) scientists measured the wake behind the 90 ft. tall Darrieus VAWT using fixed place and portable kite anemometers. Downwind velocity deficits were measured from 3-9 diameters along the wake centerline at rotor midpoint (55 ft.) and perpendicular to the wake. Wake turbulence characteristics were also measured. The measured velocity deficits were compared to wake model calculations.

  12. Pressure distributions on an operating vertical-axis wind-turbine blade element

    SciTech Connect

    Akins, R.E.; Klimas, P.C.; Croll, R.H.

    1983-01-01

    Efforts to validate aerodynamic models of vertical-axis wind turbines have been limited by a lack of appropriate measurements as stall begins to occur along the blade. In order to measure the forces acting on a blade through stall and in post-stall, a blade has been instrumented using flush-mounted pressure transducers. Data have been obtained on an appropriate range of turbine operating conditions. These data indicate that at high incident wind speeds, dynamic stall occurs on the upwind portion of the rotation.

  13. Rotor instrumentation circuits for the Sandia 34-meter vertical axis wind turbine

    SciTech Connect

    Sutherland, H.J.; Stephenson, W.A.

    1988-07-01

    Sandia National Laboratories has erected a research oriented, 34-meter diameter, Darrieus vertical axis wind turbine near Bushland, Texas, which has been designated the Sandia 34-m VAWT Test Bed. To meet present and future research needs, the machine was equipped with a large array of sensors. This manuscript details the sensors initially placed on the rotor, their respective instrumentation circuits, and the provisions incorporated into the design of the rotor instrumentation circuits for future research. This manuscript was written as a reference manual for the rotor instrumentation of the Test Bed. 16 refs., 8 figs., 7 tabs.

  14. Design and fabrication of a Darrieus/Savonius hybrid vertical-axis wind turbine

    SciTech Connect

    Bell, B.F.

    1983-09-01

    This report presents the results of a design and analysis of a Darrieus/Savonius hybrid vertical-axis wind turbine. The system described is a utility interfaced 3-m turbine/1-kW generator designed to be cost effective in 5.4 m/s (12 mph) average wind sites. Included are the review of design efforts in the areas of aerodynamics and structural analysis; and preliminary design details of the 3-m/1-kW Darrieus/Savonius turbine (DST).

  15. Testing appropriateness of small scale vertical axis windmills. Final progress report

    SciTech Connect

    Dengler, T.

    1984-04-26

    A comparative evaluation was performed on three vertical axis windmills; Darrieus, rotating bucket and flexible, to determine which of the three was the most practical for the homeowner to construct and use to supplement electric consumption. The design and construction of the windmills are summarized. Visual observations were made on the behavior of the windmills and an anemometer was installed for the purpose of collecting data on windmill performance in different wind velocities. Results showed that the Darrieus windmill performed best, followed closely by the flexible vane. The rotating bucket was found to be a poor performer.

  16. Proceedings of the vertical axis wind turbine (VAWT) design technology seminar for industry

    SciTech Connect

    Johnston, S.F. Jr.

    1980-08-01

    The objective of the Vertical Axis Wind Turbine (VAWT) Program at Sandia National Laboratories is to develop technology that results in economical, industry-produced, and commercially marketable wind energy systems. The purpose of the VAWT Design Technology Seminar or Industry was to provide for the exchange of the current state-of-the-art and predictions for future VAWT technology. Emphasis was placed on technology transfer on Sandia's technical developments and on defining the available analytic and design tools. Separate abstracts are included for presented papers.

  17. Three-dimensional Numerical Analysis on Blade Response of Vertical Axis Tidal Current Turbine Under Operational Condition

    SciTech Connect

    Li, Ye; Karri, Naveen K.; Wang, Qi

    2014-04-30

    Tidal power as a large-scale renewable source of energy has been receiving significant attention recently because of its advantages over the wind and other renewal energy sources. The technology used to harvest energy from tidal current is called a tidal current turbine. Though some of the principles of wind turbine design are applicable to tidal current turbines, the design of latter ones need additional considerations like cavitation damage, corrosion etc. for the long-term reliability of such turbines. Depending up on the orientation of axis, tidal current turbines can be classified as vertical axis turbines or horizontal axis turbines. Existing studies on the vertical axis tidal current turbine focus more on the hydrodynamic aspects of the turbine rather than the structural aspects. This paper summarizes our recent efforts to study the integrated hydrodynamic and structural aspects of the vertical axis tidal current turbines. After reviewing existing methods in modeling tidal current turbines, we developed a hybrid approach that combines discrete vortex method -finite element method that can simulate the integrated hydrodynamic and structural response of a vertical axis turbine. This hybrid method was initially employed to analyze a typical three-blade vertical axis turbine. The power coefficient was used to evaluate the hydrodynamic performance, and critical deflection was considered to evaluate the structural reliability. A sensitivity analysis was also conducted with various turbine height-to-radius ratios. The results indicate that both the power output and failure probability increase with the turbine height, suggesting a necessity for optimal design. An attempt to optimize a 3-blade vertical axis turbine design with hybrid method yielded a ratio of turbine height to radius (H/R) about 3.0 for reliable maximum power output.

  18. Process and apparatus for measuring degree of polarization and angle of major axis of polarized beam of light

    DOEpatents

    Decker, Derek E.; Toeppen, John S.

    1994-01-01

    Apparatus and process are disclosed for calibrating measurements of the phase of the polarization of a polarized beam and the angle of the polarized optical beam's major axis of polarization at a diagnostic point with measurements of the same parameters at a point of interest along the polarized beam path prior to the diagnostic point. The process is carried out by measuring the phase angle of the polarization of the beam and angle of the major axis at the point of interest, using a rotatable polarizer and a detector, and then measuring these parameters again at a diagnostic point where a compensation apparatus, including a partial polarizer, which may comprise a stack of glass plates, is disposed normal to the beam path between a rotatable polarizer and a detector. The partial polarizer is then rotated both normal to the beam path and around the axis of the beam path until the detected phase of the beam polarization equals the phase measured at the point of interest. The rotatable polarizer at the diagnostic point may then be rotated manually to determine the angle of the major axis of the beam and this is compared with the measured angle of the major axis of the beam at the point of interest during calibration. Thereafter, changes in the polarization phase, and in the angle of the major axis, at the point of interest can be monitored by measuring the changes in these same parameters at the diagnostic point.

  19. Carbon Smackdown: Cookstoves for the developing world

    ScienceCinema

    Ashok Gadgil, Kayje Booker, and Adam Rausch

    2016-07-12

    In this June 30, 2010 Berkeley Lab summer lecture, learn how efficient cookstoves for the developing world — from Darfur to Ethiopia and beyond — are reducing carbon dioxide emissions, saving forests, and improving health. Berkeley Lab's Ashok Gadgil, Kayje Booker, and Adam Rausch discuss why they got started in this great challenge and what's next.

  20. Synthesis of c-axis oriented AlN thin films on different substrates: A review

    SciTech Connect

    Iriarte, G.F.

    2010-09-15

    Highly c-axis oriented AlN thin films have been deposited by reactive sputtering on different substrates. The crystallographic properties of layered film structures consisting of a piezoelectric layer, aluminum nitride (AlN), synthesized on a variety of substrates, have been examined. Aluminum nitride thin films have been deposited by reactive pulsed-DC magnetron sputtering using an aluminum target in an Ar/N{sub 2} gas mixture. The influence of the most critical deposition parameters on the AlN thin film crystallography has been investigated by means of X-ray diffraction (XRD) analysis of the rocking curve Full-Width at Half Maximum (FWHM) of the AlN-(0 0 0 2) peak. The relationship between the substrate, the synthesis parameters and the crystallographic orientation of the AlN thin films is discussed. A guide is provided showing how to optimize these conditions to obtain highly c-axis oriented AlN thin films on substrates of different nature.

  1. Aerodynamic analysis of a 10 kW horizontal-axis windmill

    SciTech Connect

    Figard, R.L.

    1980-01-01

    An aerodynamic study of the performance and the flowfield in the vicinity of the rotor of a three bladed 10 kW, horizontal-axis windmill is presented. The windmill has a 6.38 m (20.92 ft) diameter rotor and is rated at 10 kW in a 13.41 m/s (44.0 fps) wind. Three basic approaches are utilized. First, field measurements of the performance and the axial velocity and turbulence behind the rotor were conducted. Second, wind tunnel tests of a 1:5 scale model were performed. Third, theoretical analyses of the windmill were made. This included performance predictions with a computerized, modified blade element (vortex theory) analysis and the development and utilization of a numerical procedure employing the full Navier-Stokes equations in axi-symmetric form to examine the wake development in detail. In that effort the rotor is modeled by an actuator disk in a uniform flow, a simple turbulence transport model based on an integrated TKE equation is applied, and the equations of motion are taken in terms of the stream function, one vorticity component, and the peripheral velocity. The results of each of the three approaches shows agreement within 10 to 15% with the other two approaches.

  2. Continuous wavelength tunable laser source with optimum positioning of pivot axis for grating

    DOEpatents

    Pushkarsky, Michael; Amone, David F.

    2010-06-08

    A laser source (10) for generating a continuously wavelength tunable light (12) includes a gain media (16), an optical output coupler (36F), a cavity collimator (38A), a diffraction grating (30), a grating beam (54), and a beam attacher (56). The diffraction grating (30) is spaced apart from the cavity collimator (38A) and the grating (30) cooperates with the optical output coupler (36F) to define an external cavity (32). The grating (30) includes a grating face surface (42A) that is in a grating plane (42B). The beam attacher (56) retains the grating beam (54) and allows the grating beam (54) and the grating (30) to effectively pivot about a pivot axis (33) that is located approximately at an intersection of a pivot plane (50) and the grating plane (42B). As provided herein, the diffraction grating (30) can be pivoted about the unique pivot axis (33) to move the diffraction grating (30) relative to the gain media (16) to continuously tune the lasing frequency of the external cavity (32) and the wavelength of the output light (12) so that the output light (12) is mode hop free.

  3. Development of a MEMS dual-axis differential capacitance floating element shear stress sensor

    SciTech Connect

    Barnard, Casey; Griffin, Benjamin

    2015-09-01

    A single-axis MEMS wall shear stress sensor with differential capacitive transduction method is produced. Using a synchronous modulation and demodulation interface circuit, the system is capable of making real time measurements of both mean and fluctuating wall shear stress. A sensitivity of 3.44 mV/Pa is achieved, with linearity in response demonstrated up to testing limit of 2 Pa. Minimum detectable signals of 340 μPa at 100 Hz and 120 μPa at 1 kHz are indicated, with a resonance of 3.5 kHz. Multiple full scale wind tunnel tests are performed, producing spectral measurements of turbulent boundary layers in wind speeds ranging up to 0.5 Ma (18 Pa of mean wall shear stress). The compact packaging allows for minimally invasive installation, and has proven relatively robust over multiple testing events. Temperature sensitivity, likely due to poor CTE matching of packaged materials, is an ongoing concern being addressed. These successes are being directly leveraged into a development plan for a dual-axis wall shear stress sensor, capable of producing true vector estimates at the wall.

  4. Two-axis Beam Steering Mirror Control system for Precision Pointing and Tracking Applications

    SciTech Connect

    Ulander, K

    2006-02-08

    Precision pointing and tracking of laser beams is critical in numerous military and industrial applications. This is particularly true for systems requiring atmospheric beam propagation. Such systems are plagued by environmental influences which cause the optical signal to break up and wander. Example applications include laser communications, precision targeting, active imaging, chemical remote sensing, and laser vibrometry. The goal of this project is to build a beam steering system using a two-axis mirror to maintain precise pointing control. Ultimately, position control to 0.08% accuracy (40 {micro}rad) with a bandwidth of 200 Hz is desired. The work described encompasses evaluation of the instrumentation system and the subsequent design and implementation of an analog electronic controller for a two-axis mirror used to steer the beam. The controller operates over a wide temperature range, through multiple mirror resonances, and is independent of specific mirrors. The design was built and successfully fielded in a Lawrence Livermore National Laboratory free-space optics experiment. All measurements and performance parameters are derived from measurements made on actual hardware that was built and field tested. In some cases, specific design details have been omitted that involve proprietary information pertaining to Lawrence Livermore National Laboratory patent positions and claims. These omissions in no way impact the general validity of the work or concepts presented in this thesis.

  5. A multichannel magnetic probe system for analysing magnetic fluctuations in helical axis plasmas

    SciTech Connect

    Haskey, S. R.; Blackwell, B. D.; Seiwald, B.; Hole, M. J.; Pretty, D. G.; Howard, J.; Wach, J. [Plasma Research Laboratory, Research School of Physical Sciences and Engineering, The Australian National University, Canberra, ACT 0200 (Australia)] [Plasma Research Laboratory, Research School of Physical Sciences and Engineering, The Australian National University, Canberra, ACT 0200 (Australia)

    2013-09-15

    The need to understand the structure of magnetic fluctuations in H-1NF heliac [S. Hamberger et al., Fusion Technol. 17, 123 (1990)] plasmas has motivated the installation of a sixteen former, tri-axis helical magnetic probe Mirnov array (HMA). The new array complements two existing poloidal Mirnov arrays by providing polarisation information, higher frequency response, and improved toroidal resolution. The helical placement is ideal for helical axis plasmas because it positions the array as close as possible to the plasma in regions of varying degrees of favourable curvature in the magnetohydrodynamic sense, but almost constant magnetic angle. This makes phase variation with probe position near linear, greatly simplifying the analysis of the data. Several of the issues involved in the design, installation, data analysis, and calibration of this unique array are presented including probe coil design, frequency response measurements, mode number identification, orientation calculations, and mapping probe coil positions to magnetic coordinates. Details of specially designed digitally programmable pre-amplifiers, which allow gains and filters to be changed as part of the data acquisition initialisation sequence and stored with the probe signals, are also presented. The low shear heliac geometry [R. Jimnez-Gmez et al., Nucl. Fusion 51, 033001 (2011)], flexibility of the H-1NF heliac, and wealth of information provided by the HMA create a unique opportunity for detailed study of Alfvn eigenmodes, which could be a serious issue for future fusion reactors.

  6. Simulation of winds as seen by a rotating vertical axis wind turbine blade

    SciTech Connect

    George, R.L.

    1984-02-01

    The objective of this report is to provide turbulent wind analyses relevant to the design and testing of Vertical Axis Wind Turbines (VAWT). A technique was developed for utilizing high-speed turbulence wind data from a line of seven anemometers at a single level to simulate the wind seen by a rotating VAWT blade. Twelve data cases, representing a range of wind speeds and stability classes, were selected from the large volume of data available from the Clayton, New Mexico, Vertical Plane Array (VPA) project. Simulations were run of the rotationally sampled wind speed relative to the earth, as well as the tangential and radial wind speeds, which are relative to the rotating wind turbine blade. Spectral analysis is used to compare and assess wind simulations from the different wind regimes, as well as from alternate wind measurement techniques. The variance in the wind speed at frequencies at or above the blade rotation rate is computed for all cases, and is used to quantitatively compare the VAWT simulations with Horizontal Axis Wind Turbine (HAWT) simulations. Qualitative comparisons are also made with direct wind measurements from a VAWT blade.

  7. Validating agent based models through virtual worlds.

    SciTech Connect

    Lakkaraju, Kiran; Whetzel, Jonathan H.; Lee, Jina; Bier, Asmeret Brooke; Cardona-Rivera, Rogelio E.; Bernstein, Jeremy Ray Rhythm

    2014-01-01

    As the US continues its vigilance against distributed, embedded threats, understanding the political and social structure of these groups becomes paramount for predicting and dis- rupting their attacks. Agent-based models (ABMs) serve as a powerful tool to study these groups. While the popularity of social network tools (e.g., Facebook, Twitter) has provided extensive communication data, there is a lack of ne-grained behavioral data with which to inform and validate existing ABMs. Virtual worlds, in particular massively multiplayer online games (MMOG), where large numbers of people interact within a complex environ- ment for long periods of time provide an alternative source of data. These environments provide a rich social environment where players engage in a variety of activities observed between real-world groups: collaborating and/or competing with other groups, conducting battles for scarce resources, and trading in a market economy. Strategies employed by player groups surprisingly re ect those seen in present-day con icts, where players use diplomacy or espionage as their means for accomplishing their goals. In this project, we propose to address the need for ne-grained behavioral data by acquiring and analyzing game data a commercial MMOG, referred to within this report as Game X. The goals of this research were: (1) devising toolsets for analyzing virtual world data to better inform the rules that govern a social ABM and (2) exploring how virtual worlds could serve as a source of data to validate ABMs established for analogous real-world phenomena. During this research, we studied certain patterns of group behavior to compliment social modeling e orts where a signi cant lack of detailed examples of observed phenomena exists. This report outlines our work examining group behaviors that underly what we have termed the Expression-To-Action (E2A) problem: determining the changes in social contact that lead individuals/groups to engage in a particular behavior

  8. The World's Largest 3D Printed Object | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The World's Largest 3D Printed Object The World's Largest 3D Printed Object Addthis The Guinness Book of World Records just certified that the Department of Energy's Oak Ridge National Laboratory produced the world's largest solid 3D-printed object

  9. Thematic World Wide Web Visualization System

    Energy Science and Technology Software Center

    1996-10-10

    WebTheme is a system designed to facilitate world wide web information access and retrieval through visualization. It consists of two principal pieces, a WebTheme Server which allows users to enter in a query and automatocally harvest and process information of interest, and a WebTheme browser, which allows users to work with both Galaxies and Themescape visualizations of their data within a JAVA capable world wide web browser. WebTheme is an Internet solution, meaning that accessmore » to the server and the resulting visualizations can all be performed through the use of a WWW browser. This allows users to access and interact with SPIRE (Spatial Paradigm for Information Retrieval and Exploration) based visualizations through a web browser regardless of what computer platforms they are running on. WebTheme is specifically designed to create databases by harvesting and processing WWW home pages available on the Internet.« less

  10. Biotechnology takes root in the third world

    SciTech Connect

    Gibbons, A.

    1990-05-25

    Biotechnology offers the hope of increasing crop yields in the highland of communist Viet Nam. Thirty Vietnamese families have been culturing potato seedlings for planting. Their potato progeny earn the families $100 to $120 a month, a considerable sum in rural Viet Nam. Some of the farmers are starting to use the same techniques to propagate other vegetables in vitro. This is proof that biotechnology can be beneficial in developing nations. Now agriculture in countries from Indonesia to Ecuador is gaining from biotechnology, thereby helping them compete in the international marketplace. Third World leaders want their own biotech centers and to set their own research agendas, rather than relying on the First World to decide what genetically engineered crops would be most useful for them.

  11. Workplace Charging Challenge Partner: SolarWorld | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    SolarWorld Workplace Charging Challenge Partner: SolarWorld Workplace Charging Challenge Partner: SolarWorld Joined the Challenge: June 2014 Headquarters: Hillsboro, OR Charging Location: Hillsboro, OR Domestic Employees: 700 As the largest solar manufacturer in the U.S. and Europe, SolarWorld's commitment to sustainability is embedded in every aspect of its business and documented in its annual report. In keeping with its climate protection goals, SolarWorld installed its first workplace

  12. Toluene diisocyanate: Induction of the autotaxin-lysophosphatidic acid axis and its association with airways symptoms

    SciTech Connect

    Broström, Julia M.; Ye, Zhi-wei; Axmon, Anna; Littorin, Margareta; Tinnerberg, Håkan; Lindh, Christian H.; Zheng, Huiyuan; Ghalali, Aram; Stenius, Ulla; Jönsson, Bo A.G.; Högberg, Johan

    2015-09-15

    Diisocyanates are industrial chemicals which have a wide range of applications in developed and developing countries. They are notorious lung toxicants and respiratory sensitizers. However, the mechanisms behind their adverse effects are not adequately characterized. Autotaxin (ATX) is an enzyme producing lysophosphatidic acid (LPA), and the ATX-LPA axis has been implicated in lung related inflammatory conditions and diseases, including allergic asthma, but not to toxicity of environmental low-molecular-weight chemicals. We investigated effects of toluene diisocyanate (TDI) on ATX induction in human lung epithelial cell models, and we correlated LPA-levels in plasma to biomarkers of TDI exposure in urine collected from workers exposed to < 5 ppb (parts per billion). Information on workers' symptoms was collected through interviews. One nanomolar TDI robustly induced ATX release within 10 min in vitro. A P2X7- and P2X4-dependent microvesicle formation was implicated in a rapid ATX release and a subsequent protein synthesis. Co-localization between purinergic receptors and ATX was documented by immunofluorescence and confocal microscopy. The release was modulated by monocyte chemoattractant protein-1 (MCP-1) and by extracellular ATP. In workers, we found a dose–response relationship between TDI exposure biomarkers in urine and LPA levels in plasma. Among symptomatic workers reporting “sneezing”, the LPA levels were higher than among non-symptomatic workers. This is the first report indicating induction of the ATX-LPA axis by an environmental low-molecular-weight chemical, and our data suggest a role for the ATX-LPA axis in TDI toxicity. - Highlights: • Human epithelial cells release autotaxin in response to 1 nM toluene diisocyanate (TDI). • The release involves P2X4 and P2X7 receptors and is modulated by ATP and MCP-1. • Lysophosphatidic acid (LPA) was measured in workers exposed to < 5 ppb TDI. • LPA in plasma correlated to TDI exposure biomarkers in

  13. Right/left assignment in drift chambers and proportional multiwire chambers (PWC's) using induced signals

    DOEpatents

    Walenta, Albert H.

    1979-01-01

    Improved multiwire chamber having means for resolving the left/right ambiguity in the location of an ionizing event. The chamber includes a plurality of spaced parallel anode wires positioned between spaced planar cathodes. Associated with each of the anode wires are a pair of localizing wires, one positioned on either side of the anode wire. The localizing wires are connected to a differential amplifier whose output polarity is determined by whether the ionizing event occurs to the right or left of the anode wire.

  14. SEP Success Story: Turkey Hill Dairy: Where Energy is Not Left Flapping in

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the Wind | Department of Energy Turkey Hill Dairy: Where Energy is Not Left Flapping in the Wind SEP Success Story: Turkey Hill Dairy: Where Energy is Not Left Flapping in the Wind December 21, 2011 - 11:57am Addthis These two General Electric wind turbines, erected in January 2011 on the Frey Farm landfill adjacent to Turkey Hill Dairy's ice cream and sweet iced tea plant in Lancaster County, Penn., are expected to produce 7.5 million kWh of electricity annually. | Photo courtesy of

  15. World energy: Building a sustainable future

    SciTech Connect

    Schipper, L.; Meyers, S.

    1992-04-01

    As the 20th century draws to a close, both individual countries and the world community face challenging problems related to the supply and use energy. These include local and regional environmental impacts, the prospect of global climate and sea level change associated with the greenhouse effect, and threats to international relations in connection with oil supply or nuclear proliferation. For developing countries, the financial cost of providing energy to provide basic needs and fuel economic development pose an additional burden. To assess the magnitude of future problems and the potential effectiveness of response strategies, it is important to understand how and why energy use has changed in the post and where it is heading. This requires study of the activities for which energy is used, and of how people and technology interact to provide the energy services that are desired. The authors and their colleagues have analyzed trends in energy use by sector for most of the world`s major energy-consuming countries. The approach we use considers three key elements in each sector: the level of activity, structural change, and energy intensity, which expresses the amount of energy used for various activities. At a disaggregated level, energy intensity is indicative of energy efficiency. But other factors besides technical efficiency also shape intensity.

  16. The growing world LP-gas supply

    SciTech Connect

    Hoare, M.C.

    1988-11-01

    The possible range of future (LPG) export availabilities is huge, but actual production levels depend on factors, many of which are beyond our direct control - world demand for crude oil and gas, developments in technology, and the price of both energy in general and LPG specifically. Although these factors limit some of the potential developments, a substantial increase in LPG supply is certain, and this is likely to depress its price relative to other products. Over the last few years, a dramatic expansion has taken place in the industry. From 1980 to 1987, non-Communist world production of LPG increased by close to 35%, to a total of 115 million tonnes. If this is set against the general energy scene, LPG represented 3.7% of crude oil production by weight in 1980, rising to 5.4% in 1987. This growth reflects rise in consciousness around the world of the value of the product. LPG is no longer regarded as a byproduct, which is flared or disposed of at low value, but increasingly as a co-product, and much of the growth in production has been due to the installation of tailored recovery systems. LPG markets historically developed around sources of supply, constrained by the costs of transportation. The major exceptions, of course, were the Middle East, the large exporter, and Japan, the large importer.

  17. Bridging the Nano-World and the Real World in Polymer Solar Cells | U.S.

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOE Office of Science (SC) Bridging the Nano-World and the Real World in Polymer Solar Cells Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) Community Resources Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3081 F: (301) 903-6594 E: Email Us More Information »

  18. Self-Shielding Flex-Circuit Drift Tube - Energy Innovation Portal

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    market outlook and drivers for Official Monetary and Financial Institutions Forum (OMFIF) July 14, 2016 | St. Louis, MO by Howard Gruenspecht, Deputy Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day OMFIF l Third Main

  19. Selected U.S. energy issues: a view from the Energy Information Administration

    Energy Information Administration (EIA) (indexed site)

    Oil market outlook and drivers for Official Monetary and Financial Institutions Forum (OMFIF) July 14, 2016 | St. Louis, MO by Howard Gruenspecht, Deputy Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day OMFIF l Third

  20. Energy Markets

    Gasoline and Diesel Fuel Update

    Cyclical and Structural Changes in Oil Markets for Columbia University January 29, 2016 | New York, NY by Adam Sieminski, Administrator U.S. Energy Information Administration Forecast -2 -1 0 1 2 3 4 5 6 7 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day Oil

  1. Energy Markets Outlook

    Gasoline and Diesel Fuel Update

    Markets Outlook For National Association for Business Economics March 7, 2016 | Washington, D.C. By Adam Sieminski, Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day Global oil inventories are forecast to continue

  2. Short-Term Energy Outlook - U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    market outlook and drivers for Official Monetary and Financial Institutions Forum (OMFIF) July 14, 2016 | St. Louis, MO by Howard Gruenspecht, Deputy Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day OMFIF l Third Main

  3. Combined Experiment Phase 1. [Horizontal axis wind turbines: wind tunnel testing versus field testing

    SciTech Connect

    Butterfield, C.P.; Musial, W.P.; Simms, D.A.

    1992-10-01

    How does wind tunnel airfoil data differ from the airfoil performance on an operating horizontal axis wind turbine (HAWT) The National Renewable Energy laboratory has been conducting a comprehensive test program focused on answering this question and understanding the basic fluid mechanics of rotating HAWT stall aerodynamics. The basic approach was to instrument a wind rotor, using an airfoil that was well documented by wind tunnel tests, and measure operating pressure distributions on the rotating blade. Based an the integrated values of the pressure data, airfoil performance coefficients were obtained, and comparisons were made between the rotating data and the wind tunnel data. Care was taken to the aerodynamic and geometric differences between the rotating and the wind tunnel models. This is the first of two reports describing the Combined Experiment Program and its results. This Phase I report covers background information such as test setup and instrumentation. It also includes wind tunnel test results and roughness testing.

  4. Theoretical and experimental power from large horizontal-axis wind turbines

    SciTech Connect

    Viterna, L A; Janetzke, D C

    1982-09-01

    A method for calculating the output power from large horizontal-axis wind turbines is presented. Modifications to the airfoil characteristics and the momentum portion of classical blade element-momentum theory are given that improve correlation with measured data. Improvement is particularly evident at low tip speed ratios where aerodynamic stall can occur as the blade experiences high angles of attack. Output power calculated using the modified theory is compared with measured data for several large wind turbines. These wind turbines range in size from the DOE/NASA 100 kW Mod-O (38 m rotor diameter) to the 2000 kW Mod-1 (61 m rotor diameter). The calculated results are in good agreement with measured data from these machines.

  5. Guy-cable design and damping for vertical-axis wind turbines

    SciTech Connect

    Carne, T.G.

    1981-05-01

    Guy cables are frequently used to support vertical axis wind turbines since guying the turbine reduces some of the structural requirements on the tower. The guys must be designed to provide both the required strength and the required stiffness at the top of the turbine. The axial load which the guys apply to the tower, bearings, and foundations is an undesirable consequence of using guys to support the turbine. Limiting the axial load so that it does not significantly affect the cost of the turbine is an important objective of the cable design. The lateral vibration of the cables is another feature of the cable design which needs to be considered. These aspects of the cable design are discussed in this paper, and a technique for damping cable vibrations is mathematically analyzed and demonstrated with experimental data.

  6. Structural design of the Sandia 34-M Vertical Axis Wind Turbine

    SciTech Connect

    Berg, D.E.

    1985-01-01

    Sandia National Laboratories, as the lead DOE laboratory for Vertical Axis Wind Turbine (VAWT) development, is currently designing a 34-meter diameter Darrieus-type VAWT. This turbine will be a research test bed which provides a focus for advancing technology and validating design and fabrication techniques in a size range suitable for utility use. Structural data from this machine will allow structural modeling to be refined and verified for a turbine on which the gravity effects and stochastic wind loading are significant. Performance data from it will allow aerodynamic modeling to be refined and verified. The design effort incorporates Sandia's state-of-the-art analysis tools in the design of a complete machine. This paper describes the analytic tools we are using, summarizes the conceptual design procedure and presents portions of our detailed design as it exists in September 1984.

  7. VAWTDYN: a numerical package for the dynamic analysis of vertical axis wind turbines

    SciTech Connect

    Lobitz, D.W.; Sullivan, W.N.

    1980-07-01

    In order to design wind turbines which possess long life and at the same time use a minimum quantity of low-cost materials, it is essential that dynamic, in addition to static, structural analyses be performed to eliminate unnecessary margins of safety resulting from undetermined dynamic amplifications. The VAWTDYN package provides a tool for assessing these amplifications in two-bladed vertical axis wind turbines. The dynamic model on which the package is based contains turbine motions most commonly observed in existing research systems. Gyroscopic effects, structural damping, aerodynamic wind loading, and power generation through either an induction or synchronous generator are also included in the model. In addition to a comprehensive description of the model, this report documents the efforts that have gone into the verification, qualification, and demonstration of the package.

  8. Field test report of the Department of Energy's 100-kW vertical axis wind turbine

    SciTech Connect

    Nellums, R.O.

    1985-02-01

    Three second-generation Darrieus-type vertical axis wind turbines of approximately 120-kW capacity per unit were installed in 1980-1981. Through March 1984, over 9000 hours of operation had been accumulated, including 6600 hours of operation on the unit installed in Bushland, Texas. The turbines were heavily instrumented and have yielded a large amount of test data. This report summarizes the test results of this program, including aerodynamic, structural, drive-train, and economic data. Among the most favorable results were an aerodynamic peak performance coefficient of 0.41; fundamental structural integrity requiring few repairs and no major component replacements as of March 1984; and an average prototype fabrication cost of approximately $970 per peak kilowatt of output. The report closes with a review of potential design improvements.

  9. Department of Energy (DOE) research program in structural analysis of vertical-axis wind turbines

    SciTech Connect

    Sullivan, W.N.

    1982-01-01

    The Darrieus-type Vertical Axis Wind Turbine (VAWT) presents a variety of unusual structural problems to designers. The level of understanding of these structural problems governs, to a large degree, the success or failure of today's rotor designs. A survey is presented of the technology available for rotor structural design with emphasis on the DOE research program now underway. Itemizations are included of the major strucural issues unique to the VAWT along with discussion of available analysis techniques for each problem area. It is concluded that tools are available to at least approximately address the most important problems. However, experimental data for confirmation is rather limited in terms of volume and the range of rotor configurations tested.

  10. Vertical axis wind turbine power regulation through centrifugally pumped lift spoiling

    SciTech Connect

    Klimas, P.C.; Sladky, J.F. Jr.

    1985-01-01

    This paper describes an approach for lowering the rated windspeeds of Darrieus-type vertical axis wind turbines (VAWTs) whose blades are hollow aluminum extrusions. The blades, which when rotating act as centrifugal pumps, are fitted with a series of small perforations distributed along a portion of the blades' span. By valving the ends of the hollow blades, flow into the blade ends and out of the perforations may be controlled. This flow can induce premature aerodynamic stall on the blade elements, thereby reducing both the rated power of the turbine and its cost-of-energy. The concept has been proven on the Sandia National Laboratories 5-m diameter research VAWT and force balance and flow visualization wind tunnel tests have been conducted using a blade section designed for the VAWT application.

  11. Strain gauge validation experiments for the Sandia 34-meter VAWT (vertical axis wind turbine) Test Bed

    SciTech Connect

    Sutherland, H.J.

    1988-08-01

    Sandia National Laboratories has erected a research oriented, 34- meter diameter, Darrieus vertical axis wind turbine near Bushland, Texas. This machine, designated the Sandia 34-m VAWT Test Bed, is equipped with a large array of strain gauges that have been placed at critical positions about the blades. This manuscript details a series of four-point bend experiments that were conducted to validate the output of the blade strain gauge circuits. The output of a particular gauge circuit is validated by comparing its output to ''equivalent'' gauge circuits (in this stress state) and to theoretical predictions. With only a few exceptions, the difference between measured and predicted strain values for a gauge circuit was found to be of the order of the estimated repeatability for the measurement system. 8 refs., 20 figs., 3 tabs.

  12. Structural-dynamic-response characteristics of Darrieus vertical-axis wind turbines

    SciTech Connect

    Sullivan, W.N.

    1981-01-01

    Operational experience at Sandia National Laboratories (SNL) with Darrieus-type vertical axis wind turbines (VAWTs) has indicated that a variety of dynamic issues can affect structural performance of the system. The observation and analysis of structural dynamic responses in the VAWT have been divided among three major aspects of the system; namely rotor vibrations, torsional response of the drive train, and transverse vibrations of the cables. This division is not arbitrary, but is rather because the response of these subsystems can be accurately decoupled from each other in most circumstances. This paper will present only a brief summary of the efforts now underway at SNL in the area of structural dynamics. The emphasis will be on discussing the status of our analytical tools, the quantity and quality of existing experimental confirmation data, and the implications structural dynamic issues have on rotor design.

  13. Rotationally-sampled flow-field measurements for vertical-axis wind turbines

    SciTech Connect

    Akins, R.E.

    1983-01-01

    This effects a wind-turbine blade moving through a turbulent flow field have on the feequency content of the relative velocity seen by the blade are an important aspect of the aerodynamically induced loads and may also contribute to the fatigue loads. Recent work has emphasized these effects in large horizontal-axis turbines. Measurements of a rotationally-sampled flow field using the DOE/Sandia 17-m research turbine have been completed. These measurements show increased energy content at integer multiples of rotation rate and indicate why rotational sampling may be an important concept in rotor design. These measurements are the first to have been conducted on an operational turbine in a field environment.

  14. LayTracks3D: A new approach for meshing general solids using medial axis transform

    SciTech Connect

    Quadros, William Roshan

    2015-08-22

    This study presents an extension of the all-quad meshing algorithm called LayTracks to generate high quality hex-dominant meshes of general solids. LayTracks3D uses the mapping between the Medial Axis (MA) and the boundary of the 3D domain to decompose complex 3D domains into simpler domains called Tracks. Tracks in 3D have no branches and are symmetric, non-intersecting, orthogonal to the boundary, and the shortest path from the MA to the boundary. These properties of tracks result in desired meshes with near cube shape elements at the boundary, structured mesh along the boundary normal with any irregular nodes restricted to the MA, and sharp boundary feature preservation. The algorithm has been tested on a few industrial CAD models and hex-dominant meshes are shown in the Results section. Work is underway to extend LayTracks3D to generate all-hex meshes.

  15. Customized airfoils and their impact on VAWT (Vertical-Axis Wind Turbine) cost of energy

    SciTech Connect

    Berg, D.E.

    1990-01-01

    Sandia National Laboratories has developed a family of airfoils specifically designed for use in the equatorial portion of a Vertical-Axis Wind Turbine (VAWT) blade. An airfoil of that family has been incorporated into the rotor blades of the DOE/Sandia 34-m diameter VAWT Test Bed. The airfoil and rotor design process is reviewed. Comparisons with data recently acquired from flow visualization tests and from the DOE/Sandia 34-m diameter VAWT Test Bed illustrate the success that was achieved in the design. The economic optimization model used in the design is described and used to evaluate the effect of modifications to the current Test Bed blade. 1 tab., 11 figs., 13 refs.

  16. Design of a Thermal Imaging Diagnostic Using 90-Degree, Off-Axis, Parabolic Mirrors

    SciTech Connect

    Malone, Robert M.; Becker, Steven A.; Dolan, Daniel H.; Hacking, Richard G.; Hickman, Randy J.; Kaufman, Morris I.; Stevens, Gerald D.; Turley, William D.

    2006-09-01

    Thermal imaging is an important, though challenging, diagnostic for shockwave experiments. Shock-compressed materials undergo transient temperature changes that cannot be recorded with standard (greater than ms response time) infrared detectors. A further complication arises when optical elements near the experiment are destroyed. We have designed a thermal-imaging system for studying shock temperatures produced inside a gas gun at Sandia National Laboratories. Inexpensive, diamond-turned, parabolic mirrors relay an image of the shocked target to the exterior of the gas gun chamber through a sapphire vacuum port. The 3000–5000-nm portion of this image is directed to an infrared camera which acquires a snapshot of the target with a minimum exposure time of 150 ns. A special mask is inserted at the last intermediate image plane, to provide dynamic thermal background recording during the event. Other wavelength bands of this image are split into high-speed detectors operating at 900–1700 nm, and at 1700–3000 nm for timeresolved pyrometry measurements. This system incorporates 90-degree, off-axis parabolic mirrors, which can collect low f/# light over a broad spectral range, for high-speed imaging. Matched mirror pairs must be used so that aberrations cancel. To eliminate image plane tilt, proper tip-to-tip orientation of the parabolic mirrors is required. If one parabolic mirror is rotated 180 degrees about the optical axis connecting the pair of parabolic mirrors, the resulting image is tilted by 60 degrees. Different focal-length mirrors cannot be used to magnify the image without substantially sacrificing image quality. This paper analyzes performance and aberrations of this imaging diagnostic.

  17. Percutaneous fenestration of aortic dissection: Salvage of an ischemic solitary left kidney

    SciTech Connect

    Park, Jae Hyung; Chung, Jin Wook; Cho, Yoon Koo; Kim, Sun Ho; Ahn, Hyuk; Oh, Byung Hee

    1997-03-15

    The false channel of a type III aortic dissection caused acute renal ischemia by compression of the origin of the left renal artery in a patient with status post-right nephrectomy. To relieve the ischemia and restore renal function, percutaneous balloon fenestration was performed successfully.

  18. Toward a defense-dominated world

    SciTech Connect

    Wood, L.

    1993-08-01

    Maintaining the large-scale peace in a defense-dominated world necessarily will require not only passive but also active defenses against large-scale aggression that are technically feasible, practical and easy to employ -- and robust against perversion into support of aggression. Such peace maintenance tool-sets will feature means for effectively rebuking aggression as well as providing timely and very widely available seaming of aggression underway anywhere. This report discusses the technology base which currently exists to provide world-wide, high-quality imagery at moderate (5--10 meter) spatial resolution or imagery of 1% of the Earth`s land surface at high ({le} 1 meter) resolution no less frequently than daily, at a total cost of the order of $1 B, with operational capability in the later `90s. Such systems could provide timely warning of aggressive actions anywhere. Similarly, space-based means of defeating aggression conducted with even quite short-range ballistic missiles anywhere in the world could be brought into existence by the end of the `90s for a total cost of about $10 B, and small high-altitude, long flight-duration robotic aircraft carrying high-performance sensors and interceptor missilery could provide both seaming and active defenses against attacks conducted with very short range ballistic missiles, as well as attacks launched with air-breathing threats such as bombers and cruise missiles, for a cost per defended area of the order of $10/km{sup 2}. It appears that all of the associated sensors can find apt dual-use as high-performance systems for monitoring physical aspects of the human environment.

  19. Toward a nuclear weapons free world?

    SciTech Connect

    Maaranen, S.A.

    1996-09-01

    Doubts about the wisdom of relying on nuclear weapons are as old as nuclear weapons themselves. But despite this questioning, nuclear weapons came to be seen as the indispensable element of American (indeed Western) security during the Cold War. By the 1970s and 1980s, however, discontent was growing about the intense US-Soviet nuclear arms competition, as it failed to provide any enduring improvement in security; rather, it was seen as creating ever greater risks and dangers. Arms control negotiations and limitations, adopted as a means to regulate the technical competition, may also have relieved some of the political pressures and dangers. But the balance of terror, and the fears of it, continued. The Strategic Defense Initiative (SDI) under President Reagan was a very different approach to escaping from the precarious protection of nuclear weapons, in that it sought a way to continue to defend the US and the West, but without the catastrophic risks of mutual deterrence. As such, SDI connoted unhappiness with the precarious nuclear balance and, for many, with nuclear weapons in general. The disappearance of the Warsaw Pact, the disintegration of the Soviet Union, and the sudden end of the Cold War seemed to offer a unique opportunity to fashion a new, more peaceful world order that might allow for fading away of nuclear weapons. Scholars have foreseen two different paths to a nuclear free world. The first is a fundamental improvement in the relationships between states such that nuclear weapons are no longer needed. The second path is through technological development, e.g., missile defenses which could provide effective protection against nuclear attacks. The paper discusses nuclear weapon policy in the US, views of other nuclear states, the future of nuclear weapons, and issues in a less-nuclear world.

  20. Middle East sparking increase in world drilling

    SciTech Connect

    Not Available

    1990-02-01

    Global drilling outside the United States appears to have bottomed out last year if official numbers and estimates supplied to World oil prove accurate. The 1990:0090 forecast calls for a 7.8% boost to 22,316 wells (excluding the USSR, Eastern Europe and North Korea), and every region expects to see a net increase. Figures provided by governmental agencies, operating companies and other sources indicate Middle Eastern drilling last year hit a new high for the 1980's with 948 wells. These figures are also given for Western Europe, the Far East, Africa, South America, Canada, Mexico, Costa Rica, and Guatemala.

  1. Oilfields of the World. Third edition

    SciTech Connect

    Tiratsoo, E.N.

    1985-01-01

    This third edition (updated to 1984) covers all of the world's major producing areas (both onshore and offshore) on six continents. It offers essential geologic, reserves, and production data on 13 nations that have become commercial oil producers in the last five years: Benin, Cameroon, Congo Republic, Ghana, Ivory Coast, Sudan, Zaire, Greece, The Phillippines, Sharjah, Thailand, Guatemala, and Surinam. Numerous maps display the geologic details of each area. This book also contains full-color maps of the oil and gas fields of the North Sea, Persian Gulf, Mexico, Venezuela, and Brazil.

  2. Anthropometry for WorldSID, a World-Harmonized Midsize Male Side Impact Crash Dummy

    SciTech Connect

    S. Moss; Z. Wang; M. Salloum; M. Reed; M. Van Ratingen; D. Cesari; R. Scherer; T. Uchimura; M. Beusenberg

    2000-06-19

    The WorldSID project is a global effort to design a new generation side impact crash test dummy under the direction of the International Organization for Standardization (ISO). The first WorldSID crash dummy will represent a world-harmonized mid-size adult male. This paper discusses the research and rationale undertaken to define the anthropometry of a world standard midsize male in the typical automotive seated posture. Various anthropometry databases are compared region by region and in terms of the key dimensions needed for crash dummy design. The Anthropometry for Motor Vehicle Occupants (AMVO) dataset, as established by the University of Michigan Transportation Research Institute (UMTRI), is selected as the basis for the WorldSID mid-size male, updated to include revisions to the pelvis bone location. The proposed mass of the dummy is 77.3kg with full arms. The rationale for the selected mass is discussed. The joint location and surface landmark database is appended to this paper.

  3. World energy: Building a sustainable future

    SciTech Connect

    Schipper, L.; Meyers, S.

    1992-04-01

    As the 20th century draws to a close, both individual countries and the world community face challenging problems related to the supply and use energy. These include local and regional environmental impacts, the prospect of global climate and sea level change associated with the greenhouse effect, and threats to international relations in connection with oil supply or nuclear proliferation. For developing countries, the financial cost of providing energy to provide basic needs and fuel economic development pose an additional burden. To assess the magnitude of future problems and the potential effectiveness of response strategies, it is important to understand how and why energy use has changed in the post and where it is heading. This requires study of the activities for which energy is used, and of how people and technology interact to provide the energy services that are desired. The authors and their colleagues have analyzed trends in energy use by sector for most of the world's major energy-consuming countries. The approach we use considers three key elements in each sector: the level of activity, structural change, and energy intensity, which expresses the amount of energy used for various activities. At a disaggregated level, energy intensity is indicative of energy efficiency. But other factors besides technical efficiency also shape intensity.

  4. World trends: Improving fortunes restore upstream health

    SciTech Connect

    1996-08-01

    After a decade of recovery from the oil price collapse of 1986, the global upstream industry appears headed for a period of renewed strength and growth. Underpinning the prosperity is steady unrelenting growth in crude demand. Stronger global crude demand and heavy natural gas usage in the US are driving higher prices. Operators are reacting to better prices with larger drilling programs. Also boosting drilling levels are crude production expansion projects that many countries have underway in response to perceived future demand. Not surprisingly, World Oil`s outlook calls for global drilling to rise 4.5% to 60,273 wells, a second straight annual increase. Better US activity is helping, but so are stronger-than-expected numbers in Canada. Meanwhile, World Oil`s 51st annual survey of governments and operators indicates that global oil production rose 1.4% last year, to 62,774 million bpd. That was not enough, however, to keep up with demand. The paper discusses financial performance, business practices, other factors, and operating outlook. A table lists the 1996 forecasts, estimated wells drilled in 1995, and total wells and footage drilled in 1994 by country. A second table lists global crude and condensate production and wells actually producing in 1995 versus 1994.

  5. World crude output overcomes Persian Gulf disruption

    SciTech Connect

    Not Available

    1992-02-01

    Several OPEC producers made good on their promises to replace 2.7 MMbpd of oil exports that vanished from the world market after Iraq took over Kuwait. Even more incredibly, they accomplished this while a breathtaking 1.2- MMbopd reduction in Soviet output took place during the course of 1991. After Abu Dhabi, Indonesia, Iran, Libya, Nigeria, Saudi Arabia and Venezuela turned the taps wide open, their combined output rose 2.95 MMbopd. Put together with a 282,000-bopd increase by Norway and contributions from smaller producers, this enabled world oil production to remain within 400,000 bopd of its 1990 level. The 60.5-MMbopd average was off by just 0.7%. This paper reports that improvement took place in five of eight regions. Largest increases were in Western Europe and Africa. Greatest reductions occurred in Eastern Europe and the Middle East. Fifteen nations produced 1 MMbopd or more last year, compared with 17 during 1990.

  6. Energy Secretary Moniz, EPA Administrator McCarthy and World...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Moniz, EPA Administrator McCarthy and World Bank President Kim to Keynote ARPA-E Energy Innovation Summit Energy Secretary Moniz, EPA Administrator McCarthy and World Bank ...

  7. World's largest single crystal of gold verified at Los Alamos

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World's largest single crystal of gold verified at Los Alamos World's largest single crystal of gold verified at Los Alamos The SCD instrument is used to determine the periodic ...

  8. World Energy Projection System Plus Model Documentation: Industrial Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Industrial Model (WIM). It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  9. World Energy Use: ISO Standards that Can Help | Department of...

    Office of Environmental Management (EM)

    World Energy Use: ISO Standards that Can Help This one-page flyer shows total world energy consumption of marketed energy by economic sector as well as a list of ISO standards that ...

  10. FutureWorld Energy Inc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search Name: FutureWorld Energy Inc Place: Florida Zip: 33701 Product: Florida-based marine energy project developer. References: FutureWorld Energy Inc1 This article is a...

  11. New World Record Achieved in Solar Cell Technology | Department...

    Office of Environmental Management (EM)

    World Record Achieved in Solar Cell Technology New World Record Achieved in Solar Cell Technology December 5, 2006 - 9:34am Addthis New Solar Cell Breaks the "40 Percent Efficient" ...

  12. NewWorld Capital Group LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    NewWorld Capital Group LLC Jump to: navigation, search Name: NewWorld Capital Group LLC Place: New York, New York Zip: 10022 Sector: Efficiency Product: New York-based private...

  13. Better World Club Travel Cool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Club Travel Cool Jump to: navigation, search Name: Better World Club Travel Cool Place: Portland, Oregon Zip: 97209 Product: Travel Cool is the eNewsletter of the Better...

  14. Top of the World (GE) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    GE) Jump to: navigation, search Name Top of the World (GE) Facility Top of the World (GE) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner...

  15. World Institute for Nuclear Security Workshop at Y-12 Brings...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World Institute for Nuclear ... World Institute for Nuclear Security Workshop at Y-12 Brings Together More than 20 Countries Posted: June 28, 2012 - 4:30pm This week, more than 20 ...

  16. Renewable, Green LNG: Update on the World's Largest Landill Gass...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Renewable, Green LNG: Update on the World's Largest Landill Gass to LNG Plant Renewable, Green LNG: Update on the World's Largest Landill Gass to LNG Plant Presentation at the ...

  17. World Institute for Nuclear Security Workshop at Y-12 Brings...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World Institute for Nuclear Security Workshop at Y-12 Brings Together More than 20 ... at the Y-12 National Security Complex for the World Institute for Nuclear Security (WINS). ...

  18. Join Energy Leaders at Next Week's World Energy Engineering Congress |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Join Energy Leaders at Next Week's World Energy Engineering Congress Join Energy Leaders at Next Week's World Energy Engineering Congress September 15, 2016 - 11:38am Addthis Register Today for AMO Co-Sponsored World Energy Engineering Congress The 39th World Energy Engineering Congress (WEEC) will be held September 21-23, 2016 at the Walter E. Washington Convention Center in Washington, DC. Register today to attend the largest energy conference and technology expo held

  19. World-Class Test Facility Increases Efficiency of Solar Products |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy World-Class Test Facility Increases Efficiency of Solar Products World-Class Test Facility Increases Efficiency of Solar Products World-Class Test Facility Increases Efficiency of Solar Products This photograph features PV arrays at the SunEdison Facility at the Solar Technology Acceleration Center (SolarTAC) in Aurora, Colorado. SolarTAC is an integrated, world-class test facility where the solar industry will test, validate, and demonstrate near-market and advanced

  20. National Laboratories Shine at World's Largest Hydropower Event |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy National Laboratories Shine at World's Largest Hydropower Event National Laboratories Shine at World's Largest Hydropower Event July 28, 2015 - 2:09pm Addthis National Laboratories Shine at World’s Largest Hydropower Event Members of the Energy Department's national laboratories-Oak Ridge National Laboratory, Argonne National Laboratory, and National Renewable Energy Laboratory-took home "Technical Paper of the Year" awards at the world's largest

  1. World's Largest Concentrating Solar Power Plant Opens in California |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy World's Largest Concentrating Solar Power Plant Opens in California World's Largest Concentrating Solar Power Plant Opens in California February 19, 2014 - 12:00am Addthis Ivanpah, the world's largest concentrating solar plant, opened in California on February 13.Credit: BrightSource Energy The Ivanpah Solar Electric Generating System, the world's largest concentrating solar power (CSP) plant, officially opened on February 13. As the first commercial deployment of

  2. Trinity Site - World's First Nuclear Explosion | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Trinity Site - World's First Nuclear Explosion Trinity Site - World's First Nuclear Explosion Trinity Site - World's First Nuclear Explosion The world's first nuclear explosion occurred on July 16, 1945, when a plutonium implosion device was tested at a site located 210 miles south of Los Alamos on the barren plains of the Alamogordo Bombing Range, known as the Jornada del Muerto. Inspired by the poetry of John Donne, J. Robert Oppenheimer code-named the test Trinity. Hoisted atop a 150-foot

  3. Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell

    Energy.gov [DOE]

    EERE supported the development of Solar Junction's concentrated photovoltaic technology that set a world record for conversion efficiency.

  4. World's Largest Laser Sets New Records | Department of Energy

    Energy Saver

    Department of Energy World's Largest Concentrating Solar Power Plant Opens in California World's Largest Concentrating Solar Power Plant Opens in California February 19, 2014 - 12:00am Addthis Ivanpah, the world's largest concentrating solar plant, opened in California on February 13.Credit: BrightSource Energy The Ivanpah Solar Electric Generating System, the world's largest concentrating solar power (CSP) plant, officially opened on February 13. As the first commercial deployment of

  5. Jefferson Lab Celebrates 2005: World Year of Physics | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Celebrates 2005: World Year of Physics World Year of Physics Jefferson Lab Celebrates 2005: World Year of Physics January 24, 2005 Newport News, Va. - This year marks the 100th anniversary of Albert Einstein's "miraculous year," in which he wrote five papers that changed the way we look at physics. The International Union of Pure and Applied Physics (IUPAP) and the United Nations Educational, Scientific and Cultural Organization (UNESCO) have declared 2005 the World Year of Physics,

  6. United States Regains Lead with World's Fastest Supercomputer |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Regains Lead with World's Fastest Supercomputer United States Regains Lead with World's Fastest Supercomputer June 18, 2012 - 2:02pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - Energy Secretary Steven Chu today announced that a supercomputer called Sequoia at Lawrence Livermore National Laboratory (LLNL) in Livermore, California, received the rank of the world's most powerful computing system. The Top500 list, which annually ranks the world's fastest

  7. World Bank Good Practice Guidelines: Financial Analysis of Revenue...

    OpenEI (Open Energy Information) [EERE & EIA]

    AgencyCompany Organization: World Bank Topics: Finance Resource Type: Guidemanual Website: siteresources.worldbank.orgINTRANETFINANCIALMGMTResourcesFMB-Notes...

  8. Design, performance and economics of the DAF Indal 50 kw and 375 kw vertical axis wind turbine

    SciTech Connect

    Schienbein, L.A.; Malcolm, D.J.

    1982-03-01

    A review of the development and performance of the DAF Indal 50 kW vertical axis Darrieus wind turbines shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. 5 refs.

  9. Precision tool holder with flexure-adjustable, three degrees of freedom for a four-axis lathe

    DOEpatents

    Bono, Matthew J.; Hibbard, Robin L.

    2008-03-04

    A precision tool holder for precisely positioning a single point cutting tool on 4-axis lathe, such that the center of the radius of the tool nose is aligned with the B-axis of the machine tool, so as to facilitate the machining of precision meso-scale components with complex three-dimensional shapes with sub-.mu.m accuracy on a four-axis lathe. The device is designed to fit on a commercial diamond turning machine and can adjust the cutting tool position in three orthogonal directions with sub-micrometer resolution. In particular, the tool holder adjusts the tool position using three flexure-based mechanisms, with two flexure mechanisms adjusting the lateral position of the tool to align the tool with the B-axis, and a third flexure mechanism adjusting the height of the tool. Preferably, the flexures are driven by manual micrometer adjusters. In this manner, this tool holder simplifies the process of setting a tool with sub-.mu.m accuracy, to substantially reduce the time required to set the tool.

  10. NASTRAN-based computer program for structural dynamic analysis of horizontal axis wind turbines

    SciTech Connect

    Lobitz, D.W.

    1984-01-01

    This paper describes a computer program developed for structural dynamic analysis of horizontal axis wind turbines (HAWTs). It is based on the finite element method through its reliance on NASTRAN for the development of mass, stiffness, and damping matrices of the tower and rotor, which are treated in NASTRAN as separate structures. The tower is modeled in a stationary frame and the rotor in one rotating at a constant angular velocity. The two structures are subsequently joined together (external to NASTRAN) using a time-dependent transformation consistent with the hub configuration. Aerodynamic loads are computed with an established flow model based on strip theory. Aeroelastic effects are included by incorporating the local velocity and twisting deformation of the blade in the load computation. The turbulent nature of the wind, both in space and time, is modeled by adding in stochastic wind increments. The resulting equations of motion are solved in the time domain using the implicit Newmark-Beta integrator. Preliminary comparisons with data from the Boeing/NASA MOD2 HAWT indicate that the code is capable of accurately and efficiently predicting the response of HAWTs driven by turbulent winds.

  11. Dual axis radiographic hydrodynamic test facility. Final environmental impact statement, Volume 2: Public comments and responses

    SciTech Connect

    1995-08-01

    On May 12, 1995, the U.S. Department of Energy (DOE) issued the draft Dual Axis Radiographic Hydrodynamic Test Facility Environmental Impact Statement (DARHT EIS) for review by the State of New Mexico, Indian Tribes, local governments, other Federal agencies, and the general public. DOE invited comments on the accuracy and adequacy of the draft EIS and any other matters pertaining to their environmental reviews. The formal comment period ran for 45 days, to June 26, 1995, although DOE indicated that late comments would be considered to the extent possible. As part of the public comment process, DOE held two public hearings in Los Alamos and Santa Fe, New Mexico, on May 31 and June 1, 1995. In addition, DOE made the draft classified supplement to the DARHT EIS available for review by appropriately cleared individuals with a need to know the classified information. Reviewers of the classified material included the State of New Mexico, the U.S. Environmental Protection Agency, the Department of Defense, and certain Indian Tribes. Volume 2 of the final DARHT EIS contains three chapters. Chapter 1 includes a collective summary of the comments received and DOE`s response. Chapter 2 contains the full text of the public comments on the draft DARHT EIS received by DOE. Chapter 3 contains DOE`s responses to the public comments and an indication as to how the comments were considered in the final EIS.

  12. Improved double-multiple streamtube model for the Darrieus-type vertical-axis wind turbine

    SciTech Connect

    Berg, D.E.

    1983-01-01

    Double streamtube codes model the curved blade (Darrieus-type) vertical-axis wind turbine (VAWT) as a double actuator-disk arrangement (one disk for the upwind half of the rotor and a second disk for the downwind half) and use conservation of momentum principles to determine the forces acting on the turbine blades and the turbine performance. These models differentiate between the upwind and downwind sections of the rotor and are capable of determining blade loading more accurately than the widely-used single-actuator-disk streamtube models. Additional accuracy may be obtained by representing the turbine as a collection of several streamtubes, each of which is modeled as a double actuator disk. This is referred to as the double-multiple-streamtube model. Sandia National Laboratories has developed a double-multiple streamtube model for the VAWT which incorporates the effects of the incident wind boundary layer, nonuniform velocity between the upwind and downwind sections of the rotor, dynamic stall effects and local blade Reynolds number variations. This paper presents the theory underlying this VAWT model and describes the code capabilities. Code results are compared with experimental data from two VAWT's and with the results from another double-multiple-streamtube and a vortex-filament code. The effects of neglecting dynamic stall and horizontal wind-velocity distribution are also illustrated.

  13. LayTracks3D: A new approach for meshing general solids using medial axis transform

    DOE PAGES [OSTI]

    Quadros, William Roshan

    2015-08-22

    This study presents an extension of the all-quad meshing algorithm called LayTracks to generate high quality hex-dominant meshes of general solids. LayTracks3D uses the mapping between the Medial Axis (MA) and the boundary of the 3D domain to decompose complex 3D domains into simpler domains called Tracks. Tracks in 3D have no branches and are symmetric, non-intersecting, orthogonal to the boundary, and the shortest path from the MA to the boundary. These properties of tracks result in desired meshes with near cube shape elements at the boundary, structured mesh along the boundary normal with any irregular nodes restricted to themore » MA, and sharp boundary feature preservation. The algorithm has been tested on a few industrial CAD models and hex-dominant meshes are shown in the Results section. Work is underway to extend LayTracks3D to generate all-hex meshes.« less

  14. Development of passive-controlled HUB (teetered brake & damper mechanism) of horizontal axis wind turbine

    SciTech Connect

    Shimizu, Yukimaru; Kamada, Yasunari; Maeda, Takao

    1997-12-31

    For the purpose of the improvement of reliability of the Mega-Watt wind turbine, this paper indicates the development of an original mechanism for the passive-controlled hub, which has the effects of braking and damping on aerodynamic forces. This mechanism is useful for variable speed control of the large wind turbine. The passive-controlled hub is the combination of two mechanisms. One is the passive-teetered and damping mechanism, and the other is the passive-variable-pitch mechanism. These mechanism are carried out by the combination of the teetering and feathering motions. When the wind speed exceeds the rated wind speed, the blade is passively teetered in a downwind direction and, simultaneously, a feathering mechanism, which is linked to the teetering mechanism through a connecting rods, is activated. Testing of the model horizontal axis wind turbine in a wind tunnel showed that the passive-controlled hub mechanism can suppress the over-rotational speed of the rotor. By the application of the passive-controlled hub mechanism, the maximum rotor speed is reduced to about 60%.

  15. A 3-D aerodynamic method for the analysis of isolated horizontal-axis wind turbines

    SciTech Connect

    Ammara, I.; Masson, C.; Paraschivoiu, I.

    1997-12-31

    In most existing performance-analysis methods, wind turbines are considered isolated so that interference effects caused by other rotors or by the site topography are neglected. The main objective of this paper is to propose a practical 3-D method suitable for the study of these effects, in order to optimize the arrangement and the positioning of Horizontal-Axis Wind Turbines (HAWTs) in a wind farm. In the proposed methodology, the flow field around isolated HAWTs is predicted by solving the 3-D, time-averaged, steady-state, incompressible, Navier-Stokes equations in which the turbines are represented by distributions of momentum sources. The resulting governing equations are solved using a Control-Volume Finite Element Method (CVFEM). The fundamental aspects related to the development of a practical 3-D method are discussed in this paper, with an emphasis on some of the challenges that arose during its implementation. The current implementation is limited to the analysis of isolated HAWTs. Preliminary results have indicated that, the proposed 3-D method reaches the same level of accuracy, in terms of performance predictions, that the previously developed 2-D axisymmetric model and the well-known momentum-strip theory, while still using reasonable computers resources. It can be considered as a useful tool for the design of HAWTs. Its main advantages, however, are its intrinsic capacity to predict the details of the flow in the wake, and its capabilities of modelling arbitrary wind-turbine arrangements and including ground effects.

  16. Four Pulse Drive System for the Beam Induction Cells for DARHT Axis 2

    SciTech Connect

    Downing, J.; Carlson, R.; Melton, J.; Fockler, J.

    1999-06-28

    The proposed drive system allows for the generation of up to four (4) high-quality radiographic pulses along one line-of-sight, having arbitrary pulse spacing ({approximately}500 ns), using demonstrated technologies. This concept uses a four-pulse drive system to drive both a 16-MeV ensemble of 250-kV, 4-kA induction cells and a four-pulse, 4-MeV injector. The key to this approach lies in the method used to combine four pulses from different generators in a manner that does not compromise the voltage flatness requirement of {+-} 1%. The induction cells use core material for only a single pulse. A simple reverse bias circuit is used to reset the cores between pulses, and the insulator has been redesigned to withstand the reverse reset voltage. This approach can be installed in stages so that the facility can be used for dual axis radiography while implementing the multi-pulsing capability. A dual double-pulse format has been identified which provides a sequence of two pulses along one line-of-sight within a 2-{micro}sec window. The 2-{micro}sec windows can be separated by arbitrary time intervals of 2- to 10-{micro}sec.

  17. Lighting the World in a Different Way

    SciTech Connect

    Wilber, Nicole; Houmpheng, Krista; Coltrin, Mike

    2013-07-18

    Representing the Solid State Lighting Science (SSLS), this document is one of the entries in the Ten Hundred and One Word Challenge. As part of the challenge, the 46 Energy Frontier Research Centers were invited to represent their science in images, cartoons, photos, words and original paintings, but any descriptions or words could only use the 1000 most commonly used words in the English language, with the addition of one word important to each of the EFRCs and the mission of DOE: energy. The mission of the SSLS is to help build the scientific foundation that enables solid-state lighting to produce the most light for the least energy, both in the U.S. and, as a side-benefit, throughout the world.

  18. Exploration opportunities pop up around the world

    SciTech Connect

    Petzet, G.A.

    1993-04-26

    The traditional exploration cycle is in progress around the world, and many more exploration opportunities are becoming available than are being foreclosed. Yemen, for instance, is one of the few countries in the Middle East open to exploration by outside operators. Reserves were estimated at 4 billion bbl of oil on January 1, 1993, and the potential is widely believed to be much greater. Australia is opening 2 million acres offshore in the Vulcan sub-basin this month along with small parcels in the Bonaparte Gulf and more southerly basins. Several tracts have become available off Newfoundland, including two in proximity to giant Hibernia oil field scheduled for development this decade. Recent announcement of the first oil company licensing round in the Falkland Islands offshore has stimulated interest in that area. The paper discusses exploration potential in these four areas.

  19. MicrobeWorld Radio and Communications Initiative

    SciTech Connect

    Barbara Hyde

    2006-11-22

    MicrobeWorld is a 90-second feature broadcast daily on more than 90 public radio stations and available from several sources as a podcast, including www.microbeworld.org. The feature has a strong focus on the use and adapatbility of microbes as alternative sources of energy, in bioremediation, their role in climate, and especially the many benefits and scientific advances that have resulting from decoding microbial genomes. These audio features are permanantly archived on an educational outreach site, microbeworld.org, where they are linked to the National Science Education Standards. They are also being used by instructors at all levels to introduce students to the multiple roles and potential of microbes, including a pilot curriculum program for middle-school students in New York.

  20. Real-World Hydrogen Technology Validation: Preprint

    SciTech Connect

    Sprik, S.; Kurtz, J.; Wipke, K.; Ramsden, T.; Ainscough, C.; Eudy, L.; Saur, G.

    2012-03-01

    The Department of Energy, the Department of Defense's Defense Logistics Agency, and the Department of Transportation's Federal Transit Administration have funded learning demonstrations and early market deployments to provide insight into applications of hydrogen technologies on the road, in the warehouse, and as stationary power. NREL's analyses validate the technology in real-world applications, reveal the status of the technology, and facilitate the development of hydrogen and fuel cell technologies, manufacturing, and operations. This paper presents the maintenance, safety, and operation data of fuel cells in multiple applications with the reported incidents, near misses, and frequencies. NREL has analyzed records of more than 225,000 kilograms of hydrogen that have been dispensed through more than 108,000 hydrogen fills with an excellent safety record.

  1. Left-right spin asymmetry in ℓN↑→hX

    DOE PAGES [OSTI]

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-09

    In this study, we consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We alsomore » give predictions for future experiments and highlight in particular the unique opportunities at an Electron Ion Collider.« less

  2. Left-right spin asymmetry in ? N? ? h ?

    SciTech Connect

    Gamberg, Leonard; Kang, Zhong -Bo; Metz, Andreas; Pitonyak, Daniel; Prokudin, Alexei

    2014-10-01

    We consider the inclusive production of hadrons in lepton-nucleon scattering. For a transversely polarized nucleon this reaction shows a left-right azimuthal asymmetry, which we compute in twist-3 collinear factorization at leading order in perturbation theory. All non-perturbative parton correlators of the calculation are fixed through information from other hard processes. Our results for the left-right asymmetry agree in sign with recent data for charged pion production from the HERMES Collaboration and from Jefferson Lab. However, the magnitude of the computed asymmetries tends to be larger than the data. Potential reasons for this outcome are identified. We also give predictions for future experiments and highlight in particular the unique opportunities at an Electron Ion Collider.

  3. Improvements in dose calculation accuracy for small off-axis targets in high dose per fraction tomotherapy

    SciTech Connect

    Hardcastle, Nicholas; Bayliss, Adam; Wong, Jeannie Hsiu Ding; Rosenfeld, Anatoly B.; Tome, Wolfgang A.

    2012-08-15

    Purpose: A recent field safety notice from TomoTherapy detailed the underdosing of small, off-axis targets when receiving high doses per fraction. This is due to angular undersampling in the dose calculation gantry angles. This study evaluates a correction method to reduce the underdosing, to be implemented in the current version (v4.1) of the TomoTherapy treatment planning software. Methods: The correction method, termed 'Super Sampling' involved the tripling of the number of gantry angles from which the dose is calculated during optimization and dose calculation. Radiochromic film was used to measure the dose to small targets at various off-axis distances receiving a minimum of 21 Gy in one fraction. Measurements were also performed for single small targets at the center of the Lucy phantom, using radiochromic film and the dose magnifying glass (DMG). Results: Without super sampling, the peak dose deficit increased from 0% to 18% for a 10 mm target and 0% to 30% for a 5 mm target as off-axis target distances increased from 0 to 16.5 cm. When super sampling was turned on, the dose deficit trend was removed and all peak doses were within 5% of the planned dose. For measurements in the Lucy phantom at 9.7 cm off-axis, the positional and dose magnitude accuracy using super sampling was verified using radiochromic film and the DMG. Conclusions: A correction method implemented in the TomoTherapy treatment planning system which triples the angular sampling of the gantry angles used during optimization and dose calculation removes the underdosing for targets as small as 5 mm diameter, up to 16.5 cm off-axis receiving up to 21 Gy.

  4. Left-Right Symmetry: From the LHC to Neutrinoless Double Beta Decay

    SciTech Connect

    Tello, Vladimir [SISSA, Trieste (Italy); Nemevsek, Miha [ICTP, Trieste (Italy); Jozef Stefan Institute, Ljubljana (Slovenia); Nesti, Fabrizio [Universita di Ferrara, Ferrara (Italy); Senjanovic, Goran [ICTP, Trieste (Italy); Vissani, Francesco [LNGS, INFN, Assergi (Italy)

    2011-04-15

    The Large Hadron Collider has the potential to probe the scale of left-right symmetry restoration and the associated lepton number violation. Moreover, it offers the hope of measuring the right-handed leptonic mixing matrix. We show how this, together with constraints from lepton flavor violating processes, can be used to make predictions for neutrinoless double beta decay. We illustrate this connection in the case of the type-II seesaw.

  5. Rare top quark decays in Alternative Left-Right Symmetric Models

    SciTech Connect

    Gaitan, R.; Miranda, O. G.; Cabral-Rosetti, L. G.

    2007-06-19

    We evaluate the flavor changing neutral currents (FCNC) decay t {yields} H0 + c in the context of Alternative Left-Right symmetric Models (ALRM) with extra isosinglet heavy fermions; the FCNC decays may place at tree level and are only supressed by the mixing between ordinary top and charm quarks. We also comment on the decay process t {yields} c + {gamma}, which involves radiative corrections.

  6. Hewlett and Anderson - New World | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Anderson - New World Hewlett and Anderson - New World Richard G. Hewlett and Oscar E. Anderson, Jr. The New World, 1939-1946. Volume I: A History of the Atomic Energy Commission. 1962. Text in each PDF is fully searchable. HewlettandAndersonNewWorldNoBookmarks.pdf (9.71 MB) HewlettandAndersonNewWorldPicturesOnly.pdf (16.93 MB) More Documents & Publications The Manhattan Project: Making the Atomic Bomb The Manhattan Project: Making of the Atomic Bomb Gosling, The Manhattan Project: Making the

  7. Search for W'->tb resonances with left- and right-handed couplings to fermions

    SciTech Connect

    Abazov, Victor Mukhamedovich; Abbott, Braden Keim; Acharya, Bannanje Sripath; Adams, Mark Raymond; Adams, Todd; Alexeev, Guennadi D.; Alkhazov, Georgiy D.; Alton, Andrew K.; Alverson, George O.; Alves, Gilvan Augusto; Ancu, Lucian Stefan; /Nijmegen U. /Fermilab

    2011-01-01

    We present a search for the production of a heavy gauge boson, W{prime}, that decays to third-generation quarks, by the D0 Collaboration in p{bar p} collisions at {radical}s = 1.96 TeV. We set 95% confidence level upper limits on the production cross section times branching fraction. For the first time, we set limits for arbitrary combinations of left- and right-handed couplings of the W{prime} boson to fermions. For couplings with the same strength as the standard model W boson, we set the following limits for M(W{prime}) > m({nu}{sub R}): M(W{prime}) > 863 GeV for purely left-handed couplings, M(W{prime}) > 885 GeV for purely right-handed couplings, and M(W{prime}) > 916 GeV if both left- and right-handed couplings are present. The limit for right-handed couplings improves for M(W{prime}) < m({nu}{sub R}) to M(W{prime}) > 890 GeV.

  8. Profile of World Uranium Enrichment Programs-2009

    SciTech Connect

    Laughter, Mark D

    2009-04-01

    It is generally agreed that the most difficult step in building a nuclear weapon is acquiring fissile material, either plutonium or highly enriched uranium (HEU). Plutonium is produced in a nuclear reactor, whereas HEU is produced using a uranium enrichment process. Enrichment is also an important step in the civil nuclear fuel cycle, in producing low enriched uranium (LEU) for use as fuel for nuclear reactors to generate electricity. However, the same equipment used to produce LEU for nuclear reactor fuel can also be used to produce HEU for weapons. Safeguards at an enrichment plant are the array of assurances and verification techniques that ensure uranium is not diverted or enriched to HEU. There are several techniques for enriching uranium. The two most prevalent are gaseous diffusion, which uses older technology and requires a lot of energy, and gas centrifuge separation, which uses more advanced technology and is more energy efficient. Gaseous diffusion plants (GDPs) provide about 40% of current world enrichment capacity but are being phased out as newer gas centrifuge enrichment plants (GCEPs) are constructed. Estimates of current and future enrichment capacity are always approximate, due to the constant upgrades, expansions, and shutdowns occurring at enrichment plants, largely determined by economic interests. Currently, the world enrichment capacity is approximately 56 million kilogram separative work units (SWU) per year, with 22.5 million in gaseous diffusion and more than 33 million in gas centrifuge plants. Another 34 million SWU/year of capacity is under construction or planned for the near future, almost entirely using gas centrifuge separation. Other less-efficient techniques have also been used in the past, including electromagnetic and aerodynamic separations, but these are considered obsolete, at least from a commercial perspective. Laser isotope separation shows promise as a possible enrichment technique of the future but has yet to be

  9. Profile of World Uranium Enrichment Programs - 2007

    SciTech Connect

    Laughter, Mark D

    2007-11-01

    It is generally agreed that the most difficult step in building a nuclear weapon is acquiring weapons grade fissile material, either plutonium or highly enriched uranium (HEU). Plutonium is produced in a nuclear reactor, while HEU is produced using a uranium enrichment process. Enrichment is also an important step in the civil nuclear fuel cycle, in producing low enriched uranium (LEU) for use in fuel for nuclear reactors. However, the same equipment used to produce LEU for nuclear fuel can also be used to produce HEU for weapons. Safeguards at an enrichment plant are the array of assurances and verification techniques that ensure uranium is only enriched to LEU, no undeclared LEU is produced, and no uranium is enriched to HEU or secretly diverted. There are several techniques for enriching uranium. The two most prevalent are gaseous diffusion, which uses older technology and requires a lot of energy, and gas centrifuge separation, which uses more advanced technology and is more energy efficient. Gaseous diffusion plants (GDPs) provide about 40% of current world enrichment capacity, but are being phased out as newer gas centrifuge enrichment plants (GCEPs) are constructed. Estimates of current and future enrichment capacity are always approximate, due to the constant upgrades, expansions, and shutdowns occurring at enrichment plants, largely determined by economic interests. Currently, the world enrichment capacity is approximately 53 million kg-separative work units (SWU) per year, with 22 million in gaseous diffusion and 31 million in gas centrifuge plants. Another 23 million SWU/year of capacity are under construction or planned for the near future, almost entirely using gas centrifuge separation. Other less-efficient techniques have also been used in the past, including electromagnetic and aerodynamic separations, but these are considered obsolete, at least from a commercial perspective. Laser isotope separation shows promise as a possible enrichment technique

  10. Structural Design of a Horizontal-Axis Tidal Current Turbine Composite Blade

    SciTech Connect

    Bir, G. S.; Lawson, M. J.; Li, Y.

    2011-10-01

    This paper describes the structural design of a tidal composite blade. The structural design is preceded by two steps: hydrodynamic design and determination of extreme loads. The hydrodynamic design provides the chord and twist distributions along the blade length that result in optimal performance of the tidal turbine over its lifetime. The extreme loads, i.e. the extreme flap and edgewise loads that the blade would likely encounter over its lifetime, are associated with extreme tidal flow conditions and are obtained using a computational fluid dynamics (CFD) software. Given the blade external shape and the extreme loads, we use a laminate-theory-based structural design to determine the optimal layout of composite laminas such that the ultimate-strength and buckling-resistance criteria are satisfied at all points in the blade. The structural design approach allows for arbitrary specification of the chord, twist, and airfoil geometry along the blade and an arbitrary number of shear webs. In addition, certain fabrication criteria are imposed, for example, each composite laminate must be an integral multiple of its constituent ply thickness. In the present effort, the structural design uses only static extreme loads; dynamic-loads-based fatigue design will be addressed in the future. Following the blade design, we compute the distributed structural properties, i.e. flap stiffness, edgewise stiffness, torsion stiffness, mass, moments of inertia, elastic-axis offset, and center-of-mass offset along the blade. Such properties are required by hydro-elastic codes to model the tidal current turbine and to perform modal, stability, loads, and response analyses.

  11. IONIZATION SOURCE OF A MINOR-AXIS CLOUD IN THE OUTER HALO OF M82

    SciTech Connect

    Matsubayashi, K.; Taniguchi, Y.; Kajisawa, M.; Shioya, Y.; Sugai, H.; Shimono, A.; Hattori, T.; Ozaki, S.; Yoshikawa, T.; Nagao, T.; Bland-Hawthorn, J.

    2012-12-10

    The M82 ''cap'' is a gas cloud at a projected radius of 11.6 kpc along the minor axis of this well-known superwind source. The cap has been detected in optical line emission and X-ray emission and therefore provides an important probe of the wind energetics. In order to investigate the ionization source of the cap, we observed it with the Kyoto3DII Fabry-Perot instrument mounted on the Subaru Telescope. Deep continuum, H{alpha}, [N II]{lambda}6583/H{alpha}, and [S II]{lambda}{lambda}6716,6731/H{alpha} maps were obtained with subarcsecond resolution. The superior spatial resolution compared to earlier studies reveals a number of bright H{alpha} emitting clouds within the cap. The emission line widths ({approx}< 100 km s{sup -1} FWHM) and line ratios in the newly identified knots are most reasonably explained by slow to moderate shocks velocities (v{sub shock} 40-80 km s{sup -1}) driven by a fast wind into dense clouds. The momentum input from the M82 nuclear starburst region is enough to produce the observed shock. Consequently, earlier claims of photoionization by the central starburst are ruled out because they cannot explain the observed fluxes of the densest knots unless the UV escape fraction is very high (f{sub esc} > 60%), i.e., an order of magnitude higher than observed in dwarf galaxies to date. Using these results, we discuss the evolutionary history of the M82 superwind. Future UV/X-ray surveys are expected to confirm that the temperature of the gas is consistent with our moderate shock model.

  12. World enrichment services market 1990-2005

    SciTech Connect

    1990-08-01

    Growth in world enrichment capacity, already in oversupply, will lead to a very competitive enrichment services market by the second half of the 1990s. Three of the four primary enrichment suppliers (USDOE, Eurodif, and Urenco) already have the capacity to produce 33 million SWU per year. Explorts from the Soviet Union and the People`s Republic of China (PRC) currently make available an additional six million SWU per year, and that figure could rise substantially. With additional supply capability expected from China, the Soviet Union, Louisiana Energy Services (LES) and Isotope Technologies (ITI), and the increased capacity of Urenco, and possibly even AVLIS from DOE, enrichment supply capability could exceed 46 million SWU per year by the year 2000. Yet annual enrichment requirements are only estimated to grow from 23.5 million SWU in 1990, to 28.9 million SWU by 2000. Total unfilled enrichment requirements will rise significantly in the second half of the 1990s, particularly from US utilities, creating sales opportunities for which suppliers will compete aggressively. These factors foretell a very competitive market in which sellers will offer low prices and flexible contracts. The anticipation of such strong competition also raises the question of which enrichment technology will succeed, and puts tremendous pressure on all suppliers to find cost-effective means of production as quickly as possible.

  13. Total outlines world exploration, production challenges, approaches

    SciTech Connect

    Not Available

    1992-07-27

    This paper describes the current international picture of exploration/production; expresses the most prominent challenges the author sees emerging from changing conditions, and discusses briefly how the industry can and does answer these challenges. Geologic status---first, oil and gas provinces are obviously maturing. The peak of discoveries in the U.K. North Sea is well past, and if yearly additions still appear more or less stable, this happens at the expense of a larger number of exploratory wells being drilled. This is going on with variations in a number of areas. Second, the world is shrinking in terms of new prospective basins. For instance, the Norwegian Barents Sea looked so promising a few years ago but has yet to yield a major field. The case is not unique, and everyone can make his own list of disappointments: East African rift basins, Paraguay, and so on. One article pointed out that the last decade's reserve addition from wildcat oil discoveries was down by almost 40% from additions registered during 1972-81. This excluded the USSR, Eastern Europe, China, Mexico, and a couple of Middle East countries.

  14. World nuclear fuel cycle requirements 1990

    SciTech Connect

    Not Available

    1990-10-26

    This analysis report presents the projected requirements for uranium concentrate and uranium enrichment services to fuel the nuclear power plants expected to be operating under three nuclear supply scenarios. Two of these scenarios, the Lower Reference and Upper Reference cases, apply to the United States, Canada, Europe, the Far East, and other countries with free market economies (FME countries). A No New Orders scenario is presented only for the United States. These nuclear supply scenarios are described in Commercial Nuclear Power 1990: Prospects for the United States and the World (DOE/EIA-0438(90)). This report contains an analysis of the sensitivities of the nuclear fuel cycle projections to different levels and types of projected nuclear capacity, different enrichment tails assays, higher and lower capacity factors, changes in nuclear fuel burnup levels, and other exogenous assumptions. The projections for the United States generally extend through the year 2020, and the FME projections, which include the United States, are provided through 2010. The report also presents annual projections of spent nuclear fuel discharges and inventories of spent fuel. Appendix D includes domestic spent fuel projections through the year 2030 for the Lower and Upper Reference cases and through 2040, the last year in which spent fuel is discharged, for the No New Orders case. These disaggregated projections are provided at the request of the Department of Energy's Office of Civilian Radioactive Waste Management.

  15. World pipeline work set for rapid growth

    SciTech Connect

    Not Available

    1992-08-01

    This paper reports on international pipeline construction which has entered a fast-growth period, accelerated by the new political and economic realities around the world and increasing demand for natural gas, crude oil and refined petroleum products. Many projects are under way or in planning for completion in the mid- to late 1990s in Europe, South America, Asia and the Middle East. Pipeline And Gas Journal's projection calls for construction or other work on 30,700 miles of new natural gas, crude oil and refined products pipelines in the 1992-93 period outside Canada and the U.S. These projects will cost an estimated $30 billion-plus. Natural gas pipelines will comprise most of the mileage, accounting for almost 23,000 miles at an estimated cost of $26.3 billion. Products pipelines, planned or under construction, will add another 5,800 miles at a cost of $2.8 billion. Crude oil pipelines, at a minimum, will total 1,900 new miles at a cost of slightly under $1 billion.

  16. World copper smelter sulfur balance-1988

    SciTech Connect

    Towle, S.W. )

    1993-01-01

    In 1989, the US Bureau of Mines initiated a contract to gather engineering, operating, and environmental cost data for 1988 for 30 major foreign primary copper smelters in market economy countries. Data were collected for 29 of the designated smelters together with information on applicable environmental regulations. Materials balance data obtained were used with available data for the eight US smelters to determine the approximate extent of copper smelter sulfur emission control in 1988. A broad characterization of the status of sulfur emission control regulation was made. The 37 US and foreign smelters represented roughly 73.2% of world and 89.3% of market economy primary copper production in 1988. The 29 non-US smelters attained 55.3% control of their input sulfur in 1988. Combined with the 90.4% control of US smelters, an aggregate 63.4% sulfur control existed. Roughly 1,951,100 mt of sulfur was emitted from the 37 market economy smelters in 1988. Identifiable SO[sub 2] control regulations covered 72.4% of the 29 foreign smelters, representing 65.5% of smelting capacity. Including US smelters, 78.4% of the major market economy smelters were regulated, representing 73.1% of smelting capacity. Significant changes since 1988 that may increase sulfur emission control are noted.

  17. World Record Magnetic Field 100T

    SciTech Connect

    McDonald, Ross; Mielke, Chuck; Rickel, Dwight

    2012-03-22

    Scientists at the Los Alamos National Laboratory campus of the National High Magnetic Field Laboratory have successfully produced the world's first 100 Tesla non-destructive magnetic field. The achievement was decades in the making, involving a diverse team of scientists and engineers. The 100 Tesla mark was reached at approximately 3:30 p.m. on March 22, 2012. A note about the sound you'll hear when the magnet is energized: The sound that the 100 T multi-shot magnet makes is due to the electrical current modulation from the 3 phase power converters (known as 12 pulse converters) and the harmonics associated with the chopping of the sinusoidal input power. The magnet vibrates at the electrical current frequencies multiplied by 12 (i.e. ~ 55 Hz x 12 = 660 Hz) hence making an audible sound. The generator is not run at full speed (1650 RPM instead of 1800 RPM) so the frequency is slightly lower than US Line frequency (i.e. 55 Hz instead of 60 Hz). A spectrograph of the sound from the magnet pulse shows the multiple harmonics as reddish horizontal bands as a function of time.

  18. World-Wide Experience with SRF Facilities

    SciTech Connect

    Andrew Hutton, Adam Carpenter

    2011-03-01

    The speaker will review and analyze the performance of existing SRF facilities in the world, addressing issues of usage and availability for different customers (HEP research, material sciences, ADS). Lessons learned should be summarized for proposed future facilities (ILC, Project X, Muon Collider). The first use of superconducting cavities for accelerating beams was at HEPL, Stanford University in the early sixties. Rather quickly, other laboratories followed suit, notably the University of Illinois at Champagne, Urbana and Cornell University. There were two main uses, which still persist today. The first is to provide accelerated particles as an injector or for fixed target experiments. The second is to maintain circulating beams, either for synchrotron light sources or for colliding beam experiments. Given the differing requirements, these two uses led to rather different implementations and, in particular, different average operating gradients. A second difference in the implementation is the speed of the particle being accelerated. Electrons are sufficiently relativistic at low beam energies (> {approx} 5 MeV) that cavities designed for relativistic beams can also function acceptably at low energy. This is not the case for protons or ion accelerators so, until recently, copper cavities were used to cover the first {approx} 100 MeV. Superconducting cavities are now also being proposed to cover this energy range as well using a series of superconducting cavities, each of which is matched to the particle velocity.

  19. Building the World's Fastest Linux Cluster

    SciTech Connect

    Goldstone, R; Seager, M

    2003-10-24

    Imagine having 2,304 Xeon processors running day and night solving complex problems. With a theoretical peak of 11.2 teraflops, that is just what the MCR cluster at Lawrence Livermore National Labs (LLNL) is doing. Over the past several years, Lawrence Livermore National Laboratory has deployed a series of increasingly large and powerful Intel-based Linux clusters. The most significant of these is a cluster known as the MCR (Multiprogrammactic Capability Resource). With 1,152 Intel Xeon (2.4 GHz) dual-processor nodes from Linux NetworX and a high performance interconnect from Quadrics, LTD., the MCR currently ranks third on the 21st Top 500 Supercomputer Sites List and is the fastest Linux cluster in the world. This feat was accomplished with a total system cost (hardware including maintenance, in-reconnect, global file system storage) of under $14 million. Although production clusters like the MCR are still custom built supercomputers that require as much artistry as skill, the experiences of LLNL have helped clear an important path for other clusters to follow.

  20. World Energy Projection System model documentation

    SciTech Connect

    Hutzler, M.J.; Anderson, A.T.

    1997-09-01

    The World Energy Projection System (WEPS) was developed by the Office of Integrated Analysis and Forecasting within the Energy Information Administration (EIA), the independent statistical and analytical agency of the US Department of Energy. WEPS is an integrated set of personal computer based spreadsheets containing data compilations, assumption specifications, descriptive analysis procedures, and projection models. The WEPS accounting framework incorporates projections from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product GDP), and about the rate of incremental energy requirements met by natural gas, coal, and renewable energy sources (hydroelectricity, geothermal, solar, wind, biomass, and other renewable resources). Projections produced by WEPS are published in the annual report, International Energy Outlook. This report documents the structure and procedures incorporated in the 1998 version of the WEPS model. It has been written to provide an overview of the structure of the system and technical details about the operation of each component of the model for persons who wish to know how WEPS projections are produced by EIA.

  1. Kohl: A lead-hazardous eye makeup from the third world to the first world

    SciTech Connect

    Parry, C.; Eaton, J. )

    1991-08-01

    Kohl is a widely used traditional cosmetic. It is mainly worn around the eyes in Asia, Africa, and the Middle East. It may be a pervasive source of lead poisoning in those areas and among individuals from those areas who have immigrated to developed nations. Samples of kohl were purchased in Morocco, Mauritania, Great Britain, and the United States. Some of these samples originated from Pakistan, India, and Saudi Arabia. Kohl is widely believed to consist of antimony, but analysis consistently revealed only trace amounts of antimony. Nine of the twenty-two samples tested contained less than 0.6% lead; however, seven samples had lead levels in excess of 50%. The remainder ranged from 3.31 to 37.3%. Third-world-manufactured kohls were purchased in the United States and Britain, suggesting that this hazard is no longer confined to the third world. Those kohls that contained lead were sold in violation of laws on lead in cosmetics in both of these nations. Third-world physicians and health care workers appear to be unaware of possible lead uptake from unsuspected traditionally used items. Physicians in developed nations with patients from Asia, the Middle East, and North Africa need to factor in the possibility of past or present lead intake from unorthodox sources such as kohl.

  2. Design and fabrication of a low-cost Darrieus vertical axis wind turbine system. Phase I, technical report

    SciTech Connect

    Not Available

    1980-03-01

    Design and Fabrication of a Low Cost Darrieus Vertical Axis Wind Turbine System, Department of Energy Contract No. EM-78-C-04-4272, represents the first major step toward the commercialization of the Darrieus type vertical-axis wind turbine in the United States. The contract has two phases, a design phase and a fabrication and installation phase. Presented in this report is the work completed in Phase I, the design phase. As part of the Federal Wind Energy Program, the main objectives of this project are to obtain realistic fabrication cost data based on current technology and to provide a low cost system design suitable for continued production and/or to serve as a baseline for further cost reduction as well as engineering improvement efforts.

  3. Near-resonant second-order nonlinear susceptibility in c-axis oriented ZnO nanorods

    SciTech Connect

    Liu, Weiwei; Wang, Kai; Long, Hua; Wang, Bing Lu, Peixiang; Chu, Sheng

    2014-08-18

    Near-resonant second-harmonic generation (SHG) in c-axis oriented ZnO nanorods is studied under the femtosecond laser with wavelength from 780?nm to 810?nm. A highly efficient SHG is obtained, which is attributed to the d{sub 131} component of the second-order nonlinear susceptibility. The largest d{sub 131} value is estimated to be 10.2?pm/V at the pumping wavelength of 800?nm, which indicates a large SHG response of the c-axis oriented ZnO nanorods in the near-resonant region. Theoretical calculation based on finite-difference time-domain simulation suggests a four-fold local-field enhancement of the SHG.

  4. World gas supply seen ample for decades as demand expands

    SciTech Connect

    Not Available

    1992-11-09

    Considering the prospect for new natural gas discoveries, the world gas reserves to production ratio is expected to exceed 100 years by 2000 and will still be about 80 years in 2020. World natural gas reserves were estimated at 327 trillion cu m in 1989, of which 118 trillion cu m were considered proved. Only 15% of world gas reserves lie in the Middle East, J. Balazuc, Gaz de France production and transport manager, told the World Energy Council meeting in Berlin. World gas reserves continue to grow, with the strongest growth in Africa and the Asia-Pacific region, Balazuc said. World gas production, estimated to have been 2 trillion cu m in 1989, is expected to grow to 2.5 trillion cu m in 2000 and 2.8-3.0 trillion cu m in 2020, depending on the price.

  5. Iraq: Eastern flank of the Arab world

    SciTech Connect

    Helms, C.M.

    1984-01-01

    Iraq, holding oil reserves second only to those of Saudi Arabia in the Middle East, is locked in a war with Iran whose outcome will affect Western energy supplies and the prospects for stability in the Arabian Gulf. Yet Iraq even now remains little known to Western governments and publics. This study is intended to enlarge understanding of Iraqi behavior and of the concerns that motivate its leaders. Rather than selecting issues of importance to other countries, the author focuses on the forces that influence policy formulation in Iraq and evokes the perspective from which the Iraqi government itself views its problems and sets its priorities. Part 1 examines the country's evolution into modern Iraq, explaining why problems that have recurred throughout Iraqi history have bedeviled all recent Iraqi governments and created tension between ''Iraq the nation'' and ''Iraq the state.'' Part 2 discusses the Arab Ba'th Socialist party, which has dominated Iraqi political life since 1968. The author neither condemns nor praises this controversial party and its current leader, President Saddam Husain, but seeks to explain why they have adopted the positions and taken the actions that have characterized their rule. Part 3 analyzes the war between Iraq and Iran, its causes, and the decisions Iraq has made in light of its goals and its assumptions about Iran. The author finds that this is not simply ''a war over borders'' but a deeper conflict between Islamic conservatism and Arab nationalism. Looking beyond the war, the final chapter assesses Iraq's potential importance in the Middle East and to the world economy. 8 figs.

  6. Improving consumer value through enhanced performance around the world

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Improving consumer value through enhanced performance around the world Improving consumer value through enhanced performance around the world LANL statistical tools have helped create Reliability Technology (RT), which increases the overall fraction of productive manufacturing time, or "uptime," for its internal manufacturing lines. April 3, 2012 Improving consumer value through enhanced performance around the world Reliability Technology (RT) is a comprehensive reliability engineering

  7. Risk Informing Regulations in an Uncertain World | Department of Energy

    Office of Environmental Management (EM)

    Regulations in an Uncertain World Risk Informing Regulations in an Uncertain World Presentation from the 2016 Annual Performance and Risk Assessment (P&RA) Community of Practice (CoP) Technical Exchange Meeting held in Germantown, Maryland on October 19-20, 2016. Risk Informing Regulations in an Uncertain World (965.93 KB) More Documents & Publications 2016 Annual Technical Exchange Meeting Presenters Biographical Sketches Agenda for the October 19-20, 2016 - Technical Exchange Meeting -

  8. Building a World of Difference | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building a World of Difference Building a World of Difference Waste-to-Energy Roadmapping Workshop Building a World of Difference Presentation by Patricia Scanlan, Director of Residuals Treatment Technologies, Black & Veatch scanlan_waste_to_energy_2014.pdf (1.34 MB) More Documents & Publications Waste-to-Energy Workshop Summary Report Biogas Opportunities Roadmap Biomass Program Perspectives on Anaerobic Digestion and Fuel Cell Integration at Biorefineries

  9. Workplace Charging Challenge Partner: World Wildlife Fund | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Wildlife Fund Workplace Charging Challenge Partner: World Wildlife Fund Workplace Charging Challenge Partner: World Wildlife Fund Joined the Challenge: April 2014 Headquarters: Washington, DC Charging Location: Washington, DC Domestic Employees: 470 World Wildlife Fun (WWF) works in 100 countries and is supported by 1.2 million members in the United States and close to 5 million globally in their conservation efforts. WWF's unique way of working combines global reach with a foundation

  10. Secretary Chu Joins with World Leaders to Sign International Partnership

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    for Energy Efficiency Cooperation | Department of Energy Joins with World Leaders to Sign International Partnership for Energy Efficiency Cooperation Secretary Chu Joins with World Leaders to Sign International Partnership for Energy Efficiency Cooperation May 24, 2009 - 12:00am Addthis The Department of Energy announced today that U.S. Energy Secretary Steven Chu joined with top energy leaders from around the world to launch the International Partnership for Energy Efficiency Cooperation

  11. Energy Secretary Moniz Dedicates World's Largest Concentrating Solar

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Power Project | Department of Energy Dedicates World's Largest Concentrating Solar Power Project Energy Secretary Moniz Dedicates World's Largest Concentrating Solar Power Project February 13, 2014 - 5:00am Addthis NEWS MEDIA CONTACT (202) 586-4940 Energy Secretary Ernest Moniz will participate today in the opening of the Ivanpah Solar Energy Generating System, the world's largest concentrating solar power (CSP) plant. As President Obama highlighted in his State of the Union address, the

  12. Los Alamos achieves world-record pulsed magnetic field

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos achieves world-record pulsed magnetic field Los Alamos achieves world-record pulsed magnetic field Researchers have set a new world record for the strongest magnetic field produced by a nondestructive magnet. August 23, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

  13. Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps Advance

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America's Solar Leadership | Department of Energy Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps Advance America's Solar Leadership Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps Advance America's Solar Leadership April 29, 2014 - 8:40am Addthis Agua Caliente, located in Yuma County, Arizona, is now the largest solar photovoltaic power plant in the world. | Photo courtesy of NRG Energy. Agua Caliente, located in Yuma County, Arizona, is now the largest solar

  14. Fact #840: September 29, 2014 World Renewable Electricity Consumption is

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Growing - Dataset | Department of Energy 40: September 29, 2014 World Renewable Electricity Consumption is Growing - Dataset Fact #840: September 29, 2014 World Renewable Electricity Consumption is Growing - Dataset Excel file with dataset for Fact #840: World Renewable Electricity Consumption is Growing fotw#840_web.xlsx (19.51 KB) More Documents & Publications Quarterly Analysis Review February 2015 Fact #892: September 28, 2015 Over One-Million in Plug-in Vehicle Sales Worldwide -

  15. SCHNEIDER ELECTRIC 2015 WORLD ENERGY ENGINEERING CONGRESS | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Technical Assistance » Superior Energy Performance » SCHNEIDER ELECTRIC 2015 WORLD ENERGY ENGINEERING CONGRESS SCHNEIDER ELECTRIC 2015 WORLD ENERGY ENGINEERING CONGRESS sep_logo_borderless.jpg This presentation by Schneider Electric at the 2015 World Energy Engineering Congress shares the costs and benefits of enterprise-wide implementation of Superior Energy Performance® (SEP(tm)) and ISO 50001. Schneider Electric WEEC 2015 (September 2015) (678.24 KB) More Documents &

  16. DOE's Oak Ridge Supercomputer Now World's Fastest for Open Science |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Supercomputer Now World's Fastest for Open Science DOE's Oak Ridge Supercomputer Now World's Fastest for Open Science November 10, 2008 - 4:47pm Addthis OAK RIDGE, Tenn. -- The latest upgrade to the Cray XT Jaguar supercomputer at the Department of Energy's (DOE's) Oak Ridge National Laboratory (ORNL) has increased the system's computing power to a peak 1.64 "petaflops," or quadrillion mathematical calculations per second, making Jaguar the world's first

  17. World Renewable Energy Congress Provides International Forum - News

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Releases | NREL World Renewable Energy Congress Provides International Forum Delegates to gather in Denver to share knowledge, ideas, on energy issues November 14, 2003 Denver, Colo. - Energy ministers, deputy ministers or other representatives from as many as 100 countries are expected to participate in the world's largest gathering of renewable energy experts in Denver, Aug. 28-Sept. 3, 2004. The eighth World Renewable Energy Congress (WREC VIII) will provide a forum for energy suppliers

  18. World record neutron beam at Los Alamos National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World record neutron beam at LANL World record neutron beam at Los Alamos National Laboratory Scientists have created the largest neutron beam ever made by a short-pulse laser, breaking a world record. July 10, 2012 Tom Hurry of Plasma Physics adjusts the target positioner and particle beam diagnostics prior to an experiment at Trident. Tom Hurry of Plasma Physics adjusts the target positioner and particle beam diagnostics prior to an experiment at Trident. Contact Kevin Roark Communications

  19. Keeping nuclear materials secure in an uncertain world

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Keeping nuclear materials secure in an uncertain world Keeping nuclear materials secure in an uncertain world During the last year, the Iran nuclear deal has successfully rolled back Iran's nuclear program. Los Alamos National Laboratory was integral to verification and training. October 24, 2016 Atoms for Peace Los Alamos archives Keeping nuclear materials secure in an uncertain world This summer marked the one-year anniversary of the conclusion of the Iran nuclear deal. Signed by

  20. Expanding the World's Largest Database of Elastic Properties

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Expanding the World's Largest Database of Elastic Properties Expanding the World's Largest Database of Elastic Properties NERSC, Materials Project Help Scientists Increase Available Data Almost Ten-Fold April 7, 2015 Contact: Julie Chao, jchao@lbl.gov, 510.486.6491 Scientists at the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) have published the world's largest set of data on the complete elastic properties of inorganic compounds, increasing by an order of

  1. UK Energy Minister to Address World Renewable Energy Congress - News

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Releases | NREL UK Energy Minister to Address World Renewable Energy Congress Conference, Expo to Bring International 'Clean Energy' experts to Denver April 7, 2004 Golden, Colo. - Stephen Timms, energy minister for the United Kingdom will speak to delegates from as many as 100 nations at the opening ceremony of the eighth World Renewable Energy Congress (WREC VIII) in Denver on Aug. 30. Expected to be the world's largest gathering of renewable energy experts, WREC VIII will provide a forum

  2. EERE Success Story-Solar Junction Develops World Record Setting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Concentrated Photovoltaic Solar Cell | Department of Energy Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - 12:00am Addthis Partnering with Solar Junction of San Jose, EERE supported the development of the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on

  3. Jefferson Lab Fall Lecture: Exploring Our World With Particle Accelerators

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Jefferson Lab Fall Lecture: Exploring Our World With Particle Accelerators Jefferson Lab Fall Lecture: Exploring Our World With Particle Accelerators NEWPORT NEWS, Va., Nov. 9, 2010 - Jefferson Lab's 2010 Fall Science Lecture Series concludes on Tuesday, Nov. 23, with James E. Brau, University of Oregon, presenting "The Mysterious Universe: Exploring Our World with Particle Accelerators." The universe is dark and mysterious, more so than even Einstein imagined, Brau says. While

  4. Six-axis multi-anvil press for high-pressure, high-temperature neutron diffraction experiments

    SciTech Connect

    Sano-Furukawa, A. Hattori, T.; Arima, H.; Yamada, A.; Tabata, S.; Kondo, M.; Nakamura, A.; Kagi, H.; Yagi, T.

    2014-11-15

    We developed a six-axis multi-anvil press, ATSUHIME, for high-pressure and high-temperature in situ time-of-flight neutron powder diffraction experiments. The press has six orthogonally oriented hydraulic rams that operate individually to compress a cubic sample assembly. Experiments indicate that the press can generate pressures up to 9.3 GPa and temperatures up to 2000 K using a 6-6-type cell assembly, with available sample volume of about 50 mm{sup 3}. Using a 6-8-type cell assembly, the available conditions expand to 16 GPa and 1273 K. Because the six-axis press has no guide blocks, there is sufficient space around the sample to use the aperture for diffraction and place an incident slit, radial collimators, and a neutron imaging camera close to the sample. Combination of the six-axis press and the collimation devices realized high-quality diffraction pattern with no contamination from the heater or the sample container surrounding the sample. This press constitutes a new tool for using neutron diffraction to study the structures of crystals and liquids under high pressures and temperatures.

  5. Dithiocarbamates have a common toxic effect on zebrafish body axis formation

    SciTech Connect

    Tilton, Fred; La Du, Jane K.; Vue, Meng; Alzarban, Noor; Tanguay, Robert L. . E-mail: Robert.Tanguay@oregonstate.edu

    2006-10-01

    We previously determined that the dithiocarbamate pesticide sodium metam (NaM) and its active ingredient methylisothiocyanate (MITC) were developmentally toxic causing notochord distortions in the zebrafish. In this study, developing zebrafish were exposed to isothiocyanates (ITCs), dithiocarbamates (DTCs) and several degradation products to determine the teratogenic relationship of these chemical classes at the molecular level. All dithiocarbamates tested elicited notochord distortions with notochord NOELs from <4 to 40 ppb, while none of the ITCs caused notochord distortions with the exception of MITC. Carbon disulfide (CS{sub 2}), a common DTC degradate, also caused distortions at concentrations >200 times the DTCs. Whole mount in situ hybridization of developmental markers for collagen (collagen2a1), muscle (myoD), and body axis formation (no tail) was perturbed well after cessation of treatment with pyrolidine-DTC (PDTC), dimethyl-DTC (DMDTC), NaM, MITC, and CS{sub 2}. Therefore, distinct albeit related chemical classes share a common toxic effect on zebrafish notochord development. To test the responsiveness of the distortion to metal perturbation, five metal chelators and 2 metals were studied. The membrane permeable copper chelator neocuproine (NCu) was found to cause notochord distortions similar to DTC-related molecules. DMDTC and NCu treated animals were protected with copper, and collagen 2a1 and no tail gene expression patterns were identical to controls in these animals. PDTC, NaM, MITC, and CS{sub 2} were not responsive to copper indicating that the chelation of metals is not the primary means by which these molecules elicit their developmental toxicity. Embryos treated with DMDTC, NaM, and NCu were rescued by adding triciaine (MS-222) which abolishes the spontaneous muscle contractions that begin at 18 hpf. In these animals, only collagen 2a1 expression showed a similar pattern to the other notochord distorting molecules. This indicates that the

  6. Dual Axis Radiographic Hydrodynamic Test Facility mitigation action plan. Annual report for 1997

    SciTech Connect

    Haagenstad, H.T.

    1998-01-15

    This Mitigation Action Plan Annual Report (MAPAR) has been prepared by the US Department of Energy (DOE) as part of implementing the Dual Axis Radiographic Hydrodynamic Test Facility (DARHT) Mitigation Action Plan (MAP). This MAPAR provides a status on specific DARHT facility design- and construction-related mitigation actions that have been initiated in order to fulfill DOE`s commitments under the DARHT MAP. The functions of the DARHT MAP are to (1) document potentially adverse environmental impacts of the Phased Containment Option delineated in the Final EIS, (2) identify commitments made in the Final EIS and ROD to mitigate those potential impacts, and (3) establish Action Plans to carry out each commitment (DOE 1996). The DARHT MAP is divided into eight sections. Sections 1--5 provide background information regarding the NEPA review of the DARHT project and an introduction to the associated MAP. Section 6 references the Mitigation Action Summary Table which summaries the potential impacts and mitigation measures; indicates whether the mitigation is design-, construction-, or operational-related; the organization responsible for the mitigation measure; and the projected or actual completion data for each mitigation measure. Sections 7 and 8 discuss the Mitigation Action Plan Annual Report and Tracking System commitment and the Potential Impacts, Commitments, and Action Plans respectively. Under Section 8, potential impacts are categorized into five areas of concern: General Environment, including impacts to air and water; Soils, especially impacts affecting soil loss and contamination; Biotic Resources, especially impacts affecting threatened and endangered species; Cultural/Paleontological Resources, especially impacts affecting the archeological site known as Nake`muu; and Human Health and Safety, especially impacts pertaining to noise and radiation. Each potential impact includes a brief statement of the nature of the impact and its cause(s). The commitment

  7. Visualization of Fiber Structurein the Left and Right Ventricleof a Human Heart

    SciTech Connect

    Rohmer, Damien; Sitek, Arkadiusz; Gullberg, Grant T.

    2006-07-12

    The human heart is composed of a helical network of musclefibers. Anisotropic least squares filtering followed by fiber trackingtechniques were applied to Diffusion Tensor Magnetic Resonance Imaging(DTMRI) data of the excised human heart. The fiber configuration wasvisualized by using thin tubes to increase 3-dimensional visualperception of the complex structure. All visualizations were performedusing the high-quality ray-tracing software POV-Ray. The fibers are shownwithin the left and right ventricles. Both ventricles exhibit similarfiber architecture and some bundles of fibers are shown linking right andleft ventricles on the posterior region of the heart.

  8. Jefferson Lab hosts World Year of Physics guest speaker Erich...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Erich Vogt discussing Einstein - the Person and His Legacy Erich Vogt Jefferson Lab hosts World Year of Physics guest speaker Erich Vogt discussing Einstein - the Person and His ...

  9. Secretary Chu's Remarks at the World Renewable Energy Forum Press...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    energy coupled with digital communication, management and manufacturing. A century ago, Albert Einstein showed the world that the mass of a particle has an intrinsic energy given...

  10. World's Largest Concentrating Solar Power Plant Opens in California...

    Energy.gov [DOE] (indexed site)

    The Ivanpah Solar Electric Generating System, the world's largest concentrating solar power (CSP) plant, officially opened on February 13. As the first commercial deployment of ...

  11. Fact #839: September 22, 2014 World Petroleum Consumption Continues...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Petroleum Consumption Continues to Rise despite Declines from the United States and Europe - Dataset Fact 839: September 22, 2014 World Petroleum Consumption Continues to ...

  12. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on inexpensive lenses to magnify...

  13. Energy Efficiency Olympiad: Best Practices from Around the World (201)

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Energy Efficiency Olympiad: Best Practices from Around the World (201), call slides and discussion summary.

  14. World's largest single crystal of gold verified by Los Alamos...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Los Alamos verifies largest single gold crystal World's largest single crystal of gold verified by Los Alamos instruments Using Lujan Center's HIPPO instrument, researchers probed ...

  15. World Wind and Water Energy LLC | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    and Water Energy LLC Jump to: navigation, search Name: World Wind and Water Energy LLC Place: Delaware Sector: Wind energy Product: Delaware-based company focused on developing...

  16. BP Statistical Review of World Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    OpenEI The BP Statistical Review of World Energy is an Excel spreadsheet which contains consumption and production data for Coal, Natural Gas, Nuclear, Oil, and Hydroelectric...

  17. World Renewable Energy Network WREN | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Renewable Energy Network WREN Jump to: navigation, search Name: World Renewable Energy Network (WREN) Place: Brighton, United Kingdom Zip: BN2 1YH Sector: Renewable Energy Product:...

  18. Comparison of Real World Energy Consumption to Models and DOE...

    Energy.gov [DOE] (indexed site)

    It first identifies and prioritizes the appliances to be evaluated. Then, the study determines whether real world energy consumption differed substantially from predictions and ...

  19. Key World Energy Statistics-2010 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    World Energy Statistics-2010 AgencyCompany Organization: International Energy Agency Sector: Energy Topics: Market analysis Resource Type: Dataset, Maps Website: www.iea.org...

  20. World War II Fuel Shortages Spur Veteran into Action

    Office of Energy Efficiency and Renewable Energy (EERE)

    How Dr. Alex Green's experiences over the Pacific during World War II have shaped his path as a leading biofuels researcher.

  1. World Bank Climate Innovation Centers | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    America and the Caribbean) for this property. References Climate Innovation Center Business Plans1 InfoDev2 World Bank Climate Innovation Centers Screenshot "The CIC works...

  2. Renewable Energy World Conference and Expo North America

    Office of Energy Efficiency and Renewable Energy (EERE)

    Renewable Energy World Conference & Expo North America will be co-located with Power Generation Week, providing networking opportunities with 20,000+ professionals and key decision makers.

  3. TechConnect World Innovation Conference and Expo 2015

    Office of Energy Efficiency and Renewable Energy (EERE)

    The TechConnect World Innovation Conference is an annual event uniquely designed to accelerate the commercialization of innovations out of the lab and into industry.

  4. Agua Caliente, World's Largest Solar Photovoltaic Plant, Helps...

    Energy.gov [DOE] (indexed site)

    Agua Caliente, located in Yuma County, Arizona, is now the largest solar photovoltaic power plant in the world. | Photo courtesy of NRG Energy. Agua Caliente, located in Yuma ...

  5. Sandia Team Attends World Water Week in Stockholm

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Team Attends World Water Week in Stockholm - Sandia Energy Energy Search Icon Sandia Home ... Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 ...

  6. World Wind Energy Association WWEA | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Zip: 53113 Sector: Renewable Energy Product: WWEA plays an active role in the World Council for Renewable Energies and cooperates with further international renewable energy...

  7. World Council for Renewable Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    for Renewable Energy Jump to: navigation, search Name: World Council for Renewable Energy Place: Bonn, North Rhine-Westphalia, Germany Zip: 53113 Sector: Renewable Energy Product:...

  8. Energy Secretary Chu Applauds World's First All-Renewable Power...

    Energy Saver

    Secretary Chu Applauds World's First All-Renewable Power Plant in Nevada Energy Secretary Chu Applauds ... how we can tap renewable energy sources to provide clean power for ...

  9. Language barrier broken with Multilingual WorldWideScience.org...

    Office of Scientific and Technical Information (OSTI)

    Hey, Microsoft Research Corporate Vice-President; Richard Boulderstone of the British Library and the WorldWideScience Alliance Chairman; and Wu Yishan, Institute of Scientific and ...

  10. Better Plants Shines at 2016 World Energy Engineering Congress | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Better Plants Shines at 2016 World Energy Engineering Congress Better Plants Shines at 2016 World Energy Engineering Congress Addthis Description Below is the text version for the "Better Plants Shines at 2016 World Energy Engineering Congress" video. Jeremy Kahn-EERE Digital Team Hi everyone, I'm Jeremy Kahn with the EERE Digital Team at the 2016 World Energy Engineering Congress in Washington, D.C., where our Better Plants Program is taking center stage and improving

  11. World Institute of Sustainable Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sustainable Energy Jump to: navigation, search Name: World Institute of Sustainable Energy Place: Pune, Maharashtra, India Zip: 411 006. Sector: Renewable Energy Product: Works as...

  12. Blog advises: Stop traipsing the World Wide Web, start searching

    Office of Scientific and Technical Information (OSTI)

    WorldWideScience | OSTI, US Dept of Energy Office of Scientific and Technical Information Blog advises: Stop traipsing the World Wide Web, start searching WorldWideScience Back to the OSTI News Listing for 2012 A blog from the American Printing House for the Blind gives an assessment of WorldWideScience.org: "In terms that the rest of us can understand, this website is a way for researchers, scientists, students, and science enthusiasts to search worldwide science databases all at once.

  13. Energy Efficiency Olympiad: Best Practices from Around the World...

    Energy Saver

    Energy Efficiency Olympiad: Best Practices from Around the World (201) Better Buildings Residential Network Peer Exchange Call Series: Energy Efficiency Olympiad: Best Practices ...

  14. Status and Distribution of Mangrove Forests of the World Using...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Status and Distribution of Mangrove Forests of the World Using Earth Observation Satellite ... by using disparate geospatial data sources and national statistics, need to be improved. ...

  15. What the World's Greatest Energy Managers Do Differently

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    the World's GREATEST Energy Managers Do Differently? Nasr Alkadi, PhD, CEM U.S. DOE Advanced Manufacturing Office (AMO) Tuesday Webcast for Industry Role of an Energy Manager July 10, 2012 Oak Ridge National Laboratory (ORNL) is DOE's Largest Science and Energy Laboratory  World's most powerful open scientific computer  Operating the world's most intense pulsed neutron source and a world-class research reactor  $1.4B budget  4,550 employees  4,000 research guests annually 

  16. Nonlinear coupling of left and right handed circularly polarized dispersive Alfvén wave

    SciTech Connect

    Sharma, R. P. Sharma, Swati Gaur, Nidhi

    2014-07-15

    The nonlinear phenomena are of prominent interests in understanding the particle acceleration and transportation in the interplanetary space. The ponderomotive nonlinearity causing the filamentation of the parallel propagating circularly polarized dispersive Alfvén wave having a finite frequency may be one of the mechanisms that contribute to the heating of the plasmas. The contribution will be different of the left (L) handed mode, the right (R) handed mode, and the mix mode. The contribution also depends upon the finite frequency of the circularly polarized waves. In the present paper, we have investigated the effect of the nonlinear coupling of the L and R circularly polarized dispersive Alfvén wave on the localized structures formation and the respective power spectra. The dynamical equations are derived in the presence of the ponderomotive nonlinearity of the L and R pumps and then studied semi-analytically as well as numerically. The ponderomotive nonlinearity accounts for the nonlinear coupling between both the modes. In the presence of the adiabatic response of the density fluctuations, the nonlinear dynamical equations satisfy the modified nonlinear Schrödinger equation. The equations thus obtained are solved in solar wind regime to study the coupling effect on localization and the power spectra. The effect of coupling is also studied on Faraday rotation and ellipticity of the wave caused due to the difference in the localization of the left and the right modes with the distance of propagation.

  17. Method and device for determining the position of a cutting tool relative to the rotational axis of a spindle-mounted workpiece

    DOEpatents

    Williams, R.R.

    1980-09-03

    The present invention is directed to a method and device for determining the location of a cutting tool with respect to the rotational axis of a spindle-mounted workpiece. A vacuum cup supporting a machinable sacrificial pin is secured to the workpiece at a location where the pin will project along and encompass the rotational axis of the workpiece. The pin is then machined into a cylinder. The position of the surface of the cutting tool contacting the machine cylinder is spaced from the rotational axis of the workpiece a distance equal to the radius of the cylinder.

  18. U.S., Canada continue dominance of world`s gas processing

    SciTech Connect

    True, W.R.

    1997-06-02

    Gas plants in the US and Canada continued to lead the rest of the world in processing capacity, throughput, and NGL production in 1996. The consolidation of gas-processing assets that has been rolling through US companies in recent years continued to limit growth in new capacity. Canadian liquids producers, on the other hand, will likely benefit from increased gas production and export sales to the US when a clutch of pipeline expansions in the next 18--30 months eases the capacity constraints on gas movements southward. And, markets and suppliers around the world continue to become more closely dependent on each other, stimulating new capacity and production. US capacity stood at slightly more than 678 bcfd as of January 1, 1997; throughput for 1996 averaged 48.8 bcfd; and NGL production exceeded 76,000 gpd. Canadian gas-processing capacity last year approached 40 bcfd. Gas-processing throughput there averaged more than 30.8 bcfd; NGL production fell to slightly more than 42,000 gpd. Oil and Gas Journal`s most recent exclusive, plant-by-plant, worldwide gas-processing survey and its international survey of petroleum-derived sulfur recovery reflect these trends. This report supplements operator-supplied capacity and production data for Alberta with figures from the (1) Alberta Energy and Utilities Board (AEUB), formerly the Energy Resources Conservation Board (ERBC), (2) British Columbia Ministry of Employment and Investment`s Engineering and Operations Branch, and (3) Saskatchewan Ministry of Energy and Mines.

  19. Energy Advising Services in the Post-ARRA World

    Office of Energy Efficiency and Renewable Energy (EERE)

    Better Buildings Residential Network Workforce / Business Partners Peer Exchange Call: Energy Advising Services in the Post-ARRA World, Call Slides and Summary, June 27, 2013. This peer exchange call discussed energy advising services in the post­-ARRA world.

  20. World Energy Projection System Plus (WEPS ): Global Activity Module

    Reports and Publications

    2013-01-01

    World Energy Projection System Plus Model Documentation: Global Activity Module Documents the objectives, analytical approach, and development of the World Energy Projection Plus (WEPS ) Global Activity Module (GAM) used to develop the International Energy Outlook for 2013 (IEO2013). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code.

  1. EIA model documentation: World oil refining logistics demand model,``WORLD`` reference manual. Version 1.1

    SciTech Connect

    Not Available

    1994-04-11

    This manual is intended primarily for use as a reference by analysts applying the WORLD model to regional studies. It also provides overview information on WORLD features of potential interest to managers and analysts. Broadly, the manual covers WORLD model features in progressively increasing detail. Section 2 provides an overview of the WORLD model, how it has evolved, what its design goals are, what it produces, and where it can be taken with further enhancements. Section 3 reviews model management covering data sources, managing over-optimization, calibration and seasonality, check-points for case construction and common errors. Section 4 describes in detail the WORLD system, including: data and program systems in overview; details of mainframe and PC program control and files;model generation, size management, debugging and error analysis; use with different optimizers; and reporting and results analysis. Section 5 provides a detailed description of every WORLD model data table, covering model controls, case and technology data. Section 6 goes into the details of WORLD matrix structure. It provides an overview, describes how regional definitions are controlled and defines the naming conventions for-all model rows, columns, right-hand sides, and bounds. It also includes a discussion of the formulation of product blending and specifications in WORLD. Several Appendices supplement the main sections.

  2. Rare top quark and Higgs boson decays in alternative left-right symmetric models

    SciTech Connect

    Gaitan, R.; Miranda, O.G.; Cabral-Rosetti, L.G.

    2005-08-01

    Top quark and Higgs boson decays induced by flavor-changing neutral currents (FCNC) are very much suppressed in the standard model. Their detection in colliders such as the Large Hadron Collider, Next Linear Collider, or Tevatron would be a signal of new physics. We evaluate the FCNC decays t{yields}H{sup 0}+c, t{yields}Z+c, and H{sup 0}{yields}t+c in the context of alternative left-right symmetric models with extra isosinglet heavy fermions; in this case, FCNC decays occur at tree level, and they are suppressed only by the mixing between ordinary top and charm quarks, which is poorly constrained by current experimental values. This provides the possibility for future colliders either to detect new physics or to improve present bounds on the parameters of the model.

  3. Non-polar InGaN quantum dot emission with crystal-axis oriented linear polarization

    SciTech Connect

    Reid, Benjamin P. L. Chan, Christopher C. S.; Taylor, Robert A.; Kocher, Claudius; Zhu, Tongtong; Oehler, Fabrice; Oliver, Rachel A.

    2015-04-27

    Polarization sensitive photoluminescence is performed on single non-polar InGaN quantum dots. The studied InGaN quantum dots are found to have linearly polarized emission with a common polarization direction defined by the [0001] crystal axis. Around half of ∼40 studied dots have a polarization degree of 1. For those lines with a polarization degree less than 1, we can resolve fine structure splittings between −800 μeV and +800 μeV, with no clear correlation between fine structure splitting and emission energy.

  4. Preliminary analysis of the audible noise of constant-speed, horizontal-axis wind-turbine generators

    SciTech Connect

    Keast, D. N.; Potter, R. C.

    1980-07-01

    An analytical procedure has been developed for calculating certain aerodynamic sound levels produced by large, horizontal-axis wind-turbine generators (WTG's) such as the DOE/NASA Mods-0, -0A, -1, and -2. This preliminary procedure is based upon very limited field data from the Mod-0. It postulates a noise component due to the (constant) rotation of the blades of the WTG, plus a wake-noise component that increases with the square of the power produced by the WTG. Mechanical sound from machinery, and low-frequency impulsive sounds produced by blade interaction with the wake of the support tower are not considered.

  5. Design, performance, and economics of 50-kW and 500-kW vertical axis wind turbines

    SciTech Connect

    Schienbein, L.A.; Malcolm, D.J.

    1983-11-01

    A review of the development and performance of the DAF Indal 50-kW vertical axis Darrieus wind turbine shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. Details are also presented of a 500-kW VAWT that is currently in production. A discussion of the economics of both the 50-kW and 500-kW VAWTs is included, showing the effects of charge rate, installed cost, operating cost, performance, and efficiency. 6 references.

  6. Design, performance, and economics of 50-kW and 500-kW vertical axis wind turbines

    SciTech Connect

    Scheinbein, L.A.; Malcolm, D.J.

    1983-11-01

    A review of the development and performance of the DAF Indal 50-kW vertical axis Darrieus wind turbine shows that a high level of technical development and reliability has been achieved. Features of the drive train, braking and control systems are discussed and performance details are presented. Details are also presented of a 500-kW VAWT that is currently in production. A discussion of the economics of both the 50-kW and 500-kW VAWTs is included, showing the effects of charge rate, installed cost, operating cost, performance, and efficiency.

  7. Magnetic domain structure in nanocrystalline Ni-Zn-Co spinel ferrite thin films using off-axis electron holography

    SciTech Connect

    Zhang, D.; Ray, N. M.; Petuskey, W. T.; Smith, D. J.; McCartney, M. R.

    2014-08-28

    We report a study of the magnetic domain structure of nanocrystalline thin films of nickel-zinc ferrite. The ferrite films were synthesized using aqueous spin-spray coating at low temperature (?90?C) and showed high complex permeability in the GHz range. Electron microscopy and microanalysis revealed that the films consisted of columnar grains with uniform chemical composition. Off-axis electron holography combined with magnetic force microscopy indicated a multi-grain domain structure with in-plane magnetization. The correlation between the magnetic domain morphology and crystal structure is briefly discussed.

  8. Development of more efficient impellers for horizontal axis windmills. Final report, October 1, 1980-April 30, 1982

    SciTech Connect

    Fosdick, G.A. Jr.

    1982-01-01

    The purpose of the project reported has been the development of a wind turbine incorporating a new concept in horizontal-axis impellers. The impeller consists of six rows of radial blades arranged to extend in a spiral covering 55/sup 0/ of arc about a hollow support section. Each blade in the rows is contoured to receive both direct flow pressure as well as airfoil lift in order to provide maximum energy transfers from low velocity airflows such as those normally found in most localities throughout the country most of the time. A disclosure of the wind turbine configuration is attached. (LEW)

  9. Use of off-axis injection as an alternative to geometrically merging beams in an energy-recovering linac

    DOEpatents

    Douglas, David R.

    2012-01-10

    A method of using off-axis particle beam injection in energy-recovering linear accelerators that increases operational efficiency while eliminating the need to merge the high energy re-circulating beam with an injected low energy beam. In this arrangement, the high energy re-circulating beam and the low energy beam are manipulated such that they are within a predetermined distance from one another and then the two immerged beams are injected into the linac and propagated through the system. The configuration permits injection without geometric beam merging as well as decelerated beam extraction without the use of typical beamline elements.

  10. Innovative tailgate support for heavy ground: 11 left longwall panel, Cyprus Shoshone Mine

    SciTech Connect

    Woomer, C.C.; Stewart, C.

    1995-11-01

    Cyprus Shoshone Mines uses the longwall method to extract a deep, thick, pitching coal seam in the Hanna Basin of South Central Wyoming. The immediate, and main roof rock consists of weak, thinly-bedded, silty mudstones with weak, interbedded fine-to medium-grained sandstone. Tailgate ground control has been a critical factor impacting productivity at the mine. A gateroad condition mapping program for the 11 left longwall gateroads indicated potentially severe ground control problems for the tailgate. It was predicted that the existing, secondary support pattern of wood cribs would not provide adequate support capacity. Longwall coordinators and engineers made the decision to use a low density, pumpable cement known to the industry as Tekseal{trademark}, to provide the system required. A 200 psi ultimate strength mix was decided on to provide the required load capacity. The existing cribs were formed with 1-in. by 6-in. boards and brattice cloth to provide the containment. To overcome the access limitations, three boreholes were drilled from the surface to the tailgate on 2,000-ft centers. A mobile pumping station was established on the surface and the Tekseal{trademark} was pumped 900-ft. down the boreholes through a 1.5-in. steep pipe, then as much as 1,800-ft. along the tailgate entry through 1.25-in. miner spray hose. The materials required for the Tekseal{trademark} supports could all be carried into the construction locations by hand. As a direct result of incorporating relatively new methods of pumping high yield, low density, cementitious grout, the Shoshone Mine reduced downtime due to tailgate ground control problems by approximately 70% in comparison with previous longwall panels. The longwall set three monthly production records while mining the 11 left longwall under the deepest cover, steepest pitch, and most extreme ground control conditions ever encountered at the mine.

  11. Intrahepatic Left to Right Portoportal Venous Collateral Vascular Formation in Patients Undergoing Right Portal Vein Ligation

    SciTech Connect

    Lienden, K. P. van; Hoekstra, L. T.; Bennink, R. J.; Gulik, T. M. van

    2013-12-15

    Purpose: We investigated intrahepatic vascular changes in patients undergoing right portal vein ligation (PVL) or portal vein embolization (PVE) in conjunction with the ensuing hypertrophic response and function of the left liver lobe. Methods: Between December 2008 and October 2011, 7 patients underwent right PVL and 14 patients PVE. Computed tomographic (CT) volumetry to assess future remnant liver (FRL) and functional hepatobiliary scintigraphy were performed in all patients before and 3 weeks after portal vein occlusion. In 18 patients an intraoperative portography was performed to assess perfusion through the occluded portal branches. Results: In all patients after initially successful PVL, reperfused portal veins were observed on CT scan 3 weeks after portal occlusion. This was confirmed in all cases during intraoperative portography. Intrahepatic portoportal collaterals were identified in all patients in the PVL group and in one patient in the PVE group. In all other PVE patients, complete occlusion of the embolized portal branches was observed on CT scan and on intraoperative portography. The median increase of FRL volume after PVE was 41.6 % (range 10-305 %), and after PVL was only 8.1 % (range 0-102 %) (p = 0.179). There were no differences in FRL function between both groups. Conclusion: Preoperative PVE and PVL are both methods to induce hypertrophy of the FRL in anticipation of major liver resection. Compared to PVE, PVL seems less efficient in inducing hypertrophy of the nonoccluded left lobe. This could be caused by the formation of intrahepatic portoportal neocollateral vessels, through which the ligated portal branches are reperfused within 3 weeks.

  12. Energy Department Applauds World's First Fuel Cell and Hydrogen Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Station in Orange County | Department of Energy World's First Fuel Cell and Hydrogen Energy Station in Orange County Energy Department Applauds World's First Fuel Cell and Hydrogen Energy Station in Orange County August 16, 2011 - 5:28pm Addthis Washington, D.C. - The U.S. Department of Energy today issued the following statement in support of the commissioning of the world's first tri-generation fuel cell and hydrogen energy station to provide transportation fuel to the public and electric

  13. World Cancer Day 2015: Not Beyond Us | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World Cancer Day 2015: Not Beyond Us Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) World Cancer Day 2015: Not Beyond Us Mark Frontera 2015.02.05 Yesterday, Feb. 4, marked World Cancer Day, a day set aside each year to raise awareness about cancer worldwide. This year's theme, "not beyond us," speaks to the

  14. Minerals Yearbook: Minerals in the world economy. 1988 International review

    SciTech Connect

    Kimbell, C.L.; Zajac, W.L.

    1988-01-01

    In overview, 1988 appeared to be the best year for the world's mineral industry since 1980, although the all-important petroleum component suffered severely from low prices. With this notable exception, the traditional statistical measures of mineral industry performance, namely production, trade, and consumption, reflected growth in most elements of the world mineral industry from crude material extraction through the gamut of downstream processing. Moreover, the growth was reasonably well distributed geographically, with many countries sharing in the substantial upturn in activity. The report discusses production, trade, consumption, investment, transportation, prices, and statistical summary of world production and trade of major mineral commodities.

  15. Omega World Travel Awarded JLab Contract for Travel Services | Jefferson

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lab Omega World Travel Awarded JLab Contract for Travel Services Omega World Travel Awarded JLab Contract for Travel Services Effective today, ALL travel to go through Omega World Travel. The Concur On-line Travel System is up and running. You can access it now. Questions / Concerns Omega representatives will be holding informational / training sessions August 1st 3:00pm - 4:00pm and August 2nd 2:00pm - 3:00pm in the Cebaf Center Auditorium. All staff are encouraged to attend. Topics will

  16. DETECTION OF SEMIMAJOR AXIS DRIFTS IN 54 NEAR-EARTH ASTEROIDS: NEW MEASUREMENTS OF THE YARKOVSKY EFFECT

    SciTech Connect

    Nugent, C. R.; Margot, J. L.; Chesley, S. R.; Vokrouhlicky, D.

    2012-08-15

    We have identified and quantified semimajor axis drifts in near-Earth asteroids (NEAs) by performing orbital fits to optical and radar astrometry of all numbered NEAs. We focus on a subset of 54 NEAs that exhibit some of the most reliable and strongest drift rates. Our selection criteria include a Yarkovsky sensitivity metric that quantifies the detectability of semimajor axis drift in any given data set, a signal-to-noise metric, and orbital coverage requirements. In 42 cases, the observed drifts ({approx}10{sup -3} AU Myr{sup -1}) agree well with numerical estimates of Yarkovsky drifts. This agreement suggests that the Yarkovsky effect is the dominant non-gravitational process affecting these orbits, and allows us to derive constraints on asteroid physical properties. In 12 cases, the drifts exceed nominal Yarkovsky predictions, which could be due to inaccuracies in our knowledge of physical properties, faulty astrometry, or modeling errors. If these high rates cannot be ruled out by further observations or improvements in modeling, they would be indicative of the presence of an additional non-gravitational force, such as that resulting from a loss of mass of order a kilogram per second. We define the Yarkovsky efficiency f{sub Y} as the ratio of the change in orbital energy to incident solar radiation energy, and we find that typical Yarkovsky efficiencies are {approx}10{sup -5}.

  17. Summary of nuclear fuel reprocessing activities around the world

    SciTech Connect

    Mellinger, P.J.; Harmon, K.M.; Lakey, L.T.

    1984-11-01

    This review of international practices for nuclear fuel reprocessing was prepared to provide a nontechnical summary of the current status of nuclear fuel reprocessing activities around the world. The sources of information are widely varied.

  18. GATEWAY Demonstrations: Exploring SSL Product Performance in the Real World

    SciTech Connect

    2013-10-01

    Fact sheet that outlines DOE's GATEWAY technology demonstration program, which evaluates high-performance SSL products for general illumination in a variety of real-world exterior and interior applications.

  19. Green Energy World GmbH | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy World GmbH is a service provider in the field of renewable energies. As a marketing agency the company supports project developers and operators with the implementation...

  20. Oak Ridge 'Jaguar' Supercomputer is World's Fastest | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    To net the number-one spot on the TOP500 list of the world's fastest supercomputers, Jaguar's Cray XT5 component was upgraded this fall from four-core to six-core processors and ...

  1. NREL Supports Development of World's Largest Solar Electric Power...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL Supports Development of World's Largest Solar Electric Power Plant Project in 14 Years October 19, 2005 Golden, Colo. - Researchers with the U.S. Department of Energy's (DOE) ...

  2. Largest Cellulosic Ethanol Plant in the World Opened in October

    Energy.gov [DOE]

    TheDuPont cellulosic ethanol facility openedin Nevada, Iowa, last month and isthe largest cellulosic ethanol plant in the world. The U.S. Department of Energy (DOE) Bioenergy Technologies Office...

  3. Department of Energy Announces Completion of World's Largest...

    Office of Environmental Management (EM)

    ... Earlier this month, NIF became the first fusion laser in the world to break the megajoule ... a shroud around the cold target to protect it until they open five seconds before a shot. ...

  4. World Energy Projection System Plus Model Documentation: Natural Gas Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Natural Gas Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  5. World Energy Projection System Plus Model Documentation: Transportation Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) International Transportation model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  6. World Energy Projection System Plus Model Documentation: Greenhouse Gases Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Greenhouse Gases Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  7. World Energy Projection System Plus Model Documentation: Residential Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Residential Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  8. World Energy Projection System Plus Model Documentation: Coal Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Coal Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  9. World Energy Projection System Plus Model Documentation: District Heat Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) District Heat Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  10. Financial Times-World Energy Council Energy Leaders Summit |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    aggressive action to achieve, is indeed critically important. First, let's look at our heavy reliance on oil. The growth in world oil consumption has been averaging about 1.8...

  11. Language barrier broken with Multilingual WorldWideScience.org...

    Office of Scientific and Technical Information (OSTI)

    Library and the WorldWideScience Alliance Chairman; and Wu Yishan, Institute of Scientific and Technical Information of China (ISTIC) Chief Engineer Last updated on Tuesday 17 May

  12. Fusion Machines of the World | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Fusion Machines of the World NSTX-U IS ONE OF AN ELITE GROUP of magnetic fusion facilities scattered across the globe. These powerful and complex machines are advancing mankind's ...

  13. Fact #898: November 9, 2015 World Carbon Dioxide Emissions, 1990...

    Energy.gov [DOE] (indexed site)

    World Carbon Dioxide Emissions, 1990-2012 Year United States Rest of North America Central & South America Europe Eurasia Middle East Africa India China Rest of Asia & Oceania 1990 ...

  14. Fact #839: September 22, 2014 World Petroleum Consumption Continues...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    declined since 2007, this is offset by increasing consumption from the rest of the world. ... Not including the U.S., Europe, China, and India, petroleum consumption by the rest of the ...

  15. World Induced Technical Change Hybrid (WITCH) | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    main economic and environmental policies in each world region as the outcome of a dynamic game. When to Use This Tool This tool is most useful for development impacts assessments...

  16. The World's Largest Solar Project Finds a Home in California...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Solar Project Finds a Home in California The World's Largest Solar Project Finds a Home in ... That's the impact that the Blythe Solar Power Project is projected to have upon ...

  17. Shining Some Light on the World Cup's Efficiency Efforts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    fans now have more to cheer for than their favorite teams. The 2014 World Cup host, Brazil, has been working hard to make its new stadiums energy efficient. In May, Brazil...

  18. World Energy Projection System Plus Model Documentation: Commercial Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Commercial Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  19. World Energy Projection System Plus Model Documentation: Main Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Main Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  20. World Energy Projection System Plus Model Documentation: Refinery Model

    Reports and Publications

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Refinery Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  1. Future world oil supplies: There is a finite limit

    SciTech Connect

    Ivanhoe, L.F.

    1995-10-01

    The question is not whether, but when, world crude productivity will start to decline, ushering in the permanent oil shock era. While global information for predicting this ``event`` is not so straightforward as the data M. King Hubbert used in creating his famous curve that predicted the US oil production peak, there are indications that most of the large exploration targets have been found, at the same time that the world`s population is exploding. This theme and a discussion of ``reserve`` and ``resource`` definitions and use, or abuse, are the subjects of this article. Discussions and illustrations give one indication of where the world is in crude production and reserves, and where it is headed.

  2. National Contract Management Association’s 2013 World Congress

    Energy.gov [DOE]

    The National Contract Management Association (NCMA) will hold its 2013 World Congress from July 21 to July 24, 2013, in Nashville, TN. The theme for this conference is "Collaborative Contract...

  3. World War II role of Oak Ridge National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    War II role of Oak Ridge National Lab featured in second 70th anniversary lecture February ... about that laboratory's role during World War II and the shared national security mission ...

  4. World Energy Projection System Plus Model Documentation: Main Model

    Reports and Publications

    2016-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Main Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  5. World Energy Projection System Plus Model Documentation: Refinery Model

    Reports and Publications

    2016-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) Refinery Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  6. Stories of Discovery & Innovation: Scientists Create World's Smallest

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Battery | U.S. DOE Office of Science (SC) Scientists Create World's Smallest Battery Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 05.16.11 Stories of Discovery & Innovation: Scientists Create World's Smallest Battery Print Text Size: A A A Subscribe FeedbackShare Page Effort yields insights that could improve battery performance. This work, featured

  7. World's Largest Post-Combustion Carbon Capture Project Begins

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Construction | Department of Energy World's Largest Post-Combustion Carbon Capture Project Begins Construction World's Largest Post-Combustion Carbon Capture Project Begins Construction July 15, 2014 - 9:55am Addthis News Media Contact 202-586-4940 Department of Energy Supported Project Will Capture 1.4 Million Tons of CO2 Annually Washington, D.C. - Today, the Department of Energy - in partnership with NRG Energy Inc. and JX Nippon - announced that construction has begun on the first

  8. Coalition of World Energy Ministers Commit to Improvements in Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Efficiency, Renewable Energy, Energy Access | Department of Energy Coalition of World Energy Ministers Commit to Improvements in Energy Efficiency, Renewable Energy, Energy Access Coalition of World Energy Ministers Commit to Improvements in Energy Efficiency, Renewable Energy, Energy Access April 26, 2012 - 5:15am Addthis LONDON, 26 April 2012 - Leaders from the 23-government Clean Energy Ministerial (CEM) and the UN Secretary-General's Sustainable Energy for All initiative (SE4All) today

  9. World's Most Sensitive Dark Matter Detector Gets an Upgrade

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World's Most Sensitive Dark Matter Detector Gets an Upgrade World's Most Sensitive Dark Matter Detector Gets an Upgrade NERSC, Berkeley Lab Help LUX Experiment Gain Ground in Search for WIMPS December 15, 2015 Contact: Glenn Roberts Jr., geroberts@lbl.gov, 510-486-5582 LUX detector A view inside the LUX detector. Image: Matthew Kapust, Sanford Underground Research Facility The Large Underground Xenon (LUX) dark matter experiment, which operates nearly a mile underground at the Sanford

  10. World's largest single crystal of gold verified at Los Alamos

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World's largest single crystal of gold verified at Los Alamos World's largest single crystal of gold verified at Los Alamos The SCD instrument is used to determine the periodic atomic arrangement or crystal structure of single crystals, both natural and synthetic. April 7, 2014 Neutron diffraction data collected on the single-crystal diffraction (SCD) instrument at the Lujan Center, from the Venezuelan gold sample, indicate that the sample is a single crystal. Neutron diffraction data collected

  11. COOPERATION AND CONFLICT IN THE NATURAL WORLD | Princeton Plasma Physics

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lab February 4, 2012, 9:30am Science On Saturday MBG Auditorium COOPERATION AND CONFLICT IN THE NATURAL WORLD Dr. Suzanne Alonzo Dept. of Ecology & Evolutionary Biology, Yale University COOPERATION AND CONFLICT IN THE NATURAL WORLD PPPL Entrance Procedures Visitor Information, Directions, Security at PPPL As a federal facility, the Princeton Plasma Physics Laboratory is operating under heightened security measures because of the events of September 11, 2001. Upon arrival at PPPL, adult

  12. Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Underfoot | Department of Energy Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot Rooted in Wonder: Joint Genome Institute Study Reveals Amazing World Underfoot August 13, 2012 - 2:33pm Addthis By developing a better understanding of the microbes that affect the growth of other plants (crops like corn or wheat) researchers may be able to improve their growth -- or provide better care for them in times of drought. By developing a better understanding of the

  13. International Energy Outlook 2016-World energy demand and economc outlook -

    Gasoline and Diesel Fuel Update

    Energy Information Administration Analysis & Projections International Energy Outlook 2016 Release Date: May 11, 2016 | Next Release Date: September 2017 | | Report Number: DOE/EIA-0484(2016) Chapter 1. World energy demand and economic outlook print version Overview The International Energy Outlook 2016 (IEO2016) Reference case projects significant growth in worldwide energy demand over the 28-year period from 2012 to 2040. Total world consumption of marketed energy expands from 549

  14. Nuclear forensics, explained: NNSA analytic chemists help keep the world

    National Nuclear Security Administration (NNSA)

    safe | National Nuclear Security Administration | (NNSA) forensics, explained: NNSA analytic chemists help keep the world safe Thursday, February 25, 2016 - 2:46pm One of the gravest threats the world faces is the possibility that terrorists will acquire nuclear weapons or the necessary materials to construct a weapon. Part of the work of NNSA's Office of Defense Nuclear Nonproliferation and the national laboratories is to support investigations into the diversion, trafficking, or illicit

  15. Kilovoltage cone-beam CT imaging dose during breast radiotherapy: A dose comparison between a left and right breast setup

    SciTech Connect

    Quinn, Alexandra; Holloway, Lois; Begg, Jarrad; Nelson, Vinod; Metcalfe, Peter

    2014-07-01

    The purpose of this study was to investigate the delivered dose from a kilovoltage cone-beam computed tomography (kV-CBCT) acquired in breast treatment position for a left and right breast setup. The dose was measured with thermoluminescent dosimeters positioned within a female anthropomorphic phantom at organ locations. Imaging was performed on an Elekta Synergy XVI system with the phantom setup on a breast board. The image protocol involved 120 kVp, 140 mAs, and a 270 arc rotation clockwise 0 to 270 for the left breast setup and 270 to 180 for the right breast setup (maximum arc rotations possible). The dose delivered to the left breast, right breast, and heart was 5.1 mGy, 3.9 mGy, and 4.0 mGy for the left breast setup kV-CBCT, and 6.4 mGy, 6.0 mGy, and 4.8 mGy for the right breast setup kV-CBCT, respectively. The rotation arc of the kV-CBCT influenced the dose delivered, with the right breast setup kV-CBCT found to deliver a dose of up to 4 mGy or 105% higher to the treated breast?s surface in comparison with the left breast setup. This is attributed to the kV-CBCT source being more proximal to the anterior of the phantom for a right breast setup, whereas the source is more proximal to the posterior of the patient for a left-side scan.

  16. Fact #578: July 6, 2009 World Oil Reserves, Production, and Consumption,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2007 | Department of Energy 8: July 6, 2009 World Oil Reserves, Production, and Consumption, 2007 Fact #578: July 6, 2009 World Oil Reserves, Production, and Consumption, 2007 The United States was responsible for 8% of the world's petroleum production, held 2% of the world's crude oil reserves, and consumed 24% of the world's petroleum consumption in 2007. The Organization for Petroleum Exporting Countries (OPEC) held 69% of the world's crude oil reserves and produced 41% of world

  17. Bound on Z{sup '} mass from CDMS II in the dark left-right gauge model II

    SciTech Connect

    Khalil, Shaaban; Lee, Hye-Sung; Ma, Ernest

    2010-03-01

    With the recent possible signal of dark matter from the CDMS II experiment, the Z{sup '} mass of a new version of the dark left-right gauge model (DLRM II) is predicted to be at around a TeV. As such, it has an excellent discovery prognosis at the operating Large Hadron Collider.

  18. Development and Verification of a Computational Fluid Dynamics Model of a Horizontal-Axis Tidal Current Turbine

    SciTech Connect

    Lawson, M. J.; Li, Y.; Sale, D. C.

    2011-10-01

    This paper describes the development of a computational fluid dynamics (CFD) methodology to simulate the hydrodynamics of horizontal-axis tidal current turbines. Qualitative measures of the CFD solutions were independent of the grid resolution. Conversely, quantitative comparisons of the results indicated that the use of coarse computational grids results in an under prediction of the hydrodynamic forces on the turbine blade in comparison to the forces predicted using more resolved grids. For the turbine operating conditions considered in this study, the effect of the computational timestep on the CFD solution was found to be minimal, and the results from steady and transient simulations were in good agreement. Additionally, the CFD results were compared to corresponding blade element momentum method calculations and reasonable agreement was shown. Nevertheless, we expect that for other turbine operating conditions, where the flow over the blade is separated, transient simulations will be required.

  19. Design and fabrication of a low cost Darrieus vertical axis wind turbine system: Phase II. Volume 1. Executive summary

    SciTech Connect

    Not Available

    1983-03-01

    Described is the successful fabrication, installation, and checkout of 100 kW 17 metre Vertical Axis Wind Turbines (VAWTs). The turbines are Darrieus-type VAWTs with rotors 17 metres (55 feet) in diameter and 25.15 metres (83 feet) in height. They can produce 100 kW of electric power at a cost of energy as low as 3 cents per kWh, in an 18 mph wind regime using 12% annualized costs. Four turbines were produced; three are installed and are operable at: (1) Wind Systems Test Center, Rocky Flats, Colorado; (2) the US Department of Agriculture Conservation and Production Research Center at Bushland, Texas; and (3) Tisbury Water Authority, Vineyard Haven, Massachusetts, on the island of Martha's Vineyard. The fourth turbine is stored at Bushland, Texas, awaiting selection of an erection site.

  20. World Energy Resources program U. S. Geological Survey

    SciTech Connect

    Masters, C.D.

    1986-05-01

    In 1973, with the OPEC embargo, the US was jarred into the world of insecure energy supplies - a harsh reality considering that throughout much of our history we had sufficient domestic supplies of oil and gas to meet all of our requirements. The US Government's response in 1973 was to assess domestic oil and gas potential, which was found to be substantial but nonetheless short of long-term requirements. Born of the need to become more certain about foreign as well has domestic resources, and working in conjunction with the Foreign Energy Supply Assessment Program of the US Department of Energy, the US Geological Survey undertook a program to develop a technical understanding of the reserves and undiscovered recoverable resources of petroleum in every basin in the world with petroleum potential. The World Energy Resources Program prepared an assessment of ultimate resources of crude oil for the World Petroleum Congress (WPC) in 1983, and a revision and update (including nature gas, crude oil, extra heavy oil, and tar sands) are planned for WPC in 1987. This poster session attempts to engender awareness of our scenario of world ultimate petroleum occurrence and to show some elements of the geology that guided our thinking.

  1. Creating orbiting vorticity vectors in magnetic particle suspensions through field symmetry transitions–a route to multi-axis mixing

    DOE PAGES [OSTI]

    Martin, James E.; Solis, Kyle Jameson

    2015-11-09

    It has recently been reported that two types of triaxial electric or magnetic fields can drive vorticity in dielectric or magnetic particle suspensions, respectively. The first type-symmetry -- breaking rational fields -- consists of three mutually orthogonal fields, two alternating and one dc, and the second type -- rational triads -- consists of three mutually orthogonal alternating fields. In each case it can be shown through experiment and theory that the fluid vorticity vector is parallel to one of the three field components. For any given set of field frequencies this axis is invariant, but the sign and magnitude ofmore » the vorticity (at constant field strength) can be controlled by the phase angles of the alternating components and, at least for some symmetry-breaking rational fields, the direction of the dc field. In short, the locus of possible vorticity vectors is a 1-d set that is symmetric about zero and is along a field direction. In this paper we show that continuous, 3-d control of the vorticity vector is possible by progressively transitioning the field symmetry by applying a dc bias along one of the principal axes. Such biased rational triads are a combination of symmetry-breaking rational fields and rational triads. A surprising aspect of these transitions is that the locus of possible vorticity vectors for any given field bias is extremely complex, encompassing all three spatial dimensions. As a result, the evolution of a vorticity vector as the dc bias is increased is complex, with large components occurring along unexpected directions. More remarkable are the elaborate vorticity vector orbits that occur when one or more of the field frequencies are detuned. As a result, these orbits provide the basis for highly effective mixing strategies wherein the vorticity axis periodically explores a range of orientations and magnitudes.« less

  2. Creating orbiting vorticity vectors in magnetic particle suspensions through field symmetry transitions–a route to multi-axis mixing

    SciTech Connect

    Martin, James E.; Solis, Kyle Jameson

    2015-11-09

    It has recently been reported that two types of triaxial electric or magnetic fields can drive vorticity in dielectric or magnetic particle suspensions, respectively. The first type-symmetry -- breaking rational fields -- consists of three mutually orthogonal fields, two alternating and one dc, and the second type -- rational triads -- consists of three mutually orthogonal alternating fields. In each case it can be shown through experiment and theory that the fluid vorticity vector is parallel to one of the three field components. For any given set of field frequencies this axis is invariant, but the sign and magnitude of the vorticity (at constant field strength) can be controlled by the phase angles of the alternating components and, at least for some symmetry-breaking rational fields, the direction of the dc field. In short, the locus of possible vorticity vectors is a 1-d set that is symmetric about zero and is along a field direction. In this paper we show that continuous, 3-d control of the vorticity vector is possible by progressively transitioning the field symmetry by applying a dc bias along one of the principal axes. Such biased rational triads are a combination of symmetry-breaking rational fields and rational triads. A surprising aspect of these transitions is that the locus of possible vorticity vectors for any given field bias is extremely complex, encompassing all three spatial dimensions. As a result, the evolution of a vorticity vector as the dc bias is increased is complex, with large components occurring along unexpected directions. More remarkable are the elaborate vorticity vector orbits that occur when one or more of the field frequencies are detuned. As a result, these orbits provide the basis for highly effective mixing strategies wherein the vorticity axis periodically explores a range of orientations and magnitudes.

  3. Stochastic Energy Deployment System (SEDS) World Oil Model (WOM)

    SciTech Connect

    2009-08-07

    The function of the World Oil Market Model (WOMM) is to calculate a world oil price. SEDS will set start and end dates for the forecast period, and a time increment (assumed to be 1 year in the initial version). The WOMM will then randomly select an Annual Energy Outlook (AEO) oil price case and calibrate itself to that case. As it steps through each year, the WOMM will generate a stochastic supply shock to OPEC output and accept a new estimate of U.S. petroleum demand from SEDS. The WOMM will then calculate a new oil market equilibrium for the current year. The world oil price at the new equilibrium will be sent back to SEDS. When the end year is reached, the process will begin again with the selection of a new AEO forecast. Iterations over forecasts will continue until SEDS has completed all its simulation runs.

  4. Managing nuclear weapons in a changing world: Proceedings

    SciTech Connect

    Not Available

    1992-12-31

    The Center for Security and Technology Studies was established at the Lawrence Livermore National Laboratory to support long-range technical studies on issues of importance to US national security. An important goal of the Center is to bring together Laboratory staff and the broader outside community through a program of technical studies, visitors, symposia, seminars, workshops, and publications. With this in mind, the Center and LLNL`s Defense Systems Program sponsored a conference on Managing Nuclear Weapons in a Changing World held on November 17--18,1992. The first day of the meeting focused on nuclear weapons issues in the major geographical areas of the world. On the second day, the conference participants discussed what could be done to manage, control, and account for nuclear weapons in this changing world. Each of the talks and the concluding panel discussion are being indexed as separate documents.

  5. Stochastic Energy Deployment System (SEDS) World Oil Model (WOM)

    Energy Science and Technology Software Center

    2009-08-07

    The function of the World Oil Market Model (WOMM) is to calculate a world oil price. SEDS will set start and end dates for the forecast period, and a time increment (assumed to be 1 year in the initial version). The WOMM will then randomly select an Annual Energy Outlook (AEO) oil price case and calibrate itself to that case. As it steps through each year, the WOMM will generate a stochastic supply shock tomore » OPEC output and accept a new estimate of U.S. petroleum demand from SEDS. The WOMM will then calculate a new oil market equilibrium for the current year. The world oil price at the new equilibrium will be sent back to SEDS. When the end year is reached, the process will begin again with the selection of a new AEO forecast. Iterations over forecasts will continue until SEDS has completed all its simulation runs.« less

  6. Fact #746: September 24, 2012 U.S. Share of World Vehicles Declines...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Number of Vehicles in the U.S. and the World, 1990, 2000, and 2010 (Million Vehicles) Calendar Year United States Rest of the World Total World Vehicles 1990 189 394 583 2000 214 ...

  7. Real World Demonstration of a New American Low-Head Hydropower...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Real World Demonstration of a New American Low-Head Hydropower Unit Real World Demonstration of a New American Low-Head Hydropower Unit Real World Demonstration of a New American ...

  8. OSTIblog Articles in the world wide web Topic | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    world wide web Topic The Knowledge Investment Curve by Dr. Walt Warnick 19 Aug, 2009 in ... to colleague... Related Topics: knowledge, Web, world wide web, WorldWideScience.org (WWS)

  9. Inferior Pancreaticoduodenal Artery Aneurysms Associated with Occlusive Lesions of the Celiac Axis: Diagnosis, Treatment Options, Outcomes, and Review of the Literature

    SciTech Connect

    Flood, Karen Nicholson, Anthony A.

    2013-06-15

    Purpose. To describe the presentation, treatment, and outcomes for 14 patients with aneurysms of the inferior pancreaticoduodenal arteries associated with occlusive lesions of the celiac axis, and to review the literature for similar cases. Methods, Over a period of 12 years, 14 patients (10 women and 4 men) ranging in age from 26 to 50 (mean 46) years were demonstrated to have aneurysms of the inferior pancreaticoduodenal artery origin associated with stenosis or occlusion of the celiac axis. All patients were treated by a combination of surgery and interventional radiology. Results. Outcome data collected between 3 months and 4 years (mean 2 years) demonstrated that all aneurysms remained excluded, and all 14 patients were well. The 49 case reports in the literature confirm the findings of this cohort. Conclusion. In inferior pancreaticoduodenal artery aneurysm resulting from celiac occlusive disease, endovascular treatment is best achieved by stenting the celiac axis and/or embolizing the aneurysm when necessary.

  10. Society of Automotive Engineers World Congress | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Society of Automotive Engineers World Congress Society of Automotive Engineers World Congress April 6, 2006 - 10:12am Addthis Remarks Prepared for Energy Secretary Samuel Bodman Thank you, Greg. It's always a pleasure to be in a room full of engineers. As an engineer myself, I know there is nothing our profession likes better than plain talk and solving problems. So, I'm going to serve you up some plain talk and then some assignments. Our nation faces big challenges in the energy and

  11. Meet the world's highest-performance single-molecule diode

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Meet the world's highest-performance single-molecule diode Click to share on Facebook (Opens in new window) Click to share on Twitter (Opens in new window) Click to share on Reddit (Opens in new window) Click to share on Pinterest (Opens in new window) This is the world's highest-performance single-molecule diode using a combination of gold electrodes and an ionic solution. (Image: Latha Venkataraman, Columbia University) More » Solitary microbes mingle The sclerotia are in the soil! A big

  12. Air Conditioning That's Out of This World | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Air Conditioning That's Out of This World Air Conditioning That's Out of This World September 26, 2016 - 12:49pm Addthis New materials enhance the cooling effects from outer space to reduce energy use in small- to medium-sized buildings September 2016 bto_news1_092616.png This graph shows simulation data revealing the difference in radiator temperature and ambient outdoor air temperature over a two-day period in April in Las Vegas. The data reveals that the radiator surface consistently stays

  13. Q2 in the New World | Jefferson Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Q2 in the New World Q2 in the New World October 11, 2016 France and the French have been involved in this local area for a number of years. In 1781, the French Army, led by Compte de Rochambeau, helped the Continental Army of George Washington defeat the British in the Siege of/Battle of Yorktown. While my sentiments with respect to that event are mixed, I have no such equivocation with respect to Thursday's event. In the design for the 12 GeV Upgrade, there are many magnets. In Hall B, there is

  14. The Manhattan Project: Science in the Second World War

    SciTech Connect

    Gosling, F.G.

    1990-08-01

    The Manhattan Project: Science in the Second World War'' is a short history of the origins and development of the American atomic bomb program during World War II. Beginning with the scientific developments of the pre-war years, the monograph details of the role of the United States government in conducting a secret, nationwide enterprise that took science from the laboratory and into combat with an entirely new type of weapon. The monograph concludes with a discussion of the immediate postwar period, the debate over the Atomic Energy Act of 1946, and the founding of the Atomic Energy Commission.

  15. The Rugged World of Harsh Environment Sensors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Rugged World of Harsh Environment Sensors The Rugged World of Harsh Environment Sensors August 11, 2016 - 4:55pm Addthis A CO2 laser melts a rod of solid sapphire and draws a sapphire optical fiber. Sapphire has a high melting point, which can withstand the brutal conditions inside gas turbine engines and solid oxide fuel cells. | Photo courtesy of National Energy Technology Laboratory. A CO2 laser melts a rod of solid sapphire and draws a sapphire optical fiber. Sapphire has a high melting

  16. World's Most Sensitive Dark Matter Detector Completes Search

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    World oil inventories forecast to grow significantly in 2016 and 2017 Global oil inventories are expected to continue strong growth over the next two years which should keep oil prices low. In its new monthly forecast, the U.S. Energy Information Administration said world oil stocks are likely to increase by 1.6 million barrels per day this year and by 600,000 barrels per day next year. The higher forecast for inventory builds are the result of both higher global oil production and less oil

  17. World Oil Price Cases (released in AEO2005)

    Reports and Publications

    2005-01-01

    World oil prices in Annual Energy Outlook 2005 are set in an environment where the members of OPEC (Organization of the Petroleum Exporting Countries) are assumed to act as the dominant producers, with lower production costs than other supply regions or countries. Non-OPEC oil producers are assumed to behave competitively, producing as much oil as they can profitability extract at the market price for oil. As a result, the OPEC member countries will be able effectively to set the price of oil when they can act in concert by varying their aggregate production. Alternatively, OPEC members could target a fixed level of production and let the world market determine the price.

  18. World Oil Prices in AEO2006 (released in AEO2006)

    Reports and Publications

    2006-01-01

    World oil prices in the Annual Energy Outlook 2006 (AEO) reference case are substantially higher than those in the AEO2005 reference case. In the AEO2006 reference case, world crude oil prices, in terms of the average price of imported low-sulfur, light crude oil to U.S. refiners, decline from current levels to about $47 per barrel (2004 dollars) in 2014, then rise to $54 per barrel in 2025 and $57 per barrel in 2030. The price in 2025 is approximately $21 per barrel higher than the corresponding price projection in the AEO2005 reference case.

  19. Method and device for determining the position of a cutting tool relative to the rotational axis of a spindle-mounted workpiece

    DOEpatents

    Williams, Richard R.

    1982-01-01

    The present invention is directed to a method and device for determining the location of a cutting tool with respect to the rotational axis of a spindle-mounted workpiece. A vacuum cup supporting a machinable sacrifical pin is secured to the workpiece at a location where the pin will project along and encompass the rotational axis of the workpiece. The pin is then machined into a cylinder. The position of the surface of the cutting tool contacting the machine cylinder is spaced from the rotational aixs of the workpiece a distance equal to the radius of the cylinder.

  20. Scientists Create Worlds Smallest Battery | U.S. DOE Office...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Scientists Create World's Smallest Battery Stories of Discovery & Innovation Scientists Create World's Smallest Battery Enlarge Photo Image shows distortion of nanowire electrode ...