National Library of Energy BETA

Sample records for kingdom oecd europe

  1. Organisation for Economic Co-Operation and Development (OECD...

    OpenEI (Open Energy Information) [EERE & EIA]

    New Zealand, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland, Turkey, United Kingdom and United States Mission OECD brings together the governments of...

  2. Energy use and carbon emissions: Non-OECD countries

    SciTech Connect

    Not Available

    1994-12-01

    This report surveys world energy use and carbon emissions patterns, with particular emphasis on the non-OECD countries. The non OECD is important not only because it currently makes up 84% of world population, but because its energy consumption, carbon emissions, population, and grow domestic product have all been growing faster than OECD`s. This presentation has seven major sections: (1) overview of key trends in non-OECD energy use and carbon emissions since 1970; (2) Comparison and contrasting energy use and carbon emissions for five major non OEDC regions (former Soviet Union and eastern Europe, Pacific Rim including China, Latin America, other Asia; Africa; 3-7) presentation of aggregate and sectoral energy use and carbon emissions data for countries within each of the 5 regions.

  3. Clipper Windpower Europe Limited | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Clipper Windpower Europe Limited Jump to: navigation, search Name: Clipper Windpower Europe Limited Place: London, Greater London, United Kingdom Zip: SE1 7TJ Sector: Wind energy...

  4. Natsource Europe Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Natsource Europe Ltd Jump to: navigation, search Name: Natsource Europe Ltd Place: Richmond, Greater London, United Kingdom Zip: TW9 1EP Product: The European office of Natsource...

  5. Ceramic Fuel Cells Europe Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Ceramic Fuel Cells Europe Ltd Jump to: navigation, search Name: Ceramic Fuel Cells (Europe) Ltd Place: United Kingdom Product: A wholly owned subsidiary of Ceramic Fuel Cells Ltd,...

  6. OECD | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  7. Eurus Energy Europe BV | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Eurus Energy Europe BV Jump to: navigation, search Name: Eurus Energy Europe BV Place: London, United Kingdom Zip: SW1Y 4QT Sector: Wind energy Product: European arm of Japanese...

  8. Itochu Europe Plc | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe Plc Jump to: navigation, search Name: Itochu Europe Plc Place: London, Greater London, United Kingdom Zip: EC4A 3PJ Sector: Efficiency, Solar Product: European HQ of Itochu...

  9. Fact #575: June 15, 2009 Diesel Car Sales in Europe Still Over...

    Energy.gov [DOE] (indexed site)

    Western Europe Diesel Car Market Share, 1999-2008 Graph showing the Western Europe (Belgium, France, Germany, Italy, Norway, Spain, Switzerland, and United Kingdom) Diesel Car ...

  10. Organisation for Economic Co-Operation and Development (OECD...

    OpenEI (Open Energy Information) [EERE & EIA]

    OECD-Private Sector Engagement in Adaptation to Climate Change Visualization of World Energy Supply Add Tool OECD Programs Ethiopia-National Greenhouse Gas Emissions...

  11. Good Energies (United Kingdom) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energies (United Kingdom) Jump to: navigation, search Logo: Good Energies (United Kingdom) Name: Good Energies (United Kingdom) Address: 2-5 Old Bond Street Place: London, United...

  12. Kingdom Community Wind | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    search Name Kingdom Community Wind Facility Kingdom Community Wind Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Green Mountain...

  13. OECD-Private Sector Engagement in Adaptation to Climate Change...

    OpenEI (Open Energy Information) [EERE & EIA]

    Private Sector Engagement in Adaptation to Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-Private Sector Engagement in Adaptation to Climate Change...

  14. OECD-Fostering Innovation for Green Growth | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Fostering Innovation for Green Growth Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-Fostering Innovation for Green Growth AgencyCompany Organization:...

  15. Energy Use and Carbon Emissions: Non-OECD Countries

    Reports and Publications

    1994-01-01

    Presents world energy use and carbon emissions patterns, with particular emphasis on the non-OECD (Organization for Economic Cooperation and Development) countries (including the current and former centrally planned economies).

  16. Forecasting Crude Oil Spot Price Using OECD Petroleum Inventory Levels

    Reports and Publications

    2003-01-01

    This paper presents a short-term monthly forecasting model of West Texas Intermediate crude oil spot price using Organization for Economic Cooperation and Development (OECD) petroleum inventory levels.

  17. Latest findings from the OECD Rasplav Project

    SciTech Connect

    Asmolov, V.

    1997-01-01

    During the late phase of a severe accident in a light water reactor (current and future designs of BWRs, PWRs and VVERs), a significant amount of core material may relocate downward to the lower head of the reactor vessel. If molten core materials were to relocate to the lower head of the reactor pressure vessel (RPV), a molten pool consisting primarily of a mixture of ZrO{sub 2} and UO{sub 2} and some combination of a metal would form on the lower head. A solid crust of material would form around the boundaries of the pool, but internal heat generation resulting from radioactive decay of fission products would assure that most of the pool remains molten. In fact, the molten pool would undergo significant internal natural convection which would reach steady state conditions in about a few hours. Detailed understanding of all aspects of this natural convection process, in conjunction with the thermal boundary conditions imposed on the outer surface, determines the fraction of the total heat dissipation that is transferred through the upper crust to the inside of the reactor vessel by radiative heat exchange and the fraction which must be conducted through the wall of the reactor vessel lower head. This distribution is critical in determining whether and under what conditions the molten material can be cooled and retained in the reactor pressure vessel. The OECD Rasplav Project was established in 1994 as a three year program to study molten pool behavior and its interactions with structural materials in the lower head. This paper reviews the establishment of the project, its initial studies and proposed experimental testing, and the construction, preparation, and actual testing of a chamber of corium heated to well above liquid temperature.

  18. OECD Input-Output Tables | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    714271111,00.html Country: Sweden, Finland, Japan, South Korea, Argentina, Australia, China, Israel, United Kingdom, Portugal, Romania, Greece, Poland, Slovakia, Chile, India,...

  19. OECD-A Green Growth Strategy for Food and Agriculture | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    OECD-A Green Growth Strategy for Food and Agriculture Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-A Green Growth Strategy for Food and Agriculture Agency...

  20. The United Kingdom Nuclear Science Forum

    SciTech Connect

    MacMahon, Desmond; Judge, Steven; Forrest, Robin

    2005-05-24

    The United Kingdom Nuclear Science Forum effectively acts as the United Kingdom's Nuclear Data Committee. As such it is the interface between the UK nuclear data community and international nuclear data centres. This paper outlines the Forum's terms of reference and describes some of its recent activities.

  1. Dursley, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom. Registered Energy Companies in Dursley, United Kingdom Hermes Energy Services Retrieved from "http:en.openei.orgwindex.php?titleDursley,United...

  2. Nuclear Decommissioning Authority of the United Kingdom NDA ...

    OpenEI (Open Energy Information) [EERE & EIA]

    Decommissioning Authority of the United Kingdom NDA Jump to: navigation, search Name: Nuclear Decommissioning Authority of the United Kingdom (NDA) Place: Cumbria, England, United...

  3. BeyWatch (Smart Grid Project) (United Kingdom) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom) Jump to: navigation, search Project Name BeyWatch Country United Kingdom Coordinates 55.378052, -3.435973 Loading map... "minzoom":false,"mappingservice":"goog...

  4. United Kingdom Department of Energy and Climate Change (DECC...

    OpenEI (Open Energy Information) [EERE & EIA]

    Department of Energy and Climate Change (DECC) Jump to: navigation, search Logo: United Kingdom Department for Energy and Climate Change (DECC) Name: United Kingdom Department for...

  5. United Kingdom Low Carbon Transition Plan | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Low Carbon Transition Plan Jump to: navigation, search Tool Summary LAUNCH TOOL Name: United Kingdom Low Carbon Transition Plan AgencyCompany Organization: United Kingdom...

  6. OECD-A Green Growth Strategy for Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    A Green Growth Strategy for Energy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: OECD-A Green Growth Strategy for Energy AgencyCompany Organization: Organisation for...

  7. Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe Jump to: navigation, search Select a country above to navigate to that country's page. Additional Categories Countries (45) Programs (69) Tools (28) Companies (791) Back to...

  8. Ukraine: Europe`s next crisis?

    SciTech Connect

    Larrabee, F.S.

    1994-07-01

    The emergence of an independent Ukraine was one of the most important geopolitical results of the collapse of the former Soviet Union. It dramatically changed the geostrategic map of Europe, creating a critical strategic buffer between Russia and Europe, especially Eastern Europe. But two years after independence, Ukraine is in the midst of a severe political and economic crisis, and engaged in a series of elections that could have major and immediate consequences not only for Ukraine`s political future and security orientation, but for Western policy. Parliamentary elections were held in March, but runoff elections are needed for about one-quarter of the seats, and presidential elections will be held June 26.

  9. Sensitivity Analysis of OECD Benchmark Tests in BISON

    SciTech Connect

    Swiler, Laura Painton; Gamble, Kyle; Schmidt, Rodney C.; Williamson, Richard

    2015-09-01

    This report summarizes a NEAMS (Nuclear Energy Advanced Modeling and Simulation) project focused on sensitivity analysis of a fuels performance benchmark problem. The benchmark problem was defined by the Uncertainty Analysis in Modeling working group of the Nuclear Science Committee, part of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD ). The benchmark problem involv ed steady - state behavior of a fuel pin in a Pressurized Water Reactor (PWR). The problem was created in the BISON Fuels Performance code. Dakota was used to generate and analyze 300 samples of 17 input parameters defining core boundary conditions, manuf acturing tolerances , and fuel properties. There were 24 responses of interest, including fuel centerline temperatures at a variety of locations and burnup levels, fission gas released, axial elongation of the fuel pin, etc. Pearson and Spearman correlatio n coefficients and Sobol' variance - based indices were used to perform the sensitivity analysis. This report summarizes the process and presents results from this study.

  10. Determinants of automobile use and energy consumption in OECD countries

    SciTech Connect

    Schipper, L.

    1995-11-01

    Energy use is associated with environmental problems and other externalities arising from personal transportation. In this article, the author reviews trends in the use of the car and other modes of personal transportation in 10 OECD countries from 1970 to 1992. He analyzes changes in energy use for these activities and discuss underlying components of, and causes for, these changes. He compares differences between the US and the European countries studied, concluding that most of the variations arise because of differences in total transport activity and modal choice, not because of the energy efficiency of each mode. He analyzes more closely differences in activity, which is dominated by the automobile, relating automobile use to differences in fuel prices and car taxation, in patterns of mobility, in demographic patterns, and in geographical factors like land use or place of residence. He concludes with a focus on one externality of transportation, the carbon dioxide emissions from travel. He notes that these emissions are rising in all the countries studied. He suggests that policies aimed at stemming this rise must be integrated with other policies related to other problems of transportation, many of which are perceived to be more important than that of CO{sub 2} alone. 121 refs., 28 figs., 2 tabs.

  11. 1,"Kingdom Community Wind","Wind","Green Mountain Power Corp...

    Energy Information Administration (EIA) (indexed site)

    Vermont" ,"Plant","Primary energy source","Operating company","Net summer capacity (MW)" 1,"Kingdom Community Wind","Wind","Green Mountain Power Corp",65 2,"J C ...

  12. Brighton, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search Name Brighton, United Kingdom Equivalent URI DBpedia GeoNames ID 2654710 Coordinates 50.82838, -0.13947 Show Map Loading map......

  13. Norwich, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom: Energy Resources Jump to: navigation, search Equivalent URI DBpedia GeoNames ID 2641181 Coordinates 52.62783, 1.29834 Show Map Loading map......

  14. Tonbridge, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Tonbridge, United Kingdom: Energy Resources Jump to: navigation, search Name Tonbridge, England Equivalent URI DBpedia GeoNames ID 2635703 Coordinates 51.19242, 0.27532 Show...

  15. Leeds, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Leeds, United Kingdom: Energy Resources Jump to: navigation, search Equivalent URI DBpedia GeoNames ID 2644688 Coordinates The following coordinate was not recognized: 53.79648 ...

  16. Linkpoint Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Linkpoint Europe Jump to: navigation, search Name: Linkpoint Europe Place: Spain Sector: Wind energy Product: Spanish firm which consults on wind projects. References: Linkpoint...

  17. Sinatis Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sinatis Europe Jump to: navigation, search Name: Sinatis Europe Place: France Product: French project developer and distributor with customers across France and North Africa....

  18. Geysir Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Geysir Europe Jump to: navigation, search Name: Geysir Europe Place: Germany Sector: Geothermal energy Product: Germany-based European subsidiary of Geysir Green Energy focusing on...

  19. CFD validation in OECD/NEA t-junction benchmark.

    SciTech Connect

    Obabko, A. V.; Fischer, P. F.; Tautges, T. J.; Karabasov, S.; Goloviznin, V. M.; Zaytsev, M. A.; Chudanov, V. V.; Pervichko, V. A.; Aksenova, A. E.

    2011-08-23

    benchmark data. The numerical scheme has a very small scheme diffusion and is the second and the first order accurate in space and time, correspondingly. We compare and contrast simulation results for three computational fluid dynamics codes CABARET, Conv3D, and Nek5000 for the T-junction thermal striping problem that was the focus of a recent OECD/NEA blind benchmark. The corresponding codes utilize finite-difference implicit large eddy simulation (ILES), finite-volume LES on fully staggered grids, and an LES spectral element method (SEM), respectively. The simulations results are in a good agreement with experimenatl data. We present results from a study of sensitivity to computational mesh and time integration interval, and discuss the next steps in the simulation of this problem.

  20. Brighton, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    (Redirected from Brighton, UK) Jump to: navigation, search Name Brighton, United Kingdom Equivalent URI DBpedia GeoNames ID 2654710 Coordinates 50.82838, -0.13947 Show Map...

  1. Oxford, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Hide Map This article is a stub. You can help OpenEI by expanding it. Oxford is a city in the United Kingdom. Registered Research Institutions in Oxford, United...

  2. Sustainable Europe Research Institute | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe Research Institute Jump to: navigation, search Logo: Sustainable Europe Research Institute Name: Sustainable Europe Research Institute Address: Garnisongasse 721 A -1090...

  3. Stand by Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    by Europe Jump to: navigation, search Name: Stand-by Europe Place: Czech Republic Product: Czech project development and distribution company References: Stand-by Europe1 This...

  4. Free Energy Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Free Energy Europe Jump to: navigation, search Logo: Free Energy Europe Name: Free Energy Europe Place: Lens, France Sector: Solar Product: Solar electric systems Year Founded:...

  5. OECD MCCI project final report, February 28, 2006.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    -dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partitioning of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. Thus, a second key aim of the current program was to provide the necessary data to help resolve these modeling differences. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory

  6. OECD/NEA study on the economics of the long-term operation of nuclear power plants

    SciTech Connect

    Lokhov, A.; Cameron, R.

    2012-07-01

    The OECD Nuclear Energy Agency (NEA) established the Ad hoc expert group on the Economics of Long-term Operation (LTO) of Nuclear Power Plants. The primary aim of this group is to collect and analyse technical and economic data on the upgrade and lifetime extension experience in OECD countries, and to assess the likely applications for future extensions. This paper describes the key elements of the methodology of economic assessment of LTO and initial findings for selected NEA member countries. (authors)

  7. Word Pro - S11

    Energy Information Administration (EIA) (indexed site)

    5 Table 11.3 Petroleum Stocks in OECD Countries (Million Barrels) France Germany a Italy United Kingdom OECD Europe b Canada Japan South Korea United States Other OECD c OECD d 1973 Year ......................... 201 181 152 156 1,070 140 303 NA 1,008 67 2,588 1975 Year ......................... 225 187 143 165 1,154 174 375 NA 1,133 67 2,903 1980 Year ......................... 243 319 170 168 1,464 164 495 NA 1,392 72 3,587 1985 Year ......................... 139 277 156 131 1,154 112 500 13

  8. EUDEEP (Smart Grid Project) (United Kingdom) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    technical and nontechnical barriers that prevent a massive deployment of distributed energy resources (DER) in Europe. In partnership with manu facturers, research organizations,...

  9. Fuel Cell Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Name: Fuel Cell Europe Place: FrankfurtM, Germany Zip: D-60313 Product: Fuel Cell Europe was set up to promote the commercial application of fuel cell across Europe. Coordinates:...

  10. Solco Europe Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Solco Europe Ltd Place: Sao Joao da Madeira, Portugal Zip: Sao Joao da Madeira Product: Joint venture to distribute Solco products within Portugal. References: Solco Europe...

  11. Unit Energy Europe AG | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wind energy Product: Unit Energy develops and operates wind parks and hydroelectric power plants all across Europe. References: Unit Energy Europe AG1 This article is a stub....

  12. Vestas Central Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Central Europe Jump to: navigation, search Name: Vestas Central Europe Place: Husum, Germany Zip: 25813 Sector: Wind energy Product: Husum-based subsidiary of Vestas Wind...

  13. Minerals yearbook: Mineral industries of Europe and the USSR. Volume 3. 1990 international review

    SciTech Connect

    Not Available

    1990-01-01

    The section of the Minerals Yearbook reviews the minerals industries of 29 countries: the 12 nations of the European Community (Belgium, France, the Federal Republic of Germany (FRG), Italy, Greece, the Netherlands, Denmark/Greenland, Spain, Portugal, Luxembourg, The United Kingdom, and Ireland); 6 of the 7 nations of the European Free Trade Association (Sweden, Norway, Finland, Iceland, Austria, and Switzerland); Malta; the 8 Centrally Planned Economies of Eastern Europe (the German Democratic Republic (GDR), Poland, Yugoslavia, Albania, Hungary, Czechoslovakia, Romania, and Bulgaria); and the USSR.

  14. Thermilate Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    distributes an insulating paint additive which can be added to virtually any coating. References: Thermilate Europe1 This article is a stub. You can help OpenEI by...

  15. Gas Cleanup Strategies in Europe

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    HYGEAR GAS CLEANING EUROPE ELLART DE WIT ABOUT HYGEAR * Established in 2002 - 65 people - Acquired Plug Power Europe in 2009 * Products - Hydrogen Generation Systems - Biogas Cleaning systems - Fuel Cell Systems * Facilities - Catalysis and Adsorbents laboratory - 2000 m 2 System test facilities - Rapid prototyping shop - Flexible system assembly line Confidential & Proprietary NATURAL GAS CLEANING - SULFUR * Most sulfur is removed at well!! * What is in pipeline depends on source: -

  16. INL Results for Phases I and III of the OECD/NEA MHTGR-350 Benchmark

    SciTech Connect

    Gerhard Strydom; Javier Ortensi; Sonat Sen; Hans Hammer

    2013-09-01

    The Idaho National Laboratory (INL) Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Methods Core Simulation group led the construction of the Organization for Economic Cooperation and Development (OECD) Modular High Temperature Reactor (MHTGR) 350 MW benchmark for comparing and evaluating prismatic VHTR analysis codes. The benchmark is sponsored by the OECD's Nuclear Energy Agency (NEA), and the project will yield a set of reference steady-state, transient, and lattice depletion problems that can be used by the Department of Energy (DOE), the Nuclear Regulatory Commission (NRC), and vendors to assess their code suits. The Methods group is responsible for defining the benchmark specifications, leading the data collection and comparison activities, and chairing the annual technical workshops. This report summarizes the latest INL results for Phase I (steady state) and Phase III (lattice depletion) of the benchmark. The INSTANT, Pronghorn and RattleSnake codes were used for the standalone core neutronics modeling of Exercise 1, and the results obtained from these codes are compared in Section 4. Exercise 2 of Phase I requires the standalone steady-state thermal fluids modeling of the MHTGR-350 design, and the results for the systems code RELAP5-3D are discussed in Section 5. The coupled neutronics and thermal fluids steady-state solution for Exercise 3 are reported in Section 6, utilizing the newly developed Parallel and Highly Innovative Simulation for INL Code System (PHISICS)/RELAP5-3D code suit. Finally, the lattice depletion models and results obtained for Phase III are compared in Section 7. The MHTGR-350 benchmark proved to be a challenging simulation set of problems to model accurately, and even with the simplifications introduced in the benchmark specification this activity is an important step in the code-to-code verification of modern prismatic VHTR codes. A final OECD/NEA comparison report will compare the Phase I and III results

  17. Results from the OECD report on international projections of electricity generating costs

    SciTech Connect

    Paffenbarger, J.A.; Bertel, E.

    1998-07-01

    The International Energy Agency and Nuclear Energy Agency of the OECD have periodically undertaken a joint study on electricity generating costs in OECD Member countries and selected non-Member countries. This paper presents key results from the 1998 update of this study. Experts from 19 countries drawn from electric utility companies and government provided data on capital costs, operating and maintenance costs, and fuel costs from which levelized electricity generating costs (US cents/kWh) for baseload power plants were estimated in each country using a common set of economic assumptions. Light water nuclear power plants, pulverized coal plants, and natural gas-fired combined cycle gas turbines were the principal options evaluated. five and 10% discount rates, 40-year operating lifetime, and 75% annual load factor were the base assumptions, with sensitivity analyses on operating lifetime and load factor. Fuel costs and fuel escalation were provided individually by country, with a sensitivity case to evaluate costs assuming no real fuel price escalation over plant lifetimes. Of the three principal fuel/technology options, none is predominantly the cheapest option for all economic assumptions. However, fossil-fueled options are generally estimated to be the least expensive option. The study confirms that gas-fired combined cycles have improved their economic performance in most countries in recent years and are strong competitors to nuclear and coal-fired plants. Eleven out of the 18 countries with two or more options show gas-fired plants to be the cheapest option at 10% discount rate. Coal remains a strong competitor to gas when lower discount rates are used. Nuclear is the least expensive at both 5 and 10% discount rate in only two countries. Generally, with gas prices above 5 US$/GJ, nuclear plants constructed at overnight capital costs below 1 650 $/kWe have the potential to be competitive only at lower discount rates.

  18. U.S. Department of Energy Welcomes the United Kingdom as 21st Member of the

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Global Nuclear Energy Partnership | Department of Energy Welcomes the United Kingdom as 21st Member of the Global Nuclear Energy Partnership U.S. Department of Energy Welcomes the United Kingdom as 21st Member of the Global Nuclear Energy Partnership January 26, 2008 - 11:29am Addthis WASHINGTON, DC -The U.S. Department of Energy (DOE) today welcomed the United Kingdom (UK) as the Global Nuclear Energy Partnership's (GNEP) twenty-first partner. GNEP, a voluntary international partnership,

  19. MFCF in Europe and Elsewhere

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MFCF in Europe MFCF in Europe (and elsewhere (and elsewhere ... ... ) ) J. Robert Selman Illinois Institute of Technology Chicago, IL Work MCFC-PAFC R&D Palm Springs, CA Nov, 2009 Outline 1. Status of technology, players 2. Life time, performance decay, failure 3. R&D priorities 4. Fundamental research 5. Concluding remarks 1. Status of technology, players Developer Operating pressure (atm) Reforming Manifolding Module Plant size/target (kW) FCE (USA) 1.0 Internal External Single or

  20. Solar Wind Europe SL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe SL Jump to: navigation, search Name: Solar Wind Europe SL Place: Madrid, Spain Zip: 28028 Product: Spain-based distributor of Russia-made PV modules. References: Solar Wind...

  1. T O Green Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    O Green Europe Jump to: navigation, search Name: T-O Green Europe Place: Czech Republic Sector: Biomass, Solar, Wind energy Product: Czech-based JV company established by Theolia...

  2. The OECD/NEA/NSC PBMR coupled neutronics/thermal hydraulics transient benchmark: The PBMR-400 core design

    SciTech Connect

    Reitsma, F.; Ivanov, K.; Downar, T.; De Haas, H.; Gougar, H. D.

    2006-07-01

    The Pebble Bed Modular Reactor (PBMR) is a High-Temperature Gas-cooled Reactor (HTGR) concept to be built in South Africa. As part of the verification and validation program the definition and execution of code-to-code benchmark exercises are important. The Nuclear Energy Agency (NEA) of the Organisation for Economic Cooperation and Development (OECD) has accepted, through the Nuclear Science Committee (NSC), the inclusion of the Pebble-Bed Modular Reactor (PBMR) coupled neutronics/thermal hydraulics transient benchmark problem in its program. The OECD benchmark defines steady-state and transients cases, including reactivity insertion transients. It makes use of a common set of cross sections (to eliminate uncertainties between different codes) and includes specific simplifications to the design to limit the need for participants to introduce approximations in their models. In this paper the detailed specification is explained, including the test cases to be calculated and the results required from participants. (authors)

  3. Taxation of oil and gas revenues: the United Kingdom

    SciTech Connect

    Mitchell, J.

    1982-04-01

    Three factors helped make the United Kingdom (UK) upstream energy taxation what it is: (1) the physical conditions and real economies of oil and gas projects, (2) the role of oil and gas development in the UK economy up to now, and (3) the history of company and government interaction on petroleum tax and price matters, the two differing over how today's proceeds should be shared. Analysis of present tax policy shows it to be at a stage where the nation, the government, and the oil companies will separately and jointly get less from the North Sea than they could. To correct this requires a better understanding by the government of the operational prospects facing oil companies, and a better understanding by the companies of what the government is trying to do. 3 references, 2 tables.

  4. Europe's last chance to restructure

    SciTech Connect

    Tattum, L.

    1992-12-23

    Looking back over the year, there has been remarkably little sign of restructuring in the chemical industry in view of the current financial crisis in most companies. But the apparent paralysis in terms of plant closures or ownership changes may be disguising much behind-the-scenes activity. But the pain threshold of companies is proving surprisingly high. Looking at ethylene plants, Shell's Peter Kwant notes that almost half the steam crackers operating in Europe are 20 years old or more. They amount to one-third of capacity, or twice current underutilization. No steps have been taken to close any unit. Meanwhile, five producers collectively will have introduced 2 million m.t./year of extra ethylene capacity between 1991 and 1994. One factor hampering closure is that 40% of ethylene capacity in Europe is at isolated sites not connected to either the Benelux/Germany ARG pipeline or a local network such as those in the UK or France. BP Chemicals chief Bryan Sanderson raised that point at a recent Wertheim Schroder/Chemical Week/Chem Systems conference in New York, arguing that steep price falls occur in times of demand slump because of the inelastic supply curve for monster chemical plants. The industry could manage cycles better, he suggests, if rather than closing its incremental capacity, small, flexible plants were available to open and close as demand warrants, thus flattening the supply curve. In addition, following the US example - where 90% of ethylene capacity is connected to pipeline system should be available in Europe, giving companies greater flexibility to take plants on- and offline. The latter solution, of course, would not work for Europe's 18 loss-making polyethylene (PE) producers, and here straight closures or merging of businesses are the only solution.

  5. Europe

    Annual Energy Outlook

    7,900 Mongolia 3 - 3,400 Thailand 152 453 0 South Asia 396 5,802 12,900 8,211 26,913 India 361 5,476 3,800 Pakistan 23 248 9,100 Middle East and North Africa 10,986 867,463...

  6. Europe

    Annual Energy Outlook

    124 1,115 Indonesia 3 108 46 Mongolia - - 4 Thailand 1 10 5 South Asia 4 86 201 183 470 India 2 44 96 Pakistan 1 24 105 Middle East and North Africa 26 3,117 1,003 1,651 5,772...

  7. RELAP5/MOD2 assessment, OECD-LOFT small break experiment LP-SB-03

    SciTech Connect

    Guntay, S. )

    1990-04-01

    An analysis of the experimental results and post-test calculations using RELAP5/MOD2 carried out for OECD-LOFT small break experiment LP-SB-3 are presented. Experiment LP-SB-3 was conducted on March 5, 1984 in Loss-of-Fluid Test (LOFT) facility located at the Idaho National Engineering Laboratory (INEL). The experiment simulated a small cold leg break, with concurrent loss of high pressure injection system, and cooldown and recovery by feed and bleed of the steam generator secondary side and accumulator injection, respectively. The analysis was under taken as a part of a program at EIR aimed at developing experience in using the latest generation of best estimate Loss of Coolant Accident (LOCA) analysis computer codes, and to improve understanding of Small Break LOCA transients and as well as a part of a program aimed at assessing the RELAP5/MOD2 code. The latest available version (Cycle 33 to 36.1) of the code was used. The particular test selected for the analysis included several phenomena potentially relevant to any PWR plant operation in Switzerland. This report documents a short post-test analysis of the experiment emphasizing the results of additional analysis performed during the course of this task. RELAP5/MOD2 input model and results of the post-test calculation are documented. Included in the report are the results of a sensitivity analysis which show the predicted thermal-hydraulic response to a different input model. 7 refs., 55 figs., 2 tabs.

  8. OECD/NEA Ongoing activities related to the nuclear fuel cycle

    SciTech Connect

    Cornet, S.M.; McCarthy, K.; Chauvin, N.

    2013-07-01

    As part of its role in encouraging international collaboration, the OECD Nuclear Energy Agency is coordinating a series of projects related to the Nuclear Fuel Cycle. The Nuclear Science Committee (NSC) Working Party on Scientific Issues of the Nuclear Fuel Cycle (WPFC) comprises five different expert groups covering all aspects of the fuel cycle from front to back-end. Activities related to fuels, materials, physics, separation chemistry, and fuel cycles scenarios are being undertaken. By publishing state-of-the-art reports and organizing workshops, the groups are able to disseminate recent research advancements to the international community. Current activities mainly focus on advanced nuclear systems, and experts are working on analyzing results and establishing challenges associated to the adoption of new materials and fuels. By comparing different codes, the Expert Group on Advanced Fuel Cycle Scenarios is aiming at gaining further understanding of the scientific issues and specific national needs associated with the implementation of advanced fuel cycles. At the back end of the fuel cycle, separation technologies (aqueous and pyrochemical processing) are being assessed. Current and future activities comprise studies on minor actinides separation and post Fukushima studies. Regular workshops are also organized to discuss recent developments on Partitioning and Transmutation. In addition, the Nuclear Development Committee (NDC) focuses on the analysis of the economics of nuclear power across the fuel cycle in the context of changes of electricity markets, social acceptance and technological advances and assesses the availability of the nuclear fuel and infrastructure required for the deployment of existing and future nuclear power. The Expert Group on the Economics of the Back End of the Nuclear Fuel Cycle (EBENFC), in particular, is looking at assessing economic and financial issues related to the long term management of spent nuclear fuel. (authors)

  9. Exploration potential of Central Europe

    SciTech Connect

    Krueger, W.C. )

    1991-03-01

    Because of governmental changes an entire region of Central Europe has received exploration scrutiny not possible during the past 40-50 years. This entire area - Hungary, Czechoslovakia, Romania, Bulgaria, Yugoslavia, Albania, Poland, and East Germany - is tectonically related. Yugoslavia, although not under the same restrictions, is also considered in the same tectonic setting. Therefore, these countries can be expected to reflect some of the same stratigraphy, source rock, reservoir, trap and field types, and production history. Much of the region can be considered frontier while other parts mature. Production from all is about 55,000 T/D, 380,000 BO/D and 63.1 Bm{sup 3}/yr, 2,203 Bft{sup 3}/yr. Major source rocks have been identified as Tertiary-Oligocene, Miocene-Mesozoic, Triassic, Jurassic, and Cretaceous. Carboniferous coal sequences are considered source for the Permian. The East European platform and Tethyian plates are the foundation of the Central Europe states. Plate collisions during the late Mesozoic and into the Tertiary affected the Carpathian, Balkans, Dinarides, and Helenide Mountain chains. Mesozoic and Tertiary foredeep deposits have been proven productive from normal-, thrust-, and wrench-faulted anticlinal structures. Paleozoic, Mesozoic erosional remnants, and Tertiary lacustrine and deltaic stratigraphic deposits are the major productive reservoirs in the Pannonian basin. Permian shelf and reefal deposits are found in such areas as the Permian Shelf in Eastern Germany and Poland. Reefal plays may be found in Bulgaria and Romania offshore.

  10. Cardiovascular and Interventional Radiological Society of Europe...

    Office of Scientific and Technical Information (OSTI)

    Cardiovascular and Interventional Radiological Society of Europe Guidelines on Endovascular Treatment in Aortoiliac Arterial Disease Citation Details In-Document Search Title: ...

  11. Jetion Europe Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe Ltd Place: Liechtenstein Zip: FL-9490 Product: Joint venture between Chinese PV cell and module manufacturer Jetion (AIM: JHL), Andreas Gruenberg of Switzerland and Sunlynx...

  12. Europe's Energy Portal | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    for their energy-related news, key statistics and energy prices. Europe's Energy Portal business model is to provide customized energy data, statistics and surveys related to the...

  13. Intelligent Energy Europe (IEE) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Topics Finance, Market analysis, Background analysis Website http:ec.europa.euenergyint UN Region Northern Europe References IEE1 Overview "Set up by the EU...

  14. ,"Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million...

    Energy Information Administration (EIA) (indexed site)

    2016 11:48:54 AM" "Back to Contents","Data 1: Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million Cubic Feet)" "Sourcekey","NGMEPG0ERENUS-NUKMMCF"...

  15. Forecasting the northern African dust outbreak towards Europe...

    Office of Scientific and Technical Information (OSTI)

    ... Exeter (United Kingdom) Meteorological State Agency of Spain (AEMET), Barcelona (Spain) NASA Goddard Institute for Space Studies, New York (United States); Columbia Univ., New ...

  16. (OECD Expert Group meeting on reduction of capital costs of nuclear power plants, Paris, France, July 21--26, 1989): Foreign trip report

    SciTech Connect

    Hudson, C.R. II

    1989-08-09

    The OECD initiated a study of means to reduce the capital costs of nuclear power plants in the latter part of 1988. To accomplish the study, an Expert Group consisting of representatives of OECD member countries was formed. The initial meeting of the Expert Group was held in November 1988. A second meeting, documented in an ORNL trip report by this author, was held in May 1989. This meeting represents the third follow-on meeting with the primary goal of reviewing the draft report written by members of the Expert Group.

  17. Dynetek Europe GmbH | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Dynetek Europe GmbH Jump to: navigation, search Name: Dynetek Europe GmbH Place: Ratingen, Germany Zip: 40885 Product: Dynetek Industries Ltd and Dynetek Europe GmbH manufacture...

  18. ECF-Europe-Roadmap 2050 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ECF-Europe-Roadmap 2050 Jump to: navigation, search Name Europe - Roadmap 2050 AgencyCompany Organization European Climate Foundation Partner ClimateWorks Sector Energy Topics...

  19. Free Energy International Free Energy Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Free Energy Europe Jump to: navigation, search Name: Free Energy International Free Energy Europe Place: Eindhoven, Netherlands Zip: 5627 BZ Product: Manufactures amorphous...

  20. Clean Urban Transport for Europe CUTE | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Transport for Europe CUTE Jump to: navigation, search Name: Clean Urban Transport for Europe (CUTE) Place: Ulm, Germany Zip: 89077 Product: Germany-based, European Union project...

  1. Making the market right for environmentally sound energy-efficient technologies: US buildings sector successes that might work in developing countries and Eastern Europe

    SciTech Connect

    Gadgil, A.; Rosenfeld, A.H.; Price, L.

    1991-12-01

    Between 1973 and 1985, when energy prices were high, all Organization for Economic Cooperation and Development (OECD) countries improved their E/GNP by about 2.5% annually. Increased energy efficiency accounted for 2/3rds of this improvement; the remaining portion was due to structural changes in the economy. In the US, analytic and policy tools that have successfully promoted energy efficiency include integrated resource planning, energy use labels, energy use standards, ``Golden Carrot`` incentive programs, and revenue-neutral ``feebates.`` In addition, a number of low cost, environmentally sound, energy-efficient technologies, such as electronic ballasts, compact fluorescent lamps, and low-emissivity windows, have recently been developed. We discuss how many of these policies and technologies are probably exportable to developing countries and Eastern Europe, giving examples of successful starts in India, the ASEAN countries, and Brazil.

  2. Sabine Pass, LA Exports to United kingdom Liquefied Natural Gas (Million

    Energy Information Administration (EIA) (indexed site)

    Cubic Feet) United kingdom Liquefied Natural Gas (Million Cubic Feet) Sabine Pass, LA Exports to United kingdom Liquefied Natural Gas (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2011 2,862 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 10/31/2016 Next Release Date: 11/30/2016 Referring Pages: U.S. Liquefied Natural Gas Exports by Point of Exit Sabine Pass, LA Liquefied

  3. Analysis of the OECD/NRC BWR Turbine Trip Benchmark by the Coupled-Code System ATHLET-QUABOX/CUBBOX

    SciTech Connect

    Langenbuch, S.; Schmidt, K.-D.; Velkov, K.

    2004-10-15

    The OECD/NRC boiling water reactor (BWR) turbine trip benchmark has been calculated by the coupled thermal-hydraulic neutronics system code ATHLET-QUABOX/CUBBOX developed by Gesellschaft fuer Anlagen- und Reaktorsicherheit. The results obtained for all three exercises and for the additional four hypothetical cases are presented. The physical phenomena determining the BWR pressure transient are studied and explained. The sensitivity of results to variations of the initial steady-state conditions and of parameters of the two-phase flow model is discussed. A comparison is also performed for exercise 2 between the reactor core model with 33 thermal-hydraulic channels (THCs) as specified and a reactor core model with 764 THCs using a 1:1 mapping scheme.

  4. OECD/MCCI 2-D Core Concrete Interaction (CCI) tests : final report February 28, 2006.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    reactor material database for dry cavity conditions is solely one-dimensional. Although the MACE Scoping Test was carried out with a two-dimensional concrete cavity, the interaction was flooded soon after ablation was initiated to investigate debris coolability. Moreover, due to the scoping nature of this test, the apparatus was minimally instrumented and therefore the results are of limited value from the code validation viewpoint. Aside from the MACE program, the COTELS test series also investigated 2-D CCI under flooded cavity conditions. However, the input power density for these tests was quite high relative to the prototypic case. Finally, the BETA test series provided valuable data on 2-D core concrete interaction under dry cavity conditions, but these tests focused on investigating the interaction of the metallic (steel) phase with concrete. Due to these limitations, there is significant uncertainty in the partition of energy dissipated for the ablation of concrete in the lateral and axial directions under dry cavity conditions for the case of a core oxide melt. Accurate knowledge of this 'power split' is important in the evaluation of the consequences of an ex-vessel severe accident; e.g., lateral erosion can undermine containment structures, while axial erosion can penetrate the basemat, leading to ground contamination and/or possible containment bypass. As a result of this uncertainty, there are still substantial differences among computer codes in the prediction of 2-D cavity erosion behavior under both wet and dry cavity conditions. In light of the above issues, the OECD-sponsored Melt Coolability and Concrete Interaction (MCCI) program was initiated at Argonne National Laboratory. The project conducted reactor materials experiments and associated analysis to achieve the following technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focused on providing both confirmatory evidence and test data for the coolability

  5. Word Pro - S11

    Energy Information Administration (EIA) (indexed site)

    3 Table 11.2 Petroleum Consumption in OECD Countries (Thousand Barrels per Day) France Germany a Italy United Kingdom OECD Europe b Canada Japan South Korea United States Other OECD c OECD d World 1973 Average .................... 2,601 3,324 2,068 2,341 15,879 1,729 4,949 281 17,308 1,768 41,913 57,237 1975 Average .................... 2,252 2,957 1,855 1,911 14,314 1,779 4,621 311 16,322 1,885 39,232 56,198 1980 Average .................... 2,256 3,082 1,934 1,725 14,995 1,873 4,960 537 17,056

  6. Large wind turbine development in Europe

    SciTech Connect

    Zervos, A.

    1996-12-31

    During the last few years we have witnessed in Europe the development of a new generation of wind turbines ranging from 1000-1500 kW size. They are presently being tested and they are scheduled to reach the market in late 1996 early 1997. The European Commission has played a key role by funding the research leading to the development of these turbines. The most visible initiative at present is the WEGA program - the development, together with Europe`s leading wind industry players of a new generation of turbines in the MW range. By the year 1997 different European manufacturers will have introduced almost a dozen new MW machine types to the international market, half of them rated at 1.5 MW. 3 refs., 3 tabs.

  7. Westinghouse sees potential in East Europe

    SciTech Connect

    Lane, E.

    1993-07-09

    Westinghouse Electric Corp. is laying the groundwork for future nuclear fuel sales and construction and repair contracts in Eastern Europe and Ukraine by helping to finish the Russian-designed 1,000 megawatt VVER Temelin nuclear power plant in the former Czechoslovakia. Using the skills learned there, the company hopes to tap into the potentially lucrative market in Ukraine.

  8. Summary of important results and SCDAP/RELAP5 analysis for OECD LOFT experiment LP-FP-2

    SciTech Connect

    Coryell, E.W.

    1994-04-01

    This report summarizes significant technical findings from the LP-FP-2 Experiment sponsored by the Organization of Economic Cooperation and Development (OECD). It was the second, and final, fission product experiment conducted in the Loss-of-Fluid Test (LOFT) facility at the Idaho National Engineering Laboratory. The overall technical objective of the test was to contribute to the understanding of fuel rod behavior, hydrogen generation, and fission product release, transport, and deposition during a V-sequence accident scenario that resulted in severe core damage. An 11 by 11 test bundle, comprised of 100 prepressurized fuel rods, 11 control rods, and 10 instrumented guide tubes, was surrounded by an insulating shroud and contained in a specially designed central fuel module, that was inserted into the LOFT reactor. The simulated transient was a V-sequence loss-of-coolant accident scenario featuring a pipe break in the low pressure injection system line attached to the hot leg of the LOFT broken loop piping. The transient was terminated by reflood of the reactor vessel when the outer wall shroud temperature reached 1517 K. With sustained fission power and heat from oxidation and metal-water reactions, elevated temperatures resulted in zircaloy melting, fuel liquefaction, material relocation, and the release of hydrogen, aerosols, and fission products. A description and evaluation of the major phenomena, based upon the response of on line instrumentation, analysis of fission product data, postirradiation examination of the fuel bundle, and calculations using the SCDAP/RELAP5 computer code, are presented.

  9. RELAP5-3D Results for Phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW Benchmark

    SciTech Connect

    Gerhard Strydom

    2012-06-01

    The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2.

  10. RELAP5-3D results for phase I (Exercise 2) of the OECD/NEA MHTGR-350 MW benchmark

    SciTech Connect

    Strydom, G.; Epiney, A. S.

    2012-07-01

    The coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been initiated at the Idaho National Laboratory (INL) to provide a fully coupled prismatic Very High Temperature Reactor (VHTR) system modeling capability as part of the NGNP methods development program. The PHISICS code consists of three modules: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. As part of the verification and validation activities, steady state results have been obtained for Exercise 2 of Phase I of the newly-defined OECD/NEA MHTGR-350 MW Benchmark. This exercise requires participants to calculate a steady-state solution for an End of Equilibrium Cycle 350 MW Modular High Temperature Reactor (MHTGR), using the provided geometry, material, and coolant bypass flow description. The paper provides an overview of the MHTGR Benchmark and presents typical steady state results (e.g. solid and gas temperatures, thermal conductivities) for Phase I Exercise 2. Preliminary results are also provided for the early test phase of Exercise 3 using a two-group cross-section library and the Relap5-3D model developed for Exercise 2. (authors)

  11. Changing Global Petroleum Product Trade Flows

    Energy Information Administration (EIA) (indexed site)

    Other Asia China OECD Europe 1.6 (-0.2) 1.3 (+0.6) OECD Asia Oceania 3 0.5 (-0.0) 0.7 ... OECD North America OECD Europe OECD Pacific FSU China Other Asia Latin America Middl e ...

  12. Liquefied U.S. Natural Gas Exports to United Kingdom (Million Cubic Feet)

    Energy Information Administration (EIA) (indexed site)

    Kingdom (Million Cubic Feet) Liquefied U.S. Natural Gas Exports to United Kingdom (Million Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2010 0 0 0 0 0 0 0 0 0 0 3,379 6,206 2011 2,862 0 0 0 0 0 0 0 0 0 0 0 2013 0 0 0 0 0 0 0 0 0 0 0 0 2014 0 2015 0 0 0 0 0 0 0 0 0 0 0 0 2016 0 0 0 0 0 0 0 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date: 10/31/2016 Next Release Date: 11/30/2016 Referring

  13. Sharp Electronics Europe GmbH | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe GmbH Jump to: navigation, search Name: Sharp Electronics (Europe) GmbH Place: Hamburg, Germany Zip: 20097 Sector: Solar Product: German-based company Sharp Electronics GmbH...

  14. Dow Corning Europe S A | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Corning Europe S A Jump to: navigation, search Name: Dow Corning Europe S.A. Place: Seneffe, Belgium Zip: 7180 Product: Seneffe is the headquarters for Dow Corning's operations in...

  15. Kuraray Europe GmbH Division TROSIFOL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe GmbH Division TROSIFOL Jump to: navigation, search Name: Kuraray Europe GmbH (Division TROSIFOL) Place: Troisdorf, North Rhine-Westphalia, Germany Zip: 53840 Product: Maker...

  16. Europe China Clean Energy Centre | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Europe China Clean Energy Centre Jump to: navigation, search Name: Europe-China Clean Energy Centre Place: Beijing Municipality, China Product: Beijing-based China-EU clean energy...

  17. GE Innovation and Manufacturing in Europe | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Innovation and Manufacturing in Europe Click to email this to a friend (Opens in new ... GE Innovation and Manufacturing in Europe Click the image below to see how GE is at work ...

  18. EA-1123: Transfer of Normal and Low-Enriched Uranium Billets to the United Kingdom, Hanford Site, Richland, Washington

    Office of Energy Efficiency and Renewable Energy (EERE)

    This EA evaluates the environmental impacts of the proposal to transfer approximately 710,000 kilograms (1,562,000 pounds) of unneeded normal and low-enriched uranium to the United Kingdom; thus,...

  19. High resolution climate simulation over Europe

    SciTech Connect

    Deque, M.; Piedelievre, J.Ph.

    1995-08-01

    Three AMIP-type 10 year simulations have been performed with climate versions of the AR-PEGE-IFS model in order to simulate the European climate. The first one uses the standard T42 truncation. The second one uses a high resolution T106 truncation. The horizontal resolution of the third one varies between about T200 over Europe and T21 over the southern Pacific. The winter time general circulation improves in the Atlantic sector as the resolution increases. This is true for the time-mean pattern and for the transient and low-frequency variability. In summer time and in the southern hemisphere, the 3 versions of the model produce reasonable climatologies. When restricted to the European continent, the model verification against the observed climatology shows a reduction of the biases in temperature and, to a lesser extent, in precipitation with the increase in resolution. The use of a variable resolution GCM is a valid alternative to model nesting. The model is too warm in winter and too cold in summer, too wet in northern Europe and too dry in southern Europe. 33 refs., 16 figs., 6 tabs.

  20. Sixteen Years of International Co-operation. The OECD/NEA Co-operative Programme on Decommissioning

    SciTech Connect

    Menon, S.; Valencia, L.

    2002-02-25

    The Co-operative Programme on Decommissioning under the administration of the Radioactive Waste Management Committee of the OECD Nuclear Energy Agency (NEA) has recently completed sixteen years of operation. The Programme, which is essentially an information exchange programme between decommissioning projects, came into being in 1985. It has grown from an initial 10 decommissioning projects from 7 countries to 39 projects from 14 countries today. From purely information exchange to start with, the Programme has, in later years, been functioning as a voice for the collective expression of views of the implementers of nuclear decommissioning. During the first sixteen years of the operation of the Co-operative Programme, nuclear decommissioning has grown from local specialist activities within projects to a competitive commercial industry. By the dismantling and release from regulatory control of over a dozen diverse nuclear facilities, the Programme has been able to demonstrate in practice, that nuclear decommissioning can be performed safely both for the workers and the public, and that this can be done at reasonable costs in an environmentally friendly fashion. During the recent years, discussions and work within the Co-operative Programme, specially within some of the Task Groups, have had/are having effects and repercussions not just in the field of nuclear decommissioning, but can possibly affect activities and regulations in other industries. This paper describes how the Programme and its activities and procedures have evolved over the years and indicate the directions of developments in the organization and execution of decommissioning projects. Finally, it gives a brief overview of the achievements of the Cooperative Programme and visualizes future developments in the field of nuclear decommissioning.

  1. KINGDOM BY DTlE ATOMIC UNITED ESERG Y,AljTHORK'Y

    Office of Legacy Management (LM)

    RECE I v E 0 KINGDOM BY DTlE ATOMIC UNITED ESERG Y,AljTHORK'Y AWRE 'REPGRT Some Seismic Results of the US GASGUGGY and RULISON Underground Nuclcai Explosions a J. Corbishley D. -PROPERTV OF * U. S. GOVERNMENT . . ORDER FROM - . . - - - I - 1 @ UNITED KlNGOGFi ATOMIC: CNERGY AUTkOF;I'TY-!S70 Enquiries about copyright and rep:odlrcmn should be acdresjcd to :he Head of Technical Services, A.W.R.E., Aldtrrnaj:on, Berkshire, Eng!.'-nd. I J i . .. , .. . -. - . . . . . - - A - .. - . A _ _ 6 United

  2. Animal manure digestion systems in central Europe

    SciTech Connect

    Koeberle, E.

    1996-01-01

    This work provides an overview of existing plants in Europe and describes the substrates being used. It focuses on the individual farm-scale and community plants, as these are the two main types now being built. It also describes plants currently under construction, especially in Germany and Denmark, where the major efforts are focused. A description of how the technique has developed over the past few years, its current state of development, the motivation and economic balance, and the substrate characteristics, is presented.

  3. Slow and not so sure: Europe`s long march to electricity market liberalization

    SciTech Connect

    Hancher, L.

    1997-11-01

    Under Europe`s recent Directive on competition in electricity, Member States retain immense autonomy to set the competitive agenda within their borders. The result may well be a distinctly skewed - and far from open - trade in electricity, and little opportunity for even large customers to make a meaningful choice of suppliers. The final adoption last year by The European Council - effectively the legislative body of the European Community - of a regulatory measure requiring gradual liberalization of Europe`s electricity market is an event of more symbolic than real significance. During the seven years it has taken to negotiate and compromise upon a suitable legal framework for electricity market liberalization, the European market itself has moved on. Effective implementation of the newly adopted framework rules is unlikely to be a real catalyst for change in its own right, although it could still be an important force in shaping the direction of liberalization programs already underway at the national level. This article will examine the state of electricity market liberalization in what is now known as the European Union - the loose quasi-federal structure which subsists between the 15 Member States of the European Community (EC). It will focus in part upon the provisions of the new EC Directive on the creation of a single market for electricity, and in part upon the complex changes which are gradually transforming the European electricity market.

  4. Membrane Development for Medium and High Temperature PEMFC in Europe

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (Presentation) | Department of Energy Development for Medium and High Temperature PEMFC in Europe (Presentation) Membrane Development for Medium and High Temperature PEMFC in Europe (Presentation) Presented at the High Temperature Membrane Working Group Meeting (HTMWG) held October 10, 2007 in Washington, D.C. htwmg_oct07_jones.pdf (3.12 MB) More Documents & Publications CARISMA: A Networking Project for High Temperature PEMFC MEA Activities in Europe Minutes of the High Temperature

  5. Energy Outlook in Eastern Europe and Central Asia Region | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Central Asia, "Western & Eastern Europe" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean,...

  6. UNECE-Annual Bulletin of Transport Statistics for Europe and...

    OpenEI (Open Energy Information) [EERE & EIA]

    Data covers Europe, Canada and the United States. This is a trilingual publication in English, French and Russian." "This annual publication presents statistics and brief studies...

  7. OECD/NRC BWR Turbine Trip Transient Benchmark as a Basis for Comprehensive Qualification and Studying Best-Estimate Coupled Codes

    SciTech Connect

    Ivanov, Kostadin; Olson, Andy; Sartori, Enrico

    2004-10-15

    An Organisation for Economic Co-operation and Development (OECD)/U.S. Nuclear Regulatory Commission (NRC)-sponsored coupled-code benchmark has been initiated for a boiling water reactor (BWR) turbine trip (TT) transient. Turbine trip transients in a BWR are pressurization events in which the coupling between core space-dependent neutronic phenomena and system dynamics plays an important role. In addition, the available real plant experimental data make this benchmark problem very valuable. Over the course of defining and coordinating the BWR TT benchmark, a systematic approach has been established to validate best-estimate coupled codes. This approach employs a multilevel methodology that not only allows for a consistent and comprehensive validation process but also contributes to the study of different numerical and computational aspects of coupled best-estimate simulations. This paper provides an overview of the OECD/NRC BWR TT benchmark activities with emphasis on the discussion of the numerical and computational aspects of the benchmark.

  8. ,"Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million Cubic Feet)"

    Energy Information Administration (EIA) (indexed site)

    United Kingdom (Million Cubic Feet)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million Cubic Feet)",1,"Monthly","8/2016" ,"Release Date:","10/31/2016" ,"Next Release Date:","11/30/2016" ,"Excel File

  9. Hazardous wastes in Eastern and Central Europe

    SciTech Connect

    Carpenter, D.O.; Suk, W.A.; Blaha, K.; Cikrt, M.

    1996-03-01

    The countries of Eastern and Central Europe have emerged from a political system which for decades has ignored protection of human health from hazardous wastes. While the economies of the countries in this region are stretched, awareness and concern about hazardous waste issues are a part of the new realities. At a recent conference sponsored in part by the National Institute of Environmental Health Sciences, representatives of seven countries in the region described the status of hazardous waste programs, issues of major concern, and steps being taken to protect human health. This report summarizes the deliberations, outlines some of the problems remaining in dealing with the legacy of the past, addressing the problems of the present, and providing a framework for future research and collaborative efforts. 30 refs., 1 tab.

  10. Unmanned boiler operation a reality in Europe

    SciTech Connect

    Ilg, E.

    1996-08-01

    With the rise in liquid level technology in Europe comes new standards for boiler operation. SMART technology for level probes and auxiliary equipment, means many European countries allow a boiler to operate completely unmanned (without operators) for up to 72 hours at a time. It is not just a level control system, but a total boiler control scheme. This incorporates level control, continuous TDS monitoring with blowdown, automatic timed bottom blowdown, feed water control, contamination detection systems for monitoring of incoming feed water, monitoring of exhaust stack temperatures, over pressure alarms and timed automatic blowdown of level pots. One of the main reasons for the development of the SMART equipment and the new boiler codes was to increase reliability of boiler operation. Surveys in Germany and England showed that almost 90 percent of boiler failures was due to operator error, this has almost been eliminated through the use of new equipment based on the new codes.

  11. The success of cogeneration in Europe

    SciTech Connect

    Hunschofsky, H.

    1998-10-01

    The European engineers take a different approach to designing cogeneration plants. Instead of building large gas turbines or combined cycle plants whose main target is to produce electricity and then trying to utilize as much heat as possible, European engineers target the replacement of the base heat supply of certain, small scale entities. By focusing on the annual heat demand graph, the basic layout for maximum utilization is determined. If a plant can use all or a majority of the electricity, the by-product, produced in this combined process, the perfect requirements are a given. Today cogeneration is one of the prime technologies available to achieve two valuable goals: efficient usage of limited resources and air pollution reduction. In every major European country there is a non-profit organization promoting the usage of cogeneration and acting as a platform for the various interests involved. These national institutions are members of Cogen Europe, a non-profit organization based in Brussels, Belgium, whose main focus is to promote cogeneration to a multinational level.

  12. Eastern Europe: the move is towards gas

    SciTech Connect

    Not Available

    1980-08-15

    Individual country reports on drilling, oil and gas production, and petroleum exploration and reserves are given for E. Europe. In the USSR, the center of oil production (once in the Volga-Urals) has shifted to W. Siberia, which will account for 52% of the 1980 output. Exploratory drilling prospects are outlined in W. Siberia, including smaller structural closures within troughs, nonstructural traps, and the deeper Jurassic of the Dydan Peninsula. Over one-half of the 42.6 million ft of development drilling in 1979 was in W. Siberia, including some secondary recovery techniques. Offshore activities show only moderate growth. In Romania, there is an oil/gas self-sufficiency program in effect with plans to intensify geologic research and to develop enhanced recovery methods. Yugoslavia's gas production is expected to increase from a present level of 193.5 mmcfd on shore by year's end, and 2 offshore fields should begin producing up to 290.3 mmcfd by 1985. Petroleum industry activity and production expectations also are briefly discussed for Poland, Bulgaria, Hungary, East Germany, Albania, and Czechoslovakia.

  13. Annual bulletin of coal statistics for Europe-1983. [Europe, Canada, USA, USSR

    SciTech Connect

    Not Available

    1985-01-01

    This is a series of statistical tables documenting the production, trade, and consumption of coal in Europe, Canada, the United States, and the Soviet Union. Balance sheets of solid forms of energy are provided for hard coal, patent fuel, and coke; and for brown coal, brown coal briquettes, and brown coal coke. Data are provided on hard coal mines and on brown coal mines for production, employment and productivity of labor. Other tables list imports of solid fuels by country, exports of solid fuels by country, and world production of solid fuels.

  14. SanRex Europe GmbH | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    electronic components manufacturer. The firm produces solar PV junction boxes and inverters. References: SanRex Europe GmbH1 This article is a stub. You can help OpenEI by...

  15. Novera Energy Europe Ltd NEEL | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    as well as Mynydd Clogau wind farm in Wales. Absorbed by NMRE and later Novera Energy Plc. References: Novera Energy Europe Ltd (NEEL)1 This article is a stub. You can help...

  16. MFCF in Europe and Elsewhere | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MFCF in Europe and Elsewhere MFCF in Europe and Elsewhere Presentation at the MCFC and PAFC R&D Workshop held Nov. 16, 2009, in Palm Springs, CA mcfc_pafc_workshop_selman.pdf (841.36 KB) More Documents & Publications MCFC and PAFC R&D Workshop Summary Report Molten Carbonate and Phosphoric Acid Stationary Fuel Cells: Overview and Gap Analysis PBI-Phosphoric Acid Based Membrane Electrode Assemblies: Status Update

  17. Comparison of the PHISICS/RELAP5-3D ring and block model results for phase I of the OECD/NEA MHTGR-350 benchmark

    DOE PAGES [OSTI]

    Strydom, G.; Epiney, A. S.; Alfonsi, Andrea; Rabiti, Cristian

    2015-12-02

    The PHISICS code system has been under development at INL since 2010. It consists of several modules providing improved coupled core simulation capability: INSTANT (3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and modules performing criticality searches, fuel shuffling and generalized perturbation. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D was finalized in 2013, and as part of the verification and validation effort the first phase of the OECD/NEA MHTGR-350 Benchmark has now been completed. The theoretical basis and latest development status of the coupled PHISICS/RELAP5-3D tool are described in more detailmore » in a concurrent paper. This paper provides an overview of the OECD/NEA MHTGR-350 Benchmark and presents the results of Exercises 2 and 3 defined for Phase I. Exercise 2 required the modelling of a stand-alone thermal fluids solution at End of Equilibrium Cycle for the Modular High Temperature Reactor (MHTGR). The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 required a coupled neutronics and thermal fluids solution, and the PHISICS/RELAP5-3D code suite was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of results obtained with the traditional RELAP5-3D “ring” model approach against a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity that can be obtained by this “block” model is illustrated with comparison results on the temperature, power density and flux distributions. Furthermore, it is shown that the ring model leads to significantly lower fuel temperatures (up to 10%) when compared with the higher fidelity block model, and that the additional model development and run-time efforts are worth the gains obtained

  18. Comparison of the PHISICS/RELAP5-3D ring and block model results for phase I of the OECD/NEA MHTGR-350 benchmark

    SciTech Connect

    Strydom, G.; Epiney, A. S.; Alfonsi, Andrea; Rabiti, Cristian

    2015-12-02

    The PHISICS code system has been under development at INL since 2010. It consists of several modules providing improved coupled core simulation capability: INSTANT (3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and modules performing criticality searches, fuel shuffling and generalized perturbation. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D was finalized in 2013, and as part of the verification and validation effort the first phase of the OECD/NEA MHTGR-350 Benchmark has now been completed. The theoretical basis and latest development status of the coupled PHISICS/RELAP5-3D tool are described in more detail in a concurrent paper. This paper provides an overview of the OECD/NEA MHTGR-350 Benchmark and presents the results of Exercises 2 and 3 defined for Phase I. Exercise 2 required the modelling of a stand-alone thermal fluids solution at End of Equilibrium Cycle for the Modular High Temperature Reactor (MHTGR). The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 required a coupled neutronics and thermal fluids solution, and the PHISICS/RELAP5-3D code suite was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of results obtained with the traditional RELAP5-3D “ring” model approach against a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity that can be obtained by this “block” model is illustrated with comparison results on the temperature, power density and flux distributions. Furthermore, it is shown that the ring model leads to significantly lower fuel temperatures (up to 10%) when compared with the higher fidelity block model, and that the additional model development and run-time efforts are worth the gains obtained in the

  19. Summary of comparison and analysis of results from exercises 1 and 2 of the OECD PBMR coupled neutronics/thermal hydraulics transient benchmark

    SciTech Connect

    Mkhabela, P.; Han, J.; Tyobeka, B.; Ivanov, K.; Reitsma, F.; Sartori, E.

    2006-07-01

    The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has accepted, through the Nuclear Science Committee (NSC), the inclusion of the Pebble-Bed Modular Reactor 400 MW design (PBMR-400) coupled neutronics/thermal hydraulics transient benchmark problem as part of their official activities. The scope of the benchmark is to establish a well-defined problem, based on a common given library of cross sections, to compare methods and tools in core simulation and thermal hydraulics analysis with a specific focus on transient events through a set of multi-dimensional computational test problems. The benchmark includes three steady state exercises and six transient exercises. This paper describes the first two steady state exercises, their objectives and the international participation in terms of organization, country and computer code utilized. This description is followed by a comparison and analysis of the participants' results submitted for these two exercises. The comparison of results from different codes allows for an assessment of the sensitivity of a result to the method employed and can thus help to focus the development efforts on the most critical areas. The two first exercises also allow for removing of user-related modeling errors and prepare core neutronics and thermal-hydraulics models of the different codes for the rest of the exercises in the benchmark. (authors)

  20. The CFE Treaty and changed conditions in Europe

    SciTech Connect

    Allentuck, J.

    1994-08-01

    The Treaty on Conventional Forces in Europe (CFE) was signed in November 1990 by sixteen nations, members of the North Atlantic Treaty Organization (NATO), and six nations, members of the Warsaw Treaty Organization (WTO). It was resigned to prevent a major surprise attack in Europe by the conventional forces of one Treaty Organization against those of the other and was the first major arms control treaty to address conventional weapons. This paper focuses on how CFE adapted to changes in the military-political situation in Europe which occurred after 1990 and failed to adapt to others. Suggestions are offered on how it might be changed to make it more relevant under these changed conditions.

  1. Energy & Financial Markets - Crudeoil - U.S. Energy Information

    Gasoline and Diesel Fuel Update

    Administration (EIA) OECD The Organization of Economic Cooperation and Development (OECD) consists of the United States, much of Europe, and other advanced countries. At 53 percent of world oil consumption in 2010, these large economies consume more oil than the non-OECD countries, but have much lower oil consumption growth. Oil consumption in the OECD countries actually declined in the decade between 2000 and 2010, whereas non-OECD consumption rose 40 percent during the same period. In OECD

  2. Environmental assessment: Transfer of normal and low-enriched uranium billets to the United Kingdom, Hanford Site, Richland, Washington

    SciTech Connect

    1995-11-01

    Under the auspices of an agreement between the U.S. and the United Kingdom, the U.S. Department of Energy (DOE) has an opportunity to transfer approximately 710,000 kilograms (1,562,000 pounds) of unneeded normal and low-enriched uranium (LEU) to the United Kingdom; thus, reducing long-term surveillance and maintenance burdens at the Hanford Site. The material, in the form of billets, is controlled by DOE`s Defense Programs, and is presently stored as surplus material in the 300 Area of the Hanford Site. The United Kingdom has expressed a need for the billets. The surplus uranium billets are currently stored in wooden shipping containers in secured facilities in the 300 Area at the Hanford Site (the 303-B and 303-G storage facilities). There are 482 billets at an enrichment level (based on uranium-235 content) of 0.71 weight-percent. This enrichment level is normal uranium; that is, uranium having 0.711 as the percentage by weight of uranium-235 as occurring in nature. There are 3,242 billets at an enrichment level of 0.95 weight-percent (i.e., low-enriched uranium). This inventory represents a total of approximately 532 curies. The facilities are routinely monitored. The dose rate on contact of a uranium billet is approximately 8 millirem per hour. The dose rate on contact of a wooden shipping container containing 4 billets is approximately 4 millirem per hour. The dose rate at the exterior of the storage facilities is indistinguishable from background levels.

  3. Black carbon emissions in the United Kingdom during the past four decades: An empirical analysis

    SciTech Connect

    Novakov, T.; Hansen, J.E.

    2004-04-22

    We use data from a unique 40-year record of 150 urban and rural stations in the ''Black Smoke and SO2 Network'' in Great Britain to infer information about sources of atmospheric black carbon (BC). The data show a rapid decline of ambient atmospheric BC between 1962 and the early 1990s that exceeds the decline in official estimates of BC emissions based only on amount of fuel use and mostly fixed emission factors. This provides empirical confirmation of the existence and large impact of a time-dependent ''technology factor'' that must multiply the rate of fossil fuel use. Current ambient BC amounts in Great Britain comparable to those in western and central Europe, with diesel engines being the principal present source. From comparison of BC and SO2 data we infer that current BC emission inventories understate true emissions in the U.K. by about a factor of two. The results imply that there is the potential for improved technology to achieve large reduction of global ambient BC. There is a need for comparable monitoring of BC in other countries.

  4. Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

    SciTech Connect

    Bragg-Sitton, Shannon Michelle

    2015-09-01

    The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, parametric studies, and selection of system codes. The Cladding and Core Materials and Fuel Concepts task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment Task Force is chaired by Shannon Bragg-Sitton (INL), while the Cladding Task Force will be chaired by a representative from France (Marie Moatti, Electricite de France [EdF]) and the Fuels Task Force will be chaired by a representative from Japan (Masaki Kurata, Japan Atomic Energy Agency [JAEA]). This report provides an overview of the Systems Assessment Task Force charter and status of work accomplishment.

  5. Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD MHTGR-350 Benchmark

    SciTech Connect

    Gerhard Strydom

    2014-04-01

    The INL PHISICS code system consists of three modules providing improved core simulation capability: INSTANT (performing 3D nodal transport core calculations), MRTAU (depletion and decay heat generation) and a perturbation/mixer module. Coupling of the PHISICS code suite to the thermal hydraulics system code RELAP5-3D has recently been finalized, and as part of the code verification and validation program the exercises defined for Phase I of the OECD/NEA MHTGR 350 MW Benchmark were completed. This paper provides an overview of the MHTGR Benchmark, and presents selected results of the three steady state exercises 1-3 defined for Phase I. For Exercise 1, a stand-alone steady-state neutronics solution for an End of Equilibrium Cycle Modular High Temperature Reactor (MHTGR) was calculated with INSTANT, using the provided geometry, material descriptions, and detailed cross-section libraries. Exercise 2 required the modeling of a stand-alone thermal fluids solution. The RELAP5-3D results of four sub-cases are discussed, consisting of various combinations of coolant bypass flows and material thermophysical properties. Exercise 3 combined the first two exercises in a coupled neutronics and thermal fluids solution, and the coupled code suite PHISICS/RELAP5-3D was used to calculate the results of two sub-cases. The main focus of the paper is a comparison of the traditional RELAP5-3D “ring” model approach vs. a much more detailed model that include kinetics feedback on individual block level and thermal feedbacks on a triangular sub-mesh. The higher fidelity of the block model is illustrated with comparison results on the temperature, power density and flux distributions, and the typical under-predictions produced by the ring model approach are highlighted.

  6. North Sea development action brisk; plays expand elsewhere off Europe

    SciTech Connect

    Knott, D.J.

    1996-08-19

    The North Sea may be a mature play, but operators are continually searching for new ways to develop small finds near existing infrastructure and to develop discoveries in new areas at low cost. As they fill in gaps in the North Sea oil and gas infrastructure, companies are also exploring and planning developments in new plays such as the U.K.`s West of Shetlands area, the Irish Sea, and the Atlantic Margin from off western Ireland to northern Norway. Floating production systems and subsea technology are vital parts of many of Northwest Europe`s recently sanctioned field developments, for both large and small reservoirs. The paper discusses the dominant role of floating production units, the niche for subsea developments, new production, the Harding field, the Schieballion and Clair fields (UK), Norway`s plans, the Elgin/Franklin field, small fields, frontier work, in-field projects, flexible floating platforms, deepwater technology, a gas monotower, and subsea control.

  7. R and D in France and in Western Europe

    SciTech Connect

    Bastin, A.J.F. )

    1991-06-01

    This paper deals with worldwide electric utility R and D, but focuses on France first, and not on Western Europe as a whole. Apart from the fact that the R and D of European utilities hardly show a homogeneous set, there are four basic reasons. To begin with, France represents roughly 20 percent of Western Europe by itself. Germany, now extended to the late DDR, is the only country to have a larger share. Second, Electricite de France (EDF) is the largest electric utility worldwide, with annual sales of about 410 TWh. Third, EDF has consistently shown one of the lowest electricity prices: as an average .44 FF par kWh (about $.08 per kWh) which comes up on comparing the 410 TWh sales with a 165 GFF turnover. Beyond these three points, which are more or less permanent, it appears that both EDF and its R and D division have been stable over the last three years. So the French power system is the largest subsystem in Western Europe where a single well-defined R and D policy can be described and assessed; this is what the authors are going to do now.

  8. Evaluation of transboundary environmental issues in Central Europe

    SciTech Connect

    Engi, D.; Kapustka, L.A.; Williams, B.A.; Meganck, R.A.; Garrison, J.G.; Glicken, J.; Hostetler, C.J.; Lawrence, S.

    1997-05-01

    Central Europe has experienced environmental degradation for hundreds of years. The proximity of countries, their shared resources, and transboundary movement of environmental pollution, create the potential for regional environmental strife. The goal of this project was to identify the sources and sinks of environmental pollution in Central Europe and evaluate the possible impact of transboundary movement of pollution on the countries of Central Europe. In meeting the objectives of identifying sources of contaminants, determining transboundary movement of contaminants, and assessing socio-economic implications, large quantities of disparate data were examined. To facilitate use of the data, the authors refined mapping procedures that enable processing information from virtually any map or spreadsheet data that can be geo-referenced. Because the procedure is freed from a priori constraints of scale that confound most Geographical Information Systems, they have the capacity to generate new projections and apply sophisticated statistical analyses to the data. The analysis indicates substantial environmental problems. While transboundary pollution issues may spawn conflict among the Central European countries and their neighbors, it appears that common environmental problems facing the entire region have had the effect of bringing the countries together, even though opportunities for deteriorating relationships may still arise.

  9. Conventional armed forces in Europe: Technology scenario development

    SciTech Connect

    Houser, G.M.

    1990-07-01

    In January 1986, the Soviet Union's Mikhail Gorbachev proposed elimination of all nuclear weapons by the year 2000. In April of that year, Mr. Gorbachev proposed substantial reductions of conventional weapons in Europe, from the Atlantic Ocean to the Ural Mountains, including reductions in operational-tactical nuclear weapons. In May 1986, the North Atlantic Treaty Organization (NATO) responded with the Brussels Declaration on Conventional Arms Control,'' which indicated readiness to open East/West discussions on establishing a mandate for negotiating conventional arms control throughout Europe. The Group of 23,'' which met in Vienna beginning in February 1987, concluded the meeting in January 1989 with a mandate for the Conventional Armed Forced in Europe (CFE) negotiations. On 6 March 1989, CFE talks began, and these talks have continued through six rounds (as of April 1990). Although US President George Bush, on 30 May 1989, called for agreement within six months to a year, and the Malta meeting of December 1989 called for completion of a CFE agreement by the end of 1990, much remains to be negotiated. This report provides three types of information. First, treaty provisions brought to the table by both sides are compared. Second, on the basis of these provisions, problem areas for each of the provision elements are postulated and possible scenarios for resolving these problem areas are developed. Third, the scenarios are used as requirements for tasks assigned program elements for possible US implementation of a CFE treaty. As progress is achieved during the negotiations, this report could be updated, as necessary, in each of the areas to provide a continuing systematic basis for program implementation and technology development. 8 refs.

  10. Risk reduction projects in Russia, Ukraine, and eastern Europe

    SciTech Connect

    Guppy, J.G.; Fitzpatrick, R.G.; Reisman, A.W. ); Spencer, B.W. )

    1993-01-01

    Assistance to Russia, Ukraine, and Central and Eastern Europe countries (CEEC) in the area of nuclear power safety has been undertaken in the United States. The U.S. Department of Energy is responsible for implementing the nuclear safety portion of this assistance. One aspect of this work is to provide near-term improvement to the safety of VVER and RBMK nuclear power plants (NPPs). This activity has been designated as near-term risk reduction (NTRR). This accident risk reduction effort is being conducted by utilizing teams of experts.

  11. U.S. and Spain to Develop Solar Decathlon Europe | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Spain to Develop Solar Decathlon Europe U.S. and Spain to Develop Solar Decathlon Europe October 18, 2007 - 3:21pm Addthis WASHINGTON, DC - Today U.S. Department of Energy (DOE) Assistant Secretary for Energy Efficiency and Renewable Energy Alexander Karsner and Spain's Undersecretary of Housing Fernando Magro Fernández signed a Memorandum of Understanding (MOU) to collaborate in the development of a Solar Decathlon Europe competition in 2010. The Solar Decathlon is a competition launched by

  12. Sustainable Heat Power Europe GmbH formerly Solar Heat Power...

    OpenEI (Open Energy Information) [EERE & EIA]

    involved in the project development, design and construction of solar thermal, PV and biogas power plants. References: Sustainable Heat & Power Europe GmbH (formerly Solar Heat &...

  13. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update

    U.S. Energy Information Administration (EIA) OECD The Organization of Economic Cooperation and Development (OECD) consists of the United States, much of Europe, and other advanced countries. At 53 percent of world oil consumption in 2010, these large economies consume more oil than the non-OECD countries, but have much lower oil consumption growth. Oil consumption in the OECD countries actually declined in the decade between 2000 and 2010, whereas non-OECD consumption rose 40 percent during

  14. Advancing strategic environmental assessment in the offshore oil and gas sector: Lessons from Norway, Canada, and the United Kingdom

    SciTech Connect

    Fidler, Courtney; Noble, Bram

    2012-04-15

    Abstract: Strategic environmental assessment (SEA) for offshore oil and gas planning and development is utilized in select international jurisdictions, but the sector has received limited attention in the SEA literature. While the potential benefits of and rationale for SEA are well argued, there have been few empirical studies of SEA processes for the offshore sector. Hence, little is known about the efficacy of SEA offshore, in particular its influence on planning and development decisions. This paper examines SEA practice and influence in three international offshore systems: Norway, Atlantic Canada and the United Kingdom, with the intent to identify the challenges, lessons and opportunities for advancing SEA in offshore planning and impact assessment. Results demonstrate that SEA can help inform and improve the efficacy and efficiency of project-based assessment in the offshore sector, however weak coordination between higher and lower tiers limit SEA's ability to influence planning and development decisions in a broad regional environmental and socioeconomic context. - Highlights: Black-Right-Pointing-Pointer SEA can inform and improve the efficacy and efficiency of project EA offshore Black-Right-Pointing-Pointer Scope and deliverables of SEA offshore often differ from stakeholder expectations Black-Right-Pointing-Pointer Considerable variability in influence of SEA output beyond licensing decisions Black-Right-Pointing-Pointer Sector-based SEA offshore is often too restrictive to generate expected benefits.

  15. New Multi-group Transport Neutronics (PHISICS) Capabilities for RELAP5-3D and its Application to Phase I of the OECD/NEA MHTGR-350 MW Benchmark

    SciTech Connect

    Gerhard Strydom; Cristian Rabiti; Andrea Alfonsi

    2012-10-01

    PHISICS is a neutronics code system currently under development at the Idaho National Laboratory (INL). Its goal is to provide state of the art simulation capability to reactor designers. The different modules for PHISICS currently under development are a nodal and semi-structured transport core solver (INSTANT), a depletion module (MRTAU) and a cross section interpolation (MIXER) module. The INSTANT module is the most developed of the mentioned above. Basic functionalities are ready to use, but the code is still in continuous development to extend its capabilities. This paper reports on the effort of coupling the nodal kinetics code package PHISICS (INSTANT/MRTAU/MIXER) to the thermal hydraulics system code RELAP5-3D, to enable full core and system modeling. This will enable the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5-3D (NESTLE). In the second part of the paper, an overview of the OECD/NEA MHTGR-350 MW benchmark is given. This benchmark has been approved by the OECD, and is based on the General Atomics 350 MW Modular High Temperature Gas Reactor (MHTGR) design. The benchmark includes coupled neutronics thermal hydraulics exercises that require more capabilities than RELAP5-3D with NESTLE offers. Therefore, the MHTGR benchmark makes extensive use of the new PHISICS/RELAP5-3D coupling capabilities. The paper presents the preliminary results of the three steady state exercises specified in Phase I of the benchmark using PHISICS/RELAP5-3D.

  16. International energy outlook. Volume 2. Europe (including USSR)

    SciTech Connect

    Jablonski, D.M.

    1982-01-01

    Europe, like the rest of the globe, still is reeling from the blows of energy crises. European countries are finding energy a critical bottom line to their development and future well-being. To reduce energy dependency and improve fiscal balance, the countries are placing increasing emphasis on exploiting their indigenous energy sources. This volume, Volume 2 is a compilation of official US government intelligence reports examining energy trends and related data in 10 European countries: France, Greece, Italy, Netherlands, Norway, Spain, Sweden, West Germany, Yugoslvania and the Soviet Union. The range and detail of country coverage vary, dut to availability of reports. Although the book details current energy situations, its main emphasis is on the future, including estimates of future production and consumption, and descriptions of energy-development plans. The countries not endowed with large petroleum resources are moving toward non-oil sources. 5 references, 65 tables.

  17. Strategies for financing energy projects in East Central Europe

    SciTech Connect

    Fortino, S.E.

    1995-12-01

    This paper discusses financing options available for energy (power/steam) projects in East Central Europe. It is intended to be an overview and practical guide to such options in today`s environment. A survey is made of the principal multilateral and other financial institutions providing funding and/or credit support in the region. These include the European Bank for Reconstruction and Development, the World Bank, the International Finance Corporation, the export credit agencies, and the commercial banks. Specific guarantee and other support mechanisms which some of these institutions provide are covered, including the latest developments. In addition to loan financing, potential sources of equity financing are discussed. Next, a description of the credit rating process by such institutions as Standard and Poor`s, and an example of a successful rating effort in the Czech Republic, lead into a discussion of accessing foreign and domestic bond markets to finance energy projects in the region.

  18. Cogeneration trends in Europe history -- State of the art - Outlook

    SciTech Connect

    Hunschofsky, H.

    1998-07-01

    Cogeneration, the utilization of heat created while producing electricity from fossil fuels, is by no means a new technology. In 1926, 71 years ago, a brochure from MAN in Germany showed a heat recovery system for diesel engines. Despite the fact that cogeneration has existed for a long time, it took half a century and the first so called ``oil crisis'' in the 1970's for societies to become aware of limited energy resources. Environmental groups gave cogeneration an additional boost in the 1980's. Additionally, governments in the Western European Nations attracted cogeneration investors by not only providing subsidies and tax breaks but also regulating electricity prices. Although there has been much growth in the cogeneration market in the past years, the industry has still not reached its peak in Europe. A variety of studies have shown that there is still significant growth potential in the future: WWF (World Wildlife Fund) published a study in 1996 suggesting a target of 330 Twh of generation will be produced through cogeneration by the year 2005, a tripling of current generation. Due to the EU's belief that cogeneration is an optimal form of generation, it has developed a cogeneration strategy. As part of this strategy, the EC is promoting cogeneration so that it accounts for 20% of all European generation by the year 2010. These factors would give a variety of companies such as equipment suppliers, investment companies, utilities, consultants and energy brokers a wide range of opportunities in Europe. Detailed information and some hints will be given as to how to participate in this fast growing industry. Ways to overcome obstacles in those markets will be shown as well as the pros and cons of different entry strategies.

  19. Periprocedural Prophylactic Antithrombotic Strategies in Interventional Radiology: Current Practice in the Netherlands and Comparison with the United Kingdom

    SciTech Connect

    Wiersema, Arno M.; Vos, Jan-Albert; Bruijninckx, Cornelis M. A.; Delden, Otto M. van; Reijnen, Michel M. P. J.; Vahl, Anco; Zeebregts, Clark J.; Moll, Frans L.

    2013-12-15

    Purpose: The use of prophylactic antithrombotic drugs to prevent arterial thrombosis during the periprocedural period during (percutaneous) peripheral arterial interventions (PAIs) is still a matter of dispute, and clear evidence-based guidelines are lacking. To create those guidelines, a study group was formed in the Netherlands in cooperation with the Dutch Society of Vascular Surgery and the Society of Interventional Radiology. The study group is called 'Consensus on Arterial PeriProcedural Anticoagulation (CAPPA).' Materials and Methods: The CAPPA study group devised and distributed a comprehensive questionnaire amongst Dutch interventional radiologists (IRs). Results: One hundred forty-two IRs responded (68 %) to the questionnaire. Almost no IR stopped acetyl salicylic acid before interventions, and 40 % stopped clopidogrel before PAI but not before carotid artery stenting (CAS). A flushing solution on the sideport of the sheath was used routinely by 30 % of IRs in PAI and by 50 % of IRs during CAS. A minority of IRs used a heparinised flushing solution (28 %). Unfractionated heparin was used by 95 % of IRs as bolus; 5000 IU was the most used dosage. Timing of administration varied widely. A majority of IRs (75 %) repeated heparin administration after 1 h. Conclusion: A substantial variety exists amongst IRs in the Netherlands regarding the use of prophylactic periprocedural antithrombotic drugs to prevent arterial thrombosis during PAI. When compared with varying results regarding the use of heparin in the United Kingdom, the variety in the Netherlands showed a different pattern. The proven variety in these countries, and also between these countries, emphasises the need for authoritative studies to develop evidence-based practical guidelines.

  20. Effects of liberalizing the natural gas market in western Europe

    SciTech Connect

    Golombek, R.

    1995-12-31

    This paper uses a numerical model to examine the long-run impact of a radical liberalization of the West-European natural gas markets. We study profit maximizing Cournot producers facing an ideal third party access regime for gas transport. producers sell gas weather to large users in the manufacturing industry and to gas-fired thermal power plants, or to loval distribution companies. We first examine the case where no traders exploit arbitrage possibilities and some producers have limited access to the markets. In this equilibrium net prices differ across markets. These differences disappear in the second case where traders are introduced. The third case focuses on a complete European market for natural gas in which traders exploit all arbitrage possibilities and all producers can sell gas in all markets. We also study the impact on the complete European market of changes in costs for production, transport, and distribution. Finally, welfare implications from a liberalization of the West-European natural gas markets are discussed. We argue that a radical liberalization could increase economic welfare in Western Europe by 15% to 20% in the long run. 35 refs., 9 tabs.

  1. Fact #752: November 5, 2012 Western Europe Plug-in Car Sales, 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy 2: November 5, 2012 Western Europe Plug-in Car Sales, 2012 Fact #752: November 5, 2012 Western Europe Plug-in Car Sales, 2012 Using data for the first seven months of 2012, Norway has the highest plug-in car market share at 2.55%. The Netherlands has the second highest plug-in market share (0.59%) and despite its small size, accounts for 16.1% of all plug-ins sold in Western Europe (see pie chart). France accounted for 22.3% of Western European plug-in car sales,

  2. Utilization options for fly ash, bottom ash, and slag in Eastern Europe

    SciTech Connect

    Manz, O.E.

    1995-12-01

    Since 1967, at least six ash utilization symposiums have been held in the United States, with papers presented by several European authors on the utilization of coal by-products in Eastern Europe. There is currently over 80,000 megawatts of installed coal-fired capacity available in that region. Unfortunately, of the 117,778,000 tonnes of fly ash, bottom ash, and slag produced in Eastern Europe in 1989, only 13% was utilized. This paper outlines the research and levels and kinds of coal by-product utilization taking place in Eastern Europe since the late 1960s.

  3. EV-Smart Grid Interoperability Centers in Europe and the United...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    EV-Smart Grid Interoperability Centers in Europe and the United States The EV-Smart Grid Interoperability Centers at the U.S. Department of Energy's Argonne National Laboratory and...

  4. Fact #644: October 11, 2010 Share of Diesel Vehicle Sales Decline in Western Europe

    Energy.gov [DOE]

    The share of new diesel vehicles sold in Western Europe rose steadily from 1999 to 2007. However, from 2007 to 2009, the share of diesel vehicle sales has begun to decline. Germany and Italy have...

  5. PowerPoint Presentation

    Gasoline and Diesel Fuel Update

    20 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Pacific Rim Impacts of US Shale Boom Jason Bordoff 2013 EIA Energy Conference June 17, 2013 1 420 W 118 th St, New York, NY 10027 | http://energypolicy.columbia.edu | @ColumbiaUEnergy Global Gas Demand Forecast Bcf/d Source: IEA WEO2012 0 100 200 300 400 500 600 2010 2015 2020 2025 2030 2035 Non-OECD Asia OECD Asia Africa Middle East Non-OECD Europe/Eurasia Europe Non-OECD Americas OECD Americas 2 420 W 118

  6. Fact #839: September 22, 2014 World Petroleum Consumption Continues to Rise despite Declines from the United States and Europe- Dataset

    Energy.gov [DOE]

    Excel file with dataset for Fact #839: World Petroleum Consumption Continues to Rise despite Declines from the United States and Europe

  7. Plus c`est la meme chose: The future of nuclear weapons in Europe

    SciTech Connect

    Maaranen, S.A.

    1996-07-01

    Since the end of the Cold War, the United States perhaps more than any other nuclear weapon state has deeply questioned the future role of nuclear weapons, both in a strategic sense and in Europe. It is probably the United States that has raised the most questions about the continuing need for and efficacy of nuclear weapons, and has expressed the greatest concerns about the negative consequences of continuing nuclear weapons deployment. In the US, this period of questioning has now come to a pause, if not a conclusion. In late 1994 the United States decided to continue to pursue reductions in numbers of nuclear weapons as well as other changes designed to reduce the dangers associated with the possession of nuclear weapons. But at the same time the US concluded that some number of nuclear forces would continue to be needed for national security for the foreseeable future. These necessary nuclear forces include a continuing but greatly reduced stockpile of nuclear bombs deployed in Europe under NATO`s New Strategic Concept. If further changes to the US position on nuclear weapons in Europe are to occur, it is likely to be after many years, and only in the context of dramatic additional improvements in the political and geo-political climate in and around Europe. The future role of nuclear weapons in Europe, as discussed in this report, depends in part on past and future decisions by the United States. but it must also be noted that other states that deploy nuclear weapons in Europe--Britain, France, and Russia, as well as the NATO alliance--have shown little inclination to discontinue their deployment of such weapons, whatever the United States might choose to do in the future.

  8. Fact #645: October 18, 2010 Price of Diesel Fuel versus Gasoline in Europe

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy 5: October 18, 2010 Price of Diesel Fuel versus Gasoline in Europe Fact #645: October 18, 2010 Price of Diesel Fuel versus Gasoline in Europe A comparison between the average annual price of a gallon of gasoline and a gallon of highway diesel fuel in several European countries shows that a large change took place in 2008. In most of the selected countries, the price of gasoline was 30 to 95 cents higher than that of diesel from 2001 to 2007. In 2008, the price

  9. Toward a zero-carbon energy policy in Europe: defining a viable solution

    SciTech Connect

    Jones, Christopher; Glachant, Jean-Michel

    2010-04-15

    The present pace of carbon emission is not sustainable. Human societies need to react and to change. A rational responsive policy to deliver the required carbon emission reduction can be delineated if the key objective parameters are identified and addressed. This article attempts to lay the groundwork for a viable carbon energy policy for Europe. (author)

  10. Tracing the HIV-1 subtype B mobility in Europe: a phylogeographic approach

    SciTech Connect

    Leitner, Thomas; Paraskevis, D; Pybus, O; Magiorkinis, G; Hatzakis, A

    2008-01-01

    The prevalence and the origin of HIV-1 subtype B, the most prevalent circulating clade among the long-term residents in Europe, have been studied extensively. However the spatial diffusion of the epidemic from the perspective of the virus has not previously been traced. In the current study we inferred the migration history of HIV-1 subtype B by way of a phylogeography of viral sequences sampled from 16 European countries and Israel. Migration events were inferred from viral phylogenies by character reconstruction using parsimony. With regard to the spatial dispersal of the HIV subtype B sequences across viral phylogenies, in most of the countries in Europe the epidemic was introduced by multiple sources and subsequently spread within local networks. Poland provides an exception where most of the infections were the result of a single point introduction. According to the significant migratory pathways, we show that there are considerable differences across Europe. Specifically, Greece, Portugal, Serbia and Spain, provide sources shedding HIV-1; Austria, Belgium and Luxembourg, on the other hand, are migratory targets, while for Denmark, Germany, Italy, Israel, Norway, the Netherlands, Sweden, Switzerland and the UK we inferred significant bidirectional migration. For Poland no significant migratory pathways were inferred. Subtype B phylogeographies provide a new insight about the geographical distribution of viral lineages, as well as the significant pathways of virus dispersal across Europe, suggesting that intervention strategies should also address tourists, travellers and migrants.

  11. Scenarios for P/T implementation in Europe within a regional approach

    SciTech Connect

    Salvatores, M. |; Boucher, L.; Meyer, M.; Morel, D.; Na, B.; Schwenk-Ferrero, A.; Coddington, P.; Pelloni, S.; Gonzalez, E.; Verboomen, B.; Westlen, D.; Uhlir, J.

    2007-07-01

    A regional approach is proposed in order to implement the innovative fuel cycles associated to Partitioning and Transmutation in Europe. It is shown the impact of different deployment strategies and of different policies in different countries. Regional facilities characteristics and potential deployment schedule are also discussed. (authors)

  12. Technical and commercial aspects of the connection of wind turbines to electricity supply networks in Europe

    SciTech Connect

    Gardner, P.

    1996-12-31

    This paper reviews some technical and commercial issues now topical for wind energy developments in Europe. The technical issues are important because of the weak nature of the existing electricity systems in rural or upland areas. Several commercial issues are considered which may improve the economics of wind energy as market incentives are gradually withdrawn. 9 refs.

  13. Example Application for Cori Phase II Early Access for NESAP code EMGeo

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  14. Executive Summary

    Gasoline and Diesel Fuel Update

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  15. Variscan fold belt and its foreland in western Europe from late Carboniferous to Permian time

    SciTech Connect

    Mascle, A.; Benard, F.; Cazes, M.; Le Gall, B.

    1988-08-01

    The Variscan front was emplaced in the Later Carboniferous with a south-to-north or southeast-to-northwest-trending vergence of thrusting. At the same time, folds were formed in the foreland. In England and southern Scotland, such structures were induced by an east-west direction of shortening, followed by a more subdued north-south compressive event. In Stephanian time, isolated basins developed on the Hercynian belt. In the Massif Central Marues Massif, they are closely related to transcurrent faults which developed in response to north-south-trending compressive stresses. The distribution of stresses completely changed in Early Permian time when extension dominated almost everywhere. Three kinds of basins developed at that time: those related to the relaxation of stresses on the Hercynian range, a north-south-trending rift system in the western United Kingdom and the North Sea, and a broad flexural evaporitic basin from eastern England to Poland.

  16. Decommissioning of the Dragon High Temperature Reactor (HTR) Located at the Former United Kingdom Atomic Energy Authority (UKAEA) Research Site at Winfrith - 13180

    SciTech Connect

    Smith, Anthony A.

    2013-07-01

    The Dragon Reactor was constructed at the United Kingdom Atomic Energy Research Establishment at Winfrith in Dorset through the late 1950's and into the early 1960's. It was a High Temperature Gas Cooled Reactor (HTR) with helium gas coolant and graphite moderation. It operated as a fuel testing and demonstration reactor at up to 20 MW (Thermal) from 1964 until 1975, when international funding for this project was terminated. The fuel was removed from the core in 1976 and the reactor was put into Safestore. To meet the UK's Nuclear Decommissioning Authority (NDA) objective to 'drive hazard reduction' [1] it is necessary to decommission and remediate all the Research Sites Restoration Ltd (RSRL) facilities. This includes the Dragon Reactor where the activated core, pressure vessel and control rods and the contaminated primary circuit (including a {sup 90}Sr source) still remain. It is essential to remove these hazards at the appropriate time and return the area occupied by the reactor to a safe condition. (author)

  17. Trial operation of a phosphoric acid fuel cell (PC25) for CHP applications in Europe

    SciTech Connect

    Uhrig, M.; Droste, W.; Wolf, D.

    1996-12-31

    In Europe, ten 200 kW phosphoric acid fuel cells (PAFCs) produced by ONSI (PC25) are currently in operation. Their operators collaborate closely in the European Fuel Cell Users Group (EFCUG). The experience gained from trial operation by the four German operators - HEAG, HGW/HEW, Thyssengas and Ruhrgas - coincides with that of the other European operators. This experience can generally be regarded as favourable. With a view to using fuel cells in combined heat and power generation (CHP), the project described in this report, which was carried out in cooperation with the municipal utility of Bochum and Gasunie of the Netherlands, aimed at gaining experience with the PC 25 in field operation under the specific operating conditions prevailing in Europe. The work packages included heat-controlled operation, examination of plant behavior with varying gas properties and measurement of emissions under dynamic load conditions. The project received EU funding under the JOULE programme.

  18. Uranium production in Eastern Europe and its environmental impact: A literature survey

    SciTech Connect

    Norman, R.E.

    1993-04-01

    A survey of the unclassified literature was made to determine the location, technology, throughput, and environmental status of the uranium mines and mills that have historically made up uranium production capability in Eastern Europe. Included in that survey were the following countries: the former German Democratic Republic (GDR), now part of a reunited Germany, Czechoslovakia, Romania, Bulgaria, Hungary, and Poland. Until recently, uranium was being produced in five of these six countries (Poland stopped production 20 years ago). The production began directly after World War II in support of weapons production in the Soviet Union. Eastern Europe has produced about two-thirds of the total Soviet uranium inventory historically, or about 330,000 metric tonnes of uranium (NM) [730 million pounds of uranium (MlbU)l out of a total of about 490,000 MTU (1090 NlbU).

  19. Eastern Europe Research Reactor Initiative nuclear education and training courses - Current activities and future challenges

    SciTech Connect

    Snoj, L.; Sklenka, L.; Rataj, J.; Boeck, H.

    2012-07-01

    The Eastern Europe Research Reactor Initiative was established in January 2008 to enhance cooperation between the Research Reactors in Eastern Europe. It covers three areas of research reactor utilisation: irradiation of materials and fuel, radioisotope production, neutron beam experiments, education and training. In the field of education and training an EERRI training course was developed. The training programme has been elaborated with the purpose to assist IAEA Member States, which consider building a research reactor (RR) as a first step to develop nuclear competence and infrastructure in the Country. The major strength of the reactor is utilisation of three different research reactors and a lot of practical exercises. Due to high level of adaptability, the course can be tailored to specific needs of institutions with limited or no access to research reactors. (authors)

  20. Community wind power ownership schemes in Europe and their relevance to the United States

    SciTech Connect

    Bolinger, Mark

    2001-05-15

    With varying success, the United States and Europe have followed a more or less parallel path of policies to support wind development over the past twenty years. Feed-in laws and tax incentives first popularized in California in the early 1980s and greatly expanded upon in Europe during the 1990s are gradually giving way to market-based support mechanisms such as renewable portfolio standards, which are being implemented in one form or another in ten US states and at least three European nations. At the same time, electricity markets are being liberalized in both the US and Europe, and many electricity consumers are being given the choice to support the development of renewable energy through higher tariffs, both in traditionally regulated and newly competitive markets. One notable area in which wind development in Europe and United States has not evolved in common, however, is with respect to the level of community ownership of wind turbines or clusters. While community ownership of wind projects is unheard of in the United States, in Europe, local wind cooperatives or other participatory business schemes have been responsible for a large share of total wind development. In Denmark, for example, approximately 80% of all wind turbines are either individually or cooperatively owned, and a similar pattern holds in Germany, the world leader in installed wind capacity. Sweden also has a strong wind cooperative base, and the UK has recently made forays into community wind ownership. Why is it that wind development has evolved this way in Europe, but not in the United States? What incremental effect have community-owned wind schemes had on European wind development? Have community-owned wind schemes driven development in Europe, or are they merely a vehicle through which the fundamental driving institutions have been channeled? Is there value to having community wind ownership in the US? Is there reason to believe that such schemes would succeed in the US? If so, which

  1. The Protein Data Bank in Europe (PDBe): bringing structure to biology

    SciTech Connect

    Velankar, Sameer; Kleywegt, Gerard J.

    2011-04-01

    Some future challenges for the PDB and its guardians are discussed and current and future activities in structural bioinformatics at the Protein Data Bank in Europe (PDBe) are described. The Protein Data Bank in Europe (PDBe) is the European partner in the Worldwide PDB and as such handles depositions of X-ray, NMR and EM data and structure models. PDBe also provides advanced bioinformatics services based on data from the PDB and related resources. Some of the challenges facing the PDB and its guardians are discussed, as well as some of the areas on which PDBe activities will focus in the future (advanced services, ligands, integration, validation and experimental data). Finally, some recent developments at PDBe are described.

  2. Energy in Europe and Central Asia: A sector strategy for the World Bank Group

    SciTech Connect

    1998-12-31

    Many countries in the Europe and Central Asia region have had an excess production capacity, lower quality supply, decreasing demand, and inefficient consumption in the energy sector since the late 1980s. This report outlines the four main objectives that form the World Bank Group`s strategy for reform: assisting governments to protect the public interest, supporting economic transition, facilitating private investments, and promoting regional initiatives to increase energy trade.

  3. EV-Smart Grid Interoperability Centers in Europe and the United States |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Argonne National Laboratory EV-Smart Grid Interoperability Centers in Europe and the United States The EV-Smart Grid Interoperability Centers at the U.S. Department of Energy's Argonne National Laboratory and the European Commission's Joint Research Centre (JRC) are providing a venue for global industry-government cooperation that is focused on the joint development of EV standards and test procedures. PDF icon es_ev-smartgrid-ctrs

  4. NO{sub x} controls for coal-fired utility boilers in East Central Europe

    SciTech Connect

    Eskinazi, D.; Tavoulareas, E.S.

    1995-12-01

    Increasing environmental pressures worldwide, including East Central Europe are placing greater emphasis on NO{sub x} emission controls in utility power plants. Western Europe, Japan and the U.S. have significant experience in applying NO{sub x} controls, especially in boilers firing hard coal. Some countries in Europe (i.e., Germany and Austria), have gained experience in applying NO{sub x} controls in boilers firing low-rank coal. This experience can be applied to East Central European countries in providing the basis for planning NO{sub x} control projects, suggesting cost-effective solutions, and providing lessons learned. However, while the experience is generally applicable to East Central European countries, differences in boiler design, operation and coal characteristics also need to be considered. This paper begins with a comparison of the NO{sub x} regulations, identifies the key NO{sub x} control technologies and the worldwide experience with them, and discusses the achievable NO{sub x} reduction, O&M impacts, and retrofit costs for each technology. Emphasis is placed on retrofit applications for existing boilers, because new coal-fired power plants are not expected to be built for the next 5-10 years. This paper also focuses on technologies with relatively low cost and operational simplicity: combustion system tuning/optimization. low-NO{sub x} burners (LNB), overfire air (OFA), selective non-catalytic reduction (SNCR), and reburning.

  5. Fact #716: February 27, 2012 Diesels are more than Half of New Cars Sold in Western Europe

    Energy.gov [DOE]

    In 2011, nearly 52% of all new cars sold in Western Europe were diesel. In Belgium, Norway, France and Spain more than 70% of the new car market in 2011 were diesels. The market penetration of...

  6. Light rain events change over North America, Europe and Asia for 1973-2009

    SciTech Connect

    Qian, Yun; Gong, Daoyi; Leung, Lai-Yung R.

    2010-10-28

    Long-term daily precipitation data from NCDC are used to investigate the changes of light rain events from 1973-2009 over North America, Europe and Asia. Results reveal that the trend of light rain events presents a remarkably diverse feature in different regions, while an overall decrease trend can be found over the continents in northern hemisphere. In North America, most of stations show a decrease trend for light rain on the annual basis but a decrease trend can also be found for moderate and heavy rain. The opposite trends are observed over the stations in Europe and the trend of light rain is not significant when averaged for all the stations. In Asia, especially East Asia, the light rain days show an overwhelming decrease trend with high spatial coherency. Meanwhile the moderate and heavy rain events (> 10 mm/day) have increased, suggesting a remarkable shift of precipitation from light to heavy rain in East Asia. While both the warming at a global scale and increased atmospheric aerosols due to air pollution at a regional scale (e.g. East Asia) may have affected the light rain changes, it remains a challenging task to quantitatively detect and separate the cause of light rain changes in different regions. ?

  7. Iberia versus Europe - Effects of continental break-up and round-up on hydrocarbon habitat

    SciTech Connect

    Bourrouilh, R.; Zolnai, G.

    1988-08-01

    Based on the continuity of foldbelts and the positions of intermountain continental nuclei and transcontinental megashears, a close Pangea fit is proposed for the central and north Atlantic borderlands. The Variscan arch segment missing between Brittany and Galicia in the Gulf of Gascony (Biscaye) can tentatively be identified with the Flemish Cap block off Newfoundland. At the same time the northwest African-Gondwana border (central Morocco) was located some 800 km farther to the west-northwest, as compared to its present position in southwestern Europe (Iberia). During the opening of the central and northern segments of the Atlantic Ocean (Jurassic and Cretaceous) and during the closure of the western Mediterranean basin, i.e., the thrust of Africa toward southern Europe (Tertiary), the European continental mass underwent deformation in the transtensive and transpressive modes, which reactivated parts of its inherited structural network. The trailing south European continental margin was partially dismembered into loosely bound continental blocks, to be assembled again during the subsequent Alpine orogenic cycle. These events can be compared with processes known in the northernmost and western segments of the North American continent. Mechanisms are proposed for the formation and deformation of inter- and intraplate basins by way of moderate shifts (wrenching) and slight rotations, the direction of which changed during the Mesozoic-Tertiary according to the global stress field. The above evolution and mechanisms had multiple and decisive effects on hydrocarbon generation, habitat, and accumulation.

  8. Biochemical and Structural Characterization of Two Dictyostelium Cellobiohydrolases from the Amoebozoa Kingdom Reveal a High Level of Conservation Between Distant Phylogenetic Trees of Life

    DOE PAGES [OSTI]

    Hobdey, Sarah E.; Knott, Brandon C.; Momeni, Majid Haddad; Taylor, II, Larry E.; Borisova, Anna S.; Podkaminer, Kara K.; VanderWall, Todd A.; Himmel, Michael E.; Decker, Stephen R.; Beckham, Gregg T.; et al

    2016-06-01

    Glycoside Hydrolase Family 7 (GH7) cellobiohydrolases (CBHs) are commonly employed enzymes in plant cell wall degradation across eukaryotic kingdoms of life, as they provide significant hydrolytic potential in cellulose turnover. To date, many fungal GH7 CBHs have been examined, yet many questions remain regarding structure-activity relationships in these important natural and commercial enzymes. Here, we present crystal structures and biochemical analysis of two GH7 CBHs from social amoeba: Dictyostelium discoideum and Dictyostelium purpureum (DdiCel7A and DpuCel7A, respectively). DdiCel7A and DpuCel7A natively consist of a catalytic domain and do not exhibit a carbohydrate-binding module (CBM). The structures, resolved to 2.1 Amore » (DdiCel7A), and 2.7 A (DpuCel7A), are homologous to other GH7 CBHs with an enclosed active site tunnel. Two primary differences between the Dictyostelium CBHs and the archetypal model GH7 CBH from Trichoderma reesei Cel7A (TreCel7A) occur near the hydrolytic active site and the product binding sites. To compare the activity of these enzymes with TreCel7A, the Family 1 TreCel7A CBM and linker was added to the C-terminus of the Dictyostelium enzymes, DdiCel7ACBM and DpuCel7ACBM, which were recombinantly expressed in T. reesei. DdiCel7ACBM and DpuCel7ACBM hydrolyze Avicel, pretreated corn stover, and phosphoric acid swollen cellulose as efficiently as TreCel7A when compared at their temperature optima. The Ki of cellobiose is significantly higher for DdiCel7ACBM and DpuCel7ACBM than for TreCel7A: 205, 130, and 29 uM, respectively. Taken together, the present study highlights the remarkable conservation in the activity of these key natural and industrial enzymes across quite distant phylogenetic trees of life.« less

  9. Biochemical and structural characterizations of two Dictyostelium cellobiohydrolases from the amoebozoa kingdom reveal a high level of conservation between distant phylogenetic trees of life

    DOE PAGES [OSTI]

    Hobdey, Sarah E.; Knott, Brandon C.; Momeni, Majid Haddad; Taylor, II, Larry E.; Borisova, Anna S.; Podkaminer, Kara K.; VanderWall, Todd A.; Himmel, Michael E.; Decker, Stephen R.; Beckham, Gregg T.; et al

    2016-04-01

    Glycoside hydrolase family 7 (GH7) cellobiohydrolases (CBHs) are enzymes often employed in plant cell wall degradation across eukaryotic kingdoms of life, as they provide significant hydrolytic potential in cellulose turnover. To date, many fungal GH7 CBHs have been examined, yet many questions regarding structure-activity relationships in these important natural and commercial enzymes remain. Here, we present the crystal structures and a biochemical analysis of two GH7 CBHs from social amoeba: Dictyostelium discoideum Cel7A (DdiCel7A) and Dictyostelium purpureum Cel7A (DpuCel7A). DdiCel7A and DpuCel7A natively consist of a catalytic domain and do not exhibit a carbohydrate-binding module (CBM). The structures of DdiCel7Amore » and DpuCel7A, resolved to 2.1 Å and 2.7 Å, respectively, are homologous to those of other GH7 CBHs with an enclosed active-site tunnel. Two primary differences between the Dictyostelium CBHs and the archetypal model GH7 CBH, Trichoderma reesei Cel7A (TreCel7A), occur near the hydrolytic active site and the product-binding sites. To compare the activities of these enzymes with the activity of TreCel7A, the family 1 TreCel7A CBM and linker were added to the C terminus of each of the Dictyostelium enzymes, creating DdiCel7ACBM and DpuCel7ACBM, which were recombinantly expressed in T. reesei. DdiCel7ACBM and DpuCel7ACBM hydrolyzed Avicel, pretreated corn stover, and phosphoric acid-swollen cellulose as efficiently as TreCel7A when hydrolysis was compared at their temperature optima. The Ki of cellobiose was significantly higher for DdiCel7ACBM and DpuCel7ACBM than for TreCel7A: 205, 130, and 29 μM, respectively. Finally, taken together, the present study highlights the remarkable degree of conservation of the activity of these key natural and industrial enzymes across quite distant phylogenetic trees of life.« less

  10. Transport of anthropogenic and biomass burning aerosols from Europe to the Arctic during spring 2008

    SciTech Connect

    Marelle, L.; Raut, Jean-Christophe; Thomas, J. L.; Law, K. S.; Quennehen, Boris; Ancellet, G.; Pelon, J.; Schwarzenboeck, A.; Fast, Jerome D.

    2015-04-10

    During the POLARCAT-France airborne campaign in April 2008, pollution originating from anthropogenic and biomass burning emissions was measured in the European Arctic. We compare these aircraft measurements with simulations using the WRF-Chem model to investigate model representation of aerosols transported from Europe to the Arctic. Modeled PM2.5 is evaluated using European Monitoring and Evaluation Programme (EMEP) measurements in source regions and POLARCAT aircraft measurements in the Scandinavian Arctic. Total PM2.5 agrees well with the measurements, although the model overestimates nitrate and underestimates organic carbon in source regions. Using WRF-Chem in combination with the Lagrangian model FLEXPART-WRF, we find that during the campaign the research aircraft sampled two different types of European plumes: mixed anthropogenic and fire plumes from eastern Europe and Russia transported below 2 km, and anthropogenic plumes from central Europe uplifted by warm conveyor belt circulations to 5–6 km. Both modeled plume types had undergone significant wet scavenging (> 50% PM10) during transport. Modeled aerosol vertical distributions and optical properties below the aircraft are evaluated in the Arctic using airborne lidar measurements. Model results show that the pollution event transported aerosols into the Arctic (> 66.6° N) for a 4-day period. During this 4-day period, biomass burning emissions have the strongest influence on concentrations between 2.5 and 3 km altitudes, while European anthropogenic emissions influence aerosols at both lower (~ 1.5 km) and higher altitudes (~ 4.5 km). As a proportion of PM2.5, modeled black carbon and SO4= concentrations are more enhanced near the surface in anthropogenic plumes. The European plumes sampled during the POLARCAT-France campaign were transported over the region of springtime snow cover in northern Scandinavia, where they had a significant

  11. Advanced reprocessing developments in Europe contribution of European projects ACSEPT and ACTINET-I3

    SciTech Connect

    Bourg, S.; Poinssot, C.; Geist, A.; Cassayre, L.; Rhodes, C.; Ekberg, C.

    2012-07-01

    Nuclear energy has more than ever to demonstrate that it can contribute safely and on a sustainable way to answer the international increase in energy needs. Actually, in addition to an increased safety of the reactors themselves, its acceptance is still closely associated to our capability to reduce the lifetime of the nuclear waste, to manage them safely and to propose options for a better use of the natural resources. Spent fuel reprocessing can help to reach these objectives. But this cannot be achieved only by optimizing industrial processes through engineering studies. It is of a primary importance to increase our fundamental knowledge in actinide sciences in order to build the future of nuclear energy on reliable and scientifically-founded results, and therefore meet the needs of the future fuel cycles in terms of fabrication and performance of fuels, reprocessing and waste management. At the European level, both the collaborative project ACSEPT and the Integrated Infrastructure Initiative ACTINET-I3 work together to improve our knowledge in actinides chemistry and therefore develop advanced separation processes. These tools are complementary and work in close connection on some specific issues such as the understanding of the selectivity of extracting organic ligands. By offering trans-national access to the main nuclear research facility in Europe, ACTINET-I3 aims at increasing the knowledge in actinide sciences by gathering all the expertise available in European nuclear research institutes or university and giving them the opportunity to come and work in hot-labs (ITU, Atalante...) or beamlines (ESFR, ANKA, PSI) ACSEPT is focused on the development of advanced separation processes, both aqueous and pyrochemical. Head-end steps, fuel re-fabrication, solvent treatment, waste management are also taken into account. In aqueous process development, the SANEX and innovative SANEX flowsheets demonstration were successfully achieved. Chemical systems were

  12. Transport of anthropogenic and biomass burning aerosols from Europe to the Arctic during spring 2008

    DOE PAGES [OSTI]

    Marelle, L.; Raut, Jean-Christophe; Thomas, J. L.; Law, K. S.; Quennehen, Boris; Ancellet, G.; Pelon, J.; Schwarzenboeck, A.; Fast, Jerome D.

    2015-04-10

    During the POLARCAT-France airborne campaign in April 2008, pollution originating from anthropogenic and biomass burning emissions was measured in the European Arctic. We compare these aircraft measurements with simulations using the WRF-Chem model to investigate model representation of aerosols transported from Europe to the Arctic. Modeled PM2.5 is evaluated using European Monitoring and Evaluation Programme (EMEP) measurements in source regions and POLARCAT aircraft measurements in the Scandinavian Arctic. Total PM2.5 agrees well with the measurements, although the model overestimates nitrate and underestimates organic carbon in source regions. Using WRF-Chem in combination with the Lagrangian model FLEXPART-WRF, we find that duringmore » the campaign the research aircraft sampled two different types of European plumes: mixed anthropogenic and fire plumes from eastern Europe and Russia transported below 2 km, and anthropogenic plumes from central Europe uplifted by warm conveyor belt circulations to 5–6 km. Both modeled plume types had undergone significant wet scavenging (> 50% PM10) during transport. Modeled aerosol vertical distributions and optical properties below the aircraft are evaluated in the Arctic using airborne lidar measurements. Model results show that the pollution event transported aerosols into the Arctic (> 66.6° N) for a 4-day period. During this 4-day period, biomass burning emissions have the strongest influence on concentrations between 2.5 and 3 km altitudes, while European anthropogenic emissions influence aerosols at both lower (~ 1.5 km) and higher altitudes (~ 4.5 km). As a proportion of PM2.5, modeled black carbon and SO4= concentrations are more enhanced near the surface in anthropogenic plumes. The European plumes sampled during the POLARCAT-France campaign were transported over the region of springtime snow cover in northern Scandinavia, where they had a significant local atmospheric warming effect. We find that, during this

  13. Minerals yearbook: Mineral industries of Europe and central Eurasia. Volume 3. 1992 international review

    SciTech Connect

    Not Available

    1992-01-01

    Volume III, Minerals Yearbook -- International Review contains the latest available mineral data on more than 175 foreign countries and discusses the importance of minerals to the economies of these nations. Since the 1989 International Review, the volume has been presented as six reports. The report presents the Mineral Industries of Europe and Central Eurasia. The report incorporates location maps, industry structure tables, and an outlook section previously incorporated in the authors' Minerals Perspectives Series quinquennial regional books, which are being discontinued. This section of the Minerals Yearbook reviews the minerals industries of 45 countries: the 12 nations of the European Community (EC); 6 of the 7 nations of the European Free Trade Association (EFTA); Malta; the 11 Eastern European economies in transition (Albania, Bosnia and Hercegovina, Bulgaria, Croatia, Czechoslovakia, Hungary, Macedonia, Poland, Romania, Serbia and Montenegro, and Slovenia); and the countries of Central Eurasia (Armenia, Azerbaijan, Belarus, Estonia, Georgia, Kazakhstan, Kyrgystan, Latvia, Lithuania, Moldova, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan).

  14. Developing a strategy for improving efficiency in the heating sector in central and eastern Europe

    SciTech Connect

    Meyer, A.S.

    1995-12-31

    Heating is a vital energy service in Central and Eastern Europe, but the current delivery mechanisms are riddled with problems. District heating (DH) in its present technical form and with the present management structures is an inefficient system which produces expensive heat. Customers cannot control it and react to overheating by opening windows, even in winter. DH facilities together with other forms of individual heating are responsible for air pollution, causing severe impacts on the health of urban residents. The issues relating to DH are discussed, the first World Bank activities and experiences with projects in Poland are analyzed, and the cornerstones of a strategy to support future World Bank financing and the development of sound heating policies in CEE are presented.

  15. Forecasting the northern African dust outbreak towards Europe in April 2011: A model intercomparison

    DOE PAGES [OSTI]

    Huneeus, N.; Basart, S.; Fiedler, S.; Morcrette, J. -J.; Benedetti, A.; Mulcahy, J.; Terradellas, E.; Garcia-Pando, C. Perez; Pejanovic, G.; Nickovic, S.; et al

    2016-04-21

    In the framework of the World Meteorological Organisation's Sand and Dust Storm Warning Advisory and Assessment System, we evaluated the predictions of five state-of-the-art dust forecast models during an intense Saharan dust outbreak affecting western and northern Europe in April 2011. We assessed the capacity of the models to predict the evolution of the dust cloud with lead times of up to 72 h using observations of aerosol optical depth (AOD) from the AErosol RObotic NETwork (AERONET) and the Moderate Resolution Imaging Spectroradiometer (MODIS) and dust surface concentrations from a ground-based measurement network. In addition, the predicted vertical dust distributionmore » was evaluated with vertical extinction profiles from the Cloud and Aerosol Lidar with Orthogonal Polarization (CALIOP). To assess the diversity in forecast capability among the models, the analysis was extended to wind field (both surface and profile), synoptic conditions, emissions and deposition fluxes. Models predict the onset and evolution of the AOD for all analysed lead times. On average, differences among the models are larger than differences among lead times for each individual model. In spite of large differences in emission and deposition, the models present comparable skill for AOD. In general, models are better in predicting AOD than near-surface dust concentration over the Iberian Peninsula. Models tend to underestimate the long-range transport towards northern Europe. In this paper, our analysis suggests that this is partly due to difficulties in simulating the vertical distribution dust and horizontal wind. Differences in the size distribution and wet scavenging efficiency may also account for model diversity in long-range transport.« less

  16. Development of a National M and O Contractor Work Prioritisation Process and its Use as a Progress Measure for Nuclear Clean Up in the United Kingdom

    SciTech Connect

    Waite, R.; Hudson, I.D.; Wareing, M.I.

    2006-07-01

    In July 2004, Her Majesty's Government established a Nuclear Decommissioning Authority (NDA) to assume responsibility for the discharge of the vast majority of the United Kingdom's public sector civil nuclear liabilities. The Energy Act of 2004 outlines in greater detail how the NDA functions, what its responsibilities are, and how these fit into the overall structure of the UK programme for managing and disposing of the liabilities created by a significant element of the UK's early commercial and nuclear weapons activities. The amount of Government funding provided to the NDA will be a key factor in determining what can be achieved. In agreeing how the funds are distributed to the licensed sites, the NDA will need to keep in mind the 'guiding principles' stated in 'Managing the Nuclear Legacy - A Strategy for Action': - Focus on getting the job done to high safety, security and environmental standards; - Best value for money consistent with safety, security and environmental performance; - Openness and transparency. To satisfy these requirements there is a need for a transparent process for justifying and prioritising work that aids decisions about what should be done and when, is straightforward to understand and can be applied by a wide range of stakeholders. To develop such a process, a multi-stakeholder group (the 'Prioritisation Working Group') produced a report published in April 2005 that examined how the process would align with the NDA's overall management processes. It also identified six criteria or 'attributes' that should be taken into account, and a variety of measures, or 'metrics' that could be used to assess each attribute. The report formed the basis of preliminary guidance from NDA to the site licensees that was used to guide their submissions on plans and programmes of work in 2005. Since this report the NDA has been working, with stakeholder input, to develop a prioritisation process to be used during the production of future Life Cycle

  17. Energy conservation and electricity sector liberalization: Case-studies on the development of cogeneration, wind energy and demand-side management in the Netherlands, Denmark, Germany and the United Kingdom

    SciTech Connect

    Slingerland, S.

    1998-07-01

    In this paper, the development of cogeneration, wind energy and demand-side management in the Netherlands, Denmark, Germany and the United Kingdom are compared. It is discussed to what extent these developments are determined by the liberalization process. Three key liberalization variables are identified: unbundling, privatization and introduction of competition. The analysis suggests that unbundling prior to introduction of full competition in generation is particularly successful in stimulating industrial cogeneration; simultaneous introduction of competition and unbundling mainly stimulates non-cogeneration gas-based capacity; and introduction of competition in itself is likely to impede the development of district-heating cogeneration. Furthermore, it is argued that development of wind energy and demand-side management are primarily dependent on the kind of support system set up by policy makers rather than on the liberalization process. Negative impacts of introduction of competition on integrated resource planning and commercial energy services could nevertheless be expected.

  18. The ecological relevance of transport in waste disposal systems in Western Europe

    SciTech Connect

    Salhofer, Stefan Schneider, Felicitas; Obersteiner, Gudrun

    2007-07-01

    With the development of modern waste management systems in Western Europe, a remarkable increase in the distances for waste transportation has been observed. The question thus arises whether recycling with longer transport distances is ecologically advantageous or whether disposal without recycling is to be preferred. This situation was analysed using selected product and waste streams. This included refrigerators, paper, polyethylene films and expanded polystyrene. For each of these streams, a life cycle analysis was conducted with an emphasis on waste transport. The system boundaries were set in terms of the generation of waste to recycling or landfilling. The comparison included several scenarios with recycling and different transport distances. Landfilling was used as the reference scenario. The results obtained demonstrated how transport distances influence the ecological benefit of recycling. In the case of expanded polystyrene, the ecological boundaries are reached in practical situations, while with other materials these boundaries are far from being attained. In these cases, more complex and elaborate collection schemes, such as kerbside collection, which is economically convenient and shows the highest collection rates, can also be recommended.

  19. Scrap recycling and production of high quality steel grades in Europe

    SciTech Connect

    Marique, C.

    1996-12-31

    The possible deleterious effects of higher contents in tramp elements on steel properties must be well defined in order to keep them within acceptable limits. No industrial technique is presently available to remove tramp elements from steel melts. Only a strict control on the metallic input and on the scrap composition is feasible. In this matter, scrap preparation which aims at a better separation between iron and other nonferrous components, is getting more attention. A large multinational project has been initiated in Europe under the sponsorship of ECSC and of the Steel Industry to better identify the effects of residuals on steel properties and to examine potential techniques able to control tramp elements during steelmaking operations. The project has been supported and orientated by a preliminary study, reviewing the relevant published data on the tramp element influence for long and flat products. The present report is devoted to overview available information on the effects of tramp elements and to describe the targets and the content of the European megaproject on scrap recycling.

  20. Enhancing the actinide sciences in Europe through hot laboratories networking and pooling: from ACTINET to TALISMAN

    SciTech Connect

    Bourg, S.; Poinssot, C.

    2013-07-01

    Since 2004, Europe supports the strengthening of the European actinides sciences scientific community through the funding of dedicated networks: (i) from 2004 to 2008, the ACTINET6 network of excellence (6. Framework Programme) gathered major laboratories involved in nuclear research and a wide range of academic research organisations and universities with the specific aims of funding and implementing joint research projects to be performed within the network of pooled facilities; (ii) from 2009 to 2013, the ACTINET-I3 integrated infrastructure initiative (I3) supports the cost of access of any academics in the pooled EU hot laboratories. In this continuation, TALISMAN (Trans-national Access to Large Infrastructures for a Safe Management of Actinides) gathers now the main European hot laboratories in actinides sciences in order to promote their opening to academics and universities and strengthen the EU-skills in actinides sciences. Furthermore, a specific focus is set on the development of advanced cutting-edge experimental and spectroscopic capabilities, the combination of state-of-the art experimental with theoretical first-principle methods on a quantum mechanical level and to benefit from the synergy between the different scientific and technical communities. ACTINET-I3 and TALISMAN attach a great importance and promote the Education and Training of the young generation of actinides scientists in the Trans-national access but also by organizing Schools (general Summer Schools or Theoretical User Lab Schools) or by granting students to attend International Conference on actinide sciences. (authors)

  1. IEA Energy conservation in the iron and steel industry. [US and Western Europe

    SciTech Connect

    Tunnah, B.G.

    1981-01-01

    The NATO Committee on the Challenges of Modern Society research program, under the auspices of the IEA, had the objectives of collecting data on material requirements and energy-consumption patterns in selected energy-intensive industries in the US and Western Europe, of identifying technologies and operating practices with the potential for energy conservation in those industries, and of recommending research projects that could lead to improved energy efficiency. The steel industry was selected for analysis and ideas for an international cooperative program were developed. Representatives from various countries conducted meetings and the form of an implementing agreement for a research and development program was finalized in December, 1980. The program includes three technical areas: hot-surface inspection, heat recovery, and coal gasification. Hot-surface inspection methods to be demonstrated are: optical, induction, electromagnetic ultrasonic, electromagnetic ultrasonic surface testing methods, and eddy current method for hot surface inspection and an infrared system (possibly). Three heat-recovery projects are: ceramic heat wheel development; demonstration of granular bed/heat pipe system for heat recovery; and demonstration of tubular ceramic recuperators. Processes in coal gasification are: converter process, gas treatment, and iron treatment. Each project is described in detail. (MCW)

  2. Variability and extremes of winter temperatures in Europe 1870-1980

    SciTech Connect

    Wallen, C.C.

    1986-01-01

    An attempt is made to study, by statistical treatment of surface observations, the fluctuations in variability of winter temperatures during the past century at eight selected European stations, four of them being considered as maritime and four continental in their location. Variability has been studied by three different parameters: interannual variability of winter months by consecutive decades from 1870-1980, intermonthly variability throughout the winters by consecutive decades from 1870-1980 and frequency of extreme values of monthly winter temperatures by consecutive decades from 1870-1980. Both interannual and intermonthly variability are shown to have been at a minimum during the decades of a strong climate maritimity in the beginning of this century (1900-1920) and at a maximum during the decades of transition (1930-1950) from the mild era in the first four decades of the century to a colder period. There is no clear indication that variability increased during the most recent decades although Moscow, the most eastern of the used stations, shows high variability in recent time. Extreme values seem to be increasing in frequency during recent decades in both maritime and continental parts of Europe although the maximum in frequency of extreme values occurred in the transition period 1930-1950.

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    4 Appendix H Table H18. World net hydroelectric electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 747 703 764 784 806 831 887 0.8 United States a 319 275 292 294 295 295 297 0.3 Canada 372 377 403 414 425 437 475 0.8 Mexico and Chile 57 51 68 76 86 99 114 2.9 OECD Europe 498 556 592 617 617 617 657 0.6 OECD Asia 128 115 127 131 135 143 153

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    2 Appendix H Table H6. World installed hydroelectric and other renewable generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 273 293 372 396 424 460 507 2.0 United States a 168 185 233 240 252 273 301 1.8 Canada 85 87 106 114 123 132 144 1.8 Mexico and Chile 20 21 34 42 48 55 62 3.9 OECD Europe 337 372 514 534 553 594 626 1.9 OECD Asia 54 57 115 129 145 153

  5. Fact #644: October 11, 2010 Share of Diesel Vehicle Sales Decline...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Germany and Italy have experienced the greatest declines in diesel vehicle sales, though ... western Europe for the countries France, Germany, Italy, and the United Kingdom from 1999 ...

  6. AllMerus Energy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    London, United Kingdom Zip: EC2V 7HQ Sector: Renewable Energy Product: MMC Energy Europe is a privately held energy asset development and acquisition company, focused...

  7. U.S. Energy Information Administration (EIA)

    Annual Energy Outlook

    natural gas exports to Western Europe in 2013 occurred in three countries - Italy, Germany, and the United Kingdom: Italy had the largest increase in natural gas pipeline...

  8. MPower Solutions | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Dundee,, United Kingdom Zip: DD2 4UH Product: MPower Solutions is one Europe's largest battery manufacturers supplying over 500,000 batteries every month. MPower provides optimised...

  9. Energy Performance Monitor | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Kingdom Cost: Paid OpenEI Keyword(s): Building Management, Building Systems, Compliance, Energy Management, Lighting, Reporting, Sustainability, Tools, Water Western Europe,...

  10. Appendix A: Reference case

    Annual Energy Outlook

    Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, and the United Kingdom. 3 Other Europe and Eurasia Albania, Armenia, Azerbaijan,...

  11. A decision-support system for sustainable urban metabolism in Europe

    SciTech Connect

    Gonzalez, Ainhoa; Donnelly, Alison; Jones, Mike; Chrysoulakis, Nektarios; Lopes, Myriam

    2013-01-15

    Urban metabolism components define the energy and material exchanges within a city and, therefore, can provide valuable information on the environmental quality of urban areas. Assessing the potential impact of urban planning alternatives on urban metabolism components (such as energy, water, carbon and pollutants fluxes) can provide a quantitative estimation of their sustainability performance. Urban metabolism impact assessment can, therefore, contribute to the identification of sustainable urban structures with regards, for example, to building types, materials and layout, as well as to location and capacity of transportation and infrastructural developments. In this way, it enables the formulation of planning and policy recommendations to promote efficient use of resources and enhance environmental quality in urban areas. The European FP7 project BRIDGE (sustainaBle uRban plannIng Decision support accountinG for urban mEtabolism) has developed a decision-support system (DSS) that systematically integrates urban metabolism components into impact assessment processes with the aim of accurately quantifying the potential effects of proposed planning interventions. The DSS enables integration of multiple spatial and non-spatial datasets (e.g. physical flows of energy and material with variables of social and economic change) in a systematic manner to obtain spatially defined assessment results and to thus inform planners and decision-makers. This multi-criteria approach also enables incorporation of stakeholders' perceptions in order to prioritise decisive assessment criteria. This paper describes the methodological framework used to develop the DSS and critically examines the results of its practical application in five European cities. - Highlights: Black-Right-Pointing-Pointer Urban metabolism in sustainability assessment of planning alternatives. Black-Right-Pointing-Pointer European FP7 project applied to 5 real life case studies across Europe. Black

  12. 135Cs/137Cs isotopic composition of environmental samples across Europe: Environmental transport and source term emission applications

    DOE PAGES [OSTI]

    Snow, Mathew S.; Snyder, Darin C.

    2015-11-02

    135Cs/137Cs isotopic analyses represent an important tool for studying the fate and transport of radiocesium in the environment; in this work the 135Cs/137Cs isotopic composition in environmental samples taken from across Europe is reported. Surface soil and vegetation samples from western Russia, Ukraine, Austria, and Hungary show consistent aged thermal fission product 135Cs/137Cs isotope ratios of 0.58 ± 0.01 (age corrected to 1/1/15), with the exception of one sample of soil-moss from Hungary which shows an elevated 135Cs/137Cs ratio of 1.78 ± 0.12. With the exception of the outlier sample from Hungary, surface soil/vegetation data are in quantitative agreement withmore » values previously reported for soils within the Chernobyl exclusion zone, suggesting that radiocesium at these locations is primarily composed of homogenous airborne deposition from Chernobyl. Seawater samples taken from the Irish Sea show 135Cs/137Cs isotope ratios of 1.22 ± 0.11 (age corrected to 1/1/15), suggesting aged thermal fission product Cs discharged from Sellafield. Furthermore, the differences in 135Cs/137Cs isotope ratios between Sellafield, Chernobyl, and global nuclear weapons testing fallout indicate that 135Cs/137Cs isotope ratios can be utilized to discriminate between and track radiocesium transport from different nuclear production source terms, including major emission sources in Europe.« less

  13. Comparison of the post-Chernobyl [sup 137]Cs contamination of mushrooms from eastern Europe, Sweden, and North America

    SciTech Connect

    Smith, M.L.; Taylor, H.W.; Sharma, H.D. )

    1993-01-01

    A comparison was made of 134Cs and 137Cs contamination in fungi from eastern Europe and eastern North America. Mean activities of 25 Ukrainian, 6 Swedish, and 10 North American collections were 4,660, 9,750, and 205 Bq/kg (dry weight), respectively. Additional measurements were made on samples from the Moscow, southern Belarus, and Yugoslavia/Bulgaria regions. Activity values were found to vary by several orders of magnitude within all geographic areas, even for the same mushroom species. Significantly higher specific activities were observed in mycorrhizal species than in saprophytic and parasitic fungi. Unfortunately, many of the European mycorrhizal species considered as prized edibles contained unacceptably high levels of 137Cs (> 1,000 Bq/kg [dry weight]) and should be used sparingly as food. By contrast, no mushrooms collected in Ontario or northern Michigan exceeded 1,000 Bq of 137Cs per kg (dry weight). The excessive 137Cs contamination was evident in mushrooms from areas that had substantial fallout from the 1986 accident in reactor 4 at the Chernobyl nuclear power station. However, observations suggest that about 20% of the 137Cs in eastern Europe (Moscow area, Belarus, and Ukraine) is of non-Chernobyl origin.

  14. OECD-International Platform on Policy Coherence for Development...

    OpenEI (Open Energy Information) [EERE & EIA]

    Area: Economic Development Topics: Co-benefits assessment Resource Type: Guidemanual, Lessons learnedbest practices, Technical report User Interface: Website Website:...

  15. Advanced power assessment for Czech lignite, Task 3.6, Part 2. The 2nd international conference on energy and environment: Transitions in East Central Europe

    SciTech Connect

    Sondreal, E.A.; Mann, M.D.; Weber, G.W.; Young, B.C.

    1995-12-01

    On November 1-5, 1994, the Energy & Environmental Research Center (EERC) and Power Research Institute of Prague cosponsored their second conference since 1991 in the Czech Republic, entitled ``Energy and Environment: Transitions in East Central Europe.`` This conference was a continuation of the EERC`s joint commitment, initiated in 1190, to facilitate solutions to short- and long-term energy and environmental problems in East Central Europe. Production of energy from coal in an environmentally acceptable manner is a critical issue facing East Central Europe, because the region continues to rely on coal as its primary energy source. The goal of the conference was to develop partnerships between industry, government, and the research community in East Central Europe and the United States to solve energy and environmental issues in a manner that fosters economic development. Among the topics addressed at the conference were: conventional and advanced energy generation systems; economic operation of energy systems; air pollution controls; power system retrofitting and repowering, financing options; regulatory issues; energy resource options; waste utilization and disposal; and long-range environmental issues. Selected papers in the proceedings have been processed separately for inclusion in the Energy Science and Technology database.

  16. Kingdom of Saudi Arabia Solar Radiation Atlas

    SciTech Connect

    NREL

    1998-12-16

    This atlas provides a record of monthly mean solar radiation generated by a Climatological Solar Radiation model, using quasi-climatological inputs of cloud cover, aerosol optical depth, precipitable water vapor, ozone, surface albedo, and atmospheric pressure.

  17. EM Leaders Continue United Kingdom Collaboration | Department...

    Office of Environmental Management (EM)

    ... and Supercompaction area, used for packaging low-level waste for storage; and the Prototype and Dounreay fast reactors, where the visitors considered decommissioning challenges. ...

  18. Hertfordshire, United Kingdom: Energy Resources | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    updating Image needs updating Reference needed Missing content Broken link Other Additional Comments Cancel Submit Categories: Places Stubs Articles with outstanding TODO tasks...

  19. United Kingdom Department for International Development | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Climate Change Resilience Framework Ecuador-Quito City Climate Change Action Plan El Salvador - National Climate Change Strategy Support Eldis Ethiopia-Strategic Climate...

  20. United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    EIA Natural Gas Reserves 292,000,000,000 Cubic Meters (cu m) 40 2010 CIA World Factbook Oil Reserves 3,084,000,000 Barrels (bbl) 31 2010 CIA World Factbook Energy Maps featuring...

  1. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    1. World energy consumption by country grouping, 2012-40 quadrillion Btu Region 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD 238 254 261 267 274 282 0.6 Americas 118 126 128 131 134 138 0.6 Europe 81 85 87 90 93 96 0.6 Asia 39 43 45 46 47 48 0.8 OECD with U.S. CPP 238 252 258 265 272 280 0.6 OECD Americas with U.S. CPP 118 124 125 128 132 136 0.5 Non-OECD 311 375 413 451 491 533 1.9 Europe and Eurasia 51 52 55 56 58 58 0.5 Asia 176 223 246 270 295 322 2.2 Middle East

  2. Evaluation of geological formations of Eastern Europe countries for raw disposal and elaboration of joint R&D programmes

    SciTech Connect

    Khrushchov, D.P.; Nigmatullin, N.S.; Balla, Z.

    1995-12-01

    The development of national R&D programmes on RAW management in the countries of East Europe is inevitably due to the fact that some of them (Ukraine, Russia, Slovakia, Bulgaria, Romania), have rather developed nuclear power industries, whereas some others are planning their development (Poland, Byelarus, Lithuania, etc.). The majority of East European countries have their own R&D programmes. The territories of these countries are situated within the limits of the East European geological platforms. As to RAW disposal these geological areas and consequently, the geological regions of East European countries are in very different condition. However, all the countries making use of nuclear power and other industries producing RAW, are facing a need to solve the problem of RAW disposal and to develop their own national programmes. Thus, the different geological environments for RAW disposal, which are extremely unfavorable in some countries, may be considered as a reason for joint R&D programmes initiation. The aim of these programmes is a detailed evaluation of geological formations and geological structure of East European countries as to RAW isolation in order to unite the efforts and to increase the efficiency of national R&D programmes as well as to ground subsequent joint actions related to RAW disposal.

  3. Case histories in the Europe/Africa area demonstrate improved capabilities of fiber-optic video camera technology

    SciTech Connect

    Olsen, J.E.; Kristensen, R.; Taylor, R.W.

    1995-10-01

    Cost constraints in the oilfield restrict the performance of remedial services unless a high probability of success can be assured. Unfortunately, a method that could accurately diagnose wellbore problems in a broad scope of oilfield environments was not available, and until the 90`s, accuracy of problem assessment was compromised to the point that estimates of remedial success could not be determined. During the 90`s, however, a downhole video system that showed promise of providing the sought-after diagnostic accuracy for today`s operational conditions was introduced to the oilfield. With the combined capabilities of fiber-optic signal transmission and downhole video camera technology, the system can now provide the oil and gas industry with a diagnostic tool that is rapidly becoming invaluable in oilfield services and is proving the worth of the old adage, seeing is believing. This paper will present a brief overview of the use of the downhole video (DHV) camera technique from its first documented usage until early 1992. The enhancements that have been instrumental in enlarging the scope of its usage since that time will then be discussed. Case histories recorded by the video camera operation in the Europe/Africa area will be presented and analyzed to demonstrate usage and benefits of the system.

  4. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    Chapter footnotes Preface 1. OECD includes all members of the organization as of January 1, 2016, in all the time series included in this report. Israel, which became a member in 2010, is included in OECD Europe for statistical reporting purposes. 2. Nonmarketed energy sources include selected energy consumption data for which the energy is not bought or sold, either directly or indirectly, as an input to marketed energy-particularly, traditional fuels such as fuelwood, charcoal, agricultural

  5. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A14. World population by region, Reference case, 2011-40 (millions) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 484 489 523 544 564 581 597 0.7 United States a 312 315 334 347 359 370 380 0.7 Canada 34 35 38 39 41 43 44 0.8 Mexico and Chile 137 139 151 158 164 169 173 0.8 OECD Europe 548 550 565 571 576 579 581

  6. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A8. World nuclear energy consumption by region, Reference case, 2011-40 (billion kilowatthours) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 888 867 902 891 901 900 924 0.2 United States a 790 769 804 808 808 812 833 0.3 Canada 88 89 86 72 72 67 62 -1.3 Mexico and Chile 9 8 12 12 20 20 29 4.5 OECD Europe 861 837

  7. Peer-to-Peer Consultations: Ancillary Services Peer Exchange with India: Experience from South Africa, Europe & the United States (Fact Sheet)

    SciTech Connect

    Not Available

    2014-05-01

    In support of national and subnational decision makers, the 21st Century Power Partnership regularly works with country partners to organize peer-to-peer consultations on critical issues. In March 2014, 21CPP collaborated with the Regulatory Assistance Project - India to host two peer-to-peer exchanges among experts from India, South Africa, Europe, and the United States to discuss the provision of ancillary services, particularly in the context of added variability and uncertainty from renewable energy. This factsheet provides a high level summary of the peer-to-peer consultation.

  8. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    30 Appendix J Table J4. World population by region, Reference case, 2011-2040 (millions) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 484 489 523 544 564 581 597 0.7 United States a 312 315 334 347 359 370 380 0.7 Canada 34 35 38 39 41 43 44 0.8 Mexico and Chile 137 139 151 158 164 169 173 0.8 OECD Europe 548 550 565 571 576 579 581 0.2 OECD Asia 203 204 207 208 208 207 206 0.0 Japan 127 127 125 123 120 117 114 -0.4 South

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    6 Appendix H Table H10. World installed solar generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 5 8 32 36 44 54 67 7.7 United States a 4 8 28 32 39 48 61 7.7 Canada 1 1 2 3 3 4 4 5.9 Mexico and Chile 0 0 2 2 2 2 3 14.4 OECD Europe 52 70 93 93 93 94 98 1.2 OECD Asia 7 9 45 51 57 59 60 6.9 Japan 5 7 38 43 48 49 49 7.4 South Korea 1 1 2 3 4 4 4 5.1 Australia

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    2 Appendix H Table H16. World net nuclear electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 888 867 902 891 901 900 924 0.2 United States a 790 769 804 808 808 812 833 0.3 Canada 88 89 86 72 72 67 62 -1.3 Mexico and Chile 9 8 12 12 20 20 29 4.5 OECD Europe 861 837 845 879 930 948 896 0.2 OECD Asia 304 161 381 437 457 450 427 3.5 Japan 156 17

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    8 Appendix H Table H2. World installed liquids-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 125 121 108 98 92 87 85 -1.2 United States a 105 101 89 80 75 71 70 -1.3 Canada 4 4 4 4 4 4 3 -1.0 Mexico and Chile 16 16 14 14 13 12 12 -1.0 OECD Europe 50 50 47 45 43 41 39 -0.9 OECD Asia 58 59 54 52 49 47 45 -1.0 Japan 52 52 49 46 44 42 40 -1.0 South

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    6 Appendix H Table H20. World net geothermal electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 22 21 37 49 64 75 85 5.0 United States a 15 16 27 39 52 62 70 5.5 Canada 0 0 0 0 0 0 0 - Mexico and Chile 7 6 10 10 11 13 15 3.5 OECD Europe 11 12 21 23 23 23 25 2.7 OECD Asia 9 9 17 18 20 22 25 3.9 Japan 3 3 3 3 3 3 3 0.1 South Korea 0 0 1 1 2 2 2

  13. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    8 Appendix H Table H22. World net other renewable electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 87 94 125 151 169 191 210 2.9 United States a 75 77 103 115 119 125 138 2.1 Canada 6 9 14 28 41 55 60 7.0 Mexico and Chile 6 8 8 8 9 11 13 1.8 OECD Europe 155 149 201 210 210 210 224 1.5 OECD Asia 28 37 60 71 80 84 87 3.1 Japan 23 33 38 44 50

  14. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    0 Appendix H Table H4. World installed coal-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 333 327 279 276 272 272 271 -0.7 United States a 314 308 263 260 260 260 260 -0.6 Canada 10 10 7 7 3 3 2 -5.2 Mexico and Chile 9 9 9 9 9 9 9 -0.2 OECD Europe 197 198 207 200 194 188 183 -0.3 OECD Asia 109 112 117 113 111 109 110 -0.1 Japan 50 50 49 47 46 44 43

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    4 Appendix H Table H8. World installed wind-powered generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 53 67 107 117 127 141 159 3.1 United States a 47 59 83 84 87 97 110 2.2 Canada 5 6 15 18 20 22 24 5.0 Mexico and Chile 1 2 9 16 19 22 25 10.1 OECD Europe 94 107 189 203 222 263 277 3.5 OECD Asia 6 6 24 29 37 40 44 7.2 Japan 2 3 3 5 8 8 8 4.1 South Korea 0 0

  16. Bical Biomass Industrial Crops Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Devon, United Kingdom Zip: EX15 1BJ Product: Developer and supplier of Miscanthus for electricity generation in Europe. Coordinates: 40.04563, -75.423824 Show Map Loading...

  17. Creating Coalitions to Accelerate Clean Energy Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Centre - Newburn Enterprise Centre High Street, Newburn Newcastle Upon Tyne, Tyne and Wear NE15 8LN United Kingdom +44 191-267-5724 Tel +44 191-229-0591 Fax infoEurope@ttcorp.com...

  18. Celt Power Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom Zip: SY16 1RB Sector: Wind energy Product: JV between Euros Energy Europe and ScottishPower to develop UK wind farms. References: Celt Power Ltd1 This article...

  19. 135Cs/137Cs isotopic composition of environmental samples across Europe: Environmental transport and source term emission applications

    SciTech Connect

    Snow, Mathew S.; Snyder, Darin C.

    2015-11-02

    135Cs/137Cs isotopic analyses represent an important tool for studying the fate and transport of radiocesium in the environment; in this work the 135Cs/137Cs isotopic composition in environmental samples taken from across Europe is reported. Surface soil and vegetation samples from western Russia, Ukraine, Austria, and Hungary show consistent aged thermal fission product 135Cs/137Cs isotope ratios of 0.58 ± 0.01 (age corrected to 1/1/15), with the exception of one sample of soil-moss from Hungary which shows an elevated 135Cs/137Cs ratio of 1.78 ± 0.12. With the exception of the outlier sample from Hungary, surface soil/vegetation data are in quantitative agreement with values previously reported for soils within the Chernobyl exclusion zone, suggesting that radiocesium at these locations is primarily composed of homogenous airborne deposition from Chernobyl. Seawater samples taken from the Irish Sea show 135Cs/137Cs isotope ratios of 1.22 ± 0.11 (age corrected to 1/1/15), suggesting aged thermal fission product Cs discharged from Sellafield. Furthermore, the differences in 135Cs/137Cs isotope ratios between Sellafield, Chernobyl, and global nuclear weapons testing fallout indicate that 135Cs/137Cs isotope ratios can be utilized to discriminate between and track radiocesium transport from different nuclear production source terms, including major emission sources in Europe.

  20. International Energy Outlook 2013

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Table F12. Delivered energy consumption in Other Non-OECD Europe and Eurasia by end-use sector and fuel, 2010-2040 ... Coal 0.1 0.1 0.1 0.1 0.1 0.1 0.1 -1.4 Electricity 0.5 0.5 0.6 0.7 ...

  1. Do land surface models need to include differential plant species responses to drought? Examining model predictions across a mesic-xeric gradient in Europe

    SciTech Connect

    De Kauwe, M. G.; Zhou, S. -X.; Medlyn, B. E.; Pitman, A. J.; Wang, Y. -P.; Duursma, R. A.; Prentice, I. C.

    2015-12-21

    Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact on the carbon, water and energy fluxes. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSM and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the most mesic sites, and low drought sensitivity at the most xeric sites, was necessary to accurately model responses during drought. Furthermore, our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.

  2. Do land surface models need to include differential plant species responses to drought? Examining model predictions across a mesic-xeric gradient in Europe

    DOE PAGES [OSTI]

    De Kauwe, M. G.; Zhou, S. -X.; Medlyn, B. E.; Pitman, A. J.; Wang, Y. -P.; Duursma, R. A.; Prentice, I. C.

    2015-12-21

    Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact on the carbon, water and energy fluxes. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSMmore » and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the most mesic sites, and low drought sensitivity at the most xeric sites, was necessary to accurately model responses during drought. Furthermore, our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.« less

  3. Fenix (Smart Grid Project) (United Kingdom) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    with realistic DER penetration; Development of a layered communication and control solution validated for a comprehensive set of network use cases , including normal...

  4. EM Renews Information-Sharing Agreement with United Kingdom's...

    Office of Environmental Management (EM)

    Florida International University's DOE Fellows gather for a photo with DOE Senior Advisor ... Florida International University's DOE Fellows gather for a photo with DOE Senior Advisor ...

  5. Kingdom of Saudi Arabia Ministry of Petroleum and Mineral Resources...

    OpenEI (Open Energy Information) [EERE & EIA]

    leaders and government ministers. The Supreme Council is responsible for petroleum and natural gas policy-making, including contract review. It also sets broad policies for the...

  6. The united kingdom's changing requirements for spent fuel storage

    SciTech Connect

    Hodgson, Z.; Hambley, D.I.; Gregg, R.; Ross, D.N.

    2013-07-01

    The UK is adopting an open fuel cycle, and is necessarily moving to a regime of long term storage of spent fuel, followed by geological disposal once a geological disposal facility (GDF) is available. The earliest GDF receipt date for legacy spent fuel is assumed to be 2075. The UK is set to embark on a programme of new nuclear build to maintain a nuclear energy contribution of 16 GW. Additionally, the UK are considering a significant expansion of nuclear energy in order to meet carbon reduction targets and it is plausible to foresee a scenario where up to 75 GW from nuclear power production could be deployed in the UK by the mid 21. century. Such an expansion, could lead to spent fuel storage and its disposal being a dominant issue for the UK Government, the utilities and the public. If the UK were to transition a closed fuel cycle, then spent fuel storage should become less onerous depending on the timescales. The UK has demonstrated a preference for wet storage of spent fuel on an interim basis. The UK has adopted an approach of centralised storage, but a 16 GW new build programme and any significant expansion of this may push the UK towards distributed spent fuel storage at a number of reactors station sites across the UK.

  7. London, United Kingdom: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Ltd ACF Ltd BMT Renewables Ltd BP Alternative Energy BP Plc Beetle Capital Partners BCP Biodiesel Energy Trading Limited Bioethanol Limited Biomass Fuels Ltd BFL Bloomberg New...

  8. Geobacter: The Junk Food Connoisseurs of the Bacterial Kingdom

    Energy.gov [DOE]

    With a healthy appetitie for uranium and petroleum, this family of bacteria clean up nuclear waste and other toxic materials. A team of researchers has discovered exactly how they use their arms to do this.

  9. HiperDNO (Smart Grid Project) (United Kingdom) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    is to develop a new generation of distribution network management systems that exploits novel near to realtime HPC solutions with inherent security and intelligent communications...

  10. United States-United Kingdom Collaboration on Fossil Energy R...

    Energy Saver

    in the field of cleaner coal technology, and for ... for advanced fossil energy power plant applications. ... Steam oxidation Boiler corrosion Gas turbines fired on ...

  11. Nuclear safety assistance to Russia, Ukraine, and Eastern Europe. Hearing before the Committee on Energy and Natural Resources, United States Senate, One Hundred Third Congress, First Session, October 28, 1993

    SciTech Connect

    1994-12-31

    The hearing addresses United States nuclear safety assistance to Russia, Ukraine and the nations of eastern europe operating Soviet-built nuclear powerplants. The primary issue is that Soviet-designed nuclear reactors bore almost no relation to the reactors designed and operated in Western countries. The Soviet reactors were devoid of safety features such as fire protection and containment. The absence of a safety culture and standardized operating procedures were also of great concern. The role and status of assistance by the United States in the future is discussed. Statements of government and industry officials are included, along with documents submitted for the record.

  12. Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

    SciTech Connect

    Ebert, D.

    1997-07-01

    This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts` meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items to be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes.

  13. OECD MCCI project enhancing instrumentation for reactor materials experiments, Rev. 0 September 3, 2002.

    SciTech Connect

    Lomperski, S.; Basu, S.

    2011-05-23

    Reactor safety experiments for studying the reactions of a molten core (corium) with water and/or concrete involve materials at extremely high temperature. Such high temperature severely restricts the types of sensors that can be employed to measure characteristics of the corium itself. Yet there is great interest in improving instrumentation so that the state of the melt can be established with more precision. In particular, it would be beneficial to increase both the upper range limit and accuracy of temperature measurements. The poor durability of thermocouples at high temperature is also an important issue. For experiments involving a water-quenched melt, direct measurements of the growth rate of the crust separating the melt and water would be of great interest. This is a key element in determining the nature of heat transfer between the melt and coolant. Despite its importance, no one has been able to directly measure the crust thickness during such tests. This paper considers three specialized sensors that could be introduced to enhance melt characterization: (1) A commercially fabricated, single point infrared temperature measurement with the footprint of a thermowell. A lens assembly and fiber optic cable linked to a receiver and amplifier measures the temperature at the base of a tungsten thermowell. The upper range limit is 3000 C and accuracy is {+-}0.25% of the reading. (2) In-house development of an ultrasonic temperature sensor that would provide multipoint measurements at temperatures up to {approx}3000 C. The sensors are constructed from tungsten rods and have a high temperature durability that is superior to that of thermocouples. (3) In-house development of an ultrasonic probe to measure the growth rate of the corium crust. This ultrasonic sensor would include a tungsten waveguide that transmits ultrasonic pulses up through the corium melt towards the crust and detects reflections from the melt/crust interface. A measurement of the echo time delay would provide the location of the interface. These three sensors would provide a considerable upgrade of the instrumentation used in our reactor materials tests. The infracouple is a commercial product that could provide an immediate improvement in temperature measurements. The sensor could also serve to corroborate thermocouple data by providing a measurement based upon a different physical principle. The ultrasonic temperature sensor would involve a greater investment and longer time frame than the infracouple, but offers all the advantages of the infracouple along with miniaturization and the ability to measure at multiple locations. In addition, the UTS is the platform from which we would begin development of the crust detector. Of the three sensors, the crust detector requires the most effort and entails the greatest uncertainty. However, a real-time crust thickness measurement has never before been made and such data would be unique and of great benefit to reactor materials experiments.

  14. OECD MCCI project Melt Eruption Test (MET) design report, Rev. 2. April 15, 2003.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. The Melt Coolability and Concrete Interaction (MCCI) program is pursuing separate effect tests to examine the viability of the melt coolability mechanisms identified as part of the MACE program. These mechanisms include bulk cooling, water ingression, volcanic eruptions, and crust breach. At the second PRG meeting held at ANL on 22-23 October 2002, a preliminary design1 for a separate effects test to investigate the melt eruption cooling mechanism was presented for PRG review. At this meeting, NUPEC made several recommendations on the experiment approach aimed at optimizing the chances of achieving a floating crust boundary condition in this test. The principal recommendation was to incorporate a mortar sidewall liner into the test design, since data from the COTELS experiment program indicates that corium does not form a strong mechanical bond with this material. Other recommendations included: (i) reduction of the electrode elevation to well below the melt upper surface elevation (since the crust may bond to these solid surfaces), and (ii) favorably taper the mortar liner to facilitate crust detachment and relocation during the experiment. Finally, as a precursor to implementing these modifications, the PRG recommended the development of a design for a small-scale scoping test intended to verify the ability of the mortar liner to preclude formation of an anchored bridge crust under core-concrete interaction conditions. This revised Melt Eruption Test (MET) plan is intended to satisfy these PRG recommendations. Specifically, the revised plan focuses on providing data on the extent of crust growth and melt eruptions as a function of gas sparging rate under well-controlled experiment conditions, including a floating crust boundary condition. The overall objective of MET is to determine to what extent core debris is rendered coolable by eruptive-type processes that breach the crust that rests upon the melt. The specific objectives of this test are as follows: (1) Evaluate the augmentation in surface heat flux during periods of melt eruption; (2) Evaluate the melt entrainment coefficient from the heat flux and gas flow rate data for input into models that calculate ex-vessel debris coolability; (3) Characterize the morphology and coolability of debris resulting from eruptive processes that transport melt into overlying water; and (4) Discriminate between periods when eruptions take the form of particle ejections into overlying water, leading to a porous particle bed, and single-phase extrusions, which lead to volcano-type structures.

  15. INL Results for Phases I and III of the OECD/NEA MHTGR-350 Benchmark...

    Office of Scientific and Technical Information (OSTI)

    is an important step in the code-to-code verification of modern prismatic VHTR codes. ... Country of Publication: United States Language: English Subject: 11 NUCLEAR FUEL CYCLE AND ...

  16. OECD NEA Benchmark Database of Spent Nuclear Fuel Isotopic Compositions for World Reactor Designs

    SciTech Connect

    Gauld, Ian C; Sly, Nicholas C; Michel-Sendis, Franco

    2014-01-01

    Experimental data on the isotopic concentrations in irradiated nuclear fuel represent one of the primary methods for validating computational methods and nuclear data used for reactor and spent fuel depletion simulations that support nuclear fuel cycle safety and safeguards programs. Measurement data have previously not been available to users in a centralized or searchable format, and the majority of accessible information has been, for the most part, limited to light-water-reactor designs. This paper describes a recent initiative to compile spent fuel benchmark data for additional reactor designs used throughout the world that can be used to validate computer model simulations that support nuclear energy and nuclear safeguards missions. Experimental benchmark data have been expanded to include VVER-440, VVER-1000, RBMK, graphite moderated MAGNOX, gas cooled AGR, and several heavy-water moderated CANDU reactor designs. Additional experimental data for pressurized light water and boiling water reactor fuels has also been compiled for modern assembly designs and more extensive isotopic measurements. These data are being compiled and uploaded to a recently revised structured and searchable database, SFCOMPO, to provide the nuclear analysis community with a centrally-accessible resource of spent fuel compositions that can be used to benchmark computer codes, models, and nuclear data. The current version of SFCOMPO contains data for eight reactor designs, 20 fuel assembly designs, more than 550 spent fuel samples, and measured isotopic data for about 80 nuclides.

  17. OECD/NEA Burnup Credit Calculational Criticality Benchmark Phase I-B Results

    SciTech Connect

    DeHart, M.D.

    1993-01-01

    Burnup credit is an ongoing technical concern for many countries that operate commercial nuclear power reactors. In a multinational cooperative effort to resolve burnup credit issues, a Burnup Credit Working Group has been formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. This working group has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide, and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods are in agreement to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods are within 11% agreement about the average for all fission products studied. Furthermore, most deviations are less than 10%, and many are less than 5%. The exceptions are {sup 149}Sm, {sup 151}Sm, and {sup 155}Gd.

  18. OECD/NEA burnup credit calculational criticality benchmark Phase I-B results

    SciTech Connect

    DeHart, M.D.; Parks, C.V.; Brady, M.C.

    1996-06-01

    In most countries, criticality analysis of LWR fuel stored in racks and casks has assumed that the fuel is fresh with the maximum allowable initial enrichment. This assumption has led to the design of widely spaced and/or highly poisoned storage and transport arrays. If credit is assumed for fuel burnup, initial enrichment limitations can be raised in existing systems, and more compact and economical arrays can be designed. Such reliance on the reduced reactivity of spent fuel for criticality control is referred to as burnup credit. The Burnup Credit Working Group, formed under the auspices of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development, has established a set of well-defined calculational benchmarks designed to study significant aspects of burnup credit computational methods. These benchmarks are intended to provide a means for the intercomparison of computer codes, methods, and data applied in spent fuel analysis. The benchmarks have been divided into multiple phases, each phase focusing on a particular feature of burnup credit analysis. This report summarizes the results and findings of the Phase I-B benchmark, which was proposed to provide a comparison of the ability of different code systems and data libraries to perform depletion analysis for the prediction of spent fuel isotopic concentrations. Results included here represent 21 different sets of calculations submitted by 16 different organizations worldwide and are based on a limited set of nuclides determined to have the most important effect on the neutron multiplication factor of light-water-reactor spent fuel. A comparison of all sets of results demonstrates that most methods agree to within 10% in the ability to estimate the spent fuel concentrations of most actinides. All methods agree within 11% about the average for all fission products studied. Most deviations are less than 10%, and many are less than 5%. The exceptions are Sm 149, Sm 151, and Gd 155.

  19. Natural gas information 1996 (1997 edition)

    SciTech Connect

    1997-09-16

    A detailed reference work on gas supply and demand covering not only the OECD countries but also the rest of the world, this publication contains essential information on LNG and pipeline trade, gas reserves, storage capacity, and prices. The main part of the book concentrates on OECD countries, showing a detailed gas supply and demand balance for each country and for three OECD regions: North America, Europe, and Asia-Pacific, as well as a breakdown of gas consumption by end-user. Import and export data are reported by source and destination. Also included are maps of the pipeline systems in 25 IEA countries and information on their ownership and operations, transit of gas, regulatory features, and transportation tariffs.

  20. Buildings Energy Data Book: 1.4 Environmental Data

    Buildings Energy Data Book

    6 World Carbon Dioxide Emissions Nation/Region 1990 2000 2010 1990-2000 2000-2010 China 2270 2850 8262 26% 2.3% 11.2% United States 5041 5862 5644 18% 1.5% -0.4% OECD Europe 4128 4191 4094 13% 0.2% -0.2% Other Non-OECD Asia 827 1339 1872 6% 4.9% 3.4% Russia (1) 3821 1556 1632 5% -8.6% 0.5% Middle East 730 1094 1692 5% 4.1% 4.5% India 579 1003 1602 5% 5.7% 4.8% Central & S. America 716 992 1150 4% 3.3% 1.5% Japan 1047 1201 1090 3% 1.4% -1.0% Africa 726 887 1107 4% 2.0% 2.2% Oth. Non-OECD

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    8 Appendix H Table H12. World total net electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 5,071 5,017 5,449 5,724 6,036 6,359 6,727 1.1 United States a 4,102 4,055 4,351 4,513 4,691 4,860 5,056 0.8 Canada 627 616 692 748 809 880 958 1.6 Mexico and Chile 342 346 406 463 535 618 713 2.6 OECD Europe 3,455 3,483 3,858 4,090 4,328 4,590 4,889 1.2

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    0 Appendix H Table H14. World net natural gas-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,234 1,446 1,396 1,600 1,840 2,048 2,237 1.6 United States a 1,014 1,228 1,117 1,223 1,371 1,478 1,569 0.9 Canada 61 63 97 136 187 230 272 5.3 Mexico and Chile 160 154 182 240 282 340 396 3.4 OECD Europe 766 645 655 746 905 1,056 1,321 2.6

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    6 Appendix A Table A11. World carbon dioxide emissions from liquids use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,881 2,838 2,861 2,812 2,785 2,794 2,812 0.0 United States a 2,291 2,240 2,269 2,227 2,182 2,163 2,147 -0.2 Canada 289 291 291 289 290 295 304 0.2 Mexico and Chile 301 307 301 296 313 335 361 0.6 OECD Europe 1,969 1,903 1,823 1,804

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    Reference case projections Table A12. World carbon dioxide emissions from natural gas use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,666 1,715 1,766 1,849 1,965 2,063 2,167 0.8 United States a 1,305 1,363 1,394 1,432 1,497 1,538 1,586 0.5 Canada 205 205 213 234 261 287 310 1.5 Mexico and Chile 156 147 158 184 207 238 271 2.2 OECD Europe 1,016 970

  5. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    8 Appendix A Table A13. World carbon dioxide emissions from coal use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,000 1,779 1,931 1,947 1,912 1,901 1,896 0.2 United States a 1,876 1,657 1,824 1,840 1,822 1,808 1,804 0.3 Canada 68 68 53 54 36 38 33 -2.5 Mexico and Chile 56 54 53 53 54 55 58 0.3 OECD Europe 1,208 1,251 1,228 1,244 1,219 1,195 1,178

  6. WRF-Chem model predictions of the regional impacts of N2O5 heterogeneous processes on night-time chemistry over north-western Europe

    DOE PAGES [OSTI]

    Lowe, Douglas; Archer-Nicholls, Scott; Morgan, Will; Allan, James D.; Utembe, Steve; Ouyang, Bin; Aruffo, Eleonora; Le Breton, Michael; Zaveri, Rahul A.; di Carlo, Piero; et al

    2015-02-09

    Chemical modelling studies have been conducted over north-western Europe in summer conditions, showing that night-time dinitrogen pentoxide (N2O5) heterogeneous reactive uptake is important regionally in modulating particulate nitrate and has a~modest influence on oxidative chemistry. Results from Weather Research and Forecasting model with Chemistry (WRF-Chem) model simulations, run with a detailed volatile organic compound (VOC) gas-phase chemistry scheme and the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) sectional aerosol scheme, were compared with a series of airborne gas and particulate measurements made over the UK in July 2010. Modelled mixing ratios of key gas-phase species were reasonably accurate (correlationsmore » with measurements of 0.7–0.9 for NO2 and O3). However modelled loadings of particulate species were less accurate (correlation with measurements for particulate sulfate and ammonium were between 0.0 and 0.6). Sulfate mass loadings were particularly low (modelled means of 0.5–0.7 μg kg−1air, compared with measurements of 1.0–1.5 μg kg−1air). Two flights from the campaign were used as test cases – one with low relative humidity (RH) (60–70%), the other with high RH (80–90%). N2O5 heterogeneous chemistry was found to not be important in the low-RH test case; but in the high-RH test case it had a strong effect and significantly improved the agreement between modelled and measured NO3 and N2O5. When the model failed to capture atmospheric RH correctly, the modelled NO3 and N2O5 mixing ratios for these flights differed significantly from the measurements. This demonstrates that, for regional modelling which involves heterogeneous processes, it is essential to capture the ambient temperature and water vapour profiles. The night-time NO3 oxidation of VOCs across the whole region was found to be 100–300 times slower than the daytime OH oxidation of these compounds. The difference in contribution was less for

  7. International Energy Outlook 2013

    Annual Energy Outlook

    Appendix F Table F6. Delivered energy consumption in OECD Europe by end-use sector and fuel, 2010-2040 ... Coal 0.8 0.7 0.7 0.7 0.6 0.6 0.5 -1.3 Electricity 3.3 3.8 4.1 4.4 4.6 4.8 5.0 ...

  8. Regional trends in the take-up of clean coal technologies

    SciTech Connect

    Wootten, J.M.

    1997-12-31

    Using surveys of the electricity industry taken in major OECD coal producing/coal consuming regions of North America, Europe, Southern Africa, and Asia/Pacific, this paper reports on the attitudes of power plant operators and developers toward clean coal technologies, the barriers to their use and the policies and measures that might be implemented, if a country or region desired to encourage greater use of clean coal technologies.

  9. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    6, 2015 | Release date: May 7, 2015 | Next release: May 14, 2015 | Previous weeks JUMP TO: In The News | Overview | Prices/Supply/Demand | Storage In the News: Northwest Europe doubles LNG imports as key prices converge Liquefied natural gas (LNG) shipped to northwestern Europe's regasification terminals in the United Kingdom (U.K.), Belgium, and the Netherlands more than doubled in the first quarter of 2015, compared with the same period in 2014, as reduced demand and decreasing spot prices in

  10. Appendix A: Reference case projections

    Energy Information Administration (EIA) (indexed site)

    30 Appendix A Table A5. World liquids consumption by region, Reference case, 2011-40 (million barrels per day) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 23.6 23.2 24.4 24.4 24.3 24.4 24.6 0.2 United States a 18.9 18.5 19.6 19.6 19.4 19.3 19.3 0.2 Canada 2.3 2.4 2.4 2.4 2.4 2.4 2.5 0.2 Mexico and Chile 2.4 2.4 2.4 2.4 2.5 2.7 2.9 0.6 OECD Europe 14.5 14.1 13.7 13.6 13.7 13.8 14.0 0.0 OECD Asia 7.9 8.2 7.7 7.5 7.5 7.5

  11. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    1. World natural gas production by region and country in the Reference case, 2012-40 trillion cubic feet Region/country 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD United Statesa 24.0 28.7 30.4 32.9 34.0 35.3 1.4 Canada 6.1 5.8 6.6 7.2 7.9 8.6 1.2 Europe 10.3 8.7 9.1 10.1 11.1 11.9 0.5 Australia/New Zealand 2.1 3.3 4.2 5.0 5.9 7.0 4.4 Other OECD 1.9 1.4 1.7 2.2 2.8 3.6 2.3 Total OECD 44.4 47.9 52.0 57.4 61.9 66.4 1.4 Non-OECD Russia 21.8 21.9 23.4 25.9 29.3 31.8 1.4

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    8 Appendix J Table J2. World energy intensity by region, Reference case, 2011-40 (thousand Btu per 2010 dollar of GDP) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6.5 6.2 5.4 4.8 4.4 4.0 3.7 -1.9 United States a 6.4 6.1 5.4 4.8 4.3 3.9 3.5 -2.0 Canada 10.4 10.2 8.9 8.3 7.8 7.5 7.1 -1.3 Mexico and Chile 4.2 4.0 3.4 3.1 2.9 2.8 2.7 -1.4 OECD Europe 4.4 4.4 3.9 3.7 3.5 3.3 3.2 -1.1 OECD Asia 5.7 5.5 5.4 5.3 5.1 4.9 4.8 -0.5

  13. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    2 Appendix A Table A7. World coal consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 21.0 18.7 20.3 20.5 20.1 20.0 20.0 0.2 United States a 19.6 17.3 19.2 19.3 19.2 19.0 19.0 0.3 Canada 0.7 0.7 0.6 0.6 0.4 0.4 0.4 -2.5 Mexico and Chile 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.3 OECD Europe 12.9 13.4 13.2 13.3 13.1 12.8 12.6 -0.2 OECD Asia 9.7 9.7 10.2 10.1 10.1 10.1 10.1 0.1

  14. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    4 Appendix A Table A9. World consumption of hydroelectricity and other renewable energy by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 13.1 12.9 15.6 16.6 17.5 18.6 20.3 1.6 United States a 7.9 7.7 9.3 9.7 9.9 10.4 11.3 1.4 Canada 4.3 4.2 4.8 5.1 5.5 5.8 6.3 1.4 Mexico and Chile 0.9 1.0 1.5 1.8 2.1 2.4 2.7 3.7 OECD Europe 10.7 11.5 15.7 16.7 17.3 18.5 19.6 1.9 OECD Asia

  15. JPRS report: Nuclear developments, [January 13, 1989

    SciTech Connect

    1989-01-13

    This report contains information concerning the nuclear developments of the following countries: (1) Canada, (2) China, (3) Brazil, (4) Near East and South Asia; Egypt, India, (5) Soviet Union, and (6) West Europe; Federal Republic of Germany, Ireland, Sweden, United Kingdom.

  16. Results of a Quality Assurance Review of External Beam Radiation Therapy in the International Society of Paediatric Oncology (Europe) Neuroblastoma Group's High-risk Neuroblastoma Trial: A SIOPEN Study

    SciTech Connect

    Gaze, Mark N.; Boterberg, Tom; Dieckmann, Karin; Hoermann, Marcus; Gains, Jennifer E.; Sullivan, Kevin P.; Ladenstein, Ruth

    2013-01-01

    Purpose: Radiation therapy is important for local control in neuroblastoma. This study reviewed the compliance of plans with the radiation therapy guidelines of the International Society of Paediatric Oncology (Europe) Neuroblastoma Group (SIOPEN) High-Risk Trial protocol. Methods and Materials: The SIOPEN trial central electronic database has sections to record diagnostic imaging and radiation therapy planning data. Individual centers may upload data remotely, but not all centers involved in the trial chose to use this system. A quality scoring system was devised based on how well the radiation therapy plan matched the protocol guidelines, to what extent deviations were justified, and whether adverse effects may result. Central review of radiation therapy planning was undertaken retrospectively in 100 patients for whom complete diagnostic and treatment sets were available. Data were reviewed and compared against protocol guidelines by an international team of radiation oncologists and radiologists. For each patient in the sample, the central review team assigned a quality assurance score. Results: It was found that in 48% of patients there was full compliance with protocol requirements. In 29%, there were deviations for justifiable reasons with no likely long-term adverse effects resulting. In 5%, deviations had occurred for justifiable reasons, but that might result in adverse effects. In 1%, there was a deviation with no discernible justification, which would not lead to long-term adverse events. In 17%, unjustified deviations were noted, with a risk of an adverse outcome resulting. Conclusions: Owing to concern over the proportion of patients in whom unjustified deviations were observed, a protocol amendment has been issued. This offers the opportunity for central review of radiation therapy plans before the start of treatment and the treating clinician a chance to modify plans.

  17. Developing financeable projects in Central Europe

    SciTech Connect

    Chelberg, R.; Prerad, V.

    1995-12-01

    POWER`s engineering and development experience in the Czech Republic creating financeable projects within the power generation industry will be presented. POWER has been involved in the Czech Republic`s privatization process, environmental legislation as well as formation of the regulatory environment. Strategic methods for accomplishing the development of financeable projects often include ownership and financial restructuring of the projects. This is done by utilizing internal cash flows, external debt and equity placement (provided by international financial institutions) by restructuring the facility`s contractual relationships and operations (providing as least cost solution to engineering) and possibly using existing governmental guarantees. In order to make any recommendations on how to come into compliance with the country`s environmental legislation, it is necessary to begin with an analysis of the existing facility. This involves preparation of technical and economic feasibility study, evaluation of technology and preliminary engineering solutions. It further involves restructuring of power sales agreements, heat sales agreements, and fuel supply agreements. The goal is to provide suitable security for the equity and debt financing participants by mitigating risk and creating a single purpose business unit with predictable life and economics.

  18. GE Global Research Europe in Munich, Germany

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Smart Ways to Build Smart Things direct write2square The GE Store for Technology is Open for Business be an engineer Women Engineers Urge Young Girl to Pursue Engineering

  19. Coal waste materials applications in Europe

    SciTech Connect

    Niel, E.M.M.G.

    1997-12-31

    European countries have built up a tradition of coal burning activities. It is a well known fact that in the past twenty five years economic and technological growth was accompanied by more awareness for the protection of the environment. Therefore, increasing attention was paid to emission of hazardous gases, dust disposal and the proper reuse of coal residues. Both government and industry were searching for reasonable solutions to fight the rising environmental threats. It is noticed that the utilization situation in the different European countries varies considerably due to different historical, geographic and economic conditions. Nevertheless about 45% of the nearly 60 million tonnes of coal combustion by-products produced in European power plants are utilized, mainly in construction, civil engineering and the mining industry. In all European countries where electric energy is provided by coal fired power plants three parties are involved: (1) the power plants, as producers and owners of the coal fly ashes; (2) the consumers, which use the ashes in building products and construction; and (3) the government, mainly in watching over environmental and health aspects. This paper describes the use of fly ash in cements and concretes in European countries and the regulations on the use of fly ash.

  20. Energie Europe Service | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    firm that develops, finances and operates PV systems as well as biomass and biogas projects. Coordinates: 48.85693, 2.3412 Show Map Loading map......

  1. WORKSHOP ?PHYSICS FOR HEALTH IN EUROPE?

    ScienceCinema

    None

    2011-10-06

    2-4 February 2010 at CERN This event will be will be available live via the Webcast Service and transmitted in parallel to:IT auditorium,Salle Anderssen 40-S2-A01(Tuesday 2nd February)BE auditorium (all day), Salle 40-S2-01 (only between 08:00- 14:00) (Wednesday 3rd February)BE auditorium, Salle Curie 40-S2-C01(Thursday 4th February)

  2. Diesel Particulate Filters: Market Introducution in Europe |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications A New Active DPF System for "Stop and Go" Duty-Cycle Vehicles French perspective on diesel engines & emissions Diesel Particulate Filter: A Success ...

  3. WORKSHOP ?PHYSICS FOR HEALTH IN EUROPE?

    ScienceCinema

    None

    2011-10-06

    2-4 February 2010 at CERN This event will be will be available live via the Webcast Service and transmitted in parallel to:IT auditorium, Salle Anderssen 40-S2-A01(Tuesday 2nd February)BE auditorium (all day), Salle 40-S2-01 (only between 08:00- 14:00) (Wednesday 3rd February)BE auditorium, Salle Curie 40-S2-C01(Thursday 4th February)   

  4. OECD 2-D Core Concrete Interaction (CCI) tests : CCI-2 test plan, Rev. 0 January 31, 2004.

    SciTech Connect

    Farmer, M. T.; Kilsdonk, D. J.; Lomperski, S.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. The first of these two tests, CCI-1, was conducted on December 19, 2003. This test investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % calcined siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The second of these two planned tests, CCI-2, will be conducted with a nearly identical test facility and experiment boundary conditions, but with a Limestone/Common Sand (LCS) concrete test section to investigate the effect of concrete type on the two-dimensional core-concrete interaction and debris cooling behavior. The objective of this report is to provide the overall test plan for CCI-2 to enable pretest calculations to be carried out. The report begins by providing a summary description of the CCI-2 test apparatus, followed by a description of the planned test operating procedure. Overall specifications for CCI-2 are provided in Table 1-1.

  5. OECD MCCI Small-Scale Water Ingression and Crust Strength tests (SSWICS) design report, Rev. 2 October 31, 2002.

    SciTech Connect

    Farmer, M.; Lomperski, S.; Kilsdonk, D.; Aeschlimann, B.; Pfeiffer, P.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. However, due to the integral nature of these tests, several questions regarding the crust freezing behavior could not be adequately resolved. These questions include: (1) To what extent does water ingression into the crust increase the melt quench rate above the conduction-limited rate and how is this affected by melt composition and system pressure and (2) What is the fracture strength of the corium crust when subjected to a thermal-mechanical load and how does it depend upon the melt composition? A series of separate-effects experiments are planned to address these issues. The first employs an apparatus designed to measure the quench rate of a pool of corium ({approx}{phi}30 cm; up to 20 cm deep). The main parameter to be varied in these quench tests is the melt composition since it is thought to have a critical influence on the crust cracking behavior which, in turn, alters quench rate. A description of the test apparatus, instrumentation, data reduction, and test matrix are the subject of the first portion of this report. The issue of crust strength will be addressed with a second apparatus designed to mechanically load the crust produced by the quench tests. This apparatus will measure the fracture strength of the crust while under a thermal load created by a heating element beneath the crust. The introduction of a thermal gradient across the crust is thought to be important for these tests because of uncertainty in the magnitude of the thermal stresses and thus their relative importance in the crust fracture mechanism at plant scale. The second half of this report describes the apparatus for measuring crust strength. The two apparatuses used to measure the melt quench rate and crust strength are jointly referred to as SSWICS (Small-Scale Water Ingression and Crust Strength).

  6. OECD MCCI project long-term 2-D molten core concrete interaction test design report, Rev. 0. September 30, 2002.

    SciTech Connect

    Farmer, M. T.; Kilsdonk, D. J.; Lomperski, S.; Aeschliman, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following two technical objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of the first program objective, the Small-Scale Water Ingression and Crust Strength (SSWICS) test series has been initiated to provide fundamental information on the ability of water to ingress into cracks and fissures that form in the debris during quench, thereby augmenting the otherwise conduction-limited heat transfer process. A test plan for Melt Eruption Separate Effects Tests (MESET) has also been developed to provide information on the extent of crust growth and melt eruptions as a function of gas sparging rate under well-controlled experiment conditions. In terms of the second program objective, the project Management Board (MB) has approved startup activities required to carry out experiments to address remaining uncertainties related to long-term two-dimensional molten core-concrete interaction. In particular, for both wet and dry cavity conditions, there is uncertainty insofar as evaluating the lateral vs. axial power split during a core-concrete interaction due to a lack of experiment data. As a result, there are differences in the 2-D cavity erosion predicted by codes such as MELCOR, WECHSL, and COSACO. The first step towards generating this data is to produce a test plan for review by the Project Review Group (PRG). The purpose of this document is to provide this plan.

  7. Consistent Comparison of the Codes RELAP5/PARCS and TRAC-M/PARCS for the OECD MSLB Coupled Code Benchmark

    SciTech Connect

    Kozlowski, Tomasz; Miller, R. Matthew; Downar, Thomas J.; Barber, Douglas A.; Joo, Han Gyu

    2004-04-15

    A generalized interface module was developed for coupling any thermal-hydraulic code to any spatial kinetic code. In the design used here the thermal-hydraulic and spatial kinetic codes function as independent processes and communicate using the Parallel Virtual Machine software. This approach helps maximize flexibility while minimizing modifications to the respective codes. Using this interface, the U.S. Nuclear Regulatory Commission (NRC) three-dimensional neutron kinetic code, Purdue Advanced Reactor Core Simulator (PARCS), has been coupled to the NRC system analysis codes RELAP5 and Modernized Transient Reactor Analysis Code (TRAC-M). Consistent comparison of code results for the Organization for Economic Cooperation and Development/Nuclear Energy Agency main steam line break benchmark problem using RELAP5/PARCS and TRAC-M/PARCS was made to assess code performance.

  8. Simulation of the OECD Main-Steam-Line-Break Benchmark Exercise 3 Using the Coupled RELAP5/PANTHER Codes

    SciTech Connect

    Schneidesch, Christophe R.; Zhang Jinzhao

    2004-04-15

    The RELAP5 best-estimate thermal-hydraulic system code has been coupled with the PANTHER three-dimensional neutron kinetics code via the TALINK dynamic data exchange control and processing tool. The coupled RELAP5/PANTHER code package has been qualified and will be used at Tractebel Engineering (TE) for analyzing asymmetric pressurized water reactor (PWR) accidents with strong core-system interactions. The Organization for Economic Cooperation and Development/U.S. Nuclear Regulatory Commission PWR main-steam-line-break benchmark problem was analyzed as part of the qualification efforts to demonstrate the capability of the coupled code package of simulating such transients. This paper reports the main results of TE's contribution to the benchmark Exercise 3.

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    2 Appendix I Table I2. World tight gas, shale gas and coalbed methane production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 19.8 26.0 29.0 31.4 34.3 37.0 2.3 United States a 16.6 22.1 23.9 25.1 26.5 27.8 1.9 Canada 3.3 3.8 4.9 5.5 6.3 7.0 2.8 Mexico 0.0 0.1 0.3 0.8 1.4 2.2 - Chile 0.0 0.0 0.0 0.0 0.0 0.0 - OECD Europe 0.0 0.5 1.7 3.3 4.6 5.5 21.8 North Europe 0.0 0.5

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    4 Appendix I Table I4. World net trade in natural gas by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 0.3 -2.6 -4.0 -5.4 -6.2 -6.9 - United States a 1.5 -2.6 -3.5 -4.8 -5.2 -5.6 - Canada -2.3 -1.9 -2.3 -2.4 -2.7 -2.8 0.7 Mexico 1.0 1.7 1.7 1.6 1.5 1.3 1.1 Chile 0.1 0.1 0.1 0.2 0.2 0.2 1.7 OECD Europe 7.8 10.9 11.9 12.7 13.0 14.0 2.1 North Europe 2.4 5.2 5.9 6.1 6.1 6.3 3.5

  11. WRF-Chem model predictions of the regional impacts of N2O5 heterogeneous processes on night-time chemistry over north-western Europe

    SciTech Connect

    Lowe, Douglas; Archer-Nicholls, Scott; Morgan, Will; Allan, James D.; Utembe, Steve; Ouyang, Bin; Aruffo, Eleonora; Le Breton, Michael; Zaveri, Rahul A.; di Carlo, Piero; Percival, Carl; Coe, H.; Jones, Roderic L.; McFiggans, Gordon

    2015-02-09

    Chemical modelling studies have been conducted over north-western Europe in summer conditions, showing that night-time dinitrogen pentoxide (N2O5) heterogeneous reactive uptake is important regionally in modulating particulate nitrate and has a~modest influence on oxidative chemistry. Results from Weather Research and Forecasting model with Chemistry (WRF-Chem) model simulations, run with a detailed volatile organic compound (VOC) gas-phase chemistry scheme and the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) sectional aerosol scheme, were compared with a series of airborne gas and particulate measurements made over the UK in July 2010. Modelled mixing ratios of key gas-phase species were reasonably accurate (correlations with measurements of 0.7–0.9 for NO2 and O3). However modelled loadings of particulate species were less accurate (correlation with measurements for particulate sulfate and ammonium were between 0.0 and 0.6). Sulfate mass loadings were particularly low (modelled means of 0.5–0.7 μg kg−1air, compared with measurements of 1.0–1.5 μg kg−1air). Two flights from the campaign were used as test cases – one with low relative humidity (RH) (60–70%), the other with high RH (80–90%). N2O5 heterogeneous chemistry was found to not be important in the low-RH test case; but in the high-RH test case it had a strong effect and significantly improved the agreement between modelled and measured NO3 and N2O5. When the model failed to capture atmospheric RH correctly, the modelled NO3 and N2O5 mixing ratios for these flights differed significantly from the measurements. This demonstrates that, for regional modelling which involves heterogeneous processes, it is essential to capture the ambient temperature and water vapour profiles.

    The night-time NO

  12. Price of Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Dollars

    Energy Information Administration (EIA) (indexed site)

    per Thousand Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2010 -- -- -- -- -- -- -- -- -- -- 6.79 7.32 2011 7.66 -- -- -- -- -- -- -- -- -- -- -- 2012 -- -- -- -- -- -- -- -- -- -- -- -- 2013 -- -- -- -- -- -- -- -- -- -- -- -- 2014 -- -- -- -- -- -- -- -- -- -- -- -- 2015 -- -- -- -- -- -- -- -- -- -- -- -- 2016 -- -- -- --

  13. Strategic environmental assessment (SEA) for wind energy planning: Lessons from the United Kingdom and Germany

    SciTech Connect

    Phylip-Jones, J. Fischer, T.B.

    2015-01-15

    This paper reports on SEA applied in the wind energy sector in the UK and Germany. Based on a review of 18 SEAs, it is found that the quality of SEA documentation is variable, with over a third of them being deemed unsatisfactory. Furthermore, SEA processes are conducted to varying degrees of effectiveness, with scoping a strength but impact prediction and mitigation weaknesses. Generally speaking, the influence of SEA on German wind energy plan making was found to be low and the influence of SEA on UK plans deemed to be moderate. The German plans had a low influence mainly because of a perceived high environmental performance of the underlying plans in the first instance. Substantive outcomes of SEA are not always clear and the influence of SEA on decision making is said to be limited in many cases. Finally, a lack of effective tiering between SEA and project level EIA is also observed. In addition, our findings echo some of the weaknesses of SEA practice found in previous studies of SEA effectiveness, including poor impact prediction and significance sections and a lack of detailed monitoring programmes for post plan implementation.

  14. Code System For Risk Assessment From Underground Radioactive Waste Disposal In the United Kingdom.

    Energy Science and Technology Software Center

    2000-04-18

    Version 00 The SYVAC D/2 program simulates the ground water mediated movement of radionuclides from underground facilities for the disposal of low and intermediate level wastes to the accessible environment, and provides an estimate of the subsequent radiological risk to man. The simulated timescales are usually within the range 1.0E+03 to 1.0E+07 years. SYVAC is capable of modelling both shallow disposal facilities (located in argillaceous media and overlaying an aquifer) and deep disposal facilities (inmore » a saturated environment). The software was developed for use within the UK Department of the Environment (DOE) Radioactive Waste Management Programme, as one tool in the DOE Assessment Methodology. The acronym SYVAC (System Variability Analysis Code for deep and shallow burial of radioactive waste) comes from the name of an assessment code originally obtained from the Atomic Energy of Canada (AECL) in 1982, which was found to be inappropriate for geological conditions in the UK. The development of the previous version, SYVAC A/C, was undertaken by the following private installations under UK Department of the Environment (DOE) contracts: Atkins Research & Development, Epsom, Surrey, England; Associated Nuclear Services, Epsom, Surrey, England; CAP Scientific, London, England; Electrowatt Engineering Services, Horsham, West Sussex, England; and Scicon Limited, Wavendon, Milton Kenes, England.« less

  15. U.S. Department of Energy Welcomes the United Kingdom as 21st...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    GNEP, a voluntary international partnership, aims to safely and securely expand nuclear power worldwide while responsibly managing nuclear waste and reducing proliferation risks. ...

  16. Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million Cubic

    Energy Information Administration (EIA) (indexed site)

    Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2010 0 0 0 0 0 0 0 0 0 0 3,379 6,206 2011 2,862 0 0 0 0 0 0 0 0 0 0 0 2012 0 0 0 0 0 0 0 0 0 0 0 0 2013 0 0 0 0 0 0 0 0 0 0 0 0 2014 0 0 0 0 0 0 0 0 0 0 0 0 2015 0 0 0 0 0 0 0 0 0 0 0 0 2016 0 0 0 0

  17. Development Of Strategy For The Management Of LLW In The United Kingdom

    SciTech Connect

    Wareing, A.S.; Fisher, J.

    2008-07-01

    The Nuclear Decommissioning Authority (NDA) is a UK non-departmental public body with a remit to clean up the civil public sector nuclear legacy. Much work has been done to date on developing contractor competition for the management of NDA-owned sites, including the UK's principal disposal facility: the Low Level Waste Repository (LLWR) in Cumbria. The competition goals and principles are integrated with the framework for the development of a UK Low Level Waste (LLW) management plan, through which the NDA will deliver its commitments to UK Government and stakeholders. Nexia Solutions has undertaken work for the NDA in assessing strategic options and scenarios for the management and disposal of current UK LLW. The volumetric, radiological and strategic limitations of existing disposition routes have been assessed against the inventories and characteristics of LLW forecast to arise. A number of potential alternative scenarios and variants for future LLW management have been modelled and assessed. (authors)

  18. Price of Liquefied U.S. Natural Gas Exports to United Kingdom...

    Annual Energy Outlook

    Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's -- -- -- 2010's 7.13 7.66...

  19. Price of Liquefied U.S. Natural Gas Re-Exports to United Kingdom...

    Energy Information Administration (EIA) (indexed site)

    Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's -- -- -- 2010's 7.13 7.66 --...

  20. Price of Liquefied U.S. Natural Gas Exports to United Kingdom...

    Gasoline and Diesel Fuel Update

    Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2010 -- -- -- -- -- -- -- -- -- -- 6.79 7.32 2011 7.66 -- -- -- -- -- -- -- --...

  1. The Greening of the Middle Kingdom: The Story of Energy Efficiency in China

    SciTech Connect

    Levine, Mark D.; Zhou, Nan; Price, Lynn

    2009-05-01

    The dominant image of China's energy system is of billowing smokestacks from the combustion of coal. More heavily dependent on coal than any other major country, China uses it for about 70 percent of its energy (NBS, 2008). Furthermore, until recently, China had very few environmental controls on emissions from coal combustion; recent efforts to control sulfur dioxide (SO{sub 2}) emissions appear to be meeting with some success (Economy, 2007, 2009). Figure 1 shows the dominant use of coal in China's energy system from 1950 to 1980 (NBS, various years). However, this is just one side of China's energy story. Figure 2 illustrates the second part, and what may be the most important part of the story - China's energy system since 1980, shortly after Deng Xiaoping assumed full leadership. This figure compares the trends in energy consumption and gross domestic product (GDP) by indexing both values to 100 in 1980. The upper line shows what energy consumption in China would have been if it had grown at the same rate as GDP, since energy consumption usually increases in lockstep with GDP in an industrializing, developing country, at least until it reaches a high economic level. The lower line in Figure 2 shows China's actual energy consumption, also indexed to 1980. The striking difference between the lines shows that GDP in China grew much faster than energy demand from 1980 to 2002. As a result, by 2002 energy and energy-related carbon dioxide (CO{sub 2}) emissions were more than 40% percent of what they would have been if energy and GDP had grown in tandem. In the next chapter of China's energy history, from 2002 to 2005, the increase in energy demand outstripped a very rapidly growing economy, and because of the large size of the Chinese economy, the increase had substantial impacts. The construction of power plants increased to 100 gigawatts per year; over the three-year period newly constructed plants had a capacity of more than 30 percent of total electricity-generation capacity in the United States. At the same time, energy-related CO{sub 2} emissions in China increased dramatically. In the latest stage, another abrupt change, this time for the better in terms of energy efficiency, began late in 2005. As senior officials in the government turned their attention to the problem of growing energy demand, the government set a mandatory goal for 2010 of a 20 percent reduction in energy intensity (defined as energy use per unit of GDP) from 2005 levels. To meet this goal, China undertook significant legislative, regulatory, and organizational reforms at the national, provincial, and municipal levels to ensure that measures to reduce energy intensity would be implemented in all sectors and activities in China. At the time of this writing, it appears that China is on its way to meeting the 20 percent goal, thus reducing CO{sub 2} emissions by 1.5 billion tones, as compared with consumption at 2005 energy-intensity levels. In this paper, we describe and assess these three significant periods in China's energy story and provide a context by briefly reviewing the three decades prior to 1980.

  2. Diagnostic experiments at a 3 MeV test stand at Rutherford Appleton Laboratory (United Kingdom)

    SciTech Connect

    Gabor, C.; Faircloth, D. C.; Lawrie, S. R.; Letchford, A. P.; Lee, D. A.; Pozimski, J. K.

    2010-02-15

    A front end is currently under construction consisting of a H{sup -} Penning ion source (65 keV, 60 mA), low energy beam transport (LEBT), and radio frequency quadrupole (3 MeV output energy) with a medium energy beam transport suitable for high power proton applications. Diagnostics can be divided either in destructive techniques such as beam profile monitor, pepperpot, slit-slit emittance scanner (preferably used during commissioning) or nondestructive, permanently installed devices such as photodetachment-based techniques. Another way to determine beam distributions is a scintillator with charge-coupled device camera. First experiments have been performed to control the beam injection into the LEBT. The influence of beam parameters such as particle energy and space-charge compensation on the two-dimensional distribution and profiles will be presented.

  3. An assessment of using oil shale for power production in the Hashemite Kingdom of Jordan

    SciTech Connect

    Hill, L.J.; Holcomb, R.S.; Petrich, C.H.; Roop, R.D.

    1990-11-01

    This report addresses the oil shale-for-power-production option in Jordan. Under consideration are 20- and 50-MW demonstration units and a 400-MW, commercial-scale plant with, at the 400-MW scale, a mining operation capable of supplying 7.8 million tonnes per year of shale fuel and also capable of disposal of up to 6.1 million tonnes per year of wetted ash. The plant would be a direct combustion facility, burning crushed oil shale through use of circulating fluidized bed combustion technology. The report emphasizes four areas: (1) the need for power in Jordan, (2) environmental aspects of the proposed oil shale-for-power plant(s), (3) the engineering feasibility of using Jordan's oil shale in circulating fluidized bed combustion (CFBC) boiler, and (4) the economic feasibility of the proposed plant(s). A sensitivity study was conducted to determine the economic feasibility of the proposed plant(s) under different cost assumptions and revenue flows over the plant's lifetime. The sensitivity results are extended to include the major extra-firm benefits of the shale-for-power option: (1) foreign exchange savings from using domestic energy resources, (2) aggregate income effects of using Jordan's indigenous labor force, and (3) a higher level of energy security. 14 figs., 47 tabs.

  4. A Resurgence of United Kingdom Nuclear Power Research (2011 EFRC Forum)

    ScienceCinema

    Grimes, Robin W. (Imperial College, London, UK)

    2016-07-12

    Robin W. Grimes, Professor at Imperial College, London,was the third speaker in the the May 26, 2011 EFRC Forum session, "Global Perspectives on Frontiers in Energy Research." In his presentation, Professor Grimes discussed recent research endeavors in advanced nuclear energy systems being pursued in the UK. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several “grand challenges” and use-inspired “basic research needs” recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

  5. Price Liquefied Sabine Pass, LA Natural Gas Exports Price to United Kingdom

    Energy Information Administration (EIA) (indexed site)

    (Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's -- -- -- 2010's 6.93 7.66 -- -- -- --

  6. Price Liquefied Sabine Pass, LA Natural Gas Exports Price to United Kingdom

    Energy Information Administration (EIA) (indexed site)

    (Dollars per Thousand Cubic Feet) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2011 7.66

  7. Energy implications of the thermal recovery of biodegradable municipal waste materials in the United Kingdom

    SciTech Connect

    Burnley, Stephen; Phillips, Rhiannon; Coleman, Terry; Rampling, Terence

    2011-09-15

    Highlights: > Energy balances were calculated for the thermal treatment of biodegradable wastes. > For wood and RDF, combustion in dedicated facilities was the best option. > For paper, garden and food wastes and mixed waste incineration was the best option. > For low moisture paper, gasification provided the optimum solution. - Abstract: Waste management policies and legislation in many developed countries call for a reduction in the quantity of biodegradable waste landfilled. Anaerobic digestion, combustion and gasification are options for managing biodegradable waste while generating renewable energy. However, very little research has been carried to establish the overall energy balance of the collection, preparation and energy recovery processes for different types of wastes. Without this information, it is impossible to determine the optimum method for managing a particular waste to recover renewable energy. In this study, energy balances were carried out for the thermal processing of food waste, garden waste, wood, waste paper and the non-recyclable fraction of municipal waste. For all of these wastes, combustion in dedicated facilities or incineration with the municipal waste stream was the most energy-advantageous option. However, we identified a lack of reliable information on the energy consumed in collecting individual wastes and preparing the wastes for thermal processing. There was also little reliable information on the performance and efficiency of anaerobic digestion and gasification facilities for waste.

  8. Interpreting, correlating, and predicting the multimedia concentrations of PCDD/Fs in the United Kingdom

    SciTech Connect

    Cole, J.G.; Mackay, D.; Jones, K.C.; Alcock, R.E.

    1999-02-01

    Reported concentrated of 17 polychlorinated dibenzo-p-dioxin and furan congeners or congener groups in ten environmental media of the UK have been compiled. The relative equilibrium status of each congener is deduced with respect to its concentration in urban air which is regarded as the primary source of multimedia contamination. This is accomplished by calculating the equilibrium lipid partitioning (ELP) concentration for each congener and medium using partitioning information derived from measured physical chemical properties. It is shown that the extents of departure from equilibrium conditions between media are consistent for all congeners except the octa-chlorinated compounds. This method of analyzing monitoring data and the consistency of intermedia ELP concentration ratios facilitates the interpretation of the fate and levels of these persistent chemicals in a multimedia environment and yields an approximate predictive capability by which levels in one medium can be used to estimate levels in other media. Benefits of this ELP concentration approach are discussed as a means of enhancing the more complete and detailed interpretation of monitoring data for persistent compounds.

  9. Liquefied U.S. Natural Gas Re-Exports to United Kingdom (Million Cubic

    Energy Information Administration (EIA) (indexed site)

    Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's 0 0 0 2010's 9,584 2,862

  10. DLC+VIT4IP (Smart Grid Project) (United Kingdom) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    applications. These shall include the existing power distribution network for novel services in smart electricity distribution networks such as demand side management,...

  11. Appendix A. Reference case projections

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9.7 15.3 15.2 14.2 13.8 13.5 1.2 Canada 3.4 3.6 3.7 5.4 6.4 7.3 7.8 8.0 2.7 Mexico and Chile 3.0 3.0 3.0 3.1 3.4 3.7 3.9 4.2 1.1 OECD Europe 4.9 4.6 4.3 3.3 3.2 3.2 3.2 3.4 -1.0...

  12. Appendix A. Reference case projections

    Gasoline and Diesel Fuel Update

    9.7 13.6 12.9 11.7 11.2 10.6 0.4 Canada 3.4 3.6 3.7 4.7 5.1 5.5 5.7 5.8 1.6 Mexico and Chile 3.0 3.0 3.0 2.4 2.0 2.0 2.1 2.2 -1.0 OECD Europe 4.9 4.6 4.3 3.1 2.9 2.5 2.4 2.5 -2.0...

  13. Microsoft PowerPoint - Sweetnam NG Disc Slides - April 7 2010 final.ppt [Compatibility Mode]

    Gasoline and Diesel Fuel Update

    Gas: U.S. Markets in a Global Context 2010 Energy Conference U.S. Energy Information Administration Johns Hopkins University - SAIS p y April 7, 2010 - Washington, DC Natural Gas: U.S. Markets is a Global Context, April 7, 2010 Richard Newell, March 2, 2010 1 Richard Newell, SAIS, December 14, 2009 1 April 7, 2010 Washington, DC Discussion Outline * Setting the context * Demand/supply outlook for 3 regions - United States United States - OECD Europe - China * Evolution of the global gas market -

  14. International energy outlook 1995, May 1995

    SciTech Connect

    1995-06-01

    The International Energy Outlook 1995 (IEO95) presents an assessment by the Energy Information Administration (EIA) of the international energy market outlook through 2010. The report is an extension of the EIA`s Annual Energy Outlook 1995 (AEO95), which was prepared using the National Energy Modeling System (NEMS). US projections appearing in the IEO95 are consistent with those published in the AEO95. IEO95 is provided as a statistical service to energy managers and analysts, both in government and in the private sector. The projects are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Department of energy Organization Act of 1977 (Public Law 95-91), Section 295(c). The IEO95 projections are based on US and foreign government policies in effect on October 1, 1994. IEO95 displays projections according to six basic country groupings. The regionalization has changed since last year`s report. Mexico has been added to the Organization for Economic Cooperation and Development (OECD), and a more detailed regionalization has been incorporated for the remainder of the world, including the following subgroups: non-OECD Asia, Africa, Middle East, and Central and South America. China is included in non-OECD Asia. Eastern Europe and the former Soviet Union are combined in the EE/FSU subgroup.

  15. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    Coal Exports by Country of Destination Total and Europe, 1960-2011 By Selected Country, 2011 By Selected Country, 1960-2011 206 U.S. Energy Information Administration / Annual Energy Review 2011 Source: Table 7.5. 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005 2010 0 25 50 75 100 125 Million Short Tons lands 10.8 8.7 6.9 6.9 6.8 5.6 4.8 Nether- Brazil United Japan Canada Italy Germany 0 2 4 6 8 10 12 Million Short Tons Kingdom Total Europe 1960 1965 1970 1975 1980 1985 1990 1995 2000 2005

  16. International petroleum statistics report

    SciTech Connect

    1996-03-01

    This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  17. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    2. World gross domestic product by country grouping, 2012-40 billion 2010 U.S. dollars, purchasing power parity Region 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD 44,769 52,921 58,772 64,731 71,026 78,042 2.0 Americas 19,080 23,390 26,557 29,942 33,569 37,770 2.5 Europe 18,638 21,496 23,621 25,697 27,809 30,074 1.7 Asia 7,051 8,034 8,575 9,091 9,647 10,198 1.3 Non-OECD 49,686 72,195 90,118 109,979 132,734 158,789 4.2 Europe and Eurasia 5,535 6,614 7,764 9,009 10,437

  18. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    2. World petroleum and other liquid fuels consumption by region, IEO2016 Reference case, 1990-2040 million barrels per barrel Average annual percent change Region 1990 2000 2012 2020 2030 2040 1990-2012 2012-40 OECD 42.2 48.7 45.5 45.8 45.5 46.1 0.3 0.0 Americas 20.6 24.3 23.2 24.4 24.3 24.6 0.5 0.2 Europe 14.0 15.6 14.1 13.7 13.7 14.0 0.0 0.0 Asia 7.6 8.8 8.2 7.7 7.5 7.5 0.4 -0.3 Non-OECD 25.0 29.0 44.8 54.5 63.6 74.8 2.7 1.9 Europe and Eurasia 9.3 4.4 5.3 5.8 6.2 6.1 -2.5 0.5 Asia 6.6 12.5

  19. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    6. Table 6-1. Annual average percent change in commercial sector delivered energy consumption by region percent per year Average annual percent change Region 2012-20 2020-30 2030-40 2012-40 OECD 1.6 0.9 0.8 1.1 Americas 1.1 0.8 1 0.9 Europe 1.9 1.2 0.8 1.3 Asia 2.4 0.9 0.6 1.2 Non-OECD 3 2.5 1.9 2.4 Europe and Eurasia 2.1 1.5 0.9 1.4 Asia 3.7 2.9 2.1 2.9 Middle East 2.4 2.5 2 2.3 Africa 3.3 3.1 3.1 3.2 Americas 2.1 1.9 1.7 1.9 Total World 2.1 1.5 1.2 1.6 Source: EIA, World Energy Projection

  20. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update

    U.S. Energy Information Administration (EIA) WHAT DRIVES CRUDE OIL PRICES? An analysis of 7 factors that influence oil markets, with chart data updated monthly and quarterly Overview Supply non-OECD Supply non-OECD Balance Balance Demand non-OECD Demand non-OECD Spot Prices Spot Prices Supply OECD Supply OECD Financial Markets Financial Markets Demand OECD Demand OECD Financial Markets Market participants not only buy and sell physical quantities of oil, but also trade contracts for the

  1. ENV-Linkages General Equilibrium Model | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Topics: Co-benefits assessment Resource Type: Softwaremodeling tools Website: www.oecd.orgofficialdocumentsdisplaydocumentpdf?coteECOWKP(2008)6 References: OECD1...

  2. OECD MCCI Small-Scale Water Ingression and Crust Strength Tests (SSWICS) SSWICS-3 test data report : thermal Hydraulic results, Rev. 0 February 19, 2003.

    SciTech Connect

    Lomperski, S.; Farmer, M. T.; Kilsdonk, D.; Aeschlimann, B.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. However, due to the integral nature of these tests, several questions regarding the crust freezing behavior could not be adequately resolved. These questions include: (1) To what extent does water ingression into the crust increase the melt quench rate above the conduction-limited rate and how is this affected by melt composition and system pressure and (2) What is the fracture strength of the corium crust when subjected to a thermal-mechanical load and how does it depend upon the melt composition? A series of separate-effects experiments are being conducted to address these issues. The first employs an apparatus designed to measure the quench rate of a pool of corium ({approx}{phi}30 cm; up to 20 cm deep). The main parameter to be varied in these quench tests is the melt composition since it is thought to have a critical influence on the crust cracking behavior which, in turn, alters quench rate. The issue of crust strength will be addressed with a second apparatus designed to mechanically load the crust produced by the quench tests. This apparatus will measure the fracture strength of the crust while under a thermal load created by a heating element beneath the crust. The two apparatuses used to measure the melt quench rate and crust strength are jointly referred to as SSWICS (Small-Scale Water Ingression and Crust Strength). This report describes results of the third water ingression test, designated SSWICS-3. This test investigated the quenching behavior of a fully oxidized PWR corium melt containing 8 wt% limestone/common sand concrete at a system pressure of 4 bar absolute. The report includes a description of the test apparatus, the instrumentation used, plots of the recorded data, and some rudimentary data reduction to obtain an estimate of the heat flux from the corium to the overlying water pool.

  3. OECD MMCI 2-D Core Concrete Interaction (CCI) tests : CCCI-1 test data report-thermalhydraulic results. Rev 0 January 31, 2004.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten coreconcrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-1 experiment, which was conducted on December 19, 2003. Test specifications for CCI-1 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % calcined siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-1 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. The posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  4. OECD MMCI Small-Scale Water Ingression and Crust Strength tests (SSWICS) SSWICS-1 final data report, Rev. 1 February 10, 2003.; Report, Rev. 1

    SciTech Connect

    Lomperski, S.; Farmer, M. T.; Kilsdonk, D.; Aeschlimann, B.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. However, due to the integral nature of these tests, several questions regarding the crust freezing behavior could not be adequately resolved. These questions include: (1) To what extent does water ingression into the crust increase the melt quench rate above the conduction-limited rate and how is this affected by melt composition and system pressure; and (2) What is the fracture strength of the corium crust when subjected to a thermal-mechanical load and how does it depend upon the melt composition? A series of separate-effects experiments are being conducted to address these issues. The first employs an apparatus designed to measure the quench rate of a pool of corium ({approx}{phi}30 cm; up to 20 cm deep). The main parameter to be varied in these quench tests is the melt composition since it is thought to have a critical influence on the crust cracking behavior which, in turn, alters quench rate. The issue of crust strength will be addressed with a second apparatus designed to mechanically load the crust produced by the quench tests. This apparatus will measure the fracture strength of the crust while under a thermal load created by a heating element beneath the crust. The two apparatuses used to measure the melt quench rate and crust strength are jointly referred to as SSWICS (Small-Scale Water Ingression and Crust Strength). This report describes results of the first water ingression test, designated SSWICS-1. The test investigated the quench behavior of a 15 cm deep, fully oxidized PWR corium melt containing 8 wt% limestone/common sand concrete decomposition products. The melt was quenched at nominally atmospheric pressure. The report includes a description of the test apparatus, the instrumentation used, plots of the recorded data, and data reduction to obtain an estimate of the corrected heat flux from the corium to the overlying water pool. A section of the report is devoted to calculations of the conduction-limited heat flux that accounts for heat losses to the crucible holding the corium. The remainder of the report describes post test examinations of the crust, which includes permeability and mechanical strength measurements, and chemical analysis.

  5. OECD MCCI 2-D Core Concrete Interaction (CCI) tests : CCI-2 test data report-thermalhydraulic results, Rev. 0 October 15, 2004.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of two long-term 2-D Core-Concrete Interaction (CCI) experiments designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-2 experiment, which was conducted on August 24, 2004. Test specifications for CCI-2 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 400 kg PWR core melt, initially containing 8 wt % Limestone/Common Sand (LCS) concrete, with a specially designed two-dimensional LCS concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The report begins by providing a summary description of the CCI-2 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. Detailed posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  6. OECD MCCI project 2-D Core Concrete Interaction (CCI) tests : CCI-3 test data report-thermalhydraulic results. Rev. 0 October 15, 2005.

    SciTech Connect

    Farmer, M. T.; Lomperski, S.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program addressed the issue of the ability of water to cool and thermally stabilize a molten core-concrete interaction when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. As a follow-on program to MACE, The Melt Coolability and Concrete Interaction Experiments (MCCI) project is conducting reactor material experiments and associated analysis to achieve the following objectives: (1) resolve the ex-vessel debris coolability issue through a program that focuses on providing both confirmatory evidence and test data for the coolability mechanisms identified in MACE integral effects tests, and (2) address remaining uncertainties related to long-term two-dimensional molten core-concrete interactions under both wet and dry cavity conditions. Achievement of these two program objectives will demonstrate the efficacy of severe accident management guidelines for existing plants, and provide the technical basis for better containment designs for future plants. In terms of satisfying these objectives, the Management Board (MB) approved the conduct of a third long-term 2-D Core-Concrete Interaction (CCI) experiment designed to provide information in several areas, including: (i) lateral vs. axial power split during dry core-concrete interaction, (ii) integral debris coolability data following late phase flooding, and (iii) data regarding the nature and extent of the cooling transient following breach of the crust formed at the melt-water interface. This data report provides thermal hydraulic test results from the CCI-3 experiment, which was conducted on September 22, 2005. Test specifications for CCI-3 are provided in Table 1-1. This experiment investigated the interaction of a fully oxidized 375 kg PWR core melt, initially containing 15 wt% siliceous concrete, with a specially designed two-dimensional siliceous concrete test section with an initial cross-sectional area of 50 cm x 50 cm. The sand and aggregate constituents for this particular siliceous concrete were provided by CEA as an in-kind contribution to the program. The report begins by providing a summary description of the CCI-3 test apparatus and operating procedures, followed by presentation of the thermal-hydraulic results. Detailed posttest debris examination results will be provided in a subsequent publication. Observations drawn within this report regarding the overall cavity erosion behavior may be subject to revision once the posttest examinations are completed, since these examinations will fully reveal the final cavity shape.

  7. OECD MMCI Small-Scale Water Ingression and Crust Strength Tests (SSWICS) SSWICS-2 test data report : thermal hydraulic results, Rev. 0 September 20, 2002.

    SciTech Connect

    Lomperski, S.; Farmer, M. T.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. However, due to the integral nature of these tests, several questions regarding the crust freezing behavior could not be adequately resolved. These questions include: (1) To what extent does water ingression into the crust increase the melt quench rate above the conduction-limited rate and how is this affected by melt composition and system pressure and (2) What is the fracture strength of the corium crust when subjected to a thermal-mechanical load and how does it depend upon the melt composition? A series of separate-effects experiments are being conducted to address these issues. The first employs an apparatus designed to measure the quench rate of a pool of corium ({approx}{phi}30 cm; up to 20 cm deep). The main parameter to be varied in these quench tests is the melt composition since it is thought to have a critical influence on the crust cracking behavior which, in turn, alters quench rate. The issue of crust strength will be addressed with a second apparatus designed to mechanically load the crust produced by the quench tests. This apparatus will measure the fracture strength of the crust while under a thermal load created by a heating element beneath the crust. The two apparatuses used to measure the melt quench rate and crust strength are jointly referred to as SSWICS (Small-Scale Water Ingression and Crust Strength). This report describes results of the second water ingression test, designated SSWICS-2. The report includes a description of the test apparatus, the instrumentation used, plots of the recorded data, and some rudimentary data reduction to obtain an estimate of the heat flux from the corium to the overlying water pool.

  8. OECD MCCI project Small-Scale Water Ingression and Crust Strength Tests (SSWICS) SSWICS-1 test data report : thermal hydraulic results. Rev. 0 September 20, 2002.

    SciTech Connect

    Lomperski, S.; Farmer, M. T.; Kilsdonk, D. J.; Aeschlimann, R. W.; Basu, S.

    2011-05-23

    The Melt Attack and Coolability Experiments (MACE) program at Argonne National Laboratory addressed the issue of the ability of water to cool and thermally stabilize a molten core/concrete interaction (MCCI) when the reactants are flooded from above. These tests provided data regarding the nature of corium interactions with concrete, the heat transfer rates from the melt to the overlying water pool, and the role of noncondensable gases in the mixing processes that contribute to melt quenching. However, due to the integral nature of these tests, several questions regarding the crust freezing behavior could not be adequately resolved. These questions include: (1) To what extent does water ingression into the crust increase the melt quench rate above the conduction-limited rate and how is this affected by melt composition and system pressure and (2) What is the fracture strength of the corium crust when subjected to a thermal-mechanical load and how does it depend upon the melt composition? A series of separate-effects experiments are being conducted to address these issues. The first employs an apparatus designed to measure the quench rate of a pool of corium ({approx}{phi}30 cm; up to 20 cm deep). The main parameter to be varied in these quench tests is the melt composition since it is thought to have a critical influence on the crust cracking behavior which, in turn, alters quench rate. The issue of crust strength will be addressed with a second apparatus designed to mechanically load the crust produced by the quench tests. This apparatus will measure the fracture strength of the crust while under a thermal load created by a heating element beneath the crust. The two apparatuses used to measure the melt quench rate and crust strength are jointly referred to as SSWICS (Small-Scale Water Ingression and Crust Strength). This report describes results of the first water ingression test, designated SSWICS-1. The report includes a description of the test apparatus, the instrumentation used, plots of the recorded data, and some rudimentary data reduction to obtain an estimate of the heat flux from the corium to the overlying water pool.

  9. Evaluation of select heat and pressure measurement gauges for potential use in the NRC/OECD High Energy Arc Fault (HEAF) test program.

    SciTech Connect

    Lopez, Carlos; Wente, William Baker; Figueroa, Victor G.

    2014-01-01

    In an effort to improve the current state of the art in fire probabilistic risk assessment methodology, the U.S. Nuclear Regulatory Commission, Office of Regulatory Research, contracted Sandia National Laboratories (SNL) to conduct a series of scoping tests to identify thermal and mechanical probes that could be used to characterize the zone of influence (ZOI) during high energy arc fault (HEAF) testing. For the thermal evaluation, passive and active probes were exposed to HEAF-like heat fluxes for a period of 2 seconds at the SNLs National Solar Thermal Test Facility to determine their ability to survive and measure such an extreme environment. Thermal probes tested included temperature lacquers (passive), NANMAC thermocouples, directional flame thermometers, modified plate thermometers, infrared temperature sensors, and a Gardon heat flux gauge. Similarly, passive and active pressure probes were evaluated by exposing them to pressures resulting from various high-explosive detonations at the Sandia Terminal Ballistic Facility. Pressure probes included bikini pressure gauges (passive) and pressure transducers. Results from these tests provided good insight to determine which probes should be considered for use during future HEAF testing.

  10. Analysis of the OECD/NRC BWR Turbine Trip Transient Benchmark with the Coupled Thermal-Hydraulics and Neutronics Code TRAC-M/PARCS

    SciTech Connect

    Lee, Deokjung; Downar, Thomas J.; Ulses, Anthony; Akdeniz, Bedirhan; Ivanov, Kostadin N.

    2004-10-15

    An analysis of the Peach Bottom Unit 2 Turbine Trip 2 (TT2) experiment has been performed using the U.S. Nuclear Regulatory Commission coupled thermal-hydraulics and neutronics code TRAC-M/PARCS. The objective of the analysis was to assess the performance of TRAC-M/PARCS on a BWR transient with significance in two-phase flow and spatial variations of the neutron flux. TRAC-M/PARCS results are found to be in good agreement with measured plant data for both steady-state and transient phases of the benchmark. Additional analyses of four fictitious extreme scenarios are performed to provide a basis for code-to-code comparisons and comprehensive testing of the thermal-hydraulics/neutronics coupling. The obtained results of sensitivity studies on the effect of direct moderator heating on transient simulation indicate the importance of this modeling aspect.

  11. Using the OECD/NRC Pressurized Water Reactor Main Steam Line Break Benchmark to Study Current Numerical and Computational Issues of Coupled Calculations

    SciTech Connect

    Ivanov, Kostadin N.; Todorova, Nadejda K.; Sartori, Enrico

    2003-05-15

    Incorporating full three-dimensional (3-D) models of the reactor core into system transient codes allows for a 'best-estimate' calculation of interactions between the core behavior and plant dynamics. Recent progress in computer technology has made the development of coupled thermal-hydraulic (T-H) and neutron kinetics code systems feasible. Considerable efforts have been made in various countries and organizations in this direction. Appropriate benchmarks need to be developed that will permit testing of two particular aspects. One is to verify the capability of the coupled codes to analyze complex transients with coupled core-plant interactions. The second is to test fully the neutronics/T-H coupling. One such benchmark is the Pressurized Water Reactor Main Steam Line Break (MSLB) Benchmark problem. It was sponsored by the Organization for Economic Cooperation and Development, U.S. Nuclear Regulatory Commission, and The Pennsylvania State University. The benchmark problem uses a 3-D neutronics core model that is based on real plant design and operational data for the Three Mile Island Unit 1 nuclear power plant. The purpose of this benchmark is threefold: to verify the capability of system codes for analyzing complex transients with coupled core-plant interactions; to test fully the 3-D neutronics/T-H coupling; and to evaluate discrepancies among the predictions of coupled codes in best-estimate transient simulations. The purposes of the benchmark are met through the application of three exercises: a point kinetics plant simulation (exercise 1), a coupled 3-D neutronics/core T-H evaluation of core response (exercise 2), and a best-estimate coupled core-plant transient model (exercise 3).In this paper we present the three exercises of the MSLB benchmark, and we summarize the findings of the participants with regard to the current numerical and computational issues of coupled calculations. In addition, this paper reviews in some detail the sensitivity studies on exercises 2 and 3 performed by the benchmark team using the coupled code TRAC-PF1/NEM. The purpose of these supporting studies was to aid participants in developing their models.

  12. NREL Selected to Join Europe's DERlab - News Releases | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Integration Facility (ESIF), which will house research for overcoming barriers to adding ... and development of distributed energy and smart grid projects in the world," NREL Director ...

  13. Head of UN Economic Commission for Europe: "Capture the Carbon"

    Office of Energy Efficiency and Renewable Energy (EERE)

    The increased urgency of global climate change has focused the attention of many leaders around the world. While the Department of Energy remains a global leader in carbon capture and storage (CCS) research and development, CCS has grown in prominence as one international solution to an "all-of-the-above" problem.

  14. New sister Interoperability Center opens in Europe | Argonne...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    As electric vehicle sales continue to rise around the world, the European Union opened the first European Interoperability Center for Electric Vehicles and Smart Grids last month ...

  15. Category:Smart Grid Projects in Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    group":"","inlineLabel":"","visitedicon":"","text":"DERIREC...

  16. United Nations Economic Commission for Europe | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    field, in cooperation with other global players and key stakeholders, notably the business community. The UNECE also sets out norms, standards and conventions to facilitate...

  17. Greenhouse Gas Emission Trends and Projections in Europe 2009...

    OpenEI (Open Energy Information) [EERE & EIA]

    Liechtenstein, Poland and Turkey provided updated information on emission projections and national programmes in 2009." References "Greenhouse Gas Emission Trends and...

  18. Nat Fisch Wins Europe's Alfvn Prize | Princeton Plasma Physics...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Medal for Outstanding Mentor in 2002, the Ernest Orlando Lawrence Award in 2004, and the James Clerk Maxwell Prize for Plasma Physics in 2005. "Being selected for this award is...

  19. The Office of Nuclear Energy Announces Central Europe Nuclear...

    Energy.gov [DOE] (indexed site)

    The Office of Nuclear Energy, in partnership with Czech Republic Ministry of Industry and Trade, Ministry of Foreign Affairs, the State Agency for Nuclear Safety of the Czech ...

  20. FSU/Eastern Europe: Russia spearheads small upturn

    SciTech Connect

    1996-08-01

    The paper discusses the political and legal scene in Russia, domestic restructuring, exploration, drilling, development by Western companies and by Russian companies, and production. Exploration and development in Azerbaijan, Kazakhstan, Turkmenistan, Ukraine, Armenia, Belarus, Georgia, Kyrgyzstan, Latvia, Lithuania, Moldova, Tajikistan, Uzbekistan, Albania, Bulgaria, Croatia, Czech Republic, Hungary, Poland, Romania, Slovakia, Slovenia, and Serbia are also discussed.

  1. Heavy and tar sand oil deposits of Europe

    SciTech Connect

    Cornelius, C.D.

    1984-09-01

    Several hundred heavy and extra-heavy oil and natural bitumen occurrences from 26 European countries (including European Turkey and the western borderlands of the USSR) were compiled. The definitions used for heavy crude oils and natural bitumens, as proposed by or prepared with the UNITAR/UNDP information center, were applied. Information on stratigraphy, lithology, and depth as well as on gravity, viscosity, and gas and water content, is given. Deposits are characteristically distributed along the flanks of the basins or within the separating uplifts. Nevertheless, they are found from the surface down to depths of 3000 m (9800 ft). Up to now, big accumulations have been exploited in Albania and Sicily, but they have been discovered also in the British North Sea, France, Spain, and West Germany. In carbonates, they were mostly encountered in fractures of synsedimentary or tectonic origin. The accumulations are the result of either intrusion of immature heavy oil from a source rock or of the immigration of mature oil, which was biodegraded afterward. In many cases, there have been at least two separate migration/accumulation events. In some cases paleoseepages did supply a source rock with asphaltic material or became an effective seal of a later hydrocarbon accumulation.

  2. USAID Europe and Eurasia Climate Program | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Country Armenia, Republic of Macedonia, Russia, Ukraine, Poland, Kazakhstan, Hungary, Turkey, Uzbekistan, Turkmenistan, Lithuania, Estonia, Latvia, Azerbaijan, Tajikistan Western...

  3. Spomenka Kobe, Jozef Stefan Institut, Rare Earth Magnets in Europe...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Hadjipanayis, Chairman, Department of Physics and Astronomy, University of Delaware, Moving Beyond Neodymium-Iron Permanent Magnets for EV Motors Iowa lab gets critical materials...

  4. Structural and sedimentological controls and diagenesis in the Ravenspurn north gas reservoir United Kingdom southern North Sea

    SciTech Connect

    Turner, P. ); Jones, M. ); Prosser, J. ); Williams, G. )

    1993-09-01

    The Ravenspurn area is divided into two main northwest-southeast-trending fault blocks which are markedly different in terms of their diagenetic evolution and reservoir performance. The northeasterly B structure contained gas earlier and was unaffected by Middle to Late Jurassic illitization. The southwesterly A structure was uplifted later and received accumulated gas after reservoir quality was reduced by pervasive illitization. The deposition of allogenic clay and the formation of early quartz, nonferroan dolomite, and anhydrite reduced the reservoir quality of fluvial sheetflood. Burial diagenesis resulted initially in ferroan dolomite, kaolinite, and later quartz precipitation in available primary and secondary porosity. Stable-isotope and fluid-inclusion studies indicate that Ferroan dolomite and later quartz precipitated at about 100[degrees]C in the Triassic-Early Jurassic from reduced fluids derived partly from the Carboniferous basement. Gas accumulation took place first in the northeasterly B structure, which had early closure. Elsewhere diagenetic fluids evolved to a more alkaline state, and widespread illitization took place which particularly affected more permeable eolian facies. The illitization reduced the reservoir quality of the lower Leman Sandstone and contributed to diagenetic sealing (to the northwest) of the field. K-Ar dating indicates that peak illitization took place between 150 and 170 Ma (Middle-Late Jurassic). Subsequent periods of uplift in the late Cimmerian and particularly during the early Tertiary-Miocene produced the final structure of Ravenspurn North and the spillage of gas into this structure. The combination of structural and diagenetic events explains the differences in reservoir quality and well performance of the two structural blocks in the field.

  5. An analysis of markets for small-scale, advanced coal-combustion technology in Spain, Italy, and Turkey

    SciTech Connect

    Placet, M.; Gerry, P.A.; Kenski, D.M.; Kern, D.M.; Nehring, J.L.; Szpunar, C.B.

    1989-09-01

    This report discusses the examination of potential overseas markets for using small-scale, US-developed, advanced coal-combustion technologies (ACTs). In previous work, member countries of the Organization for Economic Cooperation and Development (OECD) were rated on their potential for using ACTs through a comprehensive screening methodology. The three most promising OECD markets were found to be Spain, Italy, and Turkey. This report provides in-depth analyses of these three selected countries. First, it addresses changes in the European Community with particular reference to the 1992 restructuring and its potential effect on the energy situation in Europe, specifically in the three subject countries. It presents individual country studies that examine demographics, economics, building infrastructures, and energy-related factors. Potential niches for ACTs are explored for each country through regional analyses. Marketing channels, strategies, and the trading environments in each country are also discussed. The information gathered indicates that Turkey is a most promising market, Spain is a fairly promising market, and Italy appears to be a somewhat limited market for US ACTs. 76 refs., 16 figs., 14 tabs.

  6. Buildings Energy Data Book: 1.1 Buildings Sector Energy Consumption

    Buildings Energy Data Book

    3 World Primary Energy Consumption and Population, by Country/Region 1990-2000 2000-2010 Region/Country 1990 2000 2010 1990 2000 2010 Energy Pop. Energy Pop. United States 85.0 99.8 97.8 18.7% 250 282 311 4.6% 1.6% 1.2% -0.2% 1.0% China 27.0 36.4 104.6 20.0% 1,148 1,264 1,343 20.0% 3.0% 1.0% 11.1% 0.6% OECD Europe 69.9 76.8 79.6 15.2% 402 522 550 8.2% 0.9% 2.6% 0.4% 0.5% Other Non-OECD Asia 12.5 20.6 31.3 6.0% 781 1,014 1,086 16.2% 5.1% 2.6% 4.2% 0.7% Russia (1) 61.0 27.2 29.9 5.7% 288 147 140

  7. U.S. Energy Information Administration (EIA)

    Annual Energy Outlook

    Nonmanufacturing sector Service sector rest of economy OECD 1.5 2.4 1.8 2 OECD ... DOEEIA-0383 (Washington, DC: April 2015). Rest of World: Oxford Economics, Global ...

  8. Oil and gas outlook

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2011 2012 2013 2014 2015 non-OECD consumption growth non-OECD GDP growth* Prices and economic growth are important, but policy, preferences, and technology may have a bigger...

  9. Analysis of international efforts in energy research and development

    SciTech Connect

    Rezaiyan, A.J.; Gill, R.T.

    1995-09-01

    Research and experimental development comprise innovative and creative work undertaken systematically to increase the stock of knowledge of science, engineering, and society. This knowledge reserve is used to improve living conditions and standards, including economic growth. Research and development (R&D) expenditures are useful measures of the scale and direction of technological innovation within a country, industry, or scientific field. Administrators concerned with economic growth and performance rely on R&D statistics as one possible type of indicator of technological change. R&D statistics are an essential tool in many government programs and evaluations (OECD 1993). The objective of the analysis was to identify and evaluate R&D funding sources, levels, and trends in the energy sectors of selected industrialized countries (Australia, Belgium, Canada, Denmark, Finland, France, Germany, Italy, Japan, Netherlands, Norway, Sweden, Switzerland, United Kingdom, United States) and the European Union (EU). Fossil fuel technologies, particularly fuel cells and advanced gas turbines, were the focus of the analysis, whose results are presented in this report.

  10. Technical and economic feasibility of the low energy geothermal sources in Europe. Appendices. Final report. Faisabilite technique et economique de la geothermie basse energie en Europe. Annexes

    SciTech Connect

    Not Available

    1984-01-01

    This is Part 2 of an earlier report and comprises 14 appendices of technical matter covering the determination of hydrogeological characteristics in a geothermal system, provisional technical programs for such things as drilling and well-tubing, influence of climatic data, heat exchangers and pumps, cost of production and injection pumps, transportation of geothermal water, examples of heat balances in industries such as the malting, brewing, dairy and tannery industries, and the utilization of a geothermal source in the mineral industry. Detailed reports are given for each of the systems already in existence in France. The present geothermal situation in Italy is reviewed together with projects and forecasts of use.

  11. Benzene exposure in the petroleum distribution industry associated with leukemia in the United Kingdom: Overview of the methodology of a case-control study

    SciTech Connect

    Rushton, L.

    1996-12-01

    This paper describes basic principles underlying the methodology for obtaining quantitative estimates of benzene exposure in the petroleum marketing and distribution industry. Work histories for 91 cases of leukemia and 364 matched controls (4 per case) identified for a cohort of oil distribution workers up to the end of 1992 were obtained, primarily from personnel records. Information on the distribution sites, more than 90% of which were closed at the time of data collection, was obtained from site visits and archive material. Industrial hygiene measurements measured under known conditions were assembled for different tasks. These were adjusted for conditions where measured data were not available using variables known to influence exposure, such as temperature, technology, percentage of benzene in fuel handled, products handled, number of loads, and job activity. A quantitative estimate of dermal contact and peak exposure was also made. 20 refs., 1 fig., 3 tabs.

  12. Estimates of rainfall over the United Kingdom and surrounding seas from the SSM/I using the polarization corrected temperature algorithm

    SciTech Connect

    Todd, M.C.; Bailey, J.O.

    1995-06-01

    The 85-GHz polarization corrected temperature PCT{sub 85} algorithm, using the V85 and H85 channels of the SSM/I sensor, is evaluated for estimation of midlatitude rainfall. The algorithm {theta} parameter and rain/no-rain thresholds are examined and found to be highly variable. Methods for automatic calibration, to account for variable atmospheric and surface conditions, are presented. Derivation of {theta} and thresholds for each individual scene provides a marked improvement in rainfall identification accuracy over the equivalent monthly values. The algorithm is calibrated by comparison with radar data for the estimation of instantaneous rain rates. Detailed evaluation of a number of case studies suggest the relationship of PCT{sub 85} and rain rate is substantially different for frontal and mesoscale convective system rainfall. For most frontal conditions the PCT{sub 85} provides useful estimates of rain rates with sensitivity to rain intensities as low as 0.1 mm h{sup -1}. Overall, the PCT{sub 85} estimates of instantaneous rain rate at the footprint scale are to within {+-}75% of the radar quantity only 50% of the time. Systematic errors result from both the calibration process and from the inability of microwave scattering methods to identify warm rain processes, including orographically enhanced rainfall over land. The results show the need for improved empirical calibration of passive microwave algorithms to provide sensitivity to subsynoptic-scale surface and atmospheric conditions and rainfall processes. 25 refs., 14 figs., 5 tabs.

  13. A Compilation of Boiling Water Reactor Operational Experience for the United Kingdom's Office for Nuclear Regulation's Advanced Boiling Water Reactor Generic Design Assessment

    SciTech Connect

    Wheeler, Timothy A.; Liao, Huafei

    2014-12-01

    United States nuclear power plant Licensee Event Reports (LERs), submitted to the United States Nuclear Regulatory Commission (NRC) under law as required by 10 CFR 50.72 and 50.73 were evaluated for reliance to the United Kingdom’s Health and Safety Executive – Office for Nuclear Regulation’s (ONR) general design assessment of the Advanced Boiling Water Reactor (ABWR) design. An NRC compendium of LERs, compiled by Idaho National Laboratory over the time period January 1, 2000 through March 31, 2014, were sorted by BWR safety system and sorted into two categories: those events leading to a SCRAM, and those events which constituted a safety system failure. The LERs were then evaluated as to the relevance of the operational experience to the ABWR design.

  14. Report on the SNL/AWE/NSF international workshop on joint mechanics, Dartington, United Kingdom, 2729 April 2009.

    SciTech Connect

    Ewins, David J.; Bergman, Lawrence A.; Segalman, Daniel Joseph

    2010-08-01

    The SNL/AWE joint mechanics workshop, held in Dartington Hall, Totnes, Devon, UK 26-29 April 2009 was a follow up to another international joints workshop held in Arlington, Virginia, in October 2006. The preceding workshop focused on identifying what length scales and interactions would be necessary to provide a scientific basis for analyzing and understanding joint mechanics from the atomistic scale on upward. In contrast, the workshop discussed in this report, focused much more on identification and development of methods at longer length scales that can have a nearer term impact on engineering analysis, design, and prediction of the dynamics of jointed structures. Also, the 2009 meeting employed less technical presentation and more break out sessions for developing focused strategies than was the case with the early workshop. Several 'challenges' were identified and assignments were made to teams to develop approaches to address those challenges.

  15. Energy & Financial Markets - Crudeoil - U.S. Energy Information

    Gasoline and Diesel Fuel Update

    Administration (EIA) Non-OECD Oil consumption in developing countries that are not part of the Organization of Economic Cooperation and Development (OECD) has risen sharply in recent years. While oil consumption in the OECD countries declined between 2000 and 2010, non-OECD oil consumption increased more than 40 percent. China, India, and Saudi Arabia had the largest growth in oil consumption among the countries in the non-OECD during this period. Economic growth has a strong impact on oil

  16. Energy & Financial Markets - U.S. Energy Information Administration (EIA) -

    Gasoline and Diesel Fuel Update

    U.S. Energy Information Administration (EIA) Non-OECD Oil consumption in developing countries that are not part of the Organization of Economic Cooperation and Development (OECD) has risen sharply in recent years. While oil consumption in the OECD countries declined between 2000 and 2010, non-OECD oil consumption increased more than 40 percent. China, India, and Saudi Arabia had the largest growth in oil consumption among the countries in the non-OECD during this period. Economic growth has

  17. FBIS report. Science and technology: Europe/International, March 29, 1996

    SciTech Connect

    1996-03-29

    ;Partial Contents: Advanced Materials (EU Project to Improve Production in Metal Matrix Compounds Noted, Germany: Extremely Hard Carbon Coating Development, Italy: Director of CNR Metallic Materials Institute Interviewed); Aerospace (ESA Considers Delays, Reductions as Result of Budget Cuts, Italy: Space Agency`s Director on Restructuring, Future Plans); Automotive, Transportation (EU: Clean Diesel Engine Technology Research Reviewed); Biotechnology (Germany`s Problems, Successes in Biotechnology Discussed); Computers (EU Europort Parallel Computing Project Concluded, Italy: PQE 2000 Project on Massively Parallel Systems Viewed); Defense R&D (France: Future Tasks of `Brevel` Military Intelligence Drone Noted); Energy, Environment (German Scientist Tests Elimination of Phosphates); Advanced Manufacturing (France: Advanced Rapid Prototyping System Presented); Lasers, Sensors, Optics (France: Strategy of Cilas Laser Company Detailed); Microelectronics (France: Simulation Company to Develop Microelectronic Manufacturing Application); Nuclear R&D (France: Megajoule Laser Plan, Cooperation with Livermore Lab Noted); S&T Policy (EU Efforts to Aid Small Companies` Research Viewed); Telecommunications (France Telecom`s Way to Internet).

  18. Nat Fisch Wins Europe's Alfvén Prize | Princeton Plasma Physics...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    "I am very grateful that the European Physical Society reached across the ocean to ... phenomena, including new ways of creating electrical currents using radio-frequency waves. ...

  19. Characterization of a Messer – The late-Medieval single-edged sword of Central Europe

    SciTech Connect

    Fajfar, Peter; Medved, Jožef; Klančnik, Grega; Lazar, Tomaž; Nečemer, Marijan; Mrvar, Primož

    2013-12-15

    Metallurgical characterization of a sword blade fragments dating from the second half of the 15th century found in central Slovenia was performed in order to determine its chemical composition, microstructure, microhardness, and to obtain insight into the methods of manufacture of a late-medieval Messer sword. As the artefact was broken, examinations were limited to six very small fragments that were allowed to be removed from the cutting edge, core and the back of the blade. Light optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, energy dispersive X-ray fluorescence spectrometry, differential scanning calorimetry, thermodynamics approach and Vickers micro-hardness tests were employed to analyze the microstructure and mechanical properties. The results show that the sword was manufactured from a single wrought iron billet. The surface of the sword was carburized. No evidence of quenching was found. The ferritic microstructure is concentrated in the core, and the pearlitic in the outer layer of the blade. All metal fragments contained non-metallic inclusions that were derived mostly from slag and some from hammer scale. - Highlights: • A metallurgical characterization of a medieval sword blade has been performed. • The carbon content decreased from the surface to the core of the blade. • The dominant microstructure in the outer layer is pearlite and in the core is ferrite. • The presence of lump shaped and elongated non-metallic inclusions was observed. • The sword was manufactured from a single wrought iron billet.

  20. Institute of Energy for South-East Europe | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    (Including fossil fuels, hydroelectricity and nuclear energy), Exploration and production of hydrocarbons, including natural gas. (upstream), Refining, marketing and...

  1. Cardiovascular and Interventional Radiological Society of Europe Guidelines on Endovascular Treatment in Aortoiliac Arterial Disease

    SciTech Connect

    Rossi, Michele; Iezzi, Roberto

    2013-11-06

    PurposeThese guidelines are intended for use in assessing the standard for technical success and safety in aorto-iliac percutaneous endovascular interventions.MethodsAny recommendation contained in the text comes from the highest level and extension of literature review available to date.ResultsThe success of endovascular procedures is strictly related to an accurate planning based mainly on CT- or MR-angiography. TASC II A through C lesions have an endovascular-first option Pre-procedure ASA antiplatelet therapy is advisable in all cases. The application of stents improves the immediate hemodynamic and most likely long-term clinical results. Cumulative mean complication rate is 7.51% according to the most relevant literature. Most of the complications can be managed by means of percutaneous techniques.ConclusionThe design and quality of devices, as well as the easy and accuracy of performing these procedures, have improved over the last decades, leading to the preferential treatment of aorto-iliac steno-obstructive disease via endovascular means, often as first-line therapy, with high technical success rate and low morbidity. This is mirrored by the decreasing number of patients undergoing surgical grafts over the last years with patency, limb salvage, and survival rates equivalent to open reconstruction.

  2. The legal status of UF{sub 6}-cylinder testing and licensing in Germany (and Europe)

    SciTech Connect

    Wieser, K.E.; Tietze, A.

    1991-12-31

    New German and European transport regulations for road and rail transport of UF{sub 6}-cylinders are presented, in particular those provisions which have direct impact on the majority of cylinders used in shipments touching ADR and RID member states. First experiences and difficulties in it`s application are highlighted taking into account experiences of a for running German regulation. A summary of research efforts on the behaviour of cylinders in fire environments concludes the paper.

  3. 15-CS-1035 ESnet EuropeUS Map_EEX_v4

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Office of Science National Labs Ames ANL BNL FNAL JLAB Ames Laboratory (Ames, IA) Argonne National Laboratory (Argonne, IL) Brookhaven National Laboratory (Upton, NY) Fermi...

  4. The greening of party politics in western Europe: Environmentalism, economics, and partisan orientations in four nations

    SciTech Connect

    Rohrschneider, R.

    1989-01-01

    This research is guided by two overarching questions. First, why do publics in West European nations support environmental organizations And second, what is the effect of environmental group support on economically based partisan orientations In order to address these questions, we analyze public opinion surveys (1982-1986) in Germany, France, Great Britain and the Netherlands. The findings suggest that European publics give considerable support to environmental organizations in these four nations. The two factors which are particularly strongly related to environmental group support are post material value priorities and the perception of national pollutions problems. Moreover, environmentalism is integrated into a well structured schema which guides the evaluation of environmentally related information. Considerable variations across national emerge in regard to the link between citizens' partisanship and environmental group support. In Germany and the Netherlands, environmentalism provides the basis for new partisan cleavage- Individuals who evaluate environmental groups favorably are much more likely to support New left or Old left parties. In contrast to these two nations, citizens' partisanship in France and Great Britain is dominated by economic policy positions; environmental group support is only weakly linked to individuals' partisan choice. These findings suggest that environmentalism will be an important influence on European public opinion and party systems in the foreseeable future.

  5. Measurement of diesel solid nanoparticle emissions using a catalytic stripper for comparison with Europe's PMP protocol

    Energy.gov [DOE]

    Evaluation and comparison of the measurements of diesel solid nanoparticle emissions using the European Particle Measurement Programme (PMP) system and catalytic stripper

  6. PAHs content of sewage sludge in Europe and its use as soil fertilizer

    SciTech Connect

    Suciu, Nicoleta A. Lamastra, Lucrezia; Trevisan, Marco

    2015-07-15

    Highlights: • Sewage sludge contamination by PAHs may restrict its use as soil fertilizer. • Long term data concerning sewage sludge contamination by PAHs is lacking. • Literature review for EU countries and monitoring data for Italy is presented. • Focus PEARL model was used to simulate B(a)Pyr, the most toxic PAH, fate in soil. • The simulated B(a)Pyr soil concentration was much lower than its LOEC for soil organisms. - Abstract: The European Commission has been planning limits for organic pollutants in sewage sludge for 14 years; however no legislation has been implemented. This is mainly due to lack of data on sewage sludge contamination by organic pollutants, and possible negative effects to the environment. However, waste management has become an acute problem in many countries. Management options require extensive waste characterization, since many of them may contain compounds which could be harmful to the ecosystem, such as heavy metals, organic pollutants. The present study aims to show the true European position, regarding the polycyclic aromatic hydrocarbons (PAHs) content of sewage sludge, by comparing the Italian PAHs content with European Union countries, and at assessing the suitability of sewage sludge as soil fertilizer. The FOCUS Pearl model was used to estimate the concentration of benzo [a] pyrene (B(a)Pyr), the most toxic PAH in soil, and its exposure to organisms was then evaluated. The simulated B(a)Pyr and PAHs, expressed as B(a)Pyr, concentrations in soil were much lower than the B(a)Pyr’s most conservative lowest observable effect concentration (LOEC) for soil organisms. Furthermore, the results obtained indicate that it is more appropriate to apply 5 t ha{sup −1} sewage sludge annually than 15 t ha{sup −1} triennially. Results suggest, the EU maximum recommended limit of 6 mg kg{sup −1} PAHs in sewage sludge, should be conservative enough to avoid groundwater contamination and negative effects on soil organisms.

  7. Energy and Environmental Issues in Eastern Europe and Central Asia: An Annotated Guide to Information Resources

    SciTech Connect

    Gant, K.S.

    2000-10-09

    Energy and environmental problems undermine the potential for sustained economic development and contribute to political and economic instability in the strategically important region surrounding the Caspian and Black Seas. Many organizations supporting efforts to resolve problems in this region have found that consensus building--a prerequisite for action--is a difficult process. Reaching agreement on priorities for investment, technical collaboration, and policy incentives depends upon informed decision-making by governments and local stakeholders. And while vast quantities of data and numerous analyses and reports are more accessible than ever, wading through the many potential sources in search of timely and relevant data is a formidable task. To facilitate more successful data searches and retrieval, this document provides annotated references to over 200 specific information sources, and over twenty primary search engines and data retrieval services, that provide relevant and timely information related to the environment, energy, and economic development around the Caspian and Black Seas. This document is an advance copy of the content that Oak Ridge National Laboratory (ORNL) plans to transfer to the web in HTML format to facilitate interactive search and retrieval of information using standard web-browser software.

  8. Reforms, environmental concerns spurring growth opportunities for gas, electricity in U.S., Europe

    SciTech Connect

    Carson, M.

    1998-06-29

    As the 21st century approaches, deregulation of developed economies, economic liberalization, and an emphasis on cleaner fuels are creating significant growth opportunities for electricity, natural gas, and other forms of energy on both sides of the Atlantic Ocean. The paper discusses the US status, European vs. US fuel use, dominant fuels vs. strategies, fuel use trends, opportunities for electricity growth, and trends and observations. An additional section describes the slowing of the trillion dollar international independent power market.

  9. Packaging waste recycling in Europe: Is the industry paying for it?

    SciTech Connect

    Ferreira da Cruz, Nuno Ferreira, Sandra; Cabral, Marta; Simões, Pedro; Marques, Rui Cunha

    2014-02-15

    Highlights: • We study the recycling schemes of France, Germany, Portugal, Romania and the UK. • The costs and benefits of recycling are compared for France, Portugal and Romania. • The balance of costs and benefits depend on the perspective (strictly financial/economic). • Financial supports to local authorities ought to promote cost-efficiency. - Abstract: This paper describes and examines the schemes established in five EU countries for the recycling of packaging waste. The changes in packaging waste management were mainly implemented since the Directive 94/62/EC on packaging and packaging waste entered into force. The analysis of the five systems allowed the authors to identify very different approaches to cope with the same problem: meet the recovery and recycling targets imposed by EU law. Packaging waste is a responsibility of the industry. However, local governments are generally in charge of waste management, particularly in countries with Green Dot schemes or similar extended producer responsibility systems. This leads to the need of establishing a system of financial transfers between the industry and the local governments (particularly regarding the extra costs involved with selective collection and sorting). Using the same methodological approach, the authors also compare the costs and benefits of recycling from the perspective of local public authorities for France, Portugal and Romania. Since the purpose of the current paper is to take note of who is paying for the incremental costs of recycling and whether the industry (i.e. the consumer) is paying for the net financial costs of packaging waste management, environmental impacts are not included in the analysis. The work carried out in this paper highlights some aspects that are prone to be improved and raises several questions that will require further research. In the three countries analyzed more closely in this paper the industry is not paying the net financial cost of packaging waste management. In fact, if the savings attained by diverting packaging waste from other treatment (e.g. landfilling) and the public subsidies to the investment on the “recycling system” are not considered, it seems that the industry should increase the financial support to local authorities (by 125% in France, 50% in Portugal and 170% in Romania). However, in France and Portugal the industry is paying local authorities more than just the incremental costs of recycling (full costs of selective collection and sorting minus the avoided costs). To provide a more definitive judgment on the fairness of the systems it will be necessary to assess the cost efficiency of waste management operators (and judge whether operators are claiming costs or eliciting “prices”)

  10. FBIS report. Science and technology: Europe/international, November 3, 1995

    SciTech Connect

    1995-11-03

    ;Partial Contents: Netherlands: Program Gives Priority to Materials Research; Germany: Minister Ruettgers Outlines Biotechnology R&D Priorities; Germany: Structure of Defense-Related R&D Detailed; Germany: New Designs in Fiber Lasers Explored; France: CEA Carries Out Research on Cold Fusion; Germany: Research Society`s R&D Programs for 1996 Summarized; and EU Council Adopts Advanced Television Services Action Plan.

  11. Comparison of personal radio frequency electromagnetic field exposure in different urban areas across Europe

    SciTech Connect

    Joseph, Wout; University of Basel ; Thuroczy, Gyoergy; French National Institute for Industrial Environment and Risks , Verneuil en Halatte ; Gajsek, Peter; Trcek, Tomaz; Bolte, John; Vermeeren, Guenter; University of Basel ; Juhasz, Peter; Finta, Viktoria

    2010-10-15

    Background: Only limited data are available on personal radio frequency electromagnetic field (RF-EMF) exposure in everyday life. Several European countries performed measurement studies in this area of research. However, a comparison between countries regarding typical exposure levels is lacking. Objectives: To compare for the first time mean exposure levels and contributions of different sources in specific environments between different European countries. Methods: In five countries (Belgium, Switzerland, Slovenia, Hungary, and the Netherlands), measurement studies were performed using the same personal exposure meters. The pooled data were analyzed using the robust regression on order statistics (ROS) method in order to allow for data below the detection limit. Mean exposure levels were compared between different microenvironments such as homes, public transports, or outdoor. Results: Exposure levels were of the same order of magnitude in all countries and well below the international exposure limits. In all countries except for the Netherlands, the highest total exposure was measured in transport vehicles (trains, car, and busses), mainly due to radiation from mobile phone handsets (up to 97%). Exposure levels were in general lower in private houses or flats than in offices and outdoors. At home, contributions from various sources were quite different between countries. Conclusions: Highest total personal RF-EMF exposure was measured inside transport vehicles and was well below international exposure limits. This is mainly due to mobile phone handsets. Mobile telecommunication can be considered to be the main contribution to total RF-EMF exposure in all microenvironments.

  12. Room temperature ferrimagnetism and ferroelectricity in strained...

    Office of Scientific and Technical Information (OSTI)

    Univ. of Cambridge, Cambridge (United Kingdom). Dept. of Materials Science Rutherford Appleton Lab., Didcot (United Kingdom). ISIS, Science and Technology Facilities Council ...

  13. Vertical structure and physical processes of the Madden-Julian...

    Office of Scientific and Technical Information (OSTI)

    ... Met Office, Exeter (United Kingdom) Univ. of Reading, Reading (United Kingdom). National Centre for Atmospheric Science-Climate California Inst. of Technology (CalTech), Pasadena, ...

  14. EWIS European wind integration study (Smart Grid Project) (United...

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom) Jump to: navigation, search Project Name EWIS European wind integration study Country United Kingdom Coordinates 55.378052, -3.435973 Loading map......

  15. UK - NETL Cooperation | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Cooperation AgencyCompany Organization National Energy Technology Laboratory Partner United Kingdom Sector Energy Website http:www.netl.doe.govtechno Country United Kingdom...

  16. Wavegen Ltd | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search Name: Wavegen Ltd Address: 13a Harbour Rd Place: Inverness, Scotland, United Kingdom Zip: IV1 1SY Region: United Kingdom Sector: Marine and Hydrokinetic...

  17. AFTER A Framework for electrical power sysTems vulnerability...

    OpenEI (Open Energy Information) [EERE & EIA]

    United Kingdom) Jump to: navigation, search Project Name AFTER A Framework for electrical power sysTems vulnerability identification, dEfense and Restoration Country United Kingdom...

  18. Modelling and Development of a High Performance Milling Process...

    Office of Scientific and Technical Information (OSTI)

    AMRC - Advanced Manufacturing Research Centre with Boeing, University of Sheffield (United Kingdom) Technicut Limited, 609-617 Attercliffe Road, Sheffield S93RD UK (United Kingdom) ...

  19. Parallel Multigrid Equation Solver () | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Islands Tuvalu UN UNIDO USSR Uganda Ukraine United Arab Emirates United Kingdom ... Islands Tuvalu UN UNIDO USSR Uganda Ukraine United Arab Emirates United Kingdom ...

  20. Price Liquefied Freeport, TX Natural Gas Exports Price to United...

    Annual Energy Outlook

    United Kingdom (Dollars per Thousand Cubic Feet) Price Liquefied Freeport, TX Natural Gas Exports Price to United Kingdom (Dollars per Thousand Cubic Feet) Decade Year-0 Year-1...

  1. Meet CMI Researcher Lynn Boatner | Critical Materials Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    International, and the Institute of Materials, Minerals, and Mining of the United Kingdom. ... the Institute of Materials, Minerals, and Mining of the United Kingdom; the Francis F. ...

  2. 2015 Uranium Marketing Annual Report

    Energy Information Administration (EIA) (indexed site)

    U.S. Energy Information Administration / 2015 Uranium Marketing Annual Report 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May 2017 thousand separative work units (SWU) Country of enrichment service (SWU-origin) 2011 2012 2013 2014 2015 China W W W 636 W France W 0 0 0 0 Germany 1,539 1,075 753 1,005 1,281 Netherlands 1,506 1,496 2,112 1,801 2,385 Russia 5,308 6,560 2,491 3,083 2,234 United Kingdom 2,813 2,648 2,674 2,435 2,522 Europe 1 670 W 0 W 0 Other 2

  3. Table 7.4 Coal Imports by Country of Origin, 2000-2011 (Short Tons)

    Energy Information Administration (EIA) (indexed site)

    Coal Imports by Country of Origin, 2000-2011 (Short Tons) Year Australia New Zealand Canada Mexico Colombia Venezuela China India Indonesia Europe South Africa Other Total Norway Poland Russia Ukraine United Kingdom Other Total 2000 167,595 0 1,923,434 6,671 7,636,614 2,038,774 19,646 205 718,149 0 0 1,212 0 238 0 1,450 0 85 12,512,623 2001 315,870 24,178 2,571,415 8,325 11,176,191 3,335,258 109,877 1,169 882,455 15,933 514,166 219,077 0 75,704 12 824,892 440,408 97,261 19,787,299 2002 821,280 0

  4. Table 7.5 Coal Exports by Country of Destination, 1960-2011 (Thousand Short Tons)

    Energy Information Administration (EIA) (indexed site)

    Coal Exports by Country of Destination, 1960-2011 (Thousand Short Tons) Year Canada Brazil Europe Japan Other 3 Total Belgium 1 Denmark France Germany 2 Italy Nether- lands Spain Turkey United Kingdom Other 3 Total 1960 12,843 1,067 1,116 130 794 4,566 4,899 2,837 331 NA – 2,440 17,113 5,617 1,341 37,981 1961 12,135 994 971 80 708 4,326 4,797 2,552 228 NA – 2,026 15,688 6,614 974 36,405 1962 12,302 1,327 1,289 38 851 5,056 5,978 3,320 766 NA 2 1,848 19,148 6,465 973 40,215 1963 14,557 1,161

  5. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    5 Table 7.4 Coal Imports by Country of Origin, 2000-2011 (Million Short Tons) Year Australia New Zealand Canada Mexico Colombia Venezuela China India Indonesia Europe South Africa Other Total Norway Poland Russia Ukraine United Kingdom Other Total 2000 0.2 0.0 1.9 (s) 7.6 2.0 (s) (s) 0.7 0.0 0.0 (s) 0.0 (s) 0.0 (s) 0.0 (s) 12.5 2001 .3 (s) 2.6 (s) 11.2 3.3 .1 (s) .9 (s) .5 .2 .0 .1 (s) .8 .4 .1 19.8 2002 .8 .0 2.1 (s) 9.2 3.3 .1 (s) 1.0 .0 .1 .1 .0 (s) (s) .2 .1 (s) 16.9 2003 .3 .1 2.1 .0 15.5

  6. International petroleum statistics report, November 1993

    SciTech Connect

    Not Available

    1993-11-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992: and OECD trade from 1982 through 1992.

  7. International petroleum statistics report, October 1997

    SciTech Connect

    1997-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 48 tabs.

  8. International Workshop on Characterization and PIE Needs for Fundamental Understanding of Fuels Performance and Safety

    SciTech Connect

    Not Listed

    2011-12-01

    The International Workshop on Characterization and PIE Needs to Support Science-Based Development of Innovative Fuels was held June 16-17, 2011, in Paris, France. The Organization for Economic Co-operation and Development (OECD), Nuclear Energy Agency (NEA) Working Party on the Fuel Cycle (WPFC) sponsored the workshop to identify gaps in global capabilities that need to be filled to meet projected needs in the 21st century. First and foremost, the workshop brought nine countries and associated international organizations, together in support of common needs for nuclear fuels and materials testing, characterization, PIE, and modeling capabilities. Finland, France, Germany, Republic of Korea, Russian Federation, Sweden, Switzerland, United Kingdom, United States of America, IAEA, and ITU (on behalf of European Union Joint Research Centers) discussed issues and opportunities for future technical advancements and collaborations. Second, the presentations provided a base level of understanding of current international capabilities. Three main categories were covered: (1) status of facilities and near term plans, (2) PIE needs from fuels engineering and material science perspectives, and (3) novel PIE techniques being developed to meet the needs. The International presentations provided valuable data consistent with the outcome of the National Workshop held in March 2011. Finally, the panel discussion on 21st century PIE capabilities, created a unified approach for future collaborations. In conclusion, (1) existing capabilities are not sufficient to meet the needs of a science-based approach, (2) safety issues and fuels behavior during abnormal conditions will receive more focus post-Fukushima; therefore we need to adopt our techniques to those issues, and (3) International collaboration is needed in the areas of codes and standards development for the new techniques.

  9. International petroleum statistics report

    SciTech Connect

    Not Available

    1994-05-01

    This monthly publication provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  10. International petroleum statistics report

    SciTech Connect

    Not Available

    1995-01-01

    This monthly publication provides current data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  11. Energy & Financial Markets - Petprod - U.S. Energy Information

    Gasoline and Diesel Fuel Update

    Administration (EIA) Consumption Countries outside of the Organization for Economic Cooperation and Development (OECD) drove increases in global demand for petroleum products in recent years. In aggregate, non-OECD countries consumed more petroleum products than OECD countries for the first time in 2014. Global distillate consumption tends to rise as developing countries show robust economic growth because their economies tend to be driven by industry and manufacturing rather than services.

  12. International petroleum statistics report

    SciTech Connect

    Not Available

    1994-06-01

    This report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world, presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production, oil stocks, demand, and trade in OECD countries.

  13. Return to 1990: The cost of mitigating United States carbon emissions in the post-2000 period

    SciTech Connect

    Edmonds, J.A.; Kim, S.H.; MacCracken, C.N.; Sands, R.D.; Wise, M.A.

    1997-10-01

    The Second Generation Model (SGM) is employed to examine four hypothetical agreements to reduce emissions in Annex 1 nations (OECD nations plus most of the nations of Eastern Europe and the former Soviet Union) to levels in the neighborhood of those which existed in 1990, with obligations taking effect in the year 2010. The authors estimate the cost to the US of complying with such agreements under three distinct conditions: no trading of emissions rights, trading of emissions rights only among Annex 1 nations, and a fully global trading regime. The authors find that the marginal cost of returning to 1990 emissions levels in the US in the absence of trading opportunities is approximately $108 per metric ton carbon in 2010. The total cost in that year is approximately 0.2% of GDP. International trade in emissions permits lowers the cost of achieving any mitigation objective by equalizing the marginal cost of carbon mitigation among countries. For the four mitigation scenarios in this study, economic costs to the US remain below 1% of GDP through at least the year 2020.

  14. Visualization of World Energy Supply | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    isualizationofWorldEnergySupply Cost: Free OpenEI Keyword(s): Community Generated Language: English References: OECD1 Motion chart visualization of the world energy supply...

  15. United Nations Economic Commission for Africa | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    for Economic Co-operation and Development (OECD) Ministerial Consultation known as "The Big Table" . Started in 2000, a small group of African Ministers of Finance gather with...

  16. By:\tDr.\tNabil\tNasr

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Raworth, K. et al. Oxfam: Oxford, UK, 2012. OECD's Sustainable Manufacturing Toolkit Sustainability components Issue Areas Indicators category Social responsibility Material use ...

  17. OSTI, US Dept of Energy Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    in DOE technology and contains selected scientific and technical software from the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD). ...

  18. Microsoft PowerPoint - Southern Presentation CAMD.pptx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Auditsinspections conducted in accordance with US FDA, US EPA, OECD, MOHW, UK Compliance Programme More than 60 internal auditsinspections conducted biennially 18 internal ...

  19. International petroleum statistics report

    SciTech Connect

    1996-08-01

    This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

  20. International Energy Agency (IEA)

    Energy.gov [DOE]

    The International Energy Agency is an international energy forum comprised of 29 industrialized countries under the Organization for Economic Development and Cooperation (OECD).

  1. Widget:Motion Chart Visualizations | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    References usenergyconsumption: SED data usconsumption2010: SED data worldenergysupply: OECD data Retrieved from "http:en.openei.orgwindex.php?titleWidget:MotionChartVisuali...

  2. International Transport Forum | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ernationaltransportforum.orgaboutstaff.html "The International Transport Forum at the OECD is an intergovernmental organisation with 52 member countries. It acts as a strategic...

  3. Paris, France: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy Agency (IEA) Organisation for Economic Co-Operation and Development (OECD) Renewable Energy Policy Network for the 21st Century (REN21) Registered Energy...

  4. Empowering Variable Renewables: Options for Flexible Electricity...

    OpenEI (Open Energy Information) [EERE & EIA]

    additional fast response power plants, interconnection or storage. Much of existing transmission hardware in OECD countries was built in the middle of the last century, and a new...

  5. International Atomic Energy Agency (IAEA) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Sustainable Development (WPISD). Partners include the OECD International Energy Agency (IEA), UN Department of Economic and Social Affairs (DESA), Eurostat, and the European...

  6. BaileyQdo

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    OECD/IEA 2010 Investor Flows and the 2008 Boom/Bust in Oil Prices Discussion by Bahattin Buyuksahin © OECD/IEA 2010 Quick Overview of Oil Market:  Rising uncertainty about the strength of global economy going forward has major impact on the oil market outlook  Emerging markets, hitherto the cornerstone of demand growth could see the greatest impact from economic slow-down  Until the recent concerns on sovereign debt (OECD) and inflation (non- OECD) intensified, higher crude prices had

  7. Monitoring and Tracking Long-Term Finance to Support Climate...

    OpenEI (Open Energy Information) [EERE & EIA]

    Sector: Energy, Climate Topics: Finance, GHG inventory Resource Type: Publications, Lessons learnedbest practices Website: www.oecd.orgdataoecd575748073739.pdf Cost:...

  8. Low Emission Development Strategies (LEDS): Technical, Institutional...

    OpenEI (Open Energy Information) [EERE & EIA]

    Energy, Land Topics: Low emission development planning Resource Type: Publications, Lessons learnedbest practices Website: www.oecd.orgdataoecd325846553489.pdf Low...

  9. Challenges in Alternative Energy Production

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... constrained by the flux Source: Tad Patzek, How Can We Outlive Our Way of Life?, OECD, Paris, 11-12 September 2007 Thebreakevencostsofenergy-input- ...

  10. Word Pro - S11

    Annual Energy Outlook

    April 2015 April 2016 Note: OECD is the Organization for Economic Cooperation and Development. Web Page: http:www.eia.govtotalenergydatamonthlyinternational. Source: Table ...

  11. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | | Year | | | | | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela| | | ||||...

  12. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | | Year | | | | | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela | | | |||...

  13. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela | | | |||||...

  14. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela| | | ||||| 1978...

  15. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | | | Year | | | | | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela| | | |||...

  16. --No Title--

    Energy Information Administration (EIA) (indexed site)

    | | | || | | Year | | | | | Month | | | Persian | Total | Non | United | | Gulf(1) | OPEC(2) | OPEC | Kingdom | Venezuela | | | |...

  17. European empirical methods applied to subsidence in U. S. coal fields

    SciTech Connect

    Munson, D.E.; Eichfeld, W.F.

    1980-10-01

    The empirical methods commonly used in Europe to describe the shape of subsidence troughs are tested against the field data of the York Canyon Mine in Northern New Mexico. This mine is in a flat lying seam under rugged terrain. The subsidence data consists of time-correlated measurements of surface displacements above two longwall panels. While the profile fits from the graphical methods (United Kingdom) do not agree with the measured profiles, the profile functions of the error integral type used in Continental Europe fit the data well. The profile function analysis of the development curves also suggests a time-dependent response of the overburden. These results, except for the specific profile function used, are similar to those found previously for longwall subsidence at the Old Ben No. 24 Mine. Parameter values of the fit, i.e., the effective half range of the function and inflection point offset, were determined for all profiles. These parameters for the development curves and traveling profiles, which fundamentally result from the same raw data, exhibit markedly different apparent ''scatter.'' The rather narrow range of values for the development curves suggest that individual points subside in a well-behaved manner; and hence, the large variation in parameter values for the traveling profiles reflects an inadequacy in the analysis in correlation between points. Consequently, the use of influence functions appears to be a possible method for improving the empirical analysis of longwall subsidence.

  18. 1994 Nuclear Industry Conference review

    SciTech Connect

    Hammons, T.J.

    1995-03-01

    The 1994 Nuclear Industry Conference, held in London United Kingdom, September 14--15, 1994, was the first serious nuclear energy conference to take place for more than 12 years. It had a challenging agenda, no less than whether the industry would sustain its role into the twenty-fist century. The conference focused on the world`s nuclear industry, which is in a crucial period of development, with few new reactors being built in Western Europe and none in the US. Attention in the industry is moving eastward to the troubled legacy of eastern Europe and to the dynamic new markets of the Far East. The immediate future of the reactor builders lies in these regions, for without new orders, the industry will decline. At the same time, the industry faces challenges at home. The end of the Cold War has brought a new appraisal of the fuel cycle, the ever-present dangers of proliferation, and the problems of long-term waste-disposal and decommissioning remain. New challenges include the role for nuclear energy as privatization of power utilities and liberalization of electricity markets takes place. Whether short-term market trends will dominate new orders for power plants or whether supply security considerations count was also discussed.

  19. Fact #839: September 22, 2014 World Petroleum Consumption Continues to Rise despite Declines from the United States and Europe

    Energy.gov [DOE]

    From 1980 to 2013, overall world petroleum consumption has increased from 63 to 90 million barrels per day. Overall consumption is the total of the individual countries/regions shown below....

  20. Health and vitality assessment of two common pine species in the context of climate change in southern Europe

    SciTech Connect

    Sicard, Pierre; Dalstein-Richier, Laurence

    2015-02-15

    The Mediterranean Basin is expected to be more strongly affected by ongoing climate change than most other regions of the earth. The South-eastern France can be considered as case study for assessing global change impacts on forests. Based on non-parametric statistical tests, the climatic parameters (temperature, relative humidity, rainfall, global radiation) and forest-response indicators (crown defoliation, discoloration and visible foliar ozone injury) of two pine species (Pinus halepensis and Pinus cembra) were analyzed. In the last 20 years, the trend analyses reveal a clear hotter and drier climate along the coastline and slightly rainier inland. In the current climate change context, a reduction in ground-level ozone (O{sub 3}) was found at remote sites and the visible foliar O{sub 3} injury decreased while deterioration of the crown conditions was observed likely due to a drier and warmer climate. Clearly, if such climatic and ecological changes are now being detected when the climate, in South-eastern France, has warmed in the last 20 years (+0.46–1.08 °C), it can be expected that many more impacts on tree species will occur in response to predicted temperature changes by 2100 (+1.95–4.59 °C). Climate change is projected to reduce the benefits of O{sub 3} precursor emissions controls leading to a higher O{sub 3} uptake. However, the drier and warmer climate should induce a soil drought leading to a lower O{sub 3} uptake. These two effects, acting together in an opposite way, could mitigate the harmful impacts of O{sub 3} on forests. The development of coordinated emission abatement strategies is useful to reduce both climate change and O{sub 3} pollution. Climate change will create additional challenges for forest management with substantial socio-economic and biological diversity impacts. However, the development of future sustainable and adaptive forest management strategies has the potential to reduce the vulnerability of forest species to climate change. - Highlights: • We assess climate change impacts on forests: South-eastern France as case study in the last 20 years. • We detect and estimate trends for O{sub 3} concentrations, climatic parameters and visible injury. • We establish a state-of-the-art of the health of 2 common pine species in a context of climate change. • We use two valuable bio-indicator species for O{sub 3} stress: Pinus halepensis and Pinus cembra. • Deterioration of crown conditions: climate change creates additional challenges for forest.

  1. Structural and stratigraphic analysis of the Dinaride thrust belt; A frontier exploration province in central-Southern Europe

    SciTech Connect

    Tasker, D.R.; Weir, G.M.; Dale, R.C. )

    1993-09-01

    The Dinarides are a 200-300-km-wide southwest vergent fold and thrust belt extending along the eastern margin of the Adriatic Sea. The complex and varied structural and stratigraphic relationships can be used to define three major tectonic units: the internal, central, and external Dinarides. In the Internal Dinarides, platform sequences deposited in the Early and Middle Triassic underwent rapid subsidence and drowning in the Late Triassic and Early Jurassic along with rifting and subsequent formation of oceanic crust. Melange and flysch were deposited during the late Jurassic through Cretaceous as the developing thrust belt encroached upon the northeastern margin of the Dinaride carbonate platform. The Dinaride carbonate platform forms the cores of the central and external Dinarides and is composed primarily of Permian-Triassic clastics and evaporites overlain by Middle Triassic through early Eocene platform carbonates. The entire sequence is overlain by late Eocene and early Oligocene synorogenic flysch. In the central Dinarides, late Jurassic and Early Cretaceous unconformities suggest structural uplift prior to the onset of thrusting. Deformation involves Paleozoic basement and includes a major decollement in the Permian Triassic clastic and evaporite unit. Thrusting in the external Dinarides occurred in the late Eocene-early Oligocene and is restricted to Middle Triassic and younger units with major detachments forming near the base of the Ladinian and within a Late Jurassic-Early Cretaceous evaporite. Important oil source and seal lithofacies occur within intraplatform basins and lagoons in the Mesozoic sequences of the central and external Dinarides. Widespread dolomitized units within the Mesozoic carbonate sequence are potential reservoir zones. The presence of surface hydrocarbon seeps and of existing production on trend to the Dinarides in the thrust belt of Italy and Albania suggest the potential for hydrocarbon discoveries in this underexplored area.

  2. Demonstration and Deployment Workshop - Day 2

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Share of Global Energy Demand 1975 2010 2035 20% 40% 60% 80% 100% 6 030 Mtoe 12 380 Mtoe 16 730 Mtoe Rest of non-OECD Middle East India China OECD 2 12 10 8 6 4 2 0 36% 30% 24% 18% ...

  3. Evaluation of European empirical methods for subsidence in US coal fields

    SciTech Connect

    Munson, D.E.; Eichfeld, W.F.

    1980-04-01

    The purpose of this study was to assess the applicability of European subsidence methods for the emerging US longwall practice. Subsidence prediction in Europe has typically used either graphical methods (United Kingdom) or mathematical methods. The mathematical methods utilize either profile or influence functions. The graphical methods were developed in the United Kingdom (UK) by the National Coal Board (NCB) from subsidence data obtained from numerous mines. Although a large data base in the United States (US) is not available, the methods can be tested against some recent measurements of subsidence of an essentially flat deposit mined at a depth of 189 m in the Illinois Coal Basin. While the total predicted subsidence by the NCB method is approximately correct, the profile shapes are not well matched. On the other hand, the profile functions, which are fundamentally independent of orientation with respect to mining, give quite accurate representation of the measured profiles. Of the antisymmetric forms tried, a trigonometric form was slightly preferably because it predicted strains that were conservative, i.e., always somewhat greater than the measured values. These results suggest that much of the European subsidence experience is applicable to US practice. Consistent values of the parameters were found for profiles with similar initial conditions or similar orientations for two longwall panel results. It should be noted that the actual profiles were always somewhat more complex than the profile functions could adequately handle and that the development curves showed time-dependent effects as well. The magnitude of these time-dependent effects, while possibly small compared to the time-independent or instantaneous subsidence, are of importance and must eventually be incorporated into a proper analysis.

  4. MOX Cross-Section Libraries for ORIGEN-ARP

    SciTech Connect

    Gauld, I.C.

    2003-07-01

    The use of mixed-oxide (MOX) fuel in commercial nuclear power reactors operated in Europe has expanded rapidly over the past decade. The predicted characteristics of MOX fuel such as the nuclide inventories, thermal power from decay heat, and radiation sources are required for design and safety evaluations, and can provide valuable information for non-destructive safeguards verification activities. This report describes the development of computational methods and cross-section libraries suitable for the analysis of irradiated MOX fuel with the widely-used and recognized ORIGEN-ARP isotope generation and depletion code of the SCALE (Standardized Computer Analyses for Licensing Evaluation) code system. The MOX libraries are designed to be used with the Automatic Rapid Processing (ARP) module of SCALE that interpolates appropriate values of the cross sections from a database of parameterized cross-section libraries to create a problem-dependent library for the burnup analysis. The methods in ORIGEN-ARP, originally designed for uranium-based fuels only, have been significantly upgraded to handle the larger number of interpolation parameters associated with MOX fuels. The new methods have been incorporated in a new version of the ARP code that can generate libraries for low-enriched uranium (LEU) and MOX fuel types. The MOX data libraries and interpolation algorithms in ORIGEN-ARP have been verified using a database of declared isotopic concentrations for 1042 European MOX fuel assemblies. The methods and data are validated using a numerical MOX fuel benchmark established by the Organization for Economic Cooperation and Development (OECD) Working Group on burnup credit and nuclide assay measurements for irradiated MOX fuel performed as part of the Belgonucleaire ARIANE International Program.

  5. Progress report on the management of the NEA ISOE system

    SciTech Connect

    Lazo, E.

    1995-03-01

    The Information System on Occupational Exposure (ISOE) was launched by the Organization for Economic Cooperation and Development (OECD), Nuclear Energy Agency (NEA) on 1 January, 1992, to facilitate the communication of dosimetric and ALARA implementation data among nuclear utilities around the world. After two years of operation the System has become a mature interactive network for transfer of data and experience. Currently, 37 utilities from 12 countries, representing 289 power plants, and 12 national regulatory authorities participate in ISOE. Agreements for cooperation also exist between the NEA and the Commission of the European Communities (CEC), and the Paris Center of the WOrld Association of Nuclear Operators (WANO-PC). In addition, the International Atomic Energy Agency (IAEA) is acting as a co-sponsor of ISOE for the participation of non-NEA member countries. Three Regional Technical Centres, Europe, Asia, and Non-NEA member countries, serve to administer the system. The ISOE Network is comprised of three data bases and a communications network at several levels. The three ISOE data bases include the following types of information: NEA1 - annual plant dosimetric information; NEA2 - plant operational characteristics for dose and dose rate reduction; and NEA3 - job specific ALARA practices and experiences. The ISOE communications network has matured greatly during 1992 and 1993. In addition to having access to the above mentioned data bases, participants may now solicit information on new subjects, through the Technical Centres, from all other participants on a real-time basis. Information Sheets on these studies are produced for distribution to all participants. In addition, Topical Reports on areas of interest are produced, and Topical Meetings are held annually.

  6. SAND97-8490 UC-404 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Reading Berks RG7 4PR United Kingdom Cambridge University Attn: Prof. M. F. Ashby Engineering Department Trumpington St. Cambridge CB2 1PZ United Kingdom ERG Inc. Attn: Mr. ...

  7. Property:Project Country | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    property. (previous 25) (next 25) M MHK Projects + United Kingdom + MHK Projects40MW Lewis project + United Kingdom + MHK ProjectsADM 3 + Ireland + MHK ProjectsADM 4 + United...

  8. Solent Enterprise Hub | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Name: Solent Enterprise Hub Place: United Kingdom Sector: Services Product: General Financial & Legal Services ( Government Public sector ) References: Solent Enterprise...

  9. Enterprise Fellowship Scheme EFS | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Fellowship Scheme (EFS) Place: United Kingdom Sector: Services Product: General Financial & Legal Services ( Academic Research foundation ) References: Enterprise...

  10. Reading Enterprise Hub | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Name: Reading Enterprise Hub Place: United Kingdom Sector: Services Product: General Financial & Legal Services ( Academic Research foundation ) References: Reading...

  11. Biocity Nottingham | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Jump to: navigation, search Name: Biocity Nottingham Place: United Kingdom Sector: Services Product: General Financial & Legal Services ( Government Public sector )...

  12. Search for: All records | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Article Publisher's Accepted Manuscript Journal Name: Subject: Identifier Numbers: ... Microbiota and Host Nutrition across Plant and Animal Kingdoms Hacquard, Stphane ; ...

  13. Westminster Energy Environment Transport Forum | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Westminster Energy Environment Transport Forum Jump to: navigation, search Name: Westminster Energy, Environment & Transport Forum Place: United Kingdom Product: String...

  14. EA-1123: Final Environmental Assessment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Transfer of Normal and Low-Enriched Uranium Billets to the United Kingdom, Hanford Site, Richland, Washington

  15. Bioconversion Technologies | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    to: navigation, search Name: Bioconversion Technologies Place: United Kingdom Sector: Biofuels Product: Second-generation biofuels technology developer References: Bioconversion...

  16. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    Braithwaite P Ove Arup Partners Birmingham United Kingdom ENVIRONMENTAL SCIENCES POLLUTION CONTROL BENTONITE CONTAINMENT SOILS REMEDIAL ACTION ENVIRONMENTAL TRANSPORT The...

  17. Containment barrier at Pride Park, Derby, England Barker, P....

    Office of Scientific and Technical Information (OSTI)

    P. Ove Arup & Partners, Birmingham (United Kingdom) 54 ENVIRONMENTAL SCIENCES; POLLUTION CONTROL; BENTONITE; CONTAINMENT; SOILS; REMEDIAL ACTION; ENVIRONMENTAL TRANSPORT The...

  18. EA-1123: Finding of No Significant Impact

    Energy.gov [DOE]

    Transfer of Normal and Low-Enriched Uranium Billets to the United Kingdom, Hanford Site, Richland, Washington

  19. Cambridge Enterprise | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Enterprise Jump to: navigation, search Name: Cambridge Enterprise Place: United Kingdom Sector: Services Product: General Financial & Legal Services ( Subsidiary Division )...

  20. Quantitative planar laser-induced fluorescence imaging of multi...

    Office of Scientific and Technical Information (OSTI)

    ... Kingdom) Department of Engineering Science, Oxford University, Parks Road, Oxford ... 33 ADVANCED PROPULSION SYSTEMS; DIRECT INJECTION ENGINES; GASOLINE; AIR; ...

  1. Structure of XC6422 from Xanthomonas campestris at 1.6 Å resolution...

    Office of Scientific and Technical Information (OSTI)

    ... Country of Publication: United Kingdom Language: English Subject: 75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; CRYSTAL STRUCTURE; CRYSTALS; DIFFRACTION; ...

  2. SETsquared Business Acceleration | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    SETsquared Business Acceleration Jump to: navigation, search Name: SETsquared Business Acceleration Place: United Kingdom Sector: Services Product: General Financial & Legal...

  3. International petroleum statistics report

    SciTech Connect

    Not Available

    1994-12-01

    This document is a monthly publication that provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand and trade in OECD countries.

  4. International petroleum statistics report

    SciTech Connect

    1995-10-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  5. International petroleum statistics report

    SciTech Connect

    1998-01-01

    This monthly publication provides international oil data for January 1998. The report presents data on oil production, demand, imports, and stocks in four sections. Section 1 containes time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. section 3 presents data on oil imports by OECD countries. Section 4 containes annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

  6. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H9. World installed geothermal generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 3 3 5 7 9 10 11 4.3 United States a 3 3 4 5 7 8 9 4.6 Canada 0 0 0 0 0 0 0 - Mexico and Chile 1 1 1 1 2 2 2 3.3 OECD

  7. Microsoft PowerPoint - BP 2030 Outlook (EIA conference Apr 2011).ppt

    Gasoline and Diesel Fuel Update

    BP Energy Outlook 2030 Washington, DC 26 April 2011 Energy Outlook 2030 2 © BP 2011 Global trends US particulars What can bend the trend? Outline Energy Outlook 2030 3 © BP 2011 Non-OECD economies drive consumption growth Billion toe Billion toe 0 2 4 6 8 10 12 14 16 18 1990 2000 2010 2020 2030 OECD Non-OECD 0 2 4 6 8 10 12 14 16 18 1990 2000 2010 2020 2030 Renewables Hydro Nuclear Coal Gas Oil * * Includes biofuels Energy Outlook 2030 4 © BP 2011 Gas and renewables win as fuel shares

  8. Greenhouse gas emission impacts of electric vehicles under varying driving cycles in various counties and US cities

    SciTech Connect

    Wang, M.Q.; Marr, W.W.

    1994-02-10

    Electric vehicles (EVs) can reduce greenhouse gas emissions, relative to emissions from gasoline-fueled vehicles. However, those studies have not considered all aspects that determine greenhouse gas emissions from both gasoline vehicles (GVs) and EVs. Aspects often overlooked include variations in vehicle trip characteristics, inclusion of all greenhouse gases, and vehicle total fuel cycle. In this paper, we estimate greenhouse gas emission reductions for EVs, including these important aspects. We select four US cities (Boston, Chicago, Los Angeles, and Washington, D.C.) and six countries (Australia, France, Japan, Norway, the United Kingdom, and the United States) and analyze greenhouse emission impacts of EVs in each city or country. We also select six driving cycles developed around the world (i.e., the US federal urban driving cycle, the Economic Community of Europe cycle 15, the Japanese 10-mode cycle, the Los Angeles 92 cycle, the New York City cycle, and the Sydney cycle). Note that we have not analyzed EVs in high-speed driving (e.g., highway driving), where the results would be less favorable to EVs; here, EVs are regarded as urban vehicles only. We choose one specific driving cycle for a given city or country and estimate the energy consumption of four-passenger compact electric and gasoline cars in the given city or country. Finally, we estimate total fuel cycle greenhouse gas emissions of both GVs and EVs by accounting for emissions from primary energy recovery, transportation, and processing; energy product transportation; and powerplant and vehicle operations.

  9. Factors affecting the remotely sensed response of coniferous forest plantations

    SciTech Connect

    Danson, F.M. ); Curran, P.J. )

    1993-01-01

    Remote sensing of forest biophysical properties has concentrated upon forest sites with a wide range of green vegetation amount and thereby leaf area index and canopy cover. However, coniferous forest plantations, an important forest type in Europe, are managed to maintain a large amount of green vegetation with little spatial variation. Therefore, the strength of the remotely sensed signal will, it is hypothesized, be determined more by the structure of this forest than by its cover. Airborne Thematic Mapper (ATM) and SPOT-1 HRV data were used to determine the effects of this structural variation on the remotely sensed response of a coniferous forest plantation in the United Kingdom. Red and near infrared radiance were strongly and negatively correlated with a range of structural properties and with the age of the stands but weakly correlated with canopy cover. A composite variable, related to the volume of the canopy, accounted for over 75% of the variation in near infrared radiance. A simple model that related forest structural variables to the remotely sensed response was used to understand and explain this response from a coniferous forest plantation.

  10. Lessons Learned From Gen I Carbon Dioxide Cooled Reactors

    SciTech Connect

    David E. Shropshire

    2004-04-01

    This paper provides a review of early gas cooled reactors including the Magnox reactors originating in the United Kingdom and the subsequent development of the Advanced Gas-cooled Reactors (AGR). These early gas cooled reactors shared a common coolant medium, namely carbon dioxide (CO2). A framework of information is provided about these early reactors and identifies unique problems/opportunities associated with use of CO2 as a coolant. Reactor designers successfully rose to these challenges. After years of successful use of the CO2 gas cooled reactors in Europe, the succeeding generation of reactors, called the High Temperature Gas Reactors (HTGR), were designed with Helium gas as the coolant. Again, in the 21st century, with the latest reactor designs under investigation in Generation IV, there is a revived interest in developing Gas Cooled Fast Reactors that use CO2 as the reactor coolant. This paper provides a historical perspective on the 52 CO2 reactors and the reactor programs that developed them. The Magnox and AGR design features and safety characteristics were reviewed, as well as the technologies associated with fuel storage, reprocessing, and disposal. Lessons-learned from these programs are noted to benefit the designs of future generations of gas cooled nuclear reactors.

  11. Accelerating Acceptance of Fuel Cell Backup Power Systems - Final Report

    SciTech Connect

    Petrecky, James; Ashley, Christopher

    2014-07-21

    Since 2001, Plug Power has installed more than 800 stationary fuel cell systems worldwide. Plug Power’s prime power systems have produced approximately 6.5 million kilowatt hours of electricity and have accumulated more than 2.5 million operating hours. Intermittent, or backup, power products have been deployed with telecommunications carriers and government and utility customers in North and South America, Europe, the United Kingdom, Japan and South Africa. Some of the largest material handling operations in North America are currently using the company’s motive power units in fuel cell-powered forklifts for their warehouses, distribution centers and manufacturing facilities. The low-temperature GenSys fuel cell system provides remote, off-grid and primary power where grid power is unreliable or nonexistent. Built reliable and designed rugged, low- temperature GenSys delivers continuous or backup power through even the most extreme conditions. Coupled with high-efficiency ratings, low-temperature GenSys reduces operating costs making it an economical solution for prime power requirements. Currently, field trials at telecommunication and industrial sites across the globe are proving the advantages of fuel cells—lower maintenance, fuel costs and emissions, as well as longer life—compared with traditional internal combustion engines.

  12. Word Pro - Untitled1

    Energy Information Administration (EIA) (indexed site)

    07 Table 7.5 Coal Exports by Country of Destination, Selected Years, 1960-2011 (Million Short Tons) Year Canada Brazil Europe Japan Other 3 Total Belgium 1 Denmark France Germany 2 Italy Nether- lands Spain Turkey United Kingdom Other 3 Total 1960 12.8 1.1 1.1 0.1 0.8 4.6 4.9 2.8 0.3 NA - 2.4 17.1 5.6 1.3 38.0 1965 16.3 1.2 2.2 (s) 2.1 4.7 9.0 3.4 1.4 NA (s) 2.3 25.1 7.5 .9 51.0 1966 16.5 1.7 1.8 (s) 1.6 4.9 7.8 3.2 1.2 NA (s) 2.5 23.1 7.8 1.0 50.1 1967 15.8 1.7 1.4 - 2.1 4.7 5.9 2.2 1.0 NA -

  13. SIMULATION OF THE ICELAND VOLCANIC ERUPTION OF APRIL 2010 USING THE ENSEMBLE SYSTEM

    SciTech Connect

    Buckley, R.

    2011-05-10

    The Eyjafjallajokull volcanic eruption in Iceland in April 2010 disrupted transportation in Europe which ultimately affected travel plans for many on a global basis. The Volcanic Ash Advisory Centre (VAAC) is responsible for providing guidance to the aviation industry of the transport of volcanic ash clouds. There are nine such centers located globally, and the London branch (headed by the United Kingdom Meteorological Office, or UKMet) was responsible for modeling the Iceland volcano. The guidance provided by the VAAC created some controversy due to the burdensome travel restrictions and uncertainty involved in the prediction of ash transport. The Iceland volcanic eruption provides a useful exercise of the European ENSEMBLE program, coordinated by the Joint Research Centre (JRC) in Ispra, Italy. ENSEMBLE, a decision support system for emergency response, uses transport model results from a variety of countries in an effort to better understand the uncertainty involved with a given accident scenario. Model results in the form of airborne concentration and surface deposition are required from each member of the ensemble in a prescribed format that may then be uploaded to a website for manipulation. The Savannah River National Laboratory (SRNL) is the lone regular United States participant throughout the 10-year existence of ENSEMBLE. For the Iceland volcano, four separate source term estimates have been provided to ENSEMBLE participants. This paper focuses only on one of those source terms. The SRNL results in relation to other modeling agency results along with useful information obtained using an ensemble of transport results will be discussed.

  14. Appendix A. Reference case projections

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    by region and end-use sector, High Oil Price case, 2010-40 (quadrillion Btu) Region History Projections Average annual percent change, 2010-40 2010 2020 2025 2030 2035 2040 OECD...

  15. Microsoft PowerPoint - EIA 2008 Energy Conference - Halff - 2008...

    Annual Energy Outlook

    of global oil market, > 60% of the OECD gasoline market *EIA data peerless in scope, detail, timeliness *Global price impact, beyond the US market *Easy target 3 April 7, ...

  16. International Petroleum Statistics Report, January 1994

    SciTech Connect

    Not Available

    1994-01-31

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  17. fossil fuels | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  18. policy | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  19. energy scenarios | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  20. Four new publications help advance renewable energy development...

    OpenEI (Open Energy Information) [EERE & EIA]

    energy becomes more competitive with fossil fuels in OECD countries, reports of this nature can go a long way to supporting more and more development. The four new reports in...

  1. Organisation for Economic Co-Operation and Development Feed ...

    OpenEI (Open Energy Information) [EERE & EIA]

    according to a new OECD report. Thu, 24 Sep 2015 17:36:00 GMT CLIMATE CHANGE: Support to fossil fuels remains high Government support to fossil fuel consumption and production in...

  2. January 12, 2009, Visiting Speakers Program - Status of a Key...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sources: IMF WEO (October '08), OECD, NSF Data, Battelle R&D Report, SPIE data *estimates ... Top 10 High-Tech Exporters Billions of 1997 USD: Council on Competitiveness 1986 2005 USA ...

  3. SEDS | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  4. Gapminder | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  5. Visualization Graph | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    8 August, 2012 - 12:37 New Gapminder Visualizations Added EIA Energy data Gapminder OECD OpenEI SEDS Visualization Graph OpenEI now features some cool new Gapminder...

  6. International petroleum statistics report

    SciTech Connect

    1996-12-01

    This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

  7. Secretary Chu to Lead Delegation to IEA Ministerial in Paris...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Secretary Chu to Speak at a Working Dinner on Global Energy Governance and the Challenges Ahead OECD Conference Centre News Media Contact: (202) 586-4940 Addthis Related Articles ...

  8. The International Energy Agency`s role in world-wide wind energy development

    SciTech Connect

    Rangi, R.; Ancona, D.

    1997-12-31

    Wind energy is now being deployed world-wide at a rapidly increasing rate and the International Energy Agency (IEA) has a changing role in its growth. IEA was founded in 1974 within the framework of the Organization for Economic Cooperation and Development (OECD) to collaborate on comprehensive international energy programs. IEA membership consists of eighteen parties from sixteen countries and the European Commission. Recently there has been increasing interest in IEA participation from both OECD and non-OECD countries. Non-OECD countries participating in various IEA Agreements include: China, India, Israel, Korea, and Russia. Because of its diverse international makeup, the IEA is viewed as a source of reliable technical and economic information. The World Bank has approached the Executive Committee for Wind Energy R & D, through the IEA Renewable Energy Working Party, to assist in the expansion of wind deployment. In addition, IEA is moving from R & D programs to include tracking of implementation incentives offered by its members.

  9. O

    Gasoline and Diesel Fuel Update

    O ECD/IEA 2 013 © O ECD/IEA 2 013 Interna'onal E nergy S ta's'cs and t he C hanging O il M ap E IA E nergy C onference Washington, D C, J une 1 8, 2 013 © O ECD/IEA 2 013 New map, new challenges © O ECD/IEA 2 013 Statistics versus the market  OECD d ata a re i ncreasingly l ess r epresenta've  OECD c ountries < 5 0% o f g lobal d emand  Ascent o f n on---OECD m eans l ess v isibility  Great s trides i n J ODI d ata, b ut s 'll r oom f or i mprovement  OECD c ountries h ave

  10. Word Pro - S11

    Gasoline and Diesel Fuel Update

    United States 0 4 8 12 16 20 24 May 2015 May 2016 Note: OECD is the Organization for Economic Cooperation and Development. Web Page: http:www.eia.govtotalenergydatamonthly...

  11. "U.S. Energy Information Administration"

    Energy Information Administration (EIA) (indexed site)

    A3. World gross domestic product (GDP) by region expressed in purchasing power parity, Reference case, 2011-40" "(Billion 2010 dollars)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",18615.81,19080.01,,23390.4,26576.73,29942.41,33569.18,37770.22,2.468839681 " United

  12. "U.S. Energy Information Administration"

    Energy Information Administration (EIA) (indexed site)

    A4. World gross domestic product (GDP) by region expressed in market exchange rates, Reference case, 2011-40" "(Billion 2010 dollars)" ,"History",,,"Projections",,,,,"Average annual percent change, 2012-40" ,2011,2012,,2020,2025,2030,2035,2040 "OECD" " OECD Americas",18006.08,18440.48,,22566.11,25584.58,28756.54,32165.64,36119.79,2.430102421 " United

  13. Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 Initial Modeling of a Pressurized Water Reactor Completed Using RELAP-7 January 29, 2013 - 12:06pm Addthis Schematic of the OECD PWR benchmark used in the initial RELAP-7 demonstration Schematic of the OECD PWR benchmark used in the initial RELAP-7 demonstration RELAP-7 is a nuclear reactor system safety analysis code. Development started in October 2011, and during the past quarter the initial

  14. International petroleum statistics report

    SciTech Connect

    1997-11-01

    This document is a monthly publication which provides current data on international oil production,demand,imports and stocks. This report has four sections which contain time series data on world oil production and oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Also included is oil supply/demand balance information for the world, and data on oil imports and trade by OECD countries.

  15. International Energy Outlook 2016-Executive Summary - Energy Information

    Gasoline and Diesel Fuel Update

    Administration Executive Summary print version The outlook for energy use worldwide presented in the International Energy Outlook 2016 (IEO2016) continues to show rising levels of demand over the next three decades, led by strong increases in countries outside of the Organization for Economic Cooperation and Development (OECD) [3], particularly in Asia. Non-OECD Asia, including China and India, account for more than half of the world's total increase in energy consumption over the 2012 to

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update

    J Kaya Identity factor projections * Carbon dioxide intensity * Energy intensity * GDP per capita * Population This page inTenTionally lefT blank 127 U.S. Energy Information Administration | International Energy Outlook 2016 Kaya Identity factor projections Table J1. World carbon dioxide intensity of energy use by region, Reference case, 2011-40 (metric tons per billion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas

  17. Strategy for isolating radioactive wastes in geological formations in Ukraine and organization of a collaboration of the countries of eastern Europe for scientific research

    SciTech Connect

    Umanets, M.P.; Nigmatullin, N.R.; Khrushchov, D.P.

    1995-10-01

    Large volumes of high- and medium-level radioactive wastes have now accumulated on the territory of Ukraine. They include spent nuclear fuel, technological wastes from nuclear power plants, fuel-containing mass and other wastes form the damaged power generating unit at the Chernobyl nuclear power plant. The total volume of wastes which must be removed amounts to about 60,000 tonnes. The published document is an abstract of the entire report.

  18. Evaluation of the utilities energy monitoring and control system installed at the US Army, Europe, Pirmasens and 97th Base Support Battalion, Germany

    SciTech Connect

    Broders, M.A.; McConnell, B.W.

    1992-01-01

    Authorized under an interagency agreements between the US Department of Energy and the US Army, evaluation of the utilities energy monitoring and control system (UEMCSs) operating at selected US Army installations in Heidelberg, Goeppingen, Pirmasens, and Baumholder, Germany, is nearing completion. This report specifically presents the results of the evaluation of the UEMCS installed at USAREUR, 21st Theater Army Area Command (TAACOM), Pirmasens and 97th Base Support Battalion, which is operated by the Directorate of Engineering and Housing (DEH) Utilities Division. The Oak Ridge National Laboratory (ORNL) was selected by Headquarters, USAREUR, Facilities Engineering Division, Utilities and Energy Branch in Heidelberg to evaluated the overall effectiveness and energy efficiency of UEMCSs at four US Army installations in Germany. The third of these systems to be evaluated, which is the scope of this report, is the UEMCS installed at Pirmasens. This evaluation relies upon existing data and information and does not involve introducing metering and instrumentation for the purpose of measuring installation energy use. The primary purpose of this evaluation is to take an in-depth look at the overall performance and effectiveness of the UEMCS installed at Pirmasens to see if it is achieving its operational objectives by resulting in energy and cost savings.

  19. CO-operation development project for new treatment of steam generator's - impact on final disposal volumes and recycling in Northern Europe

    SciTech Connect

    Wirendal, B.O.; Lindstrom, A.; Lindberg, M.; Hansson, T.

    2007-07-01

    This paper describes a real case of cost effective volume reduction of a retired, full size SG removed from the Ringhals Nuclear Power Plant, Sweden. The project is described from the first step of fulfilling the demands from the authorities before treatment to the results of the treatment. The evaluations of the method is also included and compared to the other possibilities and the driving forces that work in favour of our method. The waste owners' strategy is also described in this paper. Finally is the method of treatment described as a principle as well as the results. Technical details as well as detailed results are given in Paper 7131 [ref 1]. (authors)

  20. International petroleum statistics report

    SciTech Connect

    1996-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

  1. International petroleum statistics report, June 1995

    SciTech Connect

    1995-06-27

    The report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994. 4 figs., 45 tabs.

  2. International petroleum statistics report, November 1996

    SciTech Connect

    1996-11-01

    This report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 45 tabs.

  3. International petroleum statistics report, August 1995

    SciTech Connect

    1995-08-25

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  4. International petroleum statistics report, August 1994

    SciTech Connect

    Not Available

    1994-08-26

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  5. International petroleum statistics report

    SciTech Connect

    1995-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  6. International petroleum statistics report, March 1995

    SciTech Connect

    1995-03-30

    The International Petroleum Statistics Report presents data for March 1995 on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  7. International petroleum statistics report, November 1994

    SciTech Connect

    Not Available

    1994-11-25

    Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The International production, and on oil and stocks. The report has four sections. Section 1 contains time series data on world oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1983 through 1993.

  8. International petroleum statistics report, September 1995

    SciTech Connect

    1995-09-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994. 4 figs., 45 tabs.

  9. International petroleum statistics report

    SciTech Connect

    1995-07-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  10. International petroleum statistics report, December 1993

    SciTech Connect

    Not Available

    1993-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992. 41 tabs.

  11. International petroleum statistics report, April 1994

    SciTech Connect

    Not Available

    1994-04-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1993; OECD stocks from 1973 through 1993; and OECD trade from 1982 through 1992. 41 tables.

  12. International petroleum statistics report, February 1994

    SciTech Connect

    Not Available

    1994-02-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  13. International petroleum statistics report

    SciTech Connect

    1996-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  14. International petroleum statistics report, February 1997

    SciTech Connect

    1997-02-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 47 tabs.

  15. International petroleum statistics report, April 1999

    SciTech Connect

    1999-05-04

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance fore the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  16. International petroleum statistics report, March 1994

    SciTech Connect

    1994-03-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992.

  17. International petroleum statistics report, September 1993

    SciTech Connect

    Not Available

    1993-09-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1980, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1992; OECD stocks from 1973 through 1992; and OECD trade from 1982 through 1992. Data for the United States are developed by the Energy Information Administration (EIA) Office of Oil and Gas. Data for other countries are derived largely from published sources including International Energy Agency publications, the EIA International Energy Annual, and the trade press. (See sources after each section). All data are reviewed by the International Statistics Branch of EIA. All data have been converted to units of measurement familiar to the American public. Definitions of oil production and consumption are consistent with other EIA publications.

  18. International petroleum statistics report, September 1996

    SciTech Connect

    1996-09-27

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

  19. International petroleum statistics report, May 1999

    SciTech Connect

    1999-05-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 48 tabs.

  20. International petroleum statistics report, February 1999

    SciTech Connect

    1999-02-01

    The International petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970--1997; OECD stocks from 1973--1997; and OECD trade from 1987--1997.

  1. International petroleum statistics report, February 1996

    SciTech Connect

    1996-02-28

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

  2. International petroleum statistics report, January 1999

    SciTech Connect

    1999-01-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  3. International petroleum statistics report, January 1992. [Contains Glossary

    SciTech Connect

    1992-01-01

    The International Petroleum Statistics Report presents data on international oil production, consumption, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil consumption and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1980, and monthly data for the most two years. Section 2 presents an oil supply/consumption balance for the market economies (i.e., non-communist countries). This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, consumption, and trade in OECD countries. World oil production and OECD consumption data are for the years 1970 through 1990; OECD stocks from 1973 through 1990; and OECD trade from 1982 through 1990.

  4. International petroleum statistics report, March 1999

    SciTech Connect

    1999-03-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarter data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  5. International petroleum statistics report, August 1998

    SciTech Connect

    1998-08-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  6. International petroleum statistics report

    SciTech Connect

    1997-07-01

    The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

  7. International petroleum statistics report, June 1997

    SciTech Connect

    1997-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 46 tabs.

  8. International petroleum statistics report, September 1998

    SciTech Connect

    1998-09-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  9. International petroleum statistics report, October 1998

    SciTech Connect

    1998-10-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  10. International petroleum statistics report, April 1997

    SciTech Connect

    1997-04-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995. 4 figs., 47 tabs.

  11. International petroleum statistics report, February 1998

    SciTech Connect

    1998-02-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 48 tabs.

  12. International petroleum statistics report, June 1998

    SciTech Connect

    1998-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 48 tabs.

  13. International petroleum statistics report, May 1998

    SciTech Connect

    1998-05-01

    The International Petroleum Statistics report is a monthly publication that provides current international oil data. It presents data on international production, demand, imports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two year. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997, and OECD trade from 1987 through 1997. 4 fig., 48 tabs.

  14. International petroleum statistics report, November 1998

    SciTech Connect

    1998-11-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  15. International petroleum statistics report, June 1999

    SciTech Connect

    1999-06-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1990, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years and annually for the three years prior to that. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1998; OECD stocks from 1973 through 1998; and OECD trade from 1988 through 1998. 4 figs., 46 tabs.

  16. International petroleum statistics report, April 1998

    SciTech Connect

    1998-04-01

    The International Petroleum Statistics Report presents data on International oil production, demand, imports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1986 through 1996. 4 figs., 46 tabs.

  17. International petroleum statistics report, December 1998

    SciTech Connect

    1998-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  18. International petroleum statistics report, July 1998

    SciTech Connect

    1998-07-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1997; OECD stocks from 1973 through 1997; and OECD trade from 1987 through 1997. 4 figs., 46 tabs.

  19. International petroleum statistics report, December 1997

    SciTech Connect

    1997-12-01

    The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. The balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996. 4 figs., 46 tabs.

  20. International petroleum statistics report

    SciTech Connect

    1997-05-01

    The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.