National Library of Energy BETA

Sample records for insolation values represent

  1. Insolation integrator

    DOEpatents

    Dougherty, John J.; Rudge, George T.

    1980-01-01

    An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

  2. Photovoltaic Potential and Insolation Maps (Canada) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Insolation Maps (Canada) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Potential and Insolation Maps (Canada) Focus Area: Renewable Energy Topics:...

  3. Site insolation and wind power characteristics: technical report western region (south section)

    SciTech Connect

    1980-08-01

    This phase of the Site Insolation and Wind Power Characteristics Study was performed to provide statistical information on the expected future availability of solar and wind power at various sites in the Western Region (South Section) of the US Historic data (SOLMET), at 22 National Weather Service stations with hourly solar insolation and collateral meteorological information, were interrogated to provide an estimate of future trends. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Selected insolation and wind power conditions were investigated for their occurrence and persistence, for defined periods of time, on a monthly basis. Global horizontal insolation is related to inclined surfaces at each site. Ratios are provided, monthly, for multiplying global insolation to obtain insolation estimates on south-facing surfaces inclined at different angles with respect to the horizontal. Also, joint probability distribution tables are constructed showing the number of occurrences, out of a finite sample size, of daily average solar and wind power within selected intervals, by month. Information of this nature is intended as an aid to preliminary planning activities for the design and operation of solar and wind energy utilization and conversion systems.

  4. Differential Angstrom model for predicting insolation from hours of sunshine

    SciTech Connect

    Yeboah-Amankwah, D.; Agyeman, K.

    1990-01-01

    The Angstrom model for predicting insolation is limited in scope because it gives equal weighting to sunshine hours recorded at any time of the day. The differential Angstrom model presented in this paper removes this limitation and relates insolation, q{sub j}, in the j{sup th} hour to the sunshine duration, n{sub j}, of the same period by the equation: q{sub j} = a{sub j} + b{sub j}. By regression analysis of monthly data, the set of constants a{sub j} and b{sub j} for each hour of each month of the year can be determined. Thus, using the appropriate set of a and b regression coefficients, any sunshine data can be transformed to insolation. The sum of the equation over a day gives the daily insolation from which monthly means can be calculated. The method has been applied to the 1986 and 1988 sunshine data recorded at the University of Papua New Guinea to predict the observed insolation to within 3.5%. The differential Angstrom method has applications in places which have much recorded data on hours of sunshine but have limited observed insolation data.

  5. Site insolation and wind power characteristics. Summary report

    SciTech Connect

    Bray, R E

    1980-08-01

    Design and operation of either large or small scale solar and wind energy conversion systems should be based, in part, on knowledge of expected solar and wind power trends. For this purpose, historic solar and wind data available at 101 National Weather Service stations were processed statistically. Preliminary planning data are provided for selected daily average solar and wind power conditions occurring and persisting for time periods of interest. Solar data are global radiation incident on a horizontal surface, and wind data represent wind power normal to the air flow. Empirical probabilities were constructed from the historic data to provide a reasonable inference of the chance of similar climatological conditions occurring at any given time in the future. (Diurnal wind power variations were also considered.) Ratios were also generated at each station to relate the global radiation data to insolation on a south-facing surface inclined at various angles. In addition, joint probability distributions were derived to show the proportion of days with solar and wind power within selected intervals.

  6. IHT: Tools for Computing Insolation Absorption by Particle Laden Flows

    SciTech Connect

    Grout, R. W.

    2013-10-01

    This report describes IHT, a toolkit for computing radiative heat exchange between particles. Well suited for insolation absorption computations, it is also has potential applications in combustion (sooting flames), biomass gasification processes and similar processes. The algorithm is based on the 'Photon Monte Carlo' approach and implemented in a library that can be interfaced with a variety of computational fluid dynamics codes to analyze radiative heat transfer in particle-laden flows. The emphasis in this report is on the data structures and organization of IHT for developers seeking to use the IHT toolkit to add Photon Monte Carlo capabilities to their own codes.

  7. Facility Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-03-01

    This standard, DOE-STD-1063, Facility Representatives, defines the duties, responsibilities and qualifications for Department of Energy (DOE) Facility Representatives, based on facility hazard classification; risks to workers, the public, and the environment; and the operational activity level. This standard provides the guidance necessary to ensure that DOE’s hazardous nuclear and non-nuclear facilities have sufficient staffing of technically qualified facility representatives (FRs) to provide day-to-day oversight of contractor operations.

  8. Facility Representatives

    Energy Saver

    Program Manager Office of the Departmental Representative to the Defense Nuclear Facilities Safety Board (DOE DR-1) DOE Headquarters, Forrestal Building 1000 Independence ...

  9. ASHMET: a computer code for estimating insolation incident on tilted surfaces

    SciTech Connect

    Elkin, R.F.; Toelle, R.G.

    1980-05-01

    A computer code, ASHMET, has been developed by MSFC to estimate the amount of solar insolation incident on the surfaces of solar collectors. Both tracking and fixed-position collectors have been included. Climatological data for 248 US locations are built into the code. This report describes the methodology of the code, and its input and output. The basic methodology used by ASHMET is the ASHRAE clear-day insolation relationships modified by a clearness index derived from SOLMET-measured solar radiation data to a horizontal surface.

  10. Facility Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2006-04-06

    REPLACED BY DOE-STD-1063 | SUPERSEDING DOE-STD-1063-2000 (MARCH 2000) The purpose of the DOE Facility Representative Program is to ensure that competent DOE staff personnel are assigned to oversee the day-to-day contractor operations at DOE’s hazardous nuclear and non-nuclear facilities.

  11. Insolation data manual: long-term monthly averages of solar radiation, temperature, degree-days and global anti K/sub T/ for 248 national weather service stations

    SciTech Connect

    Knapp, C L; Stoffel, T L; Whitaker, S D

    1980-10-01

    Monthly averaged data is presented which describes the availability of solar radiation at 248 National Weather Service stations. Monthly and annual average daily insolation and temperature values have been computed from a base of 24 to 25 years of data. Average daily maximum, minimum, and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3/sup 0/C (65/sup 0/F). For each station, global anti K/sub T/ (cloudiness index) were calculated on a monthly and annual basis. (MHR)

  12. Insolation-oriented model of photovoltaic module using Matlab/Simulink

    SciTech Connect

    Tsai, Huan-Liang

    2010-07-15

    This paper presents a novel model of photovoltaic (PV) module which is implemented and analyzed using Matlab/Simulink software package. Taking the effect of sunlight irradiance on the cell temperature, the proposed model takes ambient temperature as reference input and uses the solar insolation as a unique varying parameter. The cell temperature is then explicitly affected by the sunlight intensity. The output current and power characteristics are simulated and analyzed using the proposed PV model. The model verification has been confirmed through an experimental measurement. The impact of solar irradiation on cell temperature makes the output characteristic more practical. In addition, the insolation-oriented PV model enables the dynamics of PV power system to be analyzed and optimized more easily by applying the environmental parameters of ambient temperature and solar irradiance. (author)

  13. UESC Training for Utility Representatives

    Energy.gov [DOE]

    Provides utility representatives with additional training to meet their responsibilities with respect to Utility Energy Savings Contracts (UESC).

  14. Value Engineering

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2002-12-30

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  15. Data structures and apparatuses for representing knowledge

    DOEpatents

    Hohimer, Ryan E; Thomson, Judi R; Harvey, William J; Paulson, Patrick R; Whiting, Mark A; Tratz, Stephen C; Chappell, Alan R; Butner, Robert S

    2014-02-18

    Data structures and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  16. CRAD, NNSA- Facility Representatives (FR)

    Office of Energy Efficiency and Renewable Energy (EERE)

    CRAD for Facility Representatives (FR). Criteria Review and Approach Documents (CRADs) that can be used to conduct a well-organized and thorough assessment of elements of safety and health programs.

  17. TEC Working Group Member Organizations Representatives | Department...

    Office of Environmental Management (EM)

    Member Organizations Representatives TEC Working Group Member Organizations Representatives PDF icon TEC MEMBER ORGANIZATION REPRESENTATIVES TOPIC GROUP PARTICIPATION February 2006...

  18. Facility Representative Qualification Equivalencies Based on...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Facility Representative Qualification Equivalencies Based on Previous Experience Facility Representative Qualification Equivalencies Based on Previous Experience The referenced ...

  19. VALUE STUDY

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PREPARED FOR: DEPARTMENT OF ENERGY OFFICE OF CONTRACT RESOURCES AND RESOURCE MANAGEMENT SEPTEMBER 2008 UPDATE BY: AON CONSULTING INC. FEBRUARY 1999 UPDATED SEPTEMBER 29, 2008 VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 Contents PART I Overview of Value Study Illustrative Flow

  20. Value Engineering

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2004-01-07

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  1. Value of Information spreadsheet

    DOE Data Explorer

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Júlíusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  2. Value of Information spreadsheet

    DOE Data Explorer

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  3. General Engineer/Physical Scientist (Facility Representative)

    Energy.gov [DOE]

    A successful candidate in this position will serve as an on-site senior technical representative, and Facility Representative, with responsibility for evaluating contractor environmental, nuclear...

  4. Authorizing Official Designated Representative (AODR) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Designated Representative (AODR) Authorizing Official Designated Representative (AODR) student-849822_960_720.jpg The Authorizing Official Designated Representative (AODR) provides technical and organizational support to the Authorizing Official (AO). Individual(s) in the AO Representative role must possess a working knowledge of: system function security policies technical security safeguards AODR Core Competency Training Worksheet (152.05

  5. Property Representatives Lists - HQ | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Property Representatives Lists - HQ Property Representatives Lists - HQ These are the current lists of Headquarters Property Representatives. If you have any questions please contact: Ellen Hall, Office of Logistics Operations, (301) 903-2613. Authorized Property Pass Signers List and Accountable Property Representatives List, Effective April 1, 2016 (106.12 KB) More Documents & Publications Directory Listings AU Functional Area Points of Contact by Office Directors Headquarters Facilities

  6. ACMP Handbook Contracting Officer's Representative (COR)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ACMP Handbook Contracting Officer's Representative (COR) December 22, 2011 1 Acquisition Career Management Handbook Certification and Appointment of Contracting Officer's Representative (COR) 1. PURPOSE a. U.S. Department of Energy (DOE) DOE has established this Contracting Officer's Representative (COR) Program to outline a comprehensive curriculum to systematically develop skill at performing delegated contract management duties; define competency based training standards to ensure that CORs

  7. DOE ORP Contracting Officer Representatives - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOE ORP Contracting Officer Representatives Office of River Protection About ORP ORP Projects & Facilities Newsroom Contracts & Procurements ORP Contracts & Procurements Home DOE-ORP Contract Management Plans DOE-ORP Prime Contracts DOE-ORP Contracting Officers DOE ORP Contracting Officer Representatives DOE ORP Purchase Card Buyers Contact ORP DOE ORP Contracting Officer Representatives Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size DESIGNATED COR

  8. DOE RL Contracting Officer Representatives - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Officer Representatives DOE-RL Contracts/Procurements RL Contracts & Procurements Home Prime Contracts Current Solicitations Other Sources DOE RL Contracting Officers DOE RL Contracting Officer Representatives DOE RL Contracting Officer Representatives Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size CO/COR Contract Number Company Acronym Limitations CHAPIN, DOUGLAS DE-DT0002699 CNG DE-DT0002699, CASCADE NATURAL GAS PIPELINE EIS (DOE/EIS-0476) PHASE 1, WITH

  9. Facility Representative Functional Area Qualification Standard

    Energy.gov [DOE] (indexed site)

    DOE-STD-1151-2010 October 2010 DOE STANDARD FACILITY REPRESENTATIVE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of ...

  10. FAQS Reference Guide – Facility Representative

    Office of Energy Efficiency and Renewable Energy (EERE)

    This reference guide addresses the competency statements in the October 2010 edition of DOE-STD-1151-2010, Facility Representative Functional Area Qualification Standard.

  11. Energy Conservation Program for Consumer Products: Representative...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    This document, concerning the Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy, is a notice issued by the Department of Energy. Though ...

  12. Facility Representative of the Year Award

    Energy.gov [DOE]

    The Facility Representative Award Program is a special award designed to recognize superior or exemplary service by a Facility Representative over a period of one year. This special award program has been established in accordance with the requirements of Department of Energy (DOE) Order 331.1C, Employee Performance Management and Recognition Program.

  13. Processes, data structures, and apparatuses for representing knowledge

    DOEpatents

    Hohimer, Ryan E.; Thomson, Judi R.; Harvey, William J.; Paulson, Patrick R.; Whiting, Mark A.; Tratz, Stephen C.; Chappell, Alan R.; Butner, R. Scott

    2011-09-20

    Processes, data structures, and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  14. Facility Representative Program, Criteria & Review Approach Documents

    Office of Energy Efficiency and Renewable Energy (EERE)

    This page provides Criteria Review and Approach Documents (CRADS) to assist Facility Representatives. Please submit your CRADS for posting by sending them to the HQ FR Program Manager. Please include the subject, date, and a contact person.

  15. PWR representative behavior during a LOCA

    SciTech Connect

    Allison, C.M.

    1981-01-01

    To date, there has been substantial analytical and experimental effort to define the margins between design basis loss-of-coolant accident (LOCA) behavior and regulatory limits on maximum fuel rod cladding temperature and deformation. As a result, there is extensive documentation on the modeling of fuel rod behavior in test reactors and design basis LOCA's. However, modeling of that behavior using representative, non-conservative, operating histories is not nearly as well documented in the public literature. Therefore, the objective of this paper is (a) to present calculations of LOCA induced behavior for Pressurized Water Reactor (PWR) core representative fuel rods, and (b) to discuss the variability in those calculations given the variability in fuel rod condition at the initiation of the LOCA. This analysis was limited to the study of changes in fuel rod behavior due to different power operating histories. The other two important parameters which affect that behavior, initial fuel rod design and LOCA coolant conditions were held invarient for all of the representative rods analyzed.

  16. Yucca Mountain Climate Technical Support Representative

    SciTech Connect

    Sharpe, Saxon E

    2007-10-23

    The primary objective of Project Activity ORD-FY04-012, “Yucca Mountain Climate Technical Support Representative,” was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  17. Sandia Energy - PV Value

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PV Value Home Stationary Power Energy Conversion Efficiency Solar Energy Photovoltaics Solar Market Transformation PV Value PV ValueTara Camacho-Lopez2015-06-12T20:36:38+00:0...

  18. Representing the vacuum polarization on de Sitter

    SciTech Connect

    Leonard, Katie E.; Woodard, Richard P.; Prokopec, Tomislav

    2013-03-15

    Previous studies of the vacuum polarization on de Sitter have demonstrated that there is a simple, noncovariant representation of it in which the physics is transparent. There is also a cumbersome, covariant representation in which the physics is obscure. Despite being unwieldy, the latter form has a powerful appeal for those who are concerned about de Sitter invariance. We show that nothing is lost by employing the simple, noncovariant representation because there is a closed form procedure for converting its structure functions to those of the covariant representation. We also present a vastly improved technique for reading off the noncovariant structure functions from the primitive diagrams. And we discuss the issue of representing the vacuum polarization for a general metric background.

  19. VALUE STUDY | Department of Energy

    Energy.gov [DOE] (indexed site)

    VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual...

  20. VALUE STUDY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    VALUE STUDY VALUE STUDY PDF icon VALUE STUDY More Documents & Publications Contractor Human Resources Management VALUE STUDY Value Study Desk Manual

  1. 1998 Annual Facility Representative Workshop Attendees | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy 998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees 1998 Annual Facility Representative Workshop Attendees (82.87 KB) More Documents & Publications 1999 Annual Facility Representative Workshop Attendees FTCP Members DOE Integrated Safety Management Champions List

  2. W&M Student Elected to Represent American Physical Society's...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    W&M Student Elected to Represent American Physical Society's Graduate Student Forum W&M Student Elected to Represent American Physical Society's Graduate Student Forum V Gray ...

  3. DOE-STD-1063-2000 - Facility Representatives

    Office of Environmental Management (EM)

    Joseph Arango, Facility Representative Program Manager Office of the Departmental Representative to the Defense Nuclear Facilities Safety Board (DOE S-3.1), DOE Headquarters, ...

  4. Office of Departmental Representative to DNFSB | Department of...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Office of Departmental Representative to DNFSB Mission The Department Representative to the Defense Nuclear Facilities Safety Board (DNFSB) provides effective cross-organizational ...

  5. 3Q CY2005 (PDF), Facility Representative Program Performance...

    Office of Environmental Management (EM)

    3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report...

  6. Representativeness-based Sampling Network Design for the State...

    Office of Scientific and Technical Information (OSTI)

    Representativeness-based Sampling Network Design for the State of Alaska Citation Details In-Document Search Title: Representativeness-based Sampling Network Design for the State...

  7. Representativeness-Based Sampling Network Design for the State...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Representativeness-Based Sampling Network Design for the State of Alaska Citation Details In-Document Search Title: Representativeness-Based Sampling Network...

  8. 4Q CY2000 (PDF), Facility Representative Program Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report ...

  9. Hanford Advisory Board Values

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of work are fundamental core values. Workers should receive appropriate training and programs should be in place to ensure a safety-conscious work environment, without...

  10. High coking value pitch

    SciTech Connect

    Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

    2014-06-10

    A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

  11. VALUE ENGINEERING.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    6 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS FOLLOW-ON INSPECTION OF THE DEPARTMENT OF ENERGY'S VALUE ENGINEERING PROGRAM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 20, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Follow-on Inspection of the Department of Energy's Value Engineering Program" BACKGROUND Value Engineering is a

  12. Sharing values, sharing a vision

    SciTech Connect

    Not Available

    1993-12-31

    Teamwork, partnership and shared values emerged as recurring themes at the Third Technology Transfer/Communications Conference. The program drew about 100 participants who sat through a packed two days to find ways for their laboratories and facilities to better help American business and the economy. Co-hosts were the Lawrence Livermore National Laboratory and the Lawrence Berkeley Laboratory, where most meetings took place. The conference followed traditions established at the First Technology Transfer/Communications Conference, conceived of and hosted by the Pacific Northwest Laboratory in May 1992 in Richmond, Washington, and the second conference, hosted by the National Renewable Energy Laboratory in January 1993 in Golden, Colorado. As at the other conferences, participants at the third session represented the fields of technology transfer, public affairs and communications. They came from Department of Energy headquarters and DOE offices, laboratories and production facilities. Continued in this report are keynote address; panel discussion; workshops; and presentations in technology transfer.

  13. Value of solar thermal industrial process heat

    SciTech Connect

    Brown, D.R.; Fassbender, L.L.; Chockie, A.D.

    1986-03-01

    This study estimated the value of solar thermal-generated industrial process heat (IPH) as a function of process heat temperature. The value of solar thermal energy is equal to the cost of producing energy from conventional fuels and equipment if the energy produced from either source provides an equal level of service. This requirement put the focus of this study on defining and characterizing conventional process heat equipment and fuels. Costs (values) were estimated for 17 different design points representing different combinations of conventional technologies, temperatures, and fuels. Costs were first estimated for median or representative conditions at each design point. The cost impact of capacity factor, efficiency, fuel escalation rate, and regional fuel price differences were then evaluated by varying each of these factors within credible ranges.

  14. Photovoltaics Value Analysis

    SciTech Connect

    Contreras, J.L.; Frantzis, L.; Blazewicz, S.; Pinault, D.; Sawyer, H.

    2008-02-01

    The goals of this report are to identify best practices in methodologies for estimating the value of distributed PV technologies, identify gaps in existing knowledge, and outline R&D opportunities.

  15. Value of Information References

    DOE Data Explorer

    Morency, Christina

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  16. Value of Information References

    DOE Data Explorer

    Morency, Christina

    2014-12-12

    This file contains a list of relevant references on value of information (VOI) in RIS format. VOI provides a quantitative analysis to evaluate the outcome of the combined technologies (seismology, hydrology, geodesy) used to monitor Brady's Geothermal Field.

  17. Earned Value Management

    Energy.gov [DOE]

    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the...

  18. HSEP Value Statement

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    7/9/2012 HSEP Value Statement Safe and environmentally conscious performance of work is our fundamental core value. Integrated Safety Management should be used as the principal vehicle to protect the worker and the environment, and to guide work planning of all types. This includes practicing the proper principles of behavior conducive to a positive safety culture and incorporating safety and environmental risk identification and mitigation in facility designs. Workers should receive appropriate

  19. 1999 FACILITY REPRESENTATIVE CONFERENCE June 21 – 25, 1999

    Energy.gov [DOE]

    The Department of Energy will host the Facility Representative Annual Meeting on June 21-25, 1999 at the Alexis Park Hotel in Las Vegas, Nevada. The meeting will give Facility Representatives and...

  20. Percent of Commercial Natural Gas Deliveries in California Represented...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    California Represented by the Price (Percent) Percent of Commercial Natural Gas Deliveries in California Represented by the Price (Percent) Year Jan Feb Mar Apr May Jun Jul Aug Sep ...

  1. FACILITY REPRESENTATIVE PROGRAM STATUS, 6/21/1999

    Energy.gov [DOE]

    Since September, 1993, the Office of Field Management has served as the Department’s corporate advocate for the Facility Representative Program. The Facility Representative (FR) is a critical...

  2. Percent of Industrial Natural Gas Deliveries in New Mexico Represented...

    Energy Information Administration (EIA) (indexed site)

    Mexico Represented by the Price (Percent) Percent of Industrial Natural Gas Deliveries in New Mexico Represented by the Price (Percent) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct ...

  3. Table 2. Value and average value of photovoltaic module shipments...

    Energy Information Administration (EIA) (indexed site)

    Value and average value of photovoltaic module shipments, 2015" "Module value, total ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report' Note: ...

  4. 4Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quarterly Report | Department of Energy 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators Quarterly Report is attached, covering the period from October to December 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, 063, and reported

  5. 1Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quarterly Report | Department of Energy Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from January 2000 to March 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, DOE-STD-1

  6. Core Values | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Core Values What we do and how we do it is determined by our core values. Our core values are how we operate and what we value most. They are the qualities that define our culture...

  7. Social Values | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Social Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleSocialValues&oldid612345...

  8. Economic Values | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Economic Values Jump to: navigation, search Retrieved from "http:en.openei.orgwindex.php?titleEconomicValues&oldid612356...

  9. The value of volunteering

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    volunteering Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:November 2, 2016 all issues All Issues » submit The value of volunteering Volunteers help fill gaps in staffing at regional nonprofits March 1, 2016 Betty Ehart Senior Center staffer Susie Eash challenges Pat Day on their daily match of "Aggravation." Betty Ehart Senior Center staffer Susie Eash challenges Pat Day on their daily match of Aggravation. Contacts

  10. Departmental Representative to the Defense Nuclear Facilities Safety Board

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (DNFSB) | Department of Energy Departmental Representative to the Defense Nuclear Facilities Safety Board (DNFSB) Departmental Representative to the Defense Nuclear Facilities Safety Board (DNFSB) The Office of the Departmental Representative ensures effective cross-organizational leadership and coordination to resolve DNFSB-identified technical and management issues as we work to ensure the health, safety, and security of the workers, public, and environment. This web site is an important

  11. CNS represented at inaugural Energetics Consortium | Y-12 National Security

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Complex represented at ... CNS represented at inaugural Energetics Consortium Posted: February 16, 2016 - 6:53pm CNS was well represented at the first National Energetic Materials Consortium. About 70 university researchers and government and industry experts from across the country, including Consolidated Nuclear Security employees, joined forces at the first ever National Energetic Materials Consortium hosted by Texas Tech University. Pantex's Christopher Young said, "There are a

  12. Facility Representative, Technical Area (TA-55) Plutonium Facility, Los

    National Nuclear Security Administration (NNSA)

    Alamos Site Office | National Nuclear Security Administration | (NNSA) Facility Representative, Technical Area (TA-55) Plutonium Facility, Los Alamos Site Office John Krepps John Krepps June 2010 U.S. Department of Energy Facility Representative of the Year John Krepps, a facility representative for the National Nuclear Security Administration's (NNSA) Los Alamos Site Office, received the Department of Energy's top award for oversight of nuclear and non-nuclear facilities. Krepps, a Los

  13. Herbert Richardson: Before The U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    on Energy and Commerce Subcommittee on Oversight and Investigations Herbert Richardson: Before The U.S. House of Representatives Committee on Energy and Commerce Subcommittee on ...

  14. Dr. Kelli Joseph, NYISO Representing the ISO-RTO Council

    Energy.gov [DOE] (indexed site)

    Kelli Joseph, NYISO Representing the ISO-RTO Council July 28, 2014 DOE Quadrennial Energy Review Gas Electric Interdependencies: Coordination Efforts, Regional Issues, and...

  15. Appointment of Contracting Officers and Contracting Officer Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2004-04-21

    The Order established procedures governing the selection, appointment and termination of Department of Energy contracting officers and contracting officer representatives. Supersedes DOE O 541.1A.

  16. Chapter 1: Energy Challenges | Representative DOE Energy and...

    Energy.gov [DOE] (indexed site)

    Energy and Science Program Workshops ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology Review 2015 Representative DOE Energy and Science Program ...

  17. Value Study Desk Manual

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PREPARED FOR: DEPARTMENT OF ENERGY Office of Contractor Human Resources Policy Division September 26, 2012 UPDATE VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 28, 2008 Update Prepared for: DOE By: Aon Hewitt Inc. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 26, 2012

  18. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value PV Value PV Value Sandia National Laboratories has developed a prospective model of determining the value of PV. Sandia uses an income capitalization approach, which considers the present value of future energy production to determine the remaining value of a PV system. An online tool developed by Energy Sense Finance, has been released to the public. https://www.pvvalue.com/ PV Value (332.15 KB) More Documents & Publications PV Value® Reduce Risk, Increase Clean Energy: How States

  19. The Value of Distributed Solar Electric Generation to San Antonio

    SciTech Connect

    Jones, Nic; Norris, Ben; Meyer, Lisa

    2013-02-14

    This report presents an analysis of value provided by grid-connected, distributed PV in San Antonio from a utility perspective. The study quantified six value components, summarized in Table ES- 1. These components represent the benefits that accrue to the utility, CPS Energy, in accepting solar onto the grid. This analysis does not treat the compensation of value, policy objectives, or cost-effectiveness from the retail consumer perspective.

  20. The value of money

    SciTech Connect

    Rudd, M.S.

    1995-12-01

    Today, more than ever before, power plant engineers find themselves in a new arena of competition. It is no longer enough to address the technical problems. Today is also an era of financial competition. This is not just competition in the sense of {open_quotes}the enemy out there{close_quotes}. Engineers are competing with a myriad of other good projects within their own company for precious budget dollars. Utility budget scrutiny is increasing every year. To be successful, engineers have to be prepared to justify their projects in clear, measurable terms that withstand management`s scrutiny. Today`s engineer is faced with a technical and financial challenge and must be prepared if he or she is to succeed. This paper addresses methods used at the Northern Indiana Public Service Company for justification of feedwater heater replacements. Though only a suggested method; it is nonetheless a method that has worked well. This paper covers how a feedwater heater replacement is evaluated, from the identified need to the proposed solution. Expectations are defined. Realistic assessments are made. Measurement criteria is established, in advance. Responsibility is assigned. The project is evaluated on its technical and financial merits, reflecting today`s {open_quotes}value of money{close_quotes}.

  1. Ames Laboratory represented in ISU Homecoming Parade | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    represented in ISU Homecoming Parade On Sunday, Oct. 23, a group of about two dozen Ames Laboratory staff marched in the 2016 ISU Homecoming parade through downtown Ames. Marchers distributed candy and 70th anniversary bookmarks to the crowd.

  2. Department of Defense Representatives Visit Hanford to Benchmark Safety

    Energy.gov [DOE]

    RICHLAND, Wash., December 16, 2005, Representatives of the Department of Defense's (DoD's) Voluntary Protection Program Center of Excellence (VPP CX) working to reduce injuries at selected (DoD)...

  3. Changes to the Facility Representative Program, 10/26/1999

    Office of Energy Efficiency and Renewable Energy (EERE)

    Effective October 1, 1999, the Deputy Secretary tasked this office to manage the Facility Representative Program. We look forward to working with you in continuing and improving this very important...

  4. Appointment of Contracting Officers and Contracting Officer Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1996-04-30

    To establish procedures governing the selection, appointment, and termination of contracting officers and for the appointment of contracting officer representatives. Cancels DOE Order 4200.4A. Canceled by DOE O 541.1A.

  5. Utility Energy Service Contracts Training for Utility Representatives

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar targets Federal staff, as well as utility representatives, and provides an understanding of the legal parameters, contracting requirements, financing options, and other aspects of utility energy service contracts (UESC).

  6. U.S. Representative Frank Lucas and Oklahoma State Senator

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 U.S. Representative Frank Lucas and Oklahoma State Senator David Myers recently voiced ... Though the SGP central facility and activity hub near Lamont, Oklahoma, has 31 employees ...

  7. Radionuclide Interaction and Transport in Representative Geologic Media |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Radionuclide Interaction and Transport in Representative Geologic Media Radionuclide Interaction and Transport in Representative Geologic Media The report presents information related to the development of a fundamental understanding of disposal-system performance in a range of environments for potential wastes that could arise from future nuclear fuel cycle alternatives. It addresses selected aspects of the development of computational modeling capability for the

  8. DOE Representative to World Institute of Nuclear Safety (WINS) | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) DOE Representative to World Institute of Nuclear Safety (WINS) Lisa G. Hilliard Lisa Hilliard August 2009 NNSA Administrator's Silver Award Lisa G. Hilliard has received the NNSA Administrator's Silver Award for her sustained distinguished accomplishments as the Office Director of the DOE office to the U.S. Mission to International Organizations in Vienna from May 1993 to April 2009, serving four Ambassadors, two interim Representatives, and six

  9. Prestack mid-value filtering

    SciTech Connect

    Changlian, X. )

    1992-01-01

    This paper describes mid-value filtering, a specific nonlinear smoothing filtering, and widely used in graphic processing, etc. Mid-value filtering before stack of seismic data can remove wild value (inconceivable particular big value) and improve signal-noise ratio. In view of big data volume before stack, computation efficiency of mid-value filtering is critical to its feasibility. The algorithm used here is sufficiently based on the properties of mid-value filtering, so that the computation efficiency is greatly improved. It is experimentally shown that prestack mid-value filtering can quite well eliminate wild value, abnormal traces as well as surface waves, and raise signal-noise ratio. After lateral low frequency noises are removed by high pass filtering, mid-value filtering works better.

  10. Landscape Characterization and Representativeness Analysis for Understanding Sampling Network Coverage

    DOE Data Explorer

    Maddalena, Damian; Hoffman, Forrest; Kumar, Jitendra; Hargrove, William

    2014-08-01

    Sampling networks rarely conform to spatial and temporal ideals, often comprised of network sampling points which are unevenly distributed and located in less than ideal locations due to access constraints, budget limitations, or political conflict. Quantifying the global, regional, and temporal representativeness of these networks by quantifying the coverage of network infrastructure highlights the capabilities and limitations of the data collected, facilitates upscaling and downscaling for modeling purposes, and improves the planning efforts for future infrastructure investment under current conditions and future modeled scenarios. The work presented here utilizes multivariate spatiotemporal clustering analysis and representativeness analysis for quantitative landscape characterization and assessment of the Fluxnet, RAINFOR, and ForestGEO networks. Results include ecoregions that highlight patterns of bioclimatic, topographic, and edaphic variables and quantitative representativeness maps of individual and combined networks.

  11. Landscape Characterization and Representativeness Analysis for Understanding Sampling Network Coverage

    DOE Data Explorer

    Maddalena, Damian; Hoffman, Forrest; Kumar, Jitendra; Hargrove, William

    Sampling networks rarely conform to spatial and temporal ideals, often comprised of network sampling points which are unevenly distributed and located in less than ideal locations due to access constraints, budget limitations, or political conflict. Quantifying the global, regional, and temporal representativeness of these networks by quantifying the coverage of network infrastructure highlights the capabilities and limitations of the data collected, facilitates upscaling and downscaling for modeling purposes, and improves the planning efforts for future infrastructure investment under current conditions and future modeled scenarios. The work presented here utilizes multivariate spatiotemporal clustering analysis and representativeness analysis for quantitative landscape characterization and assessment of the Fluxnet, RAINFOR, and ForestGEO networks. Results include ecoregions that highlight patterns of bioclimatic, topographic, and edaphic variables and quantitative representativeness maps of individual and combined networks.

  12. Interpolated Sounding Value-Added Product

    SciTech Connect

    Troyan, D

    2013-04-01

    The Interpolated Sounding (INTERPSONDE) value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), and surface meteorological instruments in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of at least 266 altitude levels. This VAP is part of the Merged Sounding (MERGESONDE) suite of VAPs. INTERPSONDE is the profile of the atmospheric thermodynamic state created using the algorithms of MERGESONDE without including the model data from the European Centre for Medium-range Weather Forecasting (ECMWF). More specifically, INTERPSONDE VAP represents an intermediate step within the larger MERGESONDE process.

  13. PV Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value is a web-based tool that calculates the energy production value for a residential or commercial photovoltaic (PV) system. The tool is Uniform Standards of Progressional ...

  14. Appointment of Contracting Officers and Contracting Officer's Representatives

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2000-10-27

    To establish procedures governing the selection, appointment, and termination of contracting officers and for the appointment of contracting officer's representatives. To ensure that only trained and qualified procurement and financial assistance professionals, within the scope of this Order, serve as contracting officers. Cancels DOE O 541.1. Canceled by DOE O 541.1B.

  15. WIPP Representative Selected For National Environmental Justice Advisory Board

    Energy.gov [DOE]

    CARLSBAD, N.M. – Organizers say no similar opportunity or conference exists in America. In April, representatives from federal and state agencies, local governments, tribes, communities, business, academia and other groups will gather in Washington, D.C. for the 2012 National Environmental Justice Conference and Training Program.

  16. Facility Representative Qualification Equivalencies Based on Previous Experience

    Energy.gov [DOE]

    The purpose of this Memorandum is to provide guidance, Attachment 1, to Qualifying Officials (QO) on how to use the cross-walk, Attachment 2, in granting equivalencies to Facility Representative (FR) candidates using the most current FR Functional Area Qualification Standards, DOE-STD-1151-2010.

  17. Value of Energy Storage for Grid Applications

    SciTech Connect

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  18. Quantum physics and human values

    SciTech Connect

    Stapp, H.P.

    1989-09-01

    This report discusses the following concepts: the quantum conception of nature; the quantum conception of man; and the impact upon human values. (LSP).

  19. The value of energy data

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The value of energy data DOE SSL Program Connected Lighting Meeting November 16, 2015 2 ... methods, passfail criteria 13 DOE SSL Program activities: energy reporting Based ...

  20. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-03-13

    This Guide provides approaches for implementing the Earned Value Management System (EVMS) requirements of DOE O 413.3B. Supersedes DOE G 413.3-10.

  1. The Business Value of Superior Energy Performance

    SciTech Connect

    McKane, Aimee; Scheihing, Paul; Evans, Tracy; Glatt, Sandy; Meffert, William

    2015-08-04

    Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing the collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.

  2. Single-point representative sampling with shrouded probes

    SciTech Connect

    McFarland, A.R.; Rodgers, J.C.

    1993-08-01

    The Environmental Protection Agency (EPA) prescribed methodologies for sampling radionuclides in air effluents from stacks and ducts at US Department of Energy (DOE) facilities. Requirements include use of EPA Method 1 for the location of sampling sites and use of American National Standards Institute (ANSI) N13.1 for guidance in design of sampling probes and the number of probes at a given site. Application of ANSI N13.1 results in sampling being performed with multiprobe rakes that have as many as 20 probes. There can be substantial losses of aerosol particles in such sampling that will degrade the quality of emission estimates from a nuclear facility. Three alternate methods, technically justified herein, are proposed for effluent sampling. First, a shrouded aerosol sampling probe should replace the sharp-edged elbowed-nozzle recommended by ANSI. This would reduce the losses of aerosol particles in probes and result in the acquisition of more representative aerosol samples. Second, the rakes of multiple probes that are intended to acquire representative samples through spatial coverage should be replaced by a single probe located where contaminant mass and fluid momentum are both well mixed. A representative sample can be obtained from a well-mixed flow. Some effluent flows will need to be engineered to achieve acceptable mixing. Third, sample extraction should be performed at a constant flow rate through a suitable designed shrouded probe rather than at a variable flow rate through isokinetic probes. A shrouded probe is shown to have constant sampling characteristics over a broad range of stack velocities when operated at a fixed flow rate.

  3. Advisory Board Seats New Student Representative | Department of Energy

    Office of Environmental Management (EM)

    Dispatchability | Department of Energy Advancing Concentrating Solar Power Technology, Performance, and Dispatchability Advancing Concentrating Solar Power Technology, Performance, and Dispatchability Advancing Concentrating Solar Power Technology, Performance, and Dispatchability Energy storage will help enable CSP compete by adding flexibility value to a high-variable-generation (solar plus wind) power system (see Mehos et al. 2016). Compared with PV, CSP systems are more complex to

  4. SEPARATION OF SCANDIUM VALUES FORM IRON VALUES BY SOLVENT EXTRACTION

    DOEpatents

    Kuhlman, C.W. Jr.; Lang, G.P.

    1961-12-19

    A process is given for separating scandium from trivalent iron values. In this process, an aqueous nitric acid solution is contacted with a water- immiscible alkyl phosphate solution, the aqueous solution containing the values to be separated, whereby the scandium is taken up by the alkyl phosphate. The aqueous so1ution is preferably saturated with magnesium nitrate to retain the iron in the aqueous solution. (AEC)

  5. Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples

    SciTech Connect

    Shine, E. P.; Poirier, M. R.

    2013-10-29

    Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and

  6. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2012-03-13

    To support DOE's initiatives to improve program, project, and contract management through the implementation and surveillance of a contractor's Earned Value Management System (EVMS) that is in conformance with DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, the American National Standards Institute/Electronic Industries Alliance (ANSI/EIA)-748-B, Earned Value Management System (or as required by contract), and Federal Acquisition Regulation (FAR) 52.234-4, Earned Value Management System (EVMS). Admin Chg 1 dated 10-22-2015.

  7. CMI Values | Critical Materials Institute

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Values CMI Values -- we listen, we are safe, we collaborate, we respect, we move fast, we are agile, we are responsible, and we deliver. We Listen: We are driven by the needs of technology and our best information comes from our industry partners. We Are Safe: We conduct all of our work in a manner that protects our workers, the public and the environment. We Collaborate: We bring together the best available expertise to solve the problems at hand. We Respect: We treat each other well and value

  8. Survey to determine the value of DYNA

    SciTech Connect

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA's value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and DYNA-like'' codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl DYNA-like'' codes: Has a commercial market developed for DYNA-like'' codes This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of DYNA-like'' codes or codes like DYNA.'' Several of the DYNA-like'' codes used DYNA as their core. These codes are descendants of DYNA.

  9. Survey to determine the value of DYNA

    SciTech Connect

    Walter, J.W.; Bellshaw, D.

    1993-01-01

    This report presents the value of the DYNA software program to US Industry. The software conducts dynamic finite element analysis tailored specifically to simulating high energy impacts, such as car crashes or aircraft collisions with birds. DYNA is available at nearly zero cost to the public in two-dimensional (DYNA2D) and three-dimensional versions (DYNA3D). DYNA has had a major impact on US industry. Measuring this impact using conventional approaches, such as profitability or revenue size, does not apply to DYNA. A new approach is needed that will capture DYNA`s value to US industry. Our challenge was two fold: (1) to develop a methodology for valuing technology transferred to the public domain; and (2) to apply this methodology to DYNA. We accomplished the evaluation task by using indirect measurements of value. These indicators encompassed three broad categories, answering three key questions: (1) Use of DYNA and ``DYNA-like`` codes: Are companies, academic institutions, government agencies actually using DYNA and codes like it? (2) Savings generated from using these codes: Is the use of DYNA and codes like it creating a positive economic impact (3) Market size of afl ``DYNA-like`` codes: Has a commercial market developed for ``DYNA-like`` codes? This study represents the results of interviews with people identified by Lawrence Livermore National Laboratory (LLNL) as users of DYNA. Some of the people surveyed for this study do not use DYNA. They rely upon other dynamic finite element analysis codes. We refer to these individuals as users of ``DYNA-like`` codes or ``codes like DYNA.`` Several of the ``DYNA-like`` codes used DYNA as their core. These codes are descendants of DYNA.

  10. The Korarchaeota: Archaeal orphans representing an ancestral lineage of life

    SciTech Connect

    Elkins, James G.; Kunin, Victor; Anderson, Iain; Barry, Kerrie; Goltsman, Eugene; Lapidus, Alla; Hedlund, Brian; Hugenholtz, Phil; Kyrpides, Nikos; Graham, David; Keller, Martin; Wanner, Gerhard; Richardson, Paul; Stetter, Karl O.

    2007-05-01

    Based on conserved cellular properties, all life on Earth can be grouped into different phyla which belong to the primary domains Bacteria, Archaea, and Eukarya. However, tracing back their evolutionary relationships has been impeded by horizontal gene transfer and gene loss. Within the Archaea, the kingdoms Crenarchaeota and Euryarchaeota exhibit a profound divergence. In order to elucidate the evolution of these two major kingdoms, representatives of more deeply diverged lineages would be required. Based on their environmental small subunit ribosomal (ss RNA) sequences, the Korarchaeota had been originally suggested to have an ancestral relationship to all known Archaea although this assessment has been refuted. Here we describe the cultivation and initial characterization of the first member of the Korarchaeota, highly unusual, ultrathin filamentous cells about 0.16 {micro}m in diameter. A complete genome sequence obtained from enrichment cultures revealed an unprecedented combination of signature genes which were thought to be characteristic of either the Crenarchaeota, Euryarchaeota, or Eukarya. Cell division appears to be mediated through a FtsZ-dependent mechanism which is highly conserved throughout the Bacteria and Euryarchaeota. An rpb8 subunit of the DNA-dependent RNA polymerase was identified which is absent from other Archaea and has been described as a eukaryotic signature gene. In addition, the representative organism possesses a ribosome structure typical for members of the Crenarchaeota. Based on its gene complement, this lineage likely diverged near the separation of the two major kingdoms of Archaea. Further investigations of these unique organisms may shed additional light onto the evolution of extant life.

  11. Earned Value Management System (EVMS)

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2008-05-06

    The Guide supports the Departments initiatives to improve program, project, and contract management through the implementation and surveillance of contractors earned value management systems. Canceled by DOE G 413.3-10A.

  12. Core Values | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Core Values Core Values People - People are our most important resource. We respect and use our experience and skills and appreciate our diversity. Business Excellence - We are fiscally responsible and actively pursue best business practices. Safety - We protect our human and material resources and promote safe work practices within the office and at our sites. Communication - We take full advantage of our virtual organization's strengths and share information freely across all levels of the

  13. Simulating a Nationally Representative Housing Sample Using EnergyPlus

    SciTech Connect

    Hopkins, Asa S.; Lekov, Alex; Lutz, James; Rosenquist, Gregory; Gu, Lixing

    2011-03-04

    This report presents a new simulation tool under development at Lawrence Berkeley National Laboratory (LBNL). This tool uses EnergyPlus to simulate each single-family home in the Residential Energy Consumption Survey (RECS), and generates a calibrated, nationally representative set of simulated homes whose energy use is statistically indistinguishable from the energy use of the single-family homes in the RECS sample. This research builds upon earlier work by Ritchard et al. for the Gas Research Institute and Huang et al. for LBNL. A representative national sample allows us to evaluate the variance in energy use between individual homes, regions, or other subsamples; using this tool, we can also evaluate how that variance affects the impacts of potential policies. The RECS contains information regarding the construction and location of each sampled home, as well as its appliances and other energy-using equipment. We combined this data with the home simulation prototypes developed by Huang et al. to simulate homes that match the RECS sample wherever possible. Where data was not available, we used distributions, calibrated using the RECS energy use data. Each home was assigned a best-fit location for the purposes of weather and some construction characteristics. RECS provides some detail on the type and age of heating, ventilation, and air-conditioning (HVAC) equipment in each home; we developed EnergyPlus models capable of reproducing the variety of technologies and efficiencies represented in the national sample. This includes electric, gas, and oil furnaces, central and window air conditioners, central heat pumps, and baseboard heaters. We also developed a model of duct system performance, based on in-home measurements, and integrated this with fan performance to capture the energy use of single- and variable-speed furnace fans, as well as the interaction of duct and fan performance with the efficiency of heating and cooling equipment. Comparison with RECS revealed

  14. Wave propagation in equivalent continuums representing truss lattice materials

    DOE PAGES [OSTI]

    Messner, Mark C.; Barham, Matthew I.; Kumar, Mukul; Barton, Nathan R.

    2015-07-29

    Stiffness scales linearly with density in stretch-dominated lattice meta-materials offering the possibility of very light yet very stiff structures. Current additive manufacturing techniques can assemble structures consisting of these lattice materials, but the design of such structures will require accurate, efficient simulation techniques. Equivalent continuum models have several advantages over discrete truss models of stretch dominated lattices, including computational efficiency and ease of model construction. However, the development an equivalent model suitable for representing the dynamic response of a periodic truss is complicated by microinertial effects. This paper derives a dynamic equivalent continuum model for periodic truss structures and verifiesmore » it against detailed finite element simulations. The model must incorporate microinertial effects to accurately reproduce long-wavelength characteristics of the response such as anisotropic elastic soundspeeds. The formulation presented here also improves upon previous work by preserving equilibrium at truss joints for affine lattice deformation and by improving numerical stability by eliminating vertices in the effective yield surface.« less

  15. Photovoltaics Value Clearinghouse | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Photovoltaics Value Clearinghouse Jump to: navigation, search The Photovoltaics Value Clearinghouse was developed by NREL and Clean Power Research.1 The PV Value Clearinghouse is...

  16. Core Values Postcard | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Core Values Postcard Document Number: NA Effective Date: 09/2014 File (public): PDF icon Print_CoreValuesPostcard

  17. Process for recovering actinide values

    DOEpatents

    Horwitz, E. Philip; Mason, George W.

    1980-01-01

    A process for rendering actinide values recoverable from sodium carbonate scrub waste solutions containing these and other values along with organic compounds resulting from the radiolytic and hydrolytic degradation of neutral organophosphorous extractants such as tri-n butyl phosphate (TBP) and dihexyl-N,N-diethyl carbamylmethylene phosphonate (DHDECAMP) which have been used in the reprocessing of irradiated nuclear reactor fuels. The scrub waste solution is preferably made acidic with mineral acid, to form a feed solution which is then contacted with a water-immiscible, highly polar organic extractant which selectively extracts the degradation products from the feed solution. The feed solution can then be processed to recover the actinides for storage or recycled back into the high-level waste process stream. The extractant is recycled after stripping the degradation products with a neutral sodium carbonate solution.

  18. Examination of Hydrate Formation Methods: Trying to Create Representative Samples

    SciTech Connect

    Kneafsey, T.J.; Rees, E.V.L.; Nakagawa, S.; Kwon, T.-H.

    2011-04-01

    Forming representative gas hydrate-bearing laboratory samples is important so that the properties of these materials may be measured, while controlling the composition and other variables. Natural samples are rare, and have often experienced pressure and temperature changes that may affect the property to be measured [Waite et al., 2008]. Forming methane hydrate samples in the laboratory has been done a number of ways, each having advantages and disadvantages. The ice-to-hydrate method [Stern et al., 1996], contacts melting ice with methane at the appropriate pressure to form hydrate. The hydrate can then be crushed and mixed with mineral grains under controlled conditions, and then compacted to create laboratory samples of methane hydrate in a mineral medium. The hydrate in these samples will be part of the load-bearing frame of the medium. In the excess gas method [Handa and Stupin, 1992], water is distributed throughout a mineral medium (e.g. packed moist sand, drained sand, moistened silica gel, other porous media) and the mixture is brought to hydrate-stable conditions (chilled and pressurized with gas), allowing hydrate to form. This method typically produces grain-cementing hydrate from pendular water in sand [Waite et al., 2004]. In the dissolved gas method [Tohidi et al., 2002], water with sufficient dissolved guest molecules is brought to hydrate-stable conditions where hydrate forms. In the laboratory, this is can be done by pre-dissolving the gas of interest in water and then introducing it to the sample under the appropriate conditions. With this method, it is easier to form hydrate from more soluble gases such as carbon dioxide. It is thought that this method more closely simulates the way most natural gas hydrate has formed. Laboratory implementation, however, is difficult, and sample formation is prohibitively time consuming [Minagawa et al., 2005; Spangenberg and Kulenkampff, 2005]. In another version of this technique, a specified quantity of gas

  19. Moisture Management for High R-Value Walls

    SciTech Connect

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    This report explains the moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study. In this project, hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones. The modeling program assessed the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage; the report presents results of the study.

  20. Tailored Marketing for Low-income and Under-Represented Population...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Tailored Marketing for Low-income and Under-Represented Population Segments (201) Tailored Marketing for Low-income and Under-Represented Population Segments (201) Better Buildings ...

  1. Value Study Desk Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Value Study Desk Manual Value Study Desk Manual Updated September 26, 2012. Memo from Robert Myers regarding DOE Benefit Value Desk Manual (56.76 KB) Value Study Desk Manual (1005.83 KB) More Documents & Publications Contractor Human Resources Management VALUE STUDY VALUE STUDY

  2. ADSORPTION METHOD FOR SEPARATING THORIUM VALUES FROM URANIUM VALUES

    DOEpatents

    Boyd, G.E.; Russell, E.R.; Schubert, J.

    1959-08-01

    An improved ion exchange method is described for recovery of uranium and thorium values as separate functions from an aqueous acidic solution containing less than 10/sup -3/ M thorium ions and between 0.1 and 1 M uranyl ions. The solution is passed through a bed of cation exchange resin in the acid form to adsorb all the thorium ions and a portion of the uranyl ions. The uranium is eluted by means of aqueous 0.1 to 0.4 M sulfuric acid. The thorium may then be stripped from the resin by elution with aqueous 0.5 M oxalic acid.

  3. Station-based Surface Data Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    51 Station-based Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately

  4. Shale Oil Value Enhancement Research

    SciTech Connect

    James W. Bunger

    2006-11-30

    Raw kerogen oil is rich in heteroatom-containing compounds. Heteroatoms, N, S & O, are undesirable as components of a refinery feedstock, but are the basis for product value in agrochemicals, pharmaceuticals, surfactants, solvents, polymers, and a host of industrial materials. An economically viable, technologically feasible process scheme was developed in this research that promises to enhance the economics of oil shale development, both in the US and elsewhere in the world, in particular Estonia. Products will compete in existing markets for products now manufactured by costly synthesis routes. A premium petroleum refinery feedstock is also produced. The technology is now ready for pilot plant engineering studies and is likely to play an important role in developing a US oil shale industry.

  5. Chapter 48 - Value Engineering | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8 - Value Engineering Chapter 48 - Value Engineering PDF icon 48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology...

  6. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Earned Value Management Earned Value Management Earned Value Management The mission of the DOE Earned Value Management website is to educate and train on theory and practice of Earned Value Management, and use it as an integrated Project Management process. Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides both the government and contractors the ability to examine

  7. Facility Representatives

    Energy.gov [DOE] (indexed site)

    ... Guidance for Hazard Analysis-Emergency Planning for Extremely Hazardous Substances; or ... DOE-STD-1063-2011 13 f. Minor events or problems are frequently clues that indicate ...

  8. Josh Allen of Richland Operations Office Named 2014 Facility Representative of the Year

    Energy.gov [DOE]

    Congratulations to Josh Allen, Richland Operations Office, the winner of the 2014 DOE Facility Representative of the Year Award!

  9. Validation and Analysis of HRRR Insolation Forecasts using Surfrad...

    Office of Scientific and Technical Information (OSTI)

    Resource Type: Conference Resource Relation: Conference: Proceedings of the World Renewable Energy Forum, 13-17 May 2012, Denver, Colorado (CD-ROM) Publisher: Boulder, CO: American ...

  10. IHT: Tools for Computing Insolation Absorption by Particle Laden Flows

    Energy Science and Technology Software Center

    2013-09-17

    INT is a toolkit for computing radiative heat exchange between particles. The algorithm is based on the the 'Photon Monte Carlo" approach described by Wang and Modest and implemented as a library that can be interfaced with a variety of CFD codes to analyze radiative heat transfer in particle laden flows.

  11. What every designated representative should know about Title IV and Title V enforcement provisions

    SciTech Connect

    Bischoff, C.A.; Dayal, P.

    1995-12-31

    Title IV of the Clean Air Act not only created a regulatory program unlike any other under the Clean Air Act, but also established a unique position--the designated representative--as an integral part of the program. The designated representative is required to meet certain basic obligations under Title IV, and a panoply of enforcement mechanisms are available to EPA in the event of noncompliance with these obligations. Also, because a designated representative may take on responsibilities under the permit provisions of Title V of the Clean Air Act, the designated representative can also be subject to an enforcement action for failure to comply with certain Title V permit requirements. This paper considers the basic definition of the designated representative under EPA`s Title IV and Title V regulations, identifies the responsibilities assigned to the designated representative, and then analyzes the enforcement mechanisms that may be applied to the designated representative if a regulatory responsibility has not been satisfied.

  12. The use of probability techniques in value-based planning

    SciTech Connect

    Rau, N.S. (National Renewable Energy Lab., Golden, CO (United States))

    1994-11-01

    Present techniques used in value-based planning do not properly represent neither the durations of capacity outage nor the effects of outage on post-interruption demand. Generation outage models do not relate the expected quantum of shortages to particular durations of outage. A model is proposed to compute this expectation by using the generator outage statistics in its entirety. The application of this model to the IEEE test system gave different results, depending on which outage cost data were used. Consequently, there is a need for a uniform procedure to report outage costs. A bottom-up procedure based on end use is proposed as a possibility.

  13. A global approach of the representativity concept: Application on a high-conversion light water reactor MOX lattice case

    SciTech Connect

    Santos, N. D.; Blaise, P.; Santamarina, A.

    2013-07-01

    The development of new types of reactor and the increase in the safety specifications and requirements induce an enhancement in both nuclear data knowledge and a better understanding of the neutronic properties of the new systems. This enhancement is made possible using ad hoc critical mock-up experiments. The main difficulty is to design these experiments in order to obtain the most valuable information. Its quantification is usually made by using representativity and transposition concepts. These theories enable to extract some information about a quantity of interest (an integral parameter) on a configuration, but generally a posteriori. This paper presents a more global approach of this theory, with the idea of optimizing the representativity of a new experiment, and its transposition a priori, based on a multiparametric approach. Using a quadratic sum, we show the possibility to define a global representativity which permits to take into account several quantities of interest at the same time. The maximization of this factor gives information about all quantities of interest. An optimization method of this value in relation to technological parameters (over-clad diameter, atom concentration) is illustrated on a high-conversion light water reactor MOX lattice case. This example tackles the problematic of plutonium experiment for the plutonium aging and a solution through the optimization of both the over-clad and the plutonium content. (authors)

  14. Doppler Lidar Wind Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 Doppler Lidar Wind Value-Added Product RK Newsom C Sivaraman TR Shippert LD Riihimaki ... DOESC-ARMTR-148 Doppler Lidar Wind Value-Added Product Version 1.0 RK Newsom C Sivaraman ...

  15. Classification of subsurface objects using singular values derived from signal frames

    DOEpatents

    Chambers, David H; Paglieroni, David W

    2014-05-06

    The classification system represents a detected object with a feature vector derived from the return signals acquired by an array of N transceivers operating in multistatic mode. The classification system generates the feature vector by transforming the real-valued return signals into complex-valued spectra, using, for example, a Fast Fourier Transform. The classification system then generates a feature vector of singular values for each user-designated spectral sub-band by applying a singular value decomposition (SVD) to the N.times.N square complex-valued matrix formed from sub-band samples associated with all possible transmitter-receiver pairs. The resulting feature vector of singular values may be transformed into a feature vector of singular value likelihoods and then subjected to a multi-category linear or neural network classifier for object classification.

  16. Value of Information Evaluation using Field Data

    SciTech Connect

    Trainor-Guitton, W.

    2015-06-15

    Value of information (VOI) provides the ability to identify and prioritize useful information gathering for a geothermal prospect, either hydrothermal or for enhanced geothermal systems. Useful information provides a value greater than the cost of the information; wasteful information costs more than the expected value of the information. In this project we applied and refined VOI methodologies on selected geothermal prospects.

  17. core values | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    core values Livermore Field Office sets core values as part of continuous improvement process At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, Reliable, Ethical We are responsible stewards of federal resources Collaboration - Communicate, Support, Team-Focused

  18. Value of Energy Storage for Grid Applications (Report Summary) (Presentation)

    SciTech Connect

    Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M.

    2013-06-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  19. The Value of Energy Storage for Grid Applications

    SciTech Connect

    Denholm, Paul; Jorgenson, Jennie; Hummon, Marissa; Jenkin, Thomas; Palchak, David; Kirby, Brendan; Ma, Ookie; O'Malley, Mark

    2013-05-01

    This analysis evaluates several operational benefits of electricity storage, including load-leveling, spinning contingency reserves, and regulation reserves. Storage devices were simulated in a utility system in the western United States, and the operational costs of generation was compared to the same system without the added storage. This operational value of storage was estimated for devices of various sizes, providing different services, and with several sensitivities to fuel price and other factors. Overall, the results followed previous analyses that demonstrate relatively low value for load-leveling but greater value for provision of reserve services. The value was estimated by taking the difference in operational costs between cases with and without energy storage and represents the operational cost savings from deploying storage by a traditional vertically integrated utility. The analysis also estimated the potential revenues derived from a merchant storage plant in a restructured market, based on marginal system prices. Due to suppression of on-/off-peak price differentials and incomplete capture of system benefits (such as the cost of power plant starts), the revenue obtained by storage in a market setting appears to be substantially less than the net benefit provided to the system. This demonstrates some of the additional challenges for storage deployed in restructured energy markets.

  20. Secretary Chu to Join Representatives Lofgren and Honda at the SLAC

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    National Accelerator Laboratory | Department of Energy Representatives Lofgren and Honda at the SLAC National Accelerator Laboratory Secretary Chu to Join Representatives Lofgren and Honda at the SLAC National Accelerator Laboratory August 13, 2010 - 12:00am Addthis Washington, D.C. - On Monday, U.S. Energy Secretary Steven Chu will visit the SLAC National Accelerator Laboratory in Menlo Park, California. Secretary Chu will join Representatives Zoe Lofgren and Mike Honda and Stanford

  1. Gregory H. Friedman: Before The U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Government Reform Subcommittee on the Federal Workforce and Agency Organization | Department of Energy The U.S. House of Representatives Committee on Government Reform Subcommittee on the Federal Workforce and Agency Organization Gregory H. Friedman: Before The U.S. House of Representatives Committee on Government Reform Subcommittee on the Federal Workforce and Agency Organization April 5 2005 Before The U.S. House of Representatives Committee on Government Reform Subcommittee on the

  2. Gregory H. Friedman: Before the U.S. House Of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Commerce Subcommittee on Oversight and Investigations | Department of Energy Of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Gregory H. Friedman: Before the U.S. House Of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations May 1, 2003 Before the U.S. House Of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Statement of Gregory H. Friedman,

  3. Gregory H. Friedman: Before the U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Commerce Subcommittee on Oversight and Investigations | Department of Energy of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations February 26, 2003 Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Statement of Gregory H. Friedman,

  4. Herbert Richardson: Before The U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Commerce Subcommittee on Oversight and Investigations | Department of Energy Herbert Richardson: Before The U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Herbert Richardson: Before The U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations March 4, 2004 Before The U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and

  5. Gregory H. Friedman: Before the U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Commerce Subcommittee on Oversight and Investigations | Department of Energy U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations May 1, 2002 Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Statement of Gregory H.

  6. 3Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2007. Data for these indicators are gathered by Field...

  7. 3Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    The Facility Representative Program Indicators (Pis) Quarterly Report attached, covering the period from July to September 2000. Data for these indicators are gathered by the Field elements...

  8. DOE-STD-1151-2002; Facility Representative Functional Area Qualificati...

    Energy Saver

    DOE STANDARD FACILITY REPRESENTATIVE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. ...

  9. 2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from April to June 2008. Data for these indicators aregathered by Field elements...

  10. Gregory H. Friedman: Before The U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gregory H. Friedman: Before The U.S. House of Representatives Committee on Government ... Organization Statement of Gregory H. Friedman, Inspector General U.S. Department of ...

  11. Gregory H. Friedman: Before the U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    on Energy and Commerce Subcommittee on Oversight and Investigations Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on ...

  12. 2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2006. Data for these indicators are gathered by Field elements...

  13. 4Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative Program Performance Indicators (Pis) Quarterly Report Covering the Period from October to December 2002. Data for these indicators are gathered by Field...

  14. 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2005. Data for these indicators are gathered by Field...

  15. 1Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2005. Data for these indicators are gathered by Field elements...

  16. DOE Orders Self-Study Program- DOE-STD-1063-2011, Facility Representatives

    Energy.gov [DOE]

    U.S. Department of Energy Orders Self-Study Program DOE-STD-1063-2011, Facility Representatives Familiar Level - August 2011

  17. Tailored Marketing for Low-income and Under-Represented Population Segments (201)

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Tailored Marketing for Low-Income and Under-Represented Population Segments (201), call slides and discussion summary.

  18. 2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2005. Data for these indicators are gathered by Field elements...

  19. 1Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January through March 2012. Data for these indicators were...

  20. 4Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2005. Data for these indicators are gathered by Field...

  1. 4Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period October through December 2010. Data for these...

  2. 2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by field elements...

  3. 1Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2007. Data for these indicators are gathered by Field elements...

  4. 3Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    This memorandum summarizes the highlights of the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period of July through September 2010. Data for these...

  5. 4Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October through December 2011. Data for these indicators were...

  6. 3Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2006. Data for these indicators are gathered by Field...

  7. 4Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2006. Data for these indicators are gathered by Field...

  8. 2Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period April through June 20 1 1. Data for these indicators were gathered...

  9. 1Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period January through March 2011. Data for these indicators were gathered...

  10. 2Q CY2012 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April through June 2012. Data for these indicators were...

  11. 3Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the Period July  through September 2011. Data for these indicators were gathered...

  12. 2Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    This memorandum summarizes the highlight of, and announces the availablity on-line of, the Facility Representative (FR) Program Performance Indicators are gathered by Field elements quarterly per...

  13. 4Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from October to December 2007. Data for these indicators aregathered by Field...

  14. Acquisition Career Management Program Handbook, Partial Revision of Chapter 11, Contracting Officer's Representative

    Energy.gov [DOE]

    The purpose of this flash is to provide interim guidance for certifying and appointing Contracting Officer's Representatives. This guidance complies with the Office of Federal Procurement Policy memorandum, Revisions to the Federal Acquisition Certification for Contracting Officer's Representatives (FAC-COR), dated September 6, 2011 with an effective date of January 1, 2012.

  15. Solar Energy and Capacity Value (Fact Sheet)

    SciTech Connect

    Not Available

    2013-09-01

    This is a one-page, two-sided fact sheet on the capacity of solar power to provide value to utilities and power system operators.

  16. Capacity Value of Concentrating Solar Power Plants

    SciTech Connect

    Madaeni, S. H.; Sioshansi, R.; Denholm, P.

    2011-06-01

    This study estimates the capacity value of a concentrating solar power (CSP) plant at a variety of locations within the western United States. This is done by optimizing the operation of the CSP plant and by using the effective load carrying capability (ELCC) metric, which is a standard reliability-based capacity value estimation technique. Although the ELCC metric is the most accurate estimation technique, we show that a simpler capacity-factor-based approximation method can closely estimate the ELCC value. Without storage, the capacity value of CSP plants varies widely depending on the year and solar multiple. The average capacity value of plants evaluated ranged from 45%?90% with a solar multiple range of 1.0-1.5. When introducing thermal energy storage (TES), the capacity value of the CSP plant is more difficult to estimate since one must account for energy in storage. We apply a capacity-factor-based technique under two different market settings: an energy-only market and an energy and capacity market. Our results show that adding TES to a CSP plant can increase its capacity value significantly at all of the locations. Adding a single hour of TES significantly increases the capacity value above the no-TES case, and with four hours of storage or more, the average capacity value at all locations exceeds 90%.

  17. Photovoltaics Value Analysis | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Tool Summary LAUNCH TOOL Name: Photovoltaics Value Analysis Focus Area: Renewable Energy Topics: Environmental Website: www.nrel.govanalysispdfs42303.pdf Equivalent URI:...

  18. PV Value® | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PV Value® PV Value® PV Value® is a free solar PV Valuation tool that answers the question of "How much is solar PV worth" and is compliant with the Uniform Standards of Professional Appraisal Practice. It is available for and being used by real estate appraisers, realtors, homeowners, commercial building owners, home builders, solar installers, green raters, insurance companies, and mortgage lenders in all 50 states along with D.C. and Puerto Rico. PV Value® allows for the

  19. Analytic Challenges to Valuing Energy Storage

    SciTech Connect

    Ma, Ookie; O'Malley, Mark; Cheung, Kerry; Larochelle, Philippe; Scheer, Rich

    2011-10-25

    Electric grid energy storage value. System-level asset focus for mechanical and electrochemical energy storage. Analysis questions for power system planning, operations, and customer-side solutions.

  20. Shared Value in Utility and Efficiency Partnerships

    Energy.gov [DOE]

    Residential Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local utilities and energy efficiency programs.

  1. ZERH Architect Training: Understanding the Value, Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Architect Training: Understanding the Value, Technology and Benefits of the Zero Energy ... Consumer demand for market options that offer improved comfort, health, safety, resale ...

  2. Earned Value Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    development. DOE EVMS Risk Assessment Matrix - (MS Word) Formulas and Terminology "Gold Card" - September 2011 Road Show Presentation: Enhancing Earned Value (EV) Analysis Using ...

  3. Analytic Challenges to Valuing Energy Storage

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    analytical task. Market Conditions - Markets are continually evolving, and the long-term value of energy storage is difficult to capture. Niche markets have emerged, but...

  4. Austin Energy- Value of Solar Residential Rate

    Energy.gov [DOE]

    Note: In August 2014, the City Council of Austin, Texas, enacted Resolution No. 20140828, which directed program changes to the Value of Solar Tariff as follows:

  5. On time-optimal NMR control of states of qutrits represented by quadrupole nuclei with the spin I = 1

    SciTech Connect

    Zobov, V. E. Shauro, V. P.

    2011-08-15

    Elementary logical operators (selective rotation, Fourier transform, controllable phase shift, and SUM gate) are considered for a quantum computer based on three-level systems (qutrits) represented by nuclear spins I = 1 under nuclear magnetic resonance conditions. The computer simulation of the realization of these operators by means of simple and composite selective radiofrequency (RF) pulses and optimized RF pulses is performed. The time dependence of the amplitude of last pulses is found by numerical optimization at different durations. Two variants are proposed for realization of a two-qutrit SUM gate by using one-qutrit or two-qutrit optimized RF pulses. The calculated time dependences of realization errors were used to study the time optimality of different methods for obtaining gates, proposed earlier and in this paper. The advantages and disadvantages of each of the methods are evaluated for different values of physical parameters.

  6. COST OF ADDRESSING TARGETS OF UNEQUAL VALUE

    SciTech Connect

    G.H. CANAVAN

    2001-08-01

    The formalism for evaluating first strike costs and incentives for military targeting generalize to include higher value targets. That introduces two new allocations to the usual allocation between missiles and military targets, but they can be performed analytically. As the number of weapons on each side decreases, the optimal fraction of second strike weapons allocated to military values falls. The shift to high value targets is more pronounced below about 1,000 weapons for nominal parameters. Below 500 weapons the first striker's cost of action drops below its cost of inaction. A strike would induce a second strike of about 250 weapons on high value targets. An increase in the first striker's preference for damage to the other's high value targets increases or a decrease in its preference for preventing damage to its own high value targets decreases first strike costs and stability margins. Including defenses complicates allocations slightly. The main effect is increased attrition of second strikes, particularly at larger defenses, which makes it possible to significantly reduce damage to high value targets. At 1,000 weapons, by 300 to 400 interceptors the first striker's costs are reduced to 30% below that of inaction and the number of weapons delivered on the first striker's high value targets is reduced to about 100.

  7. Applying vitrification to meet customers` values

    SciTech Connect

    Roy, B. [Scientific Ecology Group, Inc., Oak Ridge, TN (United States)

    1996-03-01

    Cost-effective waste management solutions that maximize customer value require a thorough and flexible evaluation and integration of approaches, technology applications, and disposal options. This is particulary true in the application of vitrification to low-level radioactive and mixed waste stabilization. Case-specific evaluations are the required to determine the highest value, most cost-effective approaches.

  8. Secretary Chu: China's Clean Energy Successes Represent a New "Sputnik

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Moment" for America | Department of Energy Chu: China's Clean Energy Successes Represent a New "Sputnik Moment" for America Secretary Chu: China's Clean Energy Successes Represent a New "Sputnik Moment" for America November 29, 2010 - 12:00am Addthis Washington, D.C. - In a speech at the National Press Club, U.S Energy Secretary Steven Chu said that the success of China and other countries in clean energy industries represents a new "Sputnik Moment" for the

  9. Sensitivity and representativity analysis of past experiments with respect to ABTR system.

    SciTech Connect

    Aliberti, G.; Palmiotti, G.; Salvatores, M.

    2007-08-29

    A comprehensive validation analysis has been performed that incorporates representativity of multiple parameters, experiments, reference designs, and adjustment of the nuclear data. The work involves a new representativity study among selected reactor designs and several experiments. Application, using existing experiments, to reference design like the ABTR and the SFR has demonstrated that it is possible to achieve a significant reduction of uncertainty on the main integral parameters of interest for their neutronic design. This is possible when the set of available experiments are relevant (i.e. representative of the reference designs), of good quality (i.e. of reduced uncertainty on experimental results), and consistent (i.e. not providing conflictive information).

  10. 3Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September 2009. Data for these indicators are gathered by Field...

  11. 4Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from October to December 2009. Data for these indicators are gathered by Field...

  12. 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from April to June  2009. Data for these indicators are gathered by Field elements...

  13. 2Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from April 2000 to June 2000. Data for these indicators are gathered by the Field...

  14. 1Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March 2009. Data for these indicators are gathered by Field...

  15. 3Q C&2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September   2008. Data for these indicators aregathered by Field...

  16. John C. Barnes of Savannah River Operations named 2012 Facility Representative of the Year

    Energy.gov [DOE]

    About 200 Department of Energy (DOE) federal employees are Facility Representatives (FR) who provide day-to-day oversight of contractor operations at DOE facilities. Each year the Department...

  17. Gregory H. Friedman: Before the U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Government Reform Gregory H. Friedman: Before the U.S. House of Representatives Committee ... Statement of Gregory H. Friedman Inspector General, U.S. Department of Energy Request to ...

  18. Gregory H. Friedman: Before the U.S. House of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and ... Statement of Gregory H. Friedman, Inspector General U.S. Department of Energy Testify on ...

  19. Gregory H. Friedman: Before the U.S. House Of Representatives...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gregory H. Friedman: Before the U.S. House Of Representatives Committee on Energy and ... Statement of Gregory H. Friedman, Inspector General U.S. Department of Energy Request to ...

  20. 1Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March2010. Data for these indicators are gathered by Field...

  1. 3Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from July to September  2003. Data for these indicators are gathered by Field...

  2. 1Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from January to March  2003. Data for these indicators are gathered by Field...

  3. 2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from April to June  2003. Data for these indicators are gathered by Field elements...

  4. 4Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from October to December  2004. Data for these indicators are gathered by Field...

  5. 2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from April to June  2004. Data for these indicators are gathered by Field elements...

  6. 4Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from October to December  2003. Data for these indicators are gathered by Field...

  7. 3Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from July to September  2004. Data for these indicators are gathered by Field...

  8. U.S. Energy Secretary Steven Chu, U.S. Representatives Larson...

    Energy Saver

    U.S. Representative Joe Courtney WHAT: Tour of United Technologies Research Center WHEN: 9:45 AM EST **Media availability to follow Media are requested to park in the lot ...

  9. Stan Watkins Named Department of Energy Facility Representative of the Year

    National Nuclear Security Administration (NNSA)

    | National Nuclear Security Administration | (NNSA) Stan Watkins Named Department of Energy Facility Representative of the Year May 15, 2009 Microsoft Office document icon R-09-02

  10. 1Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January  to March 2006. Data for these indicators are gathered by Field...

  11. 4Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from October to December   2008. Data for these indicators are  gathered by Field...

  12. W&M Student Elected to Represent American Physical Society's Graduate

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Student Forum | Jefferson Lab W&M Student Elected to Represent American Physical Society's Graduate Student Forum W&M Student Elected to Represent American Physical Society's Graduate Student Forum V Gray Valerie Gray, a graduate student at The College of William and Mary and a researcher at the Department of Energy's Thomas Jefferson National Accelerator Facility, was chosen this year by American Physical Society members as chair-elect for the APS Forum on Graduate Student Affairs.

  13. Gregory H. Friedman: Before the U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Commerce Subcommittee on Oversight and Investigations | Department of Energy Energy and Commerce Subcommittee on Oversight and Investigations Gregory H. Friedman: Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations April 5, 2005 Before the U.S. House of Representatives Committee on Energy and Commerce Subcommittee on Oversight and Investigations Statement of Gregory H. Friedman, Inspector General U.S. Department of

  14. Gregory H. Friedman: Before the U.S. House of Representatives Committee on

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Government Reform | Department of Energy Government Reform Gregory H. Friedman: Before the U.S. House of Representatives Committee on Government Reform March 20, 2003 Before the U.S. House of Representatives Committee on Government Reform Statement of Gregory H. Friedman Inspector General, U.S. Department of Energy Request to testify on the Department of Energy's (Department) contract administration activities. The Department is one of the most contractor dependent agencies in the Federal

  15. Chapter 48 - Value Engineering | Department of Energy

    Energy.gov [DOE] (indexed site)

    48ValueEngineering0.pdf More Documents & Publications Audit Report: OAS-L-07-08 Emerging Lighting Technology Microsoft PowerPoint - 12 Holman White PM Conference 2010 Rev 2...

  16. ARM - Value-Added Product Status Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Status Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2015 (PDF, 1MB) ARM Climate Research Facility

  17. Value of Flexibility in the Markets

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Value of Flexibility in the Markets * Basic overview of the SPP and MISO markets * Potential benefit to some SPA customers of using markets to schedule energy * Increasing need for ancillary services, and the value of ancillary services in the markets 3 From presentation by ERCOT: Operational Challenges due to High Wind * Higher frequency deviations due to large system excursions * Inadequate transmission for projected wind growth * Constraint management under high and low wind * Difficulty in

  18. Potential value of Cs-137 capsules

    SciTech Connect

    Bloomster, C.H.; Brown, D.R.; Bruno, G.A.; Hazelton, R.F.; Hendrickson, P.L.; Lezberg, A.J.; Tingey, G.L.; Wilfert, G.L.

    1985-04-01

    We determined the value of Cs-137 compared to Co-60 as a source for the irradiation of fruit (apples and cherries), pork and medical supplies. Cs-137, in the WESF capsule form, had a value of approximately $0.40/Ci as a substitute for Co-60 priced at approximately $1.00/Ci. The comparison was based on the available curies emitted from the surface of each capsule. We developed preliminary designs for fourteen irradiation facilities; seven were based on Co-60 and seven were based on Cs-137. These designs provided the basis for estimating capital and operating costs which, in turn, provided the basis for determining the value of Cs-137 relative to Co-60 in these applications. We evaluated the effect of the size of the irradiation facility on the value of Cs-137. The cost of irradiation is low compared to the value of the product. Irradiation of apples for disinfestation costs $.01 to .02 per pound. Irradiation for trichina-safe pork costs $.02 per pound. Irradiation of medical supplies for sterilization costs $.07 to .12 per pound. The cost of the irradiation source, either Co-60 or Cs-137, contributed only a minor amount to the total cost of irradiation, about 5% for the fruit and hog cases and about 20% for the medical supply cases. We analyzed the sensitivity of the irradiation costs and Cs-137 value to several key assumptions.

  19. NREL: Dynamic Maps, GIS Data, and Analysis Tools - Solar Maps

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    MapSearch Searching for maps has never been easier. A screen capture of the MapSearch Map view option Solar Maps Solar maps provide monthly average daily total solar resource information on grid cells. The insolation values represent the resource available to a flat plate collector, such as a photovoltaic panel, oriented due south at an angle from horizontal to equal to the latitude of the collector location. This is typical practice for PV system installation, although other orientations are

  20. Moisture Management for High R-Value Walls

    SciTech Connect

    Lepage, R.; Schumacher, C.; Lukachko, A.

    2013-11-01

    The following report explains the moisture-related concerns for High R-value wall assemblies and discusses past Building America research work that informs this study. Hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones (2, 3, 4C, 4, 5A, and 7, respectively). The simulations are informed by experience gained from past research in this area and validated by field measurement and forensic experience. The modeling program was developed to assess the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage. The peak annual moisture content of the wood based exterior sheathing was used to comparatively analyze the response to the moisture loads for each of the walls in each given city. Walls which experienced sheathing moisture contents between 20% and 28% were identified as risky, whereas those exceeding 28% were identified as very high risk. All of the wall assemblies perform well under idealized conditions. However, only the walls with exterior insulation, or cavity insulation which provides a hygrothermal function similar to exterior insulation, perform adequately when exposed to moisture loads. Walls with only cavity insulation are particularly susceptible to air leakage condensation. None of the walls performed well when a precipitation based bulk water leak was introduced to the backside of the sheathing, emphasizing the importance of proper flashing details.

  1. WHAT THE SMART GRID MEANS TO YOU AND THE PEOPLE YOU REPRESENT. | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy THE SMART GRID MEANS TO YOU AND THE PEOPLE YOU REPRESENT. WHAT THE SMART GRID MEANS TO YOU AND THE PEOPLE YOU REPRESENT. The U.S. Department of Energy (DOE) is charged under the Energy Independence and Security Act of 2007 (EISA 2007) with modernizing the nation's electricity grid to improve its reliability and efficiency. As part of this effort, DOE is also responsible for increasing awareness of our nation's Smart Grid. Building upon The Smart Grid: An Introduction, a

  2. U.S. Energy Secretary Steven Chu, U.S. Representatives Larson and Courtney

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    to Visit Research Center in East Hartford | Department of Energy Steven Chu, U.S. Representatives Larson and Courtney to Visit Research Center in East Hartford U.S. Energy Secretary Steven Chu, U.S. Representatives Larson and Courtney to Visit Research Center in East Hartford February 3, 2011 - 12:00am Addthis WASHINGTON, DC - Tomorrow, Friday, February 4, U.S. Secretary of Energy Steven Chu will travel to East Hartford, Conn. to visit United Technologies Research Center, which has received

  3. Edlund Named DOE Facility Representative of the Year | Y-12 National

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Security Complex Edlund Named DOE Facility ... Edlund Named DOE Facility Representative of the Year Posted: May 10, 2016 - 10:24am Jeff Edlund of the National Nuclear Security Administration Production Office was recently named Facility Representative of the Year by the U.S. Department of Energy. OAK RIDGE, Tenn. -- Jeff Edlund, who conducts day-to-day federal oversight of enriched uranium facility operations at the Y-12 National Security Complex, has been named the U.S. Department of Energy

  4. Safe disposal of metal values in slag

    SciTech Connect

    Halpin, P.T.; Zarur, G.L.

    1982-10-26

    The method of safely disposing of sludge containing metal values capable of displaying toxic ecological properties includes the steps of deriving from an organic or inorganic sludge an intermediate product such as a dewatered sludge or an incinerated ash, and adding this intermediate product to a metal smelting step of a type producing a slag such that most of the metal values become encapsulated in the slag. Some precious metal values may be recovered with the metal being smelted, and may be subsequently separated therefrom by appropriate metal winning steps. The sludge product brings to the smelting process certain additives needed therein such as silica and phosphates for the slag, alumina and magnesium to lower the viscosity of the molten slag, and organic matter serving as reducing agents.

  5. Microfabricated fuel heating value monitoring device

    DOEpatents

    Robinson, Alex L.; Manginell, Ronald P.; Moorman, Matthew W.

    2010-05-04

    A microfabricated fuel heating value monitoring device comprises a microfabricated gas chromatography column in combination with a catalytic microcalorimeter. The microcalorimeter can comprise a reference thermal conductivity sensor to provide diagnostics and surety. Using microfabrication techniques, the device can be manufactured in production quantities at a low per-unit cost. The microfabricated fuel heating value monitoring device enables continuous calorimetric determination of the heating value of natural gas with a 1 minute analysis time and 1.5 minute cycle time using air as a carrier gas. This device has applications in remote natural gas mining stations, pipeline switching and metering stations, turbine generators, and other industrial user sites. For gas pipelines, the device can improve gas quality during transfer and blending, and provide accurate financial accounting. For industrial end users, the device can provide continuous feedback of physical gas properties to improve combustion efficiency during use.

  6. DOE Honors WIPP Representative for Cutting Travel Costs, Greenhouse Gas Emissions

    Energy.gov [DOE]

    WASHINGTON, D.C. – A representative of the Waste Isolation Pilot Plant (WIPP) near Carlsbad, N.M., on Tuesday received the Secretary of Energy’s Appreciation Award for her efforts to improve sustainability and reduce travel costs and the number of fleet vehicles.

  7. Mechanism-based Representative Volume Elements (RVEs) for Predicting Property Degradations in Multiphase Materials

    SciTech Connect

    Xu, Wei; Sun, Xin; Li, Dongsheng; Ryu, Seun; Khaleel, Mohammad A.

    2013-02-01

    Quantitative understanding of the evolving thermal-mechanical properties of a multi-phase material hinges upon the availability of quantitative statistically representative microstructure descriptions. Questions then arise as to whether a two-dimensional (2D) or a three-dimensional (3D) representative volume element (RVE) should be considered as the statistically representative microstructure. Although 3D models are more representative than 2D models in general, they are usually computationally expensive and difficult to be reconstructed. In this paper, we evaluate the accuracy of a 2D RVE in predicting the property degradations induced by different degradation mechanisms with the multiphase solid oxide fuel cell (SOFC) anode material as an example. Both 2D and 3D microstructure RVEs of the anodes are adopted to quantify the effects of two different degradation mechanisms: humidity-induced electrochemical degradation and phosphorus poisoning induced structural degradation. The predictions of the 2D model are then compared with the available experimental measurements and the results from the 3D model. It is found that the 2D model, limited by its inability of reproducing the realistic electrical percolation, is unable to accurately predict the degradation of thermo-electrical properties. On the other hand, for the phosphorus poisoning induced structural degradation, both 2D and 3D microstructures yield similar results, indicating that the 2D model is capable of providing computationally efficient yet accurate results for studying the structural degradation within the anodes.

  8. Determine and Communicate the Value of Replication | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Communicate the Value of Replication Determine and Communicate the Value of Replication This presentation shares how to determine and later communicate the value of ...

  9. Value Creation Through Integrated Networks and Convergence

    SciTech Connect

    De Martini, Paul; Taft, Jeffrey D.

    2015-04-01

    Customer adoption of distributed energy resources and public policies are driving changes in the uses of the distribution system. A system originally designed and built for one-way energy flows from central generating facilities to end-use customers is now experiencing injections of energy from customers anywhere on the grid and frequent reversals in the direction of energy flow. In response, regulators and utilities are re-thinking the design and operations of the grid to create more open and transactive electric networks. This evolution has the opportunity to unlock significant value for customers and utilities. Alternatively, failure to seize this potential may instead lead to an erosion of value if customers seek to defect and disconnect from the system. This paper will discuss how current grid modernization investments may be leveraged to create open networks that increase value through the interaction of intelligent devices on the grid and prosumerization of customers. Moreover, even greater value can be realized through the synergistic effects of convergence of multiple networks. This paper will highlight examples of the emerging nexus of non-electric networks with electricity.

  10. Understanding the representativeness of FLUXNET for upscaling carbon flux from eddy covariance measurements

    DOE PAGES [OSTI]

    Kumar, Jitendra; Hoffman, Forrest M.; Hargrove, William W.; Collier, Nathan

    2016-08-23

    Eddy covariance data from regional flux networks are direct in situ measurement of carbon, water, and energy fluxes and are of vital importance for understanding the spatio-temporal dynamics of the the global carbon cycle. FLUXNET links regional networks of eddy covariance sites across the globe to quantify the spatial and temporal variability of fluxes at regional to global scales and to detect emergent ecosystem properties. This study presents an assessment of the representativeness of FLUXNET based on the recently released FLUXNET2015 data set. We present a detailed high resolution analysis of the evolving representativeness of FLUXNET through time. Results providemore » quantitative insights into the extent that various biomes are sampled by the network of networks, the role of the spatial distribution of the sites on the network scale representativeness at any given time, and how that representativeness has changed through time due to changing operational status and data availability at sites in the network. To realize the full potential of FLUXNET observations for understanding emergent ecosystem properties at regional and global scales, we present an approach for upscaling eddy covariance measurements. Informed by the representativeness of observations at the flux sites in the network, the upscaled data reflects the spatio-temporal dynamics of the carbon cycle captured by the in situ measurements. In conclusion, this study presents a method for optimal use of the rich point measurements from FLUXNET to derive an understanding of upscaled carbon fluxes, which can be routinely updated as new data become available, and direct network expansion by identifying regions poorly sampled by the current network.« less

  11. Value Streams in Microgrids: A literature Review

    SciTech Connect

    Stadler, Michael; Cardoso, Gonçalo; Mashayekh, Salman; Forget, Thibault; DeForest, Nicholas; Agarwal, Ankit; Schönbein, Anna

    2015-10-01

    Microgrids are an increasingly common component of the evolving electricity grids with the potential to improve local reliability, reduce costs, and increase penetration rates for distributed renewable generation. The additional complexity of microgrids often leads to increased investment costs, creating a barrier for widespread adoption. These costs may result directly from specific needs for islanding detection, protection systems and power quality assurance that would otherwise be avoided in simpler system configurations. However, microgrids also facilitate additional value streams that may make up for their increased costs and improve the economic viability of microgrid deployment. This paper analyses the literature currently available on research relevant to value streams occurring in microgrids that may contribute to offset the increased investment costs. A review on research related to specific microgrid requirements is also presented.

  12. ARM - Value-Added Product (VAP) Reports

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (VAP) Reports Publications Journal Articles Conference Documents Program Documents & Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product (VAP) Reports For proper viewing, technical reports should be viewed with Adobe Acrobat Reader. Download the latest version from the Adobe Reader

  13. ARM - Value-Added Products - Status

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    - Status Report Expand Orange | Expand Blue | Expand Green | Collapse All See Legend for Data Availability explanation. ARM - Value-Added Products - Status Last Update: March 21 2016 19:00:50 +/- Vap Name Translator Developer Frequency Tier Producer Data Availability ACRED (ARM Cloud Retrieval Ensemble Data) Shaocheng Xie Chuanfeng Zhao, Renata Mc Coy Periodically Evaluation Developer ARM Overview: Developer Description: The ARM Cloud Retrieval Ensemble Dataset (ACRED) is a multi-year cloud

  14. Merged Sounding Value-Added Product

    SciTech Connect

    Troyan, D

    2010-03-03

    The Merged Sounding value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), surface meteorological instruments, and European Centre for Medium-Range Weather Forecasts (ECMWF) model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of 266 altitude levels.

  15. PROCESS OF SEPARATING PLUTONIUM VALUES BY ELECTRODEPOSITION

    DOEpatents

    Whal, A.C.

    1958-04-15

    A process is described of separating plutonium values from an aqueous solution by electrodeposition. The process consists of subjecting an aqueous 0.1 to 1.0 N nitric acid solution containing plutonium ions to electrolysis between inert metallic electrodes. A current density of one milliampere io one ampere per square centimeter of cathode surface and a temperature between 10 and 60 d C are maintained. Plutonium is electrodeposited on the cathode surface and recovered.

  16. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer

    Jensen, Michael

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  17. ARM KAZR-ARSCL Value Added Product

    DOE Data Explorer

    Jensen, Michael

    2012-09-28

    The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

  18. Capacity Value of Concentrating Solar Power Plants

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Capacity Value of Concentrating Solar Power Plants Seyed Hossein Madaeni and Ramteen Sioshansi Ohio State University Paul Denholm National Renewable Energy Laboratory Technical Report NREL/TP-6A20-51253 June 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract

  19. On April 25, 2013, several representatives of energy efficiency advocacy organiz

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    April 25, 2013, several representatives of energy efficiency advocacy organizations met with staff and members of the Compressed Air and Gas Institute (CAGI) along with some compressed air experts at the offices of the Alliance to Save Energy to explore and discuss a consensus approach to advancing energy efficiency of compressed air systems within the context of the DOE's potential rulemaking on compressors. The group discussed the need to assemble the relevant data and technical content that

  20. Chapter 1: Energy Challenges | Representative DOE Energy and Science Program Worshops

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy and Science Program Workshops ENERGY U.S. DEPARTMENT OF Quadrennial Technology Review 2015 1 Quadrennial Technology Review 2015 Representative DOE Energy and Science Program Workshops Chapter 1: Supplemental Information The Quadrennial Technology Review (QTR) found very extensive outreach by the DOE Energy and Science Programs to the broad energy research, development, demonstration, and deployment (RDD&D) community- including industry, academia, civil society, national laboratories,

  1. Identifying representative crop rotation patterns and grassland loss in the US Western Corn Belt

    SciTech Connect

    Sahajpal, Ritvik; Zhang, Xuesong; Izaurralde, Roberto C.; Gelfand, Ilya; Hurtt, George C.

    2014-10-01

    Crop rotations (the practice of growing crops on the same land in sequential seasons) reside at the core of agronomic management as they can influence key ecosystem services such as crop yields, carbon and nutrient cycling, soil erosion, water quality, pest and disease control. Despite the availability of the Cropland Data Layer (CDL) which provides remotely sensed data on crop type in the US on an annual basis, crop rotation patterns remain poorly mapped due to the lack of tools that allow for consistent and efficient analysis of multi-year CDLs. This study presents the Representative Crop Rotations Using Edit Distance (RECRUIT) algorithm, implemented as a Python software package, to select representative crop rotations by combining and analyzing multi-year CDLs. Using CDLs from 2010 to 2012 for 5 states in the US Midwest, we demonstrate the performance and parameter sensitivity of RECRUIT in selecting representative crop rotations that preserve crop area and capture land-use changes. Selecting only 82 representative crop rotations accounted for over 90% of the spatio-temporal variability of the more than 13,000 rotations obtained from combining the multi-year CDLs. Furthermore, the accuracy of the crop rotation product compared favorably with total state-wide planted crop area available from agricultural census data. The RECRUIT derived crop rotation product was used to detect land-use conversion from grassland to crop cultivation in a wetland dominated part of the US Midwest. Monoculture corn and monoculture soybean cropping were found to comprise the dominant land-use on the newly cultivated lands.

  2. WHAT THE SMART GRID MEANS TO YOU AND THE PEOPLE YOU REPRESENT.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    REPRESENT. regulators consumer advocates environmental groups technology providers policymakers ONE of SIX SMART GRID STAKEHOLDER BOOKS A smarter grid can work harder and more efficiently to respond to the needs of all consumers, contain costs and enable clean-energy solutions at scale. regulators utilities 2 DISCLAIMER PRINTED IN THE UNITED STATES OF AMERICA. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States

  3. 100% MOX BWR experimental program design using multi-parameter representative

    SciTech Connect

    Blaise, P.; Fougeras, P.; Cathalau, S.

    2012-07-01

    A new multiparameter representative approach for the design of Advanced full MOX BWR core physics experimental programs is developed. The approach is based on sensitivity analysis of integral parameters to nuclear data, and correlations among different integral parameters. The representativeness method is here used to extract a quantitative relationship between a particular integral response of an experimental mock-up and the same response in a reference project to be designed. The study is applied to the design of the 100% MOX BASALA ABWR experimental program in the EOLE facility. The adopted scheme proposes an original approach to the problem, going from the initial 'microscopic' pin-cells integral parameters to the whole 'macroscopic' assembly integral parameters. This approach enables to collect complementary information necessary to optimize the initial design and to meet target accuracy on the integral parameters to be measured. The study has demonstrated the necessity of new fuel pins fabrication, fulfilling minimal costs requirements, to meet acceptable representativeness on local power distribution. (authors)

  4. Uniprocessor Performance Analysis of a Representative Workload of Sandia National Laboratories' Scientific Applications.

    SciTech Connect

    Charles Laverty

    2005-10-01

    UNIPROCESSOR PERFORMANCE ANALYSIS OF A REPRESENTATIVE WORKLOAD OF SANDIA NATIONAL LABORATORIES' SCIENTIFIC APPLICATIONS Master of Science in Electrical Engineering New Mexico State University Las Cruces, New Mexico, 2005 Dr. Jeanine Cook, Chair Throughout the last decade computer performance analysis has become absolutely necessary to maximum performance of some workloads. Sandia National Laboratories (SNL) located in Albuquerque, New Mexico is no different in that to achieve maximum performance of large scientific, parallel workloads performance analysis is needed at the uni-processor level. A representative workload has been chosen as the basis of a computer performance study to determine optimal processor characteristics in order to better specify the next generation of supercomputers. Cube3, a finite element test problem developed at SNL is a representative workload of their scientific workloads. This workload has been studied at the uni-processor level to understand characteristics in the microarchitecture that will lead to the overall performance improvement at the multi-processor level. The goal of studying vthis workload at the uni-processor level is to build a performance prediction model that will be integrated into a multi-processor performance model which is currently being developed at SNL. Through the use of performance counters on the Itanium 2 microarchitecture, performance statistics are studied to determine bottlenecks in the microarchitecture and/or changes in the application code that will maximize performance. From source code analysis a performance degrading loop kernel was identified and through the use of compiler optimizations a performance gain of around 20% was achieved.

  5. ARM Climate Research Facility Quarterly Value-Added Product Report, Fourth Quarter

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    72 ARM Climate Research Facility Quarterly Value-Added Product Report C Sivaraman October 2015 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  6. DOE/SC-ARM-TR-140 Droplet Number Concentration Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    0 Droplet Number Concentration Value-Added Product L Riihimaki S McFarlane C Sivaraman June 2014 Version 1.0 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its

  7. DOE/SC-ARM/TR-087 Merged Sounding Value-Added Product D Troyan

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    87 Merged Sounding Value-Added Product D Troyan March 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  8. DOE/SC-ARM/TR-098 Micropulse Lidar Cloud Mask Value-Added Product Technical Report

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    8 Micropulse Lidar Cloud Mask Value-Added Product Technical Report C Sivaraman J Comstock July 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would

  9. DOE/SC-ARM/TR-115 Aerosol Best Estimate (AEROSOLBE) Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5 Aerosol Best Estimate (AEROSOLBE) Value-Added Product C Flynn D Turner A Koontz D Chand C Sivaraman July 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that

  10. DOE/SC-ARM/TR-129 Aerosol Optical Depth Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9 Aerosol Optical Depth Value-Added Product A Koontz C Flynn G Hodges J Michalsky J Barnard March 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use

  11. Public values related to decisions in the Tank Waste Remediation System Program

    SciTech Connect

    Armacost, L.L.; Robershotte, M.; von Winterfeldt, D.; Creighton, J.

    1994-10-01

    Managers of the Tank Waste Remediation System (TWRS) Program have to make numerous decisions, ranging from the strategic decisions on the fundamental tank cleanup goals to technical decisions on which types of equipment to use in mechanical retrieval of wastes. Furthermore, many of these decisions have to be made repeatedly (e.g., the annual allocation of research and development funds to TWRS activities). These decisions have many potential consequences in terms of risks to workers, risks to the public, environmental impacts, and economic development and cost. Because these consequences affect the values of many parties, the consequences need to be evaluated in terms that are accepted and understood by the interested parties. Therefore, an effort needs to be made to incorporate public concerns and values into the TWRS decision-making process. The purpose of this report is to review and integrate this past work on values and to create a maser list of values in order to create a consistent value framework for the numerous TWRS decisions; efficiently and effectively use public values in the decision-making process by updating this report on a regular basis to ensure that the information represents the public`s current views; provide guidance about using values in technical TWRS decisions.

  12. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. | Department of Energy Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of

  13. Sampling device for withdrawing a representative sample from single and multi-phase flows

    DOEpatents

    Apley, Walter J. (Pasco, WA); Cliff, William C. (Richland, WA); Creer, James M. (Richland, WA)

    1984-01-01

    A fluid stream sampling device has been developed for the purpose of obtaining a representative sample from a single or multi-phase fluid flow. This objective is carried out by means of a probe which may be inserted into the fluid stream. Individual samples are withdrawn from the fluid flow by sampling ports with particular spacings, and the sampling parts are coupled to various analytical systems for characterization of the physical, thermal, and chemical properties of the fluid flow as a whole and also individually.

  14. Accountable Property Representatives List and Property Pass Signer List by Organization, April 1, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Accountable Property Representatives/Property Pass Authorization 4/1/2016 Employee Authorized Organization Phone APR Primary Property Pass Signer PETEET, LISA J. ALL ORGS (202) 287-5496 √ AGEE, PATTIE M. EM-40 (202) 586-9417 √ AMES, RUSSELL SC-32 (202) 586-1082 √ √ ANDERSON, SHELLEY EI-11 (202) 586-6196 √ ANDERSON, SUE EM-73 (301) 903-8368 √ √ ATKINSON-HYMAN, DEBRA PA-1 (202) 586-2461 √ √ AUGUSTYN, ANN HG-6 (202) 287-1528 √ BARLETT, DENNIS EE-3C (202) 586-0874 √ BARNES,

  15. A general encoding framework for representing network measurement and topology data

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    CONCURRENCY AND COMPUTATION: PRACTICE AND EXPERIENCE Concurrency Computat.: Pract. Exper. 2009; 21:1069-1086 Published online 11 February 2009 in Wiley InterScience (www.interscience.wiley.com). DOI: 10.1002/cpe.1412 A general encoding framework for representing network measurement and topology data A. Brown 1, ∗, † , M. Swany 1 and J. Zurawski 2 1 Department of Computer and Information Sciences, 103 Smith Hall, Newark, DE 19716, U.S.A. 2 Internet2, 1150 18th Street NW, Suite 1020,

  16. Value-based reliability transmission planning

    SciTech Connect

    Dalton, J.G. III; Garrison, D.L.; Fallon, C.M.

    1996-08-01

    This paper presents a new value-based reliability planning (VBRP) process proposed for planning Duke Power Company`s (DPC) regional transmission system. All transmission served customers are fed from DPC`s regional transmission system which consists of a 44-kV predominantly radial system and a 100-kV predominantly non-radial system. In the past, any single contingency that could occur during system peak conditions and cause a thermal overload required the overloaded facility to be upgraded, regardless of the costs or the likelihood of the overload occurring. The new VBRP process is based on transmission system reliability evaluation and includes the following important elements: (1) a ten-year historical data base describing the probabilities of forced outages for lines and transformers; (2) a five-year average load duration curve describing the probability of an overload should a contingency occur; (3) a customer outage cost data base; (4) and probabilistic techniques. The new process attempts to balance the costs of improving service reliability with the benefits or value that these improvements bring to these customers. The objective is to provide the customers their required level of reliability while minimizing the Total Cost of their electric service.

  17. Droplet Number Concentration Value Added Product

    Energy Science and Technology Software Center

    2015-08-06

    Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration (Nd) will increase and droplet size will decrease, for a given liquid water path. This will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation; however, the magnitude and variability of these processes under different environmental conditions is still uncertain.McComiskey et al. (2009) have implemented a method, based onBoers andmore » Mitchell (1994), for calculating Nd from ground-based remote sensing measurements of optical depth and liquid water path. They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol size distribution, and the cloud updraft velocity. Estimates of Nd under a range of cloud types and conditions and at a variety of sites are needed to further quantify the impacts of aerosol cloud interactions. In order to provide data sets for studying aerosol-cloud interactions, the McComiskey et al. (2009) method was implemented as the Droplet Number Concentration (NDROP) value-added product (VAP).« less

  18. No-Impact Threshold Values for NRAP's Reduced Order Models

    SciTech Connect

    Last, George V.; Murray, Christopher J.; Brown, Christopher F.; Jordan, Preston D.; Sharma, Maneesh

    2013-02-01

    The purpose of this study was to develop methodologies for establishing baseline datasets and statistical protocols for determining statistically significant changes between background concentrations and predicted concentrations that would be used to represent a contamination plume in the Gen II models being developed by NRAP’s Groundwater Protection team. The initial effort examined selected portions of two aquifer systems; the urban shallow-unconfined aquifer system of the Edwards-Trinity Aquifer System (being used to develop the ROM for carbon-rock aquifers, and the a portion of the High Plains Aquifer (an unconsolidated and semi-consolidated sand and gravel aquifer, being used to development the ROM for sandstone aquifers). Threshold values were determined for Cd, Pb, As, pH, and TDS that could be used to identify contamination due to predicted impacts from carbon sequestration storage reservoirs, based on recommendations found in the EPA’s ''Unified Guidance for Statistical Analysis of Groundwater Monitoring Data at RCRA Facilities'' (US Environmental Protection Agency 2009). Results from this effort can be used to inform a ''no change'' scenario with respect to groundwater impacts, rather than the use of an MCL that could be significantly higher than existing concentrations in the aquifer.

  19. Temporal and Spatial Deployment of Carbon Dioxide Capture and Storage Technologies across the Representative Concentration Pathways

    SciTech Connect

    Dooley, James J.; Calvin, Katherine V.

    2011-04-18

    The Intergovernmental Panel on Climate Change’s (IPCC) Fifth Assessment (to be published in 2013-2014) will to a significant degree be built around four Representative Concentration Pathways (RCPs) that are intended to represent four scenarios of future development of greenhouse gas emissions, land use, and concentrations that span the widest range of potential future atmospheric radiative forcing. Under the very stringent climate policy implied by the 2.6 W/m2 overshoot scenario, all electricity is eventually generated from low carbon sources. However, carbon dioxide capture and storage (CCS) technologies never comprise more than 50% of total electricity generation in that very stringent scenario or in any of the other cases examined here. There are significant differences among the cases studied here in terms of how CCS technologies are used, with the most prominent being is the significant expansion of biomass+CCS as the stringency of the implied climate policy increases. Cumulative CO2 storage across the three cases that imply binding greenhouse gas constraints ranges by nearly an order of magnitude from 170GtCO2 (radiative forcing of 6.0W/m2 in 2100) to 1600GtCO2 (2.6W/m2 in 2100) over the course of this century. This potential demand for deep geologic CO2 storage is well within published estimates of total global CO2 storage capacity.

  20. An estimated 5% of new protein structures solved today represent a new Pfam family

    SciTech Connect

    Mistry, Jaina; Kloppmann, Edda; Rost, Burkhard; Punta, Marco

    2013-11-01

    This study uses the Pfam database to show that the sequence redundancy of protein structures deposited in the PDB is increasing. The possible reasons behind this trend are discussed. High-resolution structural knowledge is key to understanding how proteins function at the molecular level. The number of entries in the Protein Data Bank (PDB), the repository of all publicly available protein structures, continues to increase, with more than 8000 structures released in 2012 alone. The authors of this article have studied how structural coverage of the protein-sequence space has changed over time by monitoring the number of Pfam families that acquired their first representative structure each year from 1976 to 2012. Twenty years ago, for every 100 new PDB entries released, an estimated 20 Pfam families acquired their first structure. By 2012, this decreased to only about five families per 100 structures. The reasons behind the slower pace at which previously uncharacterized families are being structurally covered were investigated. It was found that although more than 50% of current Pfam families are still without a structural representative, this set is enriched in families that are small, functionally uncharacterized or rich in problem features such as intrinsically disordered and transmembrane regions. While these are important constraints, the reasons why it may not yet be time to give up the pursuit of a targeted but more comprehensive structural coverage of the protein-sequence space are discussed.

  1. Strain rate, temperature and representative length scale influence on plasticity and yield stress in copper

    SciTech Connect

    Dupont, Virginie; Germann, Timothy C

    2011-01-18

    Shock compression of materials constitutes a complex process involving high strain rates, elevated temperatures and compression of the lattice. Materials properties are greatly affected by temperature, the representative length scale and the strain rate of the deformation. Experimentally, it is difficult to study the dynamic microscopic mechanisms that affect materials properties following high intensity shock loading, but they can be investigated using molecular dynamics (MD) simulations. Moreover, MD allows a better control over some parameters. We are using MD simulations to study the effect of the strain rate, representative length scale and temperature on the properties of metals during compression. A half-million-atom Cu sample is subjected to strain rates ranging from 10{sup 7} s{sup -1} to 10{sup 12} s{sup -1} at different temperatures ranging from 50K to 1500K. Single crystals as well as polycrystals are investigated. Plasticity mechanisms as well as the evolution of the micro- and macro-yield stress are observed. Our results show that the yield stress increases with increasing strain rate and decreasing temperature. We also show that the strain rate at which the transition between constant and increasing yield stress as a function of the temperature occurs increases with increasing temperature. Calculations at different grain sizes will give an insight into the grain size effect on the plasticity mechanisms and the yield stress.

  2. Value Stream Mapping: Foam Collection and Processing.

    SciTech Connect

    Sorensen, Christian

    2015-07-01

    The effort to collect and process foam for the purpose of recycling performed by the Material Sustainability and Pollution Prevention (MSP2) team at Sandia National Laboratories is an incredible one, but in order to make it run more efficiently it needed some tweaking. This project started in June of 2015. We used the Value Stream Mapping process to allow us to look at the current state of the foam collection and processing operation. We then thought of all the possible ways the process could be improved. Soon after that we discussed which of the "dreams" were feasible. And finally, we assigned action items to members of the team so as to ensure that the improvements actually occur. These improvements will then, due to varying factors, continue to occur over the next couple years.

  3. SUV: Standard uptake or silly useless value?

    SciTech Connect

    Keyes, J.W. Jr.

    1995-10-01

    Quantification has always held a pervasive allure for nuclear medicine. There is a sense that anything that can be quantified should be. Once we have the numbers in hand, there is a mysterious tendency to accord them special value. Why this should be the case is unclear. Perhaps it is because of the functional nature of nuclear medicine studies, which seem as if they should be quantified. Perhaps it is because it is so easy to extract numbers from our studies. Whatever the cause, the phenomenon has been particularly strong in PET, in which we hear at every turn that PET is {open_quotes}quantitative.{close_quotes} DiChiro and Brooks commented on this phenomenon years ago, noting that, in many applications, subjective interpretation of PET images is actually superior to the use of quantitative data. Undaunted, however, the field has continued to lean heavily toward numbers as the final arbiter of correctness. 15 refs., 2 tabs.

  4. Values and the quantum conception of man

    SciTech Connect

    Stapp, H.P.

    1995-06-01

    Classical mechanics is based upon a mechanical picture of nature that is fundamentally incorrect. It has been replaced at the basic level by a radically different theory: quantum mechanics. This change entails an enormous shift in one`s basic conception of nature, one that can profoundly alter the scientific image of man himself. Self-image is the foundation of values, and the replacement of the mechanistic self-image derived from classical mechanics by one concordant with quantum mechanics may provide the foundation of a moral order better suited to today`s times, a self-image that endows human life with meaning, responsibility, and a deeper linkage to nature as a whole.

  5. An analysis of representative heating load lines for residential HSPF ratings

    SciTech Connect

    Rice, C. Keith; Shen, Bo; Shrestha, Som S.

    2015-07-01

    This report describes an analysis to investigate representative heating loads for single-family detached homes using current EnergyPlus simulations (DOE 2014a). Hourly delivered load results are used to determine binned load lines using US Department of Energy (DOE) residential prototype building models (DOE 2014b) developed by Pacific Northwest National Laboratory (PNNL). The selected residential single-family prototype buildings are based on the 2006 International Energy Conservation Code (IECC 2006) in the DOE climate regions. The resulting load lines are compared with the American National Standards Institute (ANSI)/Air-Conditioning, Heating, and Refrigeration Institute (AHRI) Standard 210/240 (AHRI 2008) minimum and maximum design heating requirement (DHR) load lines of the heating seasonal performance factor (HSPF) ratings procedure for each region. The results indicate that a heating load line closer to the maximum DHR load line, and with a lower zero load ambient temperature, is more representative of heating loads predicted for EnergyPlus prototype residential buildings than the minimum DHR load line presently used to determine HSPF ratings. An alternative heating load line equation was developed and compared to binned load lines obtained from the EnergyPlus simulation results. The effect on HSPF of the alternative heating load line was evaluated for single-speed and two-capacity heat pumps, and an average HSPF reduction of 16% was found. The alternative heating load line relationship is tied to the rated cooling capacity of the heat pump based on EnergyPlus autosizing, which is more representative of the house load characteristics than the rated heating capacity. The alternative heating load line equation was found to be independent of climate for the six DOE climate regions investigated, provided an adjustable zero load ambient temperature is used. For Region IV, the default DOE climate region used for HSPF ratings, the higher load line results in an ~28

  6. Analysis of historical delta values for IAEA/LANL NDA training courses

    SciTech Connect

    Geist, William; Santi, Peter; Swinhoe, Martyn; Bonner, Elisa

    2009-01-01

    The Los Alamos National Laboratory (LANL) supports the International Atomic Energy Agency (IAEA) by providing training for IAEA inspectors in neutron and gamma-ray Nondestructive Assay (NDA) of nuclear material. Since 1980, all new IAEA inspectors attend this two week course at LANL gaining hands-on experience in the application of NDA techniques, procedures and analysis to measure plutonium and uranium nuclear material standards with well known pedigrees. As part of the course the inspectors conduct an inventory verification exercise. This exercise provides inspectors the opportunity to test their abilities in performing verification measurements using the various NDA techniques. For an inspector, the verification of an item is nominally based on whether the measured assay value agrees with the declared value to within three times the historical delta value. The historical delta value represents the average difference between measured and declared values from previous measurements taken on similar material with the same measurement technology. If the measurement falls outside a limit of three times the historical delta value, the declaration is not verified. This paper uses measurement data from five years of IAEA courses to calculate a historical delta for five non-destructive assay methods: Gamma-ray Enrichment, Gamma-ray Plutonium Isotopics, Passive Neutron Coincidence Counting, Active Neutron Coincidence Counting and the Neutron Coincidence Collar. These historical deltas provide information as to the precision and accuracy of these measurement techniques under realistic conditions.

  7. Sandia Energy - Sandia Tool Determines Value of Solar Photovoltaic...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Tool Determines Value of Solar Photovoltaic Power Systems Home Renewable Energy Energy Partnership News News & Events Photovoltaic Solar Sandia Tool Determines Value of Solar...

  8. Energy Star Building Upgrade Value Calculator | Open Energy Informatio...

    OpenEI (Open Energy Information) [EERE & EIA]

    Upgrade Value Calculator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Star Building Upgrade Value Calculator (for Office Properties) AgencyCompany...

  9. Department of Energy Earned Value Management Survey Results ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of ...

  10. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, ...

  11. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Program Document: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  12. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added Product Report ...

  13. Methods for Analyzing the Economic Value of Concentrating Solar...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    (CSP-TES) provides multiple quantifiable benefits compared to CSP without storage or to solar photovoltaic (PV) technology, including higher energy value, ancillary services value,...

  14. Biopower Report Presents Methodology for Assessing the Value...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing...

  15. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: ARM Climate Research Facility Quarterly Value-Added Product Report Citation Details In-Document Search Title: ARM Climate Research Facility Quarterly Value-Added ...

  16. The Value of Distributed Generation and CHP Resources in Wholesale...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, September 2005 The Value of Distributed Generation and CHP Resources in Wholesale Power Markets, ...

  17. Estimating the Value of Electricity Storage Resources in Electricity...

    Office of Environmental Management (EM)

    Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The ...

  18. Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pumped Storage Hydropower (Detailed Analysis to Demonstrate Value)-Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S. Pumped Storage Hydropower ...

  19. Best Practices for Getting the Best Value from Federal Utility...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Utility Energy Service Contracts Best Practices for Getting the Best Value from Federal Utility Energy Service Contracts Best Practices for Getting the Best Value from Federal ...

  20. Carbon Value Analysis Tool (CVAT) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Value Analysis Tool (CVAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Value Analysis Tool (CVAT) AgencyCompany Organization: World Resources Institute...

  1. The value of energy storage in decarbonizing the electricity...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The value of energy storage in decarbonizing the electricity sector Title The value of energy storage in decarbonizing the electricity sector Publication Type Journal Article Year ...

  2. Value of Energy Storage for Grid Applications (Technical Report...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Citation Details In-Document Search Title: Value of Energy Storage for Grid Applications This analysis evaluates several operational ...

  3. Baseline and Target Values for PV Forecasts: Toward Improved...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting ... Baseline and Target Values for PV Forecasts: Toward Improved Solar Power Forecasting Jie ...

  4. Ecological Screening Values for Surface Water, Sediment, and...

    Office of Scientific and Technical Information (OSTI)

    Ecological Screening Values for Surface Water, Sediment, and Soil Citation Details In-Document Search Title: Ecological Screening Values for Surface Water, Sediment, and Soil ...

  5. Representing the thermal state in time-dependent density functional theory

    SciTech Connect

    Modine, N. A.; Hatcher, R. M.

    2015-05-28

    Classical molecular dynamics (MD) provides a powerful and widely used approach to determining thermodynamic properties by integrating the classical equations of motion of a system of atoms. Time-Dependent Density Functional Theory (TDDFT) provides a powerful and increasingly useful approach to integrating the quantum equations of motion for a system of electrons. TDDFT efficiently captures the unitary evolution of a many-electron state by mapping the system into a fictitious non-interacting system. In analogy to MD, one could imagine obtaining the thermodynamic properties of an electronic system from a TDDFT simulation in which the electrons are excited from their ground state by a time-dependent potential and then allowed to evolve freely in time while statistical data are captured from periodic snapshots of the system. For a variety of systems (e.g., many metals), the electrons reach an effective state of internal equilibrium due to electron-electron interactions on a time scale that is short compared to electron-phonon equilibration. During the initial time-evolution of such systems following electronic excitation, electron-phonon interactions should be negligible, and therefore, TDDFT should successfully capture the internal thermalization of the electrons. However, it is unclear how TDDFT represents the resulting thermal state. In particular, the thermal state is usually represented in quantum statistical mechanics as a mixed state, while the occupations of the TDDFT wavefunctions are fixed by the initial state in TDDFT. We work to address this puzzle by (A) reformulating quantum statistical mechanics so that thermodynamic expectations can be obtained as an unweighted average over a set of many-body pure states and (B) constructing a family of non-interacting (single determinant) TDDFT states that approximate the required many-body states for the canonical ensemble.

  6. A Subbasin-based framework to represent land surface processes in an Earth System Model

    SciTech Connect

    Tesfa, Teklu K.; Li, Hongyi; Leung, Lai-Yung R.; Huang, Maoyi; Ke, Yinghai; Sun, Yu; Liu, Ying

    2014-05-20

    Realistically representing spatial heterogeneity and lateral land surface processes within and between modeling units in earth system models is important because of their implications to surface energy and water exchange. The traditional approach of using regular grids as computational units in land surface models and earth system models may lead to inadequate representation of lateral movements of water, energy and carbon fluxes, especially when the grid resolution increases. Here a new subbasin-based framework is introduced in the Community Land Model (CLM), which is the land component of the Community Earth System Model (CESM). Local processes are represented assuming each subbasin as a grid cell on a pseudo grid matrix with no significant modifications to the existing CLM modeling structure. Lateral routing of water within and between subbasins is simulated with the subbasin version of a recently-developed physically based routing model, Model for Scale Adaptive River Routing (MOSART). As an illustration, this new framework is implemented in the topographically diverse region of the U.S. Pacific Northwest. The modeling units (subbasins) are delineated from high-resolution Digital Elevation Model while atmospheric forcing and surface parameters are remapped from the corresponding high resolution datasets. The impacts of this representation on simulating hydrologic processes are explored by comparing it with the default (grid-based) CLM representation. In addition, the effects of DEM resolution on parameterizing topography and the subsequent effects on runoff processes are investigated. Limited model evaluation and comparison showed that small difference between the averaged forcing can lead to more significant difference in the simulated runoff and streamflow because of nonlinear horizontal processes. Topographic indices derived from high resolution DEM may not improve the overall water balance, but affect the partitioning between surface and subsurface runoff

  7. Production of High Value Cellulose from Tobacco

    SciTech Connect

    Berson, R Eric; Dvaid, Keith; McGinley, W Mark; Meduri, Praveen; Clark, Ezra; Dayalan, Ethirajulu; Sumanasekera, Gamini; Sunkara, Mahendra; Colliver, Donald

    2011-06-15

    The Kentucky Rural Energy Supply Program was established in 2005 by a federal direct appropriation to benefit the citizens of the Commonwealth by creating a unified statewide consortium to promote renewable energy and energy efficiency in Kentucky. The U.S. Department of Energy's (DOE) Office of Biomass Programs initially funded the consortium in 2005 with a $2 million operational grant. The Kentucky Rural Energy Consortium (KREC) was formed at the outset of the program to advance energy efficiency and comprehensive research on biomass and bioenergy of importance to Kentucky agriculture, rural communities, and related industries. In recognition of the successful efforts of the program, KREC received an additional $1.96 million federal appropriation in 2008 for renewal of the DOE grant. From the beginning, KREC understood the value of providing a statewide forum for the discussion of Kentucky's long term energy needs and economic development potential. The new funding allowed KREC to continue to serve as a clearinghouse and support new research and development and outreach programs for energy efficiency and renewable energy.

  8. Value of Laboratory Experiments for Code Validations

    SciTech Connect

    Wawersik, W.R.

    1998-12-14

    Numerical codes have become indispensable for designing underground structures and interpretating the behavior of geologic systems. Because of the complexities of geologic systems, however, code calculations often are associated with large quantitative uncertainties. This papers presents three examples to demonstrate the value of laboratory(or bench scale) experiments to evaluate the predictive capabilities of such codes with five major conclusions: Laboratory or bench-scale experiments are a very cost-effective, controlled means of evaluating and validating numerical codes, not instead of but before or at least concurrent with the implementation of in situ studies. The design of good laboratory validation tests must identifj what aspects of a code are to be scrutinized in order to optimize the size, geometry, boundary conditions, and duration of the experiments. The design of good and sometimes difficult numerical analyses and sensitivity studies. Laboratory validation tests must involve: Good validation experiments will generate independent data sets to identify the combined effect of constitutive models, model generalizations, material parameters, and numerical algorithms. Successfid validations of numerical codes mandate a close collaboration between experimentalists and analysts drawing from the full gamut of observations, measurements, and mathematical results.

  9. What formulas are good for representing dipole and generalized oscillator-strength spectra

    SciTech Connect

    Inokuti, M.; Dillon, M.A.

    1984-01-01

    The dipole oscillator-strength distribution df/depsilon for a single continuum excitation of an atom or molecule is a function of the kinetic energy epsilon of an outgoing electron. The distribution describes many optical phenomena such as absorption, refraction, and reflection; in particular, df/depsilon is equal to the cross section for ionization by a photon with energy epsilon + I, apart from a universal constant, where I is the ionization threshold for the relevant shell. Furthermore, df/depsilon governs the ionization by glancing collisions of fast charged particles. Recent years have seen considerable accumulation of experimental data on df/depsilon. Those data are indeed valuable for many applications in radiation physics, plasma physics, atmospheric physics, and astrophysics. In most of these applications, one needs a comprehensive set of data, i.e., numerical values of df/depsilon over a wide range of epsilon, say, from several eV to many keV; most often, one needs data at all epsilon at which df/depsilon is appreciable. However, it is unrealistic to expect for measurements to cover all the epsilon values. Consequently, one must find a method for systematizing the data so that one can extrapolate or interpolate them dependably. It is from this consideration that we started a series of studies aimed at answering the question in the title. This is a summary of those studies. 28 references.

  10. Representing the thermal state in time-dependent density functional theory

    DOE PAGES [OSTI]

    Modine, N. A.; Hatcher, R. M.

    2015-05-28

    Classical molecular dynamics (MD) provides a powerful and widely used approach to determining thermodynamic properties by integrating the classical equations of motion of a system of atoms. Time-Dependent Density Functional Theory (TDDFT) provides a powerful and increasingly useful approach to integrating the quantum equations of motion for a system of electrons. TDDFT efficiently captures the unitary evolution of a many-electron state by mapping the system into a fictitious non-interacting system. In analogy to MD, one could imagine obtaining the thermodynamic properties of an electronic system from a TDDFT simulation in which the electrons are excited from their ground state bymore » a time-dependent potential and then allowed to evolve freely in time while statistical data are captured from periodic snapshots of the system. For a variety of systems (e.g., many metals), the electrons reach an effective state of internal equilibrium due to electron-electron interactions on a time scale that is short compared to electron-phonon equilibration. During the initial time-evolution of such systems following electronic excitation, electron-phonon interactions should be negligible, and therefore, TDDFT should successfully capture the internal thermalization of the electrons. However, it is unclear how TDDFT represents the resulting thermal state. In particular, the thermal state is usually represented in quantum statistical mechanics as a mixed state, while the occupations of the TDDFT wave functions are fixed by the initial state in TDDFT. Two key questions involve (1) reformulating quantum statistical mechanics so that thermodynamic expectations can be obtained as an unweighted average over a set of many-body pure states and (2) constructing a family of non-interacting (single determinant) TDDFT states that approximate the required many-body states for the canonical ensemble. In Section II, we will address these questions by first demonstrating that thermodynamic

  11. Representing the thermal state in time-dependent density functional theory

    SciTech Connect

    Modine, N. A.; Hatcher, R. M.

    2015-05-28

    Classical molecular dynamics (MD) provides a powerful and widely used approach to determining thermodynamic properties by integrating the classical equations of motion of a system of atoms. Time-Dependent Density Functional Theory (TDDFT) provides a powerful and increasingly useful approach to integrating the quantum equations of motion for a system of electrons. TDDFT efficiently captures the unitary evolution of a many-electron state by mapping the system into a fictitious non-interacting system. In analogy to MD, one could imagine obtaining the thermodynamic properties of an electronic system from a TDDFT simulation in which the electrons are excited from their ground state by a time-dependent potential and then allowed to evolve freely in time while statistical data are captured from periodic snapshots of the system. For a variety of systems (e.g., many metals), the electrons reach an effective state of internal equilibrium due to electron-electron interactions on a time scale that is short compared to electron-phonon equilibration. During the initial time-evolution of such systems following electronic excitation, electron-phonon interactions should be negligible, and therefore, TDDFT should successfully capture the internal thermalization of the electrons. However, it is unclear how TDDFT represents the resulting thermal state. In particular, the thermal state is usually represented in quantum statistical mechanics as a mixed state, while the occupations of the TDDFT wave functions are fixed by the initial state in TDDFT. Two key questions involve (1) reformulating quantum statistical mechanics so that thermodynamic expectations can be obtained as an unweighted average over a set of many-body pure states and (2) constructing a family of non-interacting (single determinant) TDDFT states that approximate the required many-body states for the canonical ensemble. In Section II, we will address these questions by first demonstrating that thermodynamic expectations

  12. Contractor Earned Value Management System Certification Status | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Earned Value Management System Certification Status Contractor Earned Value Management System Certification Status Certification Status for major EM Contracts Contractor Earned Value Management System Certification Status (129.77 KB) More Documents & Publications Department of Energy Earned Value Management Survey Results VPP Participant Status EM Major Contracts Awarded Since 2006

  13. Generalization of the Kohn-Sham system that can represent arbitrary one-electron density matrices

    DOE PAGES [OSTI]

    Hubertus J. J. van Dam

    2016-05-23

    Density functional theory is currently the most widely applied method in electronic structure theory. The Kohn-Sham method, based on a fictitious system of noninteracting particles, is the workhorse of the theory. The particular form of the Kohn-Sham wave function admits only idempotent one-electron density matrices whereas wave functions of correlated electrons in post-Hartree-Fock methods invariably have fractional occupation numbers. Here we show that by generalizing the orbital concept and introducing a suitable dot product as well as a probability density, a noninteracting system can be chosen that can represent the one-electron density matrix of any system, even one with fractionalmore » occupation numbers. This fictitious system ensures that the exact electron density is accessible within density functional theory. It can also serve as the basis for reduced density matrix functional theory. Moreover, to aid the analysis of the results the orbitals may be assigned energies from a mean-field Hamiltonian. This produces energy levels that are akin to Hartree-Fock orbital energies such that conventional analyses based on Koopmans' theorem are available. Lastly, this system is convenient in formalisms that depend on creation and annihilation operators as they are trivially applied to single-determinant wave functions.« less

  14. Clustering method and representative feeder selection for the California solar initiative

    SciTech Connect

    Broderick, Robert Joseph; Williams, Joseph R.; Munoz-Ramos, Karina

    2014-02-01

    The screening process for DG interconnection procedures needs to be improved in order to increase the PV deployment level on the distribution grid. A significant improvement in the current screening process could be achieved by finding a method to classify the feeders in a utility service territory and determine the sensitivity of particular groups of distribution feeders to the impacts of high PV deployment levels. This report describes the utility distribution feeder characteristics in California for a large dataset of 8,163 feeders and summarizes the California feeder population including the range of characteristics identified and most important to hosting capacity. The report describes the set of feeders that are identified for modeling and analysis as well as feeders identified for the control group. The report presents a method for separating a utilitys distribution feeders into unique clusters using the k-means clustering algorithm. An approach for determining the feeder variables of interest for use in a clustering algorithm is also described. The report presents an approach for choosing the feeder variables to be utilized in the clustering process and a method is identified for determining the optimal number of representative clusters.

  15. A Control Chart Approach for Representing and Mining Data Streams with Shape Based Similarity

    SciTech Connect

    Omitaomu, Olufemi A

    2014-01-01

    The mining of data streams for online condition monitoring is a challenging task in several domains including (electric) power grid system, intelligent manufacturing, and consumer science. Considering a power grid application in which thousands of sensors, called the phasor measurement units, are deployed on the power grid network to continuously collect streams of digital data for real-time situational awareness and system management. Depending on design, each sensor could stream between ten and sixty data samples per second. The myriad of sensory data captured could convey deeper insights about sequence of events in real-time and before major damages are done. However, the timely processing and analysis of these high-velocity and high-volume data streams is a challenge. Hence, a new data processing and transformation approach, based on the concept of control charts, for representing sequence of data streams from sensors is proposed. In addition, an application of the proposed approach for enhancing data mining tasks such as clustering using real-world power grid data streams is presented. The results indicate that the proposed approach is very efficient for data streams storage and manipulation.

  16. A transferable coarse-grained model for diphenylalanine: How to represent an environment driven conformational transition

    SciTech Connect

    Dalgicdir, Cahit; Sensoy, Ozge; Sayar, Mehmet; Peter, Christine

    2013-12-21

    One of the major challenges in the development of coarse grained (CG) simulation models that aim at biomolecular structure formation processes is the correct representation of an environment-driven conformational change, for example, a folding/unfolding event upon interaction with an interface or upon aggregation. In the present study, we investigate this transferability challenge for a CG model using the example of diphenylalanine. This dipeptide displays a transition from a trans-like to a cis-like conformation upon aggregation as well as upon transfer from bulk water to the cyclohexane/water interface. Here, we show that one can construct a single CG model that can reproduce both the bulk and interface conformational behavior and the segregation between hydrophobic/hydrophilic medium. While the general strategy to obtain nonbonded interactions in the present CG model is to reproduce solvation free energies of small molecules representing the CG beads in the respective solvents, the success of the model strongly depends on nontrivial decisions one has to make to capture the delicate balance between the bonded and nonbonded interactions. In particular, we found that the peptide's conformational behavior is qualitatively affected by the cyclohexane/water interaction potential, an interaction that does not directly involve the peptide at all but merely influences the properties of the hydrophobic/hydrophilic interface. Furthermore, we show that a small modification to improve the structural/conformational properties of the CG model could dramatically alter the thermodynamic properties.

  17. Sustainable development: Background an represent policy views for governmental agencies, industry, and other specialty groups

    SciTech Connect

    Dickerman, J.A.; Silverman, G.S.

    1995-12-01

    Sustainable development is a phrase that has come into common usage without benefit of clear definition or meaning. Usage very much reflects individual and group perspectives: foresters might consider sustainability in terms of maintaining ecological integrity as part of managing forests for wood harvesting, industry might emphasize pollution control, while government agencies may be looking for new ways to exploit resources on a more continuous basis. Perhaps the greatest commonality among groups considering these issues is that {open_quotes}sustainability{close_quotes} has not been attained but that it needs to occur. The National Association of Environmental Professionals (NAEP) agrees that it is critical to the health of the planet that sustainable development be actively pursued and implemented in international, national, regional, and local policies and practices. To contribute to this effort a {open_quotes}white paper{close_quotes} is being prepared. Its purpose is twofold: (1) to review the existing information from the NAEP Sustainable Development Working Group and the literature and through examination of these policies, to clarify the thinking, what is being done, and what is still needed; and (2) to develop a position and action plan. This action plan should direct NAEP`s actions in making a significant contribution to the national dialog. This paper presents the background and results of the review phase of this white paper development. Representative views on sustainable development policy and practice are presented from three perspectives: governmental agencies, industry, and other specialty groups.

  18. Introduction to the Value of Program Evaluation Case Study Series |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Introduction to the Value of Program Evaluation Case Study Series Introduction to the Value of Program Evaluation Case Study Series Case Studies Show the Value of Program Evaluation, part of the Value of Program Evaluation Case Study Series, sponsored by the U.S. Department of Energy, November 2009. Case Studies Show the Value of Program Evaluation (124.48 KB) More Documents & Publications Evaluation Helps Pesticide Program Finish Project Four Years Sooner Than

  19. SEPARATION OF PLUTONIUM VALUES FROM OTHER METAL VALUES IN AQUEOUS SOLUTIONS BY SELECTIVE COMPLEXING AND ADSORPTION

    DOEpatents

    Beaton, R.H.

    1960-06-28

    A process is given for separating tri- or tetravalent plutonium from fission products in an aqueous solution by complexing the fission products with oxalate, tannate, citrate, or tartrate anions at a pH value of at least 2.4 (preferably between 2.4 and 4), and contacting a cation exchange resin with the solution whereby the plutonium is adsorbed while the complexed fission products remain in solution.

  20. Organic Aerosol Component (OACOMP) Value-Added Product (Technical...

    Office of Scientific and Technical Information (OSTI)

    But atmospheric OA is poorly characterized and its life cycle insufficiently represented in models. As a result, current models are unable to simulate OA concentrations and ...

  1. Representing northern peatland microtopography and hydrology within the Community Land Model

    SciTech Connect

    Shi, X.; Thornton, P. E.; Ricciuto, D. M.; Hanson, P. J.; Mao, J.; Sebestyen, S. D.; Griffiths, N. A.; Bisht, G.

    2015-02-20

    Predictive understanding of northern peatland hydrology is a necessary precursor to understanding the fate of massive carbon stores in these systems under the influence of present and future climate change. Current models have begun to address microtopographic controls on peatland hydrology, but none have included a prognostic calculation of peatland water table depth for a vegetated wetland, independent of prescribed regional water tables. We introduce here a new configuration of the Community Land Model (CLM) which includes a fully prognostic water table calculation for a vegetated peatland. Our structural and process changes to CLM focus on modifications needed to represent the hydrologic cycle of bogs environment with perched water tables, as well as distinct hydrologic dynamics and vegetation communities of the raised hummock and sunken hollow microtopography characteristic of peatland bogs. The modified model was parameterized and independently evaluated against observations from an ombrotrophic raised-dome bog in northern Minnesota (S1-Bog), the site for the Spruce and Peatland Responses Under Climatic and Environmental Change experiment (SPRUCE). Simulated water table levels compared well with site-level observations. The new model predicts significant hydrologic changes in response to planned warming at the SPRUCE site. At present, standing water is commonly observed in bog hollows after large rainfall events during the growing season, but simulations suggest a sharp decrease in water table levels due to increased evapotranspiration under the most extreme warming level, nearly eliminating the occurrence of standing water in the growing season. Simulated soil energy balance was strongly influenced by reduced winter snowpack under warming simulations, with the warming influence on soil temperature partly offset by the loss of insulating snowpack in early and late winter. The new model provides improved predictive capacity for seasonal hydrological dynamics

  2. Extraction of organic compounds from representative shales and the effect on porosity

    DOE PAGES [OSTI]

    DiStefano, Victoria H.; McFarlane, Joanna; Anovitz, Lawrence M.; Stack, Andrew G.; Gordon, Alexander D.; Littrell, Ken C.; Chipera, Steve J.; Hunt, Rodney D.; Lewis, Samuel A.; Hale, Richard E.; et al

    2016-09-01

    This study is an attempt to understand how native organics are distributed with respect to pore size to determine the relationship between hydrocarbon chemistry and pore structure in shales, as the location and accessibility of hydrocarbons is key to understanding and improving the extractability of hydrocarbons in hydraulic fracturing. Selected shale cores from the Eagle Ford and Marcellus formations were subjected to pyrolysis gas chromatography (GC), thermogravimetric analysis, and organic solvent extraction with the resulting effluent analyzed by GC-mass spectrometry (MS). Organics representing the oil and gas fraction (0.1 to 1 wt. %) were observed by GC-MS. For most ofmore » the samples, the amount of native organic extracted directly related to the percentage of clay in the shale. The porosity and pore size distribution (0.95 nm to 1.35 m) in the Eagle Ford and Marcellus shales was measured before and after solvent extraction using small angle neutron scattering (SANS). An unconventional method was used to quantify the background from incoherent scattering as the Porod transformation obscures the Bragg peak from the clay minerals. Furthermore, the change in porosity from SANS is indicative of the extraction or breakdown of higher molecular weight bitumen with high C/H ratios (asphaltenes and resins). This is mostly likely attributed to complete dissolution or migration of asphaltenes and resins. These longer carbon chain lengths, C30-C40, were observed by pyrolysis GC, but either were too heavy to be analyzed in the extracts by GC-MS or were not effectively leached into the organic solvents. Thus, experimental limitations meant that the amount of extractable material could not be directly correlated to the changes in porosity measured by SANS. But, the observable porosity generally increased with solvent extraction. A decrease in porosity after extraction as observed in a shale with high clay content and low maturity was attributed to swelling of pores

  3. Representing northern peatland microtopography and hydrology within the Community Land Model

    SciTech Connect

    Shi, Xiaoying; Thornton, Peter E.; Ricciuto, Daniel M.; Hanson, Paul J.; Mao, Jiafu; Sebestyen, Stephen D.; Griffiths, Natalie A.; Bisht, Gautam

    2015-11-12

    Predictive understanding of northern peatland hydrology is a necessary precursor to understanding the fate of massive carbon stores in these systems under the influence of present and future climate change. Current models have begun to address microtopographic controls on peatland hydrology, but none have included a prognostic calculation of peatland water table depth for a vegetated wetland, independent of prescribed regional water tables. We introduce here a new configuration of the Community Land Model (CLM) which includes a fully prognostic water table calculation for a vegetated peatland. Our structural and process changes to CLM focus on modifications needed to represent the hydrologic cycle of bogs environment with perched water tables, as well as distinct hydrologic dynamics and vegetation communities of the raised hummock and sunken hollow microtopography characteristic of peatland bogs. The modified model was parameterized and independently evaluated against observations from an ombrotrophic raised-dome bog in northern Minnesota (S1-Bog), the site for the Spruce and Peatland Responses Under Climatic and Environmental Change experiment (SPRUCE). Simulated water table levels compared well with site-level observations. The new model predicts hydrologic changes in response to planned warming at the SPRUCE site. At present, standing water is commonly observed in bog hollows after large rainfall events during the growing season, but simulations suggest a sharp decrease in water table levels due to increased evapotranspiration under the most extreme warming level, nearly eliminating the occurrence of standing water in the growing season. Simulated soil energy balance was strongly influenced by reduced winter snowpack under warming simulations, with the warming influence on soil temperature partly offset by the loss of insulating snowpack in early and late winter. Furthermore, the new model provides improved predictive capacity for seasonal hydrological dynamics

  4. Assessing the credibility of the calorific value of municipal solid waste

    SciTech Connect

    Churney, K.L.; Domalski, E.S.; Ledford, A.E.; Colbert, J.C.; Bruce, S.S.; Buckley, T.J.; Paule, R.C.; Reilly, M.L.

    1984-02-01

    A study has been made at the National Bureau of Standards to establish the limits of reliability of the calorific value of municipal solid waste (MSW) determined by the bomb calorimetric procedure currently used in commercial test laboratories. This procedure involves using gram-size samples derived from MSW that has been processed down to a particle size of 2 mm or less. Critics of the procedure argue that gram-size samples are too small to be representative of such a large quantity of so heterogeneous a material, and that processing MSW may also alter its composition. To test the bomb calorimetric procedure, a 2.5 kg capacity combustion flow calorimeter was designed and constructed for the determination of the enthalpies of combustion of kilogram-size samples of MSW in flowing oxygen near atmospheric pressure. Calorimetric data on processed MSW were obtained using both the kilogram-size flow and a gram-size bomb calorimeter. Intercomparison of results shows that the calorific value (on a dry basis) of gram-size test samples agrees, within the uncertainty of our experiments, with the corresponding values for their kilogram-size parent samples provided that the sample division technique used to obtain the gram-size samples is that described in this work. The average difference of the parent minus gram-size sample values (on a dry basis) is -0.1% with an imprecision (95% confidence interval) of +-1.1% of the mean calorific value. The effects of processing on sample composition were determined by intercomparison of flow calorimetric results on kilogram-size samples of processed and minimally processed MSW (150 mm or less particle size) that are nominally identical. The average difference of the unprocessed minus processed values (on a dry basis) is -0.5% with an imprecision (95% confidence interval) of +-2.9% of the mean calorific value. 7 references, 4 figures, 10 tables.

  5. Flow dynamics and erosion rate of representative karst basin (Upper Aniene River, Central Italy)

    SciTech Connect

    Bono, P.; Percopo, C.

    1996-04-01

    Experimental data refer to a preliminary estimate of suspended solid and solute load of a perennial river. The basin is composed almost entirely of bare mesozoic, highly fractured, karstified carbonate rocks of the central Apennine range. The suspended solid load related to stormflow events in 1991 corresponds to about 14,970 t yr{sup -1}. For the same period the solute load is 60,060 t yr{sup -1} for a mean base flow discharge of 9.4 m{sup 3} s{sup -1}. Based on the mean concentration of Ca + Mg in water, the value of dissolution of carbonate rocks of 37.1 m{sup 3} km{sup -2} (equivalent approximately to 0.04 mm yr{sup -1}) was calculated. Physical and chemical variations that occur during storm events indicate the complex dynamic processes in the karst aquifier and the role undertaken by the epikarst as perched water reservoir and by the major conduits that develop through the vadose and saturated zones of the karst system. 12 refs., 10 figs., 5 tabs.

  6. METHOD OF SEPARATING TETRAVALENT PLUTONIUM VALUES FROM CERIUM SUB-GROUP RARE EARTH VALUES

    DOEpatents

    Duffield, R.B.; Stoughton, R.W.

    1959-02-01

    A method is presented for separating plutonium from the cerium sub-group of rare earths when both are present in an aqueous solution. The method consists in adding an excess of alkali metal carbonate to the solution, which causes the formation of a soluble plutonium carbonate precipitate and at the same time forms an insoluble cerium-group rare earth carbonate. The pH value must be adjusted to bctween 5.5 and 7.5, and prior to the precipitation step the plutonium must be reduced to the tetravalent state since only tetravalent plutonium will form the soluble carbonate complex.

  7. 2D Gridded Surface Data Value-Added Product

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 2D Gridded Surface Data Value-Added Product Q Tang S Xie July 2015 DISCLAIMER This ... DOESC-ARMTR-152 2D Gridded Surface Data Value-Added Product Version 1.0 Q Tang S Xie ...

  8. Simulating the Value of Concentrating Solar Power with Thermal...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Simulating the Value of Concentrating Solar Power with Thermal Energy Storage in a ... DE-AC36-08GO28308 Simulating the Value of Concentrating Solar Power with Thermal Energy ...

  9. Value of Concentrating Solar Power and Thermal Energy Storage

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL-TP-6A2-45833 February 2010 The Value of Concentrating Solar Power and Thermal Energy ... February 2010 The Value of Concentrating Solar Power and Thermal Energy Storage Ramteen ...

  10. Development of a Future Representative Concentration Pathway for Use in the IPCC 5th Assessment Earth System Model Simulations

    SciTech Connect

    None

    2010-12-29

    The representative concentration pathway to be delivered is a scenario of atmospheric concentrations of greenhouse gases and other radiatively important atmospheric species, along with land-use changes, derived from the Global Change Assessment Model (GCAM). The particular representative concentration pathway (RCP) that the Joint Global Change Research Institute (JGCRI) has been responsible for is a not-to-exceed pathway that stabilizes at a radiative forcing of 4.5Wm-2 in the year 2100.

  11. NREL Quantifies Value of CSP to the Grid (Fact Sheet)

    SciTech Connect

    Not Available

    2014-08-01

    In California study, greater penetration of renewable energy means greater value of CSP with thermal energy storage.

  12. Superior Energy Performance: Getting the Most Value from ISO 50001 |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Superior Energy Performance: Getting the Most Value from ISO 50001 Superior Energy Performance: Getting the Most Value from ISO 50001 This presentation describes ISO 50001 and explains how Superior Energy Performance can help get the most value from implementation of an Energy Management Standard. Superior Energy Performance: Getting the Most Value from ISO 50001 (March 13, 2012) (1.73 MB) More Documents & Publications Becoming a Certified Practitioner or a Certified

  13. RECOVERY AND SEPARATION OF LITHIUM VALUES FROM SALVAGE SOLUTIONS

    DOEpatents

    Hansford, D.L.; Raabe, E.W.

    1963-08-20

    Lithium values can be recovered from an aqueous basic solution by reacting the values with a phosphate salt soluble in the solution, forming an aqueous slurry of the resultant aqueous insoluble lithium phosphate, contacting the slurry with an organic cation exchange resin in the acid form until the slurry has been clarified, and thereafter recovering lithium values from the resin. (AEC)

  14. A Hydro-Economic Approach to Representing Water Resources Impacts in Integrated Assessment Models

    SciTech Connect

    Kirshen, Paul H.; Strzepek, Kenneth, M.

    2004-01-14

    Grant Number DE-FG02-98ER62665 Office of Energy Research of the U.S. Department of Energy Abstract Many Integrated Assessment Models (IAM) divide the world into a small number of highly aggregated regions. Non-OECD countries are aggregated geographically into continental and multiple-continental regions or economically by development level. Current research suggests that these large scale aggregations cannot accurately represent potential water resources-related climate change impacts. In addition, IAMs do not explicitly model the flow regulation impacts of reservoir and ground water systems, the economics of water supply, or the demand for water in economic activities. Using the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT) model of the International Food Policy Research Institute (IFPRI) as a case study, this research implemented a set of methodologies to provide accurate representation of water resource climate change impacts in Integrated Assessment Models. There were also detailed examinations of key issues related to aggregated modeling including: modeling water consumption versus water withdrawals; ground and surface water interactions; development of reservoir cost curves; modeling of surface areas of aggregated reservoirs for estimating evaporation losses; and evaluating the importance of spatial scale in river basin modeling. The major findings include: - Continental or national or even large scale river basin aggregation of water supplies and demands do not accurately capture the impacts of climate change in the water and agricultural sector in IAMs. - Fortunately, there now exist gridden approaches (0.5 X 0.5 degrees) to model streamflows in a global analysis. The gridded approach to hydrologic modeling allows flexibility in aligning basin boundaries with national boundaries. This combined with GIS tools, high speed computers, and the growing availability of socio-economic gridded data bases allows assignment of

  15. Method for selectively reducing plutonium values by a photochemical process

    DOEpatents

    Friedman, Horace A.; Toth, Louis M.; Bell, Jimmy T.

    1978-01-01

    The rate of reduction of Pu(IV) to Pu(III) in nitric acid solution containing a reducing agent is enhanced by exposing the solution to 200-500 nm electromagnetic radiation. Pu values are recovered from an organic extractant solution containing Pu(IV) values and U(VI) values by the method of contacting the extractant solution with an aqueous nitric acid solution in the presence of a reducing agent and exposing the aqueous solution to electromagnetic radiation having a wavelength of 200-500 nm. Under these conditions, Pu values preferentially distribute to the aqueous phase and U values preferentially distribute to the organic phase.

  16. Early Site Permit Demonstration Program, plant parameters envelopes: Comparison with ranges of values for four hypothetical sites. Volume 2

    SciTech Connect

    Not Available

    1992-09-01

    The purpose of this volume is to report the results of the comparison of the ALWR plan parameters envelope with values of site characteristics developed for our hypothetical sites that generally represent conditions encountered within the United States. This effort is not intended to identify or address the suitability of any existing site, site area, or region in the United States. Also included in this volume is Appendix F, SERCH Summaries Regarding Siting.

  17. Improving consumer value through enhanced performance around the world

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Improving consumer value through enhanced performance around the world Improving consumer value through enhanced performance around the world LANL statistical tools have helped create Reliability Technology (RT), which increases the overall fraction of productive manufacturing time, or "uptime," for its internal manufacturing lines. April 3, 2012 Improving consumer value through enhanced performance around the world Reliability Technology (RT) is a comprehensive reliability engineering

  18. Estimating the Value of Electricity Storage Resources in Electricity

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Markets - EAC 2011 | Department of Energy Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 Estimating the Value of Electricity Storage Resources in Electricity Markets - EAC 2011 The purpose of this report is to assist the U.S. Department of Energy (DOE) in 1) establishing a framework for understanding the role electricity storage resources (storage) can play in wholesale and retail electricity markets, 2) assessing the value of electricity storage in a

  19. CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Review | Department of Energy Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review Presenter: Susan Wachter, University of Pennsylvania View the Presentation CBEI: Broker Training - Placing Value on Energy Retrofits - 2015 Peer Review (771.97 KB) More Documents & Publications Market Engagement Overview - 2015 BTO Peer Review Commercial Buildings Integration Program Overview - 2015 BTO Peer

  20. Atmospheric Radiation Measurement (ARM) Value-Added Data Products

    Office of Scientific and Technical Information (OSTI)

    (Including Evaluated Data Sets) () | Data Explorer Value-Added Data Products (Including Evaluated Data Sets) Title: Atmospheric Radiation Measurement (ARM) Value-Added Data Products (Including Evaluated Data Sets) Many of the scientific needs of the ARM Program are met through the analysis and processing of existing data products into "value-added" products or VAPs. Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are

  1. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of January 14, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  2. Enhancing Earned Value (EV) Analysis Using Project Assessment...

    Energy Saver

    Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This ...

  3. Table 4. Average value of photovoltaic modules, 2005-2015

    Energy Information Administration (EIA) (indexed site)

    Average value of photovoltaic modules, 2005-2015" "(dollars per peak watt)" ... Administration, Form EIA-63B, 'Annual Photovoltaic CellModule Shipments Report.' Note: ...

  4. Texas: City of San Antonio Demonstrates Value of Greater Investments...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Greater Investments in Clean Energy Texas: City of San Antonio Demonstrates Value ... in efficient and renewable energy and water conservation can create jobs and stimulate ...

  5. Earned Value Management System (EVMS) - DOE Directives, Delegations...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    0A, Earned Value Management System (EVMS) by Rick Blaisdell Functional areas: Capital Assets, Contract Management, Program Management, Project Management This Guide provides...

  6. History, Applications, Numerical Values and Problems with the...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Numerical Values and Problems with the Calculation of EROI (Energy Return on Energy Investment) Professor Charles Hall State University of NY College of Environmental Science and...

  7. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    3 CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of May 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green ...

  8. Level: National and Regional Data; Row: Values of Shipments and...

    Annual Energy Outlook

    2 Consumption Ratios of Fuel, 2010; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption ...

  9. Level: National and Regional Data; Row: Values of Shipments and...

    Gasoline and Diesel Fuel Update

    2 Consumption Ratios of Fuel, 2006; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption ...

  10. ARM Climate Research Facility Quarterly Value-Added Product Report...

    Office of Scientific and Technical Information (OSTI)

    Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1-September 30, 2012 Citation Details In-Document Search Title: ARM Climate Research Facility ...

  11. Ecological Screening Values for Surface Water, Sediment, and...

    Office of Scientific and Technical Information (OSTI)

    Ecological Screening Values for Surface Water, Sediment, and Soil Friday, G. P. 54 ENVIRONMENTAL SCIENCES; SOILS; SURFACE WATERS; SEDIMENTS; ECOLOGICAL CONCENTRATION; ENVIRONMENTAL...

  12. Earned Value Management System Gold Card | Department of Energy

    Energy Saver

    Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments on a project or task. It provides ...

  13. Level: National Data; Row: Values of Shipments within NAICS Codes...

    Energy Information Administration (EIA) (indexed site)

    2006; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar ...

  14. Level: National Data; Row: Values of Shipments within NAICS Codes...

    Annual Energy Outlook

    2010; Level: National Data; Row: Values of Shipments within NAICS Codes; Column: Energy-Consumption Ratios; Unit: Varies. Consumption Consumption per Dollar Consumption per Dollar ...

  15. An Initial Value of Information (VOI) Framework for Geophysical...

    OpenEI (Open Energy Information) [EERE & EIA]

    Exploration of Geothermal Energy Abstract We present a value of information (VOI) methodology for the exploration geothermal problem. VOI quantifies how relevant any particular...

  16. Deriving value from wet and gaseous waste streams.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Deriving value from wet and gaseous waste streams. Assessing the real value of "higher value products" Setting realistic assumption and avoid common pitfalls Luca Zullo VerdeNero LLC luca.zullo@verdenero.com 651-270-6478 My technology works great and my feedstock is a no value waste! Thermodynamics and process economics are not very different Reactants Products G1 G2 $2 $1 G<0 $>0 Ea Project development and capital cost It is never too early to think about economics! Feedstock

  17. Livermore Field Office sets core values as part of continuous...

    National Nuclear Security Administration (NNSA)

    At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, ...

  18. Valuing Green in the Appraisal Process - Building America Top...

    Energy Saver

    Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in ...

  19. Module 1 - Introduction to Earned Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and defines the framework necessary for proper Earned Value management implementation. ... Module 7 - Integrated Baseline Review and Change Control Module 8 - Reporting

  20. Quantifying Fl Value of Hydro in Transmission Grid | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quantifying Fl Value of Hydro in Transmission Grid 72hydrogridserviceseprikey.ppt (3.96 MB) More Documents & Publications Enviro effects of hydrokinetic turbines on fish ...

  1. Double-{beta} decay Q value of {sup 150}Nd

    SciTech Connect

    Kolhinen, V. S.; Eronen, T.; Gorelov, D.; Hakala, J.; Jokinen, A.; Kankainen, A.; Moore, I. D.; Rissanen, J.; Saastamoinen, A.; Suhonen, J.; Aeystoe, J. [Department of Physics, P. O. Box 35 (YFL), FI-40014 University of Jyvaeskylae (Finland)

    2010-08-15

    The double-{beta} decay Q value of {sup 150}Nd was determined by using the JYFLTRAP Penning trap mass spectrometer. The measured mass difference between {sup 150}Nd and {sup 150}Sm is 3371.38(20) keV. This new value deviates by 3.7 keV from the previously adopted value of 3367.7(22) keV and is a factor of 10 more precise. Accurate knowledge of this Q value is important because {sup 150}Nd is a primary candidate to be used in the search for neutrinoless double-{beta} decay modes in several experiments.

  2. Two small businesses selected for work valued at $80 million

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Businesses compete for drilling, monitoring work Two small businesses selected for work valued at 80 million Two small businesses compete for up to 80 million in well drilling ...

  3. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of April 11, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green ...

  4. The Purpose and Value of Successful Technology Demonstrations...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical...

  5. Microsoft Word - Web Posting for Earned Value Management

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of December 2, 2015) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  6. Shared Value in Utility and Efficiency Partnerships | Department...

    Energy.gov [DOE] (indexed site)

    Energy Efficiency Solutions Conference: Shared Value in Utility and Efficiency Partnerships, July 10, 2012. Presents four case studies highlighting partnerships between local...

  7. Bioenergy Demonstration Project: Value-Added Products from Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Bioenergy Demonstration Project: Value-Added Products from Renewable Fuels May 23, 2013 Technology Area Review: Biochemical Conversion Paul Blum University of Nebraska 2 Goal ...

  8. Superior Energy Performance: Getting the Most Value from ISO...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Superior Energy Performance cm : Getting the Most Value from ISO 50001- Energy Management Systems US Department of Energy Advanced Manufacturing Office March 13, 2012 Aimee McKane ...

  9. Enhancing Earned Value (EV) Analysis Using Project Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This ...

  10. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect

    Sivaraman, Chitra

    2014-11-21

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility.

  11. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    3 CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of June 10, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified ...

  12. I/O values for determination of the origin of some indoor organic pollutants

    SciTech Connect

    Otson, R.; Zhu, J.

    1997-12-31

    To reduce human health risks resulting from exposure to toxic chemicals, it is important to determine the origin of such substances. The ratio (I/O) of indoor to outdoor concentrations of selected airborne vapor phase organic compounds (VPOC) was used to estimate the contribution of indoor sources to levels of the compounds in the air of 44 homes selected randomly in the Greater Toronto Area (GTA). Average I/O values for all of the homes were greater 1.5 for 10 of the 20 detected target compounds, and it could be concluded that indoor VPOC sources had a greater impact on indoor air quality than outdoor air in these instances. A significant finding, which aptly demonstrates the importance of indoor sources and pollution, was the overall I/O value of 5.2 for the 44 representative GTA homes. Possible indoor sources for most of the 10 compounds could be identified, based on information collected by means of a questionnaire, as well as from the scientific literature. However, possible sources for some compounds could not be determined as readily, probably because of the presence of multiple sources, and sources which had not been previously noted, such as foods and beverages. The sensitivity of I/O values to various factors (e.g., source strength, air exchange rates, precision of measurements, unanticipated sources), and the reliability of determining the origin of pollutants by use of I/O values alone were examined, with some examples. If used judiciously, the I/O value can be a useful tool for IAQ investigations.

  13. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

    SciTech Connect

    Schneider, K.J.

    1982-09-01

    The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

  14. DOE: Quantifying the Value of Hydropower in the Electric Grid

    SciTech Connect

    2012-12-31

    The report summarizes research to Quantify the Value of Hydropower in the Electric Grid. This 3-year DOE study focused on defining value of hydropower assets in a changing electric grid. Methods are described for valuation and planning of pumped storage and conventional hydropower. The project team conducted plant case studies, electric system modeling, market analysis, cost data gathering, and evaluations of operating strategies and constraints. Five other reports detailing these research results are available a project website, www.epri.com/hydrogrid. With increasing deployment of wind and solar renewable generation, many owners, operators, and developers of hydropower have recognized the opportunity to provide more flexibility and ancillary services to the electric grid. To quantify value of services, this study focused on the Western Electric Coordinating Council region. A security-constrained, unit commitment and economic dispatch model was used to quantify the role of hydropower for several future energy scenarios up to 2020. This hourly production simulation considered transmission requirements to deliver energy, including future expansion plans. Both energy and ancillary service values were considered. Addressing specifically the quantification of pumped storage value, no single value stream dominated predicted plant contributions in various energy futures. Modeling confirmed that service value depends greatly on location and on competition with other available grid support resources. In this summary, ten different value streams related to hydropower are described. These fell into three categories; operational improvements, new technologies, and electricity market opportunities. Of these ten, the study was able to quantify a monetary value in six by applying both present day and future scenarios for operating the electric grid. This study confirmed that hydropower resources across the United States contribute significantly to operation of the grid in terms

  15. Value of Concentrating Solar Power and Thermal Energy Storage

    SciTech Connect

    Sioshansi, R.; Denholm, P.

    2010-02-01

    This paper examines the value of concentrating solar power (CSP) and thermal energy storage (TES) in four regions in the southwestern United States. Our analysis shows that TES can increase the value of CSP by allowing more thermal energy from a CSP plant?s solar field to be used, by allowing a CSP plant to accommodate a larger solar field, and by allowing CSP generation to be shifted to hours with higher energy prices. We analyze the sensitivity of CSP value to a number of factors, including the optimization period, price and solar forecasting, ancillary service sales, capacity value and dry cooling of the CSP plant. We also discuss the value of CSP plants and TES net of capital costs.

  16. Construction Control Representative

    Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Engineering and Construction Field Engineering, (J5600) 5555...

  17. Measuring industrial energy efficiency: Physical volume versus economic value

    SciTech Connect

    Freeman, S.L.; Niefer, M.J.; Roop, J.M.

    1996-12-01

    This report examines several different measures of industrial output for use in constructing estimates of industrial energy efficiency and discusses some reasons for differences between the measures. Estimates of volume-based measures of output, as well as 3 value-based measures of output (value of production, value of shipments, and value added), are evaluated for 15 separate 4-digit industries. Volatility, simple growth rate, and trend growth rate estimates are made for each industry and each measure of output. Correlations are made between the volume- and value-based measures of output. Historical energy use data are collected for 5 of the industries for making energy- intensity estimates. Growth rates in energy use, energy intensity, and correlations between volume- and value-based measures of energy intensity are computed. There is large variability in growth trend estimates both long term and from year to year. While there is a high correlation between volume- and value-based measures of output for a few industries, typically the correlation is low, and this is exacerbated for estimates of energy intensity. Analysis revealed reasons for these low correlations. It appears that substantial work must be done before reliable measures of trends in the energy efficiency of industry can be accurately characterized.

  18. The social values at risk from sea-level rise

    SciTech Connect

    Graham, Sonia; Barnett, Jon; Fincher, Ruth; Hurlimann, Anna; Mortreux, Colette; Waters, Elissa

    2013-07-15

    Analysis of the risks of sea-level rise favours conventionally measured metrics such as the area of land that may be subsumed, the numbers of properties at risk, and the capital values of assets at risk. Despite this, it is clear that there exist many less material but no less important values at risk from sea-level rise. This paper re-theorises these multifarious social values at risk from sea-level rise, by explaining their diverse nature, and grounding them in the everyday practices of people living in coastal places. It is informed by a review and analysis of research on social values from within the fields of social impact assessment, human geography, psychology, decision analysis, and climate change adaptation. From this we propose that it is the lived values of coastal places that are most at risk from sea-level rise. We then offer a framework that groups these lived values into five types: those that are physiological in nature, and those that relate to issues of security, belonging, esteem, and self-actualisation. This framework of lived values at risk from sea-level rise can guide empirical research investigating the social impacts of sea-level rise, as well as the impacts of actions to adapt to sea-level rise. It also offers a basis for identifying the distribution of related social outcomes across populations exposed to sea-level rise or sea-level rise policies.

  19. Erosion control for the Fundamental values in NEPA

    SciTech Connect

    McMillen, M.C.; Hinds, W.T.

    1997-08-01

    A commitment to exploring alternatives to major Federal actions, pursuing and facilitating public involvement, and identifying measures to mitigate the adverse effects of actions selected for implementation are important values of the National Environmental Policy Act (NEPA) process. While other major environmental legislation may commit an agency to different aspects of environmental review and protection, no other Federal statute combines the unique values that NEPA does. Since its enactment over 26 years ago, NEPA has faced numerous challenges to its fundamental intent and values. Recently, processes deemed to be, or assumed to be, functionally equivalent have attempted to subsume important NEPA values while allowing major Federal actions to proceed without NEPA`s environmental review. This paper examines the concept and origin of the term NEPA values, and the effects of judicial review and actions such as DOE`s NEPA/CERCLA integration agreement, have had on maintaining fundamental NEPA values in the Federal decision making process. In addition, based on concerns that are building momentum in the US Congress, a brief discussion will be included exploring what may occur in the future to prevent further erosion of fundamental NEPA values.

  20. ESTIMATED NEPTUNIUM SEDIMENT SORPTION VALUES AS A FUNCTION OF PH AND MEASURED BARIUM AND RADIUM KD VALUES

    SciTech Connect

    Kaplan, D.

    2011-01-13

    The objective of this document is to provide traceability and justification for a select few new geochemical data used in the Special Analysis entitled 'Special Analysis for the Dose Assessment of the Final Inventories in Center Slit Trenches One through Five'. Most values used in the Special Analysis came from the traditional geochemical data package, however, some recent laboratory measurements have made it possible to estimate barium K{sub d} values. Additionally, some recent calculations were made to estimate neptunium K{sub d} values as a function of pH. The assumptions, justifications, and calculations needed to generate these new values are presented in this document, and the values are summarized.

  1. NREL: State and Local Governments - Value-of-Solar Tariffs

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Value-of-Solar Tariffs A value-of-solar (VOS) tariff is a rate design policy that gives customers with solar installations credit for the electricity generated by a photovoltaic (PV) system. Utility customers with distributed PV panels on their homes or businesses can give power to and take power from the grid. A VOS tariff clarifies how much energy is sold in each direction (customer to utility and utility to customer) and at what rate the energy is valued. A VOS tariff should not be confused

  2. The value of post-extracted algae residue

    DOE PAGES [OSTI]

    Bryant, Henry; Gogichaishvili, Ilia; Anderson, David; Richardson, James; Sawyer, Jason; Wickersham, Tryon; Drewery, Merritt

    2012-07-26

    This paper develops a hedonic pricing model for post-extracted algae residue (PEAR), which can be used for assessing the economic feasibility of an algal production enterprise. Prices and nutritional characteristics of commonly employed livestock feed ingredients are used to estimate the value of PEAR based on its composition. We find that PEAR would have a value lower than that of soybean meal in recent years. The value of PEAR will vary substantially based on its characteristics. PEAR could have generated algal fuel co-product credits that in recent years would have ranged between $0.95 and $2.43 per gallon of fuel produced.

  3. Case Studies Show the Value of Program Evaluation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    
 1
 Case Studies Show the Value of Program Evaluation Value of Program Evaluation Case Study Series Sponsored by the U.S. Department of Energy, November 2009 The U.S Department of Energy sponsored several small case studies that clearly demonstrate the benefits that evaluation can provide to energy and environmental programs. The result is a set of five "Value of Program Evaluation" Case Studies (each 2-pages in length) documenting the benefits of implementing recommendations from

  4. The Value of Energy Storage for Grid Applications

    Energy.gov [DOE]

    Electricity storage can provide multiple benefits to the grid, including the ability to levelize load, provide ancillary services, and provide firm capacity. Historically, it has been difficult to compare the value of electricity storage to alternative generation resources using simplified metrics, such as levelized cost of energy. To properly value energy storage requires detailed time-series simulations using software tools that can co-optimize multiple services provided by different storage technologies. This analysis uses a commercial grid simulation tool to examine the potential value of different general classes of storage devices when providing both energy and ancillary services.

  5. Value of a Smart Grid System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Value of a Smart Grid System Value of a Smart Grid System Implementing a Smart Grid is the effort to move the electric grid from a "static" to a "dynamic" state. Doing so improves the efficiency, reliability and cost-effectiveness of the electrical system's operations, planning and maintenance and creates a system that is interactive with consumers and markets, allowing better energy and dollar savings. Below we summarize the value of the Smart Grid from six perspectives.

  6. THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 More Documents & Publications Economic Dispatch of Electric ...

  7. Object detection with a multistatic array using singular value decomposition

    DOEpatents

    Hallquist, Aaron T.; Chambers, David H.

    2014-07-01

    A method and system for detecting the presence of subsurface objects within a medium is provided. In some embodiments, the detection system operates in a multistatic mode to collect radar return signals generated by an array of transceiver antenna pairs that is positioned across a surface and that travels down the surface. The detection system converts the return signals from a time domain to a frequency domain, resulting in frequency return signals. The detection system then performs a singular value decomposition for each frequency to identify singular values for each frequency. The detection system then detects the presence of a subsurface object based on a comparison of the identified singular values to expected singular values when no subsurface object is present.

  8. Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson...

    Office of Scientific and Technical Information (OSTI)

    Value of Energy Storage for Grid Applications Denholm, P.; Jorgenson, J.; Hummon, M.; Jenkin, T.; Palchak, D.; Kirby, B.; Ma, O.; O'Malley, M. 24 POWER TRANSMISSION AND...

  9. Earned Value (EV) Analysis and Project Assessment & Reporting...

    Office of Environmental Management (EM)

    staff to the Secretary of Energy will have easy access to the same data. EarnedValue-EV-AnalysisProjectAssessmentReportingSystem-PARS IIPresentationJanuary2013.pdf More...

  10. ARM Evaluation Product : Droplet Number Concentration Value-Added...

    Office of Scientific and Technical Information (OSTI)

    They show that the magnitude of the aerosol-cloud interactions (ACI) varies with a range of factors, including the relative value of the cloud liquid water path (LWP), the aerosol ...

  11. How to Estimate the Value of Service Reliability Improvements

    SciTech Connect

    Sullivan, Michael J.; Mercurio, Matthew G.; Schellenberg, Josh A.; Eto, Joseph H.

    2010-06-08

    A robust methodology for estimating the value of service reliability improvements is presented. Although econometric models for estimating value of service (interruption costs) have been established and widely accepted, analysts often resort to applying relatively crude interruption cost estimation techniques in assessing the economic impacts of transmission and distribution investments. This paper first shows how the use of these techniques can substantially impact the estimated value of service improvements. A simple yet robust methodology that does not rely heavily on simplifying assumptions is presented. When a smart grid investment is proposed, reliability improvement is one of the most frequently cited benefits. Using the best methodology for estimating the value of this benefit is imperative. By providing directions on how to implement this methodology, this paper sends a practical, usable message to the industry.

  12. Value of Improved Short-Term Wind Power Forecasting

    SciTech Connect

    Hodge, B. M.; Florita, A.; Sharp, J.; Margulis, M.; Mcreavy, D.

    2015-02-01

    This report summarizes an assessment of improved short-term wind power forecasting in the California Independent System Operator (CAISO) market and provides a quantification of its potential value.

  13. G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value...

    Office of Scientific and Technical Information (OSTI)

    G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product Citation Details In-Document Search Title: G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) ...

  14. Department of Energy Earned Value Management Survey Results

    Energy.gov [DOE]

    Humphreys & Associates, Inc. (H&A) conducted a survey of Department of Energy (DOE) Earned Value Management (EVM) and Project Management (PM) stakeholders.  Two versions of the survey were...

  15. Sales and Value Recognition for Zero Energy Ready Home Webinar...

    Energy Saver

    ... Now, anyone can go into this database here and plug in an ... The PV Value Tool offers a free Web-based tool that I'm ... So we all play a part in that. As Laura has already talked ...

  16. Gyrotron cavity resonator with an improved value of Q

    DOEpatents

    Stone, David S.; Shively, James F.

    1982-10-26

    A gyrotron cavity resonator is connected smoothly and directly to an output waveguide with a very gradually tapered wall so that values of external Q lower than twice the diffraction limit are obtainable.

  17. ZERH Webinar: Sales and Value Recognition of Zero Energy Ready...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ZERH Webinar: Sales and Value Recognition of Zero Energy Ready Homes December 18, 2014 12:00PM to 1:15PM EST GoToWebinar The U.S. Department of Energy Zero Energy Ready Home (ZERH) ...

  18. Biopower Report Presents Methodology for Assessing the Value...

    Energy Saver

    Biomass in Pulverized Coal Plants Biopower Report Presents Methodology for Assessing the Value of Co-Firing Biomass in Pulverized Coal Plants November 20, 2014 - 12:22pm ...

  19. Variance control in weak-value measurement pointers

    SciTech Connect

    Parks, A. D.; Gray, J. E.

    2011-07-15

    The variance of an arbitrary pointer observable is considered for the general case that a complex weak value is measured using a complex valued pointer state. For the typical cases where the pointer observable is either its position or momentum, the associated expressions for the pointer's variance after the measurement contain a term proportional to the product of the weak value's imaginary part with the rate of change of the third central moment of position relative to the initial pointer state just prior to the time of the measurement interaction when position is the observable--or with the initial pointer state's third central moment of momentum when momentum is the observable. These terms provide a means for controlling pointer position and momentum variance and identify control conditions which, when satisfied, can yield variances that are smaller after the measurement than they were before the measurement. Measurement sensitivities which are useful for estimating weak-value measurement accuracies are also briefly discussed.

  20. ,"U.S. Natural Gas Wellhead Value and Marketed Production"

    Energy Information Administration (EIA) (indexed site)

    Value and Marketed Production" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","U.S. Natural...

  1. Template:LabelValuePair | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    is typically used to display the results of an ask or sparql query in a simple label: value format. It is used by many pages, including the sub pages for country profiles, and is...

  2. Panel on Resource Efficiency and Supply Chain/Value Chain

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Panel on Resource Efficiency and Supply Chain/Value Chain: Session 1- Water / Energy / Materials Nexus Session 2 - Advanced Manufacturing through the Supply Chain / Value Chain AMO Peer Review Meeting June 14, 2016 Joe Cresko, DOE-AMO William Morrow, LBNL Samantha Reese, NREL Diane Graziano, ANL Sachin Nimbalkar, ORNL Water - Energy -Materials Nexus Water - Energy - Materials Nexus: Research Questions What are the foundational, interdependent effects of energy, water, and materials consumption

  3. Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    System (PARS II) - Road Show Presentation | Department of Energy Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation Enhancing Earned Value (EV) Analysis Using Project Assessment & Reporting System (PARS II) - Road Show Presentation This presentation was provided by the DOE Office of Project Management Oversight and Assessments (formerly DOE Office of Acquisition and Project Management) in January 2013. It is about the

  4. Toward a New Paradigm for Valuing Demand Response

    SciTech Connect

    Earle, Robert; Faruqui, Ahmad

    2006-05-15

    There is value in DR, but it needs to be evaluated correctly. The pricing experiment in California showed that well-designed dynamic pricing programs can have a significant impact on critical peak loads, and California's investor-owned utilities are using the experimental results to develop business cases for advanced metering. A key question in developing these business cases is how much value to attach to a kW of load that is curtailed during critical times. (author)

  5. ARM Evaluation Product : Droplet Number Concentration Value-Added Product

    Office of Scientific and Technical Information (OSTI)

    (Dataset) | Data Explorer Evaluation Product : Droplet Number Concentration Value-Added Product Title: ARM Evaluation Product : Droplet Number Concentration Value-Added Product Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo

  6. Interpolated Sounding and Gridded Sounding Value-Added Products (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Interpolated Sounding and Gridded Sounding Value-Added Products Citation Details In-Document Search Title: Interpolated Sounding and Gridded Sounding Value-Added Products Standard Atmospheric Radiation Measurement (ARM) Climate Research Facility sounding files provide atmospheric state data in one dimension of increasing time and height per sonde launch. Many applications require a quick estimate of the atmospheric state at higher time resolution. The

  7. Unlocking Customer Value: The Virtual Power Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Unlocking Customer Value: The Virtual Power Plant Unlocking Customer Value: The Virtual Power Plant The utility world has changed drastically in the last 10 years. New technologies like Smart Meters and fully functional Smart Grid concepts have made large inroads into the utility space and no one should want to be left behind. Utilities also face additional pressures from regulatory bodies who are continuing to encourage carbon reduction and greater customer flexibility. Utilities need to

  8. CALCULATION OF STOPPING POWER VALUES AND RANGES OF FAST IONS.

    Energy Science and Technology Software Center

    2003-03-18

    STOPOW calculates a set of stopping power values and ranges of fast ions in matter for any materials. Furthermore STOPOW can calculate a set of values for one special auxiliary function (e.g. kinematic factors, track structure parameters, time of flight or correction factors in the stopping function) . The user chooses the physical units for stopping powers and ranges and the energy range for calculations.

  9. Valuing Green in the Appraisal Process - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Valuing Green in the Appraisal Process - Building America Top Innovation Valuing Green in the Appraisal Process - Building America Top Innovation Real estate appraisers have historically faced challenges with green and energy efficient homes, both in identifying comparables and in supporting adjustments for improvements. These difficulties stem BARA Green Addendum Top Innov 2014-2.jpg from many reasons, including data gaps in commonly used information systems and lender

  10. Mobil-Marathon and similar oil company mergers. Hearing before the Subcommittee on Fossil and Synthetic Fuels of the Committee on Energy and Commerce, House of Representatives, Ninety-Seventh Congress, First Session on H. R. 4930

    SciTech Connect

    Not Available

    1982-01-01

    Subcommittee chairman Phillip R. Sharp's opening statement notes that a wave of large horizontal and vertical mergers are the result of rising oil prices and oil-reserve values, price decontrol, and a relaxation of anti-merger enforcement by the Reagan administration. US merger activity in 1981 had a $20 billion value, half of which involved oil, gas, mining, and mineral companies. Chairman Sharp further notes that the mergers will raise customer costs and eliminate many small companies, which indirectly retards new exploration. H.R. 4930 requires a study of these effects and provides for a moratorium on larger mergers until the study is completed. The testimony of eight witnesses representing oil companies and related groups follows the text of H.R. 4930. Additional material submitted for the record includes a resolution by the Illinois Petroleum Marketers Association expressing their concern about the impact of mergers. (DCK)

  11. Prototype indicators of value added through public involvement

    SciTech Connect

    Lach, D.; Hixson, P.; Ramonas, L.

    1995-12-01

    As more managers realize that public input in public sector decision making is a given in the current political and social climate, many are turning to public involvement as a way to manage input so that it is beneficial to their decisions and projects. Public involvement is starting to become a familiar way of doing business for many Federal agencies and its contractors. Yet, many, if not most agency and contractor managers are still unclear about the value and costs that public involvement adds to their projects. Proponents claim that public involvement increases the acceptability of project goals by increasing stakeholders` knowledge about and involvement in decisions of importance to them. In spite of these assertions avowing the benefits of public involvement, proponents have not generated methods that demonstrate or provide evidence of such value added through incorporating public involvement into projects. As these questions about the value and costs of public involvement efforts increase, there is a pressing need to document the value and costs of public involvement for the participants in these processes--the stakeholders--and to present this information to decision makers in ways that help them assess the value and costs of managing public input through a public involvement program.

  12. Correcting incompatible DN values and geometric errors in nighttime lights time series images

    SciTech Connect

    Zhao, Naizhuo; Zhou, Yuyu; Samson, Eric

    2015-04-01

    The Defense Meteorological Satellite Programs Operational Linescan System (DMSP-OLS) nighttime lights imagery has proven to be a powerful remote sensing tool to monitor urbanization and assess socioeconomic activities at large scales. However, the existence of incompatible digital number (DN) values and geometric errors severely limit application of nighttime light image data on multi-year quantitative research. In this study we extend and improve previous studies on inter-calibrating nighttime lights image data to obtain more compatible and reliable nighttime lights time series (NLT) image data for China and the United States (US) through four steps: inter-calibration, geometric correction, steady increase adjustment, and population data correction. We then use gross domestic product (GDP) data to test the processed NLT image data indirectly and find that sum light (summed DN value of pixels in a nighttime light image) maintains apparent increase trends with relatively large GDP growth rates but does not increase or decrease with relatively small GDP growth rates. As nighttime light is a sensitive indicator for economic activity, the temporally consistent trends between sum light and GDP growth rate imply that brightness of nighttime lights on the ground is correctly represented by the processed NLT image data. Finally, through analyzing the corrected NLT image data from 1992 to 2008, we find that China experienced apparent nighttime lights development in 1992-1997 and 2001-2008 respectively and the US suffered from nighttime lights decay in large areas after 2001.

  13. RECOVERY OF THORIUM AND URANIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Calkins, G.D.

    1958-02-18

    This patent deals with the separation and recovery of uranium from monazite sand. After initial treatment of the sand with sodium hydroxide, a precipitate is obtuined which contains the uranium, thorium, rare earths and some phosphorus. This precipitate is then dissolved in nitric acid. The bulk of the rare earths are removed from thls soiution by adding aa excess of alkali carbonate, causing precipitation of the rare earths together with part of the thorium present. The solution still contains a considerable amount of thorium, some rare earths, and practically all of the uranium originally present. Thorium and rare earth values are readily precipitated from such solution, and the uranium values thus isolated, by the addition of an excess hydrogen peroxide. The pH value of the solution is preferably adjusted to at least 9 prior to the addition of the peroxide.

  14. Extended space expectation values in quantum dynamical system evolutions

    SciTech Connect

    Demiralp, Metin

    2014-10-06

    The time variant power series expansion for the expectation value of a given quantum dynamical operator is well-known and well-investigated issue in quantum dynamics. However, depending on the operator and Hamiltonian singularities this expansion either may not exist or may not converge for all time instances except the beginning of the evolution. This work focuses on this issue and seeks certain cures for the negativities. We work in the extended space obtained by adding all images of the initial wave function under the system Hamiltonians positive integer powers. This requires the introduction of certain appropriately defined weight operators. The resulting better convergence in the temporal power series urges us to call the new defined entities extended space expectation values even though they are constructed over certain weight operators and are somehow pseudo expectation values.

  15. Evaluation of the Use of Existing RELAP5-3D Models to Represent the Actinide Burner Test Reactor

    SciTech Connect

    C. B. Davis

    2007-02-01

    The RELAP5-3D code is being considered as a thermal-hydraulic system code to support the development of the sodium-cooled Actinide Burner Test Reactor as part of Global Nuclear Energy Partnership. An evaluation was performed to determine whether the control system could be used to simulate the effects of non-convective mechanisms of heat transport in the fluid that are not currently represented with internal code models, including axial and radial heat conduction in the fluid and subchannel mixing. The evaluation also determined the relative importance of axial and radial heat conduction and fluid mixing on peak cladding temperature for a wide range of steady conditions and during a representative loss-of-flow transient. The evaluation was performed using a RELAP5-3D model of a subassembly in the Experimental Breeder Reactor-II, which was used as a surrogate for the Actinide Burner Test Reactor. An evaluation was also performed to determine if the existing centrifugal pump model could be used to simulate the performance of electromagnetic pumps.

  16. Probabilistic cost-benefit analysis of enhanced safety features for strategic nuclear weapons at a representative location

    SciTech Connect

    Stephens, D.R.; Hall, C.H.; Holman, G.S.; Graham, K.F.; Harvey, T.F.; Serduke, F.J.D.

    1993-10-01

    We carried out a demonstration analysis of the value of developing and implementing enhanced safety features for nuclear weapons in the US stockpile. We modified an approach that the Nuclear Regulatory Commission (NRC) developed in response to a congressional directive that NRC assess the ``value-impact`` of regulatory actions for commercial nuclear power plants. Because improving weapon safety shares some basic objectives with NRC regulations, i.e., protecting public health and safety from the effects of accidents involving radioactive materials, we believe the NRC approach to be appropriate for evaluating weapons-safety cost-benefit issues. Impact analysis includes not only direct costs associated with retrofitting the weapon system, but also the expected costs (or economic risks) that are avoided by the action, i.e., the benefits.

  17. SOLVENT EXTRACTION OF THORIUM VALUES FROM AQUEOUS SOLUTIONS

    DOEpatents

    Warf, J.C.

    1959-04-21

    The separation of thorium values from rare earth metals contained ln aqueous solutions by means of extraction with a water immiscible alkyl phosphate diluted with a hydrocarbon such as hexane is described. While the extraction according to this invention may be carried out from any aqueous salt solution, it is preferred to use solutions containing free mineral acid. Hydrochloric acid and in particular nitric acid are sultable in a concentration ranging from 0.1 to 7 normal. The higher acid concentration results in higher extraction values.

  18. Maryland Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Maryland Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 31 60 39 20 44 29 34 1990's 22 29 33 28 26 22 0 118 63 18 2000's 34 32 22 48 34 46 NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual

  19. Missouri Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Missouri Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4 4 4 4 4 4 1990's 7 19 27 14 8 16 25 5 0 2000's 0 0 0 0 0 0 2010's 0 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid disclosure of individual company data. Release Date:

  20. Arizona Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arizona Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 26 10 0 0 0 0 1,360 1990's 2,125 1,225 730 548 691 500 405 401 411 439 2000's 332 266 243 426 306 211 588 634 503 695 2010's 165 - = No Data Reported; -- = Not Applicable; NA = Not Available; W = Withheld to avoid

  1. Analytic Challenges to Valuing Energy Storage Workshop Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) has coordinated energy storage efforts from a research and development (R&D) perspective – identifying technology needs, metrics, and goals – but DOE and the research and analytic community have struggled with valuing storage at a systems level. Sixteen stakeholders and experts from across the electric power industry, research universities, national laboratories, and federal agencies were invited to join 8 DOE staff members in a workshop on September 19-20, 2011, in Washington, D.C. to discuss the current state of knowledge for grid-scale energy storage and, in particular, the methodologies to assess its value on the grid.

  2. Visualizing Value: Game-Changing Solar Technologies for Homeowners |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Visualizing Value: Game-Changing Solar Technologies for Homeowners Visualizing Value: Game-Changing Solar Technologies for Homeowners July 29, 2016 - 10:00am Addthis Sistine Solar’s completed SolarSkin installation on a Katahdin log cabin. The company’s SolarSkin panels seamlessly blend in with the cabin’s green roof. | Photo Courtesy of Sistine Solar Sistine Solar's completed SolarSkin installation on a Katahdin log cabin. The company's SolarSkin panels

  3. Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product

    SciTech Connect

    Newsom, RK; Sivaraman, C; McFarlane, SA

    2012-10-31

    The purpose of this document is to describe the Raman Lidar Profiles–Temperature (RLPROFTEMP) value-added product (VAP) and the procedures used to derive atmospheric temperature profiles from the raw RL measurements. Sections 2 and 4 describe the input and output variables, respectively. Section 3 discusses the theory behind the measurement and the details of the algorithm, including calibration and overlap correction.

  4. Maryland Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    NA 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) NA 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) NA 1967-2010 Marketed Production (Million Cubic Ft.) 43 34 44 32 20 27

  5. Michigan Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    151,886 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 496,371 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.79 1967-2010 Marketed Production (Million Cubic Ft.) 131,118 138,162 129,333 123,622 115,065 107,634

  6. Mississippi Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    73,721 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 307,738 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.17 1967-2010 Marketed Production (Million Cubic Ft.) 73,721 81,487 63,843 59,272 54,446 58,207

  7. Missouri Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    0 1984-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 0 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 1967-1997 Marketed Production (Million Cubic Ft.) NA NA NA 9 3 1

  8. Montana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    7,539 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 318,286 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.64 1967-2010 Marketed Production (Million Cubic Ft.) 87,539 74,624 66,954 63,242 59,160 57,421

  9. Nebraska Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,231 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 8,888 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.98 1967-2010 Marketed Production (Million Cubic Ft.) 2,231 1,959 1,328 1,032 417 477

  10. Nevada Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    NA 2006-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) NA 0 0 0 0 2006-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) NA 2006-2010 Marketed Production (Million Cubic Ft.) 4 3 4 3 3 3 1991

  11. Alabama Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    212,769 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 994,688 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.46 1967-2010 Marketed Production (Million Cubic Ft.) 222,932 195,581 215,710 196,326 181,060 168,249

  12. Alaska Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    316,546 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,185,249 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.17 1967-2010 Marketed Production (Million Cubic Ft.) 374,226 356,225 351,259 338,182 345,310 343,534

  13. Arizona Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    165 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 753 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.11 1967-2010 Marketed Production (Million Cubic Ft.) 183 168 117 72 106 95

  14. California Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    251,559 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,396,916 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.87 1967-2010 Marketed Production (Million Cubic Ft.) 286,841 250,177 246,822 252,310 238,988 231,060

  15. New York Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    35,241 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 166,532 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.65 1967-2010 Marketed Production (Million Cubic Ft.) 35,813 31,124 26,424 23,458 20,201 17,829

  16. North Dakota Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,837 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 320,783 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.92 1967-2010 Marketed Production (Million Cubic Ft.) 81,837 97,102 172,242 235,711 326,491 471,504

  17. Ohio Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    78,122 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 362,000 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.63 1967-2010 Marketed Production (Million Cubic Ft.) 78,122 78,858 84,482 166,017 512,371 1,014,848

  18. Oregon Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    376 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,919 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.92 1979-2010 Marketed Production (Million Cubic Ft.) 1,407 1,344 770 770 1,142 848 1979

  19. Value of Underground Storage in Today's Natural Gas Industry, The

    Reports and Publications

    1995-01-01

    This report explores the significant and changing role of storage in the industry by examining the value of natural gas storage; short-term relationships between prices, storage levels, and weather; and some longer term impacts of the Federal Energy Regulatory Commission's (FERC) Order 636.

  20. Tennessee Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    5,144 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 22,384 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.35 1967-2010 Marketed Production (Million Cubic Ft.) 5,144 4,851 5,825 5,400 5,294 4,276

  1. Utah Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    385,917 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,825,566 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 432,045 457,525 490,393 470,863 454,545 423,300

  2. Indiana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    6,802 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 28,058 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.13 1967-2010 Marketed Production (Million Cubic Ft.) 6,802 9,075 8,814 7,938 6,616 7,25

  3. Kansas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    325,591 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1,372,159 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 324,720 309,124 296,299 292,467 286,480 285,236

  4. Kentucky Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    135,355 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 604,675 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.47 1967-2010 Marketed Production (Million Cubic Ft.) 135,330 124,243 106,122 94,665 93,091 85,775

  5. Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

    SciTech Connect

    Glass, L.R.; Jones, T.D.; Easterly, C.E.; Walsh, P.J.

    1990-10-01

    It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address the problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs.

  6. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect

    Auburn Machinery, Inc.

    2004-07-15

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated

  7. Tennessee Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Tennessee Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,950 5,022 4,686 3,464 2,707 2,100 1,900 1990's 2,067 1,856 1,770 1,660 1,990 1,820 1,690 1,510 1,420 1,230 2000's 1,150 2,000 2,050 1,803 2,100 2,200 2,663 3,942 4,700 5,478 2010's 5,144 - = No Data Reported; --

  8. Texas Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Texas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 6,227,995 6,630,246 6,367,936 6,465,964 6,414,021 6,386,544 6,276,968 1990's 6,476,032 6,066,256 5,893,069 5,769,437 5,834,671 5,592,323 4,684,140 4,716,304 4,777,945 5,719,128 2000's 5,869,901 5,159,233 5,166,315

  9. Pennsylvania Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Pennsylvania Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 118,372 166,342 150,234 159,889 163,318 167,089 191,774 1990's 177,609 152,500 138,675 189,443 187,113 177,139 0 0 0 0 2000's 0 0 0 0 NA NA NA NA NA NA 2010's NA - = No Data Reported; -- = Not Applicable; NA =

  10. Louisiana Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Louisiana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3,149,192 3,650,412 3,179,306 2,986,468 3,243,795 3,158,903 3,066,789 1990's 3,780,551 3,355,867 3,404,963 3,454,646 3,562,360 3,709,015 3,976,305 5,398,216 5,410,523 5,265,670 2000's 3,587,815 1,529,733 1,365,925

  11. Michigan Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Michigan Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 138,910 144,537 131,855 127,287 146,996 146,145 155,988 1990's 106,193 189,497 190,637 199,746 216,268 238,203 245,740 305,950 278,076 277,364 2000's 296,556 275,036 274,476 236,987 259,681 261,112 NA NA 153,130

  12. Mississippi Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Mississippi Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,116 206,871 178,426 197,217 195,299 196,912 148,167 1990's 149,012 126,637 129,340 131,450 105,646 95,349 88,805 98,075 88,723 83,232 2000's 70,965 76,986 112,979 133,901 145,692 52,923 60,531 73,460 96,641

  13. Montana Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Montana Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 47,751 47,534 46,113 42,203 42,814 47,748 52,044 1990's 45,998 48,075 50,359 58,810 51,953 46,739 46,868 50,409 51,967 55,780 2000's 67,294 78,493 86,075 86,027 90,771 101,666 106,843 110,942 802,619 293,941 2010's

  14. Nebraska Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Nebraska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 2,091 2,300 1,944 1,403 1,261 910 878 1990's 793 785 1,177 1,375 2,098 1,538 1,332 1,194 1,285 1,049 2000's 879 883 892 1,168 1,172 1,172 NA 1,555 3,082 2,908 2010's 2,231 - = No Data Reported; -- = Not Applicable;

  15. Ohio Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Ohio Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 149,096 184,651 180,458 180,287 164,960 166,690 159,730 1990's 154,619 146,189 143,381 135,939 130,855 125,085 119,251 116,246 108,542 102,505 2000's 98,551 97,272 103,158 120,081 119,847 83,523 86,315 88,095 84,858

  16. Oklahoma Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oklahoma Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 1,730,061 1,985,869 1,936,341 1,917,493 2,004,797 2,106,632 2,185,204 1990's 2,186,153 2,119,161 1,937,224 2,005,971 1,879,257 1,765,788 1,751,487 1,452,233 1,644,531 1,577,961 2000's 1,612,890 1,477,058 1,456,375

  17. Oregon Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Oregon Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 3 2,790 4,080 4,600 3,800 4,000 2,500 1990's 2,815 2,741 2,580 4,003 3,221 1,923 1,439 1,173 1,067 1,291 2000's 1,214 1,069 837 688 467 433 NA 390 751 751 2010's 1,376 - = No Data Reported; -- = Not Applicable; NA =

  18. Recommended values of clean metal surface work functions

    SciTech Connect

    Derry, Gregory N. Kern, Megan E.; Worth, Eli H.

    2015-11-15

    A critical review of the experimental literature for measurements of the work functions of clean metal surfaces of single-crystals is presented. The tables presented include all results found for low-index crystal faces except cases that were known to be contaminated surfaces. These results are used to construct a recommended value of the work function for each surface examined, along with an uncertainty estimate for that value. The uncertainties are based in part on the error distribution for all measured work functions in the literature, which is included here. The metals included in this review are silver (Ag), aluminum (Al), gold (Au), copper (Cu), iron (Fe), iridium (Ir), molybdenum (Mo), niobium (Nb), nickel (Ni), palladium (Pd), platinum (Pt), rhodium (Rh), ruthenium (Ru), tantalum (Ta), and tungsten (W)

  19. Graphics processing units accelerated semiclassical initial value representation molecular dynamics

    SciTech Connect

    Tamascelli, Dario; Dambrosio, Francesco Saverio; Conte, Riccardo; Ceotto, Michele

    2014-05-07

    This paper presents a Graphics Processing Units (GPUs) implementation of the Semiclassical Initial Value Representation (SC-IVR) propagator for vibrational molecular spectroscopy calculations. The time-averaging formulation of the SC-IVR for power spectrum calculations is employed. Details about the GPU implementation of the semiclassical code are provided. Four molecules with an increasing number of atoms are considered and the GPU-calculated vibrational frequencies perfectly match the benchmark values. The computational time scaling of two GPUs (NVIDIA Tesla C2075 and Kepler K20), respectively, versus two CPUs (Intel Core i5 and Intel Xeon E5-2687W) and the critical issues related to the GPU implementation are discussed. The resulting reduction in computational time and power consumption is significant and semiclassical GPU calculations are shown to be environment friendly.

  20. Alaska Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Alaska Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 211,569 211,579 222,637 304,841 271,120 228,284 192,760 1990's 191,798 200,557 206,259 224,786 201,891 227,797 193,278 191,017 192,982 186,727 2000's 189,896 197,735 200,871 199,616 413,667 502,887 494,323

  1. Arkansas Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Arkansas Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 78,097 75,575 86,552 68,206 42,688 102,046 42,226 1990's 99,456 83,864 85,177 122,596 24,326 180,117 76,671 71,449 61,012 54,382 2000's 55,057 16,901 161,871 166,329 183,299 190,533 193,491 269,886 446,551 680,613

  2. California Quantity of Production Associated with Reported Wellhead Value

    Energy Information Administration (EIA) (indexed site)

    (Million Cubic Feet) Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) California Quantity of Production Associated with Reported Wellhead Value (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 282,639 343,079 361,739 329,366 346,720 327,399 283,509 1990's 275,738 211,841 195,515 76,381 199,649 263 37,823 219,216 264,810 382,715 2000's 323,864 328,778 309,399 293,691 276,520 274,817 278,933 268,016

  3. Organic Aerosol Component (OACOMP) Value-Added Product Report

    SciTech Connect

    Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

    2013-08-23

    Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

  4. Louisiana Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,140,525 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 9,345,006 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.23 1967-2010 Marketed Production (Million Cubic Ft.) 2,210,099 3,029,206 2,955,437 2,360,202 1,960,813 1,776,800

  5. Arkansas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    936,600 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 3,556,609 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.84 1967-2010 Marketed Production (Million Cubic Ft.) 926,639 1,072,212 1,146,168 1,139,654 1,122,733 1,010,274

  6. Recovery of aluminum and other metal values from fly ash

    DOEpatents

    McDowell, William J.; Seeley, Forest G.

    1981-01-01

    The invention described herein relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  7. Recovery of aluminum and other metal values from fly ash

    DOEpatents

    McDowell, W.J.; Seeley, F.G.

    1979-11-01

    The invention relates to a method for improving the acid leachability of aluminum and other metal values found in fly ash which comprises sintering the fly ash, prior to acid leaching, with a calcium sulfate-containing composition at a temperature at which the calcium sulfate is retained in said composition during sintering and for a time sufficient to quantitatively convert the aluminum in said fly ash into an acid-leachable form.

  8. ARM Climate Research Facility Quarterly Value-Added Product Report

    SciTech Connect

    Sivaraman, Chitra

    2013-07-31

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  9. Wyoming Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    2,318,486 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 9,913,756 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.30 1967-2010 Marketed Production (Million Cubic Ft.) 2,305,525 2,159,422 2,022,275 1,858,207 1,794,413 1,793,716

  10. New Mexico Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,287,399 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,878,560 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 5.32 1967-2010 Marketed Production (Million Cubic Ft.) 1,292,185 1,237,303 1,215,773 1,171,640 1,229,519 1,244,811

  11. Oklahoma Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,408,061 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 8,606,898 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.71 1967-2010 Marketed Production (Million Cubic Ft.) 1,827,328 1,888,870 2,023,461 1,993,754 2,331,086 2,499,599

  12. Microsoft Word - Web Posting for Earned Value Management.doc

    Office of Environmental Management (EM)

    CONTRACTOR EARNED VALUE MANAGEMENT SYSTEM CERTIFICATION STATUS (as of September 19, 2016) DOE Office (Geographic Site) Contract Name Contractor Name Principal Companies Certified Green = Yes Red = No Carlsbad Field Office (Carlsbad, NM) Waste Isolation Pilot Project Management and Operations Contract (Note 1) Nuclear Waste Partnership, LLC URS Energy and Construction, Inc. Babcock & Wilcox Technical Services Group, LLC AREVA Federal Services, LLC Savannah River (Aiken, SC) Salt Waste

  13. Texas Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    7,470,752 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 31,535,019 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.70 1967-2010 Marketed Production (Million Cubic Ft.) 6,715,294 7,112,863 7,475,495 7,633,618 7,985,019 7,880,530

  14. COLLOQUIUM: History, Applications, Numerical Values and Problems with the

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Calculation of EROI - Energy Return on (Energy) Investment | Princeton Plasma Physics Lab March 2, 2016, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: History, Applications, Numerical Values and Problems with the Calculation of EROI - Energy Return on (Energy) Investment Professor Charles Hall State University of NY College of Environmental Science and Forestry Plants and animals are subjected to fierce selective pressure to do the "right thing" energetically, that is to

  15. Colorado Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1,548,576 1983-2010 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 6,250,380 0 0 0 0 1989-2014 Wellhead Price (Dollars per Thousand Cubic Ft.) 3.96 1967-2010 Marketed Production (Million Cubic Ft.) 1,578,379 1,637,576 1,709,376 1,604,860 1,643,487 1,704,836

  16. U.S. Natural Gas Wellhead Value and Marketed Production

    Energy Information Administration (EIA) (indexed site)

    1980-2006 Imputed Wellhead Value of Marketed Production (Thousand Dollars) 1989-2006 Wellhead Price (Dollars per Thousand Cubic Ft.) 4.48 3.95 2.66 NA NA NA 1922-2015 Marketed Production (Million Cubic Ft.) 22,381,873 24,036,352 25,283,278 25,562,232 27,497,754 28,752,935 1900

  17. Grid-Interactive Renewable Water Heating Economic and Environmental Value

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 Grid-Interactive Renewable Water Heating Economic and Environmental Value Grid-interactive renewable water heaters have smart controls that quickly change their charge rate and charge level, factoring in renewable generation and other critical needs of the grid; thereby significantly reducing carbon emissions and bringing a new dimension of conservation and efficiency to the electric grid. The Steffes grid-interactive renewable water heater controller provides utilities with an affordable and

  18. PROCESS OF ELIMINATING HYDROGEN PEROXIDE IN SOLUTIONS CONTAINING PLUTONIUM VALUES

    DOEpatents

    Barrick, J.G.; Fries, B.A.

    1960-09-27

    A procedure is given for peroxide precipitation processes for separating and recovering plutonium values contained in an aqueous solution. When plutonium peroxide is precipitated from an aqueous solution, the supernatant contains appreciable quantities of plutonium and peroxide. It is desirable to process this solution further to recover plutonium contained therein, but the presence of the peroxide introduces difficulties; residual hydrogen peroxide contained in the supernatant solution is eliminated by adding a nitrite or a sulfite to this solution.

  19. Challenges in determining b value in the Northwest Geysers

    SciTech Connect

    Saltiel, S.; Boyle, K.; Majer, E.

    2011-02-01

    Past analyses of the Gutenberg-Richter b-value in the Geysers and other geothermal settings have revealed a deviation from the assumed linear relationship in log space between magnitude and the number of earthquakes. In this study of the Northwest Geysers, we found a gently-sloping discontinuity in the b-value curve. This is especially apparent when comparing the least-squares fit (LSQ) of the curve to the fit obtained by the maximum likelihood estimation (MLE), a widely-respected method of analyzing magnitude-frequency relationships. This study will describe the assumptions made when using each of these two methods and will also explore how they can be used in conjunction to investigate the characteristics of the observed b-value curve. To understand whether slope-fit differences in the LSQR and MLE methods is due to physical properties of the system or due to artifacts from errors in sampling, it is extremely important to consider the catalog completeness, magnitude bin size, number of events, and differences in source mechanisms for the events comprising the study volume. This work will hopefully lead to informative interpretations of frequency-magnitude curves for the Northwest Geysers, a geothermal area of ongoing high-volume coldwater injection and steam production. Through this statistical investigation of the catalog contents, we hope to better understand the dominant source mechanisms and the role of injected fluids in the creation of seismic clustering around nearly 60 wells of varying depths and injection volumes.

  20. Automatic Pole and Q-Value Extraction for RF Structures

    SciTech Connect

    C. Potratz, H.-W. Glock, U. van Rienen, F. Marhauser

    2011-09-01

    The experimental characterization of RF structures like accelerating cavities often demands for measuring resonant frequencies of Eigenmodes and corresponding (loaded) Q-values over a wide spectral range. A common procedure to determine the Q-values is the -3dB method, which works well for isolated poles, but may not be applicable directly in case of multiple poles residing in close proximity (e.g. for adjacent transverse modes differing by polarization). Although alternative methods may be used in such cases, this often comes at the expense of inherent systematic errors. We have developed an automation algorithm, which not only speeds up the measurement time significantly, but is also able to extract Eigenfrequencies and Q-values both for well isolated and overlapping poles. At the same time the measurement accuracy may be improved as a major benefit. To utilize this procedure merely complex scattering parameters have to be recorded for the spectral range of interest. In this paper we present the proposed algorithm applied to experimental data recorded for superconducting higher-order-mode damped multi-cell cavities as an application of high importance.

  1. New space value of the solar oblateness obtained with PICARD

    SciTech Connect

    Irbah, Abdanour; Meftah, Mustapha; Hauchecorne, Alain; Bocquier, Maxime; Cisse, E. Momar; Djafer, Djelloul; Corbard, Thierry

    2014-04-20

    The PICARD spacecraft was launched on 2010 June 15 with the scientific objective of studying the geometry of the Sun. It is difficult to measure solar oblateness because images are affected by optical distortion. Rolling the satellite, as done in previous space missions, determines the contribution of the telescope by assuming that the geometry of the Sun is constant during the observations. The optical response of the telescope is considered to be time-invariant during the roll operations. This is not the case for PICARD because an orbital signature is clearly observed in the solar radius computed from its images. We take this effect into account and provide the new space value of solar oblateness from PICARD images recorded in the solar continuum at 535.7 nm on 2011 July 4-5. The equator-pole radius difference is 8.4 ± 0.5 mas, which corresponds to an absolute radius difference of 6.1 km. This coincides with the mean value of all solar oblateness measurements obtained during the last two decades from the ground, balloons, and space. It is also consistent with values determined from models using helioseismology data.

  2. AskIT Service Desk Support Value Model

    SciTech Connect

    Ashcraft, Phillip Lynn; Cummings, Susan M.; Fogle, Blythe G.; Valdez, Christopher D.

    2015-08-07

    The value model discussed herein provides an accurate and simple calculation of the funding required to adequately staff the AskIT Service Desk (SD).  The model is incremental – only technical labor cost is considered.  All other costs, such as management, equipment, buildings, HVAC, and training are considered common elements of providing any labor related IT Service. Depending on the amount of productivity loss and the number of hours the defect was unresolved, the value of resolving work from the SD is unquestionably an economic winner; the average cost of $16 per SD resolution can commonly translate to cost avoidance exceeding well over $100. Attempting to extract too much from the SD will likely create a significant downside. The analysis used to develop the value model indicates that the utilization of the SD is very high (approximately 90%).  As a benchmark, consider a comment from a manager at Vitalyst (a commercial IT service desk) that their utilization target is approximately 60%.  While high SD utilization is impressive, over the long term it is likely to cause unwanted consequences to staff such as higher turnover, illness, or burnout.  A better solution is to staff the SD so that analysts have time to improve skills through training, develop knowledge, improve processes, collaborate with peers, and improve customer relationship skills.

  3. Appraising the value of independent EIA follow-up verifiers

    SciTech Connect

    Wessels, Jan-Albert

    2015-01-15

    Independent Environmental Impact Assessment (EIA) follow-up verifiers such as monitoring agencies, checkers, supervisors and control officers are active on various construction sites across the world. There are, however, differing views on the value that these verifiers add and very limited learning in EIA has been drawn from independent verifiers. This paper aims to appraise how and to what extent independent EIA follow-up verifiers add value in major construction projects in the developing country context of South Africa. A framework for appraising the role of independent verifiers was established and four South African case studies were examined through a mixture of site visits, project document analysis, and interviews. Appraisal results were documented in the performance areas of: planning, doing, checking, acting, public participating and integration with other programs. The results indicate that independent verifiers add most value to major construction projects when involved with screening EIA requirements of new projects, allocation of financial and human resources, checking legal compliance, influencing implementation, reporting conformance results, community and stakeholder engagement, integration with self-responsibility programs such as environmental management systems (EMS), and controlling records. It was apparent that verifiers could be more creatively utilized in pre-construction preparation, providing feedback of knowledge into assessment of new projects, giving input to the planning and design phase of projects, and performance evaluation. The study confirms the benefits of proponent and regulator follow-up, specifically in having independent verifiers that disclose information, facilitate discussion among stakeholders, are adaptable and proactive, aid in the integration of EIA with other programs, and instill trust in EIA enforcement by conformance evaluation. Overall, the study provides insight on how to harness the learning opportunities

  4. Characterization of Representative Materials in Support of Safe, Long Term Storage of Surplus Plutonium in DOE-STD-3013 Containers

    SciTech Connect

    Narlesky, Joshua E.; Stroud, Mary Ann; Smith, Paul Herrick; Wayne, David M.; Mason, Richard E.; Worl, Laura A.

    2013-02-15

    The Surveillance and Monitoring Program is a joint Los Alamos National Laboratory/Savannah River Site effort funded by the Department of Energy-Environmental Management to provide the technical basis for the safe, long-term storage (up to 50 years) of over 6 metric tons of plutonium stored in over 5,000 DOE-STD-3013 containers at various facilities around the DOE complex. The majority of this material is plutonium that is surplus to the nuclear weapons program, and much of it is destined for conversion to mixed oxide fuel for use in US nuclear power plants. The form of the plutonium ranges from relatively pure metal and oxide to very impure oxide. The performance of the 3013 containers has been shown to depend on moisture content and on the levels, types and chemical forms of the impurities. The oxide materials that present the greatest challenge to the storage container are those that contain chloride salts. Other common impurities include oxides and other compounds of calcium, magnesium, iron, and nickel. Over the past 15 years the program has collected a large body of experimental data on 54 samples of plutonium, with 53 chosen to represent the broader population of materials in storage. This paper summarizes the characterization data, moisture analysis, particle size, surface area, density, wattage, actinide composition, trace element impurity analysis, and shelf life surveillance data and includes origin and process history information. Limited characterization data on fourteen nonrepresentative samples is also presented.

  5. Characterization of representative materials in support of safe, long term storage of surplus plutonium in DOE-STD-3013 containers

    SciTech Connect

    Smith, Paul H; Narlesky, Joshua E; Worl, Laura A; Gillispie, Obie W

    2010-01-01

    The Surveillance and Monitoring Program (SMP) is a joint LANL/SRS effort funded by DOE/EM to provide the technical basis for the safe, long-term storage (up to 50 years) of over 6 metric tons of plutonium stored in over 5000 DOE-STD-3013 containers at various facilities around the DOE complex. The majority of this material is plutonium that is surplus to the nuclear weapons program, and much of it is destined for conversion to mixed oxide fuel for use in US nuclear power plants. The form of the plutonium ranges from relatively pure metal and oxide to very impure oxide. The performance of the 3013 containers has been shown to depend on moisture content and on the levels, types and chemical forms of the impurities. The oxide materials that present the greatest challenge to the storage container are those that contain chloride salts. The chlorides (NaCl, KCl, CaCl{sub 2}, and MgCl{sub 2}) range from less than half of the impurities present to nearly all the impurities. Other common impurities include oxides and other compounds of calcium, magnesium, iron, and nickel. Over the past 15 years the program has collected a large body of experimental data on over 60 samples of plutonium chosen to represent the broader population of materials in storage. This paper will summarize the characterization data, including the origin and process history, particle size, surface area, density, calorimetry, chemical analysis, moisture analysis, prompt gamma, gas generation and corrosion behavior.

  6. Long term out-of-pile thermocouple tests in conditions representative for nuclear gas-cooled high temperature reactors

    SciTech Connect

    Laurie, M.; Fourrez, S.; Fuetterer, M. A.; Lapetite, J. M.

    2011-07-01

    During irradiation tests at high temperature, failure of commercial Inconel 600 sheathed thermocouples is commonly encountered. To understand and remedy this problem, out-of-pile tests were performed with thermocouples in carburizing atmospheres which can be assumed to be at least locally representative for High Temperature Reactors. The objective was to screen those thermocouples which would consecutively be used under irradiation. Two such screening tests have been performed with a set of thermocouples embedded in graphite (mainly conventional Type N thermocouples and thermocouples with innovative sheaths) in a dedicated furnace with helium flushing. Performance indicators such as thermal drift, insulation and loop resistance were monitored and compared to those from conventional Type N thermocouples. Several parameters were investigated: niobium sleeves, bending, thickness, sheath composition, temperature as well as the chemical environment. After the tests, Scanning Electron Microscopy (SEM) examinations were performed to analyze possible local damage in wires and in the sheath. The present paper describes the two experiments, summarizes results and outlines further work, in particular to further analyze the findings and to select suitable thermocouples for qualification under irradiation. (authors)

  7. Genome analysis of Elusimicrobium minutum, the first cultivated representative of the Elusimicrobia phylum (formerly Termite Group 1)

    SciTech Connect

    Herlemann, D. P. R.; Geissinger, O.; Ikeda-Ohtsubo, W.; Kunin, V.; Sun, H.; Lapidus, A.; Hugenholtz, P.; Brune, A.

    2009-02-01

    The candidate phylum Termite group 1 (TG1), is regularly 1 encountered in termite hindguts but is present also in many other habitats. Here we report the complete genome sequence (1.64 Mbp) of Elusimicrobium minutum strain Pei191{sup T}, the first cultured representative of the TG1 phylum. We reconstructed the metabolism of this strictly anaerobic bacterium isolated from a beetle larva gut and discuss the findings in light of physiological data. E. minutum has all genes required for uptake and fermentation of sugars via the Embden-Meyerhof pathway, including several hydrogenases, and an unusual peptide degradation pathway comprising transamination reactions and leading to the formation of alanine, which is excreted in substantial amounts. The presence of genes encoding lipopolysaccharide biosynthesis and the presence of a pathway for peptidoglycan formation are consistent with ultrastructural evidence of a Gram-negative cell envelope. Even though electron micrographs showed no cell appendages, the genome encodes many genes putatively involved in pilus assembly. We assigned some to a type II secretion system, but the function of 60 pilE-like genes remains unknown. Numerous genes with hypothetical functions, e.g., polyketide synthesis, non-ribosomal peptide synthesis, antibiotic transport, and oxygen stress protection, indicate the presence of hitherto undiscovered physiological traits. Comparative analysis of 22 concatenated single-copy marker genes corroborated the status of Elusimicrobia (formerly TG1) as a separate phylum in the bacterial domain, which was so far based only on 16S rRNA sequence analysis.

  8. THE SPITZER EXTRAGALACTIC REPRESENTATIVE VOLUME SURVEY: THE ENVIRONMENTS OF HIGH-z SDSS QUASI-STELLAR OBJECTS

    SciTech Connect

    Falder, J. T.; Stevens, J. A.; Jarvis, Matt J.; Bonfield, D. G.; Lacy, M.; Farrah, D.; Oliver, S.; Surace, J.; Mauduit, J.-C.; Gonzalez-Solares, E.; Afonso, J.; Cava, A.; Seymour, N.

    2011-07-10

    This paper presents a study of the environments of SDSS quasi-stellar objects (QSOs) in the Spitzer Extragalactic Representative Volume Survey (SERVS). We concentrate on the high-redshift QSOs as these have not been studied in large numbers with data of this depth before. We use the IRAC 3.6-4.5 {mu}m color of objects and ancillary r-band data to filter out as much foreground contamination as possible. This technique allows us to find a significant (>4{sigma}) overdensity of galaxies around QSOs in a redshift bin centered on z {approx} 2.0 and an (>2{sigma}) overdensity of galaxies around QSOs in a redshift bin centered on z {approx} 3.3. We compare our findings to the predictions of a semi-analytic galaxy formation model, based on the {Lambda}CDM MILLENNIUM simulation, and find for both redshift bins that the model predictions match well the source density we have measured from the SERVS data.

  9. Systems configured to distribute a telephone call, communication systems, communication methods and methods of routing a telephone call to a service representative

    DOEpatents

    Harris, Scott H.; Johnson, Joel A.; Neiswanger, Jeffery R.; Twitchell, Kevin E.

    2004-03-09

    The present invention includes systems configured to distribute a telephone call, communication systems, communication methods and methods of routing a telephone call to a customer service representative. In one embodiment of the invention, a system configured to distribute a telephone call within a network includes a distributor adapted to connect with a telephone system, the distributor being configured to connect a telephone call using the telephone system and output the telephone call and associated data of the telephone call; and a plurality of customer service representative terminals connected with the distributor and a selected customer service representative terminal being configured to receive the telephone call and the associated data, the distributor and the selected customer service representative terminal being configured to synchronize, application of the telephone call and associated data from the distributor to the selected customer service representative terminal.

  10. Value of Solar. Program Design and Implementation Considerations

    SciTech Connect

    Taylor, Mike; McLaren, Joyce; Cory, Karlynn; Davidovich, Ted; Sterling, John; Makhyoun, Miriam

    2015-03-01

    Here, we present an analysis that assesses the potential market type that might form in the United States under a VOS rate, given current national average solar costs and various incentive scenarios, for the most populous city in each state. Three hypothetical VOS tariffs were developed, based on assumptions of avoided fuel costs, avoided capacity, environmental benefits, and line losses, to represent a of range of possible VOS rates. The levelized cost of solar in 50 locations is calculated using NREL’s System Advisor Model (SAM) using input assumptions regarding system size, resource quality, avoided capacity (aka capacity factor) and a variety of incentives. Comparing the solar costs with the hypothetical VOS rates illustrates the various market types that may form under a VOS program, in different locations.

  11. Defining and Computing a Valued Based Cyber-Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2012-01-01

    In earlier work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  12. Defining and Computing a Value Based Cyber-Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In past work, we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities\\; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper we discuss the specification and design of a system that collects, updates and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  13. RECOVERY OF URANIUM VALUES FROM URANIUM BEARING RAW MATERIALS

    DOEpatents

    Michal, E.J.; Porter, R.R.

    1959-06-16

    Uranium leaching from ground uranium-bearing raw materials using MnO/sub 2/ in H/sub 2/SO/sub 4/ is described. The MnO/sub 2/ oxidizes U to the leachable hexavalent state. The MnO/sub 2/ does not replace Fe normally added, because the Fe complexes P and catalyzes the MnO/sub 2/ reaction. Three examples of continuous processes are given, but batch operation is also possible. The use of MnO/sub 2/ makes possible recovery of very low U values. (T.R.H.)

  14. Reliability of initial-value MHD calculations of tokamak disruptions

    SciTech Connect

    Hicks, H.R.; Carreras, B.A.; Garcia, L.; Holmes, J.A.

    1984-06-01

    We have proposed the nonlinear coupling of resistive tearing modes as the mechanism for some tokamak disruptions. This is based primarily on initial-value resistive magnetohydrodynamic calculations performed with a finite-difference grid in minor radius and Fourier series expansion in the poloidal and toroidal angles. The calculations show that, for certain q profiles, the nonlinear interaction of tearing modes of different helicities leads to the rapid destabilization of other modes. The resulting effects and the time scale are consistent with the tokamak disruption.

  15. Decommissioning Cost Estimating Factors And Earned Value Integration

    SciTech Connect

    Sanford, P.C.; Cimmarron, E.

    2008-07-01

    The Rocky Flats 771 Project progressed from the planning stage of decommissioning a plutonium facility, through the strip-out of highly-contaminated equipment, removal of utilities and structural decontamination, and building demolition. Actual cost data was collected from the strip-out activities and compared to original estimates, allowing the development of cost by equipment groupings and types and over time. Separate data was developed from the project control earned value reporting and compared with the equipment data. The paper discusses the analysis to develop the detailed factors for the different equipment types, and the items that need to be considered during characterization of a similar facility when preparing an estimate. The factors are presented based on direct labor requirements by equipment type. The paper also includes actual support costs, and examples of fixed or one-time start-up costs. The integration of the estimate and the earned value system used for the 771 Project is also discussed. The paper covers the development of the earned value system as well as its application to a facility to be decommissioned and an existing work breakdown structure. Lessons learned are provided, including integration with scheduling and craft supervision, measurement approaches, and verification of scope completion. In summary: The work of decommissioning the Rocky Flats 771 Project process equipment was completed in 2003. Early in the planning process, we had difficulty in identifying credible data and implementing processes for estimating and controlling this work. As the project progressed, we were able to collect actual data on the costs of removing plutonium contaminated equipment from various areas over the life of this work and associate those costs with individual pieces of equipment. We also were able to develop and test out a system for measuring the earned value of a decommissioning project based on an evolving estimate. These were elements that

  16. Optimum value of original events on the PEPT technique

    SciTech Connect

    Sadremomtaz, Alireza; Taherparvar, Payvand

    2011-12-26

    Do Positron emission particle tracking (PEPT) has been used to track the motion of a single radioactively labeled tracer particle within a bed of similar particles. In this paper, the effect of the original event fraction on the results precise in two experiments has been reviewed. Results showed that the algorithm can no longer distinguish some corrupt trajectories, in addition to; further iteration reduces the statistical significance of the sample without improving its quality. Results show that the optimum value of trajectories depends on the type of experiment.

  17. Valuing the Environmental Benefits of Urban WaterConservation

    SciTech Connect

    Coughlin, Katie M.; Bolduc, Chris A.; Chan, Peter T.; Dunham-Whitehead, C.; Van Buskirk, R.D.

    2007-05-01

    This report documents a project undertaken for theCalifornia Urban Water Conservation Council (the Council) to create a newmethod of accounting for the diverse environmental benefits of raw watersavings. The environmental benefits (EB) model was designed to providewater utilities with a practical tool that they can use to assign amonetary value to the benefits that may accrue from implementing any ofthe Council-recommended Best Management Practices. The model treats onlyenvironmental services associated directly with water, and is intended tocover miscellaneous impacts that are not currently accounted for in anyother cost-benefit analysis.

  18. Resolving the sign ambiguity in the singular value decomposition.

    SciTech Connect

    Bro, Rasmus; Acar, Evrim; Kolda, Tamara Gibson

    2007-10-01

    Many modern data analysis methods involve computing a matrix singular value decomposition (SVD) or eigenvalue decomposition (EVD). Principal components analysis is the time-honored example, but more recent applications include latent semantic indexing, hypertext induced topic selection (HITS), clustering, classification, etc. Though the SVD and EVD are well-established and can be computed via state-of-the-art algorithms, it is not commonly mentioned that there is an intrinsic sign indeterminacy that can significantly impact the conclusions and interpretations drawn from their results. Here we provide a solution to the sign ambiguity problem and show how it leads to more sensible solutions.

  19. Method of absorbance correction in a spectroscopic heating value sensor

    DOEpatents

    Saveliev, Alexei; Jangale, Vilas Vyankatrao; Zelepouga, Sergeui; Pratapas, John

    2013-09-17

    A method and apparatus for absorbance correction in a spectroscopic heating value sensor in which a reference light intensity measurement is made on a non-absorbing reference fluid, a light intensity measurement is made on a sample fluid, and a measured light absorbance of the sample fluid is determined. A corrective light intensity measurement at a non-absorbing wavelength of the sample fluid is made on the sample fluid from which an absorbance correction factor is determined. The absorbance correction factor is then applied to the measured light absorbance of the sample fluid to arrive at a true or accurate absorbance for the sample fluid.

  20. Conformal coating value/risk assessment for Sandia satellite programs.

    SciTech Connect

    Russick, Edward Mark; Thayer, Gayle Echo

    2008-03-01

    Conformal coatings are used in space applications on printed circuit board (PCB) assemblies primarily as a protective barrier against environmental contaminants. Such coatings have been used at Sandia for decades in satellite applications including the GPS satellite program. Recently, the value of conformal coating has been questioned because it is time consuming (requiring a 5-6 week schedule allowance) and delays due to difficulty of repairs and rework performed afterward are troublesome. In an effort to find opportunities where assembly time can be reduced, a review of the literature as well as discussions with satellite engineers both within and external to Sandia regarding the value of conformal coating was performed. Several sources on the value of conformal coating, the functions it performs, and on whether coatings are necessary and should be used at all were found, though nearly all were based on anecdotal information. The first section of this report, titled 'Conformal Coating for Space Applications', summarizes the results of an initial risk-value assessment of the conformal coating process for Sandia satellite programs based on information gathered. In the process of collecting information to perform the assessment, it was necessary to obtain a comprehensive understanding of the entire satellite box assembly process. A production time-line was constructed and is presented in the second section of this report, titled 'Satellite Box Assembly', specifically to identify potential sources of time delays, manufacturing issues, and component failures related to the conformal coating process in relation to the box assembly. The time-line also allows for identification of production issues that were anecdotally attributed to the conformal coating but actually were associated with other production steps in the box assembly process. It was constructed largely in consultation with GPS program engineers with empirical knowledge of times required to complete the

  1. Vocational Rehabilitation -Value Added: Explaining What We Do,

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Vocational Rehabilitation -Value Added: Explaining What We Do, Craig Bock, MA, CRC Washington State IARP Quarterly Newsletter - June 2009 If you have an injury at work, do you know what happens next or how you would navigate the Workers' Compensation system should you need to? What does RCW 51.32.095 (state law) and WAC 296-19A-070 (administrative rules) mean to you? If you could not return to your job and had permanent physical or cognitive restrictions who would help you explore your return to

  2. DEVELOPMENT OF VADOSE-ZONE HYDRAULIC PARAMETER VALUES

    SciTech Connect

    ROGERS PM

    2008-01-21

    Several approaches have been developed to establish a relation between the soil-moisture retention curve and readily available soil properties. Those relationships are referred to as pedotransfer functions. Described in this paper are the rationale, approach, and corroboration for use of a nonparametric pedotransfer function for the estimation of soil hydraulic-parameter values at the yucca Mountain area in Nevada for simulations of net infiltration. This approach, shown to be applicable for use at Yucca Mountain, is also applicable for use at the Hanford Site where the underlying data were collected.

  3. Imputed Wellhead Value of Natural Gas Marketed Production

    Energy Information Administration (EIA) (indexed site)

    Thousand Dollars) Data Series: Quantity of Production Imputed Wellhead Value Wellhead Price Marketed Production Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2009 2010 2011 2012 2013 2014 View History U.S. 1989-2006 Alabama 1,020,599 994,688 0 0 0 0 1989-2014 Alaska 1,163,554 1,185,249 0 0 0 0 1989-2014 Arizona 2,269 753 0 0 0 0 1989-2014 Arkansas 2,330,692 3,556,609 0 0 0 0

  4. Signal evaluations using singular value decomposition for Thomson scattering diagnostics

    SciTech Connect

    Tojo, H., E-mail: tojo.hiroshi@jaea.go.jp; Yatsuka, E.; Hatae, T.; Itami, K. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka 311-0193 (Japan); Yamada, I.; Yasuhara, R.; Funaba, H.; Hayashi, H. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki 509-5292 (Japan)

    2014-11-15

    This paper provides a novel method for evaluating signal intensities in incoherent Thomson scattering diagnostics. A double-pass Thomson scattering system, where a laser passes through the plasma twice, generates two scattering pulses from the plasma. Evaluations of the signal intensities in the spectrometer are sometimes difficult due to noise and stray light. We apply the singular value decomposition method to Thomson scattering data with strong noise components. Results show that the average accuracy of the measured electron temperature (T{sub e}) is superior to that of temperature obtained using a low-pass filter (<20 MHz) or without any filters.

  5. The Impact of Emission and Climate Change on Ozone in the United States under Representative Concentration Pathways (RCPs)

    SciTech Connect

    Gao, Yang; Fu, Joshua S.; Drake, John B.; Lamarque, J.-F.; Liu, Yang

    2013-09-27

    Dynamical downscaling was applied in this study to link the global climate-chemistry model Community Atmosphere Model (CAM-Chem) with the regional models: Weather Research and Forecasting (WRF) Model and Community Multi-scale Air Quality (CMAQ). Two Representative Concentration Pathway (RCP) scenarios (RCP 4.5 and RCP 8.5) were used to evaluate the climate impact on ozone concentrations in 2050s. Ozone concentrations in the lower-mid troposphere (surface to ~300 hPa), from mid- to high latitudes in the Northern Hemisphere (NH), show decreasing trends in RCP 4.5 between 2000s and 2050s, with the largest decrease of 4-10 ppbv occurring in the summer and the fall; and increasing trends (2-12 ppbv) in RCP 8.5 resulting from the increased methane emissions. In RCP 8.5, methane emissions increase by ~60% by the end of 2050s, accounting for more than 90% of ozone increases in summer and fall, and 60-80% in spring and winter. Under the RCP 4.5 scenario, in the summer when photochemical reactions are the most active, the large ozone precursor emissions reduction leads to the greatest decrease of downscaled surface ozone concentrations, ranging from 6 to 10 ppbv. However, a few major cities show ozone increases of 3 to 7 ppbv due to weakened NO titration. Under the RCP 8.5 scenario, in winter, downscaled ozone concentrations increase across nearly the entire continental US in winter, ranging from 3 to 10 ppbv due to increased methane emissions and enhanced stratosphere-troposphere exchange (STE). More intense heat waves are projected to occur by the end of 2050s in RCP 8.5, leading to more than 8 ppbv of the maximum daily 8-hour daily average (MDA8) ozone during the heat wave days than other days; this indicates the dramatic impact heat waves exert on high frequency ozone events.

  6. Meeting the Radiative Forcing Targets of the Representative Concentration Pathways in a World with Agricultural Climate Impacts

    SciTech Connect

    Kyle, G. Page; Mueller, C.; Calvin, Katherine V.; Thomson, Allison M.

    2014-02-28

    This study assesses how climate impacts on agriculture may change the evolution of the agricultural and energy systems in meeting the end-of-century radiative forcing targets of the Representative Concentration Pathways (RCPs). We build on the recently completed ISI-MIP exercise that has produced global gridded estimates of future crop yields for major agricultural crops using climate model projections of the RCPs from the Coupled Model Intercomparison Project Phase 5 (CMIP5). For this study we use the bias-corrected outputs of the HadGEM2-ES climate model as inputs to the LPJmL crop growth model, and the outputs of LPJmL to modify inputs to the GCAM integrated assessment model. Our results indicate that agricultural climate impacts generally lead to an increase in global cropland, as compared with corresponding emissions scenarios that do not consider climate impacts on agricultural productivity. This is driven mostly by negative impacts on wheat, rice, other grains, and oil crops. Still, including agricultural climate impacts does not significantly increase the costs or change the technological strategies of global, whole-system emissions mitigation. In fact, to meet the most aggressive climate change mitigation target (2.6 W/m2 in 2100), the net mitigation costs are slightly lower when agricultural climate impacts are considered. Key contributing factors to these results are (a) low levels of climate change in the low-forcing scenarios, (b) adaptation to climate impacts, simulated in GCAM through inter-regional shifting in the production of agricultural goods, and (c) positive average climate impacts on bioenergy crop yields.

  7. 2D Gridded Surface Data Value-Added Product

    SciTech Connect

    Tang, Q; Xie, S

    2015-08-30

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) 2-dimensional (2D) gridded surface data (ARMBE2DGRID) value-added product. Spatial variability is critically important to many scientific studies, especially those that involve processes of great spatial variations at high temporal frequency (e.g., precipitation, clouds, radiation, etc.). High-density ARM sites deployed at the Southern Great Plains (SGP) allow us to observe the spatial patterns of variables of scientific interests. The upcoming megasite at SGP with its enhanced spatial density will facilitate the studies at even finer scales. Currently, however, data are reported only at individual site locations at different time resolutions for different datastreams. It is difficult for users to locate all the data they need and requires extra effort to synchronize the data. To address these problems, the ARMBE2DGRID value-added product merges key surface measurements at the ARM SGP sites and interpolates the data to a regular 2D grid to facilitate the data application.

  8. Display device for indicating the value of a parameter in a process plant

    DOEpatents

    Scarola, Kenneth; Jamison, David S.; Manazir, Richard M.; Rescorl, Robert L.; Harmon, Daryl L.

    1993-01-01

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

  9. Algal Pretreatment Improves Biofuels Yield and Value; Highlights in Science, NREL (National Renewable Energy Laboratory)

    SciTech Connect

    2015-05-15

    One of the major challenges associated with algal biofuels production in a biorefinery-type setting is improving biomass utilization in its entirety, increasing the process energetic yields and providing economically viable and scalable co-product concepts. We demonstrate the effectiveness of a novel, integrated technology based on moderate temperatures and low pH to convert the carbohydrates in wet algal biomass to soluble sugars for fermentation, while making lipids more accessible for downstream extraction and leaving a protein-enriched fraction behind. This research has been highlighted in the Green Chemistry journal article mentioned above and a milestone report, and is based on the work the researchers are doing for the AOP projects Algal Biomass Conversion and Algal Biofuels Techno-economic Analysis. That work has demonstrated an advanced process for algal biofuel production that captures the value of both the algal lipids and carbohydrates for conversion to biofuels.  With this process, as much as 150 GGE/ton of biomass can be produced, 2-3X more than can be produced by terrestrial feedstocks.  This can also reduce the cost of biofuel production by as much as 40%. This also represents the first ever design case for the algal lipid upgrading pathway.

  10. Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

    SciTech Connect

    Gamberini, R. Del Buono, D.; Lolli, F.; Rimini, B.

    2013-11-15

    Highlights: • Collection and analysis of real life data in the field of Municipal Solid Waste (MSW) generation and costs for management. • Study of 92 virtuous Italian communities. • Elaboration of trends of engineering indexes useful during design and evaluation of MSWM systems. - Abstract: The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.

  11. Matrix-valued polynomials in Lanczos type methods

    SciTech Connect

    Simoncini, V.; Gallopoulos, E.

    1994-12-31

    It is well known that convergence properties of iterative methods can be derived by studying the behavior of the residual polynomial over a suitable domain of the complex plane. Block Krylov subspace methods for the solution of linear systems A[x{sub 1},{hor_ellipsis}, x{sub s}] = [b{sub 1},{hor_ellipsis}, b{sub s}] lead to the generation of residual polynomials {phi}{sub m} {element_of} {bar P}{sub m,s} where {bar P}{sub m,s} is the subset of matrix-valued polynomials of maximum degree m and size s such that {phi}{sub m}(0) = I{sub s}, R{sub m} := B - AX{sub m} = {phi}{sub m}(A) {circ} R{sub 0}, where {phi}{sub m}(A) {circ} R{sub 0} := R{sub 0} - A{summation}{sub j=0}{sup m-1} A{sup j}R{sub 0}{xi}{sub j}, {xi}{sub j} {element_of} R{sup sxs}. An effective method has to balance adequate approximation with economical computation of iterates defined by the polynomial. Matrix valued polynomials can be used to improve the performance of block methods. Another approach is to solve for a single right-hand side at a time and use the generated information in order to update the approximations of the remaining systems. In light of this, a more general scheme is as follows: A subset of residuals (seeds) is selected and a block short term recurrence method is used to compute approximate solutions for the corresponding systems. At the same time the generated matrix valued polynomial is implicitly applied to the remaining residuals. Subsequently a new set of seeds is selected and the process is continued as above, till convergence of all right-hand sides. The use of a quasi-minimization technique ensures a smooth convergence behavior for all systems. In this talk the authors discuss the implementation of this class of algorithms and formulate strategies for the selection of parameters involved in the computation. Experiments and comparisons with other methods will be presented.

  12. Electrorecycling of Critical and Value Metals from Mobile Electronics

    SciTech Connect

    Lister, Tedd E.; Wang, Peming; Anderko, Andre

    2014-09-01

    Mobile electronic devices such as smart phones and tablets are a significant source of valuable metals that should be recycled. Each year over a billion devices are sold world-wide and the average life is only a couple years. Value metals in phones are gold, palladium, silver, copper, cobalt and nickel. Devices now contain increasing amounts of rare earth elements (REE). In recent years the supply chain for REE has moved almost exclusively to China. They are contained in displays, speakers and vibrators within the devices. By US Department of Energy (DOE) classification, specific REEs (Nd, Dy, Eu, Tb and Y) are considered critical while others (Ce, La and Pr) are deemed near critical. Effective recycling schemes should include the recovery of these critical materials. By including more value materials in a recovery scheme, more value can be obtained by product diversification and less waste metals remains to be disposed of. REEs are mined as a group such that when specific elements become critical significantly more ore must be processed to capture the dilute but valuable critical elements. Targeted recycling of items containing the more of the less available critical materials could address their future criticality. This presentation will describe work in developing aqueous electrochemistry-based schemes for recycling metals from scrap mobile electronics. The electrorecycling process generates oxidizing agents at an anode while reducing dissolved metals at the cathode. E vs pH diagrams and metals dissolution experiments are used to assess effectiveness of various solution chemistries. Although several schemes were envisioned, a two stages process has been the focus of work: 1) initial dissolution of Cu, Sn, Ag and magnet materials using Fe+3 generated in acidic sulfate and 2) final dissolution of Pd and Au using Cl2 generated in an HCl solution. Experiments were performed using simulated metal mixtures. Both Cu and Ag were recovered at ~ 97% using Fe+3 while

  13. Defining and Computing a Valued Based Cyber Security Measure

    SciTech Connect

    Aissa, Anis Ben; Abercrombie, Robert K; Sheldon, Frederick T; Mili, Ali

    2011-01-01

    In earlier works (Ben-Aissa et al. 2010; Abercrombie et al. 2008; Sheldon et al. 2009), we presented a value based measure of cybersecurity that quantifies the security of a system in concrete terms, specifically, in terms of how much each system stakeholder stands to lose (in dollars per hour of operation) as a result of security threats and system vulnerabilities; our metric varies according to the stakes that each stakeholder has in meeting each security requirement. In this paper, we discuss the specification and design of a system that collects, updates, and maintains all the information that pertains to estimating our cybersecurity measure, and offers stakeholders quantitative means to make security-related decisions.

  14. Modeling and Analysis Session: Market, Value, and Policy Analysis (Presentation)

    SciTech Connect

    Margolis, R. M.

    2008-04-01

    The Primary objectives: to provide a broad range of analytical support to the Solar Program; and to anticipate and respond to the rapidly evolving analytical needs of the Solar Program. Three broad types of analysis are being carried out under this project including: (1) Market analysis: Developing a PV market penetration model--the SolarDS model--and other tools, in order to gain insight into the factors influencing market penetration of PV technology in U.S. markets. (2) Value analysis: Providing inputs to, support for, and review of the annual GPRA benefits analysis. Also developing methods and tools for improving the quantification of the benefits and cost of solar technologies. (3) Policy analysis: Defining and carrying out analysis that meets the needs of the Solar Energy Technologies Program in a timely fashion, for example evaluating the potential role of solar in the energy economy in the long-term.

  15. Doppler Lidar Vertical Velocity Statistics Value-Added Product

    SciTech Connect

    Newsom, R. K.; Sivaraman, C.; Shippert, T. R.; Riihimaki, L. D.

    2015-07-01

    Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

  16. Considering value of information when using CFD in design

    SciTech Connect

    Misra, John Satprim

    2009-12-19

    This thesis presents an approach to find lower resolution CFD models that can accurately lead a designer to a correct decision at a lower computational cost. High-fidelity CFD models often contain too much information and come at a higher computational cost, limiting the designs a designer can test and how much optimization can be performed on the design. Lower model resolution is commonly used to reduce computational time. However there are no clear guidelines on how much model accuracy is required. Instead experience and intuition are used to select an appropriate lower resolution model. This thesis presents an alternative to this ad hoc method by considering the added value of the addition information provided by increasing accurate and more computationally expensive models.

  17. Station-based Surface Data Value-Added Product

    SciTech Connect

    Tang, Q.; Xie, S.

    2015-07-01

    This report describes the Atmospheric Radiation Measurement (ARM) Best Estimate (ARMBE) station-based surface data (ARMBESTNS) value-added product. It is a twin data product of the ARMBE 2-Dimensional gridded (ARMBE2DGRID) data set. Unlike the ARMBE2DGRID data set, ARMBESTNS data are reported at the original site locations and show the original information (except for the interpolation over time). Therefore, the users have the flexibility to process the data with the approach more suitable for their applications. This document provides information about the input data, quality control (QC) method, and output format of this data set. As much of the information is identical to that of the ARMBE2DGRID data, this document will emphasize more on the different aspects of these two data sets.

  18. Value of Demand Response: Quantities from Production Cost Modeling (Presentation)

    SciTech Connect

    Hummon, M.

    2014-04-01

    Demand response (DR) resources present a potentially important source of grid flexibility particularly on future systems with high penetrations of variable wind and solar power generation. However, managed loads in grid models are limited by data availability and modeling complexity. This presentation focuses on the value of co-optimized DR resources to provide energy and ancillary services in a production cost model. There are significant variations in the availabilities of different types of DR resources, which affect both the operational savings as well as the revenue for each DR resource. The results presented include the system-wide avoided fuel and generator start-up costs as well as the composite revenue for each DR resource by energy and operating reserves. In addition, the revenue is characterized by the capacity, energy, and units of DR enabled.

  19. Analysis of Solar Census Remote Solar Access Value Calculation Methodology

    SciTech Connect

    Nangle, J.; Dean, J.; Van Geet, O.

    2015-03-01

    The costs of photovoltaic (PV) system hardware (PV panels, inverters, racking, etc.) have fallen dramatically over the past few years. Nonhardware (soft) costs, however, have failed to keep pace with the decrease in hardware costs, and soft costs have become a major driver of U.S. PV system prices. Upfront or 'sunken' customer acquisition costs make up a portion of an installation's soft costs and can be addressed through software solutions that aim to streamline sales and system design aspects of customer acquisition. One of the key soft costs associated with sales and system design is collecting information on solar access for a particular site. Solar access, reported in solar access values (SAVs), is a measurement of the available clear sky over a site and is used to characterize the impacts of local shading objects. Historically, onsite shading studies have been required to characterize the SAV of the proposed array and determine the potential energy production of a photovoltaic system.

  20. Value Engineering Study for Closing Waste Packages Containing TAD Canisters

    SciTech Connect

    Colleen Shelton-Davis

    2005-11-01

    The Office of Civilian Radioactive Waste Management announced their intention to have the commercial utilities package spent nuclear fuel in shielded, transportable, ageable, and disposable containers prior to shipment to the Yucca Mountain repository. This will change the conditions used as a basis for the design of the waste package closure system. The environment is now expected to be a low radiation, low contamination area. A value engineering study was completed to evaluate possible modifications to the existing closure system using the revised requirements. Four alternatives were identified and evaluated against a set of weighted criteria. The alternatives are (1) a radiation-hardened, remote automated system (the current baseline design); (2) a nonradiation-hardened, remote automated system (with personnel intervention if necessary); (3) a nonradiation-hardened, semi-automated system with personnel access for routine manual operations; and (4) a nonradiation-hardened, fully manual system with full-time personnel access. Based on the study, the recommended design is Alternative 2, a nonradiation-hardened, remote automated system. It is less expensive and less complex than the current baseline system, because nonradiation-hardened equipment can be used and some contamination control equipment is no longer needed. In addition, the inclusion of remote automation ensures throughput requirements are met, provides a more reliable process, and provides greater protection for employees from industrial accidents and radiation exposure than the semi-automated or manual systems. Other items addressed during the value engineering study as requested by OCRWM include a comparison to industry canister closure systems and corresponding lessons learned; consideration of closing a transportable, ageable, and disposable canister; and an estimate of the time required to perform a demonstration of the recommended closure system.