National Library of Energy BETA

Sample records for form eia-176 survey

  1. Microsoft Word - eia176_usersguide_Jan-2015_JW_no_appendixes...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    EIA-176 Electronic Filing System (EFS) User's Guide For Report Year 2014 U.S. Department of Energy January 2015 Form EIA-176 Electronic Filing System User's Guide January 2015...

  2. EIA-176 Form

    Energy Information Administration (EIA) (indexed site)

    This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other ...

  3. EIA-176 Instructions

    Gasoline and Diesel Fuel Update

    ... Data cannot be entered interactively on the web site. SECURE FILE TRANSFER Forms may be ... standard method to send information over the web using a secure, encrypted process. ...

  4. Microsoft Word - eia176_usersguide_Jan-2016.docx

    Gasoline and Diesel Fuel Update

    ... form completion instructions), to the EIA web site, at this address: http:www.eia.gov... A m ) You have tw EIA's web s submission submitting f found at: where C:E change from ...

  5. Design Code Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Design Code Survey Form Design Code Survey Form Survey of Safety Software Used in Design of Structures, Systems, and Components 1. Introduction The Department's Implementation Plan ...

  6. FAQs for Survey Forms 804 and 814

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    intended for cracking into olefins. EIA-804 Survey form & instructions Contact: Robert Merriam, (202) 586-4615 EIA-814 Survey form & instructions Contact: Chris Buckner, (202)...

  7. FAQs for Survey Form EIA-7A

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form(Includes Instructions). Calculator Conversion calculator Who can I contact? Survey ...

  8. FAQs for Survey Form EIA-8A

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for other coal definitions. How does EIA classify coal rank? Rank ... Form (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  9. FAQs for Survey Form EIA-3

    Gasoline and Diesel Fuel Update

    ... See the EIA Glossary for coal definitions. How does EIA classify coal rank? Rank types ... Forms (Includes Instructions) Calculator Conversion calculator Who can I contact? Survey ...

  10. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update

    ... May the oil or gas volumes be submitted separately? Where are oil sales submitted (web or ... If you're using the web form there are comments you can select from the drop down list or ...

  11. Technetium Immobilization Forms Literature Survey

    SciTech Connect

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  12. Mediation Survey Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon Mediation Survey Form More Documents & Publications Microsoft Word - GC Mediation Evaluation 2-06-09.doc Mediation Brochure FIA-12-0044 - In the Matter of Cynthia Brown...

  13. EIA-176 Electronic Filing System (EFS)

    Annual Energy Outlook

    Administration (EIA), U.S. Department of Energy (DOE), to fulfill its responsibilities ... 7, 8, or 10) At least 20.0 megabytes of free disk space on the hard drive Downloading ...

  14. FAQs for Survey Form EIA-14

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    These prices are published in the following tables of the Petroleum Marketing Monthly ... If you are interested in receiving this free software, contact the Survey Respondent ...

  15. FAQs for Survey Form EIA-182

    Annual Energy Outlook

    price(s) are published in the Petroleum Marketing Monthly, the Monthly Energy Review, the ... If you are interested in receiving this free software, contact the Survey Respondent ...

  16. FAQs for Survey Form EIA-782C

    Annual Energy Outlook

    ... software, contact the Survey Respondent Service Team at 202-586-9659. Where can I find published data from the EIA-782C? These data are published in the Petroleum Marketing ...

  17. FAQs for Survey Form EIA-821

    Gasoline and Diesel Fuel Update

    of your email. Should I report biodiesel on the EIA-821 survey? Report B2, B5, or B20 biodiesel under the primary fuel type with which it was blended and the type of customer...

  18. FAQs for Survey Form EIA-782A

    Gasoline and Diesel Fuel Update

    ... Information from this form is provided to the Defense Energy Support Center for market value analysis. For more information on data confidentiality, please see Section 8, ...

  19. PIA - Form EIA-475 A/G Residential Energy Consumption Survey...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PIA - Form EIA-475 AG Residential Energy Consumption Survey PIA ...

  20. On-Line User Survey Form to provide feedback for the DOE Occupational...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure...

  1. On-Line User Survey Form to provide feedback for the DOE Occupational

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Radiation Exposure Report | Department of Energy User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report May 30, 2014 Radiation Exposure Monitoring System (REMS) User Feedback Survey. On-Line User Survey Form to provide feedback for the DOE Occupational Radiation Exposure Report (172.74 KB) More Documents & Publications Annual DOE Occupational Radiation Exposure

  2. FORM EIA-23L ANNUAL SURVEY OF DOMESTIC OIL AND GAS RESERVES

    Energy Information Administration (EIA) (indexed site)

    Date: 7312016 Version No.: 2016.01 FORM EIA-23L ANNUAL SURVEY OF DOMESTIC OIL AND GAS RESERVES SURVEY YEAR 2015 COVER PAGE This report is mandatory under the Federal ...

  3. Frequently Asked Questions Form EIA-23L Annual Survey of Domestic...

    Energy Information Administration (EIA) (indexed site)

    ... EIA recommends submitting the form electronically via RIGS. Electronic: RIGS; see below ... OOG.Surveys@eia.gov or 1-800-879-1470 to report any changes to your company's structure. ...

  4. Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Access Procedures for New Users Deposition Request Form Exit Form Flycutting Request Form Hot Embossing Request Form Metrology Request Form Microfabrication Project Proposal Form...

  5. Natural Gas Annual Respondent Query System

    Gasoline and Diesel Fuel Update

    (Volumes in Thousand Cubic Feet, Prices in Dollars per Thousand Cubic Feet) Form EIA-176 * User Guide * Definitions, Sources, & Notes Natural Gas Deliveries (2011 - 2014)...

  6. NEAR-INFRARED CIRCULAR POLARIZATION SURVEY IN STAR-FORMING REGIONS: CORRELATIONS AND TRENDS

    SciTech Connect

    Kwon, Jungmi; Tamura, Motohide; Hough, James H.; Lucas, Phil W.; Kusakabe, Nobuhiko; Kandori, Ryo; Nagata, Tetsuya; Nakajima, Yasushi; Nagayama, Takahiro

    2014-11-01

    We have conducted a systematic near-infrared circular polarization (CP) survey in star-forming regions, covering high-mass, intermediate-mass, and low-mass young stellar objects. All the observations were made using the SIRPOL imaging polarimeter on the Infrared Survey Facility 1.4m telescope at the South African Astronomical Observatory. We present the polarization properties of 10 sub-regions in 6 star-forming regions. The polarization patterns, extents, and maximum degrees of linear and circular polarizations are used to determine the prevalence and origin of CP in the star-forming regions. Our results show that the CP pattern is quadrupolar in general, the CP regions are extensive, up to 0.65pc, the CP degrees are high, up to 20%, and the CP degrees decrease systematically from high- to low-mass young stellar objects. The results are consistent with dichroic extinction mechanisms generating the high degrees of CP in star-forming regions.

  7. THE EGNoG SURVEY: MOLECULAR GAS IN INTERMEDIATE-REDSHIFT STAR-FORMING GALAXIES

    SciTech Connect

    Bauermeister, A.; Blitz, L.; Wright, M.; Bolatto, A.; Teuben, P.; Bureau, M.; Leroy, A.; Ostriker, E.; Wong, T.

    2013-05-10

    We present the Evolution of molecular Gas in Normal Galaxies (EGNoG) survey, an observational study of molecular gas in 31 star-forming galaxies from z = 0.05 to z = 0.5, with stellar masses of (4-30) Multiplication-Sign 10{sup 10} M{sub Sun} and star formation rates of 4-100 M{sub Sun} yr{sup -1}. This survey probes a relatively un-observed redshift range in which the molecular gas content of galaxies is expected to have evolved significantly. To trace the molecular gas in the EGNoG galaxies, we observe the CO(J = 1 {yields} 0) and CO(J = 3 {yields} 2) rotational lines using the Combined Array for Research in Millimeter-wave Astronomy (CARMA). We detect 24 of 31 galaxies and present resolved maps of 10 galaxies in the lower redshift portion of the survey. We use a bimodal prescription for the CO to molecular gas conversion factor, based on specific star formation rate, and compare the EGNoG galaxies to a large sample of galaxies assembled from the literature. We find an average molecular gas depletion time of 0.76 {+-} 0.54 Gyr for normal galaxies and 0.06 {+-} 0.04 Gyr for starburst galaxies. We calculate an average molecular gas fraction of 7%-20% at the intermediate redshifts probed by the EGNoG survey. By expressing the molecular gas fraction in terms of the specific star formation rate and molecular gas depletion time (using typical values), we also calculate the expected evolution of the molecular gas fraction with redshift. The predicted behavior agrees well with the significant evolution observed from z {approx} 2.5 to today.

  8. Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    132014 10:58 AM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act...

  9. Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9:27 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act (FOIA)...

  10. Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  11. Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted : on this form. t Name Richard van Dijk Email , Orga nizati on Mailin g Addre ss city PA State I P Pion e Ex....

  12. Surveys

    Energy.gov [DOE]

    Surveys can be a useful way to gauge the opinions of your readers and learn more about your website's audiences, but you'll often need approval from the Office of Management and Budget (OMB) to run...

  13. gas rates | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    as far as I'm aware. That may be a dataset that is added in the future. You can access natural gas prices by utility and sector by downloading the EIA-176 form from the Energy...

  14. Microsoft Word - figure_16.doc

    Energy Information Administration (EIA) (indexed site)

    2 4 6 8 10 2010 2011 2012 2013 2014 Residential Commercial Industrial Electric Po wer Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and ...

  15. Mediation Survey Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of my concerns. 6. I think that my relationship with the other person will be improved ... What suggestionscomments do you have to improve the mediation program? Please feel free ...

  16. 2015

    Energy Information Administration (EIA) (indexed site)

    64 0 2 4 6 8 10 12 14 16 1980 1982 1984 1986 1988 1990 1992 1994 1996 1998 2000 2002 2004 2006 2008 2010 2012 2014 Sources: Nominal dollars: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition," and Form EIA-910, "Monthly Natural Gas Marketer Survey." Constant dollars: Prices were converted to 2009 dollars using the chain-type price indexes for Gross Domestic Product (2009 = 1.0) as published by the U.S.

  17. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update

    be reported for that area. If there are no operated properties in an area, leave the cell blank for that area. What units should I use to report the production volumes? Report...

  18. 2012 Uranium Survey Form Proposals

    Gasoline and Diesel Fuel Update

    Information and Regulatory Affairs, Office of Management and Budget, New Executive Office Building, Room 10102, 735 17th Street, NW, Washington, DC 20503, and to Douglas Bonnar,...

  19. 2013 Electricity Form Proposals

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Form EIA-861, "Annual Electric Power Industry Report" The EIA-861 survey has historically collected retail sales, revenue, and a variety of information related to demand response ...

  20. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    (Photovoltaic) Survey Forms November 19, 2015 In early 2016 the U.S. Energy Information ... Details will be provided closer to that date. Proposed changes as of December 2015 Forms ...

  1. Service Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form...

  2. ORPS Facility Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form Design Code Survey Form Federal Building Energy Use Benchmarking Guidance, August ...

  3. JLF Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    jlf forms JLF Forms JLF Target Fab Request JLF Experiment Worksheet JLF-Experimental Team Registration Form JLF-LLNL Participant Registration Form JLF-External Participant Registration Form JLF-Debriefing Form

  4. Paperwork Reduction Act Forms

    Office of Energy Efficiency and Renewable Energy (EERE)

    You may need to fill out one or several of these forms depending on the nature of your survey or usability project. See the Paperwork Reduction Act Web page for more information about the process. Contact the Web Usability Coordinator if you have questions about which forms to complete.

  5. Online Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  6. FAQs for Survey Form EIA-856

    Annual Energy Outlook

    In such civil action, the court may also issue mandatory injunctions commanding any person to comply with these reporting requirements. What are criteria for resubmissions?...

  7. FAQs for Survey Forms 805 and 815

    Annual Energy Outlook

    use and loss column should only be used to report losses caused by spills, fires, contamination, and volumes used as fuel at a terminal. Data reported in these cells and all...

  8. FAQs for Survey Forms 802 and 812

    Gasoline and Diesel Fuel Update

    ppm sulfur and under" include fuel with sulfur content greater than 15 ppm but within test tolerance, and fuel with sulfur content greater than 15 ppm during transitions or other ...

  9. > FAQs for Survey Form EIA-888

    Gasoline and Diesel Fuel Update

    Fax - fax price(s) to a secure, toll-free fax number, 1-877-359-6637 Telephone ... of the Federal Energy Administration Act of 1974 (FEAA) (Public Law 93-275), as amended. ...

  10. FAQs for Survey Form EIA-878

    Annual Energy Outlook

    Fax - fax prices to a secure, toll-free fax number, 1-877-359-6637 Telephone ... of the Federal Energy Administration Act of 1974 (FEAA) (Public Law 93-275), as amended. ...

  11. FAQs for Survey Forms EIA-861

    Gasoline and Diesel Fuel Update

    Make sure that you are using Internet Explorer or Safari as your web browser. Make sure ... A blank web page (IE) A message saying "Your connection to the server was interrupted" ...

  12. FAQs for Survey Forms 809 and 819

    Gasoline and Diesel Fuel Update

    The Secure File Transfer System uses the secure hypertext transfer protocol (HTTPS), an industry standard method to send information over the web using secure, encrypted processes. ...

  13. FAQs for Survey Forms EIA-826

    Gasoline and Diesel Fuel Update

    Make sure that you're using Google Chrome or Internet Explorer as your web browser; ... User gets blank web page (IE) "Your connection to the server was interrupted" before the ...

  14. Residential Commercial Industrial Electric Power

    Energy Information Administration (EIA) (indexed site)

    63 dollars per thousand cubic feet 0 2 4 6 8 10 12 2011 2012 2013 2014 2015 Residential Commercial Industrial Electric Power Notes: Coverage for prices varies by consumer sector. Prices are in nominal dollars. See Appendix A for further discussion on consumer prices. Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-923, "Power Plant Operations Report"; and Form EIA-910,

  15. EIA-412 Form and Instructions

    Gasoline and Diesel Fuel Update

    METHOD OF FILING RESPONSE Submit your data electronically over the Internet using our web-based form. Log on to https:elecidc.eia.doe.gov Web-based Survey Information EIA uses ...

  16. ARM - Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Send Forms To assist researchers in the conduct of field campaigns or required administrative procedures (such as Baseline Change Requests), we provide a number of...

  17. Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The Research Library may not have the resources to handle all requests from the public. Question? 667-5809 Email The Request Form is for internal use only. Login to SSL-Portal, or ...

  18. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  19. Form Approved

    Gasoline and Diesel Fuel Update

    2014 2015 View History Natural Gas Processed (Million Cubic Feet) 2,915 5,526 2014-2015 Total Liquids Extracted (Thousand Barrels) 173 173 2014-2015 NGPL Production, Gaseous Equivalent (Million Cubic Feet) 233 235 2014

    Approved 0MB No. 1905-0092. El A 457B (Expires May 31, 1990.) This survey is voluntary and authorized under the Federal Energy Administration Act of 1974 (Public Law 93-275} as amended. Information about specific households will be kept strictly confidential. The data will be

  20. Administrative Forms/Policies

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Administrative Forms Microfab Project Proposal Form Exit Form After Hours Request Form

  1. Digital Surveying Directional Surveying Specialists | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying...

  2. Monument Survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Photographs from the WIPP Permanent Marker Monument Survey John Hart & Associates, 2000 Photograph of the Gnome Marker located about 10 miles SW of the WIPP site For more...

  3. Survey Consumption

    Annual Energy Outlook

    purchase diaries from a subset of respondents composing a Household Transportation Panel and is reported separately. Residential Energy Consumption Survey: Consumption and...

  4. radiological. survey

    National Nuclear Security Administration (NNSA)

    7%2A en NNSA to Conduct Aerial Radiological Surveys Over San Francisco, Pacifica, Berkeley, And Oakland, CA Areas http:nnsa.energy.govmediaroompressreleasesamsca

  5. 2005 Residential Energy Consumption Survey

    Energy Information Administration (EIA) (indexed site)

    Completed forms are due by March 4, 2006. If you have any questions, please call (toll-free) 1-NNN-NNN-NNNN. Ask for the Supplier Survey Specialist. This report is mandatory under ...

  6. 2005 Residential Energy Consumption Survey

    Energy Information Administration (EIA) (indexed site)

    Completed forms are due by March 4, 2006. If you have any questions, please call (toll-free) 1-NNN-NNN-NNNN. Ask for the Supplier Survey Specialist.. This report is mandatory under ...

  7. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    Energy Information Administration (EIA) (indexed site)

    and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0 Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form...

  8. EIA - 2008 New Electric Power EIA-923 Form Anticipated Questions

    Energy Information Administration (EIA) (indexed site)

    923 Answers to Anticipated Questions for New Form EIA-923, "Power Plant Operations Report" I am currently registered for the survey Form EIA-906 and/or survey Form EIA-920. Will I need to re-register prior to submitting my data for Form EIA-923? No, you will automatically have access to the new Form EIA-923 once the form is open for data collection. What is Form EIA-923 and why has EIA come up with another form for me to fill out? Form EIA-923 replaces Forms EIA-906, EIA-920, EIA-423,

  9. Densified waste form and method for forming

    SciTech Connect

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  10. Densified waste form and method for forming

    DOEpatents

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  11. C:\\MYDOCS\\CBECS-FORM\\CBECSFRM\\EDSMTRY.pdf

    Energy Information Administration (EIA) (indexed site)

    B (81297) Form Approval Electricity DSM Program Participation OMB No: 1905-0145 Expires: July 31, 1998 Label COMMERCIAL BUILDINGS ENERGY CONSUMPTION SURVEY FOR 1995 SCHEDULE B ) ...

  12. The FMOS-COSMOS survey of star-forming galaxies at z ∼ 1.6. II. The mass-metallicity relation and the dependence on star formation rate and dust extinction

    SciTech Connect

    Zahid, H. J.; Sanders, D. B.; Chu, J.; Hasinger, G.; Kashino, D.; Silverman, J. D.; Kewley, L. J.; Daddi, E.; Renzini, A.; Rodighiero, G.; Nagao, T.; Arimoto, N.; Kartaltepe, J.; Lilly, S. J.; Carollo, C. M.; Maier, C.; Geller, M. J.; Capak, P.; Ilbert, O.; Kajisawa, M.; Collaboration: COSMOS Team; and others

    2014-09-01

    We investigate the relationships between stellar mass, gas-phase oxygen abundance (metallicity), star formation rate (SFR), and dust content of star-forming galaxies at z ∼ 1.6 using Subaru/FMOS spectroscopy in the COSMOS field. The mass-metallicity (MZ) relation at z ∼ 1.6 is steeper than the relation observed in the local universe. The steeper MZ relation at z ∼ 1.6 is mainly due to evolution in the stellar mass where the MZ relation begins to turnover and flatten. This turnover mass is 1.2 dex larger at z ∼ 1.6. The most massive galaxies at z ∼ 1.6 (∼10{sup 11} M {sub ☉}) are enriched to the level observed in massive galaxies in the local universe. The MZ relation we measure at z ∼ 1.6 supports the suggestion of an empirical upper metallicity limit that does not significantly evolve with redshift. We find an anti-correlation between metallicity and SFR for galaxies at a fixed stellar mass at z ∼ 1.6, which is similar to trends observed in the local universe. We do not find a relation between stellar mass, metallicity, and SFR that is independent of redshift; rather, our data suggest that there is redshift evolution in this relation. We examine the relation between stellar mass, metallicity, and dust extinction, and find that at a fixed stellar mass, dustier galaxies tend to be more metal rich. From examination of the stellar masses, metallicities, SFRs, and dust extinctions, we conclude that stellar mass is most closely related to dust extinction.

  13. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  14. C:\\MYDOCS\\CBECS-FORM\\CBECSFRM\\ELECTRIC.WPD

    Energy Information Administration (EIA) (indexed site)

    Commercial Buildings Energy Consumption Survey or FAX to: co Westat, Inc. 1-301-251-2257 1650 Research Blvd. Rockville, MD 20850-9973 Form EIA-871E-A (81297) Form Approval ...

  15. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader. Input data will ...

  16. EIA - 2008 New Electric Power EIA-860 Form Anticipated Questions

    Energy Information Administration (EIA) (indexed site)

    860 Answers to Anticipated Questions for New Form EIA-860, "Annual Electric Generator Report" I am currently registered for the survey Form EIA-860. Will I need to re-register prior to submitting my 2007 data? No, you will automatically have access to the Form EIA-860 once the form is open for data collection. How do I add a newly planned or missing existing electric plant to the Form EIA-860 survey? The respondent cannot add a new electric plant to the survey. EIA has to perform that

  17. U.S. Energy Information Administration | Natural Gas Annual

    Energy Information Administration (EIA) (indexed site)

    22 8.0 5.9 5.0 4.4 3.5 0 2 4 6 8 10 12 2011 2012 2013 2014 2015 Sources: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition"; Form EIA-64A, "Annual Report of the Origin of Natural Gas Liquids Production"; Office of Fossil Energy, U.S. Department of Energy, Natural Gas Imports and Exports; Form EIA-914, "Monthly Natural Gas Production Report"; Form EIA-923, "Power Plant Operations

  18. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    Quarterly Electricity Imports and Exports Report (EIA-111) OMB Clearance Renewal in 2015 ... Report (EIA-111) survey on August 26, 2015. The initial proposals were announced to ...

  19. 2014 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    ... operations, and environmental performance enhanced data on energy efficiency and demand response programs a change to the confidentiality terms of most of the surveys, i.e. ...

  20. FAQs for Survey Forms 800, 810, and 820

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Liquefied Refinery Gases (LRG) are products of refinery processing (distillation, cracking, etc.) of crude oil and unfinished oils and include the following product Codes: - 641 ...

  1. 2001 Residential Energy Consumption Survey Form EIA-457C (2001...

    Gasoline and Diesel Fuel Update

    ... 08 District heat -- Steam or Hot Water, or ...... 09 ......... 03 A SteamHot water system with radiators or convectors in ...

  2. Appendix B Landfill Inspection Forms and Survey Data

    Office of Legacy Management (LM)

    15056 747563.0976 2081656.295 5974.18 N-RIM-PIPE-GG 0.00 0.00 -0.01 76518 747563.0986 2081656.297 5974.17 PIPE-N-RIM-GG 15054 747742.172 2081226.002 6013.25 N-RIM-PIPE-HH ...

  3. Appendix B Landfill Inspection Forms and Survey Data

    Office of Legacy Management (LM)

    ... PIPE FF 13501 747563.10 2081656.31 5974.17 N RIM PIPE GG -0.03 0.03 0.00 13447 747563.08 2081656.34 5974.17 N RIM PIPE GG 13505 747741.64 2081226.20 6013.16 N RIM PIPE HH -0.08 ...

  4. Electricity generator cost data from survey form EIA-860

    Gasoline and Diesel Fuel Update

    Electricity Use as an Indicator of U.S. Economic Activity Vipin Arora and Jozef Lieskovsky November 2014 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. WORKING PAPER SERIES December 2014 Vipin Arora and Jozef Lieskovsky | U.S.

  5. 2009 Residential Energy Consumption Survey Form EIA-457C (2009...

    Energy Information Administration (EIA) (indexed site)

    building at HUBUILDADDRESS. PRELOAD HH UNIT NUMBER: RAUNIT PRELOAD RA CASE ID: ... Expiring Month DD, 20YY 2 PRELOAD HH BUILDING ADDRESS: HUBUILDADDRESS PRELOAD ...

  6. 2012 NERSC User Survey Text

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2012 User Survey Text 2010/2011 User Survey Results 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries

  7. Page 8, Benefit Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Form - 853 Kb - Allows an employee to enroll or waive health insurance coverage. SF-2817 - Life Insurance Election Form (Federal Employee Group Life Insurance) - 120 Kb - ...

  8. Form OE-417

    Energy Information Administration (EIA) (indexed site)

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  9. Commercial Grade Dedication Survey and Training

    Office of Energy Efficiency and Renewable Energy (EERE)

    This survey was conducted to obtain input from EM contractors on processes used to perform Commercial Grade Item (CGI) dedication.  The intended use of this information is to form the basis for...

  10. Form:SampleForm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

  11. Robotic Surveying

    SciTech Connect

    Suzy Cantor-McKinney; Michael Kruzic

    2007-03-01

    -actuated functions to be controlled by an onboard computer. The computer-controlled Speedrower was developed at Carnegie Mellon University to automate agricultural harvesting. Harvesting tasks require the vehicle to cover a field using minimally overlapping rows at slow speeds in a similar manner to geophysical data acquisition. The Speedrower had demonstrated its ability to perform as it had already logged hundreds of acres of autonomous harvesting. This project is the first use of autonomous robotic technology on a large-scale for geophysical surveying.

  12. Manufacturing Energy Consumption Survey (MECS) - Data - U.S....

    Energy Information Administration (EIA) (indexed site)

    Data Methodology & Forms 2006 Data Tables Manufacturing Energy Consumption Survey (MECS) - Data - U.S. Energy Information Administration (EIA) Revision notice (November 2009): ...

  13. Reflection Survey At Snake River Plain Region (DOE GTP) | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Community Login | Sign Up Search Page Edit with form History Reflection Survey At Snake River Plain Region (DOE GTP) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home...

  14. DOCUMENT RELEASE FORM

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    survey video will be recorded. 4.4.5 Opportunistic Rebar Inspection and Testing In the event that rebar is encountered and removed during the SST Sidewall Coring, the rebar will...

  15. OSG New User Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 ...

  16. Microsoft Word - table_21.doc

    Energy Information Administration (EIA) (indexed site)

    9 Table 21. Number of natural gas commercial consumers by type of service and state, 2014-2015 R Revised data. Note: Totals may not equal sum of components due to independent rounding. Source: Energy Information Administration (EIA), Form EIA-176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." Please see the cautionary note regarding the number of residential and commercial customers located on the second page of Appendix A of this report. Alabama R 67,718 129

  17. Annual Electric Utility Data - Form EIA-906 Database

    Energy Information Administration (EIA) (indexed site)

    Detailed data files > Historic Form EIA-906 Historic Form EIA-906 Detailed Data with previous form data (EIA-759) Historic electric utility data files include information on net generation, fuel consumption, fuel stocks, prime mover and fuel type. Data sources are surveys -- Form EIA-906, "Power Plant Report" and Form EIA-759, "Monthly Power Plant Report." Beginning with 1996, two separate files are available for each year: Monthly (M) data submitted by those respondents

  18. FOIA Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please...

  19. Standard Form 120

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    1 OF STANDARD FORM 120 REV. APRIL 1957 GEN. SERV. ADMIN. FPMR (41 CFR) 101-43.311 ... NUMBER FAIR % ITEM DESCRIPTION PER UNIT TOTAL NO. (a) (b) (f) (g) STANDARD FORM 120 REV. ...

  20. DVU Training News Form

    Energy.gov [DOE] (indexed site)

    Training News Form Please complete this form in its entirety and email to ... For Web Team Only NODE DOE F 360.9 (092014) Guidance for Posting to "Training News" ...

  1. Form OE-417

    Energy Information Administration (EIA) (indexed site)

    | U.S. Department of Energy Electricity Delivery and Energy Reliability Form OE-417|ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT|Form Approved OMB No. 1901-0288 Approval...

  2. ARM - Ingest Readiness Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    FormsIngest Readiness Form Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Ingest Readiness

  3. ORSSAB Membership Application Form

    Energy.gov [DOE]

    Resident interested in joining the Oak Ridge Site Specific Advisory Board should complete and submit the included form.

  4. OCPR Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OCPR Forms OCPR Forms Technology Transfer Reporting Form Agreement to Mediate Form Instructions: Fill out the form and e-mail the completed document to Office of Conflict ...

  5. Method for forming ammonia

    DOEpatents

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  6. Paperwork Reductin Act Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PAPERWORK REDUCTION ACT COLLECTION DISCONTINUATION FORM Agency/Subagency OMB Control Number __ __ __ __ - __ __ __ __ Title of Collection: Current Expiration Date Month/Year Requested Expiration Date to Discontinue Collection Month/Year Reason for Discontinuation: Signature of Senior Official or Designee: Date: For OIRA Use ________________________ ________________________ OMB FORM 83-D, 10/04 Reset Form

  7. STEP Participant Survey Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    STEP Participant Survey Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Methods of forming steel

    DOEpatents

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  9. Form EIA-457E (2001) -- Household Bottled Gas Usage

    Energy Information Administration (EIA) (indexed site)

    RoperASW is a well respected survey research firm. You will return your completed forms to ... The government may bring a civil action to prohibit reporting violations which may result ...

  10. DOE Initiative to Improve PM and EVM, Integration Survey Results |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration Survey Results DOE Initiative to Improve PM and EVM, Integration Survey Results Karen Urschel, Humphreys & Associates March 24, 2016 Presentation (563.59 KB) Key Resources Internal DOE Tools PMCDP EVMS PARS IIe FPD Resource Center PM Newsletter Forms and Templates More Documents & Publications Department of Energy Earned Value Management Survey Results

  11. Adoption Assistance Claim Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Certification for Reimbursement Complete all information in this section (child's name, birth date, date child was placed in the employee's home). Send form to the address...

  12. User Financial Account Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  13. User Financial Account Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    102115 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  14. Procurement Forms | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    RFPs relating to construction projects require additional documentation and are located in the "Construction Specific Forms" tab. Representations and Certifications Representations ...

  15. Benefits Forms & Required Notices

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contributions, 3027 (pdf) Universal Beneficiary Designation Change Form, 1938 (pdf) Notices Health Insurance Marketplace Coverage (pdf) HIPAA Special Enrollment Rights Notice (pdf

  16. Product Information Form

    Energy.gov [DOE]

    When planning to present a new product to the EERE Product Governance Team, complete this product information form and email it to ee.communications@ee.doe.gov.

  17. OFFSITE USE FORM

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    OFFSITE USE FORM Fill form out in triplicate, send original to Property Control, m/s 85A, give a copy to the Gate Guard and keep a copy for your files. This form needs to be updated once a year. Stanford Linear Accelerator Center Authorization Record Form: Stanford University Removal of Government Property from SLAC PO Box 4349 premises for Official Use Elsewhere (*) Date: To: Property Control, m/s 85A From: Name E Mail Address Group and Mail Stop SLAC Extension This is to notify you that I have

  18. SGP Shipment Notification Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PlainsShipment Notification Form SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric...

  19. Method of forming nanodielectrics

    DOEpatents

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  20. Method for forming materials

    DOEpatents

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  1. NEPA Litigation Surveys

    Energy.gov [DOE]

    CEQ publishes surveys on NEPA litigation on an annual basis. These surveys identify the number of cases involving a NEPA based cause of action, Federal agencies that were identified as a lead...

  2. 2002 Manufacturing Energy Consumption Survey - User Needs Survey

    Energy Information Administration (EIA) (indexed site)

    2002 Manufacturing Energy Consumption Survey: User-Needs Survey View current results. We need your help in designing the next Energy Consumption Survey (MECS) As our valued...

  3. ORPS Facility Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy AU User Support EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 Note:  Only one facility per form  Type or print all entries 1. TYPE OF CHANGE  Add a Facility (Complete Section 1.A, then go to Section 2)  Change a Facility (Complete Section 1.B, then go to Section)  Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are

  4. Supplier, Vendor Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supplier, Vendor Forms Supplier, Vendor Forms As a premier national research and development laboratory, LANL seeks to do business with qualified companies that offer value and high quality products and services. Contact Small Business Office (505) 667-4419 Email Form No. Name Revision# Revised Date 3500.00.0059 Certification Regarding Former LANS or UC Employees (doc) 0 7/31/2015 3191.00.0993 Small Business Subcontracting Plan (doc) 1 7/9/2015 3251.00.0200 BAA Domestic Construction Materials

  5. Montana MPDES General Information Form (MDEQ Form 1) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    (MDEQ Form 1) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana MPDES General Information Form (MDEQ Form 1) Abstract Completion of form allows...

  6. STANDARD FORM NO. 64

    Office of Legacy Management (LM)

    qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy ...

  7. Image forming apparatus

    DOEpatents

    Satoh, Hisao (Hachioji, JP); Haneda, Satoshi (Hachioji, JP); Ikeda, Tadayoshi (Hachioji, JP); Morita, Shizuo (Hachioji, JP); Fukuchi, Masakazu (Hachioji, JP)

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  8. Forming the Future

    Energy.gov [DOE] (indexed site)

    ... At the tip of the stylus is a traditional quench-and-tempered 52100 steel ball bearing. Ford uses all types of hardened steel styluses of different diameter balls for forming ...

  9. User Financial Account Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  10. Compute Reservation Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Compute Reservation Request Form Compute Reservation Request Form Users can request a scheduled reservation of machine resources if their jobs have special needs that cannot be accommodated through the regular batch system. A reservation brings some portion of the machine to a specific user or project for an agreed upon duration. Typically this is used for interactive debugging at scale or real time processing linked to some experiment or event. It is not intended to be used to guarantee fast

  11. Environmental Survey preliminary report

    SciTech Connect

    Not Available

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  12. 2014 NERSC User Survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    User Survey 2014 NERSC User Survey December 17, 2014 by Francesca Verdier Please take a few minutes to fill out NERSC's annual user survey. Your feedback is important because it allows us to judge the quality of our services, give DOE information on how we are doing, and point us to areas in which we can improve. The survey is on the web at the URL: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2014/ and covers the allocation year 2014. Subscribe via RSS Subscribe

  13. Office of Oil, Gas, and Coal Supply Statistics

    Gasoline and Diesel Fuel Update

    ... Underground storage data reported by companies in Alaska are obtainable in the EIA-176 Query System. b Pipeline and Distribution Use volumes include Line Loss, defined as known ...

  14. Office of Oil, Gas, and Coal Supply Statistics

    Gasoline and Diesel Fuel Update

    ... Underground storage data reported by companies in Alaska are obtainable in the EIA-176 Query System. b Beginning in 2009, Pipeline and Distribution Use volumes now include Line ...

  15. Methods for forming particles

    DOEpatents

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  16. ARM - VAP Suggestion Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July l-September 30, 2015 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or

  17. Realtime Queue Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Realtime Queue Request Form Realtime Queue Request Form NERSC now supports realtime queues on Cori and Edison. Users can request a small number of on-demand nodes if their jobs have special needs that cannot be accommodated through the regular batch system. The real-time queue enables immediate access to a set of nodes, for jobs that are under the realtime wallclock limit (currently 6 hours). Typically this is used for real time processing linked to some experiment or event. It is not intended

  18. ORPS User Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For:  ORPS Submit Completed Form To: EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 U.S. Department of Energy AU User Support (Type or Print) 1. Name Birth date / (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle 3. Company Name 4. Address Mail Stop City State Zip 5. Work Phone Work Fax 6. Internet E-Mail Address (e.g. orpssupport@hq.doe.gov 7. USA Citizenship (check one)  Yes 

  19. Forms | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  20. Coach Compliance Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Coach Compliance Form My team is participating in theNational Renewable Energy Laboratory's Lithium-Ion Battery Car Competition. I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print):

  1. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  2. Method for forming targets

    DOEpatents

    Woerner, Robert L.

    1979-01-01

    Method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  3. Apparatus for forming targets

    DOEpatents

    Woerner, Robert L.

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  4. Formed photovoltaic module busbars

    SciTech Connect

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  5. behavioral-survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Evacuation Behavior Survey for No-Notice Emergency Scenarios" Presentation at the 93rd TRB Annual Meeting at the Traveler Behavior and Values Committee (ADB10) - Behavioral Process subcommittee; January 13, 2014 Joshua Auld, Vadim Sokolov, Rene Bautista, Angela Fontes Transportation Research and Analysis Computing Center Argonne National Laboratory Biography The presentation details a survey on evacuation response behavior that was conducted as a part of the RTSTEP project. The survey was

  6. Community Leaders Survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Community Leaders Survey Community Leaders Survey This survey is a tracking study commissioned by the Lab that helps measure perceived progress in maintaining community relationships and listening and responding to the needs of Northern New Mexico communities. Results help shape and direct the Lab's contributions to the region's future. Latest results show nine-in-ten of the community leaders express satisfaction with LANL's economic impact on the region. Study measures changes in leaders'

  7. Homeowner and Contractor Surveys

    Energy.gov [DOE]

    Better Buildings Neighborhood Program Data and Evaluation Peer Exchange Call: Homeowner and Contractor Surveys, Call Slides and Discussion Summary, January 19, 2012.

  8. ORISE: Characterization surveys

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    objective characterization surveys to define the extent of radiological contamination at sites scheduled for decontamination and decommissioning (D&D). A fundamental...

  9. 2004 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    13 | Next 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  10. 2006 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to provide overall comments about NERSC: Here are the survey results: Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  11. 2005 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    10 | Next 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software...

  12. 2003 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    10 | Next 2003 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction Topics and Changes from...

  13. Formed HIP Can Processing

    SciTech Connect

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  14. FOIA Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Southwestern Power Administration To make an FOIA request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Contact Information Name Organization Address Fax Number Phone Number Email Address Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a

  15. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    LA NEPA COMPLIANCE DETERMINATION FORM PRID - 09P-0059 V2 Page 1 of 8 Project/Activity Title: TA-3 Substation Replacement Project PRID: 09P-0059 V2 Date: February 16, 2016 Purpose: The proposed demolition and replacement of the Los Alamos National Laboratory's (LANL) Technical Area (TA)-3 electrical power substation is needed to provide reliable and efficient electrical distribution systems with sufficient electrical capacity to support the national security missions. The electrical distribution

  16. Nucleon Electromagnetic Form Factors

    SciTech Connect

    Kees de Jager

    2004-08-01

    Although nucleons account for nearly all the visible mass in the universe, they have a complicated structure that is still incompletely understood. The first indication that nucleons have an internal structure, was the measurement of the proton magnetic moment by Frisch and Stern (1933) which revealed a large deviation from the value expected for a point-like Dirac particle. The investigation of the spatial structure of the nucleon, resulting in the first quantitative measurement of the proton charge radius, was initiated by the HEPL (Stanford) experiments in the 1950s, for which Hofstadter was awarded the 1961 Nobel prize. The first indication of a non-zero neutron charge distribution was obtained by scattering thermal neutrons off atomic electrons. The recent revival of its experimental study through the operational implementation of novel instrumentation has instigated a strong theoretical interest. Nucleon electro-magnetic form factors (EMFFs) are optimally studied through the exchange of a virtual photon, in elastic electron-nucleon scattering. The momentum transferred to the nucleon by the virtual photon can be selected to probe different scales of the nucleon, from integral properties such as the charge radius to scaling properties of its internal constituents. Polarization instrumentation, polarized beams and targets, and the measurement of the polarization of the recoiling nucleon have been essential in the accurate separation of the charge and magnetic form factors and in studies of the elusive neutron charge form factor.

  17. 2011 NERSC User Survey (Read Only)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2010/2011 User Survey Results Survey Text 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries facebook icon

  18. Development of Alternative Technetium Waste Forms

    SciTech Connect

    Czerwinski, Kenneth

    2013-09-13

    The UREX+1 process is under consideration for the separation of transuranic elements from spent nuclear fuel. The first steps of this process extract the fission product technicium-99 ({sup 99}Tc) into an organic phase containing tributylphosphate together with uranium. Treatment of this stream requires the separation of Tc from U and placement into a suitable waste storage form. A potential candidate waste form involves immobilizing the Tc as an alloy with either excess metallic zirconium or stainless steel. Although Tc-Zr alloys seem to be promising waste forms, alternative materials must be investigated. Innovative studies related to the synthesis and behavior of a different class of Tc materials will increase the scientific knowledge related to development of Tc waste forms. These studies will also provide a better understanding of the behavior of {sup 99}Tc in repository conditions. A literature survey has selected promising alternative waste forms for further study: technetium metallic alloys, nitrides, oxides, sulfides, and pertechnetate salts. The goals of this project are to 1) synthesize and structurally characterize relevant technetium materials that may be considered as waste forms, 2) investigate material behavior in solution under different conditions of temperature, electrochemical potential, and radiation, and 3) predict the long-term behavior of these materials.

  19. downloadForm.asp

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DE-DT0010963 PAGE NO (a) (b) (c) (d) (e) (f) (g) DE-EM0003586/0455/15/501866/01 Period of Performance: 03/15/2016 to 03/14/2017 00001 Task 1 - LANL Land Conveyance and Transfers 121,845.38 2016 Line item value is:$121,845.38 Incrementally Funded Amount: $121,845.38 Prescribed by GSA FAR (48 CFR) 53.213(f) OPTIONAL FORM 348 (Rev. 4/2006) AUTHORIZED FOR LOCAL REPODUCTION PREVIOUS EDITION NOT USABLE TOTAL CARRIED FORWARD TO 1ST PAGE (ITEM 17(H)) $121,845.38 Contract DE-EM0003586 Task Order

  20. GlassForm

    Energy Science and Technology Software Center

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  1. Bipolar pulse forming line

    DOEpatents

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  2. 2001 Residential Energy Consumption Survey Answers to Frequently...

    Energy Information Administration (EIA) (indexed site)

    ... RoperASW is a well respected survey research firm. You will return your completed forms to ... The government may bring a civil action to prohibit reporting violations which may result ...

  3. Manufacturing Energy Consumption Survey (MECS) - U.S. Energy...

    Annual Energy Outlook

    U. S. Census Regions and Divisions: census map About the MECS Survey forms Maps MECS Terminology Archives Features First 2010 Data Press Release 2010 Data Brief Other End Use ...

  4. Nucleon Electromagnetic Form Factors

    SciTech Connect

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  5. Fermilab | Fermilab at Work | Web Form | Feedback Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Feedback Form Use the form below to submit a suggestion to senior management. Required fields are marked with an asterisk (*). Suggestion: Name: Email Address: Submit Last modified...

  6. Form 1 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Form 1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 1Legal Abstract Form 1: General Information,...

  7. HDOT Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    HDOT Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: HDOT FormsLegal Abstract The State of Hawaii Forms Central webpage...

  8. Dark Energy Survey

    SciTech Connect

    Roodman, Aaron; Nord, Brian; Elliot, Ann

    2012-12-06

    Members of the Dark Energy Survey collaboration explain what they hope to learn by studying the southern sky with the world's most advanced digital camera, mounted on a telescope in Chile.

  9. 2000 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    "NERSC has been the most stable supercomputer center in the country particularly with the migration from the T3E to the IBM SP". "Makes supercomputing easy." Below are the survey...

  10. REMS Webinar Survey

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Safety and Security Thank you for participating in the inaugural DOE REMS Webinar that was held on Tuesday, March 8 at 1:00 pm EST. Please take a moment to respond to this survey. ...

  11. Dark Energy Survey

    ScienceCinema

    Roodman, Aaron; Nord, Brian; Elliot, Ann

    2014-08-12

    Members of the Dark Energy Survey collaboration explain what they hope to learn by studying the southern sky with the world's most advanced digital camera, mounted on a telescope in Chile.

  12. Radiation Safety Work Control Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : ... Safety Office (namesignaturedate) Radiation Physics (namesignaturedate) Section 4: ...

  13. NDEP Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    to library Legal Document- OtherOther: NDEP FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) provides links various forms, including all necessary...

  14. Electronic Registration Form - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Site Wide Programs Health & Safety Exposition Electronic Registration Form About Us Booth Awards Special Events Exhibitor Information What is EXPO Electronic Registration Form...

  15. Form 200 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ApplicationPermit Application: Form 200Legal Abstract Form 200: ApplicationReport for Waste Discharge, current through August 14, 2014. Published NA Year Signed or Took Effect...

  16. Benchmarking survey for recycling.

    SciTech Connect

    Marley, Margie Charlotte; Mizner, Jack Harry

    2005-06-01

    This report describes the methodology, analysis and conclusions of a comparison survey of recycling programs at ten Department of Energy sites including Sandia National Laboratories/New Mexico (SNL/NM). The goal of the survey was to compare SNL/NM's recycling performance with that of other federal facilities, and to identify activities and programs that could be implemented at SNL/NM to improve recycling performance.

  17. 2010 Federal Employee Viewpoint Survey

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Federal Employee Viewpoint Survey Page 1 of 20 ...Department of Energy 2010 Federal Employee Viewpoint Survey: Trend Report (2006 and 2008 ...

  18. User Survey | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Survey User Survey Results The ALCF conducts yearly surveys to gain a better understanding of how we can improve the user experience at ALCF. Below are the numeric results of these surveys. 2015 ALCF User Survey Results 2014 ALCF User Survey Results 2013 ALCF User Survey Results 2012 ALCF User Survey Results 2011 ALCF User Survey Results 2010 ALCF User Survey Results 2009 ALCF User Survey Results 2008 ALCF User Survey Results

  19. Waste form product characteristics

    SciTech Connect

    Taylor, L.L.; Shikashio, R.

    1995-01-01

    The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

  20. NEPA Litigation Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    NEPA Litigation Surveys NEPA Litigation Surveys CEQ publishes surveys on NEPA litigation on an annual basis. These surveys identify the number of cases involving a NEPA based cause...

  1. STEP Utility Data Release Form

    Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  2. 2011Form EIA-902 Instructions

    Energy Information Administration (EIA) (indexed site)

    (private label owner); (3) subsidiary or business unit of overseas manufacturer; (4) U.S. ... EIA-902 survey information on the dollar value of shipments (both on a per unit and ...

  3. STEP Participant Survey Executive Summary

    Energy.gov [DOE]

    STEP Participant Survey Executive Summary, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  4. 2001 FEMP customer survey appendices

    SciTech Connect

    Hall, Nicholas P.; Reed, John H.; Talerico, Thomas P.; Riggert, Jeff; Oh, Andrew; Jordan, Gretchen

    2002-02-01

    Appendix A: Survey Instrument; Appendix B: Detailed Responses; Appendix C: Adoption and Diffusion of Innovations

  5. Fire Protection Account Request Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to...

  6. SSRL Computer Account Request Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    SSRL/LCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name: __________________________________________________________ Institution: ___________________________________________________________ Mailing Address: ______________________________________________________ Email Address: _______________________________________________________ Telephone:

  7. Fermilab | Tevatron | Guest Book | Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Guest Book - Form Share your Tevatron-related memories, comments and stories by using our submission form below: Submitted comments are restricted to 200 words and comments will be...

  8. Forms & Documents | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms & Documents Incremental Budget Request Form FY 2016 Field Work Proposal (FWP) use for WAS Field Work Proposal (FWP) Out-of-Cycle use for proposals LDRD Budget Template New ...

  9. Paperclips Etc. Special Order Form

    Energy.gov [DOE] (indexed site)

    PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply...

  10. CSLB Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLB FormsLegal Abstract The Colorado State Land Board (CSLB) provides various...

  11. ADOT Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADOT FormsLegal Abstract The Arizona Department of Transportation provides...

  12. NDSL Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    NDSL Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NDSL FormsLegal Abstract The Nevada Division of State Lands provides...

  13. CSLC Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLC FormsLegal Abstract The California State Lands Commission (CSLC) provides...

  14. WSDNR Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: WSDNR FormsLegal Abstract The Washington State Department of Natural Resources...

  15. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03142013) OSDBU Control Number: ...

  16. ESA Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search OpenEI Reference LibraryAdd to library Web Site: ESA Forms Abstract Fish and Wildlife Service Fish and Wildlife Permit Application Forms Author U.S. Fish and...

  17. Benefit Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your

  18. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  19. Document Certification and Transmittal Form

    Energy.gov [DOE]

    Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting.

  20. Solar Site Survey Toolkit

    Energy.gov [DOE]

    After a couple outings, a principal technologist at Sandia National Laboratories saw a need for a travel kit that would have the necessary tools to make the task of site surveys more manageable and safer. They have had great success using the kit in the field already.

  1. MONTHLY RADIATION SURVEY TECHNICAL BASIS

    SciTech Connect

    BROWN, R.L.

    2003-06-13

    This document details the technical basis, analysis, and justification for rescheduling radiation surveys in occupied radiation areas within Tank Farm Facilities from a weekly to a monthly frequency. The purpose of this document is to provide the technical basis, analysis, and justification for seeking a technical equivalency determination (TED) to TFRCM Article 552.1.b. The scope of this document limited to radiation surveys in occupied areas, no equivalency is being sought for high radiation area boundary surveys, radiological buffer area surveys, active ventilations surveys, or work coverage surveys.

  2. Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy...

    OpenEI (Open Energy Information) [EERE & EIA]

    Notice Form Topic Well Abandonment Report Organization State of Hawaii Commission on Water Resource Management Published Publisher Not Provided, 012008 DOI Not Provided Check...

  3. Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    must exist at the time the request is submitted. Orga nizati Pillsbury Winthrop Shaw Pi on Mailin g 909 Fannin Suite 2000 Addre 55 City Houston Enter description: 1. All...

  4. Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    completed 20 or more years of Reserve or National Guard service but will not receive a pension until age 60.) SF-181 Ethnicity and Race Identification Ethnicity and Race...

  5. ARM User Survey Report

    SciTech Connect

    Roeder, LR

    2010-06-22

    The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users’ preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

  6. Sloan digital sky survey

    SciTech Connect

    Kent, S.M.; Stoughton, C.; Newberg, H.; Loveday, J.; Petravick, D.; Gurbani, V.; Berman, E.; Sergey, G.; Lupton, R.

    1994-04-01

    The Sloan Digital Sky Survey will produce a detailed digital photometric map of half the northern sky to about 23 magnitude using a special purpose wide field 2.5 meter telescope. From this map we will select {approximately} 10{sup 6} galaxies and 10{sup 5} quasars, and obtain high resolution spectra using the same telescope. The imaging catalog will contain 10{sup 8} galaxies, a similar number of stars, and 10{sup 6} quasar candidates.

  7. Seal for fluid forming tools

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  8. Complaint Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Complaint Form Complaint Form The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. To submit an allegation to the OIG, complete the form below. Acknowledgement * I acknowledge that I have read the Office of Inspector General Hotline section of the OIG website regarding issues which should be reported to the OIG, complaint processing, anonymity and

  9. System for forming janus particles

    DOEpatents

    Hong, Liang; Jiang, Shan; Granick, Steve

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  10. Technology Transfer Reporting Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transfer Reporting Form Technology Transfer Reporting Form PDF icon Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

  11. SNL Information Repository subscription form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2015 SANDIA NATIONAL LABORATORIES HAZARDOUS WASTE INFORMATION REPOSITORY INDEX Subscription form for hard copy notices of updates Name: Address: City: State: Zip: Please check each topic for which you want to receive notices of updates. Public meeting notices Information repository updates Please mail completed form to: Anita Reiser Sandia National Laboratories PO Box 5800, MS 0729 Albuquerque NM 87185-0729

  12. Method of forming ceramic bricks

    DOEpatents

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  13. Method of forming ceramic bricks

    DOEpatents

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  14. Method of forming ceramic bricks

    DOEpatents

    Poeppel, Roger B.; Claar, Terry D.; Silkowski, Peter

    1988-09-06

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  15. Oregon Modification Application Geothermal Wells Form | Open...

    OpenEI (Open Energy Information) [EERE & EIA]

    Modification Application Geothermal Wells Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Modification Application Geothermal Wells Form Form...

  16. TEPP - Exercise Evaluation Forms | Department of Energy

    Office of Environmental Management (EM)

    TEPP - Exercise Evaluation Forms TEPP - Exercise Evaluation Forms Hazardous Materials Exercise Evaluation Forms PDF icon Exercise Evaluation Forms More Documents & Publications...

  17. Homeowner and Contractor Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Homeowner and Contractor Surveys Homeowner and Contractor Surveys Better Buildings Neighborhood Program Data and Evaluation Peer Exchange Call: Homeowner and Contractor Surveys, ...

  18. Chinese Geological Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Chinese Geological Survey Jump to: navigation, search Name: Chinese Geological Survey Place: China Sector: Geothermal energy Product: Chinese body which is involved in surveys of...

  19. Steam System Survey Guide

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1/263 Steam System Survey Guide Greg Harrell, Ph.D., P.E. DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via the U.S. Department of Energy (DOE) Information Bridge. Web site http://www.osti.gov/bridge Reports produced before January 1, 1996, may be purchased by members of the public from the following source. National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone 703-605-6000 (1-800-553-6847) TDD 703-487-4639 Fax

  20. Process to form mesostructured films

    DOEpatents

    Brinker, C. Jeffrey; Anderson, Mark T.; Ganguli, Rahul; Lu, Yunfeng

    1999-01-01

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  1. Process to form mesostructured films

    DOEpatents

    Brinker, C.J.; Anderson, M.T.; Ganguli, R.; Lu, Y.F.

    1999-01-12

    This invention comprises a method to form a family of supported films with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts. 12 figs.

  2. FermiCulture Subscription Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to ...

  3. NMOSE Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    library Legal Document- Permit ApplicationPermit Application: NMOSE FormsLegal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for...

  4. Triggered pore-forming agents

    DOEpatents

    Bayley, Hagan; Walker, Barbara J.; Chang, Chung-yu; Niblack, Brett; Panchal, Rekha

    1998-01-01

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  5. Process for forming planarized films

    DOEpatents

    Pang, Stella W.; Horn, Mark W.

    1991-01-01

    A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

  6. SSRL User Financial Account Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    07/25/16 SSRL User Financial Account Form Establish an SSRL user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities or to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of

  7. Methods of forming hardened surfaces

    DOEpatents

    Branagan, Daniel J. (Iona, ID)

    2004-07-27

    The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

  8. Radiation Safety Work Control Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely

  9. Method for forming metal contacts

    DOEpatents

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  10. Chevron, GE form Technology Alliance

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. February 3, 2014 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los

  11. Supplier Information Form | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supplier Information Form PDF icon SB_SIF_form_Rev_0110

  12. LBNL Affiliate Forms - 88-Inch Cyclotron

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Users‎ > ‎ LBNL Affiliate Forms Affiliate Forms (click here to open pdf)

  13. Utah Antidegradation Review Form | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Utah Antidegradation Review Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Utah Antidegradation Review Form Form Type ApplicationNotice Form Topic...

  14. Paperwork Reduction Act Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Paperwork Reduction Act Form Paperwork Reduction Act Form Collection Discontinuation Form Paperwork Reduction Act Form (17.93 KB) More Documents & Publications OMB83 D Discontinuance Form OMB 83 C Paperwork Reduction Act Submission (OMB 83-I)

  15. DOE - NNSA/NFO -- Request Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Forms Click the links below to view the form. Complete the form by filling-out the form fields online and ...

  16. 2014 ALCF User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Science and Technical Support This section of the survey addresses the effectiveness of ALCF support at problem resolution, including emails sent to support@alcf.anl.gov, phone ...

  17. Reflection Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    (Gritto, Et Al.) Rye Patch Area Integrated Seismic Studies At The Rye Patch Geothermal Reservoir, Nevada Reflection Survey At Rye Patch Area (Laney, 2005) Rye Patch Area Federal...

  18. IRT Surveys | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    consulting in building thermographers and thermal imaging allowing to detect energy loss and increase of energy efficiency. References: IRT Surveys1 This article is a stub....

  19. Federal Buildings Supplemental Survey -- Overview

    Energy Information Administration (EIA) (indexed site)

    Buildings The Federal Buildings Supplemental Survey 1993 provides building-level energy-related characteristics for a special sample of commercial buildings owned by the...

  20. PRELIMINARY SURVEY OF VITRO CORPORATION

    Office of Legacy Management (LM)

    status of those facilities utilized under Atomic Energy Commission (AEC) contract during ... A survey of the site was conducted, consisting of gamma-ray exposure rate measurements ...

  1. Method of forming structural heliostat

    DOEpatents

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  2. PROCESS OF FORMING POWDERED MATERIAL

    DOEpatents

    Glatter, J.; Schaner, B.E.

    1961-07-14

    A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

  3. Methods of forming boron nitride

    SciTech Connect

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  4. Substrate system for spray forming

    DOEpatents

    Chu, Men G.; Chernicoff, William P.

    2002-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  5. Substrate system for spray forming

    DOEpatents

    Chu, Men G.; Chernicoff, William P.

    2000-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  6. Mapping the Heavens: Probing Cosmology with Large Surveys

    ScienceCinema

    Frieman, Joshua [Fermilab

    2016-07-12

    This talk will provide an overview of recent and on-going sky surveys, focusing on their implications for cosmology. I will place particular emphasis on the Sloan Digital Sky Survey, the most ambitious mapping of the Universe yet undertaken, showing a virtual fly-through of the survey that reveals the large-scale structure of the galaxy distribution. Recent measurements of this large-scale structure, in combination with observations of the cosmic microwave background, have provided independent evidence for a Universe dominated by dark matter and dark energy as well as insights into how galaxies and larger-scale structures formed. Future planned surveys will build on these foundations to probe the history of the cosmic expansion--and thereby the dark energy--with greater precision.

  7. 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources

    SciTech Connect

    Sturgeon, Richard W.

    2012-06-27

    organized. The RMUS Interview Form with the attached RMUS Process Form(s) provides the radioactive materials survey data by technical area (TA) and building number. The survey data for each release point includes information such as: exhaust stack identification number, room number, radioactive material source type (i.e., potential source or future potential source of air emissions), radionuclide, usage (in curies) and usage basis, physical state (gas, liquid, particulate, solid, or custom), release fraction (from Appendix D to 40 CFR 61, Subpart H), and process descriptions. In addition, the interview form also calculates emissions (in curies), lists mrem/Ci factors, calculates PEDEs, and states the location of the critical receptor for that release point. [The critical receptor is the maximum exposed off-site member of the public, specific to each individual facility.] Each of these data fields is described in this section. The Tier classification of release points, which was first introduced with the 1999 usage survey, is also described in detail in this section. Section 4 includes a brief discussion of the dose estimate methodology, and includes a discussion of several release points of particular interest in the CY 2011 usage survey report. It also includes a table of the calculated PEDEs for each release point at its critical receptor. Section 5 describes ES's approach to Quality Assurance (QA) for the usage survey. Satisfactory completion of the survey requires that team members responsible for Rad-NESHAP (National Emissions Standard for Hazardous Air Pollutants) compliance accurately collect and process several types of information, including radioactive materials usage data, process information, and supporting information. They must also perform and document the QA reviews outlined in Section 5.2.6 (Process Verification and Peer Review) of ES-RN, 'Quality Assurance Project Plan for the Rad-NESHAP Compliance Project' to verify that all information is complete and

  8. An intelligent inspection and survey robot

    SciTech Connect

    Byrd, J.S.

    1995-10-01

    Large quantities of mixed and low-level radioactive waste contained in 55-, 85-, and 110-gallon steel drums are stored at Department of Energy (DOE) warehouses located throughout the United States. The steel drums are placed on pallets and stacked on top of one another, forming a column of drums ranging in heights of one to four drums and up to 16 feet high. The columns of drums are aligned in rows forming an aisle approximately three feet wide between the rows of drums. Tens of thousands of drums are stored in these warehouses throughout the DOE complex. ARIES (Autonomous Robotic Inspection Experimental System) is under development for the DOE to survey and inspect these drums. The robot will navigate through the aisles and perform an inspection operation, typically performed by a human operator, making decisions about the condition of the drums and maintaining a data of pertinent information about each drum.

  9. Triggered pore-forming agents

    DOEpatents

    Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

    1998-07-07

    An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

  10. Spin-forming Project Report

    SciTech Connect

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  11. ExRep_form.indd

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Report Submit all experiment reports using this fillable pdf form and upload the saved file using the LANSCE proposals Websi After logging in, click the "Upload Experiment Report" link in the proposal actions view table. Local contact Flight path/instrument Proposal number Title Authors and Affiliations Experiment report

  12. Process for forming sulfuric acid

    DOEpatents

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  13. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Form 4220.2 (Revised January 2014) Office of Small and Disadvantaged Business Utilization Small Business Review OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract:

  14. Natural gas annual 1992: Supplement: Company profiles

    SciTech Connect

    Not Available

    1994-01-01

    The data for the Natural Gas Annual 1991 Supplement : Company Profiles are taken from Form EIA-176, (open quotes) Annual Report of Natural and Supplemental Gas Supply and Disposition (close quotes). Other sources include industry literature and corporate annual reports to shareholders. The companies appearing in this report are major interstate natural gas pipeline companies, large distribution companies, or combination companies with both pipeline and distribution operations. The report contains profiles of 45 corporate families. The profiles describe briefly each company, where it operates, and any important issues that the company faces. The purpose of this report is to show the movement of natural gas through the various States served by the 45 large companies profiled.

  15. 2015

    Energy Information Administration (EIA) (indexed site)

    6 11.7 44.2 83.7 12.9 46.8 83.8 13.8 46.1 83.4 14.4 46.2 85.1 14.3 46.6 84.9 0 10 20 30 40 50 60 70 80 90 100 Residential Commercial Industrial 2011 2012 2013 2014 2015 Note: These deliveries included quantities covered by long-term contracts and gas involved in short-term or spot market sales. Source: Energy Information Administration (EIA), Form EIA -176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." Figure 18. Percent of natural gas deliveries in the United

  16. 2017 Levelized Costs AEO 2012 Early Release

    Gasoline and Diesel Fuel Update

    6 11.7 44.2 83.7 12.9 46.8 83.8 13.8 46.1 83.4 14.4 46.2 85.1 14.3 46.6 84.9 0 10 20 30 40 50 60 70 80 90 100 Residential Commercial Industrial 2011 2012 2013 2014 2015 Note: These deliveries included quantities covered by long-term contracts and gas involved in short-term or spot market sales. Source: Energy Information Administration (EIA), Form EIA -176, "Annual Report of Natural and Supplemental Gas Supply and Disposition." Figure 18. Percent of natural gas deliveries in the United

  17. Security Review Processing Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Security Review Processing Form Security Review Processing Form Security Review Process - Please review carefully. Security Acknowledge Form - Complete and return immediately. ...

  18. Types of Possible Survey Errors in Estimates Published in the Weekly Natural Gas Storage Report

    Weekly Natural Gas Storage Report

    U.S. Energy Information Administration | Types of Possible Survey Errors in Estimates Published in the Weekly Natural Gas Storage Report 1 February 2016 Types of Possible Survey Errors in Estimates Published in the Weekly Natural Gas Storage Report The U.S. Energy Information Administration (EIA) collects and publishes natural gas storage information on a monthly and weekly basis. The Form EIA-191, Monthly Underground Natural Gas Storage Report, is a census survey that collects field-level

  19. FORM EIA-23L ANNUAL SURVEY OF DOMESTIC OIL AND GAS RESERVES

    Gasoline and Diesel Fuel Update

    ... actual production or conclusive formation test (drill stem or wire line), or if economic ... actual production or conclusive formation test (drill stem or wire line), or if economic ...

  20. Forms | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms Forms The following are the official Y-12 forms needed by the public. Forms are provided in one or more of three formats: PDF fillable, Word, and HTML. Select a category to...

  1. Method of forming calthrate ice

    DOEpatents

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  2. Method of forming clathrate ice

    DOEpatents

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  3. Unsplit bipolar pulse forming line

    DOEpatents

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  4. Method of forming a joint

    DOEpatents

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  5. Chevron, GE form Technology Alliance

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Chevron, GE form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology Alliance, which will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. The Alliance builds upon a current collaboration on flow analysis technology for oil and gas wells. It will leverage research and development from GE's newest Global Research Center,

  6. Disclosure of Lobbying Activities Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Approved by OMB 0348-0046 Disclosure of Lobbying Activities Complete this form to disclose lobbying activities pursuant to 31 U.S.C. 1352 (See reverse for public burden disclosure) | Type of Federal Action: a. contract ____ b. grant c. cooperative agreement d. loan e. loan guarantee f. loan insurance | Status of Federal Action: a. bid/offer/application _____ b. initial award c. post-award | Report Type: a. initial filing _____ b. material change | |Name and Address of Reporting Entity: ____

  7. Rib forming tool for tubing

    DOEpatents

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  8. Geophex Airborne Unmanned Survey System

    SciTech Connect

    Won, I.J.; Keiswetter, D.

    1995-10-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide {open_quotes}stand-off{close_quotes} capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits rapid geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected.

  9. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  10. Rapid Freeform Sheet Metal Forming

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vij Kiridena, Ford Motor Company U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. June 14, 2016 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Develop a transformational RApid Freeform sheet metal Forming Technology (RAFFT) to deliver:  A sheet metal parts (up to 2.0 m x 1.5 m)  Dimensional accuracy (± 1.0 mm) & surface finish (Ra < 30 µm)  3-day art to part total time

  11. DOE Form 1332.4

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 DOE F 243.2 Records Scheduling Request DOE F 243 2 Records Scheduling Request Form (1).pdf (335.35 KB) More Documents & Publications DOE F 243.5 Electronic Recordkeeping System Questionnaire Records Management Handbook Records Management Handbook Energy

    5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire.pdf (69.34 KB) More Documents & Publications DOE F 243.5

  12. RadBudgForm.revised

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    RADIATION BUDGET FORM PAGE NUM/REV 1/- Fill in blanks or (preferably) provide in tab-separated or Excel/WKS format. Hall (circle one): A B C experiment num.: _______________ drawing num. supplied: _______________ name of liaison: _________________________ run hours (100% effect.) days* 0.0 setup number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 beam energy GeV beam current uA(CW) mean polarization % exp/target ID number exp't target material (1) exp't target thickness (1) mg/cm2 exp't target

  13. FORMING PROTECTIVE FILMS ON METAL

    DOEpatents

    Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

    1958-12-16

    Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

  14. Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

    SciTech Connect

    Enertech Consultants

    1996-04-01

    The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

  15. Integrally formed radio frequency quadrupole

    DOEpatents

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  16. 2014 Manufacturing Energy Consumption Survey

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    U S C E N S U S B U R E A U 2014 Manufacturing Energy Consumption Survey Sponsored by the Energy Information Administration U.S. Department of Energy Administered and Compiled by ...

  17. Geodetic Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    At Kilauea Summit Area (Keller, Et Al., 1979) Kilauea Summit Area Results Of An Experimental Drill Hole At The Summit Of Kilauea Volcano, Hawaii Geodetic Survey At Long Valley...

  18. 2014 LMR Survey2.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    2014. The goal of the survey is to assess the overall perceived effectiveness of LMR programs and to find potential target areas for improvement. The survey is comprised of 19 questions. Of these, 12 are subjective with the multiple choice answers: Strongly Agree, Agree, Neutral, Disagree, and Strongly Disagree. 3 questions ask for descriptive answers, such as giving the frequency of LMR meetings during a specific time frame. The final 4 questions are open-ended. With the exception of the

  19. Geophex Airborne Unmanned Survey System

    SciTech Connect

    Won, I.L.; Keiswetter, D.

    1995-12-31

    Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results.

  20. Sample Employee Survey for Workplace Charging Planning

    Energy.gov [DOE] (indexed site)

    WORKPLACE CHARGING CHALLENGE Sample Employee Survey for Workplace Charging Planning ... Your responses to this survey will be used to determine employee interest in this benefit. ...

  1. Idaho Geological Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    The Idaho Geological Survey is located in Boise, Idaho. About Information on past oil and gas exploration wells in Idaho was transferred to the Idaho Geological Survey in...

  2. Category:Telluric Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Pages in category "Telluric Survey" This category contains only the following page. T Telluric Survey Retrieved from "http:en.openei.orgwindex.php?titleCategory:Telluric...

  3. radiological. survey | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    survey NNSA to Conduct Aerial Radiological Surveys Over San Francisco, Pacifica, Berkeley, And Oakland, CA Areas A U.S. Department of Energy National Nuclear Security...

  4. 2008/2009 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Next 20082009 User Survey Results Table of Contents Response Survey Respondent Demographics Overall Satisfaction and Importance All Satisfaction and Importance Ratings...

  5. Aftertreatment Research Prioritization: A CLEERS Industrial Survey...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Research Prioritization: A CLEERS Industrial Survey Aftertreatment Research Prioritization: A CLEERS Industrial Survey Presentation given at the 2007 Diesel Engine-Efficiency & ...

  6. Alumina forming iron base superalloy

    DOEpatents

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  7. Miscellaneous Waste-Form FEPs

    SciTech Connect

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  8. CFCNCA Sample Pledge Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CFCNCA Sample Pledge Form CFCNCA Sample Pledge Form This file contains a sample pledge form and instructions for completing a paper donation through the CFC. CFCNCA Fall 2012 Sample Pledge Form.pdf (151.39 KB) More Documents & Publications CFCNCA Sample Pledge Form 2012 CFCNCA Catalog of Caring DOE F 3630.1 Rights and Benefits of Reservists Called to Active Duty

  9. Two Forms of Identification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms of Identification Two Forms of Identification Two Forms of Identification (95.07 KB) More Documents & Publications Self-Identification of Disability LNG Exports by Truck out of the U.S. Form LNG Imports by Truck into the U.S. Form

  10. Form W-9 (Rev. October 2007)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Give form to the requester. Do not send to the IRS. Form W-9 Request for Taxpayer ... Date General Instructions Form W-9 (Rev. 10-2007) Part I Part II Business ...

  11. Postdoctoral Initial Discussion Form | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Initial Discussion Form This form outlines initial goals and clarifies expectations between a postdoc and his/her supervisor for a successful and productive relationship. Microsoft Office document icon Postdoctoral Initial Discussion Form.doc

  12. DEQ UPDES Forms Website | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    UPDES Forms Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DEQ UPDES Forms Website Abstract A website containing forms and guidance for...

  13. Employee Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Form Employee Information Form New Employee Information Form (103.85 KB) More Documents & Publications TEE-0074 - In the Matter of GE Appliances & Lighting CX-007131: Categorical Exclusion Determination CX-007148: Categorical Exclusion Determination

  14. Capital Equipment Validation Form | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Capital Equipment Validation Form Version Number: 2.0 Document Number: Form 48100.001 Effective Date: 02/2015 File (public): Office spreadsheet icon form_48100.001_rev2.xls

  15. Form:EZFeed Policy | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Help Apps Datasets Community Login | Sign Up Search Form Edit History Form:EZFeed Policy Jump to: navigation, search This is the 'EZFeed Policy' form. To add a page with this...

  16. THE ELM SURVEY. III. A SUCCESSFUL TARGETED SURVEY FOR EXTREMELY LOW MASS WHITE DWARFS

    SciTech Connect

    Brown, Warren R.; Kenyon, Scott J.; Kilic, Mukremin; Allende Prieto, Carlos E-mail: skenyon@cfa.harvard.edu E-mail: callende@iac.es

    2012-01-10

    Extremely low mass (ELM) white dwarfs (WDs) with masses < 0.25 M{sub Sun} are rare objects that result from compact binary evolution. Here, we present a targeted spectroscopic survey of ELM WD candidates selected by color. The survey is 71% complete and has uncovered 18 new ELM WDs. Of the seven ELM WDs with follow-up observations, six are short-period binaries and four have merger times less than 5 Gyr. The most intriguing object, J1741+6526, likely has either a pulsar companion or a massive WD companion making the system a possible supernova Type Ia or an Ia progenitor. The overall ELM survey has now identified 19 double degenerate binaries with <10 Gyr merger times. The significant absence of short orbital period ELM WDs at cool temperatures suggests that common envelope evolution creates ELM WDs directly in short period systems. At least one-third of the merging systems are halo objects, thus ELM WD binaries continue to form and merge in both the disk and the halo.

  17. Survey of ceramic machining in Japan

    SciTech Connect

    Bandyopadhyay, B.P.; Blau, P.J.

    1993-07-01

    This report is a compilation of four subcontract reports provided by B. P. Bandyopadhyay who, while a visiting professor at Toyohashi University in Japan, conducted a survey of ceramic machining technology in that country from January 1 through December 31, 1992. Various aspects of machining technology were surveyed: types of parts being produced, types of ceramic materials being used, the nature of current ceramic machining research and development, and types of machine tools. The four separate reports compiled here were originally provided in a narrative, chronological form, and some of the information has been reorganized into topical areas for this compilation. This report is organized into three sections: The first describes ten ceramic machining research and development organizations and provides a reference list of their current technical publications; the second, two major trade shows; and the third, several other products and commercial developments noted during the course of Bandyopadhyay`s stay in Japan. An Appendix lists key individuals who are currently conducting ceramic machining research in Japan.

  18. Research Form | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Research Form Research Form Students may arrange to receive credit andor choose to receive points toward the PARCI-CARES certificate through research in a faculty-supervised...

  19. 2015 Housing Innovation Awards Application Form | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Housing Innovation Awards Application Form 2015 Housing Innovation Awards Application Form ... The 2015 ceremony will take place at the EEBA Excellence in Building Conference & Expo ...

  20. Pulse Pressure Forming of Lightweight Materials, Development...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forming of Lightweight Materials, Development of High Strength Superplastic Al Sheet, Friction Stir Spot Welding of Advanced High Strength Steels Pulse Pressure Forming of...

  1. Alten Energias Renovables Sociedad Limitada formly Solpark |...

    OpenEI (Open Energy Information) [EERE & EIA]

    Alten Energias Renovables Sociedad Limitada formly Solpark Jump to: navigation, search Name: Alten Energias Renovables Sociedad Limitada (formly Solpark) Place: Bilbao, Spain...

  2. DOE Forms National Center for Photovoltaics

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  3. CDC DOGGR Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    CDC DOGGR FormsLegal Abstract The California Department of Conservation (CDC) Division of Oil, Gas & Geothermal Resources (DOGGR) provides various forms and information related to...

  4. Form EIA-860 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    LibraryAdd to library Form: Form EIA-860 Abstract The U.S. Energy Information Administration (EIA) requires certain developers of electric generating plants (meeting certain...

  5. CDOT Applications and Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    to library Legal Document- OtherOther: CDOT Applications and FormsLegal Abstract The California Department of Transportation (CDOT) provides various applications and forms,...

  6. New Species of Cyanobacteria Forms Intracellular Carbonates

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates New Species of Cyanobacteria Forms Intracellular Carbonates Print Wednesday, 30 January 2013 00:00 A new species of ...

  7. DOE Forms Management FAQ's | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services » Forms » DOE Forms Management FAQ's DOE Forms Management FAQ's Facts.jpg What types of forms are there? Departmental Form: for use department-wide by DOE personnel only Headquarters (HQ) Form: developed or managed by a DOE Headquarters organization and generally for use by HQ or within an HQ element Local Form: for use within a specific DOE Field Office Optional Form: developed by a Federal agency for use by two or more agencies, or non-mandatory Government-wide use and approved by

  8. Form 2C | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Application: Form 2CLegal Abstract Form 2C: Application for Permit to Discharge Wastewater - Existing Industrial Facilities, current through August 14, 2014. Published NA...

  9. Form 2B | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Application: Form 2BLegal Abstract Form 2B: Application for Permit to Discharge Wastewater from Concentrated Animal Feeding Operations and Aquatic Animal Production...

  10. California Water Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for California Water Forms Citation California Water Forms(2009). Retrieved from...

  11. Arizona Department of Environmental Quality's Application Forms...

    OpenEI (Open Energy Information) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  12. The NERSC Allocation Request Form (ERCAP)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    via a web form known as the ERCAP (Energy Research Computing Allocations Process) Request Form. ERCAP is accessed through the NERSC Information Management (NIM) web interface ...

  13. Mentee Profile Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Mentee Profile Form (241.46 KB) More Documents & Publications Mentor Profile Form Tools for the Mentor Tools for the Mentee Benefits Executive Resources Learning and Workforce ...

  14. REMS Webinar Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    REMS Webinar Survey REMS Webinar Survey Survey for the inaugural DOE REMS Webinar that was held on Tuesday, March 8, 2016 at 1:00 pm EST. REMS Webinar Survey (606.08 KB) More Documents & Publications Radiation Exposure Monitoring Systems Data Submittal Notification EERE's Usability and Analysis Techniques Guidebook Annual DOE Occupational Radiation Exposure | 2012 Report

  15. 2001 FEMP Customer Survey Report (Appendices)

    Energy.gov [DOE]

    Appendix A: Survey Instrument; Appendix B: Detailed Responses; Appendix C: Adoption and Diffusion of Innovations

  16. Residential Energy Consumption Survey: Quality Profile

    SciTech Connect

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  17. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1992-09-15

    To establish Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of insite security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE 5634.1A. Canceled by DOE O 470.1 dated 9-28-95.

  18. Facility Approvals, Security Surveys, and Nuclear Materials Surveys

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1988-02-03

    To establish the Department of Energy (DOE) requirements for granting facility approvals prior to permitting safeguards and security interests on the premises and the conduct of on-site security and/or nuclear material surveys of facilities with safeguards and security interests. Cancels DOE O 5630.7 and DOE O 5634.1. Canceled by DOE 5634.1B.

  19. 2001 FEMP Customer Survey Appendices

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Appendices A Report Prepared for the US Department of Energy February 2002 By TecMRKT Works and Sandia National Laboratories TecMRKT Works Nicholas P. Hall John H. Reed Ph.D Thomas P. Talerico Jeff Riggert Andrew Oh And Sandia National Laboratories Gretchen Jordan FEMP Customer Survey Appendices Table of Contents Table of Contents TABLE OF CONTENTS I LIST OF FIGURES II LIST OF TABLES III APPENDIX A: SURVEY INSTRUMENT 1 APPENDIX B: DETAILED REPONSES 42 1. Participant and Nonparticipant Profiles

  20. ARM - Ingest Supporting Tools and Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Ingest Supporting Tools and Forms

  1. Delta Dental Claim Form | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Delta Dental Claim Form PDF icon 2010_DeltaDental_claimform

  2. Closeout Forms: Patent Certification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Closeout Forms: Patent Certification Closeout Forms: Patent Certification Closeout forms for the financial opportunities process. Patent Certification (DOE F2050.11) (71 KB) Patent Certification Instructions and Example (66.93 KB) More Documents & Publications DOE F 2050.11 C:\Forms\DOE F 2050.11.cdr Patent Certification

  3. Direct Deposit Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Direct Deposit Form Direct Deposit Form Direct Deposit Form (66.61 KB) More Documents & Publications Employee In-Processing Forms Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program

  4. AASG State Geological Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    AASG State Geological Survey AASG State Geological Survey presentation at the April 2013 peer review meeting held in Denver, Colorado.Contributions to the NGDSAASG State Geological Survey aasg__geo_survey_peer2013.pdf (2.44 MB) More Documents & Publications State Geological Survey Contributions to the National Geothermal Data System National Geothermal Data System Architecture Design, Testing and Maintenance National Geothermal Data Systems Data Acquisition and Access

  5. Federal Employee Viewpoint Survey | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Policy and Guidance » Human Capital Management » Federal Employee Viewpoint Survey Federal Employee Viewpoint Survey The Federal Employee Viewpoint Survey (FedView survey) is a tool that measures employees' perceptions of whether, and to what extent, conditions characterizing successful organizations are present in their agencies. Survey results provide valuable insight into the challenges agency leaders face in ensuring the Federal Government has an effective civilian workforce and how well

  6. Extension of Chern-Simons forms

    SciTech Connect

    Konitopoulos, Spyros; Savvidy, George

    2014-06-15

    We investigate metric independent, gauge invariant, and closed forms in the generalized Yang-Mills (YM) theory. These forms are polynomial on the corresponding fields strength tensors curvature forms and are analogous to the Pontryagin-Chern densities in the YM gauge theory. The corresponding secondary characteristic classes have been expressed in integral form in analogy with the Chern-Simons form. Because they are not unique, the secondary forms can be dramatically simplified by the addition of properly chosen differentials of one-step-lower-order forms. Their gauge variation can also be found yielding the potential anomalies in the gauge field theory.

  7. Sample Forms | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Sample Forms U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Sample Forms The below completed example forms contain "dummy" data for information purposes. For current up to date blank forms please go to the DOE/NRC forms link located on the NMMSS information page. Sample 740s DOE/NRC Form 740M Sample 742s and 742Cs 742 Example 1 Example 1A Example 2 Example 3 Example 3A Example 4 DOE/NRC Form 742 742C Example 1 Example

  8. Radiation Survey Instrument Training (retrain only) AL-157 | The Ames

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Laboratory Radiation Survey Instrument Training (retrain only) AL-157 Event Type: Training Date: 11/16/2016 - 15:00 Location: 140 TASF This course is for radiation producing device users who have successfully completed the retrain exam for AL-076. If you are completing your radiation producing device user training for the first time, you will receive an email from Mike McGuigan, our Radiation Safety Officer, which will include forms to fill out and return. Once your forms have been received,

  9. THE STRUCTURAL EVOLUTION OF FORMING AND EARLY STAGE STAR CLUSTERS

    SciTech Connect

    Jaehnig, Karl O.; Da Rio, Nicola; Tan, Jonathan C. E-mail: ndario@ufl.edu

    2015-01-10

    We study the degree of angular substructure in the stellar position distribution of young members of Galactic star-forming regions, looking for correlations with distance from cluster center, surface number density of stars, and local dynamical age. To this end we adopt the catalog of members in 18 young (?1-3Myr) clusters from the Massive Young Star-Forming Complex Study in Infrared and X-ray Survey and the statistical analysis of the angular dispersion parameter, ?{sub ADP,} {sub N}. We find statistically significant correlation between ?{sub ADP,} {sub N} and physical projected distance from the center of the clusters, with the centers appearing smoother than the outskirts, consistent with more rapid dynamical processing on local dynamical, free-fall or orbital timescales. Similarly, smoother distributions are seen in regions of higher surface density, or older dynamical ages. These results indicate that dynamical processing that erases substructure is already well-advanced in young, sometimes still-forming, clusters. Such observations of the dissipation of substructure have the potential to constrain theoretical models of the dynamical evolution of young and forming clusters.

  10. ORPS User Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    User Registration Form ORPS User Registration Form September 1, 2015 Operational Event Information Systems Registration Form For Occurrence Reporting and Processing System ORPS User Registration Form (486.14 KB) More Documents & Publications ORPS Facility Registration Form Occurrence Reporting and Processing System (ORPS) - PISA: TRU Waste Drums Containing Treated Nitrate Salts May Challenge the Safety Analysis Microsoft Word - CHAP02ESH _REVISED1_3.doc

  11. Forming the Future | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forming the Future Forming the Future This feature article from the April 2014 edition of the Fabricating and Forming Journal (FFJournal) describes how Ford Motor Co.'s sheet metal freeforming technology accelerates prototyping, taking stamping tool costs and lead time out of the equation. Reprinted with permission of FFJournal Forming the Future, FFJournal (April 2014) (863.4 KB) More Documents & Publications RAPID FREEFORM SHEET METAL FORMING: TECHNOLOGY DEVELOPMENT AND SYSTEM VERIFICATION

  12. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    DOEpatents

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  13. Hazards Survey and Hazards Assessments

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1997-08-21

    This volume is to assist DOE Operations/Field Offices and operating contractors in complying with the DOE O 151.1 requirement that Hazards Surveys and facility-specific Hazards Assessments be prepared, maintained, and used for emergency planning purposes. Canceled by DOE G 151.1-2.

  14. Telluric Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    form of large, dynamic sheets. Similarly to the magnetotelluric method, the source of the signal is naturally occurring particle interactions in the ionosphere primarily due to...

  15. 2015 Uranium Marketing Annual Survey

    Energy Information Administration (EIA) (indexed site)

    5 2015 Uranium Marketing Annual Report Release Date: May 24, 2016 Next Release Date: May ... Source: U.S. Energy Information Administration, Form EIA-858 "Uranium Marketing Annual ...

  16. Paperclips Supply Store Forms | Department of Energy

    Energy.gov [DOE] (indexed site)

    Catalog Order Form for Non-Stocked or Specialty Items For any non-stocked or special item that needs to be ordered, the Catalog Order Form (pdf) needs to be filled in. All supplies...

  17. Form W-8 BEN (Rev. February 2014)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    W-8BEN (Rev. February 2014) Department of the Treasury Internal Revenue Service ... Entities must use Form W-8BEN-E. Information about Form W-8BEN and its separate ...

  18. Sources: Energy Information Administration, Form EIA-182,

    Energy Information Administration (EIA) (indexed site)

    "Domestic Crude Oil First Purchase Report"; Form EIA-856, "Monthly Foreign Crude Oil Acquisition Report"; and Form EIA-14, "Refiners' Monthly Cost Report." 0 6 12 18 24 30 J F M A...

  19. Texas GLO Coastal Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Coastal Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Texas GLO Coastal FormsLegal Abstract The Texas General Land Office...

  20. TCEQ Water Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: TCEQ Water FormsLegal Abstract The Texas Commission on Environmental...

  1. ADEQ Water Quality Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ADEQ Water Quality Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADEQ Water Quality FormsLegal Abstract The Arizona...

  2. ADNR Water Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ADNR Water Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADNR Water FormsLegal Abstract The Alaska Department of Natural...

  3. 2011 Form EIA-63A Instructions

    Gasoline and Diesel Fuel Update

    U. S. DEPARTMENT OF ENERGY Form Approved U.S. ENERGY INFORMATION ADMINISTRATION OMB No. 1905-0196 Washington, DC 20585 Expires: 12312013 FORM EIA-63A ANNUAL SOLAR THERMAL ...

  4. Form:Buildings Publication | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsPublication&oldid270103...

  5. Form:Buildings Model | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    with that name already exists, you will be sent to a form to edit that page. Create or edit Retrieved from "http:en.openei.orgwindex.php?titleForm:BuildingsModel&oldid270041...

  6. CSLB ROW Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    various forms and information related to surface Rights of Way on or across state trust lands. Published NA Year Signed or Took Effect 2014 Legal Citation CSLB ROW Forms DOI...

  7. Form 2D | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    D Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 2DLegal Abstract Form 2D: Application for Permit to...

  8. EIA - 2008 New Electric Power Forms

    Energy Information Administration (EIA) (indexed site)

    industry. figure showing what electricity forms merge into the new forms Click for more information on the New EIA-860 Click for more information on the New EIA-923 Resources to ...

  9. Fermilab at Work | Manuals and Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Policy Guide Engineering Manual Engineering Manual Engineering Manual Appendices Risk Assessment Spreadsheet Engineering Manual Rollout Teamcenter Rollout Facilities Request Form...

  10. CONFIGURATION CHANGE PROPOSAL FORM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CONFIGURATION CHANGE PROPOSAL FORM CONFIGURATION CHANGE PROPOSAL FORM This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. (40.5 KB) More Documents &

  11. SWS Variance Request Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    SWS Variance Request Form SWS Variance Request Form As Grantees update and revise their field standards to align with the SWS, they may discover certain specifications that cannot be implemented precisely as described in the relevant SWS. In such cases, Grantees may request a variance from the relevant SWS. To be granted a variance, the attached request form must be completed in full. Complete one form for each variance requested, which may on occasion include more than one SWS. For example,

  12. EEO Intake Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EEO Intake Form EEO Intake Form Download and fill out this form to start the process for Equal Employment Opportunity complaints at the Department of Energy. For more information about the EEO process, visit this site. To get in touch with our Office of Civil Rights, call (202) 586-2218. DOE EEO Intake Form 2016 (395.3 KB) More Documents & Publications Equal Employment Opportunity Intake Process DOE F 1600.2 DOE F 1600.1

  13. CAIRS Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    More Documents & Publications ORPS User Registration Form Headquarters Facilities Master Security Plan - Chapter 13, Controlled Unclassified Information Fire Protection System ...

  14. Rural electric cooperatives IRP survey

    SciTech Connect

    Garrick, C.

    1995-11-01

    This report summarizes the integrated resource planning (IRP) practices of US rural electric cooperatives and the IRP policies which influence these practices. It was prepared by the National Renewable Energy Laboratory (NREL) and its subcontractor Garrick and Associates to assist the US Department of Energy (DOE) in satisfying the reporting requirements of Title 1, Subtitle B, Section 111(e)(3) of the Energy Policy Act of 1992 (EPAct), which states: (e) Report--Not later than 2 years after the date of the enactment of this Act, the Secretary (of the US Department of Energy) shall transmit a report to the President and to the Congress containing--(the findings from several surveys and evaluations, including:); (3) a survey of practices and policies under which electric cooperatives prepare IRPs, submit such plans to REA, and the extent to which such integrated resource planning is reflected in rates charged to customers.

  15. Opinion of Counsel Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Opinion of Counsel Form Opinion of Counsel Form For use with natural gas authorization filings Opinion of Counsel Form - Natural Gas Regulation (7.1 KB) More Documents & Publications Listing of DOE/FE Authorizations Issued in 2013 Listing of DOE/FE Authorizations Issued in 2014 Clean Energy - FE Dkt No. 14-54-LNG (FTA)

  16. Microsoft Word - EMBOSSING REQUEST FORM4611.doc

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    EMBOSSING REQUEST FORM Please read attached sheet before completing this form Personal Contact Information Date: ____/____/_____ Name: ___________________________ Phone #: _________________ Department: __________ PRN or Acct #: _____________________ E-mail: _____________________________ Technical Information Please use separate forms for requests involving different mold inserts or embossing materials. Mold Insert Name: ___________________________________________________________ Mold Insert

  17. Wind energy: An engineering survey

    SciTech Connect

    Nahas, M.N.; Mohamad, A.S.; Akyurt, M.; El-Kalay, A.K.

    1987-01-01

    This paper presents an extensive survey of literature about wind energy and wind machines, their design and their applications. The paper intends to provide those who plan for energy policy with thorough information about this renewable type of energy and the available machines that convert wind energy into useful mechanical or electrical work. The machines which are available at present range from the simple Savonius rotor to the powerful multi-blade windmills. The advantages and shortcomings of all types are discussed here.

  18. "Speak Up" Survey Results - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    in the survey. The goal is to use the results to continuously improve Hanford's safety culture and work environment. Results for the "Speak Up" Survey An Organizational Climate and...

  19. Utah Geological Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Logo: Utah Geological Survey Name: Utah Geological Survey Address: 1594 W. North Temple Place: Salt Lake City, Utah Zip: 84114-6100 Phone Number: 801.537.3300 Website:...

  20. Types of Possible Survey Errors in Estimates Published in the Weekly

    Weekly Natural Gas Storage Report

    Natural Gas Storage Report Types of Possible Survey Errors in Estimates Published in the Weekly Natural Gas Storage Report Release date: March 1, 2016 The U.S. Energy Information Administration (EIA) collects and publishes natural gas storage information on a monthly and weekly basis. The Form EIA-191, Monthly Underground Natural Gas Storage Report, is a census survey that collects field-level information from all underground natural gas storage operators in the United States known to EIA.

  1. STEP Non-Participant Survey Report

    Energy.gov [DOE]

    STEP Non-Participant Survey Report, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  2. Nonresidential-building energy-consumption survey, 1979. Final report, Part II and Part III

    SciTech Connect

    Not Available

    1981-06-01

    The Utility Survey component of the Nonresidential Building Energy Consumption Survey was designed to provide data on the quantity and costs of energy consumed during 1979 by each building represented in the Building Survey data. To this end, 13,386 consumption and cost reporting forms were mailed to 1509 companies/organizations/agencies who supplied some type of energy to the 6222 buildings represented in the data from the earlier Building Survey. Part II, Section 2 discusses the step-by-step process of building the computer and manual files that were needed in order to conduct the Utility Survey. How the files were actually used in order to implement, control, and manage the Utility Survey was also discussed. Section 3 discusses the reporting forms and the accompanying instructional material used to collect data from the energy suppliers and Section 4 discusses the various operations for implementing the data collection task. The proessing of the data is described in Section 5 and the method of keeping the data confidential is described in Section 6. Part III, Section 7 presents several analyses of the costs associated with the Interim Nonresidential Building Energy Consumption Survey. Tables included reflect costs incurred through April 25, 1981. Administrative correspondence, record sheets, and explanatory notes are included in appendices. (MCW)

  3. Department of Energy Earned Value Management Survey Results ...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Earned Value Management Survey Results Department of Energy Earned Value Management Survey Results Humphreys & Associates, Inc. (H&A) conducted a survey of ...

  4. Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah Gamma Survey of a Permeable Reactive Barrier at Monticello, Utah Gamma Survey of a Permeable Reactive Barrier at...

  5. 2015 Readers' Survey: Tell us what you think!

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    online survey no later than Friday, June 19, 2015, by clicking on the survey link below: 2015 Readers' Survey Thank you Your responses will be kept completely confidential

  6. Category:Static Temperature Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Static Temperature Survey Jump to: navigation, search Geothermalpower.jpg Looking for the Static Temperature Survey page? For detailed information on Static Temperature Survey,...

  7. Survey of the Economics of Hydrogen Technologies | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Survey of the Economics of Hydrogen Technologies Survey of the Economics of Hydrogen Technologies Survey of the Economics of Hydrogen Technologies PDF icon 27079.pdf More Documents ...

  8. State Geological Survey Contributions to the National Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    North Dakota Geological Survey New Hampshire Geological Survey New Jersey Geological Survey New Mexico Bureau of Geology & Mineral Resources Nevada Bureau of Mines & Geology New ...

  9. Headquarters Facilities Master Security Plan - Chapter 7, Surveys...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7, Surveys and Reviews Headquarters Facilities Master Security Plan - Chapter 7, Surveys and Reviews 2016 Headquarters Facilities Master Security Plan - Chapter 7, Surveys and ...

  10. Housing characteristics, 1987: Residential Energy Consumption Survey

    SciTech Connect

    Not Available

    1989-05-26

    This report is the first of a series of reports based on data from the 1987 RECS. The 1987 RECS is the seventh in the series of national surveys of households and their energy suppliers. These surveys provide baseline information on how households in the United States use energy. A cross section of housing types such as single-family detached homes, townhouses, large and small apartment buildings, condominiums, and mobile homes were included in the survey. Data from the RECS and a companion survey, the Residential Transportation Energy Consumption Survey (RTECS), are available to the public in published reports such as this one and on public use tapes. 10 figs., 69 tabs.

  11. Site survey method and apparatus

    DOEpatents

    Oldham, James G.; Spencer, Charles R.; Begley, Carl L.; Meyer, H. Robert

    1991-06-18

    The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment.

  12. Site survey method and apparatus

    DOEpatents

    Oldham, J.G.; Spencer, C.R.; Begley, C.L.; Meyer, H.R.

    1991-06-18

    The disclosure of the invention is directed to a site survey ground vehicle based apparatus and method for automatically detecting source materials, such as radioactivity, marking the location of the source materials, such as with paint, and mapping the location of the source materials on a site. The apparatus of the invention is also useful for collecting and analyzing samples. The apparatus includes a ground vehicle, detectors mounted at the front of the ground vehicle, and individual detector supports which follow somewhat irregular terrain to allow consistent and accurate detection, and autolocation equipment. 19 figures.

  13. Supplier Information Form Date: New Revision

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Supplier Information Form Date: New Revision Interested suppliers may complete and submit a Supplier Information Form to be included into LANS' vendor database. Suppliers are advised that there is no guarantee any solicitations or awards will be sent to Supplier by submitting a Supplier Information Form; however, in the event a solicitation is sent to the Supplier from an LANS Procurement Official, then a more formal quotation/offer may be required. Legal Business Name: D/B/A: (if applicable)

  14. Prescriptive Path compliance form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Prescriptive Path compliance form Prescriptive Path compliance form This Prescriptive Path compliance form shall be submitted to: doechallengehome@newportpartnersllc.com challenge_home_prescriptive_compliance_5-12.docx (20.98 KB) More Documents & Publications Version Tracking Document for DOE Challenge Homes, National Program Requirements (Rev. 03) DOE Zero Energy Ready Home National Program Requirements (Rev. 04) Washington DOE ZERH Program Requirements

  15. Microsoft Word - JLFTourForm.docx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Jupiter Laser Facility Tour Request Form Host Name/Organization Extension Pager Administrative Support Email Extension Name of Group or Affiliation Tour Date Tour Time Number of Guests Tour Guide Special Needs Purpose of JLF Tour Name (one name per box) Company/Affiliation Country of Citizenship Signature Email completed form to JLF Administrator, Beth Mariotti at mariotti2@llnl.gov or fax to 925-422-6907. Approved by: Approved Date Approval Signature Submit Form to JLF Administrator

  16. Internship Form | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Internship Form Internship Form Students may arrange to receive credit and choose to receive points toward the PARC/I-CARES certificate through an unpaid internship or an internship with a modest stipend. Credit will not be awarded for paid internships. The student is expected to pursue studies or outside activities that are supervised by a faculty advisor or sponsor. Washington University schools and departments require their own separate internship forms to be completed by students seeking

  17. Helicopter magnetic survey conducted to locate wells

    SciTech Connect

    Veloski, G.A.; Hammack, R.W.; Stamp, V.; Hall, R.; Colina, K.

    2008-07-01

    A helicopter magnetic survey was conducted in August 2007 over 15.6 sq mi at the Naval Petroleum Reserve No. 3s (NPR-3) Teapot Dome Field near Casper, Wyoming. The surveys purpose was to accurately locate wells drilled there during more than 90 years of continuous oilfield operation. The survey was conducted at low altitude and with closely spaced flight lines to improve the detection of wells with weak magnetic response and to increase the resolution of closely spaced wells. The survey was in preparation for a planned CO2 flood for EOR, which requires a complete well inventory with accurate locations for all existing wells. The magnetic survey was intended to locate wells missing from the well database and to provide accurate locations for all wells. The ability of the helicopter magnetic survey to accurately locate wells was accomplished by comparing airborne well picks with well locations from an intense ground search of a small test area.

  18. Shallow (2-meter) temperature surveys in Colorado

    DOE Data Explorer

    Zehner, Richard E.

    2012-02-01

    Citation Information: Originator: Geothermal Development Associates, Reno, Nevada Publication Date: 2012 Title: Colorado 2m Survey Edition: First Publication Information: Publication Place: Reno Nevada Publisher: Geothermal Development Associates, Reno, Nevada Description: Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh et al. (2007) and Sladek et al. (2007), and are summarized here. The survey method was devised to measure temperature as far below the zone of solar influence as possible, have minimal equilibration time, and yet be portable enough to fit on the back of an all-terrain vehicle (ATV); Figure 2). This method utilizes a direct push technology (DPT) technique where 2.3 m long, 0.54” outer diameter hollow steel rods are pounded into the ground using a demolition hammer. Resistance temperature devices (RTD) are then inserted into the rods at 2-meter depths, and allowed to equilibrate for one hour. The temperatures are then measured and recorded, the rods pulled out of the ground, and re-used at future sites. Usually multiple rods are planted over the course of an hour, and then the sampler returns back to the first station, measures the temperatures, pulls the rods, and so on, to eliminate waiting time. At Wagon Wheel Gap, 32 rods were planted around the hot springs between June 20 and July 1, 2012. The purpose was to determine the direction of a possible upflow fault or other structure. Temperatures at 1.5m and 2m depths were measured and recorded in the attribute table of this point shapefile. Several anomalous temperatures suggest that outflow is coming from a ~N60W striking fault or shear zone that contains the quartz-fluorite-barite veins of the adjacent patented mining claims. It should be noted that temperatures at 2m

  19. New Species of Cyanobacteria Forms Intracellular Carbonates

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    rather than external precipitates, cells may not have been entombed within mineral shells, and so calcified cyanobacteria microfossils may not have formed, explaining the...

  20. Electronic Comment Form | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Office of General Counsel National Environmental Policy Act (NEPA) NEPA Reading Room Draft Site-Wide Environmental Impact Statement Nevada Electronic Comment Form...

  1. Course Form | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Course Form Course Form Students may take courses selected by PARC/I-CARES, and receive points toward the certificate. By signing this form, the student acknowledges that he/she has taken the course, and has earned the appropriate grade (i.e., B- or better in a 100-200 level course; C or better in a 300-400 level course). PARC/I-CARES will verify the student's coursework below with the registrar's office. Please complete and submit the following form for final approval. To identify your Course

  2. NDEP 401 WQ Forms | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Legal Document- OtherOther: NDEP 401 WQ FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) Bureau of Water Quality Planning (BWQP) provides links to...

  3. New Species of Cyanobacteria Forms Intracellular Carbonates

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Species of Cyanobacteria Forms Intracellular Carbonates Print A new species of cyanobacteria-photosynthetic bacteria that occupy a wide array of habitats-was discovered in the...

  4. FormCampusMachineShopsLabs.doc

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Highway Baton Rouge, Louisiana 70806 225-578-8887 225-578-6954 (Fax) Form for Campus Machine Shops and Labs Purchaser's Name Phone ...

  5. Employee Concerns Reporting Form | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Management and Budget Human Resources Employee Concerns Program How Do You Report A Concern? Employee Concerns Reporting Form Employee Concerns Program Policy Statement DOE...

  6. Project Information Form for Usability Projects | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    it to the Web Governance Team facilitator. File Project Information Form - Usability More Documents & Publications EERE's Usability and Analysis Techniques Guidebook Web Content ...

  7. Form:RRSection | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    source History View New Pages Recent Changes All Special Pages Semantic SearchQuerying Get Involved Help Apps Datasets Community Login | Sign Up Search Form Edit History...

  8. ODEQ - Construction Stormwater Application and Forms Manual ...

    OpenEI (Open Energy Information) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermitting...

  9. Soliton form factors from lattice simulations

    SciTech Connect

    Rajantie, Arttu; Weir, David J.

    2010-12-01

    The form factor provides a convenient way to describe properties of topological solitons in the full quantum theory, when semiclassical concepts are not applicable. It is demonstrated that the form factor can be calculated numerically using lattice Monte Carlo simulations. The approach is very general and can be applied to essentially any type of soliton. The technique is illustrated by calculating the kink form factor near the critical point in 1+1-dimensional scalar field theory. As expected from universality arguments, the result agrees with the exactly calculable scaling form factor of the two-dimensional Ising model.

  10. Form EIA-860 Instructions | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    plants with instructions on completing Form EIA-860. The U.S. Energy Information Administration (EIA) requires certain developers of electric generating plants (meeting defined...

  11. Miscellaneous Forms | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Miscellaneous Forms Miscellaneous Forms The following miscellaneous forms are provided in PDF fillable and/or Word format. Click the link in the "Format" column to open a copy of the form or right-click to download. Number* Title/Description Format** SF-85 Questionnaire for Non-Sensitive Positions PDF-fil UCN-13A Relocation Expense Report PDF-fil, PDF print UCN-15436 Gifts and Grants Request PDF-fil, Word UCN-16708 Request for Authorization to Ship SNM or Non-SNM Material (U) Word

  12. Form W-8BEN (Rev. February 2006)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service Certificate of Foreign Status of Beneficial Owner for United States Tax Withholding See...

  13. LANSCE Training Office Process Improvement Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Training Office Process Improvement Form You recently contacted our training service department. We want to assure that you're satisfied with our service. Please complete this ...

  14. Process for forming transparent aerogel insulating arrays

    SciTech Connect

    Tewari, P.H.; Hunt, A.J.

    1986-09-09

    This patent describes a drying process for forming transparent aerogel insulating arrays of the type utilizing the steps of hydrolyzing and condensing alkoxides to form alcogels, and subsequently removing the alcohol therefrom to form aerogels, the improvement comprising the additional step, after alcogels are formed, of substituting a solvent having a critical temperature less than the critical temperature of the alcohol for the alcohol in the alcogels, and drying the resulting gels at a supercritical temperature for the solvent, to thereby provide a transparent aerogel array within a substantially reduced drying time period.

  15. ProForm | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Spreadsheet ComplexityEase of Use: Simple Website: poet.lbl.govProform Cost: Free References: ProForm1 Related Tools General Equilibrium Modeling Package (GEMPACK)...

  16. New Employee Forms | The Ames Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    New Employee Forms All new employees and non-salaried associates must complete the New Employee Check In Packet to begin work at the Ames Laboratory. To expedite the check in process, you may print off the forms below and bring the completed forms to the Human Resources Office on your first day of work. New employees or returning employees (returning to work after a break in pay) will need to complete the ISU Payroll Packet. The Form I-9, Federal Work Authorization, must be completed on or

  17. Microsoft Word - ProjectProposalForm.dotx

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    If yes, who? Please attach a list of collaborators and students, if any, from whom we can expect exposure request forms for this...

  18. Better Buildings Residential Network Membership Form | Department...

    Energy.gov [DOE] (indexed site)

    of Energy's Better Buildings Residential Network. BBRN Membership Form (138.55 KB) More Documents & Publications Better Buildings Residential Network Orientation Fact Sheet: ...

  19. Secondary Waste Forms and Technetium Management

    Office of Environmental Management (EM)

    Secondary Waste Forms and Technetium Management Joseph H. Westsik, Jr. Pacific Northwest ... liquid effluents under the Dangerous Waste Permit for disposal at the Integrated ...

  20. Comparative repository performance of plutonium forms - initial...

    Office of Scientific and Technical Information (OSTI)

    Title: Comparative repository performance of plutonium forms - initial studies The disposition of excess weapons plutonium may result in high-level radioactive waste streams ...

  1. Form EIA-923 Mock-Ups

    Gasoline and Diesel Fuel Update

    Hours: 2.3 FORM EIA-923 POWER PLANT OPERATIONS REPORT ... purchase received for the use of electricity generation. ... COMPANY SADIE SAFETY CLEAN SALT RIVER PROJECT SAMPSON COAL ...

  2. Form 2E | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Application for Facilities that do not Discharge Process Wastewaters, current through August 14, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation Form 2E:...

  3. Deployment of ITS: A Summary of the 2010 National Survey Results

    SciTech Connect

    Gordon, Stephen Reed; Trombly, Jeff

    2011-08-01

    This report presents summary results of the 2010 ITS Deployment Tracking survey, the most recent survey conducted by the ITS Deployment Tracking Project. The U.S. Department of Transportation and its member agencies, including the Research and Innovative Technology Administration, have pursued a research and development agenda, the Intelligent Transportation System (ITS) Program, designed to integrate the latest in information technologies to improve the safety, mobility, and reliability of surface transportation modes. Within metropolitan areas, implementation of these advanced technologies has been accomplished by a variety of state and local transportation and emergency management agencies as well as the private sector. In order to measure the rate of ITS deployment within the nation s largest metropolitan areas, the ITS Deployment Tracking Project has conducted a nationwide survey of state and local transportation and emergency management agencies nearly every year since 1997. The results presented in this report are intended to be a summary of the entire database from the 2010 survey. Access to the complete survey results and previous national surveys are available on-line at http://www.itsdeployment.its.dot.gov. The website also provides access to survey results in the form of downloadable reports, including a survey summary for each survey type and fact sheets. Nearly 1,600 surveys were distributed to state and local transportation agencies in 2010. A total of seven (7) survey types were distributed including: Freeway Management, Arterial Management, Transit Management, Transportation Management Center (TMC), Electronic Toll Collection (ETC), Public Safety Law Enforcement, and Public Safety Fire/Rescue. Among other things, the data collection results indicate that ITS has moved from being experimental to mainstream and interest in continuing investments in ITS continues to be very strong. When asked about future deployment plans, one-third to three

  4. Wellbore inertial directional surveying system

    DOEpatents

    Andreas, Ronald D.; Heck, G. Michael; Kohler, Stewart M.; Watts, Alfred C.

    1991-01-01

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single off-shore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on the electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block aboutthe gimbal axis. Angular rates of the sensor block about axes which are perpendicular to the gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and anular rate information. Kalman estimation techniques are used to compensate for system errors.

  5. Wellbore inertial directional surveying system

    DOEpatents

    Andreas, R.D.; Heck, G.M.; Kohler, S.M.; Watts, A.C.

    1982-09-08

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single offshore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on an electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block about the gimbal axis. Angular rates of the sensor block about axes which are perpendicular to te gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and angular rate information. Kalman estimation techniques are used to compensate for system errors. 25 figures.

  6. Method for hot press forming articles

    DOEpatents

    Baker, Robert R.; Hartsock, Dale L.

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  7. Deformation and Forming of Joined Materials

    SciTech Connect

    Carsley, John; Hovanski, Yuri; Clarke, Kester D.; Krajewski, Paul E.

    2014-09-23

    Introductory article to a set of invited papers from the TMS committee on shaping and forming. This paper introduces a set of papers that were prepared to discussing the deformation and forming of joined materials, and to announce an upcoming symposium at the 2015 MS&T meeting in Columbus Ohio.

  8. ACOUSTIC FORMING FOR ENHANCED DEWATERING AND FORMATION

    SciTech Connect

    Cyrus K Aidun

    2007-11-30

    The next generation of forming elements based on acoustic excitation to increase drainage and enhances formation both with on-line control and profiling capabilities has been investigated in this project. The system can be designed and optimized based on the fundamental experimental and computational analysis and investigation of acoustic waves in a fiber suspension flow and interaction with the forming wire.

  9. Methods for forming long subsurface heaters

    DOEpatents

    Kim, Dong Sub

    2013-09-17

    A method for forming a longitudinal subsurface heater includes longitudinally welding an electrically conductive sheath of an insulated conductor heater along at least one longitudinal strip of metal. The longitudinal strip is formed into a tubular around the insulated conductor heater with the insulated conductor heater welded along the inside surface of the tubular.

  10. Composite materials formed with anchored nanostructures

    SciTech Connect

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  11. Method for forming porous platinum films

    DOEpatents

    Maya, Leon

    2000-01-01

    A method for forming a platinum film includes providing a substrate, sputtering a crystalline platinum oxide layer over at least a portion of the substrate, and reducing the crystalline platinum oxide layer to form the platinum film. A device includes a non-conductive substrate and a platinum layer having a density of between about 2 and 5 g/cm.sup.3 formed over at least a portion of the non-conductive substrate. The platinum films produced in accordance with the present invention provide porous films suitable for use as electrodes, yet require few processing steps. Thus, such films are less costly. Such films may be formed on both conductive and non-conductive substrates. While the invention has been illustrated with platinum, other metals, such as noble metals, that form a low density oxide when reactively sputtered may also be used.

  12. New Employee Orientation - Forms Checklist | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms Checklist New Employee Orientation - Forms Checklist Listing of the forms to be ... NEO - Forms Checklist (379.74 KB) More Documents & Publications New Employee Orientation - ...

  13. Residential Energy Consumption Survey (RECS) - Analysis & Projections -

    Energy Information Administration (EIA) (indexed site)

    U.S. Energy Information Administration (EIA) About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports Has your home been selected for the RECS? State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data

  14. Residential Energy Consumption Survey (RECS) - U.S. Energy Information

    Gasoline and Diesel Fuel Update

    Administration (EIA) About the RECS RECS Survey Forms RECS Maps RECS Terminology Archived Reports Has your home been selected for the RECS? State fact sheets Arizona household graph See state fact sheets › 2009 RECS Features Heating and cooling no longer majority of U.S. home energy use March 7, 2013 Newer U.S. homes are 30% larger but consume about as much energy as older homes February 12, 2013 Where does RECS square footage data come from? July 11, 2012 RECS data show decreased energy

  15. Slab edge insulating form system and methods

    DOEpatents

    Lee, Brain E.; Barsun, Stephan K.; Bourne, Richard C.; Hoeschele, Marc A.; Springer, David A.

    2009-10-06

    A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

  16. SSRL/LCLS User Account Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    REVISED 08/13/12 CJK SSRL/LCLS User Account Form To open or renew an account, complete and submit this form along with an original Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated expenditures (the suggested minimum is $1,000). Send this form with the Purchase Order to: Jackie Kerlegan SLAC National Accelerator Laboratory User Research Administration, MS 99 2575 Sand Hill Rd. Menlo Park, CA 94025 FAX:

  17. Plasma formed ion beam projection lithography system

    DOEpatents

    Leung, Ka-Ngo; Lee, Yung-Hee Yvette; Ngo, Vinh; Zahir, Nastaran

    2002-01-01

    A plasma-formed ion-beam projection lithography (IPL) system eliminates the acceleration stage between the ion source and stencil mask of a conventional IPL system. Instead a much thicker mask is used as a beam forming or extraction electrode, positioned next to the plasma in the ion source. Thus the entire beam forming electrode or mask is illuminated uniformly with the source plasma. The extracted beam passes through an acceleration and reduction stage onto the resist coated wafer. Low energy ions, about 30 eV, pass through the mask, minimizing heating, scattering, and sputtering.

  18. Low temperature waste form process intensification

    SciTech Connect

    Fox, K. M.; Cozzi, A. D.; Hansen, E. K.; Hill, K. A.

    2015-09-30

    This study successfully demonstrated process intensification of low temperature waste form production. Modifications were made to the dry blend composition to enable a 50% increase in waste concentration, thus allowing for a significant reduction in disposal volume and associated costs. Properties measurements showed that the advanced waste form can be produced using existing equipment and processes. Performance of the waste form was equivalent or better than the current baseline, with approximately double the amount of waste incorporation. The results demonstrate the feasibility of significantly accelerating low level waste immobilization missions across the DOE complex and at environmental remediation sites worldwide.

  19. Instructions For Completing Certified Payroll Report Form

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Wage and Hour Division (WHD) Instructions For Completing Payroll Form, WH-347 * OMB Control No. 1235-0008, Expires 02/28/2018. General: Form WH-347has been made available for the convenience of contractors and subcontractors required by their Federal or Federally-aided construction-type contracts and subcontracts to submit weekly payrolls. Properly filled out, this form will satisfy the requirements of Regulations, Parts 3 and 5 (29 C.F.R., Subtitle A), as to payrolls submitted in connection

  20. radiological survey | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    radiological survey San Francisco Bay Area Aerial Radiation Assessment Survey (SAN JOSE and SAN FRANCISCO, California) - A helicopter may be seen flying at low altitudes over portions of the San Francisco Bay Area from January 29 through February 6, 2016. The purpose of the flyovers is to measure naturally occurring background radiation. Officials from the National Nuclear... NNSA to Conduct Aerial Radiological Surveys Over Washington, D.C. and Baltimore, MD Areas WASHINGTON, D.C. AND BALTIMORE,

  1. Sample Employee Survey for Workplace Charging Planning

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sample Employee Survey for Workplace Charging Planning Plug-in electric vehicles (PEVs) use electricity as either their primary fuel or to improve fuel efficiency. Today, over 25 PEV models are available, expanding driver options. We are considering the installation of charging infrastructure to assist employees who drive PEVs to work. Your responses to this survey will be used to determine employee interest in this benefit. Participation in this survey is voluntary and you do not need to

  2. Methods of forming semiconductor devices and devices formed using such methods

    DOEpatents

    Fox, Robert V; Rodriguez, Rene G; Pak, Joshua

    2013-05-21

    Single source precursors are subjected to carbon dioxide to form particles of material. The carbon dioxide may be in a supercritical state. Single source precursors also may be subjected to supercritical fluids other than supercritical carbon dioxide to form particles of material. The methods may be used to form nanoparticles. In some embodiments, the methods are used to form chalcopyrite materials. Devices such as, for example, semiconductor devices may be fabricated that include such particles. Methods of forming semiconductor devices include subjecting single source precursors to carbon dioxide to form particles of semiconductor material, and establishing electrical contact between the particles and an electrode.

  3. DC Survey 2013 | National Nuclear Security Administration | ...

    National Nuclear Security Administration (NNSA)

    management system NNSA emergency response assets highlighted NNSA displays helicopter in Baltimore NNSA to Conduct Aerial Radiation Monitoring Survey over Boston April 17-20

  4. Aeromagnetic Survey (Nannini, 1986) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    These surveys are based on the magnetic susceptibility contrast between magmatic rocks at depth and the sedimentary formations above. References Raffaello Nannini (1986)...

  5. Ground Gravity Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Et Al., 2000) Dixie Valley Geothermal Area 1999 2000 Precise Gravimetry and Geothermal Reservoir Management Ground Gravity Survey At Dixie Valley Geothermal Area (Blackwell, Et...

  6. Aeromagnetic Survey And Interpretation, Ascention Island, South...

    OpenEI (Open Energy Information) [EERE & EIA]

    And Interpretation, Ascention Island, South Atlantic Ocean Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Aeromagnetic Survey And...

  7. 2009 Annual Employee Survey Results for

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    9 Annual Employee Survey Results for Department of Energy All Respondents 1) ... This is an area that the agency will be closely reviewing following the 2010 Employee ...

  8. Geothermal resistivity resource evaluation survey Waunita Hot...

    OpenEI (Open Energy Information) [EERE & EIA]

    resistivity resource evaluation survey Waunita Hot Springs project, Gunnison County, Colorado Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Geothermal...

  9. Federal Buildings Supplemental Survey - Index Page

    Energy Information Administration (EIA) (indexed site)

    Buildings 1993 Federal Buildings Supplemental Survey Overview Full Report Tables Energy usage and energy costs, by building characteristics, for federally-owned buildings in...

  10. PRELIMINARY SURVEY OF WESTINGHOUSE ELECTRIC CORPORATION EAST...

    Office of Legacy Management (LM)

    From information obtained in discussions during the survey, the area utilized was apparently cleaned, and tools and equipment were decontaminated and subsequently sealed in drums ...

  11. Commercial Grade Dedication Survey and Training | Department...

    Office of Environmental Management (EM)

    More Documents & Publications Commercial Grade Dedication Survey and Training EM Commercial Grade Dedication Class Slides NQA-1 Commercial Grade Dedication Critical Characteristics

  12. Residential Energy Consumption Survey (RECS) - Analysis & Projections...

    Gasoline and Diesel Fuel Update

    EIA has conducted the Residential Energy Consumption Survey (RECS) since 1978 to provide data on home energy characteristics, end uses of energy, and expenses for the four Census ...

  13. Wyoming State Geological Survey | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    navigation, search Name: Wyoming State Geological Survey Abbreviation: WSGS Address: P.O. Box 1347 Place: Laramie, Wyoming Zip: 82073 Year Founded: 1933 Phone Number:...

  14. 2007/2008 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    all six DOE Science Offices and a variety of home institutions: see Respondent Demographics. The survey responses provide feedback about every aspect of NERSC's operation,...

  15. 2009/2010 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Next 20092010 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction All Satisfaction and Importance Ratings HPC Resources NERSC...

  16. 2010/2011 User Survey Results

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Next 20102011 User Survey Results Table of Contents Response Summary Respondent Demographics Score Legend Satisfaction and Importance Scores HPC Resources Software Services...

  17. ENG Form 4345 Application | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ENG Form 4345 ApplicationLegal Published NA Year Signed or Took Effect 2013 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  18. Nanoeletromechanical switch and logic circuits formed therefrom

    SciTech Connect

    Nordquist, Christopher D.; Czaplewski, David A.

    2010-05-18

    A nanoelectromechanical (NEM) switch is formed on a substrate with a source electrode containing a suspended electrically-conductive beam which is anchored to the substrate at each end. This beam, which can be formed of ruthenium, bows laterally in response to a voltage applied between a pair of gate electrodes and the source electrode to form an electrical connection between the source electrode and a drain electrode located near a midpoint of the beam. Another pair of gate electrodes and another drain electrode can be located on an opposite side of the beam to allow for switching in an opposite direction. The NEM switch can be used to form digital logic circuits including NAND gates, NOR gates, programmable logic gates, and SRAM and DRAM memory cells which can be used in place of conventional CMOS circuits, or in combination therewith.

  19. Form W-8BEN (Rev. February 2006)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Form W-8BEN (Rev. February 2006) Department of the Treasury Internal Revenue Service ... trust (see instructions for exceptions) W-8ECI or W-8IMY A foreign government, ...

  20. Method for forming polymerized microfluidic devices (Patent)...

    Office of Scientific and Technical Information (OSTI)

    Patent: Method for forming polymerized microfluidic devices Citation Details In-Document ... DOE Contract Number: AC04-94AL85000 Resource Type: Patent Research Org: SNL-A (Sandia ...

  1. RRC Form W-14 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    W-14 Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: RRC Form W-14 Published RRC, Date Not Provided DOI Not Provided Check for DOI availability:...

  2. RRC Form H-11 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: RRC Form H-11 Published RRC, 1984 DOI Not Provided Check for DOI availability: http:crossref.org...

  3. Sample Form DOE NRC 740M

    National Nuclear Security Administration (NNSA)

    CONCISE NOTE DOENRC FORM 740M (6-2008) MANDATORY DATA COLLECTION AUTHORIZED BY 10 CFR 30, ... 4. REPORTING PERIOD FROM TO 5. TRANSACTION DATA 6. REPORTING DATE A. SHIPPER'S RIS B. ...

  4. Laser based micro forming and assembly.

    SciTech Connect

    MacCallum, Danny O'Neill; Wong, Chung-Nin Channy; Knorovsky, Gerald Albert; Steyskal, Michele D.; Lehecka, Tom; Scherzinger, William Mark; Palmer, Jeremy Andrew

    2006-11-01

    It has been shown that thermal energy imparted to a metallic substrate by laser heating induces a transient temperature gradient through the thickness of the sample. In favorable conditions of laser fluence and absorptivity, the resulting inhomogeneous thermal strain leads to a measurable permanent deflection. This project established parameters for laser micro forming of thin materials that are relevant to MESA generation weapon system components and confirmed methods for producing micrometer displacements with repeatable bend direction and magnitude. Precise micro forming vectors were realized through computational finite element analysis (FEA) of laser-induced transient heating that indicated the optimal combination of laser heat input relative to the material being heated and its thermal mass. Precise laser micro forming was demonstrated in two practical manufacturing operations of importance to the DOE complex: micrometer gap adjustments of precious metal alloy contacts and forming of meso scale cones.

  5. Next Steps: New Hire Offer Letter, Forms

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contact (505) 667-4451, Option 5 Email When a job offer is made You will ... I-9 form, bring documents from the list of acceptable documents (pdf), page 9. Employees are ...

  6. Elevated temperature forming method and preheater apparatus

    DOEpatents

    Krajewski, Paul E; Hammar, Richard Harry; Singh, Jugraj; Cedar, Dennis; Friedman, Peter A; Luo, Yingbing

    2013-06-11

    An elevated temperature forming system in which a sheet metal workpiece is provided in a first stage position of a multi-stage pre-heater, is heated to a first stage temperature lower than a desired pre-heat temperature, is moved to a final stage position where it is heated to a desired final stage temperature, is transferred to a forming press, and is formed by the forming press. The preheater includes upper and lower platens that transfer heat into workpieces disposed between the platens. A shim spaces the upper platen from the lower platen by a distance greater than a thickness of the workpieces to be heated by the platens and less than a distance at which the upper platen would require an undesirably high input of energy to effectively heat the workpiece without being pressed into contact with the workpiece.

  7. First Name Last Name EMPLOYEE INFORMATION FORM

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Name Last Name EMPLOYEE INFORMATION FORM Date of Birth SSN Married Not Married Male Female ... PRIOR FEDERAL SERVICE To be Completed by Employee NSN 7540-00-634-4101 Previous Edition ...

  8. Front contact solar cell with formed emitter

    SciTech Connect

    Cousins, Peter John

    2014-11-04

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  9. Assessment of Preferred Depleted Uranium Disposal Forms

    SciTech Connect

    Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

    2000-06-01

    The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

  10. Method for forming or bonding a liner

    DOEpatents

    Prevender, Thomas S.

    1980-01-01

    A process and means for forming or bonding a liner to a shell or element wherein the liner is filled with or immersed in water and a portion of the water is frozen.

  11. Front contact solar cell with formed emitter

    DOEpatents

    Cousins, Peter John

    2012-07-17

    A bipolar solar cell includes a backside junction formed by an N-type silicon substrate and a P-type polysilicon emitter formed on the backside of the solar cell. An antireflection layer may be formed on a textured front surface of the silicon substrate. A negative polarity metal contact on the front side of the solar cell makes an electrical connection to the substrate, while a positive polarity metal contact on the backside of the solar cell makes an electrical connection to the polysilicon emitter. An external electrical circuit may be connected to the negative and positive metal contacts to be powered by the solar cell. The positive polarity metal contact may form an infrared reflecting layer with an underlying dielectric layer for increased solar radiation collection.

  12. Form:Tool | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Tool (Redirected from Form:Software Tool) Jump to: navigation, search Input your tool name below to add to the registry. If the tool is already in the registry, you will be able to...

  13. Program Evaluation: Checklists, Forms, and Guides

    Energy.gov [DOE]

    This section of the site provides for you in one place and ready to print current EERE evaluation guides, checklists for doing an evaluation, and forms to collect such things as statements of...

  14. MDF Form and Function (Text Version)

    Energy.gov [DOE]

    This is a text version of the Manufacturing Demonstration Facilities (MDF) Form and Function video, originally presented on March 12, 2012 at the MDF Workshop held in Chicago, Illinois.

  15. Microsoft Word - Metrology Req form411.doc

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    CAMD Metrology Request Form ( Scanning Electron Microscopy, Optical Profilometry,) Personal Contact Information : Date: ____/____/______ Name:______________________________ Phone #: ________________________ Department:______________ Project Reference #:____________________________ E-mail: _________________________________ Substrate Description* 1. Sample Name ______________________________ 2. Substrate Material ___________________________ 3. Material of Top Layer: ______________________________

  16. Die singulation method and package formed thereby

    DOEpatents

    Anderson, Robert C.; Shul, Randy J.; Clews, Peggy J.; Baker, Michael S.; De Boer, Maarten P.

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  17. Employee Assistance Self-ID Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Conditions can be temporary (e.g., a broken leg, on chemotherapy drugs, or pregnancy) or permanent (e.g., a hearing loss, an amputated limb, asthma). Completion of this form is ...

  18. Categorical Exclusion (CX) Determination Form | Department of...

    Energy Saver

    It also features an electronic means to submit categorical exclusion determinations for web posting. CXD-Form-2011Ver2.pdf (971.24 KB) More Documents & Publications CX-008030: ...

  19. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  20. Development of a system for survey of radon concentration of the Dayton area using a liquid scintillation counter and analysis of the data. Master's thesis

    SciTech Connect

    Kim, T.

    1992-03-01

    A system to do a large scale survey was developed. The data obtained from the survey was analyzed using a database. The database incorporated an equation for converting cpm into radon concentration (pCi/1). The equation of conversion, protocol for measuring radon concentration, survey form, and a database program were modified (from previous theses) or developed for this thesis. The elution time constant, adsorption time constant, and calibration factor were calculated for equation of conversion. Two surveys were during the course of the thesis. On the first survey, the arithmetic average radon concentration with standard error of the mean was 2.9 + 0.5 pCi/1. The geometric mean (G.M.) was 1.5 pCi/1 with geometric standard deviation of 2.7 pCi/1. There were 85 samples taken during the first survey. On the second survey, with 156 samples The arithmetic average and std. deviation was 3.8 + 0.3 pCi/l. The G.M. was 3.8 pCi/l with geometric std. deviation of 2.2 pCi/1. The second survey was done during winter using a modified survey form. The results from both surveys indicated a log-normal distribution. The system is in process of begin certified by the EPA. The system is ready to be used for larger scale survey.

  1. Security Forms and Information | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Employee Orientation » Security Forms and Information Security Forms and Information Homeland Security Presidential Directive HSPD-12 established new policy for a common identification standard for Federal Employees and contractors. As of October 27, 2005, all new Federal employees assigned to the DOE Headquarters complex are required to present two identity source documents (i.e., U.S. Passport, driver's license, identification card with photograph issued by a Federal, state, or local

  2. Benefits Forms and Information | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Employee Orientation » Benefits Forms and Information Benefits Forms and Information As a Federal employee, you may have the opportunity to participate in a number of employee benefit and family-friendly programs. If your appointment to Federal employment confers eligibility, you may elect to participate in health, dental, and life insurance programs; retirement savings plans; flexible spending accounts; long-term care insurance; and vacation and sick leave. In addition, there are a number

  3. Security Forms | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Security Forms U.S. Department of Energy / U.S. Nuclear Regulatory Commission Nuclear Materials Management & Safeguards System Security Forms Federal Information Processing Standards Publications (FIPS PUBS) FIPS-Associated Documents FIPS 140-2 Security Requirements for Cryptograhic Modules FIPS 185 Escrowed Encryption Standard (EES) FIPS 186-2 Digital Signature Standard (DSS) From Microsoft From VeriSign Managing Contacts' Digital Certificates with Netscape Communicator Managing Contacts'

  4. Forms & Applications | Stanford Synchrotron Radiation Lightsource

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer

  5. Proton form factor effects in hydrogenic atoms

    SciTech Connect

    Daza, F. Garcia; Kelkar, N. G.; Nowakowski, M.

    2011-10-21

    The proton structure corrections to the hyperfine splittings in electronic and muonic hydrogen are evaluated using the Breit potential with electromagnetic form factors. In contrast to other methods, the Breit equation with q{sup 2} dependent form factors is just an extension of the standard Breit equation which gives the hyperfine splitting Hamiltonian. Precise QED corrections are comparable to the structure corrections which therefore need to be evaluated ab initio.

  6. SEPARATIONS AND WASTE FORMS CAMPAIGN IMPLEMENTATION PLAN

    SciTech Connect

    Vienna, John D.; Todd, Terry A.; Peterson, Mary E.

    2012-11-26

    This Separations and Waste Forms Campaign Implementation Plan provides summary level detail describing how the Campaign will achieve the objectives set-forth by the Fuel Cycle Reasearch and Development (FCRD) Program. This implementation plan will be maintained as a living document and will be updated as needed in response to changes or progress in separations and waste forms research and the FCRD Program priorities.

  7. Method for forming cooperative binary ionic solids

    DOEpatents

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2014-09-09

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  8. Method for forming cooperative binary ionic solids

    DOEpatents

    Shelnutt, John A.; Martin, Kathleen E.; Wang, Zhongchun; Medforth, Craig J.

    2013-03-05

    A nanostructured molecular unit and method for forming is described where a cationic porphyrin having an ethanolic substituent species and a metal in the porphyrin cavity is combined with an anionic porphyrin having a sulfonate substituent species and a metal in the porphyrin cavity to form by self-assembly a nanostructured molecular unit with a morphology comprising four dendritic elements connected at a central node.

  9. Method of forming a chemical composition

    DOEpatents

    Bingham, Dennis N.; Wilding, Bruce M.; Klingler, Kerry M.; Zollinger, William T.; Wendt, Kraig M.

    2007-10-09

    A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

  10. What Makes Clouds Form, Grow and Die?

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Makes Clouds Form, Grow and Die? What Makes Clouds Form, Grow and Die? Simulations Show Raindrops Physics May Affect Climate Model Accuracy February 19, 2015 thunderstorm Brazil shuttle NASA 1984 540 PNNL scientists used real-world observations to simulate how small clouds are likely to stay shallow, while larger clouds grow deeper because they mix with less dry air. Pictured are small and large thunderstorms growing over southern Brazil, taken from the space shuttle. Image: NASA Johnson Space

  11. Multiagency radiation survey and site investigation manual (MARSSIM): Overview/Update

    SciTech Connect

    Petullo, C.F.; Meck, R.

    1996-06-01

    The Environmental Protection Agency (EPA), the Nuclear Regulatory Commission (NRC), the Department of Energy (DOE), and the Department of Defense (DOD-Army, Navy and Air Force) are jointly developing a single federal guidance document for investigating and characterizing sites that have been contaminated with radioactive materials. The multi-agency radiation survey and site investigation manual (MARSSIM) is being written to support implementation of Federal rules, currently under development, for the cleanup of sites contaminated with radioactive materials. The MARSSIM will provide guidance for planning, conducting, evaluating, and documenting environmental and structural radiation and sampling surveys in support of remediation of radioactive contamination. The philosophy, Standardized techniques and methodologies that form the basis for this manual are consistent with Federal limits, guidelines, and procedures. The sampling and radiation surveys that will be depicted in the manual will only entail the use of commercially available instrumentation and equipment. Survey designs and evaluation of results will only incorporate standard statistical approaches.

  12. Process for forming transparent aerogel insulating arrays

    DOEpatents

    Tewari, P.H.; Hunt, A.J.

    1985-09-04

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO/sub 2/, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO/sub 2/, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40/sup 0/C instead of at about 270/sup 0/C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementary particles or cosmic rays.

  13. Process for forming transparent aerogel insulating arrays

    DOEpatents

    Tewari, Param H.; Hunt, Arlon J.

    1986-01-01

    An improved supercritical drying process for forming transparent silica aerogel arrays is described. The process is of the type utilizing the steps of hydrolyzing and condensing aloxides to form alcogels. A subsequent step removes the alcohol to form aerogels. The improvement includes the additional step, after alcogels are formed, of substituting a solvent, such as CO.sub.2, for the alcohol in the alcogels, the solvent having a critical temperature less than the critical temperature of the alcohol. The resulting gels are dried at a supercritical temperature for the selected solvent, such as CO.sub.2, to thereby provide a transparent aerogel array within a substantially reduced (days-to-hours) time period. The supercritical drying occurs at about 40.degree. C. instead of at about 270.degree. C. The improved process provides increased yields of large scale, structurally sound arrays. The transparent aerogel array, formed in sheets or slabs, as made in accordance with the improved process, can replace the air gap within a double glazed window, for example, to provide a substantial reduction in heat transfer. The thus formed transparent aerogel arrays may also be utilized, for example, in windows of refrigerators and ovens, or in the walls and doors thereof or as the active material in detectors for analyzing high energy elementry particles or cosmic rays.

  14. Radionuclide Retention in Concrete Waste Forms

    SciTech Connect

    Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Wood, Marcus I.

    2010-09-30

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how waste form performance is affected by the full range of environmental conditions within the disposal facility; the process of waste form aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of waste form aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the waste forms come in contact with groundwater. The information presented in the report provides data that 1) quantify radionuclide retention within concrete waste form materials similar to those used to encapsulate waste in the Low-Level Waste Burial Grounds (LLBG); 2) measure the effect of concrete waste form properties likely to influence radionuclide migration; and 3) quantify the stability of uranium-bearing solid phases of limited solubility in concrete.

  15. Directory of Energy Data Collection Forms: Forms in use as of October 1996

    SciTech Connect

    1996-12-01

    This is the twentieth edition of the Directory of Energy Collection Data Forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy.

  16. Par Pond vegetation status Summer 1995 -- September survey descriptive summary

    SciTech Connect

    Mackey, H.E. Jr.; Riley, R.S.

    1995-09-01

    The water level of Par Pond was lowered approximately 20 feet in mid-1991 in order to protect downstream residents from possible dam failure suggested by subsidence on the downstream slope of the dam and to repair the dam. This lowering exposed both emergent and nonemergent macrophyte beds to drying conditions resulting in extensive losses. A survey of the emergent shoreline aquatic plant communities began in June 1995, three months after the refilling of Par Pond to approximately 200 feet above mean sea level and continued with this mid-September survey. Communities similar to the pre-drawdown Par Pond aquatic plant communities are becoming re-established; especially, beds of maidencane, lotus, waterlily, and watershield are now extensive and well established. Cattail occurrence continues to increase, but large beds common to Par Pond prior to the drawdown have not formed. Future surveys during the late growing seasons of 1995, and throughout 1996 and 1997, along with the evaluation of satellite data to map the areal extent of the macrophyte beds of Par Pond, are planned.

  17. Par Pond vegetation status Summer 1995 -- October survey descriptive summary

    SciTech Connect

    Mackey, H.E. Jr.; Riley, R.S.

    1995-11-01

    The water level of Par Pond was lowered approximately 20 feet in mid-1991 in order to protect downstream residents from possible dam failure suggested by subsidence on the downstream slope of the dam and to repair the dam. This lowering exposed both emergent and nonemergent macrophyte beds to drying conditions resulting in extensive losses. A survey of the emergent shoreline aquatic plant communities began in June 1995, three months after the refilling of Par Pond to approximately 200 feet above mean sea level and continued with this late October survey. Communities similar to the pre-drawdown Par Pond aquatic plant communities are becoming re-established; especially, beds of maiden cane, lotus, waterlily, and watershield are now extensive and well established. Cattail occurrence continues to increase, but large beds common to Par Pond prior to the drawdown have not formed. Future surveys throughout 1996 and 1997, along with the continued evaluation of satellite data to map the areal extent of the macrophyte beds of Par Pond, are planned.

  18. Ultraluminous infrared galaxies in the AKARI all-sky survey

    SciTech Connect

    Kilerci Eser, E., E-mail: ecekilerci@dark-cosmology.dk [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 Copenhagen (Denmark); Goto, T. [National Tsing Hua University, No. 101, Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Doi, Y., E-mail: tomo@phys.nthu.edu.tw, E-mail: doi@ea.c.u-tokyo.ac.jp [The University of Tokyo, Komaba 3-8-1, Meguro, Tokyo 153-8902 (Japan)

    2014-12-10

    We present a new catalog of 118 ultraluminous infrared galaxies (ULIRGs) and one hyperluminous infrared galaxy (HLIRG) by cross-matching the AKARI all-sky survey with the Sloan Digital Sky Survey Data Release 10 (SDSS DR10) and the final data release of the Two-Degree Field Galaxy Redshift Survey. Forty of the ULIRGs and one HLIRG are new identifications. We find that ULIRGs are interacting pair galaxies or ongoing or postmergers. This is consistent with the widely accepted view: ULIRGs are major mergers of disk galaxies. We confirm the previously known positive trend between the active galactic nucleus fraction and infrared luminosity. We show that ULIRGs have a large offset from the main sequence up to z ? 1; their offset from the z ? 2 'main sequence' is relatively smaller. We find a result consistent with the previous studies showing that, compared to local star-forming SDSS galaxies of similar mass, local ULIRGs have lower oxygen abundances. We demonstrate for the first time that ULIRGs follow the fundamental metallicity relation (FMR). The scatter of ULIRGs around the FMR (0.09 dex-0.5 dex) is comparable to the scatter of z ? 2-3 galaxies. We provide the largest local (0.050

  19. LENSING NOISE IN MILLIMETER-WAVE GALAXY CLUSTER SURVEYS

    SciTech Connect

    Hezaveh, Yashar; Vanderlinde, Keith; Holder, Gilbert; De Haan, Tijmen

    2013-08-01

    We study the effects of gravitational lensing by galaxy clusters of the background of dusty star-forming galaxies (DSFGs) and the cosmic microwave background (CMB), and examine the implications for Sunyaev-Zel'dovich-based (SZ) galaxy cluster surveys. At the locations of galaxy clusters, gravitational lensing modifies the probability distribution of the background flux of the DSFGs as well as the CMB. We find that, in the case of a single-frequency 150 GHz survey, lensing of DSFGs leads both to a slight increase ({approx}10%) in detected cluster number counts (due to a {approx}50% increase in the variance of the DSFG background, and hence an increased Eddington bias) and a rare (occurring in {approx}2% of clusters) 'filling-in' of SZ cluster signals by bright strongly lensed background sources. Lensing of the CMB leads to a {approx}55% reduction in CMB power at the location of massive galaxy clusters in a spatially matched single-frequency filter, leading to a net decrease in detected cluster number counts. We find that the increase in DSFG power and decrease in CMB power due to lensing at cluster locations largely cancel, such that the net effect on cluster number counts for current SZ surveys is subdominant to Poisson errors.

  20. Hawaii Water Quality Certification Form | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Water Quality Certification Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii Water Quality Certification Form Form Type ApplicationNotice Form...

  1. Directory of Energy Data Collection Forms: Forms in use as of October 1993

    SciTech Connect

    Not Available

    1993-12-28

    This is the seventeenth edition of the Directory of Energy Data Collection forms, an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). Originally entitled EIA Data Collection forms, this directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry.

  2. Biofuels Quality Surveys | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Quality Surveys Biofuels Quality Surveys 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ft013_alleman_2012_p.pdf (1.21 MB) More Documents & Publications Performance of Biofuels and Biofuel Blends Performance of Biofuels and Biofuel Blends Quality, Performance, and Emission Impacts of Biofuels and Biofuel Blends

  3. 2006 XSD Scientific Software User Survey.

    SciTech Connect

    Jemian, P. R.

    2007-01-22

    In preparation for the 2006 XSD Scientific Software workshop, our committee sent a survey on June 16 to 100 users in the APS user community. This report contains the survey and the responses we received. The responses are presented in the order received.

  4. Web Survey Requirements and Best Practices

    Office of Energy Efficiency and Renewable Energy (EERE)

    Surveys are a useful way to gauge the opinions of the Office of Energy Efficiency and Renewable Energy (EERE)'s target audiences. However, surveys often need approval from the Office of Management and Budget (OMB), which can take several months to complete.

  5. The 1986 residential occupant survey

    SciTech Connect

    Ivey, D.L.; Alley, P.K.

    1987-04-01

    In 1986, Pacific Northwest Laboratory developed the Residential Occupant Survey-Spring '86, which was implemented. The overall purpose of the study was to collect demographic, attitudinal, and behavioral data related to the use and conservation of electricity in dwellings participating in the Bonneville Power Administration's End-Use Load and Conservation Assessment Program (ELCAP). Information was collected on the respondents' perceptions of the energy efficiency of their dwelling, temperature the dwelling was kept when people were at home and awake during the last heating season, which rooms, if any, were not heated during the last heating season, number of times the dwelling was unoccupied for at least one week, number of times pets were let out of the dwelling per day, attitudes toward energy use and conservation and several socio-demographic variables such as age, sex, and total household income. The results of the data analyses showed age to be an important factor for reported indoor temperature and perceived energy efficiency of the dwelling. The results also showed that almost 60% of the ELCAP occupants do not heat one or more rooms during the heating season, and almost 45% of the ELCAP dwellings were unoccupied for at least one week during the reporting period. In terms of the reported allocation of household income for household energy expenses, the results showed that the reported dollar amount spent for the expenses remained relatively constant over income levels.

  6. Federal Buildings Supplemental Survey 1993

    SciTech Connect

    1995-11-01

    The Energy Information Administration (EIA) of the US Department of Energy (DOE) is mandated by Congress to be the agency that collects, analyzes, and disseminates impartial, comprehensive data about energy including the volume consumed, its customers, and the purposes for which it is used. The Federal Buildings Supplemental Survey (FBSS) was conducted by EIA in conjunction with DOE`s Office of Federal Energy Management Programs (OFEMP) to gain a better understanding of how Federal buildings use energy. This report presents the data from 881 completed telephone interviews with Federal buildings in three Federal regions. These buildings were systematically selected using OFEMP`s specifications; therefore, these data do not statistically represent all Federal buildings in the country. The purpose of the FBSS was threefold: (1) to understand the characteristics of Federal buildings and their energy use; (2) to provide a baseline in these three Federal regions to measure future energy use in Federal buildings as required in EPACT; and (3) to compare building characteristics and energy use with the data collected in the CBECS.

  7. Literature survey results: Topical report

    SciTech Connect

    Willson, W.G.; Ness, R.O.; Hendrikson, J.G.; Entzminger, J.A.; Jha, M.; Sinor, J.E.

    1988-01-01

    This report reviews mild gasification processes with respect to processing conditions and configurations. Special emphasis was placed on processes which could be commercialized within five years. Detailed market information was provided by J.E. Sinor concerning markets and economic considerations of the various processing steps. Processing areas studied include coal cleaning; mild gasification; and upgrading of the char, condensables, and hydrocarbon gases. Pros and cons in the different processing areas as well as ''gaps'' in pertinent data were identified and integrated into a detailed process development program. The report begins with a summary of the market assessment and an evaluation of the co-product. The impacts of feed materials and operating parameters--including coal rank, heating rate, pressure, agglomeration, temperature, and feed gas composition--on the co- products and processes were evaluated through a literature survey. Recommendations were made as to the preferred product specifications and operating parameters for a commercial plant. A literature review of mild gasification processes was conducted and evaluated with regard to product specification and operating parameters. Two candidate processes were chosen and discussed in detail with respect to scale-up feasibility. Recommendations were then made to process development needs to further consideration of the two processes. 129 refs., 33 figs., 16 tabs.

  8. Method of forming aluminum oxynitride material and bodies formed by such methods

    DOEpatents

    Bakas, Michael P. [Ammon, ID; Lillo, Thomas M. [Idaho Falls, ID; Chu, Henry S. [Idaho Falls, ID

    2010-11-16

    Methods of forming aluminum oxynitride (AlON) materials include sintering green bodies comprising aluminum orthophosphate or another sacrificial material therein. Such green bodies may comprise aluminum, oxygen, and nitrogen in addition to the aluminum orthophosphate. For example, the green bodies may include a mixture of aluminum oxide, aluminum nitride, and aluminum orthophosphate or another sacrificial material. Additional methods of forming aluminum oxynitride (AlON) materials include sintering a green body including a sacrificial material therein, using the sacrificial material to form pores in the green body during sintering, and infiltrating the pores formed in the green body with a liquid infiltrant during sintering. Bodies are formed using such methods.

  9. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect

    Plodinec, M.J.; Marra, S.L.

    1991-01-01

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970's, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  10. DWPF waste form compliance plan (Draft Revision)

    SciTech Connect

    Plodinec, M.J.; Marra, S.L.

    1991-12-31

    The Department of Energy currently has over 100 million liters of high-level radioactive waste in storage at the Savannah River Site (SRS). In the late 1970`s, the Department of Energy recognized that there were significant safety and cost advantages associated with immobilizing the high-level waste in a stable solid form. Several alternative waste forms were evaluated in terms of product quality and reliability of fabrication. This evaluation led to a decision to build the Defense Waste Processing Facility (DWPF) at SRS to convert the easily dispersed liquid waste to borosilicate glass. In accordance with the NEPA (National Environmental Policy Act) process, an Environmental Impact Statement was prepared for the facility, as well as an Environmental Assessment of the alternative waste forms, and issuance of a Record of Decision (in December, 1982) on the waste form. The Department of Energy, recognizing that start-up of the DWPF would considerably precede licensing of a repository, instituted a Waste Acceptance Process to ensure that these canistered waste forms would be acceptable for eventual disposal at a federal repository. This report is a revision of the DWPF compliance plan.

  11. Waste Form Evaluation Program. Final report

    SciTech Connect

    Franz, E.M.; Colombo, P.

    1985-09-01

    This report presents data that can be used to assess the acceptability of polyethylene and modified sulfur cement waste forms to meet the requirements of 10 CFR 61. The waste streams selected for this study include dry evaporator concentrate salts and incinerator ash as representative wastes which result from advanced volume reduction technologies and ion exchange resins which remain problematic for solidification using commercially available matrix materials. Property evaluation tests such as compressive strength, water immersion, thermal cycling, irradiation, biodegradation and leachability were conducted for polyethylene and sulfur cement waste forms over a range of waste-to-binder ratios. Based on the results of the tests, optimal waste loadings of 70 wt % sodium sulfate, 50 wt % boric acid, 40 wt % incinerator ash and 30 wt % ion exchange resins were established for polyethylene, although maximum loadings were considerably higher. For modified sulfur cement, optimal loadings of 40 wt % sodium sulfate, 40 wt % boric acid and 40 wt % incinerator ash are reported. Ion exchange resins are not recommended for incorporation into modified sulfur cement because of poor waste form performance even at very low waste concentrations. The results indicate that all waste forms tested within the range of optimal waste concentrations satisifed the requirements of the NRC Technical Position Paper on Waste Form.

  12. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect

    Miller, D. H.; Reigel, M. M.

    2012-09-25

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  13. Directory of energy data collection forms. Forms in use as of October 1995

    SciTech Connect

    1996-01-01

    This is an authoritative listing of selected public use forms currently used as basic energy information gathering tools by the Department of Energy (DOE). This directory provides an overview of DOE`s energy information collection programs for decisionmakers in Government and industry. Forms designed to collect energy information and used by the Energy Information Administration (EIA) as of October 1995 are included in this directory. For each form listed in this directory, an abstract is included that describes the form`s uses, its respondents, and the data collected. For the reader`s convenience in finding specific types of collections, several indices have been provided in this directory. A listing of the forms grouped by energy source and function begins on page 26. Beginning on page 38 are the publications derived from the collections, and on page 50, are the forms linked to general respondent categories.

  14. Hadronic form factors in kaon photoproduction

    SciTech Connect

    Syukurilla, L. Mart, T.

    2014-09-25

    We have revisited the effect of hadronic form factors in kaon photoproduction process by utilizing an isobaric model developed for kaon photoproduction off the proton. The model is able to reproduce the available experimental data nicely as well as to reveal the origin of the second peak in the total cross section, which was the main source of confusion for decades. Different from our previous study, in the present work we explore the possibility of using different hadronic form factors in each of the K?N vertices. The use of different hadronic form factors, e.g. dipole, Gaussian, and generalized dipole, has been found to produce a more flexible isobar model, which can provide a significant improvement in the model.

  15. Oligomer functionalized nanotubes and composites formed therewith

    DOEpatents

    Zettl, Alexander K; Sainsbury, Toby; Frechet, Jean M.J.

    2014-03-18

    Disclosed herein is a sequential functionalization methodology for the covalent modification of nanotubes with between one and four repeat units of a polymer. Covalent attachment of oligomer units to the surface of nanotubes results in oligomer units forming an organic sheath around the nanotubes, polymer-functionalized-nanotubes (P-NTs). P-NTs possess chemical functionality identical to that of the functionalizing polymer, and thus provide nanoscale scaffolds which may be readily dispersed within a monomer solution and participate in the polymerization reaction to form a polymer-nanotube/polymer composite. Formation of polymer in the presence of P-NTs leads to a uniform dispersion of nanotubes within the polymer matrix, in contrast to aggregated masses of nanotubes in the case of pristine-NTs. The covalent attachment of oligomeric units to the surface of nanotubes represents the formation of a functional nanoscale building block which can be readily dispersed and integrated within the polymer to form a novel composite material.

  16. Chiral extrapolation of nucleon magnetic form factors

    SciTech Connect

    P. Wang; D. Leinweber; A. W. Thomas; R.Young

    2007-04-01

    The extrapolation of nucleon magnetic form factors calculated within lattice QCD is investigated within a framework based upon heavy baryon chiral effective-field theory. All one-loop graphs are considered at arbitrary momentum transfer and all octet and decuplet baryons are included in the intermediate states. Finite range regularization is applied to improve the convergence in the quark-mass expansion. At each value of the momentum transfer (Q{sup 2}), a separate extrapolation to the physical pion mass is carried out as a function of m{sub {pi}} alone. Because of the large values of Q{sup 2} involved, the role of the pion form factor in the standard pion-loop integrals is also investigated. The resulting values of the form factors at the physical pion mass are compared with experimental data as a function of Q{sup 2} and demonstrate the utility and accuracy of the chiral extrapolation methods presented herein.

  17. Forming aspheric optics by controlled deposition

    DOEpatents

    Hawryluk, Andrew M.

    1998-01-01

    An aspheric optical element formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin (.about.100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application.

  18. Forming aspheric optics by controlled deposition

    DOEpatents

    Hawryluk, A.M.

    1998-04-28

    An aspheric optical element is disclosed formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin ({approx}100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application. 4 figs.

  19. Method of forming an HTS article

    DOEpatents

    Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

    2014-08-19

    A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

  20. Atomization methods for forming magnet powders

    DOEpatents

    Sellers, Charles H.; Branagan, Daniel J.; Hyde, Timothy A.

    2000-01-01

    The invention encompasses methods of utilizing atomization, methods for forming magnet powders, methods for forming magnets, and methods for forming bonded magnets. The invention further encompasses methods for simulating atomization conditions. In one aspect, the invention includes an atomization method for forming a magnet powder comprising: a) forming a melt comprising R.sub.2.1 Q.sub.13.9 B.sub.1, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; b) atomizing the melt to form generally spherical alloy powder granules having an internal structure comprising at least one of a substantially amorphous phase or a substantially nanocrystalline phase; and c) heat treating the alloy powder to increase an energy product of the alloy powder; after the heat treatment, the alloy powder comprising an energy product of at least 10 MGOe. In another aspect, the invention includes a magnet comprising R, Q, B, Z and X, wherein R is a rare earth element; X is an element selected from the group consisting of carbon, nitrogen, oxygen and mixtures thereof; Q is an element selected from the group consisting of Fe, Co and mixtures thereof; and Z is an element selected from the group consisting of Ti, Zr, Hf and mixtures thereof; the magnet comprising an internal structure comprising R.sub.2.1 Q.sub.13.9 B.sub.1.