National Library of Energy BETA

Sample records for direction deg deg

  1. Allostery Is an Intrinsic Property of the Protease Domain of DegS Implications for Enzyme Function and Evolution

    SciTech Connect (OSTI)

    Sohn, Jungsan; Grant, Robert A.; Sauer, Robert T. (MIT)

    2010-12-02

    DegS is a periplasmic Escherichia coli protease, which functions as a trimer to catalyze the initial rate-limiting step in a proteolytic cascade that ultimately activates transcription of stress response genes in the cytoplasm. Each DegS subunit consists of a protease domain and a PDZ domain. During protein folding stress, DegS is allosterically activated by peptides exposed in misfolded outer membrane porins, which bind to the PDZ domain and stabilize the active protease. It is not known whether allostery is conferred by the PDZ domains or is an intrinsic feature of the trimeric protease domain. Here, we demonstrate that free DegS{sup {Delta}PDZ} equilibrates between active and inactive trimers with the latter species predominating. Substrate binding stabilizes active DegS{sup {Delta}PDZ} in a positively cooperative fashion. Mutations can also stabilize active DegS{sup {Delta}PDZ} and produce an enzyme that displays hyperbolic kinetics and degrades substrate with a maximal velocity within error of that for fully activated, intact DegS. Crystal structures of multiple DegS{sup {Delta}PDZ} variants, in functional and non-functional conformations, support a two-state model in which allosteric switching is mediated by changes in specific elements of tertiary structure in the context of an invariant trimeric base. Overall, our results indicate that protein substrates must bind sufficiently tightly and specifically to the functional conformation of DegS{sup {Delta}PDZ} to assist their own degradation. Thus, substrate binding alone may have regulated the activities of ancestral DegS trimers with subsequent fusion of the protease domain to a PDZ domain, resulting in ligand-mediated regulation.

  2. Simplified 2DEG carrier concentration model for composite barrier AlGaN/GaN HEMT

    SciTech Connect (OSTI)

    Das, Palash Biswas, Dhrubes

    2014-04-24

    The self consistent solution of Schrodinger and Poisson equations is used along with the total charge depletion model and applied with a novel approach of composite AlGaN barrier based HEMT heterostructure. The solution leaded to a completely new analytical model for Fermi energy level vs. 2DEG carrier concentration. This was eventually used to demonstrate a new analytical model for the temperature dependent 2DEG carrier concentration in AlGaN/GaN HEMT.

  3. AC-magnetotransport of a 2DEG in the quantum Hall regime

    SciTech Connect (OSTI)

    Hernndez, C.; Chaubet, C.

    2014-05-15

    In this paper we present an ac-magneto-transport study of a two-dimensional electron gas (2DEG) in the quantum Hall effect (QHE) regime, for frequencies in the range [100Hz, 1MHz]. We present a new approach to understand admittance measurements based in the Landauer-Buttiker formalism for QHE edge channels and taking into account the capacitance and the topology of the cables connected to the contacts used in the measurements. Our model predicts an universal behavior with the a-dimensional parameter RC? where R is the 2 wires resistance of the 2DEG, C the capacitance cables and the angular frequency, in agreement with experiments.

  4. Exploring a possible origin of a 14 deg y-normal spin tilt at RHIC polarimeter

    SciTech Connect (OSTI)

    Meot, F.; Huang, H.

    2015-06-15

    A possible origin of a 14 deg y-normal spin n0 tilt at the polarimeter is in snake angle defects. This possible cause is investigated by scanning the snake axis angle µ, and the spin rotation angle at the snake, φ, in the vicinity of their nominal values.

  5. Threshold of photoelectron emission from CN{sub x} films deposited at room temperature and at 500 deg. C

    SciTech Connect (OSTI)

    Sago, Genki; Li Wanyan; Goto, Keisuke; Ichikawa, Yo; Ishida, Yoshihisa; Kohiki, Shigemi

    2004-10-15

    The threshold of photoelectron emission was measured for amorphous CN{sub x} films deposited at room temperature (RT) and at 500 deg. C. The x values of the films deposited at RT and at 500 deg. C by magnetron sputtering of a graphite target in a mixed N{sub 2}/Ar gas were 0.6 and 0.3, respectively. Ratios of the sp{sup 2}- to sp{sup 3}-hybridized components of both C and N for the film deposited at 500 deg. C were larger by {approx_equal}4 times than those for the film deposited at RT. The onsets of the electron emission by photon irradiation were 5.0 and 4.7 eV for the films deposited at RT and at 500 deg. C, respectively.

  6. Phase Development of NaOH Activated Blast Furnace Slag Geopolymers Cured at 90 deg. C

    SciTech Connect (OSTI)

    Zhang Bo; Bigley, C.; Ryan, M. J.; MacKenzie, K. J. D.; Brown, I. W. M.

    2009-07-23

    Geopolymers were synthesized from blast furnace slag activated with different levels of NaOH and cured at 90 deg. C. The crystalline and amorphous phases of the resulting geopolymers were characterized by XRD quantitative analysis, and {sup 29}Si and {sup 27}Al MAS NMR. Amorphous species are predominant in materials at all NaOH levels. In the amorphous phase, aluminium substituted silicate species (Q{sup 2}(1Al)) dominated among the species of Q{sup 0}, Q{sup 1}, Q{sup 2}(1Al) and Q{sup 2}(where Q{sup n}(mAl) denotes a silicate tetrahedron [SiO{sub 4}] with n bridging oxygen atoms and m adjacent tetrahedra substituted with an aluminate tetrahedron [AlO{sub 4}]). In addition, it was also found that 4-fold coordination aluminium [AlO{sub 4}] species ({sup 27}Al chemical shift 66.1 ppm) in low NaOH containing materials differs from the species ({sup 27}Al chemical shift 74.3 ppm) in high NaOH containing materials.

  7. Examination of 80 deg. C desorption isotherms of tritium aged Pd/k and LANA.75

    SciTech Connect (OSTI)

    Staack, G. C.; Shanahan, K. L.; Walters, R. T.; Pilgrim, R. D.

    2008-07-15

    Metal hydrides, specifically Pd deposited on kieselguhr (Pd/k) and LaNi{sub 4.25}Al{sub 0.75} (LANA.75), have been used at the Savannah River Site for almost twenty years for hydrogen isotope separation and storage. Radiolytic decay of tritium to helium-3 in the metal matrix causes three classic changes in the performance of the hydride: the plateau pressure decreases, the plateau slope increases, and a heel forms, reducing the reversible capacity of the hydride. Deuterium and tritium isotherms were collected on the virgin materials, only tritium isotherms were collected at approximately 2 years, and both deuterium and tritium isotherms were collected at approximately 3.5 years of quiescent aging at 26 deg. C. Each sample was loaded to 0.5-0.6 T/M prior to each aging period. Points of interest include comparisons of each sample at different aging periods and isotope effects on aged hydride isotherms. Partial restoration of thermodynamic properties by sample cycling has been observed in LANA. 75, though not previously reported in Pd. The methods and results are presented. (authors)

  8. Complete dipole response in {sup 208}Pb from high-resolution polarized proton scattering at 0 deg

    SciTech Connect (OSTI)

    Neumann-Cosel, P. von; Kalmykov, Y.; Poltoratska, I.; Ponomarev, V. Yu.; Richter, A.; Wambach, J.; Adachi, T.; Fujita, Y.; Matsubara, H.; Sakemi, Y.; Shimizu, Y.; Tameshige, Y.; Yosoi, M.; Bertulani, C. A.; Carter, J.; Fujita, H.; Dozono, M.; Fujita, K.; Hashimoto, H.; Hatanaka, K.

    2009-01-28

    The structure of electric and magnetic dipole modes in {sup 208}Pb is investigated in a high-resolution measurement of the (p-vector,p-vector') reaction under 0 deg. First results on the E1 strength in the region of the pygmy dipole resonance are reported.

  9. Surface analysis of Zircaloy-2 implanted with carbon before and after oxidation in air at 500 deg. C

    SciTech Connect (OSTI)

    Peng, D.Q. . E-mail: pdq01@mails.tsinghua.edu.cn; Bai, X.D.; Pan, F.; Sun, H.; Chen, B.S.

    2006-03-15

    Zircaloy-2 specimens were implanted with carbon ions in the fluence range from 1 x 10{sup 16} to 1 x 10{sup 18} ions/cm{sup 2}, using a MEVVA source at an extraction voltage of 40 kV at a maximum temperature of 380 deg. C. The valences and depth profiles of elements in the implanted surface of Zircaloy-2 were analyzed by X-ray photoelectron spectroscopy and Auger electron spectroscopy, respectively. Scanning electron microscopy was used to examine the micro-morphology of samples. The color of the oxidized samples was checked with an optical scanner. Glancing-angle X-ray diffraction at 0.3{sup o} incident angles was employed to examine the phase transformations of implanted samples before and after oxidation in the air at 500 deg. C for 2 h. Before oxidation, at fluences less than 5 x 10{sup 16} ions/cm{sup 2}, hexagonal zirconia (H-ZrO{sub 0.35}) was present. At a fluence of 1 x 10{sup 17} ions/cm{sup 2}, rhombohedral zirconia (R-Zr{sub 3}O) appeared. When the fluence reached 1 x 10{sup 18} ions/cm{sup 2}, cubic zirconium carbide was produced. There are many pits, both deep and shallow, in the sample surfaces, both prior to oxidation and after oxidation. Oxidation in the air at 500 deg. C gave rise to black surfaces on all samples. The X-ray diffraction results showed that monoclinic and tetragonal zirconia were present in the surface of as-received sample. For implanted samples, monoclinic and tetragonal zirconia are still present, while cubic zirconium carbide is produced at all fluences. The presence of ZrC is attributed to the high-temperature, long-time (2 h) exposure.

  10. Water vapor and temperature inversions near the 0 deg C level over the tropical western Pacific. Master's thesis

    SciTech Connect (OSTI)

    Hart, K.A.

    1994-01-01

    During the Intensive Observation Period (IOP), several periods of water vapor and temperature inversions near the 0 deg C level were observed. Satellite and radiosonde data from TOGA COARE are used to document the large-scale conditions and thermodynamic and kinematic structures present during three extended periods in which moisture and temperature inversions near the freezing level were very pronounced. Observations from each case are synthesized into schematics which represent typical structures of the inversion phenomena. Frequency distributions of the inversion phenomena along with climatological humidity and temperature profiles are calculated for the four-month IOP.

  11. The spinodal decomposition in 17-4PH stainless steel subjected to long-term aging at 350 deg. C

    SciTech Connect (OSTI)

    Wang Jun Zou Hong; Li Cong; Qiu Shaoyu; Shen Baoluo

    2008-05-15

    The influence of aging time on the microstructure evolution of 17-4 PH martensitic stainless steel was studied by transmission electron microscopy (TEM). Results showed that the martensite decomposed by a spinodal decomposition mechanism after the alloy was subjected to long-term aging at 350 deg. C. The fine scale spinodal decomposition of {alpha}-ferrite brought about a Cr-enriched bright stripe and a Fe-enriched dark stripe, i.e., {alpha}' and {alpha} phases, separately, which were perpendicular to the grain boundary. The spinodal decomposition started at the grain boundary. Then with prolonged aging time, the decomposition microstructure expanded from the grain boundary to interior. The wavelength of the spinodally decomposed microstructure changed little with extended aging time.

  12. THE MASSIVE AND DISTANT CLUSTERS OF WISE SURVEY. II. INITIAL SPECTROSCOPIC CONFIRMATION OF z ? 1 GALAXY CLUSTERS SELECTED FROM 10,000 deg{sup 2}

    SciTech Connect (OSTI)

    Stanford, S. A.; Gonzalez, Anthony H.; Gettings, Daniel P.; Brodwin, Mark; Eisenhardt, Peter R. M.; Stern, Daniel; Wylezalek, Dominika

    2014-08-01

    We present optical and infrared imaging and optical spectroscopy of galaxy clusters which were identified as part of an all-sky search for high-redshift galaxy clusters, the Massive and Distant Clusters of WISE Survey (MaDCoWS). The initial phase of MaDCoWS combined infrared data from the all-sky data release of the Wide-field Infrared Survey Explorer (WISE) with optical data from the Sloan Digital Sky Survey to select probable z ? 1 clusters of galaxies over an area of 10,000 deg{sup 2}. Our spectroscopy confirms 19 new clusters at 0.7 < z < 1.3, half of which are at z > 1, demonstrating the viability of using WISE to identify high-redshift galaxy clusters. The next phase of MaDCoWS will use the greater depth of the AllWISE data release to identify even higher redshift cluster candidates.

  13. THE SLOAN DIGITAL SKY SURVEY STRIPE 82 IMAGING DATA: DEPTH-OPTIMIZED CO-ADDS OVER 300 deg{sup 2} IN FIVE FILTERS

    SciTech Connect (OSTI)

    Jiang, Linhua; Fan, Xiaohui; McGreer, Ian D.; Green, Richard; Bian, Fuyan; Strauss, Michael A.; Buck, Zoë; Annis, James; Hodge, Jacqueline A.; Myers, Adam D.; Rafiee, Alireza; Richards, Gordon

    2014-07-01

    We present and release co-added images of the Sloan Digital Sky Survey (SDSS) Stripe 82. Stripe 82 covers an area of ∼300 deg{sup 2} on the celestial equator, and has been repeatedly scanned 70-90 times in the ugriz bands by the SDSS imaging survey. By making use of all available data in the SDSS archive, our co-added images are optimized for depth. Input single-epoch frames were properly processed and weighted based on seeing, sky transparency, and background noise before co-addition. The resultant products are co-added science images and their associated weight images that record relative weights at individual pixels. The depths of the co-adds, measured as the 5σ detection limits of the aperture (3.''2 diameter) magnitudes for point sources, are roughly 23.9, 25.1, 24.6, 24.1, and 22.8 AB magnitudes in the five bands, respectively. They are 1.9-2.2 mag deeper than the best SDSS single-epoch data. The co-added images have good image quality, with an average point-spread function FWHM of ∼1'' in the r, i, and z bands. We also release object catalogs that were made with SExtractor. These co-added products have many potential uses for studies of galaxies, quasars, and Galactic structure. We further present and release near-IR J-band images that cover ∼90 deg{sup 2} of Stripe 82. These images were obtained using the NEWFIRM camera on the NOAO 4 m Mayall telescope, and have a depth of about 20.0-20.5 Vega magnitudes (also 5σ detection limits for point sources)

  14. The Sloan Digital Sky Survey Stripe 82 Imaging Data: Depth-Optimized Co-adds Over 300 deg$^2$ in Five Filters

    SciTech Connect (OSTI)

    Jiang, Linhua; Fan, Xiaohui; Bian, Fuyan; McGreer, Ian D.; Strauss, Michael A.; Annis, James; Buck, Zoë; Green, Richard; Hodge, Jacqueline A.; Myers, Adam D.; Rafiee, Alireza; Richards, Gordon

    2014-06-25

    We present and release co-added images of the Sloan Digital Sky Survey (SDSS) Stripe 82. Stripe 82 covers an area of ~300 deg(2) on the celestial equator, and has been repeatedly scanned 70-90 times in the ugriz bands by the SDSS imaging survey. By making use of all available data in the SDSS archive, our co-added images are optimized for depth. Input single-epoch frames were properly processed and weighted based on seeing, sky transparency, and background noise before co-addition. The resultant products are co-added science images and their associated weight images that record relative weights at individual pixels. The depths of the co-adds, measured as the 5σ detection limits of the aperture (3.''2 diameter) magnitudes for point sources, are roughly 23.9, 25.1, 24.6, 24.1, and 22.8 AB magnitudes in the five bands, respectively. They are 1.9-2.2 mag deeper than the best SDSS single-epoch data. The co-added images have good image quality, with an average point-spread function FWHM of ~1'' in the r, i, and z bands. We also release object catalogs that were made with SExtractor. These co-added products have many potential uses for studies of galaxies, quasars, and Galactic structure. We further present and release near-IR J-band images that cover ~90 deg(2) of Stripe 82. These images were obtained using the NEWFIRM camera on the NOAO 4 m Mayall telescope, and have a depth of about 20.0-20.5 Vega magnitudes (also 5σ detection limits for point sources).

  15. Annealing behavior between room temperature and 2000 deg. C of deep level defects in electron-irradiated n-type 4H silicon carbide

    SciTech Connect (OSTI)

    Alfieri, G.; Monakhov, E.V.; Svensson, B.G.; Linnarsson, M.K.

    2005-08-15

    The annealing behavior of irradiation-induced defects in 4H-SiC epitaxial layers grown by chemical-vapor deposition has been systematically studied by means of deep level transient spectroscopy (DLTS). The nitrogen-doped epitaxial layers have been irradiated with 15-MeV electrons at room temperature and an isochronal annealing series from 100 to 2000 deg. C has been performed. The DLTS measurements, which have been carried out in the temperature range from 120 to 630 K after each annealing step, revealed the presence of six electron traps located in the energy range of 0.45-1.6 eV below the conduction-band edge (E{sub c}). The most prominent and stable ones occur at E{sub c}-0.70 eV (labeled Z{sub 1/2}) and E{sub c}-1.60 eV(EH{sub 6/7}). After exhibiting a multistage annealing process over a wide temperature range, presumably caused by reactions with migrating defects, a significant fraction of both Z{sub 1/2} and EH{sub 6/7} (25%) still persists at 2000 deg. C and activation energies for dissociation in excess of 8 and {approx}7.5 eV are estimated for Z{sub 1/2} and EH{sub 6/7}, respectively. On the basis of these results, the identity of Z{sub 1/2} and EH{sub 6/7} is discussed and related to previous assignments in the literature.

  16. FABRICATION AND TESTING OF MICROWAVE SINTERED SOL-GEL SPRAY-ON BISMUTH TITANATE-LITHIUM NIOBATE BASED PIEZOELECTRIC COMPOSITE FOR USE AS A HIGH TEMPERATURE (>500 deg. C) ULTRASONIC TRANSDUCER

    SciTech Connect (OSTI)

    Searfass, C. T.; Baba, A.; Tittmann, B. R.; Agrawal, D. K.

    2010-02-22

    Bismuth titanate-lithium niobate based ultrasonic transducers have been fabricated using a sol-gel spray-on deposition technique. These transducers were then tested to determine their potential as high temperature ultrasonic transducers. Fabricated transducers were capable of operating to 1000 deg. C in pulse-echo mode; however, the exposure to such extreme temperatures appears to be destructive to the transducers.

  17. SrTiO{sub 3}(001)-({radical}(5)x{radical}(5))-R26.6 deg. reconstruction: A surface resulting from phase separation in a reducing environment

    SciTech Connect (OSTI)

    Newell, David T.; Silly, Fabien; Castell, Martin R.; Harrison, Alastair

    2007-05-15

    Scanning tunneling microscopy (STM) was used to produce atomic resolution images of the Nb-doped SrTiO{sub 3}(001)-({radical}(5)x{radical}(5))-R26.6 deg. reconstruction and its precursor surfaces. Low-energy electron diffraction was used to identify the surface structure in combination with the STM imaging. The ({radical}(5)x{radical}(5))-R26.6 deg. reconstruction was observed growing as an adlayer on top of the underlying terraces. The formation of this structure could routinely be detected by an increase in the crystal's electrical conductivity during ultrahigh vacuum (UHV) annealing at 1300 deg. C. This rise in conductivity occurs due to significant reduction of the crystal. Scanning electron microscopy (SEM) on these samples showed small islands with a rectangular base separated by flat regions. Auger electron spectroscopy showed titanium enrichment, and strontium and oxygen depletion of the surface region. The islands seen in the SEM images are TiO crystals, as reported by S. B. Lee et al. [Ultramicroscopy 104, 30 (2005)]. The flat regions between the islands are composed of a Sr adlayer on the surface that is consistent with the ({radical}(5)x{radical}(5))-R26.6 deg. adatom model of Kubo and Nazoye [Phys. Rev. Lett. 86, 1801 (2001)]. We propose that the TiO islands and the ({radical}(5)x{radical}(5))-R26.6 deg. Sr adlayer reconstruction form due to phase separation in the surface region of the crystal. This phase separation is driven by oxygen depletion which occurs during high-temperature UHV annealing of the sample.

  18. Discharge temperature higher than 30 deg C

    SciTech Connect (OSTI)

    Shari Kelley

    2015-06-16

    This submission includes three files from two sources. One file is derived from USGS data and includes a series of manipulations to evaluate only shallow wells with high estimated geothermal gradients. Two other files are springs and wells with discharge temperatures above 30°C from the NMBGMR Aquifer Mapping database

  19. Discharge temperature higher than 30 deg C

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Shari Kelley

    2015-06-16

    This submission includes three files from two sources. One file is derived from USGS data and includes a series of manipulations to evaluate only shallow wells with high estimated geothermal gradients. Two other files are springs and wells with discharge temperatures above 30C from the NMBGMR Aquifer Mapping database

  20. Hydrothermal crystallization of Na{sub 2}Ti{sub 6}O{sub 13}, Na{sub 2}Ti{sub 3}O{sub 7}, and Na{sub 16}Ti{sub 10}O{sub 28} in the NaOH-TiO{sub 2}-H{sub 2}O system at a temperature of 500 deg. C and a pressure of 0.1 GPa: The structural mechanism of self-assembly of titanates from suprapolyhedral clusters

    SciTech Connect (OSTI)

    Hyushin, G. D.

    2006-07-15

    An increase in the NaOH concentration in the NaOH-TiO{sub 2} (rutile)-H{sub 2}O system at a temperature of 500 deg. C and a pressure of 0.1 GPa leads to the crystallization R-TiO{sub 2} + Na{sub 2}Ti{sub 6}O{sub 13} {sup {yields}} Na{sub 2}Ti{sub 3}O{sub 7} {sup {yields}} Na{sub 16}Ti{sub 10}O{sub 28}. Crystals of the Na{sub 2}Ti{sub 6}O{sub 13} titanate (space group C2/m) have the three-dimensional framework structure Ti{sub 6}O{sub 13}. The structure of the Na{sub 2}Ti{sub 3}O{sub 7} titanate (space group P2{sub 1}/m) contains the two-dimensional layers Ti{sub 3}O{sub 7}. The structure of the Na{sub 16}Ti{sub 10}O{sub 28} titanate (space group P-1) is composed of the isolated ten-polyhedron cluster precursors Ti{sub 10}O{sub 28}. In all the structures, the titanium atoms have an octahedral coordination (MTiO{sub 6}). The matrix self-assembly of the Na{sub 2}Ti{sub 6}O{sub 13} and Na{sub 2}Ti{sub 3}O{sub 7} (Na{sub 4}Ti{sub 6}O{sub 14}) crystal structures from Na{sub 4}M{sub 12} invariant precursors is modeled. These precursors are clusters consisting of twelve M polyhedra linked through the edges. It is demonstrated that the structurally rigid precursors Na{sub 4}M{sub 12} control all processes of the subsequent evolution of the crystal-forming titanate clusters. The specific features of the self-assembly of the Na{sub 2}Ti{sub 3}O{sub 7} structure that result from the additional incorporation of twice the number of sodium atoms into the composition of the high-level clusters are considered.

  1. Magnetic thaw-down and boil-off due to magneto acceptors in 2DEG

    SciTech Connect (OSTI)

    Chaubet, C.; Raymond, A.; Bisotto, I.; Harmand, J. C.; Kubisa, M.; Zawadzki, W.

    2013-12-04

    The Quantum Hall Effect (QHE) and Shubnikov-de Haas effect are investigated experimentally using n type modulation-doped GaAs/GaAlAs quantum wells (QWs) additionally doped in the well with beryllium acceptor atoms. It is presently shown that the localized magneto-acceptor (MA) states which possess discrete energies above the corresponding Landau levels (LLs) lead to two observable effects in magneto-transport: magnetic thaw-down and magnetic boil-off of 2D electrons. Both effects are related to the fact that electrons occupying the localized MA states cannot conduct. Thus in the thaw-down effect the electrons fall down from the MA states to the free Landau states. This leads to a shift of the Hall plateau towards higher magnetic fields as a consequence of an increase of the 2D electron density N{sub S}. In the boil-off effect the electrons are pushed from the free Landau states to the empty MA states under high enough Hall electric field. This process has an avalanche character leading to a dramatic increase of magneto-resistance, consequence of a decrease of N{sub S}.

  2. The Sloan Digital Sky Survey COADD: 275 deg{sup 2} of deep Sloan...

    Office of Scientific and Technical Information (OSTI)

    Title: The Sloan Digital Sky Survey COADD: 275 degsup 2 of deep Sloan Digital Sky Survey imaging on stripe 82 We present details of the construction and characterization of the ...

  3. The LSST Camera 500 watt -130 degC Mixed Refrigerant Cooling System

    SciTech Connect (OSTI)

    Bowden, Gordon B.; Langton, Brian J.; Little, William A.; Powers, Jacob R; Schindler, Rafe H.; Spektor, Sam; /MMR-Technologies, Mountain View, CA

    2014-05-28

    The LSST Camera has a higher cryogenic heat load than previous CCD telescope cameras due to its large size (634 mm diameter focal plane, 3.2 Giga pixels) and its close coupled front-end electronics operating at low temperature inside the cryostat. Various refrigeration technologies are considered for this telescope/camera environment. MMR-Technology’s Mixed Refrigerant technology was chosen. A collaboration with that company was started in 2009. The system, based on a cluster of Joule-Thomson refrigerators running a special blend of mixed refrigerants is described. Both the advantages and problems of applying this technology to telescope camera refrigeration are discussed. Test results from a prototype refrigerator running in a realistic telescope configuration are reported. Current and future stages of the development program are described. (auth)

  4. Sample cell for powder x-ray diffraction at up to 500 bars and 200 deg. C

    SciTech Connect (OSTI)

    Jupe, Andrew C.; Wilkinson, Angus P.

    2006-11-15

    A low cost sample cell for powder diffraction at high pressure and temperature that employs either sapphire or steel pressure tubes is described. The cell can be assembled rapidly, facilitating the study of chemically reacting systems, and it provides good control of both pressure and temperature in a regimen where diamond anvil cells and multianvil apparatus cannot be used. The design provides a relatively large sample volume making it suitable for the study of quite large grain size materials, such as hydrating cement slurries. However, relatively high energy x rays are needed to penetrate the pressure tube.

  5. Composition of motor-vehicle organic emissions under elevated-temperature summer driving conditions (75 to 105 deg F)

    SciTech Connect (OSTI)

    Stump, F.D.; Knapp, K.T.; Ray, W.D.; Snow, R.; Burton, C.

    1992-01-01

    Emissions from seven late-model popular V-6 and V-8 motor vehicles were characterized at three test temperatures. The Urban Dynamometer Driving Schedule was used for vehicle tailpipe testing. Six vehicles fueled by port fuel injection (PFI) and one vehicle with a carbureted fuel system were tested at temperatures of 75, 90, and 105 F with unleaded regular summer grade gasoline. Tailpipe and evaporative emissions were determined at each test temperature. Measured emissions were the total hydrocarbons (THCs), speciated hydrocarbons, speciated aldehydes, carbon monoxide (CO), oxides of nitrogen (NOx), benzene, and 1,3-butadiene. In general, tailpipe emissions of THC, benzene, and 1,3-butadiene from the vehicles were not temperature sensitive, but the CO and NOx emissions showed some temperature sensitivity. Formaldehyde, acetaldehyde, and total aldehyde emissions from the PFI vehicles were also not temperature dependent, while formaldehyde emissions from the carbureted vehicle decreased slightly with increasing test temperature. Evaporative THC emissions generally increased with increasing test temperature. Hydrocarbon emissions saturated and broke through the evaporative carbon canister of one PFI vehicle during the 105 F hot soak while the other six vehicles showed no hydrocarbon breakthrough.

  6. Direct

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and the pollutant emission is hence directly proportional to the bulk neutral density. Simultaneously monitoring the total emission at 1040 nm and the neutral contaminant...

  7. Directions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Hilton Santa Fe Buffalo Thunder at (505) 455-5555 for shuttle information from the airport and downtown Santa Fe. Driving Directions to Hilton Santa Fe Buffalo Thunder Hilton...

  8. ARM - Datastreams - assistsummary

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... setting degC abbsetpoint ( time ) Ambient blackbody temperature at apex of cavity degC abbthermistorapex ( time ) Ambient blackbody temperature at bottom of cone degC ...

  9. affects on the transport of airborne emissions. This information...

    National Nuclear Security Administration (NNSA)

    Precipitation, barometric pressure, and solar radiation Vertical temperature gradient ... Direction (deg) Peak I-sec Gust (mls) - - Solar Radiation ( m d a ) Mean Daily ...

  10. News Item

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Cs (Spherical aberration) 2.2 mm Cc (Chromatic aberration) 2.2 mm Specimen Stage Double tilt holder angle 70 deg 30 deg Cryo double tilt holder angle 49 deg 30 deg...

  11. ARM - Datastreams - prprad

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    pyrgeometer degC downlonghemispcasetemp ( time ) Downwelling pyrgeometer dome thermistor temperature, pyrgeometer degC downlonghemispdometemp ( time ) Standard...

  12. Sputter deposition of Al-doped ZnO films with various incident angles

    SciTech Connect (OSTI)

    Sato, Yasushi; Yanagisawa, Kei; Oka, Nobuto; Nakamura, Shin-ichi; Shigesato, Yuzo

    2009-09-15

    Al-doped ZnO (AZO) films were sputter deposited on glass substrates heated at 200 degree sign C under incident angles of sputtered particles at 0 degree sign (incidence normal to substrate), 20 deg., 40 deg., 60 deg., and 80 deg. In the case of normal incidence, x-ray diffraction pole figures show a strong [001] preferred orientation normal to the film surface. In contrast, in the case wherein the incident angles were higher than 60 degree sign , the [001] orientation inclined by 25 deg. - 35 deg. toward the direction of sputtered particles. Transmission electron microscopy revealed that the tilt angle of the [001] orientation increased with increasing angle of the incident sputtered particles, whereas the columnar structure did not show any sign of inclination with respect to the substrate plane.

  13. Direct electrolytic reduction of UO{sub 2} vs. U{sub 3}O{sub 8}

    SciTech Connect (OSTI)

    Barnes, L.A.; Willit, J.L.

    2007-07-01

    UO{sub 2} and U{sub 3}O{sub 8} have been electrochemically reduced to uranium metal by direct electrolytic reduction at 650 deg. C in molten LiCl-Li{sub 2}O. Differences in electrolyte concentrations and efficiency have been observed in the reduction process as a function of using UO{sub 2} vs. U{sub 3}O{sub 8} as the feed material. Numerous tests with UO{sub 2} as the feed material have been conducted to optimize the electrochemical cell design and process chemistry. These studies have reproducibly demonstrated greater than 99% reduction with current efficiencies as high as 75% and only a slight decrease in the Li{sub 2}O concentration. Initial scoping experiments using U{sub 3}O{sub 8} have achieved greater than 93% reduction to uranium metal. However, in the U{sub 3}O{sub 8} experiments, the Li{sub 2}O concentration dropped significantly upon introducing the feed basket into the cell electrolyte due to formation of Li{sub 2}UO{sub 4}., but under appropriate conditions could be fully reduced to metal. (authors)

  14. Directives Tools

    Directives, Delegations, and Requirements [Office of Management (MA)]

    Useful links and resources for Directives Writers, Directives Point of Contact (DPCs), Subject Matter Experts (SMEs), and Draft Directive Reviewers.

  15. Connecting speeds, directions and arrival times of 22 coronal mass ejections from the sun to 1 AU

    SciTech Connect (OSTI)

    Mstl, C.; Veronig, A. M.; Rollett, T.; Temmer, M.; Peinhart, V.; Amla, K.; Hall, J. R.; Liewer, P. C.; De Jong, E. M.; Colaninno, R. C.; Davies, J. A.; Harrison, R. A.; Lugaz, N.; Farrugia, C. J.; Galvin, A. B.; Liu, Y. D.; Luhmann, J. G.; Vrnak, B.

    2014-06-01

    Forecasting the in situ properties of coronal mass ejections (CMEs) from remote images is expected to strongly enhance predictions of space weather and is of general interest for studying the interaction of CMEs with planetary environments. We study the feasibility of using a single heliospheric imager (HI) instrument, imaging the solar wind density from the Sun to 1 AU, for connecting remote images to in situ observations of CMEs. We compare the predictions of speed and arrival time for 22 CMEs (in 2008-2012) to the corresponding interplanetary coronal mass ejection (ICME) parameters at in situ observatories (STEREO PLASTIC/IMPACT, Wind SWE/MFI). The list consists of front- and backsided, slow and fast CMEs (up to 2700 km s{sup 1}). We track the CMEs to 34.9 7.1 deg elongation from the Sun with J maps constructed using the SATPLOT tool, resulting in prediction lead times of 26.4 15.3 hr. The geometrical models we use assume different CME front shapes (fixed-?, harmonic mean, self-similar expansion) and constant CME speed and direction. We find no significant superiority in the predictive capability of any of the three methods. The absolute difference between predicted and observed ICME arrival times is 8.1 6.3 hr (rms value of 10.9 hr). Speeds are consistent to within 284 288 km s{sup 1}. Empirical corrections to the predictions enhance their performance for the arrival times to 6.1 5.0 hr (rms value of 7.9 hr), and for the speeds to 53 50 km s{sup 1}. These results are important for Solar Orbiter and a space weather mission positioned away from the Sun-Earth line.

  16. Directives System

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-01-30

    The Department of Energy (DOE) Directives System is the means by which DOE policies, requirements, and responsibilities are developed and communicated throughout the Department. Directives are used to inform, direct, and guide employees in the performance of their jobs, and to enable employees to work effectively within the Department and with agencies, contractors, and the public. Cancels: DOE O 251.1, DOE M 251.1-1

  17. Strategic Direction

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Volume One Film Collection Volume Two 75th Anniversary Hydropower in the Northwest Woody Guthrie Videos Strategic Direction Branding & Logos Power of the River History Book...

  18. DRIVING DIRECTIONS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    South Alamo Street San Antonio, Texas 78205 (210) 222-1400 San Antonio International Airport DIRECTIONS Take Interstate 281 south to Commerce Street. Continue west on Commerce...

  19. MONTICELLO NPL SITES

    Office of Legacy Management (LM)

    ... WWD SPEED (mph) HEAT COOL AVG MEAN DEG DEG WIND DOM DAY 'rEMP HIGH TIME LOW TIME DAYS DAYS ... 18' 00 11 w TEMPERATURE ( *n. RAIN (in), WIND SPEED (mph) HEAT COOL VG MEAN DEG DEc; ...

  20. Glossary Glossary

    U.S. Energy Information Administration (EIA) (indexed site)

    calculated in terms of the following for- mula: Deg API 141.5 sp gr60degF 60degF - 131.5 The higher the API gravity, the lighter the compound. Light crudes generally exceed...

  1. Relation between Atmospheric Ozone and Geomagnetic Disturbances...

    Office of Scientific and Technical Information (OSTI)

    This involves a decrease of ozone in the 50 to 65 deg N region and an increase south of 50 deg N. Two or three days after the storm, the ozone amount increases in the 50 to 65 deg ...

  2. Directives Help

    Directives, Delegations, and Requirements [Office of Management (MA)]

    All DOE directives are available through this site. While it may seem overwhelming, given the number of documents, we have provided a number of ways in which you may get to the information you need.

  3. Direct Frisk

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Direct Federal Financial Interventions and Subsidies in Energy in Fiscal Year 2013 March 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Direct Federal Financial Interventions and Subsidies in Energy in Fiscal Year 2013 i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses,

  4. ARM - Datastreams - saszevis

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    temperature degC chillertemperature ( time ) Spectrometer internal clock ticks for Si VIS spectrometer s clockticks ( time ) Collector internal dew point deg C collectordewpoint ...

  5. ARM - Datastreams - sashevishisun

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    temperature degC chillertemperature ( time ) Spectrometer internal clock ticks for Si VIS spectrometer s clockticks ( time ) Collector internal dew point deg C collectordewpoint ...

  6. ARM - Datastreams - sashenirlowsun

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    degC chillertemperature ( time ) Spectrometer internal clock ticks for InGaAs NIR spectrometer s clockticks ( time ) Collector internal dew point deg C ...

  7. ARM - Datastreams - saszenir

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    degC chillertemperature ( time ) Spectrometer internal clock ticks for InGaAs NIR spectrometer s clockticks ( time ) Collector internal dew point deg C ...

  8. ARM - Datastreams - sashenirhisun

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    degC chillertemperature ( time ) Spectrometer internal clock ticks for InGaAs NIR spectrometer s clockticks ( time ) Collector internal dew point deg C ...

  9. ARM - Datastreams - sashevislowsun

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    temperature degC chillertemperature ( time ) Spectrometer internal clock ticks for Si VIS spectrometer s clockticks ( time ) Collector internal dew point deg C collectordewpoint ...

  10. ARM - Datastreams - sashemfr

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Units Variable Temperature of Si CCD AD board degC adtemperaturespectrometervis ( time ) Temperature of Si CCD AD board degC adtemperaturevis ( time ) Airmass unitless...

  11. ARM - Datastreams - gvr

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... of noise diode degC tempnoisediode ( time ) Physical temperature of thermoelectric cooling plate degC tempthermoelectriccoolingplate ( time ) Temperature of the warm ...

  12. DIRECTIONAL COUPLERS

    DOE Patents [OSTI]

    Nigg, D.J.

    1961-12-01

    A directional coupler of small size is designed. Stripline conductors of non-rectilinear configuration, and separated from each other by a thin dielectric spacer. cross each other at least at two locations at right angles, thus providing practically pure capacitive coupling which substantially eliminates undesirable inductive coupling. The conductors are sandwiched between a pair of ground planes. The coupling factor is dependent only on the thickness and dielectric constant of the dielectric spacer at the point of conductor crossover. (AEC)

  13. DIRECTIONAL ANTENNA

    DOE Patents [OSTI]

    Bittner, B.J.

    1958-05-20

    A high-frequency directional antenna of the 360 d scaring type is described. The antenna has for its desirable features the reduction in both size and complexity of the mechanism for rotating the antenna through its scanning movement. These advantages result from the rotation of only the driven element, the reflector remaining stationary. The particular antenna structure comprises a refiector formed by a plurality of metallic slats arranged in the configuration of an annular cage having the shape of a zone of revolution. The slats are parallel to each other and are disposed at an angle of 45 d to the axis of the cage. A directional radiator is disposed inside the cage at an angle of 45 d to the axis of the cage in the same direction as the reflecting slats which it faces. As the radiator is rotated, the electromagnetic wave is reflected from the slats facing the radiator and thereafter passes through the cage on the opposite side, since these slats are not parallel with the E vector of the wave.

  14. Active Control of Nitride Plasmonic Dispersion in the Far Infrared.

    SciTech Connect (OSTI)

    Shaner, Eric A.; Dyer, Gregory Conrad; Seng, William Francis; Bethke, Donald Thomas; Grine, Albert Dario,; Baca, Albert G.; Allerman, Andrew A.

    2014-11-01

    We investigate plasmonic structures in nitride-based materials for far-infrared (IR) applications. The two dimensional electron gas (2DEG) in the GaN/AlGaN material system, much like metal- dielectric structures, is a patternable plasmonic medium. However, it also permits for direct tunability via an applied voltage. While there have been proof-of-principle demonstrations of plasma excitations in nitride 2DEGs, exploration of the potential of this material system has thus far been limited. We recently demonstrated coherent phenomena such as the formation of plasmonic crystals, strong coupling of tunable crystal defects to a plasmonic crystal, and electromagnetically induced transparency in GaAs/AlGaAs 2DEGs at sub-THz frequencies. In this project, we explore whether these effects can be realized in nitride 2DEG materials above 1 THz and at temperatures exceeding 77 K.

  15. Directives Quarterly Updates - DOE Directives, Delegations, and...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Quarterly Updates by Diane Johnson Listings of new Justification Memoranda and new or revised Directives that have been posted to the DOE Directives, Delegations, and Requirements ...

  16. Directives Tools - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directives Tools by Website Administrator Useful links and resources for Directives Writers, Directives Point of Contact (DPCs), Subject Matter Experts (SMEs), and Draft Directive Reviewers. Processing a Policy or Notice Processing a Policy or Notice The development process for Policies and Notices (Text version available here) Processing an Order or a Guide Processing an Order or a Guide The development process for Orders and Guides (Text version available here) Cancelling a Directive New

  17. Directives Tools - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directives Tools by Website Administrator Title Author Type Modified Processing a Policy or Notice Website Administrator Page Feb 26, 2014 09:17 AM Types of Directives Website Administrator Page Jan 10, 2014 10:16 AM Crosswalk of Directives Numbering System Website Administrator File Mar 26, 2014 01:41 PM Directives Templates Website Administrator Page Oct 24, 2016 04:02 PM Implementation Plan Template Website Administrator File Jan 10, 2014 01:20 PM Directives Certification Letter Website

  18. Departmental Directives Program

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-08-16

    The Order is the primary directive for administering the Department's directives Program. Cancels: DOE O 251.1A

  19. Directives Help - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Help by Website Administrator All DOE directives are available through this site. While it may seem overwhelming, given the number of documents, we have provided a number of ways in which you may get to the information you need. Navigating the DOE Directives, Delegations, and Requirements Portal A guide for using the new portal is available here. Navigation Tools The links at the top of the page will take you to the major elements of the site--directives, delegations and requirements. The

  20. Directives Templates - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Templates by Website Administrator Directives Program document content and format Directives Templates Justification Memoranda Per Secretarial Memo, Enterprise Risk Management (ERM) Framework for Directives, dated July 9, 2012, by September 1, 2012, all Justification Memoranda (JM) must be accompanied by a document reflecting an analysis using the ERM framework. Until this is incorporated into the JM it is recommended that all writers include the risk assessment tool below as an attachment for

  1. Laboratory Directed Research and Development - DOE Directives...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2C, Laboratory Directed Research and Development by Russell Ames Functional areas: Energy Research & Technology To establish Department of Energy (DOE) requirements for laboratory...

  2. Directives Requiring Additional Documentation - DOE Directives,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Delegations, and Requirements Requiring Additional Documentation by Website Administrator PDF document icon DirectivesRequiringAdditionalDocumentation (1).pdf - PDF document, 35 KB (36219

  3. Directives Quarterly Updates

    Directives, Delegations, and Requirements [Office of Management (MA)]

    Listings of new Justification Memoranda and new or revised Directives that have been posted to the DOE Directives, Delegations, and Requirements Portal. Updated quarterly.

  4. direct_deposit_111609

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    PROTECT YOUR BANKING INFORMATION: DO NOT complete this form until you are ready to submit it to the Payroll Department. DIRECT DEPOSIT REQUEST Directions: 1. Provide required information neatly, legibly; 2. If Checking Account Direct Deposit, include a voided check. a. DO NOT submit a deposit slip! 3. If Savings Account Direct Deposit, include a copy of savings card. 4. Sign this form; 5. Inter-office mail it to Craft Payroll at "P238." DIRECT DEPOSITION AUTHORIZATION I hereby

  5. Buckman Direct Diversion Project

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Buckman Direct Diversion Project Buckman Direct Diversion Project This project takes surface water from the Rio Grande, and then treats and distributes these waters to the city and county of Santa Fe through their drinking water distribution systems. August 1, 2013 Water flumes at Buckman Direct Diversion Project Water flumes at Buckman Direct Diversion Project The City of Santa Fe and Santa Fe County completed the construction of the Buckman Direct Diversion (BDD) Project in December 2010. The

  6. Departmental Directives Program Manual - DOE Directives, Delegations...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    M 251.1-1B, Departmental Directives Program Manual by Website Administrator Functional areas: Information Technology, The Manual supplements DOE O 251.1B. Cancels DOE M 251.1-1A....

  7. Directives Certification Letter - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directives & Documents Directives & Documents Policy & Guidance Policy & Guidance contains Project Management related orders, guides, handbooks, templates, standard operating procedures, and industry standards that allow Federal Project Directors and project teams to comply with applicable laws and regulations while putting in place most effective project managemetn practices that increase probability of project success. Proceed to Policy & Guidance >> Publications

  8. Directional recoil rates for WIMP direct detection

    SciTech Connect (OSTI)

    Alenazi, Moqbil S.; Gondolo, Paolo [Department of Physics, University of Utah, 115 S 1400 E Rm 201, Salt Lake City, Utah 84112-0830 (United States)

    2008-02-15

    New techniques for the laboratory direct detection of dark matter weakly interacting massive particles (WIMPs) are sensitive to the recoil direction of the struck nuclei. We compute and compare the directional recoil rates dR/dcos{theta} (where {theta} is the angle measured from a reference direction in the sky) for several WIMP velocity distributions including the standard dark halo and anisotropic models such as Sikivie's late-infall halo model and logarithmic-ellipsoidal models. Since some detectors may be unable to distinguish the beginning of the recoil track from its end (lack of head-tail discrimination), we introduce a folded directional recoil rate dR/d|cos{theta}|, where |cos{theta}| does not distinguish the head from the tail of the track. We compute the CS{sub 2} and CF{sub 4} exposures required to distinguish a signal from an isotropic background noise, and find that dR/d|cos{theta}| is effective for the standard dark halo and some but not all anisotropic models.

  9. Direct/Indirect Costs

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    This chapter provides recommended categories for direct and indirect elements developed by the Committee for Cost Methods Development (CCMD) and describes various estimating techniques for direct and indirect costs.

  10. Directions - 88-Inch Cyclotron

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directions The Laboratory is on the hillside directly above the campus of the University of California at Berkeley. Our address is 1 Cyclotron Rd. Bldg. 88, Berkeley, CA 94720. To...

  11. Directives System Manual

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-01-30

    This Manual provides detailed requirements to supplement DOE O 251.1A, Directives System, dated 1-30-98.

  12. Direct process for explosives

    DOE Patents [OSTI]

    Akst, I.B.; Stinecipher, M.M.

    1982-10-12

    A direct process of making ethylenediamine dinitrate through the reaction of ethylenediamine and ammonium nitrate is described.

  13. About Direct Current

    Energy.gov [DOE]

    Learn about Direct Current -- a podcast about the energy that lights our homes, powers our lives and shapes our world.

  14. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    https://www.directives.doe.gov/directives/directives July 2013 DOE O 243.1B Admin Chg 1, Records Management Program - The order sets forth requirements and responsibilities for creating and preserving records of DOE organization, functions, policies, decisions, procedures, and essential transactions and information necessary to protect the legal and financial rights of the Government and persons directly affected by DOE activities. Cancels DOE O 243.1A and DOE O 243.2. Admin Chg 1, dated

  15. Discovery of a Stellar Overdensity in Eridanus-Phoenix in the Dark Energy Survey

    SciTech Connect (OSTI)

    Li, T.S.; et al.

    2015-09-14

    We report the discovery of an excess of main sequence turn-off stars in the direction of the constellations of Eridanus and Phoenix from the first year data of the Dark Energy Survey (DES). The Eridanus-Phoenix (EriPhe) overdensity is centered around l~285 deg and b~-60 deg and spans at least 30 deg in longitude and 10 deg in latitude. The Poisson significance of the detection is at least 9 sigma. The stellar population in the overdense region is similar in brightness and color to that of the nearby globular cluster NGC 1261, indicating that the heliocentric distance of EriPhe is about d~16 kpc. The extent of EriPhe in projection is therefore at least ~4 kpc by ~3 kpc. On the sky, this overdensity is located between NGC 1261 and a new stellar stream discovered by DES at a similar heliocentric distance, the so-called Phoenix Stream. Given their similar distance and proximity to each other, it is possible that these three structures may be kinematically associated. Alternatively, the EriPhe overdensity is morphologically similar to the Virgo overdensity and the Hercules-Aquila cloud, which also lie at a similar Galactocentric distance. These three overdensities lie along a polar plane separated by ~120 deg and may share a common origin. Spectroscopic follow-up observations of the stars in EriPhe are required to fully understand the nature of this overdensity.

  16. Discovery of a stellar overdensity in Eridanus-Phoenix in the dark energy survey

    DOE PAGES-Beta [OSTI]

    Li, T. S.; Balbinot, E.; Mondrik, N.; Marshall, J. L.; Yanny, B.; Bechtol, K.; Drlica-Wagner, A.; Oscar, D.; Santiago, B.; Simon, J. D.; et al

    2016-01-27

    We report the discovery of an excess of main sequence turn-off stars in the direction of the constellations of Eridanus and Phoenix from the first year data of the Dark Energy Survey (DES). The Eridanus-Phoenix (EriPhe) overdensity is centered around l~285 deg and b~-60 deg and spans at least 30 deg in longitude and 10 deg in latitude. The Poisson significance of the detection is at least 9 sigma. The stellar population in the overdense region is similar in brightness and color to that of the nearby globular cluster NGC 1261, indicating that the heliocentric distance of EriPhe is aboutmore » d~16 kpc. The extent of EriPhe in projection is therefore at least ~4 kpc by ~3 kpc. On the sky, this overdensity is located between NGC 1261 and a new stellar stream discovered by DES at a similar heliocentric distance, the so-called Phoenix Stream. Given their similar distance and proximity to each other, it is possible that these three structures may be kinematically associated. Alternatively, the EriPhe overdensity is morphologically similar to the Virgo overdensity and the Hercules-Aquila cloud, which also lie at a similar Galactocentric distance. These three overdensities lie along a polar plane separated by ~120 deg and may share a common origin. Spectroscopic follow-up observations of the stars in EriPhe are required to fully understand the nature of this overdensity.« less

  17. Departmental Directives Program

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-09-10

    To define requirements and responsibilities for implementing the Department of Energy (DOE) Directives Program in support of the Secretary's memorandum of September 10, 2007, Principles Governing Departmental Directives. See also the current list of Directives Requiring Further Documentation, as required by Appendix D of this Order. Supersedes DOE P 251.1A, DOE O 251.1B, DOE M 251.1-1B.

  18. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Management's home page for Directives at https://www.directives.doe.gov/directives APRIL 2015 DOE O 325.2, Position Management and Classification The order establishes departmental requirements and responsibilities for classifying positions using general schedule (GS) and federal wage system (FWS) standards and for developing and administering a sound position management and classification program within the Department. Cancels Chapter VII of DOE O 320.1. DOE G 444.1-1, Guide on Preventing and

  19. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    https://www.directives.doe.gov/directives/directives October 2013 DOE O 472.2 Admin Chg 1, Personnel Security - The order establishes requirements that will enable DOE to operate a successful, efficient, cost-effective personnel security program that will ensure accurate, timely and equitable determinations of individuals' eligibility for access to classified information and Special Nuclear Material (SNM). Admin Chg 1, 10-8-13 clarifies ambiguities and updates reference citations. November 2013

  20. Direct-fired biomass

    SciTech Connect (OSTI)

    None, None

    2009-01-18

    The direct-fired biomass section of the Renewable Energy Technology Characterizations describes the technical and economic status of this emerging renewable energy option for electricity supply.

  1. Cancellation of Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    Effective immediately the following Department of Energy directive is canceled. DOE M 452.2-2, Nuclear Explosive Safety Evaluation Processes, dated 04-14-2009.

  2. Cancellation of Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2016-05-26

    Effective immediately the following Department of Energy directive is canceled: DOE P 111.1, Departmental Organization Management System, dated 08-27-96.

  3. BACnet's Future Directions

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and building controllers BACnet International has developed and deployed a BACnet ... technologies. Future Directions Smart Grid Cyber- Security Moving Forward Integration

  4. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The following new and revised Directives are available over the Internet on the Office of Management's home page for Directives at: https://www.directives.doe.gov/directives-browse#c8- operator=or&c10=&c12=&b_start=0 April 2014 DOE O 205.1B Chg 3, Department of Energy Cyber Security Program - The order sets forth requirements and responsibilities for a Departmental Cyber Security Program (CSP) that protects information and information systems for the Department of Energy (DOE). DOE

  5. Directives System Manual

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16

    This Manual provides detailed requirements to supplement DOE O 251.1, which establishes requirements for the development, coordination, and sunset review of DOE directives.

  6. Departmental Directives Program

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-10-16

    To establish directives as the primary means to set, communicate, and institutionalize policies, requirements, responsibilities, and procedures for Departmental elements and contractors.

  7. Departmental Directives System

    Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-04-07

    The order establishes the directives system to be used for publishing permanent and temporary directives issued by DOE Headquarters and addressed to Headquarters and/or field elements. Chg 1 dated 3-14-85. Cancels DOE 1321.1A.

  8. MONTICELLO NPL SITES

    Office of Legacy Management (LM)

    ... 37" 54' 00" N LONG: 109" 18' 00" w TEMPERATURE (oF)' RAIN (in), WIND SPEED (mph) HEAT COOL AVG MEAN DEG DEG WIND DOM DAY TEMP HIGH TIME LOW TIME DAYS DAYS RAIN SPEED HIGH TIME ...

  9. URANIUM-TITANIUM-NIOBIUM ALLOYS

    DOE Patents [OSTI]

    Greenberg, S.

    1961-06-27

    The patented alloy contains 3 wt.% Ti, 1.5 wt.% Nb, and 95.5 wt.% U. After quenching from 750 to 1000 deg C, the alloy is resistant to corrosion by water at 260 deg C.

  10. Idaho_SmithSwanLake

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Steve Smith, Swanlake Site 0603 Latitude: N. 42 deg. 29.804' Longitude: W. 112 deg. 01.934' Elevation: 6950' Anemometer Height: 20 Meters Placed in service: September 17, 2004...

  11. Utah_cm_smith

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Cindy and Mack Smith Site - Utah Wind Anemometer Loan Program Latitude: N. 37 deg. 44.034' Longitude: W. 109 deg. 17.28' Elevation: 6762' Placed in service: November 21, 2002...

  12. Idaho_SmithPhillips

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Power Smith Phillips Site - Idaho Wind Anemometer Loan Program Latitude: N. 42 deg. 23.34' Longitude: W. 112 deg. 12.6' Elevation: 4967' Placed in service: December 14, 2005...

  13. PowerPoint Presentation

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Space-Based Sun-Tracking Zenith-Viewing Cirrus (Ice Columns) Solar elevation 45 deg Sat depression 45 deg ... Analytic Size Inversion Power-Law Model Fit 10 +0 10 -2 10 -4 ...

  14. Highly tunable quantum Hall far-infrared photodetector by use of GaAs/Al{sub x}Ga{sub 1?x}As-graphene composite material

    SciTech Connect (OSTI)

    Tang, Chiu-Chun [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Ling, D. C. [Department of Physics, Tamkang University, Tamsui Dist., New Taipei City 25137, Taiwan (China); Chi, C. C.; Chen, Jeng-Chung [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Frontier Research Center on Fundamental and Applied Sciences of Matters, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2014-11-03

    We have developed a highly tunable, narrow band far-infrared (FIR) photodetector which utilizes the characteristic merits of graphene and two-dimensional electron gas (2DEG) in GaAs/Al{sub x}Ga{sub 1?x}As heterostructure in the Quantum Hall states (QHS). The heterostructure surface is covered with chemical vapor-deposited graphene, which functions as a transparent top-gate to vary the electron density of the 2DEG. FIR response observed in the vicinity of integer QH regime can be effectively tuned in a wide range of 27102?cm{sup ?1} with a bias voltage less than ?1?V. In addition, we have found that the presence of graphene can genuinely modulate the photoresponse. Our results demonstrate a promising direction for realizing a tunable long-wavelength FIR detector using QHS in GaAs 2DEG/ graphene composite material.

  15. Neutron production from the deuteron breakup reaction on deuterium

    SciTech Connect (OSTI)

    Borker, G.; Klein, H.; Mannhart, W. ); Cabral, S. )

    1990-11-01

    This paper investigates neutron production from the D(d,np) reaction for projectile energies between 5.34 and 13.29 MeV, and for emission angles of up to 15 deg. The breakup spectral angular cross section is deduced from neutron time-of-flight measurements normalized to the well-established D(d,n){sup 3} He angular cross section. The energy-integrated neutron yield from breakup reactions strongly increases with the projectile energy, and it exceeds the yield of monoenergetic neutrons at projectile energies of {approx} 9 MeV for neutron emission in a forward direction. The angular distributions behave very similarly for both reactions up to laboratory angles of 10 deg. In addition, it is possible to describe the breakup spectra for emission angles up to 10 deg with only one distribution unique to each energy when normalizing the spectra to the maximum energy of the breakup neutrons.

  16. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    https://www.directives.doe.gov/directives-browse#c8- operator=or&c10=&c12=&b_start=0 January 2014 DOE O 343.1, Federal Substance Abuse Testing Program - The Order establishes the requirements and responsibilities for the DOE Federal Substance Abuse Testing Program which covers drug and alcohol testing. Cancels DOE O 3792.3 Chg 1 February 2014 There were no directives approved during this month. March 2014 DOE O 232.2 Admin Chg 1, Occurrence Reporting and Processing of Operations

  17. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    home page for Directives at: https://www.directives.doe.gov/directives- browse#c8-operator=or&c10=&c12=&b_start=0 October 2014 DOE O 475.2B, Identifying Classified Information - To establish the program to identify information classified under the Atomic Energy Act [Restricted Data (RD), Formerly Restricted Data (FRD), and Transclassified Foreign Nuclear Information (TFNI)] or Executive Order (E.O.) 13526 [National Security Information (NSI)], so that it can be protected against

  18. Building America FY14 Project Matrix - by Research Team

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ARBI (DEG) Ducts in Condioned Space & High R-value Wall Measure Research New All Thermal Enclosure All ARBI (DEG) Field Trial of an Aerosol-Based Envelope Sealing Technology on a Production Scale Measure Research Both All Thermal Enclosure All All All All All ARBI (DEG) Reduced Recirculation Losses in Multi-Family Solar Water Heating Applications Measure Research Both MF Efficient Water Heating All ARBI (DEG) Evaluation of HPWH Ducting Kit Benefits in a Hot- Dry Climate Measure Research Both

  19. ARM - Datastreams - pars2

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Raw drop size distribution Counts rawspectrum ( time, particlesize, rawfallvelocity ) Temperature in sensor degC sensortemperature ( time ) Sensor voltage volt ...

  20. ARM - Datastreams - mwr3c

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    kPa surfacepressure ( time ) Ambient surface relative humidity % surfacerelativehumidity ( time ) Ambient surface absolute temperature degC surfacetemperature ( time )...

  1. ARM - Datastreams - mwrhf

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    flag None surfacerainflag ( time ) Ambient surface relative humidity % surfacerelativehumidity ( time ) Ambient surface temperature degC surfacetemperature ( time ) Microwave...

  2. AISI direct steelmaking program

    SciTech Connect (OSTI)

    Aukrust, E.

    1991-01-09

    AISI with co-funding from DOE has initiated a research and development program aimed at the development of a new process for direct steelmaking, and the program is discussed in this document. The project is expected to cost about $30 million over a three-year period, with the government providing approximately 77 percent of the funds and AISI the balance. In contrast to current steelmaking processes which are largely open and batch, the direct steelmaking process would be closed and continuous. Further, it would use coal directly, thereby avoiding the need for coke ovens. The second year of the Direct Steelmaking Program (November 29, 1989, through November 28, 1990) was a year of significant accomplishment. The various research programs proceeded essentially on schedule and the pilot plant, the centerpiece of the program, was completed about three months behind schedule but began operation in almost a picture-perfect manner. This report presents the last years accomplishments.

  3. Departmental Directives Program

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-08-13

    The order establishes directives as the primary means to set, communicate, and institutionalize policies, requirements, responsibilities, and procedures for Departmental elements and contractors. The second draft is being submitted for review owing to extensive revisions to the first draft.

  4. Direct nuclear pumped laser

    DOE Patents [OSTI]

    Miley, George H.; Wells, William E.; DeYoung, Russell J.

    1978-01-01

    There is provided a direct nuclear pumped gas laser in which the lasing mechanism is collisional radiated recombination of ions. The gas laser active medium is a mixture of the gases, with one example being neon and nitrogen.

  5. Refrigerant directly cooled capacitors

    SciTech Connect (OSTI)

    Hsu, John S.; Seiber, Larry E.; Marlino, Laura D.; Ayers, Curtis W.

    2007-09-11

    The invention is a direct contact refrigerant cooling system using a refrigerant floating loop having a refrigerant and refrigeration devices. The cooling system has at least one hermetic container disposed in the refrigerant floating loop. The hermetic container has at least one electronic component selected from the group consisting of capacitors, power electronic switches and gating signal module. The refrigerant is in direct contact with the electronic component.

  6. Highly directional thermal emitter

    DOE Patents [OSTI]

    Ribaudo, Troy; Shaner, Eric A; Davids, Paul; Peters, David W

    2015-03-24

    A highly directional thermal emitter device comprises a two-dimensional periodic array of heavily doped semiconductor structures on a surface of a substrate. The array provides a highly directional thermal emission at a peak wavelength between 3 and 15 microns when the array is heated. For example, highly doped silicon (HDSi) with a plasma frequency in the mid-wave infrared was used to fabricate nearly perfect absorbing two-dimensional gratings structures that function as highly directional thermal radiators. The absorption and emission characteristics of the HDSi devices possessed a high degree of angular dependence for infrared absorption in the 10-12 micron range, while maintaining high reflectivity of solar radiation (.about.64%) at large incidence angles.

  7. Direct conversion technology

    SciTech Connect (OSTI)

    Massier, P.F.; Back, L.H.; Ryan, M.A.; Fabris, G.

    1992-01-07

    The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC) and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1, 1991 through December 31, 1991. Research on AMTEC and on LMMHD was initiated during October 1987. Reports prepared on previous occasions (Refs. 1--5) contain descriptive and performance discussions of the following direct conversion concepts: thermoelectric, pyroelectric, thermionic, thermophotovoltaic, thermoacoustic, thermomagnetic, thermoelastic (Nitionol heat engine); and also, more complete descriptive discussions of AMTEC and LMMHD systems.

  8. Direct Conversion Technology

    SciTech Connect (OSTI)

    Back, L.H.; Fabris, G.; Ryan, M.A.

    1992-07-01

    The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct conversion systems that have potential application for energy conservation in the end-use sectors. Initially, two systems were selected for exploratory research and advanced development. These are Alkali Metal Thermal-to-Electric Converter (AMTEC) and Two-Phase Liquid Metal MD Generator (LMMHD). This report describes progress that has been made during the first six months of 1992 on research activities associated with these two systems. (GHH)

  9. Directed Quantum Chaos

    SciTech Connect (OSTI)

    Efetov, K.B. [Max-Planck Institut fuer Physik komplexer Systeme, Heisenbergstrasse 1, 70569 Stuttgart (Germany)] [Max-Planck Institut fuer Physik komplexer Systeme, Heisenbergstrasse 1, 70569 Stuttgart (Germany); [L.D. Landau Institute for Theoretical Physics, Moscow (Russia)

    1997-07-01

    Quantum disordered problems with a direction (imaginary vector potential) are discussed and mapped onto a supermatrix {sigma} model. It is argued that the 0D version of the {sigma} model may describe a broad class of phenomena that can be called directed quantum chaos. It is demonstrated by explicit calculations that these problems are equivalent to those of random asymmetric or non-Hermitian matrices. A joint probability of complex eigenvalues is obtained. The fraction of states with real eigenvalues proves to be always finite for time reversal invariant systems. {copyright} {ital 1997} {ital The American Physical Society}

  10. Directions & Maps

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Information » Directions & Maps Directions & Maps The Bradbury Science Museum is located in downtown Los Alamos at the corner of Central Avenue and 15th Street. Contact Us thumbnail of 1350 Central Avenue Bradbury Science Museum 1350 Central Avenue 505 667-4444 Email Where we're located Los Alamos (elevation 7,355 feet) is perched high atop the Pajarito Plateau in the Jemez Mountains, 35 miles northwest of Santa Fe. The Bradbury Science Museum is located in downtown Los Alamos at the

  11. Directives Quarterly Update

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    https://www.directives.doe.gov/directives-browse#c8- operator=or&c10=&c12=&b_start=0. July 2014 DOE G 415.1-1, Information Technology Project Execution Model Guide - The guide was developed in support of DOE O 415.1 to assist IT Program and Project Managers in effectively managing and applying sound project management to IT. DOE O 472.2 Chg 1, Personnel Security - The order establishes requirements that will enable DOE to operate a successful, efficient, cost-effective personnel

  12. ARM Surface Meteorology Systems Instrument Handbook

    SciTech Connect (OSTI)

    Ritsche, MT

    2011-03-08

    The ARM Surface Meteorology Systems consist mainly of conventional in situ sensors that obtain a defined “core” set of measurements. The core set of measurements is: Barometric Pressure (kPa), Temperature (°C), Relative Humidity (%), Arithmetic-Averaged Wind Speed (m/s), Vector-Averaged Wind Speed (m/s), and Vector-Averaged Wind Direction (deg).

  13. METHOD FOR OBTAINING PLUTONIUM METAL FROM ITS TRICHLORIDE

    DOE Patents [OSTI]

    Reavis, J.G.; Leary, J.A.; Maraman, W.J.

    1962-08-14

    A method was developed for obtaining plutonium metal by direct reduction of plutonium chloride, without the use of a booster, using calcium and lanthamum as a reductant, the said reduction being carried out at temperature in the range of 700 to 850 deg C and at about atmospheric pressure. (AEC)

  14. Directional gamma detector

    DOE Patents [OSTI]

    LeVert, Francis E.; Cox, Samson A.

    1981-01-01

    An improved directional gamma radiation detector has a collector sandwiched etween two layers of insulation of varying thicknesses. The collector and insulation layers are contained within an evacuated casing, or emitter, which releases electrons upon exposure to gamma radiation. Delayed electrons and electrons entering the collector at oblique angles are attenuated as they pass through the insulation layers on route to the collector.

  15. Direct fired heat exchanger

    DOE Patents [OSTI]

    Reimann, Robert C. (Lafayette, NY); Root, Richard A. (Spokane, WA)

    1986-01-01

    A gas-to-liquid heat exchanger system which transfers heat from a gas, generally the combustion gas of a direct-fired generator of an absorption machine, to a liquid, generally an absorbent solution. The heat exchanger system is in a counterflow fluid arrangement which creates a more efficient heat transfer.

  16. Extension of DOE Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-02-12

    The following directives are extended until 8-12-04. DOE N 205.2, Foreign National Access to DOE Cyber Systems, dated 11/1/99. DOE N 205.3, Password Generation, Protection, and Use, dated 11/23/99.

  17. Extension of DOE Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-02-24

    This Notice extends the following directives until 2/16/04: DOE N 205.2, Foreign National Access to DOE Cyber Systems, and DOE N 205.3, Password Generation, Protection, and Use, dated 11/23/99-7/1/00.

  18. Extension of DOE Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-08-12

    The following directives are extended until 8-12-05: DOE N 205.2, Foreign National Access to DOE Cyber Security Systems, dated 11-1-99 and DOE N 205.3, Password Generation, Protection, and Use, dated 11-23-99. No cancellations.

  19. Breakout Session -- TEC Direction

    Office of Environmental Management (EM)

    III: TEC Direction and Priorities Presented to: Transportation External Coordination Working Group Presented by: Alex Thrower Office of Logistics Management February 7, 2008 San Antonio, Texas 2 Topics of Discussion * Transportation External Coordination Working Group (TEC) charter and membership * Topic group functions * Meeting format 3 TEC Charter and Membership * Mission - TEC was formed in 1992 to improve coordination among the Department of Energy (DOE) and external groups interested in

  20. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-07-11

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  1. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2006-10-10

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  2. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

    2007-02-27

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  3. Direct drive wind turbine

    DOE Patents [OSTI]

    Bywaters, Garrett Lee; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

    2006-09-19

    A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

  4. Direct hydrocarbon fuel cells

    DOE Patents [OSTI]

    Barnett, Scott A.; Lai, Tammy; Liu, Jiang

    2010-05-04

    The direct electrochemical oxidation of hydrocarbons in solid oxide fuel cells, to generate greater power densities at lower temperatures without carbon deposition. The performance obtained is comparable to that of fuel cells used for hydrogen, and is achieved by using novel anode composites at low operating temperatures. Such solid oxide fuel cells, regardless of fuel source or operation, can be configured advantageously using the structural geometries of this invention.

  5. Letter: Direction and Guidance for Implementing Direct DOE Relationship &

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Funding for EMSSABs | Department of Energy Direction and Guidance for Implementing Direct DOE Relationship & Funding for EMSSABs Letter: Direction and Guidance for Implementing Direct DOE Relationship & Funding for EMSSABs From: Assistant Secretary, Jessie Hill Roberson (EM-11) To: Mr. Monte Wilson, Chair, INEEL Citizens Advisory Board This letter is in response to a November 21, 2003 letter regarding direction and guidance for implementing direct DOE relationship and funding for

  6. Direct Observation of the Transition from Indirect to Direct...

    Office of Scientific and Technical Information (OSTI)

    Direct Observation of the Transition from Indirect to Direct Bandgap in Atomically Thin ... Sponsoring Org: US DOE Office of Science (DOE SC) Country of Publication: United States ...

  7. Direct Observation of the Transition from Indirect to Direct...

    Office of Scientific and Technical Information (OSTI)

    Direct Observation of the Transition from Indirect to Direct Bandgap in Atomically Thin ... Visit OSTI to utilize additional information resources in energy science and technology. A ...

  8. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Site map An overview of the available content on this site. Keep the pointer still over an item for a few seconds to get its description. Directives Delegations Other Requirements Top 10 Directives Help Directives Tools RevCom

  9. Recent DOE Directives Changes

    Energy.gov [DOE]

    On September 1, 2009, the Department of Energy (DOE) manuals were revised and issued to correspond with the following recent Contractor Requirements Documents (CRDs) changes to the following Directives: DOE M 205.1-8 Administrative Change 1—Cyber Security Incident Management Manual; DOE M 205.1-7 Administrative Change 1—Security Controls for Unclassified Information Systems Manual; DOE M 205.1-6 Administrative Change 1—Media Sanitization Manual; DOE M 205.1-5 Administrative Change 1—Cyber Security Process Requirements Manual

  10. Extension of DOE Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-03-18

    The following directives are extended until 3-18-06: DOE N 205.8, Cyber Security Requirements for Wireless Devices and Information Systems, dated 2-11-04; DOE N 205.9, Certification and Accreditation Process for Information Systems Including National Security Systems, dated 02-19-04; DOE N 205.10, Cyber Security Requirements for Risk Management, dated 02-19-04; DOE N 205.11, Security Requirements for Remote Access to DOE and Applicable Contractor Information Technology Systems, dated 2-19-04. DOE N 205.12, Clearing, Sanitizing, and Destroying Information System Storage Media, Memory Devices, and Other Related Hardware, dated 2-19-04.

  11. Omni-directional railguns

    DOE Patents [OSTI]

    Shahinpoor, M.

    1995-07-25

    A device is disclosed for electromagnetically accelerating projectiles. The invention features two parallel conducting circular plates, a plurality of electrode connections to both upper and lower plates, a support base, and a projectile magazine. A projectile is spring-loaded into a firing position concentrically located between the parallel plates. A voltage source is applied to the plates to cause current to flow in directions defined by selectable, discrete electrode connections on both upper and lower plates. Repulsive Lorentz forces are generated to eject the projectile in a 360 degree range of fire. 4 figs.

  12. Omni-directional railguns

    DOE Patents [OSTI]

    Shahinpoor, Mohsen

    1995-01-01

    A device for electromagnetically accelerating projectiles. The invention features two parallel conducting circular plates, a plurality of electrode connections to both upper and lower plates, a support base, and a projectile magazine. A projectile is spring-loaded into a firing position concentrically located between the parallel plates. A voltage source is applied to the plates to cause current to flow in directions defined by selectable, discrete electrode connections on both upper and lower plates. Repulsive Lorentz forces are generated to eject the projectile in a 360 degree range of fire.

  13. Remote direct memory access

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.

    2012-12-11

    Methods, parallel computers, and computer program products are disclosed for remote direct memory access. Embodiments include transmitting, from an origin DMA engine on an origin compute node to a plurality target DMA engines on target compute nodes, a request to send message, the request to send message specifying a data to be transferred from the origin DMA engine to data storage on each target compute node; receiving, by each target DMA engine on each target compute node, the request to send message; preparing, by each target DMA engine, to store data according to the data storage reference and the data length, including assigning a base storage address for the data storage reference; sending, by one or more of the target DMA engines, an acknowledgment message acknowledging that all the target DMA engines are prepared to receive a data transmission from the origin DMA engine; receiving, by the origin DMA engine, the acknowledgement message from the one or more of the target DMA engines; and transferring, by the origin DMA engine, data to data storage on each of the target compute nodes according to the data storage reference using a single direct put operation.

  14. Direct Aerosol Forcing Uncertainty

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Mccomiskey, Allison

    2008-01-15

    Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement uncertainty in the quantities on which it depends: aerosol optical depth, single scattering albedo, asymmetry parameter, solar geometry, and surface albedo. Direct radiative forcing at the top of the atmosphere and at the surface as well as sensitivities, the changes in DRF in response to unit changes in individual aerosol or surface properties, are calculated at three locations representing distinct aerosol types and radiative environments. The uncertainty in DRF associated with a given property is computed as the product of the sensitivity and typical measurement uncertainty in the respective aerosol or surface property. Sensitivity and uncertainty values permit estimation of total uncertainty in calculated DRF and identification of properties that most limit accuracy in estimating forcing. Total uncertainties in modeled local diurnally averaged forcing range from 0.2 to 1.3 W m-2 (42 to 20%) depending on location (from tropical to polar sites), solar zenith angle, surface reflectance, aerosol type, and aerosol optical depth. The largest contributor to total uncertainty in DRF is usually single scattering albedo; however decreasing measurement uncertainties for any property would increase accuracy in DRF. Comparison of two radiative transfer models suggests the contribution of modeling error is small compared to the total uncertainty although comparable to uncertainty arising from some individual properties.

  15. Directed light fabrication

    SciTech Connect (OSTI)

    Lewis, G.K.; Nemec, R.; Milewski, J.; Thoma, D.J.; Cremers, D.; Barbe, M.

    1994-09-01

    Directed Light Fabrication (DLF) is a rapid prototyping process being developed at Los Alamos National Laboratory to fabricate metal components. This is done by fusing gas delivered metal powder particles in the focal zone of a laser beam that is, programmed to move along or across the part cross section. Fully dense metal is built up a layer at a time to form the desired part represented by a 3 dimensional solid model from CAD software. Machine ``tool paths`` are created from the solid model that command the movement and processing parameters specific to the DLF process so that the part can be built one layer at a time. The result is a fully dense, near net shape metal part that solidifies under rapid solidification conditions.

  16. Site directed recombination

    DOE Patents [OSTI]

    Jurka, Jerzy W.

    1997-01-01

    Enhanced homologous recombination is obtained by employing a consensus sequence which has been found to be associated with integration of repeat sequences, such as Alu and ID. The consensus sequence or sequence having a single transition mutation determines one site of a double break which allows for high efficiency of integration at the site. By introducing single or double stranded DNA having the consensus sequence flanking region joined to a sequence of interest, one can reproducibly direct integration of the sequence of interest at one or a limited number of sites. In this way, specific sites can be identified and homologous recombination achieved at the site by employing a second flanking sequence associated with a sequence proximal to the 3'-nick.

  17. DIRECT CURRENT ELECTROMAGNETIC PUMP

    DOE Patents [OSTI]

    Barnes, A.H.

    1957-11-01

    An improved d-c electromagnetic pump is presented in which the poles, and consequently the magetic gap at the poles, are tapered to be wider at the upstream end. In addition, the cross section of the tube carryiQ the liquid metal is tapered so that the velocity of the pumped liquid increases in the downstream direction at a rate such that the counter-induced voltage in the liquid metal remains constant as it traverses the region between the poles. This configuration compensates for the distortion of the magnetic field caused by the induced voltage that would otherwise result in the lowering of the pumping capacity. This improved electromagnetic pump as practical application in the pumping of liquid metal coolants for nuclear reactors where conventional positive displacement pumps have proved unsatisfactory due to the high temperatures and the corrosive properties of the liquid metals involved.

  18. New directions in mechanics

    DOE PAGES-Beta [OSTI]

    Kassner, Michael E.; Nemat-Nasser, Sia; Suo, Zhigang; Bao, Gang; Barbour, J. Charles; Brinson, L. Catherine; Espinosa, Horacio; Gao, Huajian; Granick, Steve; Gumbsch, Peter; et al

    2004-09-15

    The Division of Materials Sciences and Engineering of the US Department of Energy (DOE) sponsored a workshop to identify cutting-edge research needs and opportunities, enabled by the application of theoretical and applied mechanics. The workshop also included input from biochemical, surface science, and computational disciplines, on approaching scientific issues at the nanoscale, and the linkage of atomistic-scale with nano-, meso-, and continuum-scale mechanics. This paper is a summary of the outcome of the workshop, consisting of three main sections, each put together by a team of workshop participants. Section 1 addresses research opportunities that can be realized by the applicationmore » of mechanics fundamentals to the general area of self-assembly, directed self-assembly, and fluidics. Section 2 examines the role of mechanics in biological, bioinspired, and biohybrid material systems, closely relating to and complementing the material covered in Section 1. In this manner, it was made clear that mechanics plays a fundamental role in understanding the biological functions at all scales, in seeking to utilize biology and biological techniques to develop new materials and devices, and in the general area of bionanotechnology. While direct observational investigations are an essential ingredient of new discoveries and will continue to open new exciting research doors, it is the basic need for controlled experimentation and fundamentally- based modeling and computational simulations that will be truly empowered by a systematic use of the fundamentals of mechanics. Section 3 brings into focus new challenging issues in inelastic deformation and fracturing of materials that have emerged as a result of the development of nanodevices, biopolymers, and hybrid bio–abio systems. As a result, each section begins with some introductory overview comments, and then provides illustrative examples that were presented at the workshop and which are believed to highlight the

  19. The characterization of shape memory effect for low elastic modulus biomedical {beta}-type titanium alloy

    SciTech Connect (OSTI)

    Wang Liqiang; Lu Weijie; Qin Jining; Zhang Fan; Zhang Di

    2010-05-15

    This work investigates the textures of biomedical TiNbTaZr alloy rolled by 99% cold reduction ratios in thickness. The relationship between textures and superelasticity of the specimens treated at 873 K and 1223 K for 1.2 ks is studied. The microstructure of tensile specimen is investigated by transmission electron microscopy. Textures of cold-rolled and heat-treated specimens are studied. During unloading, the anisotropy of superelastic strain and pure elastic strain in the heat-treated specimens is observed. Superelastic strain along rolling direction and transverse direction is larger than those along 45 deg. from rolling direction while pure elastic strain shows the highest value along 45 deg. from rolling direction in the specimen treated at 873 K. For the specimen treated at 1223 K, higher pure elastic strain is obtained along rolling direction. The maximum recovered strain around 2.11% is obtained along rolling direction.

  20. Multiple direction vibration fixture

    DOE Patents [OSTI]

    Cericola, Fred; Doggett, James W.; Ernest, Terry L.; Priddy, Tommy G.

    1991-01-01

    An apparatus for simulating a rocket launch environment on a test item undergoing centrifuge testing by subjecting the item simultaneously or separately to vibration along an axis of centripetal force and along an axis perpendicular to the centripetal force axis. The apparatus includes a shaker motor supported by centrifuge arms and a right angle fixture pivotally connected to one of the shaker motor mounts. When the shaker motor vibrates along the centripetal force axis, the vibrations are imparted to a first side of the right angle fixture. The vibrations are transmitted 90 degrees around the pivot and are directed to a second side of the right angle fixture which imparts vibrations perpendicular to the centripetal force axis. The test item is in contact with a third side of the right angle fixture and receives both centripetal-force-axis vibrations and perpendicular axis vibrations simultaneously. A test item can be attached to the third side near the flexible coupling or near the air bag to obtain vibrations along the centripetal force axis or transverse to the centripetal force axis.

  1. BandelierDirections2011

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    a r k i n g M E R G E T o T o w n s it e D ia m o n d D ri v e To Sa n ta Fe T o J e m e z M ts . Co mm ut er Bu s Dr op Of f P a r k i n g M E R G E M E R G E T o T o w n s i t e D i a m o n d D r i v e T o J e m e z M t s . C o m m u t e r B u s D r o p O ff 4 To Valles Caldera National Preserve (12 miles), Jemez Springs (33 miles), and Albuquerque (88 miles) To Bandelier National Monument and White Rock DIRECTIONS TO BANDELIER 502 To Pajarito Ski Hill E A S T J E M E Z R O A D ( A L T E R N A

  2. Directional detector of gamma rays

    DOE Patents [OSTI]

    Cox, Samson A.; Levert, Francis E.

    1979-01-01

    A directional detector of gamma rays comprises a strip of an electrical cuctor of high atomic number backed with a strip of a second electrical conductor of low atomic number. These elements are enclosed within an electrical conductor that establishes an electrical ground, maintains a vacuum enclosure and screens out low-energy gamma rays. The detector exhibits a directional sensitivity marked by an increased output in the favored direction by a factor of ten over the output in the unfavored direction.

  3. DOE Directives | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Directives DOE Directives Directives are the Department of Energy's primary means to communicate and institutionalize directives and policies and to establish requirements, responsibilities, and procedures for Departmental elements and contractors. DOE O 413.3A - Program and Project Management for the Acquisition of Capital Assets DOE G 413.3-1 - Managing Design and Construction Using Systems Engineering for Use with DOE O 413.3A DOE G 413.3-2 - Quality Assurance Guide for Project Management

  4. Coherent radar estimates of average high-latitude ionospheric Joule heating

    SciTech Connect (OSTI)

    Kosch, M.J.; Nielsen, E.

    1995-07-01

    The Scandinavian Twin Auroral Radar Experiment (STARE) and Sweden and Britain Radar Experiment (SABRE) bistatic coherent radar systems have been employed to estimate the spatial and temporal variation of the ionospheric Joule heating in the combined geographic latitude range 63.8 deg - 72.6 deg (corrected geomagnetic latitude 61.5 deg - 69.3 deg) over Scandinavia. The 173 days of good observations with all four radars have been analyzed during the period 1982 to 1986 to estimate the average ionospheric electric field versus time and latitude. The AE dependent empirical model of ionospheric Pedersen conductivity of Spiro et al. (1982) has been used to calculate the Joule heating. The latitudinal and diurnal variation of Joule heating as well as the estimated mean hemispherical heating of 1.7 x 10(exp 11) W are in good agreement with earlier results. Average Joule heating was found to vary linearly with the AE, AU, and AL indices and as a second-order power law with Kp. The average Joule heating was also examined as a function of the direction and magnitude of the interplanetary magnetic field. It has been shown for the first time that the ionospheric electric field magnitude as well as the Joule heating increase with increasingly negative (southward) Bz.

  5. Text Canceling a Directive - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Requirements Canceling a Directive Processing a Policy or Notice Processing an Order or Guide Canceling a Directive by Website Administrator Process from justification memorandum through review to publication Justification Memorandum Office of Primary Interest (OPI) Creates a cancellation justification memorandum for non-NNSA element or cancellation justification memorandum for NNSA element to cancel a directive. Obtains the signature of the Secretarial Officer (SO) or designee on

  6. Directives for Review FY 2015 - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Requirements FY 2015 by Diane Johnson Excel spreadsheet icon DirectivesUpForReview-EOFY2015.xls - Excel spreadsheet, 64 KB (66048

  7. Crosswalk of Directives Numbering System - DOE Directives, Delegations,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and Requirements Crosswalk of Directives Numbering System by Website Administrator PDF document icon CROSWLK-3-27-2014.pdf - PDF document, 132 KB (135996 bytes

  8. Directives for Review FY 2015 - DOE Directives, Delegations,...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    FY 2015 by Diane Johnson Excel spreadsheet icon DirectivesUpForReview-EOFY2015.xls - Excel spreadsheet, 64 KB (66048

  9. Thermal stability of Al- and Zr-doped HfO{sub 2} thin films grown by direct current magnetron sputtering

    SciTech Connect (OSTI)

    Hong, Yeong-Eui; Kim, Yong-Seok; Do, Kihoon; Lee, Dongwon; Ko, Dae-Hong; Ku, Ja-Hum; Kim, Hyoungsub

    2005-09-15

    Ultrathin HfO{sub 2} dielectric films doped with Al and Zr were grown on p-type Si(100) substrates by dc magnetron sputtering, and their microstructural and electrical properties were examined. Compositions and chemical states of the dielectric films were analyzed by Rutherford backscattering spectrometry and x-ray photoelectron spectroscopy. The HfO{sub 2} films doped with Zr were crystallized even from the as-deposited state, however, the crystallization temperature of the HfO{sub 2} film doped with 16% Al{sub 2}O{sub 3} was delayed up to 900 deg. C. As the annealing temperature increases, high-resolution transmission electron microscopy analyses of all doped HfO{sub 2} films showed an increase of the interfacial layer thickness due to the diffusion of small partial pressure of oxygen in annealing ambient. Our results also showed that the addition of Al{sub 2}O{sub 3} to 14% is not useful for blocking the oxygen diffusion through the (HfO{sub 2}){sub 0.86}(Al{sub 2}O{sub 3}){sub 0.14} film. From the capacitance-voltage measurements, the dielectric constants of the Al- and Zr-doped HfO{sub 2} thin films were measured to be 18.7 and 7.6, respectively.

  10. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contact form Directives are the Department of Energy's primary means of establishing policies, requirements, responsibilities, and procedures for Departmental elements and contractors. Directives and Delegations Program Management Emily Stanton, (202) 287-5641 Directives Program Point of Contact Rachel Mack, (202) 287-6804 Delegations Program Point of Contact Gail Cephas,(202) 586-1049 Web Site Administration Technical Support Staff, (505) 663-1302 Fill in this form to contact us. Name Please

  11. DOE Directives | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Directives DOE Directives DOE Directives Initiated by the IG DOE O 221.3A, Establishment of Management Decisions on Office of Inspector General Reports - April 19, 2008 DOE O 221.1A, Reporting Fraud, Waste and Abuse to the Office of Inspector General - April 19, 2008 DOE O 221.2A, Cooperation with the Office of Inspector General - February 25, 2008 DOE O 224.2A, Auditing of Programs and Operations - November 9, 2007

  12. Canceling a Directive - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Canceling a Directive by Website Administrator Text version available here Document Actions Justification Memorandum Coordination: Review & Comment Final Concurrence Approval Impasse Publication Justification Memorandum Office of Primary Interest (OPI) Creates a cancellation justification memorandum for non-NNSA element or a cancellation justification memorandum for NNSA element to cancel a directive. Obtains the signature of the Secretarial Officer (SO) or designee on justification

  13. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    To establish Department of Energy (DOE) requirements for laboratory directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation.

  14. Laboratory Directed Research and Development

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Phone Book Jobs Laboratory Directorate - Strategic Planning Office Laboratory Directed Research and Development (LDRD) LBNL LDRD Program Guidelines LDRD FY 2017 Call for...

  15. Direct cooled power electronics substrate

    DOE Patents [OSTI]

    Wiles, Randy H [Powell, TN; Wereszczak, Andrew A [Oak Ridge, TN; Ayers, Curtis W. [Kingston, TN; Lowe, Kirk T. [Knoxville, TN

    2010-09-14

    The disclosure describes directly cooling a three-dimensional, direct metallization (DM) layer in a power electronics device. To enable sufficient cooling, coolant flow channels are formed within the ceramic substrate. The direct metallization layer (typically copper) may be bonded to the ceramic substrate, and semiconductor chips (such as IGBT and diodes) may be soldered or sintered onto the direct metallization layer to form a power electronics module. Multiple modules may be attached to cooling headers that provide in-flow and out-flow of coolant through the channels in the ceramic substrate. The modules and cooling header assembly are preferably sized to fit inside the core of a toroidal shaped capacitor.

  16. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    News Item Packaging and Transportation for Offsite Shipment of Materials of National Security Interest https:www.directives.doe.govinformational-purposes-only...

  17. SRNL Laboratory Directed Research & Development

    SciTech Connect (OSTI)

    Turick, Charles; Gaillard, Jay; Kaplan, Dan; Garcia-Diaz, Brenda; Colon-Mercado, Hector; Serkiz, Steven

    2015-11-02

    The Laboratory Directed Research and Development Program at Savannah River National Laboratory supports high quality research and development to further the mission of the Department of Energy.

  18. Program Direction and Analysis Jobs

    Office of Science (SC) [DOE]

    sc-4organizationprogram-direction-and-analysis Below is a list of currently open federal employment opportunities in the Office of Science. Prospective applicants should follow...

  19. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-04-30

    To establish Department of Energy (DOE) requirements for laboratory directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation

  20. Sunlight Direct | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Sector: Solar Product: Developed a system that tracks and concentrates solar energy for distributed power generation Website: www.sunlight-direct.com Coordinates: 33.0013938,...

  1. Efficient Placement of Directional Antennas

    SciTech Connect (OSTI)

    Pan, Feng; Kasiviswanathan, Shiva

    2010-09-20

    Directional antenna is an technology for the proliferation of wireless networks. In centralized wireless network, wireless devices communicate through base stations. Directed antennas are placed on base stations and form a backbone of communication. The communication between base stations and wireless devices can be interfered due to a large number of wireless device. Methodically positioning and orienting directed antennas can help to reduce the interference while saving energy. An integer linear programming is developed for siting and directing antennas on multiple base stations, and this formulation can be extended to model non-overlapping channels. Through the integer programming formulation, optimal antenna positions can be used to analyze the performance of directed antennas with different parameters like the number base stations and the number of non-overlapping channels.

  2. Directions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    From townsite South on Diamond Drive, across Omega Bridge, continue to Pajarito Road Left (east) on Pajarito Road for 12 mile Turn right at low wooden sign that says, "ESH-10 ...

  3. Directional fast-neutron detector

    DOE Patents [OSTI]

    Byrd, Roger C. (Albuquerque, NM)

    1994-01-01

    A plurality of omnidirectional radiation detectors are arranged in a close packed symmetrical pattern to form a segmented detector. The output radiation counts from these detectors are arithmetically combined to provide the direction of a source of incident radiation. Directionality is achieved without the use of shielding to provide collimation and background reduction effects. Indeed, output counts from paired detectors are simply subtracted to yield a vector direction toward the radiation source. The counts from all of the detectors can be combined to yield an output signal functionally related to the radiation source strength.

  4. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    www.directives.doe.gov Directives are the Department of Energy's primary means of establishing policies, requirements, responsibilities, and procedures for Departmental elements and contractors. New - DOE O 552.1A Chg 2 (Minor Revision), Travel and Policy Procedures https://www.directives.doe.gov/news/new-doe-0-552.1a-chg2-minrev The Order supplements the Federal Travel Regulation as principal source of policy for Federal employee travel and relocation and establishes DOE M 552.1-1A, U.S.

  5. Module bay with directed flow

    DOE Patents [OSTI]

    Torczynski, John R.

    2001-02-27

    A module bay requires less cleanroom airflow. A shaped gas inlet passage can allow cleanroom air into the module bay with flow velocity preferentially directed toward contaminant rich portions of a processing module in the module bay. Preferential gas flow direction can more efficiently purge contaminants from appropriate portions of the module bay, allowing a reduced cleanroom air flow rate for contaminant removal. A shelf extending from an air inlet slit in one wall of a module bay can direct air flowing therethrough toward contaminant-rich portions of the module bay, such as a junction between a lid and base of a processing module.

  6. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DOE Directives DOE Directives DOE Directives Initiated by the IG DOE O 221.3A, Establishment of Management Decisions on Office of Inspector General Reports - April 19, 2008 DOE O 221.1A, Reporting Fraud, Waste and Abuse to the Office of Inspector General - April 19, 2008 DOE O 221.2A, Cooperation with the Office of Inspector General - February 25, 2008 DOE O 224.2A, Auditing of Programs and Operations - November 9, 2007

    Views View Edit Select a document from the list below to leave feedback

  7. Nonimaging radiant energy direction device

    DOE Patents [OSTI]

    Winston, Roland

    1980-01-01

    A raidant energy nonimaging light direction device is provided. The device includes an energy transducer and a reflective wall whose contour is particularly determined with respect to the geometrical vector flux of a field associated with the transducer.

  8. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-08

    To establish the Department's, including the NNSA's, requirements for laboratory-directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation. Cancels DOE O 413.2. Canceled by DOE O 413.2B.

  9. Direct Current's Energy Unit Calculator

    Energy.gov [DOE]

    We recently released the second episode of Direct Current, our new Energy.gov podcast. Check out our newly proposed energy units -- burritos, Mt. Rushmore, a New York Minute and the Moon Landing!

  10. DRIFT COMPENSATED DIRECT COUPLED AMPLIFIER

    DOE Patents [OSTI]

    Windsor, A.A.

    1959-05-01

    An improved direct-coupled amplifier having zerolevel drift correction is described. The need for an auxiliary corrective-potential amplifier is eliminated thereby giving protection against overload saturation of the zero- level drift correcting circuit. (T.R.H.)

  11. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-04-19

    The Order establishes DOE requirements and responsibilities for laboratory directed research and development while providing laboratory directors with broad flexibility for program implementation. Cancels DOE O 413.2A. Admin Chg 1, 1-31-11.

  12. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-10-22

    To establish Department of Energy (DOE) requirements for laboratory directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation. Supersedes DOE O 413.2B.

  13. Breakout Session Summary TEC Directions

    Office of Environmental Management (EM)

    Direction and Priorities * TEC has come a long way * Topic groups are beneficial * Retooling TEC is necessary for improvement * Stakeholder input will be evaluated to identify a path forward TEC Direction and Priorities * Suggestions ranged from strategic to logistical - Scheduling (frequency, duration, timing) - Membership and participation - More inclusive planning (timing, agenda, plenary sessions) - Topic groups (new groups, re-racked groups) - New and improved mechanisms for communication

  14. DOE Directives | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Directives DOE Directives DOE O 414.1D, Quality Assurance DOE G 414.1-2B Admin Change 1, Quality Assurance Program Guide DOE O 221.1A, Reporting Fraud, Waste and Abuse to the Office of the Inspector General DOE O 232.2, Occurrence Reporting and Processing of Operations Information DOE O 440.1B, Worker Protection Program for DOE (Including the NNSA) Federal Employees

  15. Bioenergy Technologies Office New Directions | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Directions Bioenergy Technologies Office New Directions New Directions and New Business Opportunities for BETO Valerie Reed, Acting Director, BETO, U.S. Department of Energy ...

  16. Email Notification - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Final Directives Approved Justification Memos UNSUBSCRIBE Select notifications you are unsubscribing from New Draft Directives New Final Directives Approved Justification Memos ...

  17. Forward-angle neutron-proton scattering at 96 MeV

    SciTech Connect (OSTI)

    Johansson, C.; Blomgren, J.; Atac, A.; Bergenwall, B.; Hildebrand, A.; Klug, J.; Mermod, P.; Pomp, S.; Oesterlund, M.; Dangtip, S.; Tippawan, U.; Elmgren, K.; Jonsson, O.; Prokofiev, A.V.; Renberg, P.-U.; Nadel-Turonski, P.; Nilsson, L.; Olsson, N.

    2005-02-01

    The differential np scattering cross section has been measured at 96 MeV in the angular range {theta}{sub c.m.}=20 deg. -76 deg. Together with an earlier data set at the same energy, covering the angles {theta}{sub c.m.}=74 deg. -180 deg., a new data set has been formed in the angular range {theta}{sub c.m.}=20 deg. - 180 deg. This extended data set has been normalized to the experimental total np cross section, resulting in a renormalization of the earlier data of 0.7%, which is well within the reported normalization uncertainty for that experiment. A novel normalization technique has been investigated. The results on forward np scattering are in reasonable agreement with theory models and partial wave analyses and have been compared with data from the literature.

  18. Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S32750

    SciTech Connect (OSTI)

    Tan Hua; Jiang Yiming; Deng Bo; Sun Tao; Xu Juliang; Li Jin

    2009-09-15

    The pitting corrosion resistance of commercial super duplex stainless steels SAF2507 (UNS S32750) annealed at seven different temperatures ranging from 1030 deg. C to 1200 deg. C for 2 h has been investigated by means of potentiostatic critical pitting temperature. The microstructural evolution and pit morphologies of the specimens were studied through optical/scanning electron microscope. Increasing annealing temperature from 1030 deg. C to 1080 deg. C elevates the critical pitting temperature, whereas continuing to increase the annealing temperature to 1200 deg. C decreases the critical pitting temperature. The specimens annealed at 1080 deg. C for 2 h exhibit the best pitting corrosion resistance with the highest critical pitting temperature. The pit morphologies show that the pit initiation sites transfer from austenite phase to ferrite phase as the annealing temperature increases. The aforementioned results can be explained by the variation of pitting resistance equivalent number of ferrite and austenite phase as the annealing temperature changes.

  19. Synthesis and characterization of actinide nitrides

    SciTech Connect (OSTI)

    Jaques, Brian; Butt, Darryl P.; Marx, Brian M.; Hamdy, A.S.; Osterberg, Daniel; Balfour, Gordon

    2007-07-01

    A carbothermic reduction of the metal oxides in a hydrogen/nitrogen mixed gas stream prior to nitriding in a nitrogen gas stream was used to synthesize uranium nitride at 1500 deg. C, cerium nitride at 1400 deg. C, and dysprosium nitride at 1500 deg. C. Cerium nitride and dysprosium nitride were also synthesized via hydriding and nitriding the metal shavings at 900 deg. C and 1500 deg. C, respectively. Also, a novel ball-milling synthesis route was used to produce cerium nitride and dysprosium nitride from the metal shavings at room temperature. Dysprosium nitride was also produced by reacting the metal shavings in a high purity nitrogen gas stream at 1300 deg. C. All materials were characterized by phase analysis via X-ray diffraction. Only the high purity materials were further analyzed via chemical analysis to characterize the trace oxygen concentration. (authors)

  20. Property:Wave Direction | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Wave Basin + Uni-Directional + Lakefront Tow Tank + Uni-Directional + Los Angeles and Long Beach Harbors Model + Uni-Directional + M MHL 2D WindWave + Uni-Directional + MHL...

  1. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Merit Review 2014: Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine Development Advanced Gasoline Turbocharged Direct Injection (GTDI) ...

  2. Advanced Particulate Filter Technologies for Direct Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Particulate Filter Technologies for Direct Injection Gasoline Engine Applications Advanced Particulate Filter Technologies for Direct Injection Gasoline Engine Applications Specific ...

  3. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Turbocharged Direct Injection (GTDI) Engine Development Vehicle Technologies Office Merit Review 2014: Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine ...

  4. Optically Directed Assembly of Continuous Mesoscale Filaments...

    Office of Scientific and Technical Information (OSTI)

    Publisher's Accepted Manuscript: Optically Directed Assembly of Continuous Mesoscale Filaments Title: Optically Directed Assembly of Continuous Mesoscale Filaments Authors: Bahns, ...

  5. Photoelectrochemical based direct conversion systems

    SciTech Connect (OSTI)

    Kocha, S.; Arent, D.; Peterson, M.

    1995-09-01

    The goal of this research is to develop a stable, cost effective, photoelectrochemical based system that will split water upon illumination, producing hydrogen and oxygen directly, using sunlight as the only energy input. This type of direct conversion system combines a photovoltaic material and an electrolyzer into a single monolithic device. We report on our studies of two multifunction multiphoton photoelectrochemical devices, one based on the ternary semiconductor gallium indium phosphide, (GaInP{sub 2}), and the other one based on amorphous silicon carbide. We also report on our studies of the solid state surface treatment of GaInP{sub 2} as well as our continuing effort to develop synthetic techniques for the attachment of transition metal complexes to the surface of semiconductor electrodes. All our surface studies are directed at controlling the interface energetics and forming stable catalytic surfaces.

  6. The AISI direct steelmaking program

    SciTech Connect (OSTI)

    Aukrust, E. ); Downing, K.B. )

    1991-01-01

    After six months of operation of the pilot plant, the viability of in-bath smelting combined with a high level of post combustion has been demonstrated, and the opportunity exists for an early commercialization of the direct ironmaking part of the process while we continue to research direct steelmaking. The program should be of equal interest to integrated and electric furnace producers. Smelting of ore provides virgin iron units. Additionally, the process has the flexibility of melting scrap and varying the ore-to-scrap ratio over wide ranges. This process does not require coke, thus eliminating the cokemaking operation, a major source of environmental concern.

  7. Building America FY14 Projects by Building Type

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ducts in Condioned Space & High R-value Wall Measure Research New All Thermal Enclosure All ARBI (DEG) Field Trial of an Aerosol-Based Envelope Sealing Technology on a Production Scale Measure Research Both All Thermal Enclosure All All All All All ARBI (DEG) Evaluation of HPWH Ducting Kit Benefits in a Hot- Dry Climate Measure Research Both All Efficient Water Heating All ARBI (DEG) Challenge Home Production Builder Implementation Community Scale Verification 40% New All Integrated Design

  8. METHOD OF PRODUCING PLUTONIUM TETRAFLUORIDE

    DOE Patents [OSTI]

    Tolley, W.B.; Smith, R.C.

    1959-12-15

    A process is presented for preparing plutonium tetrafluoride from plutonium(IV) oxalate. The oxalate is dried and decomposed at about 300 deg C to the dioxide, mixed with ammonium bifluoride, and the mixture is heated to between 50 and 150 deg C whereby ammonium plutonium fluoride is formed. The ammonium plutonium fluoride is then heated to about 300 deg C for volatilization of ammonium fluoride. Both heating steps are preferably carried out in an inert atmosphere.

  9. Laboratory Directed Research and Development

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-04-19

    The order establishes DOE requirements for laboratory directed research and development (LDRD) while providing the laboratory director broad flexibility for program implementation. Cancels DOE O 413.3A. Admin Chg 1, dated 1-31-11, cancels DOE O 413.2B. Certified 7-14-2011.

  10. Direct flow crystal growth system

    DOE Patents [OSTI]

    Montgomery, Kenneth E.; Milanovich, Fred P.

    1992-01-01

    A crystal is grown in a constantly filtered solution which is flowed directly into the growing face of a crystal. In a continuous flow system, solution at its saturation temperature is removed from a crystal growth tank, heated above its saturation temperature, filtered, cooled back to its saturation temperature, and returned to the tank.

  11. Types of Directives - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Types of Directives by Website Administrator Policies establish high level expectations in the conduct of the Department's mission impacting two or more Departmental elements. Policies do not contain requirements. However, Orders and Notices that flow from Policies must be consistent with them. Orders establish management objectives and requirements and assign responsibilities for DOE Federal employees consistent with policy regulations. Requirements must be unique to DOE and must avoid

  12. Directives Review Board - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directives Review Board by Website Administrator Departmental Elements Oversight of Departmental Requirements Members Organizations Represented Ingrid Kolb, Chair Office of Management (MA) Office of the Chief Financial Officer (CF) Office of Congressional and Intergovernmental Affairs (CI) Office of Energy Policy and Systems Analysis (EPSA) Office of Inspector General (IG) Office of Intelligence and Counterintelligence (IN) Office of International Affairs (IA) Office of Public Affairs (PA)

  13. ARM - Datastreams - kazrspeccmaskhicopol

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ( range, bound ) Ship roll, axis along ship length, positive is port up deg roll ( time ) Radar Doppler Spectra 10 * log(signal power in milliwatts) spectra ( numspectra,...

  14. Ion implantation for manufacturing bent and periodically bent...

    Office of Scientific and Technical Information (OSTI)

    Galilei, University of Padova, Via Marzolo 8, 35131 Padova (Italy) Dipertimento di Economia e Tecnologia, Universit degli Studi della Repubblica di San Marino, Salita alla ...

  15. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Rutherford Appleton Laboratory, Chilton, Didcot, OXON OX11 0QX ; Dipartimento di Fisica E. Amaldi, Universita degli Studi Roma Tre, Via della Vasca Navale 84, 00146 Rome ...

  16. Volume Reflection Dependence of 400 GeV/c Protons on the Bent...

    Office of Scientific and Technical Information (OSTI)

    INFN Sezione di Ferrara, Dipartimento di Fisica, Universita di Ferrara Via Saragat 1, ... 06123 Perugia (Italy) Dipartimento di Fisica, Universita degli Studi di Perugia via ...

  17. Evidence of Luttinger-liquid behavior in one-dimensional dipolar...

    Office of Scientific and Technical Information (OSTI)

    Dipartimento di Fisica E. R. Caianiello and CNISM, Universita degli Studi di Salerno, ... DEMOCRITOS INFM-CNR and Dipartimento di Fisica Teorica, Universita Trieste, Trieste ...

  18. High-Efficiency Deflection of High-Energy Protons through Axial...

    Office of Scientific and Technical Information (OSTI)

    INFN Sezione di Ferrara, Dipartimento di Fisica, Universita di Ferrara, Via Saragat 1, ... degli Studi di Perugia, Dipartimento di Fisica, Via Pascoli, 06123 Perugia (Italy) INFN ...

  19. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... In general, we expected to probe typical van der Waals interactions, consisting of a ... ; Dipartimento di Chimica, Biologia e Biotecnologie, Universit degli Studi ...

  20. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Roncaratti, Luiz F. Dipartimento di Chimica, Biologia e Biotecnologie, Universit degli ... In general, we expected to probe typical van der Waals interactions, consisting of a ...

  1. High Energy Two-Body Deuteron Photodisintegration

    SciTech Connect (OSTI)

    Terburg, Bart

    1999-07-31

    The differential cross section for two­body deuteron photodisintegration was measured at photon energies between 0.8 and 4.0 GeV and center­of­mass angles theta_cm =37deg, 53deg, 70deg, and 90deg as part of CEBAF experiment E89­012. Constituent counting rules predict a scaling of this cross section at asymptotic energies. In previous experiments this scaling has surprisingly been observed at energies between 1.4 and 2.8 GeV at 90deg. The results from this experiment are in reasonable agreement with previous measurements at lower energies. The data at 70deg and 90deg show a constituent counting rule behavior up to 4.0 GeV photon energy. The 37deg and 53deg data do not agree with the constituent counting rule prediction. The new data are compared with a variety of theoretical models inspired by quantum chromodynamics (QCD) and traditional hadronic nuclear physics.

  2. The Microscopic Magnetic Properties of W-type Hexaferrite Powder Prepared by A Sol-Gel Route

    SciTech Connect (OSTI)

    Jotania, Rajshree; Chauhan, Chetna; Sharma, Pooja

    2010-12-01

    Magnetic particles of W-type barium-calcium hexaferrite (BaCa{sub 2}Fe{sub 16}O{sub 27}) have been synthesized using a Stearic acid gel route. The gel precursors were dried at 100 deg. C for 2 hrs and then calcinated at 650 deg. C, 750 deg. C, 850 deg. C and 950 deg. C for 4 hrs in a furnace and slowly cooled to room temperature in order to obtain barium-calcium hexaferrite particles. The microscopic magnetic properties of prepared samples studying using Moessbauer spectroscopy. Moessbauer spectra of all samples were recorded at room temperature. Mossbauer parameters like Isomer shift, Quadruple splitting etc. were calculated with respect to iron foil. Barium calcium hexaferrite samples heated at 650 deg. C, 750 deg. C, 850 deg. C show relaxation type Moessbauer spectra along with paramagnetic doublet. The intensity of paramagnetic doublet increases with temperature confirm the presence of ferrous ions in the samples, where as sample calcinated at 950 deg. C confirm the presence of ferrimagnetic phase with partial super paramagnetic nature of prepared hexaferrite sample.

  3. ARM - Datastreams - saszefilterbands

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    degC chillertemperature ( time ) Spectrometer internal clock ticks for InGaAs NIR spectrometer s clockticksnir ( time ) Spectrometer internal clock ticks for Si VIS ...

  4. PROCESS FOR MAKING URANIUM HEXAFLUORIDE

    DOE Patents [OSTI]

    Rosen, R.

    1959-07-14

    A process is described for producing uranium hexafluoride by reacting uranium hexachloride with hydrogen fluoride at a temperature below about 150 deg C, under anhydrous conditions.

  5. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... DEG also observed the construction process, completed testing, and collected cost data. ... exchange for providing site access for construction observation, diagnostic testing, ...

  6. PLUTONIUM ALLOYS

    DOE Patents [OSTI]

    Chynoweth, W.

    1959-06-16

    The preparation of low-melting-point plutonium alloys is described. In a MgO crucible Pu is placed on top of the lighter alloying metal (Fe, Co, or Ni) and the temperature raised to 1000 or 1200 deg C. Upon cooling, the alloy slug is broke out of the crucible. With 14 at. % Ni the m.p. is 465 deg C; with 9.5 at. % Fe the m.p. is 410 deg C; and with 12.0 at. % Co the m.p. is 405 deg C. (T.R.H.) l6262 l6263 ((((((((Abstract unscannable))))))))

  7. Center for Nanophase Materials Sciences (CNMS) - CNMS User Research

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    di Fisica "A. Volta", Universita degli Studi di Pavia, via Bassi 6, 27100 Pavia, Italy Department of Physics and Institute for Optical Sciences, University of Toronto, 60 St. ...

  8. Center for Nanophase Materials Sciences (CNMS) - CNMS Research

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    di Fisica "A. Volta", Universita degli Studi di Pavia, via Bassi 6, 27100 Pavia, Italy Department of Physics and Institute for Optical Sciences, University of Toronto, 60 St. ...

  9. Office of Wind and Hydropower Technologies Wind Energy Program...

    Energy.gov (indexed) [DOE]

    ... remote fisheries or hot water in remote cold ... shape change with water flow change. 2. ... of the DEG based on oscillator design 3. Galloping Hydroelectric Energy Extraction Device ...

  10. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... di Chimica, Biologia e Biotecnologie, Universit degli Studi di Perugia, 06123 Perugia (Italy) (1) Roncaratti, Luiz F. Dipartimento di Chimica, Biologia e Biotecnologie, ...

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Francesco, E-mail: francesco.tarantelli@unipg.it ; Dipartimento di Chimica, Biologia e Biotecnologie, Universit degli Studi di Perugia, via Elce di Sotto 8, I-06123 ...

  12. ARM - Datastreams - sashevis

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Collector internal dew point degC collectordewpoint ( time ) Collector internal relative humidity from TRH sensor % collectorrh ( time ) Collector internal temperature from TRH...

  13. ARM - Datastreams - sashenir

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Collector internal dew point degC collectordewpoint ( time ) Collector internal relative humidity from TRH sensor % collectorrh ( time ) Collector internal temperature from TRH...

  14. Age Hardening Kinetics in 7xxx Type (Al-Mg-Zn) Alloys

    SciTech Connect (OSTI)

    Vevecka-Priftaj, A.; Lamani, E.; Fjerdingen, J.; Langsrud, Y.; Gjoennes, J.; Hansen, V.

    2007-04-23

    Age hardening in industrial 7xxx alloys at the temperature 100 deg. and 150 deg. C up to 144 hrs, after solid solution treatments at 450 deg. and 550 deg. C, has been followed by measurements of Vickers hardness, scanning and transmission electron microscopy. The influence of silicon on phase and kinetic of age hardening zones and precipitates has been studied. High iron and silicon content increase the number of primary particle in the alloy. Size distribution of {eta}'-precipitates has been determined.

  15. Determining {gamma} from B{yields}{pi}{pi} Decays without the CP-Asymmetry C{sub {pi}}{sub {sup 0}}{sub {pi}}{sub {sup 0}}

    SciTech Connect (OSTI)

    Bauer, Christian W.; Rothstein, Ira Z.; Stewart, Iain W.

    2005-06-17

    Factorization based on the soft-collinear effective theory (SCET) can be used to reduce the number of hadronic parameters in an isospin analysis of B{yields}{pi}{pi} decays by one. This gives a theoretically precise method for determining the CP violating phase {gamma} by fitting to the B{yields}{pi}{pi} data without C{sub {pi}}{sub {sup 0}}{sub {pi}}{sub {sup 0}}. SCET predicts that {gamma} lies close to the isospin bounds. With the current world averages we find {gamma}=75 deg. {+-}2 deg.{sub -13deg.}{sup +9deg.}, where the uncertainties are theoretical, then experimental.

  16. CRYSTAL STRUCTURE OF OXIDES AND THEIR NEUTRON IRRADIATION BEHAVIOR...

    Office of Scientific and Technical Information (OSTI)

    CRYSTAL STRUCTURE OF OXIDES AND THEIR NEUTRON IRRADIATION BEHAVIOR AT 80 DEG C Citation ... Country of Publication: Country unknownCode not available Language: French Subject: ...

  17. University of Kansas: Technical Design Report

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Coursework in structural analysis and FEA Business plan development Blade ... Angle of Attack, (deg) Lift Coefficient, C l Figure 2.1: SG6040 Lift Coefficient Data 2 ...

  18. Property:Water Column Location | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    using this property. M MHK Technologies14 MW OTECPOWER + unknown MHK TechnologiesOTEC + Tropical oceans with a 20 deg C temperature difference between seawater that is at...

  19. Building America FY14 Projects by Technology

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... 40% New All Integrated Design (& WH packages) CA ARBI (DEG) Retrofit on Purchase & Data Mining Community Scale Verification Retrofit SF Integrated Design (& WH packages) All All ...

  20. Ultra-wideband directional sampler

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-05-14

    The Ultra-Wideband (UWB) Directional Sampler is a four port device that combines the function of a directional coupler with a high speed sampler. Two of the four ports operate at a high sub-nanosecond speed, in ``real time``, and the other two ports operate at a slow millisecond-speed, in ``equivalent time``. A signal flowing inbound to either of the high speed ports is sampled and coupled, in equivalent time, to the adjacent equivalent time port while being isolated from the opposite equivalent time port. A primary application is for a time domain reflectometry (TDR) situation where the reflected pulse returns while the outbound pulse is still being transmitted, such as when the reflecting discontinuity is very close to the TDR apparatus. 3 figs.

  1. Ultra-wideband directional sampler

    DOE Patents [OSTI]

    McEwan, Thomas E.

    1996-01-01

    The Ultra-Wideband (UWB) Directional Sampler is a four port device that combines the function of a directional coupler with a high speed sampler. Two of the four ports operate at a high sub-nanosecond speed, in "real time", and the other two ports operate at a slow millisecond-speed, in "equivalent time". A signal flowing inbound to either of the high speed ports is sampled and coupled, in equivalent time, to the adjacent equivalent time port while being isolated from the opposite equivalent time port. A primary application is for a time domain reflectometry (TDR) situation where the reflected pulse returns while the outbound pulse is still being transmitted, such as when the reflecting discontinuity is very close to the TDR apparatus.

  2. OM300 Direction Drilling Module

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    MacGugan, Doug

    2013-08-22

    OM300 – Geothermal Direction Drilling Navigation Tool: Design and produce a prototype directional drilling navigation tool capable of high temperature operation in geothermal drilling Accuracies of 0.1° Inclination and Tool Face, 0.5° Azimuth Environmental Ruggedness typical of existing oil/gas drilling Multiple Selectable Sensor Ranges High accuracy for navigation, low bandwidth High G-range & bandwidth for Stick-Slip and Chirp detection Selectable serial data communications Reduce cost of drilling in high temperature Geothermal reservoirs Innovative aspects of project Honeywell MEMS* Vibrating Beam Accelerometers (VBA) APS Flux-gate Magnetometers Honeywell Silicon-On-Insulator (SOI) High-temperature electronics Rugged High-temperature capable package and assembly process

  3. Program Peer Review New Directions

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PROGRAM PEER REVIEW Bioenergy Technologies Office New Directions July 31, 2013 Valerie Reed Acting Director 2 | Bioenergy Technologies Office Outline * Incubator * Waste-to-Energy * Carbon Fiber * Natural Gas 3 | Bioenergy Technologies Office EERE Incubator: Vision of the Program Purpose: To provide a dedicated, annual funding mechanism for each EERE technology office for innovative technologies and solutions that are not represented in a significant way in the Office's existing Multi-Year

  4. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Did you not find what you were looking for? Try the Advanced Search to refine your search. Search results 0 items matching your search terms. Filter the results. Item type Select All/None Collection Delegation Directive Other Policy Page File Form Folder Link News Item Collection (old-style) DoxFile New items since Yesterday Last week Last month Ever Search Sort by relevance * date (newest first) * alphabetically No results were found.

  5. DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Website Administrator The DOE Directives, Regulations, and Requirements Portal is operated by Doxcelerate Corporation for the Office of Information Resources (MA-90). Location: Santa Fe, NM, USA Author's external home page... Select a document from the list below to leave feedback for the writer. For contact information, use the DOE Phonebook. Latest content created by this user May 22, 2015 Recently Approved Justification Memoranda May 20, 2015 DRAFT - DOE O 331.1D, Employee Performance and

  6. Direct search for dark matter

    SciTech Connect (OSTI)

    Yoo, Jonghee; /Fermilab

    2009-12-01

    Dark matter is hypothetical matter which does not interact with electromagnetic radiation. The existence of dark matter is only inferred from gravitational effects of astrophysical observations to explain the missing mass component of the Universe. Weakly Interacting Massive Particles are currently the most popular candidate to explain the missing mass component. I review the current status of experimental searches of dark matter through direct detection using terrestrial detectors.

  7. AUTOMATIC AIR BURST DIRECTION FINDER

    DOE Patents [OSTI]

    Allard, G.A.

    1952-01-31

    This patent application describes an atomic explosion direction indicator comprising a geometric heat-scorchable indicating surface symmetrical about an axis, elevation and azimuth markings on the heat scorchable surface, and an indicating rod at the axis of said surface arranged to cast a shadow hereon, whereby heat from an atomic explosion will scorch a pattern on said surface indicative of the azimuth and elevation of said explosion.

  8. Wellbore inertial directional surveying system

    DOE Patents [OSTI]

    Andreas, Ronald D.; Heck, G. Michael; Kohler, Stewart M.; Watts, Alfred C.

    1991-01-01

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single off-shore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on the electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block aboutthe gimbal axis. Angular rates of the sensor block about axes which are perpendicular to the gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and anular rate information. Kalman estimation techniques are used to compensate for system errors.

  9. Wellbore inertial directional surveying system

    DOE Patents [OSTI]

    Andreas, R.D.; Heck, G.M.; Kohler, S.M.; Watts, A.C.

    1982-09-08

    A wellbore inertial directional surveying system for providing a complete directional survey of an oil or gas well borehole to determine the displacement in all three directions of the borehole path relative to the well head at the surface. The information generated by the present invention is especially useful when numerous wells are drilled to different geographical targets from a single offshore platform. Accurate knowledge of the path of the borehole allows proper well spacing and provides assurance that target formations are reached. The tool is lowered down into a borehole on an electrical cable. A computer positioned on the surface communicates with the tool via the cable. The tool contains a sensor block which is supported on a single gimbal, the rotation axis of which is aligned with the cylinder axis of the tool and, correspondingly, the borehole. The gyroscope measurement of the sensor block rotation is used in a null-seeking servo loop which essentially prevents rotation of the sensor block about the gimbal axis. Angular rates of the sensor block about axes which are perpendicular to te gimbal axis are measured by gyroscopes in a manner similar to a strapped-down arrangement. Three accelerometers provide acceleration information as the tool is lowered within the borehole. The uphole computer derives position information based upon acceleration information and angular rate information. Kalman estimation techniques are used to compensate for system errors. 25 figures.

  10. BNL Direct Wind Superconducting Magnets

    SciTech Connect (OSTI)

    Parker, B.; Anerella, M.; Escallier, J.; Ghosh, A.; Jain, A.; Marone, A.; Muratore, A.; Wanderer, P.

    2011-09-12

    BNL developed Direct Wind magnet technology is used to create a variety of complex multi-functional multi-layer superconducting coil structures without the need for creating custom production tooling and fixturing for each new project. Our Direct Wind process naturally integrates prestress into the coil structure so external coil collars and yokes are not needed; the final coil package transverse size can then be very compact. Direct Wind magnets are produced with very good field quality via corrections applied during the course of coil winding. The HERA-II and BEPC-II Interaction Region (IR) magnet, J-PARC corrector and Alpha antihydrogen magnetic trap magnets and our BTeV corrector magnet design are discussed here along with a full length ILC IR prototype magnet presently in production and the coils that were wound for an ATF2 upgrade at KEK. A new IR septum magnet design concept for a 6.2 T combined-function IR magnet for eRHIC, a future RHIC upgrade, is introduced here.

  11. Enterprise Risk Management (ERM) Framework for Directives

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-09-30

    Explains the new ERM framework for developing, revising, and reviewing directives. This memo directs the Office of Management to institutionalize ERM into the directives process no later than September 30, 2012.

  12. Home - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) - all webpages

    Personal tools Log in Site Map | Contact Us | Help U.S. Department of Energy Office of Management Current Documents Archived Documents Entire Site Search Site Search only in current section Advanced Search Home Directives Delegations Other Requirements RevCom DPC Resources Directives Tools References Delegation Procedures Archives help Help Directives, Delegations, and Other Requirements Directives Directives All current, archived and draft Directives Delegations Delegations Legal instrument

  13. Direct application of geothermal energy

    SciTech Connect (OSTI)

    Reistad, G.M.

    1980-01-01

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

  14. Direct measure of quantum correlation

    SciTech Connect (OSTI)

    Yu, Chang-shui [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); H. H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Zhao, Haiqing [School of Science, Dalian Jiaotong University, Dalian 116028 (China)

    2011-12-15

    The quantumness of the correlation known as quantum correlation is usually measured by quantum discord. So far various quantum discords can be roughly understood as indirect measure by some special discrepancy of two quantities. We present a direct measure of quantum correlation by revealing the difference between the structures of classically and quantum correlated states. Our measure explicitly includes the contributions of the inseparability and local nonorthogonality of the eigenvectors of a density matrix. Besides its relatively easy computability, our measure can provide a unified understanding of quantum correlation of all the present versions.

  15. LED Directional Lamps | Department of Energy

    Energy Savers

    Directional Lamps LED Directional Lamps BTP EERE Solid-State Lighting Program PDF icon leddirectionallamps.pdf More Documents & Publications Energy Savings Estimates of Light ...

  16. Solaire Direct SA | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Solaire Direct SA Jump to: navigation, search Name: Solaire Direct SA Place: Paris, France Zip: 75008 Product: Plans to build, operate and finance large PV installations, and...

  17. DemandDirect | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    DemandDirect Place: Woodbury, Connecticut Zip: 6798 Sector: Efficiency, Renewable Energy, Services Product: DemandDirect provides demand response, energy efficiency, load...

  18. Direct Energy Services (Illinois) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Place: Illinois Phone Number: 1-855-461-1926 Website: www.directenergy.comillinois Twitter: @DirectEnergy Facebook: https:www.facebook.comDirectEnergy Outage Hotline:...

  19. Directional Drilling Systems | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Directional Drilling Systems Jump to: navigation, search Geothermal ARRA Funded Projects for Directional Drilling Systems Loading map... "format":"googlemaps3","type":"ROADMAP","t...

  20. Digital Surveying Directional Surveying Specialists | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Surveying Specialists Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Digital Surveying Directional Surveying Specialists Author Directional Surveying...

  1. Biogas Direct LCC | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    LCC Jump to: navigation, search Name: Biogas Direct LCC Place: Spring Green, Wisconsin Zip: WI 53588 Product: Biogas Direct is specialized in constructing Biogas plants for the...

  2. Direct Imaging of Asymmetric Magnetization Reversal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Direct Imaging of Asymmetric Magnetization Reversal Direct Imaging of Asymmetric Magnetization Reversal Print Wednesday, 28 September 2005 00:00 The phenomenon of exchange bias has...

  3. Optically Directed Assembly of Continuous Mesoscale Filaments...

    Office of Scientific and Technical Information (OSTI)

    Optically Directed Assembly of Continuous Mesoscale Filaments Citation Details In-Document Search Title: Optically Directed Assembly of Continuous Mesoscale Filaments Authors: ...

  4. Staged direct injection diesel engine

    DOE Patents [OSTI]

    Baker, Quentin A.

    1985-01-01

    A diesel engine having staged injection for using lower cetane number fuels than No. 2 diesel fuel. The engine includes a main fuel injector and a pilot fuel injector. Pilot and main fuel may be the same fuel. The pilot injector injects from five to fifteen percent of the total fuel at timings from 20.degree. to 180.degree. BTDC depending upon the quantity of pilot fuel injected, the fuel cetane number and speed and load. The pilot fuel injector is directed toward the centerline of the diesel cylinder and at an angle toward the top of the piston, avoiding the walls of the cylinder. Stratification of the early injected pilot fuel is needed to reduce the fuel-air mixing rate, prevent loss of pilot fuel to quench zones, and keep the fuel-air mixture from becoming too fuel lean to become effective. In one embodiment, the pilot fuel injector includes a single hole for injection of the fuel and is directed at approximately 48.degree. below the head of the cylinder.

  5. Radial lean direct injection burner

    DOE Patents [OSTI]

    Khan, Abdul Rafey; Kraemer, Gilbert Otto; Stevenson, Christian Xavier

    2012-09-04

    A burner for use in a gas turbine engine includes a burner tube having an inlet end and an outlet end; a plurality of air passages extending axially in the burner tube configured to convey air flows from the inlet end to the outlet end; a plurality of fuel passages extending axially along the burner tube and spaced around the plurality of air passage configured to convey fuel from the inlet end to the outlet end; and a radial air swirler provided at the outlet end configured to direct the air flows radially toward the outlet end and impart swirl to the air flows. The radial air swirler includes a plurality of vanes to direct and swirl the air flows and an end plate. The end plate includes a plurality of fuel injection holes to inject the fuel radially into the swirling air flows. A method of mixing air and fuel in a burner of a gas turbine is also provided. The burner includes a burner tube including an inlet end, an outlet end, a plurality of axial air passages, and a plurality of axial fuel passages. The method includes introducing an air flow into the air passages at the inlet end; introducing a fuel into fuel passages; swirling the air flow at the outlet end; and radially injecting the fuel into the swirling air flow.

  6. Direct synthesis of calcium borohydride

    DOE Patents [OSTI]

    Ronnebro, Ewa Carin Ellinor; Majzoub, Eric H.

    2009-10-27

    A method is disclosed for directly preparing an alkaline earth metal borohydride, i.e. Ca(BH.sub.4).sub.2, from the alkaline earth metal hydride and the alkaline earth metal boride. The borohydride thus prepared is doped with a small portion of a metal chloride catalyst compound, such as RuCl.sub.3, TiCl.sub.3, or a mixture of TiCl.sub.3 and palladium metal. The process provides for mechanically mixing the dry reagents under an inert atmosphere followed by charging the mixed materials with high pressure hydrogen at about 70 MPa while heating the mixture to about 400.degree. C. The method is relatively simple and inexpensive and provides reversible hydride compounds which are free of the usual contamination introduced by prior art wet chemical methods.

  7. Method for directional hydraulic fracturing

    DOE Patents [OSTI]

    Swanson, David E.; Daly, Daniel W.

    1994-01-01

    A method for directional hydraulic fracturing using borehole seals to confine pressurized fluid in planar permeable regions, comprising: placing a sealant in the hole of a structure selected from geologic or cemented formations to fill the space between a permeable planar component and the geologic or cemented formation in the vicinity of the permeable planar component; making a hydraulic connection between the permeable planar component and a pump; permitting the sealant to cure and thereby provide both mechanical and hydraulic confinement to the permeable planar component; and pumping a fluid from the pump into the permeable planar component to internally pressurize the permeable planar component to initiate a fracture in the formation, the fracture being disposed in the same orientation as the permeable planar component.

  8. Direct synthesis of magnesium borohydride

    DOE Patents [OSTI]

    Ronnebro, Ewa Carin Ellinor; Severa, Godwin; Jensen, Craig M.

    2012-04-03

    A method is disclosed for directly preparing an alkaline earth metal borohydride, i.e. Mg(BH.sub.4).sub.2, from the alkaline earth metal boride MgB.sub.2 by hydrogenating the MgB.sub.2 at an elevated temperature and pressure. The boride may also be doped with small amounts of a metal chloride catalyst such as TiCl.sub.3 and/or NiCl.sub.2. The process provides for charging MgB.sub.2 with high pressure hydrogen above at least 70 MPa while simultaneously heating the material to about 350.degree. C. to about 400.degree. C. The method is relatively simple and inexpensive and provides a reversible hydride compound having a hydrogen capacity of at least 11 wt %.

  9. Laboratory directed research and development

    SciTech Connect (OSTI)

    Not Available

    1991-11-15

    The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

  10. Microsoft Word - DirectPayPermit.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    THIS DIRECT PAY PERMIT APPLIES ONLY TO PURCHASES MADE BY GE GLOBAL RESEARCH

  11. Synthesis and characterization of WO{sub 3} nanostructures prepared by an aged-hydrothermal method

    SciTech Connect (OSTI)

    Huirache-Acuna, R.; Paraguay-Delgado, F.; Albiter, M.A.; Lara-Romero, J.; Martinez-Sanchez, R.

    2009-09-15

    Nanostructures of tungsten trioxide (WO{sub 3}) have been successfully synthesized by using an aged route at low temperature (60 deg. C) followed by a hydrothermal method at 200 deg. C for 48 h under well controlled conditions. The material was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Energy Dispersive Spectroscopy (EDS), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Specific Surface Area (S{sub BET}) were measured by using the BET method. The lengths of the WO{sub 3} nanostructures obtained are between 30 and 200 nm and their diameters are from 20 to 70 nm. The growth direction of the tungsten oxide nanostructures was determined along [010] axis with an inter-planar distance of 0.38 nm.

  12. Electromagnetically Interacting Dust Streams During Ulysses' Second Jupiter Encounter

    SciTech Connect (OSTI)

    Krueger, H.; Forsyth, R.J.; Graps, A.L.; Gruen, E.

    2005-10-31

    The Jupiter system is a source of collimated burst-like streams of electrically charged 10-nm dust particles. In 2004 the Ulysses spacecraft had its second flyby at Jupiter and from late 2002 to early 2005 it measured a total of 24 dust streams between 0.8 and 3.4 AU from the planet. The grains show strong coupling to the interplanetary magnetic field: their impact directions correlate with the orientation and strength of the interplanetary magnetic field vector (namely its tangential and radial components) and they occur at 26 day intervals, closely matching the solar rotation period. Ulysses measured the dust streams over a large range in jovian latitude (+75 deg. to -35 deg.). Enhanced dust emission was measured along the jovian equator.

  13. Structural properties of InN films grown on O-face ZnO(0001) by plasma-assisted molecular beam epitaxy

    SciTech Connect (OSTI)

    Cho, Yong Jin; Brandt, Oliver; Kaganer, Vladimir M.; Ramsteiner, Manfred; Riechert, Henning; Korytov, Maxim; Albrecht, Martin

    2012-04-09

    We study the impact of substrate temperature and layer thickness on the morphological and structural properties of InN films directly grown on O-face ZnO(0001) substrates by plasma-assisted molecular beam epitaxy. With increasing substrate temperature, an interfacial reaction between InN and ZnO takes place that eventually results in the formation of cubic In{sub 2}O{sub 3} and voids. The properties of the InN films, however, are found to be unaffected by this reaction for substrate temperatures less than 550 deg. C. In fact, both the morphological and the structural quality of InN improve with increasing substrate temperature in the range from 350 to 500 deg. C. High quality films with low threading dislocation densities are demonstrated.

  14. Oblique-incidence sputtering of Ru intermediate layer for decoupling of intergranular exchange in perpendicular recording media

    SciTech Connect (OSTI)

    Saito, Shin; Inoue, Ken; Takahashi, Migaku

    2011-04-01

    During the Ru deposition process for granular type perpendicular magnetic recording media, both a reduction in the Ru intermediate layer thickness and lowering of sputtering gas pressure were successfully achieved by focusing on a self-shadowing effect. Oblique-incidence sputtering with a 60 deg. incident angle under an Ar gas pressure of 0.6 Pa yielded (1) columnar Ru grains with a growth direction of 30 deg. from the film normal, (2) c-plane sheet texture by epitaxial growth on the Pt underlayer, and (3) a flat envelope of the surface and a deep gap at grain boundaries. This change in the Ru structure significantly contributes to reducing exchange coupling among magnetic grains, especially in the initial growth region in an overlying granular medium.

  15. Preparation and structure characterization of SmCo{sub 5}(0001) epitaxial thin films grown on Cu(111) underlayers

    SciTech Connect (OSTI)

    Ohtake, Mitsuru; Nukaga, Yuri; Futamoto, Masaaki; Kirino, Fumiyoshi

    2009-04-01

    SmCo{sub 5}(0001) epitaxial films were prepared on Cu(111) single-crystal underlayers formed on Al{sub 2}O{sub 3}(0001) substrates at 500 deg. C. The nucleation and growth mechanism of (0001)-oriented SmCo{sub 5} crystal on Cu(111) underlayer is investigated and a method to control the nucleation is proposed. The SmCo{sub 5} epitaxial thin film formed directly on Cu underlayer consists of two types of domains whose orientations are rotated around the film normal by 30 deg. each other. By introducing a thin Co seed layer on the Cu underlayer, a SmCo{sub 5}(0001) single-crystal thin film is successfully obtained. Nucleation of SmCo{sub 5} crystal on Cu underlayer seems controllable by varying the interaction between the Cu underlayer and the SmCo{sub 5} layer.

  16. Measurable neutrino mass scale in A{sub 4}xSU(5)

    SciTech Connect (OSTI)

    Antusch, S.; Spinrath, M. [Max-Planck-Institut fuer Physik (Werner-Heisenberg-Institut), Foehringer Ring 6, D-80805 Muenchen (Germany); King, Stephen F. [School of Physics and Astronomy, University of Southampton, SO17 1BJ Southampton (United Kingdom)

    2011-01-01

    We propose a supersymmetric A{sub 4}xSU(5) model of quasidegenerate neutrinos which predicts the effective neutrino mass m{sub ee} relevant for neutrinoless double beta decay to be proportional to the neutrino mass scale, thereby allowing its determination approximately independently of unknown Majorana phases. Such a natural quasidegeneracy is achieved by using A{sub 4} family symmetry (as an example of a non-Abelian family symmetry with real triplet representations) to enforce a contribution to the neutrino mass matrix proportional to the identity. Tribimaximal neutrino mixing as well as quark CP violation with {alpha}{approx_equal}90 deg. d a leptonic CP phase {delta}{sub MNS{approx_equal}}90 deg. arise from the breaking of the A{sub 4} family symmetry by the vacuum expectation values of four 'flavon' fields pointing in specific postulated directions in flavor space.

  17. Physical analysis of the radiation shielding for the medical accelerators

    SciTech Connect (OSTI)

    Li, Q. F.; Xing, Q. Z.; Kong, C. C.

    2009-02-01

    Radiation safety standards today require comprehensive shielding protection schemes for all particle accelerators. The original shielding system of BJ-20 (BeiJing-20 MeV), the high-energy medical electron linac, was designed only for the 18 MeV level. And the dose caused by the lost electrons in the 270 deg. bending magnet system was neglected. In this paper, the leakage dose of BJ-20 is carefully analyzed. The radiation leakage dose distribution of the photons coming from the accelerator head is obtained for energy levels of 6, 12, 14, and 18 MeV. The dose of the photoneutrons is especially analyzed for the 18 MeV level. The result gives that even neglecting the dose from the 270 deg. bending magnet system, the shielding system is still not enough for the energy levels lower than 18 MeV. The radiation leakage produced by electrons that are lost in the 270 deg. bending magnet system has been particularly studied. Using beam transport theory and Monte Carlo sampling methods, which have been combined in calculations, we have obtained the distribution of the energy, position, and direction of the lost electrons. These data were then further processed by the Monte Carlo N-particle (MCNP) code as input data. The results show that when the electron loss rate in the 270 deg. bending magnet system is 13.5%, the radiation leakage dose of the photons generated by the lost electrons is 0.1% higher than that at the isocenter, and the corresponding relative leakage dose of the photoneutrons reaches 0.045% around an angle of 170 deg. at 18 MeV level. Both of these parameters exceed radioprotection safety standards for medical accelerators. The original shielding design is therefore not suitable and is also incomplete since the radiation produced by the electrons being lost in the 270 deg. bending magnet system was neglected and the leakage dose for the low-energy levels was not considered in the original design. Our calculations provide a very useful tool for further

  18. Direct detector for terahertz radiation

    DOE Patents [OSTI]

    Wanke, Michael C.; Lee, Mark; Shaner, Eric A.; Allen, S. James

    2008-09-02

    A direct detector for terahertz radiation comprises a grating-gated field-effect transistor with one or more quantum wells that provide a two-dimensional electron gas in the channel region. The grating gate can be a split-grating gate having at least one finger that can be individually biased. Biasing an individual finger of the split-grating gate to near pinch-off greatly increases the detector's resonant response magnitude over prior QW FET detectors while maintaining frequency selectivity. The split-grating-gated QW FET shows a tunable resonant plasmon response to FIR radiation that makes possible an electrically sweepable spectrometer-on-a-chip with no moving mechanical optical parts. Further, the narrow spectral response and signal-to-noise are adequate for use of the split-grating-gated QW FET in a passive, multispectral terahertz imaging system. The detector can be operated in a photoconductive or a photovoltaic mode. Other embodiments include uniform front and back gates to independently vary the carrier densities in the channel region, a thinned substrate to increase bolometric responsivity, and a resistive shunt to connect the fingers of the grating gate in parallel and provide a uniform gate-channel voltage along the length of the channel to increase the responsivity and improve the spectral resolution.

  19. Low backlash direct drive actuator

    DOE Patents [OSTI]

    Kuklo, Thomas C. (Oakland, CA)

    1994-01-01

    A low backlash direct drive actuator is described which comprises a motor such as a stepper motor having at least 200 steps per revolution; a two part hub assembly comprising a drive hub coaxially attached to the shaft of the motor and having a plurality of drive pins; a driven hub having a plurality of bores in one end thereof in alignment with the drive pins in the drive hub and a threaded shaft coaxially mounted in an opposite end of the driven hub; and a housing having a central bore therein into which are fitted the drive hub and driven hub, the housing having a motor mount on one end thereof to which is mounted the stepper motor, and a closed end portion with a threaded opening therein coaxial with the central bore in the housing and receiving therein the threaded shaft attached to the driven hub. Limit switches mounted to the housing cooperate with an enlarged lip on the driven hub to limit the lateral travel of the driven hub in the housing, which also acts to limit the lateral travel of the threaded shaft which functions as a lead screw.

  20. Low backlash direct drive actuator

    DOE Patents [OSTI]

    Kuklo, T.C.

    1994-10-25

    A low backlash direct drive actuator is described which comprises a motor such as a stepper motor having at least 200 steps per revolution; a two part hub assembly comprising a drive hub coaxially attached to the shaft of the motor and having a plurality of drive pins; a driven hub having a plurality of bores in one end thereof in alignment with the drive pins in the drive hub and a threaded shaft coaxially mounted in an opposite end of the driven hub; and a housing having a central bore therein into which are fitted the drive hub and driven hub, the housing having a motor mount on one end thereof to which is mounted the stepper motor, and a closed end portion with a threaded opening therein coaxial with the central bore in the housing and receiving therein the threaded shaft attached to the driven hub. Limit switches mounted to the housing cooperate with an enlarged lip on the driven hub to limit the lateral travel of the driven hub in the housing, which also acts to limit the lateral travel of the threaded shaft which functions as a lead screw. 10 figs.

  1. Direct Energy Services (Massachusetts) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services Place: Massachusetts Phone Number: 1-855-461-1930 Twitter: @DirectEnergy Facebook: http:www.facebook.comDirectEnergy Outage Hotline: 1-800-233-5325 (Greater Boston...

  2. Direct Energy, LP | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Direct Energy, LP Place: Texas Website: www.directenergy.com Twitter: @directenergy Facebook: https:www.facebook.comDirectEnergy Outage Hotline: 1-855-461-1926 References: EIA...

  3. Amesos2 Templated Direct Sparse Solver Package

    Energy Science and Technology Software Center (OSTI)

    2011-05-24

    Amesos2 is a templated direct sparse solver package. Amesos2 provides interfaces to direct sparse solvers, rather than providing native solver capabilities. Amesos2 is a derivative work of the Trilinos package Amesos.

  4. Living Direct: Order (2011-CE-1904)

    Energy.gov [DOE]

    DOE ordered Living Direct, Inc. to pay a $6,000 civil penalty after finding Living Direct had failed to certify that certain models of dishwashers, refrigerator-freezers and freezers comply with the applicable energy conservation standards.

  5. DIRECT LIQUEFACTION PROOF OF CONCEPT

    SciTech Connect (OSTI)

    1998-09-01

    The eighth bench scale test of POC program, Run PB-08, was successfully completed from August 8 to August 26, 1997. A total of five operating conditions were tested aiming at evaluating the reactivity of different pyrolysis oils in liquefaction of a Wyoming sub-bituminous coal (Black Thunder coal). For the first time, water soluble promoters were incorporated into the iron-based GelCat to improve the dispersion of the promoter metals in the feed blend. The concentration of the active metals, Mo and Fe, was 100 and 1000 ppm of moisture-free coal, respectively. Black Thunder coal used in this run was the same batch as tested in HTI?s Run POC-02. Similar to Runs PB-01 through 7, this run employed two back mixed slurry reactors, an interstage gas/slurry separator and a direct-coupled hydrotreater. In addition to the hot vapor from the second stage separator, the first stage separator overhead liquid was also fed to the hydrotreater, which was packed with Criterion C-411 hydrotreating catalyst. Pyrolysis oil was produced off-line from a pyrolysis unit acquired from University of Wyoming. Solids rejection was achieved by purging out pressure filter solid. The recycle solvents consisted of O-6 separator bottoms and pressure filter liquid (PFL). The Run PB-08 proceeded very smoothly without any interruptions. Coal conversion consistently above 90W% was achieved. High resid conversion and distillate yield have been obtained from co-processing of coal and 343C+ (650F+) pyrolysis oil. Light gas (C1-C3 ) yield was minimized and hydrogen consumption was reduced due to the introduction of pyrolysis oil, compared with conventional coal-derived solvent. Catalytic activity was improved by incorporating a promoter metal into the iron-based GelCat. It seemed that lowering the first stage temperature to 435C might increase the hydrogenation function of the promoter metal. In comparison with previous coal-waste coprocessing run (PB-06), significant improvements

  6. DPC Resources - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DPC Resources by Website Administrator This section contains DPC Resources and Responsibilities DPC Contact Directives Points of Contact Updated listing of contact information for DOE Headquarters, field, and contractor DPCs. DPC Responsibility DPC Responsibilities All DPCs are responsible for: Serving as a liaison between their organization and the Directives Program Disseminating changes in the Directives Program Assigning subject matter experts to review and comment on directives Creating a

  7. Program Direction At-A-Glance

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PROGRAM DIRECTION PROGRAM DIRECTION FY 2017 BUDGET AT-A-GLANCE Program Direction enables EERE to maintain and support a world-class federal workforce to accomplish its mission of creating and sustaining American leadership in the sustainable transportation, renewable power, and energy efficiency sectors.The FY 2017 Program Direction budget request provides resources for program and project management, administrative support, contract administration, human capital management, headquarters and

  8. Hydrothermal industrialization: direct heat development. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-05-01

    A description of hydrothermal resources suitable for direct applications, their associated temperatures, geographic distribution and developable capacity are given. An overview of the hydrothermal direct-heat development infrastructure is presented. Development activity is highlighted by examining known and planned geothermal direct-use applications. Underlying assumptions and results for three studies conducted to determine direct-use market penetration of geothermal energy are discussed.

  9. Extension of DOE Directives on Security

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-12-31

    This Notice extends 15 Office of Security and Emergency Operation directives that have expired or will expire until December 31, 2001. This Notice will remain in effect until its expiration date or until new/revised directives are published. The following statement will be added to the summary of the extended directives-DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01.

  10. Recent Updates - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    directives, administrative changes, Justification Memoranda, requirementsother ... Guide Manual Policy Notice Cancellation Notice HQ Order Sec of Energy Notice Justification ...

  11. Basic ReseaRch DiRections

    National Nuclear Security Administration (NNSA)

    Basic ReseaRch DiRections for User Science at the National Ignition Facility Report on the National Nuclear Security Administration - Office of Science Workshop on Basic Research Directions on User Science at the National Ignition Facility BASIC RESEARCH DIRECTIONS FOR USER SCIENCE AT THE NATIONAL IGNITION FACILITY Report on the National Nuclear Security Administration (NNSA) - Office of Science (SC) Workshop on Basic Research Directions on User Science at the National Ignition Facility Chairs:

  12. supplemental directives | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    supplemental directives Supplemental Directives NA-1 SD 226.1-1A Headquarters Biennial Review of Nuclear Safety Performance December 16, 2011 NNSA SD 226.1B NNSA Site Governance August 12, 2016 NNSA SD 243.1 Admin Change 1 Records Management Program March 21, 2016 NA SD 251.1 NNSA Policies, Supplemental Directives, and Business Operating

  13. Air breathing direct methanol fuel cell

    DOE Patents [OSTI]

    Ren, Xiaoming

    2002-01-01

    An air breathing direct methanol fuel cell is provided with a membrane electrode assembly, a conductive anode assembly that is permeable to air and directly open to atmospheric air, and a conductive cathode assembly that is permeable to methanol and directly contacting a liquid methanol source.

  14. Direct Deposit Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Direct Deposit Form Direct Deposit Form Direct Deposit Form (66.61 KB) More Documents & Publications Employee In-Processing Forms Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program Agreement for Minority Financial Institutions Participation in the Bank Deposit Financial Assistance Program

  15. SEPARATION OF RUTHENIUM COMPOUNDS FROM GASEOUS MIXTURES

    DOE Patents [OSTI]

    Newby, B.J.; Hanson, D.A.; May, C.E.

    1960-12-13

    A process is given for removing RuO/sub 4/ from waste calcination off- gases by adsorption on silica gel, preferably of from 70 to 80 deg C. The RuO/sub 4/ can be eluted from the silica gel with water of a temperature between 60 and 70 deg C.

  16. TITLE

    Office of Legacy Management (LM)

    ... No. S0038700 Page 3-14 U.S. Department of Energy Rev.O Rt>v n* MDEG DEG ...

  17. Method of forming impermeable carbide coats on graphite

    DOE Patents [OSTI]

    Wohlberg, C.

    1973-12-11

    A method of forming an impermeable refractory metal carbide coating on graphite is described in which a metal containing oxidant and a carbide former are applied to the surface of the graphite, heated to a temperature of between 1200 and 1500 deg C in an inert gas, under a vacuum and continuing to heat to about 2300 deg C. (Official Gazette)

  18. Identification of Focal Mechanisms of Seisms Occurring in the San Salvador Volcano-Ilopango Lake Area Between 1994 and March 2005

    SciTech Connect (OSTI)

    Maria Mendez Martinez, Luz de; Portillo, Mercy

    2009-04-19

    We studied the geographic area located in the central part of El Salvador, between the San Salvador Volcano (Quezaltepec) and Ilopango Lake. Its latitude is between 13 deg. 36' and 13 deg. 54', and longitude is between -89 deg. 18' and -88 deg. 57'. This area is directly affected by the WNW axis, the most prominent weak tectonic system in the region. Our research aimed to determine the focal mechanisms of seisms occurring in the studied area between 1994 and March 2005. Our analysis provided information about displacement types of the geological faults, using the wave impulse P method and computer applications ARCGIS and SEISAN, with the subroutine FOCMEC. Information of the studied seisms was obtained from the National Service of Territorial Studies (SNET) database. Geographic models used in the preparation of maps are from the geographic information system of the School of Physics at the University of El Salvador. The 37 focal mechanisms on the map of faults were identified in digital seismographs to determinate the arrival polarity of the wave P for each seism station. Data from the focal mechanisms were analyzed and correlated with their replications. The analysis allowed us to identify evidences to consider the fault continuity not reported by the last geological mission in El Salvador conducted in the 1970s. The fault continuity is located northwest of the studied geographical area, between San Salvador City and the San Salvador Volcano. The compression and strain axes for this area are two main horizontal force axes. The average orientation for the strain axis is NNE-SSW, and WNW-SEE for the compression axis. There is also important seismic activity in the Ilopango Lake and surrounding area. However, data did not allow us to make any inference. The tensors distribution resulted in a high dispersion corresponding to typical fauces models.

  19. Chemical changes in carbon Nanotube-Nickel/Nickel Oxide Core/Shell nanoparticle heterostructures treated at high temperatures

    SciTech Connect (OSTI)

    Chopra, Nitin; McWhinney, Hylton G.; Shi Wenwu

    2011-06-15

    Heterostructures composed of carbon nanotube (CNT) coated with Ni/NiO core/shell nanoparticles (denoted as CNC heterostructures) were synthesized in a wet-chemistry and single-step synthesis route involving direct nucleation of nanoparticles on CNT surface. Two different aspects of CNC heterostructures were studied here. First, it was observed that the nanoparticle coatings were more uniform on the as-produced and non-purified CNTs compared to purified (or acid treated) CNTs. These heterostructures were characterized using electron microscopy, Raman spectroscopy, and energy dispersive spectroscopy. Second, thermal stability of CNC heterostructures was studied by annealing them in N{sub 2}-rich (O{sub 2}-lean) environment between 125 and 750 deg. C for 1 h. A detailed X-ray photoelectron spectroscopy and Raman spectroscopy analysis was performed to evaluate the effects of annealing temperatures on chemical composition, phases, and stability of the heterostructures. It was observed that the CNTs present in the heterostructures completely decomposed and core Ni nanoparticle oxidized significantly between 600 and 750 deg. C. - Research Highlights: {yields} Heterostructures composed of CNTs coated with Ni/NiO core/shell nanoparticles. {yields} Poor nanoparticle coverage on purified CNT surface compared to non-purified CNTs. {yields} CNTs in heterostructures decompose between 600 and 750 deg. C in N{sub 2}-rich atmosphere. {yields} Metallic species in heterostructures were oxidized at higher temperatures.

  20. Electronic transport of titanate heterostructures and their potential as channels on (001) Si

    SciTech Connect (OSTI)

    Kornblum, Lior Jin, Eric N.; Walker, Fred J.; Shoron, Omor; Boucherit, Mohamed; Rajan, Siddharth; Ahn, Charles H.

    2015-09-14

    Perovskite oxides and their heterostructures have demonstrated considerable potential for devices that require high carrier densities. These oxides are typically grown on ceramic substrates that suffer from low thermal conductivity, which limits performance under high currents, and from the limited size of substrates, which precludes large scale integration and processing. We address both of these hurdles by integrating oxide heterostructures with high carrier density 2D electron gases (2DEGs) directly on (001) Si. 2DEGs grown on Si show significant improvement of the high current performance over those grown on oxide substrates, a consequence of the higher thermal conductivity of the substrate. Hall analysis, transmission line measurements, and the conductance technique are employed for a detailed analysis of the carrier density, contact resistance, mobility, and electron drift velocities. Current densities of 10 A/cm are observed at room temperature with 2.9 × 10{sup 14} electrons/cm{sup 2} at a drift velocity exceeding 3.5 × 10{sup 5 }cm/s. These results highlight the promise of oxide 2DEGs integration on Si as channels for high electron density devices.

  1. The effect of charged quantum dots on the mobility of a two-dimensional electron gas: How important is the Coulomb scattering?

    SciTech Connect (OSTI)

    Kurzmann, A. Beckel, A.; Lorke, A.; Geller, M.; Ludwig, A.; Wieck, A. D.

    2015-02-07

    We have investigated the influence of a layer of charged self-assembled quantum dots (QDs) on the mobility of a nearby two-dimensional electron gas (2DEG). Time-resolved transconductance spectroscopy was used to separate the two contributions of the change in mobility, which are: (i) The electrons in the QDs act as Coulomb scatterers for the electrons in the 2DEG. (ii) The screening ability and, hence, the mobility of the 2DEG decreases when the charge carrier density is reduced by the charged QDs, i.e., the mobility itself depends on the charge carrier concentration. Surprisingly, we find a negligible influence of the Coulomb scattering on the mobility for a 2DEG, separated by a 30 nm tunneling barrier to the layer of QDs. This means that the mobility change is completely caused by depletion, i.e., reduction of the charge carrier density in the 2DEG, which indirectly influences the mobility.

  2. Accuracy of cranial coplanar beam therapy using an oblique, stereoscopic x-ray image guidance system

    SciTech Connect (OSTI)

    Vinci, Justin P.; Hogstrom, Kenneth R.; Neck, Daniel W.

    2008-08-15

    A system for measuring two-dimensional (2D) dose distributions in orthogonal anatomical planes in the cranium was developed and used to evaluate the accuracy of coplanar conformal therapy using ExacTrac image guidance. Dose distributions were measured in the axial, sagittal, and coronal planes using a CIRS (Computerized Imaging Reference Systems, Inc.) anthropomorphic head phantom with a custom internal film cassette. Sections of radiographic Kodak EDR2 film were cut, processed, and digitized using custom templates. Spatial and dosimetric accuracy and precision of the film system were assessed. BrainScan planned a coplanar-beam treatment to conformally irradiate a 2-cm-diameterx2-cm-long cylindrical planning target volume. Prior to delivery, phantom misalignments were imposed in combinations of {+-}8 mm offsets in each of the principal directions. ExacTrac x-ray correction was applied until the phantom was within an acceptance criteria of 1 mm/1 deg. (first two measurement sets) or 0.4 mm/0.4 deg. (last two measurement sets). Measured dose distributions from film were registered to the treatment plan dose calculations and compared. Alignment errors, displacement between midpoints of planned and measured 70% isodose contours ({delta}c), and positional errors of the 80% isodose line were evaluated using 49 2D film measurements (98 profiles). Comparison of common, but independent measurements of {delta}c showed that systematic errors in the measurement technique were 0.2 mm or less along all three anatomical axes and that random error averaged ({sigma}{+-}{sigma}{sub {sigma}}) 0.29{+-}0.06 mm for the acceptance criteria of 1 mm/1 deg. and 0.15{+-}0.02 mm for the acceptance criteria of 0.4 mm/0.4 deg. . The latter was consistent with independent estimates that showed the precision of the measurement system was 0.3 mm (2{sigma}). Values of {delta}c were as great as 0.9, 0.3, and 1.0 mm along the P-A, R-L, and I-S axes, respectively. Variations in {delta}c along the P

  3. ARM - Measurement - Shortwave broadband direct downwelling irradiance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    direct downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave broadband direct downwelling irradiance Radiant energy, across the wavelength range of 0.4 and 4 {mu}m, that is transferred directly from the sun to the receiver. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream

  4. ARM - Measurement - Shortwave narrowband direct downwelling irradiance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    downwelling irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband direct downwelling irradiance The direct unscattered radiant energy from the Sun, in a narrow band of wavelengths shorter than approximately 4 {mu}m, passing through a horizontal unit area in a downward direction. Categories Radiometric Instruments The above measurement is considered scientifically relevant for

  5. ARM - Measurement - Shortwave spectral direct normal irradiance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    direct normal irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave spectral direct normal irradiance The narrow spectral range of measurements coming directly from the sun whose wavelength falls within the solar range of 0.4 and 4 {mu}m. Categories Radiometric Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream

  6. ARM - PI Product - Direct Aerosol Forcing Uncertainty

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ProductsDirect Aerosol Forcing Uncertainty ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Direct Aerosol Forcing Uncertainty Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement

  7. Air breathing direct methanol fuel cell

    DOE Patents [OSTI]

    Ren, Xiaoming; Gottesfeld, Shimshon

    2002-01-01

    An air breathing direct methanol fuel cell is provided with a membrane electrode assembly, a conductive anode assembly that is permeable to air and directly open to atmospheric air, and a conductive cathode assembly that is permeable to methanol and directly contacting a liquid methanol source. Water loss from the cell is minimized by making the conductive cathode assembly hydrophobic and the conductive anode assembly hydrophilic.

  8. Acronyms - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Acronyms by Website Administrator CRD - Contractor Requirements Document DNFSB - Defense Nuclear Facilities Safety Board DMTeam - Directives Management Team (MA-90) DOE P - Department of Energy Policy DOE N - Department of Energy Notice DOE O - Department of Energy Order DOE M - Department of Energy Manual DOE G - Department of Energy Guide DPC - Directives Point of Contact DRB - Directives Review Board established by DOE O 251.1C OPI - Office of Primary Interest (the writing organization)

  9. Supplemental Directives | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Supplemental Directives NNSA Supplemental Directives provide policy for NNSA employees and contractors which supplement DOE policy. NNSA Supplemental Directives provide policy for NNSA employees and contractors which supplement DOE policy. NA-1 SD 226.1-1A Headquarters Biennial Review of Nuclear Safety Performance December 16, 2011 NNSA SD 226.1B NNSA Site Governance August 12, 2016 NNSA SD 243.1 Admin Change 1 Records Management Program March 21, 2016 NA SD 251.1 NNSA Policies, Supplemental

  10. Direct conversion of algal biomass to biofuel

    DOE Patents [OSTI]

    Deng, Shuguang; Patil, Prafulla D; Gude, Veera Gnaneswar

    2014-10-14

    A method and system for providing direct conversion of algal biomass. Optionally, the method and system can be used to directly convert dry algal biomass to biodiesels under microwave irradiation by combining the reaction and combining steps. Alternatively, wet algae can be directly processed and converted to fatty acid methyl esters, which have the major components of biodiesels, by reacting with methanol at predetermined pressure and temperature ranges.

  11. Low Temperature Direct Use Industrial Geothermal Facilities ...

    Open Energy Information (Open El) [EERE & EIA]

    Low Temperature Direct Use Industrial Geothermal Facilities Jump to: navigation, search Loading map... "format":"googlemaps3","type":"ROADMAP","types":"ROADMAP","SATELLITE","HYBR...

  12. Direct Energy Services (Maryland) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Services (Maryland) Jump to: navigation, search Name: Direct Energy Services Place: Maryland Phone Number: 1-855-461-1926 Website: www.directenergy.commaryland Twitter: https:...

  13. Direct Kinetic Measurements of a Criegee Intermediate

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    quantities. Because Criegee intermediates have long been thought to play a key role in atmospheric chemistry, the announcement of a method to directly measure their reactivity...

  14. Directional Reactive Power Ground Plane Transmission - Energy...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Marketing SummaryORNL researchers have developed a pioneering power alternative to batteries using directional reactive power. Batteries are currently the primary option for...

  15. Asymmetric Wettability Directs Leidenfrost Droplets (Journal...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Asymmetric Wettability Directs Leidenfrost Droplets Citation Details ... Here, we report the fabrication and characterization of ...

  16. Directions to Argonne | Advanced Photon Source

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Road, immediately south of I-55. Follow Northgate Road to the Argonne Information Center. Google Maps directions from Midway external link By public transportation: Take the...

  17. Direct Energy Services (Pennsylvania) | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Place: Pennsylvania Phone Number: 1-855-461-1926 Website: www.directenergy.compa Twitter: @directenergy Facebook: https:www.facebook.comDirectEnergy Outage Hotline:...

  18. Low Temperature Direct Use Aquaculture Geothermal Facilities...

    Open Energy Information (Open El) [EERE & EIA]

    Low Temperature Direct Use Aquaculture Geothermal Facilities Jump to: navigation, search Loading map... "format":"googlemaps3","type":"ROADMAP","types":"ROADMAP","SATELLITE","HYB...

  19. Low Temperature Direct Use Greenhouse Geothermal Facilities ...

    Open Energy Information (Open El) [EERE & EIA]

    Low Temperature Direct Use Greenhouse Geothermal Facilities Jump to: navigation, search Loading map... "format":"googlemaps3","type":"ROADMAP","types":"ROADMAP","SATELLITE","HYBR...

  20. Ionization based multi-directional flow sensor

    DOE Patents [OSTI]

    Chorpening, Benjamin T.; Casleton, Kent H.

    2009-04-28

    A method, system, and apparatus for conducting real-time monitoring of flow (airflow for example) in a system (a hybrid power generation system for example) is disclosed. The method, system and apparatus measure at least flow direction and velocity with minimal pressure drop and fast response. The apparatus comprises an ion source and a multi-directional collection device proximate the ion source. The ion source is configured to generate charged species (electrons and ions for example). The multi-directional collection source is configured to determine the direction and velocity of the flow in real-time.

  1. Direct and quantitative broadband absorptance spectroscopy with...

    Office of Scientific and Technical Information (OSTI)

    Patent: Direct and quantitative broadband absorptance spectroscopy with multilayer ... DOE Contract Number: FG02-02ER45977 Resource Type: Patent Research Org: Massachusetts ...

  2. Direct Imaging of Asymmetric Magnetization Reversal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Direct Imaging of Asymmetric Magnetization Reversal Print The phenomenon of exchange bias has transformed how data is read on magnetic hard disks and created an explosion in their...

  3. Optically Directed Assembly of Continuous Mesoscale Filaments...

    Office of Scientific and Technical Information (OSTI)

    Optically Directed Assembly of Continuous Mesoscale Filaments Bahns, J. T.; Sankaranarayanan, S. K. R. S.; Gray, S. K.; Chen, L. Not Available American Physical Society None USDOE...

  4. Direct Imaging of Antiferromagnetic Vortex States

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Recently, a research team from Berkeley, Korea, and China has taken the first direct image ... Young, and A. Scholl (ALS); C. Hwang (Korea Research Institute of Standards and ...

  5. Direct Imaging of Antiferromagnetic Vortex States

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    there has been no direct observation of such states in an AFM microstructure, although theory predicts many interesting and unique properties for the AFM vortex state. Recently, a...

  6. Direct Kinetic Measurements of a Criegee Intermediate

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Direct Kinetic Measurements of a Criegee Intermediate Print In the earth's troposphere, which blankets the planet surface where we live and breathe, dust particles, gas molecules,...

  7. Direct Imaging of Antiferromagnetic Vortex States

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    activity in the study of vortex states in FM disks, there has been no direct observation of such states in an AFM microstructure, although theory predicts many interesting...

  8. Jefferson Lab - Laboratory Directed Research & Development

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Call for FY17 LDRD Proposals An important element of Jefferson Lab's Strategic Plan is the implementation of a Laboratory Directed Research and Development (LDRD) program. The lab ...

  9. DRB Liaison - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DRB Liaison by Website Administrator Emily Stanton Directives Review Board Liaison 202-287-5641 Forrestal, Room 1G-051 Emily.Stanton@hq.doe.gov

  10. Direct fired absorption machine flue gas recuperator

    DOE Patents [OSTI]

    Reimann, Robert C.; Root, Richard A.

    1985-01-01

    A recuperator which recovers heat from a gas, generally the combustion gas of a direct-fired generator of an absorption machine. The recuperator includes a housing with liquid flowing therethrough, the liquid being in direct contact with the combustion gas for increasing the effectiveness of the heat transfer between the gas and the liquid.

  11. References - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    References by Website Administrator This page provides information and links to references. Technical Standards Technical Standards Program Technical Standards Home RevCom for Technical Standards Technical Standards Crosswalk NNSA Directives National Nuclear Security Administration (NNSA) Supplemental Directives NNSA Policies (NAPs) FAR Federal Acquisition Regulations Federal Acquisition Regulations (FAR) DOE Acquisition Regulations (DEAR) CFR Code of Federal Regulations CFR (annual edition) 10

  12. ARM - Measurement - Shortwave broadband direct normal irradiance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    normal irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave broadband direct normal irradiance The rate at which radiant energy in broad bands of wavelengths shorter than approximately 4{mu}m, that comes directly from the Sun without being scattered or absorbed in the atmosphere, passes through a unit area perpendicular to the direction from the Sun. Categories Radiometric Instruments

  13. ARM - Measurement - Shortwave narrowband direct normal irradiance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    normal irradiance ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Shortwave narrowband direct normal irradiance The rate at which radiant energy in narrow bands of wavelengths shorter than approximately 4{mu}m, that comes directly from the Sun without being scattered or absorbed in the atmosphere, passes through a unit area perpendicular to the direction from the Sun. Categories Radiometric Instruments

  14. Email Alerts - DOE Directives, Delegations, and Requirements

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Email Alerts by Diane Johnson Use this form to subscribe/unsubscribe to email alerts. Please select the type of email alert that you would like to receive. Your Name Please enter your name Your E-Mail Address Select the items you wish to receive notifications for. Type of Alert Please indicate below what type of email alert you would like to receive. Choose all that apply. New Final Directives New Draft Directives Both - New Final/Draft Directives Approved Justification Memos Unsubscribe S

  15. Geothermal direct use engineering and design guidebook

    SciTech Connect (OSTI)

    Lienau, P.J.; Lunis, B.C.

    1991-01-01

    The Geothermal Direct Use Engineering and Design Guidebook is designed to be a comprehensive, thoroughly practical reference guide for engineers and designers of direct heat projects. These projects could include the conversion of geothermal energy into space heating and cooling of buildings, district heating, greenhouse heating, aquaculture and industrial processing. The Guidebook is directed at understanding the nature of geothermal resources and the exploration of the resources, fluid sampling techniques, drilling, and completion of geothermal wells through well testing, and reservoir evaluation. It presents information useful to engineers on the specification of equipment including well pumps, piping, heat exchangers, space heating equipment, heat pumps and absorption refrigeration. A compilation of current information about greenhouse aquaculture and industrial applications is included together with a discussion of engineering cost analysis, regulation requirements, and environmental consideration. The purpose of the Guidebook is to provide an integrated view for the development of direct use projects for which there is a very large potential in the United States.

  16. Framework Topic Briefing: Direct Feed LAW

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    February 13, 2014 Framework Topic Briefing: Direct Feed LAW Next steps: Put Dick's handouts on SharePoint * Continue Framework topic briefing series Page 1 System Plan 7 Next ...

  17. Microsoft Word - wind direction vane1.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Understanding Wind Direction And Making A Wind Vane Grade Levels: Kindergarten, 1, 2, and 3 Objectives: The students will learn how to construct a wind vane and understand the ...

  18. Air Breathing Direct Methanol Fuel Cell

    DOE Patents [OSTI]

    Ren; Xiaoming

    2003-07-22

    A method for activating a membrane electrode assembly for a direct methanol fuel cell is disclosed. The method comprises operating the fuel cell with humidified hydrogen as the fuel followed by running the fuel cell with methanol as the fuel.

  19. Methods of conditioning direct methanol fuel cells

    DOE Patents [OSTI]

    Rice, Cynthia; Ren, Xiaoming; Gottesfeld, Shimshon

    2005-11-08

    Methods for conditioning the membrane electrode assembly of a direct methanol fuel cell ("DMFC") are disclosed. In a first method, an electrical current of polarity opposite to that used in a functioning direct methanol fuel cell is passed through the anode surface of the membrane electrode assembly. In a second method, methanol is supplied to an anode surface of the membrane electrode assembly, allowed to cross over the polymer electrolyte membrane of the membrane electrode assembly to a cathode surface of the membrane electrode assembly, and an electrical current of polarity opposite to that in a functioning direct methanol fuel cell is drawn through the membrane electrode assembly, wherein methanol is oxidized at the cathode surface of the membrane electrode assembly while the catalyst on the anode surface is reduced. Surface oxides on the direct methanol fuel cell anode catalyst of the membrane electrode assembly are thereby reduced.

  20. Geothermal Direct Use | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Utah, is one of the many greenhouses nationwide that benefit from the direct use of geothermal energy. Geothermal reservoirs of hot water, which are found a few miles or more...

  1. Geothermal direct use engineering and design guidebook

    SciTech Connect (OSTI)

    Bloomquist, R.G.; Culver, G.; Ellis, P.F.; Higbee, C.; Kindle, C.; Lienau, P.J.; Lunis, B.C.; Rafferty, K.; Stiger, S.; Wright, P.M.

    1989-03-01

    The Geothermal Direct Use Engineering and Design Guidebook is designed to be a comprehensive, thoroughly practical reference guide for engineers and designers of direct heat projects. These projects could include the conversion of geothermal energy into space heating cooling of buildings, district heating, greenhouse heating, aquaculture and industrial processing. The Guidebook is directed at understanding the nature of geothermal resources and the exploration of these resources, fluid sampling techniques, drilling, and completion of geothermal wells through well testing, and reservoir evaluation. It presents information useful to engineers on the specification of equipment including well pumps, piping, heat exchangers, space heating equipment, heat pumps and absorption refrigeration. A compilation of current information about greenhouse, aquaculture and industrial applications is included together with a discussion of engineering cost analysis, regulation requirements, and environmental considerations. The purpose of the Guidebook is to provide an integrated view for the development of direct use projects for which there is a very potential in the United States.

  2. Investigation of Direct Injection Vehicle Particulate Matter...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    This study focuses primarily on particulate matter mass analysis of a gasoline direct injection engine in a test cell with a chassis dynamometer. PDF icon p-10gibbs.pdf More ...

  3. NERSC_FutureDirections_SPXXLCanHelp.pptx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Future Directions and How SPXXL Can Help May 2 1, 2 015 Storage workloads at a user facility Centerwide S torage Petascale fi le s ystems ( NGF), a nd archival s torage ( HPSS)...

  4. Wind Direct Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    to: navigation, search Name: Wind Direct Ltd Place: Solihull, United Kingdom Zip: B91 2PQ Sector: Wind energy Product: Develops small wind farms (1-5MW) particularly for industrial...

  5. Microstructure and Mechanical Behavior of Directional Solidified...

    Office of Scientific and Technical Information (OSTI)

    Title: Microstructure and Mechanical Behavior of Directional Solidified Fe35Ni15Mn25Al25 Authors: Wu, Xiaolan 1 ; Baker, Ian 1 ; Miller, Michael K 2 ; More, Karren Leslie 2 ...

  6. Direct Imaging of Asymmetric Magnetization Reversal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    material like iron is itself a tiny magnet represented by a magnetic moment. If the atomic moments are pointing in random directions, they cancel each other out. So, to bring...

  7. First Direct Imaging of Swollen Microgel Particles

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    First Direct Imaging of Swollen Microgel Particles Print Microgels are soft-material particles consisting of cross-linked polymer networks, 100 nm to 1 m in diameter, dispersed...

  8. First Direct Observation of Spinons and Holons

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    check on the interpretation of the data-were not available. The current observations are direct and the results are unambiguous because they were obtained from a simple material...

  9. Direct Imaging of Antiferromagnetic Vortex States

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Arenholz, A. Doran, A.T. Young, A. Scholl, C. Hwang, H.W. Zhao, J. Bokor, and Z.Q. Qiu, "Direct observation of imprinted antiferromagnetic vortex states in CoOFeAg(001) discs,"...

  10. First Direct Imaging of Swollen Microgel Particles

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Direct Imaging of Swollen Microgel Particles Print Microgels are soft-material particles consisting of cross-linked polymer networks, 100 nm to 1 m in diameter, dispersed in a...

  11. Extension of DOE Directives on Security

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-05-06

    The Notice extends the following directives until 12/31/02. DOE N 205.1, DOE N 205.2, DOE 205.3, DOE N 471.3, and DOE 473.6.

  12. Direct Imaging of Asymmetric Magnetization Reversal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and H. Ohldag, "Direct imaging of asymmetric magnetization reversal in exchange-biased FeMnPd bilayers by x-ray photoemission electron microscopy," Phys. Rev. Lett. 94, 107203...

  13. Direct Imaging of Asymmetric Magnetization Reversal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    H. Ohldag, "Direct imaging of asymmetric magnetization reversal in exchange-biased FeMnPd bilayers by x-ray photoemission electron microscopy," Phys. Rev. Lett. 94, 107203 (2005...

  14. Preparing for Hurricane Irene: Follow Local Direction

    Energy.gov [DOE]

    Hurricane Irene is heading towards the East Coast, and while the extent of its impact is not yet known, those who may be effected (even inland areas), should get prepared and follow the direction...

  15. Living Direct: Proposed Penalty (2011-CE-1904)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Living Direct, Inc. failed to certify a variety of dishwashers, refrigerator-freezers, and freezers as compliant with the applicable energy conservation standards.

  16. Reference book on geothermal direct use

    SciTech Connect (OSTI)

    Lienau, P.J.; Lund, J.W.; Rafferty, K.; Culver, G.

    1994-08-01

    This report presents the direct uses of geothermal energy in the United States. Topics discussed include: low-temperature geothermal energy resources; energy reserves; geothermal heat pumps; geothermal energy for residential buildings; and geothermal energy for industrial usage.

  17. Direct Numerical Simulation of Compressible, Turbulent Flow ...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The computational mesh for this direct numerical simulation was over 33 billion cells, and was run on up to 102,400 cores under a DoD HPCMP Frontier Project. Nicholas Bisek and ...

  18. Nanoscale Science, Engineering and Technology Research Directions

    SciTech Connect (OSTI)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  19. Directives & Documents | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Directives & Documents Directives & Documents Policy & Guidance Policy & Guidance contains Project Management related orders, guides, handbooks, templates, standard operating procedures, and industry standards that allow Federal Project Directors and project teams to comply with applicable laws and regulations while putting in place most effective project managemetn practices that increase probability of project success. Proceed to Policy & Guidance >> Publications

  20. Chapter 22 - Direct Loans and Loan Guarantees

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    8-31-11 22-1 CHAPTER 22 DIRECT LOANS AND LOAN GUARANTEES 1. PURPOSE. This chapter establishes the Department of Energy (DOE) accounting policy and procedures for direct loans and loan guarantees for non-Federal borrowers. 2. APPLICABILITY. a. Departmental Applicability. The applicability of this chapter is specified in Chapter 1, "Accounting Overview." b. DOE Contractors. This chapter does not apply to contractors. 3. REQUIREMENTS. a. Federal Credit Reform Act. The policies and

  1. Statutes, Regulations, and Directives for Classification Program |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Statutes, Regulations, and Directives for Classification Program Statutes, Regulations, and Directives for Classification Program Classification Atomic Energy Act of 1954 - Establishes Government-wide policies for classifying, safeguarding, and declassifying Restricted Data information. 10 CFR Part 1045, Nuclear Classification and Declassification - Establishes the Government-wide policies and procedures for implementing sections 141 and 142 of the Atomic Energy Act of

  2. News Item

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SPLEEM Specifications Electron energy typically 0 to 100 eV, energy width ~0.1 eV. Electron energy typically 0 to 100 eV, energy width ~0.1 eV. Spin-polarization (normally ~30 %) can be adjusted to point in any polar/azimuthal direction Spatial resolution ~10 nm laterally, atomic resolution along surface normal. Angular resolution of magnetization direction can be better than 2 deg. Time resolution: frame rate can be up to 20 fps, exposure time of several ms per frame is usually required for

  3. ARM: GRAMS: data from the total direct diffuse radiometer (TDDR...

    Office of Scientific and Technical Information (OSTI)

    direct diffuse radiometer (TDDR) Title: ARM: GRAMS: data from the total direct diffuse radiometer (TDDR) GRAMS: data from the total direct diffuse radiometer (TDDR) Authors: ...

  4. Program Peer Review New Directions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Peer Review New Directions Program Peer Review New Directions BETO Program Peer Review - New Directions, 2013 programmanagementreview2013directionsreed.pdf (1.03 MB) More ...

  5. Dosimetric characterization of a multileaf collimator for a new four-dimensional image-guided radiotherapy system with a gimbaled x-ray head, MHI-TM2000

    SciTech Connect (OSTI)

    Nakamura, Mitsuhiro; Sawada, Akira; Ishihara, Yoshitomo; Takayama, Kenji; Mizowaki, Takashi; Kaneko, Shuji; Yamashita, Mikiko; Tanabe, Hiroaki; Kokubo, Masaki; Hiraoka, Masahiro

    2010-09-15

    Purpose: To present the dosimetric characterization of a multileaf collimator (MLC) for a new four-dimensional image-guided radiotherapy system with a gimbaled x-ray head, MHI-TM2000. Methods: MHI-TM2000 has an x-ray head composed of an ultrasmall linear accelerator guide and a system-specific MLC. The x-ray head can rotate along the two orthogonal gimbals (pan and tilt rotations) up to {+-}2.5 deg., which swings the beam up to {+-}41.9 mm in each direction from the isocenter on the isocenter plane perpendicular to the beam. The MLC design is a single-focus type, has 30 pairs of 5 mm thick leaves at the isocenter, and produces a maximum field size of 150x150 mm{sup 2}. Leaf height and length are 110 and 260 mm, respectively. Each leaf end is circular, with a radius of curvature of 370 mm. The distance that each leaf passes over the isocenter is 77.5 mm. Radiation leakage between adjacent leaves is minimized by an interlocking tongue-and-groove (T and G) arrangement with the height of the groove part 55 mm. The dosimetric characterizations including field characteristics, leaf position accuracy, leakage, and T and G effect were evaluated using a well-commissioned 6 MV photon beam, EDR2 films (Kodak, Rochester, NY), and water-equivalent phantoms. Furthermore, the field characteristics and leaf position accuracy were evaluated under conditions of pan or tilt rotation. Results: The differences between nominal and measured field sizes were within {+-}0.5 mm. Although the penumbra widths were greater with wider field size, the maximum width was <5.5 mm even for the fully opened field. Compared to the results of field characteristics without pan or tilt rotation, the variation in field size, penumbra width, flatness, and symmetry was within {+-}1 mm/1% at the maximum pan or tilt rotational angle. The leaf position accuracy was 0.0{+-}0.1 mm, ranging from -0.3 to 0.2 mm at four gantry angles of 0 deg., 90 deg., 180 deg., and 270 deg. with and without pan or tilt rotation

  6. EA-280 Direct Energy Marketing Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Direct Energy Marketing Inc EA-280 Direct Energy Marketing Inc Order authorizing Direct Energy Marketing Inc to export electric energy to Canada. EA-280 Direct Energy Marketing Inc (1.62 MB) More Documents & Publications EA-280-B

  7. Draft STD-1027 Supplemental Directive (Alternate Hazard Categorization...

    Office of Environmental Management (EM)

    STD-1027 Supplemental Directive (Alternate Hazard Categorization) Methodology Draft STD-1027 Supplemental Directive (Alternate Hazard Categorization) Methodology Presentation from...

  8. Field free, directly heated lanthanum boride cathode

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Moussa, D.; Wilde, S.B.

    1987-02-02

    A directly heated cylindrical lanthanum boride cathode assembly is disclosed which minimizes generation of magnetic field which would interfere with electron emission from the cathode. The cathode assembly comprises a lanthanum boride cylinder in electrical contact at one end with a central support shaft which functions as one electrode to carry current to the lanthanum boride cylinder and in electrical contact, at its opposite end with a second electrode which is coaxially position around the central support shaft so that magnetic fields generated by heater current flowing in one direction through the central support shaft are cancelled by an opposite magnetic field generated by current flowing through the lanthanum boride cylinder and the coaxial electrode in a direction opposite to the current flow in the central shaft.

  9. Resource assessment for geothermal direct use applications

    SciTech Connect (OSTI)

    Beer, C.; Hederman, W.F. Jr.; Dolenc, M.R.; Allman, D.W.

    1984-04-01

    This report discusses the topic geothermal resource assessment and its importance to laymen and investors for finding geothermal resources for direct-use applications. These are applications where the heat from lower-temperature geothermal fluids, 120 to 200/sup 0/F, are used directly rather than for generating electricity. The temperatures required for various applications are listed and the various types of geothermal resources are described. Sources of existing resource data are indicated, and the types and suitability of tests to develop more data are described. Potential development problems are indicated and guidance is given on how to decrease technical and financial risk and how to use technical consultants effectively. The objectives of this report are to provide: (1) an introduction low-temperature geothermal resource assessment; (2) experience from a series of recent direct-use projects; and (3) references to additional information.

  10. Field free, directly heated lanthanum boride cathode

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Moussa, David; Wilde, Stephen B.

    1991-01-01

    A directly heated cylindrical lanthanum boride cathode assembly is disclosed which minimizes generation of magnetic fields which would interfere with electron emission from the cathode. The cathode assembly comprises a lanthanum boride cylinder in electrical contact at one end with a central support shaft which functions as one electrode to carry current to the lanthanum boride cylinder and in electrical contact, at its opposite end with a second electrode which is coaxially position around the central support shaft so that magnetic fields generated by heater current flowing in one direction through the central support shaft are cancelled by an opposite magnetic field generated by current flowing through the lanthanum boride cylinder and the coaxial electrode in a direction opposite to the current flow in the central shaft.

  11. Direct-Cooled Power Electronics Substrate

    SciTech Connect (OSTI)

    Wiles, R.; Ayers, C.; Wereszczak, A.

    2008-12-23

    The goal of the Direct-Cooled Power Electronics Substrate project is to reduce the size and weight of the heat sink for power electronics used in hybrid electric vehicles (HEVs) and plug-in hybrid electric vehicles (PHEVs). The concept proposed in this project was to develop an innovative power electronics mounting structure, model it, and perform both thermal and mechanical finite-element analysis (FEA). This concept involved integrating cooling channels within the direct-bonded copper (DBC) substrate and strategically locating these channels underneath the power electronic devices. This arrangement would then be directly cooled by water-ethylene glycol (WEG), essentially eliminating the conventional heat sink and associated heat flow path. The concept was evaluated to determine its manufacturability, its compatibility with WEG, and the potential to reduce size and weight while directly cooling the DBC and associated electronics with a coolant temperature of 105 C. This concept does not provide direct cooling to the electronics, only direct cooling inside the DBC substrate itself. These designs will take into account issues such as containment of the fluid (separation from the electronics) and synergy with the whole power inverter design architecture. In FY 2008, mechanical modeling of substrate and inverter core designs as well as thermal and mechanical stress FEA modeling of the substrate designs was performed, along with research into manufacturing capabilities and methods that will support the substrate designs. In FY 2009, a preferred design(s) will be fabricated and laboratory validation testing will be completed. In FY 2010, based on the previous years laboratory testing, the mechanical design will be modified and the next generation will be built and tested in an operating inverter prototype.

  12. Fermilab | Visit Fermilab | Hours, Maps and Directions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Map and directions Check the Fermilab home page for our latest news and a calendar of events, which also includes days that our main building and exhibits are closed. Map of Fermilab Fermilab site map (pdf) Directions to Fermilab Fermilab's main entrance is located at the intersection of Kirk Road and Pine Street in Batavia, Illinois, about 45 miles west of Chicago. Delivery trucks need to use the entrance at Kirk Road and Wilson Street. There is no street number assigned to this entrance

  13. Carbon nanotube formation by laser direct writing

    SciTech Connect (OSTI)

    Wu, Y.-T.; Su, H.-C.; Tsai, C.-M.; Liu, K.-L.; Chen, G.-D.; Huang, R.-H.; Yew, T.-R.

    2008-07-14

    This letter presents carbon nanotube (CNT) formation by laser direct writing using 248 nm KrF excimer pulsed laser in air at room temperature, which was applied to irradiate amorphous carbon (a-C) assisted by Ni catalysts underneath for the transformation of carbon species into CNTs. The CNTs were synthesized under appropriate combination of laser energy density and a-C thickness. The growth mechanism and key parameters to determine the success of CNT formation were also discussed. The demonstration of the CNT growth by laser direct writing in air at room temperature opens an opportunity of in-position CNT formation at low temperatures.

  14. Columbia Gas preserves wetlands with directional drilling

    SciTech Connect (OSTI)

    Luginbuhl, K.K.; Gartman, D.K.

    1995-10-01

    This paper reviews the use of directional drilling to install a 12 inch natural gas pipeline near Avon, Ohio. As a result of increased demand, the utility decided that it would need additional lines for pressure control with the only feasible route being through a forested and scrub/shrub wetland. This paper reviews the permitting requirements along with the directional drilling design and operation. Unfortunately during drilling, bentonite drilling fluids came to the surface requiring remedial action procedures. The paper then provides a detailed clean up strategy and makes recommendations on how to prevent such a break through in the future.

  15. Investigation of MSWI fly ash melting characteristic by DSC-DTA

    SciTech Connect (OSTI)

    Li, Rundong Wang, Lei; Yang, Tianhua; Raninger, Bernhard

    2007-07-01

    The melting process of MSWI (Municipal Solid Waste Incineration) fly ash has been studied by high-temperature DSC-DTA experiments. The experiments were performed at a temperature range of 20-1450 deg. C, and the considerable variables included atmosphere (O{sub 2} and N{sub 2}), heating rates (5 deg. C/min, 10 deg. C/min, 20 deg. C/min) and CaO addition. Three main transitions were observed during the melting process of fly ash: dehydration, polymorphic transition and fusion, occurring in the temperature range of 100-200 deg. C, 480-670 deg. C and 1101-1244 deg. C, respectively. The apparent heat capacity and heat requirement for melting of MSWI fly ash were obtained by DSC (Differential Scanning Calorimeter). A thermodynamic modeling to predict the heat requirements for melting process has been presented, and it agrees well with the experimental data. Finally, a zero-order kinetic model of fly ash melting transition was established. The apparent activation energy of MSWI fly ash melting transition was obtained.

  16. Compositions for directed alignment of conjugated polymers

    DOE Patents [OSTI]

    Kim, Jinsang; Kim, Bong-Gi; Jeong, Eun Jeong

    2016-04-19

    Conjugated polymers (CPs) achieve directed alignment along an applied flow field and a dichroic ratio of as high as 16.67 in emission from well-aligned thin films and fully realized anisotropic optoelectronic properties of CPs in field-effect transistor (FET).

  17. KLU2 Direct Linear Solver Package

    Energy Science and Technology Software Center (OSTI)

    2012-01-04

    KLU2 is a direct sparse solver for solving unsymmetric linear systems. It is related to the existing KLU solver, (in Amesos package and also as a stand-alone package from University of Florida) but provides template support for scalar and ordinal types. It uses a left looking LU factorization method.

  18. Power electronics substrate for direct substrate cooling

    DOE Patents [OSTI]

    Le, Khiet; Ward, Terence G.; Mann, Brooks S.; Yankoski, Edward P.; Smith, Gregory S.

    2012-05-01

    Systems and apparatus are provided for power electronics substrates adapted for direct substrate cooling. A power electronics substrate comprises a first surface configured to have electrical circuitry disposed thereon, a second surface, and a plurality of physical features on the second surface. The physical features are configured to promote a turbulent boundary layer in a coolant impinged upon the second surface.

  19. Geothermal Direct Use Technology and Marketplace Workshop

    Office of Energy Efficiency and Renewable Energy (EERE)

    Geothermal energy applications are emerging across a much wider spectrum of cascaded uses, from lower temperature geothermal energy production to direct heating and cooling, to agricultural uses. The Energy Department is at the forefront of this discussion, the workshop report addresses applications for the Eastern United States.

  20. Direct Kinetic Measurements of a Criegee Intermediate

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    J.D. Savee, D.L. Osborn, S.S. Vasu, C.J. Percival, D.E. Shallcross, and C.A. Taatjes, "Direct Kinetic Measurements of Criegee Intermediate (CH2OO) Formed by Reaction of CH2I...

  1. Extension of DOE Directives on Security

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-05-14

    The following directives are extended until 5/14/04. DOE O 470.1, DOE O 471.2A. DOE N 142.1 was originally approved without an expiration date and will, therefore, remain in effect until canceled.

  2. Characterization of precipitation behaviors in a non-stoichiometric Cu-24.5at.%Al-19.4at.%Mn alloy

    SciTech Connect (OSTI)

    Jeng, S.C.

    2011-02-15

    Scanning and transmission electron microscopy examinations of Cu-24.5at.% Al-19.4at.%Mn (similar to Cu{sub 2.2}Mn{sub 0.8}Al) alloy were performed after aging at temperatures ranging from 350 deg. C to 700 deg. C for various durations. It was observed that only {gamma}-brass type and L-J phases were formed after aging at or below 400 deg. C. On the other hand, the {beta}-Mn phase was formed after aging at temperatures ranging from 500 deg. C to 650 deg. C. It is noteworthy that the precipitation behaviors of the {gamma}-brass type and {beta}-Mn phases are different at different aging temperatures. This remarkable result differs from those reported in previous studies on the Cu{sub 3-X}Mn{sub X}Al alloys with X {<=} 1. - Research Highlights: {yields}Precipitation behaviors in a Cu{sub 2.2}Mn{sub 0.8}Al alloy shows different results from those reported in previous studies on the Cu-A-lMn alloys. {yields}The {gamma}-brass type precipitate occurs at temperatures ranging from 350 deg. C to 500 deg. C revealing different precipitation characteristics. {yields}The {beta}-Mn phase formed after aging at 500 deg. C to 650 deg. C shows different precipitation behaviors as well. {yields}L-J phase having an orthorhombic structure could be always observed in the as-quenched and aged conditions.

  3. Variable mode bi-directional and uni-directional computer communication system

    DOE Patents [OSTI]

    Cornett, Frank N.; Jenkins, Philip N.; Bowman, Terrance L.; Placek, Joseph M.; Thorson, Gregory M.

    2004-12-14

    A variable communication systems comprising a plurality of transceivers and a control circuit connected to the transceivers to configure the transceivers to operate in a bi-directional mode and a uni-directional mode at different times using different transfer methods to transfer data.

  4. Direct contact, binary fluid geothermal boiler

    DOE Patents [OSTI]

    Rapier, Pascal M.

    1982-01-01

    Energy is extracted from geothermal brines by direct contact with a working fluid such as isobutane which is immiscible with the brine in a geothermal boiler. The geothermal boiler provides a distributor arrangement which efficiently contacts geothermal brine with the isobutane in order to prevent the entrainment of geothermal brine in the isobutane vapor which is directed to a turbine. Accordingly the problem of brine carry-over through the turbine causes corrosion and scaling thereof is eliminated. Additionally the heat exchanger includes straightening vanes for preventing startup and other temporary fluctuations in the transitional zone of the boiler from causing brine carryover into the turbine. Also a screen is provided in the heat exchanger to coalesce the working fluid and to assist in defining the location of the transitional zone where the geothermal brine and the isobutane are initially mixed.

  5. Direct contact, binary fluid geothermal boiler

    DOE Patents [OSTI]

    Rapier, P.M.

    1979-12-27

    Energy is extracted from geothermal brines by direct contact with a working fluid such as isobutane which is immiscible with the brine in a geothermal boiler. The geothermal boiler provides a distributor arrangement which efficiently contacts geothermal brine with the isobutane in order to prevent the entrainment of geothermal brine in the isobutane vapor which is directed to a turbine. Accordingly the problem of brine carryover through the turbine causing corrosion and scaling thereof is eliminated. Additionally the heat exchanger includes straightening vanes for preventing startup and other temporary fluctuations in the transitional zone of the boiler from causing brine carryover into the turbine. Also a screen is provided in the heat exchanger to coalesce the working fluid and to assist in defining the location of the transitional zone where the geothermal brine and the isobutane are initially mixed.

  6. Direct current power delivery system and method

    DOE Patents [OSTI]

    Zhang, Di; Garces, Luis Jose; Dai, Jian; Lai, Rixin

    2016-09-06

    A power transmission system includes a first unit for carrying out the steps of receiving high voltage direct current (HVDC) power from an HVDC power line, generating an alternating current (AC) component indicative of a status of the first unit, and adding the AC component to the HVDC power line. Further, the power transmission system includes a second unit for carrying out the steps of generating a direct current (DC) voltage to transfer the HVDC power on the HVDC power line, wherein the HVDC power line is coupled between the first unit and the second unit, detecting a presence or an absence of the added AC component in the HVDC power line, and determining the status of the first unit based on the added AC component.

  7. New directions for the TEAM workshops

    SciTech Connect (OSTI)

    Turner, L.R.

    1992-12-31

    I consider it a great honor to be invited to speak at this, the first TEAM Workshop to take place in China. This is my first visit to China, and I am struck by the beauty of the country, by the kindness of the people I have met here, and by the rapid progress being made in every area. The topic I have chosen for this talk is ``New Directions for TEAM.`` But it has been said that in order to know where you are going, you must first know where you are and where you have been. So I will talk about the history and prehistory of the workshops and about some of their successes before I go on to my thoughts on new directions.

  8. New directions for the TEAM workshops

    SciTech Connect (OSTI)

    Turner, L.R.

    1992-01-01

    I consider it a great honor to be invited to speak at this, the first TEAM Workshop to take place in China. This is my first visit to China, and I am struck by the beauty of the country, by the kindness of the people I have met here, and by the rapid progress being made in every area. The topic I have chosen for this talk is New Directions for TEAM.'' But it has been said that in order to know where you are going, you must first know where you are and where you have been. So I will talk about the history and prehistory of the workshops and about some of their successes before I go on to my thoughts on new directions.

  9. Direct impact aerosol sampling by electrostatic precipitation

    DOE Patents [OSTI]

    Braden, Jason D.; Harter, Andrew G.; Stinson, Brad J.; Sullivan, Nicholas M.

    2016-02-02

    The present disclosure provides apparatuses for collecting aerosol samples by ionizing an air sample at different degrees. An air flow is generated through a cavity in which at least one corona wire is disposed and electrically charged to form a corona therearound. At least one grounded sample collection plate is provided downstream of the at least one corona wire so that aerosol ions generated within the corona are deposited on the at least one grounded sample collection plate. A plurality of aerosol samples ionized to different degrees can be generated. The at least one corona wire may be perpendicular to the direction of the flow, or may be parallel to the direction of the flow. The apparatus can include a serial connection of a plurality of stages such that each stage is capable of generating at least one aerosol sample, and the air flow passes through the plurality of stages serially.

  10. Codoped direct-gap semiconductor scintillators

    DOE Patents [OSTI]

    Derenzo, Stephen E.; Bourret-Courchesne, Edith; Weber, Marvin J.; Klintenberg, Mattias K.

    2006-05-23

    Fast, bright inorganic scintillators at room temperature are based on radiative electron-hole recombination in direct-gap semiconductors, e.g. CdS and ZnO. The direct-gap semiconductor is codoped with two different impurity atoms to convert the semiconductor to a fast, high luminosity scintillator. The codopant scheme is based on dopant band to dopant trap recombination. One dopant provides a significant concentration of carriers of one type (electrons or holes) and the other dopant traps carriers of the other type. Examples include CdS:In,Te; CdS:In,Ag; CdS:In,Na; ZnO:Ga,P; ZnO:Ga,N; ZnO:Ga,S; and GaN:Ge,Mg.

  11. Codoped direct-gap semiconductor scintillators

    DOE Patents [OSTI]

    Derenzo, Stephen Edward; Bourret-Courchesne, Edith; Weber, Marvin J.; Klintenberg, Mattias K.

    2008-07-29

    Fast, bright inorganic scintillators at room temperature are based on radiative electron-hole recombination in direct-gap semiconductors, e.g. CdS and ZnO. The direct-gap semiconductor is codoped with two different impurity atoms to convert the semiconductor to a fast, high luminosity scintillator. The codopant scheme is based on dopant band to dopant trap recombination. One dopant provides a significant concentration of carriers of one type (electrons or holes) and the other dopant traps carriers of the other type. Examples include CdS:In,Te; CdS:In,Ag; CdS:In,Na; ZnO:Ga,P; ZnO:Ga,N; ZnO:Ga,S; and GaN:Ge,Mg.

  12. Remote direct memory access over datagrams

    DOE Patents [OSTI]

    Grant, Ryan Eric; Rashti, Mohammad Javad; Balaji, Pavan; Afsahi, Ahmad

    2014-12-02

    A communication stack for providing remote direct memory access (RDMA) over a datagram network is disclosed. The communication stack has a user level interface configured to accept datagram related input and communicate with an RDMA enabled network interface card (NIC) via an NIC driver. The communication stack also has an RDMA protocol layer configured to supply one or more data transfer primitives for the datagram related input of the user level. The communication stack further has a direct data placement (DDP) layer configured to transfer the datagram related input from a user storage to a transport layer based on the one or more data transfer primitives by way of a lower layer protocol (LLP) over the datagram network.

  13. Development of Direct-Use Projects: Preprint

    SciTech Connect (OSTI)

    Lund, J.

    2011-01-01

    A geothermal direct-use project utilizes a natural resource, a flow of geothermal fluid at elevated temperatures, which is capable of providing heat and/or cooling to buildings, greenhouses, aquaculture ponds, and industrial processes. Geothermal utilization requires matching the varied needs of the user and characteristics of the resource in order to development a successful project. Each application is unique; guidelines are provided for the logical steps required to implement a project. Recommended temperature and flows are suggested for spas and pools, space and district heating, greenhouse and aquaculture pond heating, and industrial applications. Guidelines are provided for selecting the necessary equipment for successfully implementing a direct-use project, including downhole pumps, piping, heat exchangers, and heat convectors. Additionally, the relationship between temperature, flow rate, and the use of heat exchangers to provide heat to a space with hot water or hot air is provided for a number of applications, with suggested 'rules of thumb'.

  14. Extracting metals directly from metal oxides

    DOE Patents [OSTI]

    Wai, C.M.; Smart, N.G.; Phelps, C.

    1997-02-25

    A method of extracting metals directly from metal oxides by exposing the oxide to a supercritical fluid solvent containing a chelating agent is described. Preferably, the metal is an actinide or a lanthanide. More preferably, the metal is uranium, thorium or plutonium. The chelating agent forms chelates that are soluble in the supercritical fluid, thereby allowing direct removal of the metal from the metal oxide. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is selected from the group consisting of {beta}-diketones, halogenated {beta}-diketones, phosphinic acids, halogenated phosphinic acids, carboxylic acids, halogenated carboxylic acids, and mixtures thereof. In especially preferred embodiments, at least one of the chelating agents is fluorinated. The method provides an environmentally benign process for removing metals from metal oxides without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the metal recovered, to provide an economic, efficient process. 4 figs.

  15. Extracting metals directly from metal oxides

    DOE Patents [OSTI]

    Wai, Chien M.; Smart, Neil G.; Phelps, Cindy

    1997-01-01

    A method of extracting metals directly from metal oxides by exposing the oxide to a supercritical fluid solvent containing a chelating agent is described. Preferably, the metal is an actinide or a lanthanide. More preferably, the metal is uranium, thorium or plutonium. The chelating agent forms chelates that are soluble in the supercritical fluid, thereby allowing direct removal of the metal from the metal oxide. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is selected from the group consisting of .beta.-diketones, halogenated .beta.-diketones, phosphinic acids, halogenated phosphinic acids, carboxylic acids, halogenated carboxylic acids, and mixtures thereof. In especially preferred embodiments, at least one of the chelating agents is fluorinated. The method provides an environmentally benign process for removing metals from metal oxides without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the metal recovered, to provide an economic, efficient process.

  16. Jefferson Lab - Laboratory Directed Research & Development

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    an LDRD Proposal or LOI View FY17 LDRD Proposals Proposals from Previous Years Create an LDRD Project Report Mid-year Report Template Mid-year Report Instructions Annual Report Template Annual Report Instructions LDRD Reports LDRD Publications The JLab LDRD program documentation has been modeled on the material developed by SLAC for its LDRD program Laboratory Directed Research & Development Formal LDRD Plans FT16 Plan FY15 Plan FY14 Plan

  17. Laboratory Directed Research & Development (LDRD)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    LDRD Laboratory Directed Research & Development National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Gang Wu, left, and Piotr Zelenay examine a new non-precious-metal catalyst that can significantly reduce the cost of hydrogen fuel cells while maintaining performance. Gang Wu, left, and Piotr Zelenay examine a new non-precious-metal

  18. SRNL Laboratory Directed Research & Development (LDRD)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    6/2014 SEARCH SRNL GO About LDRD Initiatives & Research Priorities Current Projects LDRD Technologies LDRD Contacts LDRD Home SRNL Home SRNL Laboratory Directed Research & Development (LDRD) Resources LDRD Annual Reports * 2013 * 2012 * 2011 * 2010 DOE LDRD Homepage DOE Order FY13 SRNL LDRD Annual Report The FY13 SRNL LDRD Annual Report has been released This important program displays both the breadth of SRNL's research efforts and the depth of our commitment to expand the capability

  19. Polymeric assay film for direct colorimetric detection

    DOE Patents [OSTI]

    Charych, Deborah; Nagy, Jon; Spevak, Wayne

    1999-01-01

    A lipid bilayer with affinity to an analyte, which directly signals binding by a changes in the light absorption spectra. This novel assay means and method has special applications in the drug development and medical testing fields. Using a spectrometer, the system is easily automated, and a multiple well embodiment allows inexpensive screening and sequential testing. This invention also has applications in industry for feedstock and effluent monitoring.

  20. Polymeric assay film for direct colorimetric detection

    DOE Patents [OSTI]

    Charych, Deborah; Nagy, Jon; Spevak, Wayne

    2002-01-01

    A lipid bilayer with affinity to an analyte, which directly signals binding by a changes in the light absorption spectra. This novel assay means and method has special applications in the drug development and medical testing fields. Using a spectrometer, the system is easily automated, and a multiple well embodiment allows inexpensive screening and sequential testing. This invention also has applications in industry for feedstock and effluent monitoring.

  1. Ferrosilicon smelting in a direct current furnace

    DOE Patents [OSTI]

    Dosaj, Vishu D. (Midland, MI); May, James B. (Midland, MI)

    1992-12-29

    The present invention is a process for smelting ferrosilicon alloy. The process comprises adding a carbon source and tailings comprising oxides of silicon and iron to a substantially closed furnace. Heat is supplied to the furnace by striking a direct current arc between a cathode electrode and an anode functional hearth. In a preferred embodiment of the present invention, the cathode electrode is hollow and feed to the substantially closed furnace is through the hollow electrode.

  2. Ferrosilicon smelting in a direct current furnace

    DOE Patents [OSTI]

    Dosaj, V.D.; May, J.B.

    1992-12-29

    The present invention is a process for smelting ferrosilicon alloy. The process comprises adding a carbon source and tailings comprising oxides of silicon and iron to a substantially closed furnace. Heat is supplied to the furnace by striking a direct current arc between a cathode electrode and an anode functional hearth. In a preferred embodiment of the present invention, the cathode electrode is hollow and feed to the substantially closed furnace is through the hollow electrode. 1 figure.

  3. Directed Self-Assembly of Nanodispersions

    SciTech Connect (OSTI)

    Furst, Eric M

    2013-11-15

    Directed self-assembly promises to be the technologically and economically optimal approach to industrial-scale nanotechnology, and will enable the realization of inexpensive, reproducible and active nanostructured materials with tailored photonic, transport and mechanical properties. These new nanomaterials will play a critical role in meeting the 21st century grand challenges of the US, including energy diversity and sustainability, national security and economic competitiveness. The goal of this work was to develop and fundamentally validate methods of directed selfassembly of nanomaterials and nanodispersion processing. The specific aims were: 1. Nanocolloid self-assembly and interactions in AC electric fields. In an effort to reduce the particle sizes used in AC electric field self-assembly to lengthscales, we propose detailed characterizations of field-driven structures and studies of the fundamental underlying particle interactions. We will utilize microscopy and light scattering to assess order-disorder transitions and self-assembled structures under a variety of field and physicochemical conditions. Optical trapping will be used to measure particle interactions. These experiments will be synergetic with calculations of the particle polarizability, enabling us to both validate interactions and predict the order-disorder transition for nanocolloids. 2. Assembly of anisotropic nanocolloids. Particle shape has profound effects on structure and flow behavior of dispersions, and greatly complicates their processing and self-assembly. The methods developed to study the self-assembled structures and underlying particle interactions for dispersions of isotropic nanocolloids will be extended to systems composed of anisotropic particles. This report reviews several key advances that have been made during this project, including, (1) advances in the measurement of particle polarization mechanisms underlying field-directed self-assembly, and (2) progress in the

  4. Tuning the tunneling probability between low-dimensional electron systems by momentum matching

    SciTech Connect (OSTI)

    Zhou, Daming; Beckel, Andreas; Geller, Martin; Lorke, Axel; Ludwig, Arne; Wieck, Andreas D.

    2015-06-15

    We demonstrate the possibility to tune the tunneling probability between an array of self- assembled quantum dots and a two-dimensional electron gas (2DEG) by changing the energy imbalance between the dot states and the 2DEG. Contrary to the expectation from Fowler-Nordheim tunneling, the tunneling rate decreases with increasing injection energy. This can be explained by an increasing momentum mismatch between the dot states and the Fermi-circle in the 2DEG. Our findings demonstrate momentum matching as a useful mechanism (in addition to energy conservation, density of states, and transmission probability) to electrically control the charge transfer between quantum dots and an electron reservoir.

  5. METHOD FOR PRODUCING THORIUM TETRACHLORIDE

    DOE Patents [OSTI]

    Mason, E.A.; Cobb, C.M.

    1960-03-15

    A process for producing thorium tetrachloride from thorium concentrate comprises reacting thorium concentrates with a carbonaceous reducing agent in excess of 0.05 part by weight per part of thoriferous concentrate at a temperature in excess of 1300 deg C, cooling and comminuting the mass, chlorinating the resulting comminuting mass by suspending in a gaseous chlorinating agent in a fluidized reactor at a temperatare maintained between about l85 deg C and 770 deg C, and removing the resulting solid ThCl/sub 4/ from the reaction zone.

  6. PRODUCTION OF TRIFLUOROACETIC ACID COMPOUNDS

    DOE Patents [OSTI]

    Haworth, W.N.; Stacey, M.

    1949-08-30

    A process is described for the preparation of trifluoroacetic acid. Acetone vapor diluted wlth nitrogen and fluorine also diluted with nltrogen are fed separately at a temperature of about 210 deg C into a reaction vessel containing a catalyst mass selected from-the group consisting of silver and gold. The temperature in the reaction vessel is maintained in the range of 200 deg to 250 deg C. The reaction product, trifluoroacetyl fluoride, is absorbed in aqueous alkali solution. Trifluoroacetic acid is recovered from the solution by acidification wlth an acid such as sulfuric followed by steam distillation.

  7. PRODUCTION OF PLUTONIUM FLUORIDE FROM BISMUTH PHOSPHATE PRECIPITATE CONTAINING PLUTONIUM VALUES

    DOE Patents [OSTI]

    Brown, H.S.; Bohlmann, E.G.

    1961-05-01

    A process is given for separating plutonium from fission products present on a bismuth phosphate carrier. The dried carrier is first treated with hydrogen fluoride at between 500 and 600 deg C whereby some fission product fluorides volatilize away from plutonium tetrafluoride, and nonvolatile fission product fluorides are formed then with anhydrous fluorine at between 400 and 500 deg C. Bismuth and plutonium distill in the form of volatile fluorides away from the nonvolatile fission product fluorides. The bismuth and plutonium fluorides are condensed at below 290 deg C.

  8. The evolution of microstructure and photoluminescence of SiCN films with annealing temperature

    SciTech Connect (OSTI)

    Du Xiwen; Fu Yang; Sun Jing; Yao Pei

    2006-05-01

    Silicon carbonitride (SiCN) films were deposited by radio-frequency magnetron sputtering and then annealed at different temperatures from 1100 to 1300 deg. C in hydrogen atmosphere. The as-deposited films and films annealed at 1100 deg. C did not show photoluminescence (PL), whereas strong PL peaks appeared at 355 and 469 nm after annealing at 1200 and 1300 deg. C. X-ray diffraction, transmission electron microscope, and Fourier transform infrared spectrometer results show that the enhancement of PL properties is due to the change of microstructure and composition.

  9. CFPL installs products pipeline with directional drilling

    SciTech Connect (OSTI)

    1996-01-01

    Central Florida Pipeline Company (CFPL), a subsidiary of GATX Terminals Corp., Tampa, FL, has used directional drilling under seven water bodies in Hillsborough, Polk and Osceola Counties in constructing its new pipeline from Tampa to Orlando. Primary reason for using directional drilling is to protect the environment by minimizing water turbidity while the 16-inch diameter, 109-mile refined petroleum products pipeline is being installed. Total cost of the project is pegged at $68.5 million. Directional drilling enabled the pipe to be placed about 20 feet below the bottom of: The Alafia River in Riverview with 999 feet drilled; Port Sutton Channel near the Port of Tampa with 2,756 feet drilled; Reedy Creek Swamp at the intersection of Interstate 4 and Highway 192 which had 1,111 feet drilled; Wetland {number_sign}70 southwest of Lake Wales with 1,575 feet drilled; Peace River south of Bartow had 2,470 feet drilled; Bonnet Creek west of Kissimmee had 693 feet drilled. Shingle Creek near the borders of Osceola and Orange Counties with 1,700 feet drilled. This paper reviews the design plans for construction and the emergency response plans should a rupture occur in the line.

  10. European Lean Gasoline Direct Injection Vehicle Benchmark

    SciTech Connect (OSTI)

    Chambon, Paul H; Huff, Shean P; Edwards, Kevin Dean; Norman, Kevin M; Prikhodko, Vitaly Y; Thomas, John F

    2011-01-01

    Lean Gasoline Direct Injection (LGDI) combustion is a promising technical path for achieving significant improvements in fuel efficiency while meeting future emissions requirements. Though Stoichiometric Gasoline Direct Injection (SGDI) technology is commercially available in a few vehicles on the American market, LGDI vehicles are not, but can be found in Europe. Oak Ridge National Laboratory (ORNL) obtained a European BMW 1-series fitted with a 2.0l LGDI engine. The vehicle was instrumented and commissioned on a chassis dynamometer. The engine and after-treatment performance and emissions were characterized over US drive cycles (Federal Test Procedure (FTP), the Highway Fuel Economy Test (HFET), and US06 Supplemental Federal Test Procedure (US06)) and steady state mappings. The vehicle micro hybrid features (engine stop-start and intelligent alternator) were benchmarked as well during the course of that study. The data was analyzed to quantify the benefits and drawbacks of the lean gasoline direct injection and micro hybrid technologies from a fuel economy and emissions perspectives with respect to the US market. Additionally that data will be formatted to develop, substantiate, and exercise vehicle simulations with conventional and advanced powertrains.

  11. EA-278 Direct Commodities Trading Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Direct Commodities Trading Inc EA-278 Direct Commodities Trading Inc Order authorizing Direct Commodities Trading Inc to export electric energy to Canada. OE-278 Direct Commodities Trading Inc (1.1 MB) More Documents & Publications EA-278-B Direct Commodities Trading Inc - Recission

  12. EA-280-A Direct Energy Marketing Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    -A Direct Energy Marketing Inc EA-280-A Direct Energy Marketing Inc Order authorizing Direct Energy Marketing Inc to export electric energy to Canada. EA-280-A Direct Energy Marketing Inc (1.77 MB) More Documents & Publications EA-280-B Direct Energy Marketing Inc EA-280

  13. Direct Liquid Cooling for Electronic Equipment

    SciTech Connect (OSTI)

    Coles, Henry; Greenberg, Steve

    2014-03-01

    This report documents a demonstration of an electronic--equipment cooling system in the engineering prototype development stage that can be applied in data centers. The technology provides cooling by bringing a water--based cooling fluid into direct contact with high--heat--generating electronic components. This direct cooling system improves overall data center energy efficiency in three ways: High--heat--generating electronic components are more efficiently cooled directly using water, capturing a large portion of the total electronic equipment heat generated. This captured heat reduces the load on the less--efficient air--based data center room cooling systems. The combination contributes to the overall savings. The power consumption of the electronic equipment internal fans is significantly reduced when equipped with this cooling system. The temperature of the cooling water supplied to the direct cooling system can be much higher than that commonly provided by facility chilled water loops, and therefore can be produced with lower cooling infrastructure energy consumption and possibly compressor-free cooling. Providing opportunities for heat reuse is an additional benefit of this technology. The cooling system can be controlled to produce high return water temperatures while providing adequate component cooling. The demonstration was conducted in a data center located at Lawrence Berkeley National Laboratory in Berkeley, California. Thirty--eight servers equipped with the liquid cooling system and instrumented for energy measurements were placed in a single rack. Two unmodified servers of the same configuration, located in an adjacent rack, were used to provide a baseline. The demonstration characterized the fraction of heat removed by the direct cooling technology, quantified the energy savings for a number of cooling infrastructure scenarios, and provided information that could be used to investigate heat reuse opportunities. Thermal measurement data were used

  14. WP-07 IP Direct Testimony (wp07/initial)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    total of twenty (20) direct testimony documents that have been packaged into three (3) books (see below). This page provides direct links to the Direct Testimony books on the Rate...

  15. Directives for Review by EO FY 2014 - DOE Directives, Delegations, and

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Requirements by EO FY 2014 by Diane Johnson PDF document icon DirectivesUpForReviewBy9-30-14.pdf - PDF document, 67 KB (68722

  16. Memo to Reactivate a Directive Placed on Hold for DOE - DOE Directives,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Delegations, and Requirements DOE by Website Administrator application/vnd.openxmlformats-officedocument.wordprocessingml.document icon memo_to_reactivate_directive_on_hold_doe -5.docx - application/vnd.openxmlformats-officedocument.wordprocessingml.document, 15 KB (15629

  17. Memo to Reactivate a Directive Placed on Hold for NNSA - DOE Directives,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Delegations, and Requirements NNSA by Website Administrator Microsoft Word Document icon memo_to_reactivate_directive_on_hold_nnsa -5 (1).doc - Microsoft Word Document, 25 KB (26112

  18. Directives Due for Review Before 9-30-2016 - DOE Directives, Delegations,

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and Requirements Due for Review Before 9-30-2016 by Diane Johnson PDF document icon DirectivesUpForReview-EOFY2016.pdf - PDF document, 245 KB (251440 bytes)

  19. Low Temperature, Self-nucleated Growth of Indium Tin Oxide Nanostructures by Pulsed Laser Deposition in Argon

    SciTech Connect (OSTI)

    Tan, S. S.; Lee, W. K.; Kee, Y. Y.; Wong, H. Y.; Tou, T. Y.

    2011-03-30

    Indium tin oxide (ITO) nanostructures were successfully deposited on glass substrate by pulsed laser ablation in argon gas at 250 deg. C. Microstructural changes were observed in the argon gas pressure between 30 to 50 mTorr. The as-grown, nanostructured ITO exhibit In{sub 2}O{sub 3} bixbyite structure orientated at <111> direction. At the initial stage of growth, there was a large number of nucleation sites detected which eventually evolved into needle-like branches. The presence of spheres at the tip of these branches indicates that these nanostructured ITO were likely governed by vapor-liquid-solid (VLS) growth mechanism.

  20. DIRECT FUEL CELL/TURBINE POWER PLANT

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2004-11-01

    This report includes the progress in development of Direct FuelCell/Turbine{reg_sign} (DFC/T{reg_sign}) power plants for generation of clean power at very high efficiencies. The DFC/T power system is based on an indirectly heated gas turbine to supplement fuel cell generated power. The DFC/T power generation concept extends the high efficiency of the fuel cell by utilizing the fuel cell's byproduct heat in a Brayton cycle. Features of the DFC/T system include: electrical efficiencies of up to 75% on natural gas, 60% on coal gas, minimal emissions, simplicity in design, direct reforming internal to the fuel cell, reduced carbon dioxide release to the environment, and potential cost competitiveness with existing combined cycle power plants. The operation of sub-MW hybrid Direct FuelCell/Turbine power plant test facility with a Capstone C60 microturbine was initiated in March 2003. The inclusion of the C60 microturbine extended the range of operation of the hybrid power plant to higher current densities (higher power) than achieved in previous tests using a 30kW microturbine. The design of multi-MW DFC/T hybrid systems, approaching 75% efficiency on natural gas, was initiated. A new concept was developed based on clusters of One-MW fuel cell modules as the building blocks. System analyses were performed, including systems for near-term deployment and power plants with long-term ultra high efficiency objectives. Preliminary assessment of the fuel cell cluster concept, including power plant layout for a 14MW power plant, was performed.

  1. Bi-Directional Fast Charging Study Report

    SciTech Connect (OSTI)

    Tyler Gray

    2012-02-01

    This report details the hardware and software infrastructure needed to demonstrate the possibility of utilizing battery power in plug-in hybrid electric vehicles (PHEVs) and electric vehicles (EVs) with a bi directional fast charger to support/offset peak building loads. This document fulfills deliverable requirements for Tasks 1.2.1.2, 1.2.1.3, and 1.2.1.4 of Statement of Work (SOW) No.5799 for Electric Transportation Engineering Corporation, now ECOtality North America (NA) support for the Idaho National Laboratory (INL).

  2. Direct metal brazing to cermet feedthroughs

    DOE Patents [OSTI]

    Not Available

    1982-07-29

    An improved method for brazing metallic components to a cermet surface in an alumina substrate eliminates the prior art metallized layer over the cermet via and adjoining alumina surfaces. Instead, a nickel layer is applied over the cermet surface only and metallic components are brazed directly to this nickel coated cermet surface. As a result, heretofore unachievable tensile strength joints are produced. In addition, cermet vias with their brazed metal components can be spaced more closely in the alumina substrate because of the elimination of the prior art metallized alumina surfaces.

  3. Direct metal brazing to cermet feedthroughs

    DOE Patents [OSTI]

    Hopper, Jr., Albert C.

    1984-12-18

    An improved method for brazing metallic components to a cermet surface in an alumina substrate eliminates the prior art metallized layer over the cermet via and adjoining alumina surfaces. Instead, a nickel layer is applied over the cermet surface only and metallic components are brazed directly to this nickel coated cermet surface. As a result, heretofore unachievable tensile strength joints are produced. In addition, cermet vias with their brazed metal components can be spaced more closely in the alumina substrate because of the elimination of the prior art metallized alumina surfaces.

  4. Count Directive No. Title OPI Approval Date

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Due for Review Before 9/30/2016 Count Directive No. Title OPI Approval Date 1 DOE G 414.1-2B Quality Assurance Program Guide AU 8/16/2011 2 DOE G 414.1-4 Safety Software Guide for Use with 10 CFR 830, Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance AU 6/17/2005 3 DOE G 421.1-2A Implementation Guide for Use in Developing Documented Safety Analyses to Meet Subpart B of 10 CFR 830 AU 12/19/2011 4 DOE G 424.1-1B Implementation Guide for Use in Addressing Unreviewed

  5. Direct access inter-process shared memory

    DOE Patents [OSTI]

    Brightwell, Ronald B; Pedretti, Kevin; Hudson, Trammell B

    2013-10-22

    A technique for directly sharing physical memory between processes executing on processor cores is described. The technique includes loading a plurality of processes into the physical memory for execution on a corresponding plurality of processor cores sharing the physical memory. An address space is mapped to each of the processes by populating a first entry in a top level virtual address table for each of the processes. The address space of each of the processes is cross-mapped into each of the processes by populating one or more subsequent entries of the top level virtual address table with the first entry in the top level virtual address table from other processes.

  6. Redding Direct Interconnection Project, Shasta County, California:

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    As required under the California Environemtnal Quality Act (CEQA), the City of Redding (City) has prepared an Environmental Impact report (EIR) for the proposed Direct interconnection Project. Western Area Power Administration (Western) is also required to prepare an environmental assessment (EA) under the National Environmental Policy Act (NEPA) due to its involvement in the Project. Since the City has alrady prepared their EIR, this EA will briefly summarize the impact assessment field work and findings from the City's EIR. The EIR is attached as an appendix to this EA. 21 refs., 20 figs., 10 tabs.

  7. Hybrid high direct current circuit interrupter

    DOE Patents [OSTI]

    Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

    1998-08-11

    A device and a method are disclosed for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens. 7 figs.

  8. Direct electrochemical reduction of metal-oxides

    DOE Patents [OSTI]

    Redey, Laszlo I.; Gourishankar, Karthick

    2003-01-01

    A method of controlling the direct electrolytic reduction of a metal oxide or mixtures of metal oxides to the corresponding metal or metals. A non-consumable anode and a cathode and a salt electrolyte with a first reference electrode near the non-consumable anode and a second reference electrode near the cathode are used. Oxygen gas is produced and removed from the cell. The anode potential is compared to the first reference electrode to prevent anode dissolution and gas evolution other than oxygen, and the cathode potential is compared to the second reference electrode to prevent production of reductant metal from ions in the electrolyte.

  9. EIS-0123: Direct Service Industry Options

    Energy.gov [DOE]

    BPA proposes to implement one or more options to reduce load fluctuations and revenue uncertainty resulting from its electrical service to 10 aluminum smelters and its other direct service industrial customers. BPA believes these options will give BPA greater ability to plan for power needs and help to maintain its relatively strong financial position during the current period of power surplus. They also are expected to enhance BPA's ability to repay the U.S. Treasury. In turn, BPA rates to other customers would stabilize.

  10. Bi-directional planar slide mechanism

    DOE Patents [OSTI]

    Bieg, Lothar F.

    2003-11-04

    A bi-directional slide mechanism. A pair of master and slave disks engages opposite sides of the platform. Rotational drivers are connected to master disks so the disks rotate eccentrically about their respective axes of rotation. Opposing slave disks are connected to master disks on opposite sides of the platform by a circuitous mechanical linkage, or are electronically synchronized together using stepper motors, to effect coordinated motion. The synchronized eccentric motion of the pairs of master/slave disks compels smooth linear motion of the platform forwards and backwards without backlash. The apparatus can be incorporated in a MEMS device.

  11. MELs: Context, Past Success, and Future Directions

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    MELs: Context, Past Success, and Future Directions Leo Rainer DOE MELs Workshop June 3, 2016 MELs Have Been Called Many Things ● "Other" (Meier, 1987) ● "Miscellaneous" (Meier, 1992) ● The subset of standby: ○ "leaking electricity" (Sandberg, 1993) ○ "vampire loads" (anon. ~1999) ○ "wall warts" (anon. ~1998) ○ "lopomo" - LOw POwer MOde-energy use (Meier ~2004) ● Plug Loads (many conflicting definitions) ●

  12. Improved Direct Methanol Fuel Cell Stack

    SciTech Connect (OSTI)

    Wilson, Mahlon S.; Ramsey, John C.

    2005-03-08

    A stack of direct methanol fuel cells exhibiting a circular footprint. A cathode and anode manifold, tie-bolt penetrations and tie-bolts are located within the circular footprint. Each fuel cell uses two graphite-based plates. One plate includes a cathode active area that is defined by serpentine channels connecting the inlet and outlet cathode manifold. The other plate includes an anode active area defined by serpentine channels connecting the inlet and outlet of the anode manifold, where the serpentine channels of the anode are orthogonal to the serpentine channels of the cathode. Located between the two plates is the fuel cell active region.

  13. Direct Chemical Oxidation. Innovative Technology Summary Report

    SciTech Connect (OSTI)

    1998-12-01

    The DOE complex has a need to demonstrate technologies that are alternatives to incineration for the destruction of organic solvents, chlorinated hydrocarbons, plastics, and organic solids. The current industry practice for the targeted waste streams is treatment by incineration. There has been increased public concern on the use of incinerators because of the potential release of products of incomplete combustion, dioxins, furans, and emission of radionuclides. Direct Chemical Oxidation is a technology for the destruction of organic solids and liquids that uses peroxydisulfate as the oxidant to destroy organics and treats residue immobilized using phosphate ceramic solidification.

  14. Direct growth of graphene on Si(111)

    SciTech Connect (OSTI)

    Thanh Trung, Pham Joucken, Frdric; Colomer, Jean-Franois; Robert, Sporken; Campos-Delgado, Jessica; Raskin, Jean-Pierre; Hackens, Benot; Santos, Cristiane N.

    2014-06-14

    Due to the need of integrated circuit in the current silicon technology, the formation of graphene on Si wafer is highly desirable, but is still a challenge for the scientific community. In this context, we report the direct growth of graphene on Si(111) wafer under appropriate conditions using an electron beam evaporator. The structural quality of the material is investigated in detail by reflection high energy electron diffraction, Auger electron spectroscopy, X-ray photoemission spectroscopy, Raman spectroscopy, high resolution scanning electron microscopy, atomic force microscopy, and scanning tunneling microscopy. Our experimental results confirm that the quality of graphene is strongly dependent on the growth time during carbon atoms deposition.

  15. Soft-commutated direct current motor

    DOE Patents [OSTI]

    Hsu, J.S.

    1999-07-27

    A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A[prime], B and B[prime] to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation. 13 figs.

  16. Soft-commutated direct current motor

    DOE Patents [OSTI]

    Hsu, John S.

    1999-01-01

    A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A', B and B' to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation.

  17. Hybrid high direct current circuit interrupter

    DOE Patents [OSTI]

    Rockot, Joseph H.; Mikesell, Harvey E.; Jha, Kamal N.

    1998-01-01

    A device and a method for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens.

  18. Carbon aerogel electrodes for direct energy conversion

    DOE Patents [OSTI]

    Mayer, Steven T. (San Leandro, CA); Kaschmitter, James L. (Pleasanton, CA); Pekala, Richard W. (Pleasant Hill, CA)

    1997-01-01

    A direct energy conversion device, such as a fuel cell, using carbon aerogel electrodes, wherein the carbon aerogel is loaded with a noble catalyst, such as platinum or rhodium and soaked with phosphoric acid, for example. A separator is located between the electrodes, which are placed in a cylinder having plate current collectors positioned adjacent the electrodes and connected to a power supply, and a pair of gas manifolds, containing hydrogen and oxygen positioned adjacent the current collectors. Due to the high surface area and excellent electrical conductivity of carbon aerogels, the problems relative to high polarization resistance of carbon composite electrodes conventionally used in fuel cells are overcome.

  19. Carbon aerogel electrodes for direct energy conversion

    DOE Patents [OSTI]

    Mayer, S.T.; Kaschmitter, J.L.; Pekala, R.W.

    1997-02-11

    A direct energy conversion device, such as a fuel cell, using carbon aerogel electrodes is described, wherein the carbon aerogel is loaded with a noble catalyst, such as platinum or rhodium and soaked with phosphoric acid, for example. A separator is located between the electrodes, which are placed in a cylinder having plate current collectors positioned adjacent the electrodes and connected to a power supply, and a pair of gas manifolds, containing hydrogen and oxygen positioned adjacent the current collectors. Due to the high surface area and excellent electrical conductivity of carbon aerogels, the problems relative to high polarization resistance of carbon composite electrodes conventionally used in fuel cells are overcome. 1 fig.

  20. DIRECT COUPLED PROGRESSIVE STAGE PULSE COUNTER APPARATUS

    DOE Patents [OSTI]

    Kaufman, W.M.

    1962-08-14

    A progressive electrical pulse counter circuit was designed for the counting of a chain of input pulses of random width and/or frequency. The circuit employs an odd and even pulse input line alternately connected to a series of directly connected bistable counting stages. Each bistable stage has two d-c operative states which stage, when in its rnrtial state, prevents the next succeeding stage from changing its condition when the latter stage is pulsed. Since only altennate stages are pulsed for each incoming pulse, only one stage will change its state for each input pulse thereby providing prog essive stage by stage counting. (AEC)

  1. Novel Approach to Advanced Direct Methanol Fuel Cell Anode Catalysts...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Approach to Advanced Direct Methanol Fuel Cell Anode Catalysts Novel Approach to Advanced Direct Methanol Fuel Cell Anode Catalysts Presented at the Department of Energy Fuel Cell ...

  2. Novel Materials for High Efficiency Direct Methanol Fuel Cells...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Materials for High Efficiency Direct Methanol Fuel Cells Novel Materials for High Efficiency Direct Methanol Fuel Cells Presented at the Department of Energy Fuel Cell Projects ...

  3. The Effective Field Theory of Dark Matter Direct Detection (Journal...

    Office of Scientific and Technical Information (OSTI)

    Effective Field Theory of Dark Matter Direct Detection Citation Details In-Document Search Title: The Effective Field Theory of Dark Matter Direct Detection You are accessing a...

  4. Advantages of Oxygenates Fuels over Gasoline in Direct Injection...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Advantages of Oxygenates Fuels over Gasoline in Direct Injection Spark Ignition Engines Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) ...

  5. Nitrogen Control in Electric Arc Furnace Steelmaking by Direct...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Nitrogen Control in Electric Arc Furnace Steelmaking by Direct Reduced Iron Fines Injection Nitrogen Control in Electric Arc Furnace Steelmaking by Direct Reduced Iron Fines ...

  6. Summary of Investigations on Technical Feasibility of Direct...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Summary of Investigations on Technical Feasibility of Direct Disposal of Dual-Purpose Canisters R1 Summary of Investigations on Technical Feasibility of Direct Disposal of ...

  7. Appendix B: Rules and Directives Applicable to Nuclear Facilities...

    Energy Savers

    Appendix B: Rules and Directives Applicable to Nuclear Facilities Line Management Oversight Appendix B: Rules and Directives Applicable to Nuclear Facilities Line Management ...

  8. Direct synchrotron x-ray measurements of local strain fields...

    Office of Scientific and Technical Information (OSTI)

    Accepted Manuscript: Direct synchrotron x-ray measurements of local strain fields in ... September 3, 2016 Title: Direct synchrotron x-ray measurements of local strain fields in ...

  9. Worker Safety and Health Rules, Directives, and Technical Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Worker Safety and Health Rules, Directives, and Technical Standards Worker Safety and Health Rules, Directives, and Technical Standards Document Number Title Date 10 CFR 707 ...

  10. DOE - NNSA/NFO -- Directions to the Nevada Field Office

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Information > Directions NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Directions to the Nevada Field Office The Department of Energy, Nevada Field Office is ...

  11. Expanding Geothermal Resource Utilization in Nevada through Directed...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Expanding Geothermal Resource Utilization in Nevada through Directed Research and Public Outreach Expanding Geothermal Resource Utilization in Nevada through Directed Research and ...

  12. Directions | U.S. DOE Office of Science (SC)

    Office of Science (SC) [DOE]

    Directions Fusion Energy Sciences (FES) FES Home About Organization Chart .pdf file (49KB) Staff FES Budget FES Committees of Visitors Directions Jobs Fusion and Plasmas Research ...

  13. Los Alamos shares Nano 50 award for directed assembly

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Nano 50 award for directed assembly Los Alamos shares Nano 50 award for directed assembly Nano 50 Awards recognize "the top 50 technologies, products, and innovators that have ...

  14. A High Temperature Direct Vehicle Exhaust Flowmeter for Heavy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A High Temperature Direct Vehicle Exhaust Flowmeter for Heavy Duty Diesel Emission Measurements. A High Temperature Direct Vehicle Exhaust Flowmeter for Heavy Duty Diesel Emission ...

  15. Category:Geothermal Low Temperature Direct Use Facilities | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Geothermal Low Temperature Direct Use Facilities Jump to: navigation, search Low Temperature Direct Use Geothermal Facilities. Add a Low Temperature Geothermal Facility Pages in...

  16. POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition...

    Energy.gov (indexed) [DOE]

    THIS GUIDANCE HAS EXPIRED This Policy on Direct Hire Authority for Acquisition Positions has been replaced by POLICY GUIDANCE MEMORANDUM 34B Direct Hire Authority for Contract ...

  17. Polyvinylidene Fluoride-Based Membranes for Direct Methanol Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon Polyvinylidene Fluoride-Based Membranes for Direct Methanol Fuel Cell Applications Webinar Slides More Documents & Publications Novel Materials for High Efficiency Direct ...

  18. Science Overview Document Indirect and Semi-Direct Aerosol Campaign...

    Office of Scientific and Technical Information (OSTI)

    Science Overview Document Indirect and Semi-Direct Aerosol Campaign (ISDAC) April 2008 Citation Details In-Document Search Title: Science Overview Document Indirect and Semi-Direct ...

  19. Project Profile: Sensible Heat, Direct, Dual-Media Thermal Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sensible Heat, Direct, Dual-Media Thermal Energy Storage Module Project Profile: Sensible Heat, Direct, Dual-Media Thermal Energy Storage Module Acciona logo Acciona Solar, under ...

  20. Direct-Current Resistivity Survey At Cove Fort Area (Warpinski...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Cove Fort Area (Warpinski, Et Al., 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  1. Direct-Current Resistivity At Honokowai Area (Thomas, 1986) ...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity At Honokowai Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity At...

  2. Direct-Current Resistivity At Lualualei Valley Area (Thomas,...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity At Lualualei Valley Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity At...

  3. Direct-Current Resistivity Survey At Hualalai Northwest Rift...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Hualalai Northwest Rift Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  4. Direct-Current Resistivity At Hualalai Northwest Rift Area (Thomas...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity At Hualalai Northwest Rift Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  5. Direct-Current Resistivity Survey At Lualualei Valley Area (Thomas...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Lualualei Valley Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  6. Direct-Current Resistivity Survey At Roosevelt Hot Springs Area...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Roosevelt Hot Springs Area (Combs 2006) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  7. Direct-Current Resistivity Survey At Honokowai Area (Thomas,...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Honokowai Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity...

  8. Direct-Current Resistivity Survey At Cove Fort Area - Liquid...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Cove Fort Area - Liquid (Combs 2006) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  9. Direct-Current Resistivity At Lahaina-Kaanapali Area (Thomas...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity At Lahaina-Kaanapali Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity At...

  10. Direct-Current Resistivity Survey At Lahaina-Kaanapali Area ...

    Open Energy Information (Open El) [EERE & EIA]

    Direct-Current Resistivity Survey At Lahaina-Kaanapali Area (Thomas, 1986) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current...

  11. HPBA Comments NOPR on Energy Conservation Standards for Direct...

    Energy Savers

    HPBA Comments NOPR on Energy Conservation Standards for Direct Heating Equipment HPBA Comments NOPR on Energy Conservation Standards for Direct Heating Equipment The Hearth, Patio ...

  12. HPBA Comments NOPR on Energy Conservation Standards for Direct...

    Office of Environmental Management (EM)

    Comments NOPR on Energy Conservation Standards for Direct Heating Equipment HPBA Comments NOPR on Energy Conservation Standards for Direct Heating Equipment The Hearth, Patio & ...

  13. President Obama Signs New Directive to Strengthen our Work to...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    President Obama Signs New Directive to Strengthen our Work to Advance Gender Equality Worldwide President Obama Signs New Directive to Strengthen our Work to Advance Gender ...

  14. Direct Determination of the Chemical Bonding of Individual Impurities...

    Office of Scientific and Technical Information (OSTI)

    Publisher's Accepted Manuscript: Direct Determination of the Chemical Bonding of Individual Impurities in Graphene Prev Next Title: Direct Determination of the Chemical ...

  15. Direct Use for Building Heat and Hot Water Presentation Slides...

    Energy Savers

    Direct Use for Building Heat and Hot Water Presentation Slides and Text Version Direct Use for Building Heat and Hot Water Presentation Slides and Text Version Download ...

  16. Geothermal Direct Use Technology & Marketplace Workshop Summary

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    GEOTHERMAL DIRECT USE TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................ 1 WORKSHOP SUMMARY ........................................................................................................................ 2 GEOTHERMAL RESOURCES IN THE EASTERN UNITED STATES .............................................................. 3 GEOTHERMAL DEEP DIRECT USE TECHNOLOGY

  17. Mass Production Cost Estimation of Direct Hydrogen PEM Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Direct Hydrogen PEM Fuel Cell Systems for Transportation Applications: 2012 Update Mass Production Cost Estimation of Direct Hydrogen PEM Fuel Cell Systems for Transportation ...

  18. Chrysler Pentastar direct hydrogen fuel cell program

    SciTech Connect (OSTI)

    Kimble, M.; Deloney, D.

    1995-08-01

    The Chrysler Pentastar Electronics, Inc. Direct Hydrogen Fueled PEM Fuel Cell Hybrid Vehicle Program (DPHV) was initiated 1 July, 1994 with the following mission, {open_quotes}Design, fabricate, and test a Direct Hydrogen Fueled Proton Exchange Membrane (PEM) Fuel Cell System including onboard hydrogen storage, an efficient lightweight fuel cell, a gas management system, peak power augmentation and a complete system controls that can be economically mass produced and comply with all safety environmental and consumer requirements for vehicle applications for the 21st century.{close_quotes} The Conceptual Design for the entire system based upon the selection of an applicable vehicle and performance requirements that are consistent with the PNGV goals will be discussed. A Hydrogen Storage system that has been selected, packaged, and partially tested in accordance with perceived Hydrogen Safety and Infrastructure requirements will be discussed in addition to our Fuel Cell approach along with design of the {open_quotes}real{close_quotes} module. The Gas Management System and the Load Leveling System have been designed and the software programs have been developed and will be discussed along with a complete fuel cell test station that has the capability to test up to a 60 kW fuel cell system.

  19. Geysers advanced direct contact condenser research

    SciTech Connect (OSTI)

    Henderson, J.; Bahning, T.; Bharathan, D.

    1997-12-31

    The first geothermal application of the Advanced Direct Contact Condenser (ADCC) technology developed by the National Renewable Energy Laboratory (NREL) is now operational and is being tested at The Geysers Power Plant Unit 11. This major research effort is being supported through the combined efforts of NREL, The Department of Energy (DOE), and Pacific Gas and Electric (PG&E). NREL and PG&E have entered into a Cooperative Research And Development Agreement (CRADA) for a project to improve the direct-contact condenser performance at The Geysers Power Plant. This project is the first geothermal adaptation of an advanced condenser design developed for the Ocean Thermal Energy Conversion (OTEC) systems. PG&E expects this technology to improve power plant performance and to help extend the life of the steam field by using steam more efficiently. In accordance with the CRADA, no money is transferred between the contracting parties. In this case the Department of Energy is funding NREL for their efforts in this project and PG&E is contributing funds in kind. Successful application of this technology at The Geysers will provide a basis for NREL to continue to develop this technology for other geothermal and fossil power plant systems.

  20. DIRECT FUEL/CELL/TURBINE POWER PLANT

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2004-05-01

    This report includes the progress in development of Direct FuelCell/Turbine{reg_sign} (DFC/T{reg_sign}) power plants for generation of clean power at very high efficiencies. The DFC/T power system is based on an indirectly heated gas turbine to supplement fuel cell generated power. The DFC/T power generation concept extends the high efficiency of the fuel cell by utilizing the fuel cell's byproduct heat in a Brayton cycle. Features of the DFC/T system include: electrical efficiencies of up to 75% on natural gas, 60% on coal gas, minimal emissions, simplicity in design, direct reforming internal to the fuel cell, reduced carbon dioxide release to the environment, and potential cost competitiveness with existing combined cycle power plants. FCE successfully completed testing of the pre-alpha DFC/T hybrid power plant. This power plant was constructed by integration of a 250kW fuel cell stack and a microturbine. The tests of the cascaded fuel cell concept for achieving high fuel utilizations were completed. The tests demonstrated that the concept results in higher power plant efficiency. Also, the preliminary design of a 40 MW power plant including the key equipment layout and the site plan was completed.

  1. DIRECT FUELCELL/TURBINE POWER PLANT

    SciTech Connect (OSTI)

    Hossein Shezel-Ayagh

    2005-05-01

    This report summarizes the progress made in development of Direct FuelCell/Turbine{reg_sign} (DFC/T{reg_sign}) power plants for generation of clean power at very high efficiencies. The DFC/T power system is based on an indirectly heated gas turbine to supplement fuel cell generated power. The DFC/T power generation concept extends the high efficiency of the fuel cell by utilizing the fuel cell's byproduct heat in a Brayton cycle. Features of the DFC/T system include: electrical efficiencies of up to 75% on natural gas, 60% on coal gas, minimal emissions, simplicity in design, direct reforming internal to the fuel cell, reduced carbon dioxide release to the environment, and potential cost competitiveness with existing combined cycle power plants. Detailed design of the packaged sub-MW alpha DFC/T unit has been completed for mechanical and piping layouts and for structural drawings. Procurement activities continued with delivery of major equipment items. Fabrication of the packaged sub-MW alpha DFC/T unit has been initiated. Details of the process control philosophy were defined and control software programming was initiated.

  2. Peptide partitioning properties from direct insertion studies

    SciTech Connect (OSTI)

    Ulmschneider, Martin [University of Oxford; Smith, Jeremy C [ORNL; Ulmschneider, Jakob [University of Heidelberg

    2010-06-01

    Partitioning properties of polypeptides are at the heart of biological membrane phenomena and their precise quantification is vital for ab-initio structure prediction and the accurate simulation of membrane protein folding and function. Recently the cellular translocon machinery has been employed to determine membrane insertion propensities and transfer energetics for a series of polyleucine segments embedded in a carrier sequence. We show here that the insertion propensity, pathway, and transfer energetics into synthetic POPC bilayers can be fully described by direct atomistic peptide partitioning simulations. The insertion probability as a function of peptide length follows two-state Boltzmann statistics, in agreement with the experiments. The simulations expose a systematic offset between translocon-mediated and direct insertion free energies. Compared to the experiment the insertion threshold is shifted toward shorter peptides by 2 leucine residues. The simulations reveal many hitherto unknown atomic-resolution details about the partitioning process and promise to provide a powerful tool for urgently needed calibration of lipid parameters to match experimentally observed peptide transfer energies.

  3. Direct synthesis of catalyzed hydride compounds

    DOE Patents [OSTI]

    Gross, Karl J.; Majzoub, Eric

    2004-09-21

    A method is disclosed for directly preparing alkali metal aluminum hydrides such as NaAlH.sub.4 and Na.sub.3 AlH.sub.6 from either the alkali metal or its hydride, and aluminum. The hydride thus prepared is doped with a small portion of a transition metal catalyst compound, such as TiCl.sub.3, TiF.sub.3, or a mixture of these materials, in order to render them reversibly hydridable. The process provides for mechanically mixing the dry reagents under an inert atmosphere followed by charging the mixed materials with high pressure hydrogen while heating the mixture to about 125.degree. C. The method is relatively simple and inexpensive and provides reversible hydride compounds which are free of the usual contamination introduced by prior art wet chemical methods.

  4. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Chen, Dong; Giampapa, Mark E.; Heidelberger, Philip; Kumar, Sameer; Parker, Jeffrey J.; Steinmacher-Burow, Burkhard D.; Vranas, Pavlos

    2010-07-27

    Methods, compute nodes, and computer program products are provided for direct memory access (`DMA`) transfer completion notification. Embodiments include determining, by an origin DMA engine on an origin compute node, whether a data descriptor for an application message to be sent to a target compute node is currently in an injection first-in-first-out (`FIFO`) buffer in dependence upon a sequence number previously associated with the data descriptor, the total number of descriptors currently in the injection FIFO buffer, and the current sequence number for the newest data descriptor stored in the injection FIFO buffer; and notifying a processor core on the origin DMA engine that the message has been sent if the data descriptor for the message is not currently in the injection FIFO buffer.

  5. Automatically woven three-directional composite structures

    SciTech Connect (OSTI)

    Bruno, P.S.; Keith, D.O.; Vicario, A.A. Jr.

    1986-07-01

    Three-directional (3-D) fiber reinforced composites were demonstrated with advantages for certain missile and space structures. The applications range from carbon-carbon (c-c) to carbon-epoxy structures. 3-D carbon fiber preforms were woven using automated techniques developed by Aerospatiale of France and then impregnated and processed into c-c or carbon-epoxy structures. Demonstrated structures include c-c ITEs and exit cones for rocket nozzles and carbon-epoxy adapter rings for rocket cases. Other potential applications, including satellite truss joints and meteroid impact shields for space station components, are identified. Advantages of these structures include automated fabrication, improved mechanical properties, and greater reliability. 16 figures, 1 table.

  6. First direct observation of muon antineutrino disappearance

    DOE PAGES-Beta [OSTI]

    Adamson, P.

    2011-07-05

    This letter reports the first direct observation of muon antineutrino disappearance. The MINOS experiment has taken data with an accelerator beam optimized for ν¯μ production, accumulating an exposure of 1.71 x 1020 protons on target. In the Far Detector, 97 charged current ν¯μ events are observed. The no-oscillation hypothesis predicts 156 events and is excluded at 6.3σ. The best fit to oscillation yields |Δm¯2| = (3.36-0.40 +0.46(stat.) ± 0.06(syst.)) x 10-3 eV2, sin2(2 θ¯) = 0.86-0.12+0.11 (stat.) ± 0.01(syst.). The MINOS νμ and ν¯μ measurements are consistent at the 2.0% confidence level, assuming identical underlying oscillation parameters.

  7. Direct memory access transfer completion notification

    DOE Patents [OSTI]

    Archer, Charles J.; Blocksome, Michael A.; Parker, Jeffrey J.

    2010-08-17

    Methods, apparatus, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA engine on an origin compute node in an injection FIFO buffer, a data descriptor for an application message to be transferred to a target compute node on behalf of an application on the origin compute node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying an address of a completion notification field in application storage for the application; transferring, by the origin DMA engine to the target compute node, the message in dependence upon the data descriptor; and notifying, by the origin DMA engine, the application that the transfer of the message is complete, including performing a local direct put operation to store predesignated notification data at the address of the completion notification field.

  8. DIRECT FUEL CELL/TURBINE POWER PLANT

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2003-05-22

    Project activities were focused on the design and construction the sub-scale hybrid Direct Fuel Cell/turbine (DFC/T{reg_sign}) power plant and modification of a Capstone Simple Cycle Model 330 microturbine. The power plant design work included preparation of system flow sheet and performing computer simulations based on conservation of mass and energy. The results of the simulation analyses were utilized to prepare data sheets and specifications for balance-of-plant equipment. Process flow diagram (PFD) and piping and instrumentation diagrams (P&ID) were also completed. The steady state simulation results were used to develop design information for modifying the control functions, and for sizing the heat exchangers required for recuperating the waste heat from the power plant. Line and valve sizes for the interconnecting pipes between the microturbine and the heat recuperators were also identified.

  9. DIRECT FUEL CELL/TURBINE POWER PLANT

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2003-05-23

    In this reporting period, a milestone was achieved by commencement of testing and operation of the sub-scale hybrid direct fuel cell/turbine (DFC/T{reg_sign}) power plant. The operation was initiated subsequent to the completion of the construction of the balance-of-plant (BOP) and implementation of process and control tests of the BOP for the subscale DFC/T hybrid system. The construction efforts consisted of finishing the power plant insulation and completion of the plant instrumentation including the wiring and tubing required for process measurement and control. The preparation work also included the development of procedures for facility shake down, conditioning and load testing of the fuel cell, integration of the microturbine, and fuel cell/gas turbine load tests. At conclusion of the construction, the process and control (PAC) tests of BOP, including the microturbine, were initiated.

  10. Direct Production of Silicones From Sand

    SciTech Connect (OSTI)

    Larry N. Lewis; F.J. Schattenmann: J.P. Lemmon

    2001-09-30

    Silicon, in the form of silica and silicates, is the second most abundant element in the earth's crust. However the synthesis of silicones (scheme 1) and almost all organosilicon chemistry is only accessible through elemental silicon. Silicon dioxide (sand or quartz) is converted to chemical-grade elemental silicon in an energy intensive reduction process, a result of the exceptional thermodynamic stability of silica. Then, the silicon is reacted with methyl chloride to give a mixture of methylchlorosilanes catalyzed by cooper containing a variety of tract metals such as tin, zinc etc. The so-called direct process was first discovered at GE in 1940. The methylchlorosilanes are distilled to purify and separate the major reaction components, the most important of which is dimethyldichlorosilane. Polymerization of dimethyldichlorosilane by controlled hydrolysis results in the formation of silicone polymers. Worldwide, the silicones industry produces about 1.3 billion pounds of the basic silicon polymer, polydimethylsiloxane.

  11. California schemin': how about direct rebates?

    SciTech Connect (OSTI)

    2010-03-15

    California is pushing ahead with its own climate bill to reduce statewide emissions to 1990 levels by 2020. Some 75--80 percent of the measures required to meet the 2020 reductions in greenhouse gas (GHG) emissions will be met through the 33 percent renewable portfolio standard (RPS), stringent energy efficiency initiatives, and a long list of other mandatory requirements affecting the transport sector. The balance will be met through market- and pricing-oriented mechanisms, including auctioning of GHG emission permits. In early January, an advisory committee proposed that roughly 75 percent of the collected proceeds should be distributed directly to households with the balance used to assist badly affected industries, especially those with few options to transition to a lower carbon regime.

  12. Direct use of methane in coal liquefaction

    DOE Patents [OSTI]

    Sundaram, M.S.; Steinberg, M.

    1985-06-19

    This invention relates to a process for converting solid carbonaceous material, such as coal, to liquid and gaseous hydrocarbons utilizing methane, generally at a residence time of about 20 to 120 minutes at a temperature of 250 to 750/sup 0/C, preferably 350 to 450/sup 0/C, pressurized up to 6000 psi, and preferably in the 1000 to 2500 psi range, preferably directly utilizing methane 50 to 100% by volume in a mix of methane and hydrogen. A hydrogen donor solvent or liquid vehicle such as tetralin, tetrahydroquinoline, piperidine, and pyrolidine may be used in a slurry mix where the solvent feed is 0 to 100% by weight of the coal or carbonaceous feed. Carbonaceous feed material can either be natural, such as coal, wood, oil shale, petroleum, tar sands, etc., or man-made residual oils, tars, and heavy hydrocarbon residues from other processing systems. 1 fig.

  13. 1999 LDRD Laboratory Directed Research and Development

    SciTech Connect (OSTI)

    Rita Spencer; Kyle Wheeler

    2000-06-01

    This is the FY 1999 Progress Report for the Laboratory Directed Research and Development (LDRD) Program at Los Alamos National Laboratory. It gives an overview of the LDRD Program, summarizes work done on individual research projects, relates the projects to major Laboratory program sponsors, and provides an index to the principal investigators. Project summaries are grouped by their LDRD component: Competency Development, Program Development, and Individual Projects. Within each component, they are further grouped into nine technical categories: (1) materials science, (2) chemistry, (3) mathematics and computational science, (4) atomic, molecular, optical, and plasma physics, fluids, and particle beams, (5) engineering science, (6) instrumentation and diagnostics, (7) geoscience, space science, and astrophysics, (8) nuclear and particle physics, and (9) bioscience.

  14. State Program Advisory Number 8. Directive (Final)

    SciTech Connect (OSTI)

    Not Available

    1991-03-01

    The directive discusses State and Regional Programs Branch, which has periodically issued State Programs Advisories (SPAs) to update the 'State Consolidated Authorization Manual' (SCRAM) as new RCRA program policies, regulations, and self-implementing statutory provisions come into effect. Since the SCRAM was recently replaced by the State Authorization Manual (SAM) which includes RCRA program changes through 6/30/89, current SPAs (SPA 8 and higher) will now update the SAM. SPA 8, covers RCRA program changes for the period 7/1/89 - 12/31/89. Included are 7 new revision checklists, model Attorney General's Statement language for the changes covered by the SPA, and other revised materials. A revision to the First Third Scheduled Wastes is included here. SPA 8 introduces Revision Checklist 70 which covers changes to Part 124 which were inadvertently not included as checklists in previous guidance.

  15. Direct write with microelectronic circuit fabrication

    DOE Patents [OSTI]

    Drummond, Timothy; Ginley, David

    1992-01-01

    In a process for deposition of material onto a substrate, for example, the deposition of metals or dielectrics onto a semiconductor laser, the material is deposited by providing a colloidal suspension of the material and directly writing the suspension onto the substrate surface by ink jet printing techniques. This procedure minimizes the handling requirements of the substrate during the deposition process and also minimizes the exchange of energy between the material to be deposited and the substrate at the interface. The deposited material is then resolved into a desired pattern, preferably by subjecting the deposit to a laser annealing step. The laser annealing step provides high resolution of the resultant pattern while minimizing the overall thermal load of the substrate and permitting precise control of interface chemistry and interdiffusion between the substrate and the deposit.

  16. Direct write with microelectronic circuit fabrication

    DOE Patents [OSTI]

    Drummond, T.; Ginley, D.

    1988-05-31

    In a process for deposition of material onto a substrate, for example, the deposition of metals for dielectrics onto a semiconductor laser, the material is deposited by providing a colloidal suspension of the material and directly writing the suspension onto the substrate surface by ink jet printing techniques. This procedure minimizes the handling requirements of the substrate during the deposition process and also minimizes the exchange of energy between the material to be deposited and the substrate at the interface. The deposited material is then resolved into a desired pattern, preferably by subjecting the deposit to a laser annealing step. The laser annealing step provides high resolution of the resultant pattern while minimizing the overall thermal load of the substrate and permitting precise control of interface chemistry and interdiffusion between the substrate and the deposit. 3 figs.

  17. A Direct Search for Dirac Magnetic Monopoles

    SciTech Connect (OSTI)

    Mulhearn, Michael James

    2004-10-01

    Magnetic monopoles are highly ionizing and curve in the direction of the magnetic field. A new dedicated magnetic monopole trigger at CDF, which requires large light pulses in the scintillators of the time-of-flight system, remains highly efficient to monopoles while consuming a tiny fraction of the available trigger bandwidth. A specialized offline reconstruction checks the central drift chamber for large dE/dx tracks which do not curve in the plane perpendicular to the magnetic field. We observed zero monopole candidate events in 35.7 pb{sup -1} of proton-antiproton collisions at {radical}s = 1.96 TeV. This implies a monopole production cross section limit {sigma} < 0.2 pb for monopoles with mass between 100 and 700 GeV, and, for a Drell-Yan like pair production mechanism, a mass limit m > 360 GeV.

  18. Direct use of methane in coal liquefaction

    DOE Patents [OSTI]

    Sundaram, Muthu S.; Steinberg, Meyer

    1987-01-01

    This invention relates to a process for converting solid carbonaceous material, such as coal, to liquid and gaseous hydrocarbons utilizing methane, generally at a residence time of about 20-120 minutes at a temperature of 250.degree.-750.degree. C., preferably 350.degree.-450.degree. C., pressurized up to 6000 psi, and preferably in the 1000-2500 psi range, preferably directly utilizing methane 50-100% by volume in a mix of methane and hydrogen. A hydrogen donor solvent or liquid vehicle such as tetralin, tetrahydroquinoline, piperidine, and pyrolidine may be used in a slurry mix where the solvent feed is 0-100% by weight of the coal or carbonaceous feed. Carbonaceous feed material can either be natural, such as coal, wood, oil shale, petroleum, tar sands, etc., or man-made residual oils, tars, and heavy hydrocarbon residues from other processing systems.

  19. Direct-to-digital holography and holovision

    DOE Patents [OSTI]

    Thomas, Clarence E.; Baylor, Larry R.; Hanson, Gregory R.; Rasmussen, David A.; Voelkl, Edgar; Castracane, James; Simkulet, Michelle; Clow, Lawrence

    2000-01-01

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  20. Direct FuelCell/Turbine Power Plant

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2004-11-19

    This report includes the progress in development of Direct Fuel Cell/Turbine. (DFC/T.) power plants for generation of clean power at very high efficiencies. The DFC/T power system is based on an indirectly heated gas turbine to supplement fuel cell generated power. The DFC/T power generation concept extends the high efficiency of the fuel cell by utilizing the fuel cell's byproduct heat in a Brayton cycle. Features of the DFC/T system include: electrical efficiencies of up to 75% on natural gas, 60% on coal gas, minimal emissions, simplicity in design, direct reforming internal to the fuel cell, reduced carbon dioxide release to the environment, and potential cost competitiveness with existing combined cycle power plants. FCE successfully completed testing of the pre-alpha sub-MW DFC/T power plant. This power plant was constructed by integration of a 250kW fuel cell stack and a microturbine. Following these proof-of-concept tests, a stand-alone test of the microturbine verified the turbine power output expectations at an elevated (representative of the packaged unit condition) turbine inlet temperature. Preliminary design of the packaged sub-MW alpha DFC/T unit has been completed and procurement activity has been initiated. The preliminary design of a 40 MW power plant including the key equipment layout and the site plan was completed. A preliminary cost estimate for the 40 MW DFC/T plant has also been prepared. The tests of the cascaded fuel cell concept for achieving high fuel utilizations were completed. The tests demonstrated that the concept results in higher power plant efficiency. Alternate stack flow geometries for increased power output/fuel utilization capabilities are also being evaluated.

  1. Direct numerical simulation of turbulent reacting flows

    SciTech Connect (OSTI)

    Chen, J.H.

    1993-12-01

    The development of turbulent combustion models that reflect some of the most important characteristics of turbulent reacting flows requires knowledge about the behavior of key quantities in well defined combustion regimes. In turbulent flames, the coupling between the turbulence and the chemistry is so strong in certain regimes that is is very difficult to isolate the role played by one individual phenomenon. Direct numerical simulation (DNS) is an extremely useful tool to study in detail the turbulence-chemistry interactions in certain well defined regimes. Globally, non-premixed flames are controlled by two limiting cases: the fast chemistry limit, where the turbulent fluctuations. In between these two limits, finite-rate chemical effects are important and the turbulence interacts strongly with the chemical processes. This regime is important because industrial burners operate in regimes in which, locally the flame undergoes extinction, or is at least in some nonequilibrium condition. Furthermore, these nonequilibrium conditions strongly influence the production of pollutants. To quantify the finite-rate chemistry effect, direct numerical simulations are performed to study the interaction between an initially laminar non-premixed flame and a three-dimensional field of homogeneous isotropic decaying turbulence. Emphasis is placed on the dynamics of extinction and on transient effects on the fine scale mixing process. Differential molecular diffusion among species is also examined with this approach, both for nonreacting and reacting situations. To address the problem of large-scale mixing and to examine the effects of mean shear, efforts are underway to perform large eddy simulations of round three-dimensional jets.

  2. Pneumatic direct cylinder fuel injection system

    SciTech Connect (OSTI)

    Reinke, P.E.

    1988-09-20

    This patent describes a pneumatic direct cylinder fuel injection system for use in an internal combustion engine of the type having an engine block means with an air induction means for supplying induction air to cylinders in the engine block means, with each cylinder having a piston reciprocable therein so as to define a combustion chamber which includes a stratified charge chamber as a portion thereof, the system including a plurality of pneumatic injectors, with the pneumatic injector being supported by the engine block means in position to discharge an air/fuel mixture into an associate stratified charge chamber, each of the pneumatic injectors including a body means terminating at one end thereof in a nozzle body, a bore means through the body means and the nozzle body, a valve seat encircling the bore means at the outboard free end of the nozzle body, the opposite end of the bore means being connectable to a source of air at a predetermined pressure, a poppet valve operatively positioned in the bore means. The poppet value includes a head movable between an open position and closed position relative to the valve seat and a stem extending from the head and defining with the bore means an air passage, control means operatively associated with the poppet valve to normally maintain the poppet valve in the closed position and being operative to permit movement of the poppet valve to the open position and, an electromagnetic fuel injector operatively positioned in the body means for injecting pressurized fuel into the air passage upstream of the head of the poppet valve in terms of the direction of air flow through the air passage during a compression stroke of the piston in the associate cylinder, the arrangement being such that when the compression pressure reaches a predetermined pressure the poppet valve will be moved to the valve closed position.

  3. EA-280-B Direct Energy Marketing Inc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    -B Direct Energy Marketing Inc EA-280-B Direct Energy Marketing Inc Order authorizing Direct Energy Marketing Inc to export electric energy to Canada. EA-280-B Direct Energy Marketing Inc (3.51 MB) More Documents & Publications EA-280

  4. Laboratory Directed Research and Development Program FY 2007

    SciTech Connect (OSTI)

    Hansen, Todd C; editor, Todd C Hansen,

    2008-03-12

    Report on Ernest Orlando Lawrence Berkeley National Laboratory Laboratory Directed Research and Development Program FY 2007

  5. Legislative Directive: EISA 2007, Subtitle B: Lighting Energy Efficiency

    Energy.gov [DOE]

    Legislative Directive: EISA 2007, Subtitle B: Lighting Energy Efficiency, Sec. 321: Lighting Energy Efficiency

  6. Directions to External Dosimetry Office | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Directions to External Dosimetry Office PDF icon Route to Bldg 202 for dosimeters

  7. Medium-Power Lead-Alloy Fast Reactor Balance-of-Plant Options

    SciTech Connect (OSTI)

    Dostal, Vaclav [Massachusetts Institute of Technology (United States); Hejzlar, Pavel [Massachusetts Institute of Technology (United States); Todreas, Neil E. [Massachusetts Institute of Technology (United States); Buongiorno, Jacopo [Idaho National Engineering and Environmental Laboratory (United States)

    2004-09-15

    Proper selection of the power conversion cycle is a very important step in the design of a nuclear reactor. Due to the higher core outlet temperature ({approx}550 deg. C) compared to that of light water reactors ({approx}300 deg. C), a wide portfolio of power cycles is available for the lead alloy fast reactor (LFR). Comparison of the following cycles for the LFR was performed: superheated steam (direct and indirect), supercritical steam, helium Brayton, and supercritical CO{sub 2} (S-CO{sub 2}) recompression. Heat transfer from primary to secondary coolant was first analyzed and then the steam generators or heat exchangers were designed. The direct generation of steam in the lead alloy coolant was also evaluated. The resulting temperatures of the secondary fluids are in the range of 530-545 deg. C, dictated by the fixed space available for the heat exchangers in the reactor vessel. For the direct steam generation situation, the temperature is 312 deg. C. Optimization of each power cycle was carried out, yielding net plant efficiency of around 40% for the superheated steam cycle while the supercritical steam and S-CO{sub 2} cycles achieved net plant efficiency of 41%. The cycles were then compared based on their net plant efficiency and potential for low capital cost. The superheated steam cycle is a very good candidate cycle given its reasonably high net plant efficiency and ease of implementation based on the extensive knowledge and operating experience with this cycle. Although the supercritical steam cycle net plant efficiency is slightly better than that of the superheated steam cycle, its high complexity and high pressure result in higher capital cost, negatively affecting plant economics. The helium Brayton cycle achieves low net plant efficiency due to the low lead alloy core outlet temperature, and therefore, even though it is a simpler cycle than the steam cycles, its performance is mediocre in this application. The prime candidate, however, appears to be

  8. POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Positions (Expired) | Department of Energy 9A Direct Hire Authority for Acquisition Positions (Expired) POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition Positions (Expired) THIS GUIDANCE HAS EXPIRED This Policy on Direct Hire Authority for Acquisition Positions has been replaced by POLICY GUIDANCE MEMORANDUM #34B Direct Hire Authority for Contract Specialist Positions POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition Positions (Expired) (49.21 KB)

  9. Technical Standards,DOE Standards and Corresponding Directives Crosswalk -

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    February 2, 2002 | Department of Energy DOE Standards and Corresponding Directives Crosswalk - February 2, 2002 Technical Standards,DOE Standards and Corresponding Directives Crosswalk - February 2, 2002 February 2, 2002 DOE Standards and Corresponding Directives Crosswalk DOE Standards and Corresponding Directives Crosswalk table Technical Standards,DOE Standards and Corresponding Directives Crosswalk (72.08 KB) More Documents & Publications Technical Standards, DOE Orders and

  10. Direct FuelCell/Turbine Power Plant

    SciTech Connect (OSTI)

    Hossein Ghezel-Ayagh

    2008-09-30

    This report summarizes the progress made in development of Direct FuelCell/Turbine (DFC/T{reg_sign}) power plants for generation of clean power at very high efficiencies. The DFC/T system employs an indirectly heated Turbine Generator to supplement fuel cell generated power. The concept extends the high efficiency of the fuel cell by utilizing the fuel cell's byproduct heat in a Brayton cycle. Features of the DFC/T system include: electrical efficiencies of up to 75% on natural gas, minimal emissions, reduced carbon dioxide release to the environment, simplicity in design, direct reforming internal to the fuel cell, and potential cost competitiveness with existing combined cycle power plants. Proof-of-concept tests using a sub-MW-class DFC/T power plant at FuelCell Energy's (FCE) Danbury facility were conducted to validate the feasibility of the concept and to measure its potential for electric power production. A 400 kW-class power plant test facility was designed and retrofitted to conduct the tests. The initial series of tests involved integration of a full-size (250 kW) Direct FuelCell stack with a 30 kW Capstone microturbine. The operational aspects of the hybrid system in relation to the integration of the microturbine with the fuel cell, process flow and thermal balances, and control strategies for power cycling of the system, were investigated. A subsequent series of tests included operation of the sub-MW Direct FuelCell/Turbine power plant with a Capstone C60 microturbine. The C60 microturbine extended the range of operation of the hybrid power plant to higher current densities (higher power) than achieved in initial tests using the 30kW microturbine. The proof-of-concept test results confirmed the stability and controllability of operating a fullsize (250 kW) fuel cell stack in combination with a microturbine. Thermal management of the system was confirmed and power plant operation, using the microturbine as the only source of fresh air supply to the

  11. ARM - Datastreams - kazrspeccmaskgecopol

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    port up deg roll ( time ) Signal-to-noise ratio dB signaltonoiseratio ( time, range ) Radar Doppler Spectra 10 lg(re 1 mW) spectra ( numspectra, speclength ) Radar Doppler...

  12. SELF-MODERATING FERTILE COMPOUNDS

    DOE Patents [OSTI]

    Peterson, D.T.; Rexer, J.

    1962-07-17

    Thorium carbide-x-(thorium hydride), where x is an integer from 1 to 2, are prepared by reacting thorium monocarbide and thorium at 500 to 950 deg C in a hydrogen atmosphere. (AEC)

  13. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... The materials were sintered in the range 1520-1580 deg. C. The structure of the system was analyzed by X-ray diffraction and Raman spectroscopic methods. The cell parameters of ...

  14. METHOD OF PREPARING UF$sub 6$

    DOE Patents [OSTI]

    Davidson, R.; Fried, S.

    1959-10-27

    A method is described of preparing uraniurn hexafluoride without the use of fluorine gas by reacting uraniurn tetrafluoride with oxygen gas under rigorously anhydrous conditions at 600 to 1300 deg K within a pre-fluorinated nickel vessel.

  15. A New Route to Nanoscale Conducting Channels in Insulating Oxides

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    interacting, electrons could hold the key to engineering novel functionality into a new generation of all-oxide electronic devices. ARPES measurements of a 2DEG in SrTiO3 and...

  16. B

    Office of Legacy Management (LM)

    ... At the south and of tte building xear clarp openwIndow, aIllalcm rle4 tri- chlolpthylerne deg;reasor has born in.d&ladr Aab.cgrouIforevaluntlngthe hazard oftrichlolmthy0lm I ...

  17. DIFFERENTIAL SPECTRUM OF NEUTRONS AT CHACALTAYA-BOLIVIA

    SciTech Connect (OSTI)

    Mayta, R.; Zanini, A.; Ticona, R.; Velarde, A.

    2009-04-30

    We describe the Neutron Spectrometer Experiment installed at Chacaltaya Cosmic Rays Observatory (68 deg. O, 16.2 deg. S), located in Bolivia, at 5230 m.a.s.l. This experimental system is constituted by passive detectors which register the flux of neutrons, in an energy range of 10 KeV-20 MeV. Using the unfolding code BUNTO a peak around 1 MeV of the characteristic spectrum of neutrons was obtained. Experimental values, observed during April of 2008, are compared with similar ones carried out in 1997 at the same place, in order to look for eventual changes due to local atmosphere. A similar experiment was also carried up at the Laboratory of Testa Grigia-Italy (45.56 deg. N, 7.42 deg. E,. 3480 m.a.l.s). Data of both stations allow us to compare the spectra in order to explain the difference of neutron flux of these two stations.

  18. Ultra-short channel GaN high electron mobility transistor-like...

    Office of Scientific and Technical Information (OSTI)

    based on the velocity-field dependence of two-dimensional electron gas (2-DEG) channel accounting for the ballistic electron acceleration and the inter-valley transfer. In...

  19. Section 45

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Campaign Location (deg) vapor (cm) deviation Latitude Mean Std. TOGA- Kavieng, Papua COARE New Guinea 2.6 N 5.227 0.429 (a) CSP 15 S to (b) RV Discoverer (Tropical Western Pacific ...

  20. Study of magnetic activity effects on the thermospheric winds in the low ionosphere. Master`s thesis

    SciTech Connect (OSTI)

    Davila, R.C.

    1994-09-01

    The purpose of this thesis is to examine the effects of magnetic activity on the low latitude F-region thermospheric winds. The F-region (120-1600 km) is a partially ionized medium where O+ and O are the major ion and neutral species, respectively. The thermospheric winds at these altitudes are driven primarily by pressure gradient forces resulting from the solar heating during the day and cooling at night. For this study, the author used measured Fabry-Perot Interferometer (FPI) winds at Arequipa (16.5 deg S, 71.5 deg W) and measured FPI and incoherent Scatter Radar (ISR) winds at Arecibo (18.6 deg N, 66.8 deg W).