National Library of Energy BETA

Sample records for determination form proposed

  1. Categorical Exclusion Determination Form Proposed Action Title...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposed Action Title: (0473-1597) Smart Wire Grid, Inc. - Distributed Power Flow Contro l Using Smart Wires for Energy Routing Program or Field Office: Advanced Research Projects ...

  2. Categorical Exclusion Determination Form Proposed Action Title: (0674-1610) TVN Systems, Inc. -

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Categorical Exclusion Determination Form Proposed Action Title: (0674-1610) TVN Systems, Inc. - Hydrogen/Bromine Electrical Energy Storage System Program or Field Office :Advanced Research Projects Agency - Energy (ARPA-E) Submit by E-mail LocationCs) CCity/County/State): TVN Systems, Inc. (Lawrence, KS); Vanderbilt University (Nashville, TN); University of Kansas (Lawrence, KS) Proposed Action Description: Funding will support efforts to develop a cost-effective

  3. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    (Photovoltaic) Survey Forms November 19, 2015 In early 2016 the U.S. Energy Information ... Details will be provided closer to that date. Proposed changes as of December 2015 Forms ...

  4. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    Quarterly Electricity Imports and Exports Report (EIA-111) OMB Clearance Renewal in 2015 ... Report (EIA-111) survey on August 26, 2015. The initial proposals were announced to ...

  5. 2013 Electricity Form Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Form EIA-861, "Annual Electric Power Industry Report" The EIA-861 survey has historically collected retail sales, revenue, and a variety of information related to demand response ...

  6. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    LA NEPA COMPLIANCE DETERMINATION FORM PRID - 09P-0059 V2 Page 1 of 8 Project/Activity Title: TA-3 Substation Replacement Project PRID: 09P-0059 V2 Date: February 16, 2016 Purpose: The proposed demolition and replacement of the Los Alamos National Laboratory's (LANL) Technical Area (TA)-3 electrical power substation is needed to provide reliable and efficient electrical distribution systems with sufficient electrical capacity to support the national security missions. The electrical distribution

  7. CONFIGURATION CHANGE PROPOSAL FORM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CONFIGURATION CHANGE PROPOSAL FORM CONFIGURATION CHANGE PROPOSAL FORM This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. This form is used for sharing information on Domain Name Server (DNS) changes, new requirements, modifications or enhancements within the DOE Headquarters Programmatic and Office Management Areas. (40.5 KB) More Documents &

  8. Microsoft Word - Microfabrication Project Proposal Form-April16...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Project Proposal Form Principle Investigator: (Person responsible for project) Name: E-Mail Address: ...

  9. Microsoft Word - ProjectProposalForm.dotx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    If yes, who? Please attach a list of collaborators and students, if any, from whom we can expect exposure request forms for this...

  10. DOE Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Recovery and Reinvestment Act: Proposed Action or Project Description The Rosebud Sioux ... The proposed tasks include (1) preliminary project assessments-economic, environmental, ...

  11. Categorical Exclusion Determination Form Proposed Action Title...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Indoor laboratory-based R&D will be performed in dedicated laboratory facilities at Rensselear Polytechnic Institute (Troy, NY) and Virginia Tech (Blacksburg, VA). Custom ...

  12. Categorical Exclusion (CX) Determination Form | Department of...

    Energy Savers

    It also features an electronic means to submit categorical exclusion determinations for web posting. CXD-Form-2011Ver2.pdf (971.24 KB) More Documents & Publications CX-008030: ...

  13. U.S. Department of Energy Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Categorical Exclusion Determination Form Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation) The proposal fits within a class of actions

  14. Air-Con International: Noncompliance Determination and Proposed...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301) ...

  15. 2014-02-21 Issuance: Proposed Determination of Computer Servers...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Issuance: Proposed Determination of Computer Servers as a Covered Consumer Product; ... previously proposed determination that computer servers qualify as a covered product, as ...

  16. A Proposed Methodology to Determine the Leverage Impacts of Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment Programs 2008 A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment ...

  17. DOE Publishes Supplemental Proposed Determination for Miscellaneous Residential Refrigeration Products

    Energy.gov [DOE]

    The Department of Energy has published a supplemental proposed determination regarding miscellaneous residential refrigeration products.

  18. National Nuclear Security Administration Categorical Exclusion Determination Form

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Categorical Exclusion Determination Form NEPA ID#: Proposed Action Title: Program or Field Office: Location(s) (City/County/State): Proposed Action Description: Categorical Exclusion(s) Applied: For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in

  19. Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Access Procedures for New Users Deposition Request Form Exit Form Flycutting Request Form Hot Embossing Request Form Metrology Request Form Microfabrication Project Proposal Form...

  20. FAA Form 7460-1: Notice of Proposed Construction or Alteration...

    Open Energy Information (Open El) [EERE & EIA]

    FAA Form 7460-1: Notice of Proposed Construction or Alteration Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: FAA Form 7460-1: Notice of Proposed...

  1. Proposed research and development plan for mixed low-level waste forms

    SciTech Connect (OSTI)

    O`Holleran, T.O.; Feng, X.; Kalb, P.

    1996-12-01

    The objective of this report is to recommend a waste form program plan that addresses waste form issues for mixed low-level waste (MLLW). The report compares the suitability of proposed waste forms for immobilizing MLLW in preparation for permanent near-surface disposal and relates them to their impact on the U.S. Department of Energy`s mixed waste mission. Waste forms are classified into four categories: high-temperature waste forms, hydraulic cements, encapsulants, and specialty waste forms. Waste forms are evaluated concerning their ability to immobilize MLLW under certain test conditions established by regulatory agencies and research institutions. The tests focused mainly on leach rate and compressive strength. Results indicate that all of the waste forms considered can be tailored to give satisfactory performance immobilizing large fractions of the Department`s MLLW inventory. Final waste form selection will ultimately be determined by the interaction of other, often nontechnical factors, such as economics and politics. As a result of this report, three top-level programmatic needs have been identified: (1) a basic set of requirements for waste package performance and disposal; (2) standardized tests for determining waste form performance and suitability for disposal; and (3) engineering experience operating production-scale treatment and disposal systems for MLLW.

  2. DOE Issues Proposed Coverage Determination for Hearth Products

    Energy.gov [DOE]

    The Department of Energy has issued a pre-publication Federal Register notice of proposed determination regarding energy conservation standards for hearth products.

  3. Southwestern Power Administration Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Associated Electric Cooperative, Inc. Substation Improvements Program or Field Office: Southwestern Power Administration Location{s) (City/County/State): Springfield, Missouri, Greene County Proposed Action Description: Associated Electric Cooperative, Inc. proposes to install new underground conduit and cable in Southwestern Power Administrations' Springfield, Missouri electrical substation. Categorical ExciusionCs) Al'l'lied: 10 CFR 1021, Appendix B to Subpart D, Part B4.6- Additions and

  4. Southwestern Power Administration Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Erosion Control Project along Transmission Line 3016, Structure 31 Program or Field Office: Southwestern Power Administration Location(s) (City/County/State): Muskogee County, Oklahoma Proposed Action Description: Southwestern Power Administration (Southwestern) proposes to initiate a project to prevent water erosion around transmission line 3016, structure number 31 located in Muskogee County, Oklahoma. The structure foundation is being eroded by water runoff and streambed washout activities

  5. Southwestern Power Administration Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Line Relocation Project for Farrell Cooper Mining Company Program or Field Office: Southwestern Power Administration Location(s) (City/County/State): Stigler, Haskell County, Oklahoma Proposed Action Description: Farrell Cooper Mining Company (FCMC) proposes to require the relocation of a portion of Southwestern Power Administration's transmission line number 3016 to accommodate FCMCs coal mining activity in the area. Categorical Exclusion(s) Applied: 10 CFR 1021 , Appendix B to Subpart D, Part

  6. CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION:

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    'IU "~I :~~~r;::::N CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION: Southwestern Power Administration proposes to perform aerial saw tree trimming activities along select portions of transmission line rights-of-ways located in eastern Oklahoma during the early winter of 2011. PROPOSED BY: Southwestern Power Administration- U.S. Dept. of Energy DATE: December 10, 2010 NUMBERS AND TITLES OF THE CATEGORICAL EXCLUSIONS BEING APPLIED: 10 CFR 1021, Appendix B to

  7. CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION:

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    'u ", lt~Fs::::N CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION: Southwestern Power Administration proposes to construct a maintenance garage for heavy vehicles and equipment at the Springfield, Missouri facility. PROPOSED BY: Southwestern Power Administration- U.S. Dept. of Energy DATE: December 7,2010 NUMBERS AND TITLES OF THE CATEGORICAL EXCLUSIONS BEING APPLIED: 10 CFR 1021, Appendix B to Subpart D, Part B1.15- Siting, construction or modification of

  8. CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION:

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION: Southwestern Power Administration (Southwestern) proposes to obtain an easement for an existing access road which is located in Carroll County, Arkansas. The easement will serve to facilitate Southwestern's electrical utility vehicles accessing electrical transmission line 3008, near structure 33, in Carroll County, Arkansas. PROPOSED BY: Southwestern Power Administration- U.S. Dept. of Energy DATE: January 28,2011

  9. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Final Determination of Coverage for Compressors (1904-AC83) EERE- Buildings Technology Program Nationwide Under this Determination DOE is finding that compressors qualify as a covered product under Part A of Title III of the Energy Policy and Conservation Act (EPCA), as amended, and thus would be appropriate for energy conservation standards. This determination does not propose test procedures or energy conservation standards for compressors. This determination is procedural. A6 - Procedural

  10. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Final Rulemaking Regarding Energy Conservation Standards for Packaged Terminal Air Conditioners (RIN # 1904- AC82) EERE- Buildings Technology Program Nationwide In this final rule, DOE proposes new and amended energy conservation standards for Packaged Terminal Air Conditioners. DOE has determined that the amended energy conservation standards for these products would result in significant conservation of energy, and are technologically feasible and economically justified. These proposed

  11. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Direct Final Rulemaking for Energy Conservation Standards for Dedicated-Purpose Pool Pumps (RIN: 1904-AD52) EERE- Buildings Technology Program Nationwide In this direct final rule DOE proposes to adopt amended energy conservation standards with respect to dedicated-purpose pool pumps. DOE has determined that the amended energy conservation standards for these products would result in significant conservation of energy, and are technologically feasible and economically justified. These proposed

  12. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Notice of Final Rule Rulemaking for Energy Conservation Standards for Commercial Packaged Boilers (RIN 1904- AD01) EERE- Buildings Technology Program Nationwide In this final rule DOE proposes to adopt amended energy conservation standards with respect to commercial packaged boilers. DOE has determined that the amended energy conservation standards for these products would result in significant conservation of energy, and are technologically feasible and economically justified. These proposed

  13. 2014-02-21 Issuance: Proposed Determination of Computer and Battery...

    Energy.gov (indexed) [DOE]

    Proposed Determination of Computer and Battery Backup Systems as a Covered Consumer ... Proposed Determination of Computer and Battery Backup Systems as a Covered Consumer ...

  14. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed Coverage Determination (Energy Conservation Standard) for Set-Top Boxes

    Energy.gov [DOE]

    The Department of Energy (DOE) has issued pre-publication Federal Register notices withdrawing the notice of proposed rulemaking for a test procedure for set-top boxes and the proposed coverage determination for set-top boxes and network equipment.

  15. U.S. Department of Energy NEPA Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U.S. Department of Energy Categorical Exclusion Determination Form Program or Field Office: Energy Efficiency and Conservation Block Grant Program Project Title MI-City-Westland City Location: City Westland City MI American Recovery and Reinvestment Act: Proposed Action or Project Description: 1) Development of an energy efficiency and conservation strategy (ongoing), 2) technical consultant services, 3) retrofit the HVAC and refrigeration systems at the Mike Modano Ice Arena with more energy

  16. Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals Sign In About | Careers | Contact | Investors | bpa.gov Search Doing Business Expand Doing Business Customer Involvement Expand Customer Involvement Reports & Tools...

  17. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposed Rulemaking for Energy Conservation Standards for Certain Industrial Equipment (RIN: 1904-AD23) EERE- Buildings Technology Program Nationwide In this Proposed Rulemaking, DOE proposes to adopt energy conservation standards specified by ASHRAE Standard 90.1-2013 including standards for three classes of small phase commercial air cooled air conditioners and heat pumps less than 65,000 Btu/h, three classes of water source heat pumps, and one class of commercial oil fired storage water

  18. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Miscellaneous Refrigeration Products (RIN 1904-AC51) EERE- Buildings Technology Program Nationwide In this Direct Final Rulemaking, DOE proposes amended energy conservation standards for Miscellaneous Refrigeration Products. The proposed standards, are shown in Table I.1 of the Final Rule. These proposed standards, if adopted, would apply to all products listed in Table I.1 and manufactured in, or imported into, the United States on or after 3 years after date of publication of the Direct Final

  19. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Notice of Proposed Definition and Data Availability and Request for Comment Regarding General Service Lamps (1904- AD09) EERE- Buildings Technology Program Nationwide On March 17, 2016 the U.S. Department of Energy (DOE) issued a notice of proposed rulemaking (NOPR) proposing energy conservation standards for General Service Lamps. Subsequent to the NOPR DOE held a public meeting and accepted written comments regarding the NOPR. In response to some of those comments, DOE conducted additional

  20. Proposed

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposed Settlement for Hanford Cleanup U.S. Department of Energy ● Washington State Department of Ecology * U.S. Environmental Protection Agency What's this proposed settlement about? Public Comment The Tri-Party Agreement agencies want your feedback. The public comment period is from October 1 through December 11, 2009. These new commitments would address important activities that are needed to protect human health and the environment. The settlement will impose a new, enforceable and

  1. 2014-03-26 Issuance: Proposed Determination of Computer and Battery...

    Energy Savers

    and Battery Backup Systems as a Covered Consumer Product; Extension of Public Comment Period 2014-03-26 Issuance: Proposed Determination of Computer and Battery Backup ...

  2. Form GWS-53 - Application for Determination of Water Right Within...

    Open Energy Information (Open El) [EERE & EIA]

    53 - Application for Determination of Water Right Within a Designated Ground Water Basin and Denver Basin Jump to: navigation, search OpenEI Reference LibraryAdd to library...

  3. Categorical Exclusion Determination Form Project Title: Program or Program Office:

    Office of Environmental Management (EM)

    This work (Module A) involves performing the fluidized bed steam reforming (FBSR) process on caustic DWPF Offgas Condensate Tank (OGCT) in SRNL HLC, A-block. The DWPF OGCT radioactive condensate is being used to mimic a proposed Hanford Waste Treatment Plant Secondary Waste (WTP-SW) stream. Approximately 700 mL of caustic, concentrated OGCT will be fed to the process over the course of 7 individual 100-mL runs. This project will be conducted under a Hazardous Waste Treatability Study. The

  4. Categorical Exclusion Determination Form Project Title: Program or Program Office:

    Office of Environmental Management (EM)

    A fuel assembly has been selected for analysis in SRNL. The assembly will be loaded in an 8-Ton General Purpose Shipping Cask, and shipped per Onsite Safety Assessment (OSA) and Onsite Package Authorization Form (OPAF) documents to SRNL. SRNL will remove the assembly from the cask in the SRNL Shielded Cells. The assembly will have a small sample of a fuel plate removed. The sample will be collected for forensic-quality analyses by the SRNL and the assembly will be returned to Spent Fuel Project

  5. A Proposed Methodology to Determine the Leverage Impacts of Technology Deployment Programs 2008

    Energy.gov [DOE]

    This report contains a proposed methodology to determine the leverage impacts of technology deployment programs for the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

  6. 2014-02-21 Issuance: Proposed Determination of Computer Servers as a

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Covered Consumer Product; Withdrawal | Department of Energy Servers as a Covered Consumer Product; Withdrawal 2014-02-21 Issuance: Proposed Determination of Computer Servers as a Covered Consumer Product; Withdrawal This document is a pre-publication Federal Register notice withdrawing the previously proposed determination that computer servers qualify as a covered product, as issued by the Deputy Assistant Secretary for Energy Efficiency on February 21, 2014. Though it is not intended or

  7. 2014-02-21 Issuance: Proposed Determination of Computer and Battery Backup

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems as a Covered Consumer Product | Department of Energy and Battery Backup Systems as a Covered Consumer Product 2014-02-21 Issuance: Proposed Determination of Computer and Battery Backup Systems as a Covered Consumer Product This document is a pre-publication Federal Register notice of proposed determination regarding computer systems, as issued by the Deputy Assistant Secretary for Energy Efficiency on February 21, 2014. Though it is not intended or expected, should any discrepancy

  8. 2014-03-26 Issuance: Proposed Determination of Computer and Battery Backup

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Systems as a Covered Consumer Product; Extension of Public Comment Period | Department of Energy 26 Issuance: Proposed Determination of Computer and Battery Backup Systems as a Covered Consumer Product; Extension of Public Comment Period 2014-03-26 Issuance: Proposed Determination of Computer and Battery Backup Systems as a Covered Consumer Product; Extension of Public Comment Period This document is a pre-publication Federal Register notice extending the public comment period for the

  9. ISSUANCE 2016-03-25: Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment, Notice of Proposed Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment, Notice of Proposed Determination

  10. Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    132014 10:58 AM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act...

  11. Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    9:27 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be included as an attachment. Freedom of Information Act (FOIA)...

  12. Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms and Checklists Download or view forms and checklists used at WNR. IWD Forms 2100 - Integrated Work Document (IWD) Part 1, Activity Specific Information (word version) 2100_con - Integrated Work Document (IWD) Part 1, Activity Specific Information Continuation Page (word version) 2101 - Integrated Work Document (IWD) Part 2, FOD Requirements and Approval for Entry and Area Hazards and Controls, Non-Tenant Activity Form (word version) 2102 - Integrated Work Document (IWD) Part 2, FOD

  13. Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted : on this form. t Name Richard van Dijk Email , Orga nizati on Mailin g Addre ss city PA State I P Pion e Ex....

  14. ESIF Project Proposal Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Qualifications and Resources - 1.4 Decommissioning - 1.5 The following describes the ... the history, successes, and current status and goals of the Submitter's technology ...

  15. 2014 Electricity Form Proposals

    Gasoline and Diesel Fuel Update

    ... operations, and environmental performance enhanced data on energy efficiency and demand response programs a change to the confidentiality terms of most of the surveys, i.e. ...

  16. Proposed Molecular Beam Determination of Energy Partition in the Photodissociation of Polyatomic Molecules

    DOE R&D Accomplishments [OSTI]

    Zare, P. N.; Herschbach, D. R.

    1964-01-29

    Conventional photochemical experiments give no information about the partitioning of energy between translational recoil and internal excitation of the fragment molecules formed in photodissociation of a polyatomic molecule. In a molecular beam experiment, it becomes possible to determine the energy partition from the form of the laboratory angular distribution of one of the photodissociation products. A general kinematic analysis is worked out in detail, and the uncertainty introduced by the finite angular resolution of the apparatus and the velocity spread in the parent beam is examined. The experimental requirements are evaluated for he photolysis of methyl iodide by the 2537 angstrom Hg line.

  17. Air-Con International: Noncompliance Determination and Proposed Penalty (2010-SE-0301)

    Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Air-Con International finding that a variety of central air conditioners and air conditioning heat pumps distributed under the Air-Con private label do not comport with the energy conservation standards. DOE also alleged in a Notice of Proposed Civil Penalty that Air-Con imported and distributed the noncompliant products in the U.S.

  18. Determining if a change to a proposal requires additional NEPA documentation: the Smithsonian Solution

    SciTech Connect (OSTI)

    ECCLESTON, C.H.

    1999-02-23

    Proposed actions tend to evolve over time. Once National Environmental Policy Act (NEPA) documentation is completed, agencies are at risk that subsequent changes may not be adequately covered or that existing NEPA documentation maybe completely invalidated. Neither NEPA nor its subsequent regulations provide sufficient direction for determining the degree to which a proposed action may change before preparation of new or supplemental documentation is necessary. Yet, decisionmakers are routinely involved in determining if a change to a proposed action departs, to such an extent, from the description presented in the NEPA document that additional documentation is necessary. Experience demonstrates that no two decisionmakers will completely agree, one decisionmaker might believe that a particular change would not require additional documentation, while the other concludes the exact opposite. Lacking definitive direction, decisionmakers and critics alike may point to a universe of potential considerations as the basis for defending their claim that a change in an action does or does not require new or additional NEPA documentation. Assertions are often based on equivocal opinions that can be neither proved nor disproved. Moreover, decisionmakers are frequently placed in an arduous dilemma of justifying a decision, for which there is no generally accepted methodology on which to base the decision. Lack of definitive direction can prolong the decisionmaking process, resulting in project delays. This can also lead to inappropriate levels of NEPA documentation, inconsistencies in decisionmaking, and increased risk of a legal challenge because of insufficient documentation. Clearly, a more systematic and less subjective approach is needed, A tool for streamlining the NEPA process, by reducing this degree of subjectivity, is presented in this paper.

  19. Determination of operating limits for radionuclides for a proposed landfill at Paducah Gaseous Diffusion Plant

    SciTech Connect (OSTI)

    Wang, J.C.; Lee, D.W.; Ketelle, R.H.; Lee, R.R.; Kocher, D.C.

    1994-05-24

    The operating limits for radionuclides in sanitary and industrial wastes were determined for a proposed landfill at the Paducah Gaseous Diffusion Plant (PGDP), Kentucky. These limits, which may be very small but nonzero, are not mandated by law or regulation but are needed for rational operation. The approach was based on analyses of the potential contamination of groundwater at the plant boundary and the potential exposure to radioactivity of an intruder at the landfill after closure. The groundwater analysis includes (1) a source model describing the disposal of waste and the release of radionuclides from waste to the groundwater, (2) site-specific groundwater flow and contaminant transport calculations, and (3) calculations of operating limits from the dose limit and conversion factors. The intruder analysis includes pathways through ingestion of contaminated vegetables and soil, external exposure to contaminated soil, and inhalation of suspended activity from contaminated soil particles. In both analyses, a limit on annual effective dose equivalent of 4 mrem (0.04 mSv) was adopted. The intended application of the results is to refine the radiological monitoring standards employed by the PGDP Health Physics personnel to determine what constitutes radioactive wastes, with concurrence of the Commonwealth of Kentucky.

  20. Major Modification Determination Process Utilized for Proposed Idaho National Laboratory Projects

    SciTech Connect (OSTI)

    Michael A. Lehto, Ph.D.; Boyd D. Christensen

    2008-05-01

    Over the past three years, several new projects with the potential for major modifications to existing facilities have been considered for implementation at the Idaho National Laboratory (INL). These projects were designated to take place in existing nuclear facilities with existing documented safety analyses. 10 CFR 830.206 requires the contractor for a major modification to a Hazard Category 1, 2, or 3 nuclear facility to obtain Department of Energy (DOE) approval for the nuclear facility design criteria to be used for preparation of a preliminary documented safety analysis (PDSA), as well as creation and approval of the PDSA, before the contractor can procure materials or components or begin construction on the project. Given the significant effort and expense of preparation and approval of a PDSA, a major modification determination for new projects is warranted to determine if the rigorous requirements of a major modification are actually required. Furthermore, performing a major modification determination helps to ensure that important safety aspects of a project are appropriately considered prior to modification construction or equipment procurement. The projects considered for major modification status at the INL included: treatment and packaging of unirradiated, sodium-bonded highly enriched uranium (HEU) fuel and miscellaneous casting scrap in the Materials and Fuels Complex (MFC) Fuel Manufacturing Facility (FMF); post irradiation examination of Advance Fuel Cycle Initiative (AFCI) fuel in the MFC Analytical Laboratory (AL); the Advanced Test Reactor (ATR) gas test loop (GTL); and the hydraulic shuttle irradiation system (HSIS) at ATR. The major modification determinations for three of the proposed projects resulted in a negative major modification. On the other hand, the major modification determination for the GTL project concluded that the project would require a major modification. This paper discusses the process, methods, and considerations used by

  1. System and method for forming synthetic protein crystals to determine the conformational structure by crystallography

    DOE Patents [OSTI]

    Craig, G.D.; Glass, R.; Rupp, B.

    1997-01-28

    A method is disclosed for forming synthetic crystals of proteins in a carrier fluid by use of the dipole moments of protein macromolecules that self-align in the Helmholtz layer adjacent to an electrode. The voltage gradients of such layers easily exceed 10{sup 6}V/m. The synthetic protein crystals are subjected to x-ray crystallography to determine the conformational structure of the protein involved. 2 figs.

  2. System and method for forming synthetic protein crystals to determine the conformational structure by crystallography

    DOE Patents [OSTI]

    Craig, George D.; Glass, Robert; Rupp, Bernhard

    1997-01-01

    A method for forming synthetic crystals of proteins in a carrier fluid by use of the dipole moments of protein macromolecules that self-align in the Helmholtz layer adjacent to an electrode. The voltage gradients of such layers easily exceed 10.sup.6 V/m. The synthetic protein crystals are subjected to x-ray crystallography to determine the conformational structure of the protein involved.

  3. Administrative Forms/Policies

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Administrative Forms Microfab Project Proposal Form Exit Form After Hours Request Form

  4. DOE Publishes Supplemental Notice of Proposed Rulemaking for Alternative Efficiency Determination Methods and Alternative Rating Methods

    Energy.gov [DOE]

    The Department of Energy has published a supplemental notice of proposed rulemaking to revise and expand its existing regulations governing the use of particular methods as alternatives to testing for commercial heating, ventilating, air-condition

  5. Proposal for determining the energy content of gravitational waves by using approximate symmetries of differential equations

    SciTech Connect (OSTI)

    Hussain, Ibrar; Qadir, Asghar; Mahomed, F. M.

    2009-06-15

    Since gravitational wave spacetimes are time-varying vacuum solutions of Einstein's field equations, there is no unambiguous means to define their energy content. However, Weber and Wheeler had demonstrated that they do impart energy to test particles. There have been various proposals to define the energy content, but they have not met with great success. Here we propose a definition using 'slightly broken' Noether symmetries. We check whether this definition is physically acceptable. The procedure adopted is to appeal to 'approximate symmetries' as defined in Lie analysis and use them in the limit of the exact symmetry holding. A problem is noted with the use of the proposal for plane-fronted gravitational waves. To attain a better understanding of the implications of this proposal we also use an artificially constructed time-varying nonvacuum metric and evaluate its Weyl and stress-energy tensors so as to obtain the gravitational and matter components separately and compare them with the energy content obtained by our proposal. The procedure is also used for cylindrical gravitational wave solutions. The usefulness of the definition is demonstrated by the fact that it leads to a result on whether gravitational waves suffer self-damping.

  6. Determination of the Rate of Formation of Hydroceramic Waste Forms made with INEEL Calcined Wastes

    SciTech Connect (OSTI)

    Barry Scheetz; Johnson Olanrewaju

    2001-10-15

    The formulation, synthesis, characterization and hydration kinetics of hydroceramic waste forms designed as potential hosts for existing INEEL calcine high-level wastes have been established as functions of temperature and processing time. Initial experimentations were conducted with several aluminosilicate pozzolanic materials, ranging from fly ash obtained from various power generating coal and other combustion industries to reactive alumina, natural clays and ground bottled glass powders. The final selection criteria were based on the ease of processing, excellent physical properties and chemical durability (low-leaching) determined from the PCT test produced in hydroceramic. The formulation contains vermiculite, Sr(NO32), CsC1, NaOH, thermally altered (calcined natural clay) and INEEL simulated calcine high-level nuclear wastes and 30 weight percent of fluorinel blend calcine and zirconia calcine. Syntheses were carried out at 75-200 degree C at autogeneous water pressure (100% relative humidity) at various time intervals. The resulting monolithic compact products were hard and resisted breaking when dropped from a 5 ft height. Hydroceramic host mixed with fluorinel blend calcine and processed at 75 degree C crumbled into rice hull-side grains or developed scaly flakes. However, the samples equally possessed the same chemical durability as their unbroken counterparts. Phase identification by XRD revealed that hydroceramic host crystallized type zeolite at 75-150 degree C and NaP1 at 175-200 degree C in addition to the presence of quartz phase originating from the clay reactant. Hydroceramic host mixed with either fluorinel blend calcine or zirconia calcine crystallized type A zeolite at 75-95 degree C, formed a mixture of type A zeolite and hydroxysodalite at 125-150 degree C and hydroxysodalite at 175-200 degree C. Quartz, calcium fluoride and zirconia phases from the clay reactant and the two calcine wastes were also detected. The PCT test solution

  7. Online Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Microfabrication | Safety Online Forms, Guidelines & Policies Questions of How to Get Started? - Click here! User Forms: Beamtime Request Form - pdf CAMD Gas Cylinder Request Form - pdf Compressed Gas Purchase Order - pdf Exposure Request Form - pdf (How To Fill the Exposure Request Form?) Format for Annual User Reports - pdf Microfabrication Project Proposal Form - pdf Synchrotron Project Proposal Form - pdf Registration & Test Application for Facility Access & Radiation Badge - pdf

  8. Price/Cost Proposal Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 1980's 4.81 2.91 3.15 2.98 3.01 1990's 3.59 3.71 3.43 3.34 3.18 3.41 3.65 3.83 2.91 3.10 2000's 4.32 4.40 4.08 4.47 4.96 5.79 6.02 6.23 7.69 8.40 2010's 9.53 10.54 12.82 13.36 15.66 10.92 Feet)

    Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1997 4.25 4.29 4.22 4.06 3.98 4.22 2001 4.69 4.74 4.71 4.26 4.23 4.29 4.28 4.30 4.40 4.41 4.30 4.30 2002 4.27 4.04 3.74 3.68 3.79 3.85 4.09 4.26 4.30 4.28 4.30

  9. 2012 Uranium Survey Form Proposals

    Gasoline and Diesel Fuel Update

    Information and Regulatory Affairs, Office of Management and Budget, New Executive Office Building, Room 10102, 735 17th Street, NW, Washington, DC 20503, and to Douglas Bonnar,...

  10. ISSUANCE 2016-02-26: Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Supplemental Proposed Determination of Miscellaneous Refrigeration Products as Covered Products

    Energy.gov [DOE]

    Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Supplemental Proposed Determination of Miscellaneous Refrigeration Products as Covered Products

  11. NEPA Determination Form

    National Nuclear Security Administration (NNSA)

    ... capped on the far end to prevent soil and water from entering the duct; a locator ball may ... pollution prevention, Resource Conservation and Recovery Act, and water quality. ...

  12. Structure of spontaneously formed solid-electrolyte interphase on lithiated graphite determined using small-angle neutron scattering

    DOE PAGES-Beta [OSTI]

    Sacci, Robert L.; Banuelos, Jose Leobardo; Veith, Gabriel M.; Littrell, Ken C.; Cheng, Yongqiang Q.; Wildgruber, Christoph U.; Jones, Lacy L.; Ramirez-Cuesta, Anibal J.; Rother, Gernot; Dudney, Nancy J.

    2015-03-25

    We report the first small-angle neutron scattering of a chemically formed solid-electrolyte interphase from LixC6 reacting with ethylene carbonate/dimethyl carbon solvent. This provides a different and perhaps simpler view of SEI formation than the usual electrochemically-driven reaction. We show that an organic layer coats the graphite particles filling in micro-pores and is polymeric in nature being 1-3 nm thick. We used inelastic neutron scattering to probe the chemistry, and we found that the SEI showed similar inelastic scattering to polyethylene oxide.

  13. Structure of spontaneously formed solid-electrolyte interphase on lithiated graphite determined using small-angle neutron scattering

    SciTech Connect (OSTI)

    Sacci, Robert L [ORNL; Banuelos, Jose Leo [ORNL; Veith, Gabriel M [ORNL; Littrell, Ken [ORNL; Cheng, Yongqiang [ORNL; Wildgruber, Christoph U [ORNL; Jones, Lacy L [ORNL; Ramirez-Cuesta, Anibal J [ORNL; Rother, Gernot [ORNL; Dudney, Nancy J [ORNL

    2015-01-01

    We report the first small-angle neutron scattering of a chemically formed solid-electrolyte interphase from LixC6 reacting with ethylene carbonate/dimethyl carbon solvent. This provides a different and perhaps simpler view of SEI formation than the usual electrochemically-driven reaction. We show that an organic layer coats the graphite particles filling in micro-pores and is polymeric in nature being 1-3 nm thick. We used inelastic neutron scattering to probe the chemistry, and we found that the SEI showed similar inelastic scattering to polyethylene oxide.

  14. Proposal Form Guidelines | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    for the first time, enter your badge number and also use your badge number for your initial password. Once you are logged in, the system will ask you to change your password. ...

  15. project_proposal_form_XAS.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    (eV) EXAFS XANES Edge Energy (eV) EXAFS XANES 3. Method of Data Collection: Transmission Electron Yield Fluorescence 4. Describe the...

  16. Service Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form...

  17. Sorption testing and generalized composite surface complexation models for determining uranium sorption parameters at a proposed in-situ recovery site

    DOE PAGES-Beta [OSTI]

    Johnson, Raymond H.; Truax, Ryan A.; Lankford, David A.; Stone, James J.

    2016-02-03

    Solid-phase iron concentrations and generalized composite surface complexation models were used to evaluate procedures in determining uranium sorption on oxidized aquifer material at a proposed U in situ recovery (ISR) site. At the proposed Dewey Burdock ISR site in South Dakota, USA, oxidized aquifer material occurs downgradient of the U ore zones. Solid-phase Fe concentrations did not explain our batch sorption test results,though total extracted Fe appeared to be positively correlated with overall measured U sorption. Batch sorption test results were used to develop generalized composite surface complexation models that incorporated the full genericsorption potential of each sample, without detailedmore » mineralogiccharacterization. The resultant models provide U sorption parameters (site densities and equilibrium constants) for reactive transport modeling. The generalized composite surface complexation sorption models were calibrated to batch sorption data from three oxidized core samples using inverse modeling, and gave larger sorption parameters than just U sorption on the measured solidphase Fe. These larger sorption parameters can significantly influence reactive transport modeling, potentially increasing U attenuation. Because of the limited number of calibration points, inverse modeling required the reduction of estimated parameters by fixing two parameters. The best-fit models used fixed values for equilibrium constants, with the sorption site densities being estimated by the inversion process. While these inverse routines did provide best-fit sorption parameters, local minima and correlated parameters might require further evaluation. Despite our limited number of proxy samples, the procedures presented provide a valuable methodology to consider for sites where metal sorption parameters are required. Furthermore, these sorption parameters can be used in reactive transport modeling to assess downgradient metal attenuation, especially when no other

  18. RAPIDD Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    by ALS management, appropriate to the proposal. Rapid Access Proposals (RA) A proportion of beam time on some beamlines is reserved to provide rapid access for simple,...

  19. Forms & Documents | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms & Documents Incremental Budget Request Form FY 2016 Field Work Proposal (FWP) use for WAS Field Work Proposal (FWP) Out-of-Cycle use for proposals LDRD Budget Template New ...

  20. JLF Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    jlf forms JLF Forms JLF Target Fab Request JLF Experiment Worksheet JLF-Experimental Team Registration Form JLF-LLNL Participant Registration Form JLF-External Participant Registration Form JLF-Debriefing Form

  1. ARM - Propose a Field Campaign

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    govCampaignsPropose a Campaign Guidelines Overview Annual Facility Call Proposal Deadline Guidance Small Field Campaigns Review Criteria Expectations for Principal Investigators Forms Propose a Campaign Instrument Support Request (ISR) Form (Word, 89KB) Unmanned Aerial System (UAS) Mission Request Form (Word, 72KB) Documentation Submitting Field Campaign Data and Metadata Field Campaign Guidelines (PDF, 574KB) Unmanned Aerial System Operation Safety at ARM Sites (PDF, 639KB) Propose a Campaign :

  2. Unsolicited Proposals

    Energy.gov [DOE]

    The Department of Energy's (DOE’s) central point of receipt for all Unsolicited Proposals is the National Energy Technology Laboratory (NETL) which includes all DOE Program Research Areas.   

  3. Proposed Rules

    National Nuclear Security Administration (NNSA)

    4414 Federal Register / Vol. 78, No. 209 / Tuesday, October 29, 2013 / Proposed Rules NRC about the availability of information for the proposed Waste Confidence rule and DGEIS. You may access publicly available information related to these documents by any of the following methods: * Federal Rulemaking Web Site: Go to http://www.regulations.gov and search for Docket ID NRC-2012-0246. * NRC's Waste Confidence Web site: Go to http://www.nrc.gov/waste/spent- fuel-storage/wcd.html. * NRC's

  4. Proposed Rules

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    337 Federal Register / Vol. 81, No. 156 / Friday, August 12, 2016 / Proposed Rules 1 The use of the word ''order'' in this context refers to Compliance Orders issued under subpart Continued DEPARTMENT OF ENERGY 10 CFR Part 820 [Docket No. EA-RM-16-PRDNA] RIN 1992-AA52 Procedural Rules for DOE Nuclear Activities AGENCY: Office of Enterprise Assessments, Office of Enforcement, Office of Nuclear Safety Enforcement, Department of Energy. ACTION: Notice of proposed rulemaking. SUMMARY: The U.S.

  5. Unsolicited Proposals

    Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-02-27

    The order sets forth Department of Energy (DOE) requirements and responsibilities for the receipt, processing, and review of unsolicited proposals (USPs). To ensure that those submitting USPs are notified in a timely manner of the status (e.g., pending, accepted for funding, or declined) of their Supersedes DOE O 542.2. Certified 12-28-06.

  6. ARM - Submitting Proposals : Guideline Overview

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    govField CampaignsSubmitting Proposals : Guideline Overview Guidelines Overview Annual Facility Call Proposal Deadline Guidance Small Field Campaigns Review Criteria Expectations for Principal Investigators Forms Propose a Campaign Instrument Support Request (ISR) Form (Word, 89KB) Unmanned Aerial System (UAS) Mission Request Form (Word, 72KB) Documentation Submitting Field Campaign Data and Metadata Field Campaign Guidelines (PDF, 574KB) Unmanned Aerial System Operation Safety at ARM Sites

  7. A New Real-Time Method for Determining Particles Sphericity and Density: Application to Secondary Organic Aerosol Formed by Ozonolysis of alpha-Pinene

    SciTech Connect (OSTI)

    Zelenyuk, Alla; Yang, Juan; Song, Chen; Zaveri, Rahul A.; Imre, Dan G.

    2008-11-01

    Particle volumes are most often obtained by measuring particle mobility size distributions and assuming that the particles are spherical. These volumes are then converted to mass loads by using particle densities that are commonly either assumed or estimated from the measured mobility and vacuum aerodynamic diameters assuming again that the particles are spherical. Depending on the system, these assumptions can introduce significant errors. We present a new method that can be applied to any particle system to determine in real-time whether the particles are spherical or not. We use our 2nd generation single particle mass spectrometer (SPLAT II) to measure with extremely high precision the vacuum aerodynamic size distributions of particles classified by differential mobility analyzer (DMA) and demonstrate that the line shape of these distributions provide a way to unambiguously distinguish between spherical and aspherical particles. Moreover, the very same experimental system is used to obtain in addition to individual particle size, its density, composition and dynamic shape factor. We illustrate the application of this method to secondary organic aerosols formed as a result of ozonolysis of ?-pinene in the presence and absence of an OH scavenger and find these particles to be spherical with densities of 1.1980.004 gcm-3 and 1.2130.003 gcm-3 respectively.

  8. A Proposal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    A Proposal for a New Experiment Using the Booster and NuMI Neutrino Beamlines: MicroBooNE October 15, 2007 H. Chen, J. Farrell, F. Lanni, D. Lissauer, D. Makowiecki, J. Mead, V. Radeka, S. Rescia, J. Sondericker, B. Yu Brookhaven National Laboratory, Upton, NY L. Bugel, J. M. Conrad, V. Nguyen, M. Shaevitz, W. Willis ‡ Columbia University, New York, NY C. James, S. Pordes, G. Rameika Fermi National Accelerator Laboratory, Batavia, IL C. Bromberg, D. Edmunds Michigan State University, Lansing,

  9. Form Approv

    Energy.gov (indexed) [DOE]

    District. Townships, Ranges, and Sections cros sed by the proposed project are shown below. Range 6W Township ISS Description of the Proposed Action: BP A has a need to...

  10. ESPC ENABLE Final Proposal Requirements

    Energy.gov [DOE]

    Document describes the final proposal requirements for consideration by an energy service company (ESCO) for an agency’s Request for Quote/Notice of Opportunity or final proposal. If selected to perform a site investment grade audit, the ESCO will be required to present the findings from the IGA and a project price to the agency in the form of a final proposal.

  11. Description of Proposed Action

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical

  12. 2015 Discovery Science Call for Proposal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    users 2015 Discovery Science Call for Proposal Reference Links: - Basic NIF Specs (User ... proposals via the web based form June 30, 2015. Full proposals are due by September 1, ...

  13. ARM - Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Send Forms To assist researchers in the conduct of field campaigns or required administrative procedures (such as Baseline Change Requests), we provide a number of...

  14. Investigating nearby star-forming galaxies in the ultraviolet with HST/COS spectroscopy. I. Spectral analysis and interstellar abundance determinations

    SciTech Connect (OSTI)

    James, B. L.; Aloisi, A.; Sohn, S. T.; Wolfe, M. A.; Heckman, T.

    2014-11-10

    This is the first in a series of three papers describing a project with the Cosmic Origins Spectrograph on the Hubble Space Telescope to measure abundances of the neutral interstellar medium (ISM) in a sample of nine nearby star-forming galaxies. The goal is to assess the (in)homogeneities of the multiphase ISM in galaxies where the bulk of metals can be hidden in the neutral phase, yet the metallicity is inferred from the ionized gas in the H II regions. The sample, spanning a wide range in physical properties, is to date the best suited to investigate the metallicity behavior of the neutral gas at redshift z = 0. ISM absorption lines were detected against the far-ultraviolet spectra of the brightest star-forming region(s) within each galaxy. Here we report on the observations, data reduction, and analysis of these spectra. Column densities were measured by a multicomponent line-profile fitting technique, and neutral-gas abundances were obtained for a wide range of elements. Several caveats were considered, including line saturation, ionization corrections, and dust depletion. Ionization effects were quantified with ad hoc CLOUDY models reproducing the complex photoionization structure of the ionized and neutral gas surrounding the UV-bright sources. An 'average spectrum of a redshift z = 0 star-forming galaxy' was obtained from the average column densities of unsaturated profiles of neutral-gas species. This template can be used as a powerful tool for studies of the neutral ISM at both low and high redshift.

  15. Determination of the Form Factors for the Decay B0 -> D*-l+nu_l and of the CKM Matrix Element |Vcb|

    SciTech Connect (OSTI)

    Aubert, B.

    2006-09-26

    The authors present a combined measurement of the Cabibbo-Kobayashi-Maskawa matrix element |V{sub cb}| and of the parameters {rho}{sup 2}, R{sub 1}, and R{sub 2}, which fully characterize the form factors of the B{sup 0} {yields} D*{sup -}{ell}{sup +}{nu}{sub {ell}} decay in the framework of HQET, based on a sample of about 52,800 B{sup 0} {yields} D*{sup -}{ell}{sup +}{nu}{sub {ell}} decays recorded by the BABAR detector. The kinematical information of the fully reconstructed decay is used to extract the following values for the parameters (where the first errors are statistical and the second systematic): {rho}{sup 2} = 1.156 {+-} 0.094 {+-} 0.028, R{sub 1} = 1.329 {+-} 0.131 {+-} 0.044, R{sub 2} = 0.859 {+-} 0.077 {+-} 0.022, F(1)|V{sub cb}| = (35.03 {+-} 0.39 {+-} 1.15) x 10{sup -3}. By combining these measurements with the previous BABAR measurements of the form factors which employs a different technique on a partial sample of the data, they improve the statistical accuracy of the measurement, obtaining: {rho}{sup 2} = 1.179 {+-} 0.048 {+-} 0.028, R{sub 1} = 1.417 {+-} 0.061 {+-} 0.044, R{sub 2}, = 0.836 {+-} 0.037 {+-} 0.022, and F(1)|V{sub cb}| = (34.68 {+-} 0.32 {+-} 1.15) x 10{sup -3}. Using the lattice calculations for the axial form factor F(1), they extract |V{sub cb}| = (37.74 {+-} 0.35 {+-} 1.25 {+-} {sub 1.44}{sup 1.23}) x 10{sup -3}, where the third error is due to the uncertainty in F(1).

  16. Experimental determination of the speciation, partitioning, and release of perrhenate as a chemical surrogate for pertechnetate from a sodalite-bearing multiphase ceramic waste form

    SciTech Connect (OSTI)

    Pierce, Eric M.; Lukens, Wayne W.; Fitts, Jeff. P.; Jantzen, Carol. M.; Tang, G.

    2013-12-01

    A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk X-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 ?C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion

  17. 2014-09-18 Issuance: Energy Conservation Standard for Alternative Efficiency Determination Methods, Basic Model Definition, and Compliance for Commercial HVAC, Refrigeration, and Water Heating Equipment; Supplemental Notice of Proposed Rulemaking

    Energy.gov [DOE]

    This document is a pre-publication Federal Register supplemental notice of proposed rulemaking regarding energy conservation standards for alternative efficiency determination methods, basic model definition, and compliance for commercial HVAC, Refrigeration, and Water Heating Equipment, as issued by the Deputy Assistant Secretary for Energy Efficiency on September 18, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  18. CY2017 Proposal Submission Instructions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    proposal submission instructions CY2017 Proposal Submission Instructions A proposal is necessary for shot-time allocated on the Titan, Janus, and COMET laser platforms at the Jupiter Laser Facility (JLF). The CY2017 period is January through December 2017. JLF will be closed until March 2017 for maintenance and upgrades. Experiment time will be allotted in 4-week Experimental Run Periods, with one-week maintenance breaks between experiments. The schedule will be determined after proposals have

  19. Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The Research Library may not have the resources to handle all requests from the public. Question? 667-5809 Email The Request Form is for internal use only. Login to SSL-Portal, or ...

  20. Form Approved

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OGE Form 450, 5 CFR Part 2634, Subpart I U.S. Office of Government Ethics (January 2007) (Replaces September 2002 edition) Form Approved OMB NO. 3209-0006 CONFIDENTIAL FINANCIAL DISCLOSURE REPORT Executive Branch Why Must I File? The duties and responsibilities of your position require you to file the Confidential Financial Disclosure Report to avoid involvement in a real or apparent conflict of interest. The purpose of this report is to assist employees and their agencies in avoiding conflicts

  1. Structure of a B{sub 6}-like phase formed from bent-core liquid crystals determined by microbeam x-ray diffraction

    SciTech Connect (OSTI)

    Kang, Sungmin; Tokita, Masatoshi; Takanishi, Yoichi; Takezoe, Hideo; Watanabe, Junji

    2007-10-15

    We studied the structure of the B{sub x} phase formed from the short terminal homolog, 1,3-(4-bromobenzene) bis[4-(4-n-butoxyphenylliminomethyl)benzoate] (4Br-P-4-O-PIMB), by focusing a microbeam of x ray on the well-developed fan-shaped texture. From the highly oriented x-ray patterns detected at the two states of DC-ON and DC-OFF, the B{sub x} structure was definitely illustrated. It is a kind of frustrated one similar to the B{sub 1} phase: the molecules lie perpendicularly to the layer, and the frustration takes place perpendicularly to the bent direction. Unlike in the B{sub 1} phase, however, the size of the resulting antidomain is not definite, but fluctuates from position to position as observed in the B{sub 6} phase.

  2. Return on investment (ROI) proposal preparation guide

    SciTech Connect (OSTI)

    VALERO, O.J.

    1998-10-09

    The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to Department of Energy, Richland Operations Office (DOE/RL) for funding. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary to complete the ROI forms, and submit a proposal that is eligible to receive funding.

  3. Return on investment (ROI) proposal preparation guide

    SciTech Connect (OSTI)

    Renner, J.C., Westinghouse Hanford

    1997-01-21

    The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to RL. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary complete the ROI forms with all of the required information, and submit a proposal that is eligible to receive funding.

  4. Proposals and Design Reports

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals and Design Reports Proposals and Design Reports Proposal (1204) Proposal Addendum (29304) Physics Case and Detector Technology Report (1204) Technical Design Report ...

  5. ExRep_form.indd

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Report Submit all experiment reports using this fillable pdf form and upload the saved file using the LANSCE proposals Websi After logging in, click the "Upload Experiment Report" link in the proposal actions view table. Local contact Flight path/instrument Proposal number Title Authors and Affiliations Experiment report

  6. Employee Information Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information Form Employee Information Form New Employee Information Form (103.85 KB) More Documents & Publications TEE-0074 - In the Matter of GE Appliances & Lighting CX-007131: Categorical Exclusion Determination CX-007148: Categorical Exclusion Determination

  7. Tentative_Agreement_and_Proposed_Change_Forms.pdf

    U.S. Department of Energy (DOE) all webpages (Extended Search)

  8. Proposed Changes to Electricity and Renewable (Photovoltaic)...

    Gasoline and Diesel Fuel Update

    ... U.S. Energy Information Administration | 2017 Proposed Solar & Electricity Survey Form ... Fuel receipts and costs EIA-923: Natural gas receipts would no longer be reported by ...

  9. Field Work Proposal (FWP) | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Field Work Proposal (FWP) Version Number: 4.0 Document Number: Form 58100.007 Effective Date: 022015 File (public): Microsoft Office document icon form58100.007rev4.doc...

  10. Microsoft Word - CX Determination Form.docx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... and operation of machinery and equipment (including, but not limited to, laboratory equipment, electronic hardware, manufacturing machinery, maintenance equipment, and ...

  11. LANSCE | User Resources | Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals LANSCE accepts proposals for the Lujan Neutron Scattering Center, Proton Radiography (pRad) and the Weapons Neutron Research Facility (WNR). Calls for proposals are typically issued twice a year, for each run cycle of the accelerator. Deadlines will be posted. Lujan Center pRad WNR Lujan Center call for proposals is closed. Proposal Submission Read the Lujan Center call for proposals. Deadline: May 21, 2016, 5:00 p.m. (MDT) Unclassified Proposal Submission: Unclassified proposals must

  12. Radiation Safety Work Control Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely

  13. General User Proposals (GUPs)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    or until the number of shifts recommended by the Proposal Study Panels (PSP) for the life of the proposal have been used. Users may decide whether to submit a new proposal or...

  14. SSRL Call for Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Call for Proposals for the Stanford Synchrotron Radiation Laboratory * X-ray/VUV proposals are due May 1 ** Macromolecular Crystallography proposals are due April 1 and July 1 Due to the installation and commissioning of SPEAR3 (April 2003-January 2004), the schedule for proposal submissions has been adjusted slightly. Please note that we will not be soliciting proposals as usual for the November (X-Ray/VUV) and December (MX) deadlines. Users have the following opportunities to submit proposals

  15. Trident Call for Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Trident Call for Proposals Trident Call for Proposals Enabling world-class science in high-energy density physics and fundamental laser-matter interactions Contact Operations Team ...

  16. APPENDIX A: Forms and Instructions Form Form R93D-44 Form R93D...

    U.S. Energy Information Administration (EIA) (indexed site)

    and Instructions Form Form R93D-44 Form R93D-03 Form R93D-59 Instructions Form RT94-02 Form RT94-04 Form RT94-0 Form RT94-03 Form RT94-05 Form RT94-06 Instructions Form...

  17. NETL: Unsolicited Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Unsolicited Proposals The Department of Energy's (DOE's) central point of receipt for all Unsolicited Proposals is the National Energy Technology Laboratory (NETL) as outlined in the link below which includes all DOE Program Research Areas. The "Guide for the Submission of Unsolicited Proposals" provides more information on the unsolicited proposal process. DOE encourages organizations and individuals to submit self-generated, unsolicited proposals that are relevant to DOE's research

  18. LANSCE | User Resources | Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals dotline Lujan Center: Material Science FY17 Call for Proposals Proposal Submission: https://www.lanl.gov/orgs/lansce/ Lujan Center Call for Proposals is Open. Deadline: May 21, 2016 at 5:00 pm (MDT). lansce.lanl.gov lansce.lanl.gov/lujan The Los Alamos Neutron Science Center (LANSCE) invites proposals for material science experiments at the Lujan Center addressing science of NNSA and LANL programmatic interest for the September 2016 - February 2017 run cycle. The Lujan Center utilizes

  19. PROPOSAL PREPARATION INSTRUCTIONS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contract No. DE-AC27-08RV14800 Modification No. A015 PROPOSAL PREPARATION INSTRUCTIONS 1. INTRODUCTION This document contains instructions to the contractor for the preparation of a proposal in response to the modification of the contract which defines work that will be funded by and performed under the provisions of the American Recovery and Reinvestment Act (Recovery Act). The contractor shall provide a written proposal consisting of a Technical Proposal and a Cost and Fee Proposal. The

  20. Call for Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals | FY2016 pRad: Call for Proposals Proposal Submission Deadline: 5:00 pm (MST) Wednesday, March 16, 2016. PAC Review: April 6th and 7th, 2016. Call for Proposals: Proton Radiography FY17 The Los Alamos Neutron Science Center (LANSCE) is issuing a Call for Proposals for experiments for the Proton Radiography Facility (pRad) during Fiscal Year 2017. Proposals for FY18 experiments that will not be ready to be performed FY17 will be considered. The proton radiography facility uses 800 MeV

  1. Densified waste form and method for forming

    SciTech Connect (OSTI)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  2. Densified waste form and method for forming

    DOE Patents [OSTI]

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2016-05-17

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  3. LANSCE | User Resources | Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Update: in FY17 run cycle pRad is expecting to make the x7 magnifier and the powder gun available for dynamic user experiments. Proposal Selection Submitted proposals will be ...

  4. Call for Proposal Submissions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    call for proposal submissions Call for Proposal Submissions The Jupiter Laser Facility (JLF) announces that the Request for Proposals for the JLF User Program for experiments in Calendar Year 2017, January through December, is open. Jupiter is a multi-platform, intermediate-scale laser user facility located at Lawrence Livermore National Laboratory. Proposals will be accepted for the laser platforms Titan, Janus, and COMET. Information and submission instructions are available at

  5. Submit CSES Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Submit Proposals Submit CSES Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email FY16 Call for Proposals period is now closed. The Center for Space and Earth Science (CSES) at Los Alamos National Laboratory (LANL) annually solicits proposals in the disciplines of geoscience, climate,

  6. Microsoft Word - LANL SCI CLEARANCE REQUEST FORM.docx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Save UNCLASSIFIEDOUO CSES PROPOSAL COVER SHEET Instructions: Submit the cover sheet with your CSES proposal as attachments to CSESProposals@lanl.gov. This form is Unclassified ...

  7. Requests for Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Requests for Proposals Requests for Proposals World-class experts and capabilities countering all aspects of explosive threats, and aiming predominantly at enhanced detection capabilities. What LACED cannot do LACED is prohibited by US Federal Law from responding to RFPs on its own or as a co-respondent. Organizations responding to a RFP can reference a "unique" capability or service available at LACED in an RFP proposal response. Such a reference should specify that LACED

  8. Categories for CSES Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposal Categories Categories for CSES Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email CSES offers several program elements. New to CSES is a more flexible proposal schedule - not all program elements are offered in each call, and some program elements have calls more than once per

  9. Categories for IGPPS Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    on an independent, revolutionary scientific idea that has Los Alamos National Laboratory mission relevance. The proposed work must not be related to the programmatic research...

  10. General User Proposals (GUPs)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    operates the beamline. Before Submitting a Proposal Review the ALS Beamlines Directory to learn about the research capabilities of individual beamlines at the ALS. Contact the...

  11. Microsoft Word - OST-15-002-Old-AOWC-Determination

    National Nuclear Security Administration (NNSA)

    HEDP 12-001-015 National Nuclear Security Administration Categorical Exclusion Determination Form Proposed Action Title: Old AOWC Rebuild Project Program or Field Office: NNSA/OST Location(s) (City/County/State): Kirtland Air Force Base, Albuquerque, NM Proposed Action Description: The National Nuclear Security Administration (NNSA) Office of Secure Transportation (OST) proposes to demolish eight temporary, modular structures at the Old Agent Operations Western Command (AOWC) and build a new

  12. Microsoft Word - LANL SCI CLEARANCE REQUEST FORM.docx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    classified information. Do not use MAC Preview tool to complete this form as the tool causes data corruption issues. Submit completed form and your IGPPS proposal to...

  13. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  14. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms Forms The following interactive Web-based forms in Adobe Acrobat Portable Document Format (PDF) are designed for online completion with Acrobat Reader. Input data will ...

  15. proposal.dvi

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... time for this approval to enter into funding deliberations ... we envisage a dedicated search for strangeness-changing ... structure functions or in terms of form factors for the ...

  16. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Form 4220.2 (Revised January 2014) Office of Small and Disadvantaged Business Utilization Small Business Review OSDBU Control Number: _______________________________________Date Received: ______________________________ A. Project Information 1. Requisition Number: ________________________ Acquisition Instrument Proposed/Contract Type: [ ] Contract No (Mod): ______________________ [ ] Departmental IDIQ No: ___________________ [ ] GSA Schedule: _________________________ [ ] GWAC Contract:

  17. CX-010510: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    510: Categorical Exclusion Determination CX-010510: Categorical Exclusion Determination Rapid Freeform Sheet Metal Forming: Technology Development and System Verification CX(s) Applied: A9, B3.6 Date: 06/24/2013 Location(s): Michigan, Illinois, Pennsylvania Offices(s): Golden Field Office The U.S. Department of Energy (DOE) is proposing to provide federal funding to Ford Motor Company to develop a transformational rapid freeform sheet metal forming technology in an industrial environment.

  18. Forms & Applications | Stanford Synchrotron Radiation Lightsource

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms & Applications Forms: Before You Arrive User Information Log in to the User Portal to Register or Update Contact Informatioin Proposals Submit Proposals via User Portal (including Rapid Access and Letters of Intent) Proposal Extension Requests X-ray/VUV/SMB Macromolecular Crystallography (MC) User Agreements Non-Proprietary User Agreement Proprietary Research User Agreement Beam Time & Support Requests Log in to User Portal to Submit Beam Time or User Support Requests Computer

  19. Approved Program Proposals (AP)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    be sent out for external review and will also be evaluated by the Proposal Study Panels (PSP), which will provide its evaluation to the Scientific Advisory Committee (SAC). The SAC...

  20. Approved Program Proposals (AP)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    its recommendations to the ALS Division Director. A letter will be sent to the PIs of successful proposals specifying the percentage of beam time and the period of the AP. The...

  1. PROPOSAL PREPARATION INSTRUCTIONS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contract No. DE-AC27-08RV14800 Modification No. A015 PROPOSAL PREPARATION INSTRUCTIONS 1. ... in response to the modification of the contract which defines work that will be funded ...

  2. PROPOSED RULEMAKING MEETING

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    UNITED STATES DEPARTMENT OF ENERGY INTEGRATED INTERAGENCY PRE-APPLICATION (IIP) NOTICE OF PROPOSED RULEMAKING PUBLIC WORKSHOP Washington, D.C. Tuesday, March 22, 2016 PROPOSED RULEMAKING MEETING Page: 2 Anderson Court Reporting -- 703-519-7180 -- www.andersonreporting.net 1 PARTICIPANTS: 2 SARAH BALL Edison Electric Institute 3 CAITLIN CALLAGHAN 4 US DOE/OE 5 LESLIE CARPENTER TEP 6 SUSAN CHILSON 7 American Transmission Company 8 STEPHEN FUSILIER Bureau of Land Management 9 DEVIN GLADDEN 10 US

  3. CSES Call for Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposals FY17 CSES Call for Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email Science Discipline Leaders Astrophysics & Cosmology Hui Li (505) 665-3131 Email Climate Keeley Costigan (505) 665-4788 Email Geophysics David Coblentz (505) 667-2781 Email Space Physics Geoffrey Reeves (505)

  4. Microsoft Word - LANL SCI CLEARANCE REQUEST FORM.docx

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Save UNCLASSIFIED/OUO CSES PROPOSAL COVER SHEET Instructions: Submit the cover sheet with your CSES proposal as attachments to CSES_Proposals@lanl.gov. This form is Unclassified and should NOT include classified information. Do not use MAC Preview tool to complete this form as the tool causes data corruption issues. Proposal Title (required): Proposal Discipline (select all that apply): Astrophysics and Cosmology Climate Geosciences Space Proposed Start Date & Duration (required): Start

  5. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  6. CSC Draft Information Collection Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Draft Information Collection Form CSC Draft Information Collection Form CSC Draft Information Collection Form (119.4 KB) More Documents & Publications CSC Proposed Information Collection Presentation Convention on Supplementary Compensation Rulemaking CIGNL Questions

  7. Proposed Drill Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    Proposed drill sites for intermediate depth temperature gradient holes and/or deep resource confirmation wells. Temperature gradient contours based on shallow TG program and faults interpreted from seismic reflection survey are shown, as are two faults interpreted by seismic contractor Optim but not by Oski Energy, LLC.

  8. Proposed Drill Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Lane, Michael

    2013-06-28

    Proposed drill sites for intermediate depth temperature gradient holes and/or deep resource confirmation wells. Temperature gradient contours based on shallow TG program and faults interpreted from seismic reflection survey are shown, as are two faults interpreted by seismic contractor Optim but not by Oski Energy, LLC.

  9. Unsolicited Proposals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Unsolicited Proposals Unsolicited Proposals The Department of Energy's (DOE's) central point of receipt for all Unsolicited Proposals is the National Energy Technology Laboratory ...

  10. Page 8, Benefit Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Form - 853 Kb - Allows an employee to enroll or waive health insurance coverage. SF-2817 - Life Insurance Election Form (Federal Employee Group Life Insurance) - 120 Kb - ...

  11. Form OE-417

    U.S. Energy Information Administration (EIA) (indexed site)

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  12. Montana Joint Application for Proposed Work in Montana's Streams...

    Open Energy Information (Open El) [EERE & EIA]

    Notice Form Topic JOINT APPLICATION FOR PROPOSED WORK IN MONTANA'S STREAMS, WETLANDS, FLOODPLAINS, AND OTHER WATER BODIES Organization Montana Department of Natural...

  13. Hawaii Application for Surface Water Use Permit for Proposed...

    Open Energy Information (Open El) [EERE & EIA]

    for Proposed New Use in a Designated Surface Water Management Area (DLNR Form SWUPA-N) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Hawaii...

  14. Form:SampleForm | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    SampleForm Jump to: navigation, search Input the name of a Test Page below. If the resource already exists, you will be able to edit its information. AddEdit a Test Page The text...

  15. ARM - Funded Research Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    govScienceFunded Research Proposals Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Funded Research

  16. Proposed Rules IV. Conclusion

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    686 Federal Register / Vol. 81, No. 44 / Monday, March 7, 2016 / Proposed Rules IV. Conclusion For the reasons cited in this document, the NRC is denying PRM- 50-106. The NRC is denying this petition because the current regulations already address environmental qualification in both mild and design basis event conditions of electrical equipment located both inside and outside of the containment building that is important to safety, and the petitioners did not provide significant new or

  17. Environmental Assessment - Proposed Actions

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    availability of Waste Isolation Pilot Plant (WIPP) facilities and infrastructure to scientists who wish to conduct experiments there. DOE would allow these experiments if they can be conducted without interfering with the WIPP's primary transuranic waste disposal mission and if they reflect contemporary budget priorities. This fact sheet presents questions and answers about the proposed action and its alternative. The deep geologic repository at the WIPP could provide a favorable environment for

  18. SPPR Group Proposal

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Doe Office of Indian Energy Tribal Leader Forum Leveraging Renewable Resources to Support Military Energy May 30 - 31, 2013 Phoenix, AZ Penny Casey Western Area Power Administration Presentation Overview  Power Marketing Administrations  Overview of Western Area Power Administration  Renewable Resources for Federal Agencies Program  Assisting Tribes with Renewable Energy Development 2 Power Marketing Administrations  Federal agencies formed under the Department of Energy

  19. Evaluation of proposed panel closure modifications at WIPP

    SciTech Connect (OSTI)

    Allen, Lawrence E.; Silva, Matthew K.; Channell, James K.; Abel, John F.; Morgan, Dudley R.

    2001-12-31

    A key component in the design of the WIPP repository is the installation of concrete structures as panel seals in the intake and exhaust drifts after a panel has been filled with waste containers. As noted in the EPA final rule, the panel seal closure system is intended to block brine flow between the waste panels at the WIPP. On April 17, 2001, the DOE proposed seven modifications to the EPA concerning the design of the panel closure system. EPA approval of these modifications is necessary since the details of the panel design are specified in EPA’s final rule as a condition for WIPP certification. However, the EPA has not determined whether a rulemaking would be required for these proposed design modifications. On September 4, 2001, the DOE withdrew the request, noting that it would be resubmitted on a future date. The Environmental Evaluation Group (EEG) contracted with two engineers, Dr. John Abel and Dr. Rusty Morgan, to evaluate the proposed modifications. The EEG has accepted the conclusions and recommendations from these two experts: 1) replacement of Salado Mass Concrete with a generic salt-based concrete; 2) replacement of the explosion wall with a construction wall; 3) replacement of freshwater grouting with salt-based grouting; 4) option to allow surface or underground mixing; and 5) option to allow up to one year for completion of closure. The proposed modification to allow local carbonate river rock as aggregate is acceptable pending demonstration that no problems will exist in the resulting concrete. The proposed modification to give the contractor discretion in removal of steel forms is not supported. Instead, several recommendations are made to specifically reduce the number of forms left, thereby reducing potential migration pathways.

  20. FOIA Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DOEID Home > FOIA > FOIA Request Form U.S. Department of Energy Idaho (DOE-ID) Operations Office Electronic FOIA Request Form* To make an Electronic FOIA (E-FOIA) request, please...

  1. Standard Form 120

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    1 OF STANDARD FORM 120 REV. APRIL 1957 GEN. SERV. ADMIN. FPMR (41 CFR) 101-43.311 ... NUMBER FAIR % ITEM DESCRIPTION PER UNIT TOTAL NO. (a) (b) (f) (g) STANDARD FORM 120 REV. ...

  2. DVU Training News Form

    Energy.gov (indexed) [DOE]

    Training News Form Please complete this form in its entirety and email to ... For Web Team Only NODE DOE F 360.9 (092014) Guidance for Posting to "Training News" ...

  3. Form OE-417

    U.S. Energy Information Administration (EIA) (indexed site)

    | U.S. Department of Energy Electricity Delivery and Energy Reliability Form OE-417|ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT|Form Approved OMB No. 1901-0288 Approval...

  4. ARM - Ingest Readiness Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    FormsIngest Readiness Form Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Ingest Readiness

  5. ORSSAB Membership Application Form

    Energy.gov [DOE]

    Resident interested in joining the Oak Ridge Site Specific Advisory Board should complete and submit the included form.

  6. OCPR Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OCPR Forms OCPR Forms Technology Transfer Reporting Form Agreement to Mediate Form Instructions: Fill out the form and e-mail the completed document to Office of Conflict ...

  7. Method for forming ammonia

    DOE Patents [OSTI]

    Kong, Peter C.; Pink, Robert J.; Zuck, Larry D.

    2008-08-19

    A method for forming ammonia is disclosed and which includes the steps of forming a plasma; providing a source of metal particles, and supplying the metal particles to the plasma to form metal nitride particles; and providing a substance, and reacting the metal nitride particles with the substance to produce ammonia, and an oxide byproduct.

  8. Paperwork Reductin Act Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PAPERWORK REDUCTION ACT COLLECTION DISCONTINUATION FORM Agency/Subagency OMB Control Number __ __ __ __ - __ __ __ __ Title of Collection: Current Expiration Date Month/Year Requested Expiration Date to Discontinue Collection Month/Year Reason for Discontinuation: Signature of Senior Official or Designee: Date: For OIRA Use ________________________ ________________________ OMB FORM 83-D, 10/04 Reset Form

  9. DOE's Proposed Coverage Determination for Set-Top Boxes | Department...

    Energy.gov (indexed) [DOE]

    On November 29, 2011, William Check of the National Cable & Telecommunications Association ("NCTA"),1 Paul Glist of the law firm of Davis Wright Tremaine LLP, and I met with Daniel ...

  10. A Proposed Methodology to Determine the Leverage Impacts of Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... of the program's fiscal year 2006 budget" * Our program's ... Schexnayder, February, 2002. 7 See Weatherization ... leverage) the more justification for claims of ...

  11. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J.; Burch, Joseph V.

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  12. Application of laser fluorimetry for determining the influence of a single amino-acid substitution on the individual photophysical parameters of a fluorescent form of a fluorescent protein mRFP1

    SciTech Connect (OSTI)

    Banishev, A A; Vrzheshch, E P; Shirshin, E A

    2009-03-31

    Individual photophysical parameters of the chromophore of a fluorescent protein mRFP1 and its two mutants (amino-acid substitution at position 66 - mRFP1/ Q66C and mRFP1/Q66S proteins) are determined. For this purpose, apart from conventional methods of fluorimetry and spectrophotometry, nonlinear laser fluorimetry is used. It is shown that the individual extinction coefficients of the chromophore of proteins correlate (correlation coefficient above 0.9) with the volume of the substituted amino-acid residue at position 66 (similar to the positions of the absorption, fluorescence excitation and emission maxima). (laser biology and medicine)

  13. Proposal Types | Advanced Photon Source

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    from anywhere in the world to use the APS through a competitive access process. CAT Member and Staff Proposals Proposals from members and staff of Collaborative Access...

  14. ATF2 Proposal

    SciTech Connect (OSTI)

    Grishanov, Boris Ivanovich; Logachev, Pavel; Podgorny, Fedor; Telnov, Valery; Angal-Kalinin, Deepa; Appleby, Robert; Jones, James; Kalinin, Alexander; Napoly, Olivier; Payet, Jacques; Braun, Hans-Heinrich; Schulte, Daniel; Zimmermann, Frank; Barlow, Roger; Bailey, Ian; Jenner, Leo; Jones, Roger; Kourevlev, German; Walker, Nick; Takahasi, Tohru; Gao, Jie; /Beijing, Inst. High Energy Phys. /Oxford U. /KEK, Tsukuba /Kyoto U., Inst. Chem. Res. /Orsay, LAL /LBL, Berkeley /LLNL, Livermore /University Coll. London /Chiba, Natl. Inst. Rad. Sci. /North Carolina A-T State U. /Oregon U. /Pohang Accelerator Lab. /Queen Mary, U. of London /SLAC /Tokyo U.

    2005-08-23

    This document is the first of two volumes describing the ATF2 project. The present volume discusses the technical justification for ATF2 and presents a design description. Since the International Committee for Future Accelerator (ICFA) decision on the choice of technology, a world-wide collaboration on the design of the International Linear Collider (ILC) has rapidly progressed [1]. The formation of the Global Design Effort (GDE) will accelerate the work towards a final design. An important technical challenge is obviously the high gradient acceleration but what is similarly challenging is the collision of extremely small beams of a few nanometer size. The latter challenge has three distinct issues: creating small emittance beams, preserving the emittance during acceleration and transport, and focusing the beams to nanometers. Most studies have been done using computer simulations but many issues still remain that require experimental verification. Accelerator Test Facility (ATF) at KEK was built to create small emittance beams, and succeeded in obtaining an emittance that almost satisfies the ILC requirements [2]. In this proposal we present a project, ATF2, which addresses the focusing of the beam into a nanometer spot. The ATF2 project will extend the extraction beamline of the ATF with an ILC-type final focus system to create a tightly focused, stable beam by making use of the small emittance of the ATF. The layout is shown in Figure 1.1. In the longer term, the ATF2 project would also provide invaluable input for the CLIC design of a future multi-TeV collider.

  15. Adoption Assistance Claim Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Certification for Reimbursement Complete all information in this section (child's name, birth date, date child was placed in the employee's home). Send form to the address...

  16. User Financial Account Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  17. User Financial Account Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    102115 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  18. Procurement Forms | NREL

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    RFPs relating to construction projects require additional documentation and are located in the "Construction Specific Forms" tab. Representations and Certifications Representations ...

  19. Benefits Forms & Required Notices

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contributions, 3027 (pdf) Universal Beneficiary Designation Change Form, 1938 (pdf) Notices Health Insurance Marketplace Coverage (pdf) HIPAA Special Enrollment Rights Notice (pdf

  20. Product Information Form

    Energy.gov [DOE]

    When planning to present a new product to the EERE Product Governance Team, complete this product information form and email it to ee.communications@ee.doe.gov.

  1. OFFSITE USE FORM

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    OFFSITE USE FORM Fill form out in triplicate, send original to Property Control, m/s 85A, give a copy to the Gate Guard and keep a copy for your files. This form needs to be updated once a year. Stanford Linear Accelerator Center Authorization Record Form: Stanford University Removal of Government Property from SLAC PO Box 4349 premises for Official Use Elsewhere (*) Date: To: Property Control, m/s 85A From: Name E Mail Address Group and Mail Stop SLAC Extension This is to notify you that I have

  2. SGP Shipment Notification Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    PlainsShipment Notification Form SGP Related Links Virtual Tour Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric...

  3. Proposal Preparedness | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposal Preparedness Proposal Preparedness Presented at the 15th Annual DOE Small Business Forum & Expo by: Tan Wilson, PMP, President of Entellect, LLC Proposal Preparedness (6.08 MB) More Documents & Publications Bid Decision Gate Reviews Writing Winning Proposals Procuring and Implementing Solar Projects on Public Buildings: How to Avoid Common Pitfalls

  4. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  5. Paperwork Reduction Act Forms

    Office of Energy Efficiency and Renewable Energy (EERE)

    You may need to fill out one or several of these forms depending on the nature of your survey or usability project. See the Paperwork Reduction Act Web page for more information about the process. Contact the Web Usability Coordinator if you have questions about which forms to complete.

  6. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Smartt, Herschel B.; Miller, Karen S.

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  7. Energy Signatures: a proposed new design tool

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1986-04-01

    Energy Signatures is a proposed new technique for aiding a designer in selecting and sizing passive solar elements on a building. Hourly heat flux profiles for each candidate design element are determined. These profiles are then matched to the hourly energy requirement of the space accounting for weather conditions, internal heat profiles of the space, and the mass characteristics of the building. Simulation analysis techniques are used to determine the Energy Signatures, the load profiles, and check the final result. Least-squares techniques are used to determine the optimum mix of strategies. Examples are given to illustrate development of the method up to the present. Future directions and possibilities are outlined.

  8. ORPS Facility Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ORPS FACILITY REGISTRATION FORM Submit completed form to: U.S. Department of Energy AU User Support EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 Note:  Only one facility per form  Type or print all entries 1. TYPE OF CHANGE  Add a Facility (Complete Section 1.A, then go to Section 2)  Change a Facility (Complete Section 1.B, then go to Section)  Delete a Facility (Complete Section 1.C, then go to Section 2) A. Add a New Facility Use this section if you are

  9. Supplier, Vendor Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Supplier, Vendor Forms Supplier, Vendor Forms As a premier national research and development laboratory, LANL seeks to do business with qualified companies that offer value and high quality products and services. Contact Small Business Office (505) 667-4419 Email Form No. Name Revision# Revised Date 3500.00.0059 Certification Regarding Former LANS or UC Employees (doc) 0 7/31/2015 3191.00.0993 Small Business Subcontracting Plan (doc) 1 7/9/2015 3251.00.0200 BAA Domestic Construction Materials

  10. Montana MPDES General Information Form (MDEQ Form 1) | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    (MDEQ Form 1) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Montana MPDES General Information Form (MDEQ Form 1) Abstract Completion of form allows...

  11. STANDARD FORM NO. 64

    Office of Legacy Management (LM)

    qz-5 STANDARD FORM NO. 64 rl . . .' . , G Ojice Memoawl crl LA STATES GOVER pi,+ ip; ; (' , TO : F. M . Belmore, M remtor, Produution Division DATE: Deomnber FROM : R. F. Van Wy ...

  12. Image forming apparatus

    DOE Patents [OSTI]

    Satoh, Hisao (Hachioji, JP); Haneda, Satoshi (Hachioji, JP); Ikeda, Tadayoshi (Hachioji, JP); Morita, Shizuo (Hachioji, JP); Fukuchi, Masakazu (Hachioji, JP)

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  13. Forming the Future

    Energy.gov (indexed) [DOE]

    ... At the tip of the stylus is a traditional quench-and-tempered 52100 steel ball bearing. Ford uses all types of hardened steel styluses of different diameter balls for forming ...

  14. NEPA Determination Complete

    Energy.gov [DOE]

    DOE has determined that this proposed project is a major Federal action that may significantly affect the quality of the human environment. To comply with the National Environmental Policy Act ...

  15. Evaluation Criteria for PDIL Proposal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposed Technical Plan (30%) * Technology impact with industry and likelihood of success. ... the Proposer and NREL can rapidly overcome R&D hurdles and risk while using the PDIL. 2. ...

  16. User Financial Account Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  17. Compute Reservation Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Compute Reservation Request Form Compute Reservation Request Form Users can request a scheduled reservation of machine resources if their jobs have special needs that cannot be accommodated through the regular batch system. A reservation brings some portion of the machine to a specific user or project for an agreed upon duration. Typically this is used for interactive debugging at scale or real time processing linked to some experiment or event. It is not intended to be used to guarantee fast

  18. LAMPF: proposal status and summaries

    SciTech Connect (OSTI)

    Rayburn, L.; Talley, B.

    1982-03-01

    Revisions and additions are given for LAMPF proposal summaries and status reports. These apply to LA-7444-MS. (GHT)

  19. Methods for forming particles

    DOE Patents [OSTI]

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  20. Proposal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    More MiniBooNE Antineutrino Data Taking The MiniBooNE Collaboration (Dated: February 4, ... However, the low-energy excess is presently unexplained. Additional antineutrino data and ...

  1. ARM - VAP Suggestion Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July l-September 30, 2015 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or

  2. Realtime Queue Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Realtime Queue Request Form Realtime Queue Request Form NERSC now supports realtime queues on Cori and Edison. Users can request a small number of on-demand nodes if their jobs have special needs that cannot be accommodated through the regular batch system. The real-time queue enables immediate access to a set of nodes, for jobs that are under the realtime wallclock limit (currently 6 hours). Typically this is used for real time processing linked to some experiment or event. It is not intended

  3. ORPS User Registration Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ENERGY OPERATIONAL EVENT INFORMATION SYSTEMS REGISTRATION FORM User Registration For:  ORPS Submit Completed Form To: EMAIL: ORPSsupport@hq.doe.gov PHONE: 800-473-4375 FAX: 301-903-9823 U.S. Department of Energy AU User Support (Type or Print) 1. Name Birth date / (Last) (First) (Middle Initial) (Month) (Day) 2.JobTitle 3. Company Name 4. Address Mail Stop City State Zip 5. Work Phone Work Fax 6. Internet E-Mail Address (e.g. orpssupport@hq.doe.gov 7. USA Citizenship (check one)  Yes 

  4. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    U.S. DOE Set-Top Box Proceeding U.S. DOE Set-Top Box Proceeding AT&T's U-verse® receivers should not be regulated under EPCA. U-verse® receivers are already among the most energy efficient of the major video service providers, and AT&T continues to work to increase their efficiency. DOE_03_07_2012.pdf (824.65 KB) More Documents & Publications Meeting Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Demonstration of

  5. Categorical Exclusion Determination Form Project Title: Program or Program Office:

    Office of Environmental Management (EM)

    Environmental Excellence | Department of Energy Receives New Mexico's Silver Award for Environmental Excellence Carlsbad Field Office Receives New Mexico's Silver Award for Environmental Excellence August 1, 2012 - 12:00pm Addthis DOE Carlsbad Field Office Deputy Manager Ed Ziemianski presents a Waste Isolation Pilot Plant (WIPP) team with the Green Zia Program Silver Level Leader award from the New Mexico Environment Department earlier this month in recognition of environmental initiatives.

  6. Categorical Exclusion Determination Form Project Title: Program or Program Office:

    Office of Environmental Management (EM)

    A radiation mapping dosimeter will be placed in a shielded cell in 773-A E-wing Shielded Cell Operations (SCO) facility for in-cell exposure to ambient radiation. Either the RadBall or GrayQb technologies will be selected for deployment; details of these two radiation mapping technologies are discussed below. --The RadBall consists of an inner spherical core made of a radiation sensitive polymer and an outer tungsten based collimation sheath. --The GrayQb is a alternate type of radiation mapping

  7. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    U.S . DEP ARTMENT OF ENERGY CONTRACT AND P ROJ ECT MANAGEMENT ROOT CAUSE ANALYSIS AND CORRECTIVE ACTION P LAN CLOSURE REPORT FINAL FEBRUARY 2011 iii Executive Summary The Department of Energy (DOE) is committed to making continuous improvements in contract and project management performance. Improving DOE contract and project management is a top priority of the Department's senior management and entire organization. While DOE's contract and project management has been on the Government

  8. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    Operation of the XRF (X-ray Fluorescence) Laboratory (773A C142/146) Savannah River Site Aiken/Aiken/South Carolina Operations in the X-ray Fluorescence (XRF) laboratory consists of the following activities: wavelength dispersive xrf analysis, clean particle size analyzer, glass disk apparatus for preparing samples for xrf analysis, grinder/polisher instrument, mills, and various furnaces. B3.6 - Small-scale research and development, laboratory operations, and pilot projects Andrew R. Grainger

  9. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    Fabrication/Maintenance Shop and Environmental Test Activities in the SRNL Nonproliferation Technologies Section Engineering Labo Savannah River Site Aiken/Aiken/South Carolina Hands-on activities covering the fabrication and assembly of equipment and systems designed by the NTS Engineering laboratory for WFO customers and NTS researchers; activities also include the maintenance and testing of equipment for WFO customers. B3.6 - Small-scale research and development, laboratory operations, and

  10. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    Replacement of A-Area Critical Fire Hydrants 3001, 3013, 3018, & 3032. Savannah River Site Aiken/Aiken/South Carolina The attached scope of work describes the installation of a new 6" resilient seat curb box gate valves and the replacement of existing fire hydrants connected to the outside underground (OSUG) fire water system in the A-Area. B1.3 - Routine maintenance Andrew R. Grainger Digitally signed by Andrew R. Grainger DN: cn=Andrew R. Grainger, o=DOE-SR, ou=EQMD,

  11. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    H Tank Farm (HTF) Blend and Feed Tank Modification Savannah River Site Aiken/Aiken/South Carolina H Tank Farm must be modified and realigned in order to provide feed to the Salt Waste Processing Facility (SWPF). The Engineering, Procurement, and Construction (EPC) Contractor (EPC) shall provide waste transfer line (WTL) connections to the SWPF process building. New transfer lines will be required to connect the SWPF to the existing Liquid Waste Transfer System for waste feed receipt from the

  12. U.S. Department of Energy Categorical Exclusion Determination Form

    Office of Environmental Management (EM)

    Attenuation-based Sampling for I129 and Tc99 Along Fourmile Branch at the F-Area Seepage Basins Savannah River Site Aiken/Aiken/South Carolina SRNL is conducting an attenuation-based sampling for I129 and Tc99 along Fourmile Branch down-gradient from the F-Area Seepage Basins as part of the Department of Energy EM-12 Office of Soil and Groundwater Remediation "Attenuation-Based Remedies for the Subsurface Applied Field Research Initiative (ABRS AFRI)". Groundwater sampling will be

  13. Categorical ExclusIon DetermInation Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA IS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  14. Categorical ExclusIon DetermInation Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    exercises and simulation 8B 1.3 * Routine maintenance and custodial services DB 1.4 * Air conditioning installation for existing equipment DB I.S - Cooling water system...

  15. U.S. Department of Energy Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Department of Energy Grant for the City of Carlsbad Improvement of the Double Eagle Well Field Carlsbad Field Office Carlsbad, Eddy and Lea Counties, NM The City of Carlsbad owns and operates two separate ground water well fields that serve a broad range of users including residential, industrial, commercial, and agricultural customers. The Sheeps Draw Well Field currently serves as the primary source of water for the City, however the City is seeking to expand the Double Eagle system to offset

  16. U.S. Department of Energy Categorical Exclusion Determination Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Routine replacement of High Efficiency Particulate Air (HEPA) Filters Carlsbad Field Office Carlsbad, Eddy County, New Mexico Removal of High Efficiency Particulate Air (HEPA) filters designated as low-level waste resulting from air filtration of waste handling operations and mining operations at the WIPP facility, for off-site treatment and disposal at a private facility authorized to manage that waste. B1.3 - Routine maintenance 09/11/2012 Susan E. McCauslin Digitally signed by Susan E.

  17. Forms | Princeton Plasma Physics Lab

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms Forms Computer Keyboard Keyboard DOE Forms DOE's forms are developed within the Department and approved by the DOE Forms Manager. The forms provided (below) are designed to serve the needs of two (or more) DOE Headquarters or field organizations. (You must have Adobe Acrobat(R) Reader to view and print the below files. Fillable forms are identified by the "fillable" icon, and require the full version of Adobe Acrobat software.) Forms by Subject Forms by Number Management &

  18. Coach Compliance Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Coach Compliance Form My team is participating in theNational Renewable Energy Laboratory's Lithium-Ion Battery Car Competition. I have reviewed the following documents with the participating students: o Safety Hazards of Batteries o Material Safety Data Sheet - Lithium Polymer Battery o Electric Battery Car Competition Rules ______________________________ ______________ Coach Signature Date Name of School: ____________________________________________ Name of Coach (Please Print):

  19. Inelastic Scattering Form Factors

    Energy Science and Technology Software Center (OSTI)

    1992-01-01

    ATHENA-IV computes form factors for inelastic scattering calculations, using single-particle wave functions that are eigenstates of motion in either a Woods-Saxon potential well or a harmonic oscillator well. Two-body forces of Gauss, Coulomb, Yukawa, and a sum of cut-off Yukawa radial dependences are available.

  20. Method for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1979-01-01

    Method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  1. Apparatus for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L.

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  2. Formed photovoltaic module busbars

    SciTech Connect (OSTI)

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  3. Formed HIP Can Processing

    SciTech Connect (OSTI)

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  4. FOIA Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Southwestern Power Administration To make an FOIA request, please provide the information below. Failure to enter accurate and complete information may render your FOIA request impossible to fulfill. * Requests submitted under the Privacy Act must be signed and, therefore, cannot be submitted on this form. Contact Information Name Organization Address Fax Number Phone Number Email Address Reasonably Describe Records Describe the specific record (s) you seek with sufficient detail that a

  5. Baseline Change Proposal (BCP) ESAAB and PMRC Brief Template | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Baseline Change Proposal (BCP) ESAAB and PMRC Brief Template Baseline Change Proposal (BCP) ESAAB and PMRC Brief Template Template for briefing Baseline Change Proposals to the ESAAB and/or PMRC July 2015 Template (579 KB) Key Resources Internal DOE Tools PMCDP EVMS PARS IIe FPD Resource Center PM Newsletter Forms and Templates More Documents & Publications Critical Decision 2 (CD-2) ESAAB and PMRC Brief Template DOE Project Management Risk Committee (PMRC) SOP ESAAB Standard

  6. Nucleon Electromagnetic Form Factors

    SciTech Connect (OSTI)

    Kees de Jager

    2004-08-01

    Although nucleons account for nearly all the visible mass in the universe, they have a complicated structure that is still incompletely understood. The first indication that nucleons have an internal structure, was the measurement of the proton magnetic moment by Frisch and Stern (1933) which revealed a large deviation from the value expected for a point-like Dirac particle. The investigation of the spatial structure of the nucleon, resulting in the first quantitative measurement of the proton charge radius, was initiated by the HEPL (Stanford) experiments in the 1950s, for which Hofstadter was awarded the 1961 Nobel prize. The first indication of a non-zero neutron charge distribution was obtained by scattering thermal neutrons off atomic electrons. The recent revival of its experimental study through the operational implementation of novel instrumentation has instigated a strong theoretical interest. Nucleon electro-magnetic form factors (EMFFs) are optimally studied through the exchange of a virtual photon, in elastic electron-nucleon scattering. The momentum transferred to the nucleon by the virtual photon can be selected to probe different scales of the nucleon, from integral properties such as the charge radius to scaling properties of its internal constituents. Polarization instrumentation, polarized beams and targets, and the measurement of the polarization of the recoiling nucleon have been essential in the accurate separation of the charge and magnetic form factors and in studies of the elusive neutron charge form factor.

  7. CERAMIC WASTE FORM DATA PACKAGE

    SciTech Connect (OSTI)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  8. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed...

    Energy.gov (indexed) [DOE]

    the notice of proposed rulemaking for a test procedure for set-top boxes and the ... The Energy Department also retains its authority to test set-top boxes under the ENERGY ...

  9. downloadForm.asp

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DE-DT0010963 PAGE NO (a) (b) (c) (d) (e) (f) (g) DE-EM0003586/0455/15/501866/01 Period of Performance: 03/15/2016 to 03/14/2017 00001 Task 1 - LANL Land Conveyance and Transfers 121,845.38 2016 Line item value is:$121,845.38 Incrementally Funded Amount: $121,845.38 Prescribed by GSA FAR (48 CFR) 53.213(f) OPTIONAL FORM 348 (Rev. 4/2006) AUTHORIZED FOR LOCAL REPODUCTION PREVIOUS EDITION NOT USABLE TOTAL CARRIED FORWARD TO 1ST PAGE (ITEM 17(H)) $121,845.38 Contract DE-EM0003586 Task Order

  10. GlassForm

    Energy Science and Technology Software Center (OSTI)

    2011-09-16

    GlassForm is a software tool for generating preliminary waste glass formulas for a given waste stream. The software is useful because it reduces the number of verification melts required to develop a suitable additive composition. The software includes property models that calculate glass properties of interest from the chemical composition of the waste glass. The software includes property models for glass viscosity, electrical conductivity, glass transition temperature, and leach resistance as measured by the 7-daymore » product consistency test (PCT).« less

  11. Original Workshop Proposal and Description

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Notes for Vis Requirements » Original Workshop Proposal and Description Original Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held 
at the Berkeley Marina Radisson Hotel,
Berkeley, California, June 5, 2002
(date and location are tenative) Workshop Co-organizers: Bernd Hamann 
University of California-Davis Lawrence Berkeley Nat'l Lab. E. Wes Bethel 
Lawrence Berkeley Nat'l Lab.

  12. DOCUMENT RELEASE FORM

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DNS Policies & Procedures DNS Policies & Procedures DNS Policy Every Federal agency must use only .gov, .mil, or Fed.us domains unless the agency head explicitly determines another domain is necessary for the proper performance of an agency function. Why is this important? Visitors looking for official government information must be confident that is what they are getting. Many websites exist that resemble government websites or that appear to provide "official" government

  13. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  14. Fermilab | Fermilab at Work | Web Form | Feedback Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feedback Form Use the form below to submit a suggestion to senior management. Required fields are marked with an asterisk (*). Suggestion: Name: Email Address: Submit Last modified...

  15. Form 1 | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Form 1 Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Form 1Legal Abstract Form 1: General Information,...

  16. HDOT Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    HDOT Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: HDOT FormsLegal Abstract The State of Hawaii Forms Central webpage...

  17. Radiation Safety Work Control Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Radiation Safety Work Control Form (see instructions on pg-3) Rev. May 2014 Area: Form : ... Safety Office (namesignaturedate) Radiation Physics (namesignaturedate) Section 4: ...

  18. NDEP Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    to library Legal Document- OtherOther: NDEP FormsLegal Abstract The Nevada Division of Environmental Protection (NDEP) provides links various forms, including all necessary...

  19. Electronic Registration Form - Hanford Site

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Site Wide Programs Health & Safety Exposition Electronic Registration Form About Us Booth Awards Special Events Exhibitor Information What is EXPO Electronic Registration Form...

  20. Form 200 | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ApplicationPermit Application: Form 200Legal Abstract Form 200: ApplicationReport for Waste Discharge, current through August 14, 2014. Published NA Year Signed or Took Effect...

  1. Waste form product characteristics

    SciTech Connect (OSTI)

    Taylor, L.L.; Shikashio, R.

    1995-01-01

    The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

  2. Low-level-waste-form criteria

    SciTech Connect (OSTI)

    Barletta, R.E.; Davis, R.E.

    1982-01-01

    Efforts in five areas are reported: technical considerations for a high-integrity container for resin wastes; permissible radionuclide loadings for organic ion exchange resin wastes; technical factors affecting low-level waste form acceptance requirements of the proposed 10 CFR 61 and draft BTP; modeling of groundwater transport; and analysis of soils from low-level waste disposal sites (Barnwell, Hanford, and Sheffield). (DLC)

  3. Research Proposal Milestones | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposal Milestones Research Proposal Milestones Research Proposal Milestones, from the U.S. Department of Energy's Postdoctoral Research Awards program. templateformilestones.xl...

  4. Category:Proposed deletion | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    History Category:Proposed deletion Jump to: navigation, search This category contains articles which have been proposed for deletion. To tag an article for proposed deletion use...

  5. proposed surface and subsurface marker designs

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Images of proposed markers for the surface and subsurface Large Surface Marker - Proposed Design with Plaques of Text and Images Small Subsurface Marker - Proposed Design

  6. proposed surface and subsurface marker designs

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Images of proposed markers for the surface and subsurface Large Surface Marker - Proposed Design with Plaques of Text and Images Small Subsurface Marker - Proposed Design

  7. STEP Utility Data Release Form

    Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Method for hot press forming articles

    DOE Patents [OSTI]

    Baker, Robert R.; Hartsock, Dale L.

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  9. Field Work Proposal (FWP) Out-Of-Cycle | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Out-Of-Cycle Version Number: 0 Document Number: Form 58100.011 Effective Date: 04/2016 File (public): Microsoft Office document icon Form 58100.011 Rev 0 Field Work Proposal (FWP) Out-Of-Cycle

  10. NERSC Initiative for Scientific Exploration proposals due May 31

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    proposals due May 31 NERSC Initiative for Scientific Exploration proposals due May 31 May 2, 2011 by Francesca Verdier The deadline to apply for the second and final round of award decisions for the NERSC Initiative for Scientific Exploration (NISE) program is May 31, 2011. Award decisions will be announced by mid June. Details of NISE award and application form can be found at: NERSC Initiative for Scientific Exploration (NISE) Subscribe via RSS Subscribe Browse by Date October 2016 September

  11. Review Policy / Proposal Guidelines / Reporting Requirements...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Review Policy Proposal Guidelines Reporting Requirements High Energy Physics (HEP) HEP ... HEP Early Career Opportunities Review Policy Proposal Guidelines Reporting ...

  12. Solids mass flow determination

    DOE Patents [OSTI]

    Macko, Joseph E.

    1981-01-01

    Method and apparatus for determining the mass flow rate of solids mixed with a transport fluid to form a flowing mixture. A temperature differential is established between the solids and fluid. The temperature of the transport fluid prior to mixing, the temperature of the solids prior to mixing, and the equilibrium temperature of the mixture are monitored and correlated in a heat balance with the heat capacities of the solids and fluid to determine the solids mass flow rate.

  13. Comments on Supplemental Notice of Proposed Rulemaking for Alternative

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Efficiency Determination Methods and Test Procedures for Walk-In Coolers and Walk-In Freezers; Docket No. EERE-2011-BT-TP-0024 | Department of Energy Supplemental Notice of Proposed Rulemaking for Alternative Efficiency Determination Methods and Test Procedures for Walk-In Coolers and Walk-In Freezers; Docket No. EERE-2011-BT-TP-0024 Comments on Supplemental Notice of Proposed Rulemaking for Alternative Efficiency Determination Methods and Test Procedures for Walk-In Coolers and Walk-In

  14. Fire Protection Account Request Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fire Protection System Account Request Form To obtain a user id and password to access the Fire Protection system, please complete the form, save the file and email it to...

  15. SSRL Computer Account Request Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SSRL/LCLS Computer Account Request Form August 2009 Fill in this form and sign the security statement mentioned at the bottom of this page to obtain an account. Your Name: __________________________________________________________ Institution: ___________________________________________________________ Mailing Address: ______________________________________________________ Email Address: _______________________________________________________ Telephone:

  16. Fermilab | Tevatron | Guest Book | Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Guest Book - Form Share your Tevatron-related memories, comments and stories by using our submission form below: Submitted comments are restricted to 200 words and comments will be...

  17. Paperclips Etc. Special Order Form

    Energy.gov (indexed) [DOE]

    PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply...

  18. CSLB Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLB FormsLegal Abstract The Colorado State Land Board (CSLB) provides various...

  19. ADOT Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: ADOT FormsLegal Abstract The Arizona Department of Transportation provides...

  20. NDSL Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    NDSL Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: NDSL FormsLegal Abstract The Nevada Division of State Lands provides...

  1. CSLC Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: CSLC FormsLegal Abstract The California State Lands Commission (CSLC) provides...

  2. WSDNR Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Forms Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: WSDNR FormsLegal Abstract The Washington State Department of Natural Resources...

  3. HHS SMALL BUSINESS REVIEW FORM

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Form 4220.2 (Revised March 14 2013) Office of Small and Disadvantaged Business Utilization DOE F 4220.2 - Small Business Review Form (03142013) OSDBU Control Number: ...

  4. ESA Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    navigation, search OpenEI Reference LibraryAdd to library Web Site: ESA Forms Abstract Fish and Wildlife Service Fish and Wildlife Permit Application Forms Author U.S. Fish and...

  5. ATF2 Proposal Volume 2

    SciTech Connect (OSTI)

    Grishanov, B.I.; Logachev, P.; Podgorny, F.; Telnov, V.; Angal-Kalinin, D.; Jones, J.; Kalinin, A.; Napoly, O.; Payet, J.; Braun, H.H.; Schulte, D.; Zimmermann, F.; Appleby, R.; Barlow, R.; Bailey, I.; Jenner, L.; Jones, R.; Kourevlev, G.; Elsen, E.; Vogel, V.; Walker, N.; /DESY /Fermilab /Hiroshima U. /Beijing, Inst. High Energy Phys. /Oxford U. /Royal Holloway, U. of London /KEK, Tsukuba /Kyoto U., Inst. Chem. Res. /Orsay, LAL /Valencia U. /Annecy, LAPP /LBL, Berkeley /LLNL, Livermore /University Coll. London /Chiba, Natl. Inst. Rad. Sci. /North Carolina A-T State U. /Oregon U. /Pohang Accelerator Lab. /Queen Mary, U. of London /SLAC /Tokyo U.

    2006-02-27

    For achieving the high luminosity required at the International Linear Collider (ILC), it is critical to focus the beams to nanometer size with the ILC Beam Delivery System (BDS), and to maintain the beam collision with a nanometer-scale stability. To establish the technologies associated with this ultra-high precision beam handling, it has been proposed to implement an ILC-like final focus optics in an extension of the existing extraction beamline of ATF at KEK. The ATF is considered to be the best platform for this exercise, since it provides an adequate ultra-low emittance electron beam in a manner dedicated to the development of ILC. The two major goals for this facility, called ATF2, are: (A) Achievement of a 37 nm beam size, and (B) control of beam position down to 2 nm level. The scientific justification for the ATF2 project and its technical design have been described in Volume 1 of the ATF2 Proposal [1]. We present here Volume 2 of the ATF2 Proposal, in which we present specifics of the construction plans and the group organization to execute the research programs at ATF2. The sections in this report have been authored by relevant ATF2 subgroups within the International ATF Collaboration. The time line of the project is described in Section 2. Section 3 discuss the structure of the international collaboration. Sections 4 and 5 discuss budget considerations, which are presented as well as the design and construction tasks to be shared by the international collaboration at ATF2. Concluding remarks have been contributed by Dr. Ewan Paterson, Chair of the International Collaboration Board of the ATF collaboration.

  6. Benefit Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Employee Orientation » Benefit Forms Benefit Forms The employment and benefits forms that you will be asked to complete as part of this orientation program can be numerous. Each, however, serves an important purpose in ensuring proper recording of your employment and benefit elections. This online program is designed to make the task a little easier. Each set of forms that you will work with has been compiled to ensure that you are only completing the essential documentation for your

  7. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  8. Document Certification and Transmittal Form

    Energy.gov [DOE]

    Use this form to submit a NEPA document to the Office of NEPA Policy and Compliance for website posting.

  9. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  10. Secretary Chu Announces Determination of No Adverse Material...

    Energy Savers

    and market impact study for the proposed uranium transfer to fund accelerated cleanup ... The market review and determination confirms that the proposed transfer of uranium will ...

  11. Proposal Submittal and Scheduling Procedures for Macromolecular

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Crystallography | Stanford Synchrotron Radiation Lightsource Proposal Submittal and Scheduling Procedures for Macromolecular Crystallography Beam time for macromolecular crystallography projects is obtained by submitting an SSRL Macromolecular Crystallography Proposal. This proposal is peer reviewed by the Structural Molecular Biology and Biophysics subpanel of the SSRL Proposal Review Panel (PRP) for scientific merit and rating and for criticality of synchrotron radiation use. Proposal

  12. Hawaii Well Abandonment Report Form (DLNR Form WAR) | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Notice Form Topic Well Abandonment Report Organization State of Hawaii Commission on Water Resource Management Published Publisher Not Provided, 012008 DOI Not Provided Check...

  13. Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    must exist at the time the request is submitted. Orga nizati Pillsbury Winthrop Shaw Pi on Mailin g 909 Fannin Suite 2000 Addre 55 City Houston Enter description: 1. All...

  14. Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    completed 20 or more years of Reserve or National Guard service but will not receive a pension until age 60.) SF-181 Ethnicity and Race Identification Ethnicity and Race...

  15. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, Andrew M.

    1998-01-01

    An aspheric optical element formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin (.about.100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application.

  16. Forming aspheric optics by controlled deposition

    DOE Patents [OSTI]

    Hawryluk, A.M.

    1998-04-28

    An aspheric optical element is disclosed formed by depositing material onto a spherical surface of an optical element by controlled deposition to form an aspheric surface of desired shape. A reflecting surface, single or multi-layer, can then be formed on the aspheric surface by evaporative or sputtering techniques. Aspheric optical elements are suitable for deep ultra-violet (UV) and x-ray wavelengths. The reflecting surface may, for example, be a thin ({approx}100 nm) layer of aluminum, or in some cases the deposited modifying layer may function as the reflecting surface. For certain applications, multi-layer reflective surfaces may be utilized, such as chromium-carbon or tungsten-carbon multi-layer, with the number of layers and thickness being determined by the intended application. 4 figs.

  17. Proposal Review Panel | Stanford Synchrotron Radiation Lightsource

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposal Review Panel Submitting a proposal is the first step to access beam time at SSRL. Proposals are peer reviewed and rated by the SSRL Proposal Review Panel (PRP) on a scale from 1 (highest) to 5 (lowest). Peer reviewers evaluate proposals based on scientific merit, particularly the intellectual impact of the work on the field and the value of using synchrotron radiation to accomplish the proposed work. To ensure consistency in the review process, reviewers use the following rating

  18. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  19. Complaint Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Complaint Form Complaint Form The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. To submit an allegation to the OIG, complete the form below. Acknowledgement * I acknowledge that I have read the Office of Inspector General Hotline section of the OIG website regarding issues which should be reported to the OIG, complaint processing, anonymity and

  20. System for forming janus particles

    DOE Patents [OSTI]

    Hong, Liang; Jiang, Shan; Granick, Steve

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  1. Proposal Submittal and Scheduling Procedures for Macromolecular...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    This proposal is peer reviewed by the Structural Molecular Biology and Biophysics subpanel ... Once a complete proposal is received, it is sent to the Structural Molecular Biology and ...

  2. LOPP Proposal Checklist | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    of specific proposal requirements for lease of power privilege proposals. Author Bureau of Reclamation Published Department of Interior, 2015 DOI Not Provided Check for DOI...

  3. CX-010269: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-010269: Categorical Exclusion Determination Renewable Energy Initiatives for Clark ... The U.S. Department of Energy (DOE) is proposing to provide federal funding to the Clark ...

  4. CX-100686 Categorical Exclusion Determination | Department of...

    Energy Savers

    CX-100686 Categorical Exclusion Determination U.S. Photovoltaic Manufacturing ... DOE is proposing to provide federal funding to U.S. Photovoltaic Manufacturing Consortium ...

  5. CX-001627: Categorical Exclusion Determination | Department of...

    Office of Environmental Management (EM)

    CX-001627: Categorical Exclusion Determination Test Reactor Cask Implementation CX(s) ... This proposed action is a process and facility modification. The Advanced Test Reactor ...

  6. CX-100327 Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CX-100327 Categorical Exclusion Determination Proposed Rulemaking for Energy Conservation Standards for Commercial Water Heating Equipment RIN: 1904-AD34 CX(s)...

  7. Progress report and research proposal

    SciTech Connect (OSTI)

    1982-01-01

    Research carried out includes: interpretation of mean-free-paths of projectile fragments from relativistic heavy-ion collisions; inelastic excitation and spin-flip in heavy ion reactions; inelastic scattering and the optical potential for /sup 16/O + /sup 28/Si; elastic scattering of protons by /sup 6/Li; scattering of light ions by /sup 6/Li; specific distortion effects in /sup 3/H + ..cap alpha.. and /sup 3/He + ..cap alpha.. systems; specific distortion effects in the d + ..cap alpha.. system and charge form factor of /sup 6/Li; detailed investigation of exchange effects in /sup 3/He + ..cap alpha.. and ..cap alpha.. + /sup 16/O scattering; study of the n + /sup 6/Li system with flexible cluster wave function; core-exchange effects in like-ion scattering; reaction cross-section for collision of nuclei at high energy; study of /sup 46/ /sup 48/Ca(..cap alpha..,p) reactions; the proximity potential for heavy-ion reactions on deformed nuclei; quasi-bound state resonances for a particle in a two-dimensional well; time evolution kernels, uniform asymptotic expansions; and a generator coordinate theory of normalization kernels of cluster systems, application of Gel'fand polynomials to permutation and SU/sub 4/ symmetries of cluster wave functions. (GHT)

  8. Turbidimetric determination of the total glucozinolate content of rape

    SciTech Connect (OSTI)

    Kononova, R.V.; Chaika, I.K.; Levitskii, A.P.; Lucashenok, E.V.

    1986-03-01

    The objective of the investigation was to develop a procedure for the determination of the total GZ (glucozinolate--non-nurishing substances found in rapeseed) content from the content of sulfate ion SO/sup 2 -4/which is formed in the fermentative hydrolysis of GZ, based on the degree of turbidity formed by the addition of a barium chloride solution in the presence of the surfactant Tween-80 (poly(20)ethoxysorbitan monooleate.). The supernatant liquid is used to determine the SO/sup 2 -4 -/ion before and after fermentative hydrolysis. The GZ content of the analyzed sample of rapeseed raw material was calculated from an equation. Data show that the precision, reliability, and reproducibility of the results obtained by the proposed method are satisfactory. The procedure can be sued for serial analysis in selection establishments as well as feed production plants.

  9. Technology Transfer Reporting Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transfer Reporting Form Technology Transfer Reporting Form PDF icon Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

  10. SNL Information Repository subscription form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2015 SANDIA NATIONAL LABORATORIES HAZARDOUS WASTE INFORMATION REPOSITORY INDEX Subscription form for hard copy notices of updates Name: Address: City: State: Zip: Please check each topic for which you want to receive notices of updates. Public meeting notices Information repository updates Please mail completed form to: Anita Reiser Sandia National Laboratories PO Box 5800, MS 0729 Albuquerque NM 87185-0729

  11. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, R.B.; Claar, T.D.; Silkowski, P.

    1987-04-22

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  12. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B. (Glen Ellyn, IL); Claar, Terry D. (Newark, DE); Silkowski, Peter (Urbana, IL)

    1988-01-01

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  13. Method of forming ceramic bricks

    DOE Patents [OSTI]

    Poeppel, Roger B.; Claar, Terry D.; Silkowski, Peter

    1988-09-06

    A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

  14. Oregon Modification Application Geothermal Wells Form | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Modification Application Geothermal Wells Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Modification Application Geothermal Wells Form Form...

  15. TEPP - Exercise Evaluation Forms | Department of Energy

    Office of Environmental Management (EM)

    TEPP - Exercise Evaluation Forms TEPP - Exercise Evaluation Forms Hazardous Materials Exercise Evaluation Forms PDF icon Exercise Evaluation Forms More Documents & Publications...

  16. High-precision calculation of the strange nucleon electromagnetic form factors

    SciTech Connect (OSTI)

    Green, Jeremy; Meinel, Stefan; Engelhardt, Michael G.; Krieg, Stefan; Laeuchli, Jesse; Negele, John W.; Orginos, Kostas; Pochinsky, Andrew; Syritsyn, Sergey

    2015-08-26

    We report a direct lattice QCD calculation of the strange nucleon electromagnetic form factors GsE and GsM in the kinematic range 0 ≤ Q2 ≤ 1.2GeV2. For the first time, both GsE and GsM are shown to be nonzero with high significance. This work uses closer-to-physical lattice parameters than previous calculations, and achieves an unprecented statistical precision by implementing a recently proposed variance reduction technique called hierarchical probing. We perform model-independent fits of the form factor shapes using the z-expansion and determine the strange electric and magnetic radii and magnetic moment. As a result, we compare our results to parity-violating electron-proton scattering data and to other theoretical studies.

  17. Recommendation 191: ETTP contract proposal review

    Energy.gov [DOE]

    The ORSSAB offers recommendations Regarding the Request for Proposals for the East Tennessee Technology Park Contract.

  18. Proposal Submission | Linac Coherent Light Source

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Proposal Submission Check-In | Computer Accounts | Data Collection & Analysis | Policies | Schedules | Shipping | User Portal Submit new LCLS Proposals for PCS beamtime Run 15 by 4 PM PACIFIC January 19, 2017. LCLS PROPOSALS & PROPOSAL REVIEW PROCESS ( PROPOSAL REVIEW PANEL) Please note the following important information Since Run 13, LCLS has been running in a new mode of operation, called Standard Configuration Beam Time. Selected areas will operate for ~25% of Run 15 (possibly more

  19. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey; Anderson, Mark T.; Ganguli, Rahul; Lu, Yunfeng

    1999-01-01

    This invention comprises a method to form a family of supported films film with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts.

  20. Process to form mesostructured films

    DOE Patents [OSTI]

    Brinker, C.J.; Anderson, M.T.; Ganguli, R.; Lu, Y.F.

    1999-01-12

    This invention comprises a method to form a family of supported films with pore size in the approximate range 0.8-20 nm exhibiting highly ordered microstructures and porosity derived from an ordered micellar or liquid-crystalline organic-inorganic precursor structure that forms during film deposition. Optically transparent, 100-500-nm thick films exhibiting a unique range of microstructures and uni-modal pore sizes are formed in seconds in a continuous coating operation. Applications of these films include sensors, membranes, low dielectric constant interlayers, anti-reflective coatings, and optical hosts. 12 figs.

  1. Determining Price Reasonableness in Federal ESPCs

    SciTech Connect (OSTI)

    Shonder, J.A.

    2005-03-08

    This document reports the findings and implementation recommendations of the Price Reasonableness Working Group to the Federal ESPC Steering Committee. The working group was formed to address concerns of agencies and oversight organizations related to pricing and fair and reasonable price determination in federal energy savings performance contracts (ESPCs). This report comprises the working group's recommendations and is the proposed draft of a training curriculum on fair and reasonable price determination for users of federal ESPCs. The report includes: (1) A review of federal regulations applicable to determining price reasonableness of federal ESPCs (section 2), (2) Brief descriptions of the techniques described in Federal Acquisition Regulations (FAR) 15.404-1 and their applicability to ESPCs (section 3), and (3) Recommended strategies and procedures for cost-effectively completing price reasonableness determinations (sections 4). Agencies have struggled with fair and reasonable price determinations in their ESPCs primarily because this alternative financing vehicle is relatively new and relatively rare in the federal sector. The methods of determining price reasonableness most familiar to federal contracting officers (price competition based on the government's design and specifications, in particular) are generally not applicable to ESPCs. The regulatory requirements for determining price reasonableness in federal ESPCs have also been misunderstood, as federal procurement professionals who are inexperienced with ESPCs are further confused by multiple directives, including Executive Order 13123, which stresses life-cycle cost-effectiveness. Uncertainty about applicable regulations and inconsistent practice and documentation among agencies have fueled claims that price reasonableness determinations have not been sufficiently rigorous in federal ESPCs or that the prices paid in ESPCs are generally higher than the prices paid for similar goods and services

  2. FermiCulture Subscription Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    This is a private, announcement-only mail list and will never be used for spamming or discussions. Subscribers receive approximately five emails per month. Use the form below to ...

  3. NMOSE Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    library Legal Document- Permit ApplicationPermit Application: NMOSE FormsLegal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for...

  4. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, Hagan; Walker, Barbara J.; Chang, Chung-yu; Niblack, Brett; Panchal, Rekha

    1998-01-01

    An inactive pore-forming agent which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell.

  5. EIA-412 Form and Instructions

    Gasoline and Diesel Fuel Update

    METHOD OF FILING RESPONSE Submit your data electronically over the Internet using our web-based form. Log on to https:elecidc.eia.doe.gov Web-based Survey Information EIA uses ...

  6. FAQs for Survey Forms 914

    Gasoline and Diesel Fuel Update

    ... May the oil or gas volumes be submitted separately? Where are oil sales submitted (web or ... If you're using the web form there are comments you can select from the drop down list or ...

  7. Process for forming planarized films

    DOE Patents [OSTI]

    Pang, Stella W.; Horn, Mark W.

    1991-01-01

    A planarization process and apparatus which employs plasma-enhanced chemical vapor deposition (PECVD) to form plarnarization films of dielectric or conductive carbonaceous material on step-like substrates.

  8. 2006 Final Transmission Proposal: Revenue Requirements Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-06-01

    The purpose of the Revenue Requirement Study (Study) is to establish the level of revenues needed from rates for Bonneville Power Administration's (BPA's) transmission and ancillary services to recover, in accordance with sound business principles, costs associated with the transmission of electric power over the Federal Columbia River Transmission System (FCRTS). The FCRTS is part of the larger Federal Columbia River Power System (FCRPS) which also includes the hydroelectric, multipurpose facilities constructed and operated by the U.S. Army Corps of Engineers and the Bureau of Reclamation in the Pacific Northwest. The FCRPS costs that are not included in the FCRTS costs are funded and repaid through BPA power rates. The transmission revenue requirements herein include: recovery of the Federal investment in transmission and transmission-related assets; the operations and maintenance (O&M) and other annual expenses associated with the provision of transmission and ancillary services; the cost of generation inputs for ancillary services and other between business-line services necessary for the transmission of power; and all other transmission-related costs incurred by the Administrator. The cost evaluation period for this rate proposal includes Fiscal Years (FYs) 2005-2007, the period extending from the last year for which historical information is available through the proposed rate test period. The Study includes the transmission revenue requirements for the rate test period, FYs 2006-2007 (Rate Period) and the results of transmission repayment studies. This Study outlines the policies, forecasts, assumptions, and calculations used to determine BPA's transmission revenue requirements. Legal requirements are summarized in Chapter 5 of this Study. The Revenue Requirement Study Documentation (Documentation), TR-06-FS-BPA-01A, contains key technical assumptions and calculations, the results of the transmission repayment studies, and a further explanation of the

  9. SSRL User Financial Account Form

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    07/25/16 SSRL User Financial Account Form Establish an SSRL user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities or to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of

  10. Methods of forming hardened surfaces

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID)

    2004-07-27

    The invention encompasses a method of forming a metallic coating. A metallic glass coating is formed over a metallic substrate. After formation of the coating, at least a portion of the metallic glass can be converted into a crystalline material having a nanocrystalline grain size. The invention also encompasses metallic coatings comprising metallic glass. Additionally, the invention encompasses metallic coatings comprising crystalline metallic material, with at least some of the crystalline metallic material having a nanocrystalline grain size.

  11. Method for forming metal contacts

    DOE Patents [OSTI]

    Reddington, Erik; Sutter, Thomas C; Bu, Lujia; Cannon, Alexandra; Habas, Susan E; Curtis, Calvin J; Miedaner, Alexander; Ginley, David S; Van Hest, Marinus Franciscus Antonius Maria

    2013-09-17

    Methods of forming metal contacts with metal inks in the manufacture of photovoltaic devices are disclosed. The metal inks are selectively deposited on semiconductor coatings by inkjet and aerosol apparatus. The composite is heated to selective temperatures where the metal inks burn through the coating to form an electrical contact with the semiconductor. Metal layers are then deposited on the electrical contacts by light induced or light assisted plating.

  12. Chevron, GE form Technology Alliance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. February 3, 2014 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los

  13. Supplier Information Form | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Supplier Information Form PDF icon SB_SIF_form_Rev_0110

  14. LBNL Affiliate Forms - 88-Inch Cyclotron

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    New Users‎ > ‎ LBNL Affiliate Forms Affiliate Forms (click here to open pdf)

  15. Utah Antidegradation Review Form | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Utah Antidegradation Review Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Utah Antidegradation Review Form Form Type ApplicationNotice Form Topic...

  16. Paperwork Reduction Act Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Paperwork Reduction Act Form Paperwork Reduction Act Form Collection Discontinuation Form Paperwork Reduction Act Form (17.93 KB) More Documents & Publications OMB83 D Discontinuance Form OMB 83 C Paperwork Reduction Act Submission (OMB 83-I)

  17. DOE - NNSA/NFO -- Request Forms

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Forms Click the links below to view the form. Complete the form by filling-out the form fields online and ...

  18. Recommendations on the proposed Monitored Retrievable Storage Facility

    SciTech Connect (OSTI)

    Not Available

    1985-10-01

    Following the Department of Energy's announcement in April 1985 that three Tennessee sites were to be considered for the Monitored Retrievable Storage facility, Governor Lamar Alexander initiated a review of the proposal to be coordinated by his Safe Growth Team. Roane County and the City of Oak Ridge, the local governments sharing jurisdiction over DOE's primary and secondary sites, were invited to participate in the state's review of the MRS proposal. Many issues related to the proposed MRS are being considered by the Governor's Safe Growth Team. The primary objective of the Clinch River MRS Task Force has been to determine whether the proposed Monitored Retrievable Storage facility should be accepted by the local governments, and if so, under what conditions. The Clinch River MRS Task Force is organized into an Executive Committee cochaired by the Roane County Executive and Mayor of Oak Ridge and three Study Groups focusing on environmental (including health and safety), socioeconomic, and transportation issues.

  19. Comparative assessment of TRU waste forms and processes. Volume I. Waste form and process evaluations

    SciTech Connect (OSTI)

    Ross, W.A.; Lokken, R.O.; May, R.P.; Roberts, F.P.; Timmerman, C.L.; Treat, R.L.; Westsik, J.H. Jr.

    1982-09-01

    This study provides an assesses seven waste forms and eight processes for immobilizing transuranic (TRU) wastes. The waste forms considered are cast cement, cold-pressed cement, FUETAP (formed under elevated temperature and pressure) cement, borosilicate glass, aluminosilicate glass, basalt glass-ceramic, and cold-pressed and sintered silicate ceramic. The waste-immobilization processes considered are in-can glass melting, joule-heated glass melting, glass marble forming, cement casting, cement cold-pressing, FUETAP cement processing, ceramic cold-pressing and sintering, basalt glass-ceramic processing. Properties considered included gas generation, chemical durability, mechanical strength, thermal stability, and radiation stability. The ceramic products demonstrated the best properties, except for plutonium release during leaching. The glass and ceramic products had similar properties. The cement products generally had poorer properties than the other forms, except for plutonium release during leaching. Calculations of the Pu release indicated that the waste forms met the proposed NRC release rate limit of 1 part in 10/sup 5/ per year in most test conditions. The cast-cement process had the lowest processing cost, followed closely by the cold-pressed and FUETAP cement processes. Joule-heated glass melting had the lower cost of the glass processes. In-can melting in a high-quality canister had the highest cost, and cold-pressed and sintered ceramic the second highest. Labor and canister costs for in-can melting were identified. The major contributor to costs of disposing of TRU wastes in a defense waste repository is waste processing costs. Repository costs could become the dominant cost for disposing of TRU wastes in a commercial repository. It is recommended that cast and FUETAP cement and borosilicate glass waste-form systems be considered. 13 figures, 16 tables.

  20. Draft Request for Proposal Documents | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Draft Request for Proposal Documents Instructions for DRAFT SNL Solicitation DE-SOL-0008470 Documents DRAFT Section B DE-SOL-0008470 DRAFT Section L DE-SOL-0008470 Instructions DRAFT Section M DE-SOL-0008470 Evaluation Factors DRAFT DE-SOL-0008470 Appendix A SNL Statement of Work DRAFT Section L Attachment E - Past Performance Information Form DRAFT Section L Attachment F - Past Performance Questionnaire DRAFT Section L Attachment G - Management Team Cost Sheet

  1. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    30-Day Federal Register Notice - Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal for collection of information under the provisions of the Paperwork Reduction Act of 1995. The proposed collection will {enter a brief description of the collection that

  2. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Revised 11-2009 30-Day Federal Register Notice - Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal for collection of information under the provisions of the Paperwork Reduction Act of 1995. The proposed collection will {enter a brief description of the

  3. 2013 INCITE Proposals due June 27

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    INCITE Proposals 2013 INCITE Proposals due June 27 June 15, 2012 by Francesca Verdier The Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program promotes transformational advances in science and technology through large allocations of computer time, supporting resources, and data storage at the Argonne and Oak Ridge Leadership Computing Facilities. 2013 proposals are due June 27. See 2013 INCITE Call for Proposals. Subscribe via RSS Subscribe Browse by Date October

  4. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    30-Day Federal Register Notice - Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal for collection of information under the provisions of the Paperwork Reduction Act of 1995. The proposed collection will {enter a brief description of the collection that

  5. 60-DAY Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy ACTION: Notice and Request for Comments SUMMARY: The Department of Energy (DOE) invites public comment on a proposed collection of information that DOE is developing for submission to the Office of Management and Budget (OMB) pursuant to the Paperwork Reduction Act of 1995. Comments are invited on: (a) whether the proposed collection of information is necessary for the proper

  6. Evaluation and Selection of CSES Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Evaluating, Selecting Proposals Evaluation and Selection of CSES Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email Geophysics W. Scott Baldridge (505) 667-4338 Email New student and postdoc proposals All new proposals undergo peer review by scientists in the broad research community who

  7. Microsoft Word - AAFS_Proposal_VB.doc

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    PROPOSAL FACT SHEET PAC cycle: (Do not complete) Date: Assigned Experiment Number Title: Experiment Spokesperson and Alternate: Telephone and...

  8. Method of forming structural heliostat

    DOE Patents [OSTI]

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  9. PROCESS OF FORMING POWDERED MATERIAL

    DOE Patents [OSTI]

    Glatter, J.; Schaner, B.E.

    1961-07-14

    A process of forming high-density compacts of a powdered ceramic material is described by agglomerating the powdered ceramic material with a heat- decompossble binder, adding a heat-decompossble lubricant to the agglomerated material, placing a quantity of the material into a die cavity, pressing the material to form a compact, pretreating the compacts in a nonoxidizing atmosphere to remove the binder and lubricant, and sintering the compacts. When this process is used for making nuclear reactor fuel elements, the ceramic material is an oxide powder of a fissionsble material and after forming, the compacts are placed in a cladding tube which is closed at its ends by vapor tight end caps, so that the sintered compacts are held in close contact with each other and with the interior wall of the cladding tube.

  10. Methods of forming boron nitride

    SciTech Connect (OSTI)

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  11. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G.; Chernicoff, William P.

    2002-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  12. Substrate system for spray forming

    DOE Patents [OSTI]

    Chu, Men G.; Chernicoff, William P.

    2000-01-01

    A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

  13. Technetium Immobilization Forms Literature Survey

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  14. Triggered pore-forming agents

    DOE Patents [OSTI]

    Bayley, H.; Walker, B.J.; Chang, C.Y.; Niblack, B.; Panchal, R.

    1998-07-07

    An inactive pore-forming agent is revealed which is activated to lytic function by a condition such as pH, light, heat, reducing potential, or metal ion concentration, or substance such as a protease, at the surface of a cell. 30 figs.

  15. Spin-forming Project Report

    SciTech Connect (OSTI)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  16. Process for forming sulfuric acid

    DOE Patents [OSTI]

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  17. Proposed On-Site Disposal Facility (OSDF) at the Paducah Gaseous Diffusion Plant

    Office of Environmental Management (EM)

    Property Transfer or Turn In Form, HQ F 1400.18 Property Transfer or Turn In Form, HQ F 1400.18 Property Transfer or Turn In Form, HQ F 1400.18 Property Transfer or Turn In Form, HQ F 1400.18 (63.58 KB) More Documents & Publications DOE HQ F 1400.18 DOE F 1400.8 DOE HQ F 580 EIS, Draft Corridors - September 2007. | Department of Energy

    Proposed Energy Transport Corridors: West-wide energy corridor programmatic EIS, Draft Corridors - September 2007. Proposed Energy Transport Corridors:

  18. Virtuality Distributions and Pion Transition Form Factor

    DOE PAGES-Beta [OSTI]

    Radyushkin, Anatoly V.

    2015-03-01

    Using the example of hard exclusive transition process γ*γ → π0 at the handbag level, we outline basics of a new approach to transverse momentum dependence in hard processes. In coordinate representation, matrix elements of operators (in the simplest case, bilocal O(0,z)) describing a hadron with momentum p, are functions of (pz) and z2 parametrized through virtuality distribution amplitudes (VDA) Φ(x, σ), with x being Fourier-conjugate to (pz) and σ Laplace-conjugate to z2. For intervals with z+=0, we introduce the transverse momentum distribution amplitude (TMDA) Ψ(x, k_perp), and write it in terms of VDA Φ(x,σ). We propose models for softmore » VDAs/TMDAs, and use them for comparison of handbag results with experimental (BaBar and BELLE) data. We also discuss the generation of hard tails of TMDAs from initially soft forms.« less

  19. Security Review Processing Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Security Review Processing Form Security Review Processing Form Security Review Process - Please review carefully. Security Acknowledge Form - Complete and return immediately. ...

  20. ORPS Facility Registration Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PDF icon ORPS Facility Registration Form More Documents & Publications ORPS User Registration Form Design Code Survey Form Federal Building Energy Use Benchmarking Guidance, August ...

  1. Oklahoma State University proposed Advanced Technology Research Center. Environmental Assessment

    SciTech Connect (OSTI)

    1995-06-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA) evaluating the construction and equipping of the proposed Advanced Technology Research Center (ATRC) at Oklahoma State University (OSU) in Stillwater, Oklahoma. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required.

  2. Ribosome engineering to promote new crystal forms

    SciTech Connect (OSTI)

    Selmer, Maria; Gao, Yong-Gui; Weixlbaumer, Albert; Ramakrishnan, V.

    2012-05-01

    Truncation of ribosomal protein L9 in T. thermophilus allows the generation of new crystal forms and the crystallization of ribosomeGTPase complexes. Crystallographic studies of the ribosome have provided molecular details of protein synthesis. However, the crystallization of functional complexes of ribosomes with GTPase translation factors proved to be elusive for a decade after the first ribosome structures were determined. Analysis of the packing in different 70S ribosome crystal forms revealed that regardless of the species or space group, a contact between ribosomal protein L9 from the large subunit and 16S rRNA in the shoulder of a neighbouring small subunit in the crystal lattice competes with the binding of GTPase elongation factors to this region of 16S rRNA. To prevent the formation of this preferred crystal contact, a mutant strain of Thermus thermophilus, HB8-MRCMSAW1, in which the ribosomal protein L9 gene has been truncated was constructed by homologous recombination. Mutant 70S ribosomes were used to crystallize and solve the structure of the ribosome with EF-G, GDP and fusidic acid in a previously unobserved crystal form. Subsequent work has shown the usefulness of this strain for crystallization of the ribosome with other GTPase factors.

  3. Forms | Y-12 National Security Complex

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Forms Forms The following are the official Y-12 forms needed by the public. Forms are provided in one or more of three formats: PDF fillable, Word, and HTML. Select a category to...

  4. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  5. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  6. Unsplit bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  7. Method of forming a joint

    DOE Patents [OSTI]

    Butt, Darryl Paul; Cutler, Raymond Ashton; Rynders, Steven Walton; Carolan, Michael Francis

    2006-08-22

    A method of joining at least two sintered bodies to form a composite structure, including providing a first multicomponent metallic oxide having a perovskitic or fluorite crystal structure; providing a second sintered body including a second multicomponent metallic oxide having a crystal structure of the same type as the first; and providing at an interface a joint material containing at least one metal oxide containing at least one metal identically contained in at least one of the first and second multicomponent metallic oxides. The joint material is free of cations of Si, Ge, Sn, Pb, P and Te and has a melting point below the sintering temperatures of both sintered bodies. The joint material is heated to a temperature above the melting point of the metal oxide(s) and below the sintering temperatures of the sintered bodies to form the joint. Structures containing such joints are also disclosed.

  8. Review of high-level waste form properties. [146 bibliographies

    SciTech Connect (OSTI)

    Rusin, J.M.

    1980-12-01

    This report is a review of waste form options for the immobilization of high-level-liquid wastes from the nuclear fuel cycle. This review covers the status of international research and development on waste forms as of May 1979. Although the emphasis in this report is on waste form properties, process parameters are discussed where they may affect final waste form properties. A summary table is provided listing properties of various nuclear waste form options. It is concluded that proposed waste forms have properties falling within a relatively narrow range. In regard to crystalline versus glass waste forms, the conclusion is that either glass of crystalline materials can be shown to have some advantage when a single property is considered; however, at this date no single waste form offers optimum properties over the entire range of characteristics investigated. A long-term effort has been applied to the development of glass and calcine waste forms. Several additional waste forms have enough promise to warrant continued research and development to bring their state of development up to that of glass and calcine. Synthetic minerals, the multibarrier approach with coated particles in a metal matrix, and high pressure-high temperature ceramics offer potential advantages and need further study. Although this report discusses waste form properties, the total waste management system should be considered in the final selection of a waste form option. Canister design, canister materials, overpacks, engineered barriers, and repository characteristics, as well as the waste form, affect the overall performance of a waste management system. These parameters were not considered in this comparison.

  9. Waste Determination Equivalency - 12172

    SciTech Connect (OSTI)

    Freeman, Rebecca D.

    2012-07-01

    The Savannah River Site (SRS) is a Department of Energy (DOE) facility encompassing approximately 800 square kilometers near Aiken, South Carolina which began operations in the 1950's with the mission to produce nuclear materials. The SRS contains fifty-one tanks (2 stabilized, 49 yet to be closed) distributed between two liquid radioactive waste storage facilities at SRS containing carbon steel underground tanks with storage capacities ranging from 2,800,000 to 4,900,000 liters. Treatment of the liquid waste from these tanks is essential both to closing older tanks and to maintaining space needed to treat the waste that is eventually vitrified or disposed of onsite. Section 3116 of the Ronald W. Reagan National Defense Authorization Act of Fiscal Year 2005 (NDAA) provides the Secretary of Energy, in consultation with the Nuclear Regulatory Commission (NRC), a methodology to determine that certain waste resulting from prior reprocessing of spent nuclear fuel are not high-level radioactive waste if it can be demonstrated that the waste meets the criteria set forth in Section 3116(a) of the NDAA. The Secretary of Energy, in consultation with the NRC, signed a determination in January 2006, pursuant to Section 3116(a) of the NDAA, for salt waste disposal at the SRS Saltstone Disposal Facility. This determination is based, in part, on the Basis for Section 3116 Determination for Salt Waste Disposal at the Savannah River Site and supporting references, a document that describes the planned methods of liquid waste treatment and the resulting waste streams. The document provides descriptions of the proposed methods for processing salt waste, dividing them into 'Interim Salt Processing' and later processing through the Salt Waste Processing Facility (SWPF). Interim Salt Processing is separated into Deliquification, Dissolution, and Adjustment (DDA) and Actinide Removal Process/Caustic Side Solvent Extraction Unit (ARP/MCU). The Waste Determination was signed by the

  10. Chevron, GE form Technology Alliance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Chevron, GE form Technology Alliance February 3, 2014 HOUSTON, TX, Feb. 3, 2014-Chevron Energy Technology Company and GE Oil & Gas announced today the creation of the Chevron GE Technology Alliance, which will develop and commercialize valuable technologies to solve critical needs for the oil and gas industry. The Alliance builds upon a current collaboration on flow analysis technology for oil and gas wells. It will leverage research and development from GE's newest Global Research Center,

  11. Disclosure of Lobbying Activities Form

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Approved by OMB 0348-0046 Disclosure of Lobbying Activities Complete this form to disclose lobbying activities pursuant to 31 U.S.C. 1352 (See reverse for public burden disclosure) | Type of Federal Action: a. contract ____ b. grant c. cooperative agreement d. loan e. loan guarantee f. loan insurance | Status of Federal Action: a. bid/offer/application _____ b. initial award c. post-award | Report Type: a. initial filing _____ b. material change | |Name and Address of Reporting Entity: ____

  12. Rib forming tool for tubing

    DOE Patents [OSTI]

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  13. Acceptance and Rejection of CSES Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Accepting, Rejecting Proposals Acceptance and Rejection of CSES Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email Acceptance Final decisions on acceptance and/or rejection of all proposals are reached after each science discipline's review meeting, held right after the close of

  14. EPA proposes to control automotive VOC emissions

    SciTech Connect (OSTI)

    Not Available

    1987-09-01

    US Environmental Protection Agency has proposed a vehicle control system for reducing gasoline vapors that can escape into the environment during refueling of motor vehicles. It has also has been proposed that gasoline refiners lower the volatility of commercial fuels in summer to reduce vehicle evaporative emissions. EPA said nationwide emissions of volatile organic compounds (VOC), a major contributor to the formation of urban ozone, could be reduced as much as 10% under the proposed pollution-control measures.

  15. Call issued for Proton Radiography Facility proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Call issued for Proton Radiography Facility proposals Call issued for Proton Radiography Facility proposals The proposal deadline is Feb. 6 for experiments to be carried out during Fiscal Year 2016 (Oct. 1, 2015 to Sept. 30, 2016), with consideration for extensions into FY17. January 5, 2015 Amy Clarke and Seth Imhoff of Materials Technology-Metallurgy (MST-6) align a copper density calibration object for a proton radiography experiment. Amy Clarke and Seth Imhoff of Materials

  16. Call for Proposals: VAF Now Accepting Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2016 VAF Call for Proposals Call for Proposals: VAF Now Accepting Applications Selected companies will receive financial awards to assist in taking their innovations to market more quickly. The median award amount has averaged $45,000. March 7, 2016 VAF call for proposals The VAF is the only non-dilutive local source of seed financing for very early stage technology startups in northern New Mexico. The funding fills a unique niche in that it supports companies that lack collateral for debt

  17. Whirlpool: Proposed Penalty (2013-SE-1420)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Whirlpool Corporation manufactured and distributed noncompliant refrigerator-freezers in the U.S.

  18. Research Subject Areas for IGPPS Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Research Subject Areas Research Subject Areas for IGPPS Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and...

  19. DHI: Proposed Penalty (2014-CE-32004)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that DHI Corp. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  20. Nicor: Proposed Penalty (2014-CE-32016)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Nicor, Inc. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  1. ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE...

    Office of Legacy Management (LM)

    ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE UNIVERSITY OF CHICAGO CONTAMINATED AS A RESULT OF PREVIOUS MEDAEC ACTIVITIES Prepared by ...

  2. Paragon Sales: Proposed Penalty (2012-CE-1417)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Paragon Sales Co., Inc., failed to certify certain Liebherr residential freezers as compliant with the energy conservation standards.

  3. CE: Proposed Penalty (2013-SE-1429)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that CE North America, LLC, privately labeled and distributed noncompliant freezers in the U.S.

  4. Sears: Proposed Penalty (2012-CE-3606)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Sears, Roebuck & Co. failed to certify two dehumidifiers as compliant with the applicable energy conservation standards.

  5. American Valve: Proposed Penalty (2010-CW-1411)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that American Valve, Inc. failed to certify a variety of showerheads as compliant with the applicable water conservation standards.

  6. Almo: Proposed Penalty (2012-CE-1416)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Almo Corporation failed to certify residential refrigerators as compliant with the applicable energy conservation standards.

  7. Hydac: Proposed Penalty (2012-SE-4107)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hydac Technology Corporation manufactured and distributed noncompliant electric motors in the U.S.

  8. Department of Energy Proposed Agency Information Collection:...

    Energy.gov (indexed) [DOE]

    to OMB pursuant to the Paperwork Reduction Act of 1995. Federal Register Volume 75 No 100. Federal Register notice for the Department of Energy Proposed Agency Information...

  9. Department of Energy Proposed Agency Information Collection:...

    Energy.gov (indexed) [DOE]

    Department of Energy proposed Agency Information Collection: The Department of Energy (DOE) invites public comment on DOE's request to the Office of Management and Budget (OMB) to...

  10. Haier: Proposed Penalty (2011-SE-1408)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Haier America Trading, L.L.C. privately labeled and distributed noncompliant freezers in the U.S.

  11. Danco: Proposed Penalty (2015-CW-28006)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Danco, Inc. failed to certify a variety of faucets as compliant with the applicable water conservation standards.

  12. Eurodib: Proposed Penalty (2014-CE-45001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Eurodib Inc. failed to certify automatic commercial ice makers as compliant with the applicable energy conservation standards.

  13. Sunpentown: Proposed Penalty (2012-CE-1505)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Sunpentown International Inc. failed to certify dehumidifiers as compliant with the energy conservation standards.

  14. 2014 DOE ALCC Proposals Due February 3

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ALCC Proposals Due February 3, 2014 2014 DOE ALCC Proposals Due February 3 December 23, 2013 by Francesca Verdier DOE's 2014 call for its ASCR Leadership Computing Challenge (ALCC) competition is posted: http://science.energy.gov/ascr/facilities/alcc/. There are new guidelines this year: http://science.energy.gov/ascr/facilities/alcc/alcc-application-details/. Proposals for 2014 ALCC are due 11:59 PM EST February 3rd, 2014. Email your completed proposal to ALCC@science.doe.gov. PDF format is

  15. Heat Controller: Proposed Penalty (2014-SE-15004)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Heat Controller, Inc. privately labeled and distributed noncompliant room air conditioners in the U.S.

  16. ETL: Proposed Penalty (2015-CW-29003)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that ETL, LLC failed to certify certain showerheads as compliant with the applicable water conservation standards.

  17. Electrolux: Proposed Penalty (2014-CE-23015)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Electrolux North America, Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  18. Philips: Proposed Penalty (2014-SE-48006)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Philips Lighting North America Corp. manufactured and distributed noncompliant illuminated exit signs in the U.S.

  19. Vehicle Technologies Office Research Partner Requests Proposals...

    Energy.gov (indexed) [DOE]

    Research Partner Requests Proposals for Thermal Management Systems These are how the nano-wires appear after the battery has gone through 10 charge-discharge cycles. EERE ...

  20. Electrolux: Proposed Penalty (2012-CE-1901)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Electrolux failed to certify a certain dishwasher as compliant with the applicable energy conservation standards.

  1. Tips for Writing a Competitive User Proposal

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    loosely related experiments in a single proposal Clearly articulate the science case: state the problem and its importance Place your research plan in the context of...

  2. BPA proposes resolution to electricity oversupply

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Portland, Ore. - The Bonneville Power Administration today proposed compensating wind energy producers within its section of the grid for periodically reducing their output...

  3. Royal Centurion: Proposed Penalty (2012-CE-3608)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Royal Centurion, Inc., failed to certify two dehumidifiers as compliant with the energy conservation standards.

  4. Allen Co: Proposed Penalty (2010-CW-0715)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Allen Co. failed to certify a variety of faucets as compliant with the applicable water conservation standards.

  5. Duro Corporation: Proposed Penalty (2014-CE-23009)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Duro Corporation failed to certify cooking products as compliant with the applicable energy conservation standards.

  6. Capital Cooking: Proposed Penalty (2014-CE-23008)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Capital Cooking Equipment, Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  7. ET Industries: Proposed Penalty (2012-SE-2902)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that ET Industries, Inc. manufactured and distributed noncompliant showerheads in the U.S.

  8. Maxlite: Proposed Penalty (2015-CE-27018)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Maxlite, Inc. failed to certify general service fluorescent lamps as compliant with the applicable energy conservation standards.

  9. BPA proposes rate increase to bolster

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    proposed a 9.6 percent average wholesale power rate increase to compensate for reduced revenue expectations from surplus power sales and to continue funding needed investments in...

  10. Universal: Proposed Penalty (2013-SE-26004)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Universal Lighting Technologies, Inc. manufactured and distributed noncompliant fluorescent lamp ballasts in the U.S.

  11. Basement Systems: Proposed Penalty (2010-CE-2110)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Basement Systems, Inc. failed to certify a variety of dehumidifier as compliant with the applicable energy conservation standards.

  12. Whirlpool: Proposed Penalty (2014-CE-21010)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Whirlpool Corporation failed to certify residential clothes dryers as compliant with the applicable energy conservation standards.

  13. Hudson Reed: Proposed Penalty (2011-SW-2909)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hudson Reed, Ltd. manufactured and distributed noncompliant showerheads in the U.S.

  14. Request for Proposal Guidance | Department of Energy

    Energy.gov (indexed) [DOE]

    When purchasing plug-in electric vehicle charging stations as part of your workplace charging program, your organization will want to consider issuing a Request for Proposal (RFP) ...

  15. Barron: Proposed Penalty (2013-SE-5402)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Barron Lighting Group, Inc. manufactured and distributed various noncompliant metal halide lamp fixtures in the U.S.

  16. University Park “STEP-UP” Proposal

    Office of Energy Efficiency and Renewable Energy (EERE)

    University Park “STEP-UP” Proposal: DE-FOA-0000148, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  17. Distinctive Appliances: Proposed Penalty (2014-CE-23020)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Distinctive Appliances Distributing Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  18. Evaluation and Selection of IGPPS Proposals

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    for major challenges. 1.0 Serious deficiencies render the proposal uninteresting (innovation andor impact) or implausible (team or approach). A "0" is grounds for...

  19. Kohler: Proposed Penalty (2014-CW-30003)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Kohler Co. failed to certify a variety of water closets as compliant with the applicable water conservation standards.

  20. Amerisink: Proposed Penalty (2010-CW-0710)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Amerisink, Inc. failed to certify a variety of faucets as compliant with the applicable water conservation standards.

  1. Quietside Corp: Proposed Penalty (2010-CE-1710)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Quietside Corporation failed to certify a variety of water heaters as compliant with the applicable energy conservation standards.

  2. Averen: Proposed Penalty (2010-CW-0711)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Averen, Inc. failed to certify a variety of faucets as compliant with the applicable water conservation standards.

  3. Morris: Proposed Penalty (2013-SE-5403)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Morris Products, Inc. manufactured and distributed noncompliant metal halide lamp fixtures in the U.S.

  4. Lutron Electronics: Proposed Penalty (2012-SE-3796)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Lutron Electronics Co., Inc. manufactured and distributed noncompliant class A external power supplies in the U.S.

  5. American Range: Proposed Penalty (2014-CE-23006)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that American Range Corporation failed to certify cooking products as compliant with the applicable energy conservation standards.

  6. Viking Range: Proposed Penalty (2014-CE-23014)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Viking Range, LLC failed to certify cooking products as compliant with the applicable energy conservation standards.

  7. Acme Kitchenettes: Proposed Penalty (2011-CE-1406)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Acme Kitchenettes Corp. failed to certify a variety of refrigerators as compliant with the applicable energy conservation standards.

  8. Engineered Solutions: Proposed Penalty (2010-CE-2112)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Engineered Solutions, Inc. failed to certify a dehumidifier as compliant with the applicable energy conservation standards.

  9. GE Appliances: Proposed Penalty (2010-CE-2113)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that General Electric Appliances failed to certify a variety of dehumidifiers as compliant with the applicable energy conservation standards.

  10. Harrington: Proposed Penalty (2014-SW-28011)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Harrington Brass Works manufactured and distributed noncompliant faucets in the U.S.

  11. Ramblewood Green: Proposed Penalty (2014-CE-23017)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Ramblewood Green Ltd. failed to certify cooking products as compliant with the applicable energy conservation standards.

  12. Dacor: Proposed Penalty (2014-CE-23010)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Dacor failed to certify cooking products as compliant with the applicable energy conservation standards.

  13. Perlick: Proposed Penalty (2013-SE-14002)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Perlick Corporation manufactured and distributed noncompliant refrigerator basic model HP48RR in the U.S.

  14. Danby Products: Proposed Penalty (2012-CE-1415)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Danby Products, Inc. failed to certify refrigerators and freezers as compliant with the energy conservation standards.

  15. Perlick: Proposed Penalty (2013-SE-14001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Perlick Corporation manufactured and distributed noncompliant freezer basic model HP24F in the U.S.

  16. Fisher & Paykel: Proposed Penalty (2014-CE-23012)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Fisher & Paykel Appliances, Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  17. The Proposed Yucca Mountain Repository From A Corrosion Perspective

    SciTech Connect (OSTI)

    J.H. Payer

    2005-03-10

    Corrosion is a primary determinant of waste package performance at the proposed Yucca Mountain Repository and will control the delay time for radionuclide transport from the waste package. Corrosion is the most probable and most likely degradation process that will determine when packages will be penetrated and the shape size and distribution of those penetrations. The general issues in corrosion science, materials science and electrochemistry are well defined, and the knowledge base is substantial for understanding corrosion processes. In this paper, the Yucca Mountain Repository is viewed from a corrosion perspective.

  18. Rapid Freeform Sheet Metal Forming

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vij Kiridena, Ford Motor Company U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. June 14, 2016 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Develop a transformational RApid Freeform sheet metal Forming Technology (RAFFT) to deliver:  A sheet metal parts (up to 2.0 m x 1.5 m)  Dimensional accuracy (± 1.0 mm) & surface finish (Ra < 30 µm)  3-day art to part total time

  19. DOE Form 1332.4

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2 DOE F 243.2 Records Scheduling Request DOE F 243 2 Records Scheduling Request Form (1).pdf (335.35 KB) More Documents & Publications DOE F 243.5 Electronic Recordkeeping System Questionnaire Records Management Handbook Records Management Handbook Energy

    5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire DOE F 243.5 Electronic Recordkeeping System Questionnaire.pdf (69.34 KB) More Documents & Publications DOE F 243.5

  20. RadBudgForm.revised

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    RADIATION BUDGET FORM PAGE NUM/REV 1/- Fill in blanks or (preferably) provide in tab-separated or Excel/WKS format. Hall (circle one): A B C experiment num.: _______________ drawing num. supplied: _______________ name of liaison: _________________________ run hours (100% effect.) days* 0.0 setup number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 beam energy GeV beam current uA(CW) mean polarization % exp/target ID number exp't target material (1) exp't target thickness (1) mg/cm2 exp't target

  1. FORMING PROTECTIVE FILMS ON METAL

    DOE Patents [OSTI]

    Gurinsky, D.H.; Kammerer, O.F.; Sadofsky, J.; Weeks, J.R.

    1958-12-16

    Methods are described of inhibiting the corrosion of ferrous metal by contact with heavy liquid metals such as bismuth and gallium at temperatures above 500 icient laborato C generally by bringing nltrogen and either the metal zirconium, hafnium, or titanium into reactlve contact with the ferrous metal to form a thin adherent layer of the nitride of the metal and thereafter maintaining a fractional percentage of the metal absorbed in the heavy liquid metal in contact with the ferrous metal container. The general purpose for uslng such high boiling liquid metals in ferrous contalners would be as heat transfer agents in liquid-metal-fueled nuclear reactors.

  2. Sample Indirect Rate Proposal (Pre-Award) and For-Profit Compliance Audit

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Information | Department of Energy Sample Indirect Rate Proposal (Pre-Award) and For-Profit Compliance Audit Information Sample Indirect Rate Proposal (Pre-Award) and For-Profit Compliance Audit Information Indirect rate and audit forms for the financial opportunities process: Sample Indirect Rate Proposal (Pre-Award): There are several methods for allocating indirect cost/expenses to projects, activities and programs, DCAA "ICE" model, Single Rate Method, and Two Rate Method.

  3. CX-100312 Categorical Exclusion Determination

    Energy.gov [DOE]

    Withdrawal of Proposed Determination Regarding Energy Conservation Program: Natural Draft Commercial Boilers RIN: 1904-AD01 CX(s) Applied: A5 EERE- Buildings Technology Program Date: 07/20/2015 Location(s): Nationwide Office(s): Golden Field Office

  4. Integrally formed radio frequency quadrupole

    DOE Patents [OSTI]

    Abbott, Steven R.

    1989-01-01

    An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

  5. The proposed Institute for Micro-manufacturing, Louisiana Tech University

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA) DOE/EA-0958, evaluating the construction and equipping of two components of the proposed Institute for Micro-manufacturing at Louisiana Tech University (LTU), a proposed R and D facility to be located in Ruston, LA. and, the proposed installation of a beamline for micro-machining applications at the Center for Advanced Microstructures and Devices (CAMD) facility at Louisiana State University in Baton Rouge, LA. The objective of the proposed project is to focus on the applied, rather than basic research emphasizing the design and development, metrology, inspection and testing, and the assembly and production of micron and submicron structures and devices. Also, the objective of the beamline at CAMD would be the fundamental study of processing and analysis technologies, including x-ray lithography, which are important to microstructures fabrication and electronic device development. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an Environmental Impact Statement is not required.

  6. Alumina forming iron base superalloy

    DOE Patents [OSTI]

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  7. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  8. CFCNCA Sample Pledge Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    CFCNCA Sample Pledge Form CFCNCA Sample Pledge Form This file contains a sample pledge form and instructions for completing a paper donation through the CFC. CFCNCA Fall 2012 Sample Pledge Form.pdf (151.39 KB) More Documents & Publications CFCNCA Sample Pledge Form 2012 CFCNCA Catalog of Caring DOE F 3630.1 Rights and Benefits of Reservists Called to Active Duty

  9. Two Forms of Identification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Forms of Identification Two Forms of Identification Two Forms of Identification (95.07 KB) More Documents & Publications Self-Identification of Disability LNG Exports by Truck out of the U.S. Form LNG Imports by Truck into the U.S. Form

  10. NIF Full Proposal Instructions_Final

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    NIF Discovery Science: Full Proposal Instructions 5/16/16 (rev.) 1 Please prepare your full proposal according to the following instructions. Append biographical sketches (CVs) for the Principal Investigator (PI) and no more than 5 additional key team members to the end of this proposal. Submission Deadlines: Save the entire document as a single file in pdf format, and submit via the Web submission tool before 11:59 p.m. on September 1, 2016, PDT. I. COVER SHEET: (1 page) 1) Please provide the

  11. DIRECT DISPOSAL OF A RADIOACTIVE ORGANIC WASTE IN A CEMENTITIOUS WASTE FORM

    SciTech Connect (OSTI)

    Zamecnik, J; Alex Cozzi, A; Russell Eibling, R; Jonathan Duffey, J; Kim Crapse, K

    2007-02-22

    The disposition of {sup 137}Cs-containing tetraphenylborate (TPB) waste at the Savannah River Site (SRS) by immobilization in the cementitious waste form, or grout called ''saltstone'' was proposed as a straightforward, cost-effective method for disposal. Tests were performed to determine benzene release due to TPB decomposition in saltstone at several initial TPB concentrations and temperatures. The benzene release rates for simulants and radioactive samples were generally comparable at the same conditions. Saltstone monoliths with only the top surface exposed to air at 25 and 55 C at any tetraphenylborate concentration or at any temperature with 30 mg/L TPB gave insignificant releases of benzene. At higher TPB concentrations and 75 and 95 C, the benzene release could result in exceeding the Lower Flammable Limit in the saltstone vaults.

  12. Plasma digital density determining device

    DOE Patents [OSTI]

    Sprott, Julien C.; Lovell, Thomas W.; Holly, Donald J.

    1976-01-01

    The density of a decaying plasma in an electrically conducting enclosure is determined by applying an excitation to the cavity formed by the enclosure and counting digitally the number of resonant frequencies traversed by the combination of the cavity and the decaying plasma.

  13. Form W-9 (Rev. October 2007)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Give form to the requester. Do not send to the IRS. Form W-9 Request for Taxpayer ... Date General Instructions Form W-9 (Rev. 10-2007) Part I Part II Business ...

  14. Postdoctoral Initial Discussion Form | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Initial Discussion Form This form outlines initial goals and clarifies expectations between a postdoc and his/her supervisor for a successful and productive relationship. Microsoft Office document icon Postdoctoral Initial Discussion Form.doc

  15. DEQ UPDES Forms Website | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    UPDES Forms Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: DEQ UPDES Forms Website Abstract A website containing forms and guidance for...

  16. Capital Equipment Validation Form | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Capital Equipment Validation Form Version Number: 2.0 Document Number: Form 48100.001 Effective Date: 02/2015 File (public): Office spreadsheet icon form_48100.001_rev2.xls

  17. Form:EZFeed Policy | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Help Apps Datasets Community Login | Sign Up Search Form Edit History Form:EZFeed Policy Jump to: navigation, search This is the 'EZFeed Policy' form. To add a page with this...

  18. Hisense USA: Proposed Penalty (2010-CE-1211)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hisense USA Corp. failed to certify a variety of residential refrigerators, refrigerator-freezers, and freezers as compliant with the applicable energy conservation standards.

  19. USA Manufacturing: Proposed Penalty (2013-CE-5336)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that USA Manufacturing failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  20. Polar King: Proposed Penalty (2013-CE-5328)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Polar King International Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  1. Model Investment Grade Audit and Project Proposal

    Energy.gov [DOE]

    Information and documents for conducting an investment grade audit to evaluate potential measures and presenting a project proposal for a set of bundled measures that deliver savings to pay for the project over the finance term.

  2. Request for Proposals | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    for Proposals rfp Deadline - July 31, 2014 The Defense Logistics Agency (DLA) RFP (Sol. SPE600-14-R-0415) seeking up to 830,843 megawatt-hours of renewable energy...

  3. Hicon: Proposed Penalty (2013-SE-1426)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Ningbo Hicon International Industry Company, Ltd. manufactured and distributed noncompliant freezer basic model BD-200 in the U.S.

  4. Mackle Company: Proposed Penalty (2011-CE-2102)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The Mackle Company, Inc. failed to certify a variety of residential clothes dryers as compliant with the applicable energy conservation standards.

  5. MC Appliance: Proposed Penalty (2014-CE-20002)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that MC Appliance Corporation failed to certify residential clothes washers and residential clothes dryers as compliant with the applicable energy conservation standards.

  6. Sylvane: Proposed Penalty (2013-CE-36005)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Sylvane, Inc. failed to certify at least two dehumidifier basic models as compliant with the applicable energy conservation standards.

  7. Vaxcel: Proposed Penalty (2014-CE-32006)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Vaxcel International Co., Ltd. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  8. Yosemite: Proposed Penalty (2014-CE-32015)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Northern Central Distributing, Inc. d/b/a Yosemite Home Décor failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  9. Trastar: Proposed Penalty (2013-CE-49003)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Trastar Inc. failed to certify a variety of basic models of traffic signal modules and pedestrian models as compliant with the applicable energy conservation standards.

  10. Heat Controller: Proposed Penalty (2011-CE-1507)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Heat Controller, Inc. failed to certify a variety of room air conditioners as compliant with the applicable energy conservation standards.

  11. Jamison Door: Proposed Penalty (2013-CE-5348)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Jamison Door Company failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  12. Kichler: Proposed Penalty (2014-CE-32007)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The L.D. Kiebler Co. d/b/a Kichler Lighting failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  13. MC Appliance: Proposed Penalty (2012-CE-1508)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that CNA International Inc. d/b/a MC Appliance Corporation failed to certify a variety of room air conditioners as compliant with the applicable energy conservation standards.

  14. Matthews Fan: Proposed Penalty (2014-CE-32012)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Matthews-Gerbar, Ltd. d/b/a Matthews Fan Company failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  15. Daewoo: Proposed Penalty (2010-CE-0410)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Daewoo International Inc. failed to certify a variety of residential clothes dryers as compliant with the applicable energy conservation standards.

  16. Emerson: Proposed Penalty (2014-CE-54001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Emerson Electric Co. failed to certify a variety of metal halide lamp fixtures as compliant with the applicable energy conservation standards.

  17. Winix: Proposed Penalty (2012-CE-3607)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Cloud 9 Marketing, Inc. d/b/a Winix, Inc. failed to certify dehumidifiers as compliant with the applicable energy conservation standards.

  18. Haier: Proposed Penalty (2011-CE-2104)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Haier America Trading LLC failed to certify various residential clothes dryers as compliant with the applicable energy conservation standards.

  19. Shandong Hongtai: Proposed Penalty (2016-SE-42010)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Shandong Hongtai Electrical Appliance Co., Ltd. manufactured and distributed noncompliant commercial freezer model TUC-27F in the U.S.

  20. Nostalgia Products: Proposed Penalty (2014-CE-14017)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Nostalgia Products Group, LLC failed to certify a variety of consumer refrigerators and refrigerator-freezers as compliant with the applicable energy conservation standards.

  1. Volume International: Proposed Penalty (2014-CE-32014)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Volume International Corporation failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  2. Litex: Proposed Penalty (2014-CE-32011)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Litex Industries, Limited failed to certify a variety of celing fans as compliant with the applicable energy conservation standards.

  3. BSH: Proposed Penalty (2013-CE-2001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that BSH Home Appliances Corp. failed to certify a variety of residential clothes washers as compliant with the applicable energy/water conservation standards.

  4. Crane: Proposed Penalty (2016-CE-52001)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Crane Merchandising Systems failed to certify certain models of refrigerated bottled or canned beverage vending machines as compliant with the applicable energy conservation standards.

  5. Commercial Cooler: Proposed Penalty (2013-CE-5343)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Commercial Cooler, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  6. Airwell Group: Proposed Penalty (2011-CE-1505)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Airwell Group failed to certify a variety of Fedders brand room air conditioners as compliant with the applicable energy conservation standards.

  7. Hunter Fan: Proposed Penalty (2014-CE-32008)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hunter Fan Company failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  8. Acuity: Proposed Penalty (2013-CE-4802)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Acuity Brands Lighting failed to certify a variety of illuminated exit signs as compliant with the applicable energy conservation standards.

  9. Aucma Group: Proposed Penalty (2011-CE-1405)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Aucma Group (aka Qingdao Aucma Import and Export Co., Ltd.) failed to certify a variety of residential refrigerators and freezers as compliant with the applicable energy conservation standards.

  10. Fagor America: Proposed Penalty (2014-CE-23018)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Fagor America, Inc. failed to certify various basic models of cooking products as compliant with the applicable energy conservation standards.

  11. Cospolich Refrigerator: Proposed Penalty (2013-CE-5314)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Cospolich Refrigerator Co, Inc. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  12. Manitowoc Foodservice: Proposed Penalty (2012-CE-5309)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Manitowoc Foodservice failed to certify various walk-in coolers and freezers (WICFs) and their components as compliant with the applicable energy conservation standards.

  13. Amerikooler: Proposed Penalty (2013-CE-5307)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Amerikooler, Inc. failed to certify walk-in cooler or freezer (WICF) components as compliant with the energy conservation standards.

  14. Aircooler: Proposed Penalty (2013-CE-5338)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Aircooler Corporation failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  15. Leer: Proposed Penalty (2013-CE-5325)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Leer, Inc. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  16. American Standard: Proposed Penalty (2013-CW-3001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that AS America, Inc., d/b/a American Standard Brands failed to certify a variety of water closets as compliant with the applicable water conservation standards.

  17. Smeg: Proposed Penalty (2014-CE-23003)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Smeg USA Inc. failed to certify various basic models of refrigerators/refrigerator-freezers/freezers, dishwashers, and cooking products as compliant with the applicable energy conservation standards.

  18. Refrigerator Manufacturers: Proposed Penalty (2013-CE-5341)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Refrigerator Manufacturers, LLC failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  19. Barron: Proposed Penalty (2013-CE-48004)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Barron Lighting Group, Inc. failed to certify a variety of illuminated exit sign models as compliant with the applicable energy conservation standards.

  20. Proposed Process: NNMCAB Input on Campaigns

    Energy.gov [DOE]

    At the April 9, 2014 Committee meeting Jeff Mousseau LANL, Provided Information on the New Proposed Campaign Process for Field Work. Field work at LANL to be Divided into 17 Campaigns in 5 Categories.

  1. Southeast Cooler: Proposed Penalty (2013-CE-5331)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Southeast Cooler Corp. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  2. Watermark: Proposed Penalty (2011-SW-2908)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Watermark Designs, Ltd. manufactured and distributed noncompliant showerhead basic model SH-FAL90 in the U.S.

  3. Golden Opportunity: Proposed Penalty (2014-CE-20003)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Golden Opportunity, Inc. failed to certify room air conditioners, central air conditioners/heat pumps, and residential clothes washers as compliant with the applicable energy conservation standards.

  4. Midea: Proposed Penalty (2013-SE-1505)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that GD Midea Air-Conditioning Equipment Co. Ltd. manufactured and distributed noncompliant room air conditioner basic model MWJ1-08ERN1-BI8 in the U.S.

  5. Keystone: Proposed Penalty (2013-CE-2601)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Keystone Technologies, LLC failed to certify a variety of fluorescent lamp ballasts as compliant with the applicable energy conservation standards.

  6. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal ...

  7. Dade Engineering: Proposed Penalty (2013-CE-5316)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Dade Engineering Corp. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  8. Royal Pacific: Proposed Penalty (2013-SE-33004)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Royal Pacific, Ltd. failed to certify ceiling fans, ceiling fan light kits, medium base compact fluorescent lamps, and illuminated exit signs as compliant with the applicable energy conservation standards.

  9. Environmental impacts of proposed Monitored Retrievable Storage

    SciTech Connect (OSTI)

    Scharber, Wayne K.; Macintire, H. A.; Davis, Paul E.; Cothron, Terry K.; Stephens, Barry K.; Travis, Norman; Walter, George; Mobley, Mike

    1985-12-17

    This report describes environmental impacts from a proposed monitored retrievable storage facility for spent fuels to be located in Tennessee. Areas investigated include: water supply, ground water, air quality, solid waste management, and health hazards. (CBS)

  10. Fagor America: Proposed Penalty (2013-CEW-19001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Fagor America, Inc. failed to certify a variety of residential refrigerator-freezers and dishwashers as compliant with the applicable energy and water conservation standards.

  11. International Refrigeration: Proposed Penalty (2012-CE-1510)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that International Refrigeration Products failed to certify a various room air conditioners as compliant with the applicable energy conservation standards.

  12. Golden Cooler: Proposed Penalty (2013-CE-5345)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Golden Cooler failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  13. Hayward Industries: Proposed Penalty (2010-CE-1110)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hayward Industries, Inc. failed to certify a variety of pool heaters as compliant with the applicable energy conservation standards.

  14. Goodman Manufacturing: Proposed Penalty (2011-SE-4301)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing manufactured and distributed noncompliant basic model CPC180* commercial package air conditioners in the U.S.

  15. Goodman: Proposed Penalty (2012-CE-1509)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing Company, L.P., failed to certify a various room air conditioners as compliant with the applicable energy conservation standards.

  16. Avanti: Proposed Penalty (2013-CE-2105)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Avanti Products, LLC, failed to certify a variety of residential clothes dryers as compliant with the applicable energy conservation standards.

  17. Distinctive Appliances: Proposed Penalty (2015-CE-14019)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Distinctive Appliances Distributing, Inc. failed to certify various Fhiaba-brand refrigerator-freezers as compliant with the applicable energy conservation standards.

  18. LG: Proposed Penalty (2014-SE-15011)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that LG Electronics USA, Inc. manufactured and distributed noncompliant room air conditioner basic model LT143CNR in the U.S.

  19. LG: Proposed Penalty (2015-CE-14022)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that LG Electronics USA, Inc. failed to certify various refrigerator-freezer basic models as compliant with the applicable energy conservation standards.

  20. PQL: Proposed Penalty (2013-CE-27001)

    Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that P.Q.L., Inc. failed to certify various basic models of medium base compact fluorescent lamps as compliant with the applicable energy conservation standards.