National Library of Energy BETA

Sample records for dc richard newell

  1. Richard Newell

    Energy.gov [DOE]

    Dr. Richard G. Newell was the Administrator of the U.S. Energy Information Administration (EIA). He was sworn in on August 3, 2009 as the seventh Administrator of the U.S. Energy Information...

  2. Microsoft Word - Newell_intro.docx

    Gasoline and Diesel Fuel Update

    Energy Secretary Steven Chu by EIA Administrator Richard Newell [Note: Recorders did not pick up introduction of panel (see biographies for details on the panelists) or introduction of session.] Richard: I can hear myself now; there we go. Mr. Secretary, distinguished speakers, guests, colleagues, welcome to the US Energy Information Administration's 2010 conference. I'm Richard Newell, Administrator of the US Energy Information Administration. In behalf...on behalf of everyone at the EIA, I

  3. Newell, Iowa: Energy Resources | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    This article is a stub. You can help OpenEI by expanding it. Newell is a city in Buena Vista County, Iowa. It falls under Iowa's 5th congressional district.12 References ...

  4. Richard Gerber

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Gerber Richard Gerber GerberRichard Richard A. Gerber , Ph.D. Acting HPC Department Head, NERSC Senior Science Advisor RAGerber@lbl.gov Phone: (510) 486-6820 Fax: (510) 486-4316 1 Cyclotron Road Mail Stop 943R0256 Berkeley, CA 94720 US Biographical Sketch Richard Gerber is NERSC's Senior Science Advisor and Acting Head of the HPC Department. Richard has been involved with leading-edge High Performance Computing systems for almost 30 years, including early Cray vector systems at the National

  5. Richard Gerber

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    serves as the liason to the NERSC User Group (NUG), manages NERSC's trouble ticket system, and designs and implements NERSC's annual user survey. Richard is keenly interested...

  6. Richard Dickson

    Energy.gov [DOE]

     Richard Dickson leads the DOE-Idaho Technical Safety Team that has responsibility for oversight of nuclear training, criticality safety, radiation protection and lessons learned at the Idaho...

  7. Richard Rosenberg

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Light-Emission Properties of Silicon-Based Nanostructures," ChemPhysChem. 8, 2557 (2007). Richard A. Rosenberg, Gopal K. Shenoy, Matthew F. Chisholm, Li-Chia Tien, David Norton,...

  8. Richard Burroughs

    Energy.gov [DOE]

    Richard has served as the chief of staff in the Anderson County mayor’s office since 2012. Prior to that post, his professional experiences were related to his background as a registered...

  9. Landslide assessment of Newell Creek Canyon, Oregon City, Oregon

    SciTech Connect

    Growney, L.; Burris, L.; Garletts, D.; Walsh, K. . Dept. of Geology)

    1993-04-01

    A study has been conducted in Newell Creek Canyon near Oregon City, Oregon, T3S, T2S, R2E. A landslide inventory has located 53 landslides in the 2.8 km[sup 2] area. The landslides range in area from approximately 15,000m[sup 2] to 10m[sup 2]. Past slides cover an approximate 7% of the canyon area. Landslide processes include: slump, slump-translational, slump-earthflow and earthflow. Hard, impermeable clay-rich layers in the Troutdale Formation form the failure planes for most of the slides. Slopes composed of Troutdale material may seem to be stable, but when cuts and fills are produced, slope failure is common because of the perched water tables and impermeable failure planes. Good examples of cut and fill failures are present on Highway 213 which passes through Newell Creek Canyon. Almost every cut and fill has failed since the road construction began. The latest failure is in the fill located at mile-post 2.1. From data gathered, a slope stability risk map was generated. Stability risk ratings are divided into three groups: high, moderate and low. High risk of slope instability is designated to all landslides mapped in the slide inventory. Moderate risk is designated to slopes in the Troutdale Formation greater than 8[degree]. Low risk is designated to slopes in the Troutdale Formation less than 8[degree].

  10. Dr. Richard Knaub

    Energy.gov [DOE]

    Dr. Richard Knaub is a Project Leader in Weatherization & Workforce Development at the National Renewable Energy Laboratory.

  11. Richard Gerber's NERSC Blog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Gerber Richard Gerber's NERSC Blog NERSC, PDSF, Neutrino Oscillations and the 2015 Physics Nobel Prize October 8, 2015 by Richard Gerber Perhaps the most rewarding aspect of working at NERSC is sharing in the scientific enterprise, working day-to-day with the best scientists in the world seeking to answer the most interesting questions ever posed. How does the nanoworld work? Where did our universe come from and where is it going? How are we affecting our environment and what could we do

  12. Richard W. Mies

    Energy.gov [DOE]

    Admiral Richard W. Mies completed a distinguished 35-year career in the US Navy.  He commanded US Strategic Command for four years prior to retirement.  As Commander in Chief, he was...

  13. Richard Karney | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Richard Karney About Us Richard Karney - Senior Technical Advisor Richard manages BTO's involvement with the U.S.-China Clean Energy Research Center (CERC) and the U.S.-India Centre for Building Energy Research and Development (CBERD). Email Richard Karney ►

  14. Richard Kauffman | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Kauffman About Us Richard Kauffman - Senior Advisor to the Secretary of Energy Richard Kauffman Richard L. Kauffman joined the Energy Department in September to serve as a Senior Advisor to Secretary Steven Chu. Richard is one of the country's leading experts on private sector investment in clean energy. He was Chief Executive Officer of Good Energies, Inc. a leading investor in renewable energy and energy efficiency technologies. Richard was managing director and chaired the Global Financing

  15. Richard Wilson | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard W. Mies About Us Richard W. Mies - CEO and President, The Mies Group, LTD Richard W. Mies Admiral Richard W. Mies completed a distinguished 35-year career in the US Navy. He commanded US Strategic Command for four years prior to retirement. As Commander in Chief, he was directly responsible for the command and control of the Nation's strategic nuclear forces supporting the national security objective of strategic deterrence. Admiral Mies has a unique breadth and depth of operational and

  16. Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovation and Deployment | Department of Energy Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment October 19, 2011 - 3:00pm Addthis Washington, D.C. -- Thursday, October 20th, Richard Kauffman, Senior Adviser to the Secretary of Energy, will host the Department of Energy's third "Energy Matters" live chat. Kauffman will discuss the challenges and

  17. Richard L. Kurtz

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard L. Kurtz, Ph.D. Title: CAMD Interim Director LSU Professor of Physics Associate Dean, College of Basic Sciences Office Tel. : (225) 772-4029 E-mail: rlkurtz@lsu.edu Ph.D., 1983 - Yale University Louisiana State University Department of Physics & Astronomy 217-C Nicholson Hall, Tower Dr. Baton Rouge, LA 70803-4001 (225) 578-4029-Office, 2576-Lab Research Home Page RESEARCH INTERESTS Experimental Solid State Physics My research interests are focused on the application of synchrotron

  18. Faces of Science:Richard Sayre

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Sayre Faces of Science: Richard Sayre Richard Sayre cites his father as his greatest influence. "He and I built cars and experimented with solar cells ... with great fun and passion." Richard works on biofuel production systems and global food-security challenges. March 4, 2015 Richard Sayre Richard Sayre, Biofoods and Biofuels Contact Communications Office (505) 667-6700 BIOFOODS and BIOFUELS Working at the cutting edge of discovery fuels Sayre's science Richard Sayre's

  19. Richard E. Smalley, Buckminsterfullerene (the Buckyball), and...

    Office of Scientific and Technical Information (OSTI)

    (the Buckyball), and Nanotubes Resources with Additional Information Richard E. Smalley Courtesy Carbon Nanotechnology Laboratory at Rice University and Prof. Richard...

  20. QER- Comment of Richard Bajura

    Energy.gov [DOE]

    Is there a registration process for the meeting? I plan to attend. RAB Richard A. Bajura Director, National Research Center for Coal and Energy 385 Evansdale Drive, West Virginia University Morgantown, WV 26506-6064 Office: 304-293-6034

  1. Richard Lazarus Named as Executive Director of National Commission on the

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BP Deepwater Horizon Oil Spill and Offshore Drilling | Department of Energy Richard Lazarus Named as Executive Director of National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling Richard Lazarus Named as Executive Director of National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling June 22, 2010 - 12:00am Addthis WASHINGTON, D.C. - The co-chairs of the bipartisan National Commission on the BP Deepwater Horizon Oil Spill and Offshore Drilling

  2. A Celebration of Richard Feynman

    ScienceCinema

    None

    2016-07-12

    In honor of the 2005 World Year of Physics, on the birthday of Nobel Prize-winning physicist Richard Feynman, BSA sponsored this celebration. Actor Norman Parker reads from Feynman's bestselling books, and Ralph Leighton and Tom Rutishauser, who played bongos with Feynman, reminisce on what it was like to drum with him.

  3. CB Richard Ellis | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    CB Richard Ellis Jump to: navigation, search Name: CB Richard Ellis Address: 1225 17th St. Place: Denver, CO Zip: 80202 Website: www.cbre.com Coordinates: 39.7496282,...

  4. Microsoft PowerPoint - 2a_RIchard Meehan _NMMSS_2014_Powerpoint_TEMPLATE.ppt [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Programmatic Perspectives Richard Meehan, NNSA

  5. Richard Ahrenkiel - Research Fellow Emeritus | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Ahrenkiel - Research Fellow Emeritus Photo of Richard Ahrenkiel Research Fellows Dr. Ahernkiel's area of specialization is the measurement and characterization of photovoltaic cells and materials. He is one of the world experts in the area of carrier recombination and carrier lifetime. He invented a unique technique for measuring the excess carrier lifetime in materials. Dr. Richard K. Ahrenkiel is a Research Fellow Emeritus of the National Renewable Energy Laboratory (NREL) and Research

  6. Richard T. (Rick) Elander| Bioenergy | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    S. Middleton About Us Richard S. Middleton - Los Alamos National Laboratory Richard S. Middleton is a research scientist in the Earth and Environmental Sciences Division at Los Alamos National Laboratory, one of the Department of Energy's 17 National Laboratories. He works on carbon capture and storage, geothermal energy, shale gas and the energy-water nexus. Most Recent Plastic Bags Might Kickstart the Carbon Capture Industry May

    Rick Elander Richard T. (Rick) Elander Biochemical Conversion

  7. Richard Coffey | Argonne Leadership Computing Facility

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Coffey Director of User Experience Argonne National Laboratory 9700 South Cass Avenue Building 240 - Rm. 3128 Argonne IL, 60439 630-252-2725 richardc@alcf.anl.gov Richard Coffey is the Director of User Experience. His interests are data mining, business intelligence, mentoring, team building, leadership, and providing the very best customer experience. Richard worked for five years at University of Washington where he was the Director of IT for Physics and Astronomy, built and managed a

  8. Richard P. Feynman and the Feynman Diagrams

    Office of Scientific and Technical Information (OSTI)

    Resources with Additional Information Richard P. Feynman Courtesy AIP Emilio Segr Visual Archives, Weber Collection 'Feynman remade quantum electrodynamics-the theory of...

  9. Faces of Science:Richard Sayre

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    edge of discovery fuels Sayre's science Richard Sayre's passion for plants, photosynthesis, and biophysics was nurtured by his father, who was a physician and a keen organic...

  10. Richard Shaheen named Senior VP of Transmission

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    transmission lines and initiated upgrades to Celilo Substation and the Pacific Direct Current Intertie. "Richard is an excellent leader, and his 25-plus years of experience at a...

  11. Richard E. Smalley, 1991 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard E. Smalley, 1991 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1990's Richard E. Smalley, 1991 Print Text Size: A A A FeedbackShare Page Chemistry: For his bold

  12. Richard Fortner, 1991 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Fortner, 1991 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1990's Richard Fortner, 1991 Print Text Size: A A A FeedbackShare Page National Security: For an

  13. Richard J. Saykally, 2004 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard J. Saykally, 2004 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 2000's Richard J. Saykally, 2004 Print Text Size: A A A FeedbackShare Page Chemistry: For his

  14. Richard L. Garwin, 1996 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard L. Garwin, 1996 The Enrico Fermi Award Fermi Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's 1950's Ceremony The Life of Enrico Fermi Contact Information The Enrico Fermi Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1990's Richard L. Garwin, 1996 Print Text Size: A A A FeedbackShare Page Citation For his exceptional contributions to the

  15. Richard Latter, 1968 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Latter, 1968 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1960's Richard Latter, 1968 Print Text Size: A A A FeedbackShare Page Weapons: For his many and

  16. Richard P. Feynman, 1962 | U.S. DOE Office of Science (SC)

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard P. Feynman, 1962 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 1960's Richard P. Feynman, 1962 Print Text Size: A A A FeedbackShare Page Physics: For important

  17. Senior Adviser Richard Kauffman to Host Live Chat on Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and...

  18. Senior Adviser Richard Kauffman to Host Live Chat on Renewable...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and ...

  19. Northern New Mexico College Foundation honors LANL's Richard

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Mexico College Foundation honors LANL's Richard Marquez with leadership, service award October 4, 2012 Northern New Mexico College Foundation honors LANL's Richard Marquez with...

  20. Richard A. Meserve President Emeritus

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A. Meserve President Emeritus rmeserve@carnegiescience.edu June 22, 2015 The Honorable Ernest J. Moniz, Secretary U.S. Department of Energy 1000 Independence Avenue SW Washington, DC 20585 Re: SEAB Task Force Comments on Aligning the Governance Structure of the NNSA Laboratories to Meet 21 st Century National Security Challenges Dear Mr. Secretary: I served as the Chairman of the NAS committee that is the subject of the SEAB comments. I appreciate the endorsement of most of the committee's

  1. Richard L. Talaga | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard L. Talaga Physicist and Group Leader - Precision Muon Physics Richard Talaga leads the HEP Division's Muon Group. He received his PhD from The University of Chicago in 1977 in experimental particle physics and has been active in developing detectors and conducting experiments since that time. Talaga has focused on the study of weakly-interacting particles such as neutrinos and muons. He has attempted to isolate and measure the weak interactions between hadrons and to search for exotic

  2. Richards Barrier LA Reference Design Feature Evaluation

    SciTech Connect

    N.E. Kramer

    1999-11-17

    The Richards Barrier is one of the design features of the repository to be considered for the License Application (LA), Richards was a soil scientist who first described the diversion of moisture between two materials with different hydrologic properties. In this report, a Richards Barrier is a special type of backfill with a fine-grained material (such as sand) overlaying a coarse-grained material (such as gravel). Water that enters an emplacement drift will first encounter the fine-grained material and be transported around the coarse-grained material covering the waste package, thus protecting the waste package from contact with most of the groundwater. The objective of this report is to discuss the benefits and liabilities to the repository by the inclusion of a Richards Barrier type backfill in emplacement drifts. The Richards Barrier can act as a barrier to water flow, can reduce the waste package material dissolution rate, limit mobilization of the radionuclides, and can provide structural protection for the waste package. The scope of this report is to: (1) Analyze the behavior of barrier materials following the intrusion of groundwater for influxes of 1 to 300 mm per year. The report will demonstrate diversion of groundwater intrusions into the barrier over an extended time period when seismic activity and consolidation may cause the potential for liquefaction and settlement of the Richards Barrier. (2) Review the thermal effects of the Richards Barrier on material behavior. (3) Analyze the effect of rockfall on the performance of the Richards Barrier and the depth of the barrier required to protect waste packages under the barrier. (4) Review radiological and heating conditions on placement of multiple layers of the barrier. Subsurface Nuclear Safety personnel will perform calculations to determine the radiation reduction-time relationship and shielding capacity of the barrier. (5) Evaluate the effects of ventilation on cooling of emplacement drifts and

  3. Dr. Richard A. Meserve Covington & Burling LLP 850 Tenth St, NW

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    16, 2016 Dr. Richard A. Meserve Covington & Burling LLP 850 Tenth St, NW Washington, DC 20001-4956 Dr. Joy Rempe 360 Stillwater Idaho Falls, ID 83404 Dear Dr. Meserve and Dr. Rempe: I request that the Nuclear Energy Advisory Committee (NEAC) take appropriate action to direct its International Subcommittee to undertake the following tasks: 1) examine and provide recommendations on how the Office of Nuclear Energy could further support U.S. Government international commercial nuclear energy

  4. Dr. Richard Meserve Covington & Burling LLP 850 Tenth Street, NW

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3, 2016 Dr. Richard Meserve Covington & Burling LLP 850 Tenth Street, NW Washington, D.C. 20001-4956 Dr. Joy Rempe 360 Stillwater Idaho Falls, ID 83404 Dear Dr. Meserve and Dr. Rempe: I request that the Nuclear Energy Advisory Committee's (NEAC's) Nuclear Reactor Technology Subcommittee organize a review of the Department of Energy Office of Nuclear Energy (DOE-NE) draft Vision and Strategy for the Development and Deployment of Advanced Reactors. Given the number of nuclear plant retirements

  5. Richard Gerber Named New NERSC User Services Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Gerber New NERSC User Services Group Lead Richard Gerber Named New NERSC User Services Group Lead December 12, 2013 RichardGerber.jpg Richard Gerber Richard Gerber has been named leader of the NERSC User Services Group (USG), effective immediately. He takes over for Katie Antypas, who was appointed head of the NERSC Services Department in September. In his new role, Gerber will be responsible for managing a group that works to increase the scientific productivity of NERSC's 4,700 users.

  6. Richard Schrock, Robert Grubbs, and Metathesis Method in Organic Synthesis

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Schrock, Robert Grubbs, and Metathesis Method in Organic Synthesis Resources with Additional Information Richard R. Schrock of the Massachusetts Institute of Technology and Robert H. Grubbs of the California Institute of Technology were awarded the 2005 Nobel Prize in Chemistry "for the development of the metathesis method in organic synthesis". Richard R. Schrock Richard R. Schrock Copyright L. Barry Hetherington Robert H. Grubbs Robert H. Grubbs Courtesy California Institute

  7. Microsoft PowerPoint - Sweetnam NG Disc Slides - April 7 2010 final.ppt [Compatibility Mode]

    Gasoline and Diesel Fuel Update

    Gas: U.S. Markets in a Global Context 2010 Energy Conference U.S. Energy Information Administration Johns Hopkins University - SAIS p y April 7, 2010 - Washington, DC Natural Gas: U.S. Markets is a Global Context, April 7, 2010 Richard Newell, March 2, 2010 1 Richard Newell, SAIS, December 14, 2009 1 April 7, 2010 Washington, DC Discussion Outline * Setting the context * Demand/supply outlook for 3 regions - United States United States - OECD Europe - China * Evolution of the global gas market -

  8. Richard Gerber! NERSC Senior Science Advisor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    HPCOR 2014 Enabling Data-Driven Scientific Discovery at DOE National Laboratories --- 1 --- June 1 8, 2 014 --- 2 --- HPCOR 2 014 s eeks t o h elp HPC f acili7es d evelop processes a nd b est p rac7ces f or d elivering systems a nd s ervices that e nable h igh performance data---driven s cien7fic d iscovery at the D OE n a7onal l aboratories. Richard Gerber, NERSC Dave Goodwin, DOE Fernanda Foer;er, ORNL Kevin Harms, ANL Ashley Barker, ORNL Rob Cunningham, LANL Karen Haskell, Sandia Lucy N

  9. NREL Director Richard Truly Announces Retirement Plans - News Releases |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL NREL Director Richard Truly Announces Retirement Plans June 8, 2004 Photo of Richard Truly, Director Golden, Colo. - Vice Admiral Richard H. Truly, director of the Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), today announced that he plans to retire in early November 2004 after more than seven years as NREL's director. Truly became the seventh director of the 27-year-old national laboratory in May 1997. He also serves as executive vice president of Midwest

  10. Sinha and team win Richard P. Feynman Innovation Prize

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard P. Feynman Innovation Prize Sinha and team win Richard P. Feynman Innovation Prize Swept Frequency Acoustic Interferometry was named as the most innovative technology coming out of the Laboratory this year. September 23, 2014 Dipen Sinha displays the innovative technology award presented by the Feynman Center for Innovation. Dipen Sinha displays the innovative technology award presented by the Feynman Center for Innovation. "Richard Feynman was my hero. As a young researcher, he was

  11. Richard DeBlasio - Research Fellow Emeritus | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard DeBlasio - Research Fellow Emeritus Photo of Richard DeBlasio Research Fellows Richard (Dick) DeBlasio is a Research Fellow Emeritus in the Energy Systems Integration (ESI) Directorate, Center for Power Systems Engineering at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL), and a member of the NREL Research Fellows Council that reports to the Science and Technology Deputy Director. He is an expert in renewable electricity, end use systems applications, and

  12. Richard Schrock, Robert Grubbs, and Metathesis Method in Organic...

    Office of Scientific and Technical Information (OSTI)

    Information Richard R. Schrock of the Massachusetts Institute of Technology and Robert H. Grubbs of the California Institute of Technology were awarded the 2005 Nobel Prize in...

  13. Richard Lazarus Named as Executive Director of National Commission...

    Energy Saver

    Georgetown University law professor to serve as the commission's executive director. Richard Lazarus, the Justice William J. Brennan, Jr., Professor of Law at Georgetown, will ...

  14. Richard J. French, Ph.D. | Bioenergy | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard.French@nrel.gov | 303-384-6135 Research Interests Biomass thermal processing Hydrotreating Catalytic pyrolysis Steam reforming to hydrogen Gasification Bench-scale reactors ...

  15. "Plasma stability and burn control" Inventor...--.. Richard J...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Plasma stability and burn control" Inventor...--.. Richard J. Hawryluk, Wayne Solomon ... non-axisymmetric magnetic fields to control the stored energy in the plasma. No.: M-855

  16. Richard Gerber Named New NERSC User Services Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    library support. "Richard is the innovator behind many of NERSC's most popular web services that have been mimicked by HPC centers around the world, including the live...

  17. Northern New Mexico College Foundation honors LANL's Richard...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    LANL's Richard Marquez honored with leadership, service award Northern New Mexico College ... to the advancement of educational and economic opportunities for Northern New Mexico." ...

  18. VWA-0004- In the Matter of Richard W. Gallegos

    Energy.gov [DOE]

    This Decision involves a whistleblower complaint filed by Richard W. Gallegos (Gallegos) under the Department of Energy's (DOE) Contractor Employee Protection Program. Since 1957, Gallegos has been...

  19. change. Constantine, Paul; Field, Richard V., Jr.; Boslough,...

    Office of Scientific and Technical Information (OSTI)

    Statistical surrogate models for prediction of high-consequence climate change. Constantine, Paul; Field, Richard V., Jr.; Boslough, Mark Bruce Elrick 54 ENVIRONMENTAL SCIENCES;...

  20. VBX-0042- In the Matter of Richard R. Sena

    Energy.gov [DOE]

    This Decision supplements an Initial Agency Decision, dated March 1, 2001, in which I found that Sandia Corporation had retaliated against Richard R. Sena in violation of Title 10, Part 708 of the...

  1. VBH-0042- In the Matter of Richard R. Sena

    Energy.gov [DOE]

    This Decision involves a complaint filed by Richard R. Sena (Sena) against Sandia Corporation under the Department of Energy’s Contractor Employee Protection Program. That program is codified at...

  2. TBH-0075- In the Matter of Richard L. Rieckenberg

    Energy.gov [DOE]

    This Initial Agency Decision involves two whistleblower complaints, one filed by Jonathan K. Strausbaugh (Case No. TBH-0073) and the other filed by Richard L. Rieckenberg (Case No. TBH-0075) under...

  3. VBA-0042- In the Matter of Richard Sena

    Energy.gov [DOE]

    This Decision considers an Appeal of an Initial Agency Decision (IAD) issued on March 1, 2001, involving a Complaint filed by Richard Sena (Sena or the Complainant) under the Department of Energy ...

  4. TBH-0063- In the Matter of Richard L. Urie

    Energy.gov [DOE]

    This Decision concerns a Complaint filed by Richard L. Urie (hereinafter referred to as “Mr. Urie” or “the Complainant”) against Los Alamos National Laboratory (hereinafter referred to as “LANL” or...

  5. TBZ-0063- In the Matter of Richard L. Urie

    Energy.gov [DOE]

    This Decision concerns a Complaint filed by Richard L. Urie (hereinafter referred to as “Mr. Urie” or “the Complainant”) against Los Alamos National Laboratory (hereinafter referred to as “LANL” or...

  6. SunShot Summit: Richard Swanson Plenary Session

    Office of Energy Efficiency and Renewable Energy (EERE)

    This video shows Richard Swanson, president emeritus of SunPower, presenting his plenary talk at the DOE SunShot Grand Challenge: Summit and Technology Forum on June 14, 2012.

  7. Richard Truly Named Director of National Renewable Energy Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Truly Named Director of National Renewable Energy Laboratory For more information contact: Kerry Masson 303/275-4083 or 303/880-2246 Golden, Colo., March 25, 1997 -- Admiral Richard H. Truly, former National Aeronautics and Space Administration (NASA) Administrator, today was named Director of the National Renewable Energy Laboratory (NREL) by Midwest Research Institute President and Chief Executive Officer John McKelvey. Midwest Research Institute (MRI) operates and manages NREL for the

  8. From: Lehfeldt, Richard [mailto:RLehfeldt@crowell.com]

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lehfeldt, Richard [mailto:RLehfeldt@crowell.com] Sent: Wednesday, May 06, 2015 4:51 PM To: Exparte Communications Cc: Armstrong, Ashley Subject: Disclosure of Ex Parte Communication TO: United States Department of Energy FROM: Richard Lehfeldt, Crowell & Moring, LLP RE: Ex Parte Communication, May 5, 2015 DATE : May 6, 2015 My firm represents an undisclosed client which manufactures high-end commercial and industrial electronic test and measurement devices. On Tuesday May 5, 2015, at 1 p.m.

  9. Bi-directional dc-dc Converter

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  10. Bi-directional dc-dc Converter

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  11. PPPL Physicist Richard Hawryluk to chair the Nuclear Fusion editorial board

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Princeton Plasma Physics Lab Physicist Richard Hawryluk to chair the Nuclear Fusion editorial board By John Greenwald November 9, 2016 Tweet Widget Google Plus One Share on Facebook Physicist Richard Hawryluk (Photo by Elle Starkman/Office of Communications) Physicist Richard Hawryluk Richard Hawryluk, a distinguished physicist who heads the ITER and Tokamaks department at the U.S. Department of Energy's Princeton Plasma Physics Laboratory (PPPL), has been named chair of the board of

  12. PPPL Physicist Richard Hawryluk to chair the Nuclear Fusion editorial board

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | Princeton Plasma Physics Lab Physicist Richard Hawryluk to chair the Nuclear Fusion editorial board By John Greenwald November 9, 2016 Tweet Widget Google Plus One Share on Facebook Physicist Richard Hawryluk (Photo by Elle Starkman/Office of Communications) Physicist Richard Hawryluk Richard Hawryluk, a distinguished physicist who heads the ITER and Tokamaks department at the U.S. Department of Energy's Princeton Plasma Physics Laboratory (PPPL), has been named chair of the board of

  13. DC source assemblies

    DOEpatents

    Campbell, Jeremy B; Newson, Steve

    2013-02-26

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  14. A Lithium Getter Pump System ---- nventors Richard Majeski, Eugene Kearns,

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and John Schmitt | Princeton Plasma Physics Lab Lithium Getter Pump System ---- nventors Richard Majeski, Eugene Kearns, and John Schmitt This invention is a device to pump volatile gases that bond to lithium in a high vacuum environment. Typically, a crust is formed on lithium getters under the high temperatures and vacuum conditions of fusion experiments. In this invention, electromagnetic stirring of the liquid metal prevents the formation of the crust. Without stirring, the lithium must

  15. Helium Pumping Wall for a Liquid Lithium Tokamak Richard Majeski |

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Princeton Plasma Physics Lab Helium Pumping Wall for a Liquid Lithium Tokamak Richard Majeski This invention is designed to be a subsystem of a device, a tokamak with walls or plasma facing components of liquid lithium. This approach to constructing the lithium-bearing walls of the tokamak allows the wall to fulfill a necessary function -- helium pumping - for which a complex structure was formerly required. The primary novel feature of the invention is that a permeable wall is used to

  16. High Temperature Materials Overview Richard Wright Idaho National Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Temperature Materials Overview Richard Wright Idaho National Laboratory Advanced Reactor Technologies September 17, 2015 Objectives  Provide Technology Development to Support Future Design and Deployment of Very High Temperature Gas Cooled Reactors: - Pressure Vessel - Steam Generator and Intermediate Heat Exchanger (IHX) - Support Codes and Standards Activities for SiC/SiC composites and Materials Handbook  Program Goals - Alloy 617 Code Case Submittal for ASME approval by FY15 allowing

  17. Washington, DC.20585

    Office of Legacy Management (LM)

    Department of ,En&gy Washington, DC.20585 , ' . The Honorable Thomas, Murphy : ,, 414 Grant.Street Pittsburgh, Pennsylvania 15219 Dear Rayor Murphy:. Secretary of Energy ...

  18. Helen He, David Turner, Richard Gerber NUG Monthly Meeting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    David Turner, Richard Gerber NUG Monthly Meeting --- 1 --- NUG M onthly M ee-ng July 1 0, 2 014 Zhengji Zhao " NERSC User Services Group" " NUG Monthly 2014 " July 10, 2014 Edison Issues Since the 6/25 upgrade Upgrades on Edison on 6/25 (partial list) * Maintenance/Configura-on M odifica-ons - set C DT 1 .16 t o d efault * Upgrades on Edison login nodes - SLES 1 1 S P3 - BCM 6 .1 - ESM---XX---3.0.0 - ESL---XC---2.2.0 * Upgrades on main frame - Sonexion u pdate_cs.1.3.1---007

  19. Multilevel DC link inverter

    DOEpatents

    Su, Gui-Jia

    2003-06-10

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  20. TBD-0073 - In the Matter of Richard L. Rieckenberg | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3 - In the Matter of Richard L. Rieckenberg TBD-0073 - In the Matter of Richard L. Rieckenberg Pending before me is a consolidated Motion to Compel Discovery filed with the Office of Hearings and Appeals (OHA) on behalf of Jonathan K. Strausbaugh and Richard L. Rieckenberg (the complainants) by their attorney. This Motion relates to a hearing requested by the complainants under the Department of Energy's Contractor Employee Protection Program, 10 C.F.R. Part 708 (Part 708), in connection with

  1. 10 CFR 850, Request for Information- Docket Number: HS-RM-10-CBDPP- Richard L. Dickson

    Energy.gov [DOE]

    Commenter: Richard L. Dickson 10 CFR 850 - Request for Information Docket Number: HS-RM-10-CBDPP Comment Close Date: 2/22/2011

  2. Katie Antypas, Richard Gerber, Jack Deslippe NUG Monthly Meeting

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Richard Gerber, Jack Deslippe NUG Monthly Meeting --- 1 --- NUG M onthly M ee-ng June 5 , 2 014 NERSC is moving to our new building in 2015!! * Four s tory, 1 40,000 G SF - 300 o ffices o n t wo fl oors - 20K --- > 2 9Ksf H PC fl oor - 12.5MW --- > 4 2 M W t o b uilding * Located for collabora-on - CRD a nd E Snet - UC B erkeley * Excep-onal energy efficiency - Natural a ir a nd w ater c ooling - Heat r ecovery - PUE < 1 .1 - LEED g old d esign 2 ComputaRonal R esearch a nd T heory B

  3. DC attenuation meter

    DOEpatents

    Hargrove, Douglas L.

    2004-09-14

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  4. EIA - Energy Conferences & Presentations.

    Gasoline and Diesel Fuel Update

    EIA Conference 2010 Session 1: U.S. Climate Change Policy: What's Next After Copenhagen? Moderator: Richard Newell, EIA Speakers: Joseph E. Aldy, National Economic Council/Office of Energy and Climate Change Jason Grumet, Bipartisan Policy Center Karen Harbert, U.S. Chamber of Commerce Gina McCarthy, Environmental Protection Agency Moderator and Speaker Biographies Richard Newell, EIA Dr. Richard G. Newell was sworn in on August 3, 2009 as the seventh Administrator of the U.S. Energy

  5. Jerome I. Friedman, Henry W. Kendall, Richard E. Taylor and the Development

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    of the Quark Jerome I. Friedman, Henry W. Kendall, Richard E. Taylor and the Development of the Quark Resources with Additional Information Jerome I. Friedman Jerome I. Friedman Courtesy AIP Emilio Segrè Visual Archives, W. F. Meggers Gallery of Nobel Laureates Richard E. Taylor Richard E. Taylor Courtesy of Stanford Linear Accelerator Center Henry W. Kendall Henry W. Kendall Courtesy AIP Emilio Segrè Visual Archive, W. F. Meggers Gallery of Nobel Laureates The 1990 Nobel Prize in Physics

  6. Richards Equation Solver; Rectangular Finite Volume Flux Updating Solution.

    Energy Science and Technology Software Center

    2002-01-18

    Version: 00 POLYRES solves the transient, two-dimensional, Richards equation for water flow in unsaturated-saturated soils. The package is specifically designed to allow the user to easily model complex polygon-shaped regions. Flux, head, and unit gradient boundary conditions can be used. Spatial variation of the hydraulic properties can be defined across individual polygon-shaped subdomains, called objects. These objects combine to form a polygon-shaped model domain. Each object can have its own distribution of hydraulic parameters. Themore » resulting model domain and polygon-shaped internal objects are mapped onto a rectangular, finite-volume, computational grid by a preprocessor. This allows the user to specify model geometry independently of the underlying grid and greatly simplifies user input for complex geometries. In addition, this approach significantly reduces the computational requirements since complex geometries are actually modeled on a rectangular grid. This results in well-structured, finite difference-like systems of equations that require minimal storage and are very efficient to solve.« less

  7. DC arc weld starter

    DOEpatents

    Campiotti, Richard H. (Tracy, CA); Hopwood, James E. (Oakley, CA)

    1990-01-01

    A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

  8. Redelegation/Designation Order No. 00-022.08A to Richard B. Provencher...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    RedelegationDesignation Order No. 00-022.08A to Richard B. Provencher as Head of Contracting Activity (HCA) for the Idaho Operations Office by johnsonmd Functional areas:...

  9. FIA-14-0029- In the Matter of Richard van Dijk

    Office of Energy Efficiency and Renewable Energy (EERE)

    On June 5, 2014, the Department of Energy’s (DOE) Office of Hearings and Appeals (OHA) denied a Freedom of Information Act Appeal (FOIA) filed by Richard van Dijk (Appellant) of a determination...

  10. Letter from Secretary Samuel Bodman's to President of the Senate Richard

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Cheney suggesting a bill entitled the Nuclear Fuel Management and Disposal Act | Department of Energy Letter from Secretary Samuel Bodman's to President of the Senate Richard Cheney suggesting a bill entitled the Nuclear Fuel Management and Disposal Act Letter from Secretary Samuel Bodman's to President of the Senate Richard Cheney suggesting a bill entitled the Nuclear Fuel Management and Disposal Act The Nuclear Fuel Management and Disposal Act bill contains a number of provisions to

  11. D.C.

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Future scientists advance to national level April 3, 2012 Science Bowl winners represent NM in Washington, D.C. A team from Los Alamos bested 39 other teams from around New Mexico in the 10- hour New Mexico Regional Science Bowl, held recently at Albuquerque Academy. The team went on to represent New Mexico in the 22nd Annual Department of Energy (DOE) National Science Bowl. In addition to their travel expenses, the team also won $5,000 for their school. The team consists of students, Alexander

  12. Auxiliary resonant DC tank converter

    DOEpatents

    Peng, Fang Z.

    2000-01-01

    An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

  13. Improved DC Gun Insulator

    SciTech Connect

    M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

    2009-05-01

    Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

  14. DC Wafers | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Wafers Jump to: navigation, search Name: DC Wafers Place: Leon, Spain Product: Spanish manufacturer of multicrystalline silicon wafers. Planning a 30MW wafer slicing line in Leon,...

  15. 2013 Federal Energy and Water Management Award Winners Bob Bellagh, Richard

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Eschenbach, Edward J. Hernaez, Kieran McInerney, and Laura Smolinski | Department of Energy Bob Bellagh, Richard Eschenbach, Edward J. Hernaez, Kieran McInerney, and Laura Smolinski 2013 Federal Energy and Water Management Award Winners Bob Bellagh, Richard Eschenbach, Edward J. Hernaez, Kieran McInerney, and Laura Smolinski fewm13_coastguard_highres.pdf (4.03 MB) fewm13_coastguard.pdf (461.37 KB) More Documents & Publications U.S. Coast Guard and Florida Power and Light Successfully

  16. Triple voltage dc-to-dc converter and method

    DOEpatents

    Su, Gui-Jia

    2008-08-05

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  17. About EIA - History - U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update

    Previous Administrators Richard Newell Guy Caruso Jay Hakes Calvin Kent Richard Newell 2009-2011 Guy Caruso 2002-2008 Jay Hakes 1993-2000 Calvin Kent 1990-1993 Helmut Merklein Erich Evered Lincoln Moses Helmut Merklein 1985-1990 Erich Evered 1981-1984 Lincoln Moses 1978-1980

  18. Bi-Directional DC-DC Converter for PHEV Applications

    SciTech Connect

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  19. Washington DC | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    DC Home Linked Open Data Workshop in Washington, D.C. Description: A group organizing the LOD workshop in Washington, D.C. in fall 2012 A follow-up event to the successful LOD...

  20. D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    D.C. Home Kyoung's picture Submitted by Kyoung(150) Contributor 6 September, 2012 - 08:51 GRR Update Meeting scheduled for 913 in D.C. D.C. GRR meeting update The next Geothermal...

  1. Good Energies (Washington DC) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Good Energies (Washington DC) Name: Good Energies (Washington DC) Address: 1250 24th St., NW, Suite 250 Place: Washington, District of Columbia Zip: 20037 Product: Global investor...

  2. DC Pro Software Tool Suite

    SciTech Connect

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  3. Catalog of DC Appliances and Power Systems

    SciTech Connect

    Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

    2010-10-13

    This document catalogs the characteristics of current and potential future DC products and power systems.

  4. Microsoft PowerPoint - Programmatic Update Nuclear Material Landscape_Richard Meehan [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Programmatic Update - Nuclear Materials Landscape Richard Meehan, Director Office of Nuclear Material Integration (ONMI) NNSA Purpose  Provide an update on range of programmatic activities focused on: - Nuclear materials management and integration - Decision-making needs and stakeholders - Recent NMMSS developments  Highlight learning opportunities at NMMSS 2015 2 ONMI Programmatic Focus  Material management policy, plans, and expectations  Analysis and integration of DOE/NNSA-wide

  5. The Faces of Energy: Richard Kauffman's Journey From The Oil Crisis to Clean Tech

    Energy.gov [DOE]

    One of the country's leading experts on private sector investment in clean energy, Richard Kauffman is joining the Energy Department as a Senior Advisor. It's also his first in the public sector – a fact that humbles Kauffman: “For me this is my opportunity to serve. My hope is that I will bring capabilities and experience that are complementary to the great talent that is already here.”

  6. Light-weight DC to very high voltage DC converter

    DOEpatents

    Druce, Robert L.; Kirbie, Hugh C.; Newton, Mark A.

    1998-01-01

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current.

  7. Light-weight DC to very high voltage DC converter

    DOEpatents

    Druce, R.L.; Kirbie, H.C.; Newton, M.A.

    1998-06-30

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

  8. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    DOEpatents

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  9. DC systems with transformerless converters

    SciTech Connect

    Vithayathil, J.J.; Mittlestadt, W.; Bjoerklund, P.E.

    1995-07-01

    A technical and economic feasibility study of HVDC systems without converter transformers is presented. The presentation includes proposed solutions to the drawback related to the absence of galvanic separation between the ac and dc systems, if the converter transformers are eliminated. The results show that HVDC systems without converter transformers are both technically and economically feasible. The cost savings can be substantial.

  10. Richard Gerber!

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Senior Science Advisor to the Director! NERSC Data-Driven Science at NERSC --- 1 --- August 8 , 2 013 New Community Focus on Data --- 2 --- DOE has extreme data needs --- 3 --- Light Sources * Many d etectors o n M oore's L aw c urve * Data v olumes r endering p revious o pera=onal m odels o bsolete High Energy Physics * LHC E xperiments p roduce a nd d istribute p etabytes o f d ata/year * Astro: p eak d ata r ates i ncrease 3 ---5x o ver 5 y ears, T B o f d ata p er n ight Genomics * Sequencer

  11. Richard Lagdon

    Energy.gov [DOE]

    Mr. Lagdon was appointed Chief of Nuclear Safety for Energy in January 2006. In this role, he is responsible for nuclear safety of 120 nuclear facilities under the purview of the Under Secretary...

  12. Richard Shaheen

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Volume One Film Collection Volume Two 75th Anniversary Hydropower in the Northwest Woody Guthrie Videos Strategic Direction Branding & Logos Power of the River History Book...

  13. DC to DC power converters and methods of controlling the same

    DOEpatents

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  14. ARM - Campaign Instrument - dc8-nasa

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ...strumentsdc8-nasa Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : NASA DC-8 (DC8-NASA) Instrument Categories ...

  15. What is the deal with DC Microgrids?

    Energy Saver

    2015 Acuity Brands What is the deal with DC Microgrids? and why would a Lighting company care? Yan Rodriguez VP Product and Technology 2015 Acuity Brands * Why DC Microgrids? *...

  16. Ecological benefits of dc power transmission

    SciTech Connect

    Kutuzova, N. B.

    2011-05-15

    The environmental effects of dc overhead transmission lines are examined. The major effects of ac and dc transmission lines are compared. Dc lines have advantages compared to ac lines in terms of electrical safety for people under the lines, biological effects, corona losses, and clearance width.

  17. EA-377 DC Energy Texas LLC | Department of Energy

    Energy Saver

    7 DC Energy Texas LLC EA-377 DC Energy Texas LLC Order authorizing DC Energy Texas LLC to export electric energy to Mexico. PDF icon EA-377 DC Energy Texas LLC More Documents & ...

  18. Active dc filter for HVDC systems

    SciTech Connect

    Zhang, W. ); Asplund, G.

    1994-01-01

    This article is a case history of the installation of active dc filters for high-performance, low-cost harmonics filtering at the Lindome converter station in the Konti-Skan 2 HVDC transmission link between Denmark and Sweden. The topics of the article include harmonics, interference, and filters, Lindome active dc filter, active dc filter design, digital signal processor, control scheme, protection and fault monitoring, and future applications.

  19. Simultaneous distribution of AC and DC power

    SciTech Connect

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  20. SSL Demonstration: Parking Garage Lighting, Washington, DC

    SciTech Connect

    2013-06-01

    GATEWAY program report brief summarizing an SSL parking garage demonstration at the Dept. of Labor headquarters parking garage in Washington, DC.

  1. Glass Ceramic Dielectrics for DC Bus Capacitors

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  2. Washington, D.C. Office | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Office NREL's Washington, D.C. office provides energy analysis and technical program support to the U.S. Department of Energy. View Larger Map National Renewable Energy Laboratory - D.C. Office 901 D Street, SW (also 370 L'Enfant Promenade, adjacent to the Forrestal building) Suite 930 Washington, D.C., 20024 202-488-2200 D.C. Visitor Information See local information to plan your trip. Security Procedures Building security will accept HSPD-12 badges (recognizable by gold chip on front) or valid

  3. Before the Senate Energy and Natural Resources Committee | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Richard Newell, Administrator Energy Information Administration Subject: Annual Energy Outlook AEO2011_Newell_SENR_Testimony_2 03_11final revised (318.58 KB) More Documents & Publications Before the House Natural Resources Committee Before the House Energy and Commerce Subcommittee on Energy and Power Before the House Energy and Commerce Subcommittee on Energy and Power

  4. High voltage DC power supply

    DOEpatents

    Droege, T.F.

    1989-12-19

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

  5. High voltage DC power supply

    DOEpatents

    Droege, Thomas F.

    1989-01-01

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

  6. DC-based magnetic field controller

    DOEpatents

    Kotter, Dale K.; Rankin, Richard A.; Morgan, John P,.

    1994-01-01

    A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

  7. DC-based magnetic field controller

    DOEpatents

    Kotter, D.K.; Rankin, R.A.; Morgan, J.P.

    1994-05-31

    A magnetic field controller is described for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a Hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage. 1 fig.

  8. Washington, D.C. Roundtable Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington, D.C. Roundtable Summary Washington, D.C. Roundtable Summary Summary of the DOE Office of Indian Energy roundtable held March 30, 2011, in Washington, D.C. PDF icon ...

  9. EA-327-A DC Energy, LLC | Department of Energy

    Energy.gov [DOE] (indexed site)

    DC Energy to export electric energy to Canada. EA-327-A DC Energy.pdf More Documents & Publications Application to Export Electric Energy OE Docket No. EA-327-A DC Energy, LLC...

  10. The Scientific Publications of Richard H. Dalitz, FRS (1925-2006)

    SciTech Connect

    Aitchison, Ian J.R.; Close, Frank E.; Gal, Avraham; Millener, D.John

    2006-03-29

    Professor Richard H. Dalitz passed away on January 13, 2006. He was almost 81 years old and his outstanding contributions are intimately connected to some of the major breakthroughs of the 20th century in particle and nuclear physics. These outstanding contributions go beyond the Dalitz Plot, Dalitz Pair and CDD poles that bear his name. He pioneered the theoretical study of strange baryon resonances, of baryon spectroscopy in the quark model, and of hypernuclei, to all of which he made lasting contributions. His formulation of the ''{theta} - {tau} puzzle'' led to the discovery that parity is not a symmetry of the weak interactions. A brief scientific evaluation of Dalitz's major contributions to particle and nuclear physics is hereby presented, followed by the first comprehensive list of his scientific publications, as assembled from several sources. The list is divided into two categories: the first, main part comprises Dalitz's research papers and reviews, including topics in the history of particle physics, biographies and reminescences; the second part lists book reviews, public lectures and obituaries authored by Dalitz, and books edited by him. This provides the first necessary step towards a more systematic research of the Dalitz heritage in modern physics.

  11. Report Now Available: DC Microgrids Scoping Study--Estimate of...

    Office of Environmental Management (EM)

    Report Now Available: DC Microgrids Scoping Study--Estimate of Technical and Economic Benefits (March 2015) Report Now Available: DC Microgrids Scoping Study--Estimate of Technical ...

  12. AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Testing Reports DC Fast Charge Impacts on Battery Life and Vehicle Performance INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems

  13. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging ...

  14. Washington, D.C. and Indiana: Allison Hybrid Technology Achieves...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington, D.C. and Indiana: Allison Hybrid Technology Achieves Commercial Success Washington, D.C. and Indiana: Allison Hybrid Technology Achieves Commercial Success August 21,...

  15. Maryland DC Virginia Solar Energy Industries Association MDV...

    OpenEI (Open Energy Information) [EERE & EIA]

    DC Virginia Solar Energy Industries Association MDV SEIA Jump to: navigation, search Name: Maryland-DC-Virginia Solar Energy Industries Association (MDV-SEIA) Place: Bethesda,...

  16. Multilevel cascade voltage source inverter with seperate DC sources...

    Office of Scientific and Technical Information (OSTI)

    Multilevel cascade voltage source inverter with seperate DC sources Citation Details In-Document Search Title: Multilevel cascade voltage source inverter with seperate DC sources ...

  17. Multilevel cascade voltage source inverter with seperate DC sources...

    Office of Scientific and Technical Information (OSTI)

    Multilevel cascade voltage source inverter with seperate DC sources Citation Details In-Document Search Title: Multilevel cascade voltage source inverter with seperate DC sources A ...

  18. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Low Cost, High Temperature, High Ripple Current DC Bus Capacitors Low Cost, High Temperature, High Ripple Current DC Bus Capacitors 2010 DOE Vehicle Technologies and Hydrogen...

  19. Logan Daum > Analyst - DC Energy > Center Alumni > The Energy...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Logan Daum Analyst - DC Energy lrd56@cornell.edu Formerly a graduate student with the Fennie Group, Logan joined DC Energy in June of 2013...

  20. Microsoft PowerPoint - 3_Richard Meehan_Monday_NMMSS_2014_Powerpoint_TEMPLATE.ppt [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Radiological Protection and Nonproliferation A NMMSS Perspective Richard W. Meehan Acting Director, Office of Nuclear Material Integration National Nuclear Security Administration U.S. Department of Energy Topics to Discuss  Significance of NMMSS Data  The IAEA Connection  Importance of Accurate Nuclear Material Inventories 2 Significance of NMMSS Data  The U.S. must be an example of compliance - Timely and accurate inventory reporting  Data Customers - U.S Department of State,

  1. Microsoft PowerPoint - Dynamics Complexities Accounting for Foreign Obligated Unobligated_Richard Meehan_Mitch Hembree [Compati

    National Nuclear Security Administration (NNSA)

    Dynamics and Complexities of Accounting for Foreign Obligated and Unobligated Nuclear material Richard Meehan Mitch Hembree NNSA NMMSS Purpose 2 * Accurate tracking of foreign obligated material in the U.S. is vital to U.S. national security. * 123 Agreements provide country-specific provisions for tracking material, equipment, and components. These may include limitations on use and re-transfers. * This presentation covers the analytical framework used to account for obligated and unobligated

  2. DC High School Science Bowl Regionals

    Energy.gov [DOE]

    This event is the Washington, D.C. High School Regional competition for the US National Science Bowl. The regional competition is run by the Office of Economic Impact and Diversity, and the...

  3. Microsoft Word - ivanova-dc.doc

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    the large, small and very small modes (named here as mode 3, 2, and 1). Figure 7. Mean dimension measured by the 2DC vs. temperature for this study (CEPEX). Vertical bars are...

  4. Improved DC Gun Insulator Assembly

    SciTech Connect

    Sah, R.; Dudas, A.; Neubauer, M. L.; Poelker, M.; Surles-Law, K. E.L.

    2010-05-23

    Many user fa­cil­i­ties such as syn­chrotron ra­di­a­tion light sources and free elec­tron lasers re­quire ac­cel­er­at­ing struc­tures that sup­port elec­tric fields of 10-100 MV/m, es­pe­cial­ly at the start of the ac­cel­er­a­tor chain where ce­ram­ic in­su­la­tors are used for very high gra­di­ent DC guns. These in­su­la­tors are dif­fi­cult to man­u­fac­ture, re­quire long com­mis­sion­ing times, and often ex­hib­it poor re­li­a­bil­i­ty. Two tech­ni­cal ap­proach­es to solv­ing this prob­lem will be in­ves­ti­gat­ed. First­ly, in­vert­ed ce­ram­ics offer so­lu­tions for re­duced gra­di­ents be­tween the elec­trodes and ground. An in­vert­ed de­sign will be pre­sent­ed for 350 kV, with max­i­mum gra­di­ents in the range of 5-10 MV/m. Sec­ond­ly, novel ce­ram­ic man­u­fac­tur­ing pro­cess­es will be stud­ied, in order to pro­tect triple junc­tion lo­ca­tions from emis­sion, by ap­ply­ing a coat­ing with a bulk re­sis­tiv­i­ty. The pro­cess­es for cre­at­ing this coat­ing will be op­ti­mized to pro­vide pro­tec­tion as well as be used to coat a ce­ram­ic with an ap­pro­pri­ate gra­di­ent in bulk re­sis­tiv­i­ty from the vac­u­um side to the air side of an HV stand­off ce­ram­ic cylin­der. Ex­am­ple in­su­la­tor de­signs are being com­put­er mod­elled, and in­su­la­tor sam­ples are being man­u­fac­tured and test­ed

  5. EA-351 DC Energy Dakota, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    51 DC Energy Dakota, LLC EA-351 DC Energy Dakota, LLC Order authorizing DC Energy Dakota, LLC to export electric energy to Canada EA-351 DC Energy Dakota, LLC (383.98 KB) More Documents & Publications Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC EA-344 Twin Cities Power-Canada, LLC EA-354 Endure Energy, L.L.C.

  6. Glass Ceramic Dielectrics for DC Bus Capacitors | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Glass Ceramic Dielectrics for DC Bus Capacitors Glass Ceramic Dielectrics for DC Bus Capacitors 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ape010_lanagan_2012_p.pdf (486.5 KB) More Documents & Publications Glass Ceramic Dielectrics for DC Bus Capacitors Glass Dielectrics for DC Bus Capacitors Glass Ceramic Dielectrics for DC Bus Capacitors

  7. Halbach array DC motor/generator

    DOEpatents

    Merritt, Bernard T.; Dreifuerst, Gary R.; Post, Richard F.

    1998-01-01

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  8. Halbach array DC motor/generator

    DOEpatents

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  9. DC multi-infeed study. Final report

    SciTech Connect

    Szechtman, M.; Pilotto, L.A.S.; Ping, W.W.; Salgado, E.; Dias de Carvalho, A.R.C.; Long, W.F.; Alvarado, F.L.; DeMarco, C.L.; Canizares, C.A.; Wey, A.

    1994-12-01

    An HVdc multiconverter configuration results when more than one converter station is located within the same electrical region. Such a situation will be a natural consequence of the growing use of the HVdc technology. Relevant questions relating to multiconverter configurations have been analyzed in the scope of this research project. In particular, special emphasis has been devoted to the HVdc inverter multiinfeed schemes, since such a situation will be more commonly found in future applications and usually results in the most severe ac/dc interactions. The main purpose of this project is to present a general insight into the potential problems resulting from multiinfeed HVdc operation, using networks based on realistic power system configurations. Power system studies have been performed using several digital (Load-Flow, Transient Stability, Eigenvalue and EMTP programs) and analog (DC Simulator) tools in a complementary basis to investigate both low and high frequency interaction phenomena. The project was conducted to evaluate the technical aspects of the various ac/dc and dc/dc interactions. It addressed small signal stability, an overview of the entire system transient and dynamic stability, some aspects of the ac voltage stability problem and HVdc control stability including the effects of the VDCOL units and possible occurrence of commutation failures at inverter stations after recovery from faults. This report identifies the potential problems resulting from multiinfeed situations and proposes practical solutions. It also presents a survey on how the various HVdc system controllers can be coordinated to provide the interconnected ac system with an improved dynamic performance, a high level of operational flexibility and the maximization of the overall system loadability.

  10. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    SciTech Connect

    Marlino, Laura D; Zhu, Lizhi

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  11. PowerCentsDC Program Final Report | Department of Energy

    Energy Saver

    PowerCentsDC Program Final Report In 2007 the Smart Meter Pilot Program Inc initiated PowerCentsDC to test the reactions and impacts on consumer behavior of smart prices, smart ...

  12. Global DC Power System Market Analysis | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    either positive or negative. It can be powered from an AC or DC source. A basic DC power system consists of a transformer, a rectifier, a filter, and a regulator. All these...

  13. Global DC Power System Market Growth | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    either positive or negative. It can be powered from an AC or DC source. A basic DC power system consists of a transformer, a rectifier, a filter, and a regulator. All these...

  14. Global DC Power System Market Space | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    either positive or negative. It can be powered from an AC or DC source. A basic DC power system consists of a transformer, a rectifier, a filter, and a regulator. All these...

  15. Washington DC Regions | U.S. DOE Office of Science (SC)

    Office of Science (SC)

    for your school's state, county, city, or district. For more information, please visit the Middle School Coach page. Washington, DC Region Middle School Regional Washington, DC DC...

  16. Washington DC Regions | U.S. DOE Office of Science (SC)

    Office of Science (SC)

    school's state, county, city, or district. For more information, please visit the High School Coach page. Washington, DC Region High School Regional Washington, DC Washington, DC...

  17. Categorical Exclusion Determinations: Washington, D.C. | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Washington, D.C. Categorical Exclusion Determinations: Washington, D.C. Location Categorical Exclusion Determinations issued for actions in Washington, D.C. DOCUMENTS AVAILABLE FOR DOWNLOAD August 15, 2016 CX-100670 Categorical Exclusion Determination Boosting Energy Efficiency and Economic Development Through Chambers of Commerce Award Number: DE-EE0007557 CX(s) Applied: A9, A11 Building Technologies Program Date: 7/26/2016 Location(s): DC Office(s): Golden Field Office January 20,

  18. Energy Training Session for DC Elementary School Teachers

    Energy.gov [DOE]

    Are you an elementary school teacher in Washington, DC, looking for creative ideas to introduce energy curriculum to your students?

  19. DC Survey 2013 | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Management / Aerial Measuring System DC Survey 2013 DC Background Survey (.zip) DC 2013 survey Related Topics ams Emergency Response Related News NNSA stays prepared with world-class response units Department of Energy's chief risk officer visits Nevada National Security Site NNSA sites prepared for disasters using real-time response management system NNSA emergency response assets highlighted NNSA displays helicopter in Baltimore

  20. EA-377 DC Energy Texas | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    7 DC Energy Texas EA-377 DC Energy Texas Order authorizing DC Energy Texas to export electric energy to Mexico. EA-377 DCE Texas Order.pdf (1.96 MB) More Documents & Publications Application to export electric energy OE Docket No. EA-377 Alston&Bird LLP EA-403 Frontera Marketing,

  1. Energy Challenge Two: The WeatherizeDC Campaign

    Energy.gov [DOE]

    WeatherizeDC is a campaign of The DC Project, a nonprofit based in Washington, D.C., founded by former leaders of the Obama for America campaign around a mission to advance economic and environmental justice by creating clean energy career opportunities for people who need them most.

  2. Q&A: Kristen Psaki of WeatherizeDC

    Energy.gov [DOE]

    Roughly 20 percent of carbon emissions come from inefficient homes. The DC Project says it has found a way to mitigate emissions and create jobs, a winning combination. WeatherizeDC is the non-profit’s effort to use a community engagement model to help DC residents find green jobs and live a more energy efficient lifestyle.

  3. Recovery Act State Memos Washington, DC

    Energy.gov [DOE] (indexed site)

    Washington, DC For questions about DOE's Recovery Act activities, please contact the DOE Recovery Act Clearinghouse: 1-888-DOE-RCVY (888-363-7289), Monday through Friday, 9 a.m. to 7 p.m. Eastern Time https://recoveryclearinghouse.energy.gov/contactUs.htm. All numbers and projects listed as of June 1, 2010 TABLE OF CONTENTS RECOVERY ACT SNAPSHOT................................................................................... 1 FUNDING ALLOCATION

  4. DC side filters for multiterminal HVDC systems

    SciTech Connect

    Shore, N.L.; Adamson, K.; Bard, P.

    1996-10-01

    Multiterminal HVDC systems present challenges in the specification and design of suitable dc side filtering. This document examines the existing experience and addresses the particular technical problems posed by multiterminal systems. The filtering requirements of small taps are discussed, as is the potential use of active filters. Aspects of calculation and design are considered and recommendations made to guide the planners and designers of future multiterminal schemes.

  5. AVTA: Hasdec DC Fast Charging Testing Results

    Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following report describes results from testing done on the Hasdec DC fast charging system for plug-in electric vehicles. This research was conducted by Idaho National Laboratory.

  6. DC dielectric characteristics and conception of insulation design for DC GIS

    SciTech Connect

    Hasegawa, T.; Yamaji, K.; Hatano, M.; Aoyagi, H.; Taniguchi, Y.; Kobayashi, A.

    1996-10-01

    In order to discuss the dielectric performance of DC GIS, the flashover characteristics of gas-insulated bus were studied under conical- and disk-type spacers. The test involves the investigation on effect of electrification for charge to be accumulated in spacers and the effect of metallic particles. As the result, it was found that the dielectric characteristics of conical-type spacer are better than disk type. Moreover, the dielectric performance of DC GIS is more affected by the characteristics of coaxial electrode system than spacer surface with regard to metallic particle. On the basis of the results of these tests, this report presents the conception of insulation design for DC GIS.

  7. A High Power Density DC-DC Converter for Distributed PV Architectures

    SciTech Connect

    Mohammed S. Agamy; Song Chi; Ahmed Elasser; Maja Harfman-Todorovic; Yan Jiang; Frank Mueller; Fengfeng Tao

    2012-06-01

    In order to maximize solar energy harvesting capabilities, power converters have to be designed for high efficiency and good MPPT and voltage/current performance. When many converters are used in distributed systems, power density also becomes an important factor as it allows for simpler system integration. In this paper a high power density string dc-dc converter suitable for distributed medium to large scale PV installation is presented. A simple partial power processing topology, implemented with all silicon carbide devices provides high efficiency as well as high power density. A 3.5kW, 100kHz converter is designed and tested to verify the proposed methods.

  8. DC-DC Converter Topology Assessment for Large Scale Distributed Photovoltaic Plant Architectures

    SciTech Connect

    Agamy, Mohammed S; Harfman-Todorovic, Maja; Elasser, Ahmed; Sabate, Juan A; Steigerwald, Robert L; Jiang, Yan; Essakiappan, Somasundaram

    2011-07-01

    Distributed photovoltaic (PV) plant architectures are emerging as a replacement for the classical central inverter based systems. However, power converters of smaller ratings may have a negative impact on system efficiency, reliability and cost. Therefore, it is necessary to design converters with very high efficiency and simpler topologies in order not to offset the benefits gained by using distributed PV systems. In this paper an evaluation of the selection criteria for dc-dc converters for distributed PV systems is performed; this evaluation includes efficiency, simplicity of design, reliability and cost. Based on this evaluation, recommendations can be made as to which class of converters is best fit for this application.

  9. Improved DC Gun and Insulator Assembly

    SciTech Connect

    Neubauer, Michael; Johnson, Rolland P

    2015-01-11

    Many user facilities such as synchrotron radiation light sources and free electron lasers rely on DC high voltage photoguns with internal field gradients as high as 10 to 15 MV/m. These high gradients often lead to field emission which poses serious problems for the photocathode used to generate the electron beam and the ceramic insulators used to bias the photocathode at high voltage. Ceramic insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic causing a buildup of charge and eventual puncture, and also because large diameter ceramics are difficult to braze reliably. The lifetimes of photo cathodes inside high current DC guns exhibiting field emission are limited to less than a hundred hours. Reducing the surface gradients on the metals reduces the field emission, which serves to maintain the required ultrahigh vacuum condition. A novel gun design with gradients around 5 MV/m and operating at 350 kV, a major improvement over existing designs, was proposed that allows for the in-situ replacement of photo cathodes in axially symmetric designs using inverted ceramics. In this project, the existing JLAB CEBAF asymmetric gun design with an inverted ceramic support was modeled and the beam dynamics characterized. An improved structure was designed that reduces the surface gradients and improves the beam optics. To minimize the surface gradients, a number of electrostatic gun designs were studied to determine the optimum configuration of the critical electrodes within the gun structure. Coating experiments were carried out to create a charge dissipative coating for cylindrical ceramics. The phase II proposal, which was not granted, included the design and fabrication of an axially symmetric DC Gun with an inverted ceramic that would operate with less than 5 MV/m at 350 kV and would be designed with an in-situ replaceable photo-cathode.

  10. Fun D.C. Jobs for Physicists

    SciTech Connect

    Clark Cully

    2009-09-30

    Physicists make valuable contributions in a wide variety of careers, including those in Washington. Many national challenges, including energy, innovation, and security, create a demand for technically-competent individuals across government. Clark will discuss some of the many programs in D.C. designed to attract the best and brightest minds, from grad-students to professors, from short-term assignments to whole new careers. These are great opportunities to use your expertise and enrich your knowledge of the broader scientific enterprise, all while serving society.

  11. National Press Club Washington, D.C.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Is the Energy Race our new "Sputnik" Moment? National Press Club Washington, D.C. 29 November, 2010 1 October 4, 1957, the Soviet Union placed a 184 pound satellite into orbit. "The Soviet Union now has - in the combined category of scientists and engineers - a greater number than the United States. And it is producing graduates in these fields at a much faster rate ... This trend is disturbing. Indeed, according to my scientific advisers, this is for the American people the most

  12. Architectures and Control of Submodule Integrated DC-DC Converters for Photovoltaic Applications

    SciTech Connect

    Olalla, C; Clement, D; Rodriguez, M; Maksimovic, D

    2013-06-01

    This paper describes photovoltaic (PV) module architectures with parallel-connected submodule-integrated dc-dc converters (subMICs) that improve efficiency of energy capture in the presence of partial shading or other mismatch conditions. The subMICs are bidirectional isolated dc-dc converters capable of injecting or subtracting currents to balance the module substring voltages. When no mismatches are present, the subMICs are simply shut down, resulting in zero insertion losses. It is shown that the objective of minimum subMIC power processing can be solved as a linear programming problem. A simple close-to-optimal distributed control approach is presented that allows autonomous subMIC control without the need for a central controller or any communication among the subMICs. Furthermore, the proposed control approach is well suited for an isolated-port architecture, which yields additional practical advantages including reduced subMIC power and voltage ratings. The architectures and the control approach are validated by simulations and experimental results using three bidirectional flyback subMICs attached to a standard 180-W, 72-cell PV module, yielding greater than 98% module-level power processing efficiency for a mismatch less than 25%.

  13. Energy Incentive Programs, Washington DC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington DC Energy Incentive Programs, Washington DC Updated October 2015 What public-purpose-funded energy efficiency programs are available in the District of Columbia? In 2008, the Council of the District of Columbia passed the Clean and Affordable Energy Act (CAEA), establishing the DC Sustainable Energy Utility (DCSEU), whose mission is to provide energy assistance to low-income residents and support energy efficiency and renewable energy programs. The DCSEU, funded by the Sustainable

  14. DC OPC Comments. September 17, 2010 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    OPC Comments. September 17, 2010 DC OPC Comments. September 17, 2010 Comments of the office of peoples counsel, washington DC in response to the department of energy's request for information concerning smart grid issues. DC OPC Comments. September 17, 2010 (104.21 KB) More Documents & Publications Addressing Policy and Logistical Challenges to smart grid Implementation: eMeter Response to Department of Energy RFI Comments of DRSG to DOE Smart Grid RFI: Addressing Policy and Logistical

  15. Fault Detection and Isolation in Low-Voltage DC Distribution...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Find More Like This Return to Search Fault Detection and Isolation in Low-Voltage DC Distribution System University of Colorado Contact CU About This Technology Publications: PDF ...

  16. PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL LABORATORIES Jay Johnson 1 , ... ) added Article 690.11 that requires photovoltaic (PV) systems on or penetrating a ...

  17. Energy Department Completes Cool Roof Installation on DC Headquarters...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Headquarters Building to Save Money by Saving Energy Energy Department Completes Cool Roof Installation on DC Headquarters Building to Save Money by Saving Energy December 14, ...

  18. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  19. Washington DC Reliability Requirements and the Need to Operate...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability (Oak Ridge National Laboratory 2005) ...

  20. DC Resistivity Survey (Schlumberger Array) At Raft River Geothermal...

    OpenEI (Open Energy Information) [EERE & EIA]

    Raft River Geothermal Area (1974-1975) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Schlumberger Array) At Raft River...

  1. Persons Who Received the DC PSC's Emergency Petition and Complaint...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ("DC PSC") Emergency Petition Comments on Department of Energy's Emergency Order To Resume Limited Operation at Mirant's Potomac River Generating Station and Proposed Mirant ...

  2. VA-MD-DC Hydrogen Education for Decision Makers

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  3. DC Fast Charge Impacts on Battery Life and Vehicle Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing AVTA: 2011 Honda CRZ HEV Testing Results AVTA: 2011 ...

  4. A Segmented Drive System with a Small DC Bus Capacitor

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  5. DC Resistivity Survey (Dipole-Dipole Array) At Coso Geothermal...

    OpenEI (Open Energy Information) [EERE & EIA]

    Coso Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Dipole-Dipole Array) At Coso Geothermal Area...

  6. Washington DC's First Electric Vehicle Charging Station | Department...

    Energy.gov [DOE] (indexed site)

    Street signage for Washington, DC's first electric vehicle charging station located on the northwest corner of the intersection of U and 14th streets. | Department of Energy Photo ...

  7. Grid-Interactive Electric Vehicle DC-Link Photovoltaic Charging...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Find More Like This Return to Search Grid-Interactive Electric Vehicle DC-Link Photovoltaic Charging System University of Colorado Contact CU About This Technology Publications: ...

  8. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  9. Focus on Advancing High Performance Mass Spectrometry, Honoring Dr. Richard D. Smith, Recipient of the 2013 Award for a Distinguished Contribution in Mass Spectrometry

    SciTech Connect

    Baker, Erin Shammel; Muddiman, David C.; Loo, Joseph

    2014-12-01

    This special focus issue of the Journal of the American Society for Mass Spectrometry celebrates the accomplishments of Dr. Richard D. Smith, the recipient of the 2013ASMS Award for a Distinguished Contribution in Mass Spectrometry, and who serves as a Battelle Fellow, Chief Scientist in the Biological Sciences Division, and Director of Proteomics Research at Pacific Northwest National Laboratory (PNNL) in Richland, WA. The award is for his development of the electrodynamic ion funnel.

  10. Secretary of Energy Advisory Board Public Meeting Committee Members: John Deutch, Chair; Arun Majumdar, Vice Chair; Richard A. Meserve; Rafael L.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Arun Majumdar, Vice Chair; Richard A. Meserve; Rafael L. Bras; Deborah Jin; Michael McQuade; Francis Beinecke; Cherry Murray; Ram Shenoy Date and Time: June 17, 2015, 8:30 AM - 11:30 AM EST Location: Applied Research Center, Garden Room, 301 Gateway Drive, Aiken, SC Purpose: Meeting of the Secretary of Energy Advisory Board (SEAB) SEAB Staff: Karen Gibson, Designated Federal Officer; Corey Williams-Allen, Deputy Designated Federal Officer; Matthew Schaub, Deputy Director DOE Staff: Secretary

  11. Microsoft PowerPoint - NMMSS Strategy_Analytical Approach for Validating the Accuracy Of Nuclear Material Data_Richard Meehan_M

    National Nuclear Security Administration (NNSA)

    Strategy and Analytical Approach for Validating the Accuracy Of Nuclear Material Data Mitch Hembree NMMSS Richard Meehan NNSA Purpose  NMMSS Provides information and data of significance to the U.S. Government.  Data integrity is of paramount importance.  This presentation provides an overview of NMMSS strategy and analytical approach to data validation. 2 Context Validation and verification of NMMSS data are critical in the ability to provide high quality, accurate and complete

  12. Development of a Novel Bi-Directional Isolated Multiple-Input DC-DC Converter

    SciTech Connect

    Li, H.

    2005-10-24

    There is vital need for a compact, lightweight, and efficient energy-storage system that is both affordable and has an acceptable cycle life for the large-scale production of electric vehicles (EVs) and hybrid electric vehicles (HEVs). Most of the current research employs a battery-storage unit (BU) combined with a fuel cell (FC) stack in order to achieve the operating voltage-current point of maximum efficiency for the FC system. A system block diagram is shown in Fig.1.1. In such a conventional arrangement, the battery is sized to deliver the difference between the energy required by the traction drive and the energy supplied by the FC system. Energy requirements can increase depending on the drive cycle over which the vehicle is expected to operate. Peak-power transients result in an increase of losses and elevated temperatures which result in a decrease in the lifetime of the battery. This research will propose a novel two-input direct current (dc) dc to dc converter to interface an additional energy-storage element, an ultracapacitor (UC), which is shown in Fig.1.2. It will assist the battery during transients to reduce the peak-power requirements of the battery.

  13. Read-out electronics for DC squid magnetic measurements

    DOEpatents

    Ganther, Jr., Kenneth R.; Snapp, Lowell D.

    2002-01-01

    Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

  14. National Small Business Federal Contracting Summit-DC Fall Conference

    Energy.gov [DOE]

    The 2014 National Small Business Federal Contracting Summit - DC Fall Conference is presented jointly by the National Association of Small Business Contractors (the Supplier Council of The American Small Business Chamber of Commerce) and the U.S. Women's Chamber of Commerce in Washington DC.

  15. Dynamic microscopic theory of fusion using DC-TDHF

    SciTech Connect

    Umar, A. S.; Oberacker, V. E.; Keser, R.; Maruhn, J. A.; Reinhard, P.-G.

    2012-10-20

    The density-constrained time-dependent Hartree-Fock (DC-TDHF) theory is a fully microscopic approach for calculating heavy-ion interaction potentials and fusion cross sections below and above the fusion barrier. We discuss recent applications of DC-TDHF method to fusion of light and heavy systems.

  16. Historical Material Analysis of DC745U Pressure Pads

    SciTech Connect

    Ortiz-Acosta, Denisse

    2012-07-30

    As part of the Enhance Surveillance mission, it is the goal to provide suitable lifetime assessment of stockpile materials. This report is an accumulation of historical publication on the DC745U material and their findings. It is the intention that the B61 LEP program uses this collection of data to further develop their understanding and potential areas of study. DC745U is a commercially available silicone elastomer consisting of dimethyl, methyl-phenyl, and methyl-vinyl siloxane repeat units. Originally, this material was manufactured by Dow Corning as Silastic{reg_sign} DC745U at their manufacturing facility in Kendallville, IN. Recently, Dow Corning shifted this material to the Xiameter{reg_sign} brand product line. Currently, DC745U is available through Xiameter{reg_sign} or Dow Corning's distributor R. D. Abbott Company. DC745U is cured using 0.5 wt% vinyl-specific peroxide curing agent known as Luperox 101 or Varox DBPH-50. This silicone elastomer is used in numerous parts, including two major components (outer pressure pads and aft cap support) in the W80 and as pressure pads on the B61. DC745U is a proprietary formulation, thus Dow Corning provides limited information on its composition and properties. Based on past experience with Dow Corning, DC745U is at risk of formulation changes without notification to the costumer. A formulation change for DC745U may have a significant impact because the network structure is a key variable in determining material properties. The purpose of this report is to provide an overview of historical DC745U studies and identify gaps that need to be addressed in future work. Some of the previous studies include the following: 1. Spectroscopic characterization of raw gum stock. 2. Spectroscopic, thermal, and mechanical studies on cured DC745U. 3. Nuclear Magnetic Resonance (NMR) and solvent swelling studies on DC745U with different crosslink densities. 4. NMR, solvent swelling, thermal, and mechanical studies on thermally aged

  17. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Linked Open Data Workshop in Washington, D.C. Home > Linked Open Data Workshop in Washington, D.C. > Posts by term > Linked Open Data Workshop in Washington, D.C. Content Group...

  18. Application to Export Electric Energy OE Docket No. EA-351 DC...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    1 DC Energy Dakota, LLC Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC Application from DC Energy Dakota, LLC to export electric energy to Canada...

  19. Implementing the DC Mode in Cosmological Simulations with Supercomoving Variables

    DOE PAGES [OSTI]

    Gnedin, Nickolay Y; Kravtsov, Andrey V; Rudd, Douglas H

    2011-06-02

    As emphasized by previous studies, proper treatment of the density fluctuation on the fundamental scale of a cosmological simulation volume - the 'DC mode' - is critical for accurate modeling of spatial correlations on scales ~> 10% of simulation box size. We provide further illustration of the effects of the DC mode on the abundance of halos in small boxes and show that it is straightforward to incorporate this mode in cosmological codes that use the 'supercomoving' variables. The equations governing evolution of dark matter and baryons recast with these variables are particularly simple and include the expansion factor, andmorehence the effect of the DC mode, explicitly only in the Poisson equation.less

  20. The Honorable Richard M

    Office of Legacy Management (LM)

    Al,exand,er W illiams (301-427-1719) of my staff. I' Sincerely, - '8 , James W . Wagoner II -Director " "'. '. . O ff-SiteSavannah River Program Division . O ffice of ...

  1. The Honorable Richard M

    Office of Legacy Management (LM)

    Alexander W illiams (301-427-1719) of my staff. Sincerely, Director Enclosures Off-SiteSavannah River Division Office of Eastern Area Programs Office of Environmental Restoration ...

  2. Richard Gerber's NERSC Blog

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    success Everyone who showed up at NERSC's Oakland Scientific Facility, had fun, learned some new things, and got some big performance improvements in their code. <...

  3. Richard Rookard ? TAT Instructor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    TAT School and provide instruction in courses such as algebra, mechanics and strength of materials. "Upon successful completion of the program, Roane State would grant 30 hours of...

  4. Richard Runnels- Biography

    Energy.gov [DOE]

    Rick Runnels is the Operations Support Manager with URS Professional Solutions. In this role he provides resource, expertise and personal oversight as a senior technical consultant for startup readiness and performance assurance activities within nuclear projects across the DOE complex and in the UK. Prior to joining URS,

  5. Richard Bolin | Bioenergy | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    He also develops winning proposals, manages projects, and markets NREL's bioenergy ... Renewable Energy Laboratory, National Bioenergy Center (NBC), 2013-present Senior ...

  6. The Automotive X Prize rolls into Washington, DC 09/16/10 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    The Automotive X Prize rolls into Washington, DC 091610 The Automotive X Prize rolls into Washington, DC 091610 Addthis ProgressiveXPrizeEventSeptember162010Peraves187mpg...

  7. Improved DC Gun and Insulator Assembly (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Improved DC Gun and Insulator Assembly Citation Details In-Document Search Title: Improved DC Gun and Insulator Assembly Many user facilities such as synchrotron radiation light ...

  8. We Have a Winner - DC High School Regional Science Bowl Competition...

    Energy Saver

    We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday ...

  9. Electrodeposited Nanolaminated CoNiFe Cores for Ultracompact DC-DC Power Conversion

    SciTech Connect

    Kim, J; Kim, M; Herrault, F; Park, JY; Allen, MG

    2015-09-01

    Laminated metallic alloy cores (i.e., alternating layers of thin film metallic alloy and insulating material) of appropriate lamination thickness enable suppression of eddy current losses at high frequencies. Magnetic cores comprised of many such laminations yield substantial overall magnetic volume, thereby enabling high-power operation. Previously, we reported nanolaminated permalloy (Ni-80 Fe-20) cores based on a sequential electrodeposition technique, demonstrating negligible eddy current losses at peak flux densities up to 0.5 T and operating at megahertz frequencies. This paper demonstrates improved performance of nanolaminated cores comprising tens to hundreds of layers of 300-500-nm-thick CoNiFe films that exhibit superior magnetic properties (e.g., higher saturation flux density and lower coercivity) than permalloy. Nanolaminated CoNiFe cores can be operated up to a peak flux density of 0.9 T, demonstrating improved power handling capacity and exhibiting 30% reduced volumetric core loss, attributed to lowered hysteresis losses compared to the nanolaminated permalloy core of the same geometry. Operating these cores in a buck dc-dc power converter at a switching frequency of 1 MHz, the nanolaminated CoNiFe cores achieved a conversion efficiency exceeding 90% at output power levels up to 7 W, compared to an achieved permalloy core conversion efficiency below 86% at 6 W.

  10. Analysis of a transformer-less, multi-level DC-DC converter for HVDC operation

    SciTech Connect

    Karady, G.G.; Devarajan, S.

    1998-12-31

    HVDC systems require DC step up and DC step down units. The traditional approach is the application of twelve-pulse thyristor bridges with transformers. The developments of fast switching IGBT devices permit the development of transformer-less, multi-level converters. A multi-level circuit was suggested by Limpaecher. This paper presents a detailed simulation of the proposed circuit together with the analysis of its performance. The converter consists of a set of capacitors, air core inductors and solid state switches arranged in a ladder network. In the step-up mode, the closing of solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches connect the capacitors in series and discharge them through an air-core inductor to the load. In the step-down mode the capacitors are charged in series and discharged in parallel. The circuit has three modes of operation in each cycle: charge, inversion, and discharge. The circuit operation is analyzed in each mode using SPICE simulations. The selection of the components is discussed and output voltage regulation is analyzed. The results show that the proposed circuit promises significant reduction of losses, because of the zero current switching. The investment cost is reduced because of the elimination of transformers.

  11. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOEpatents

    Hilbert, C.; Martinis, J.M.; Clarke, J.

    1984-04-27

    A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

  12. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOEpatents

    Hilbert, Claude; Martinis, John M.; Clarke, John

    1986-01-01

    A low noise radiofrequency amplifier (10), using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID (11) and an input coil (12) are maintained at superconductivity temperatures in a superconducting shield (13), with the input coil (12) inductively coupled to the superconducting ring (17) of the dc SQUID (11). A radiofrequency signal from outside the shield (13) is applied to the input coil (12), and an amplified radiofrequency signal is developed across the dc SQUID ring (17) and transmitted to exteriorly of the shield (13). A power gain of 19.5.+-.0.5 dB has been achieved with a noise temperature of 1.0.+-.0.4 K. at a frequency of 100 MHz.

  13. ARM - Field Campaign - DC-8 Cloud Radar Campaign

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Contact Lihua Li (lihua@mirsl.ecs.umass.edu) or Steve Sekelsky (sekelsky@mirsl.ecs.umass.edu). Summary The NASA DC-8 was based at Tinker Air Force Base near Oklahoma City between ...

  14. Simultaneous distribution of AC and DC power - Energy Innovation...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Outlook, solar energy is expected to grow globally by 12.7% per year until 2035; more than any other renewable energy source. The growth of on-site DC (Direct ...

  15. National Science Bowl Brings Best and Brightest to DC

    Energy.gov [DOE]

    The National Science Bowl Finals in Washington D.C. April 27 to 30 pit 113 high and middle school teams against one another answering questions Jeopardy-style about biology, chemistry, earth science, physics, astronomy, and math.

  16. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon apearravt028boan2010...

  17. The War of the Currents: AC vs. DC Power

    Energy.gov [DOE]

    Nikola Tesla and Thomas Edison played key roles in the War of the Currents. Learn more about AC and DC power -- and how they affect our electricity use today.

  18. Microsoft PowerPoint - conti_conf_nobonus.ppt

    Gasoline and Diesel Fuel Update

    Conti, USDOE, April 6th, 2010 Richard Newell, Paris, March 1, 2010 1 Richard Newell, SAIS, December 14, 2009 1 April 6 th , 2010 U.S. Department of Energy John Conti, Director Office of Integrated Analysis and Forecasting The U.S. Energy Outlook John Conti, USDOE, April 6th, 2010 2 * Generally assumes current laws and regulations - provisions sunset if specified (e.g., renewable tax credits expire) - excludes potential future laws and regulations (e.g., proposed greenhouse gas legislation is not

  19. Hurricane Earl - Where Is It Headed and What Does It Have to Do With

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy? | Department of Energy Earl - Where Is It Headed and What Does It Have to Do With Energy? Hurricane Earl - Where Is It Headed and What Does It Have to Do With Energy? September 1, 2010 - 5:50pm Addthis Dr. Richard Newell Dr. Richard Newell Hurricane Earl has the East Coast of the United States in his sights. Earl is moving northward from the Bahamas, and is expected to skirt the U.S. Atlantic coast from Cape Hatteras to New England, before making landfall in Nova Scotia over the

  20. NREL: Energy Analysis - Washington D.C. Office Staff

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Washington D.C. Office The following SEAC staff are based in our Washington D.C. Office. They support a variety of programs and activities, and often are the liaison between the U.S. Department of Energy and staff based in Golden, Colorado. Team Lead: Robert Margolis Administrative Support: Kaitlyn Wingfield Austin Brown David J. Feldman Thomas Jenkin John (Jack) Mayernik Colin McMillan Kathleen Nawaz Monisha Shah Photo of Austin Brown. Austin Brown Senior Analyst (Strategic Planning) Areas of

  1. Energy Department Completes Cool Roof Installation on DC Headquarters

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building to Save Money by Saving Energy | Department of Energy Completes Cool Roof Installation on DC Headquarters Building to Save Money by Saving Energy Energy Department Completes Cool Roof Installation on DC Headquarters Building to Save Money by Saving Energy December 14, 2010 - 12:00am Addthis Washington - Secretary Steven Chu today announced the completion of a new cool roof installation on the Department of Energy's Headquarters West Building. There was no incremental cost to adding

  2. Memorandum From: Leo Breton, Founder Energy Innovations Washington, DC

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    From: Leo Breton, Founder Energy Innovations Washington, DC 202-329-6813 Lbreton2000@yahoo.com To: expartecommunications@hq.doe.gov Subj: Complying with DOE's "ex parte communications" requirements Leo Breton, representing Energy Innovations of Washington, DC, a small company engaged in improving the energy efficiency of appliances, automobiles, and HVAC systems, requested a meeting with DOE regarding residential cooktop and range efficiency standards and related test procedures. A

  3. User Science Exhibition March 28-29 in Washington DC

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Science Exhibition March 28-29 in Washington DC User Science Exhibition March 28-29 in Washington DC February 17, 2012 by Francesca Verdier This March 28 and 29 the National User Facilities Organization is holding a User Science Exhibition on Capitol Hill. All major DOE facilities will have posters and representatives there. NERSC users are welcome to attend. This event will highlight the significant and important role that scientific user facilities play in science education, economic

  4. A High Efficiency DC-DC Converter Topology Suitable for Distributed Large Commercial and Utility Scale PV Systems

    SciTech Connect

    Agamy, Mohammed S; Harfman-Todorovic, Maja; Elasser, Ahmed; Steigerwald, Robert L; Sabate, Juan A; Chi, Song; McCann, Adam J; Zhang, Li; Mueller, Frank

    2012-09-01

    In this paper a DC-DC power converter for distributed photovoltaic plant architectures is presented. The proposed converter has the advantages of simplicity, high efficiency, and low cost. High efficiency is achieved by having a portion of the input PV power directly fed forward to the output without being processed by the converter. The operation of this converter also allows for a simplified maximum power point tracker design using fewer measurements

  5. DC Microgrids Scoping Study. Estimate of Technical and Economic Benefits

    SciTech Connect

    Backhaus, Scott N.; Swift, Gregory William; Chatzivasileiadis, Spyridon; Tschudi, William; Glover, Steven; Starke, Michael; Wang, Jianhui; Yue, Meng; Hammerstrom, Donald

    2015-03-23

    Microgrid demonstrations and deployments are expanding in US power systems and around the world. Although goals are specific to each site, these microgrids have demonstrated the ability to provide higher reliability and higher power quality than utility power systems and improved energy utilization. The vast majority of these microgrids are based on AC power transfer because this has been the traditionally dominant power delivery scheme. Independently, manufacturers, power system designers and researchers are demonstrating and deploying DC power distribution systems for applications where the end-use loads are natively DC, e.g., computers, solid-state lighting, and building networks. These early DC applications may provide higher efficiency, added flexibility, reduced capital costs over their AC counterparts. Further, when onsite renewable generation, electric vehicles and storage systems are present, DC-based microgrids may offer additional benefits. Early successes from these efforts raises a question - can a combination of microgrid concepts and DC distribution systems provide added benefits beyond what has been achieved individually?

  6. An integrated flyback converter for DC uninterruptible power supply

    SciTech Connect

    Ma, K.W.; Lee, Y.S.

    1996-03-01

    An integrated flyback converter performing the combined functions of uninterruptible power supply (UPS) and switch-mode power supply (SMPS) is presented. This converter has a high voltage main power input and a low voltage backup battery input. DC output is obtained form the main input via a flyback converter during normal operation and from the backup battery via another flyback converter when input power fails. High conversion efficiency is achieved in normal, backup, and charging modes as there is only a single dc-dc conversion in each mode. The converter circuit is very simple, with two switching transistors, a relay for mode switching, and a single magnetic structure only. This new design offers substantial improvement in efficiency, size, and cost over the conventional cascade of UPS and SMPS due to single voltage conversion, high frequency switching, and removal of design redundancy. The operation, design, analysis, and experimental results of the converter are presented.

  7. Nuclear magnetic resonance experiments with dc SQUID amplifiers

    SciTech Connect

    Heaney, M.B. . Dept. of Physics Lawrence Berkeley Lab., CA )

    1990-11-01

    The development and fabrication of dc SQUIDs (Superconducting QUantum Interference Devices) with Nb/Al{sub 2}O{sub 3}/Nb Josephson junctions is described. A theory of the dc SQUID as a radio-frequency amplifier is presented, with an optimization strategy that accounts for the loading and noise contributions of the postamplifier and maximizes the signal-to-noise ratio of the total system. The high sensitivity of the dc SQUID is extended to high field NMR. A dc SQUID is used as a tuned radio-frequency amplifier to detect pulsed nuclear magnetic resonance at 32 MHz from a metal film in a 3.5 Tesla static field. A total system noise temperature of 11 K has been achieved, at a bath temperature of 4.2 K. The minimum number of nuclear Bohr magnetons observable from a free precession signal after a single pulse is about 2 {times} 10{sup 17} in a bandwidth of 25 kHz. In a separate experiment, a dc SQUID is used as a rf amplifier in a NQR experiment to observe a new resonance response mechanism. The net electric polarization of a NaClO{sub 3} crystal due to the precessing electric quadrupole moments of the Cl nuclei is detected at 30 MHz. The sensitivity of NMR and NQR spectrometers using dc SQUID amplifiers is compared to the sensitivity of spectrometers using conventional rf amplifiers. A SQUID-based spectrometer has a voltage sensitivity which is comparable to the best achieved by a FET-based spectrometer, at these temperatures and operating frequencies.

  8. Graphite electrode DC arc furnace. Innovative technology summary report

    SciTech Connect

    1999-05-01

    The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of

  9. DC Students Take On Regional Science Bowl Competition | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy DC Students Take On Regional Science Bowl Competition DC Students Take On Regional Science Bowl Competition March 10, 2014 - 4:47pm Addthis The high school regional science bowl competition was held on Saturday, February 22, 2014 at the U.S. Department of Energy. The winning team was Woodrow Wilson High School. The high school regional science bowl competition was held on Saturday, February 22, 2014 at the U.S. Department of Energy. The winning team was Woodrow Wilson High School.

  10. High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOEpatents

    Shimer, Daniel W.; Lange, Arnold C.

    1995-01-01

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

  11. High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOEpatents

    Shimer, D.W.; Lange, A.C.

    1995-05-23

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

  12. Active dc filter for HVDC system--A test installation in the Konti-Skan DC link at Lindome converter station

    SciTech Connect

    Zhang, Wenyan; Asplund, G. . HVDC Division); Aberg, A. . Dept. of Man-Machine Communication); Jonsson, U. ); Loeoef, O. . Region Vaestsverige)

    1993-07-01

    The purpose of introducing active dc filters is to meet the more and more stringent requirement from power utilities on limiting telephone interference caused by harmonic currents from HVdc transmission lines, without unnecessarily increasing the cost of HVdc stations. An active dc filter installed in the Konti-Skan HVdc link is described. The active dc filter is connected at the bottom of an existing passive dc filter at the Lindome station. The active dc filter includes optic harmonic current measuring unit, control system, protection and supervision system, PWM power amplifier, high-frequency transformer, surge arrester, and coupling apparatuses. The active dc filter has small physical size and occupies small ground area. The performance of the active dc filter for eliminating the disturbing harmonics is excellent. To achieve comparable results by passive filters would require something like ten times more high voltage equipment.

  13. Electrostatic coalescence system with independent AC and DC hydrophilic electrodes

    DOEpatents

    Hovarongkura, A. David; Henry, Jr., Joseph D.

    1981-01-01

    An improved electrostatic coalescence system is provided in which independent AC and DC hydrophilic electrodes are employed to provide more complete dehydration of an oil emulsion. The AC field is produced between an AC electrode array and the water-oil interface wherein the AC electrode array is positioned parallel to the interface which acts as a grounded electrode. The emulsion is introduced into the AC field in an evenly distributed manner at the interface. The AC field promotes drop-drop and drop-interface coalescence of the water phase in the entering emulsion. The continuous oil phase passes upward through the perforated AC electrode array and enters a strong DC field produced between closely spaced DC electrodes in which small dispersed droplets of water entrained in the continuous phase are removed primarily by collection at hydrophilic DC electrodes. Large droplets of water collected by the electrodes migrate downward through the AC electrode array to the interface. All phase separation mechanisms are utilized to accomplish more complete phase separation.

  14. Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors

    SciTech Connect

    Shepard, Kenneth L

    2013-03-31

    In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile

  15. D.C. Middle and High School Students Get a Chance to Experience...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D.C. Middle and High School Students Get a Chance to Experience the Regional Science Bowl Competition Setting D.C. Middle and High School Students Get a Chance to Experience the ...

  16. GRR Update Meeting scheduled for 9/13 in D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    GRR Update Meeting scheduled for 913 in D.C. Home > Blogs > Kyoung's blog Kyoung's picture Submitted by Kyoung(150) Contributor 6 September, 2012 - 08:51 D.C. GRR meeting update...

  17. Global DC Power System Market Trends, Analysis 2015-2019 | OpenEI...

    OpenEI (Open Energy Information) [EERE & EIA]

    either positive or negative. It can be powered from an AC or DC source. A basic DC power system consists of a transformer, a rectifier, a filter, and a regulator. All these...

  18. Global DC Power System Market Key Vendors | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    either positive or negative. It can be powered from an AC or DC source. A basic DC power system consists of a transformer, a rectifier, a filter, and a regulator. All these...

  19. Interviews in Washington, DC for Albert Einstein Fellowship Semi-Finalists

    Office of Energy Efficiency and Renewable Energy (EERE)

    Selected semi-finalists in the Albert Einstein Distinguished Educator Fellowship are invited to DC for interviews.

  20. Demonstration of LED Retrofit Lamps at the Smithsonian Art Museum, Washington, DC

    SciTech Connect

    Miller, N. J.; Rosenfeld, S. M.

    2012-06-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Smithsonian American Art Museum in Washington, DC.

  1. DC photogun vacuum characterization through photocathode lifetime studies

    SciTech Connect

    Marcy Stutzman; Joseph Grames; Matt Poelker; Kenneth Surles-Law; Philip Adderley

    2007-07-02

    Excellent vacuum is essential for long photocathode lifetimes in DC high voltage photoelectron guns. Vacuum Research at Thomas Jefferson National Accelerator Facility has focused on characterizing the existing vacuum systems at the CEBAF polarized photoinjector and on quantifying improvements for new systems. Vacuum chamber preprocessing, full activation of NEG pumps and NEG coating the chamber walls should improve the vacuum within the electron gun, however, pressure measurement is difficult at pressures approaching the extreme-high-vacuum (XHV) region and extractor gauge readings are not significantly different between the improved and original systems. The ultimate test of vacuum in a DC high voltage photogun is the photocathode lifetime, which is limited by the ionization and back-bombardment of residual gasses. Discussion will include our new load-locked gun design as well as lifetime measurements in both our operational and new photo-guns, and the correlations between measured vacuum and lifetimes will be investigated.

  2. Multilevel cascade voltage source inverter with seperate DC sources

    DOEpatents

    Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

    2002-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  3. Multilevel cascade voltage source inverter with separate DC sources

    DOEpatents

    Peng, F.Z.; Lai, J.S.

    1997-06-24

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

  4. Multilevel cascade voltage source inverter with seperate DC sources

    DOEpatents

    Peng, Fang Zheng; Lai, Jih-Sheng

    2001-04-03

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  5. Multilevel cascade voltage source inverter with seperate DC sources

    DOEpatents

    Peng, Fang Zheng; Lai, Jih-Sheng

    1997-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  6. Labor-Management Roundtable Forrestal Building, Washington, DC

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Labor-Management Roundtable Forrestal Building, Washington, DC June 27, 2014 10:00 - 11:30 AM (EST) 7E-069 AGENDA Reciprocity Certification Presentation Plaque Presentation by Secretary of Energy Introductory Remarks Ernest J. Moniz, Secretary of Energy Roundtable Remarks/Discussion Union Leadership Closing Remarks Ernest J. Moniz, Secretary of Energy This meeting is about hearing the concerns of the Unions on Safety, Operations, and Communications. Representatives of DOE contractor employees

  7. Modeling Microinverters and DC Power Optimizers in PVWatts

    SciTech Connect

    MacAlpine, S.; Deline, C.

    2015-02-01

    Module-level distributed power electronics including microinverters and DC power optimizers are increasingly popular in residential and commercial PV systems. Consumers are realizing their potential to increase design flexibility, monitor system performance, and improve energy capture. It is becoming increasingly important to accurately model PV systems employing these devices. This document summarizes existing published documents to provide uniform, impartial recommendations for how the performance of distributed power electronics can be reflected in NREL's PVWatts calculator (http://pvwatts.nrel.gov/).

  8. UNITED STATES DEPARTMENT OF ENERGY Washington, D.C.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Before the UNITED STATES DEPARTMENT OF ENERGY Washington, D.C. In the Matter of Request for Information ) Regarding Reducing Regulatory Burden ) ''Regulatory Burden RFI" 5 CFR Chapter XXII ) 10 CFR Chapters II, III, and X ) COMMENTS OF THE CONSUMER ELECTRONICS ASSOCIATION Introduction The Consumer Electronics Association (CEA) is the preeminent trade association promoting growth in the $285 billion U.S. consumer electronics industry. CEA represents more than 2,000 corporate members involved

  9. dc-plasma-sprayed electronic-tube device

    DOEpatents

    Meek, T.T.

    1982-01-29

    An electronic tube and associated circuitry which is produced by dc plasma arc spraying techniques is described. The process is carried out in a single step automated process whereby both active and passive devices are produced at very low cost. The circuitry is extremely reliable and is capable of functioning in both high radiation and high temperature environments. The size of the electronic tubes produced are more than an order of magnitude smaller than conventional electronic tubes.

  10. Synthesis of silicon nanotubes by DC arc plasma method

    SciTech Connect

    Tank, C. M.; Bhoraskar, S. V.; Mathe, V. L.

    2012-06-05

    Plasma synthesis is a novel technique of synthesis of nanomaterials as they provide high rate of production and promote metastable reactions. Very thin walled silicon nanotubes were synthesized in a DC direct arc thermal plasma reactor. The effect of parameters of synthesis i.e. arc current and presence of hydrogen on the morphology of Si nanoparticles is reported. Silicon nanotubes were characterized by Transmission Electron Microscopy (TEM), Local Energy Dispersive X-ray analysis (EDAX), and Scanning Tunneling Microscopy (STM).

  11. AVTA: Battery Testing- DC Fast Charging's Effects on PEV Batteries

    Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following report describes DC fast charging's effects on plug-in electric vehicle batteries. This research was conducted by Idaho National Laboratory.

  12. DC Microgrids Scoping Study: Estimate of Technical and Economic Benefits

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (March 2015) | Department of Energy Microgrids Scoping Study: Estimate of Technical and Economic Benefits (March 2015) DC Microgrids Scoping Study: Estimate of Technical and Economic Benefits (March 2015) Microgrid demonstrations and deployments have shown the ability of microgrids to provide higher reliability and higher power quality than utility power systems and improved energy utilization. The vast majority of these microgrids are based on AC power, but some manufacturers, power system

  13. The Use of DC Glow Discharges as Undergraduate Educational Tools

    SciTech Connect

    Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

    2012-10-09

    Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

  14. Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination

    DOEpatents

    Lai, Jih-Sheng; Liu, Changrong; Ridenour, Amy

    2009-04-14

    DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

  15. Application to Export Electric Energy OE Docket No. EA-351 DC Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Dakota, LLC | Department of Energy 1 DC Energy Dakota, LLC Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC Application from DC Energy Dakota, LLC to export electric energy to Canada Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC (185.5 KB) More Documents & Publications EA-351 DC Energy Dakota, LLC Application to export electric energy OE Docket No. EA-210-B PPL EnergyPlus, LLC Application to Export Electric Energy OE

  16. Hardwired Control Changes For NSTX DC Power Feeds

    SciTech Connect

    Ramakrishnan, S.

    2013-06-28

    The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The original TFTR Hardwired Control System (HCS) with electromechanical relays was used for NSTX DC Power loop control and protection during NSTX operations. As part of the NSTX Upgrade, the HCS is being changed to a PLC-based system with the same control logic. This paper gives a description of the changeover to the new PLC-based system __________________________________________________

  17. Heteroepitaxial Ge-on-Si by DC magnetron sputtering

    SciTech Connect

    Steglich, Martin; Schrempel, Frank; Füchsel, Kevin; Kley, Ernst-Bernhard; Patzig, Christian; Berthold, Lutz; Höche, Thomas; Tünnermann, Andreas

    2013-07-15

    The growth of Ge on Si(100) by DC Magnetron Sputtering at various temperatures is studied by Spectroscopic Ellipsometry and Transmission Electron Microscopy. Smooth heteroepitaxial Ge films are prepared at relatively low temperatures of 380°C. Typical Stransky-Krastanov growth is observed at 410°C. At lower temperatures (320°C), films are essentially amorphous with isolated nanocrystallites at the Si-Ge interface. A minor oxygen contamination at the interface, developing after ex-situ oxide removal, is not seen to hinder epitaxy. Compensation of dislocation-induced acceptors in Ge by sputtering from n-doped targets is proposed.

  18. The dc modeling program (DCMP): Version 2. 0

    SciTech Connect

    Chapman, D.G. )

    1990-08-01

    In this project one of the main objectives was the refinement of tools for the study of HVDC systems. The original software was prepared in project RP1964-2 (EL-4365) as power flow and stability program models for HVDC systems. In this project new modeling capabilities were added to both the power flow and stability models. Additionally, the HVDC specific model capabilities were integrated into a new program, termed the Standalone program, for use in the development and testing of HVDC models. This manual provides technical background for programmers and those interested in understanding, augmenting or transporting the dc models.

  19. Positron lifetime spectrometer using a DC positron beam

    DOEpatents

    Xu, Jun; Moxom, Jeremy

    2003-10-21

    An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

  20. Design and Performance of the Cornell ERL DC Photoemission Gun

    SciTech Connect

    Smolenski, K.; Bazarov, I.; Dunham, B.; Li, H.; Li, Y.; Liu, X.; Ouzounov, D.; Sinclair, C.

    2009-08-04

    Cornell University is planning to build an Energy Recovery Linac (ERL) X-ray facility. For an ERL, it is well known that the x-ray beam brightness for the users is mainly determined by the initial electron beam emittance provided by the injector. To address technical challenges of producing very low emittance beams at high average current as required for an ERL, Cornell University has proposed a prototype injector with 5-15 MeV beam energy, 100 mA maximum average current and 77 pC/bunch. In this article, we describe the design, construction and initial results for a DC photoemission gun now under operation.

  1. Notices Ave. SW., Room 3E207, Washington, DC

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5295 Federal Register / Vol. 81, No. 55 / Tuesday, March 22, 2016 / Notices Ave. SW., Room 3E207, Washington, DC 20202. Telephone: (202) 453-6891 or by email: ddra@ed.gov. If you use a TDD or a TTY, call the FRS, toll free, at 1-800-877-8339. If you request an application from ED Pubs, be sure to identify this program as follows: CFDA number 84.022A. VIII. Other Information Accessible Format: Individuals with disabilities can obtain this document and a copy of the application package in an

  2. DC switching regulated power supply for driving an inductive load

    DOEpatents

    Dyer, G.R.

    1983-11-29

    A dc switching regulated power supply for driving an inductive load is provided. The regulator basic circuit is a bridge arrangement of diodes and transistors. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. A dc power supply is connected to the input of the bridge and the output is connected to the load. A servo controller is provided to control the switching rate of the transistors to maintain a desired current to the load. The regulator may be operated in three stages or modes: (1) for current runup in the load, both first and second transistor switch arrays are turned on and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned off, and load current flywheels through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays off, allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load.

  3. Single-mode deformation via nanoindentation in dc-Si

    SciTech Connect

    Wong, Sherman; Haberl, Bianca; Williams, James S.; Bradby, Jodie E.

    2015-01-01

    The mixture of the metastable body-centered cubic (bc8) and rhombohedral (r8) phases of silicon that is formed via nanoindentation of diamond cubic (dc) silicon exhibits properties that are of scientifc and technological interest. This letter demonstrates that large regions of this mixed phase can be formed in crystalline Si via nanoindentation without signifcant damage to the surrounding crystal. Cross-sectional transmission electron microscopy is used to show that volumes 6 um wide and up to 650 nm deep can be generated in this way using a spherical tip of 21.5 um diameter. The phase transformed region is characterised using both Raman microspectroscopy and transmission electron microscopy. It is found that uniform loading using large spherical indenters can favor phase transformation as the sole deformation mechanism as long as the maximum load is below a critical level. We suggest that the sluggish nature of the transformation from the dc-Si phase to the metallic (b-Sn) phase normally results in competing deformation mechanisms such as slip and cracking but these can be suppressed by controlled loading conditions.

  4. Washington, DC Regional High School Science Bowl | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) Washington, DC Regional High School Science Bowl National Science Bowl® (NSB) NSB Home About Regional Competitions Rules, Forms, and Resources High School Regionals Middle School Regionals National Finals Volunteers Key Dates Frequently Asked Questions News Media Contact Us WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us High School Regionals Washington, DC

  5. Washington, DC Regional Middle School Science Bowl | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) Washington, DC Regional Middle School Science Bowl National Science Bowl® (NSB) NSB Home About Regional Competitions Rules, Forms, and Resources High School Regionals Middle School Regionals National Finals Volunteers Key Dates Frequently Asked Questions News Media Contact Us WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us Middle School Regionals Washington, DC

  6. BERAC Meeting April 30 - May 1, 2003 Washington DC | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) 30 - May 1, 2003 Washington DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting April 30 - May 1, 2003 Washington DC Print Text Size: A A A FeedbackShare Page BERAC Meeting April 30 - May 1, 2003 Washington, DC Agenda .pdf file (8KB) Presentations Teresa Fryberger .ppt file

  7. DC Students Flex Their Mental Muscles in Regional Science Bowl Competition

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy DC Students Flex Their Mental Muscles in Regional Science Bowl Competition DC Students Flex Their Mental Muscles in Regional Science Bowl Competition February 23, 2015 - 3:12pm Addthis DC Students Flex Their Mental Muscles in Regional Science Bowl Competition Students across the country are flexing their mental muscles to earn a top spot in the Department of Energy's National Science Bowl® competition. High school students in the nation's capital were able to showcase

  8. D.C. Middle and High School Students Get a Chance to Experience the

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Regional Science Bowl Competition Setting | Department of Energy D.C. Middle and High School Students Get a Chance to Experience the Regional Science Bowl Competition Setting D.C. Middle and High School Students Get a Chance to Experience the Regional Science Bowl Competition Setting March 26, 2014 - 1:07pm Addthis Annie Whatley Annie Whatley Deputy Director, Office of Minority Education and Community Development Have you ever heard of the Washington, D.C. regional science bowl competition?

  9. BERAC Meeting, February 16-17, 2012, Washington, DC| U.S. DOE Office of

    Office of Science (SC)

    Science (SC) BERAC Meeting, February 16-17, 2012, Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting, February 16-17, 2012, Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting February 16-17, 2012 Washington, DC Agenda .pdf file (25KB) Presentations

  10. Better Buildings Summit Kicks off in Washington, DC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Better Buildings Summit Kicks off in Washington, DC Better Buildings Summit Kicks off in Washington, DC May 9, 2016 - 11:11am Addthis The 2016 Better Buildings Summit kicked off today in Washington, DC, bringing together leading organizations across key sectors to showcase solutions to cut energy intensity in their buildings portfolio-wide by 20% over the next ten years. During this three day event, partners and stakeholders will exchange best practices, highlight demonstrated market solutions

  11. 10 CFR 850 Notice of Proposed Rulemaking Public Hearing Transcript, Washington, DC – August 11, 2016

    Office of Energy Efficiency and Renewable Energy (EERE)

    Transcript of the Washington, DC public hearing to received comments on the proposed amendments to 10 CFR 850, Chronic Beryllium Disease Prevention Program.

  12. A Segmented Drive Inverter Topology with a Small DC Bus Capacitor |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy A Segmented Drive Inverter Topology with a Small DC Bus Capacitor A Segmented Drive Inverter Topology with a Small DC Bus Capacitor 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ape004_su_2012_o.pdf (1.76 MB) More Documents & Publications A Segmented Drive Inverter Topology with a Small DC Bus Capacitor A Segmented Drive Inverter Topology with a Small DC Bus Capacitor A Segmented Drive System

  13. Harnessing the Power of the Sun, Solar Impulse Plane Lands in DC Area

    Office of Energy Efficiency and Renewable Energy (EERE)

    Today, Secretary Moniz spoke at an event welcoming the arrival of the solar-powered Solar Impulse plane at Dulles International Airport near Washington, D.C.

  14. A Segmented Drive Inverter Topology with a Small DC Bus Capacitor

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  15. Washington, D.C. and Indiana: Allison Hybrid Technology Achieves Commercial Success

    Energy.gov [DOE]

    EERE partner, Allison Transmission, Inc., has achieved commercial success in the greater Washington, D.C. area, with 1,480 hybrid buses on the road.

  16. EERE Success Story—Washington, D.C. and Indiana: Allison Hybrid Technology Achieves Commercial Success

    Energy.gov [DOE]

    EERE partner, Allison Transmission, Inc., has achieved commercial success in the greater Washington, D.C. area, with 1,480 hybrid buses on the road.

  17. U.S. Department of Energy Forrestal Building, Washington, D.C. | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Forrestal Building, Washington, D.C. U.S. Department of Energy Forrestal Building, Washington, D.C. Photo of Photovoltaic System at the Forrestal Building in Washington, DC The U.S. Department of Energy (DOE) is housed in the Forrestal Building in Washington, DC. A photovoltaic (PV) system was installed as part of the DOE's support of alternative energy and the Federal initiatives to lower energy usage. The 3 kW AC PV system is mounted on a balcony on the south side of the

  18. An Active Filter Approach to the Reduction of the DC Link Capacitor

    Energy.gov [DOE]

    2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

  19. Optimization of spin-torque switching using AC and DC pulses

    SciTech Connect

    Dunn, Tom; Kamenev, Alex

    2014-06-21

    We explore spin-torque induced magnetic reversal in magnetic tunnel junctions using combined AC and DC spin-current pulses. We calculate the optimal pulse times and current strengths for both AC and DC pulses as well as the optimal AC signal frequency, needed to minimize the Joule heat lost during the switching process. The results of this optimization are compared against numeric simulations. Finally, we show how this optimization leads to different dynamic regimes, where switching is optimized by either a purely AC or DC spin-current, or a combination AC/DC spin-current, depending on the anisotropy energies and the spin-current polarization.

  20. Disc rotors with permanent magnets for brushless DC motor

    DOEpatents

    Hawsey, Robert A.; Bailey, J. Milton

    1992-01-01

    A brushless dc permanent magnet motor drives an autonomous underwater vehe. In one embodiment, the motor comprises four substantially flat stators in stacked relationship, with pairs of the stators axially spaced, each of the stators comprising a tape-wound stator coil, and first and second substantially flat rotors disposed between the spaced pairs of stators. Each of the rotors includes an annular array of permanent magnets embedded therein. A first shaft is connected to the first rotor and a second, concentric shaft is connected to the second rotor, and a drive unit causes rotation of the two shafts in opposite directions. The second shaft comprises a hollow tube having a central bore in which the first shaft is disposed. Two different sets of bearings support the first and second shafts. In another embodiment, the motor comprises two ironless stators and pairs of rotors mounted on opposite sides of the stators and driven by counterrotating shafts.

  1. Superconducting DC and RF Properties of Ingot Niobium

    SciTech Connect

    Pashupati Dhakal, Gianluigi Ciovati, Peter Kneisel, Ganapati Rao Myneni

    2011-07-01

    The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE{sub 011} cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.

  2. Effect of DC voltage pulses on memristor behavior.

    SciTech Connect

    Evans, Brian R.

    2013-10-01

    Current knowledge of memristor behavior is limited to a few physical models of which little comprehensive data collection has taken place. The purpose of this research is to collect data in search of exploitable memristor behavior by designing and implementing tests on a HP Labs Rev2 Memristor Test Board. The results are then graphed in their optimal format for conceptualizing behavioral patterns. This series of experiments has concluded the existence of an additional memristor state affecting the behavior of memristors when pulsed with positively polarized DC voltages. This effect has been observed across multiple memristors and data sets. The following pages outline the process that led to the hypothetical existence and eventual proof of this additional state of memristor behavior.

  3. Auxiliary quasi-resonant dc tank electrical power converter

    DOEpatents

    Peng, Fang Z.

    2006-10-24

    An auxiliary quasi-resonant dc tank (AQRDCT) power converter with fast current charging, voltage balancing (or charging), and voltage clamping circuits is provided for achieving soft-switched power conversion. The present invention is an improvement of the invention taught in U.S. Pat. No. 6,111,770, herein incorporated by reference. The present invention provides faster current charging to the resonant inductor, thus minimizing delay time of the pulse width modulation (PWM) due to the soft-switching process. The new AQRDCT converter includes three tank capacitors or power supplies to achieve the faster current charging and minimize the soft-switching time delay. The new AQRDCT converter further includes a voltage balancing circuit to charge and discharge the three tank capacitors so that additional isolated power supplies from the utility line are not needed. A voltage clamping circuit is also included for clamping voltage surge due to the reverse recovery of diodes.

  4. Discharging a DC bus capacitor of an electrical converter system

    DOEpatents

    Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

    2014-10-14

    A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

  5. Richard Schaller | Argonne National Laboratory

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    News Ratiometric Sensing of Toxins using Quantum Dots New Solar Cell Technology Efficiently Captures High-Energy Photons Telephone 630.252.1423 Fax 630.252.4646 E-mail ...

  6. Richard King | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Starting with the Solar Decathlon 2007 the competition began including international teams, and in 2010 the first Solar Decathlon Europe was held in Madrid, Spain. The success of ...

  7. The Honorable Richard Arrington, Jr.

    Office of Legacy Management (LM)

    W. Alexander Williams (301-427-1719) of my staff. . zJc,T, C?ames W. Wagoner IIv Director Off-SiteSavannah River Program Division Office of Eastern Area Programs Office of ...

  8. Dr. Richard A. Swalin, Dean

    Office of Legacy Management (LM)

    Commission (AEC) during the early years of nuclear development to determine whether they need remedial action and whether the Department has authority to perform such action. ...

  9. Richard Gerber! NERSC User Services

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    March 1 9, 2 013 Overview * We're h olding t his r eview t o e nsure t hat - you h ave t he H PC r esources y ou n eed t o b e s uccessful i n y our research - NERSC c an f ulfill i ts m ission t o a ccelerate s cien>fic d iscovery w ithin the O ffice o f S cience * Your i nput h elps N ERSC - create s cience---based j us>fica>on f or a cquiring n eeded r esources - focus o n d elivering t he s ervices t hat a re i mportant t o y ou - make t echnology d ecisions * Result: N ERSC c an b

  10. Richard Provencher | Department of Energy

    Office of Environmental Management (EM)

    level radioactive waste. Mr. Provencher earned a Master of Science degree in health physics and a Bachelor of Arts degree in biology. He and his wife, Joanne, have three children

  11. Richard Hennig > Associate Professor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Materials Science and Engineering > Center Alumni > The Energy Materials Center at Cornell Hennig Associate Professor Materials Science and Engineering Research Group Webpage rhennig@mse.ufl.edu Professor Hennig received his Diploma in Physics at the University of Göttingen in 1997 and his Ph.D. in Physics from Washington University in St. Louis in 2000. After working as a postdoctoral researcher and research scientist at Ohio State University, he joined the faculty of the Department

  12. Richard Robinson > Assistant Professor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Materials Science and Engineering > Faculty Directory > The Energy Materials Center at Cornell Robinson Assistant Professor Materials Science and Engineering Research Group Webpage rdr82@cornell.edu Research Professor Robinson's research focuses on nanostructured materials for alternative energy applications. Our goal is to utilize the advanced properties of nanomaterials to build efficient thermoelectrics and fuel cells. By altering the size, shape, and composition of our particles we

  13. If you reside in WASHINGTON, DC - MD -VA- WV your salary will...

    National Nuclear Security Administration (NNSA)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, ... EN 49,246 74,872 01 EKEJ 34,075 58,511 02 EKEJ 51,630 84,855 03 EKEJEN ...

  14. An exposure chamber for studies on human perception of DC electric fields and ions

    SciTech Connect

    Nguyen, D.H.; Maruvada, P.S. )

    1994-10-01

    Direct current (DC) transmission lines are often used, for technical and economic reasons, as interconnections in modern high voltage power systems, which are essentially of the alternating current (AC) type. Significant differences exist, however, between the field effects produced in the vicinity of AC and DC transmission lines. DC electric fields induce charges, on the surface of a conducting body such as a human being and may therefore be ''perceived'' by humans due to hair stimulation and other sensations experienced by the skin. A human being exposed to the ionized field of a DC transmission line experiences not only surface charges but also the conducted ion currents. A systematic laboratory study has been undertaken by Hydro Quebec to investigate human perception, using well established psycho physical techniques, of DC electric fields and ions. The design, construction and operation of an exposure chamber for this purpose, in the high voltage laboratory of IREQ, are described in this paper.

  15. Thermoelectric properties of DC-sputtered filled skutterudite thin film

    SciTech Connect

    Fu, Gaosheng; Zuo, Lei; Chen, Jie; Lu, Ming; Yu, Liangyao

    2015-03-28

    The Yb filled CoSb{sub 3} skutterudite thermoelectric thin films were prepared by DC magnetron sputtering. The electrical conductivity, Seebeck coefficient, thermal conductivity, and figure of merit ZT of the samples are characterized in a temperature range of 300 K to 700 K. X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy are obtained to assess the phase composition and crystallinity of thin film samples at different heat treatment temperatures. Carrier concentrations and Hall mobilities are obtained from Hall Effect measurements, which provide further insight into the electrical conductivity and Seebeck coefficient mechanisms. The thermal conductivity of thin film filled skutterudite was found to be much less compared with bulk Yb filled CoSb{sub 3} skutterudite. In this work, the 1020 K heat treatment was adopted for thin film post process due to the high degree of crystallinity as well as avoiding reverse heating effect. Thin film samples of different thicknesses were prepared with the same sputtering deposition rate and maximum ZT of 0.48 was achieved at 700 K for the 130 nm thick sample. This value was between half and one third of the bulk figure of merit which was due to the lower Hall mobility.

  16. DC switching regulated power supply for driving an inductive load

    DOEpatents

    Dyer, George R.

    1986-01-01

    A power supply for driving an inductive load current from a dc power supply hrough a regulator circuit including a bridge arrangement of diodes and switching transistors controlled by a servo controller which regulates switching in response to the load current to maintain a selected load current. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. The regulator may be operated in three "stages" or modes: (1) For current runup in the load, both first and second transistor switch arrays are turned "on" and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned "off", and load current "flywheels" through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays "off", allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load. The three operating states are controlled automatically by the controller.

  17. Owning and Driving a Car You Plug In Scott Wilson, Electric Vehicle Association of Greater Washington DC

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Owning and Driving a Car You Plug In Scott Wilson, Electric Vehicle Association of Greater Washington DC US Patent and Trademark Office Electric Vehicle Association of Greater Washington DC www.evadc.org Electric Vehicle Association of Greater Washington DC www.evadc.org EVADC - Owners, Drivers, Builders of Electric Vehicles * Education of the public, promotion of EV's Electric Vehicle Association of Greater Washington DC www.evadc.org 2012 Nissan Leaf 36k miles 2016 Kia Soul EV 7k miles 2014

  18. AEO2011_Newell_SENR_Testimony_2 03_11final revised

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... China alone accounts for 78 percent of the total net ... trends; current laws and regulations; and consumer behavior. ... and other State environmental rules; and (4) updates ...

  19. Effect of gamma irradiation on DC electrical conductivity of ZnO nanoparticles

    SciTech Connect

    Swaroop, K.; Somashekarappa, H. M.; Naveen, C. S.; Jayanna, H. S.

    2015-06-24

    The temperature dependent dc electrical conductivity of gamma irradiated Zinc oxide (ZnO) nanoparticles is presented in this paper. The X-ray diffraction (XRD) pattern shows hexagonal wurtzite structure of ZnO. Fourier Transform Infrared Spectroscopy (FTIR) confirms Zn-O stretching vibrations. UV-Visible spectroscopy studies show that the energy band gap (E{sub g}) of the prepared ZnO nanoparticles increases with respect to gamma irradiation dose, which can be related to room temperature dc electrical conductivity. The result shows significant variation in the high temperature dc electrical conductivity of ZnO nanoparticles due to gamma irradiation.

  20. BERAC Meeting April 20-21, 2005 Washington DC | U.S. DOE Office of Science

    Office of Science (SC)

    (SC) 0-21, 2005 Washington DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting April 20-21, 2005 Washington DC Print Text Size: A A A FeedbackShare Page BERAC Meeting April 20-21, 2005 Washington DC Agenda .pdf file (15KB) Presentations Ray Orbach .ppt file (134KB), Advancing Energy,

  1. BERAC Meeting April 29-30, 2004 Washington DC | U.S. DOE Office of Science

    Office of Science (SC)

    (SC) 9-30, 2004 Washington DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting April 29-30, 2004 Washington DC Print Text Size: A A A FeedbackShare Page BERAC Meeting April 29-30, 2004 Washington, DC Agenda .pdf file (15KB) Presentations Ray Orbach .ppt file (1.5MB) Ari Patrinos .ppt

  2. BERAC Meeting December 5-6, 2005 Washington, DC| U.S. DOE Office of Science

    Office of Science (SC)

    (SC) 5-6, 2005 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting December 5-6, 2005 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting December 5-6, 2005 Washington, DC Agenda .pdf file (14KB) Presentations Mike Kuperberg .ppt file (68KB) and Andy Felmy

  3. BERAC Meeting July 10-11, 2006 Washington, DC | U.S. DOE Office of Science

    Office of Science (SC)

    (SC) July 10-11, 2006 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting July 10-11, 2006 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting July 10-11, 2006 Washington, DC Agenda .pdf file (14KB) Presentations James Tiedje .ppt file (123KB), Discussion

  4. BERAC Meeting March 9-11, 2011 Washington, DC | U.S. DOE Office of Science

    Office of Science (SC)

    (SC) March 9-11, 2011 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting March 9-11, 2011 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting March 9-10, 2011 Washington, DC Agenda .pdf file (7KB) Presentations Warren Washington .pptx file (29.0MB), The

  5. The smoothing transformer, a new concept in dc side harmonic reduction of HVdc schemes

    SciTech Connect

    Enright, W.; Arrillaga, J.; Wood, A.R.; Hidalgo, F.P.

    1996-10-01

    Direct connection schemes have been a subject of recent investigation, offering operational flexibility and substantial reductions in ac components. In these schemes the use of active dc filters has been suggested to replace the conventional tuned passive filter design. This paper presents the smoothing transformer as a new means for reducing dc harmonics at characteristic and non-characteristic frequencies using only passive components. A realistic smoothing transformer design is examined using the New Zealand HVdc system operating in the direct connection mode. The steady-state and transient performance of the smoothing transformer design is compared with that of the existing dc smoothing reactor and filter bank.

  6. D.C. Showcases Cutting-Edge Hydrogen Fueling Station Demo | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy D.C. Showcases Cutting-Edge Hydrogen Fueling Station Demo D.C. Showcases Cutting-Edge Hydrogen Fueling Station Demo July 11, 2016 - 2:30pm Addthis Acting Assistant Secretary for Energy Efficiency and Renewable Energy David Friedman speaks at the opening of a hydrogen fueling technology demonstration station in Washington, D.C. | Photos by Mike Mueller/The Hannon Group Acting Assistant Secretary for Energy Efficiency and Renewable Energy David Friedman speaks at the opening of a

  7. BERAC Meeting November 13-14, 2003 Washington, DC | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) 13-14, 2003 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting November 13-14, 2003 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting November 13-14, 2003 Washington, DC Agenda .pdf file (12KB) Presentations Mark Humayun .ppt file (8.4MB),

  8. BERAC Meeting November 29-30, 2007 Washington, DC | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) 29-30, 2007 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting November 29-30, 2007 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting November 29-30, 2007 Washington, DC Agenda .pdf file (9KB) Presentations BER Updates on BERAC Reports Jeff

  9. BERAC Meeting November 3-4, 2004 Washington, DC | U.S. DOE Office of

    Office of Science (SC)

    Science (SC) 3-4, 2004 Washington, DC Biological and Environmental Research Advisory Committee (BERAC) BERAC Home Meetings BERAC Minutes BERAC Minutes Archive Members Charges/Reports Charter .pdf file (135KB) BER Committees of Visitors Federal Advisory Committees BER Home Meetings BERAC Meeting November 3-4, 2004 Washington, DC Print Text Size: A A A FeedbackShare Page BERAC Meeting November 3-4, 2004 Washington, DC Agenda .pdf file (12KB) Presentations George Church .ppt file (5.1MB),

  10. Vehicle Technologies Office Merit Review 2014: High Performance DC Bus Film Capacitor

    Energy.gov [DOE]

    Presentation given by GE Global Research at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  11. Vehicle Technologies Office Merit Review 2015: High Performance DC Bus Film Capacitor

    Energy.gov [DOE]

    Presentation given by GE Global Research at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  12. Grid Modernization Highlighted in Washington DC in September with the Solar Decathlon

    Energy.gov [DOE]

    Smart Grid is on display at the U.S. Department of Energy 2011 Solar Decathlon, held September 23 through October 2 on the National Mall, West Potomac Park, Washington, DC. The decathlon...

  13. Existing Homes Retrofit Case Study: Consortium for Advanced Residential Buildings (CARB), Washington, D.C.

    SciTech Connect

    2009-09-01

    This is a Building America fact sheet describing Consortium for Advanced Residential Buildiings (CARB) whole building retrofit process to renovate a 145-year-old home in Washington, D.C.

  14. Careers and disAbled DC Career Expo | Department of Energy

    Energy.gov [DOE] (indexed site)

    10:00AM to 3:00PM EST Ronald Reagan Building, 1300 Pennsylvania Ave., NW, Washington, DC 20004 POC: Donna Friend More Info Careers & Internships The White House USA.gov Energy.gov...

  15. Dielectric relaxation and conduction in SrTiO{sub 3} thin films under dc bias

    SciTech Connect

    Ang, Chen; Yu, Zhi; Cross, L. E.; Guo, Ruyan; Bhalla, A. S.

    2001-08-06

    The dielectric and conduction behavior of SrTiO{sub 3} thin films deposited on a SrTiO{sub 3} single-crystal substrate is studied. Without dc bias, an obvious dielectric 'defect mode' in the dielectric loss is observed in the temperature range of {approx}100--200 K; however, no noticeable corresponding dielectric constant peak is observed. By applying a high dc bias ({>=}40 kV/cm), a dielectric constant peak with frequency dispersion appears in the same temperature range, the dielectric loss is increased, and simultaneously high dc conduction is observed. The induced dielectric constant peak is related to dc conduction and attributed to the coupling effect of the mobile carriers with the dielectric defect mode. {copyright} 2001 American Institute of Physics.

  16. DC power transmission from the Leningradskaya Nuclear Power Plant to Vyborg

    SciTech Connect

    Koshcheev, L. A.; Shul'ginov, N. G.

    2011-05-15

    DC power transmission from the Leningradskaya Nuclear Power Plant (LAES) to city of Vyborg is proposed. This will provide a comprehensive solution to several important problems in the development and control of the unified power system (EES) of Russia.

  17. DC Pro Software Tool Suite, Data Center Fact Sheet, Industrial Technologies Program

    SciTech Connect

    Not Available

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  18. A highly stable DC power supply for precision magnetic field measurements and other purposes

    SciTech Connect

    Ino, Takashi

    2012-04-15

    A homogeneous magnetic field is essential for the {sup 3}He neutron spin filter used to polarize neutron beams and analyze neutron spins in neutron scattering. The required spatial uniformity of the magnetic field is on the order of 10{sup -4}/cm or less. To measure such uniformity, one needs a DC current source with a current stability much better than 10{sup -4}. However, laboratory DC power supplies, which are commonly used in many {sup 3}He neutron spin filters, do not have such stabilities. To attain a highly stable current with a common laboratory DC power supply for every {sup 3}He neutron spin filter, a simple feedback circuit has been developed to keep the output current stable up to 10{sup -6}. Such a highly stable current or voltage from a common laboratory DC power supply can also be used for various other research applications.

  19. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Home > Linked Open Data Workshop in Washington, D.C. > Posts by term Content Group Activity By term Q & A Feeds Event (2) linked open data (2) LOD (2) notes (1) Open Data (2)...

  20. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Linked Open Data Workshop in Washington, D.C. Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll...

  1. Linked Open Data Workshop in Washington, D.C. - Q & A | OpenEI...

    OpenEI (Open Energy Information) [EERE & EIA]

    - Q & A Home > Linked Open Data Workshop in Washington, D.C. Content Group Activity By term Q & A Feeds No questions have been added to this group yet....

  2. Linked Open Data Workshop in Washington, D.C. | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Groups > Groups > Linked Open Data Workshop in Washington, D.C. Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You...

  3. DC Resistivity Survey (Mise-A-La-Masse) | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    fluid type and phase state of the pore water Thermal: Resistivity influenced by temperature Dictionary.png DC Resistivity Survey (Mise-A-La-Masse): No definition has been...

  4. Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages

    DOEpatents

    Su, Gui-Jia [Knoxville, TN

    2005-11-29

    A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

  5. Report from the Field: Nutrient and Energy Recovery at DC Water

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation by Mark Ramirez, DC Water, during the "Technological State of the Art" panel at the Hydrogen, Hydrocarbons, and Bioproduct Precursors from Wastewaters Workshop held March 18–19, 2015.

  6. DC Microgrids-Part I: A Review of Control Strategies and Stabilization

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Techniques | Argonne National Laboratory I: A Review of Control Strategies and Stabilization Techniques Title DC Microgrids-Part I: A Review of Control Strategies and Stabilization Techniques Publication Type Journal Article Year of Publication 2016 Authors Dragicevic, T, Lu, X, Vasquez, JC, Guerrero, JM Journal IEEE Transaction on Power Electronics Volume 31 Start Page 4876 Issue 7 Pagination 16 Date Published 07012016 ISSN 0885-8993 Keywords coordinated control, DC microgrid, impedance

  7. DC Microgrids-Part II: A Review of Power Architectures, Applications, and

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Standardization Issue | Argonne National Laboratory II: A Review of Power Architectures, Applications, and Standardization Issue Title DC Microgrids-Part II: A Review of Power Architectures, Applications, and Standardization Issue Publication Type Journal Article Year of Publication 2016 Authors Dragicevic, T, Lu, X, Vasquez, JC Journal IEEE Transaction on Power Electronics Volume 31 Start Page 3528 Issue 5 Pagination 22 Date Published 05012016 ISSN 0885-8993 Keywords DC microgrid, power

  8. Local Teams from PA, WV Travel to Washington D.C. for National Science Bowl

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    | netl.doe.gov Regional News Local Teams from PA, WV Travel to Washington D.C. for National Science Bowl Pittsburgh, Pa. - The National Energy Technology Laboratory have sent the regional winners of the southwestern Pennsylvania (SWPA) and West Virginia Science Bowls off to compete in the U.S. Department of Energy National Science Bowl April 28-May 2, 2016, in Washington, D.C. By winning their regional tournaments, the Marshall Middle School (Wexford, PA), Morgantown High School (Morgantown,

  9. Nonlinear modal interaction in HVDC/AC power systems with dc power modulation

    SciTech Connect

    Ni, Y.X.; Vittal, V.; Kliemann, W.; Fouad, A.A.

    1996-11-01

    In this paper investigation of nonlinear modal interaction using the normal form of vector fields technique is extended to HVDC/AC power systems with dc power modulation. The ac-dc interface equations are solved to form a state space model with second order approximation. Using the normal form technique, the system`s nonlinear dynamic characteristics are obtained. The proposed approach is applied to a 4-generator HVDC/AC test power system, and compare with the time domain solution.

  10. Report Now Available: DC Microgrids Scoping Study--Estimate of Technical and Economic Benefits (March 2015)

    Energy.gov [DOE]

    Los Alamos National Laboratory has released a report titled DC Microgrids Scoping Study: Estimate of Technical and Economic Benefits, which presents the results of a study by several national labs and funded by the Office of Electricity Delivery & Energy Reliability. The study provides a preliminary examination of the benefits and drawbacks of potential DC microgrid applications relative to their AC counterparts, using several metrics for comparison, and offers recommendations for potential future research and deployment activities.

  11. EERE Success Story-Washington, D.C. and Tennessee: Bioenergy Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Office Announces Launch of New and Improved KDF | Department of Energy Washington, D.C. and Tennessee: Bioenergy Technologies Office Announces Launch of New and Improved KDF EERE Success Story-Washington, D.C. and Tennessee: Bioenergy Technologies Office Announces Launch of New and Improved KDF January 31, 2014 - 12:00am Addthis In September 2013, the Bioenergy Technologies Office (BETO) launched a revamped, easier-to-use version of the Bioenergy Knowledge Discovery Framework. Initially

  12. DC Motor control using motor-generator set with controlled generator field

    DOEpatents

    Belsterling, Charles A.; Stone, John

    1982-01-01

    A d.c. generator is connected in series opposed to the polarity of a d.c. power source supplying a d.c. drive motor. The generator is part of a motor-generator set, the motor of which is supplied from the power source connected to the motor. A generator field control means varies the field produced by at least one of the generator windings in order to change the effective voltage output. When the generator voltage is exactly equal to the d.c. voltage supply, no voltage is applied across the drive motor. As the field of the generator is reduced, the drive motor is supplied greater voltage until the full voltage of the d.c. power source is supplied when the generator has zero field applied. Additional voltage may be applied across the drive motor by reversing and increasing the reversed field on the generator. The drive motor may be reversed in direction from standstill by increasing the generator field so that a reverse voltage is applied across the d.c. motor.

  13. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    SciTech Connect

    Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

    2011-10-13

    An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly

  14. Slide 1

    Gasoline and Diesel Fuel Update

    Paris, March 1, 2010 1 Richard Newell, SAIS, December 14, 2009 1 Session 2 Biofuels: Continuing Shifts in the Industry and Long-Term Outlook 2010 Energy Conference Key Biofuels Questions * What are the carbon emission impacts of biofuels? - Accounting for direct and indirect impacts? - Climate change legislation (cap and trade, LCFS)? - The present and future for the Renewable Fuel Standard? * What is the future for biofuels tax credits and import tariffs? * What are the implications of the

  15. U.S. Energy Information Administration (EIA) - Conference

    Gasoline and Diesel Fuel Update

    EIA Energy Conference EIA 2010 Energy Conference Agenda EIA Conference 2010 View 2010 EIA Energy Conference transcripts and presentations. Tuesday, April 6 7:30 AM Registration and Badging 7:30 AM - 9:00 AM Continental Breakfast 9:00 AM Plenary Session Welcome: Dr. Richard G. Newell, Administrator, U.S. Energy Information Administration Keynote Addresses: Dr. Steven Chu, Secretary of Energy Dr. Philip Sharp, President, Resources for the Future Steve Bolze, President & CEO, GE Power &

  16. Before the House Energy and Commerce Subcommittee on Energy and Power |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Power Before the House Energy and Commerce Subcommittee on Energy and Power Before the House Energy and Commerce Subcommittee on Energy and Power By: Richard Newell, Administrator Energy Information Administration Subject: "The Effects of Middle East Events on U.S. Energy Markets" 2.10.11_Final_EIA_Testimony.pdf (86.18 KB) More Documents & Publications Before the Senate Energy and Natural Resources Committee Before the House Natural Resources Committee

  17. Before the House Natural Resources Committee | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Natural Resources Committee Before the House Natural Resources Committee Before the House Natural Resources Committee By: Richard Newell, Administrator Energy Information Administration Subject: Harnessing American Resources to Create Jobs; and Addressing Rising Gasoline Prices Final_Testimony(21).pdf (66.37 KB) More Documents & Publications Before the Senate Energy and Natural Resources Committee Before the House Energy and Commerce Subcommittee on Energy and Power Testimony Before the

  18. Before the Senate Agriculture, Nutrition, and Forestry | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry Before the Senate Agriculture, Nutrition, and Forestry By: Richard Newell, Administrator Energy Information Administration Subject: Development in Energy Markets and their possible implications on Agriculture Final_Testimony(22).pdf (32.7 KB) More Documents & Publications Before the Committee on Agriculture Subcommittee on General Farm Commodities and Risk Management Hearing Before the

  19. Performance Study of K2CsSb Photocathode inside a DC High Voltage Gun

    SciTech Connect

    T. Rao, J. Smedley, J.M. Grames, R. Mammei, J.L. McCarter, M. Poelker, R. Suleiman

    2011-03-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K2CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the GaAs:Cs in RF injector and the K2CsSb cathode in the DC gun in order to widen our choices. Since the multialkali cathode is a compound with uniform stochiometry over its entire thickness, we anticipate that the life time issues seen in GaAs:Cs due surface damage by ion bombardment would be minimized with this material. Hence successful operation of the K2CsSb cathode in DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of K2CsSb cathode in a DC gun, we have designed and built a load lock system that would allow the fabrication of the cathode at BNL and its testing at JLab. In this paper, we will present the design of the load-lock system, cathode fabrication, and the cathode performance in the preparation chamber and in the DC gun.

  20. Performance Study of K2CsSb Photocathode Inside a DC High Voltage Gun

    SciTech Connect

    McCarter J. L.; Rao T.; Smedley, J.; Grames, J.; Mammei, R.; Poelker, M.; Suleiman, R.

    2011-09-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K{sub 2}CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the K{sub 2}CsSb photocathode inside a DC gun. Since the multialkali cathode is a compound with constant characteristics over its entire thickness, we anticipate that the lifetime issues seen in GaAs:Cs due to surface damage by ion bombardment would be minimized. Hence successful operation of the K{sub 2}CsSb cathode in a DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of a K{sub 2}CsSb cathode in a DC gun, we have designed and built a load lock system that allows the fabrication of the cathode at Brookhaven National Lab (BNL) and its testing at Jefferson Lab (JLab). In this paper, we will present the performance of the K{sub 2}CsSb photocathode in the preparation chamber and in the DC gun.

  1. One-dimensional hybrid simulation of the dc/RF combined driven capacitively coupled CF{sub 4} plasmas

    SciTech Connect

    Wang Shuai [School of Science, Northeastern University, Shenyang 110891 (China); Xu Xiang; Wang Younian [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2012-11-15

    We developed a one-dimensional hybrid model to simulate the dc/RF combined driven capacitively coupled plasma for CF{sub 4} discharges. The numerical results show the influence of the dc source on the plasma density distribution, ion energy distributions (IEDs), and ion angle distributions (IADs) on both RF and dc electrodes. The increase of dc voltage impels more ions with high energy to the electrode applied to the dc source, which makes the IEDs at the dc electrode shift toward higher energy and the peaks in IADs shift toward the small angle region. At the same time, it also decreases ion-energy at the RF electrode and enlarges the ion-angles which strike the RF electrode.

  2. The National Science Bowl Students are Here! (The Streets of D.C. Just Got a Little Smarter.)

    Energy.gov [DOE]

    Hundreds of America’s best science high school and middle school students are arriving in D.C. today to gear up for the National Science Bowl.

  3. Secretary Moniz's Keynote Address at the ARPA-E Summit in Washington D.C.

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    -- As Delivered | Department of Energy Keynote Address at the ARPA-E Summit in Washington D.C. -- As Delivered Secretary Moniz's Keynote Address at the ARPA-E Summit in Washington D.C. -- As Delivered February 26, 2014 - 5:18pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Well, thank you, Dan (Poneman). As Dan indicated, we go back a ways and if you look at Secretaries and Deputy Secretaries and Acting Secretaries of the Department of Energy, I'm pretty sure that Dan is the

  4. Persons Who Received the DC PSC's Emergency Petition and Complaint via

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    E-mail on August 24, 2005 | Department of Energy Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on August 24, 2005 Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on August 24, 2005 Docket No. EO-05-01: In response to your August 29, 2005 letter, attached please find a list of all entities and organizations to whom we served the District of Columbia Public Service Commission's (HOC PSC") Petition and Complaint filed on August

  5. Energy Department to Host Biomass 2012 Conference in Washington, D.C |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Biomass 2012 Conference in Washington, D.C Energy Department to Host Biomass 2012 Conference in Washington, D.C July 9, 2012 - 4:52pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - On July 10-11, the U.S. Department of Energy will host its fifth annual conference, Biomass 2012: Confronting Challenges, Creating Opportunities - Sustaining a Commitment to Bioenergy. Biomass 2012 will bring together hundreds of diverse stakeholders in the public and private sectors

  6. A room temperature electron cyclotron resonance ion source for the DC-110 cyclotron

    SciTech Connect

    Efremov, A. Bogomolov, S.; Lebedev, A.; Loginov, V.; Yazvitsky, N.

    2014-02-15

    The project of the DC-110 cyclotron facility to provide applied research in the nanotechnologies (track pore membranes, surface modification of materials, etc.) has been designed by the Flerov Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research (Dubna). The facility includes the isochronous cyclotron DC-110 for accelerating the intensive Ar, Kr, Xe ion beams with 2.5 MeV/nucleon fixed energy. The cyclotron is equipped with system of axial injection and ECR ion source DECRIS-5, operating at the frequency of 18 GHz. This article reviews the design and construction of DECRIS-5 ion source along with some initial commissioning results.

  7. Solar Decathlon at Home in the D.C. Community | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    at Home in the D.C. Community Solar Decathlon at Home in the D.C. Community December 4, 2012 - 4:25pm Addthis One of the new homeowners, Layika Culley, and her family cut the ribbon to her new ultra-efficient home in the historic Deanwood neighborhood. For more photos of the Empowerhouse ribbon cutting, <a href="/node/580963">view our photo gallery</a>. | Photo courtesy of Sarah Gerrity, Energy Department. One of the new homeowners, Layika Culley, and her family cut the

  8. Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Security 40 Years after the Embargo - As Delivered | Department of Energy CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered October 24, 2013 - 11:27am Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Well, thank you, John. I was actually planning to make a long presentation, but I will, in real time, convert it to a short

  9. Video: Lab-Corps Third Cohort Graduates in Washington, D.C. | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Lab-Corps Third Cohort Graduates in Washington, D.C. Video: Lab-Corps Third Cohort Graduates in Washington, D.C. August 25, 2016 - 2:10pm Addthis Learn More About Lab-Corps Some of the nation's top researchers recently graduated from the Office of Energy Efficiency and Renewable Energy's Lab-Corps program designed to help scientists better understand the commercialization process. Addthis Related Articles Graduates Reflect on Energy Department's Lab-Corps Program National Lab

  10. D.C. Hydrogen Fuel Station Demonstration Facility | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    D.C. Hydrogen Fuel Station Demonstration Facility D.C. Hydrogen Fuel Station Demonstration Facility Addthis Description Below is the text version for the "D.C. Hydrogen Fuel Station Demonstration Facility" video. Text Version The video opens with six men at a ribbon-cutting ceremony. The crowd counts down 3-2-1. The men cut the ribbons, and everyone cheers. Text appears: Energy.gov presents In Partnership with the National Park Service, The Office of Energy Efficiency and Renewable

  11. Development of insulation structure and enhancement of insulation reliability of 500 kV dc GIS

    SciTech Connect

    Hasegawa, T.; Yamaji, K.; Hatano, M.; Endo, F.; Rokunohe, T.; Yamagiwa, T.

    1997-01-01

    The paper describes the development of insulation structure and enhancement of insulation reliability of 500 kV dc GIS. Considering problems of metallic particles and charge accumulation on spacers, the developed insulation structure of GIS consisted of three regions, i.e., the spacer, particle scavenging and non-levitating regions. Particles could be efficiently scavenged, and the developed GIS withstood all insulation specifications with sufficient margins under the clean and particle-contaminated conditions. Now, a long-term site test for one year of the 500 kV dc GIS has been continued since October 1995.

  12. Microsoft Word - Sharp_plenary.docx

    Gasoline and Diesel Fuel Update

    Phil Sharp, President, Resources for the Future by EIA Administrator Richard Newell Richard: Thank you, Mr. Secretary for your remarks. So, excellent. So, yes. I'd now like to invite Phil Sharp and Steve Bolze up to the stage. Secretary Chu actually is staying with us, but in the audience, attesting to the remarks we're about to get which I think are going to be quite insightful. Our next distinguished speaker is Dr. Phil Sharp, President of Resources for the Future. RFF is a non-profit and

  13. IMPLEMENTATION OF A DC BUMP AT THE STORAGE RING INJECTION STRAIGHT SECTION

    SciTech Connect

    Wang, G.M.; Shaftan, T.; Kramer, S.K.; Fliller, R.; Guo, W.; Heese, R.; Yu, L.H.; Parker, B.; Willeke, F.J.

    2011-03-28

    The NSLS II beam injection works with a DC septum, a pulsed septum and four fast kicker magnets. The kicker power supplies each produce a two revolution period pulsed field, 5.2 {micro}s half sine waveform, using {approx}5kA drive voltage. The corresponding close orbit bump amplitude is {approx}15mm. It is desired that the bump is transparent to the users for top-off injection. However, high voltage and short pulse power supplies have challenges to maintain pulse-to-pulse stability and magnet-to-magnet reproducibility. To minimize these issues, we propose implementing a DC local bump on top of the fast bump to reduce the fast kicker strength by a factor of 2/3. This bump uses two storage ring corrector magnets plus one additional magnet at the septum to create a local bump. Additionally, these magnets could provide a DC bump to simulate the septum position effects on the store beam lifetime. This paper presents the detail design of this DC injection bump and related beam dynamics.

  14. Operation of the DC current transformer intensity monitors at FNAL during run II

    SciTech Connect

    Crisp, J.; Fellenz, B.; Heikkinen, D.; Ibrahim, M.A.; Meyer, T.; Vogel, G.; /Fermilab

    2012-01-01

    Circulating beam intensity measurements at FNAL are provided by five DC current transformers (DCCT), one per machine. With the exception of the DCCT in the Recycler, all DCCT systems were designed and built at FNAL. This paper presents an overview of both DCCT systems, including the sensor, the electronics, and the front-end instrumentation software, as well as their performance during Run II.

  15. Optical Investigations of Dust Particles Distribution in RF and DC Discharges

    SciTech Connect

    Ramazanov, T. S.; Dosbolayev, M. K.; Jumabekov, A. N.; Amangaliyeva, R. Zh.; Filatova, I. I.; Azharonok, V. V.

    2008-09-07

    Optical emission spectroscopy is used to study dust particles movement and conditions of a formation of ordered plasma-dust structures in a capacitively coupled RF discharge. 3D binocular diagnostics of plasma-dust structures in dc discharge was made.

  16. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2001-07-12

    To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

  17. Students Recognized in Washington, D.C. for their Winning Bioenergy Infographic

    Energy.gov [DOE]

    A team of five freshmen from Williamsburg High School for Architecture and Design in Brooklyn, New York—designed an infographic on the benefits of cellulosic ethanol and were invited as guests to the eight annual conference, Bioenergy 2015, in Washington, D.C.

  18. Ions in solution: Density corrected density functional theory (DC-DFT)

    SciTech Connect

    Kim, Min-Cheol; Sim, Eunji; Burke, Kieron

    2014-05-14

    Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO·Cl{sup −} and HO·H{sub 2}O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.

  19. Photon assisted processes: Probability amplitudes for the absorption and emission of photons and dc-photocurrents

    SciTech Connect

    Micu, C.; Racolta, D.; Papp, E.

    2014-11-24

    In this paper one deals with the derivation of probability amplitudes characterizing the photon assisted injection of electrons in a two-terminal quantum conductor. For this purpose one accounts for spatially constant but time dependent periodic voltages applied on an Ohmic contact. Resorting to the discrete Fourier transform provides the probability amplitudes for the emission and absorption of photons in terms of squared Bessel functions of the first kind and integer order. Several kinds of ac-pulses like sinusoidal and dc+sinusoidal are assumed. Mean square values concerning photon numbers have been discussed in some more detail. Time averages of squared time dependent classical currents and leading corrections to the rescaled dc-photocurrent have also been accounted for.

  20. Switch contact device for interrupting high current, high voltage, AC and DC circuits

    DOEpatents

    Via, Lester C.; Witherspoon, F. Douglas; Ryan, John M.

    2005-01-04

    A high voltage switch contact structure capable of interrupting high voltage, high current AC and DC circuits. The contact structure confines the arc created when contacts open to the thin area between two insulating surfaces in intimate contact. This forces the arc into the shape of a thin sheet which loses heat energy far more rapidly than an arc column having a circular cross-section. These high heat losses require a dramatic increase in the voltage required to maintain the arc, thus extinguishing it when the required voltage exceeds the available voltage. The arc extinguishing process with this invention is not dependent on the occurrence of a current zero crossing and, consequently, is capable of rapidly interrupting both AC and DC circuits. The contact structure achieves its high performance without the use of sulfur hexafluoride.

  1. Demonstration of cathode emittance dominated high bunch charge beams in a DC gun-based photoinjector

    SciTech Connect

    Gulliford, Colwyn Bartnik, Adam Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-03-02

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (≥100 pC) beams produced in the DC gun-based Cornell energy recovery linac photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittances measured at 9–9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs and Free Electron Lasers.

  2. If you reside in WASHINGTON, DC - MD -VA- WV your salary will range from:

    National Nuclear Security Administration (NNSA)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, Eastern WV, and Southern PA) your salary will range from: Pay Band Pay Plan(s) Minimum Maximum Developmental EN $49,246 $74,872 01 EK/EJ $34,075 $58,511 02 EK/EJ $51,630 $84,855 03 EK/EJ/EN $74,872 $119,238 04 EK/EJ/EN $105,211 $165,300 05 EK/EJ/EN $148,510 $165,300 If you are employed in OAKLAND/LIVERMORE, CA your salary will range from: Pay Band Pay Plan(s) Minimum Maximum Developmental EN $53,579

  3. Smartgrid EV Communication module (SpEC) SAE DC Charging Digital

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Communication Controller - Energy Innovation Portal Electricity Transmission Electricity Transmission Find More Like This Return to Search Smartgrid EV Communication module (SpEC) SAE DC Charging Digital Communication Controller Argonne National Laboratory Contact ANL About This Technology Technology Marketing Summary One of the major drawbacks of electric vehicles (EVs) is the long period of time required to recharge EV batteries. While regular Alternating Current (AC) charging systems are

  4. VUV generation by adiabatically expanded and excited by a DC electrical discharge Argon gas

    SciTech Connect

    Pipergias, K.; Yasemidis, D.; Reppa, E.; Pentaris, D.; Efthimiopoulos, T.; Merlemis, N.; Giannetas, V.

    2010-11-10

    We investigate the emission of Argon (Ar) gas which is adiabatically expanded through a nozzle and excited using a DC electrical discharge. Because of the expansion and the electronic excitation, Ar dimers and clusters are formed, which give radiation in the second (2nd) and in the third (3rd) continua of Ar, centered at about 126 and 254 nm respectively. We particularly focus our study on the 2nd continuum, in order to develop a laser at this wavelength.

  5. Round-robin artificial contamination test on high voltage dc insulators

    SciTech Connect

    Naito, K.; Schneider, H.M.

    1995-07-01

    This paper summarizes the results of a worldwide round-robin test of high voltage dc (HVDC) insulators, which was carried out in six laboratories aiming at standardization of the method for artificial contamination tests on HVDC insulators. Flashover characteristics of three kinds of specimens were evaluated by the clean fog and the salt fog procedures. Sufficient information is now available to allow the preparation of provisional international specifications for artificial contamination testing of HVDC insulators.

  6. D-C electric arc furnace -- A trend-setting technology in steelmaking

    SciTech Connect

    Muller, H.G.; Patuzzi, A.A. ); Nix, E.H. )

    1994-05-01

    Advantages of the d-c furnace in comparison with the a-c system include: a major reduction in electrode consumption; lower power consumption; less flicker; and improved temperature and composition control. Of the four basic types of bottom electrode (anode) design, the fin-type system provides closer control of arc behavior. With a current maximum tapping weight of 150 tons, full potential is limited by the maximum diameter of available electrodes.

  7. D.C. Community Comes Together in the Name of Sustainability, Affordability

    Energy.gov [DOE] (indexed site)

    | Department of Energy Community leaders and members of the The New School for Design and Stevens Institute of Technology Solar Decathlon team.| Courtesy of Lisa Bleich Community leaders and members of the The New School for Design and Stevens Institute of Technology Solar Decathlon team.| Courtesy of Lisa Bleich Erin R. Pierce Erin R. Pierce Former Digital Communications Specialist, Office of Public Affairs What are the key facts? This 2011 Solar Decathlon team is partnering with D.C.

  8. Method of measuring the dc electric field and other tokamak parameters

    DOEpatents

    Fisch, Nathaniel J.; Kirtz, Arnold H.

    1992-01-01

    A method including externally imposing an impulsive momentum-space flux to perturb hot tokamak electrons thereby producing a transient synchrotron radiation signal, in frequency-time space, and the inference, using very fast algorithms, of plasma parameters including the effective ion charge state Z.sub.eff, the direction of the magnetic field, and the position and width in velocity space of the impulsive momentum-space flux, and, in particular, the dc toroidal electric field.

  9. Ultraviolet and electron irradiation of DC-704 siloxane oil in zinc orthotitanate paint

    SciTech Connect

    Mossman, D.L.; Barsh, M.K.; Greenberg, S.A.

    1982-01-01

    Discrepancies exist between accelerated laboratory simulation and geosynchronous orbit flight data for zinc orthotitanate (ZOT) paint degradation. The effects of ultraviolet and electron irradiation on ZOT contaminated with DC-704 silicone oil are reported. In-situ solar absorptance and emittance changes for contaminated and clean specimens are discussed with reference to post-test surface morphology, determined by scanning electron microscope analysis. Features of the contaminated ZOT degradation kinetics correlate with orbital performance.

  10. PPPL engineers design and build state-of-the-art controller for AC to DC

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    converter that manages plasma in upgraded fusion machine | Princeton Plasma Physics Lab engineers design and build state-of-the-art controller for AC to DC converter that manages plasma in upgraded fusion machine By Raphael Rosen March 7, 2016 Tweet Widget Google Plus One Share on Facebook PPPL scientists Robert Mozulay and Weiguo Que (Photo by Hans Schneider) PPPL scientists Robert Mozulay and Weiguo Que Gallery: A digital firing generator installed in NSTX-U (Photo by Hans Schneider) A

  11. PPPL engineers design and build state-of-the-art controller for AC to DC

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    converter that manages plasma in upgraded fusion machine | Princeton Plasma Physics Lab engineers design and build state-of-the-art controller for AC to DC converter that manages plasma in upgraded fusion machine By Raphael Rosen March 7, 2016 Tweet Widget Google Plus One Share on Facebook PPPL scientists Robert Mozulay and Weiguo Que (Photo by Hans Schneider) PPPL scientists Robert Mozulay and Weiguo Que Gallery: One of the digital firing generators installed in NSTX-U (Photo by Hans

  12. Report from the Field: Nutrient and Energy Recovery at DC Water

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BLUE PLAINS - WASHINGTON DC NUTRIENT & ENERGY RECOVERY FACILITY DCWater - Mark Ramirez mramirez@dcwater.com District of Columbia Water and Sewer Authority George S. Hawkins, General Manager 2 We have been recognized as a profession that protects the environment and public health. We are now beginning to be recognized as resource stewards, needing to recover and utilize valuable and important resources as well. Introduction WATER RESOURCE RECOVERY FACILITY OUR VISION CLEAN WATER - PROCESSES

  13. DOE/EIA-0202(86/3Q) Energy Information Administration Washington, DC

    Gasoline and Diesel Fuel Update

    3Q) Energy Information Administration Washington, DC Energy Outlook Quarterly Projections July 1986 t rt ort .ort lort lort nort iort lort \ort ort Tt "t- . m .erm Term Term Term Term Term Term Term Term Term Term Term Term Term Term Term xrm uergy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Energy Enbrgy ^nergy -OJ.VJUK Outlook Outlook Outlook Outlook Outlook Outlook Outlook Outlook Outlook Outlook

  14. Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front

    DOEpatents

    Dawson, J.M.; Mori, W.B.; Lai, C.H.; Katsouleas, T.C.

    1998-07-14

    Method and apparatus ar disclosed for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing. 4 figs.

  15. Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front

    DOEpatents

    Dawson, John M.; Mori, Warren B.; Lai, Chih-Hsiang; Katsouleas, Thomas C.

    1998-01-01

    Method and apparatus for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing.

  16. DC graphite arc furnace, a simple system to reduce mixed waste volume

    SciTech Connect

    Wittle, J.K.; Hamilton, R.A.; Trescot, J.

    1995-12-31

    The volume of low-level radioactive waste can be reduced by the high temperature in a DC Graphite Arc Furnace. This volume reduction can take place with the additional benefit of having the solid residue being stabilized by the vitrified product produced in the process. A DC Graphite Arc Furnace is a simple system in which electricity is used to generate heat to vitrify the material and thermally decompose any organic matter in the waste stream. Examples of this type of waste are protective clothing, resins, and grit blast materials produced in the nuclear industry. The various Department of Energy (DOE) complexes produce similar low-level waste streams. Electro-Pyrolysis, Inc. and Svedala/Kennedy Van Saun are engineering and building small 50-kg batch and up to 3,000 kg/hr continuous feed DC furnaces for the remediation, pollution prevention, and decontamination and decommissioning segments of the treatment community. This process has been demonstrated under DOE sponsorship at several facilities and has been shown to produce stable waste forms from surrogate waste materials.

  17. Collection efficiency of ultrafine particles by an electrostatic precipitator under DC and pulse operating modes

    SciTech Connect

    Zukeran, Akinori; Looy, P.C.; Chakrabarti, A.; Berezin, A.A.; Jayaram, S.; Cross, J.D.; Ito, Tairo; Chang, J.S.

    1999-10-01

    High particle collection efficiency in terms of particle weight/volume mg/m{sup 3} is well achieved by a conventional electrostatic precipitator (ESP). However, the collection efficiencies in terms of number density for the ultrafine (particle size between 0.01--0.1 {micro}m) or submicrometer particles by a conventional ESP are still relatively low. Therefore, it is necessary to improve the collection efficiency for ultrafine particles. In this paper, attempts have been made to improve the ultrafine particle collection efficiency by controlling dust loading, as well as using the short pulse energizations. The present version of the ESP consists of three sets of wire-plate-type electrodes. For the ESP under dc operation modes, experimental results show that the collection efficiency for dc applied voltage decreases with increasing dust loading when particle density is larger than 2.5 x 10{sup 10} particles/m{sup 3} due to inefficient collections of ultrafine particles. However, under pulse operating modes without dc bias, high particle collection efficiency for ultrafine particles was obtained, which is thought to be due to the enhancement of particle charging by electrons.

  18. WASHINGTON. DC.

    Office of Legacy Management (LM)

    . . : ' ; ,.' . . ; . . .."C.. ,:. . . ...;..?n:,.;,, , ," .L,: ' ..: ' I I. P.O. Box 36 ,, ,,,,: ,.,.:... . . Brorarw Btotlrn . St. Louis, 105cnlr1 - %A. WO. LB - FCA...

  19. Washington, DC'

    Office of Legacy Management (LM)

    If you have any questionsplease feel free to.call me at 3dli427-1721 or Dr. W. Alexander Williams (301-427-17.19) of my staff...; : , Enclosures 'Off-SiteSavannah RiverDivision ...

  20. Residential Energy Efficiency Research Planning Meeting Summary Report: Washington, D.C. - October 27-28, 2011

    SciTech Connect

    Not Available

    2012-02-01

    This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Residential Energy Efficiency Research Planning meeting, held on October 28-29, 2011, in Washington, D.C.

  1. Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing

    Energy.gov [DOE]

    Presentation given by Idaho National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about DC fast charging...

  2. Data:12a45141-7972-4ec8-a2dc-37fedc8133d3 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ec8-a2dc-37fedc8133d3 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  3. Data:7a23ab07-5468-48dc-947a-679327ca61e0 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    dc-947a-679327ca61e0 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  4. Comparative Study of DC and AC Microgrids in Commercial Buildings Across Different Climates and Operating Profiles: Preprint

    SciTech Connect

    Fregosi, D.; Ravula, S.; Brhlik, D.; Saussele, J.; Frank, S.; Bonnema, E.; Scheib, J.; Wilson, E.

    2015-04-22

    Bosch has developed and demonstrated a novel DC microgrid system designed to maximize utilization efficiency for locally generated photovoltaic energy while offering high reliability, safety, redundancy, and reduced cost compared to equivalent AC systems. Several demonstration projects validating the system feasibility and expected efficiency gains have been completed and additional ones are in progress. This work gives an overview of the Bosch DC microgrid system and presents key results from a large simulation study done to estimate the energy savings of the Bosch DC microgrid over conventional AC systems. The study examined the system performance in locations across the United States for several commercial building types and operating profiles and found that the Bosch DC microgrid uses generated PV energy 6%–8% more efficiently than traditional AC systems.

  5. Richard S. Middleton | Department of Energy

    Energy Saver

    National Laboratories. He works on carbon capture and storage, geothermal energy, shale gas and the energy-water nexus. Most Recent Plastic Bags Might Kickstart the Carbon ...

  6. Benjamin Richards > Member - Hanrath Group > Researchers, Postdocs...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    to be implemented in battery applications; recently, he has experimented in nanowire solar cell applications. Ben's research involves varying parameters of a scaled process to find...

  7. Richard E. Smalley, Buckminsterfullerene (the Buckyball), and...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Smalley was born June 6, 1943, received a B.S. degree from the University of Michigan in 1965, and received a Ph.D. from Princeton in 1973. He began work at Rice University in 1976 ...

  8. Richard Gerber! Harvey Wasserman! Requirements Reviews Organizers

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    9, 2 014 Requirements Reviews * 1½-day reviews with each Program Office * Computing and storage requirements for next 5 years * Participants - DOE ADs & Program Managers - Leading NERSC users & key potential users - NERSC staff 2 High Energy Physics Fusion R esearch Adv. C omp. S cience R esearch J an. 2 014 Basic E nergy S ciences O ct 2 014 Reports From 8 Requirements Reviews Have Been Published 3 h@p://www.nersc.gov/science/hpc---requirements---reviews/reports/ * CompuFng a nd s

  9. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    December 2013 --- 1 --- December 1 2, 2 013 Connection Info --- 2 --- Connec*on I nfo Topic: N UG W eb C onference Date a nd T ime: Thursday, D ec. 1 2, 2 013 1 1:00 a m, P acific S tandard T ime Event n umber: 6 60 4 80 2 94 Event p assword: e dison hNps://nersc---training.webex.com/ --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Teleconference i nforma*on

  10. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    January 2013 --- 1 --- January 1 0, 2 013 Connection Info --- 2 --- Connec*on I nfo Topic: N UG W eb C onference Date a nd T ime: Thursday, J anuary 1 0, 2 013 1 1:00 a m, P acific S tandard T ime ( San F rancisco, G MT---08:00) Event n umber: 6 66 6 25 9 79 Event p assword: h opper hSps://nersc---training.webex.com/ a nd c hose f rom t he l ist o f e vents.

  11. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    June 2013 --- 1 --- June 6 , 2 013 Connection Info --- 2 --- Connec*on I nfo Topic: N UG W eb C onference Date a nd T ime: Thursday, J une 6 , 2 013 1 1:00 a m, P acific D aylight T ime ( San F rancisco, G MT---07:00) Event n umber: 6 62 3 77 6 26 Event p assword: e dison hRps://nersc---training.webex.com/ a nd c hose f rom t he l ist o f e vents.

  12. Richard Gerber! NERSC User Services Next Steps

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Next Steps --- 1 --- September 10, 2013 Explore the NERSC Web Site * "For U sers" S ec5on - Documenta-on - Announcements - Training - My N ERSC - Job L ogs a nd A naly-cs - Help * Live Status - MOTD, O utages, J ob Q ueues * Events --- 2 --- Help Desk * Online - hGps://help.nersc.gov/ - Submit, u pdate, a nd r eview t rouble - ckets - Submit q uota i ncrease f orms * Email - consult@nersc.gov - accounts@nersc.gov * Phone - 1---800---666---3772 ( 1---800---66---NERSC) - Consultants 8

  13. Richard Gerber! NERSC! User Services Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    t ry s ome a nd s ee w hat works f or y ou - Totalview a nd D DT d ebuggers - PAPI, T au, v arious r esearch t ools, & v endor---specific performance t ools * Common c ode p roblems * How t ools w ork i n g eneral * Be s uspicious o f o utliers a mong p arallel t asks * Where t o g et m ore i nforma:on 3 Debugging 4 What is a Bug? * A b ug i s w hen y our c ode - crashes - hangs ( doesn't fi nish) - gets i nconsistent a nswers - produces w rong a nswers - behaves i n a ny w ay y ou d idn't

  14. Richard Gerber! NERSC! User Services Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Totalview a nd D DT d ebuggers - PAPI, T au, & v endor---specific p erformance t ools * Common c ode p roblems * How t ools w ork i n g eneral * Use t he t ools t hat w orks f or y ou a nd a re a ppropriate f or your p roblem * Be s uspicious o f o utliers a mong p arallel t asks * Where t o g et m ore i nforma:on 3 Debugging 4 What is a Bug? * A b ug i s w hen y our c ode - crashes - hangs ( doesn't fi nish) - gets i nconsistent a nswers - produces w rong a nswers - behaves i n a ny w ay y

  15. Dr. Richard A. Meserve | Department of Energy

    Energy.gov [DOE] (indexed site)

    The Carnegie Institution conducts basic research in biology, astronomy and geophysics. As Chairman of the NRC, Meserve served as the principal executive officer of the federal ...

  16. Richard P. Feynman Center for Innovation

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Revision Policy for EIA Weekly Underground Natural Gas Storage Estimates Latest Update: November 16, 2015 This report consists of the following sections: General EIA Weekly Natural Gas Storage Report Revisions Policy - a description of how revisions to the Weekly Natural Gas Storage Report estimates may occur EIA Weekly Natural Gas Storage Report Policy to Allow Unscheduled Release of Revisions - a description of the policy that will be implemented in the event of an out-of-cycle release

  17. Richard Gerber! NERSC Senior Science Advisor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    5 User Survey Results - 1 - March 23, 2016 Customer Satisfaction 2 * Annual NERSC User Survey * Users score NERSC using a 1-7 scale - 7 Very satisfied - 6 Mostly satisfied - 5 Somewhat satisfied - 4 Neutral - 3 Somewhat dissatisfied - 2 Mostly dissatisfied - 1 Very dissatisfied * Minimum satisfactory score 5.25 * 729 survey respondents - Similar response rate as in previous years (~10%) - Represents 63% of raw hours used on NERSC systems - 3 - - 5 - - 6 - - 7 - Greatest Areas of Satisfaction and

  18. Richard Cogdell | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    structures only have rather low resolution. Director of the Institute of Molecular Cell and Systems Biology Bio In the News: 11715:: Glasgow Unidiscovery set to solve energy...

  19. Richard Burdett Geothermal Facility | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    processes (afday) Daily Operation Water Use (afday) Well Field Water Use (afday) Cooling Tower Water use (annual average) (afday) Cooling Tower Water use (summer average) (af...

  20. Richard P. Feynman and the Feynman Diagrams

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... Dispersion of the Neutron Emission in U235 Fission, DOE Technical Report Quark Elastic Scattering as a Source of High-transverse-momentum Mesons; Physical Review D, Vol. 15, Issue ...

  1. Process Laboratory Gustafson, Richard [University of Washington...

    Office of Scientific and Technical Information (OSTI)

    bioconversion steam explosion reactor and ancillary equipment such as a high pressure boiler and a fermenter to support the bioconversion process research. This equipment has been...

  2. Richard P. Feynman and the Feynman Diagrams

    Office of Scientific and Technical Information (OSTI)

    In 1950 he became professor of theoretical physics at the California Institute of Technology (Caltech), where he remained the rest of his career. ... Feynman's lectures at Caltech ...

  3. Richard E. Smalley, Buckminsterfullerene (the Buckyball), and...

    Office of Scientific and Technical Information (OSTI)

    conducted extensive research in cluster chemistry and in cold ion beam technology and is ... Award and the 1996 Nobel Prize in Chemistry, which he shares with Robert F. Curl, ...

  4. Microsoft PowerPoint - 5 Richard Abitz

    Office of Environmental Management (EM)

    ... documented by Jacobs (2015) STOMP software (Version 1.3) Developed at PNNL under NQA-1-2000 software requirements Verification & validation (White & Oostrom, 2000 & 2006) ...

  5. Richard Gerber! NERSC Senior Science Advisor

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NERSC 2014 User Survey Preliminary Results --- 1 --- May 2 7, 2 015 --- 2 --- --- 3 --- --- 4 --- --- 5 --- Thank you. --- 2 2...

  6. High Performance Computing Richard F. BARRETT

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... particle push vs. particle Just the communication (halo exchange) per-core compute load ... (Green Flash) 8, Seismic Imaging (Green Wave) 13, and an automated co-tuning process ...

  7. Richard Sayre | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    12:: Artificial photosynthesis: Make your own fuel and change the world 041212:: Elsevier Launches New Journal Algal Research 041512:: A.I.M. interview with Dr. Jose...

  8. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... 4 --- Fair Share Scheduling Experiment on Edison * What a re c urrent u sage g oals? - DARPA M ission P artners: 2 5% - Each D OE O ffice g ets a s hare o f t he r emaining 7 5% b ...

  9. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    a bout j obs " jumping i n l ine" - DARPA m ission p artner u sage i s i ncreasing, ... a s t hey request.) DARPA Mission Partner Usage --- 1 2 --- DARPA u sage i s increasing. ...

  10. Richard Gerber! NERSC User Services NUG Teleconference

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ( 514 m illion H opper e quivalent) * S?ll undergoing system evalua?on and tes?ng - DARPA m ission p artners ( 11 m illion h ours) - NERSC - Cray * Outstanding i ssue - node f ...

  11. Richard King: Principal Scientist, Spectrolab, Inc. | Center...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Dr. King is Principal Scientist and Technical Fellow responsible for Photovoltaic Cell R&D at Spectrolab, Inc. His research on photovoltaics over the last 25 years has explored ...

  12. Pulsed DC magnetron sputtered piezoelectric thin film aluminum nitride – Technology and piezoelectric properties

    SciTech Connect

    Stoeckel, C. Kaufmann, C.; Hahn, R.; Schulze, R.; Billep, D.; Gessner, T.

    2014-07-21

    Pulsed DC magnetron sputtered aluminum nitride (AlN) thin films are prepared on several seed layers and at different sputtering conditions. The piezoelectric c-axis (002) orientation of the AlN is analyzed with X-ray diffraction method. The transverse piezoelectric coefficient d{sub 31} is determined with a Laser-Doppler-Vibrometer at cantilevers and membranes by analytical calculations and finite element method. Additionally, thin film AlN on bulk silicon is used to characterize the longitudinal piezoelectric charge coefficient d{sub 33}.

  13. DOEINVIl0845-51 DC-703 GROUNDWATER FLOW NEAR THE SHOAL SITE,

    Office of Legacy Management (LM)

    DOEINVIl0845-51 DC-703 GROUNDWATER FLOW NEAR THE SHOAL SITE, SAND SPRINGS RANGE, NEVADA: IMPACT OF DENSITY-DRIVEN FLOW Prepared by Jenny Chapman, Todd Mihevc, and Alan McKay Submitted to Nevada Operations Office U.S. Department of Energy Las Vegas, Nevada September 1994 Publication #45130 This report was prepared as an account of work sponsored by the United States Government Neither the United States nor the United States Department of Energy, nor any of their employees, makes any warranty,

  14. Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC

    SciTech Connect

    Miller, Naomi J.; Rosenfeld, Scott M.

    2012-06-22

    This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

  15. MHD simulations of DC helicity injection for current drive in tokamaks

    SciTech Connect

    Sovinec, C.R.; Prager, S.C.

    1994-12-01

    MHD computations of DC helicity injection in tokamak-like configurations show current drive with no ``loop voltage`` in a resistive, pressureless plasma. The self-consistently generated current profiles are unstable to resistive modes that partially relax the profile through the MHD dynamo mechanism. The current driven by the fluctuations leads to closed contours of average poloidal flux. However, the 1% fluctuation level is large enough to produce a region of stochastic magnetic field. A limited Lundquist number (S) scan from 2.5 {times} 10{sup 3} to 4 {times} 10{sup 4} indicates that both the fluctuation level and relaxation increase with S.

  16. 1000 Independence Avenue, SW, Washington, D.C., Carol G. Crawford, Chair,

    Energy Information Administration (EIA) (indexed site)

    FRIDAY, OCTOBER 25, 2002 The meeting was held at 8:30 in Room 8E-089 of the Department of Energy, 1000 Independence Avenue, SW, Washington, D.C., Carol G. Crawford, Chair, presiding. PRESENT: CAROL G. CRAWFORD, Ph.D. Chair F. JAY BREIDT, Ph.D. Vice Chair MARK BERNSTEIN, Ph.D. JOHNNY BLAIR JAE EDMONDS, Ph.D. JAMES K. HAMMITT, Ph.D. NICHOLAS W. HENGARTNER CALVIN A. KENT, Ph.D. WILLIAM G. MOSS, Ph.D. POLLY A. PHIPPS, Ph.D. RANDY R. SITTER, Ph.D. ROY WHITMORE, Ph.D. ALSO PRESENT: CALVIN A. KENT,

  17. DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers

    DOEpatents

    Fan, N.Q.; Clarke, J.

    1993-10-19

    A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced. 7 figures.

  18. DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers

    DOEpatents

    Fan, Non Q.; Clarke, John

    1993-01-01

    A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced.

  19. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    1999-04-15

    To clarify and modify policies and procedures for management of Department of Energy (DOE) facility contractor employees located in the Washington, D.C., area. A facility contractor employee is any employee of either a contractor responsible for managing a Department-owned facility, such as a National Laboratory, or a subcontractor of such a contractor. Facility contractor means any contractor performing under a Management and Operating (M&O), Management and Integration (M&I), or Environmental Restoration Management Contractor (ERMC) contract awarded by a DOE contracting officer. Canceled by DOE O 350.2.

  20. DOE/EIA-0202(86/1Q) Energy Information Administration Washington, DC

    Gasoline and Diesel Fuel Update

    6/1Q) Energy Information Administration Washington, DC Energy Outlook Quarterly Projections January 1986 Outlook Short-Term _ uergy Outlook Short-Term Ent,. , Energy Outlook Short-Term Energ^ .m Energy Outlook Short-Term Energy L .erm Energy Outlook Short-Term Energy Ou Term Energy Outlook Short-Term Energy Out, t-Term Energy Outlook Short-Term Energy Outlc rt-Term Energy Outlook Short-Term Energy Outloc 3rt-Term Energy Outlook Short-Term Energy Outlocx .ort-Term Energy Outlook Short-Term Energy

  1. DOE/EIA-0202(86/2Q) Energy Information Administration Washington, DC

    Gasoline and Diesel Fuel Update

    2Q) Energy Information Administration Washington, DC Energy Outlook Quarterly Projections April 1986 Outlook Short-Term _ Outlook Short-Term Exit,. . Energy Outlook Short-Term Energ^ .-m Energy Outlook Short-Term Energy L .erm Energy Outlook Short-Term Energy Ou Term Energy Outlook Short-Term Energy OuU t-Term Energy Outlook Short-Term Energy Outlc rt-Term Energy Outlook Short-Term Energy Outloc jrt-Term Energy Outlook Short-Term Energy Outlocx .ort-Term Energy Outlook Short-Term Energy Outlook.

  2. Transparent conducting Al-doped ZnO thin films prepared by magnetron sputtering with dc and rf powers applied in combination

    SciTech Connect

    Minami, Tadatsugu; Ohtani, Yuusuke; Miyata, Toshihiro; Kuboi, Takeshi

    2007-07-15

    A newly developed Al-doped ZnO (AZO) thin-film magnetron-sputtering deposition technique that decreases resistivity, improves resistivity distribution, and produces high-rate depositions has been demonstrated by dc magnetron-sputtering depositions that incorporate rf power (dc+rf-MS), either with or without the introduction of H{sub 2} gas into the deposition chamber. The dc+rf-MS preparations were carried out in a pure Ar or an Ar+H{sub 2} (0%-2%) gas atmosphere at a pressure of 0.4 Pa by adding a rf component (13.56 MHz) to a constant dc power of 80 W. The deposition rate in a dc+rf-MS deposition incorporating a rf power of 150 W was approximately 62 nm/min, an increase from the approximately 35 nm/min observed in dc magnetron sputtering with a dc power of 80 W. A resistivity as low as 3x10{sup -4} {omega} cm and an improved resistivity distribution could be obtained in AZO thin films deposited on substrates at a low temperature of 150 deg. C by dc+rf-MS with the introduction of hydrogen gas with a content of 1.5%. This article describes the effects of adding a rf power component (i.e., dc+rf-MS deposition) as well as introducing H{sub 2} gas into dc magnetron-sputtering preparations of transparent conducting AZO thin films.

  3. INFORMATION: Audit Report on The Office of Secure Transportation DC-9 Aircraft Refurbishment

    SciTech Connect

    2009-05-01

    The National Nuclear Security Administration's (NNSA) Office of Secure Transportation (OST) maintains a fleet of seven aircraft to transport sensitive items, equipment and security personnel. Based on increasing requirements for transporting components and security personnel, OST decided to add a heavy transport aircraft to meet the Department's weapons surety and emergency response missions. In 2004, as a replacement following the sale of a portion of its fleet, OST acquired a DC-9 cargo aircraft that had been excessed by the U.S. military. Prior to integrating the DC-9 into its fleet, NNSA ordered a refurbishment of the aircraft. This refurbishment project was to permit the aircraft to be certified to civil air standards so that it could transport passengers for site visits, training and other travel. The NNSA Service Center (Service Center) awarded a contract for the refurbishment of the aircraft in December 2004. In recent years, the Office of Inspector General has addressed a number of issues relating to the Department's aircraft management activities and services. As part of our ongoing review process and because of the national security importance of its fleet of aircraft, we conducted this review to determine whether OST had an effective and efficient aviation management program.

  4. Simulation Study of an Extended Density DC Glow Toroidal Plasma Source

    SciTech Connect

    Granda-Gutierrez, E. E.; Piedad-Beneitez, A. de la; Lopez-Callejas, R.; Godoy-Cabrera, O. G.; Benitez-Read, J. S.; Pacheco-Sotelo, J. O.; Pena-Eguiluz, R.; Mercado-Cabrera, A.; Valencia A, R.; Barocio, S. R.

    2006-12-04

    Conventional wisdom assigns the DC glow discharge regime to plasma currents below {approx}500 mA values, beyond which the discharge falls into the anomalous glow and the turbulent arc regimes. However, we have found evidence that, during toroidal discharges, this barrier can be ostensibly extended up to 800 mA. Thus, a computer simulation has been applied to the evolution of the main electrical characteristics of such a glow discharge plasma in a toroidal vessel in order to design and construct a respective voltage/current controlled source. This should be able to generate a DC plasma in the glow regime with which currents in the range 10-3-100 A can be experimented and 109-1010 cm-3 plasma densities can be achieved to PIII optimization purposes. The plasma is modelled as a voltage-controlled current source able to be turned on whenever the breakdown voltage is reached across the gap between the anode and the vessel wall. The simulation outcome fits well our experimental measurements showing that the plasma current obeys power laws that are dependent on the power current and other control variables such as the gas pressure.

  5. Simulations for preliminary design of a multi-cathode DC electron gun for eRHIC

    SciTech Connect

    Wu, Q.; Ben-Zvi, I.; Chang, X.; Skaritka, J.

    2010-05-23

    The proposed electron ion collider, eRHIC, requires a large average polarized electron current of 50 mA, which is more than 20 times higher than the present experimental output of a single, highly polarized electron source, based on cesiated super-lattice GaAs. To meet eRHIC's requirement for current, we designed a multicathode DC electron gun for injection. The twenty-four GaAs cathodes emit electrons in sequence, then are combined on axis by a rotating field (or 'funnelled'). In addition to its ultra-high vacuum requirements, the multicathode DC electron gun will place high demand on the electric field symmetry, the magnetic field shielding, and on preventing arcing. In this paper, we discuss our results from a 3D simulation of the latest model for this gun. The findings will guide the actual design in future. Their preliminary design of a multi-cathode electron source for eRHIC demonstrated tolerable fields and reasonable results in both field and particle simulations.

  6. DC-AC Cascaded H-Bridge Multilevel Boost Inverter With No Inductors for Electric/Hybrid Electric Vehicle Applications

    SciTech Connect

    Tolbert, Leon M; Ozpineci, Burak; Du, Zhong; Chiasson, John N

    2009-01-01

    This paper presents a cascaded H-bridge multilevel boost inverter for electric vehicle (EV) and hybrid EV (HEV) applications implemented without the use of inductors. Currently available power inverter systems for HEVs use a dc-dc boost converter to boost the battery voltage for a traditional three-phase inverter. The present HEV traction drive inverters have low power density, are expensive, and have low efficiency because they need a bulky inductor. A cascaded H-bridge multilevel boost inverter design for EV and HEV applications implemented without the use of inductors is proposed in this paper. Traditionally, each H-bridge needs a dc power supply. The proposed design uses a standard three-leg inverter (one leg for each phase) and an H-bridge in series with each inverter leg which uses a capacitor as the dc power source. A fundamental switching scheme is used to do modulation control and to produce a five-level phase voltage. Experiments show that the proposed dc-ac cascaded H-bridge multilevel boost inverter can output a boosted ac voltage without the use of inductors.

  7. Frequency multiplexed flux locked loop architecture providing an array of DC SQUIDS having both shared and unshared components

    DOEpatents

    Ganther, Jr., Kenneth R.; Snapp, Lowell D.

    2002-01-01

    Architecture for frequency multiplexing multiple flux locked loops in a system comprising an array of DC SQUID sensors. The architecture involves dividing the traditional flux locked loop into multiple unshared components and a single shared component which, in operation, form a complete flux locked loop relative to each DC SQUID sensor. Each unshared flux locked loop component operates on a different flux modulation frequency. The architecture of the present invention allows a reduction from 2N to N+1 in the number of connections between the cryogenic DC SQUID sensors and their associated room temperature flux locked loops. Furthermore, the 1.times.N architecture of the present invention can be paralleled to form an M.times.N array architecture without increasing the required number of flux modulation frequencies.

  8. Construction, Qualification, and Low Rate Production Start‐up of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  9. Influence of a transverse magnetic field on arc root movements in a dc plasma torch: Diamagnetic effect of arc column

    SciTech Connect

    Kim, Keun Su

    2009-03-23

    The effect of a transverse magnetic field on the anodic arc root movement inside a dc plasma torch has been investigated. The arc voltage fluctuation, which represents the degree of the arc instability, was reduced to 28.6% of the original value and the high frequency components in the voltage signal also decreased in their magnitudes. The inherent arc instability in a dc thermal plasma torch seems to be suppressed by a diamagnetic effect of the arc column. Furthermore, the measured voltage wave forms indicated that the arc root attachment mode would be controllable by a transverse magnetic field.

  10. Current-voltage characteristics of dc corona discharges in air between coaxial cylinders

    SciTech Connect

    Zheng, Yuesheng; Zhang, Bo He, Jinliang

    2015-02-15

    This paper presents the experimental measurement and numerical analysis of the current-voltage characteristics of dc corona discharges in air between coaxial cylinders. The current-voltage characteristics for both positive and negative corona discharges were measured within a specially designed corona cage. Then the measured results were fitted by different empirical formulae and analyzed by the fluid model. The current-voltage characteristics between coaxial cylinders can be expressed as I = C(U − U{sub 0}){sup m}, where m is within the range 1.5–2.0, which is similar to the point-plane electrode system. The ionization region has no significant effect on the current-voltage characteristic under a low corona current, while it will affect the distribution for the negative corona under a high corona current. The surface onset fields and ion mobilities were emphatically discussed.

  11. High-Density EMI Filter Design for DC-Fed Motor Drives

    SciTech Connect

    Lai, Rixin; Maillet, Yoann; Wang, Shuo; Wang, Fei; Burgos, Rolando; Boroyevich, Dushan

    2010-01-01

    This paper presents strategies to reduce both differential-mode (DM) and common-mode (CM) noise using a passive filter in a dc-fed motor drive. The paper concentrates on the type of grounding and the components to optimize filter size and performance. Grounding schemes, material comparison between ferrite and nanocrystalline cores, and a new integrated filter structure are presented. The integrated structure maximizes the core window area and increases the leakage inductance by integrating both CM and DM inductances onto one core. Small-signal and large-signal experiments validate the structure, showing it to have reduced filter size and good filtering performance when compared with standard filters at both low and high frequencies.

  12. Dynamics of CN+alkane reactions by crossed-beam dc slice imaging

    SciTech Connect

    Huang Cunshun; Li Wen; Estillore, Armando D.; Suits, Arthur G.

    2008-08-21

    The hydrogen atom abstraction reactions of CN (X {sup 2}{sigma}{sup +}) with alkanes have been studied using the crossed molecular beam technique with dc slice ion imaging at collision energies of 7.5 and 10.8 kcal/mol. The product alkyl radical images were obtained via single photon ionization at 157 nm for the reactions of CN (X {sup 2}{sigma}{sup +}) with n-butane, n-pentane, n-hexane, and cyclohexane. From analysis of the images, we obtained the center-of-mass frame product angular distributions and translational energy distributions directly. The results indicate that the products are largely backscattered and that most of the available energy ({approx}80%-85%) goes to the internal energy of the products. The reaction dynamics is discussed in light of recent kinetics data, theoretical calculations, and results for related halogen and oxygen atom reactions.

  13. Volatilization and redox testing in a DC arc melter: FY-93 and FY-94

    SciTech Connect

    Grandy, J.D.; Sears, J.W.; Soelberg, N.R.; Reimann, G.A.; McIlwain, M.E.

    1996-07-01

    The purpose of these experiments was to study the dissolution, retention, volatilization, and trapping of transuranic radionuclide elements (TRUs), mixed fission and activation products, and high vapor pressure metals (HVPMS) during processing in a high temperature arc furnace. In all cases, surrogate elements (lanthanides) were used in place of radioactive ones. The experiments were conducted utilizing a small DC arc melter developed at the Idaho National Engineering Laboratory (INEL) Research Center (IRC). The small arc melter was originally developed in 1992 and has been used previously for waste form studies of iron enriched basalt (IEB) and IEB with zirconium and titanium additions (IEB4). Section 3 contains a description of the small arc melter and its operational capabilities are discussed in Chapter 4. The remainder of the document describes each testing program and then discusses results and findings.

  14. Studies on optoelectronic properties of DC reactive magnetron sputtered chromium doped CdO thin films

    SciTech Connect

    Hymavathi, B. Rao, T. Subba; Kumar, B. Rajesh

    2014-10-15

    Cr doped CdO thin films were deposited on glass substrates by DC reactive magnetron sputtering method and subsequently annealed from 200 °C to 500 °C. X-ray diffraction analysis showed that the films exhibit (1 1 1) preferred orientation. The optical transmittance of the films increases from 64% to 88% with increasing annealing temperature. The optical band gap values were found to be decreased from 2.77 to 2.65 eV with the increase of annealing temperature. The decrease in optical band gap energy with increasing annealing temperature can be attributed to improvement in the crystallinity of the films and may also be due to quantum confinement effect. A minimum resistivity of 2.23 × 10{sup −4} Ω.cm and sheet resistance of 6.3 Ω/sq is obtained for Cr doped CdO film annealed at 500 °C.

  15. Impute DC link (IDCL) cell based power converters and control thereof

    DOEpatents

    Divan, Deepakraj M.; Prasai, Anish; Hernendez, Jorge; Moghe, Rohit; Iyer, Amrit; Kandula, Rajendra Prasad

    2016-04-26

    Power flow controllers based on Imputed DC Link (IDCL) cells are provided. The IDCL cell is a self-contained power electronic building block (PEBB). The IDCL cell may be stacked in series and parallel to achieve power flow control at higher voltage and current levels. Each IDCL cell may comprise a gate drive, a voltage sharing module, and a thermal management component in order to facilitate easy integration of the cell into a variety of applications. By providing direct AC conversion, the IDCL cell based AC/AC converters reduce device count, eliminate the use of electrolytic capacitors that have life and reliability issues, and improve system efficiency compared with similarly rated back-to-back inverter system.

  16. Experimental results from a DC photocathode electron gun for an IR FEL

    SciTech Connect

    Kehne, D.; Engwall, D.; Legg, R.; Shinn, M.

    1997-10-01

    A 350 keV DC photocathode gun capable of delivering the high-brightness CW electron beam necessary for Jefferson Lab`s infrared free-electron laser is described. The gun is to be used with a superconducting radiofrequency linac operating at 1.497 GHz and is mode-locked to the 40th subharmonic of the fundamental using a Nd:YLF drive laser. The gun provides 20--25 ps bunches at up to 135 pC/bunch. Experimental measurements of transverse and longitudinal beam properties are presented. Transverse emittance is measured using a slit-wire scanner emittance meter, and energy spread is measured using the slit and a spectrometer magnet. Longitudinal emittance is measured using a combination of sampling aperture, kicker cavity, slit and spectrometer. Measurements for bunch charges of 135 pC are described and compared with simulations.

  17. Point of collapse and continuation methods for large ac/dc systems

    SciTech Connect

    Canizares, C.A. ); Alvarado, F.L. )

    1993-02-01

    This paper describes the implementation of both Point of Collapse (PoC) methods and continuation methods for the computation of voltage collapse points (saddle-node bifurcations) in large ac/dc systems. A comparison of the performance of these methods is presented for real systems of up to 2,158 buses. The paper discusses computational details of the implementation of the PoC and continuation methods, and the unique challenges encountered due to the presence of high voltage direct current (HVDC) transmission, area interchange power control regulating transformers, and voltage and reactive power limits. The characteristics of a robust PoC power flow program are presented, and its application to detection and solution of voltage stability problems is demonstrated.

  18. Design of DC-contact RF MEMS switch with temperature stability

    SciTech Connect

    Sun, Junfeng; Li, Zhiqun; Zhu, Jian; Yu, Yuanwei; Jiang, Lili

    2015-04-15

    In order to improve the temperature stability of DC-contact RF MEMS switch, a thermal buckle-beam structure is implemented. The stability of the switch pull-in voltage versus temperature is not only improved, but also the impact of stress and stress gradient on the drive voltage is suppressed. Test results show that the switch pull-in voltage is less sensitive to temperature between -20 °C and 100 °C. The variable rate of pull-in voltage to temperature is about -120 mV/°C. The RF performance of the switch is stable, and the isolation is almost independent of temperature. After being annealed at 280 °C for 12 hours, our switch samples, which are suitable for packaging, have less than 1.5% change in the rate of pull-in voltage.

  19. Meeting Summary Advanced Light Water Reactor Fuels Industry Meeting Washington DC October 27 - 28, 2011

    SciTech Connect

    Not Listed

    2011-11-01

    The Advanced LWR Fuel Working Group first met in November of 2010 with the objective of looking 20 years ahead to the role that advanced fuels could play in improving light water reactor technology, such as waste reduction and economics. When the group met again in March 2011, the Fukushima incident was still unfolding. After the March meeting, the focus of the program changed to determining what we could do in the near term to improve fuel accident tolerance. Any discussion of fuels with enhanced accident tolerance will likely need to consider an advanced light water reactor with enhanced accident tolerance, along with the fuel. The Advanced LWR Fuel Working Group met in Washington D.C. on October 72-18, 2011 to continue discussions on this important topic.

  20. Term Assignments of Contractors to the Washington D.C. Area.

    Office of Energy Efficiency and Renewable Energy (EERE)

    On July 2, 2013 the DOE Office of the Inspector General issued Audit Report Number 0890 entitled, "Follow-up Audit on Term Assignments of Contractor Employees." The audit was conducted as a follow-up of the FY 2005 audit of "Management of Facility Contractors Assigned to the Washington D.C. area DOE/IG 0710." The earlier report found instances where assignment justifications were insufficient, costs appeared excessive and allowances inconsistent. The follow-up audit recognized improved management of assignments but noted assignment justifications and cost management could be improved. The report recommended DOE determine prior year actual costs to assist in calculating the estimated costs for the upcoming year of multi-year assignments and ensure assignment records in the Departmental Management and Tracking System (DMATS) are accurate.

  1. Crossed-beam DC slice imaging of fluorine atom reactions with linear alkanes

    SciTech Connect

    Shi, Yuanyuan; Kamasah, Alexander; Joalland, Baptiste; Suits, Arthur G.

    2015-05-14

    We report the reaction dynamics of F atom with selected alkanes studied by crossed beam scattering with DC slice ion imaging. The target alkanes are propane, n-butane, and n-pentane. The product alkyl radicals are probed by 157 nm single photon ionization following reaction at a collision energy of ∼10 kcal mol{sup −1}. The analyzed data are compared with the corresponding theoretical studies. Reduced translational energy distributions for each system show similar trends with little of the reaction exoergicity appearing in translation. However, the pentane reaction shows a somewhat smaller fraction of available energy in translation than the other two, suggesting greater energy channeled into pentyl internal degrees of freedom. The center-of-mass angular distributions all show backscattering as well as sharp forward scattering that decreases in relative intensity with the size of the molecule. Possible reasons for these trends are discussed.

  2. Control method for peak power delivery with limited DC-bus voltage

    DOEpatents

    Edwards, John; Xu, Longya; Bhargava, Brij B.

    2006-09-05

    A method for driving a neutral point-clamped multi-level voltage source inverter supplying a synchronous motor is provided. A DC current is received at a neutral point-clamped multi-level voltage source inverter. The inverter has first, second, and third output nodes. The inverter also has a plurality of switches. A desired speed of a synchronous motor connected to the inverter by the first second and third nodes is received by the inverter. The synchronous motor has a rotor and the speed of the motor is defined by the rotational rate of the rotor. A position of the rotor is sensed, current flowing to the motor out of at least two of the first, second, and third output nodes is sensed, and predetermined switches are automatically activated by the inverter responsive to the sensed rotor position, the sensed current, and the desired speed.

  3. Analysis of Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias

    SciTech Connect

    Suzer, Sefik; Baer, Donald R.; Engelhard, Mark H.

    2010-06-16

    The impact of solution exposure on the charging properties of oxide coatings on Fe metal-core oxide-shells has been examined by sample biasing during XPS measurements. The Fe nanoparticles were suspended in relatively unreactive acetone and were analyzed after particle containing solutions were deposited on SiO2/Si substrates, and/or Au substrates. The particle and substrate combinations were subjected to 10V d.c. biasing in the form of square waves (SQW) pulses with 5V amplitude. The samples experienced variable degrees of charging for which low energy electrons at ~1 eV, 20?A and low energy Ar+ ions were used to minimize. Application of d.c. bias and/or square wave pulses drastically influences the extent of charging, which is utilized to gather additional analytical information about the sample under investigation. This approach allows separation of otherwise overlapping peaks. Accordingly, the O1s peaks of the silicon oxide substrate, the iron oxide nanoparticles, and that of the casting solvent can be separated from each other. Similarly the C1s peak belonging to the solvent can be separated from that of the adventitious carbon. The charging shifts of the iron nanoparticles are strongly influenced by the surrounding solvent. Hence, acetone exhibits the largest shift, water the smallest, and methanol in between. Dynamical measurements performed by application of the voltage stress in the form of SQW pulses gives information about the time constants of the processes involved, which led us postulate that these charging properties we probe in these systems, stem mainly from ionic movement(s).

  4. DOE Advanced Controls R&D Planning Workshop, June 11, 2003, Washington DC: Workshop Results

    SciTech Connect

    Brambley, Michael R.; Haves, Philip; McDonald, Sean C.; Torcellini, Paul; Hansen, David G.; Holmberg, David; Roth, Kurt

    2005-04-13

    On June 11, 2003, representatives from universities, federal and state government agencies, Department of Energy national laboratories, and the private sector attended a one-day workshop in Washington, DC. The objective of the workshop was to review and provide input into DOE's assessment of the market for advanced sensors and controls technology and potential R&D pathways to enhance their success in the buildings market place. The workshop consisted of two sessions. During the morning session, participants were given an overview on the following topics: market assessment, current applications and strategies for new applications, sensors and controls, networking, security, and protocols and standards, and automated diagnostics, performance measurement, commissioning and optimal control and tools. In the sessions, workshop participants were asked to review the potential R&D pathways, identify high priority activities, and outline a five year path for each of these activities. Priorities were as follows: largest and quickest impact; best use of finite resources; greatest likelihood for market penetration; and ability to replicate results. The participants identified several promising R&D opportunities.

  5. Certification review of the DC-1 packaging for transport of HEU oxide

    SciTech Connect

    Primeau, S.J.; Thomas, G.R.

    1995-11-01

    The DC-1, a packaging for the transport of up to 19.7 kg of high-enriched uranium oxide, has been submitted for Department of Energy (DOE) Headquarters certification. The technical review for regulatory compliance is discussed from the reviewer`s standpoint, with emphasis on three notable aspects of the packaging design: (1) The packaging is the first submitted for DOE certification under the provisions of 10 CFR 71.55(c). (2) The containment vessels were fabricated in accordance with Section 8 of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code; however, additional inspection requirements were imposed at the time of fabrication. Compliance with the requirements of Section 3 of the ASME Code is discussed. (3) A temporary adapter plate is installed between the lid and body of each containment vessel to facilitate periodic leak testing of the containment boundaries. This procedure is compared against the recommendations in the American National Standards Institute (ANSI) N14.5 Standard.

  6. Method for manufacturing compound semiconductor field-effect transistors with improved DC and high frequency performance

    DOEpatents

    Zolper, John C.; Sherwin, Marc E.; Baca, Albert G.

    2000-01-01

    A method for making compound semiconductor devices including the use of a p-type dopant is disclosed wherein the dopant is co-implanted with an n-type donor species at the time the n-channel is formed and a single anneal at moderate temperature is then performed. Also disclosed are devices manufactured using the method. In the preferred embodiment n-MESFETs and other similar field effect transistor devices are manufactured using C ions co-implanted with Si atoms in GaAs to form an n-channel. C exhibits a unique characteristic in the context of the invention in that it exhibits a low activation efficiency (typically, 50% or less) as a p-type dopant, and consequently, it acts to sharpen the Si n-channel by compensating Si donors in the region of the Si-channel tail, but does not contribute substantially to the acceptor concentration in the buried p region. As a result, the invention provides for improved field effect semiconductor and related devices with enhancement of both DC and high-frequency performance.

  7. Improving the dynamic performance of a complex AC/DC system by HVDC control modifications

    SciTech Connect

    Hammad, A.E. ); Gagnon, J. ); McCallum, D. )

    1990-10-01

    The power system of Hydro-Quebec has a peak load of approximately 27 GW. The great distance between the production sites and the load centers introduces stability limitations, which is the reason why the Quebec grid cannot be economically synchronized (through ac transmission with limited capacity) with the U.S. northeastern network. Power exports are therefore dependent on the use of HVDC links of which Hydro-Quebec now possesses five, for a capacity of over 2600 MW. Such a capacity will again soon increase. At the moment, the Chateauguay scheme has the largest HVDC capacity. It transfers 1000 MW by means of two Back-to-Back converter blocks. Various automatic control systems are installed on the Chateauguay scheme owing to the fact that a single circuit of a 765 kV ac line transmits the output of both the HVDC converter stations as well as the output from Beauharnois hydro generating station. Such controls have performed satisfactorily since 1984. However, a remarkable improvement of the overall ac/dc system dynamic performance can be gained by making certain modifications in some of these HVDC system controls. This paper presents the salient features of such control modifications, currently under consideration, using the results of an investigation by digital and analogue simulations that demonstrate the achieved improvements.

  8. Characterization of the CEBAF 100 kV DC GaAs Photoelectron Gun Vacuum System

    SciTech Connect

    M.L. Stutzman; P. Adderley; J. Brittian; J. Clark; J. Grames; J. Hansknecht; G.R. Myneni; M. Poelker

    2007-05-01

    A vacuum system with pressure in the low ultra-high vacuum (UHV) range is essential for long photocathode lifetimes in DC high voltage GaAs photoguns. A discrepancy between predicted and measured base pressure in the CEBAF photoguns motivated this study of outgassing rates of three 304 stainless steel chambers with different pretreatments and pump speed measurements of non-evaporable getter (NEG) pumps. Outgassing rates were measured using two independent techniques. Lower outgassing rates were achieved by electropolishing and vacuum firing the chamber. The second part of the paper describes NEG pump speed measurements as a function of pressure through the lower part of the UHV range. Measured NEG pump speed is high at pressures above 510^?11 Torr, but may decrease at lower pressures depending on the interpretation of the data. The final section investigates the pump speed of a locally produced NEG coating applied to the vacuum chamber walls. These studies represent the first detailed vacuum measurements of CEBAF photogun vacuum chambers.

  9. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOEpatents

    Bertuccio, Giuseppe; Rehak, Pavel; Xi, Deming

    1994-09-13

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier.

  10. Structural and optical properties of DC reactive magnetron sputtered zinc aluminum oxide thin films

    SciTech Connect

    Kumar, B. Rajesh; Rao, T. Subba

    2014-10-15

    Highly transparent conductive Zinc Aluminum Oxide (ZAO) thin films have been deposited on glass substrates using DC reactive magnetron sputtering method. The thin films were deposited at 200 C and post-deposition annealing from 15 to 90 min. XRD patterns of ZAO films exhibit only (0 0 2) diffraction peak, indicating that they have c-axis preferred orientation perpendicular to the substrate. Scanning electron microscopy (SEM) is used to study the surface morphology of the films. The grain size obtained from SEM images of ZAO thin films are found to be in the range of 20 - 26 nm. The minimum resistivity of 1.74 10{sup ?4} ? cm and an average transmittance of 92% are obtained for the thin film post annealed for 30 min. The optical band gap of ZAO thin films increased from 3.49 to 3.60 eV with the increase of annealing time due to Burstein-Moss effect. The optical constants refractive index (n) and extinction coefficient (k) were also determined from the optical transmission spectra.

  11. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOEpatents

    Bertuccio, G.; Rehak, P.; Xi, D.

    1994-09-13

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier. 6 figs.

  12. Fabrication of layered self-standing diamond film by dc arc plasma jet chemical vapor deposition

    SciTech Connect

    Chen, G. C.; Dai, F. W.; Li, B.; Lan, H.; Askari, J.; Tang, W. Z.; Lu, F. X.

    2007-01-15

    Layered self-standing diamond films, consisting of an upper layer, buffer layer, and a lower layer, were fabricated by fluctuating the ratio of methane to hydrogen in high power dc arc plasma jet chemical vapor deposition. There were micrometer-sized columnar diamond crystalline grains in both upper layer and lower layer. The size of the columnar diamond crystalline grains was bigger in the upper layer than that in the lower layer. The orientation of the upper layer was (110), while it was (111) for the lower layer. Raman results showed that no sp{sup 3} peak shift was found in the upper layer, but it was found and blueshifted in the lower layer. This indicated that the internal stress within the film body could be tailored by this layered structure. The buffer layer with nanometer-sized diamond grains formed by secondary nucleation was necessary in order to form the layered film. Growth rate was over 10 {mu}m/h in layered self-standing diamond film fabrication.

  13. Measurement of gas temperature and convection velocity profiles in a dc atmospheric glow discharge

    SciTech Connect

    Stepaniuk, Vadim P.; Ioppolo, Tindaro; Oetuegen, M. Volkan; Sheverev, Valery A.

    2007-12-15

    Gas temperature and convective velocity distributions are presented for an unconfined glow discharge in air at atmospheric pressure, with electric currents ranging between 30 and 92 mA. The vertically oriented discharge was formed between a pin anode (top) and an extended cathode. The temperature and velocity profiles were measured using laser-induced Rayleigh scattering and laser Doppler anemometry techniques, respectively. The temperature field exhibited a conical shape with the radius of hot temperature zone increasing toward the anode. A maximum temperature of 2470 K was observed on the discharge axis with the discharge current of 92 mA. Air velocity measurements around the discharge demonstrated that the shape and magnitude of the temperature field are strongly affected by natural convection. Estimates indicate that convective losses may account for more than 50% of the power input into the positive column of the discharge. The measured temperature fields and convective velocity profiles provide a set of data that is important for the evaluation of dc atmospheric glow discharges in various applications such as sound manipulation and acoustic noise mitigation.

  14. Analysis of dc harmonics using the three-pulse model for the intermountain power project HVDC transmission

    SciTech Connect

    Dickmander, D.L.; Peterson, K.J.

    1989-04-01

    The harmonic analysis of the dc-side of an HVDC line transmission requires realistic models of the converters, the dc line, and other relevant equipment. These models must include all important paths for harmonic current, and appropriate sources of harmonic voltage generation. The classical converter modeling technique has been demonstrated to be insufficient in field measurements and analysis of the harmonic spectra found on recent HVDC line transmission. For this reason, a new model of the converter bridge which takes into account the major stray capacitances in the converter (the three-pulse model) has been developed, and is described in detail elsewhere. This paper presents comparisons between the classical and three-pulse calculations for the Intermountain Power Project (IPP) HVDC transmission. The calculation results from the three-pulse model agree favorably with the harmonics found in field measurements.

  15. Applications of exact linearization techniques for steady-state stability enhancement in a weak ac/dc system

    SciTech Connect

    Kaprielian, S.; Clements, K. ); Turi, J. )

    1992-05-01

    A nonlinear control strategy to improve the steady-state stability of a weak AC/DC power system is presented. The approach described in this paper is based on the extension of feedback linearization techniques to nonlinear descriptor system models. This method produces a nonlinear control strategy which is capable of enhancing system performance for various system operating conditions. This claim is supported with simulation results.

  16. Comparison of the complete genome sequences of Pseudomonassyringae pv. syringae B728a and pv. tomato DC3000.

    SciTech Connect

    Feil, Helene; Feil, William S.; Chain, Patrick; Larimer, Frank; DiBartolo, Genevieve; Copeland, Alex; Lykidis, Athanasios; Trong,Stephen; Nolan, Matt; Goltsman, Eugene; Thiel, James; Malfatti,Stephanie; Loper, Joyce E.; Lapidus, Alla; Detter, John C.; Land, Miriam; Richardson, Paul M.; Kyrpides, Nikos C.; Ivanova, Natalia; Lindow, StevenE.

    2005-04-01

    The complete genomic sequence of Pseudomonas syringaepathovar syringae B728a (Pss B728a), has been determined and is comparedwith that of Pseudomonas syringae pv. tomato DC3000 (Pst DC3000). Thesetwo pathovars of this economically important species of plant pathogenicbacteria differ in host range and apparent patterns of interaction withplants, with Pss having a more pronounced epiphytic stage of growth andhigher abiotic stress tolerance and Pst DC3000 having a more pronouncedapoplastic growth habitat. The Pss B728a genome (6.1 megabases) containsa circular chromosome and no plasmid, whereas the Pst DC3000 genome is6.5 mbp in size, composed of a circular chromosome and two plasmids.While a high degree of similarity exists between the two sequencedPseudomonads, 976 protein-encoding genes are unique to Pss B728a whencompared to Pst DC3000, including large genomic islands likely tocontribute to virulence and host specificity. Over 375 repetitiveextragenic palindromic sequences (REPs) unique to Pss B728a when comparedto Pst DC3000 are widely distributed throughout the chromosome except in14 genomic islands, which generally had lower GC content than the genomeas a whole. Content of the genomic islands vary, with one containing aprophage and another the plasmid pKLC102 of P. aeruginosa PAO1. Among the976 genes of Pss B728a with no counterpart in Pst DC3000 are thoseencoding for syringopeptin (SP), syringomycin (SR), indole acetic acidbiosynthesis, arginine degradation, and production of ice nuclei. Thegenomic comparison suggests that several unique genes for Pss B728a suchas ectoine synthase, DNA repair, and antibiotic production may contributeto epiphytic fitness and stress tolerance of this organism. Pseudomonassyringae, a member of the gamma subgroup of the Proteobacteria, is awidespread bacterial pathogen of many plant species. The species P.syringae is subdivided into approximately 50 pathovars based onpathogenicity and host range. P. syringae is capable of

  17. Modeling and simulation, and their validation of three-phase transformers with three legs under DC bias

    SciTech Connect

    Fuchs, E.F.; You, Y.; Roesler, D.J.

    1999-04-01

    This paper proposes a new model for three-phase transformers with three legs with and without tank under DC bias based on electric and magnetic circuit theory. For the calculation of the nonsinusoidal no-load currents, a combination of time and frequency domains is used. The analysis shows that (1) asymmetric three-phase transformers with three legs generate magnetizing currents with triplen harmonics not being of the zero-sequence type. (2) The wave shapes of the three magnetizing currents of (asymmetric) transformers are dependent on the phase sequence. (3) The magnetic history of transformer magnetization -- due to residual magnetization and hysteresis of the tank -- cannot be ignored if a DC bias is present and the magnetic influence of the tank is relatively strong, e.g., for oil-cooled transformers. (4) Symmetric three-phase transformers with three legs generate no-load currents without triplen harmonics. (5) The effects of DC bias currents (e.g., reactive power demand, harmonic distortion) can be suppressed employing symmetric three-phase transformers with three legs including tank. Measurements corroborate computational results; thus this nonlinear model is valid and accurate.

  18. Charge and fluence lifetime measurements of a dc high voltage GaAs photogun at high average current

    SciTech Connect

    J. Grames, R. Suleiman, P.A. Adderley, J. Clark, J. Hansknecht, D. Machie, M. Poelker, M.L. Stutzman

    2011-04-01

    GaAs-based dc high voltage photoguns used at accelerators with extensive user programs must exhibit long photocathode operating lifetime. Achieving this goal represents a significant challenge for proposed high average current facilities that must operate at tens of milliamperes or more. This paper describes techniques to maintain good vacuum while delivering beam, and techniques that minimize the ill effects of ion bombardment, the dominant mechanism that reduces photocathode yield of a GaAs-based dc high voltage photogun. Experimental results presented here demonstrate enhanced lifetime at high beam currents by: (a) operating with the drive laser beam positioned away from the electrostatic center of the photocathode, (b) limiting the photocathode active area to eliminate photoemission from regions of the photocathode that do not support efficient beam delivery, (c) using a large drive laser beam to distribute ion damage over a larger area, and (d) by applying a relatively low bias voltage to the anode to repel ions created within the downstream beam line. A combination of these techniques provided the best total charge extracted lifetimes in excess of 1000 C at dc beam currents up to 9.5 mA, using green light illumination of bulk GaAs inside a 100 kV photogun.

  19. TiN coated aluminum electrodes for DC high voltage electron guns

    DOE PAGES [OSTI]

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-01

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloymore » (Ti-6AI-4V). Following gas conditioning, each TiN-coated aluminum electrode reached -225 kV bias voltage while generating less than 100 pA of field emission (<10 pA) using a 40 mm cathode/anode gap, corresponding to field strength of 13.7 MV/m. Smaller gaps were studied to evaluate electrode performance at higher field strength with the best performing TiN-coated aluminum electrode reaching ~22.5 MV/m with field emission less than 100 pA. These results were comparable to those obtained from our best-performing electrodes manufactured from stainless steel, titanium alloy and niobium, as reported in references cited below. The TiN coating provided a very smooth surface and with mechanical properties of the coating (hardness and modulus) superior to those of stainless steel, titanium-alloy, and niobium electrodes. These features likely contributed to the improved high voltage performance of the TiN-coated aluminum electrodes.« less

  20. TiN coated aluminum electrodes for DC high voltage electron guns

    SciTech Connect

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-01

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloy (Ti-6AI-4V). Following gas conditioning, each TiN-coated aluminum electrode reached -225 kV bias voltage while generating less than 100 pA of field emission (<10 pA) using a 40 mm cathode/anode gap, corresponding to field strength of 13.7 MV/m. Smaller gaps were studied to evaluate electrode performance at higher field strength with the best performing TiN-coated aluminum electrode reaching ~22.5 MV/m with field emission less than 100 pA. These results were comparable to those obtained from our best-performing electrodes manufactured from stainless steel, titanium alloy and niobium, as reported in references cited below. The TiN coating provided a very smooth surface and with mechanical properties of the coating (hardness and modulus) superior to those of stainless steel, titanium-alloy, and niobium electrodes. These features likely contributed to the improved high voltage performance of the TiN-coated aluminum electrodes.

  1. TiN coated aluminum electrodes for DC high voltage electron guns

    SciTech Connect

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-15

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloy (Ti-6Al-4V). Following gas conditioning, each TiN-coated aluminum electrode reached −225 kV bias voltage while generating less than 100 pA of field emission (<10 pA) using a 40 mm cathode/anode gap, corresponding to field strength of 13.7 MV/m. Smaller gaps were studied to evaluate electrode performance at higher field strength with the best performing TiN-coated aluminum electrode reaching ∼22.5 MV/m with field emission less than 100 pA. These results were comparable to those obtained from our best-performing electrodes manufactured from stainless steel, titanium alloy and niobium, as reported in references cited below. The TiN coating provided a very smooth surface and with mechanical properties of the coating (hardness and modulus) superior to those of stainless steel, titanium-alloy, and niobium electrodes. These features likely contributed to the improved high voltage performance of the TiN-coated aluminum electrodes.

  2. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    SciTech Connect

    BastaniNejad, Mahzad; Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-01

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (~nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>μA) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolished by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.

  3. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    SciTech Connect

    BastaniNejad, Mahzad Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-15

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (∼nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>μA) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolished by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The authors speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.

  4. Operation of a test bed axial-gap brushless dc rotor with a superconducting stator

    SciTech Connect

    McKeever, J.W.; Sohns, C.W.; Schwenterly, S.W.; Young, R.W. Sr.; Campbell, V.W.; Hickey, M.H.; Ott, G.W.; Bailey, J.M.

    1993-08-01

    A variable-speed axial-gap motor with a stator consisting of four liquid helium cooled superconducting electromagnets (two pole pairs) was built and proof tested up to 608 rpm in November 1990 as a tool for joint industry-laboratory evaluation of coils fabricated from high-temperature oxide superconductors. A second rotor was fabricated with improved materia winding configuration, and wire type, and the drive system was modified to eliminate current spiking. The modified motor was characterized to design speed, 188 rad/s (1800 rpm), to acquire a performance baseline for future comparison with that of high-temperature superconducting (HIS) wire. As it becomes commercially available, HTS wire will replace the low-temperature electromagnet wire in a stator modified to control wire temperatures between 4 K and 77 K. Measurements of the superconducting electromagnetic field and locked rotor torque as functions of cryocurrent and dc current through two phases of the rotor, respectively, provided data to estimate power that could be developed by the rotor. Back emf and parasitic mechanical and electromagnetic drag torques were measured as functions of angular velocity to calculate actual rotor power developed and to quantify losses, which reduce the motor`s efficiency. A detailed measurement of motor power at design speed confirmed the developed power equation. When subsequently operated at the 33-A maximum available rotor current, the motor delivered 15.3 kill (20.5 hp) to the load. In a final test, the cryostat was operated at 2500 A, 200 A below its critical current. At rotor design current of 60 A and 2500 A stator current, the extrapolated developed power would be 44.2 kill (59.2 hp) with 94% efficiency.

  5. An experimental and theoretical investigation of a magnetically confined dc plasma discharge

    SciTech Connect

    Rondanini, Maurizio; Cavallotti, Carlo; Ricci, Daria; Chrastina, Daniel; Isella, Giovanni; Moiseev, Tamara; Kaenel, Hans von

    2008-07-01

    A magnetically confined dc plasma discharge sustained by a thermionic source was investigated using a combined experimental and theoretical approach. The discharge originates in an arc plasma source and is expanded in a cylindrical chamber, where it is stabilized by an annular anode. The plasma expansion is contained by an axial magnetic field generated by coils positioned at the top and the bottom of the reactor. The plasma reactor design allows control of the energy of ions impinging on the substrate and thus a high electron density of about 10{sup 17} m{sup -3} at 1 Pa can be reached. The plasma is studied using a model composed of the Poisson and of the charged species continuity equations, solved in the flow and temperature fields determined by solving the Navier-Stokes and Fourier equations. The model equations are integrated using the finite element method in a two-dimensional axial symmetric domain. Ionization rates are either assumed constant or determined by solving the Boltzmann transport equation in the local electric field with the Monte Carlo (MC) method. Electron and ion transport parameters are determined by accounting for magnetic confinement through a simplified solution of the ion and electron momentum conservation equations, which yielded parameters in good agreement with those determined with the MC simulations. Calculated electron densities and plasma potentials were satisfactorily compared to those measured using a Langmuir probe. The model demonstrates that the intensity of the magnetic field greatly influences the electron density, so that a decrease by a factor of 2 in its intensity corresponds to a decrease by almost an order of magnitude of the electron and ion concentrations.

  6. Electronic current transducer (ECT) for high-voltage dc lines. Final report

    SciTech Connect

    Houston, J.M.; Peters, P.H. Jr.; Summerhayes, H.R. Jr.; Carlson, G.J.; Itani, A.M.

    1980-02-01

    The development of a bipolar electronic current transducer (ECT) for measuring the current in a high-voltage dc (HVDC) power line at line potential is reported. The design and construction of a free-standing ECT for use on a 400-kV line having a nominal line current of 2000 A (1 pu) is described. Line current is measured by a 0.0001-..cap omega.. shunt whose voltage output is sampled by a 14-bit digital data link. The high-voltage interface between line and ground is traversed by optical fibers which carry digital light signals as far as 300 m to a control room where the digital signal is converted back to an analog representation of the shunt voltage. Two redundant electronic and optical data links are used in the prototype. Power to operate digital and optical electronics and temperature-controlling heaters at the line is supplied by a resistively and capacitively graded 10-stage cascade of ferrite-core transformers located inside the hollow, SF/sub 6/-filled, porcelain support insulator. The cascade is driven by an SCR (silicon-controlled-rectifier) inverter which supplies about 100 W of power at 30 kHz. Specification goals called for operation over the temperature range -40 to +50/sup 0/C to an output accuracy of +-0.6% at 0.1 pu and +-0.3% between 0.3 pu and 1.0 pu. A frequency response greater than 370 Hz and a step response time of less than 2 ms was desired. Initial tests indicate that these goals have been met in the prototype structure. The unit is now installed and being evaluated at the Sylmar converter station of the HVDC Pacific Intertie in California.

  7. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    DOE PAGES [OSTI]

    BastaniNejad, Mahzad; Elmustafa, Abdelmageed A.; Forman, Eric; Covert, Steven; Hansknecht, John; Hernandez-Garcia, Carlos; Poelker, Matthew; Das, Lopa; Kelley, Michael; Williams, Phillip

    2015-07-01

    DC high voltage photoelectron guns are used to produce polarized electron beams for accelerator-based nuclear and high-energy physics research. Low-level field emission (~nA) from the cathode electrode degrades the vacuum within the photogun and reduces the photoelectron yield of the delicate GaAs-based photocathode used to produce the electron beams. High-level field emission (>μA) can cause significant damage the photogun. To minimize field emission, stainless steel electrodes are typically diamond-paste polished, a labor-intensive process often yielding field emission performance with a high degree of variability, sample to sample. As an alternative approach and as comparative study, the performance of electrodes electropolishedmore » by conventional commercially available methods is presented. Our observations indicate the electropolished electrodes exhibited less field emission upon the initial application of high voltage, but showed less improvement with gas conditioning compared to the diamond-paste polished electrodes. In contrast, the diamond-paste polished electrodes responded favorably to gas conditioning, and ultimately reached higher voltages and field strengths without field emission, compared to electrodes that were only electropolished. The best performing electrode was one that was both diamond-paste polished and electropolished, reaching a field strength of 18.7 MV/m while generating less than 100 pA of field emission. The speculate that the combined processes were the most effective at reducing both large and small scale topography. However, surface science evaluation indicates topography cannot be the only relevant parameter when it comes to predicting field emission performance.« less

  8. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2003-10-29

    To establish policies and procedures for management of DOE, including NNSA, Management and Operating (M&O) and other facility management contractor employees assigned to the Washington, D.C., area. Cancels DOE O 350.2.

  9. Data:E27214d6-18ee-410f-87b6-ecf189dc6f07 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    ecf189dc6f07 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  10. Data:6941e69c-3b58-4100-9f8a-95b61dc551f9 | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    dc551f9 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  11. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2015-05-18

    The Order establishes policies and procedures for managing DOE and NNSA management and operating (M&O) contractors and other facility management contractor employees assigned to the Washington, D.C., area.

  12. Development of a New Class of Low Cost, High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC)

    SciTech Connect

    Prasad Enjeti; J.W. Howze

    2003-12-01

    This project proposes to design and develop a new class of power converters (direct DC to AC) to drastically improve performance and optimize the cost, size, weight and volume of the DC to AC converter in SOFC systems. The proposed topologies employ a high frequency link; direct DC to AC conversion approach. The direct DC to AC conversion approach is more efficient and operates without an intermediate dc-link stage. The absence of the dc-link, results in the elimination of bulky, aluminum electrolytic capacitors, which in turn leads to a reduction in the cost, volume, size and weight of the power electronic converter. The feasibility of two direct DC to AC converter topologies and their suitability to meet SECA objectives will be investigated. Laboratory proto-type converters (3-5kW) will be designed and tested in Phase-1. A detailed design trade-off study along with the test results will be available in the form of a report for the evaluation of SECA Industrial partners. This project proposes to develop a new and innovative power converter technology suitable for Solid Oxide Fuel Cell (SOFC) power systems in accordance with SECA objectives. The proposed fuel cell inverter (FCI) employs state of the art power electronic devices configured in two unique topologies to achieve direct conversion of DC power (24-48V) available from a SOFC to AC power (120/240V, 60Hz) suitable for utility interface and powering stand alone loads. The primary objective is to realize cost effective fuel cell converter, which operates under a wide input voltage range, and output load swings with high efficiency and improved reliability.

  13. Scaling of economic benefits from Green Roof implementation in Washington, DC.

    SciTech Connect

    Niu, H.; Clark, C. E.; Zhou, J.; Adriaens, P.; Environmental Science Division; Dalian Univ. of Technology; Univ. of Michigan

    2010-06-01

    Green roof technology is recognized for mitigating stormwater runoff and energy consumption. Methods to overcome the cost gap between green roofs and conventional roofs were recently quantified by incorporating air quality benefits. This study investigates the impact of scaling on these benefits at the city-wide scale using Washington, DC as a test bed because of the proposed targets in the 20-20-20 vision (20 million ft{sup 2} by 2020) articulated by Casey Trees, a nonprofit organization. Building-specific stormwater benefits were analyzed assuming two proposed policy scenarios for stormwater fees ranging from 35 to 50% reduction for green roof implementation. Heat flux calculations were used to estimate building-specific energy savings for commercial buildings. To assess benefits at the city scale, stormwater infrastructure savings were based on operational savings and size reduction due to reduced stormwater volume generation. Scaled energy infrastructure benefits were calculated using two size reductions methods for air conditioners. Avoided carbon dioxide, nitrogen oxide (NOx), and sulfur dioxide emissions were based on reductions in electricity and natural gas consumption. Lastly, experimental and fugacity-based estimates were used to quantify the NOx uptake by green roofs, which was translated to health benefits using U.S. Environmental Protection Agency models. The results of the net present value (NPV) analysis showed that stormwater infrastructure benefits totaled $1.04 million (M), while fee-based stormwater benefits were $0.22-0.32 M/y. Energy savings were $0.87 M/y, while air conditioner resizing benefits were estimated at $0.02 to $0.04 M/y and avoided emissions benefits (based on current emission trading values) were $0.09 M-0.41 M/y. Over the lifetime of the green roof (40 years), the NPV is about 30-40% less than that of conventional roofs (not including green roof maintenance costs). These considerable benefits, in concert with current and

  14. Brushed permanent magnet DC MLC motor operation in an external magnetic field

    SciTech Connect

    Yun, J.; St Aubin, J.; Rathee, S.; Fallone, B. G.

    2010-05-15

    Purpose: Linac-MR systems for real-time image-guided radiotherapy will utilize the multileaf collimators (MLCs) to perform conformal radiotherapy and tumor tracking. The MLCs would be exposed to the external fringe magnetic fields of the linac-MR hybrid systems. Therefore, an experimental investigation of the effect of an external magnetic field on the brushed permanent magnet DC motors used in some MLC systems was performed. Methods: The changes in motor speed and current were measured for varying external magnetic field strengths up to 2000 G generated by an EEV electromagnet. These changes in motor characteristics were measured for three orientations of the motor in the external magnetic field, mimicking changes in motor orientations due to installation and/or collimator rotations. In addition, the functionality of the associated magnetic motor encoder was tested. The tested motors are used with the Varian 120 leaf Millennium MLC (Maxon Motor half leaf and full leaf motors) and the Varian 52 leaf MKII MLC (MicroMo Electronics leaf motor) including a carriage motor (MicroMo Electronics). Results: In most cases, the magnetic encoder of the motors failed prior to any damage to the gearbox or the permanent magnet motor itself. This sets an upper limit of the external magnetic field strength on the motor function. The measured limits of the external magnetic fields were found to vary by the motor type. The leaf motor used with a Varian 52 leaf MKII MLC system tolerated up to 450{+-}10 G. The carriage motor tolerated up to 2000{+-}10 G field. The motors used with the Varian 120 leaf Millennium MLC system were found to tolerate a maximum of 600{+-}10 G. Conclusions: The current Varian MLC system motors can be used for real-time image-guided radiotherapy coupled to a linac-MR system, provided the fringe magnetic fields at their locations are below the determined tolerance levels. With the fringe magnetic fields of linac-MR systems expected to be larger than the

  15. Influence of the airflow speed along transmission lines on the DC corona discharge loss, using finite element approach

    SciTech Connect

    Shemshadi, A.; Akbari, A.; Niayesh, K.

    2012-07-15

    Corona discharge is of great interest from the physical point of view and due to its numerous practical applications in industry and especially one of the most important sources of loss in the high voltage transmission lines. This paper provides guidelines for the amount of electric loss caused by corona phenomenon occurred around a DC high voltage wire placed between two flat plates and influence of wind speed rate on the amount of corona loss using COMSOL Multiphysics. So electric potential distribution patterns and charge density diffusion around the wire are studied in this article.

  16. Report on the technical workshop on WTI incinerator risk issues. Held in Washington, DC on December 8-9, 1993

    SciTech Connect

    Not Available

    1993-12-01

    The report includes information and materials from a peer review workshop organized by EPA's Risk Assessment Forum (RAF) for the Office of Solid Waste and Emergency Response and Region 5. The meeting was held in Washington, DC, at the Holiday Inn Capitol on December 8-9, 1993. The subject of the peer review was a draft project plan prepared by EPA Region 5 for assessing risk at an incinerator operated by Waste Technologies Industries (WTI) in East Liverpool, Ohio. The peer review panel was convened to evaluate the project plan as the scientific foundation for a risk assessment, which will be used in setting final permit conditions for the WTI facility.

  17. Compatibility of an Ultraselective Microcatheter and Epirubicin Loaded 300–500-μm DC Bead in Ex Vivo Study

    SciTech Connect

    Fukuoka, Yasushi Tanaka, Toshihiro Nishiofuku, Hideyuki Sato, Takeshi Kichikawa, Kimihiko

    2015-10-15

    PurposeThe purpose of this study is to examine whether epirubicin loaded DC Bead 300–500 μm in size can pass through a 1.8-Fr ultraselective microcatheter in ex vivo study.MethodsEpirubicin (25 mg/1 mL) loaded 100–300 and 300–500 μm DC Bead were tested. Both sizes were diluted 5, 10, and 30 times using contrast material. Ultraselective microcatheter with the outer diameter of 1.8 Fr and the inner diameter of .017 inch (431.8 μm) was used. The diluted DC Bead was injected at a speed of 1 mL/min, and the pressure was continuously measured. The microspheres’ shapes after ejection were observed by a stereomicroscope.ResultsThe maximum pressure of contrast material alone was 8.40 ± 0.21 psi. The maximum pressure in 5, 10, and 30 times dilution groups of 100–300 μm were 9.67 ± 1.18, 9.25 ± 0.25, and 9.71 ± 0.28 psi, respectively, whereas 21.10 ± 10.2, 10.48 ± 2.14, 10.09 ± 0.37 psi, respectively in 300–500 μm groups. The maximum pressure in 5 times dilution group of 300–500 μm was significantly higher than the other groups (P < 0.05). In 300–500 μm, 4 of 10 measurements showed high pressure over 24 psi (the maximum value was 43.5 psi) in 5 times dilution group, whereas in 10 times and 30 times dilution groups, all measurements showed less than 12 psi. No damages of microspheres were found.ConclusionsEpirubicin loaded DC Bead 300–500 μm in size can pass through a 1.8-Fr ultraselective microcatheter. To avoid high resistance due to microspheres’ aggregation, dilution more than 10 times is needed.

  18. Stressing of turbine-generator-exciter shafts by variable-frequency currents superimposed on DC currents in asynchronous HVDC links and following disturbances at converter stations

    SciTech Connect

    Hammons, T.J.; Bremner, J.J. )

    1994-09-01

    Ripple currents on the DC side of both HVDC synchronous and asynchronous. Links together with cleared HVDC and AC system disturbances can excite in some circumstances onerous torsional vibrations in large steam generator shafts. The problem has assumed importance in recent months on account of the HVDC Link between Scotland and Northern Ireland going ahead, on account of the proposed Eire/Wales Link, and because AC/DC/AC couplers are to be installed extensively to interconnect the East and West European Grid Systems. This paper discusses and analyses excitation of shaft torsional vibrations in steam turbine-generator-exciter shafts in close proximity to HVDC converter stations by (1) variable-frequency ripple currents superimposed on the DC currents in asynchronous Links, and (2) disturbances at bi-polar converter stations. The time response and tables show that for the systems studied variable-frequency ripple currents superimposed on the DC current in asynchronous Links can excite shaft torsional vibrations, the very small noncharacteristic currents could result in onerous shaft torques which might damage the machine, and that DC line faults at converter stations in close proximity of steam turbine-generator units can excite onerous turbine-generator shaft torsional response. Detailed simulation of the HVDC converter and generator is necessary for precise assessments of shaft torsional response following HVDC converter station faults. 500MW, 660MW, 1000MW and 1300MW machines are considered in the analyses that are made.

  19. A Novel Inductor-less DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle Applications

    SciTech Connect

    Du, Zhong; Ozpineci, Burak; Tolbert, Leon M; Chiasson, John N

    2007-01-01

    This paper presents an inductorless cascaded H- bridge multilevel boost inverter for EV and HEV applications. Currently available power inverter systems for HEVs use a DC- DC boost converter to boost the battery voltage for a traditional 3-phase inverter. The present HEV traction drive inverters have low power density, are expensive, and have low efficiency because they need a bulky inductor. An inductorless cascaded H-bridge multilevel boost inverter for EV and HEV applications is proposed in this paper. Traditionally, each H-bridge needs a DC power supply. The proposed inductorless cascaded H-bridge multilevel boost inverter uses a standard 3-leg inverter (one leg for each phase) and an H-bridge in series with each inverter leg which uses a capacitor as the DC power source. Fundamental switching scheme is used to do modulation control and to produce a 5-level phase voltage. Experiments show that the proposed inductorless DC-AC cascaded H-bridge multilevel boost inverter can output a boosted AC voltage.

  20. Browse by Discipline -- E-print Network Subject Pathways: Computer...

    Office of Scientific and Technical Information (OSTI)

    ... - Department of Mathematical Sciences, Lewis and Clark College Nelson, Edward (Edward ... State University, Long Beach Newell, Alan C. (Alan C. Newell) - Department of ...

  1. A Five-Level Three-Phase Cascade Multilevel Inverter Using a Single DC Source for a PM Synchronous Motor Drive

    SciTech Connect

    Ozpineci, Burak; Chiasson, John N; Tolbert, Leon M

    2007-01-01

    The interest here is in using a single DC power source to construct a 3-phase 5-level cascade multilevel inverter to be used as a drive for a PM traction motor. The 5-level inverter consists of a standard 3-leg inverter (one leg for each phase) and an H-bridge in series with each inverter leg, which use a capacitor as a DC source. It is shown that one can simultaneously maintain the regulation of the capacitor voltage while achieving an output voltage waveform which is 25% higher than that obtained using a standard 3-leg inverter by itself.

  2. Temperature dependent DC electrical conductivity studies of ZnO nanoparticle thick films prepared by simple solution combustion method

    SciTech Connect

    Naveen, C. S. Jayanna, H. S. Lamani, Ashok R. Rajeeva, M. P.

    2014-04-24

    ZnO nanoparticles of different size were prepared by varying the molar ratio of glycine and zinc nitrate hexahydrate as fuel and oxidizer (F/O = 0.8, 1.11, 1.7) by simple solution combustion method. Powder samples were characterized by UV-Visible spectrophotometer, X-ray diffractometer, Scanning electron microscope (SEM). DC electrical conductivity measurements at room temperature and in the temperature range of 313-673K were carried out for the prepared thick films and it was found to increase with increase of temperature which confirms the semiconducting nature of the samples. Activation energies were calculated and it was found that, F/O molar ratio 1.7 has low E{sub AL} (Low temperature activation energy) and high E{sub AH} (High temperature activation energy) compared to other samples.

  3. Effect of magnetic field strength on deposition rate and energy flux in a dc magnetron sputtering system

    SciTech Connect

    Ekpe, Samuel D.; Jimenez, Francisco J.; Field, David J.; Davis, Martin J.; Dew, Steven K.

    2009-11-15

    Variations in the magnetic field strongly affect the plasma parameters in a magnetron sputtering system. This in turn affects the throughput as well as the energy flux to the substrate. The variation in the magnetic field in this study, for a dc magnetron process, is achieved by shifting the magnet assembly slightly away from the target. Measurements of the plasma parameters show that while the electron density at the substrate increases with decrease in magnetic field, the electron temperature decreases. The cooling of the electron temperature is consistent with results reported elsewhere. The deposition rate per input magnetron power is found to increase slightly with the decrease in magnetic field for the process conditions considered in this study. Results suggest that the energy flux to the substrate tends to show a general decrease with the shift in the magnet assembly.

  4. Study of the effect of plasma-striking atmosphere on Fe-oxidation in thermal dc arc-plasma processing

    SciTech Connect

    Banerjee, I.; Khollam, Y. B.; Mahapatra, S. K.; Das, A. K.; Bhoraskar, S. V.

    2010-11-15

    The effect of plasma-striking atmosphere: air and air+Ar-gas on the crystallization of Fe-oxide phases was studied using dc thermal arc-plasma processing route. The powders were characterized by x-ray diffraction, vibrating sample magnetometry, transmission electron microscopy, and Moessbauer spectroscopy techniques. At room temperature and O{sub 2} rich atmosphere, arc-evaporated Fe{sup 2+} ions oxidize into either {gamma}-Fe{sub 2}O{sub 3} or Fe{sub 3}O{sub 4} depending upon the combining ratio of Fe with molecular O{sub 2}. Fe/O ratio could be adjusted using proper flow rate of Ar gas to crystallize the pure {gamma}-Fe{sub 2}O{sub 3}.

  5. Reducing Our Carbon Footprint: A Low-Energy House in Berkeley, Kabul, and Washington DC (LBNL Science at the Theater)

    ScienceCinema

    Diamond, Rick

    2016-07-12

    How well can we assess and improve building energy performance in California homes? How much energy-and carbon-do homes use in other parts of the world? Rick Diamond, deputy group leader of the Berkeley Lab Energy Performance of Buildings Group, discusses change, global solutions, and the stories of three houses in Berkeley, Kabul (Afghanistan), and Washington, D.C. Diamond, who is also a senior advisor at the California Institute for Energy and Environment, investigates user interactions with the built environment for improved building energy performance. The group has studied a wide range of issues related to energy use in housing, including duct system efficiency, user behavior, and infiltration and ventilation measurements.

  6. The use of ion chromatography-dc plasma atomic emission spectrometry for the speciation of trace metals

    SciTech Connect

    Urasa, I.T.

    1991-09-20

    The original objects of this research program were: to interface d.c. plasma atomic emission spectrometer with an ion chromatograph; to characterize and optimize the combined systems for application in the speciation of metals in aqueous solutions; to use this system in the study of the solution chemistry of various metals; and to find ways in which the measurement sensitivity of the method can be enhanced, thereby allowing the detection of metal species at low ppb concentration levels. This approach has been used to study the chemistry of and speciate several elements in solution including: arsenic, chromium, iron, manganese, nickel phosphorus, platinum, selenium, and vanadium. During the course of this research, we have found that the solution chemistry of the elements studied and the speciation data obtained can vary considerably depending on the solution, and the chromatographic conditions employed. The speciation of chromium, iron, and vanadium was found to be highly influenced by the acidity of the sample. The element selective nature of the d.c. plasma detector allows these changes to be monitored, thereby providing quantitative information on the new moieties formed. New approaches are being developed including the use of chelating ligands as preconcentration agents for purposes of reducing further the detection limits of the elements of interest and to improve the overall element speciation scheme. New thrusts are being directed towards the employment of post-column derivatization method coupled with colorimetric measurements to detect and quantify metal species eluting from the chromatographic column. The influence of sample acidity on these investigations will be carefully evaluated. These new thrusts are described in the accompanying Project Renewal Proposal.

  7. Straight and chopped dc performance data for a General Electric 5BT 2366C10 motor and an EV-1 controller. Final report

    SciTech Connect

    Edie, P.C.

    1981-01-01

    This report is intended to supply the electric vehicle manufacturer with performance data on the General Electric 5BT 2366C10 series wound dc motor and EV-1 chopper controller. Data are provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing shows the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 86% and 87%, regardless of temperature or mode of operation. When the chopper is utilized, maximum motor efficiency occurs when the chopper duty cycle approaches 100%. At low duty cycles the motor efficiency may be considerably less than the efficiency for straight dc. Chopper efficiency may be assummed to be 95% under all operating conditions. For equal speeds at a given voltage level, the motor operated in the chopped mode develops slightly more torque than it does in the straight dc mode. System block diagrams are included, along with test setup and procedure information.

  8. Supplemental Requirements for the Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2005-10-19

    The Notice supplements review and approval requirements of DOE O 350.2A, Use of Management and Operating (M&O) or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C., Area, dated 10-29-03.

  9. Use of Management and Operating or Other Facility Management Contractor Employees for Services to DOE in the Washington, D.C. Area

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-05-31

    To establish policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), management and operating (M&O) and other facility management contractor employees assigned to the Washington, D.C. area. Supersedes DOE O 350.2A

  10. Senior DOE Officials Return to WIPP

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Innovation and Deployment | Department of Energy Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment Senior Adviser Richard Kauffman to Host Live Chat on Renewable Energy Innovation and Deployment October 19, 2011 - 3:00pm Addthis Washington, D.C. -- Thursday, October 20th, Richard Kauffman, Senior Adviser to the Secretary of Energy, will host the Department of Energy's third "Energy Matters" live chat. Kauffman will discuss the

  11. Solar Decathlon Visitors Guide 2011, National Mall, West Potomac Park, Washington, D.C., September 23 - October 2, 2011 (Brochure)

    SciTech Connect

    Not Available

    2011-09-01

    Guide to the student-designed houses, ten contests, exhibits, and workshops of the U.S. Department of Energy 2011 Solar Decathlon, held in Washington, D.C., from September 23 through October 2, 2011. Teams of college students designed and built the solar-powered houses on display here. They represent 13 U.S. states, five countries, and four continents. Now the teams are rising to the challenge by competing in 10 contests over nine days, with the championship trophy on the line. This is their time to shine. The 2011 teams may share a common goal - to design and build the best energy-efficient house powered by the sun - but their strategies are different. One house is made of precast concrete, while another 'dances' in response to its environment. Another house is meant to sit atop a building, proving the sky's the limit for energy innovation. Whatever your idea of sustainable living may be, you are bound to find it at the Solar Decathlon.

  12. Report of a workshop on nuclear forces and nonproliferation Woodrow Wilson international center for scholars, Washington, DC October 28, 2010

    SciTech Connect

    Pilat, Joseph F

    2010-12-08

    A workshop sponsored by the Los Alamos National Laboratory in cooperation with the Woodrow Wilson International Center for Scholars was held at the Wilson Center in Washington, DC, on October 28, 2010. The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review and the 2010 NPT Review Conference. The discussions reflected the importance of the NPR for defining the role of US nuclear forces in dealing with 21st century threats and providing guidance for National Nuclear Security Administration (NNSA) and Department of Defense (DoD) programs and, for many but not all participants, highlighted its role in the successful outcome of the NPT RevCon. There was widespread support for the NPR and its role in developing the foundations for a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. However, some participants raised concerns about its implementation and its long-term effectiveness and sustainability.

  13. Visible light-induced photocatalytic properties of WO{sub 3} films deposited by dc reactive magnetron sputtering

    SciTech Connect

    Imai, Masahiro; Kikuchi, Maiko; Oka, Nobuto; Shigesato, Yuzo

    2012-05-15

    The authors examined the photocatalytic activity of WO{sub 3} films (thickness 500-600 nm) deposited on a fused quartz substrate heated at 350-800 deg. C by dc reactive magnetron sputtering using a W metal target under the O{sub 2} gas pressure from 1.0 to 5.0 Pa. Films deposited at 800 deg. C under 5.0 Pa have excellent crystallinity of triclinic, P1(1) structure and a large surface area, as confirmed by x-ray diffraction, scanning electron microscopy, and atomic force microscopy. Exposure of acetaldehyde (CH{sub 3}CHO) adsorbed onto the film surface to ultraviolet, visible, or standard fluorescence light induces oxidative photocatalytic decomposition indicated by a decrease in CH{sub 3}CHO concentration and generation of CO{sub 2} gas. For all three types of irradiation, concentration ratio of decreased CH{sub 3}CHO to increased CO{sub 2} is about 1:1, suggesting the possible presence of intermediates. The sputter-deposited WO{sub 3} film can be a good candidate as a visible light-responsive photocatalyst.

  14. Overview of the Climate Change Science Program \\(by Richard Moss...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    3 ARM Science Team Meeting The U.S. Climate Change Science Program Strategic Plan 2003 ARM Science Team Meeting The U.S. Climate Change Science Program Strategic Plan Susan K. ...

  15. Richard Gerber & Clayton Bagwell! NUG Business Meeting!

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    -- 1 --- Allocations Summary * How t he N ERSC p ie i s d istributed - A l i'le h istory * DOE O ffices & P rograms * NERSC r eserves * The E RCAP p rocess * How u ser a ccounts a nd a llocaBons w ork * What h appens w hen u ser/repo r un o ut o f B me * Q & A --- 2 --- Allocations History 0 500000000 1E+09 1.5E+09 2E+09 2.5E+09 3E+09 3.5E+09 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 NERSC DOE P roducEon --- 3 --- 3 Billion Hrs 55 M illion H rs --- 4 --- 2017

  16. Richard Gerber Helen He, Zhengji Zhao, Chris Daley NUG Monthly

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Helen He, Zhengji Zhao, Chris Daley NUG Monthly Meeting --- 1 --- NUG M onthly M ee-ng October 2 , 2 014 Agenda * Hopper and Edison Status Updates * ERCAP ( Alloca-ons) U pdate * Queue C ommiIee T opics * NUGEX Elec-ons * NUG 2 015 M ee-ng P lanning * Mini---Seminar: S teps t o i mprove t he p erformance o f a h ydrodynamics a pplica-on o n t he I ntel M IC architecture --- 2 --- Edison Update" Zhengji Zhao, User Services --- 3 --- Edison Updates * 9/25 7 :30 P DT --- 9 /28 1 :30 P DT D IMM

  17. Richard Gerber! Acting NERSC User Services Group Lead Edison Overview

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Acting NERSC User Services Group Lead Edison Overview --- 1 --- October 1 0, 2 013 Edison Addresses NERSC's Workload Needs 2 Characteris3c Descrip3on Comment Processor Intel I vy B ridge 2 .6 G Hz Fast, c u>ng---edge, c ommodity processor Node Dual---socket, 6 4 G B 1 866 M Hz m emory Large m emory p er n ode Excellent m emory b andwidth Interconnect Cray A ries, d ragonfly t opology Excellent l atency & b andwidth Excellent s caling AdapQve r ouQng e ases c ongesQon Storage 6.48 PB 140 G

  18. Richard Gerber! Deputy Group Lead
 NERSC User Services

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Deputy Group Lead
 NERSC User Services Introduction to High Performance Parallel I/O --- 1 --- August 6 , 2 013 Some s lides f rom K a0e A ntypas Images f rom D avid R andall, P aola C essi, J ohn B ell, T S cheibe I/O Needs Getting Bigger All the Time * I/O n eeds g rowing e ach year i n s cien;fic community * I/O i s a b o?leneck f or many * Data s izes g rowing w ith system memory * For l arge u sers I /O parallelism i s m andatory * Titan h as 1 0 P B o f d isk and Blue Waters 22 PB!!!

  19. Richard Gerber! NERSC Senior Science Advisor! NERSC Training Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Training Lead NERSC Overview --- 1 --- NERSC N ew U ser T raining September 10, 2013 --- 2 --- The m ission o f t he N a.onal E nergy Research S cien.fic C ompu.ng C enter (NERSC) i s t o a ccelerate s cien.fic discovery a t t he D OE O ffice o f S cience through h igh p erformance c ompu.ng and d ata a nalysis. National Energy Research Scientific Computing Center (NERSC) * NERSC i s a n a:onal s upercomputer c enter f unded b y the U.S. Department of Energy Office of Science (SC) - Supports S C

  20. Richard Gerber! NERSC Senior Science Advisor! User Services Group Lead

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    User Services Group Lead NUG Webinar January 2014 --- 1 --- January 9 , 2 014 Agenda * Edison C onfigura6on f or A Y 2 014 * Alloca6on Y ear R ollover I ssues * Project D irectories p er P roject * NUG 2 014 U ser G roup M ee6ng * Automa6c I /O P rofiling f or Y our C ode * Give / T ake U 6lity f or S haring F iles * NUG Q ueue C ommiRee U pdate * User Survey Needs Your Input * Open D iscussion --- 2 --- Edison Update --- 3 --- Jeff B roughton NERSC D eputy f or O pera6ons Systems D epartment H