National Library of Energy BETA

Sample records for building lifetime low-e

  1. Building America Webinar: Low-E Storms: The Next Big Thing in Window

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Retrofits | Department of Energy Low-E Storms: The Next Big Thing in Window Retrofits Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits This Building America webinar presented a new and improved low-e storm window that boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement, on Sept. 9, 2014. Thomas Culp, Birch Point Consulting, LLC, discussed the development of low-e storm windows and examples of success

  2. Text-Alternative Version of Building America Webinar: Low-e Storms: The

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Next "Big Thing" in Window Retrofits | Department of Energy Low-e Storms: The Next "Big Thing" in Window Retrofits Text-Alternative Version of Building America Webinar: Low-e Storms: The Next "Big Thing" in Window Retrofits Low-e Storms: The Next "Big Thing" in Window Retrofits Official Webinar Transcript (September 9, 2014) Pam Cole: Welcome, everyone. Again, this is Low-E Storm Window for Retrofits webinar. I'm Pam Cole and I am a research engineer

  3. Building America's Low-e Storm Window Adoption Program Plan (FY2014)

    SciTech Connect

    Cort, Katherine A.

    2013-12-23

    Low emissivity (low-e) storm windows/panels appear to hold promise for effectively reducing existing home heating, ventilation, and air-conditioning (HVAC) consumption. Due to the affordability of low-e storm windows and the large numbers of existing homes that have low-performing single-pane or double-pane clear windows, a tremendous opportunity exists to provide energy savings by transforming the low-e storm window market and increasing market adoption. This report outlines U.S. Department of Energy (DOE) Building America’s planned market transformation activities in support of low-e storm window adoption during fiscal year (FY) 2014.

  4. Building America Webinar: Low-E Storms: The Next Big Thing in...

    Energy Saver

    This Building America webinar presented a new and improved low-e storm window that boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of ...

  5. Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation from Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments.

  6. Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Energy.gov [DOE]

    Text-Alternative Version of Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

  7. 25 Year Lifetime for Flexible Buildings Integrated Photovoltaics

    SciTech Connect

    Gross, Mark E.

    2010-07-10

    Although preliminary proof-of-principle of the efficacy of barrier materials and processes, first developed by Battelle at PNNL and commercialized by Vitex, has been demonstrated at the laboratory scale, there are several challenges to the practical commercial implementation of these developments in the Buildings Integrated Photovoltaics (BIPV) market. Two important issues that are addressed in this project are identifying a low cost substrate material that can survive in the outside environment (rain, heat, dust, hail, etc.) for 25 years and developing an encapsulation method for the photovoltaic (PV) cells that can meet the required barrier performance without driving the cost of the total barrier package out of range (remaining below $3.00/Wp). Without these solutions, current encapsulation technologies will limit the use of PV for BIPV applications. Flexible, light-weight packaging that can withstand 25 years in the field is required for a totally flexible integrated PV package. The benefit of this research is to make substantial progress in the development of a cost-effective, viable thin film barrier package which will be a critical enabling technology to meet the Solar America Initiative cost and device reliability goals, and to make photovoltaics (PV) more cost-competitive with electricity generated using fossil fuels. Increased PV installations will enable increased US electrical capacity and reduce dependence on imported oil through increased utilization of a widely abundant source of renewable energy (sunlight).

  8. Insulation materials for commercial buildings in North America: An assessment of lifetime energy and environmental impacts

    SciTech Connect

    Biswas, Kaushik; Shrestha, Som S.; Bhandari, Mahabir S.; Desjarlais, Andre Omer

    2015-12-12

    In the United States, commercial buildings accounted for about 19 percent of the total primary energy consumption in 2012. Further, 29 percent of the site energy in commercial buildings was consumed for space heating and cooling. Applying insulation materials to building envelopes is an effective way of reducing energy consumption for heating and cooling, and limiting the negative environmental impacts from the buildings sector. While insulation materials have a net positive impact on the environment due to reduced energy consumption, they also have some negative impacts associated with their 'embodied energy'. The total lifetime environmental impacts of insulation materials are a summation of: (1) direct impacts due to their embodied energy, and (2) indirect or impacts avoided due to the reduced building energy consumption. Here, assessments of the lifetime environmental impacts of selected insulation materials are presented. Direct and indirect environmental impact factors were estimated for the cradle-to-grave insulation life cycle stages. Impact factors were calculated for two categories: primary energy consumption and global warming potential. The direct impact factors were calculated using data from existing literature and a life cycle assessment software. The indirect impact factors were calculated through simulations of a set of standard whole-building models.

  9. Insulation materials for commercial buildings in North America: An assessment of lifetime energy and environmental impacts

    DOE PAGES [OSTI]

    Biswas, Kaushik; Shrestha, Som S.; Bhandari, Mahabir S.; Desjarlais, Andre Omer

    2015-12-12

    In the United States, commercial buildings accounted for about 19 percent of the total primary energy consumption in 2012. Further, 29 percent of the site energy in commercial buildings was consumed for space heating and cooling. Applying insulation materials to building envelopes is an effective way of reducing energy consumption for heating and cooling, and limiting the negative environmental impacts from the buildings sector. While insulation materials have a net positive impact on the environment due to reduced energy consumption, they also have some negative impacts associated with their 'embodied energy'. The total lifetime environmental impacts of insulation materials aremore » a summation of: (1) direct impacts due to their embodied energy, and (2) indirect or impacts avoided due to the reduced building energy consumption. Here, assessments of the lifetime environmental impacts of selected insulation materials are presented. Direct and indirect environmental impact factors were estimated for the cradle-to-grave insulation life cycle stages. Impact factors were calculated for two categories: primary energy consumption and global warming potential. The direct impact factors were calculated using data from existing literature and a life cycle assessment software. The indirect impact factors were calculated through simulations of a set of standard whole-building models.« less

  10. A Protocol for Lifetime Energy and Environmental Impact Assessment of Building Insulation Materials

    SciTech Connect

    Shrestha, Som S; Biswas, Kaushik; Desjarlais, Andre Omer

    2014-01-01

    This article describes a proposed protocol that is intended to provide a comprehensive list of factors to be considered in evaluating the direct and indirect environmental impacts of building insulation materials, as well as detailed descriptions of standardized calculation methodologies to determine those impacts. The energy and environmental impacts of insulation materials can generally be divided into two categories: (1) direct impact due to the embodied energy of the insulation materials and other factors, and (2) indirect or environmental impacts avoided as a result of reduced building energy use due to addition of insulation. Standards and product category rules exist that provide guidelines about the life cycle assessment (LCA) of materials, including building insulation products. However, critical reviews have suggested that these standards fail to provide complete guidance to LCA studies and suffer from ambiguities regarding the determination of the environmental impacts of building insulation and other products. The focus of the assessment protocol described here is to identify all factors that contribute to the total energy and environmental impacts of different insulation products and, more importantly, provide standardized determination methods that will allow comparison of different insulation material types. Further, the intent is not to replace current LCA standards but to provide a well-defined, easy-to-use comparison method for insulation materials using existing LCA guidelines.

  11. A protocol for lifetime energy and environmental impact assessment of building insulation materials

    SciTech Connect

    Shrestha, Som S. Biswas, Kaushik; Desjarlais, Andre O.

    2014-04-01

    This article describes a proposed protocol that is intended to provide a comprehensive list of factors to be considered in evaluating the direct and indirect environmental impacts of building insulation materials, as well as detailed descriptions of standardized calculation methodologies to determine those impacts. The energy and environmental impacts of insulation materials can generally be divided into two categories: (1) direct impact due to the embodied energy of the insulation materials and other factors and (2) indirect or environmental impacts avoided as a result of reduced building energy use due to addition of insulation. Standards and product category rules exist, which provide guidelines about the life cycle assessment (LCA) of materials, including building insulation products. However, critical reviews have suggested that these standards fail to provide complete guidance to LCA studies and suffer from ambiguities regarding the determination of the environmental impacts of building insulation and other products. The focus of the assessment protocol described here is to identify all factors that contribute to the total energy and environmental impacts of different building insulation products and, more importantly, provide standardized determination methods that will allow comparison of different insulation material types. Further, the intent is not to replace current LCA standards but to provide a well-defined, easy-to-use comparison method for insulation materials using existing LCA guidelines. - Highlights: We proposed a protocol to evaluate the environmental impacts of insulation materials. The protocol considers all life cycle stages of an insulation material. Both the direct environmental impacts and the indirect impacts are defined. Standardized calculation methods for the avoided operational energy is defined. Standardized calculation methods for the avoided environmental impact is defined.

  12. R-5 Highly-Insulating Windows and Low-e Storm Windows Volume Purchase Program

    SciTech Connect

    2009-09-30

    Introduces DOE's Building Technologies fenestration RD&D program, and describes the highly insulated R-5 Windows and Low-e Storm Windows Volume Purchase solicitation.

  13. Low-E Retrofit Demonstration and Educational Program

    SciTech Connect

    Culp, Thomas D; Wiehagen, Joseph; Drumheller, S Craig; Siegel, John; Stratmoen, Todd

    2013-11-16

    The objective of this project was to demonstrate the capability of low-emissivity (low-E) storm windows / panels and low-E retrofit glazing systems to significantly and cost effectively improve the energy efficiency of both existing residential and commercial buildings. The key outcomes are listed below: RESIDENTIAL CASE STUDIES: (a) A residential case study in two large multifamily apartment buildings in Philadelphia showed a substantial 18-22% reduction in heating energy use and a 9% reduction in cooling energy use by replacing old clear glass storm windows with modern low-E storm windows. Furthermore, the new low-E storm windows reduced the overall apartment air leakage by an average of 10%. (b) Air leakage testing on interior low-E panels installed in a New York City multifamily building over windows with and without AC units showed that the effective leakage area of the windows was reduced by 77-95%. (c) To study the use of low-E storm windows in a warmer mixed climate with a balance of both heating and cooling, 10 older homes near Atlanta with single pane windows were tested with three types of exterior storm windows: clear glass, low-E glass with high solar heat gain, and low-E glass with lower solar heat gain. The storm windows significantly reduced the overall home air leakage by an average of 17%, or 3.7 ACH50. Considerably high variability in the data made it difficult to draw strong conclusions about the overall energy usage, but for heating periods, the low-E storm windows showed approximately 15% heating energy savings, whereas clear storm windows were neutral in performance. For cooling periods, the low-E storm windows showed a wide range of performance from 2% to over 30% cooling energy savings. Overall, the study showed the potential for significantly more energy savings from using low-E glass versus no storm window or clear glass storm windows in warmer mixed climates, but it is difficult to conclusively say whether one type of low-E performed

  14. Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Historically, only Industrial Facilities (ISO 50003 Industry - light to medium and ... is allowing Commercial Buildings (ISO 50003 - Buildings and Building Complexes) ...

  15. Low-Cost, Highly Transparent Flexible low-e Coating Film to Enable Electrochromic Windows with Increased Energy Savings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Berland, bberland@itnes.com ITN Energy Systems Low-Cost, Highly Transparent Flexible low-e Coating Film to Enable Electrochromic Windows with Increased Energy Savings 2014 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: October 1, 2013 Planned end date: September 30, 2014 Key Milestones 1.Low-e Film: 90% T,vis & R,ir (100 cm 2 ) (Q2) 2.Low-e Film: 90% T,vis & R,ir (2m long, %T,%R variation < 2% cross web) (Q3) 3.Demonstrate Low-e/EC Film (Q3) Budget:

  16. Thermal and Optical Properties of Low-E Storm Windows and Panels

    SciTech Connect

    Culp, Thomas D.; Widder, Sarah H.; Cort, Katherine A.

    2015-07-17

    Installing low-emissivity (low-E) storm windows and panels over existing windows has been identified as a cost-effective new approach for improving the energy efficiency of existing buildings where window replacement is impractical or too expensive. As such, it is desirable to characterize the key energy performance properties of low-E storm windows and panels when installed over different types of existing primary windows. this paper presents the representative U-factors, solar heat gain coefficients (SGHCs) and visible transmittance properties of the combined assemblies of various storm windows and panel types installed over different primary windows.

  17. Build-

    Energy Information Administration (EIA) (indexed site)

    0. Cooling Equipment, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Build- ings*","Cooled Build- ings","Cooling Equipment (more than one may apply)" ,,,"Resid- ential- Type Central Air Condi- tioners","Heat Pumps","Indiv- idual Air Condi- tioners","District Chilled Water","Central Chillers","Pack- aged Air Condi- tioning Units","Swamp

  18. Energy Savings of Low-E Storm Windows and Panels across US Climate Zones

    SciTech Connect

    Culp, Thomas D.; Cort, Katherine A.

    2015-10-01

    This report builds off of previous modeling work related to low-e storm windows used to create a "Database of U.S. Climate-Based Analysis for Low-E Storm Windows." This work updates similar studies using new fuel costs and examining the separate contributions of reduced air leakage and reduced coefficients of overall heat transfer and solar heat gain. In this report we examine the energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates, excluding the impact from infiltration reductions, which tend to vary using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by climate zone.

  19. Building

    Energy Information Administration (EIA) (indexed site)

    DIV. Electricity Consumption and Expenditure Intensities by Census Division, 1999" ,"Electricity Consumption",,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  20. Build-

    Energy Information Administration (EIA) (indexed site)

    1. Cooling Equipment, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Build- ings*","Cooled Build- ings","Cooling Equipment (more than one may apply)" ,,,"Resid- ential- Type Central Air Condi- tioners","Heat Pumps","Indiv- idual Air Condi- tioners","District Chilled Water","Central Chillers","Pack- aged Air Condi- tioning Units","Swamp

  1. Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Superior Energy Performance® Policy Interpretation providing a certification pathway for Commercial Buildings May 7, 2015 Question: As a hotel or university campus, can I use the supporting standards and protocols developed for SEP- Industry to apply for SEP certification? Response: The SEP Administrator is providing this interpretation regarding the types of facilities that can be certified to Superior Energy Performance (SEP). Background: A number of owners/operators of buildings and complex

  2. NREL Engineer Gets Lifetime Achievement Award

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Engineer Gets Lifetime Achievement Award For more information contact: e:mail: Public Affairs Golden, Colo., May 20, 1998 — A senior engineer at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) will receive a major international award for his career-long contributions to the design of energy efficient buildings. Douglas Balcomb has been selected to receive the 1998 Lifetime Achievement Award from the Passive and Low-Energy Architecture (PLEA) network at the group's

  3. Interior and Exterior Low-E Storm Window Installation

    SciTech Connect

    Witters, Sarah

    2014-09-03

    Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings. A new and improved low-e storm window boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement. A recent whole-home experiment performed by PNNL suggests that attaching low-e storm windows can result in as much energy savings replacing the windows.

  4. Building.

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Balance of Plant in ITER refers to plant systems located outside the Tokamak Building. A thick wall of concrete surrounding the main tokamak cryostat and designed to absorb the bulk of any remaining radiation from the plasma or from activated components inside the cryostat. This shields the region outside so that it can be accessed after shutdown for major hands-on repairs. The structure surrounding the plasma in a fusion reactor, within which the fusion-produced neutrons are slowed down, heat

  5. Lifetime and Reliability

    SciTech Connect

    2013-08-01

    Solid-state lighting program technology fact sheet that discusses failure, lifetime, and reliability as they relate to LED-based products.

  6. Lifetime and Reliability

    Energy.gov [DOE]

    A DOE Solid-State Lighting Program technology fact sheet on lifetime, reliability, and failure as related to LED-based products.

  7. Highlighting High Performance Buildings: Department of Environmental Protection-Cambria Office Building, Ebensburg, Pennsylvania

    SciTech Connect

    2001-11-01

    The 36,000-square-foot Cambria Office building used integrated design to minimize energy use, pollution and environmental impact the building will create over its lifetime.

  8. Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits

    Energy.gov [DOE]

    Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings.  A new...

  9. Text-Alternative Version of Building America Webinar: Low-e Storms...

    Energy Saver

    ... If condensation, particularly from inside generated ... insulated windows because of the low solar heat gain coefficient. ... for the lowest heat transfer - too small and the ...

  10. EERE Success Story-Performance Validation of Low-e Storm Windows...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Validation of Low-e Storm Windows Paves Way for Market Acceptance EERE Success Story-Performance Validation of Low-e Storm Windows Paves Way for Market Acceptance September 30, ...

  11. Performance Validation of Low-e Storm Windows Paves Way for Market Acceptance

    Energy.gov [DOE]

    One recent addition to the arsenal of cost-effective efficiency measures is low-emissivity (low-e) storm windows. A low-e coating or glazing is a thin layer deposited directly on the surface of one...

  12. Low-E Storms: The Next "Big Thing" in Window Retrofits

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... PNNL-21678, Pacific Northwest National Laboratory, Richland, WA. 34 How Low-e Storms Save Energy Low-e coating reflects heat back into the space 35 Materials Needed Caulking Gun ...

  13. Analog detection for cavity lifetime spectroscopy

    DOEpatents

    Zare, Richard N.; Harb, Charles C.; Paldus, Barbara A.; Spence, Thomas G.

    2001-05-15

    An analog detection system for determining a ring-down rate or decay rate 1/.tau. of an exponentially decaying ring-down beam issuing from a lifetime or ring-down cavity during a ring-down phase. Alternatively, the analog detection system determines a build-up rate of an exponentially growing beam issuing from the cavity during a ring-up phase. The analog system can be employed in continuous wave cavity ring-down spectroscopy (CW CRDS) and pulsed CRDS (P CRDS) arrangements utilizing any type of ring-down cavity including ring-cavities and linear cavities.

  14. Analog detection for cavity lifetime spectroscopy

    DOEpatents

    Zare, Richard N.; Harb, Charles C.; Paldus, Barbara A.; Spence, Thomas G.

    2003-01-01

    An analog detection system for determining a ring-down rate or decay rate 1/.tau. of an exponentially decaying ring-down beam issuing from a lifetime or ring-down cavity during a ring-down phase. Alternatively, the analog detection system determines a build-up rate of an exponentially growing beam issuing from the cavity during a ring-up phase. The analog system can be employed in continuous wave cavity ring-down spectroscopy (CW CRDS) and pulsed CRDS (P CRDS) arrangements utilizing any type of ring-down cavity including ring-cavities and linear cavities.

  15. Evaluation of Low-E Storm Windows in the PNNL Lab Homes

    SciTech Connect

    Knox, Jake R.; Widder, Sarah H.

    2014-05-31

    This study examines the performance of exterior and interior low-e storm panels with a controlled whole home experimental design using PNNL's Lab Homes. Summing the estimated annual average heating and cooling savings, the installation of low-e storm panels resulted in approximately 10% annual energy savings. The results of the experiment will be used to determine and validate performance of low-e storm windows over double pane clear glass windows in a whole home setting.

  16. Evaluation of Interior Low-E Storm Windows in the PNNL Lab Homes...

    Office of Scientific and Technical Information (OSTI)

    Sponsoring Org: USDOE Country of Publication: United States Language: English Subject: 32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION Lab Homes; Storm; Windows; Low-e; ...

  17. Storm Windows (Even with a Low-E Coating!) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Storm Windows (Even with a Low-E Coating!) Storm Windows (Even with a Low-E Coating!) November 11, 2008 - 3:45pm Addthis John Lippert Earlier I wrote about purchasing energy-efficient windows. Jen followed up with an excellent blog on improving your existing windows, which mentioned low-e films. One fairly well-kept secret-low-emissivity (low-e) storm windows-lies somewhere between these two options. They aren't the simple, low-cost, do-it-yourself option that Jen spoke of. But they are a less

  18. Database of Low-E Storm Window Energy Performance across U.S. Climate Zones (Task ET-WIN-PNNL-FY13-01_5.3)

    SciTech Connect

    Cort, Katherine A.; Culp, Thomas D.

    2013-09-01

    This report describes process, assumptions, and modeling results produced in support of the Emerging Technologies Low-e Storm Windows Task 5.3: Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone. Both sets of calculation results will be made publicly available through the Building America Solution Center.

  19. Highlighting High Performance: Department of Environmental Protection; Cambria Office Building, Ebensburg, Pennsylvania

    SciTech Connect

    2001-11-01

    The 36,000-square-foot Cambria Office building used integrated design to minimize energy use, pollution and environmental impact the building will create over its lifetime.

  20. Low-e Storm Windows: Market Assessment and Pathways to Market Transformation

    SciTech Connect

    Cort, Katherine A.

    2013-06-08

    Field studies sponsored by the U.S. Department of Energy (DOE) have shown that the use of low-e storm windows can lead to significant heating and cooling energy savings in residential homes. This study examines the market for low-e storm windows based on market data, case studies, and recent experience with weatherization deployment programs. It uses information from interviews conducted with DOE researchers and industry partners involved in case studies and early deployment efforts related to low-e storm windows. In addition, this study examines potential barriers to market acceptance, assesses the market and energy savings potential, and identifies opportunities to transform the market for low-e storm windows and overcome market adoption barriers.

  1. EERE Success Story—Performance Validation of Low-e Storm Windows Paves Way for Market Acceptance

    Energy.gov [DOE]

    One recent addition to the arsenal of cost-effective efficiency measures is low-emissivity (low-e) storm windows. A low-e coating or glazing is a thin layer deposited directly on the surface of one...

  2. Database of Low-e Storm Window Energy Performance across U.S. Climate Zones

    SciTech Connect

    Culp, Thomas D.; Cort, Katherine A.

    2014-09-04

    This is an update of a report that describes process, assumptions, and modeling results produced Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone.

  3. Minority Carrier Lifetime Spectroscopy | Photovoltaic Research | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Minority Carrier Lifetime Spectroscopy Minority-carrier lifetime spectroscopy is a method to study the recombination processes of materials optically or electronically. It examines the return of photoexcited carriers back to equilibrium as a function of time and provides a measure of the "lifetime" of the excess carriers. This is accomplished with varying levels of volume excitation and sample temperatures of 4 to 300 K. One optical detection technique called time-correlated

  4. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book

    5 Case Study, The Thermal Test Facility, National Renewable Energy Laboratory, Golden, Colorado (Office/Laboratory) Building Design Floor Area: 10,000 SF Floors(1): 2 Aspect Ratio: 1.75 Offices Laboratories Conference Room Mechanical Level Shell Windows Material U-factor SHGC(2) Viewing Windows: Double Pane, Grey Tint, Low-e 0.42 0.44 Clerestory Windows: Double Pane, Clear, Low-e 0.45 0.65 Window Area(SF) North 38 South(3) 1,134 East 56 West 56 Wall/Roof Material Effective R-Value North Wall

  5. Development of fluorescence lifetime diagnostic. Project accomplishmen...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    and accelerate the transition to the next level of Enhanced Surveillance Program (ESP) sensor sophistication, namely fluorescence lifetime basedmore sensors. less ...

  6. Buildings | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Index for Commercial Buildings Welcome to the Energy Index for Commercial Buildings. Data for this tool comes from the Energy Information Administration's (EIA) 2003 Commercial Buildings Energy Consumption Survey (CBECS). Select categories from the CBECS micro data allow users to search on common building characteristics that impact energy use. Users may select multiple criteria, however if the resulting sample size is too small, the data will be unreliable. If nothing is selected results

  7. Low-cost, highly transparent flexible low-e coating film to enable electrochromic windows with increased energy savings

    SciTech Connect

    Berland, Brian; Hollingsworth, Russell

    2015-03-31

    Five Quads of energy are lost through windows annually in the U.S. Low-e coatings are increasingly employed to reduce the wasted energy. Most commonly, the low-e coating is an oxide material applied directly to the glass at high temperature. With over 100,000,000 existing homes, a retrofit product is crucial to achieve widespread energy savings. Low-e films, i.e. coatings on polymeric substrates, are now also available to meet this need. However, the traditional oxide materials and process is incompatible with low temperature plastics. Alternate high performing low-e films typically incorporate materials that limit visible transmission to 35% or less. Further, the cost is high. The objective of this award was to develop a retrofit, integrated low-e/electrochromic window film to dramatically reduce energy lost through windows. While field testing of state-of-the-art electrochromic (EC) windows show the energy savings are maximized if a low-e coating is used in conjunction with the EC, available low-e films have a low visible transmission (~70% or less) that limits the achievable clear state and therefore, appearance and energy savings potential. Comprehensive energy savings models were completed at Lawrence Berkeley National Lab (LBNL). A parametric approach was used to project energy usage for windows with a large range of low-e properties across all U.S. climate zones, without limiting the study to materials that had already been produced commercially or made in a lab. The model enables projection of energy savings for low-e films as well as integrated low-e/EC products. This project developed a novel low-e film, optimized for compatibility with EC windows, using low temperature, high deposition rate processes for the growth of low-e coatings on plastic films by microwave plasma enhanced chemical vapor deposition. Silica films with good density and optical properties were demonstrated at deposition rates as high as 130Å/sec. A simple bi-layer low-e stack of

  8. Models for Battery Reliability and Lifetime

    SciTech Connect

    Smith, K.; Wood, E.; Santhanagopalan, S.; Kim, G. H.; Neubauer, J.; Pesaran, A.

    2014-03-01

    Models describing battery degradation physics are needed to more accurately understand how battery usage and next-generation battery designs can be optimized for performance and lifetime. Such lifetime models may also reduce the cost of battery aging experiments and shorten the time required to validate battery lifetime. Models for chemical degradation and mechanical stress are reviewed. Experimental analysis of aging data from a commercial iron-phosphate lithium-ion (Li-ion) cell elucidates the relative importance of several mechanical stress-induced degradation mechanisms.

  9. Efficiency and lifetime of carbon foils

    SciTech Connect

    Chou, W.; Kostin, M.; Tang, Z.; /Fermilab

    2006-11-01

    Charge-exchange injection by means of carbon foils is a widely used method in accelerators. This paper discusses two critical issues concerning the use of carbon foils: efficiency and lifetime. An energy scaling of stripping efficiency was suggested and compared with measurements. Several factors that determine the foil lifetime--energy deposition, heating, stress and buckling--were studied by using the simulation codes MARS and ANSYS.

  10. 'Thirsty' Metals Key to Longer Battery Lifetimes

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    'Thirsty' Metals Key to Longer Battery Lifetimes 'Thirsty' Metals Key to Longer Battery Lifetimes Computations at NERSC show how multiply charged metal ions impact battery capacity June 30, 2014 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov PCCPxantheascover Imagine a cell phone battery that lasted a whole week on a single charge. A car battery that worked for months between charges. A massive battery that stores the intermittent electricity from wind turbines and releases it when

  11. LED Luminaire Lifetime: Recommendations For Testing and Reporting...

    Energy Saver

    PDF icon LED Luminaire Lifetime: September 2014 More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED LUMINAIRE LIFETIME: Recommendations ...

  12. Final Report - Three-dimensional minority carrier lifetime mapping...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Three-dimensional minority carrier lifetime mapping of thin film semiconductors for solar cell applications Final Report - Three-dimensional minority carrier lifetime mapping of ...

  13. Polymer Electrolyte Fuel Cell Lifetime Limitations: The Role...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Electrolyte Fuel Cell Lifetime Limitations: The Role of Electrocatalyst Degradation Polymer Electrolyte Fuel Cell Lifetime Limitations: The Role of Electrocatalyst Degradation ...

  14. Statistical and Domain Analytics Applied to PV Module Lifetime...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science ...

  15. Measuring and modeling the lifetime of nitrous oxide including...

    Office of Scientific and Technical Information (OSTI)

    Published Article: Measuring and modeling the lifetime of nitrous oxide including its variability: NITROUS OXIDE AND ITS CHANGING LIFETIME Prev Next Title: Measuring and ...

  16. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book

    2 Case Study, The Cambria Department of Environmental Protection Office Building, Ebensburg, Pennsylvania (Office) Building Design Floor Area: Floors: 2 Open office space (1) File storage area Two small labratories Conference rooms Break room Storage areas Two mechanical rooms Telecom room Shell Windows Material: Triple Pane, low-e with Aluminum Frames and Wood Frames Triple Pane Triple Pane Aluminum Frames Wood Frames U-Factor 0.24 U-Factor 0.26 Wall/Roof Primary Material R-Value Wall :

  17. Industrial Buildings

    Energy Information Administration (EIA) (indexed site)

    Industrial Industrial Manufacturing Buildings Industrialmanufacturing buildings are not considered commercial, but are covered by the Manufacturing Energy Consumption Survey...

  18. Buildings","Building Size"

    Energy Information Administration (EIA) (indexed site)

    ...58,3346,3547,3666,3922 "Building Shell Conservation" "Features (more than one" "may ...23,3385,3993,4866,4938,4032,4746 "HVAC Conservation Features" "(more than one may apply)" ...

  19. Buildings*","Buildings

    Energy Information Administration (EIA) (indexed site)

    Gas","Fuel Oil","District Heat","Propane","Other a" "All Buildings* ... Water ......",33,32,6,8,"Q",24,"Q","N" "Propane ......",502,489,179,40,59...

  20. Prompt Neutron Lifetime for the NBSR Reactor

    SciTech Connect

    Hanson, A.L.; Diamond, D.

    2012-06-24

    In preparation for the proposed conversion of the National Institute of Standards and Technology (NIST) research reactor (NBSR) from high-enriched uranium (HEU) to low-enriched uranium (LEU) fuel, certain point kinetics parameters must be calculated. We report here values of the prompt neutron lifetime that have been calculated using three independent methods. All three sets of calculations demonstrate that the prompt neutron lifetime is shorter for the LEU fuel when compared to the HEU fuel and longer for the equilibrium end-of-cycle (EOC) condition when compared to the equilibrium startup (SU) condition for both the HEU and LEU fuels.

  1. An approach for longer lifetime MCFCs

    SciTech Connect

    Matsumoto, Masaru; Tatsumi, Masahiko; Hayano, Takuro

    1996-12-31

    For entering into commercialization of MCFC power plants in the beginning of the 21st century, we will devote to research for increasing lifetime as long as 40,000 hours with cell performance decay rate of 0.25 %/1000hrs as the target in FY 1999. This paper will discuss on our approach for longer lifetime MCFCs through electrolyte-loss management and NiO precipitation management as well as micro-structural control of electrodes and matrix plates. Cell voltage decay rate will be estimated by simulation through series of experiments on accelerated conditions.

  2. Measurement of the Omega0(c) lifetime

    SciTech Connect

    Iori, M.; Ayan, A.S.; Akgun, U.; Alkhazov, G.; Amaro-Reyes, J.; Atamantchouk, A.G.; Balatz, M.Y.; Blanco-Covarrubias, A.; Bondar, N.F.; Cooper, P.S.; Dauwe, L.J.; /Ball State U. /Bogazici U. /Carnegie Mellon U. /Rio de Janeiro, CBPF /Fermilab /Serpukhov, IHEP /Beijing, Inst. High Energy Phys. /Moscow, ITEP /Heidelberg, Max Planck Inst. /Moscow State U. /St. Petersburg, INP

    2007-01-01

    The authors report a precise measurement of the {Omega}{sub c}{sup 0} lifetime. The data were taken by the SELEX (E781) experiment using 600 GeV/c {Sigma}{sup -}, {pi}{sup -} and p beams. The measurement has been made using 83 {+-} 19 reconstructed {Omega}{sub c}{sup 0} in the {Omega}{sup -} {pi}{sup -}{pi}{sup +}{pi}{sup +} and {Omega}{sup -} {pi}{sup +} decay modes. The lifetime of the {Omega}{sub c}{sup 0} is measured to be 65 {+-} 13(stat) {+-} 9(sys) fs.

  3. B lifetimes and mixing at the Tevatron

    SciTech Connect

    Bedeschi, Franco; /INFN, Pisa

    2005-05-01

    The authors present recent results on b-hadron lifetimes and mixing obtained from the analysis of the data collected at the Tevatron Collider by the CDF and D0 Collaborations in the period 2002-2004. Many lifetime measurements have been updated since the Summer 2004 conferences, sometimes improving significantly the accuracy. Likewise the measurement of the B{sub d} oscillation frequency has been updated. New limits on the B{sub s} oscillation frequency have been determined using for the first time Run II data.

  4. Overview of Field Experience - Degradation Rates & Lifetimes

    SciTech Connect

    Jordan, Dirk; Kurtz, Sarah

    2015-09-14

    The way a PV module fails may depend not only on its design and the materials used in its construction, but also on the weather it experiences, the way it is mounted, and the quality control during its manufacture. This presentation gives an overview of Field Experience - what degradation rates and what lifetimes are being observed in various regions.

  5. House Simulation Protocols (Building America Benchmark) - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    House Simulation Protocols (Building America Benchmark) - Building America Top Innovation House Simulation Protocols (Building America Benchmark) - Building America Top Innovation ...

  6. Mercantile Buildings

    Energy Information Administration (EIA) (indexed site)

    Mercantile Characteristics by Activity... Mercantile Mercantile buildings are those used for the sale and display of goods other than food (buildings used for the sales of food are...

  7. Education Buildings

    Energy Information Administration (EIA) (indexed site)

    Education Characteristics by Activity... Education Education buildings are buildings used for academic or technical classroom instruction, such as elementary, middle, or high...

  8. Buildings Energy Data Book: 3.2 Commercial Sector Characteristics

    Buildings Energy Data Book

    7 Commercial Building Median Lifetimes (Years) Building Type Median (1) 66% Survival (2) 33% Survival (2) Assembly 55 40 75 Education 62 45 86 Food Sales 55 41 74 Food Service 50 35 71 Health Care 55 42 73 Large Office 65 46 92 Mercantile & Service 50 36 69 Small Office 58 41 82 Warehouse 58 41 82 Lodging 53 38 74 Other 60 44 81 Note(s): Source(s): 1) PNNL estimates the median lifetime of commercial buildings is 70-75 years. 2) Number of years after which the building survives. For example,

  9. Quasiparticle inelastic lifetimes in disordered superconducting films

    SciTech Connect

    Devereaux, T.P.; Belitz, D. )

    1991-09-01

    We present a comprehensive theory of quasiparticle inelastic lifetimes close to equilibrium in disordered superconducting films. The lifetime due to Coulomb interactions in two-dimensional (2D) films is calculated in analogy to a recent 3D calculation. For the phonon contribution, we extend the results of Reizer and Sergeyev for clean 3D systems to 2D, and determine the leading disorder renormalization. We then construct an interpolation formula for films of finite thickness that correctly reproduces the 2D and 3D limits. We give a general discussion of our results, and compare them with experiments. Agreement with measurements on thick films is good, while in the 2D limit nonequilibrium effects are likely to play an important role.

  10. Neutrinos and cosmology: a lifetime relationship

    SciTech Connect

    Serpico, Pasquale D.; /Fermilab

    2008-06-01

    We consider the example of neutrino decays to illustrate the profound relation between laboratory neutrino physics and cosmology. Two case studies are presented: In the first one, we show how the high precision cosmic microwave background spectral data collected by the FIRAS instrument on board of COBE, when combined with Lab data, have greatly changed bounds on the radiative neutrino lifetime. In the second case, we speculate on the consequence for neutrino physics of the cosmological detection of neutrino masses even as small as {approx}0.06 eV, the lower limit guaranteed by neutrino oscillation experiments. We show that a detection at that level would improve by many orders of magnitude the existing limits on neutrino lifetime, and as a consequence on some models of neutrino secret interactions.

  11. $B$ mixing and lifetimes at the Tevatron

    SciTech Connect

    Gomez-Ceballos, G.; Piedra, J.

    2006-04-01

    The Tevatron collider at Fermilab provides a very rich environment for the study of b-hadrons. Both the D0 and CDF experiments have collected a sample of about 1 fb{sup -1}. they report results on three topics: b-hadron lifetimes, polarization amplitudes and the decay width difference in B{sub s}{sup 0} {yields} J/{psi}{phi}, and B{sub s}{sup 0} mixing.

  12. Design & Construct New Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Design & Construct New Buildings Design & Construct New Buildings Photo of NREL's Research Support Facility under construction, with two workers straddling I-beams. Establishing and implementing aggressive energy performance goals during the design and construction of new commercial buildings is important to achieving those goals over the lifetime of the building. Energy efficiency measures can be applied in various stages of the design and construction process, including scoping and

  13. NREL: Measurements and Characterization - Minority-Carrier Lifetime...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Photoluminescence Spectroscopy Minority-Carrier Lifetime Spectroscopy Fourier-Transform Infrared & Raman Spectroscopy Spectroscopic Ellipsometry Capacitance Techniques Scanning ...

  14. Buildings*","Buildings

    Energy Information Administration (EIA) (indexed site)

    1. Water-Heating Energy Sources, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Buildings with Water Heating","Water-Heating Energy Sources Used (more than one may apply)" ,,,"Elec- tricity","Natural Gas","Fuel Oil","District Heat","Propane" "All Buildings* ...............",4645,3472,1910,1445,94,27,128 "Building Floorspace"

  15. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book

    3 Case Study, The Visitor Center at Zion National Park, Utah (Service/Retail/Office) Building Design Vistors Center (1): 8,800 SF Comfort Station (2): 2,756 SF Fee Station: 170 SF Shell Windows Type U-Factor SHGC (3) South/East Glass Double Pane Insulating Glass, Low-e, Aluminum Frames, Thermally Broken 0.44 0.44 North/West Glass Double Pane Insulating Glass, Heat Mirror, Aluminum Frames, Thermally Broken 0.37 0.37 Window/Wall Ratio: 28% Wall/Roof Materials Effective R-Value Trombe Walls:

  16. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book

    4 Case Study, The Philip Merrill Environmental Center, Annapolis, Maryland (Office) Building Design Floor Area: 31,000 SF Floors: 2 Footprint: 220 ft. x (1) 2 Floors of open office space Attached pavilion containing: Meeting space Kitchen Staff dining Conference room Shell Windows U-Factor SHGC (2) Type: Double Pane, Low-e, Argon Filled Insulating Glass 0.244 0.41 Wall/Roof Material Effective R-Value Interior Wall plywood, gypsum, SIP foam, and sheathing 28.0 Exterior Wall gypsum and insulated

  17. Buildings Energy Data Book: 9.4 High Performance Buildings

    Buildings Energy Data Book

    6 Case Study, The Solaire, New York, New York (Apartments/Multi-Family) Building Design Floor Area: 357,000 SF Units: 293 Maximum Occupancy: 700 Floors: 27 Site Size: 0.38 Acres Typical Occupancy(1): 578 Black-Water Treatment Facility (2) Shell Windows Material: Double Glazed, Low-e, Thermal Breaks with Insulated Spacers Operable Windows Fixed Windows Visual Transminttance 0.68 0.68 Solar Heat Gain Coefficient 0.35 0.35 U-Factor 0.47 0.41 Wall/Roof Material R-Value Exterior Walls: Insulated

  18. Final report on reliability and lifetime prediction.

    SciTech Connect

    Gillen, Kenneth Todd; Wise, Jonathan; Jones, Gary D.; Causa, Al G.; Terrill, Edward R.; Borowczak, Marc

    2012-12-01

    This document highlights the important results obtained from the subtask of the Goodyear CRADA devoted to better understanding reliability of tires and to developing better lifetime prediction methods. The overall objective was to establish the chemical and physical basis for the degradation of tires using standard as well as unique models and experimental techniques. Of particular interest was the potential application of our unique modulus profiling apparatus for assessing tire properties and for following tire degradation. During the course of this complex investigation, extensive relevant information was generated, including experimental results, data analyses and development of models and instruments. Detailed descriptions of the findings are included in this report.

  19. Building America

    SciTech Connect

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  20. Building technologies

    ScienceCinema

    Jackson, Roderick

    2014-07-15

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  1. Building technologies

    SciTech Connect

    Jackson, Roderick

    2014-07-14

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  2. Revisiting cosmological bounds on radiative neutrino lifetime

    SciTech Connect

    Mirizzi, Alessandro; Montanino, Daniele; Serpico, Pasquale D.

    2007-09-01

    Neutrino oscillation experiments and direct bounds on absolute masses constrain neutrino mass differences to fall into the microwave energy range, for most of the allowed parameter space. As a consequence of these recent phenomenological advances, older constraints on radiative neutrino decays based on diffuse background radiations and assuming strongly hierarchical masses in the eV range are now outdated. We thus derive new bounds on the radiative neutrino lifetime using the high precision cosmic microwave background spectral data collected by the Far Infrared Absolute Spectrophotometer instrument on board the Cosmic Background Explorer. The lower bound on the lifetime is between a fewx10{sup 19} s and {approx}5x10{sup 20} s, depending on the neutrino mass ordering and on the absolute mass scale. However, due to phase space limitations, the upper bound in terms of the effective magnetic moment mediating the decay is not better than {approx}10{sup -8} Bohr magnetons. We also comment about possible improvements of these limits, by means of recent diffuse infrared photon background data. We compare these bounds with preexisting limits coming from laboratory or astrophysical arguments. We emphasize the complementarity of our results with others available in the literature.

  3. Request for Information for Photovoltaic Lifetime Project

    Office of Energy Efficiency and Renewable Energy (EERE)

    In return on investment calculations, the degradation and service lifetimes of PV modules are often assumed to be the same across different panels. Due to the typically slow pace of degradation in operating solar modules, often less than 1% (relative) per year, as well as variations in the operating and test conditions, the differences in panel degradation rates are difficult both to measure and compare. Much of the degradation data available to date involves precise measurement of the module performance at only one (end of life) or two (end of life and beginning of life) points in time. If the module’s degradation profile is not linear, a significant miscalculation of levelized cost of energy may result. The purpose of this RFI is to solicit feedback from industry, academia, research laboratories, government agencies, and other stakeholders to identify approaches that would expand the dataset publicly available for service lifetime prediction for PV systems; specifically, data that would better inform calculations of the return on investment of existing and future PV installations.

  4. Beardmore Building

    Building Catalog

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration. 05/15/2015 - 10:23

  5. Accelerated stress rupture lifetime assessment for fiber composites

    SciTech Connect

    Groves, S.E.; DeTeresa, S.J.; Sanchez, R.J.; Zocher, M.A.; Christensen, R.M.

    1997-02-01

    Objective was to develop a theoretical and experimental framework for predicting stress rupture lifetime for fiber polymer composites based on short-term accelerated testing. Originally a 3-year project, it was terminated after the first year, which included stress rupture experiments and viscoelastic material characterization. In principle, higher temperature, stress, and saturated environmental conditions are used to accelerate stress rupture. Two types of specimens were to be subjected to long-term and accelerated static tensile loading at various temperatures, loads in order to quantify both fiber and matrix dominated failures. Also, we were to apply state-of-the-art analytical and experimental characterization techniques developed under a previous DOE/DP CRADA for capturing and tracking incipient degradation mechanisms associated with mechanical performance. Focus was increase our confidence to design, analyze, and build long-term composite structures such as flywheels and hydrogen gas storage vessels; other applications include advanced conventional weapons, infrastructures, marine and offshore systems, and stockpile stewardship and surveillance. Capabilities developed under this project, though not completed or verified, are being applied to NIF, AVLIS, and SSMP programs.

  6. Finite quasiparticle lifetime in disordered superconductors.

    SciTech Connect

    Zemlicka, M.; Neilinger, P.; Trgala, M; Rehak, M; Manca, D.; Grajcar, M.; Szabo, P.; Samuely, P.; Gazi, S.; Hubner, U.; Vinokur, V. M.; Il'ichev, E.

    2015-12-08

    We investigate the complex conductivity of a highly disordered MoC superconducting film with k(F)l approximate to 1, where k(F) is the Fermi wave number and l is the mean free path, derived from experimental transmission characteristics of coplanar waveguide resonators in a wide temperature range below the superconducting transition temperature T-c. We find that the original Mattis-Bardeen model with a finite quasiparticle lifetime, tau, offers a perfect description of the experimentally observed complex conductivity. We show that iota is appreciably reduced by scattering effects. Characteristics of the scattering centers are independently found by scanning tunneling spectroscopy and agree with those determined from the complex conductivity.

  7. Laboratory Building.

    SciTech Connect

    Herrera, Joshua M.

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  8. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    WHITE RIVER BASIN COMPREHENSIVE STUDY BUILDING STRONG ® * The Cache River Basin portion of the Watershed Management Plan will be completed in FY15. * Next step will be a watershed assessment for the entire White River Basin and move forward in developing a Comprehensive Watershed Management Plan. CURRENT STATUS BUILDING STRONG ® WATER SUPPLY STORAGE REALLOCATIONS BUILDING STRONG ® M&I Water Supply Reallocation Studies Greers Ferry Lake * Current Study * Request from MAWA for 15.25 mgd

  9. Vacant Buildings

    Energy Information Administration (EIA) (indexed site)

    Vacant Characteristics by Activity... Vacant Vacant buildings are those in which more floorspace was vacant than was used for any single commercial activity at the time of the...

  10. Service Buildings

    Energy Information Administration (EIA) (indexed site)

    Service Characteristics by Activity... Service Service buildings are those in which some type of service is provided, other than food service or retail sales of goods. Basic...

  11. Other Buildings

    Energy Information Administration (EIA) (indexed site)

    Other Characteristics by Activity... Other Other buildings are those that do not fit into any of the specifically named categories. Basic Characteristics See also: Equipment |...

  12. Buildings Database

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Efficiency & Renewable Energy EERE Home | Programs & Offices | Consumer Information Buildings Database Welcome Guest Log In | Register | Contact Us Home About All Projects...

  13. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    BUILDING STRONG ® WATER SUPPLY STORAGE REALLOCATION STUDIES BUILDING STRONG ® Beaver Lake Project Area BUILDING STRONG ® M&I Water Supply Reallocation - Beaver Lake * Current Study - Total Request for 22 mgd (41,960 ac-ft)  Benton Washington in 2000 for 12.0 mgd (22,887.11 ac-ft)  Carroll Boone in 2001 for 6.0 mgd (11,443.66 ac-ft)  Madison County in 2006 for 4.0 mgd (7,629.04 ac-ft) BUILDING STRONG ® M&I Water Supply Reallocation - Beaver Lake Continued. . . * Current Tasks

  14. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

    Office of Scientific and Technical Information (OSTI)

    Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation Neubauer, J. 25 ENERGY STORAGE BATTERY; LITHIUM-ION; STATIONARY ENERGY STORAGE; BLAST; BATTERY DEGRADATION;...

  15. Finite Lifetime Effects on the Polarizability Within Time-dependent...

    Office of Scientific and Technical Information (OSTI)

    Density-functional Theory Citation Details In-Document Search Title: Finite Lifetime Effects on the Polarizability Within Time-dependent Density-functional Theory The research ...

  16. Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces...

    Office of Scientific and Technical Information (OSTI)

    selective stimulation by bringing the electrical interface close to the neural tissue in ... to the current cuffs in terms of their electrical performance, lifetime, shape, and ...

  17. LED LUMINAIRE LIFETIME: Recommendations for Testing and Reporting...

    Energy Saver

    More Documents & Publications System Reliability Model for Solid-State Lighting Luminaires LED Luminaire Lifetime: Recommendations For Testing and Reporting System Reliability ...

  18. Predictive Models of Li-ion Battery Lifetime (Presentation) ...

    Office of Scientific and Technical Information (OSTI)

    Opportunities for extending the lifetime of commercial battery systems are explored. Authors: Smith, K. ; Wood, E. ; Santhanagopalan, S. ; Kim, G. ; Shi, Y. ; Pesaran, A. ...

  19. Bubble-chamber experiments on charmed-particle lifetimes

    SciTech Connect

    Field, R.C.

    1982-07-01

    The three current bubble-chamber experiments on charmed-particle lifetimes are compared. Their most recently released results are discussed.

  20. Predictive Models of Li-ion Battery Lifetime (Presentation) Smith...

    Office of Scientific and Technical Information (OSTI)

    Predictive Models of Li-ion Battery Lifetime (Presentation) Smith, K.; Wood, E.; Santhanagopalan, S.; Kim, G.; Shi, Y.; Pesaran, A. 25 ENERGY STORAGE; 33 ADVANCED PROPULSION...

  1. Residential Building Energy Analysis

    Energy Science and Technology Software Center

    1990-09-01

    PEAR (Program for Energy Analysis of Residences) provides an easy-to-use and accurate method of estimating the energy and cost savings associated with various energy conservation measures in site-built single-family homes. Measures such as ceiling, wall, and floor insulation; different window type and glazing layers; infiltration levels; and equipment efficiency can be considered. PEAR also allows the user to consider the effects of roof and wall color, movable night insulation on the windows, reflective and heatmore » absorbing glass, an attached sunspace, and use of a night temperature setback. Regression techniques permit adjustments for different building geometries, window areas and orientations, wall construction, and extension of the data to 880 U.S. locations determined by climate parameters. Based on annual energy savings, user-specified costs of conservation measures, fuel, lifetime of measure, loan period, and fuel escalation and interest rates, PEAR calculates two economic indicators; the Simple Payback Period (SPP) and the Savings-to-Investment Ratio (SIR). Energy and cost savings of different sets of conservation measures can be compared in a single run. The program can be used both as a research tool by energy policy analysts and as a method for nontechnical energy calculation by architects, home builders, home owners, and others in the building industry.« less

  2. Intelligent Buildings

    SciTech Connect

    Brambley, Michael R.; Armstrong, Peter R.; Kintner-Meyer, Michael CW; Pratt, Robert G.; Katipamula, Srinivas

    2001-01-01

    The topic of "intelligent buildings" (IBs) emerged in the early 1980s. Since, the term has been used to represent a variety of related, yet differing topics, each with a slightly different focus and purpose. Wiring and networking-infrastructure companies emphasize the cabling requirements for communication in intelligent buildings and the need to accommodate future needs for higher-speed broadband. Lucent (Lucent 2000) for example, defines an IB as "...one with a completely integrated wiring architecture. A single cabling system that handles all information traffic - voice, data, video, even the big building management systems."

  3. Office Buildings

    Energy Information Administration (EIA) (indexed site)

    page, please call 202-586-8800. There were enough buildings in the responding sample to report statistics for all of these types except for research and development, which has...

  4. Lodging Buildings

    Energy Information Administration (EIA) (indexed site)

    were then asked to place the building into the following more specific categories: a hotel a motel, inn, or resort a retirement home a shelter, orphanage, or children's home a...

  5. Building America Expert Meeting: Transforming Existing Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report ...

  6. Building America Webinar: Ventilation in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential ...

  7. Building America Webinar: High Performance Building Enclosures...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Webinar: High Performance Building Enclosures: Part I, Existing Homes The webinar, presented on May 21, 2014, focused on specific Building America projects that ...

  8. Building America Residential Buildings Energy Efficiency Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link to the summary report and ...

  9. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving ...

  10. Lifetime of the phonons in the PLT ceramic

    SciTech Connect

    Barba-Ortega, J. Joya, M. R.; Londoño, F. A.

    2014-11-05

    The lifetimes at higher temperatures on lanthanum-modified lead titanate (PLT) are mainly due to the anharmonic decay of optical phonons into low-energy phonons. The temperature-independent contributions from inherent crystal defects and from boundary scattering become comparable to the phonon scattering contribution at lower temperatures. The thermal interaction is large at higher temperatures which decreases the phonon mean free path, and so the decay lifetime decreases as the temperature of the system is increased. This leads to the increased line width at higher temperatures. We made an estimate of the lifetimes for different concentrations and temperatures in PLT.

  11. Archive Reference Buildings by Building Type: Warehouse

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  12. The Lifetime of a beautiful and charming meson: B_c lifetime measured using the D0 detector

    SciTech Connect

    Welty-Rieger, Leah Christine; /Indiana U.

    2008-09-01

    Using approximately 1.3 fb{sup -1} of data collected by the D0 detector between 2002 and 2006, the lifetime of the B{sub c}{sup {+-}} meson is studied in the B{sub c}{sup {+-}} {yields} J/{psi}{mu}{sup {+-}} + X final state. Using an unbinned likelihood simultaneous fit to J/{psi} + {mu} invariant mass and lifetime distributions, a signal of 810 {+-} 80(stat.) candidates is estimated and a lifetime measurement made of: {tau}(B{sub c}{sup {+-}}) = 0.448{sub -0.036}{sup +0.038}(stat) {+-} 0.032(sys) ps.

  13. DC photogun vacuum characterization through photocathode lifetime studies

    SciTech Connect

    Marcy Stutzman; Joseph Grames; Matt Poelker; Kenneth Surles-Law; Philip Adderley

    2007-07-02

    Excellent vacuum is essential for long photocathode lifetimes in DC high voltage photoelectron guns. Vacuum Research at Thomas Jefferson National Accelerator Facility has focused on characterizing the existing vacuum systems at the CEBAF polarized photoinjector and on quantifying improvements for new systems. Vacuum chamber preprocessing, full activation of NEG pumps and NEG coating the chamber walls should improve the vacuum within the electron gun, however, pressure measurement is difficult at pressures approaching the extreme-high-vacuum (XHV) region and extractor gauge readings are not significantly different between the improved and original systems. The ultimate test of vacuum in a DC high voltage photogun is the photocathode lifetime, which is limited by the ionization and back-bombardment of residual gasses. Discussion will include our new load-locked gun design as well as lifetime measurements in both our operational and new photo-guns, and the correlations between measured vacuum and lifetimes will be investigated.

  14. NREL Launches Partnership with Solarmer Energy to Extend Lifetime...

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    The joint research covered by the CRADA will explore the lifetime and stability of the organic photovoltaic (OPV) devices that make up the energy-harvesting layers of plastic solar ...

  15. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    BUILDING STRONG ® Progress  Engaged with Customers in January 2016  Reached out to USBR on Customer Funding of O&M for Sacramento Projects  Reached out to NWD for the Metrics and gathering of the data  Data Mining 5 years of labor data  Gathered information on past and current staffing of plats 5 BUILDING STRONG ® Delivery dates  Late August 2016- Labor Data and manpower  DRAFT metrics to SWPA- October 2016  Meet with Customer Team- November- December 2016 6

  16. Predictive Models of Li-ion Battery Lifetime (Presentation) (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Predictive Models of Li-ion Battery Lifetime (Presentation) Citation Details In-Document Search Title: Predictive Models of Li-ion Battery Lifetime (Presentation) Predictive models of Li-ion battery reliability must consider a multiplicity of electrochemical, thermal and mechanical degradation modes experienced by batteries in application environments. Complicating matters, Li-ion batteries can experience several path dependent degradation trajectories dependent on storage

  17. Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces for

    Office of Scientific and Technical Information (OSTI)

    Neuroprostheses (Technical Report) | SciTech Connect Technical Report: Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces for Neuroprostheses Citation Details In-Document Search Title: Silicone Molding and Lifetime Testing of Peripheral Nerve Interfaces for Neuroprostheses Implantable peripheral nerve cuffs have a large application in neuroprostheses as they can be used to restore sensation to those with upper limb amputations. Modern day prosthetics, while lessening the

  18. Extended carrier lifetimes and diffusion in hybrid perovskites revealed by

    Office of Scientific and Technical Information (OSTI)

    Hall effect and photoconductivity measurements (Journal Article) | DOE PAGES Extended carrier lifetimes and diffusion in hybrid perovskites revealed by Hall effect and photoconductivity measurements Title: Extended carrier lifetimes and diffusion in hybrid perovskites revealed by Hall effect and photoconductivity measurements Impressive performance of hybrid perovskite solar cells reported in recent years still awaits a comprehensive understanding of its microscopic origins. In this work,

  19. Predictive Models of Li-ion Battery Lifetime

    SciTech Connect

    Smith, Kandler; Wood, Eric; Santhanagopalan, Shriram; Kim, Gi-heon; Shi, Ying; Pesaran, Ahmad

    2015-06-15

    It remains an open question how best to predict real-world battery lifetime based on accelerated calendar and cycle aging data from the laboratory. Multiple degradation mechanisms due to (electro)chemical, thermal, and mechanical coupled phenomena influence Li-ion battery lifetime, each with different dependence on time, cycling and thermal environment. The standardization of life predictive models would benefit the industry by reducing test time and streamlining development of system controls.

  20. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation Citation Details In-Document Search Title: Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation The deployment and use of lithium-ion (Li-ion) batteries in automotive and stationary energy storage applications must be optimized to justify their high up-front costs. Given that batteries degrade with use and storage, such optimizations must evaluate many years of operation.

  1. High Precision Measurement of the 19Ne Lifetime

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Precision Measurement of the 19 Ne Lifetime by Leah Jacklyn Broussard Department of Physics Duke University Date: Approved: Albert Young Calvin Howell Kate Scholberg Berndt Mueller John Thomas Dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Physics in the Graduate School of Duke University 2012 Abstract (Nuclear physics) High Precision Measurement of the 19 Ne Lifetime by Leah Jacklyn Broussard Department of Physics

  2. Highlighting High Performance: Department of Environmental Protection; Cambria Office Building, Ebensburg, Pennsylvania

    SciTech Connect

    Not Available

    2001-10-01

    The 36,000-square-foot Cambria Office building in Ebensbug, Pennsylvania houses the Pennsylvania Department of Environmental Protection. Designers of the energy-efficient building used integrated design to minimize energy use and pollution created in the production of the materials they used, and reduced the overall pollution and environmental impact the building will create over its lifetime. The building also employs daylighting and renewable energy technologies.

  3. Energy Efficient Buildings Hub

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  4. Commercial Buildings Consortium

    Energy.gov [DOE]

    Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  5. Building Technologies Office Overview

    SciTech Connect

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  6. Energy Efficient Buildings Hub

    SciTech Connect

    2013-04-01

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  7. Commercial Building Partnership

    Energy.gov [DOE]

    Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  8. Building America System Research

    SciTech Connect

    2013-04-01

    Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  9. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    BUILDING STRONG ® Communications * Division and District Command level strategic involvement * Increased communication * Refined business processes * Routine bi-weekly meeting of hydropower technical leads * Increased communication * Lessons learned and best practices shared real time on current issues * Strengthened partnership * Strategic meetings * Discussions concerning common work activities developing regional approaches * HDC Partnering * Increased communication * All Districts in SWPA

  10. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    * Project Scope: Replace three turbines, rewind three generators and rehabilitate all cranes, tailrace and intake gates and bulkheads. * Total Project cost: $84.7M ($79.9M customer funded) * Turbine Contract Awarded: February 2008 * Awarded Turbine Contract Amount: $39.3M * Current Turbine Contract Amount: $47.1M * Current Required Completion Date : 5 October 2012 * Anticipated Completion Date: 6 June 2016 Webbers Falls Scope, Cost and Schedule BUILDING STRONG ® Webbers Falls Current Project

  11. BUILDING STRONG

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Interior Least Tern Operations and Habitat Creation Arkansas River Corridor Lake Eufaula Advisory Committee Tenkiller Downstream Fishery Issues DO / Minimum Flows Broken Bow Seasonal Pool Update Cultural Resources Impacts Arkansas River Navigation Improvement BUILDING STRONG ® Interior Least Tern Operations and Habitat Creation A new biological opinion is underway and expected to be available in the coming weeks. We expect no change in the Least Tern program resulting from the opinion. The

  12. Building America Building Science Translator

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Science Translator February 2015 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affliated partners, make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use

  13. Btu)","per Building

    Energy Information Administration (EIA) (indexed site)

    ,"Number of Buildings (thousand)","Floorspace (million square feet)","Floorspace per Building (thousand square feet)","Total (trillion Btu)","per Building (million Btu)","per...

  14. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Rhode Island Building Code Standards Committee adopts, promulgates and administers the state building code. Compliance is determined through the building permit and inspection process by local...

  15. 1999 Commercial Buildings Characteristics

    Energy Information Administration (EIA) (indexed site)

    Data Reports > 2003 Building Characteristics Overview 1999 Commercial Buildings Energy Consumption SurveyCommercial Buildings Characteristics Released: May 2002 Topics: Energy...

  16. Radiative lifetimes of metastable states of negative ions

    SciTech Connect

    Andersson, Pontus; Fritioff, Karin; Sandstroem, Joakim; Collins, Gerard; Hanstorp, Dag; Ellmann, Anna; Schef, Peter; Lundin, Peter; Mannervik, Sven; Royen, Peder; Froese Fischer, K. Charlotte; Oesterdahl, Fabian; Rostohar, Danijela; Pegg, David J.; Gibson, N. D.; Danared, Haakan; Kaellberg, Anders

    2006-03-15

    We present a technique for measuring the radiative lifetimes of metastable states of negative ions that involves the use of a heavy-ion storage ring. The method has been applied to investigate the radiative decay of the np{sup 3} {sup 2}P{sub 1/2} levels of Te{sup -}(n=5) and Se{sup -}(n=4) and the 3p{sup 3} {sup 2}D state of Si{sup -} for which the J=3/2 and 5/2 levels were unresolved. All of these states are metastable and decay primarily by emission of E2 and M1 radiation. Multi Configuration Dirac-Hartree-Fock calculations of rates for the transitions in Te{sup -} and Se{sup -} yielded lifetimes of 0.45 s and 4.7 s, respectively. The measured values agree well with these predicted values. In the case of the {sup 2}D state of Si{sup -}, however, our measurement was only able to set a lower limit on the lifetime. The upper limit of the lifetime that can be measured with our apparatus is set by how long the ions can be stored in the ring, a limit determined by the rate of collisional detachment. Our lower limit of 1 min for the lifetime of the {sup 2}D state is consistent with both the calculated lifetimes of 162 s for the {sup 2}D{sub 3/2} level and 27.3 h for the {sup 2}D{sub 5/2} level reported by O'Malley and Beck and 14.5 h and 12.5 h, respectively, from our Breit-Pauli calculations.

  17. Effect of Superalloy Substrate and Bond Coating on TBC Lifetime

    SciTech Connect

    Pint, Bruce A; Haynes, James A; Zhang, Ying

    2010-01-01

    Several different single-crystal superalloys were coated with different bond coatings to study the effect of composition on the cyclic oxidation lifetime of an yttria-stabilized zirconia (YSZ) top coating deposited by electron beam physical vapor deposition from a commercial source. Three different superalloys were coated with a 7 {micro}m Pt layer that was diffused into the surface prior to YSZ deposition. One of the superalloys, N5, was coated with a low activity, Pt-modified aluminide coating and Pt-diffusion coatings with 3 and 7 {micro}m of Pt. Three coatings of each type were furnace cycled to failure in 1 h cycles at 1150 C to assess average coating lifetime. The 7 {micro}m Pt diffusion coating on N5 had an average YSZ coating lifetime >50% higher than a Pt-modified aluminide coating on N5. Without a YSZ coating, the Pt-modified aluminide coating on N5 showed the typical surface deformation during cycling, however, the deformation was greatly reduced when constrained by the YSZ coating. The 3 {micro}m Pt diffusion coating had a similar average lifetime as the Pt-modified aluminide coating but a much wider scatter. The Pt diffusion bond coating on superalloy X4 containing Ti exhibited the shortest YSZ coating lifetime, this alloy-coating combination also showed the worst alumina scale adhesion without a YSZ coating. The third generation superalloy N6 exhibited the longest coating lifetime with a 7 {micro}m Pt diffusion coating.

  18. Building Technologies Program: Building America Publications

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and existing homes provided by the Building America Program.You may also visit the new Solution Center to find expert building science and energy efficiency resources. RSS...

  19. Office Buildings - Types of Office Buildings

    Energy Information Administration (EIA) (indexed site)

    administration building Insurance company headquarters building Local insurance agency Social services office Attorney's office Real estate sales office Government office State...

  20. 1999 Commercial Buildings Characteristics--Building Size

    Energy Information Administration (EIA) (indexed site)

    (202) 586-8800. Energy Information Administration Commercial Buildings Energy Consumption Survey Top Return to: "1999 CBECS-Commercial Buildings Characteristics" Specific questions...

  1. Buildings Interoperability Planning: Connected Buildings Interoperabil...

    Energy.gov [DOE] (indexed site)

    Vision Context Steve Widergren PNNL 11 March 2015 Topics Purpose of meeting Buildings automation in the transformative time of connectivity Interoperability - a connected buildings...

  2. Models for Battery Reliability and Lifetime: Applications in Design and Health Management (Presentation)

    SciTech Connect

    Smith, K.; Neubauer, J.; Wood, E.; Jun, M.; Pesaran, A.

    2013-06-01

    This presentation discusses models for battery reliability and lifetime and the Battery Ownership Model.

  3. High pressure slurry pump. Sand slurry test loop design and results. Wear parts lifetime analysis

    SciTech Connect

    Fongaro, S.; Severini, P.; Vinciguerra, G.

    2000-07-01

    This paper shows the experimental phase, following previous work presented at the Sixth International Conference on ``Multiphase Flow in Industrial Plants'', Milan, September 98. A Sand Water Slurry Test Loop has been tested using different sand percentages for a total power of 680 HP with a flow-rate of 35,000 [gpm] and pressure of 2300 [psig]. Its design considered, carefully, the particles build-up effect respecting flow velocity and dead space along the loop and into the hydraulics. The test pump is a TRIPLEX SINGLE ACTING that is one third of the COAL SLURRY SEPTUPLEX PUMP designed for a CHINA PROJECT. Wear rate on the main parts of an high pressure slurry pump have been analyzed running at 145 rpm (piston mean speed of 3.3 [ft/s]) with a net flow of 33,290 [gpm] and pressures between 1216 and 1575 [psig]. Tests gave indications of a damaging process on valves, piston seals and the relative weight on the overall damages. Design changes of piston-seal and its material have been done, results being a longer parts lifetime. The authors compared the results with literature on coal slurry and other sand tests. The pump speed, i.e., valve cycle, isn't the main wear factor, while the fluid speed under the valve is. Their goals are to improve the wear parts lifetime and define functions to relate the wear to operating parameters, design choice, and materials used.

  4. 1999 Commercial Building Characteristics--Building Activity Comparison

    Energy Information Administration (EIA) (indexed site)

    Building Activity Comparison Percentage of Floorspace and Buildings by Principal Building Activity, 1999 Percentage of Floorspace and Buildings by Principal Building Activity,...

  5. BSC: Building America, Building Science Consortium - 2015 Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BSC: Building America, Building Science Consortium - 2015 Peer Review BSC: Building America, Building Science Consortium - 2015 Peer Review Presenter: Joe Lstiburek, Building ...

  6. Buildings | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    influence a building, including incentives, utilities, weather, climate, and locationground temperature. Municipalities and Renewable Energy Opportunities Building...

  7. Building Envelope Stakeholder Workshop

    Energy.gov [DOE]

    Oak Ridge National Laboratory is hosting a building envelope stakeholder workshop on behalf of the DOE Building Technologies Office.

  8. Commercial Buildings Integration Program

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... * ISO 50001: Conformant Energy Management Systems * Small Building Energy Management * BEM Library * Financing Turnkey Energy Efficiency Solutions * Whole Building Energy ...

  9. Commercial Buildings Energy Consumption Survey - Office Buildings

    Reports and Publications

    2010-01-01

    Provides an in-depth look at this building type as reported in the 2003 Commercial Buildings Energy Consumption Survey. Office buildings are the most common type of commercial building and they consumed more than 17% of all energy in the commercial buildings sector in 2003. This special report provides characteristics and energy consumption data by type of office building (e.g. administrative office, government office, medical office) and information on some of the types of equipment found in office buildings: heating and cooling equipment, computers, servers, printers, and photocopiers.

  10. Building America Whole-House Solutions for New Homes: John Wesley Miller, Tucson, Arizona

    Energy.gov [DOE]

    Case study of John Wesley Miller Companies, who worked with the NAHBRC to build two net-zero energy homes with foam-sheathed masonry walls, low-E windows 2.9 ACH50 air sealing, transfer grilles, ducts in insulated attic, PV, and solar water heating.

  11. Building energy analysis tool

    DOEpatents

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  12. Building America

    SciTech Connect

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  13. Jackson Park Hospital Green Building Medical Center

    SciTech Connect

    William Dorsey; Nelson Vasquez

    2010-03-31

    Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further

  14. Apparatus for measuring minority carrier lifetimes in semiconductor materials

    DOEpatents

    Ahrenkiel, Richard K.

    1999-01-01

    An apparatus for determining the minority carrier lifetime of a semiconductor sample includes a positioner for moving the sample relative to a coil. The coil is connected to a bridge circuit such that the impedance of one arm of the bridge circuit is varied as sample is positioned relative to the coil. The sample is positioned relative to the coil such that any change in the photoconductance of the sample created by illumination of the sample creates a linearly related change in the input impedance of the bridge circuit. In addition, the apparatus is calibrated to work at a fixed frequency so that the apparatus maintains a consistently high sensitivity and high linearly for samples of different sizes, shapes, and material properties. When a light source illuminates the sample, the impedance of the bridge circuit is altered as excess carriers are generated in the sample, thereby producing a measurable signal indicative of the minority carrier lifetimes or recombination rates of the sample.

  15. NREL: Energy Storage - Battery Lifetime Analysis and Simulation Tool Suite

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Battery Lifetime Analysis and Simulation Tool Suite Lithium-ion (Li-ion) batteries used in EVs and stationary energy storage applications must be optimized to justify their high upfront costs. Given that batteries degrade with use and storage, strategies for optimization must factor in many years of use with a number of variables, including: Temperature State-of-charge histories Electricity current levels Cycle depth and frequency. These factors can all affect rates of battery degradation,

  16. Orientation-Dependent Entanglement Lifetime in a Squeezed Atomic Clock

    SciTech Connect

    Leroux, Ian D.; Schleier-Smith, Monika H.; Vuletic, Vladan

    2010-06-25

    We study experimentally the application of a class of entangled states, squeezed spin states, to the improvement of atomic-clock precision. In the presence of anisotropic noise, the entanglement lifetime is strongly dependent on squeezing orientation. We measure the Allan deviation spectrum of a clock operated with a phase-squeezed input state. For averaging times up to 50 s the squeezed clock achieves a given precision 2.8(3) times faster than a clock operating at the standard quantum limit.

  17. Argon metastable dynamics and lifetimes in a direct current microdischarge

    SciTech Connect

    Stefanovi?, Ilija; Kuschel, Thomas; Schrter, Sandra; Bke, Marc

    2014-09-21

    In this paper we study the properties of a pulsed dc microdischarge with the continuous flow of argon. Argon metastable lifetimes are measured by tunable diode laser absorption spectroscopy (TDLAS) and are compared with calculated values which yield information about excitation and de-excitation processes. By increasing the gas flow-rate about 5 times from 10 to 50 sccm, the Ar{sup m} lifetime increases from 1 to 5 ?s due to the reduction of metastable quenching with gas impurities. Optical emission spectroscopy reveals nitrogen and water molecules as the main gas impurities. The estimated N? density [N?]=0.1% is too low to explain the measured metastable lifetimes. Water impurity was found to be the main de-excitation source of argon metastable atoms due to high quenching coefficients. The water impurity level of [H?O]=0.15% to 1% is sufficient to bring calculated metastable lifetimes in line with experiments. The maximum value of water content in the discharge compared to the argon atoms is estimated to approximately 6%, due to the large surface to volume ratio of the microdischarge. The current pulse releases the water molecules from the electrode surface and they are either re-adsorbed in the time between 0.4 ms for [H?O]=1% and 2.6 ms for [H?O]=0.15% or pumped out of the discharge with the speed equal to the gas flow-rate. Depending on its partial pressure, the water impurity re-adsorption time is of the order of magnitude or less then the argon gas residence time.

  18. Lifetime statistics of quantum chaos studied by a multiscale analysis

    SciTech Connect

    Di Falco, A.; Krauss, T. F. [School of Physics and Astronomy, University of St. Andrews, North Haugh, St. Andrews, KY16 9SS (United Kingdom); Fratalocchi, A. [PRIMALIGHT, Faculty of Electrical Engineering, Applied Mathematics and Computational Science, King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900 (Saudi Arabia)

    2012-04-30

    In a series of pump and probe experiments, we study the lifetime statistics of a quantum chaotic resonator when the number of open channels is greater than one. Our design embeds a stadium billiard into a two dimensional photonic crystal realized on a silicon-on-insulator substrate. We calculate resonances through a multiscale procedure that combines energy landscape analysis and wavelet transforms. Experimental data is found to follow the universal predictions arising from random matrix theory with an excellent level of agreement.

  19. Center for Extended Lifetime Energy Storage Technologies (CELESTE)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Center for Extended Lifetime Energy Storage TEchnologies CELESTE Jim Misewich, Ph.D Esther S. Takeuchi, Ph.D.. Associate Laboratory Director SUNY Distinguished Professor Brookhaven National Laboratory Stony Brook University Messages National Needs for Electrical Energy Storage Transportation needs Grid needs Opportunity $120M DOE Energy Innovation Hub Competition (FOA-0000559) Brookhaven Track Record as Model for Hub GE and utilization of NSLS for Durathon TM Vision for CELESTE Leverage >$1B

  20. Apparatus for measuring minority carrier lifetime using liquid conductor -

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Energy Innovation Portal Industrial Technologies Industrial Technologies Find More Like This Return to Search Apparatus for measuring minority carrier lifetime using liquid conductor National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary Solar power generating capacity has grown from 83 MW in 2003 to over 7,200 MW in 2012, in the U.S. alone. As the solar industry grows, there is a significant need for quality control and testing methodologies.

  1. Predictive Models of Li-ion Battery Lifetime (Presentation)

    SciTech Connect

    Smith, K.; Wood, E.; Santhanagopalan, S.; Kim, G.; Shi, Y.; Pesaran, A.

    2014-09-01

    Predictive models of Li-ion battery reliability must consider a multiplicity of electrochemical, thermal and mechanical degradation modes experienced by batteries in application environments. Complicating matters, Li-ion batteries can experience several path dependent degradation trajectories dependent on storage and cycling history of the application environment. Rates of degradation are controlled by factors such as temperature history, electrochemical operating window, and charge/discharge rate. Lacking accurate models and tests, lifetime uncertainty must be absorbed by overdesign and warranty costs. Degradation models are needed that predict lifetime more accurately and with less test data. Models should also provide engineering feedback for next generation battery designs. This presentation reviews both multi-dimensional physical models and simpler, lumped surrogate models of battery electrochemical and mechanical degradation. Models are compared with cell- and pack-level aging data from commercial Li-ion chemistries. The analysis elucidates the relative importance of electrochemical and mechanical stress-induced degradation mechanisms in real-world operating environments. Opportunities for extending the lifetime of commercial battery systems are explored.

  2. 241-SY-101 mixer pump lifetime expectancy. Final report

    SciTech Connect

    Shaw, C.P.

    1995-12-08

    The purpose of WHC-SD-WM-TI-726, Rev. 0 241-SY-101 Mixer Pump Lifetime Expectancy is to determine a best estimate of the mean lifetime of non-repairable (located in the waste) essential features of the hydrogen mitigation mixer pump presently installed in 101-SY. The estimated mean lifetime is 9.1 years. This report does not demonstrate operation of the entire pump assembly within the Tank Farm ``safety envelope``. It was recognized by the Defense Nuclear Facilities Safety Board (DNFSB) this test pump was not specifically designed for long term service in tank 101-SY. In June 95 the DNFSB visited Hanford and ask the question, ``how long will this test pump last and how will the essential features fail?`` During the 2 day meeting with the DNFSB it was discussed and defined within the meeting just exactly what essential features of the pump must operate. These essential features would allow the pump to operate for the purpose of extending the window for replacement. Operating with only essential features would definitely be outside the operating safety envelope and would require a waiver. There are three essential features: 1. The pump itself (i.e. the impeller and motor) must operate 2. Nozzles and discharges leg must remain unplugged 3. The pump can be re-aimed, new waste targeted, even if manually.

  3. Voluntary Green Building Standards for Public Buildings

    Energy.gov [DOE]

    NOTE: The program described below is a voluntary program that encourages state agencies to consider using green building standard. The State of Alabama does not have mandatory Green Building...

  4. BUILDING 341 Seismic Evaluation

    SciTech Connect

    Halle, J.

    2015-06-15

    The Seismic Evaluation of Building 341 located at Lawrence Livermore National Laboratory in Livermore, California has been completed. The subject building consists of a main building, Increment 1, and two smaller additions; Increments 2 and 3.

  5. Office Buildings: Consumption Tables

    Energy Information Administration (EIA) (indexed site)

    and Type of Office Building Total (trillion Btu) per Building (million Btu) per Square Foot (thousand Btu) Dollars per Million Btu All Office Buildings 1,089 1,475 90.5 16.32...

  6. Building Energy Code

    Energy.gov [DOE]

    In 2006 Iowa enacted H.F. 2361, requiring the State Building Commissioner to adopt energy conservation requirements based on a nationally recognized building energy code. The State Building Code...

  7. Lifetime measurements of C 17 excited states and three-body and...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Lifetime measurements of C 17 excited ... Title: Lifetime measurements of C 17 excited states and three-body and continuum effects ...

  8. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Saver

    Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy...

  9. Types of Lighting in Commercial Buildings - Building Size and...

    Energy Information Administration (EIA) (indexed site)

    commercial buildings. Note: Data are for non-mall buildings. Source: Energy Information Administration, 2003 Commercial Buildings Energy Consumption Survey. Office buildings and...

  10. Building Science-Based Climate Maps - Building America Top Innovation...

    Energy Saver

    Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on ...

  11. Building America Webinar: Saving Energy in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Saving Energy in Multifamily Buildings Building America Webinar: Saving Energy in Multifamily Buildings This webinar introduced the Building America team Partnership for Advanced ...

  12. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top ...

  13. Building Technologies Program Presentation

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Renewable Energy Building Technologies Program Jerry Dion Acting Program Manager Building Technologies Program State Energy Advisory Board Meeting October 17, 2007 The investment in Buildings R&D yielded an ROI of 15:1 from 1978 to 2000 The Buildings Technologies Program researches and Energy Efficiency & deploys new technologies to make homes and Renewable Energy commercial buildings more affordable, energy efficient, and better performing The investment in Buildings R&D yielded an

  14. Buildings Performance Database Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Overview Buildings.energy.gov/BPD BuildingsPerformanceDatabase@ee.doe.gov 2 * The BPD statistically analyzes trends in the energy performance and physical & operational characteristics of real commercial and residential buildings. The Buildings Performance Database 3 Design Principles * The BPD contains actual data on existing buildings - not modeled data or anecdotal evidence. * The BPD enables statistical analysis without revealing information about individual buildings. * The BPD cleanses

  15. Model Building Energy Code

    Energy.gov [DOE]

    The Energy Efficiency Building Performance Standards (EEBPS) are statewide minimum requirements that all new construction and additions to existing buildings must satisfy. Exceptions include...

  16. Building-Level Intensities

    Energy Information Administration (EIA) (indexed site)

    . Electricity Consumption and Expenditure Intensities for Non-Mall Buildings, 2003" ,"Electricity Consumption",,,,,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  17. 2013 News | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... September 3, 2013 Architects and Building Engineers Flock to NREL National ASHRAE and AIA conferences in Denver bring hundreds to NREL's energy-efficient buildings. August 23, 2013 ...

  18. 2016 Better Buildings Summit

    Energy.gov [DOE]

    The Better Buildings Summit is a three-day event featuring more than 100 sessions covering how to improve energy efficiency in buildings, schools, and homes.

  19. Office Buildings - Energy Consumption

    Energy Information Administration (EIA) (indexed site)

    Energy Consumption Office buildings consumed more than 17 percent of the total energy used by the commercial buildings sector (Table 4). At least half of total energy, electricity,...

  20. Office Buildings - Full Report

    Energy Information Administration (EIA) (indexed site)

    administration building Insurance company headquarters building Local insurance agency Social services office Attorney's office Real estate sales office Government office State...

  1. Food Sales Buildings

    Energy Information Administration (EIA) (indexed site)

    Sales Characteristics by Activity... Food Sales Food sales buildings are buildings that are used for retail or wholesale sale of food. Basic Characteristics See also: Equipment |...

  2. Buildings | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    work, live, learn, govern, heal, worship, and play in buildings-and they require enormous energy resources. Related Links Buildings Gateway Retrieved from "http:en.openei.orgw...

  3. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... energy-related information throughout building lifecycle 14 Tracks actual building energy usage Transmit Harmonize Compare HPMXL Residential Audit BUILDINGSYNC Commercial Audit ...

  4. Commercial Buildings Integration (CBI)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... with industry: Better Buildings Alliance, federal and other partners 2. Developing core tools, guides and products * Energy data access and analysis: Commercial Building Asset ...

  5. Building Energy Code

    Energy.gov [DOE]

    The California Building Standards Commission (BSC) is responsible for administering California's building standards adoption, publication, and implementation. Since 1989, the BSC has published tr...

  6. Building Energy Code

    Energy.gov [DOE]

    The Connecticut Office of the State Building Inspector establishes and enforces building, electrical, mechanical, plumbing and energy code requirements by reviewing, developing, adopting and...

  7. Building Energy Code

    Energy.gov [DOE]

    Public Act 093-0936 (Illinois Energy Conservation Code for Commercial Buildings) was signed into law in August, 2004. The Illinois Energy Conservation Code for Commercial Buildings became...

  8. Better Buildings Training Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Training Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.govbbrn 1 T he Better Buildings Residential Network Training Toolkit can be used by ...

  9. NREL: News - New Design Tool Analyzes Cost of Operating a Building Over its

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Lifetime Design Tool Analyzes Cost of Operating a Building Over its Lifetime Golden, Colo., August 2, 2002 Imagine being able to estimate the energy life-cycle costs of a new building by simply entering numbers into a software program. Thanks to the new Energy-10 design tool, this is now possible. The new software - Energy-10 Version 1.5 - is an upgrade to the original program developed at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL). The new Energy-10

  10. Federal Buildings Supplemental Survey -- Overview

    Energy Information Administration (EIA) (indexed site)

    Buildings The Federal Buildings Supplemental Survey 1993 provides building-level energy-related characteristics for a special sample of commercial buildings owned by the...

  11. Health Care Buildings: Equipment Table

    Energy Information Administration (EIA) (indexed site)

    Equipment Table Buildings, Size and Age Data by Equipment Types for Health Care Buildings Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet)...

  12. 1999 CBECS Principal Building Activities

    Energy Information Administration (EIA) (indexed site)

    Data Reports > 2003 Building Characteristics Overview A Look at Building Activities in the 1999 Commercial Buildings Energy Consumption Survey The Commercial Buildings Energy...

  13. Wavelengths and lifetimes of transitions in highly-ionized krypton

    SciTech Connect

    Barry, H.G.; Dunford, R.W.; Gemmel, D.S.

    1995-08-01

    We began a program to test relativistic Hartree-Fock calculations in 3-, 4-, and 5- electron systems by making precision wavelength and lifetime measurements. This is an extension of previous work at ATLAS in which we obtained precision lifetime and wavelength measurements in one- and two-electron systems. We are starting by making accurate wavelength and lifetime measurements of the spectra of multielectron krypton in the far ultraviolet region, at wavelengths of 50 to 400 {Angstrom}. Although there was considerable theoretical progress in this area recently, little accurate data exists for ions above Z=18, except for the wavelengths of the lithium-like transitions. Our spectra are taken using a beam-foil chamber coupled to a 2.2-m McPherson grazing incidence monochromator. This system was upgraded recently to provide efficient light collection and to take advantage of the time structure of ATLAS. The exit slits of the monochromator were replaced by a position-sensitive channel plate with high spatial and time resolution. The channel plate is mounted on a movable chariot on the Rowland circle of the monochromator. The chariot can be translated along the circle, and it can be rotated about a tangent point of the circle. This latter movement allows us to optimize resolution and efficiency depending on the needs of the experiment. Backgrounds due to electrons, neutrons, gamma rays, and dark count from the detector are greatly reduced using a time window (1-2 ns) triggered from the ATLAS beam pulse structure (82 ns pulse separation).

  14. DUST DESTRUCTION RATES AND LIFETIMES IN THE MAGELLANIC CLOUDS

    SciTech Connect

    Temim, Tea; Dwek, Eli; Boyer, Martha L.; Tchernyshyov, Kirill; Meixner, Margaret; Gall, Christa; Roman-Duval, Julia

    2015-02-01

    The dust budget in galaxies depends on the rate at which dust grains are created in different stellar sources and destroyed by interstellar shocks. Because of their extensive wavelength coverage, proximity, and nearly face-on geometry, the Magellanic Clouds (MCs) provide a unique opportunity to study these processes in great detail. In this paper, we use the complete sample of supernova remnants (SNRs) in the MCs to calculate the lifetimes and destruction efficiencies of silicate and carbon dust. We find dust lifetimes of 22 ± 13 Myr (30 ± 17 Myr) for silicate (carbon) grains in the LMC, and 54 ± 32 Myr (72 ± 43 Myr) for silicate (carbon) grains in the SMC. The corresponding dust destruction rates are 2.3 × 10{sup –2} M {sub ☉} yr{sup –1} (5.9 × 10{sup –3} M {sub ☉} yr{sup –1}) and 3.0 × 10{sup –3} M {sub ☉} yr{sup –1} (5.6 × 10{sup –4} M {sub ☉} yr{sup –1}) for silicate (carbon) grains in the LMC and SMC, respectively. The significantly shorter lifetimes in the MCs, as compared to the Milky Way, are explained as the combined effect of their lower total dust mass and preferentially higher dust-to-gas (D2G) mass ratios in the vicinity of the SNRs. We find that the maximum dust injection rates by asymptotic giant branch stars and core collapse supernovae are an order of magnitude lower than the dust destruction rates by the SNRs, suggesting that most of the dust may be reconstituted in dense molecular clouds. We also discuss the dependence of the dust destruction rate on the local D2G mass ratio, ambient gas density, and metallicity, as well as the application of our results to other galaxies and dust evolution models.

  15. The effect of environment on thermal barrier coating lifetime

    DOE PAGES [OSTI]

    Pint, Bruce A.; Unocic, Kinga A.; Haynes, James Allen

    2016-03-15

    While the water vapor content of the combustion gas in natural gas-fired land-based turbines is ~10%, it can be 20–85% with coal-derived (syngas or H2) fuels or innovative turbine concepts for more efficient carbon capture. Additional concepts envisage working fluids with high CO2 contents to facilitate carbon capture and sequestration. To investigate the effects of changes in the gas composition on thermal barrier coating (TBC) lifetime, furnace cycling tests (1-h and 100-h cycles) were performed in air with 10, 50, and 90 vol. % water vapor and CO2-10% H2O and compared to prior results in dry air or O2. Twomore » types of TBCs were investigated: (1) diffusion bond coatings (Pt-diffusion or Pt-modified aluminide) with commercial electron-beam physical vapor-deposited yttria-stabilized zirconia (YSZ) top coatings on second-generation superalloy N5 and N515 substrates and (2) high-velocity oxygen fuel (HVOF) sprayed MCrAlYHfSi bond coatings with air plasma-sprayed YSZ top coatings on superalloys X4, 1483, or 247 substrates. For both types of coatings exposed in 1-h cycles, the addition of water vapor resulted in a decrease in coating lifetime, except for Pt-diffusion coatings which were unaffected by the environment. In 100-h cycles, environment was less critical, perhaps because coating failure was chemical (i.e., due to interdiffusion) rather than mechanical. As a result, in both 1-h and 100-h cycles, CO2 did not appear to have any negative effect on coating lifetime.« less

  16. Determination of the b_s lifetime using hadronic decays

    SciTech Connect

    Deisher, A.J.; /LBL, Berkeley

    2008-07-01

    The authors present a measurement of the B{sub s}{sup 0} meson lifetime using fully and partially reconstructed hadronic decays B{sub s}{sup 0} {yields} D{sub s}{sup -} {pi}{sup +}(X) followed by D{sub s}{sup -} {yields} {phi}{pi}{sup -}. The data sample was recorded with the CDF II detector at the Fermilab Tevatron and corresponds to an integrated luminosity of 1.3 fb{sup -1} from p{bar p} collisions at {radical}s = 1.96 TeV.

  17. B(s) mixing and B hadron lifetimes at CDF

    SciTech Connect

    Milnik, Michael; /Karlsruhe U., EKP

    2007-10-01

    We present the CDF results using 1.0 fb{sup -1} of data on the mixing frequency measurement in the B{sup 0}{sub s} system and the lifetime measurements of several B hadrons. We obtain {Delta}m{sub s} = 17.77 {+-} 0.1 {+-} 0.07 ps{sup -1} and c{tau}({Lambda}{sub b}) = 473.8 {+-} 23.1 {+-}3.5 {micro}m. The later one is more than 3{sigma} above the world average, but in reasonable agreement with HQE calculations.

  18. Positron lifetime spectrometer using a DC positron beam

    DOEpatents

    Xu, Jun; Moxom, Jeremy

    2003-10-21

    An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

  19. Modified clock inequalities and modified black hole lifetime

    SciTech Connect

    Yang Rongjia; Zhang Shuangnan

    2009-06-15

    Based on a generalized uncertainty principle, Salecker-Wigner inequalities are modified. When applied to black holes, they give a modified black hole lifetime: T{sub MB}{approx}(M{sup 3}/m{sub p}{sup 3})(1-m{sub p}{sup 2}/M{sup 2})t{sub p}, and the number of bits required to specify the information content of the black hole as the event horizon area in Planck units N{approx}(M{sup 2}/m{sub p}{sup 2})(1-m{sub p}{sup 2}/M{sup 2})

  20. Cosmological neutrino mass detection: The Best probe of neutrino lifetime

    SciTech Connect

    Serpico, Pasquale D.; /Fermilab

    2007-01-01

    Future cosmological data may be sensitive to the effects of a finite sum of neutrino masses even as small as {approx}0.06 eV, the lower limit guaranteed by neutrino oscillation experiments. We show that a cosmological detection of neutrino mass at that level would improve by many orders of magnitude the existing limits on neutrino lifetime, and as a consequence on neutrino secret interactions with (quasi-)massless particles as in majoron models. On the other hand, neutrino decay may provide a way-out to explain a discrepancy {approx}< 0.1 eV between cosmic neutrino bounds and Lab data.

  1. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation J. Neubauer Technical Report NREL/TP-5400-63246 December 2014 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Contract No. DE-AC36-08GO28308 National Renewable Energy Laboratory 15013 Denver

  2. Better Buildings Neighborhood Program

    Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: Business Models Guide, October 27, 2011.

  3. Events | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Events Below are upcoming events related to buildings research. No current events have been scheduled

  4. Nanocrystal-based Phosphors with Enhanced Lifetime Stability | Department

    Energy.gov [DOE] (indexed site)

    Form used to support nuclear materials accountability and control. NUCLEAR MATERIALTRANSACTION REPORT (15.02 KB) More Documents & Publications DOE/NRC F 742 DOE F 741 DOE F 749

    The data dashboard for NYSERDA, a partner in the Better Buildings Neighborhood Program. NYSERDA Data Dashboard (302.5 KB) More Documents & Publications Austin Energy Data Dashboard Massachusetts -- SEP Data Dashboard Phoenix, Arizona Data Dashboard

    Summary of data reported by Better Buildings

  5. Buildings Energy Data Book

    Buildings Energy Data Book

    Current and Past EditionsGlossaryPopular TablesQuery Tools Contact Us Search What Is the Buildings Energy Data Book? The Data Book includes statistics on residential and commercial building energy consumption. Data tables contain statistics related to construction, building technologies, energy consumption, and building characteristics. The Building Technologies Program within the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy developed this resource to provide a

  6. Buildings Energy Data Book

    Buildings Energy Data Book

    4.1 Federal Buildings Energy Consumption 4.2 Federal Buildings and Facilities Characteristics 4.3 Federal Buildings and Facilities Expenditures 4.4 Legislation Affecting Energy Consumption of Federal Buildings and Facilities 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download

  7. Buildings Energy Data Book

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Type Definition Includes These Sub-Categories from 2003 CBECS Questionnaire Education Buildings used for academic or technical classroom instruction, such as elementary, middle, or high schools, and classroom buildings on college or university campuses. Buildings on education campuses for which the main use is not classroom are included in the category relating to their use. For example, administration buildings are part of "Office", dormitories are "Lodging", and

  8. Apparatus for measuring minority carrier lifetimes in semiconductor materials

    DOEpatents

    Ahrenkiel, R.K.

    1999-07-27

    An apparatus for determining the minority carrier lifetime of a semiconductor sample includes a positioner for moving the sample relative to a coil. The coil is connected to a bridge circuit such that the impedance of one arm of the bridge circuit is varied as sample is positioned relative to the coil. The sample is positioned relative to the coil such that any change in the photoconductance of the sample created by illumination of the sample creates a linearly related change in the input impedance of the bridge circuit. In addition, the apparatus is calibrated to work at a fixed frequency so that the apparatus maintains a consistently high sensitivity and high linearly for samples of different sizes, shapes, and material properties. When a light source illuminates the sample, the impedance of the bridge circuit is altered as excess carriers are generated in the sample, thereby producing a measurable signal indicative of the minority carrier lifetimes or recombination rates of the sample. 17 figs.

  9. Building Green in Greensburg: City Hall Building

    Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing City Hall building in Greensburg, Kansas.

  10. 1999 Commercial Buildings Characteristics--Principal Building...

    Energy Information Administration (EIA) (indexed site)

    contact the National Energy Information Center at (202) 586-8800. Energy Information Administration Commercial Buildings Energy Consumption Survey Differences between the...

  11. Buildings Technology Office Residential Buildings Integration...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Summaries Building America, ARIES: High Performance Factory Built Housing Presenter: Jordan Dentz, ARIESThe Levy Partnership Project Goal Provide factory homebuilders with high ...

  12. Building Green in Greensburg: Business Incubator Building

    Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing SunChips Business Incubator building in Greensburg, Kansas.

  13. Green Building Certification Systems Requirement for New Federal Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Major Renovations of Federal Buildings Final Rule | Department of Energy Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings Final Rule Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings Final Rule Document details the Green Building Certification Systems Requirement for New Federal Buildings and Major Renovations of Federal Buildings' Final Rule for 10 CFR

  14. Buildings","Heated Buildings",,"Cooled Buildings",,"Lit Buildingsc...

    Energy Information Administration (EIA) (indexed site)

    ...73,858,953,772,989,865 "Building Shell Conservation" "Features (more than one" "may ...77,25703,28721,22459,29583,26485 "HVAC Conservation Features" "(more than one may apply)" ...

  15. Joseph Vance Building, The

    Building Catalog

    Seattle, WA In 2006, the Rose Smart Growth Investment Fund acquired the historic Joseph Vance Building with the purpose of transforming it into "the leading green and historic class B" building in the marketplace. The terra cotta Vance Building was constructed in 1929 and has 14 floors - 13 floors of offices over ground-floor retail with a basement for mechanical equipment and storage. In 2009 the U.S. Green Building Council (USGBC) awarded the Vance Building LEED for Existing Buildings (EB) Gold certification. 05/13/2015 - 12:23

  16. Buildings Energy Data Book: 5.2 Windows

    Buildings Energy Data Book

    7 Nonresidential Window Stock and Sales, by Glass Type Existing U.S. Stock Vision Area of New Windows (Million Square Feet) Type (% of buildings) 1995 2001 2003 2005 2007 2009 Single Pane 56 57 48 56 60 48 Insulating Glass (1) 294 415 373 407 476 389 Total 350 472 421 463 536 437 Clear 36% 49% 43% 44% 38% 33% Tinted 40% 24% 17% 15% 11% 10% Reflective 7% 8% 6% 4% 3% 3% Low-e 17% 19% 34% 37% 48% 54% Total 100% 100% 100% 100% 100% 100% 100% Note(s): Source(s): (2) 1) Includes double- and

  17. BSC: Building America, Building Science Consortium - 2015 Peer Review |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy BSC: Building America, Building Science Consortium - 2015 Peer Review BSC: Building America, Building Science Consortium - 2015 Peer Review Presenter: Joe Lstiburek, Building Science Corp. View the Presentation BSC: Building America, Building Science Consortium - 2015 Peer Review (1.5 MB) More Documents & Publications Building America Technology Solutions for New and Existing Homes Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles Building

  18. Food Service Buildings

    Energy Information Administration (EIA) (indexed site)

    was a food service building were only asked whether the building was a restaurant, bar, fast food chain, or cafeteria (all the same category) or some other type of food service...

  19. 325 Building - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Area 324 Building 325 Building 400 AreaFast Flux Test Facility 618-10 and 618-11 ... Facilities Cold Test Facility D and DR Reactors Effluent Treatment Facility ...

  20. 324 Building - Hanford Site

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Area 324 Building 325 Building 400 AreaFast Flux Test Facility 618-10 and 618-11 ... Facilities Cold Test Facility D and DR Reactors Effluent Treatment Facility ...

  1. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  2. Building Energy Code

    Energy.gov [DOE]

    Missouri does not have a statewide building or energy code for private residential and commercial buildings, and there currently is no state regulatory agency authorized to promulgate, adopt, or...

  3. Buildings interoperability landscape - Draft

    SciTech Connect

    Hardin, Dave B.; Stephan, Eric G.; Wang, Weimin; Corbin, Charles D.; Widergren, Steven E.

    2015-02-01

    Buildings are an integral part of our nation’s energy economy. The advancement in information and communications technology (ICT) has revolutionized energy management in industrial facilities and large commercial buildings. As ICT costs decrease and capabilities increase, buildings automation and energy management features are transforming the small-medium commercial and residential buildings sectors. A vision of a connected world in which equipment and systems within buildings coordinate with each other to efficiently meet their owners’ and occupants’ needs, and where buildings regularly transact business with other buildings and service providers (such as gas and electric service providers) is emerging. However, while the technology to support this collaboration has been demonstrated at various degrees of maturity, the integration frameworks and ecosystems of products that support the ability to easily install, maintain, and evolve building systems and their equipment components are struggling to nurture the fledging business propositions of their proponents.

  4. Building Energy Code

    Energy.gov [DOE]

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  5. Building Materials Property Table

    SciTech Connect

    2010-04-16

    This information sheet describes a table of some of the key technical properties of many of the most common building materials taken from ASHRAE Fundamentals - 2001, Moisture Control in Buildings, CMHC, NRC/IRC, IEA Annex 24, and manufacturer data.

  6. Special Building Renovations

    Energy.gov [DOE]

    A number of building types have specific energy uses and needs, and as such the renewable opportunities may be different from a typical office building. This section briefly discusses the following...

  7. Building Design & Construction - Sustainability

    SciTech Connect

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  8. 2015 Better Buildings Summit

    Energy.gov [DOE]

    The U.S. Department of Energy's Better Buildings Summit is a national meeting where leading organizations across key sectors showcase solutions to cut energy intensity in their buildings portfolio...

  9. Grid-Responsive Buildings

    Energy.gov [DOE]

    The U.S.-India Joint Center for Building Energy Research and Development (CBERD) conducts energy efficiency research and development with a focus on integrating information technology with building controls and physical systems for commercial/high-rise residential units.

  10. Chapter 3: Building Siting

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Los Alamos National Laboratory Sustainable Design Guide 35 This aerial photo of portions ... LANL Chapter 3 | Building Siting To promote sustainable land use, it is better to build on ...

  11. Building Energy Code

    Energy.gov [DOE]

    The Kentucky Building Code (KBC) is updated every three years on a cycle one year behind the publication year for the International Building Code. Any changes to the code by the state of Kentucky...

  12. Building Energy Code

    Energy.gov [DOE]

    Prior to 1997, South Carolina's local governments adopted and enforced the building codes. In 1997, the law required statewide use of the most up-to-date building codes, which then required the...

  13. Building Energy Code

    Energy.gov [DOE]

    The Florida Building Commission (FBC) is directed to adopt, revise, update, and maintain the Florida Building Code in accordance with Chapter 120 of the state statutes. The code is mandatory...

  14. Building Energy Code

    Energy.gov [DOE]

    The Board of Building Standards is the primary state agency that protects the public's safety by: adopting rules governing the construction, repair, and rehabilitation of buildings in the state;...

  15. Building Energy Code

    Energy.gov [DOE]

    The Massachusetts Board of Building Regulations and Standards has authority to promulgate the Massachusetts State Building Code (MSBC). The energy provisions in the MSBC were developed by the Boa...

  16. Building Energy Code

    Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more deta...

  17. Building Energy Code

    Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  18. Building Energy Code

    Energy.gov [DOE]

    The Virginia Uniform Statewide Building Code (USBC) is a statewide minimum requirement that local jurisdictions cannot amend. The code is applicable to all new buildings in the commonwealth. The...

  19. Guam- Building Energy Code

    Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  20. Building Energy Code

    Energy.gov [DOE]

    The 2012 IECC is in effect for all residential and commercial buildings, Idaho schools, and Idaho jurisdictions that adopt and enforce building codes, unless a local code exists that is more...

  1. Health Care Buildings

    Energy Information Administration (EIA) (indexed site)

    also tended to be larger than those not on complexes. The average building on a complex was 79.9 thousand square feet, compared to 11.2 thousand square feet for buildings...

  2. Better Buildings Summit 2015

    Energy.gov [DOE]

    The Better Buildings Summit is a national meeting where Better Buildings partners, including AMO’s Better Plants Program partners, and leading organizations can exchange best practices and showcase...

  3. Measurements of aperture and beam lifetime using movable beam scrapers in Indus-2 electron storage ring

    SciTech Connect

    Kumar, Pradeep; Ghodke, A. D.; Karnewar, A. K.; Holikatti, A. C.; Yadav, S.; Puntambekar, T. A.; Singh, G.; Singh, P.

    2013-12-15

    In this paper, the measurements of vertical and horizontal aperture which are available for stable beam motion in Indus-2 at beam energy 2.5 GeV using movable beam scrapers are presented. These beam scrapers are installed in one of the long straight sections in the ring. With the movement of beam scrapers towards the beam centre, the beam lifetime is measured. The beam lifetime data obtained from the movement of vertical and horizontal beam scrapers are analyzed. The contribution of beam loss due to beam-gas scattering (vacuum lifetime) and electron-electron scattering within a beam bunch (Touschek lifetime) is separated from the measured beam lifetime at different positions of the beam scrapers. Vertical and horizontal beam sizes at scrapers location are estimated from the scraper movement towards the beam centre in quantum lifetime limit and their values closely agree with measured value obtained using X-ray diagnostic beamline.

  4. 1999 Commercial Buildings Characteristics--Building Shell and...

    Energy Information Administration (EIA) (indexed site)

    & Practices > Building Shell & Lighting Conservation Features Building Shell and Lighting Conservation Features The 1999 CBECS collected information on two types of building shell...

  5. Building America Top Innovations 2013 Profile - Building America...

    Energy Saver

    Building America Top Innovations 2013 Profile - Building America Solution Center PNNL set up the framework for the Building America Solution Center, a web tool connecting users to ...

  6. Trends in Commercial Buildings--Buildings and Floorspace

    Energy Information Administration (EIA) (indexed site)

    activity. Number of Commercial Buildings In 1979, the Nonresidential Buildings Energy Consumption Survey estimated that there were 3.8 million commercial buildings in the...

  7. Building America Webinar: Building America Technology-to-Market...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Technology-to-Market Roadmaps Building America Webinar: Building America Technology-to-Market Roadmaps This webinar introduced the integrated Building America Technology-to-Market ...

  8. Building America Solution Center - Building America Top Innovation...

    Energy Saver

    Building America Solution Center - Building America Top Innovation SCimagemale.jpg The Building America Solution Center is a Web-based tool connecting users to fast, free, and ...

  9. Energy Savings Modeling of Standard Commercial Building Re-tuning Measures: Large Office Buildings

    SciTech Connect

    Fernandez, Nicholas; Katipamula, Srinivas; Wang, Weimin; Huang, Yunzhi; Liu, Guopeng

    2012-06-01

    Today, many large commercial buildings use sophisticated building automation systems (BASs) to manage a wide range of building equipment. While the capabilities of BASs have increased over time, many buildings still do not fully use the BAS's capabilities and are not properly commissioned, operated or maintained, which leads to inefficient operation, increased energy use, and reduced lifetimes of the equipment. This report investigates the energy savings potential of several common HVAC system retuning measures on a typical large office building prototype model, using the Department of Energy's building energy modeling software, EnergyPlus. The baseline prototype model uses roughly as much energy as an average large office building in existing building stock, but does not utilize any re-tuning measures. Individual re-tuning measures simulated against this baseline include automatic schedule adjustments, damper minimum flow adjustments, thermostat adjustments, as well as dynamic resets (set points that change continuously with building and/or outdoor conditions) to static pressure, supply air temperature, condenser water temperature, chilled and hot water temperature, and chilled and hot water differential pressure set points. Six combinations of these individual measures have been formulated - each designed to conform to limitations to implementation of certain individual measures that might exist in typical buildings. All of these measures and combinations were simulated in 16 cities representative of specific U.S. climate zones. The modeling results suggest that the most effective energy savings measures are those that affect the demand-side of the building (air-systems and schedules). Many of the demand-side individual measures were capable of reducing annual HVAC system energy consumption by over 20% in most cities that were modeled. Supply side measures affecting HVAC plant conditions were only modestly successful (less than 5% annual HVAC energy savings for

  10. High Performance Sustainable Buildings

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Buildings Goal 3: High Performance Sustainable Buildings Maintaining the conditions of a building improves the health of not only the surrounding ecosystems, but also the well-being of its occupants. Energy Conservation» Efficient Water Use & Management» High Performance Sustainable Buildings» Greening Transportation» Green Purchasing & Green Technology» Pollution Prevention» Science Serving Sustainability» ENVIRONMENTAL SUSTAINABILITY GOALS at LANL The Radiological Laboratory

  11. Better Buildings, Better Plants:

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Buildings, Better Plants: AMO Technical Assistance Overview Andre de Fontaine This presentation does not contain any proprietary, confidential, or otherwise restricted information. 2 | Advanced Manufacturing Office Better Buildings, Better Plants Overview  Better Buildings, Better Plants is a national, voluntary industrial energy efficiency leadership initiative.  It is a key component of the President's Better Buildings Initiative, which seeks to improve the energy efficiency of

  12. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    In March 2006, SB 459 was enacted to promote renewable energy and update the state's building energy codes.

  13. Publications | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Publications NREL publishes a variety of documents related to its research, including technical reports, brochures, and presentations. Read the information below to find out how to find a publication about buildings research at NREL. Accessing Research Papers Buildings Technical Highlights Research Papers - Commercial Research Papers - Residential Accessing Buildings Research Documents Documents produced by NREL related to buildings technologies may be accessed online in several different ways.

  14. Buildings Energy Data Book

    Buildings Energy Data Book

    1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy

  15. Buildings Energy Data Book

    Buildings Energy Data Book

    The Energy Index for Commercial Buildings Welcome to the Energy Index for Commercial Buildings. Data for this tool comes from the Energy Information Administration's (EIA) 2003 Commercial Buildings Energy Consumption Survey (CBECS). Select categories from the CBECS micro data allow users to search on common building characteristics that impact energy use. Users may select multiple criteria, however if the resulting sample size is too small, the data will be unreliable. If nothing is selected

  16. Buildings Energy Databook

    Buildings Energy Data Book

    2 BUILDINGS ENERGY DATABOOK U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY AND RENEWABLE ENERGY DOE's Office of Energy Efficiency and Renewable Energy Buildings Energy Databook The United States Department of Energy's Office of Energy Efficiency and Renewable Energy has developed this Buildings Energy Databook to provide a current and accurate set of comprehensive buildings-related data and to promote the use of such data for consistency throughout DOE programs. The Databook is considered

  17. Residential Buildings Integration (RBI)

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Energy Efficiency and Renewable Energy eere.energy.gov David Lee Program Manager Residential Buildings Integration (RBI) April 22, 2014 Residential Buildings Integration (RBI) Mission/Vision The Residential Buildings Integration (RBI) program's mission: To accelerate energy performance improvements in residential buildings by developing, demonstrating, and deploying a suite of cost-effective technologies, tools, and solutions to achieve peak performance in new and existing homes. RBI Vision,

  18. Kiowa County Commons Building

    Energy.gov [DOE]

    This poster describes the energy efficiency features and sustainable materials used in the Kiowa County Commons Building in Greensburg, Kansas.

  19. Ventilation in Multifamily Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program www.buildingamerica.gov Buildings Technologies Program Date: November 1, 2011 Ventilation in Multifamily Buildings Welcome to the Webinar! We will start at 2:00 PM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-324-9601; Pass code: 5551971 Download the presentation at: www.buildingamerica.gov/meetings.html Building Technologies Program eere.energy.gov Building America: Introduction November 1, 2011 Cheryn Engebrecht

  20. Radiative Lifetimes of Zincblende CdSe/CdS Quantum Dots

    Office of Scientific and Technical Information (OSTI)

    Radiative lifetimes can also be obtained from the Einstein relations, using the static ... to values obtained from the Einstein relations, and found to be in excellent agreement. ...

  1. Radiative lifetimes of zincblende CdSe/CdS quantum dots (Journal...

    Office of Scientific and Technical Information (OSTI)

    Radiative lifetimes can also be obtained from the Einstein relations, using the static ... to values obtained from the Einstein relations, and found to be in excellent agreement. ...

  2. Better Buildings Webinar: Better Buildings Alliance - Annual...

    Energy.gov [DOE] (indexed site)

    5 2:00PM to 3:00PM EDT Online The Better Buildings Alliance is hosting a webinar on new energy efficiency resources and upcoming opportunities available this year through DOE's...

  3. Federal Buildings Supplemental Survey 1993

    Energy Information Administration (EIA) (indexed site)

    4. Energy Conservation Features in FBSS Building in Federal Region 3, Number of Buildings and Floorspace, 1993 Total Floorspace Number of Buildings (thousand square feet) Any Any...

  4. Principal Building Activities--1995 CBECS

    Energy Information Administration (EIA) (indexed site)

    Detailed Tables > Principal Building Activities Table Number of Buildings, Total Floorspace, and Total Site and Primary Energy Consumption for All Principal Building Activities,...

  5. Buildings | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    Buildings > Posts by term Content Group Activity By term Q & A Feeds ancient building system (1) architect (1) biomimicry (1) building technology (1) cooling (1) cu (1) daylight...

  6. Health Care Buildings: Subcategories Table

    Energy Information Administration (EIA) (indexed site)

    Subcategories Table Selected Data by Type of Health Care Building Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet) Percent of Floorspace Square...

  7. Honest Buildings | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Website: www.honestbuildings.com Web Application Link: www.honestbuildings.com Cost: Free Honest Buildings Screenshot References: Honest Buildings1 Logo: Honest Buildings...

  8. Metal Buildings M&V

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Reference Slides A&S Building Systems American Buildings Architectural Testing Atlas Bolt & Screw Behlen Manufacturing Butler Manufacturing Building Research Systems Kirby ...

  9. Funding Opportunity Webinar - Buildings University Innovators...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Buildings University Innovators and Leaders Development (BUILD) Funding Opportunity Webinar - Buildings University Innovators and Leaders Development (BUILD) View the Funding ...

  10. Better Buildings Residential Network | Department of Energy

    Energy Saver

    Residential Buildings Better Buildings Residential Network Better Buildings Residential Network Better Buildings Residential Network Explore Latest Peer Exchange Call Summaries ...

  11. Challenges in Commercial Buildings | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Challenges in Commercial Buildings Whether your focus is new construction or existing facilities, renewable resources or energy efficiency, the National Renewable Energy Laboratory (NREL) Commercial Buildings research team has the tools, resources, and expertise to address your challenges. NREL can help you: Provide reliable and secure energy for your operations Achieve your mandated or internal energy performance targets Meet your organizational objectives while maximizing return on investment.

  12. Passive solar buildings

    SciTech Connect

    Balcomb, J.D.

    1992-10-01

    Developments in passive solar buildings that took place from the early 1970`s through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  13. Passive solar buildings

    SciTech Connect

    Balcomb, J.D. )

    1992-01-01

    Developments in passive solar buildings that took place from the early 1970's through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  14. LIFETIME PREDICTION FOR MODEL 9975 O-RINGS IN KAMS

    SciTech Connect

    Hoffman, E.; Skidmore, E.

    2009-11-24

    The Savannah River Site (SRS) is currently storing plutonium materials in the K-Area Materials Storage (KAMS) facility. The materials are packaged per the DOE 3013 Standard and transported and stored in KAMS in Model 9975 shipping packages, which include double containment vessels sealed with dual O-rings made of Parker Seals compound V0835-75 (based on Viton{reg_sign} GLT). The outer O-ring of each containment vessel is credited for leaktight containment per ANSI N14.5. O-ring service life depends on many factors, including the failure criterion, environmental conditions, overall design, fabrication quality and assembly practices. A preliminary life prediction model has been developed for the V0835-75 O-rings in KAMS. The conservative model is based primarily on long-term compression stress relaxation (CSR) experiments and Arrhenius accelerated-aging methodology. For model development purposes, seal lifetime is defined as a 90% loss of measurable sealing force. Thus far, CSR experiments have only reached this target level of degradation at temperatures {ge} 300 F. At lower temperatures, relaxation values are more tolerable. Using time-temperature superposition principles, the conservative model predicts a service life of approximately 20-25 years at a constant seal temperature of 175 F. This represents a maximum payload package at a constant ambient temperature of 104 F, the highest recorded in KAMS to date. This is considered a highly conservative value as such ambient temperatures are only reached on occasion and for short durations. The presence of fiberboard in the package minimizes the impact of such temperature swings, with many hours to several days required for seal temperatures to respond proportionately. At 85 F ambient, a more realistic but still conservative value, bounding seal temperatures are reduced to {approx}158 F, with an estimated seal lifetime of {approx}35-45 years. The actual service life for O-rings in a maximum wattage package likely lies

  15. Archive Reference Buildings by Building Type: Fast food

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  16. Archive Reference Buildings by Building Type: Primary school

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  17. DOE Announces Webinars on Buildings of the Future, Building America...

    Office of Environmental Management (EM)

    Buildings of the Future, Building America Research Tools, and More DOE Announces Webinars on Buildings of the Future, Building America Research Tools, and More March 12, 2015 - 8:37am ...

  18. Archive Reference Buildings by Building Type: Secondary school

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  19. Archive Reference Buildings by Building Type: Stand-alone retail

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  20. Archive Reference Buildings by Building Type: Small office

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  1. Archive Reference Buildings by Building Type: Strip mall

    Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  2. Commercial Buildings Characteristics, 1992

    SciTech Connect

    Not Available

    1994-04-29

    Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

  3. Operations building | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Operations building Operations building Chemical recycling columns in an operations building

  4. Building America Whole-House Solutions for Existing Homes: Evaluation of a

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Multifamily Retrofit | Department of Energy a Multifamily Retrofit Building America Whole-House Solutions for Existing Homes: Evaluation of a Multifamily Retrofit A 37-unit apartment complex underwent multiple energy retrofit measures, including attic and wall insulation, low-e windows, and energy-efficient appliances, to comply with the Boulder SmartRegs Ordinance. Evaluation of a Multifamily Retrofit in Climate Zone 5 - Boulder, Colorado (765.88 KB) More Documents & Publications

  5. Building Technologies Office 2015 Highlights

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... worked to validate the energy savings from low-e coatings. ... and voted on by the R&D community and general public. ... Jason received his Ph.D. in public policy from George Mason ...

  6. Building America Webinar: Ventilation in Multifamily Buildings | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Ventilation in Multifamily Buildings Building America Webinar: Ventilation in Multifamily Buildings This webinar was presented by research team Consortium for Advanced Residential Buildings (CARB), and discussed ventilation strategies for multifamily buildings, including how to successfully implement those strategies through smart design, specification, and construction techniques. webinar_ventilation_multifamily_20111101.wmv (22.17 MB) More Documents & Publications Building

  7. Lifetime survivability of contaminated target-chamber optics

    SciTech Connect

    Rainer, F.; Anderson, A.; Burnham, A.; Milam, D.; Turner, R.

    1996-11-01

    Target chambers used for Inertial Confinement Fusion (ICF) expose laser optics to a very hostile environment, not only from high-fluence laser irradiation but also x-ray irradiation and particulate debris from targets and chamber wall materials. Expendable debris shields provide the first line of defense to more costly optics upstream in the laser beam path to contaminants generated within the target chamber. However, the replacement of a large number of debris shields is also an expensive proposition so that extending their usable lifetime within the chamber is important. We have conducted tests to show that optics can both be cleaned and damaged by laser irradiation at 355 nm after being contaminated with potential chamber-wall materials such as B{sub 4}C and Al{sub 2}O{sub 3}. Such optics can survive from one to hundreds of laser shots, depending on degree of contamination and laser fluence levels. Similarly, we have studied the survivability of optics that have been exposed to direct contamination from representative target materials irradiated in the target chamber. We have also studied the effects on optics that were not directly exposed to targets, yet received secondary exposure from the above directly-exposed samples.

  8. Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

    SciTech Connect

    Neubauer, J.

    2014-12-01

    The deployment and use of lithium-ion batteries in automotive and stationary energy storage applications must be optimized to justify their high up-front costs. Given that batteries degrade with use and storage, such optimizations must evaluate many years of operation. As the degradation mechanisms are sensitive to temperature, state-of-charge histories, current levels, and cycle depth and frequency, it is important to model both the battery and the application to a high level of detail to ensure battery response is accurately predicted. To address these issues, the National Renewable Energy Laboratory has developed the Battery Lifetime Analysis and Simulation Tool (BLAST) suite of tools. This suite of tools pairs NREL's high-fidelity battery degradation model with a battery electrical and thermal performance model, application-specific electrical and thermal performance models of the larger system (e.g., an electric vehicle), application-specific system use data (e.g., vehicle travel patterns and driving data), and historic climate data from cities across the United States. This provides highly realistic, long-term predictions of battery response and thereby enables quantitative comparisons of varied battery use strategies.

  9. Lifetime measurements in {sup 63}Co and {sup 65}Co

    SciTech Connect

    Dijon, A.; Clement, E.; France, G. de; Van Isacker, P.; Rejmund, M.; Schmitt, C.; Goergen, A.; Obertelli, A.; Korten, W.; Dewald, A.; Hackstein, M.; Pissulla, Th.; Rother, W.; Zell, K. O.; Gadea, A.; Gaudefroy, L.; Mengoni, D.; Recchia, F.; Sahin, E.

    2011-06-15

    Lifetimes of the 9/2{sub 1}{sup -} and 3/2{sub 1}{sup -} states in {sup 63}Co and the 9/2{sub 1}{sup -} state in {sup 65}Co were measured using the recoil distance Doppler shift and the differential decay curve methods. The nuclei were populated by multinucleon transfer reactions in inverse kinematics. {gamma} rays were measured with the EXOGAM Ge array and the recoiling fragments were fully identified using the large-acceptance VAMOS spectrometer. The E2 transition probabilities from the 3/2{sub 1}{sup -} and 9/2{sub 1}{sup -} states to the 7/2{sup -} ground state could be extracted in {sup 63}Co as well as an upper limit for the 9/2{sub 1}{sup -}{yields}7/2{sub 1}{sup -} B(E2) value in {sup 65}Co. The experimental results were compared to large-scale shell-model calculations in the pf and pfg{sub 9/2} model spaces, allowing us to draw conclusions on the single-particle or collective nature of the various states.

  10. Small inner companions of warm Jupiters: Lifetimes and legacies

    SciTech Connect

    Van Laerhoven, Christa; Greenberg, Richard

    2013-12-01

    Although warm Jupiters are generally too far from their stars for tides to be important, the presence of an inner planetary companion to a warm Jupiter can result in tidal evolution of the system. Insight into the process and its effects comes form classical secular theory of planetary perturbations. The lifetime of the inner planet may be shorter than the age of the system, because the warm Jupiter maintains its eccentricity and hence promotes tidal migration into the star. Thus a warm Jupiter observed to be alone in its system might have previously cleared away any interior planets. Before its demise, even if an inner planet is of terrestrial scale, it may promote damping of the warm Jupiter's eccentricity. Thus any inferences of the initial orbit of an observed warm Jupiter must include the possibility of a greater initial eccentricity than would be estimated by assuming it had always been alone. Tidal evolution involving multiple planets also enhances the internal heating of the planets, which readily exceeds that of stellar radiation for the inner planet, and may be great enough to affect the internal structure of warm Jupiters. Secular theory gives insight into the tidal processes, providing, among other things, a way to constrain eccentricities of transiting planets based on estimates of the tidal parameter Q.

  11. Building Your Message Map Worksheet

    Energy.gov [DOE]

    Building Your Message Map Worksheet, as posted on the U.S. Department of Energy's Better Buildings Neighborhood Program website.

  12. Commercial Building Asset Rating Program

    Energy.gov [DOE]

    Slides from a Commercial Building Initiative webinar outlining the Commercial Building Asset Rating Program on August 23, 2011.

  13. Neutron damage in reactor pressure-vessel steel examined with positron annihilation lifetime spectroscopy

    SciTech Connect

    Cumblidge, S.E.; Motta, A.T.; Catchen, G.L.

    1997-11-01

    The authors have used positron annihilation lifetime spectroscopy to study the development of damage and annealing behavior of neutron-irradiated reactor pressure-vessel steels. They irradiated samples of ASTM A508 nuclear reactor pressure-vessel steel to fast neutron fluences of up to 10{sup 17} n/cm{sup 2}, and they examined these samples using positron annihilation lifetime spectroscopy (PALS) to study the effects of neutron damage in the steels on positron lifetimes. Non-irradiated samples show two positron lifetimes: a 110 ps component corresponding to annihilations in the bulk material, and a 165 ps lifetime corresponding to annihilations in dislocation defects. The irradiated samples show an additional lifetime component of 300 ps in the PAl spectra and an increase in the proportion of annihilations with a 165 ps lifetime, suggesting that vacancies and vacancy clusters are present in the material after room temperature irradiation. The samples were then annealed to temperatures ranging from 210 C to 450 C. The positron lifetimes introduced by neutron damage disappear after annealing the samples at 280 C.

  14. Environment and the Lifetime of Tropical Deep Convection in a Cloud-Permitting Regional Model Simulation

    SciTech Connect

    Hagos, Samson M.; Feng, Zhe; McFarlane, Sally A.; Leung, Lai-Yung R.

    2013-08-01

    By applying a cloud tracking algorithm to tropical convective systems simulated by a regional high resolution model, the study documents environmental conditions before and after convective systems are initiated over ocean and land by following them during their lifetime. The comparative roles of various environmental fields in affecting the lifetime of convection are also quantified. The statistics of lifetime, maximum area, propagation speed and direction of the simulated deep convection agrees well with geostationary satellite observations. Over ocean, convective systems enhance surface fluxes through the associated wind gusts as well as cooling and drying of the boundary layer. A significant relationship is found between the mean surface fluxes during their lifetime and the longevity of the systems which in turn is related to the initial intensity of the moist updraft and to a lesser extent upper level shear. Over land, on the other hand, convective activity suppresses surface fluxes through cloud cover and the lifetime of convection is related to the upper level shear during their lifetime and strength of the heat fluxes several hours before the initiation of convection. For systems of equal lifetime, those over land are significantly more intense than those over ocean especially during early stages of their lifetime.

  15. buildings technology | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    technology Home Buildings Description: This group is dedicated to discussions about green buildings, energy use in buildings, occupant comfort in buildings, and building...

  16. building reviews | OpenEI Community

    OpenEI (Open Energy Information) [EERE & EIA]

    reviews Home Buildings Description: This group is dedicated to discussions about green buildings, energy use in buildings, occupant comfort in buildings, and building...

  17. The Building Design Advisor

    SciTech Connect

    Papamichael, K.; LaPorta, J.; Chauvet, H.; Collins, D.; Trzcinski, T.; Thorpe, J.; Selkowitz, S.

    1996-03-01

    The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA.

  18. Inequivalence of single-particle and population lifetimes in a cuprate superconductor

    SciTech Connect

    Yang, Shuolong; Sobota, J. A.; Leuenberger, D.; He, Y.; Hashimoto, M.; Lu, D. H.; Eisaki, H.; Kirchmann, P. S.; Shen, Z. -X.

    2015-06-15

    We study optimally doped Bi-2212 (Tc=96 K) using femtosecond time- and angle-resolved photoelectron spectroscopy. Energy-resolved population lifetimes are extracted and compared with single-particle lifetimes measured by equilibrium photoemission. The population lifetimes deviate from the single-particle lifetimes in the low excitation limit by 1–2 orders of magnitude. Fundamental considerations of electron scattering unveil that these two lifetimes are in general distinct, yet for systems with only electron-phonon scattering they should converge in the low-temperature, low-fluence limit. As a result, the qualitative disparity in our data, even in this limit, suggests that scattering channels beyond electron-phonon interactions play a significant role in the electron dynamics of cuprate superconductors.

  19. Buildings Performance Database

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    DOE Buildings Performance Database Paul Mathew Lawrence Berkeley National Laboratory pamathew@lbl.gov (510) 486 5116 April 3, 2013 Standard Data Spec API 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: * Large-scale high-quality empirical data on building energy performance is critical to support decision- making and increase confidence in energy efficiency investments. * While there are a many potential sources for such data, they: - are dispersed

  20. BUILDING AMERICA PROGRAM EVALUATION

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BUILDING AMERICA PROGRAM EVALUATION _______________________________ Volume II: Appendices Prepared by: Energy Technology Innovation Project (ETIP) Kennedy School of Government, Harvard University Vicki Norberg-Bohm, Principal Investigator Chad White, Lead Author September 2004 Appendix A. Building America Program Intent and Scope 1 Appendix A-1. Program Overview A-1.1. Program History Building America has its origins in a 1993 pilot project between DOE and a housing products unit at General

  1. 2012 News | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2 News Below are news stories related to Buildings. RSS Learn about RSS. November 20, 2012 NREL's Research Support Facility Garners Second LEED® Platinum The Research Support Facility (RSF) on the campus of the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) in Golden, Colo. has earned its second LEED® Platinum designation for new construction from the U.S. Green Building Council (USGBC), a non-profit organization dedicated to sustainable building design and

  2. Buildings Energy Data Book

    Buildings Energy Data Book

    8.1 Buildings Sector Water Consumption 8.2 Residential Sector Water Consumption 8.3 Commercial Sector Water Consumption 8.4 WaterSense 8.5 Federal Government Water Usage 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables This chapter includes data on water use in commercial and residential buildings and the energy

  3. Buildings Energy Data Book

    Buildings Energy Data Book

    Explore Survey Data from the Energy Information Administration Follow the links below to two easy-to-use query tools, developed exclusively for this website. With these tools you can explore results from the Commercial Buildings Energy Consumption Survey (CBECS) and the Residential Energy Consumption Survey (RECS). Commercial Buildings Energy Index Use this custom query tool to analyze micro data from CBECS 2003. Residential Buildings Energy Index Use this custom Microsoft Excel pivot table to

  4. Ryerson Building Science

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ryerson Building Science Ø-Zone Residence Project Summary Ø - ZONE is a sustainable approach to infill housing in underutilized urban settings Constrained by buildings to the East and West, the 4 story multi-unit residential building uses the principles of passive design to improve indoor comfort and lower the ecological footprint. The design utilizes thermal mass, passively reducing energy demand and improving indoor comfort. Active strategies supplement this to offset the energy cost by

  5. Integrative Genomics Building

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Integrative Genomics Building Community Environmental Documents Tours Community Programs Friends of Berkeley Lab ⇒ Navigate Section Community Environmental Documents Tours Community Programs Friends of Berkeley Lab Project Description The Integrative Genomics Building (IGB) is proposed to be an approximately 77,000 gsf, four-story research and office building constructed in the former Bevatron area - a fully developed site in the geographic interior of the Berkeley Lab. The IGB is intended to

  6. The Lovejoy Building

    Building Catalog

    Portland, Oregon Originally built in 1910 as the stables for the Marshall-Wells Hardware Company, the Lovejoy Building is the home of Opsis Architects. The owner/architects purchased and renovated the historic building to house their growing business and to provide ground-floor office lease space and second-floor offices for their firm. Opsis wanted to use the building to experience and demonstrate the technologies and practices it promotes with clients. 07/08/2015 - 10:09

  7. Building Energy Asset Score

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... building user base in EE services, engineering, design, and ... before expanding use types. * Invest in lateral ... Market Impact and Recognition: 21 organizations committed to ...

  8. Residential Building Activities

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Department of Energy (DOE) is leading several different activities to develop, demonstrate, and deploy cost-effective solutions to reduce energy consumption across the residential building...

  9. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  10. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...

  11. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    (CEC), March 1990. Advanced Lighting Technologies Application Guidelines (ALTAG), Building and Appliance Efficiency Office. 3. Dubin, F.S., Mindell, H.L., and Bloome, S., 1976....

  12. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    energy are presented in this section. Statistics are presented by subgroups based on building characteristics, and by subgroups based on lighting equipment. The three sets of...

  13. Commercial Buildings Integration

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Buildings Integration Images courtesy CREE, True Manufacturing, A.O. Smith, Bernstein Associates, Cambridge Engineering, Alliance Laundry Systems, NREL 2 Strategic Fit within ...

  14. Public Assembly Buildings

    Energy Information Administration (EIA) (indexed site)

    Most public assembly buildings were not large convention centers or entertainment arenas; about two-fifths fell into the smallest size category. About one-fifth of public...

  15. Buildings Interoperability Landscape

    Energy.gov [DOE] (indexed site)

    ... that provide wide-area network communication services over wired cables or wireless. ... Supervisory, Management Electric Vehicle Charging Companies EVCharge Companies that build ...

  16. Whole Building Energy Simulation

    Energy.gov [DOE]

    Whole building energy simulation, also referred to as energy modeling, can and should be incorporated early during project planning to provide energy impact feedback for which design considerations...

  17. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  18. High Performance Sustainable Buildings

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    science and bioscience capabiities. Occupational Medicine will become a High Performance Sustainable Building in 2013. On the former County landfill, a photovoltaic array field...

  19. Building a Microgrid

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    a Microgrid - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee ... Twitter Google + Vimeo Newsletter Signup SlideShare Building a Microgrid HomeCustomers & ...

  20. Building Science- Ventilation

    Energy.gov [DOE]

    This presentation was given at the Summer 2012 DOE Building America meeting on July 25, 2012, and addressed the question "What are the best ventilation techniques"

  1. Transamerica Pyramid Building

    SciTech Connect

    2010-04-01

    This is a combined heat and power (CHP) project profile on a 1 MW CCHP system at the Transamerica Pyramid Building in San Francisco, California.

  2. Better Buildings Workforce Guidelines

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Building Commissioning Association The South-central Partnership for Energy Efficiency as a Resource NEEC - Northwest Energy Efficiency Council Vornado Realty Trust BOMI ...

  3. Building Awards | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    NREL's high-performance buildings are sustainability models for the use of energy ... the HP Apollo 8000 System 2014 DOE Sustainability Award 2014 Finalist for Project ...

  4. Warehouse and Storage Buildings

    Energy Information Administration (EIA) (indexed site)

    belongings. Basic Characteristics See also: Equipment | Activity Subcategories | Energy Use Warehouse and Storage Buildings... While the idea of a warehouse may bring to...

  5. Religious Worship Buildings

    Energy Information Administration (EIA) (indexed site)

    Religious Worship Characteristics by Activity... Religious Worship Religious worship buildings are those in which people gather for religious activities. Basic Characteristics ...

  6. What is Building America?

    ScienceCinema

    None

    2016-07-12

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  7. Energy Efficient Buildings Hub

    Energy.gov [DOE]

    Science and industry work together to improve energy efficiency and reduce carbon emissions of both new and existing buildings while also stimulating private investment and quality job creation.

  8. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  9. Data & Communication for Buildings

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    National Laboratory Technical Meeting on DataCommunication Standards and Interoperability of Building Appliances, Equipment, and Systems 1 May 2014 Topics Why are we here? ...

  10. New Buildings Program

    Energy.gov [DOE]

    Energy Trust of Oregon offers commercial businesses in Oregon a menu of services and incentives for new building construction or major renovation projects which utilize energy efficient equipment...

  11. Advanced Commercial Buildings Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Current cost share percentage is 56%. Budget History Oct 1, 2014- FY2014 (past) FY2015 ... and GoNo-Go Criteria including: * Benchmarking existing small commercial buildings * ...

  12. Building Energy Code

    Energy.gov [DOE]

    The North Carolina State Building Code Council is responsible for developing all state codes. By statute, the Commissioner of Insurance has general supervision over the administration and...

  13. Building Energy Code

    Energy.gov [DOE]

    Kansas adopted the 2006 International Energy Conservation Code (IECC) as "the applicable state standard" for commercial and industrial buildings. Enforcement is provided by local jurisdictions; t...

  14. Building Energy Code

    Energy.gov [DOE]

    The Maryland Building Performance Standards (MBPS) are adopted by the Maryland Department of Housing and Community Development (DHCD) Codes Administration. As required by legislation passed in...

  15. Commercial Buildings Characteristics 1992

    Energy Information Administration (EIA) (indexed site)

    the sponsor the government, utility or sponsored in-house. Energy Management and Control System Heating or cooling system monitored or controlled by a computerized building...

  16. HISTORY OF BUILDING 828

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ......... 13 5. Laboratory equipment of the mechanical test group, ... Grant Clive in charge of the laboratory equipment and building design work. 4 A ...

  17. Staff | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    ... As manager of the commercial buildings research team, he ... documents such as the Advanced Energy Design Guides ... Ph.D., M.S. Computational and Applied Mathematics, North ...

  18. Hot Cell Complex Building

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Based on the safety and functional requirements, starting from existing layout and existing safety analyses, the first step of the Hot Cell Complex Building Engineering Contract ...

  19. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Building Energy Asset Tool Market Stimulation Digital Tools & Solutions Lock-In Savings ... & Standards Tools & Programs Market Transformation No Codes IECC 200912 90% Compliance ...

  20. Buildings Interoperability Proceedings

    Energy.gov [DOE] (indexed site)

    for t he integration of intelligent, connected buildings equipment and automation s ystems, understanding the importance of integration frameworks and product...

  1. Building Energy Modeling Library

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Modeling (BEM) Library TDM - Amir Roth Ellen Franconi Rocky Mountain Institute ... Project Overview Building Energy Modeling (BEM) Library * Define and develop a ...

  2. Building Energy Consumption Analysis

    Energy Science and Technology Software Center

    2005-03-02

    DOE2.1E-121SUNOS is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS).« less

  3. Building Energy Codes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    David Cohan Program Manager Building Energy Codes April 22, 2014 Presentation Outline * Mission * Goals * Program Organization * StrategiesRoles * Near-Term Focus * Measuring ...

  4. State Building Energy Standards

    Energy.gov [DOE]

    In May 2013 the Sustainable Coonstruction Advisory Committee responsible for adopting buildings codes was mandated to automatically adopt tne most recent version of the rating systems developed b...

  5. Buildings","Total

    Energy Information Administration (EIA) (indexed site)

    ...",5908,5816,5204,316,3558,619,868,387 "Principal Building Activity" "Education ...",9874,9870,8983,489,7692,461,520,191 "Food Sales...

  6. Buildings","Total

    Energy Information Administration (EIA) (indexed site)

    ...",5035,5035,4688,448,3331,410,877,166 "Principal Building Activity" "Education ...",8651,8651,7927,514,6859,357,528,202 "Food Sales...

  7. What is Building America?

    SciTech Connect

    2013-06-20

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  8. Tribal Green Building

    Energy.gov [DOE] (indexed site)

    Review eere.energy.gov Public Service of Colorado Ponnequin Wind Farm Tribal Energy Program Review Denver, CO Tribal Green Building Gepetta S. Billie Graduate Intern, Tribal Energy ...

  9. Los Alamos National Laboratory W76 Pit Tube Lifetime Study

    SciTech Connect

    Abeln, Terri G.

    2012-04-25

    A metallurgical study was requested as part of the Los Alamos National Laboratory (LANL) W76-1 life-extension program (LEP) involving a lifetime analysis of type 304 stainless steel pit tubes subject to repeat bending loads during assembly and disassembly operations at BWXT/Pantex. This initial test phase was completed during the calendar years of 2004-2006 and the report not issued until additional recommended tests could be performed. These tests have not been funded to this date and therefore this report is considered final. Tubes were reportedly fabricated according to Rocky Flats specification P14548 - Seamless Type 304 VIM/VAR Stainless Steel Tubing. Tube diameter was specified as 0.125 inches and wall thickness as 0.028 inches. A heat treat condition is not specified and the hardness range specification can be characteristic of both 1/8 and 1/4 hard conditions. Properties of all tubes tested were within specification. Metallographic analysis could not conclusively determine a specified limit to number of bends allowable. A statistical analysis suggests a range of 5-7 bends with a 99.95% confidence limit. See the 'Statistical Analysis' section of this report. The initial phase of this study involved two separate sets of test specimens. The first group was part of an investigation originating in the ESA-GTS [now Gas Transfer Systems (W-7) Group]. After the bend cycle test parameters were chosen (all three required bends subjected to the same amount of bend cycles) and the tubes bent, the investigation was transferred to Terri Abeln (Metallurgical Science and Engineering) for analysis. Subsequently, another limited quantity of tubes became available for testing and were cycled with the same bending fixture, but with different test parameters determined by T. Abeln.

  10. Building America Building Science Education Roadmap | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Education Roadmap Building America Building Science Education Roadmap This roadmap outlines steps that U.S. Department of Energy Building America program must take to develop a robust building science education curriculum in coming years. ba_bldg_science_education_roadmap.pdf (645.63 KB) More Documents & Publications DOE Challenge Home Student Competition Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher

  11. Building America Top Innovations Hall of Fame Profile - Building

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America's Top Innovations Propel the Home Building Industry toward Higher Performance | Department of Energy Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance This Building America Innovations profile describes the concept for the U.S. Department of Energy

  12. Reference Buildings by Building Type: Midrise Apartment

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  13. Reference Buildings by Building Type: Supermarket

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  14. Reference Buildings by Building Type: Primary school

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  15. Reference Buildings by Building Type: Medium office

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  16. Reference Buildings by Building Type: Hospital

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  17. Reference Buildings by Building Type: Large Hotel

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  18. Reference Buildings by Building Type: Small Hotel

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  19. Reference Buildings by Building Type: Secondary school

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  20. Reference Buildings by Building Type: Small office

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  1. Reference Buildings by Building Type: Warehouse

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  2. Reference Buildings by Building Type: Strip mall

    Energy.gov [DOE]

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  3. 200 Market Building

    Building Catalog

    Portland, Oregon The 200 Market Building is a high-rise built in 1973 and located in downtown Portland, Oregon. It was purchased in 1988 by its current owner, 200 Market Associates, primarily because of its optimal location in Portland's central business district. Since 1989 the building has undergone continuous improvements in multiple phases. 07/08/2015 - 10:06

  4. High Performance Sustainable Building

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2008-06-20

    The guide supports DOE O 413.3A and provides useful information on the incorporation of high performance sustainable building principles into building-related General Plant Projects and Institutional General Plant Projects at DOE sites. Canceled by DOE G 413.3-6A. Does not cancel other directives.

  5. Better Buildings Summit

    Energy.gov [DOE]

    At the 2016 Better Buildings Summit, more than 100 sessions will be offered across sector-specific and cross-cutting tracks. For public sector attendees, we are featuring a range of sessions relevant to improving the energy efficiency of our nation's buildings, schools, and homes.

  6. On the low carrier lifetime edge zone in multicrystalline silicon ingots

    SciTech Connect

    Jiang, Tingting; Yu, Xuegong; Wang, Lei; Gu, Xin; Yang, Deren

    2014-01-07

    We have demonstrated the cause of low minority carrier lifetime corresponding to the edge zone of casting multicrystalline silicon ingots and its influence on the performance of solar cells. It is found that the concentration of substitutional carbon, interstitial oxygen, and dislocation density have no direct correlation with the low minority carrier lifetime in the edge zone. However, the distribution of interstitial iron exactly coincides with the minority carrier lifetime, indicating that iron contamination is mainly responsible for the lifetime degradation. After phosphorus diffusion gettering process, the low carrier lifetime region became narrower, and the concentration of interstitial iron is reduced by almost one order of magnitude. However, the carrier lifetime in the edge zone cannot be raised to average level. After celling process, the internal quantum efficiency map of the edge zone has a lower response to the long wavelength light, in accordance with the minority carrier lifetime distribution in this region. Therefore, the solar cells based on edge zones exhibit slightly lower efficiency than those conventional ones.

  7. NREL Buildings Research Video

    ScienceCinema

    None

    2016-07-12

    Through research, the National Renewable Energy Laboratory (NREL) has developed many strategies and design techniques to ensure both commercial and residential buildings use as little energy as possible and also work well with the surroundings. Here you will find a video that introduces the work of NREL Buildings Research, highlights some of the facilities on the NREL campus, and demonstrates these efficient building strategies. Watch this video to see design highlights of the Science and Technology Facility on the NREL campus—the first Federal building to be LEED® Platinum certified. Additionally, the video demonstrates the energy-saving features of NRELs Thermal Test Facility. For a text version of this video visit http://www.nrel.gov/buildings/about_research_text_version.html

  8. Stability and Lifetime of K-CoMoSx Mixed Alcohol Catalysts

    SciTech Connect

    Hensley, J. E.; Ruddy, D.; Schaidle, J.; Ferrell, J.; Thibodeaux, J.

    2013-01-01

    Researchers have studied sulfide-type catalysts for the production of mixed alcohols from synthesis gas for several decades. Despite many advances in the art, these processes are not yet commercial, due in large part to mediocre economics and the added risk associated with uncertainty in catalyst lifetime. This talk will outline some recent studies in the lifetime and stability of K-CoMoSx-type mixed alcohol catalysts. Specifically, studies of long term operation (> 3000h), sulfiding agents, simulated methanol recycle, and morphology (probed via XRD and XPS) will be discussed, with the conclusion that these materials are likely to exhibit acceptable lifetimes in continuous operation.

  9. Calculation of the extinction cross section and lifetime of a gold nanoparticle using FDTD simulations

    SciTech Connect

    Radhakrishnan, Archana; Murugesan, Dr V.

    2014-10-15

    The electromagnetic theory of light explains the behavior of light in most of the domains quite accurately. The problem arises when the exact solution of the Maxwell's equation is not present, in case of objects with arbitrary geometry. To find the extinction cross-section and lifetime of the gold nanoparticle, the software FDTD solutions 8.6 by Lumerical is employed. The extinction cross-sections and lifetimes of Gold nanospheres of different sizes and arrangements are studied using pulse lengths of the order of femtoseconds. The decay constant and other properties are compared. Further, the lifetimes are calculated using frequency and time domain calculations.

  10. Using Minority Carrier Lifetime Measurement to Determine Saw Damage Characteristics on Si Wafer Surfaces

    SciTech Connect

    Sopori, Bhushan; Devayajanam, Srinivas; Basnyat, Prakash

    2015-06-14

    The damage on the Si wafer surfaces, caused by ingot cutting, is determined from measurement of minority carrier lifetime (..tau..eff). Samples are sequentially etched to remove thin layers from each surface and lifetime is measured after each etch step. The thickness-removed at which the lifetime reaches a peak value corresponds to the damage depth. This technique also allows the depth distribution of the damage to be quantified in terms of surface recombination velocity (SRV). An accurate measurement of ..tau..eff requires corrections to optical reflection, and transmission to account for changes in the surface morphology and in the wafer thickness.

  11. New Tool Quantitatively Maps Minority-Carrier Lifetime of Multicrystalline Silicon Bricks (Fact Sheet)

    SciTech Connect

    Not Available

    2011-11-01

    NREL's new imaging tool could provide manufacturers with insight on their processes. Scientists at the National Renewable Energy Laboratory (NREL) have used capabilities within the Process Development and Integration Laboratory (PDIL) to generate quantitative minority-carrier lifetime maps of multicrystalline silicon (mc-Si) bricks. This feat has been accomplished by using the PDIL's photoluminescence (PL) imaging system in conjunction with transient lifetime measurements obtained using a custom NREL-designed resonance-coupled photoconductive decay (RCPCD) system. PL imaging can obtain rapid high-resolution images that provide a qualitative assessment of the material lifetime-with the lifetime proportional to the pixel intensity. In contrast, the RCPCD technique provides a fast quantitative measure of the lifetime with a lower resolution and penetrates millimeters into the mc-Si brick, providing information on bulk lifetimes and material quality. This technique contrasts with commercially available minority-carrier lifetime mapping systems that use microwave conductivity measurements. Such measurements are dominated by surface recombination and lack information on the material quality within the bulk of the brick. By combining these two complementary techniques, we obtain high-resolution lifetime maps at very fast data acquisition times-attributes necessary for a production-based diagnostic tool. These bulk lifetime measurements provide manufacturers with invaluable feedback on their silicon ingot casting processes. NREL has been applying the PL images of lifetime in mc-Si bricks in collaboration with a U.S. photovoltaic industry partner through Recovery Act Funded Project ARRA T24. NREL developed a new tool to quantitatively map minority-carrier lifetime of multicrystalline silicon bricks by using photoluminescence imaging in conjunction with resonance-coupled photoconductive decay measurements. Researchers are not hindered by surface recombination and can look

  12. Advanced Models and Controls for Prediction and Extension of Battery Lifetime (Presentation)

    SciTech Connect

    Smith, K.; Wood, E.; Santhanagopalan, S.; Kim, G.; Pesaran, A.

    2014-02-01

    Predictive models of capacity and power fade must consider a multiplicity of degradation modes experienced by Li-ion batteries in the automotive environment. Lacking accurate models and tests, lifetime uncertainty must presently be absorbed by overdesign and excess warranty costs. To reduce these costs and extend life, degradation models are under development that predict lifetime more accurately and with less test data. The lifetime models provide engineering feedback for cell, pack and system designs and are being incorporated into real-time control strategies.

  13. Correlation of CsK2Sb photocathode lifetime with antimony thickness

    SciTech Connect

    Mamun, M. A.; Hernandez-Garcia, C.; Poelker, M.; Elmustafa, A. A.

    2015-06-01

    CsK2Sb photocathodes with quantum efficiency on the order of 10% at 532 nm, and lifetime greater than 90 days at low voltage, were successfully manufactured via co-deposition of alkali species emanating from an effusion source. Photocathodes were characterized as a function of antimony layer thickness and alkali consumption, inside a vacuum chamber that was initially baked, but frequently vented without re-baking. Photocathode lifetime measured at low voltage is correlated with the antimony layer thickness. Photocathodes manufactured with comparatively thick antimony layers exhibited the best lifetime. We speculate that the antimony layer serves as a reservoir, or sponge, for the alkali.

  14. Building America Top Innovations 2013 Profile Building America Solution Center

    SciTech Connect

    none,

    2013-09-01

    This Top Innovation profile provides information about the Building America Solution Center created by Pacific Northwest National Laboratory, a web tool connecting users to thousands of pieces of building science information developed by DOEs Building America research partners.

  15. City of Chandler- Green Building Requirement for City Buildings

    Energy.gov [DOE]

    Additionally, all renovations and all new non-occupied buildings and all new occupied buildings smaller than 5,000 square feet must include as many green building principles as are feasible. The...

  16. City of Scottsdale- Green Building Policy for Public Buildings

    Energy.gov [DOE]

    In 2005, Scottsdale approved a green building policy for new city buildings and remodels. The resolution requires all new, occupied city buildings of any size to be designed, contracted and built...

  17. Building America Solution Center- Building America Top Innovation

    Energy.gov [DOE]

    PNNL set up the framework for the Building America Solution Center, a web tool connecting users to thousands of pieces of building science information developed by DOE’s Building America research partners.

  18. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America: Research for Real-World Results Building America Webinar: Building America: Research for Real-World Results For 20 years, the U.S. Department of Energy's (DOE) Building ...

  19. Buildings Interoperability Landscape

    SciTech Connect

    Hardin, Dave; Stephan, Eric G.; Wang, Weimin; Corbin, Charles D.; Widergren, Steven E.

    2015-12-31

    Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability lie the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.

  20. Building Energy Asset Score: Building Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Building Owners Building Energy Asset Score: Building Owners The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use. View information

  1. Building Science-Based Climate Maps - Building America Top Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on the IECC climate zone map. It may not be intuitively obvious why a U.S. climate zone map is so important to the construction industry. Thanks to this Building America Top Innovation, building science education, energy code development, and residential design can much more effectively integrate

  2. Buildings-to-Grid Technical Opportunities: From the Buildings Perspective |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Buildings Perspective Buildings-to-Grid Technical Opportunities: From the Buildings Perspective Technological advances in demand response and energy efficiency have increased the utility of residential and commercial buildings for owners and operators. Yet buildings still lack the capacity to adapt to both internal and external changes, such as occupant needs or grid stability concerns. This report describes technologies and systems needed to transform buildings from the

  3. House Simulation Protocols (Building America Benchmark) - Building America

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Top Innovation | Department of Energy House Simulation Protocols (Building America Benchmark) - Building America Top Innovation House Simulation Protocols (Building America Benchmark) - Building America Top Innovation Photo of a house prototype. As Building America has grown to include a large and diverse cross-section of the home building and retrofit industries, it has become more important to develop accurate, consistent analysis techniques to measure progress towards the program's goals.

  4. Building America Top Innovations Hall of Fame Profile - Building Energy

    Energy Saver

    Optimization Analysis Method (BEopt) | Department of Energy America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) 3_3a_ba_innov_beopt_011713.pdf (877.48 KB) More Documents & Publications Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation BEopt Version 2.0: New Features Building America Webinar:

  5. Better Buildings Summit

    Energy.gov [DOE]

    Department of Energy would like to convene with Champions that are in attendance so please reach out if you or a representative is planning to attend. The Better Buildings Summit is a national meeting where leading organizations across key sectors showcase solutions to cut energy intensity in their buildings portfolio-wide by 20% over the next ten years. This Summit is designed for partners and stakeholders to exchange best practices and highlight demonstrated market solutions with an equal emphasis on discussing future opportunities for greater energy efficiency in America’s homes and buildings.

  6. INL Green Building Strategy

    SciTech Connect

    Jennifer Dalton

    2005-05-01

    Green buildings, also known as sustainable buildings, resource efficient buildings, and high performance buildings, are structures that minimize the impact on the environment by using less energy and water, reducing solid waste and pollutants, and limiting the depletion of natural resources. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish the mission. This infrastructure, particularly the buildings, should incorporate green design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. With this in mind, the recommendations described in this strategy are intended to form the INL foundation for green building standards. The recommendations in this strategy are broken down into three levels: Baseline Minimum, Leadership in Energy and Environmental Design (LEED)Certification, and Innovative. Baseline Minimum features should be included in all new occupied buildings no matter what the purpose or size. These features do not require significant research, design, or capital costs and yet they can reduce Operation and Maintenance (O&M) costs and produce more environmentally friendly buildings. LEED Certification features are more aggressive than the Baseline Minimums in that they require documentation, studies, and/or additional funding. Combined with the Baseline Minimums, many of the features in this level will need to be implemented to achieve the goal of LEED certification. LEED Silver certification should be the minimum goal for all new buildings (including office buildings, laboratories, cafeterias, and visitor centers) greater than 25,000 square feet or a total cost of $10 million. Innovative features can also contribute to LEED certification, but are less mainstream than those listed in the previous two levels. These features are identified as areas where

  7. University Of Michigan Develops Innovative Strategy For Increasing Lifetime of Blue Phosphorescent Oleds

    Office of Energy Efficiency and Renewable Energy (EERE)

    The performance of phosphorescent OLEDs (PHOLEDs) has long been constrained by the short lifetime of the blue OLED component. With the help of DOE funding, the University of Michigan – in...

  8. Standoff Trace Chemical Sensing via Manipulation of Excited Electronic State Lifetimes

    SciTech Connect

    Rudakov, Fedor M

    2013-01-01

    We present a technique for standoff trace chemical sensing that is based on the dependence of excited electronic state lifetimes on the amount of internal vibrational energy. Time resolved photoionization measurements show that the lifetime of the S1 state in N,N-dimethylisopropylamine (DMIPA) decreases exponentially with the amount of energy deposited into vibrational degrees of freedom. This property is employed to acquire spectral signatures of the molecule. Two nanosecond laser pulses are used, one (266 nm) to ionize the molecule through the S1 state and another, with tunable wavelength, to alter the lifetime of the S1 state by depositing energy into vibrations. Reduction of the S1 state lifetime results in a dip in ionization efficiency that is observed by remotely probing the laser-induced plasma with microwave radiation.

  9. Lifetime measurements of high-lying short lived states in {sup 69}As

    SciTech Connect

    Matejska-Minda, M.; Bednarczyk, P.; Fornal, B.; Ciemala, M.; Kmiecik, M.; Krzysiek, M.; Maj, A.; Meczynski, W.; Myalski, S.; Styczen, J.; Zieblinski, M.; Angelis, G. de; Huyuk, T.; Michelagnoli, C.; Sahin, E.; Aydin, S.; Farnea, E.; Menegazzo, R.; Recchia, F.; Ur, C. A.; and others

    2012-10-20

    Lifetimes of high-spin states in {sup 69}As have been measured using Doppler shift attenuation technique with the GASP and RFD setup. The determined transition probabilities indicate large deformation associated with some rotational bands in this nucleus.

  10. Trends in Commercial Buildings--Buildings Trend Detail

    Energy Information Administration (EIA) (indexed site)

    Center at (202) 586-8800. Energy Information Administration Commercial Buildings Energy Consumption Survey Figure 2. 1989 to 1999 building trend with 95% confidence ranges...

  11. Buildings-to-Grid Technical Opportunities: From the Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Buildings-to-Grid Technical Opportunities: From the Buildings Perspective Technological advances in demand response and energy efficiency have increased the utility of residential ...

  12. Building America Webinar: Building America: Research for Real...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    America: Research for Real-World Results Building America Webinar: Building America: ... I DOE ZERH Webinar: Technical Resources for Marketing and Selling Zero Energy Ready Homes

  13. Property:Buildings/ModelBuildingType | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Religious Worship Service Warehouse and Storage Other Vacant Pages using the property "BuildingsModelBuildingType" Showing 12 pages using this property. G General Merchandise...

  14. Better Buildings Webinar: Better Buildings Alliance- Annual Open House Webinar

    Energy.gov [DOE]

    The Better Buildings Alliance is hosting a webinar on new energy efficiency resources and upcoming opportunities available this year through DOE's Better Building Alliance.

  15. Building America Top Innovations Hall of Fame Profile … Building...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Innovations sponsored by the U.S. Department of Energy's (DOE's) Building America program ... DOE established the Building America program in 1995 to address both the huge ...

  16. Seven NNSS buildings achieve High Performance Sustainable Building...

    National Nuclear Security Administration (NNSA)

    Sustainable Building (HPSB) plaques to the NNSS team for seven "green" buildings. ... in the areas of energy, water and waste reduction, as well as tenant health and comfort. ...

  17. Building America: Bringing Building Innovations to Market | Department...

    Office of Environmental Management (EM)

    The U.S. Department of Energy's (DOE) Building America program has been a source of innovations in residential building energy performance, durability, quality, affordability, and ...

  18. Transforming Ordinary Buildings into Smart Buildings via Low...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sensors and Sensor Networks Transforming Ordinary Buildings into Smart Buildings via Low-Cost, Self-Powering Wireless Sensors and Sensor Networks Lead Performer: Case ...

  19. Building America Research Teams: Spotlight on Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA)

    Energy.gov [DOE]

    This article profiles the Building America teams, Alliance for Residential Building Innovation (ARBI) and Building America Research Alliance (BARA).

  20. Overview of Commercial Buildings, 2003

    Reports and Publications

    2008-01-01

    The Energy Information Administration conducts the Commercial Buildings Energy Consumption Survey (CBECS) to collect information on energy-related building characteristics and types and amounts of energy consumed in commercial buildings in the United States.

  1. Building Technologies Program Key Activities

    SciTech Connect

    2011-12-15

    The Building Technologies Program (BTP) employs a balanced approach to making buildings more energy efficient. The three pillars of our program, research and development (R&D), market stimulation, and building and equipment standards, help meet our strategic vision.

  2. How to Build a Tower

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Volunteers - Sign Up About Science Bowl Curriculum and Activities How to Build a Motor The Great Marble Drop How to Build a Turbine How to Build a Tower Classroom...

  3. A portable time-domain LED fluorimeter for nanosecond fluorescence lifetime measurements

    SciTech Connect

    Wang, Hongtao; Salthouse, Christopher D.; Qi, Ying; Mountziaris, T. J.; Chemical Engineering Department, University of Massachusetts, Amherst, Massachusetts 01003

    2014-05-15

    Fluorescence lifetime measurements are becoming increasingly important in chemical and biological research. Time-domain lifetime measurements offer fluorescence multiplexing and improved handling of interferers compared with the frequency-domain technique. In this paper, an all solid-state, filterless, and highly portable light-emitting-diode based time-domain fluorimeter (LED TDF) is reported for the measurement of nanosecond fluorescence lifetimes. LED based excitation provides more wavelengths options compared to laser diode based excitation, but the excitation is less effective due to the uncollimated beam, less optical power, and longer latency in state transition. Pulse triggering and pre-bias techniques were implemented in our LED TDF to improve the peak optical power to over 100 mW. The proposed pulsing circuit achieved an excitation light fall time of less than 2 ns. Electrical resetting technique realized a time-gated photo-detector to remove the interference of the excitation light with fluorescence. These techniques allow the LED fluorimeter to accurately measure the fluorescence lifetime of fluorescein down to concentration of 0.5 μM. In addition, all filters required in traditional instruments are eliminated for the non-attenuated excitation/emission light power. These achievements make the reported device attractive to biochemical laboratories seeking for highly portable lifetime detection devices for developing sensors based on fluorescence lifetime changes. The device was initially validated by measuring the lifetimes of three commercial fluorophores and comparing them with reported lifetime data. It was subsequently used to characterize a ZnSe quantum dot based DNA sensor.

  4. Ratio of D/sup 0/ and D/sup +/ lifetimes from their semileptonic decays

    SciTech Connect

    Donaldson, G.J.

    1980-06-01

    The conventional expectation for the decays of D mesons assumes that the charm quark decays in the presence of light, spectator quarks and thus the lifetimes of both charged and uncharged states are equal. In this article, evidence is presented from DELCO (at SPEAR) that the D lifetimes are quite different for neutral and charged mesons, and the results which have also become available from other experiments are reviewed.

  5. Cascade Problems in Some Atomic Lifetime Measurements at a Heavy-Ion Storage Ring

    SciTech Connect

    Trabert, E; Hoffmann, J; Krantz, C; Wolf, A; Ishikawa, Y; Santana, J

    2008-10-09

    Lifetimes of 3s{sup 2}3p{sup k} ground configuration levels of Al-, Si-, P-, and S-like ions of Be, Co, and Ni have been measured at a heavy-ion storage ring. Some of the observed decay curves show strong evidence of cascade repopulation from specific 3d levels that feature lifetimes in the same multi-millisecond range as the levels of the ground configuration.

  6. Building Energy Code

    Energy.gov [DOE]

    NOTE: On March 9, 2016, the State Fire Prevention and Building Code Council adopted major updates to the State Uniform Code and the State Energy Code. The State Energy Code has been updated to 2015...

  7. Lighting in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Ballast: See High-Efficiency Ballast. Btu: British thermal unit. A unit quantity of energy consumed by or delivered to a building. A Btu is defined as the amount of energy...

  8. Building America Analysis Spreadsheets

    Energy.gov [DOE]

    The Building America Analysis Spreadsheets are companions to the House Simulation Protocols, and can assist with many of the calculations and look-up tables found in the report. The spreadsheets...

  9. Building Energy Code

    Energy.gov [DOE]

    A mandatory energy code is not enforced at the state level. If a local energy code is adopted, it is enforced at the local level. Builders or sellers of new residential buildings (single-family or...

  10. IT and Building Loads

    SciTech Connect

    Hastbacka, Mildred; Rutberg, Michael; Bouza, Antonio

    2013-09-30

    The article discusses available technologies for reducing IT energy consumption and the commensurate cooling load in commercial buildings. This article addresses the energy savings and market potential of these strategies as well.

  11. Building Energy Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  12. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Indiana Residential Building Code is based on the 2003 IRC with state amendments (eff. 9/11/05). This code applies to 1 and 2 family dwellings and townhouses. During the adoption process,...

  13. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    The State Building Code Council revised the Washington State Energy Code (WESC) in February 2013, effective July 1, 2013. The WESC is a state-developed code based upon ASHRAE 90.1-2010 and the...

  14. 2015 Building Energy Summit

    Energy.gov [DOE]

    The 2015 Building Energy Summit brings together leaders from both the public and private sector to debate and discuss energy efficient technologies and solutions, energy policy, funding and incentives, alternative sources of energy, and more.

  15. Green Building Requirement

    Office of Energy Efficiency and Renewable Energy (EERE)

    The new standards are phased in over the course of several years with publicly-owned buildings being the first required to comply. All new construction and substantial improvements of non...

  16. Better Buildings Summit 2015

    Energy.gov [DOE]

    Join Better Buildings partners and other stakeholders to learn the latest in making energy efficiency a smart decision for your organization.  This annual meeting is a forum for sharing innovative...

  17. Buildings Sector Analysis

    SciTech Connect

    Hostick, Donna J.; Nicholls, Andrew K.; McDonald, Sean C.; Hollomon, Jonathan B.

    2005-08-01

    A joint NREL, ORNL, and PNNL team conducted market analysis to help inform DOE/EERE's Weatherization and Intergovernmental Program planning and management decisions. This chapter presents the results of the market analysis for the Buildings sector.

  18. Passive solar buildings research

    SciTech Connect

    Balcomb, J.D.

    1992-12-31

    This chapter covers research advances in passive solar buildings research during the time span from 1982 through 1991. These advances fall within the following categories: (1) short-term energy monitoring, (2) heat transport by natural convection within buildings, and (3) design guidelines and design tools. In short-term energy monitoring, a simulation model of the building is calibrated, based on data taken in a 3-day test. The method accurately predicts performance over an extended period. Heat transport through doorways is characterized for complex situations that arise in passive solar buildings. Simple concepts and models adequately describe the energy transport in many situations of interest. In a new approach, design guidelines are automatically generated for any specific locality. Worksheets or an accompanying computer program allow the designer to quickly and accurately evaluate performance and investigate design alternatives. 29 refs., 19 figs., 2 tabs.

  19. NREL: Buildings Research - Events

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Events Below are upcoming events related to buildings research. March 2016 Sustainable NREL Walking Campus Tour March 18, 2016, 9:30 - 11:15 am Golden, CO Contact: NREL Education...

  20. Small Building Material Loan

    Energy.gov [DOE]

    Applicants may borrow up to $100,000 for projects that improve the livability of a home, improve energy efficiency, or expand space. The loan can be applied toward building materials, freight or...

  1. Computers in Commercial Buildings

    Energy Information Administration (EIA) (indexed site)

    Government-owned buildings of all types, had, on average, more than one computer per person (1,104 computers per thousand employees). They also had a fairly high ratio of...

  2. Energy Efficient Buildings Hub

    Energy.gov [DOE]

    The U.S. Department of Energy created the Energy Efficient Buildings Hub in Philadelphia, Pennsylvania to promote regional job creation and economic growth while also improving the energy...

  3. High Performance Sustainable Building

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-11-09

    This Guide highlights the DOE O 413.3B drivers for incorporating high performance sustainable building (HPSB) principles into Critical Decisions 1 through 4 and provides guidance for implementing the Order's HPSB requirements.

  4. Buildings","Year Constructed"

    Energy Information Administration (EIA) (indexed site)

    ...14,4123,4123,4530,3743 "Building Shell Conservation" "Features (more than one" "may ...31,1467,2854,4322,6087,7919,6335 "HVAC Conservation Features" "(more than one may apply)" ...

  5. Building Energy Asset Score

    Energy.gov [DOE]

    Lead Performer: Pacific Northwest National Laboratory (PNNL) – Richland, WAProject Term: Ongoing ProgramFunding Type: Direct Lab FundingProgram Webpage: Commercial Building Energy Asset Score Homepage

  6. Building Energy Code

    Energy.gov [DOE]

    In September 2011 the Nebraska Building Energy Code was updated to the 2009 International Energy Conservation Code (IECC) standards. As with the previous 2003 IECC standards, which had been in...

  7. Building Energy Code

    Energy.gov [DOE]

    In November of 2015, the Commission adopted the 2015 International Building Code (IBC) with amendments. The Commission did not adopt the 2012 International Energy Conservation Code (IECC) as part...

  8. Building Energy Code

    Energy.gov [DOE]

    Both State building codes adoption and enforcement efforts fall under the purview of the State Fire Marshal’s Office within the Department of Commerce and Insurance (C&I). Any changes to the...

  9. Building Energy Code

    Energy.gov [DOE]

    Changes to the energy code are submitted to the Uniform Building Code Commission. The proposed change is reviewed by the Commission at a monthly meeting to decide if it warrants further considera...

  10. Building Energy Code

    Energy.gov [DOE]

    Colorado is a home rule state, so no statewide energy code exists, although state government buildings do have specific requirements. Voluntary adoption of energy codes is encouraged and efforts...

  11. Building Energy Code

    Energy.gov [DOE]

    All new residential, commercial, and community-owned buildings constructed on or after January 1, 1992 that receive financing from the Alaska Housing Finance Corporation (AHFC) must comply with...

  12. Director, Building Technologies Office

    Energy.gov [DOE]

    This position is located in the Building Technologies Office (BTO) of the Office of Energy Efficiency and Renewable Energy (EERE). The mission of EERE is to create and sustain American leadership...

  13. High Performance Sustainable Building

    Directives, Delegations, and Other Requirements [Office of Management (MA)]

    2011-11-09

    This Guide provides approaches for implementing the High Performance Sustainable Building (HPSB) requirements of DOE Order 413.3B, Program and Project Management for the Acquisition of Capital Assets. Supersedes DOE G 413.3-6.

  14. Autotune Building Energy Models

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    BTO Goals: supports the BTO overarching goal of reducing building energy use 50% by 2030 BTO strategic programs: Autotune is listed as a "key service" within the BTO Strategic BEM ...

  15. Building Energy Consumption Analysis

    Energy Science and Technology Software Center

    2005-01-24

    DOE2.1E-121 is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS). DOE2.1E-121 contains modifications to DOE2.1E which allows 1000 zones to be modeled.« less

  16. Building Energy Code

    Energy.gov [DOE]

    New Hampshire adopted a mandatory statewide building code in 2002 based on the 2000 IECC. S.B. 81 was enacted in July 2007, and it upgraded the New Hampshire Energy Code to the 2006 IECC. In Dece...

  17. Buildings","Total

    Energy Information Administration (EIA) (indexed site)

    "Over 500,000",3885,3615,3367,244,2438,152,683,58 "Principal Building" "Activity" "Education",7740,7672,7259,490,6454,101,319,67 "Food Sales",642,642,595,21,552,"Q","Q","Q"...

  18. Tribal Green Building Codes

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    with even amount of white space between photos and header Tribal Green Building Codes Chelsea Chee November 1 3, 2012 SAND 2012---9858C Photos placed in horizontal position with ...

  19. Better Buildings Training Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Training Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn 1 T he Better Buildings Residential Network Training Toolkit can be used by residential energy efficiency programs interested in realizing the value of providing training opportunities for contractors, staff, and volunteers. For example, according to a comprehensive evaluation of more than 140 energy efficiency programs across the country that participated in a $500 million grant program,

  20. 2016 News | Buildings | NREL

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    2016 News Below are news stories related to Buildings. RSS Learn about RSS. October 19, 2016 NREL Announces Innovation Challenge Winner for Crowdsourced Residential Buildings Energy-Efficiency Ideas The Energy Department's (DOE) National Renewable Energy Laboratory (NREL) today announced the grand prize winner in the JUMP Smart Phone Call for Innovation. Industry partner CLEAResult provided a $3,000 prize and recognized the winner, selected by a panel of judges at the JUMP finals, during their

  1. Buildings Energy Data Book

    Buildings Energy Data Book

    7.1 National Legislation 7.2 Federal Tax Incentives 7.3 Efficiency Standards for Residential HVAC 7.4 Efficiency Standards for Commercial HVAC 7.5 Efficiency Standards for Residential Appliances 7.6 Efficiency Standards for Lighting 7.7 Water Use Standards 7.8 State Building Energy Codes 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire

  2. Buildings Energy Data Book

    Buildings Energy Data Book

    9Market Transformation 9.1 ENERGY STAR 9.2 LEED 9.3 Certification Programs 9.4 High Performance Buildings Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables This chapter contains data on two market transformation programs that reach across the United States and to other countries: the ENERGY STAR program, jointly administered by the U.S.

  3. Building | GE Global Research

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Building We're creating infrastructure, refining materials and assembling technologies that accommodate our constantly changing world. Home > Impact > Building GE Celebrates the Holidays with 3D-Printed Ornaments Scientists at GE Global Research get into the holiday spirit by bringing high-tech additive manufacturing techniques to Christmas... Read More » Global Research and GE Capital: Middle Market Collaboration In 2013, a partnering initiative between Global Research and GE Capital

  4. Better Buildings Progress Report 2012

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Report 2012 BETTER BUILDINGS PROGRESS REPORT 2012 Better Buildings Progress Report 2012 Executive Summary 1 Better Buildings - Goals and Strategies 2 Better Buildings Initiative Timeline 4 Developing Innovative, Replicable Solutions with Market Leaders 6 Making Energy Efficiency Investment Easier 13 Developing a Skilled Clean Energy Workforce 19 Federal Leadership by Example 21 Appendix A. Better Buildings Challenge Participant List 23 Appendix B. Better Buildings Challenge Showcase Projects 24

  5. Device Architecture and Lifetime Requirements for High Efficiency Multicrystalline Silicon Solar Cells

    SciTech Connect

    Wagner, H.; Hofstetter, J.; Mitchell, B.; Altermatt, P.; Buonassisi, T.

    2015-03-23

    We present a numerical simulation study of different multicrystalline silicon materials and solar cell architectures to understand today's efficiency limitations and future efficiency possibilities. We compare conventional full-area BSF and PERC solar cells to future cell designs with a gallium phosphide heteroemitter. For all designs, mc-Si materials with different excess carrier lifetime distributions are used as simulation input parameters to capture a broad range of materials. The results show that conventional solar cell designs are sufficient for generalized mean lifetimes between 40 – 90 μs, but do not give a clear advantage in terms of efficiency for higher mean lifetime mc-Si material because they are often limited by recombination in the phosphorus diffused emitter region. Heteroemitter designs instead increase in cell efficiency considerable up to generalized mean lifetimes of 380 μs because they are significantly less limited by recombination in the emitter and the bulk lifetime becomes more important. In conclusion, to benefit from increasing mc-Si lifetime, new cell designs, especially heteroemitter, are desirable.

  6. High Performance Buildings Database

    DOE Data Explorer

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  7. Energy Information Administration (EIA)- Commercial Buildings...

    Energy Information Administration (EIA) (indexed site)

    Building Characteristics Data from the 1995 Commercial Buildings Energy Consumption Survey ... for major building characteristics. Energy Consumption and Expenditures Tables, ...

  8. Commercial and Multifamily Building Benchmarking and Disclosure...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    and Multifamily Building Benchmarking and Disclosure Commercial and Multifamily Building Benchmarking and Disclosure Better Buildings Residential Network Peer Exchange Call: ...

  9. Trends in Commercial Buildings--Overview

    Energy Information Administration (EIA) (indexed site)

    Buildings > Commercial Buildings Energy Consumption Survey Survey Methodology Sampling Error, Standard Errors, and Relative Standard Errors The Commercial Buildings Energy...

  10. Sustainability in Existing Federal Buildings | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Facilities Sustainable Buildings & Campuses Sustainability in Existing Federal Buildings Sustainability in Existing Federal Buildings The General Services Administration ...

  11. Information Technology Tools for Multifamily Building Programs...

    Energy Saver

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  12. Building America Webinar: Retrofit Ventilation Strategies in...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Retrofit Ventilation Strategies in Multifamily Buildings Webinar Building America Webinar: Retrofit Ventilation Strategies in Multifamily Buildings Webinar This webinar, presented ...

  13. Overview of Commercial Buildings, 2003 - Full Report

    Energy Information Administration (EIA) (indexed site)

    Introduction Home > Households, Buildings & Industry > Commercial Buildings Energy Consumption Survey (CBECS) > Overview of Commercial Buildings Print Report: PDF Overview of...

  14. Federal Buildings Supplemental Survey 1993

    Energy Information Administration (EIA) (indexed site)

    6. Electricity Consumption and Expenditure Intensities in FBSS Buildings in Federal Region 3, 1993 Electricity Consumption Electricity Expenditures Distribution of Building-Level...

  15. Building Solutions | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    Building Solutions Jump to: navigation, search Name: Building Solutions Place: California Sector: Efficiency Product: California-based energy efficiency contractor and consultancy....

  16. CBECS Buildings Characteristics --Revised Tables

    Energy Information Administration (EIA) (indexed site)

    Totals and Means of Floorspace, Number of Workers, and Hours of Operation, 1995 Building Characteristics RSE Column Factor: All Buildings (thousand) Total Floorspace (million...

  17. Federal Buildings Supplemental Survey 1993

    Energy Information Administration (EIA) (indexed site)

    1993 Natural Gas Consumption Natural Gas Expenditures Distribution of per per per per Building-Level Intensities Total Building Square Worker per per Thousand (cubic feetsquare...

  18. Lighting in Commercial Buildings, 1986

    Energy Information Administration (EIA) (indexed site)

    Lighting in Commercial Buildings --1986 Overview Full Report and Tables Detailed analysis of energy consumption for lighting for U.S. commercial buildings. previous page...

  19. NREL: Buildings Research Home Page

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Buildings Research Artist's rendering of the courtyard view of NREL's new Research Support Facility. NREL's buildings research teams lead efforts in developing cutting-edge...

  20. Buildings Interoperability Vision Technical Meeting

    Energy.gov [DOE] (indexed site)

    and will provide input to future meetings for framing a buildings interoperability roadmap. Summary Buildings are an integral part of our nation's energy economy. The...

  1. CBECS Buildings Characteristics --Revised Tables

    Annual Energy Outlook

    Conservation Tables (16 pages, 86 kb) CONTENTS PAGES Table 41. Energy Conservation Features, Number of Buildings and Floorspace, 1995 Table 42. Building Shell Conservation ...

  2. Sustainable Buildings | Department of Energy

    Energy Saver

    Weldon Spring, Missouri, Site Read more Photovoltaic Solar Panels on LM Office Building Photovoltaic Solar Panels on LM Office Building Grand Junction, Colorado, Site Read more ...

  3. Commercial Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Science & Innovation Energy Efficiency Commercial Buildings Commercial Buildings At an estimated cost of 38 ... questions -- from how to lower your cooling costs to ways ...

  4. Solar Ready Buildings Planning Guide

    SciTech Connect

    Lisell, L.; Tetreault, T.; Watson, A.

    2009-12-01

    This guide offers a checklist for building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

  5. CBECS Buildings Characteristics --Revised Tables

    Gasoline and Diesel Fuel Update

    Number of Buildings and Floorspace, 1995 Table 26. Water-Heating Energy Sources, Number of Buildings, 1995 Table 27. Water-Heating Energy Sources, Floorspace, 1995 Table 28. ...

  6. Federal Buildings Supplemental Survey - Index Page

    Energy Information Administration (EIA) (indexed site)

    Buildings 1993 Federal Buildings Supplemental Survey Overview Full Report Tables Energy usage and energy costs, by building characteristics, for federally-owned buildings in...

  7. Health Care Buildings : Basic Characteristics Tables

    Energy Information Administration (EIA) (indexed site)

    Basic Characteristics Tables Buildings and Size Data by Basic Characteristics for Health Care Buildings Number of Buildings (thousand) Percent of Buildings Floorspace (million...

  8. Buildings*","Nongovernment-Owned Buildings",,,,"Government-Owned Buildings"

    Energy Information Administration (EIA) (indexed site)

    8. Occupancy of Nongovernment-Owned and Government-Owned Buildings, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Nongovernment-Owned Buildings",,,,"Government-Owned Buildings" ,,"Nongov- ernment- Owned Buildings","Owner Occupied","Nonowner Occupied","Unocc- upied","Govern- ment- Owned

  9. Buildings*","Principal Building Activity"

    Energy Information Administration (EIA) (indexed site)

    1. Selected Principal Building Activity: Part 1, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Principal Building Activity" ,,"Education","Food Sales","Food Service","Health Care",,"Lodging","Retail (Other Than Mall)" ,,,,,"Inpatient","Outpatient" "All Buildings* ...............",4645,386,226,297,8,121,142,443

  10. Energy Simulator Residential Buildings

    Energy Science and Technology Software Center

    1992-02-24

    SERI-RES performs thermal energy analysis of residential or small commercial buildings and has the capability of modeling passive solar equipment such as rock beds, trombe walls, and phase change material. The analysis is accomplished by simulation. A thermal model of the building is created by the user and translated into mathematical form by the program. The mathematical equations are solved repeatedly at time intervals of one hour or less for the period of simulation. Themore » mathematical representation of the building is a thermal network with nonlinear, temperature-dependent controls. A combination of forward finite differences, Jacobian iteration, and constrained optimization techniques is used to obtain a solution. An auxiliary interactive editing program, EDITOR, is included for creating building descriptions. EDITOR checks the validity of the input data and also provides facilities for storing and referencing several types of building description files. Some of the data files used by SERI-RES need to be implemented as direct-access files. Programs are included to convert sequential files to direct-access files and vice versa.« less

  11. Building America Webinar: Saving Energy in Multifamily Buildings |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Saving Energy in Multifamily Buildings Building America Webinar: Saving Energy in Multifamily Buildings This webinar introduced the Building America team Partnership for Advanced Residential Retrofit (PARR) and its partners, outlined team objectives, and highlighted their current research program, Energy Savers. webinar_multifamily_bldgs_20110726.wmv (16.04 MB) More Documents & Publications Building America Webinar: Retrofit Ventilation Strategies in Multifamily

  12. Seven NNSS buildings achieve High Performance Sustainable Building status |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) Seven NNSS buildings achieve High Performance Sustainable Building status Monday, March 21, 2016 - 2:15pm Nevada Support Facility (NSF), Nevada National Security Site administrative headquarters. Nevada National Security Site (NNSS) - The National Nuclear Security Administration announced the award today of seven High Performance Sustainable Building (HPSB) plaques to the NNSS team for seven "green" buildings. The buildings are:

  13. Buildings*","Principal Building Activity"

    Energy Information Administration (EIA) (indexed site)

    2. Selected Principal Building Activity: Part 1, Floorspace for Non-Mall Buildings, 2003" ,"Total Floorspace (million square feet)" ,"All Buildings*","Principal Building Activity" ,,"Education","Food Sales","Food Service","Health Care",,"Lodging","Retail (Other Than Mall)" ,,,,,"Inpatient","Outpatient" "All Buildings*

  14. Building America Expert Meeting: Transforming Existing Buildings through

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    New Media--An Idea Exchange | Department of Energy Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report describes results of a Building America expert meeting on September 13, 2011, in Las Vegas, Nevada, hosted by the Building America Retrofit Alliance (BARA). This meeting provided a forum for presentations and discussions on the use of new media to work with

  15. Building America Residential Buildings Energy Efficiency Meeting: July 2010

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    | Department of Energy Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link to the summary report and presentations for the Building America Energy Efficiency meeting in July 2011, held in Denver, Colorado. Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies (822.69 KB) More Documents & Publications Summary of Gaps and Barriers for Implementing

  16. Building America Webinar: Building America Research Tools | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Energy Research Tools Building America Webinar: Building America Research Tools This webinar was held on March 18, 2015, and reviewed Building America research tools, including: Field Test Best Practices, Building Energy Optimization (BEopt) software, and the National Residential Efficiency Measures Database. These tools were created to support best practices in the building science community. Presenters and specific topics for this webinar included: * Lieko Earle and Bethany Sparn, National

  17. Building America Webinar: Building America Technology-to-Market Roadmaps |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Technology-to-Market Roadmaps Building America Webinar: Building America Technology-to-Market Roadmaps This webinar introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over the coming years and result in an integrated Building America Research-to-Market Plan in 2015. This webinar also provided information about the Request for Information that was

  18. Building America Webinar: High Performance Building Enclosures: Part I,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Existing Homes | Department of Energy High Performance Building Enclosures: Part I, Existing Homes Building America Webinar: High Performance Building Enclosures: Part I, Existing Homes The webinar, presented on May 21, 2014, focused on specific Building America projects that have implemented technical solutions to retrofit building enclosures to reduce energy use and improve durability. Presenters answered tough questions such as: How can builders deal with increasing exterior foundation

  19. Archived Reference Building Type: Warehouse

    Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  20. Archived Reference Building Type: Supermarket

    Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  1. Archived Reference Building Type: Hospital

    Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  2. Building Informatics Environment

    Energy Science and Technology Software Center

    2008-06-02

    The Building Informatics Environment is a modeling environment based on the Modelica language. The environment allows users to create a computer model of a building and its energy systems with various time scales and physical resolutions. The environment can be used for rapid development of, e.g., demand controls algorithms, new HVAC system solutions and new operational strategies (controls, fault detection and diagnostics). Models for building energy and control systems are made available in the environment.more » The models can be used as provided, or they can be changed and/or linked with each other in order to model the effects that a particular user is interested in.« less

  3. Re-Building Greensburg

    ScienceCinema

    Hewitt, Steven; Wallach, Daniel; Peterson, Stephanie

    2016-07-12

    Greensburg, KS - A town that was devastated by a tornado in 2007, yet came back to be one of the Nation's most energy-efficient, sustainable communities. Civic leaders and entrepreneurs helped rally residents behind the idea of "greening" Greensburg, inspiring the construction of numerous energy-efficient buildings, some of which generate their own renewable power with solar panels and wind turbines. Many of the town's government buildings use cutting edge energy-saving technologies, saving the local taxpayers' money. Greensburg has demonstrated to the world that any city can reach its energy efficiency and renewable energy goals today using widely available technologies.

  4. Historic Building Renovations

    Energy.gov [DOE]

    When a Federal agency undertakes a renovation to an historic building, the renovation team must consider not only the uses and needs of the facility, but also a range of issues related to historic preservation. Integrating renewable energy such as solar and wind into an historic renovation has been accomplished successfully by agencies; the design and placement of any renewable energy system must be closely integrated with the overall design plans. Any renewable energy additions must maintain the integrity and defining characteristics of the building.

  5. Buildings Energy Data Book

    Buildings Energy Data Book

    5.1 Building Materials/Insulation 5.2 Windows 5.3 Heating, Cooling, and Ventilation Equipment 5.4 Water Heaters 5.5 Thermal Distribution Systems 5.6 Lighting 5.7 Appliances 5.8 Active Solar Systems 5.9 On-Site Power 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the

  6. Buildings Energy Data Book

    Buildings Energy Data Book

    Most Popular Tables PDFXLS 1.1.1 U.S. Residential and Commercial Buildings Total Primary Energy Consumption PDFXLS 3.1.4 2010 Commercial Energy End-Use Splits, by Fuel Type PDFXLS 1.1.3 Buildings Share of U.S. Primary Energy Consumption PDFXLS 3.1.1 Commercial Primary Energy Consumption, by Year and Fuel Type PDFXLS 2.1.1 Residential Primary Energy Consumption, by Year and Fuel Type PDFXLS 3.1.5 2015 Commercial Energy End-Use Splits, by Fuel Type PDFXLS 3.2.1 Total Commercial Floorspace and

  7. Bagley University Classroom Building

    Building Catalog

    Duluth, MN, MN LEED PLATINUM CERTIFIED AND PASSIVHAUS ( certification pending) CLASSROOM BUILDING The Nature Preserve where this building is located is a contiguous natural area, 55 acres in size, deeded to the University in the 1950's for educational and recreational use. The site has hiking trails through old growth hard woods frequented by the university students as well as the public. We were charged with designing a facility to serve eight different departments for the nature portions of their teaching and study at a regional University. 05/22/2015 - 08:18

  8. BETTER BUILDINGS ALLIANCE

    Energy.gov [DOE]

    Commercial buildings—our offices, schools, hospitals, restaurants, hotels and stores—consume nearly 20% of all energy used in the United States. We spend more than $200 billion each year to power our country's commercial buildings. Unfortunately, much of this energy and money is wasted; a typical commercial building could save 20% on its energy bills simply by commissioning existing systems so they operate as intended. Energy efficiency is a cost-effective way to save money, support job growth, reduce pollution, and improve competitiveness.

  9. Robust Maximum Lifetime Routing and Energy Allocation in Wireless Sensor Networks

    DOE PAGES [OSTI]

    Paschalidis, Ioannis Ch.; Wu, Ruomin

    2012-01-01

    We consider the maximum lifetime routing problem in wireless sensor networks in two settings: (a) when nodes’ initial energy is given and (b) when it is subject to optimization. The optimal solution and objective value provide optimal flows and the corresponding predicted lifetime, respectively. We stipulate that there is uncertainty in various network parameters (available energy and energy depletion rates). In setting (a) we show that for specific, yet typical, network topologies, the actual network lifetime will reach the predicted value with a probability that converges to zero as the number of nodes grows large. In setting (b) the samemore » result holds for all topologies. We develop a series of robust problem formulations, ranging from pessimistic to optimistic. A set of parameters enable the tuning of the conservatism of the formulation to obtain network flows with a desirably high probability that the corresponding lifetime prediction is achieved. We establish a number of properties for the robust network flows and energy allocations and provide numerical results to highlight the tradeoff between predicted lifetime and the probability achieved. Further, we analyze an interesting limiting regime of massively deployed sensor networks and essentially solve a continuous version of the problem.« less

  10. Webinar: The L Prize-Winning LED A19 Replacement-What Commercial Building

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Owners/Operators Can Expect in 2012 | Department of Energy The L Prize-Winning LED A19 Replacement-What Commercial Building Owners/Operators Can Expect in 2012 Webinar: The L Prize-Winning LED A19 Replacement-What Commercial Building Owners/Operators Can Expect in 2012 This January 18, 2012 webinar presented an update on the status of LED A19 lamp options for commercial businesses, with an overview of DOE's L Prize competition and the rigorous lab, lifetime, and field testing that went into

  11. Better Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Better Buildings Better Buildings Hilton Worldwide and Whole Foods Market energy teams SWAP buildings in San Francisco, CA Hilton Worldwide and Whole Foods Market energy teams SWAP buildings in San Francisco, CA In the Better Buildings Challenge SWAP, brought to you by the U.S. Department of Energy, Hilton Worldwide and Whole Foods Market - two industry giants at the top of their game in energy conservation - swap energy teams to conduct an energy audit and uncover energy savings at each other's

  12. Whole Building Performance-Based Procurement Training

    Energy.gov [DOE]

    Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  13. Buildings*","Buildings Using Any Energy

    Energy Information Administration (EIA) (indexed site)

    2. Energy Sources, Number of Buildings for Non-Mall Buildings, 2003" ,"Number of Buildings (thousand)" ,"All Buildings*","Buildings Using Any Energy Source","Energy Sources Used (more than one may apply)" ,,,"Elec- tricity","Natural Gas","Fuel Oil","District Heat","District Chilled Water","Propane","Other a " "All Buildings*

  14. Determination of carrier lifetime and mobility in colloidal quantum dot films via impedance spectroscopy

    SciTech Connect

    Rath, Arup K.; Lasanta, Tania; Bernechea, Maria; Diedenhofen, Silke L.; Konstantatos, Gerasimos

    2014-02-10

    Impedance Spectroscopy (IS) proves to be a powerful tool for the determination of carrier lifetime and majority carrier mobility in colloidal quantum dot films. We employ IS to determine the carrier lifetime in PbS quantum dot Schottky solar cells with Al and we verify the validity of the technique via transient photovoltage. We also present a simple approach based on an RC model that allows the determination of carrier mobility in PbS quantum dot films and we corroborate the results via comparison with space charge limited measurements. In summary, we demonstrate the potential of IS to characterize key-to-photovoltaics optoelectronic properties, carrier lifetime, and mobility, in a facile way.

  15. Apparatus and methods of measuring minority carrier lifetime using a liquid probe

    DOEpatents

    Li, Jian

    2016-04-12

    Methods and apparatus for measuring minority carrier lifetimes using liquid probes are provided. In one embodiment, a method of measuring the minority carrier lifetime of a semiconductor material comprises: providing a semiconductor material having a surface; forming a rectifying junction at a first location on the surface by temporarily contacting the surface with a conductive liquid probe; electrically coupling a second junction to the semiconductor material at a second location, wherein the first location and the second location are physically separated; applying a forward bias to the rectifying junction causing minority carrier injection in the semiconductor material; measuring a total capacitance as a function of frequency between the rectifying junction and the second junction; determining an inflection frequency of the total capacitance; and determining a minority lifetime of the semiconductor material from the inflection frequency.

  16. Property:Building/Boundaries | Open Energy Information

    OpenEI (Open Energy Information) [EERE & EIA]

    "BuildingBoundaries" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + Several buildings + Sweden Building 05K0002 + Part of a building +...

  17. Building 9731 | Y-12 National Security Complex

    U.S. Department of Energy (DOE) - all webpages (Extended Search)

    Building 9731 Building 9731 Building 9731, the first building completed at Y-12 is the light colored flat roof building at left center. It was called the "pilot plant."

  18. Deactivation of Building 7602

    SciTech Connect

    Yook, H.R.; Barnett, J.R.; Collins, T.L.

    1995-10-01

    The Department of Energy (DOE) has sponsored research and development programs in Building 7602 at Oak Ridge National Laboratory (ORNL) since 1984. This work focused on development of advanced technology for processing nuclear fuels. Building 7602 was used for engineering-scale tests using depleted and natural uranium to simulate the nuclear fuel. In April 1994 the DOE Office of Nuclear Energy (NE) sent supplemental FY 1994 guidance to ORNL stating that in FY 1995 and beyond, Building 7602 is considered surplus to NE programs and missions and shall be shut down (deactivated) and maintained in a radiologically and industrially safe condition with minimal surveillance and maintenance (S&M). DOE-NE subsequently provided FY 1995 funding to support the deactivation activities. Deactivation of Building 7602 was initiated on October 1, 1994. The principal activity during the first quarter of FY 1995 was removal of process materials (chemicals and uranium) from the systems. The process systems were operated to achieve chemical solution concentrations needed for reuse or disposal of the solutions prior to removal of the materials from the systems. During this phase of deactivation the process materials processed and removed were: (1) Uranyl nitrate solution 30,178 L containing 4490 kg of uranium; (2) Nitric acid (neutralized) 9850 L containing less than 0.013 kg of uranium; (3) Organic solution 3346 L containing 265 kg of uranium; (4) Uranium oxide powder 95 kg; and (5) Miscellaneous chemicals. At the end of December 1994, the process systems and control systems were shut down and deactivated. Disposition of the process materials removed from the process systems in Building 7602 proved to be the most difficult part of the deactivation. An operational stand down and funding reductions at Y-12 prevented planned conversion of the uranyl nitrate solution to depleted uranium oxide powder. This led to disposal of the uranyl nitrate solution as waste.

  19. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    SciTech Connect

    Wall, L.W.; Rosenfeld, A.H.

    1982-12-01

    Recent accomplishments in buildings energy research by the diverse groups in the Energy Efficient Buildings Program at Lawrence Berkeley Laboratory (LBL) are summarized. We review technological progress in the areas of ventilation and indoor air quality, buildings energy performance, computer modeling, windows, and artificial lighting. The need for actual consumption data to track accurately the improving energy efficiency of buildings is being addressed by the Buildings Energy Data (BED) Group at LBL. We summarize results to date from our Building Energy Use Compilation and Analysis (BECA) studies, which include time trends in the energy consumption of new commercial and new residential buildings, the measured savings being attained by both commercial and residential retrofits, and the cost-effectiveness of buildings energy conservation measures. We also examine recent comparisons of predicted vs. actual energy usage/savings, and present the case for building energy use labels.

  20. Nuclear matrix elements from direct lifetime or cross-section measurements

    SciTech Connect

    Werner, V.; Cooper, N.; Hinton, M.; Ilie, G.; Radeck, D.

    2012-11-20

    The method of simultaneous lifetime and g factor measurements using a plunger device and the RDDS and TDRIV techniques is introduced. Results on lifetimes and hyperfine-interaction parameters for 2{sup +}{sub 1} states in {sup 104-108}Pd, {sup 96,98,104}Ru, and {sup 92,94}Zr, using a plunger device. Another method to obtain electromagnetic matrix elements is direct cross section measurements using NRF. The method is outlined, and some recent results on {sup 76}Se are shown.