National Library of Energy BETA

Sample records for application refuse hauler

  1. Alternative Fuels Data Center: CNG Refuse Haulers Do Heavy Lifting...

    Alternative Fuels and Advanced Vehicles Data Center

    CNG Refuse Haulers Do Heavy Lifting in New York Watch how Smithtown uses compressed natural gas trash haulers to combat the rising cost of fuel. For information about this project, ...

  2. Clean Cities Niche Market Overview: Refuse Haulers (Brochure)

    SciTech Connect (OSTI)

    Shea, S.

    2011-09-01

    Refuse haulers are ideal for the adoption of alternative fuels and advanced vehicle technologies. By using fuels like natural gas, propane, or biodiesel, and technologies like hybrid electric and hydraulic hybrid systems, the refuse-hauling sector could substantially decrease its petroleum use and greenhouse gas emissions. Fleet managers should explore the benefits of the fuels and technologies available, as well as the individual fleet needs, before adoption.

  3. Alternative fuel trucks case studies: Running refuse haulers on compressed natural gas

    SciTech Connect (OSTI)

    Norton, P.; Kelly, K.

    1996-07-01

    This document details the experience of New York City`s compressed natural gas refuse haulers. These 35 ton vehicles have engines that displace 10 liters and provide 240 horsepower. Fuel economy, range, cost, maintenance, repair issues, and emissions are discussed. Photographs and figures illustrate the attributes of these alternative fuel vehicles.

  4. A Long Term Field Emissions Study of Natural Gas Fueled Refuse Haulers in New York City

    SciTech Connect (OSTI)

    Nigel N. Clark; Byron l. Rapp; Mridul Gautam; Wenguang Wang; Donald W. Lyons

    1998-10-19

    New York City Department of Sanitation has operated natural gas fueled refuse haulers in a pilot study: a major goal of this study was to compare the emissions from these natural gas vehicles with their diesel counterparts. The vehicles were tandem axle trucks with GVW (gross vehicle weight) rating of 69,897 pounds. The primary use of these was for street collection and transporting the refuse to a landfill. West Virginia University Transportable Heavy Duty Emissions Testing Laboratories have been engaged in monitoring the tailpipe emissions from these trucks for seven-years. In the later years of testing the hydrocarbons were speciated for non-methane and methane components. Six of these vehicles employed the older technology (mechanical mixer) Cummins L-10 lean burn natural gas engines. Five trucks were equipped with electronically controlled Detroit Diesel Series 50 lean burn engines, while another five were powered by Caterpillar stoichiometric burn 3306 natural gas engines, The Ca terpillar engines employed an exhaust oxygen sensor feedback and three way catalysts. Since the refuse haulers had automatic Allison transmissions, and since they were employed in stop-and-go city service, initial emissions measurements were made using the Central Business Cycle (SAE Jl376) for buses at 42,000 pound test weight. Some additional measurements were made using an ad hoc cycle that has been designed to be more representative of the real refuse hauler use that included several compaction cycles. The Cummins powered natural gas vehicles showed oxides of nitrogen and carbon monoxide emission variations typically associated with variable fuel mixer performance. In the first Year of testing, the stoichiometric Caterpillar engines yielded low emission levels, but in later years two of these refuse haulers had high carbon monoxide attributed to failure of the feedback system. For example, carbon monoxide on these two vehicles rose from 1.4 g/mile and 10 g/mile in 1995 to 144.9 g

  5. Alternative Fuels Data Center: Seattle's Waste Haulers are Going Green

    Alternative Fuels and Advanced Vehicles Data Center

    Seattle's Waste Haulers are Going Green to someone by E-mail Share Alternative Fuels Data Center: Seattle's Waste Haulers are Going Green on Facebook Tweet about Alternative Fuels Data Center: Seattle's Waste Haulers are Going Green on Twitter Bookmark Alternative Fuels Data Center: Seattle's Waste Haulers are Going Green on Google Bookmark Alternative Fuels Data Center: Seattle's Waste Haulers are Going Green on Delicious Rank Alternative Fuels Data Center: Seattle's Waste Haulers are Going

  6. Heavy-Duty Waste Hauler with Chemically Correct Natural Gas Engine Diluted with EGR and Using a Three-Way Catalyst: Final Report, 24 February 2004 -- 23 February 2006

    SciTech Connect (OSTI)

    Reppert, T.; Chiu, J.

    2005-09-01

    This report discusses the development of a E7G 12-liter, lean-burn natural gas engine--using stoichiometric combustion, cooled exhaust gas recirculation, and three-way catalyst technologies--for refuse haulers.

  7. New Report Compares Performance of Compressed Natural Gas Refuse...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    A new report that compares the performance of compressed natural gas (CNG) refuse haulers ... The study reviews the fuel economy, range, cost and emissions of CNG garbage trucks. Free ...

  8. Commerce Refuse To Energy Biomass Facility | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Refuse To Energy Biomass Facility Jump to: navigation, search Name Commerce Refuse To Energy Biomass Facility Facility Commerce Refuse To Energy Sector Biomass Facility Type...

  9. Growing attraction of refuse-derived fuels

    SciTech Connect (OSTI)

    Singh, R.

    1981-09-08

    A review of Dr. Andrew Porteous' book, Refuse Derived Fuels is presented. The escalating price of fossil fuel, particularily oil, together with the high cost of handling and transporting refuse makes the idea of refuse-derived fuel production an attractive and economic proposition. Refuse-derived fuel production is discussed and the various manufacturing processes in the UK and the USA are described. The pyrolysis of refuse for the production of gas, oil or heat and the production of methane and ethyl alcohol or other possibilities for refuse conversion.

  10. Knowledge-based fault diagnosis system for refuse collection vehicle

    SciTech Connect (OSTI)

    Tan, CheeFai; Juffrizal, K.; Khalil, S. N.; Nidzamuddin, M. Y.

    2015-05-15

    The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledge that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle.

  11. Binder enhanced refuse derived fuel

    DOE Patents [OSTI]

    Daugherty, Kenneth E.; Venables, Barney J.; Ohlsson, Oscar O.

    1996-01-01

    A refuse derived fuel (RDF) pellet having about 11% or more particulate calcium hydroxide which is utilized in a combustionable mixture. The pellets are used in a particulate fuel bring a mixture of 10% or more, on a heat equivalent basis, of the RDF pellet which contains calcium hydroxide as a binder, with 50% or more, on a heat equivalent basis, of a sulphur containing coal. Combustion of the mixture is effective to produce an effluent gas from the combustion zone having a reduced SO.sub.2 and polycyclic aromatic hydrocarbon content of effluent gas from similar combustion materials not containing the calcium hydroxide.

  12. Case Study - Compressed Natural Gas Refuse Fleets

    SciTech Connect (OSTI)

    Laughlin, M; Burnham, A.

    2014-02-01

    This case study explores the use of heavy-duty refuse trucks fueled by compressed natural gas highlighting three fleets from very different types of organizations.

  13. Proceedings of refuse-derived fuel (RDF)

    SciTech Connect (OSTI)

    Saltiel, C. )

    1991-01-01

    This book contains proceedings of Refuse-Derived Fuel (RDF)-Quality. Standards and Processing. Topics covered include: An Overview of RDF Processing Systems: Current Status, Design Features, and Future Trends. The Impact of Recycling and Pre-Combustion Processing of Municipal Solid Waste on Fuel Properties and Steam Combustion. The Changing Role of Standards in the Marketing of RDF. Refuse Derived Fuel Quality Requirements for Firing in Utility, Industrial or Dedicated Boilers. Refuse-Derived Fuel Moisture Effects on Boiler Performance and Operability. Refuse Derived Fuels: Technology, Processing, Quality and Combustion Experiences.

  14. NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...

    Energy.gov (indexed) [DOE]

    icon arravt051tifeinberg2011p.pdf More Documents & Publications NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure NJ Compressed Natural Gas Refuse ...

  15. NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastruct...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure 2012 DOE Hydrogen and Fuel Cells ...

  16. Alternative Fuels Data Center: Smithtown Selects CNG to Cut Refuse

    Alternative Fuels and Advanced Vehicles Data Center

    Collection Costs Smithtown Selects CNG to Cut Refuse Collection Costs to someone by E-mail Share Alternative Fuels Data Center: Smithtown Selects CNG to Cut Refuse Collection Costs on Facebook Tweet about Alternative Fuels Data Center: Smithtown Selects CNG to Cut Refuse Collection Costs on Twitter Bookmark Alternative Fuels Data Center: Smithtown Selects CNG to Cut Refuse Collection Costs on Google Bookmark Alternative Fuels Data Center: Smithtown Selects CNG to Cut Refuse Collection Costs

  17. NREL Evaluates Performance of Hydraulic Hybrid Refuse Vehicles

    SciTech Connect (OSTI)

    2015-09-01

    This highlight describes NREL's evaluation of the in-service performance of 10 next-generation hydraulic hybrid refuse vehicles (HHVs), 8 previous-generation (model year 2013) HHVs, and 8 comparable conventional diesel vehicles operated by Miami-Dade County's Public Works and Waste Management Department in southern Florida. Launched in March 2015, the on-road portion of this 12-month evaluation focuses on collecting and analyzing vehicle performance data - fuel economy, maintenance costs, and drive cycles - from the HHVs and the conventional diesel vehicles. The fuel economy of heavy-duty vehicles, such as refuse trucks, is largely dependent on the load carried and the drive cycles on which they operate. In the right applications, HHVs offer a potential fuel-cost advantage over their conventional counterparts. This advantage is contingent, however, on driving behavior and drive cycles with high kinetic intensity that take advantage of regenerative braking. NREL's evaluation will assess the performance of this technology in commercial operation and help Miami-Dade County determine the ideal routes for maximizing the fuel-saving potential of its HHVs. Based on the field data, NREL will develop a validated vehicle model using the Future Automotive Systems Technology Simulator, also known as FASTSim, to study the impacts of route selection and other vehicle parameters. NREL is also analyzing fueling and maintenance data to support total-cost-of-ownership estimations and forecasts. The study aims to improve understanding of the overall usage and effectiveness of HHVs in refuse operation compared to similar conventional vehicles and to provide unbiased technical information to interested stakeholders.

  18. Corrosion of boiler tube alloys in refuse firing: Shredded vs bulk refuse

    SciTech Connect (OSTI)

    Krause, H.H. ); Daniel, P.L.; Blue, J.D. )

    1994-08-01

    Results of corrosion probe exposures at two mass burning incinerators were compared with those conducted in a unit burning refuse-derived fuel. Tests were conducted with carbon steel, low-alloy steels, stainless steels, and high nickel-chromium alloys. Corrosion rates at similar metal and gas temperatures were essentially the same for both types of fuel. Boiler tube performance in the waterwalls of other incinerators confirmed these results. Boiler design and operating conditions appear to be more important factors in tube wastage than the extent of refuse processing.

  19. Clean Cities' Guide to Alternative Fuel and Advanced Medium- and Heavy-Duty Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01

    Guide describes the alternative fuel and advanced medium- and heavy-duty vehicles available on the market, including buses, vans, refuse haulers, and more.

  20. NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting arravt051_ti_feinberg_2012_o.pdf (2.07 MB) More Documents & Publications CX-005345: Categorical Exclusion Determination NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure

  1. Frustrated Material Refuses Orderly Arrangements | The Ames Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Frustrated Material Refuses Orderly Arrangements Unlike most materials, a newly discovered oxide of lead, copper, and tellurium does not show an orderly arrangement of electron ...

  2. Method of extracting coal from a coal refuse pile

    DOE Patents [OSTI]

    Yavorsky, Paul M.

    1991-01-01

    A method of extracting coal from a coal refuse pile comprises soaking the coal refuse pile with an aqueous alkali solution and distributing an oxygen-containing gas throughout the coal refuse pile for a time period sufficient to effect oxidation of coal contained in the coal refuse pile. The method further comprises leaching the coal refuse pile with an aqueous alkali solution to solubilize and extract the oxidized coal as alkali salts of humic acids and collecting the resulting solution containing the alkali salts of humic acids. Calcium hydroxide may be added to the solution of alkali salts of humic acid to form precipitated humates useable as a low-ash, low-sulfur solid fuel.

  3. Utilization of refuse derived fuels by the United States Navy

    SciTech Connect (OSTI)

    Lehr, D.L.

    1983-07-01

    The Resource Conservation and Recovery Act and the Safe Drinking Water Act are forcing those in charge of landfills to adhere to more stringent operating standards. This, along with the growing scarcity of landfill availability, makes the use of landfills less desirable for solid waste disposal. As such, new disposal methods that are environmentally safe and economically practical must be found. One alternative, that is not really new but which has gained renewed interest, is incineration. The Resource Conservation and Recovery Act also requires that government agencies should direct their installations to recover as many resources as possible. Therefore if incineration is to be implemented, heat recovery should be incorporated into the system. There are several processes available to convert raw refuse into a fuel for use in a heat recovery system. Refuse derived fuels (RDF) can be in the form of raw refuse, densified refuse, powdered refuse, gas, or pyrolytic oil. The only form of RDF that is economically feasible for systems designed to process less than 200 TPD (tons per day) is raw refuse. Most Navy bases generate far less than 200 TPD of solid waste and therefore the Navy has focused most of its attention on modular heat recovery incinerator (HRI) systems that utilize raw refuse as fuel.

  4. NREL: Transportation Research - Miami-Dade County Hydraulic Hybrid Refuse

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Truck Testing Miami-Dade County Hydraulic Hybrid Refuse Truck Testing Photo of garbage truck with view of lake and city in background. As part of its overall strategy to reduce emissions and fuel use, Miami-Dade County currently operates 35 hydraulic hybrid refuse vehicles, with 29 more on order. Photo courtesy of Parker Hannifin NREL is evaluating the in-service performance of 10 next-generation (model year 2015) hydraulic hybrid refuse vehicles (HHVs), 8 previous-generation (model year

  5. Jet flames of a refuse derived fuel

    SciTech Connect (OSTI)

    Weber, Roman; Kupka, Tomasz; Zajac, Krzysztof

    2009-04-15

    This paper is concerned with combustion of a refuse derived fuel in a small-scale flame. The objective is to provide a direct comparison of the RDF flame properties with properties of pulverized coal flames fired under similar boundary conditions. Measurements of temperature, gas composition (O{sub 2}, CO{sub 2}, CO, NO) and burnout have demonstrated fundamental differences between the coal flames and the RDF flames. The pulverized coals ignite in the close vicinity of the burner and most of the combustion is completed within the first 300 ms. Despite the high volatile content of the RDF, its combustion extends far into the furnace and after 1.8 s residence time only a 94% burnout has been achieved. This effect has been attributed not only to the larger particle size of fluffy RDF particles but also to differences in RDF volatiles if compared to coal volatiles. Substantial amounts of oily tars have been observed in the RDF flames even though the flame temperatures exceeded 1300 C. The presence of these tars has enhanced the slagging propensity of RDF flames and rapidly growing deposits of high carbon content have been observed. (author)

  6. Open air refuse burning video: Proton Dan the science man explores open air refuse burning

    SciTech Connect (OSTI)

    Eastburn, M.D.; Sipple, J.L.; Deramo, A.R.

    1999-07-01

    The goal of this video is to educate school children to the potential hazards of open air trash burning; to demonstrate alternative ways to dispose of trash; and to motivate students to take action to change the behavior of their parents with regard to trash burning. The burning of household trash, although illegal, is still a common practice in rural areas of Delaware. Enforcement has been difficult because the practice is often performed at night and is done across a wide rural area that is difficult to patrol on a continuing basis. The prohibition on trash burning (revised Regulation 13 of The Delaware Code of Regulations Governing The Control of Air Pollution) has been in effect since 1968, but the public has been slow to comply because trash burning has been practiced for many generations and because much of the public is unaware of the environmental impacts and/or the human health risks. This video may be valuable for other States to use as a public outreach tool regarding their problems with open air refuse burning. The focus of the video is a 7th grade science class is given various assignments relating to Earth Day and preservation of natural resources. Two children in particular are given the assignment to research and report on the hazards of open air trash burning and are asked to investigate alternative ways to dispose of refuse. Upon brainstorming how to find information on the topic, the kids decide to contact the host of a popular children's science show on broadcast television named Proton Dan the Science Man (a fictitious character and show based on Bill Nye the Science Guy). The host then invites the kids to the studio where he films his show and takes them through the topic. The TV host character takes the children to several external locations like a landfill, recycling centers, etc..

  7. Illinois user sues pipeline on refusal to transport gas

    SciTech Connect (OSTI)

    Barber, J.

    1985-12-02

    An Illinois steel company filed suit against Panhandle Eastern Pipeline Co. for refusing to transport natural gas after its gas transportation program ended on November 1. The company is asking for three times the amount it is losing, which is $7,000 per day, since being forced to purchase from a higher priced distribution company. The suit claims that Panhandle's refusal violates federal and state anti-trust laws and threatens the plant's continued operation. This is the first legal action by a single industrial user, but consumer groups have named over 20 major interstate pipelines for the same allegation when pipelines declined to participate in open access transportation under Order 436.

  8. Refuse derived fuel delivery system and distribution conveyors

    SciTech Connect (OSTI)

    Kaminski, D.J.; Frank, E.A.; Grinsteiner, C.S.

    1987-08-18

    This patent describes an apparatus for supplying comminuted combustible solid waste material from a refuse material supply to a combustion apparatus for use as fuel and wherein the combustion apparatus includes at least two fuel charging means each having a hopper for receiving comminuted combustible solid waste material, and the hoppers being positioned in side-by-side relation.

  9. Research and Development of a New Silica-Alumina Based Cementitious Material Largely Using Coal Refuse for Mine Backfill, Mine Sealing and Waste Disposal Stabilization

    SciTech Connect (OSTI)

    Henghu Sun; Yuan Yao

    2012-06-29

    Coal refuse and coal combustion byproducts as industrial solid waste stockpiles have become great threats to the environment. To activate coal refuse is one practical solution to recycle this huge amount of solid waste as substitute for Ordinary Portland Cement (OPC). The central goal of this project is to investigate and develop a new silica-alumina based cementitious material largely using coal refuse as a constituent that will be ideal for durable construction, mine backfill, mine sealing and waste disposal stabilization applications. This new material is an environment-friendly alternative to Ordinary Portland Cement. The main constituents of the new material are coal refuse and other coal wastes including coal sludge and coal combustion products (CCPs). Compared with conventional cement production, successful development of this new technology could potentially save energy and reduce greenhouse gas emissions, recycle vast amount of coal wastes, and significantly reduce production cost. A systematic research has been conducted to seek for an optimal solution for enhancing pozzolanic reactivity of the relatively inert solid waste-coal refuse in order to improve the utilization efficiency and economic benefit as a construction and building material.

  10. Project Startup: Evaluating the Performance of Hydraulic Hybrid Refuse Vehicles

    SciTech Connect (OSTI)

    2015-09-01

    The Fleet Test and Evaluation Team at the National Renewable Energy Laboratory (NREL) is evaluating the in-service performance of 10 next-generation hydraulic hybrid refuse vehicles (HHVs), 8 previous-generation HHVs, and 8 comparable conventional diesel vehicles operated by Miami-Dade County's Public Works and Waste Management Department in southern Florida. The HHVs under study - Autocar E3 refuse trucks equipped with Parker Hannifin's RunWise Advanced Series Hybrid Drive systems - can recover as much as 70 percent of the energy typically lost during braking and reuse it to power the vehicle. NREL's evaluation will assess the performance of this technology in commercial operation and help Miami-Dade County determine the ideal routes for maximizing the fuel-saving potential of its HHVs.

  11. Enhanced cover methods for surface coal refuse reclamation

    SciTech Connect (OSTI)

    Gentile, L.F.; Cargill, K.W.; McGarvie, S.D.

    1997-12-31

    Controlling acid rock drainage (ARD) can be a major component of surface mining reclamation. An enhanced reclamation cover system is being constructed to control infiltration of rain water and generation of ARD from coal-refuse disposal areas at a closed mine in southern Illinois. Development of the mine reclamation plan required consideration of ARD generation in coal refuse disposal areas located adjacent to an alluvial aquifer used for public water supply. An integrated site characterization was performed at the mine to provide information to develop and support the enhanced reclamation plan. The enhanced cover system is similar to covers required for municipal solid waste landfills by the Resource Conversation and Recovery Act (RCRA), Subtitle D regulations. The system comprises a graded and compacted gob layer, overlain by a compacted clay liner, and a protective soil cover. The results of infiltration modeling and analyses showed that the standard reclamation cover is effective in reducing infiltration by about 18 percent compared to an unreclaimed coal-refuse surface. The modeling results showed that the inhanced cover system should reduce infiltration by about 84 percent. The geochemical modeling results showed that the reduction in infiltration would help minimize ARD generation and contribute to an earlier reclamation of the mine site.

  12. Modified biochemical methane potential (BMP) assays to assess biodegradation potential of landfilled refuse

    SciTech Connect (OSTI)

    Bogner, J.E.; Rose, C.; Piorkowski, R.

    1989-01-01

    Modified Biochemical Methane Potential (BMP) assays were used to assess biogas production potential of solid landfill samples. In landfill samples with visible soil content, moisture addition alone was generally as effective at stimulating biogas production as the addition of a comprehensive nutrient media. In a variety of samples from humid and semiarid landfills, addition of an aqueous nutrient media was the most effective stimulant for biogas production; however, moisture addition was almost as effective for most samples, suggesting that water addition would be the most cost-effective field approach. Onset of methanogenesis was slower in fresh refuse samples (even when inoculated with anaerobic digester sludge) than in landfill samples, indicating that the soil into which materials are landfilled is a major source of microorganisms. High volatile solids loading in fresh refuse and landfill assays retarded methanogenesis. A comparison of anaerobic and aerobic sample handling techniques showed no significant differences with regard to onset of methanogenesis and total gas production. The technique shows initial promise with regard to replication and reproducibility of results and could be a meaningful addition to landfill site evaluations where commercial gas recovery is anticipated. The BMP technique could also be adapted to assess anaerobic biodegradability of other solid waste materials for conventional anaerobic digestion applications. 9 refs., 6 figs., 2 tabs.

  13. ULTRASONICALLY-ENHANCED DENSE-MEDIUM CYCLONING FOR FINE COAL AND COAL REFUSE IMPOUNDMENT MATERIALS

    SciTech Connect (OSTI)

    Dr. Mark S. Klima; Dr. Barbara J. Arnold

    2001-08-01

    The Pennsylvania State University, its project team (Typlex, Inc., DAGER, Inc., and PrepTech, Inc.), and advisory committee members have demonstrated the application of ultrasonic energy during dense-medium cyclining and subsequent recovery of fine coal and coal refuse impoundment materials. The results will help to extend the range of conventional dense-medium cyclining to sizes now typically cleaned in relatively inefficient water-only cyclone and spiral concentrators circuits. This technology also provides a potential approach to produce ultra-clean material as would be used for feedstocks for premium carbon products. This report describes Phase I of the project, which involved laboratory testing of dense-medium cyclining and subsequent medium recovery, with and without ultrasonic treatment, along with fundamental dispersion testing. Dense-medium cycloning was conducted with a 76.2-mm (3-in.) diameter cyclone under various conditions including magnetite grade, medium relative density, inlet pressure, cyclone geometry, and feed coal. Dense-medium recovery testing was carried out with a 305-mm (12-in.) diameter x 152-mm (6-in.) wide wet-drum magnetic separator using the cyclone clean coal and refuse products as the feed material. Fundamental testing of dispersion/reagglomeration phenomena was conducted with coal/clay mixtures. In almost all cases, the dense-medium cyclone was capable of achieving separations down to approximately 0.037 mm. Ultrasonic treatment had a slight effect on reducing the ash content of the clean coal. It was also found that ultrasonic treatment improved the purity of the magnetic fraction during wet-drum magnetic separation. The treatment was particularly beneficial for the cyclone overflow material. The fundamental testing indicated that agitation after ultrasonic treatment is necessary to disperse fine particles and to prevent agglomeration.

  14. Coal/D-RDF (densified refuse-derived fuel) co-firing project, Milwaukee County, Wisconsin

    SciTech Connect (OSTI)

    Hecklinger, R.S.; Rehm, F.R.

    1985-11-01

    A Research and Development Project was carried out to mix a densified refuse-derived fuel with coal at the fuel-receiving point and to co-fire the mixture in a spreader-stoker fired boiler. Two basic series of test runs were conducted. For the first series, coal was fired to establish a base line condition. For the second series, a mixture of coal and densified refuse-derived fuel was fired. The report describes the equipment used to densify refuse derived fuel, procedures used to prepare and handle the coal and densified refuse derived fuel mixture and the test results. The results include the effect of the coal and densified refuse derived fuel mixture on plant operations, boiler efficiency, stack emissions and EP toxicity.

  15. Combustion of refuse derived fuel in a fluidized bed

    SciTech Connect (OSTI)

    Piao, Guilin; Aono, Shigeru; Mori, Shigekatsu; Deguchi, Seiichi; Fujima, Yukihisa; Kondoh, Motohiro; Yamaguchi, Masataka

    1998-12-31

    Power generation from Refuse Derived Fuel (RDF) is an attractive utilization technology of municipal solid waste. To explain the behavior of RDF-fired fluidized bed incinerator, the commercial size RDF was continuously burnt in a 30 x 30 cm bubbling type fluidized-bed combustor. It was found that 12 kg/h of RDF feed rate was too high feed for this test unit and the Co level was higher than 500 ppm. However, 10 kg/h of RDF was a proper feed rate and the Co level was kept under 150 ppm. Secondary air injection and changing air ratio from the pipe grid were effective for the complete combustion of RDE. It was also found that HCl concentration in flue gas was controlled by the calcium component contained in RDF and its level was decreased with decreasing the combustor temperature.

  16. Determination of the fuel characteristics of refuse-derived fuels by macroanalysis

    SciTech Connect (OSTI)

    Hecklinger, R.S.; Large, R.M.

    1980-01-01

    There is need for a means of determining the fuel characteristics of refuse-derived fuels to adjust the producer/user contractual relationship for fuel value. The authors discuss efforts to establish a macroanalysis procedure.

  17. Refuse derived soluble bio-organics enhancing tomato plant growth and productivity

    SciTech Connect (OSTI)

    Sortino, Orazio; Dipasquale, Mauro; Montoneri, Enzo; Tomasso, Lorenzo; Perrone, Daniele G.; Vindrola, Daniela; Negre, Michele; Piccone, Giuseppe

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Municipal bio-wastes are a sustainable source of bio-based products. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics promote chlorophyll synthesis. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics enhance plant growth and fruit ripening rate. Black-Right-Pointing-Pointer Sustainable chemistry exploiting urban refuse allows sustainable development. Black-Right-Pointing-Pointer Chemistry, agriculture and the environment benefit from biowaste technology. - Abstract: Municipal bio-refuse (CVD), containing kitchen wastes, home gardening residues and public park trimmings, was treated with alkali to yield a soluble bio-organic fraction (SBO) and an insoluble residue. These materials were characterized using elemental analysis, potentiometric titration, and 13C NMR spectroscopy, and then applied as organic fertilizers to soil for tomato greenhouse cultivation. Their performance was compared with a commercial product obtained from animal residues. Plant growth, fruit yield and quality, and soil and leaf chemical composition were the selected performance indicators. The SBO exhibited the best performance by enhancing leaf chlorophyll content, improving plant growth and fruit ripening rate and yield. No product performance-chemical composition relationship could be assessed. Solubility could be one reason for the superior performance of SBO as a tomato growth promoter. The enhancement of leaf chlorophyll content is discussed to identify a possible link with the SBO photosensitizing properties that have been demonstrated in other work, and thus with photosynthetic performance.

  18. Hardened, environmentally disposable composite granules of coal cleaning refuse, coal combustion waste, and other wastes, and method preparing the same

    DOE Patents [OSTI]

    Burnet, G.; Gokhale, A.J.

    1990-07-10

    A hardened, environmentally inert and disposable composite granule of coal cleaning refuse and coal combustion waste and method for producing the same are disclosed, wherein the coal combustion waste is first granulated. The coal cleaning refuse is pulverized into fine particles and is then bound, as an outer layer, to the granulated coal combustion waste granules. This combination is then combusted and sintered. After cooling, the combination results in hardened, environmentally inert and disposable composite granules having cores of coal combustion waste, and outer shells of coal cleaning refuse. The composite particles are durable and extremely resistant to environmental and chemical forces. 3 figs.

  19. Hardened, environmentally disposable composite granules of coal cleaning refuse, coal combustion waste, and other wastes, and method preparing the same

    DOE Patents [OSTI]

    Burnet, George; Gokhale, Ashok J.

    1990-07-10

    A hardened, environmentally inert and disposable composite granule of coal cleaning refuse and coal combustion waste, and method for producing the same, wherein the coal combustion waste is first granulated. The coal cleaning refuse is pulverized into fine particles and is then bound, as an outer layer, to the granulated coal combustion waste granules. This combination is then combusted and sintered. After cooling, the combination results in hardened, environmentally inert and disposable composite granules having cores of coal combustion waste, and outer shells of coal cleaning refuse. The composite particles are durable and extremely resistant to environmental and chemical forces.

  20. Initial operating results of coal-fired steam generators converted to 100% refuse-derived fuel

    SciTech Connect (OSTI)

    Barsin, J.A. ); Graika, P.K. ); Gonyeau, J.A. ); Bloomer, T.M. )

    1988-01-01

    The conversion of Northern States Power Company's (NSP) Red Wing and Wilmarth steam generators to fire refuse-derived fuel (RDF) is discussed. The use of the existing plant with the necessary modifications to the boilers has allowed NSP to effectively incinerate the fuel as required by Washington and Ramsey Counties. This paper covers the six-month start-up of Red Wing No. 1, commencing in May 1987, and the operating results since the plant went commercial in July 1987.

  1. DOE feasibility report on Lake Calumet area refuse-to-energy facility

    SciTech Connect (OSTI)

    1980-06-18

    Site analyses and literature reviews were conducted to determine the feasibility of building an energy-producing municipal waste incinerator at Calumet Lake, Illinois. The amount of burnable waste produced within 5 and 10 miles of the near-Chicago site, the composition and heating value of this solid waste, and the air pollution impacts of waste incineration were determined, and the economic value of recovered material or of steam and electricity produced at the plant are discussed. It is concluded that there is sufficient refuse in the area to support a refuse processing center, that increasng landfill costs make such a center economically attractive, and that the Btu content of the refuse is adequate to produce steam for heat and power use. Replacing existing oil-fired power plants with this facility would result in an 88% reduction in current pollutant emission levels. There is a ready market for steam that could be produced. It is recommended that steps be taken to implement the establishment of the proposed waste processing center. (LCL)

  2. Combustion characteristics of refuse derived fuels. Final report

    SciTech Connect (OSTI)

    Tsang, W.; Macek, A.; Domalski, E.; Walker, J.A.; Charagundla, S.R.; Colbert, J.C.; Kirklin, D.R.; Ledford, A.E. Jr.; Decker, P.H.; Ryan, R.V.

    1983-01-01

    The purpose of the laboratory studies presented here is to furnish preliminary input to the technologists in the sense of providing relative rankings through comparisons of appropriate coal and MSW combustion related properties. Support for a future program of sub-scale (demonstration or pilot) experiments to expand on the concepts and quantify them for scale-up to industrial sizes should be provided. A complete plan for this second phase study is included as an appendix to this report. With respect to the actual experimental investigations; these consist of three main tasks. Specifically: (a) static measurements (calorimetry, proximates and ultimate analysis; (b) dynamic measurements using the full range of modern thermoanalytical instrumentation; and (c) combustion of particulates in a specially constructed laboratory furnace as well as studies on the entrainment properties of MSW. The first two tasks deal mainly with the chemical properties of municipal solid waste and is of general utility. The latter is more specifically orientated. The scale of laboratory instrumentation set definite to the limits particle size with respect to the intrainment and combustion studies. Thus the most straightforward application is to combustion in stokers, including semi-suspension units.

  3. Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Searchable Application Supplemental Information

  4. A review of trace element emissions from the combustion of refuse-derived fuel with coal

    SciTech Connect (OSTI)

    Norton, G.A. )

    1992-05-01

    The effects of cocombusting refuse-derived fuel (RDF) with coal on stack emissions of trace elements in the ash stream were reviewed. The large number of variables and uncertainties involved precluded drawing definitive conclusions regarding many of the trace elements. However, it is evident that cocombustion resulted in increased emissions of Cd, Cu, Hg, Pb, and Zn. Emissions of As and Ni tended to decrease when RDF was fired with coal. Modeling studies indicated that ambient levels of trace elements during cocombustion should be within acceptable limits. However, periodic monitoring of Cd, Hg, and Pb may be warranted in some instances.

  5. Natural gas cofiring in a refuse derived fuel incinerator: Results of a field evaluation. Topical report

    SciTech Connect (OSTI)

    Beshai, R.Z.; Hong, C.C.

    1993-10-01

    An evaluation of emissions reduction and improved operation of a municipal solid waste incinerator through natural gas cofiring is presented. A natural gas cofiring system was retrofitted on a refuse derived fuel combustor of the Columbis Solid Waste Reduction Facility in Columbus, Ohio. The field evaluation, conducted between July 6 and August 5, 1992, showed significant improvements in emissions and boiler operations. Carbon monoxide emissions were reduced from the baseline operations range of 530 to 1,950 parts per million to less than 50 ppm. Emissions of carbon dioxide, sulfur dioxide, hydrocarbons, and polychlorinated dibenzo-p-dioxins and furans were also reduced.

  6. Biogas from refuse via an earth-sheltered passive solar digester. Final report

    SciTech Connect (OSTI)

    Not Available

    1984-02-01

    As originally conceived, the project involved the design, construction and operation of a test-scale refuse digestion system and alternative energy technology, as an integral component of a planned comprehensive waste management system based on the concept of recycling and resource recovery. Specific technologies employed in the digestion system included aerobic composting and anaerobic fermentation. System inputs included non-recycleable organic refuse (paper, food wastes, etc.) and septage (septic tank sludge), both of which represent disposal problems for many North American communities, and heat. Anticipated system outputs were biogas (50 to 60% methane), a premium fuel, and compostable sludge, a potential soil amendment-fertilizer. Projected net energy output was enhanced by incorporating biological feedstock preheating, earth sheltering, passive solar heating, and sludge heat recovery into the project design. The purpose of the project was to demonstrate the economic and environmental viability of this system versus competing waste-to-energy technologies. Due primarily to institutional barriers and related factors, the project did not progress to the point of enabling the stated purpose to be demonstrated.

  7. Results of emissions testing while burning densified refuse derived fuel, Dordt College, Sioux Center, Iowa

    SciTech Connect (OSTI)

    Not Available

    1989-10-01

    Pacific Environmental Services, Inc. provided engineering and source testing services to the Council of Great Lake Governors to support their efforts in promoting the development and utilization of densified refuse derived fuels (d-RDF) and pelletized wastepaper fuels in small steam generating facilities. The emissions monitoring program was designed to provide a complete air emissions profile while burning various refuse derived fuels. The specific goal of this test program was to conduct air emissions tests at Dordt College located in Sioux Center, Iowa and to identify a relationship between fuel types and emission characteristics. The sampling protocol was carried out June 12 through June 20, 1989 on boiler {number sign}4. This unit had been previously modified to burn d-RDF. The boiler was not equipped with any type of air pollution control device so the emissions samples were collected from the boiler exhaust stack on the roof of the boilerhouse. The emissions that were sampled included: particulates; PM{sub 10} particulates; hydrochloric acid; dioxins; furans; polychlorinated biphenyls (PCB); metals and continuous monitors for CO, CO{sub 2}O{sub 2}SO{sub x}NO{sub x} and total hydrocarbons. Grab samples of the fuels were collected, composited and analyzed for heating value, moisture content, proximate and ultimate analysis, ash fusion temperature, bulk density and elemental ash analysis. Grab samples of the boiler ash were also collected and analyzed for total hydrocarbons total dioxins, total furans, total PCBs and heavy metals. 77 figs., 20 tabs.

  8. Process to convert biomass and refuse derived fuel to ethers and/or alcohols

    DOE Patents [OSTI]

    Diebold, James P.; Scahill, John W.; Chum, Helena L.; Evans, Robert J.; Rejai, Bahman; Bain, Richard L.; Overend, Ralph P.

    1996-01-01

    A process for conversion of a feedstock selected from the group consisting of biomass and refuse derived fuel (RDF) to provide reformulated gasoline components comprising a substantial amount of materials selected from the group consisting of ethers, alcohols, or mixtures thereof, comprising: drying said feedstock; subjecting said dried feedstock to fast pyrolysis using a vortex reactor or other means; catalytically cracking vapors resulting from said pyrolysis using a zeolite catalyst; condensing any aromatic byproduct fraction; catalytically alkylating any benzene present in said vapors after condensation; catalytically oligomerizing any remaining ethylene and propylene to higher olefins; isomerizing said olefins to reactive iso-olefins; and catalytically reacting said iso-olefins with an alcohol to form ethers or with water to form alcohols.

  9. Process to convert biomass and refuse derived fuel to ethers and/or alcohols

    DOE Patents [OSTI]

    Diebold, J.P.; Scahill, J.W.; Chum, H.L.; Evans, R.J.; Rejai, B.; Bain, R.L.; Overend, R.P.

    1996-04-02

    A process is described for conversion of a feedstock selected from the group consisting of biomass and refuse derived fuel (RDF) to provide reformulated gasoline components comprising a substantial amount of materials selected from the group consisting of ethers, alcohols, or mixtures thereof, comprising: drying said feedstock; subjecting said dried feedstock to fast pyrolysis using a vortex reactor or other means; catalytically cracking vapors resulting from said pyrolysis using a zeolite catalyst; condensing any aromatic byproduct fraction; catalytically alkylating any benzene present in said vapors after condensation; catalytically oligomerizing any remaining ethylene and propylene to higher olefins; isomerizing said olefins to reactive iso-olefins; and catalytically reacting said iso-olefins with an alcohol to form ethers or with water to form alcohols. 35 figs.

  10. Development and evaluation of lime enhanced refuse-derived fuel (RDF) pellets

    SciTech Connect (OSTI)

    Ohlsson, O.O.

    1996-12-31

    The disposal of municipal solid waste (MSW) is of increasing concern for municipalities and state governments throughout the US. There are two technologies currently in use for the combustion of MSW: (1) mass burning in which unprocessed MSW is burned in a heat recovery furnace, and (2) a refuse-derived fuel (RDF) product, which consists of the organic (combustible) fraction of MSW which has been processed to produce a more homogeneous fuel product than raw MSW. The RDF is either marketed to outside users or combusted on-site in a dedicated or existing furnace. In an attempt to alleviate the problems encountered with RDF as a feedstock, Argonne National Laboratory (ANL) and the University of North Texas (UNT) under the sponsorship of the US Department of Energy (DOE) began a multi-phase research study to investigate the development of a low-cost binder that would improve the quality of RDF pellets.

  11. Chlorinated organic compounds evolved during the combustion of blends of refuse-derived fuels and coals

    SciTech Connect (OSTI)

    Xiaodong Yang; Napier, J.; Sisk, B.; Wei-Ping Pan; Riley, J.T.; Lloyd, W.G.

    1996-12-31

    The objective of this study was to examine the possible formation of chlorinated organic compounds during the combustion of blends of refuse derived fuels (RDF) and coal under conditions similar to those of an atmospheric fluidized bed combustion (AFBC) system. A series of experiments were conducted using a TGA interfaced to FTIR and MS systems. Additional experiments using a tube furnace preheated to AFBC operating temperatures were also conducted. The combustion products were cryogenically trapped and analyzed with a GUMS system. The chlorination of phenols and the condensation reactions of chlorophenols were investigated in this study. A possible mechanism for the formation of chlorinated organic; compounds such as dibenzodioxins and dibenzofurans, by chlorination and condensation reactions involving phenols, was proposed.

  12. Co-firing high sulfur coal with refuse derived fuels. Quarterly report, October - December 1996

    SciTech Connect (OSTI)

    Pan, W.-P.; Riley, J.T.; Lloyd, W.G.

    1996-12-01

    The objectives of this quarter of study on the co-firing of high sulfur coal with refuse derived fuels project were two-fold. First, the effect of S0{sub 2} on the formation of chlorine during combustion processes was examined. To simulate the conditions used in the AFBC system, experiments were conducted in a quartz tube in an electrically heated furnace. The principle analytical technique used for identification of the products from this study was GC/MS. The evolved gas was trapped by an absorbent and analyzed with a GC/MS system. The preliminary results indicate an inhibiting effect of S0{sub 2} on the Deacon Reaction. Secondly, information on the evolution of chlorine, sulfur and organic compounds from coals 95031 and 95011 were studied with the AFBC system. 2 figs., 1 tab.

  13. Sulfur dioxide capture in the combustion of mixtures of lime, refuse-derived fuel, and coal

    SciTech Connect (OSTI)

    Churney, K.L.; Buckley, T.J. . Center for Chemical Technology)

    1990-06-01

    Chlorine and sulfur mass balance studies have been carried out in the combustion of mixtures of lime, refuse-derived fuel, and coal in the NIST multikilogram capacity batch combustor. The catalytic effect of manganese dioxide on the trapping of sulfur dioxide by lime was examined. Under our conditions, only 4% of the chlorine was trapped in the ash and no effect of manganese dioxide was observed. Between 42 and 14% of the total sulfur was trapped in the ash, depending upon the lime concentration. The effect of manganese dioxide on sulfur capture was not detectable. The temperature of the ash was estimated to be near 1200{degrees}C, which was in agreement with that calculated from sulfur dioxide capture thermodynamics. 10 refs., 12 figs., 10 tabs.

  14. Steam gasification of tyre waste, poplar, and refuse-derived fuel: A comparative analysis

    SciTech Connect (OSTI)

    Galvagno, S. Casciaro, G.; Casu, S.; Martino, M.; Mingazzini, C.; Russo, A.; Portofino, S.

    2009-02-15

    In the field of waste management, thermal disposal is a treatment option able to recover resources from 'end of life' products. Pyrolysis and gasification are emerging thermal treatments that work under less drastic conditions in comparison with classic direct combustion, providing for reduced gaseous emissions of heavy metals. Moreover, they allow better recovery efficiency since the process by-products can be used as fuels (gas, oils), for both conventional (classic engines and heaters) and high efficiency apparatus (gas turbines and fuel cells), or alternatively as chemical sources or as raw materials for other processes. This paper presents a comparative study of a steam gasification process applied to three different waste types (refuse-derived fuel, poplar wood and scrap tyres), with the aim of comparing the corresponding yields and product compositions and exploring the most valuable uses of the by-products.

  15. Effects of weathering on coal and its sulfur constituents in refuse piles

    SciTech Connect (OSTI)

    Khan, L.A.; Berggren, D.J.; Hughes, R.E.

    1984-12-01

    The rejects from coal mining and processing operations are intensively weathered in refuse piles. The effects of weathering on coal and and its associated sulfur-containing compounds are economically and environmentally significant. Chemical and x-ray diffraction analyses of material from abandoned mined lands, collected for a study of historic long-wall mines in Illinois, showed that most pyrite in weathered samples is converted to gypsum, jarosite, and minor alunite. There were only small reductions in the trace element concentrations of these samples. Coal readily takes up oxygen from air. Coal-oxygen complexes produced by oxygen adsorption or peroxide formation are very unstable, and the oxygen can be removed as oxygen gas, CO/sub 2/, or H/sub 2/O upon heating and evacuation. Heating coal under partial vacuum decreases its surface charge. The decrease in surface charge increases with heating time and temperature. This suggests that the adverse effect of exposure to air may be partially reversed, with a corresponding gain in the efficiency of the coal recovery processes.

  16. Comminution phenomena during the fluidized bed combustion of a commercial refuse-derived fuel

    SciTech Connect (OSTI)

    Arena, U.; Cammarota, A.; Chirone, R.; D`Anna, G.

    1995-12-31

    A commercial densified refuse-derived fuel (RDF), obtained as pellets from municipal solid wastes, was burned in two laboratory scale bubbling fluidized bed combustors, having an internal diameter of 41 mm. The apparatus were both batchwise operated at 850 C by injecting batches of RDF particles into a bed of silica sand (300--400 {micro}m as size range) fluidized at a superficial gas velocity of 0.8 m/s. RDF particles with equivalent mean diameter ranging from 4 to 9 mm were used. Different experimental procedures were set up to separately investigate comminution phenomena of fuel particles. Results were compared with those obtained burning a South African bituminous coal. Results pointed out that RDF particles undergo a strong primary fragmentation phenomenon, with a probability of particle breakage equal to 1 for fuel particles larger than 6 mm. Attrition and char fragmentation phenomena are particularly relevant under both inert and oxidizing conditions, generating a large amount of unburned fines which may affect overall combustion efficiency.

  17. Design considerations and operating experience in firing refuse derived fuel in a circulating fluidized bed combustor

    SciTech Connect (OSTI)

    Piekos, S.J.; Matuny, M.

    1997-12-31

    The worldwide demand for cleaner, more efficient methods to dispose of municipal solid waste has stimulated interest in processing solid waste to produce refuse derived fuel (RDF) for use in circulating fluidized bed (CFB) boilers. The combination of waste processing and materials recovery systems and CFB boiler technology provides the greatest recovery of useful resources from trash and uses the cleanest combustion technology available today to generate power. Foster Wheeler Power Systems along with Foster Wheeler Energy Corporation and several other Foster Wheeler sister companies designed, built, and now operates a 1600 tons per day (TPD) (1450 metric tons) municipal waste-to-energy project located in Robbins, Illinois, a suburb of Chicago. This project incorporates waste processing systems to recover recyclable materials and produce RDF. It is the first project in the United States to use CFB boiler technology to combust RDF. This paper will provide an overview of the Robbins, Illinois waste-to-energy project and will examine the technical and environmental reasons for selecting RDF waste processing and CFB combustion technology. Additionally, this paper will present experience with handling and combusting RDF and review the special design features incorporated into the CFB boiler and waste processing system that make it work.

  18. Pilot scale production and combustion of liquid fuels from refuse derived fuel (RDF): Part 2

    SciTech Connect (OSTI)

    Klosky, M.K.

    1996-09-01

    EnerTech is developing a process for producing pumpable slurry fuels, comparable to Coal-Water-Fuels (CWF), from solid Refuse Derived Fuels (RDF). Previous reports have described the characteristics of the enhanced carbonized RDF slurry fuels. This paper summarizes those fuel characteristics and reports on the latest combustion tests performed with the final product fuel. The objective of this research was to determine the boiler and emission performance from the carbonized RDF slurry fuel using statistical screening experiments. Eight combustion tests were performed with a pilot scale pulverized coal/oil boiler simulator, with CO, SO{sub 2}, and NO{sub x} emissions determined on-line. The combustion tests produced simultaneous CO and NO{sub x} emissions well below and SO{sub 2} emissions comparable to the promulgated New Source Performance Standards (NSPS). This research will form the basis for later combustion experiments to be performed with the carbonized RDF slurry fuel, in which dioxin/furan and trace metal emissions will be determined.

  19. Superheater corrosion in a boiler fired with refuse-derived fuel

    SciTech Connect (OSTI)

    Blough, J.L.; Stanko, G.J.; Bakker, W.T.; Steinbeck, T.

    1995-12-31

    The environment in the superheater of a boiler firing refuse-derived fuel (RDF) is very aggressive. The high wastage rate for the standard T-22 material necessitated a materials testing program. Simples of Types 304H, HR3C, T-22 chromized, 825 and 625 were assembled into tubular test sections and welded into the superheater tubing. After 1,180 hours the test sections were evaluated and the wastage rates calculated for each material. The chlorides contained in the RDF are believed to be the primary corrodent. The chlorine may be interacting with the metal samples as HCl, a low-melting-point eutectic or a combination of these. Of the six materials tested, Alloy 625 exhibited the best resistance--substantially better than the next-best Type 304. Alloy 825 and HR3C corroded approximately 1.5 times the rate of Type 304. The chromized layer on T-22 showed no resistance to the environment and was consumed in large areas.

  20. Gasification of refuse derived fuel in the Battelle high throughput gasification system

    SciTech Connect (OSTI)

    Paisley, M.A.; Creamer, K.S.; Tweksbury, T.L.; Taylor, D.R. )

    1989-07-01

    This report presents the results of an experimental program to demonstrate the suitability of the Battelle High Throughput Gasification Process to non-wood biomass fuels. An extensive data base on wood gasification was generated during a multi-year experimental program. This data base and subsequent design and economic analysis activities led to the discussion to study the gasification character of other fuels. The specific fuel studied was refuse derived fuel (RDF) which is a prepared municipal solid waste (MSW). The use of RDF, while providing a valuable fuel, can also provide a solution to MSW disposal problems. Gasification of MSW provides advantages over land fill or mass burn technology since a more usable form of energy, medium Btu gas, is produced. Land filling of wastes produces no usable products and mass burning while greatly reducing the volume of wastes for disposal can produce only steam. This steam must be used on site or very nearby this limiting the potential locations for mass burn facilities. Such a gas, if produced from currently available supplies of MSW, can contribute 2 quads to the US energy supply. 3 refs., 12 figs., 7 tabs.

  1. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 6, January--March 1996

    SciTech Connect (OSTI)

    Pan, W.P.; Riley, J.T.; Lloyd, W.G.

    1996-02-29

    The objectives for this quarter of study on the co-firing of high sulfur coals with refuse derived fuels were two-fold. First, the effects of different experimental parameters such as temperature, flow rates and reaction times on the formation of chlorinated organic compounds were studied using the tubular furnace as a reactor followed by GC/MS analysis. Secondly, the effect of fuel/air ratio on the flue gas composition and combustion efficiency were studied with the AFBC system.

  2. NREL Evaluates Performance of Hydraulic Hybrid Refuse Vehicles (Fact Sheet), Highlights in Research & Development, NREL (National Renewable Energy Laboratory)

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    National Renewable Energy Laboratory (NREL) is evaluating the in-service performance of hydraulic hybrid vehicles (HHVs) and comparable conven- tional diesel vehicles operated by Miami- Dade County's Public Works and Waste Management Department in Florida. Launched in March 2015, the study aims to improve understanding of the overall usage and effectiveness of HHVs in refuse operation. The study was designed to help Miami- Dade County determine the ideal routes for maximizing the fuel-saving

  3. Assessment of the percent status of burning refuse-derived fuel as a fuel supplement in the cement kiln industry

    SciTech Connect (OSTI)

    1981-09-01

    The purpose of the project was to solicit information on the use of refuse-derived fuel (RDF) in cement kilns by survey, follow up the mailed survey with telephone calls to the recipients, and assemble collected information into a report. A list of companies that had some experience with RFD was compiled and is presented in Appendix A. The procedure for conducting the survey is explained. A copy of the questionnaire is presented in Appendix B. The letters of response are reproduced in Appendix C. Two completed forms were received and clear conclusions are summarized. The effort was terminated and no final report was assembled.

  4. Combustion characterization of coal/refuse derived fuels using thermogravimetric-fourier transform infrared-mass spectrometry

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Lu, Huagang; Hyatt, J.

    1995-12-31

    The fundamental thermal behavior of five materials (Illinois coal No. 6, Kentucky coal No. 9, polyvinyl chloride, cellulose, newspaper) has been investigated using the TGA/FTIR/MS system under the condition of combustion. The system was used to identify molecular chlorine, along with HCI, CO, CO{sub 2}, H{sub 2}O and various hydrocarbons in the gaseous products of the combustion of PVC resin in air. This is a significant finding that will lead us to examine this combustion step further to look for the formation of chlorinated organic compounds during co-firing of coal with refuse derived fuels.

  5. Coal-firing sulfur coal with refuse derived fuels. Technical progress report {number_sign}7, [April--June 1996

    SciTech Connect (OSTI)

    Pan, Wei-Ping, Riley, J.T.; Lloyd, W.G.

    1996-05-31

    The objectives for this quarter of study on the co-firing of high sulfur coal with refuse derived fuels project were two-fold. First, the organic compounds tentatively identified as combustion products in the previous report were confirmed by comparing retention times with pure samples. Secondly, a reduced amount of unburned carbon in the fly ash and an oxygen concentration at about 3--6% in the flue gases were achieved by the addition of removable heat exchange tubes in the AFBC system.

  6. Refuse-derived fuels in US Air Force heating and power systems. Final report, June 1982-February 1985

    SciTech Connect (OSTI)

    Joensen, A.W.

    1986-01-01

    This investigation was conducted to document and review all data associated with densified refuse-derived fuel (dRDF)--its preparation and properties, storage and handling, boiler cofiring efficiency and environmental emissions, potential boiler metal wastage, and any other experiences associated with the use of this fuel. The results of this investigation provide the basis for the development of an optimum dRDF fuel specification. These results identify performance characteristics and operating problems of the existing dRDF fuel pellet and contain an economic feasibility assessment of using this fuel.

  7. Feasibility Study of Economics and Performance of Solar Photovoltaics at the Refuse Hideaway Landfill in Middleton, Wisconsin

    SciTech Connect (OSTI)

    Salasovich, J.; Mosey, G.

    2011-08-01

    This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on a brownfield site at the Refuse Hideaway Landfill in Middleton, Wisconsin. The site currently has a PV system in place and was assessed for further PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.1333/kWh and incentives offered by the State of Wisconsin and by the serving utility, Madison Gas and Electric. According to the site production calculations, the most cost-effective system in terms of return on investment is the thin-film fixed-tilt technology. The report recommends financing options that could assist in the implementation of such a system.

  8. Methodology for modeling the devolatilization of refuse-derived fuel from thermogravimetric analysis of municipal solid waste components

    SciTech Connect (OSTI)

    Fritsky, K.J.; Miller, D.L.; Cernansky, N.P.

    1994-09-01

    A methodology was introduced for modeling the devolatilization characteristics of refuse-derived fuel (RFD) in terms of temperature-dependent weight loss. The basic premise of the methodology is that RDF is modeled as a combination of select municipal solid waste (MSW) components. Kinetic parameters are derived for each component from thermogravimetric analyzer (TGA) data measured at a specific set of conditions. These experimentally derived parameters, along with user-derived parameters, are inputted to model equations for the purpose of calculating thermograms for the components. The component thermograms are summed to create a composite thermogram that is an estimate of the devolatilization for the as-modeled RFD. The methodology has several attractive features as a thermal analysis tool for waste fuels. 7 refs., 10 figs., 3 tabs.

  9. Performance analysis of cofiring densified refuse derived fuel in a military boiler. Final report Aug 80-Sep 81

    SciTech Connect (OSTI)

    Not Available

    1981-12-01

    This report provides an overview of existing densified refuse-derived fuel (dRDF) receiving, storage, handling and combustion equipment at Wright-Patterson Air Foce Base. DRDF is being burned as part of a long term alternative fuel evaluation program to develop design and procurement criteria for multiple fuel boilers. Recommendations are offered for specific equipment, procedural changes, and studies to improve the efficacy of the present configurations of dRDF as a fuel. A discussion of the fuel use criteria is presented. The options for continuing the present dRDF supply arrangement vs. the feasibility of local production of dRDF are presented. Research needs are summarized. A preemptive, integrated local synthetic solid fuel production facility and boiler performance test is recommended as a continuation of the program.

  10. Study of organic compounds evolved during the co-firing of coal and refuse derived fuel using TG/MS

    SciTech Connect (OSTI)

    Puroshothama, Shobha; Lu, R.; Yang, Xiaodong

    1996-10-01

    The evolution of organic compounds during the combustion of carbonaceous fuel coupled with solid waste disposal and limited landfill space has been a cause for concern. Co-firing high sulfur coal with refuse derived fuel seems an attractive alternative technique to tackle the dual problem of controlling SO{sub x} emissions as well as those of the chlorinated organic toxins. The TG serves to emulate the conditions of the fluidized bed combustor and the MS serves as the detector for evolved gases. This versatile combination is used to study the decomposition pathway as well as predict the conditions at which various compounds are formed and may serve as a means of reducing the formation of these chlorinated organic compounds.

  11. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 8, July 1996--August 1996

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1996-08-31

    The objective of this study was to examine the possible formation of chlorinated organic compounds during the combustion of blends of refuse derived fuels (RDF) and coal under conditions similar to those of an atmospheric fluidized bed combustion (AFBC) system. A series of experiments were conducted using a TGA interfaced to FTIR. Additional experiments using a tube furnace preheated to AFBC operating temperatures were also conducted. The combustion products were cryogenically trapped and analyzed with a GC/MS system. The chlorination of phenols and the condensation reactions of chlorophenols were investigated in this study. A possible mechanism for the formation of chlorinated organic compounds such as dibenzodioxins and dibenzofurans, by chlorination and condensation reactions involving phenols, was proposed.

  12. Cellulose-Enriched Microbial Communities from Leaf-Cutter Ant (Atta colombica) Refuse Dumps Vary in Taxonomic Composition and Degradation Ability

    DOE PAGES-Beta [OSTI]

    Lewin, Gina R.; Johnson, Amanda L.; Soto, Rolando D. Moreira; Perry, Kailene; Book, Adam J.; Horn, Heidi A.; Pinto-Tomás, Adrián A.; Currie, Cameron R.

    2016-03-21

    Deconstruction of the cellulose in plant cell walls is critical for carbon flow through ecosystems and for the production of sustainable cellulosic biofuels. Our understanding of cellulose deconstruction is largely limited to the study of microbes in isolation, but in nature, this process is driven by microbes within complex communities. In Neotropical forests, microbes in leaf-cutter ant refuse dumps are important for carbon turnover. These dumps consist of decaying plant material and a diverse bacterial community, as shown here by electron microscopy. To study the portion of the community capable of cellulose degradation, we performed enrichments on cellulose using materialmore » from five Atta colombica refuse dumps. The ability of enriched communities to degrade cellulose varied significantly across refuse dumps. 16S rRNA gene amplicon sequencing of enriched samples identified that the community structure correlated with refuse dump and with degradation ability. Overall, samples were dominated by Bacteroidetes, Gammaproteobacteria, and Betaproteobacteria. Half of abundant operational taxonomic units (OTUs) across samples were classified within general containing known cellulose degraders, including Acidovorax, the most abundant OTU detected across samples, which was positively correlated with cellulolytic ability. Lastly, a representative Acidovorax strain was isolated, but did not grow on cellulose alone. Phenotypic and compositional analyses of enrichment cultures, such as those presented here, help link community composition with cellulolytic ability and provide insight into the complexity of community-based cellulose degradation.« less

  13. Heavy-Duty Waste Hauler with Chemically Correct Natural Gas Engine...

    Alternative Fuels and Advanced Vehicles Data Center

    ... rpm * Turbocharger: Holset HY 40V VGT. Water-cooled bearing housing * Low-pressure, ... compressor inlet temperature to prevent water from dropping out before the turbocharger ...

  14. Industrial innovations for tomorrow: Advances in industrial energy-efficiency technologies. Commercial power plant tests blend of refuse-derived fuel and coal to generate electricity

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    MSW can be converted to energy in two ways. One involves the direct burning of MSW to produce steam and electricity. The second converts MSW into refuse-derived fuel (RDF) by reducing the size of the MSW and separating metals, glass, and other inorganic materials. RDF can be densified or mixed with binders to form fuel pellets. As part of a program sponsored by DOE`s Office of Industrial Technologies, the National Renewable Energy Laboratory participated in a cooperative research and development agreement to examine combustion of binder-enhanced, densified refuse-derived fuel (b-d RDF) pellets with coal. Pelletized b-d RDF has been burned in coal combustors, but only in quantities of less than 3% in large utility systems. The DOE project involved the use of b-d RDF in quantities up to 20%. A major goal was to quantify the pollutants released during combustion and measure combustion performance.

  15. Design, operation, and performance of a modern air pollution control system for a refuse derived fuel combustion facility

    SciTech Connect (OSTI)

    Weaver, E.H.; Azzinnari, C.

    1997-12-01

    The Robbins, Illinois refuse derived fuel combustion facility was recently placed into service. Large and new, the facility is designed to process 1600 tons of waste per day. Twenty-five percent of the waste, or 400 tons per day, is separated out in the fuel preparation process. The remaining 1200 tons per day is burned in two circulating fluidized bed boilers. The system is designed to meet new source performance standards for municipal waste combustion facilities, including total particulate, acid gases (HCl, SO{sub 2}, HF), heavy metals (including mercury), and dioxins. The system utilizes semi-dry scrubbers with lime and activated carbon injected through dual fluid atomizers for control of acid gases. Final polishing of acid gas emissions, particulate control, heavy metals removal, and control of dioxins is accomplished with pulse jet fabric filters. This paper discusses the design of the facility`s air pollution control system, including all auxiliary systems required to make it function properly. Also discussed is the actual operation and emissions performance of the system.

  16. Comparison of coal/solid recovered fuel (SRF) with coal/refuse derived fuel (RDF) in a fluidised bed reactor

    SciTech Connect (OSTI)

    Wagland, S.T.; Kilgallon, P.; Coveney, R.; Garg, A.; Smith, R.; Longhurst, P.J.; Pollard, S.J.T.; Simms, N.

    2011-06-15

    An experimental study was undertaken to compare the differences between municipal solid waste (MSW) derived solid recovered fuel (SRF) (complying with CEN standards) and refuse derived fuel (RDF). Both fuels were co-combusted with coal in a 50 kW fluidised bed combustor and the metal emissions were compared. Synthetic SRF was prepared in the laboratory by grinding major constituents of MSW such as paper, plastic, textile and wood. RDF was obtained from a local mechanical treatment plant. Heavy metal emissions in flue gas and ash samples from the (coal + 10% SRF) fuel mixture were found to be within the acceptable range and were generally lower than that obtained for coal + 10% RDF fuel mixture. The relative distribution of heavy metals in ash components and the flue gas stream shows the presence of a large fraction (up to 98%) of most of the metals in the ash (except Hg and As). Thermo-gravimetric (TG) analysis of SRF constituents was performed to understand the behaviour of fuel mixtures in the absence and presence of air. The results obtained from the experimental study will enhance the confidence of fuel users towards using MSW-derived SRF as an alternative fuel.

  17. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 5, [October--December 1995

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1995-11-30

    Studies involving the tubular furnace are in the process of identifying the ideal experimental coal-to-refuse derived fuel(RDF) ratio for use in the AFBC system. A series of experiments with this furnace has been performed to determine the possible chemical pathway for formation of chlorinated organic compounds during the combustion of various RDF sources. Phenol and chlorine appear to be likely reactants necessary for the formation of these compounds. The main goal of these experiment is to determine the exact experimental conditions for the formation of chlorinated organic compounds, as well as methods to inhibit their development. Work on the fluidized bed combustor has involved five combustion runs, in which a combustion efficiency of greater than 96% and with a consistent CO{sub 2} concentration of approximately 13% was obtained. Modifications responsible for these improvements include the addition of the underbed fuel feed system and revision of the flue gas sampling system. New methods of determining combustion efficiency and percentage of SO{sub 2} capture using TG techniques to analyze combustion products are being developed. The current outlook using this TGA/FTIR method is very promising, since previously obscured reactions are being studied. the analysis of combustion products is revealing a more complete picture of the combustion process within the AFBC system.

  18. Vehicle Technologies Office: Natural Gas Vehicle Research and Development

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    (R&D) | Department of Energy Alternative Fuels » Vehicle Technologies Office: Natural Gas Vehicle Research and Development (R&D) Vehicle Technologies Office: Natural Gas Vehicle Research and Development (R&D) Natural gas offers opportunities for reducing the use of petroleum in transportation, especially in medium- and heavy-duty vehicles. These fleets, which include a variety of vehicles such as transit buses, refuse haulers, delivery trucks, and long-haul trucks, currently

  19. Alternative Fuels Data Center

    Alternative Fuels and Advanced Vehicles Data Center

    Fleet Emissions Reduction Requirements - South Coast The South Coast Air Quality Management District (SCAQMD) requires government fleets and private contractors under contract with public entities to purchase non-diesel lower emission and alternative fuel vehicles. The rule applies to transit bus, school bus, refuse hauler, and other vehicle fleets of at least 15 vehicles that operate in Los Angeles, San Bernardino, Riverside, and Orange counties. (Reference SCAQMD Rules 1186.1 and 1191-1196)

  20. Studies of the combustion of coal/refuse derived fuels using thermogravimetric-Fourier transform infrared-mass spectrometry

    SciTech Connect (OSTI)

    Lu, Huagang; Li, Jigui; Lloyd, W.G.

    1995-11-01

    According to a report of the Environmental Protection Agency (EPA), `Characterization of Municipal Solid Waste (MSW) in the United States`, the total MSW produced in the U.S. increased from 179 million tons in 1988 to 195 million tons in 1990. The EPA predicted that the country would produce about 216 million tons of garbage in the year 2000. The amount of waste generated and the rapidly declining availability of sanitary landfills has forced most municipalities to evaluate alternative waste management technologies for reducing the volume of waste sent to landfills. The fraction of MSW that is processed by such technologies as separation and recycling, composting, and waste-to-energy was forecast to increase from a few percent today to 30-40% by the year 2000. Waste-to-energy conversion of MSW can appear to be attractive because of the energy recovered, the economic value of recycled materials, and the cost savings derived from reduced landfill usage. However, extra care needs to be taken in burning MSW or refuse-derived fuel (RDF) to optimize the operating conditions of a combustor so that the combustion takes place in an environmentally acceptable manner. For instance, polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) have been found in the precipitator fly ash and flue gas of some incinerator facilities in the United States and Europe. The amount of PCDDs and PCDFs occurs only in the parts-per-billion to parts-per-trillion range, but these chlorinated organics exhibit very high toxicity (LD{sub 50} < 10 {mu}g/Kg). The compound 2,3,7,8-tetrachlorodibenzodioxin has been found to be acnegenic, carcinogenic, and teratogenic. This has slowed or even stopped the construction and operation of waste-to-energy plants.

  1. applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    FEL Industrial Uses Laser glaze and anneal surfaces Carburize and nitride surfaces Create 3D patterns for Micro-Electro-Mechanical no dark Systems Surface Processing Microfabrication Investigate mechanisms for photodynamic cancer therapy FEL Medical Uses Light Therapy Evaluate the potential use of Terahertz light for applications such as land mine detection Defend Navy fleets using infrared light Fabricate ceramic components for miniature satellites using ultraviolet FEL light FEL Defense Uses

  2. Characterization of ashes from co-combustion of refuse-derived fuel with coal, wood and bark in a fluidized bed

    SciTech Connect (OSTI)

    Zevenhoven, R.; Skrifvars, B.J.; Hupa, M.

    1998-12-31

    The technical and environmental feasibility of co-combustion of a recovered fuel (RF) prepared from combustible waste fractions (separated at the source), together with coal, peat, wood or wood-waste in thermal power/electricity generation has been studied in several R and D projects within Finland. The current work focuses on eventual changes in ash characteristics during co-combustion of RF with coal, wood or bark, which could lead to bed agglomeration, slagging, fouling and even corrosion in the boiler. Ashes were produced in a 15 kW bubbling fluidized bed (BFB) combustion reactor, the fly ash captured by the cyclone was further analyzed by XRF. The sintering tendency behavior of these ashes was investigated using a test procedure developed at Aabo Akademi University. Earlier, a screening program involved ashes from RF (from a waste separation scheme in Finland) co-combustion with peat, wood and bark, in which ash pellets were thermally treated in air. This showed significant sintering below 600 C as well as above 800 C for RF/wood and RF/bark, but not for RF/peat. This seemed to correlate with alkali chloride and sulfate concentrations in the ashes. The current work addresses a Danish refuse-derived fuel (RDF), co-combusted with bark, coal, bark+coal, wood, and wood+coal (eight tests). Ash pellets were thermally treated in nitrogen in order to avoid residual carbon combustion. The results obtained show no sintering tendencies below 600 C, significant changes in sintering are seen with pellets treated at 1,000 C. Ash from 100% RDF combustion does not sinter, 25% RDF co-combustion with wood and peat, respectively, gives an insignificant effect. The most severe sintering occurs during co-combustion of RDF with bark. Furthermore, it appears that the presence of a 25% coal fraction (on energy basis) seems to have a negative effect on all fuel blends. Analysis of the sintering results versus ash chemical composition shows that, in general, an increased level of

  3. Production development and utilization of Zimmer Station wet FGD by-products. Final report. Volume 4, A laboratory study conducted in fulfillment of Phase 2, Objective 1 titled. Inhibition of acid production in coal refuse amended with calcium sulfite and calcium sulfate - containing FGD solids

    SciTech Connect (OSTI)

    Hao, Y. L.; Dick, W. A.; Stehouwer, R. C.; Bigham, J. M.

    1998-06-30

    Control of S02 emission from coal combustion requires desulfurization of coal before its combustion to produce coal refuse. Alternatively, gaseous emissions from coal combustion may be scrubbed to yield flue gas desulfurization (FGD) by-products that include calcium sulfite (CaSO3∙0.5H2O or simply CaS03). Acid production in coal refuse due to pyrite oxidation and disposal of large amounts of FGD can cause environmental degradation. Addition of CaS03 and CaS03-containing FGD to coal refuse may reduce the amounts of oxygen and ferric ion available to oxidize pyrite because the sulfite moiety in CaS03 is a strong reductant and thus may mitigate acid production in coal refuse. In Chapter 1, it was shown that CaS03 efficiently scavenged dissolved oxygen and ferric ion in water under the conditions commonly encountered in a coal refuse disposal environment. In the presence ofCaS03, the concentration of dissolved oxygen in water exposed to the atmosphere declined to below 0.01 mg L"1 at pH <8.0. In Chapter 2, it was demonstrated that CaS03 prevented a pH drop in coal refuse slurry when 0.2 gCaS03 was added to a 2% fresh coal refuse slurry every three days. Calcium sulfite also inhibited acid leaching from fresh coal refuse in bench-scale columns under controlled conditions. During the initial 13 weeks of leaching, the total amounts of titratable acidity, soluble H\\ Fe, and Al from CaS03-treated refuse (6.4 gin 50 g fresh coal refuse) were only 26%,10%, 32%, and 39% of those of the control columns, respectively. A combination of CaS03 with CaC03 or fly ash enhanced the inhibitory effect of CaS03 on acid leaching. Calcium sulfite-containing FGD which combined CaS03, CaC03, fly ash, and gypsum showed a much stronger inhibitory effect on acid leaching than CaS03 alone. This

  4. National incinerator testing and evaluation program: The environmental characterization of refuse-derived fuel (RDF) Combustion Technology, Mid-Connecticut Facility, Hartford, Connecticut. Final report, June 1987-March 1993

    SciTech Connect (OSTI)

    Finklestein, A.; Klicius, R.D.

    1994-12-01

    The report gives results of an environmental characterization of refuse-derived (RDF) semi-suspension burning technology at a facility in Hartford, Connecticut, that represents state-of-the-art technology, including a spray dryer/fabric filter flue-gas cleaning (FGC) system for each unit. Results were obtained for a variety of steam production rates, combustion conditions, flue gas temperatures, and acid gas removal efficiencies. All incoming wastes and residue streams were weighed, sampled, and analyzed. Key combustor and FGC system operating variables were monitored on a real time basis. A wide range of analyses for acid gases, trace organics, and heavy metals was carried out on gas emissions and all ash residue discharges.

  5. Co-firing a pressurized fluidized-bed combustion system with coal and refuse derived fuels and/or sludges. Task 16

    SciTech Connect (OSTI)

    DeLallo, M.; Zaharchuk, R.

    1994-01-01

    The co-firing of waste materials with coal in utility scale power plants has emerged as an effective approach to produce energy and manage municipal waste. Leading this approach, the atmospheric fluidized-bed combustor (AFBC) has demonstrated its commercial acceptance in the utility market as a reliable source of power burning a variety of waste and alternative fuels. The fluidized bed, with its stability of combustion, reduces the amount of thermochemical transients and provides for easier process control. The application of pressurized fluidized-bed combustor (PFBC) technology, although relatively new, can provide significant enhancements to the efficient production of electricity while maintaining the waste management benefits of AFBC. A study was undertaken to investigate the technical and economic feasibility of co-firing a PFBC with coal and municipal and industrial wastes. Focus was placed on the production of electricity and the efficient disposal of wastes for application in central power station and distributed locations. Wastes considered for co-firing include municipal solid waste (MSW), tire-derived fuel (TDF), sewage sludge, and industrial de-inking sludge. Issues concerning waste material preparation and feed, PFBC operation, plant emissions, and regulations are addressed. This paper describes the results of this investigation, presents conclusions on the key issues, and provides recommendations for further evaluation.

  6. Utilization of CFB fly ash for construction applications

    SciTech Connect (OSTI)

    Conn, R.E.; Sellakumar, K.; Bland, A.E.

    1999-07-01

    Disposal in landfills has been the most common means of handling ash in circulating fluidized bed (CFB) boiler power plants. Recently, larger CFB boilers with generating capacities up to 300 MWe are currently being planned, resulting in increased volumes and disposal cost of ash by-product. Studies have shown that CFB ashes do not pose environmental concerns that should significantly limit their potential utilization. Many uses of CFB ash are being investigated by Foster Wheeler, which can provide more cost-effective ash management. Construction applications have been identified as one of the major uses for CFB ashes. Typically, CFB ash cannot be used as a cement replacement in concrete due to its unacceptably high sulfur content. However, CFB ashes can be used for other construction applications that require less stringent specifications including soil stabilization, road base, structural fill, and synthetic aggregate. In this study, potential construction applications were identified for fly ashes from several CFB boilers firing diverse fuels such as petroleum coke, refuse derived fuel (RDF) and coal. The compressive strength of hydrated fly ashes was measured in order to screen their potential for use in various construction applications. Based on the results of this work, the effects of both ash chemistry and carbon content on utilization potential were ascertained. Actual beneficial uses of ashes evaluated in this study are also discussed.

  7. Case Study - Compressed Natural Gas Refuse Fleets

    Alternative Fuels and Advanced Vehicles Data Center

    CNG ........................................................................................................................................ 4 Financial Benefits ........................................................................................................................................................... 4 Environment and Energy Benefits .............................................................................................................................. 4 Other Benefits

  8. Special Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Capabilities » Special Applications Special Applications Special Applications sensors in action-aerospace, climate, energy, space. Special Applications: Aerospace, Climate, Energy, and Space Capabilities-for Collaboration View our capability sheets: get details of what we do. Optimized Sensing Networking Design Steady State Acoustic Wavenumber Spectromer How we deploy innovation special applications bubble Los Alamos National Laboratory invented swept frequency acoustic interferometry (SFAI) to

  9. Applicant Information

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Applicant Information General Information for Applicants Bringing together top, space science students with internationally recognized researchers at Los Alamos in an educational...

  10. Laser applications

    SciTech Connect (OSTI)

    Edelson, M.C. )

    1989-11-01

    The breadth of current applications of laser technology is described. It is used as the basis for extrapolating to future application in such activities as AVLIS, SIS, ICP-MS, and RIMs.

  11. Application Components

    Energy.gov [DOE]

    A complete application consists of the following documents. Use this checklist to keep track of the required documents.

  12. Renewal Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Renewal Individual Permit Renewal Application The Permit expires March 31, 2014 and existing permit conditions will be in effect until a new permit is issued. The Permittees submitted a renewal application to EPA on March 27, 2014. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Individual Permit Renewal Application February 10, 2015 NPDES Permit No. NM0030759, Supplemental Information for Permit Renewal Application

  13. Mathematical Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Math Mathematical Applications Mathematica Mathematica is a fully integrated environment for technical computing. It performs symbolic manipulation of equations, integrals, ...

  14. Biological Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Biological Applications Biological Applications Bioscience technologies for biosecurity, infectious disease, and other threats. Bioscience Capabilities-for Collaboration View our capability sheets: get details of what we do. Atomic Magnetometer Micro Imaging MOL PCR Raman LIBS Waveguide Biosensor How we deploy innovation bioscience-foundational-science Cell biology hasn't been the same since Los Alamos pioneered flow cytometry in mid-1960s when a Lab scientist invented a cell separator that

  15. Application Acceleration

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Department of Energy Services » Diversity and Inclusion » Employee Resource Groups » Application & Guidelines for Chartering an Employee Resource Group Application & Guidelines for Chartering an Employee Resource Group Employee Resource Groups (ERGs) are grassroots groups formed by employees across all demographics-race, national origin, gender, sexual orientation, disability, education, geography, military status, occupation, energy field, etc. ERGs are established by submission

  16. Ridefinders Application

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    23 (05-92) Ridefinders Application Please submit this application to the U.S. Department of Energy (DOE) Employee Transportation Coordinator, Room 7A-156, Forrestal. U.S. Department of Energy Privacy Act Statement Check all transportation options which interest you: Carpool: Driver Share Driving Rider Vanpool: Driver Share Driving Rider Do you wish to meet your pool in your neighborhood? No (If no, see Alternate Pickup Locations below.) Yes Participation in the Federal Facility Ridesharing

  17. TITLE XVII APPLICATION PORTAL

    Energy.gov [DOE]

    The Title XVII online application portal guides users through the Title XVII loan guarantee application process.

  18. Combustion rates of chars from high-volatile fuels for FBC application

    SciTech Connect (OSTI)

    Masi, S.; Salatino, P.; Senneca, O.

    1997-12-31

    The fluidized bed combustion of high volatile fuels is often associated with huge occurrence of comminution phenomena. These result into in-bed generation of substantial amounts of carbon fines which further undergo competitive processes of combustion and elutriation. The small size of carbon fines generated by comminution is such that their further combustion is largely controlled by the intrinsic kinetics of carbon oxidation, alone or in combination with intraparticle diffusion. The competition between fine combustion and elutriation strongly affects the efficiency of fixed carbon conversion and calls for thorough characterization of the combustion kinetics and of residence times of fines in a fluidized bed of coarse solids. In this paper a collection of intrinsic combustion kinetic and porosimetric data for chars from three high-volatile fuels suitable for FBC application is presented. Chars from a Refuse Derived Fuel (RDF), a Tyre Derived Fuel (TDF) and a biomass (Robinia Pseudoacacia) are obtained from devolatilization, in fluidized bed, of fuel samples. Thermogravimetric analysis, mercury porosimetry and helium pycnometry are used to characterize the reactivity and the pore structure of the chars. Combustion rates are characterized over a wide range of temperatures (320--850 C) and oxygen partial pressures, covering the entire range of interest in fluidized bed combustion. Analysis of thermogravimetric and porosimetric data is directed to obtaining the parameters (pre-exponential factors, reaction orders, activation energies, intraparticle diffusivities) of combustion kinetic submodels for application in fluidized bed combustor modeling.

  19. POTENTIAL APPLICATIONS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    POTENTIAL APPLICATIONS  Bio-fuel production  Hydrogen generation  Direct coal liquefaction  Oil refining TECHNOLOGICAL BENEFITS  Uniformly allows specially tunable reactions  The next generation of fuel cell synthesis points towards growing trend in these "workhorse" catalysts  Provides greater efficiency through nanomaterials Transition Metal Sulfides (TMS), such as molybdenum disulfide (MoS₂), are the petroleum industry's "workhorse" catalysts for

  20. Chemistry Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Chemistry Chemistry Applications Gaussian 09 Gaussian 09 is a connected series of programs for performing semi-empirical, density functional theory and ab initio molecular orbital calculations. Read More » GAMESS GAMESS (General Atomic and Molecular Electronic Structure System) is a general ab initio quantum chemistry package. Read More » AMBER AMBER (Assisted Model Building with Energy Refinement) is the collective name for a suite of programs designed to carry out molecular dynamics

  1. Laboratory Applications

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Laboratory Applications What are contaminants normally found in hydrogen from fueling nozzle? JP Hsu SmartChemistry.com Particulates are most common found in Hydrogen - 96% hydrogen fuel contains particulates in 108 Particulate Samplings. Typical Particulate filter - 0.035mg/kg SmartChemistry.com H 2 Station X Particulate Sample Particulate Concentration at 700 Bar: 2.0 mg/kg Particulate filter after sampling, in which 4.001mg particulates are found in 2 kilogram hydrogen SmartChemistry.com H 2

  2. DOE Bestows 5 Honors on EM in Esteemed Awards Program | Department...

    Office of Environmental Management (EM)

    ... Secretary's Honor Awards: Recognizing Employee Excellence This cylinder hauler at Paducah's Babcock & Wilcox Conversion Services plant delivers the first of DOE's 14-ton depleted ...

  3. Alternative Fuels Data Center: Virginia Transportation Corporation...

    Alternative Fuels and Advanced Vehicles Data Center

    Virginia Transportation Corporation Runs Vehicle Haulers in Alabama on Natural Gas to someone by E-mail Share Alternative Fuels Data Center: Virginia Transportation Corporation ...

  4. Microsoft Word - Document1

    National Nuclear Security Administration (NNSA)

    ... Trucks cover a wide range of vehicles, from lightly loaded vans and panel trucks to the most heavily loaded coal, timber, and gravel haulers. An individual truck's operational ...

  5. NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure

    Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  6. NJ Compressed Natural Gas Refuse Trucks, Shuttle Buses and Infrastructure

    Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  7. Fleet DNA Project Data Summary Report for Refuse Trucks

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    80% 100% of Vehicles Reporting: 39 of Days Included: 387 Generated: Thu Aug 07, 2014 62 16 30 31 61 Deployment ID 0 5 10 15 20 25 30 35 39 Number of Vehicles Breakdown of ...

  8. PNNL VOLTTRON Application Development

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    by PNNL Apps Walkthrough of an Application Development Lessons Learned Concluding Remarks 3 Application Development Environment and Language Support VOLTTRON is a native Linux ...

  9. Application Porting and Performance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    In the web pages that follow we document strategies for improving your application's ... if your application is memory bandwidth bound, memory latency bound or compute bound. ...

  10. Natural Gas Applications

    Annual Energy Outlook

    Gas Applications. If you need assistance viewing this page, please call (202) 586-8800. Energy Information Administration Home Page Home > Natural Gas > Natural Gas Applications...

  11. ORISE: Multimedia Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Multimedia Applications Multimedia Applications The Oak Ridge Institute for Science and Education (ORISE) collaborates with government agencies and organizations to develop ...

  12. Alaska START Application

    Energy.gov [DOE]

    Download the application for the START Program for Community Energy Planning and Projects–Round Three.

  13. Postdoc Application Process

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Program » Application Process Postdoc Application Process Point your career towards Los Alamos: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Submit general application or apply for specific posted position For initial consideration, you can submit a general application to the Postdoctoral Research program and/or for a specific posted position. Access the general application or view specific posted postdoc

  14. Science of Signatures Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    of Signatures Advanced Studies Institute Application Form Do not use MAC Preview tool to edit this form as it corrupts the data. Application deadline is February 21, 2016 5:00 PM (US Mountain Standard) A complete application package includes: * This Application Form * Cover Letter - 1 page cover letter describing your describing your interest in participating as an Advanced Studies Scholar and of your professional goals. * CV (resume) * One (1) Letter of Recommendation from a Reference Applicant

  15. Pending Applications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Services Electricity Policy Coordination and Implementation International Electricity Regulation Pending Applications Pending Applications Pending Export Authorization ...

  16. Applications of Parallel Computers

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Computers Applications of Parallel Computers UCB CS267 Spring 2015 Tuesday & Thursday, 9:30-11:00 Pacific Time Applications of Parallel Computers, CS267, is a graduate-level course...

  17. Los Alamos Dynamics Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Los Alamos Dynamics Summer School Application Form Do not use MAC Preview tool to edit this form as it corrupts the data. Application deadline is January 10, 2016 5:00 PM (US Mountain Standard) A complete application package includes: * This Application Form * Cover Letter - Page cover letter describing your interest in this summer school and multi-disciplinary cyber- physical dynamic systems research as well as your near term (1-3 year) academic and professional goals. * CV (resume) * One (1)

  18. Profiling Your Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Profiling Your Application Profiling Your Application Introduction By quantifying the performance of your application on present-day architectures, you will be better able to prioritize, plan, and implement code changes that will enable good performance on Cori. Here, we provide general background on application profiling, as well as links to resources and tools available at NERSC to assist you in this effort. Background Of the platforms available at NERSC, we recommend profiling on Edison and

  19. Student Volunteer Internship Application

    Office of Energy Efficiency and Renewable Energy (EERE)

    U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy Student Volunteer Internship Program application.

  20. Microsoft Word - applications_2

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    applications program at ATLAS and CARIBU Dr. Libby McCutchan, Dr. Philippe Collon Presenters at the ATLAS user meeting: Extreme Materials, Development of fast-release solid catchers for rare-isotopes, The development of a new production capability for 211At - J. Nolen Improving Superconductors with Heavy-ion Irradiation - U. Welp CARIBU for Applications - J. Clark Beta-decay spectroscopy for applications - N. Scielzo Applications Nuclear Data Needs - A.A. Sonzogni AMS at ATLAS - R. Pardo

  1. Early application case studies

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Early application case studies Early application case studies The Babbage test system was used to study representative applications and kernels in various scientific fields to gain experience with the challenges and strategies needed to optimize code performance on the MIC architecture. Below we highlight a few examples: BerkeleyGW The BerkeleyGW package is a materials science application that calculates electronic and optical properties with quantitative accuracy, a critical need in materials

  2. Fundamental Science Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Fundamental Science Applications Fundamental Science Applications Supporing research to understand, predict and ultimately control matter and energy at the electronic, atomic, and molecular levels. Contact thumbnail of Business Development Executive Don Hickmott Business Development Executive Richard P. Feynman Center for Innovation (505) 667-8753 Email Fundamental Science Applications The DOE Basic Energy Science (BES) program supports research to understand, predict and ultimately control

  3. ERIP application instructions

    SciTech Connect (OSTI)

    Watt, D.M.

    1992-01-02

    This report provides background information and instructions to assist applicants in writing Energy-Related Inventions Program (ERIP) applications. Initial feedback fro usage for the new instructions shows that the best instructions would not be read and followed by all applicants. Applications from more than thirty applicants who have received the new instructions indicated that few had read the instructions. Based on this feedback, the instructions have been further revised to include a title page and table of contents. A warning was also added to advise applicants of the potential penalty of delayed review if these instructions are not followed. This revision was intended to address the possibility that some applicants did not see or bother to follow the instructions which followed the background information about ERIP. Included are two examples of ERIP applications which have been prepared for handout at workshops or mailing to applicants. Writing of example applications was time consuming and more difficult than expected for several reasons: (1) Full disclosures can be lengthy, very detailed, and technical. This contrasts with the desire to prepare examples which are comparatively short and easy for the non-technical person to read. (2) Disclosures contain confidential information which should not be published. (3) It is difficult to imagine that applicants will study examples when they do not bother to read the basic instructions.

  4. Application Process | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Prospective applicants may use the LPO Online Application Portal to apply to both loan ... Apply Now The LPO Online Application Portal guides users through the loan and loan ...

  5. Web Applications for Data Analytics

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Web Applications for Data Web Applications for Data Analytics Description and Overview NERSC is providing, on an experimental basis, web-based applications for data analytics. This ...

  6. LNG -- A paradox of propulsion potential

    SciTech Connect (OSTI)

    McKay, D.J.

    1995-12-31

    Liquefied natural gas (LNG) has been demonstrating its viability as a clean-burning alternative fuel for buses and medium- and heavy-duty trucks for the past 30 years. The first known LNG vehicle project began in San Diego in 1965, When San Diego Gas and Electric converted 22 utility trucks and three passenger vehicles to dedicated LNG. A surge in LNG vehicle project activity over the past five years has led to a fairly robust variety of vehicles testing the fuel, from Class 8 tractors, refuse haulers and transit buses to railroad locomotives and ferry boats. Recent technology improvements in engine design, cryogenic tanks, fuel nozzles and other related equipment have made LNG more practical to use than in the 1960s. LNG delivers more than twice the driving range from the same-sized fuel tank as a vehicle powered by compressed natural gas (CNG). Although technical and economic hurdles must be overcome before this fuel can achieve widespread use, various ongoing demonstration projects are showing LNG`s practicality, while serving the vital role of pinpointing those areas of performance that are the prime candidates for improvement.

  7. Technical applications of aerogels

    SciTech Connect (OSTI)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  8. Exploiting chaos for applications

    SciTech Connect (OSTI)

    Ditto, William L.; Sinha, Sudeshna

    2015-09-15

    We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

  9. SAGE Application Process

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Process SAGE Application Process A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Reinhard Friedel-Los Alamos SAGE Co-Director W. Scott Baldridge-Los Alamos SAGE Co-Director Larry Braile-Purdue University Professional Staff Assistant Georgia Sanchez (505) 665-0855 U.S. undergraduates Online Application Form (pdf) one (1) letter of interest two (2) references - use Reference Form (pdf) complete transcripts (unofficial is

  10. Radiological/Nuclear Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Radiological/Nuclear Applications Radiological/Nuclear Applications Radiological sensors in action, solutions for you. Radiological and Nuclear Capabilities-for Collaboration View our capability sheets: get details of what we do. Boron 10 Neutron Detector New Neutron Detector Materials How we deploy innovation radiiological-nuclear bubble In the mid-1990s, Los Alamos scientists were developing proton radiography techniques for a variety of applications and decided to try using muons instead of

  11. Materials Physics and Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ADEPS » MPA Materials Physics and Applications We develop new technologies that solve pressing national energy and security challenges by exploring and exploiting materials and their properties; developing practical applications of materials, and providing world-class user facilities. Contact Us Division Leader Tanja Pietrass Email Deputy Division Leader Rick Martineau Email Chief of Staff Jeff Willis Email Division Office (505) 665-1131 Materials Physics Applications Division Materials Physics

  12. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    1 Grant # DE-NA0002905 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to Ohio University for scientific research related to Studies in Low-Energy

  13. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    3 Grant # DE- NA0002793 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to Duke University for scientific research related to Photo-Fission Product

  14. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    9 Grant # DE-NA0002911 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to the University of Illinois, Urbana-Champaign for scientific research related

  15. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    4 Grant # DE-NA0002920 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to Clemson University for scientific research related to Robust Extractive

  16. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    7 Grant # DE-NA0002928 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to the University of Alabama at Birmingham for scientific research related to

  17. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    6 Grant # DE-NA0002931 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to the University of Kentucky Research Foundation and sub-awardee University of

  18. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    0 Grant # DE-NA0002847 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to the Michigan State University for scientific research related to Microscopic

  19. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    5 Grant # DE-NA0002909 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to The Regents of the University of California, Santa Barbara for scientific

  20. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    1 Grant # DE-NA0002919 Application of DOE NEPA Procedure: Categorical Exclusions A1 and A9, Applicable to General Agency Actions (10 CFR Part 1021, Subpart D, Appendix A) and Categorical Exclusion B3.6, Applicable to Specific Agency Actions (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA) proposes to provide financial assistance to Case Western Reserve University (CWRU) for scientific research related to

  1. New Combined FAC Application

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Washington, DC 20585 MEMORANDUM FOR SITE ACQUISITION CAREER MANAGER FROM: SUBJECT: Application for In accordance with DOE Order 361.1B, paragraph 4.B, I hereby request the subject certification, for which I completed the applicable education, experience and training standards as documented below. 1. E-mail address: Duty station: 2. Previous certification (attached): Date last issued or renewed: 3. Education (FAC-C applications only): Bachelor's degree OR 24 semester hours among these

  2. Application Process and Eligibility

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Program » Application Process and Eligibility Application Process and Eligibility Both US and non-US citizens are eligible to apply, but US citizenship may be required for some research. Contacts Director Albert Migliori Deputy Franz Freibert 505 667-6879 Email Professional Staff Assistant Susan Ramsay 505 665 0858 Email Applications for the program shall consist of a clearly defined research proposal of up to 300 words, written by the sponsor, describing the candidate's proposed research in

  3. Application Porting and Performance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    opportunities, and manage multiple hierarchies of memory effectively. In the web pages that follow we document strategies for improving your application's performance....

  4. parking permit application - front

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Complete requested information in each applicable blank. For make of car: Use Ford, Chevrolet, Plymouth, Toyota, Volkswagen, etc., Not model name. Return original copy of the ...

  5. Resume Based Application

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    borders, provide photos or list a Social Security Number or ... telephone numbers * Email address * Vacancy ... pages for other required documents in the application is not ...

  6. Application Power Signature Analysis

    SciTech Connect (OSTI)

    Hsu, Chung-Hsing; Combs, Jacob; Nazor, Jolie; Santiago, Fabian; Thysell, Rachelle; Rivoire, Suzanne; Poole, Stephen W

    2014-01-01

    The high-performance computing (HPC) community has been greatly concerned about energy efficiency. To address this concern, it is essential to understand and characterize the electrical loads of HPC applications. In this work, we study whether HPC applications can be distinguished by their power-consumption patterns using quantitative measures in an automatic manner. Using a collection of 88 power traces from 4 different systems, we find that basic statistical measures do a surprisingly good job of summarizing applications' distinctive power behavior. Moreover, this study opens up a new area of research in power-aware HPC that has a multitude of potential applications.

  7. Science of Signatures Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    of Recommendation from a Reference Applicant Information: Name (Last, First, MI) Citizenship* Best Contact Phone Number Email Address University enrolled in Advisor Name...

  8. Los Alamos Dynamics Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    (PII) such as address, SSN, etc. Applicant Information: Name (Last, First, MI) Citizenship* Best Contact Phone Number Email Address University enrolled in Emergency Contact...

  9. Materials Science Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Science Applications VASP VASP is a plane wave ab initio code for quantum mechanical molecular dynamics. It is highly scalable and shows very good parallel performance for a...

  10. Microsoft Word - SIP Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Page 1 of 1 Los Alamos National Security, LLC SURVIVOR INCOME PROGRAM (SIP) BENEFIT APPLICATION EMPLOYEE INFORMATION Name of Deceased: Male Female SSN: Z: DOB: DOD: Age: Married? ...

  11. Wind energy applications guide

    SciTech Connect (OSTI)

    anon.

    2001-01-01

    The brochure is an introduction to various wind power applications for locations with underdeveloped transmission systems, from remote water pumping to village electrification. It includes an introductory section on wind energy, including wind power basics and system components and then provides examples of applications, including water pumping, stand-alone systems for home and business, systems for community centers, schools, and health clinics, and examples in the industrial area. There is also a page of contacts, plus two specific example applications for a wind-diesel system for a remote station in Antarctica and one on wind-diesel village electrification in Russia.

  12. Application Process Issues

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Apply » Application Process Issues Application Process Issues Having problems using our application tools? Read information and tips to assist you. Contact applyhelp@lanl.gov (505) 665-4444, opt. 1 Monday-Friday 8 am-5 pm Email or password I forgot my account password, how can I get it reset? Email applyhelp@lanl.gov to get a password reset. Be sure to include the email address you are using and your name. Where is my email validation code? Your email validation code is located in the

  13. RADIATION APPLICATIONS INCORPORATED

    Office of Legacy Management (LM)

    . <' ," . . * . RADIATION APPLICATIONS INCORPORATED . 370 Lexl.ngton Avenue New York 17 New York jq.5' L- Contract No. A T (30-l)-2093 with the United States Atom ic Energy ...

  14. Portable Application Code Toolkit

    Energy Science and Technology Software Center (OSTI)

    2009-01-01

    PACT is a set of tools to help software developers create applications that will run on any platform and data that can be written/read on any platform.

  15. NESAP Application Process

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    partner with approximately 20 application teams to help prepare codes for the Cori architecture. A key feature of the Cori system is the Intel Knights Landing processor which will...

  16. Applications of decelerated ions

    SciTech Connect (OSTI)

    Johnson, B.M.

    1985-03-01

    Many facilities whose sole purpose had been to accelerate ion beams are now becoming decelerators as well. The development and current status of accel-decel operations is reviewed here. Applications of decelerated ions in atomic physics experiments are discussed.

  17. Niche Application Opportunities

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Niche Application Opportunities Bart A. van Hassel United Technologies Research Center (UTRC), East Hartford, Connecticut, USA DOE Materials-Based Hydrogen Storage Summit Defining pathways for onboard automotive applications Golden, CO, USA January 27-28, 2015 This presentation does not contain any proprietary, confidential, or otherwise restricted information 1 10 100 1000 10000 0 100 200 300 400 500 600 700 800 900 1000 Useful Specific Power [W/kg] Useful Specific Energy [Wh/kg] Automotive 80

  18. Application Case Studies

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Studies Application Case Studies NERSC staff along with engineers have worked with NESAP applications to prepare for the Cori-Phase 2 system based on the Xeon Phi "Knights Landing" processor. We document the several optimization case studies below. Our presentations at ISC 16 IXPUG Workshop can all be found: https://www.ixpug.org/events/ixpug-isc-2016 Other pages of interest for those wishing to learn optimization strategies of Cori Phase 2 (Knights Landing): Getting Started Measuring

  19. Application Porting and Performance

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Profiling Your Application Improving OpenMP Scaling Measuring and Understanding Memory Bandwidth Vectorization Using on-package memory Using High Performance Libraries and Tools Dungeon Session Worksheet KNL White Boxes NESAP NERSC-8 Procurement Programming models File Storage and I/O Edison PDSF Genepool Queues and Scheduling Retired Systems Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys

  20. Photovoltaic systems and applications

    SciTech Connect (OSTI)

    Not Available

    1982-01-01

    Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

  1. CX Application - Rifle, CO

    National Nuclear Security Administration (NNSA)

    Compliance Officer Rationale Office of Secure Transportation OST15-001 Application of DOE NEPA Procedure: Categorical Exclusions B1.3, Applicable to Facility Operations (10 CFR Part 1021, Subpart D, Appendix B). Rationale: The proposed action in the attached checklist (OER14-001) describes replacement of a water supply line at the facility at Fort Chaffee, Arkansas. The project involves replacement of a leaking water supply line, with no increase in capacity or water use. Proposed

  2. Microsoft Word - SIP Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Survivor Income Program (SIP) Benefit Application Revised 5/14 Page 1 of 1 Los Alamos National Security, LLC SURVIVOR INCOME PROGRAM (SIP) BENEFIT APPLICATION EMPLOYEE INFORMATION Name of Deceased: Male Female SSN: Z#: DOB: DOD: Age: Married? Date of Marriage: # Children under 18? # Children 18-22? Dependent parent? Include copy of Death Certificate ELIGIBLE SURVIVOR INFORMATION Spouse: DOB: Address: Age: Phone: E-mail: SSN: Disabled? Include copy of recorded Marriage Certificate Child: DOB:

  3. Cori Application Readiness Strategy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Code Coverage Breakdown of Application Hours on Hopper and Edison 2013 Resources for Code Teams * Early access to hardware - Access to Babbage (KNC cluster) and early "white box" test systems expected in 2015 - Early access and significant time on the full Cori system * Technical deep dives - Access to Cray and Intel staff on-site staff for application optimization and performance analysis - Multi-day deep dive ('dungeon' session) with Intel staff at Oregon Campus to examine specific

  4. Mentor-Protege Application

    Energy.gov [DOE]

    Before you submit the application please review these requirements: Must be a small business; Must be in business a minimum of two (2) years; Must already have a Department of Energy (DOE) Mentor and DOE contract number to be used on agreement before submitting for review/approval; Application must be completed in its entirety; Must meet all other DOE Mentor-Protégé Program requirements found at www.smallbusiness.energy.gov .

  5. Applications of cavity optomechanics

    SciTech Connect (OSTI)

    Metcalfe, Michael

    2014-09-15

    Cavity-optomechanics aims to study the quantum properties of mechanical systems. A common strategy implemented in order to achieve this goal couples a high finesse photonic cavity to a high quality factor mechanical resonator. Then, using feedback forces such as radiation pressure, one can cool the mechanical mode of interest into the quantum ground state and create non-classical states of mechanical motion. On the path towards achieving these goals, many near-term applications of this field have emerged. After briefly introducing optomechanical systems and describing the current state-of-the-art experimental results, this article summarizes some of the more exciting practical applications such as ultra-sensitive, high bandwidth accelerometers and force sensors, low phase noise x-band integrated microwave oscillators and optical signal processing such as optical delay-lines, wavelength converters, and tunable optical filters. In this rapidly evolving field, new applications are emerging at a fast pace, but this article concentrates on the aforementioned lab-based applications as these are the most promising avenues for near-term real-world applications. New basic science applications are also becoming apparent such as the generation of squeezed light, testing gravitational theories and for providing a link between disparate quantum systems.

  6. Materials Science Application Training 2015

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    5 Materials Science Application Training 2015 NERSC will present an one-hour online training class focused on Materials Science applications, VASP and Quantum Espresso on June 5, ...

  7. Materials Science Application Training 2016

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    6 Materials Science Application Training 2016 June 3, 2016 NERSC will present an one-hour online training class focused on Materials Science applications, VASP and Quantum Espresso ...

  8. Multiphysics Application Coupling Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-12-02

    This particular consortium implementation of the software integration infrastructure will, in large part, refactor portions of the Rocstar multiphysics infrastructure. Development of this infrastructure originated at the University of Illinois DOE ASCI Center for Simulation of Advanced Rockets (CSAR) to support the center's massively parallel multiphysics simulation application, Rocstar, and has continued at IllinoisRocstar, a small company formed near the end of the University-based program. IllinoisRocstar is now licensing these new developments as free, openmore » source, in hopes to help improve their own and others' access to infrastructure which can be readily utilized in developing coupled or composite software systems; with particular attention to more rapid production and utilization of multiphysics applications in the HPC environment. There are two major pieces to the consortium implementation, the Application Component Toolkit (ACT), and the Multiphysics Application Coupling Toolkit (MPACT). The current development focus is the ACT, which is (will be) the substrate for MPACT. The ACT itself is built up from the components described in the technical approach. In particular, the ACT has the following major components: 1.The Component Object Manager (COM): The COM package provides encapsulation of user applications, and their data. COM also provides the inter-component function call mechanism. 2.The System Integration Manager (SIM): The SIM package provides constructs and mechanisms for orchestrating composite systems of multiply integrated pieces.« less

  9. Application Schedule - Combustion Energy Frontier Research Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Schedule Application Schedule Applications for the Combustion Energy Research Fellows program are considered on a rolling basis. Applicant selection occurs three times...

  10. Networking and Application Strategies

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Networking and Application Strategies Networking and Application Strategies Los Alamos Lab recruits the best minds on the planet and offers job search information and assistance to our dual career spouses or partners. Contact Us dualcareers@lanl.gov You know more people than you think you do Having strong existing connections and building new ones is essential to finding a job-especially for a dual career family that is new to the Los Alamos area. Networking is a proven and effective way to

  11. Applicant Organization: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    65 KB) More Documents & Publications Abengoa Bioenergy Biomass of Kansas, LLC Applicant Organization: Broin Companies

  12. Applicant Organization: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    33 KB) More Documents & Publications BlueFire Ethanol, Inc. BlueFire Ethanol Applicant Organization:

  13. Permit application modifications

    SciTech Connect (OSTI)

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  14. Core Design Applications

    Energy Science and Technology Software Center (OSTI)

    1995-07-12

    CORD-2 is intended for core desigh applications of pressurized water reactors. The main objective was to assemble a core design system which could be used for simple calculations (such as frequently required for fuel management) as well as for accurate calculations (for example, core design after refueling).

  15. Adaptive Sampling Proxy Application

    Energy Science and Technology Software Center (OSTI)

    2012-10-22

    ASPA is an implementation of an adaptive sampling algorithm [1-3], which is used to reduce the computational expense of computer simulations that couple disparate physical scales. The purpose of ASPA is to encapsulate the algorithms required for adaptive sampling independently from any specific application, so that alternative algorithms and programming models for exascale computers can be investigated more easily.

  16. TIGER Arc Modification Application

    Energy Science and Technology Software Center (OSTI)

    1995-03-06

    The application enables the geometric correction of TIGER arcs to a more accurate spatial data set. This is done in a structured automated environment according to Census Bureau guidelines and New Mexico state GIS standards. Arcs may be deleted, added, combined, split, and moved relative to a coverage or image displayed in the background.

  17. EERE Postdoctoral Research Awards Application Checklist

    Energy.gov [DOE]

    EERE Postdoctoral Research Awards Application Checklist. Use this checklist to keep track of required application components.

  18. Chain Reaction Innovations: Innovation Applicant Information...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Innovation Applicant Information Information for Innovation Applicants in the Chain Reaction Innovations program PDF icon CRIinnovationapplicantinfo

  19. BLM - Solar and Wind Energy Applications - Pre-Application and...

    Open Energy Information (Open El) [EERE & EIA]

    Solar and Wind Energy Applications - Pre-Application and Screening Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: BLM - Solar and...

  20. RAIS PDA Application

    Energy Science and Technology Software Center (OSTI)

    2004-10-06

    The Regulatory Authority Information System (RAIS) is a management tool for information related to the regulatory control of radioactive sealed sources developed for the International Atomic Energy Agency (IAEA). The RAIS PDA Application extends the functionality of the RAIS database by allowinig users to download radioactive sealed source data from the RAIS database to a portable PDA equipped with a barcode scanner. This allows users to verify radioactive sealed source data, gather radioactive sealed sourcemore » audit information, and upload audit data to the RAIS database in the field. The application was developed for a tested on the Symbol Model SPT 1800 PDA with PalmOS version 4.1 and a built-in barcode scanner.« less

  1. parking permit application - front

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    POSITION TITLE MI FIRST NAME LAST NAME HOME ADDRESS (Street, City, State) EMPLOYER DOE ROUTE SYMBOL WORK PHONE EXT SIGNATURE ST CAR NO 1, MAKE TAG NUMBER ST TAG NUMBER CAR NO 2, MAKE YEARS FEDERAL SERVICE POSITION TITLE MI FIRST NAME LAST NAME HOME ADDRESS (Street, City, State) EMPLOYER DOE ROUTE SYMBOL WORK PHONE EXT INSTRUCTIONS: Complete requested information in each applicable blank. For make of car: Use Ford, Chevrolet, Plymouth, Toyota, Volkswagen, etc., Not model name. Return original

  2. Performance Application Programming Interface

    Energy Science and Technology Software Center (OSTI)

    2005-10-31

    PAPI is a programming interface designed to provide the tool designer and application engineer with a consistent interface and methodology for use of the performance counter hardware found in most major microprocessors. PAPI enables software engineers to see, in near real time, the relation between software performance and processor events. This release covers the hardware dependent implementation of PAPI version 3 for the IBM BlueGene/L (BG/L) system.

  3. Metagenomic Applications in Environmental

    Office of Scientific and Technical Information (OSTI)

    Metagenomic Applications in Environmental Monitoring and Bioremediation Stephen M. Techtmann1* and Terry C. Hazen2 1 Department of Biological Sciences, Michigan Tech University 2 Department of Civil and Environmental Engineering, University of Tennessee Keywords: Bioremediation, metagenomics, microbial community structure, environmental systems biology Corresponding author: Stephen M. Techtmann Email: smtechtm@mtu.edu, Telephone: 906-487-3250 Fax: 906-487-3167 1 Abstract With the rapid advances

  4. IMS applications analysis

    SciTech Connect (OSTI)

    RODACY,PHILIP J.; REBER,STEPHEN D.; SIMONSON,ROBERT J.; HANCE,BRADLEY G.

    2000-03-01

    This report examines the market potential of a miniature, hand-held Ion Mobility Spectrometer. Military and civilian markets are discussed, as well as applications in a variety of diverse fields. The strengths and weaknesses of competing technologies are discussed. An extensive Ion Mobility Spectrometry (IMS) bibliography is included. The conclusions drawn from this study are: (1) There are a number of competing technologies that are capable of detecting explosives, drugs, biological, or chemical agents. The IMS system currently represents the best available compromise regarding sensitivity, specificity, and portability. (2) The military market is not as large as the commercial market, but the military services are more likely to invest R and D funds in the system. (3) Military applications should be addressed before commercial applications are addressed. (4) There is potentially a large commercial market for rugged, hand-held Ion Mobility Spectrometer systems. Commercial users typically do not invest R and D funds in this type of equipment rather, they wait for off-the-shelf availability.

  5. Load Balancing Scientific Applications

    SciTech Connect (OSTI)

    Pearce, Olga Tkachyshyn

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  6. Transactional Network Platform: Applications

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  7. Fuel cell market applications

    SciTech Connect (OSTI)

    Williams, M.C.

    1995-12-31

    This is a review of the US (and international) fuel cell development for the stationary power generation market. Besides DOE, GRI, and EPRI sponsorship, the US fuel cell program has over 40% cost-sharing from the private sector. Support is provided by user groups with over 75 utility and other end-user members. Objectives are to develop and demonstrate cost-effective fuel cell power generation which can initially be commercialized into various market applications using natural gas fuel by the year 2000. Types of fuel cells being developed include PAFC (phosphoric acid), MCFC (molten carbonate), and SOFC (solid oxide); status of each is reported. Potential international applications are reviewed also. Fuel cells are viewed as a force in dispersed power generation, distributed power, cogeneration, and deregulated industry. Specific fuel cell attributes are discussed: Fuel cells promise to be one of the most reliable power sources; they are now being used in critical uninterruptible power systems. They need hydrogen which can be generated internally from natural gas, coal gas, methanol landfill gas, or other fuels containing hydrocarbons. Finally, fuel cell development and market applications in Japan are reviewed briefly.

  8. Application Program Interface for Engineering and Scientific Applications

    Energy Science and Technology Software Center (OSTI)

    2001-10-18

    An Application Program Interface (API) for engineering and scientific applications. This system allows application developers to write to a single uniform interface, obtaining access to all solvers in the Trilinos framwork. This includes linear solvers, eigensolvers, non-linear solvers, and time-dependent solvers.

  9. ANL Beams and Applications Seminar

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 Seminar Sponsers AAI ASD ATLAS HEP PHY ANL Beams and Applications Seminar The ANL Beam and Applications Seminar is...

  10. Web Application Development Archives - Nercenergy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Tips for Understanding the Relationship Between a Web Application and SLAs At the heart of ... Web Application Monitoring - How it Can Help Just because your web app is online, doesn't ...

  11. Web Application Monitoring Archives - Nercenergy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Tips for Understanding the Relationship Between a Web Application and SLAs At the heart of ... Web Application Monitoring - How it Can Help Just because your web app is online, doesn't ...

  12. Deep Energy Retrofits & State Applications

    Energy.gov [DOE]

    This presentation, given through the DOE's Technical Assitance Program (TAP), provides information on Deep Energy Retrofits & State Applications

  13. Biodiesel Revs Up Its Applications

    Energy.gov [DOE]

    A look at the rapidly expanding applications of biodiesel from the 2011 Natonal Biodiesel Board's Conference and Expo.

  14. Application Performance Variability on Hopper

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Performance Variability on Hopper Application Performance Variability on Hopper Introduction The Hopper system is a Cray XE6 system with roughly 6300 compute nodes. In normal day to day operations, Hopper can be running hundreds of individual applications at any given time. Some users have reported application runtime variability, in some cases as large as 30-40%. Non-uniform runtimes makes it more difficult for scientists to measure the performance of their codes and to estimate the

  15. Pending Applications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Regulation » Pending Applications Pending Applications Pending Export Authorization Applications: To Mexico: EA-184-C Morgan Stanley Capital Group Inc. (FR Notice) Applied 09/14/2016 Morgan Stanley Capital Group Inc. (Application) Morgan Stanley Capital Group Inc. (Public Comment from Jean Public 09-27-16) Morgan Stanley Capital Group Inc. (Motion to Intervene and Protest from Public Citizen 10-21-16) Morgan Stanley Capital Group Inc. (Motion for Leave to Answer, and Answer to Protest from MSCG

  16. Ridefinders Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ridefinders Application Ridefinders Application Form used to participate in the Ridefinders initiative. Form is submitted to the Transportation Coordinator. Ridefinders Application (5.61 KB) More Documents & Publications DOE HQ F 3780.2 The Intersection of Net Metering and Retail Choice: An Overview of Policy, Practice and Issues EA-1440-S1: Final Supplement to the Site-Wide Environmental Assessment

  17. Factsheets Web Application

    SciTech Connect (OSTI)

    VIGIL,FRANK; REEDER,ROXANA G.

    2000-10-30

    The Factsheets web application was conceived out of the requirement to create, update, publish, and maintain a web site with dynamic research and development (R and D) content. Before creating the site, a requirements discovery process was done in order to accurately capture the purpose and functionality of the site. One of the high priority requirements for the site would be that no specialized training in web page authoring would be necessary. All functions of uploading, creation, and editing of factsheets needed to be accomplished by entering data directly into web form screens generated by the application. Another important requirement of the site was to allow for access to the factsheet web pages and data via the internal Sandia Restricted Network and Sandia Open Network based on the status of the input data. Important to the owners of the web site would be to allow the published factsheets to be accessible to all personnel within the department whether or not the sheets had completed the formal Review and Approval (R and A) process. Once the factsheets had gone through the formal review and approval process, they could then be published both internally and externally based on their individual publication status. An extended requirement and feature of the site would be to provide a keyword search capability to search through the factsheets. Also, since the site currently resides on both the internal and external networks, it would need to be registered with the Sandia search engines in order to allow access to the content of the site by the search engines. To date, all of the above requirements and features have been created and implemented in the Factsheet web application. These have been accomplished by the use of flat text databases, which are discussed in greater detail later in this paper.

  18. Passive solar applications

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1985-01-01

    Passive solar applications in buildings are described. The major emphasis of the research has been on devising mathematical models to characterize heat flow within buildings, on the validation of these models by comparison with test results, and on the subsequent use of the models to investigate the influence of both various design parameters and the weather on system performance. Results from both test modules and monitored buildings are discussed. Simulation analysis, the development of simplified methods, and systems analysis are outlined. Passive solar potential in China is discussed.

  19. ATVM APPLICATION PORTAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PORTAL ATVM APPLICATION PORTAL ATVM APPLICATION PORTAL The ATVM online application portal guides users through the Advanced Technology Vehicles Manufacturing (ATVM) direct loan application process. The system is designed to guide users through the submission of a ATVM direct loan application. HOWEVER, before beginning an application, potential applicants are strongly encouraged to first: Review ATVM project eligibility requirements. Understand all applicable fees for the ATVM application

  20. Direct application of geothermal energy

    SciTech Connect (OSTI)

    Reistad, G.M.

    1980-01-01

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

  1. Energy efficient motor application

    SciTech Connect (OSTI)

    Koenig, S.R.

    1999-01-20

    Motor driven processes represent a large portion of the energy consumption in the United States and, as a result, present a large opportunity for energy savings. Energy efficient motors reduce energy use and will see wider implementation as the impact of the Energy Policy Act of 1992 is felt. These motors are made possible by design and material improvements without compromising reliability, quality, or performance. One drawback is their potential for nuisance tripping due to a high inrush current at starting. Solutions do exist to this problem. Economics also play a large role in energy efficient motor application. The cost of repairing a motor or installing a new machine as well as any utility rebates determine if the efficient motor price premium is offset by energy savings. Other issues such as adjustable speed drives, belts and supply voltage affect efficiency as well. Several industry examples demonstrate the potential results. A thorough understanding of these factors show the energy efficient motor can be a good choice for most applications.

  2. SNAP:SN (Discrete Ordinates) Application Proxy

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Proxy SNAP serves as a proxy application to model the performance of a modern discrete ordinates neutral particle transport application. June 29, 2013 software SNAP...

  3. TGLO - Application to Prospect | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    to Prospect Abstract This is an application to prospect with the Texas General Land Office. Form Type ApplicationNotice Form Topic Application to Prospect Organization Texas...

  4. Property:NEPA Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Application Jump to: navigation, search Property Name NEPA Application Property Type Page Description NEPA application files. All NOIs. Drilling permits are also appropriate. This...

  5. ATVM APPLICATION PROCESS | Department of Energy

    Energy.gov (indexed) [DOE]

    In order to apply for an ATVM direct loan, applicants must submit a substantially complete application meeting all applicable eligibility requirements. No payment of fees to the ...

  6. PENSION ACTUARIAL APPLICATION, Bechtel Jacobs Company, LLC |...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    PENSION ACTUARIAL APPLICATION, Bechtel Jacobs Company, LLC PENSION ACTUARIAL APPLICATION, Bechtel Jacobs Company, LLC PENSION ACTUARIAL APPLICATION, Bechtel Jacobs Company, LLC PDF ...

  7. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: energy efficiency Type Term...

  8. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: DOE Type Term Title Author...

  9. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: PV Type Term Title Author...

  10. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: utility scale Type Term...

  11. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: green apps Type Term Title...

  12. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: Renewable Energy Type Term...

  13. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Green Button Applications > Posts by term > Green Button Applications Content Group Activity By term Q & A Feeds Term: Desert Sunlight Type Term...

  14. NDMV - Longer Combination Vehicle (LCV) Permit Application |...

    Open Energy Information (Open El) [EERE & EIA]

    Vehicle (LCV) Permit Application Abstract This form is the Nevada Department of Motor Vehicles LCV Application. Form Type ApplicationNotice Form Topic Longer Combination...

  15. PPPO News Archive | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    at the Department of Energy's National Science Bowl in Washington, D.C. May 1, 2012 This cylinder hauler at Paducah's Babcock & Wilcox Conversion Services plant delivers the first...

  16. Clean Cities Moving Fleets Forward with Liquefied Natural Gas...

    Energy.gov (indexed) [DOE]

    Waste hauler Enviro Express converted its fleet of heavy-duty trucks to run on liquefied natural gas (LNG) and built the first LNG station east of the Mississippi River with help...

  17. Clean Energy Application Center

    SciTech Connect (OSTI)

    Freihaut, Jim

    2013-09-30

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

  18. Electrodes for microfluidic applications

    DOE Patents [OSTI]

    Crocker, Robert W.; Harnett, Cindy K.; Rognlien, Judith L.

    2006-08-22

    An electrode device for high pressure applications. These electrodes, designed to withstand pressure of greater than 10,000 psi, are adapted for use in microfluidic devices that employ electrokinetic or electrophoretic flow. The electrode is composed, generally, of an outer electrically insulating tubular body having a porous ceramic frit material disposed in one end of the outer body. The pores of the porous ceramic material are filled with an ion conductive polymer resin. A conductive material situated on the upper surface of the porous ceramic frit material and, thus isolated from direct contact with the electrolyte, forms a gas diffusion electrode. A metal current collector, in contact with the gas diffusion electrode, provides connection to a voltage source.

  19. Clean Cities Moving Fleets Forward with Liquefied Natural Gas | Department

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    of Energy Moving Fleets Forward with Liquefied Natural Gas Clean Cities Moving Fleets Forward with Liquefied Natural Gas May 30, 2013 - 2:52pm Addthis Waste hauler Enviro Express converted its fleet of heavy-duty trucks to run on liquefied natural gas (LNG) and built the first LNG station east of the Mississippi River with help from the Energy Department's Clean Cities initiative. | Photo courtesy of New Haven Clean Cities Coalition. Waste hauler Enviro Express converted its fleet of

  20. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, S.R.

    1997-05-13

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers is disclosed. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated. 13 figs.

  1. Dynamic load balancing of applications

    DOE Patents [OSTI]

    Wheat, Stephen R.

    1997-01-01

    An application-level method for dynamically maintaining global load balance on a parallel computer, particularly on massively parallel MIMD computers. Global load balancing is achieved by overlapping neighborhoods of processors, where each neighborhood performs local load balancing. The method supports a large class of finite element and finite difference based applications and provides an automatic element management system to which applications are easily integrated.

  2. 2004 WIPP Compliance Recertification Application

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2004 WIPP Compliance Recertification Application DOE/WIPP 04-3231 March 2004 Content of the CRA As required by Title 40 CFR, Parts 191 and 194, the 2004 Compliance Recertification Application addresses a wide range of topics. It incorporates portions of the first Compliance Certification Application (CCA) and provides updates in those areas where approved changes occurred. It also presents new data and associated analyses. In addition, the appliacation responds to specific requests from EPA for

  3. Chemistry and Material Sciences Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Chemistry and Material Sciences Applications Chemistry and Material Sciences Applications June 26, 2012 Jack Zhengji NERSC Training Event 09:00 - 12:00 PST June 26, 2012 Concurrently presented on the web and at NERSC's Oakland Scientific Facility Attendance: 45 Chemistry and Material Sciences Applications Zhengji Zhao, NERSC User Services Group Jack Deslippe, NERSC User Services Group The first hour of the training is targeted at beginners. We will show you how to get started running material

  4. Grid Applications for Energy Storage

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Applications for Energy Storage Flow Cells for Energy Storage Workshop Washington DC 7-8 March 2012 Joe Eto jheto@lbl.gov (510) 486-7284 Referencing a Recent Sandia Study,* This Talk Will: Describe and illustrate selected grid applications for energy storage Time-of-use energy cost management Demand charge management Load following Area Regulation Renewables energy time shift Renewables capacity firming Compare Sandia's estimates of the economic value of these applications to the Electricity

  5. Presentation: High Performance Computing Applications

    Energy.gov [DOE]

    A briefing to the Secretary's Energy Advisory Board on High Performance Computing Applications delivered by Frederick H. Streitz, Lawrence Livermore National Laboratory.

  6. Processor Emulator with Benchmark Applications

    Energy Science and Technology Software Center (OSTI)

    2015-11-13

    A processor emulator and a suite of benchmark applications have been developed to assist in characterizing the performance of data-centric workloads on current and future computer architectures. Some of the applications have been collected from other open source projects. For more details on the emulator and an example of its usage, see reference [1].

  7. Membership Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Membership Application Membership Application Mission The Mission of the Northern New Mexico Citizens' Advisory Board is to provide meaningful opportunities for collaborative dialogue among the diverse multicultural communities of Northern New Mexico, the Department of Energy (DOE), the Los Alamos National Laboratory (LANL), and state and federal regulatory agencies. The Board's responsibilities include providing advice and recommendations on DOE Environmental Management (EM) programs regarding

  8. Evaluating Application Resilience with XRay

    SciTech Connect (OSTI)

    Chen, Sui; Bronevetsky, Greg; Li, Bin; Casas-Guix, Marc; Peng, Lu

    2015-05-07

    The rising count and shrinking feature size of transistors within modern computers is making them increasingly vulnerable to various types of soft faults. This problem is especially acute in high-performance computing (HPC) systems used for scientific computing, because these systems include many thousands of compute cores and nodes, all of which may be utilized in a single large-scale run. The increasing vulnerability of HPC applications to errors induced by soft faults is motivating extensive work on techniques to make these applications more resiilent to such faults, ranging from generic techniques such as replication or checkpoint/restart to algorithmspecific error detection and tolerance techniques. Effective use of such techniques requires a detailed understanding of how a given application is affected by soft faults to ensure that (i) efforts to improve application resilience are spent in the code regions most vulnerable to faults and (ii) the appropriate resilience technique is applied to each code region. This paper presents XRay, a tool to view the application vulnerability to soft errors, and illustrates how XRay can be used in the context of a representative application. In addition to providing actionable insights into application behavior XRay automatically selects the number of fault injection experiments required to provide an informative view of application behavior, ensuring that the information is statistically well-grounded without performing unnecessary experiments.

  9. Corrugated pipe adhesive applicator apparatus

    DOE Patents [OSTI]

    Shirey, R.A.

    1983-06-14

    Apparatus for coating selected portions of the troughs of a corrugated pipe with an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough. 4 figs.

  10. Corrugated pipe adhesive applicator apparatus

    DOE Patents [OSTI]

    Shirey, Ray A. (North Grafton, MA)

    1983-06-14

    Apparatus for coating selected portions of the troughs of a corrugated pipe within an adhesive includes a support disposed within the pipe with a reservoir containing the adhesive disposed on the support. A pump, including a spout, is utilized for supplying the adhesive from the reservoir to a trough of the pipe. A rotatable applicator is supported on the support and contacts the trough of the pipe. The applicator itself is sized so as to fit within the trough, and contacts the adhesive in the trough and spreads the adhesive in the trough upon rotation. A trough shield, supported by the support and disposed in the path of rotation of the applicator, is utilized to prevent the applicator from contacting selected portions of the trough. A locator head is also disposed on the support and provides a way for aligning the spout, the applicator, and the trough shield with the trough.

  11. Ultrasonics: Fundamentals, Technologies, and Applications

    SciTech Connect (OSTI)

    Ensminger, Dale; Bond, Leonard J.

    2011-09-17

    This is a new edition of a bestselling industry reference. Discusses the science, technology, and applications of low and high power ultrasonics, including industrial implementations and medical uses. Reviews the basic equations of acoustics, starting from basic wave equations and their applications. New material on property determination, inspection of metals (NDT) and non-metals, imaging, process monitoring and control. Expanded discussion of transducers, transducer wave-fields, scattering, attenuation and measurement systems and models. New material that discusses high power ultrasonics - in particular using mechanical effects and sonochemistry, including applications to nano-materials. Examines diagnosis, therapy, and surgery from a technology and medical physics perspective.

  12. Visualizing Twenty Years of Applications

    SciTech Connect (OSTI)

    Potel, Mike; Wong, Pak C.

    2014-11-01

    This issue of IEEE Computer Graphics and Applications marks the 20th anniversary of the Applications department as a regular feature of the magazine. We thought it might be interesting to look back at the 20 years of Applications department articles to assess its evolution over that time. By aggregating all twenty years of articles and applying a little statistical and visual analytics, we’ve uncovered some interesting characteristics and trends we thought we’d share to mark this 20 year milestone.

  13. Applications of Nuclear Resonance Fluorescence

    SciTech Connect (OSTI)

    Warren, Glen A.; Detwiler, Rebecca S.; Peplowski, Patrick N.

    2010-11-11

    Nuclear Resonance Fluorescence (NRF) has the potential of addressing a wide variety of applications, which require isotopic and/or elemental information about a sample. We have investigated a variety of non-proliferation applications that may be addressed by NRF. From these applications, we have selected two, measuring uranium enrichment in UF6 cylinders and material verification in dismantlement, to investigate in more detail. Analytical models have been developed to evaluate these applications, and test measurements have been conducted to validate those models. We found that it is unlikely with current technology to address the requirements for UF6 cylinder enrichment measurements. In contrast, NRF is a very promising approach for material verification for dismantlement.

  14. Method for recovery of hydrocarbons form contaminated soil or refuse materials

    DOE Patents [OSTI]

    Ignasiak, Teresa; Turak, Ali A.; Pawlak, Wanda; Ignasiak, Boleslaw L.; Guerra, Carlos R.; Zwillenberg, Melvin L.

    1991-01-01

    A method is provided for separating an inert solid substantially inorganic fraction comprising sand or soil from a tarry or oily organic matter in a feedstock. The feedstock may be contaminated soil or tarry waste. The feedstock is combined with pulverized coal and water. The ratio (oil or tar to dry weight of coal) of about 1.0:10 to about 4.0:10 at a temperature in the range of 60.degree.-95.degree. C. The mixture is agitated, the coarse particles are removed, and up to about 0.10% by weight (based on weight of coal) of a frothing agent is added. The mixture is then subjected to flotation, and the froth is removed from the mixture.

  15. Production of liquid fuels out of plant biomass and refuse: Methods, cost, potential

    SciTech Connect (OSTI)

    Woick, B.; Friedrich, R.

    1981-09-01

    Different ways of producing biomass and its conversion into high grade fuel for vehicles are reviewed with particular reference to physical and geographical factors, pertaining in the Federal Republic of Germany (FRG). Even with the potentially small amount of biomass in the FRG, the fueling of diesel engines with rape oil or modified ethanol, which can be obtained from any cellulosic feedstock, seems to pose the fewest difficulties and promises greatest efficiency. However, the amount of fuel produced from biomass can probably only meet a very small percentage of the total amount required.

  16. Reliable Alloy that Refuses to Forget, Repeatedly | U.S. DOE...

    Office of Science (SC) [DOE]

    its shape, despite being transformed over 10 million times, could upgrade solar devices. ... as artificial heart valves, refrigeration components, and solar energy conversion devices. ...

  17. Vortex Characterization for Engineering Applications

    SciTech Connect (OSTI)

    Jankun-Kelly, M; Thompson, D S; Jiang, M; Shannahan, B; Machiraju, R

    2008-01-30

    Realistic engineering simulation data often have features that are not optimally resolved due to practical limitations on mesh resolution. To be useful to application engineers, vortex characterization techniques must be sufficiently robust to handle realistic data with complex vortex topologies. In this paper, we present enhancements to the vortex topology identification component of an existing vortex characterization algorithm. The modified techniques are demonstrated by application to three realistic data sets that illustrate the strengths and weaknesses of our approach.

  18. Application of SCR and PM-METALIT for Non-Road Applications:...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    SCR and PM-METALIT for Non-Road Applications: SCRi Application of SCR and PM-METALIT for Non-Road Applications: SCRi Advantages of this new application of SCR and PM-METALIT for ...

  19. Biomedical Applications of Microfluidic Technology (Technical...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Technical Report: Biomedical Applications of Microfluidic Technology Citation Details In-Document Search Title: Biomedical Applications of ...

  20. Application - Combustion Energy Frontier Research Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    2015 FAQ Lecture Videos News, Events & Publications Contact CEFRC CEFRC In Pictures CEFRC Intranet (Members Only) Home 2015 Combustion Summer School Application Application...

  1. MPA, Materials Physics and Applications (Technical Report) |...

    Office of Scientific and Technical Information (OSTI)

    MPA, Materials Physics and Applications Citation Details In-Document Search Title: MPA, Materials Physics and Applications Authors: Kippen, Karen Elizabeth 1 + Show Author...

  2. Software Engineer (Scientific Application) | Princeton Plasma...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Software Engineer (Scientific Application) Department: Information Technology Staff: ENG ... This Scientific Applications Software Engineer position is with the Controls and Data ...

  3. NDOT - Application Information for Evaluating Annual Permit ...

    Open Energy Information (Open El) [EERE & EIA]

    - Application Information for Evaluating Annual Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: NDOT - Application Information for Evaluating Annual...

  4. Grant Application Process | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Grant Application Process | National Nuclear Security Administration Facebook Twitter ... Apply for Our Jobs Our Jobs Working at NNSA Blog Home Grant Application Process Grant ...

  5. 2015 Housing Innovation Awards Application Form | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Housing Innovation Awards Application Form 2015 Housing Innovation Awards Application Form ... The 2015 ceremony will take place at the EEBA Excellence in Building Conference & Expo ...

  6. AXISYMMETRIC MAGNETIC MIRROR APPLICATIONS - DIVERTER TEST STAND...

    Office of Scientific and Technical Information (OSTI)

    APPLICATIONS - DIVERTER TEST STAND TO FUSION POWER PLANT Citation Details In-Document Search Title: AXISYMMETRIC MAGNETIC MIRROR APPLICATIONS - DIVERTER TEST STAND TO FUSION POWER ...

  7. Oregon Modification Application Geothermal Wells Form | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Modification Application Geothermal Wells Form Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Oregon Modification Application Geothermal Wells Form Form...

  8. Microsoft Word - Applications of HVDC Technologies - Summary...

    Office of Environmental Management (EM)

    Applications of HVDC Technologies: Workshop Summary Page 1 Applications of HVDC Technologies: Workshop Summary Page 2 Introduction The advantages of high-voltage direct current ...

  9. Coastal Development Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Development Permit Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: Coastal Development Permit Application Published Publisher Not...

  10. Vermont Small Hydropower Assistance Program Application | Open...

    Open Energy Information (Open El) [EERE & EIA]

    OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Vermont Small Hydropower Assistance Program ApplicationLegal Abstract Application form for the Small...

  11. Vermont Section 401 Water Quality Certification Application ...

    Open Energy Information (Open El) [EERE & EIA]

    Abstract Application required for Section 401 water quality certification under the Clean Water Act. Form Type ApplicationNotice Form Topic Section 401 Water Quality...

  12. Groundwater Withdrawal Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Withdrawal Permit ApplicationLegal Abstract This application initiates the Drinking Water and Groundwater Protection Division's, a division of the Department of Environmental...

  13. Graduate Student Research Program Application Information | Jefferson...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Graduate Student Research Program Application Information DOE Office of Science Graduate Student Research Program Application Information; Submission Deadline is May 11 Dear ...

  14. CDPHE Industrial Individual Wastewater Discharge Permit Application...

    Open Energy Information (Open El) [EERE & EIA]

    ApplicationLegal Abstract Application provided by the Colorado Department of Public Health and Environment (CDPHE) for use by all individual industrial process water dischargers...

  15. DEPARTMENT OF ENERGY NONEXCLUSIVE PATENT LICENSE APPLICATION...

    Energy.gov (indexed) [DOE]

    licensed on DOE-owned patents applications in appropriate circumstances to applicants with satisfactory plans for development andor marketing of the invention. NONEXCLUSIVE PATENT ...

  16. Biomass Boiler for Food Processing Applications | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Biomass Boiler for Food Processing Applications Biomass Boiler for Food Processing Applications Biomass Boiler Uses a Combination of Wood Waste and Tire-Derived Fuel In 2011, the ...

  17. EPA's Brownfields Application Website | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Application Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA's Brownfields Application Website Abstract This website provides information...

  18. Portable Application Development for Next Generation Supercomputer...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    The ALCF has the Early Science Program (ESP), NERSC the NERSC Exascale Science Application Program (NESAP), and the OLCF, the Center for Accelerated Application Readiness (CAAR) ...

  19. Vehicular Thermoelectric Applications Session DEER 2009 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Thermoelectric Applications Session DEER 2009 Vehicular Thermoelectric Applications Session DEER 2009 This presentation is an overview of the DOE thermoelectric program. ...

  20. Named Fellowship Applicant Instructions | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Applicant Instructions Instructions for applying for Argonne Named Fellowships. More information is available online. PDF icon Named_Fellowship_Applicant_Instructions

  1. CDOT Applications and Forms | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    to library Legal Document- OtherOther: CDOT Applications and FormsLegal Abstract The California Department of Transportation (CDOT) provides various applications and forms,...

  2. ARM - ARM Summer Training and Science Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Applications Summer Training Information Training Home Agenda Instructor Bios Project Reports, Presentations, and Lectures Images ARM Summer Training and Science Applications ...

  3. Electric Transportation Applications All Rights Reserved ETA...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Electric Transportation Applications All Rights Reserved TABLE OF CONTENTS 1.0 Objectives ... Electric Transportation Applications All Rights Reserved 1.0 Objective The objective of ...

  4. Sea ice - atmosphere interaction: Application of multispectral...

    Office of Scientific and Technical Information (OSTI)

    Application of multispectral satellite data in polar surface energy flux estimates. ... Title: Sea ice - atmosphere interaction: Application of multispectral satellite data in ...

  5. Caltrans Encroachment Permit Application Guide | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Application GuidePermittingRegulatory GuidanceGuideHandbook Abstract This guide sets forth the application procedure for encroachment permits under Caltrans. Author Caltrans...

  6. REC Generator Certification Application - Texas | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    REC Generator Certification Application - Texas Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: REC Generator Certification Application - Texas...

  7. EERE Postdoctoral Research Awards Application Checklist

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    submitted by applicant Application (via www.zintellect.comPostingDetails853 ) Curriculum Vitae (CV) Research Proposal (including Innovation Project and Milestones) Letter of...

  8. PIA - WEB Physical Security Major Application | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Physical Security Major Application PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application ...

  9. MEMORANDUM FOR: JOHN CONTI ASSISTANT ADMINISTRATOR FOR ENERGY

    Annual Energy Outlook

    ... heavy truck market into segments (like refuse or bucket trucks) that best fit LNG and electric vehicle applications and how LNG and electric vehicles were competed in the model. ...

  10. Applications attract DuPont

    SciTech Connect (OSTI)

    Rotman, D.

    1996-08-07

    Scientists at DuPont say they have demonstrated the first chemical processing application for high-temperature superconducting (HTS) magnets. DuPont says the work, which uses a HTS magnet to separate mineral contaminants from kaolin, points to the feasibility of a range of HTS applications in industrial processing, including those involving polymerization. DuPont`s success comes after 10 years of work to commercialize high-temperature superconductors. And while superconductors have lost much of their luster since the late 1980s, the company says it is still bullish on their prospects. {open_quotes}At the moment, there`s no real market for superconductors,{close_quotes} says Alan Lauder, general manager/superconductivity. But, he says, several potentially lucrative applications could be commercialized within the next several years.

  11. Medical Applications of Synchrotron Radiation

    DOE R&D Accomplishments [OSTI]

    Thomlinson, W.

    1991-10-01

    Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved.

  12. Using Hadoop for HPC Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Using Hadoop for HPC Applications Using Hadoop for HPC Applications October 5, 2011 Lavanya-Ramikrishnan.jpg NERSC Training Event 10:00 - 14:00 PDT Oct. 5, 2011 Concurrently presented on the web and at NERSC's Oakland Scientific Facility No registration is required for NERSC users; for others registration is now closed. NERSC Users: Log in to the web site with your NERSC username and password and click on the "Web Meeting Info" link to the left to join. Using Hadoop for HPC

  13. Guidance for Potential ATVM Applicants (June 2016)

    Energy.gov [DOE]

    The Advanced Technology Vehicles Manufacturing Loan Program (ATVM Program) is administered by the U.S. Department of Energy’s (DOE) Loan Programs Office (LPO). This guidance for the ATVM Program applicants covers the following areas: General Eligibility Requirements, General Application Requirements, Pre-Application Consultation, and Application Process.

  14. ENGINEERING DEVELOPMENT OF ADVANCED PHYSICAL FINE COAL CLEANING FOR PREMIUM FUEL APPLICATIONS

    SciTech Connect (OSTI)

    none,

    1997-06-01

    Bechtel, together with Amax Research and Development Center (Amax R&D), has prepared this study which provides conceptual cost estimates for the production of premium quality coal-water slurry fuel (CWF) in a commercial plant. Two scenarios are presented, one using column flotation technology and the other the selective agglomeration to clean the coal to the required quality specifications. This study forms part of US Department of Energy program "Engineering Development of Advanced Physical Fine Coal Cleaning for Premium Fuel Applications," (Contract No. DE-AC22- 92PC92208), under Task 11, Project Final Report. The primary objective of the Department of Energy program is to develop the design base for prototype commercial advanced fine coal cleaning facilities capable of producing ultra-clean coals suitable for conversion to stable and highly loaded CWF. The fuels should contain less than 2 lb ash/MBtu (860 grams ash/GJ) of HHV and preferably less than 1 lb ash/MBtu (430 grams ash/GJ). The advanced fine coal cleaning technologies to be employed are advanced column froth flotation and selective agglomeration. It is further stipulated that operating conditions during the advanced cleaning process should recover not less than 80 percent of the carbon content (heating value) in the run-of-mine source coal. These goals for ultra-clean coal quality are to be met under the constraint that annualized coal production costs does not exceed $2.5 /MBtu ($ 2.37/GJ), including the mine mouth cost of the raw coal. A further objective of the program is to determine the distribution of a selected suite of eleven toxic trace elements between product CWF and the refuse stream of the cleaning processes. Laboratory, bench-scale and Process Development Unit (PDU) tests to evaluate advanced column flotation and selective agglomeration were completed earlier under this program with selected coal samples. A PDU with a capacity of 2 st/h was designed by Bechtel and installed at Amax R

  15. Testing Web Application Accessibility | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Testing Web Application Accessibility Testing Web Application Accessibility Section 508 requires all federal agencies to make their electronic and information technologies accessible to people with disabilities. EERE has specific guidelines for testing applications for accessibility. Use this checklist to see if your applications meet Section 508 requirements. Testing Web Application Accessibility (74.11 KB) More Documents & Publications Web Content Analysis and Inventories: Template and FY

  16. Atmospheric tracer technology and applications

    SciTech Connect (OSTI)

    Heiken, J.H.

    1986-01-01

    This book presents information on atmospheric tracer technology and applications. It summarizes the state of the art, provides information exchange for members of the atmospheric community, defines areas for future applications of tracers, and identifies requirements for tracer techniques. A major objective of research in atmospheric science over the past several decades has been to obtain an enhanced description of transport, transformation, and deposition of trace constituents present in the atmosphere. Interest in these processes has been hightened with the recognition that pollutant materials transported over long distances may exert significant effects at receptor locations, and the consequent desire to improve knowledge of source-receptor relationships. There is a wide range of practical applications for tracer experiments. In many cases the tracer allows 1) the documentation of a potential airborne hazard without actually emitting hazardous material or 2) the evaluation of the expected outcome of an expensive process alteration. Some examples of the former case are testing of rocket fuels, developing chemical defense strategies, establishing safety procedures for possible accidents in the handling and transportation of hazardous materials, and assessing the fire and explosion hazards present in handling special materials such as liquified natural gas. The practical use of tracers for economic benefit includes designing emissions systems, for both air quality control and dissemination systems such as in forest and crop spraying or cloud seeding, and siting of industrial facilities. Other applications include source attribution, which is currently of interest in the acid rain problem.

  17. Neoclassical Theory and Its Applications

    SciTech Connect (OSTI)

    Shaing, Ker-Chung

    2015-11-20

    The grant entitled Neoclassical Theory and Its Applications started on January 15 2001 and ended on April 14 2015. The main goal of the project is to develop neoclassical theory to understand tokamak physics, and employ it to model current experimental observations and future thermonuclear fusion reactors. The PI had published more than 50 papers in refereed journals during the funding period.

  18. applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    dark Systems Surface Processing Microfabrication Investigate mechanisms for photodynamic cancer therapy FEL Medical Uses Light Therapy Evaluate the potential use of Terahertz...

  19. Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Materials Science Compilers Programming Models Version Control Tools Programming Libraries Performance and Debugging Tools Grid Software and Services NERSC Software Downloads Software Page Template Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612

  20. Homeland Security and Defense Applications

    SciTech Connect (OSTI)

    2014-11-06

    Homeland Security and Defense Applications personnel are the best in the world at detecting and locating dirty bombs, loose nukes, and other radiological sources. The site trains the Nation's emergency responders, who would be among the first to confront a radiological or nuclear emergency. Homeland Security and Defense Applications highly training personnel, characterize the threat environment, produce specialized radiological nuclear detection equipment, train personnel on the equipment and its uses, test and evaluate the equipment, and develop different kinds of high-tech equipment to defeat terrorists. In New York City for example, NNSS scientists assisted in characterizing the radiological nuclear environment after 9/11, and produced specialized radiological nuclear equipment to assist local officials in their Homeland Security efforts.

  1. Homeland Security and Defense Applications

    ScienceCinema (OSTI)

    None

    2016-07-12

    Homeland Security and Defense Applications personnel are the best in the world at detecting and locating dirty bombs, loose nukes, and other radiological sources. The site trains the Nation's emergency responders, who would be among the first to confront a radiological or nuclear emergency. Homeland Security and Defense Applications highly training personnel, characterize the threat environment, produce specialized radiological nuclear detection equipment, train personnel on the equipment and its uses, test and evaluate the equipment, and develop different kinds of high-tech equipment to defeat terrorists. In New York City for example, NNSS scientists assisted in characterizing the radiological nuclear environment after 9/11, and produced specialized radiological nuclear equipment to assist local officials in their Homeland Security efforts.

  2. Drum inspection robots: Application development

    SciTech Connect (OSTI)

    Hazen, F.B.; Warner, R.D.

    1996-02-01

    Throughout the Department of Energy (DOE), drums containing mixed and low level stored waste are inspected, as mandated by the Resource Conservation and Recovery Act (RCRA) and other regulations. The inspections are intended to prevent leaks by finding corrosion long before the drums are breached. The DOE Office of Science and Technology (OST) has sponsored efforts towards the development of robotic drum inspectors. This emerging application for mobile and remote sensing has broad applicability for DOE and commercial waste storage areas. Three full scale robot prototypes have been under development, and another project has prototyped a novel technique to analyze robotically collected drum images. In general, the robots consist of a mobile, self-navigating base vehicle, outfitted with sensor packages so that rust and other corrosion cues can be automatically identified. They promise the potential to lower radiation dose and operator effort required, while improving diligence, consistency, and documentation.

  3. Technology applications bulletins: Number one

    SciTech Connect (OSTI)

    Koncinski, W. Jr.

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers.

  4. Reactor Application for Coaching Newbies

    SciTech Connect (OSTI)

    2015-06-17

    RACCOON is a Moose based reactor physics application designed to engage undergraduate and first-year graduate students. The code contains capabilities to solve the multi group Neutron Diffusion equation in eigenvalue and fixed source form and will soon have a provision to provide simple thermal feedback. These capabilities are sufficient to solve example problems found in Duderstadt & Hamilton (the typical textbook of senior level reactor physics classes). RACCOON does not contain any advanced capabilities as found in YAK.

  5. Tailored Ceramics for Laser Applications

    SciTech Connect (OSTI)

    Hollingsworth, Joel

    2007-12-10

    Transparent ceramics match or exceed the performance of single-crystal materials in laser applications, with a more-robust fabrication process. Controlling the distribution of optical dopants in transparent ceramics would allow qualitative improvements in amplifier slab design by allowing gain and loss to be varied within the material. My work aims to achieve a controlled pattern or gradient of dopant prior to sintering, in order to produce tailored ceramics.

  6. SRNL ALL-PATHWAYS APPLICATION

    SciTech Connect (OSTI)

    Koffman, L; Elmer Wilhite, E; Leonard Collard, L

    2007-05-29

    The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) performs performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. One of the performance objectives in the DOE Order is that the radiological dose to representative members of the public shall not exceed 25 mrem in a year total effective dose equivalent from all exposure pathways, excluding radon. Analysis to meet this performance objective is generally referred to as all-pathways analysis. SRNL performs detailed transient groundwater transport analysis for the waste disposal units, which has been used as input for the groundwater part of all-pathways analysis. The desire to better integrate all-pathways analysis with the groundwater transport analysis lead to the development of a software application named the SRNL All-Pathways Application. Another requirement of DOE Order 435.1 is to assess the impact of nuclear waste disposal on water resources, which SRS has interpreted for groundwater protection as meeting the EPA regulations for radionuclides in drinking water. EPA specifies four separate criteria as part of their implementation guidance for radionuclides, which are specified as maximum contaminant levels (MCL). (1) Beta/gamma emitters have a combined dose limit of 4 mrem/year. (2) Alpha emitters have a combined concentration limit of 15 pCi/L (called gross alpha), excluding uranium and radon, but including radium-226. (3) Combined radium-226 and radium-228 have a concentration limit of 5 pCi/L. (4) Isotopes of uranium have a combined concentration limit of 30 {micro}g/L. The All-Pathways Application was designed to be an easy-to-use software application that utilizes transient concentration results from groundwater transport analysis to (1) calculate the groundwater part of all-pathways dose and to (2) evaluate the four EPA criteria for groundwater protection.

  7. Panel 4 - applications to transportation

    SciTech Connect (OSTI)

    Nichols, F.; Au, J.; Bhattacharya, R.; Bhushan, B.; Blunier, D.; Boardman, B.; Brombolich, L.; Davidson, J.; Graham, M.; Hakim, N.; Harris, K.; Hay, R.; Herk, L.; Hojnacki, H.; Rourk, D.; Kamo, R.; Nieman, B.; O`Neill, D.; Peterson, M.B.; Pfaffenberger, G.; Pryor, R.W.; Russell, J.; Syniuta, W.; Tamor, M.; Vojnovich, T.; Yarbrough, W.; Yust, C.S.

    1993-01-01

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  8. transims-application-and-development

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    TRANSIMS: Applications and Development Workshop : April 8-9, 2010 Organizers Dr. Hubert Ley Dr. Vadim Sokolov This email address is being protected from spambots. You need JavaScript enabled to view it. Brian Gardner Office of Planning Federal Highway Administration This email address is being protected from spambots. You need JavaScript enabled to view it. Agenda Announcement pdficon small Accompanying Materials Adobe Connect Recording Links Accompanying Materials Introduction to the TRANSIMS

  9. Nanobiocatalysis and Its Potential Applications

    SciTech Connect (OSTI)

    Kim, Jungbae; Grate, Jay W.; Wang, Ping

    2008-11-01

    Nanobiocatalysis with enzymes incorporated into nanostructured materials have emerged as a rapidly growing area. Structures including nanoporous media, nanofibers, carbon nanotubes, and nanoparticles have been found to be efficient in manipulating the nanoscale environment of the enzyme and thus promising exciting advances in many areas of enzyme technology. This review will describe these recent developments in nanobiocatalysis and their potential applications in various fields such as trypsin digestion in proteomic analysis, antifouling, biofuel cells, and biosensors.

  10. SUPPLEMENT III REGARDING APPLICATION SUBMISSION

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    III REGARDING APPLICATION SUBMISSION SCHEDULE FOR: ADVANCED NUCLEAR ENERGY PROJECTS U.S. Department of Energy Loan Programs Office (As of January 19, 2016) THIRD SUPPLEMENT TO LOAN GUARANTEE SOLICITATION ANNOUNCEMENT FEDERAL LOAN GUARANTEES FOR ADVANCED NUCLEAR ENERGY PROJECTS Solicitation Number: DE-SOL- DE-SOL-0007791 OMB Control Number: 1910-5134; OMB Expiration Date 11/30/2016 Announcement Type: Supplemental Supplement Date: January 19, 2016 The above-referenced Loan Guarantee Solicitation

  11. Titanium metal: extraction to application

    SciTech Connect (OSTI)

    Gambogi, Joseph; Gerdemann, Stephen J.

    2002-09-01

    In 1998, approximately 57,000 tons of titanium metal was consumed in the form of mill products (1). Only about 5% of the 4 million tons of titanium minerals consumed each year is used to produce titanium metal, with the remainder primarily used to produce titanium dioxide pigment. Titanium metal production is primarily based on the direct chlorination of rutile to produce titanium tetrachloride, which is then reduced to metal using the Kroll magnesium reduction process. The use of titanium is tied to its high strength-to-weight ratio and corrosion resistance. Aerospace is the largest application for titanium. In this paper, we discuss all aspects of the titanium industry from ore deposits through extraction to present and future applications. The methods of both primary (mining of ore, extraction, and purification) and secondary (forming and machining) operations will be analyzed. The chemical and physical properties of titanium metal will be briefly examined. Present and future applications for titanium will be discussed. Finally, the economics of titanium metal production also are analyzed as well as the advantages and disadvantages of various alternative extraction methods.

  12. Quantum technology and its applications

    SciTech Connect (OSTI)

    Boshier, Malcolm; Berkeland, Dana; Govindan, Tr; Abo - Shaeer, Jamil

    2010-12-10

    Quantum states of matter can be exploited as high performance sensors for measuring time, gravity, rotation, and electromagnetic fields, and quantum states of light provide powerful new tools for imaging and communication. Much attention is being paid to the ultimate limits of this quantum technology. For example, it has already been shown that exotic quantum states can be used to measure or image with higher precision or higher resolution or lower radiated power than any conventional technologies, and proof-of-principle experiments demonstrating measurement precision below the standard quantum limit (shot noise) are just starting to appear. However, quantum technologies have another powerful advantage beyond pure sensing performance that may turn out to be more important in practical applications: the potential for building devices with lower size/weight/power (SWaP) and cost requirements than existing instruments. The organizers of Quantum Technology Applications Workshop (QTAW) have several goals: (1) Bring together sponsors, researchers, engineers and end users to help build a stronger quantum technology community; (2) Identify how quantum systems might improve the performance of practical devices in the near- to mid-term; and (3) Identify applications for which more long term investment is necessary to realize improved performance for realistic applications. To realize these goals, the QTAW II workshop included fifty scientists, engineers, managers and sponsors from academia, national laboratories, government and the private-sector. The agenda included twelve presentations, a panel discussion, several breaks for informal exchanges, and a written survey of participants. Topics included photon sources, optics and detectors, squeezed light, matter waves, atomic clocks and atom magnetometry. Corresponding applications included communication, imaging, optical interferometry, navigation, gravimetry, geodesy, biomagnetism, and explosives detection. Participants

  13. Primer on Wind Power for Utility Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    A Primer on Wind Power for Utility Applications Y. Wan Technical Report NRELTP-500-36230 December 2005 A Primer on Wind Power for Utility Applications Y. Wan Prepared under Task ...

  14. 2012 Advanced Applications Research & Development Peer Review...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Grid PMU Data - Ning Zhou, PNNL (1.23 MB) 2012 Advanced Applications R&D Peer Review - IEEE-IEC Harmonization - Ken Martin, EPG (1.51 MB) 2012 Advanced Applications R&D Peer ...

  15. EERE Postdoctoral Research Award Application Components

    Energy.gov [DOE]

    A complete application consists of the following documents. Use this checklist PDF to keep track of the required documents.

  16. Adjustable Speed Pumping Applications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Pumping Applications Adjustable Speed Pumping Applications This tip sheet provides practical tips on the application of adjustable speed drives in industrial pumping systems. PUMPING SYSTEMS TIP SHEET #11 Adjustable Speed Pumping Applications (January 2007) (276.35 KB) More Documents & Publications Control Strategies for Centrifugal Pumps with Variable Flow Rate Requirements Adjustable Speed Drive Part-Load Efficiency Improving Pumping System Performance: A Sourcebook for Industry - Second

  17. Writing reports to facilitate patent applications.

    SciTech Connect (OSTI)

    Libman, George H.; Doerry, Armin Walter

    2004-06-01

    Brief disclosures may often be sufficient for the filing of a Technical Advance with Sandia's Intellectual Property Center, but still be inadequate to facilitate an optimum patent application where more detail and explanation are required. Consequently, the crafting of a patent application may require considerably more additional interaction between the application preparer and the inventors. This inefficiency can be considerably mitigated if the inventors address some critical aspects of a patent application when they write a technical report.

  18. VFP Application Process | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Visting Faculty Application Process Faculty applicant identifies and develops a parternship with an Argonne researcher who will support the summer appointment. Faculty applicant and Argonne researcher write a 5 to 6 research proposal outlining the rearch project and timeline. We recommend that the proposal process should be started before December 18, 2016. Argonne National Laboratory is closed December 23, 2016 - January 2, 2017 for Winter Holiday. Faculty applicant obtains an account within

  19. Applications from Universities and Other Research Institutions...

    Office of Science (SC) [DOE]

    Applications from Universities and Other Research Institutions Basic Energy Sciences (BES) BES Home ... Award Search Public Abstracts Additional Requirements and ...

  20. Electric Transportation Applications All Rights Reserved ETA...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    4 Revision 3 Effective March 1, 1997 Electric Vehicle Constant Speed Range Tests Prepared by Electric Transportation Applications Prepared by: ...

  1. Electric Transportation Applications All Rights Reserved ETA...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    5 Revision 2 Effective March 1, 1997 "Electric Vehicle Rough Road Course Test" Prepared by Electric Transportation Applications Prepared by: ...

  2. Scientific Exchange Application | Photosynthetic Antenna Research...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    ... Other Expenses (itemize and include justification) * Other Expenses Subtotal * All ... Program Scientific Exchange Application Awardees Travel Policies & Tips Budget Guidelines

  3. LED Essentials - Technology, Applications, Advantages, Disadvantages |

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Department of Energy Essentials - Technology, Applications, Advantages, Disadvantages LED Essentials - Technology, Applications, Advantages, Disadvantages On October 11, 2007, Kevin Dowling, VP of Innovation for Philips Solid-State Lighting Solutions, presented a broad introduction to LED technology, and discussed the technology status, advantages and disadvantages, current applications, future potential, and evolving path of LED technology from indicator lights to general illumination. View

  4. FOA Applicant Webinar Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    FOA Applicant Webinar Presentation FOA Applicant Webinar Presentation FOA Applicant Webinar Presentation.pdf (1.46 MB) More Documents & Publications Hydrogen and Fuel Cell Technologies Research, Development, and Demonstrations Funding Opportunity Announcement Webinar Slides Funding Opportunity Webinar - Building America Industry Partnerships for High Performance Housing Innovations Funding Opportunity Webinar - Building America Industry Partnerships for High Performance Housing Innovations

  5. Oak Ridge Associated Universities Procurement Questionnaire Application

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    System Supplier Profile PIA, Oak ridge Operations Office | Department of Energy Associated Universities Procurement Questionnaire Application System Supplier Profile PIA, Oak ridge Operations Office Oak Ridge Associated Universities Procurement Questionnaire Application System Supplier Profile PIA, Oak ridge Operations Office Oak Ridge Associated Universities Procurement Questionnaire Application System Supplier Profile PIA, Oak ridge Operations Office Oak Ridge Associated Universities

  6. Grant Application Process | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Grant Application Process Please visit www.grants.gov off site link to find out more about the grant application process. At www.grants.gov off site link you can find grant opportunities, register to apply for federal grants, apply for grants, track your application and more

  7. Internal Applicants | Argonne National Laboratory

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    FAQs Answers to frequently asked questions about applying for a job at Argonne A Note About Privacy We do not ask you for personally identifiable information such as birthdate, social security number, or driver's license number. To ensure your privacy, please do not include such information in the documents that you upload to the system. A Note About File Size Our application system has a file size limit of 820KB. While this is sufficient for the vast majority of documents, we have found that

  8. Reactor Application for Coaching Newbies

    Energy Science and Technology Software Center (OSTI)

    2015-06-17

    RACCOON is a Moose based reactor physics application designed to engage undergraduate and first-year graduate students. The code contains capabilities to solve the multi group Neutron Diffusion equation in eigenvalue and fixed source form and will soon have a provision to provide simple thermal feedback. These capabilities are sufficient to solve example problems found in Duderstadt & Hamilton (the typical textbook of senior level reactor physics classes). RACCOON does not contain any advanced capabilities asmore » found in YAK.« less

  9. Solar photovoltaics for development applications

    SciTech Connect (OSTI)

    Shepperd, L.W.; Richards, E.H.

    1993-08-01

    This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

  10. Midwest Clean Energy Application Center

    SciTech Connect (OSTI)

    Cuttica, John; Haefke, Cliff

    2013-12-31

    The Midwest Clean Energy Application Center (CEAC) was one of eight regional centers that promoted and assisted in transforming the market for combined heat and power (CHP), waste heat to power (WHP), and district energy (DE) technologies and concepts throughout the United States between October 1, 2009 and December 31, 2013. The key services the CEACs provided included: Market Opportunity Analyses – Supporting analyses of CHP market opportunities in diverse markets including industrial, federal, institutional, and commercial sectors. Education and Outreach – Providing information on the energy and non-energy benefits and applications of CHP to state and local policy makers, regulators, energy end-users, trade associations and others. Information was shared on the Midwest CEAC website: www.midwestcleanergy.org. Technical Assistance – Providing technical assistance to end-users and stakeholders to help them consider CHP, waste heat to power, and/or district energy with CHP in their facility and to help them through the project development process from initial CHP screening to installation. The Midwest CEAC provided services to the Midwest Region that included the states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin.

  11. PIA - WEB Physical Security Major Application | Department of...

    Energy Savers

    PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PIA - WEB Physical Security Major Application PDF icon PIA - WEB Physical Security Major...

  12. Climate Action Champions Request for Applications Informational Webinar

    Energy.gov [DOE]

    This Webinar will provide prospective Applicants with an overview of the Climate Actions Champions Request for Applications, the application process and respond to questions posed by attendees.

  13. Application for Nonpurposeful Eagle Take Permit | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Eagle Take Permit Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Application for Nonpurposeful...

  14. Utah Application to Appropriate Water | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Utah Application to Appropriate Water Abstract Required application for obtaining a right to appropriate water in Utah. Form Type ApplicationNotice Form Topic Filing for Water...

  15. EERE Science and Technology Policy (STP) Fellowships Application...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    EERE Science and Technology Policy (STP) Fellowships Application Form EERE Science and Technology Policy (STP) Fellowships Application Form Applications are accepted and reviewed ...

  16. DLFM library tools for large scale dynamic applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    DLFM library tools for large scale dynamic applications DLFM library tools for large scale dynamic applications Large scale Python and other dynamic applications may spend huge ...

  17. Alaska Special Area Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Form: Alaska Special Area Permit Application Form Type ApplicationNotice Form Topic Fish and Game Special Area Permit Application Organization Alaska Department of Fish and...

  18. Montana Restricted Use Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Use Permit Application Abstract Application for conducting commercial use with Montana Fish, Wildlife & Parks jurisdiction. Form Type ApplicationNotice Form Topic Restricted Use...

  19. Santa Fe Oversize/Overweight Permit Application | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Reference LibraryAdd to library Legal Document- Permit ApplicationPermit Application: Santa Fe OversizeOverweight Permit ApplicationLegal Published NA Year Signed or Took...

  20. Advanced Boost System Development for Diesel HCCI/LTC Application...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Boost System Development for Diesel HCCILTC Application Advanced Boost System Development for Diesel HCCILTC Application Optimization of a turbocharger for high EGR applications...

  1. Motion to Withdraw from Yucca Mountain application | Department...

    Office of Environmental Management (EM)

    Motion to Withdraw from Yucca Mountain application Motion to Withdraw from Yucca Mountain application DOE's withdraws it's pending license application for a permanent geologic ...

  2. Property:NEPA Application Url | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Application Url Jump to: navigation, search Property Name NEPA Application Url Property Type URL Description URLs to NEPA application files. All NOIs. Drilling permits are also...

  3. Signature molecular descriptor : advanced applications.

    SciTech Connect (OSTI)

    Visco, Donald Patrick, Jr.

    2010-04-01

    In this work we report on the development of the Signature Molecular Descriptor (or Signature) for use in the solution of inverse design problems as well as in highthroughput screening applications. The ultimate goal of using Signature is to identify novel and non-intuitive chemical structures with optimal predicted properties for a given application. We demonstrate this in three studies: green solvent design, glucocorticoid receptor ligand design and the design of inhibitors for Factor XIa. In many areas of engineering, compounds are designed and/or modified in incremental ways which rely upon heuristics or institutional knowledge. Often multiple experiments are performed and the optimal compound is identified in this brute-force fashion. Perhaps a traditional chemical scaffold is identified and movement of a substituent group around a ring constitutes the whole of the design process. Also notably, a chemical being evaluated in one area might demonstrate properties very attractive in another area and serendipity was the mechanism for solution. In contrast to such approaches, computer-aided molecular design (CAMD) looks to encompass both experimental and heuristic-based knowledge into a strategy that will design a molecule on a computer to meet a given target. Depending on the algorithm employed, the molecule which is designed might be quite novel (re: no CAS registration number) and/or non-intuitive relative to what is known about the problem at hand. While CAMD is a fairly recent strategy (dating to the early 1980s), it contains a variety of bottlenecks and limitations which have prevented the technique from garnering more attention in the academic, governmental and industrial institutions. A main reason for this is how the molecules are described in the computer. This step can control how models are developed for the properties of interest on a given problem as well as how to go from an output of the algorithm to an actual chemical structure. This report

  4. Applications of solar reforming technology

    SciTech Connect (OSTI)

    Spiewak, I.; Tyner, C.E.; Langnickel, U.

    1993-11-01

    Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

  5. Proactive DSA application and implementation

    SciTech Connect (OSTI)

    Draelos, T.; Hamilton, V.; Istrail, G.

    1998-05-03

    Data authentication as provided by digital signatures is a well known technique for verifying data sent via untrusted network links. Recent work has extended digital signatures to allow jointly generated signatures using threshold techniques. In addition, new proactive mechanisms have been developed to protect the joint private key over long periods of time and to allow each of the parties involved to verify the actions of the other parties. In this paper, the authors describe an application in which proactive digital signature techniques are a particularly valuable tool. They describe the proactive DSA protocol and discuss the underlying software tools that they found valuable in developing an implementation. Finally, the authors briefly describe the protocol and note difficulties they experienced and continue to experience in implementing this complex cryptographic protocol.

  6. Jack Deslippe Application Performance Group

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Application Performance Group NERSC Optimizing Excited-State Electronic-Structure Codes for Intel Knights Landing What is GW Materials: InSb, InAs Ge GaSb Si InP GaAs CdS AlSb, AlAs CdSe, CdTe BP SiC C 60 GaP AlP ZnTe, ZnSe c-GaN, w-GaN InS w-BN, c-BN diamond w-AlN LiCl Fluorite LiF DFT GW The "GW" method is an accurate approach for simulate the "excited state" properties of materials. Examples: - What happens when you add or remove an electron from a system - How do

  7. Wind/Hybrid Electricity Applications

    SciTech Connect (OSTI)

    McDaniel, Lori

    2001-03-31

    Wind energy is widely recognized as the most efficient and cost effective form of new renewable energy available in the Midwest. New utility-scale wind farms (arrays of large turbines in high wind areas producing sufficient energy to serve thousands of homes) rival the cost of building new conventional forms of combustion energy plants, gas, diesel and coal power plants. Wind energy is not subject to the inflationary cost of fossil fuels. Wind energy can also be very attractive to residential and commercial electric customers in high wind areas who would like to be more self-sufficient for their energy needs. And wind energy is friendly to the environment at a time when there is increasing concern about pollution and climate change. However, wind energy is an intermittent source of power. Most wind turbines start producing small amounts of electricity at about 8-10 mph (4 meters per second) of wind speed. The turbine does not reach its rated output until the wind reaches about 26-28 mph (12 m/s). So what do you do for power when the output of the wind turbine is not sufficient to meet the demand for energy? This paper will discuss wind hybrid technology options that mix wind with other power sources and storage devices to help solve this problem. This will be done on a variety of scales on the impact of wind energy on the utility system as a whole, and on the commercial and small-scale residential applications. The average cost and cost-benefit of each application along with references to manufacturers will be given. Emerging technologies that promise to shape the future of renewable energy will be explored as well.

  8. NPAR- products, applications and closure

    SciTech Connect (OSTI)

    Vora, J.P.

    1995-04-01

    Almost a decade ago the Office of Nuclear Regulatory Research (RES) developed and implemented a comprehensive research program (NUREG-1144) widely known as NPAR or Nuclear Plant Aging Research. The NPAR program is a structured research program specifically oriented to understanding significant age-related degradation mechanisms and their long term effects on properties and performance of important components and systems and ways to mitigate detrimental effects of aging. It provided a road map and a phased approach to research that is applicable to any structure, system, or component of interest. This hardware-oriented engineering research program led the industry worldwide and communicated a need to understand and manage age-related degradation effects in selected but important structures and components. At the conclusion (1995) of the NPAR program, 22 electrical and mechanical components, 13 safety-related systems, and 10 special topics will have been studied and results summarized in 160 technical reports. This reference library of information listed and summarized in NUREG-1377, Rev. No. 4 provides a foundation upon which individual programs can be built for the specific needs of a utility, a regulator, or equipment manufacturers. During the life of the NPAR program, it has provided technical bases and support for license renewal, codes and standards, resolution of generic safety issues, information notices, regulatory guides and the standard Review Plan, as well as the Office of Nuclear Reactor Regulation and The NRC Regions. All ongoing NPAR activities will either be completed or terminated by the end of 1995. No new initiative will be undertaken. This paper summarizes NPAR products and accomplishments, application of the research results, and its status and closure.

  9. Potential applications of concentrated solar photons

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    In 1989, the National Research Council formed a committee, upon the request of the Department of Energy (DOE), to assess potential applications of concentrated solar photons beyond the production of electricity. The committee interpreted the term applications to be those of commercial value, that is, applications in which the use of concentrated solar photons leads to a new product or process, creating a new market; cost reduction for an existing product or process; improvement in a product or process; or provision of a technical service. The goal of this study was to determine whether special advantages might result when concentrated solar photons are the source of energy for photochemical, photoelectrochemical, and thermal processes. The study undertook to assess the state of the art of potential applications, such as war and waste treatment. Other possible applications of solar photons, such as materials processing and solar pumping of lasers, also were considered. This work describes these applications.

  10. Source Water and Groundwater Withdrawal Permit Application Process...

    Open Energy Information (Open El) [EERE & EIA]

    Permit Application Process Guidance Citation Vermont Department of Environmental Conservation. 2015. Source Water and Groundwater Withdrawal Permit Application Process...

  11. Integrating Nanomaterial Applications in the Field of Sustainable...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Integrating Nanomaterial Applications in the Field of Sustainable Biomaterials Integrating Nanomaterial Applications in the Field of Sustainable Biomaterials Integrating ...

  12. Application Programming Interface | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Commercial Buildings » Analysis Tools » Building Performance Database » Application Programming Interface Application Programming Interface While the BPD platform offers various browser-based analysis tools, third parties can also access the database through an Application Programming Interface (API). Using the API, users can query the same analytical tools available through the web interface, without compromising the security or anonymity of the database. The API enables the sharing of

  13. Application for Federal Assistance SF-424

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Number: 4040-0004 Expiration Date: 8/31/2016 * 1. Type of Submission: * 2. Type of Application: * 3. Date Received: 4. Applicant Identifier: 5a. Federal Entity Identifier: 5b. Federal Award Identifier: 6. Date Received by State: 7. State Application Identifier: * a. Legal Name: * b. Employer/Taxpayer Identification Number (EIN/TIN): * c. Organizational DUNS: * Street1: Street2: * City: County/Parish: * State: Province: * Country: * Zip / Postal Code: Department Name: Division Name: Prefix: *

  14. Data requirements for intermediate energy nuclear applications

    SciTech Connect (OSTI)

    Pearlstein, S.

    1990-01-01

    Several applications that include spallation neutron sources, space radiation effects, biomedical isotope production, accelerator shielding and radiation therapy make use of intermediate energy nuclear data extending to several GeV. The overlapping data needs of these applications are discussed in terms of what projectiles, targets and reactions are of interest. Included is a discussion of what is generally known about these data and what is needed to facilitate their use in intermediate energy applications. 40 refs., 2 figs., 2 tabs.

  15. Workshop: Synchrotron Applications in Chemical Catalysis | Stanford

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Synchrotron Radiation Lightsource Synchrotron Applications in Chemical Catalysis Tuesday, October 25, 2011 - 8:00am 2011 SSRL/LCLS Annual Users Conference This workshop, part of the 2011 SSRL/LCLS Annual Users Conference, will focus on understanding processes in homogeneous (both biological and small molecule) and heterogeneous catalysis, using synchrotron-based methods. The workshop will cover more traditional applications (using XANES and EXAFS), as well as applications of XES, RIXS and

  16. Certificate Program Application | Photosynthetic Antenna Research Center

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Certificate Program Application Certificate Program Application Students who are interested in certificate program should submit the following online application. Please note that other forms are available HERE. Last Name (as it appears in SIS) * First Name (as it appears in SIS) * Student Number * Phone Number Email Address (WUSTL account) * School/College Major(s)/Minor(s) Expected Graduation Date Leave this field blank Submit

  17. Introduction to Chemistry and Material Sciences Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Intro Chem and MatSci Apps Introduction to Chemistry and Material Sciences Applications June 26, 2012 Last edited: 2016-04-29 11:34:4

  18. Aftertreatment Modeling Status, Futur Potential, and Application...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Aftertreatment Modeling Status, Futur Potential, and Application Issues 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: DaimlerChrysler NAFTA Truck Business ...

  19. Semantic Historian for IoT Applications

    Energy.gov (indexed) [DOE]

    and maintained by SmartCloud - Applications hosted either at customer premise, in cloud, or at secured data center * Investment from Rockwell Automation in 2013 3 > Customers...

  20. 2012 Advanced Applications Research & Development Peer Review...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Method - Yuri Makarov, PNNL PDF icon 2012 Advanced Applications R&D Peer Review - Modal Analysis for Grid Operations (MANGO) - Henry Huang, PNNL PDF icon 2012 Advanced ...

  1. Nanocrystal and Molecular Precursors for Photovoltaic Applications...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Nanocrystal and Molecular Precursors for Photovoltaic Applications The objective in this proposal is to identify factors that limit the efficiency of nanocrystal based solar cells...

  2. CSLC Application Guidelines | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    current through August 5, 2014. Published NA Year Signed or Took Effect 2014 Legal Citation California State Lands Commission Application Guidelines (2014) DOI Not Provided...

  3. Green Button Applications | OpenEI Community

    Open Energy Information (Open El) [EERE & EIA]

    Green Button Applications Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll Question Keywords Author...

  4. Workshop on Scientific Applications of the LCLS

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    WORKSHOP ON SCIENTIFIC APPLICATIONS OF THE LCLS Stanford Linear Accelerator Center, January 12-14, 1999 I. Lindau and J. Arthur, principal organizers INTRODUCTION Free electron...

  5. Workshop: Synchrotron Applications in Chemical Catalysis | Stanford...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Applications in Chemical Catalysis Tuesday, October 25, 2011 - 8:00am 2011 SSRLLCLS Annual Users Conference This workshop, part of the 2011 SSRLLCLS Annual Users...

  6. DOE Clean Energy Regional Application Centers (RACs)

    SciTech Connect (OSTI)

    2010-07-01

    This is a fact sheet on the U.S. Department of Energy's eight clean energy regional application centers, or RACs.

  7. Using Mobile Applications to Generate Customer Demand

    Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Using Mobile Applications to Generate Customer Demand, Call Slides and Discussion Summary, March 12, 2015.

  8. NREL: Photovoltaics Research - Materials Applications and Performance...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    about the scientists specializing in each area of PV research: National Center for Photovoltaics research staff Materials Applications and Performance research staff Materials...

  9. Earth-abundant semiconductors for photovoltaic applications ...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Earth-abundant semiconductors for photovoltaic applications Thin film photovoltaics (solar cells) has the potential to revolutionize our energy landscape by producing clean,...

  10. DOE Qualified List of ESCOs Application Forms

    Energy.gov [DOE]

    Applications for the U.S. Department of Energy (DOE) Qualified List of Energy Service Companies (ESCOs) are accepted throughout the year.

  11. Fellowship Application Instructions | Argonne Leadership Computing...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    following documents on the application webpage. Cover letter (optional) Curriculum vitae including a list of ... List of three reference names and email addresses. Referees ...

  12. Applications for Postdoctoral Fellowship in Computational Science...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Applications for Postdoctoral Fellowship in Computational Science at Berkeley Lab due November 26 October 15, 2012 by Francesca Verdier Researchers in computer science, applied ...

  13. Application of plasmonic subwavelength structuring to enhance...

    Office of Scientific and Technical Information (OSTI)

    Title: Application of plasmonic subwavelength structuring to enhance infrared detection. Abstract not provided. Authors: Peters, David William ; Davids, Paul S. ; Kim, Jin Kuk ; ...

  14. Concentrating Solar Power Commercial Application Study: Reducing...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Concentrating Solar Power Commercial Application Study: Reducing Water Consumption of Concentrating Solar Power Electricity Generation Report to Congress U.S. Department of Energy ...

  15. Montana Water Quality Permit Application, Nondegradation Authorization...

    Open Energy Information (Open El) [EERE & EIA]

    Water Quality Permit Application, Nondegradation Authorization, and Permit Fees Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

  16. Vermont Water Quality Certification Application for Hydroelectric...

    Open Energy Information (Open El) [EERE & EIA]

    Water Quality Certification Application for Hydroelectric Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Vermont Water Quality Certification...

  17. Additional Guidance Regarding Application of Current Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance...

  18. Geographical Applications of Remote Sensing (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Geographical Applications of Remote ... DOE Contract Number: AC05-76RL01830 Resource Type: Journal Article Resource Relation: ...

  19. BLM - Paleontological Resources Use Permit Application | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Notice Form Topic Paleontological Resources Use Permit Application Organization Bureau of Land Management Published Publisher Not Provided, 1994 DOI Not Provided Check for...

  20. Porous Polymer Networks: Synthesis, Porosity, and Applications...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Porous Polymer Networks: Synthesis, Porosity, and Applications in Gas StorageSeparation Previous Next List Weigang Lu, Daqiang Yuan, Dan Zhao, Christine Inge Schilling, Oliver...

  1. Arizona Corporation Commission Application for a Certificate...

    Open Energy Information (Open El) [EERE & EIA]

    Application for a Certificate of Convenience and Necessity for Competitive Retail Electricity Services Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal...

  2. Introduction to computed microtomography and applications in...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Related Information: CMS Workshop Lectures, Advanced Applications of Synchrotron Radiation in Clay Science Publisher: 2014; Tha Clay Minerals Society ;Urbana, IL ...

  3. Colorado - Access Permit Application File Review Checklist |...

    Open Energy Information (Open El) [EERE & EIA]

    Jump to: navigation, search OpenEI Reference LibraryAdd to library General: Colorado - Access Permit Application File Review Checklist Author Colorado Department of Transportation...

  4. Verifying the ENERGY STAR Certification Application

    Energy.gov [DOE]

    Do you verify commercial building applications for ENERGY STAR certification? This webinar, based on the ENERGY STAR Guide for Licensed Professionals, covers the role of the licensed professional,...

  5. Full Permit Application Handbook | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    HandbookLegal Abstract Permit Applicant Hnadbook for Full RCRA Equivalent Hazardous Waste Facility Permits, current through August 7, 2014. Published NA Year Signed or Took...

  6. ODEQ - Construction Stormwater Application and Forms Manual ...

    Open Energy Information (Open El) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermitting...

  7. Oregon Underground Injection Control Registration Application...

    Open Energy Information (Open El) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library Form: Oregon Underground Injection Control Registration Application Fees (DEQ Form UIC 1003-GIC) Abstract Required fees and form...

  8. Montana - Encroachment Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Jump to: navigation, search OpenEI Reference LibraryAdd to library General: Montana - Encroachment Permit Application Author Montana Department of Transportation...

  9. Introduction to Chemistry and Material Sciences Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Intro Chem and MatSci Apps Introduction to Chemistry and Material Sciences Applications June 26, 2012 Last edited: 2016-04-29 11:34:4

  10. Precise Application of Transparent Conductive Oxide Coatings...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Precise Application of Transparent Conductive Oxide Coatings for Flat Panel Displays and Photovoltaic Cells Technology available for licensing: New transparent conducting oxide ...

  11. Smart Applications Co Ltd | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Co Ltd Jump to: navigation, search Name: Smart Applications Co Ltd Place: Cheonan, South Chungcheong, Korea (Republic) Product: Korean manufacturer of PV ingots and wafers; other...

  12. Byfl: Compiler-based Application Analysis

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Feynman Center (505) 665-9090 Email Byfl: Compiler-based Application Analysis Byfl is a productivity tool that helps computational scientists analyze their code for...

  13. Microsoft Word - Northern Pass Amended Application - FINAL

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    UNITED STATES OF AMERICA BEFORE THE DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY NORTHERN PASS TRANSMISSION LLC DOCKET NO. PP-371 AMENDED APPLICATION JULY 1, 2013 i TABLE OF CONTENTS Page No. LIST OF EXHIBITS iii LIST OF ABBREVIATIONS iv INTRODUCTION 1 OVERVIEW OF AMENDMENTS TO APPLICATION 1 SECTION 1 - INFORMATION REGARDING THE APPLICANT 1.1 Legal Name of the Applicant 6 1.2 Legal Names of All Partners 6 1.3 Communications and Correspondence 7 1.4 Foreign Ownership

  14. Virtual Environment for Reactor Applications (VERA

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Environment for Reactor Applications (VERA) Modern high performance computing (HPC) platforms bring an opportunity for modeling and simulation (modsim) at levels of detail...

  15. Investigation of gigawatt millimeter wave source applications

    SciTech Connect (OSTI)

    Bruder, J.A.; Belcher, M.L.

    1991-09-01

    The Georgia Tech Research Institute (GTRI) investigated potential applications of millimeter wave (MMW) sources with peak powers on the order of a gigawatt. This power level is representative of MMW devices such as the free electron laser (FEL) and the cyclotron auto-resonance maser (CARM) that are under development at the Lawrence Livermore National Laboratory (LLNL). In addition to determining the technical requirements for these applications, the investigation considered potential users and how a high power MMW system would expand their current capabilities. Two of the more promising applications were examined in detail to include trade-off evaluations system parameters. The trade-off evaluations included overall system configuration, frequency and coherence, component availability, and performance estimates. Brainstorming sessions were held to try and uncover additional applications for a gigawatt MMW source. In setting up guidelines for the session, the need to attempt to predict applications for the years 2000 to 2030 was stressed. Also, possible non-DoD applications needed to be considered. While some of these applications could not in themselves justify the costs involved in the development of the radar system, they could be considered potential secondary applications of the system. As a result of the sessions, a number of interesting potential applications evolved including: space object identification; low angle tracking; illuminator for space-based radar; radio astronomy; space vehicle navigation; space debris location; atmospheric research; wind shear detection; electronic countermeasures; low observable detection; and long range detection via ducting.

  16. Calibration services for medical applications of radiation

    SciTech Connect (OSTI)

    DeWerd, L.A.

    1993-12-31

    Calibration services for the medical community applications of radiation involve measuring radiation precisely and having traceability to the National Institute of Standards and Technology (NIST). Radiation therapy applications involve the use of ionization chambers and electrometers for external beams and well-type ionization chamber systems as well as radioactive sources for brachytherapy. Diagnostic x-ray applications involve ionization chamber systems and devices to measure other parameters of the x-ray machine, such as non-invasive kVp meters. Calibration laboratories have been established to provide radiation calibration services while maintaining traceability to NIST. New radiation applications of the medical community spur investigation to provide the future calibration needs.

  17. Introduction to applications and industries for Microelectromechanical...

    Office of Scientific and Technical Information (OSTI)

    Introduction to applications and industries for Microelectromechanical Systems (MEMS). ... Sponsoring Org: USDOE Country of Publication: United States Language: English Subject: 42 ...

  18. Improved Martensitic Steel for High Temperature Applications...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Improved Martensitic Steel for High Temperature Applications A stainless steel composition and heat treatment process for a high-temperature, titanium alloyed 9 Cr-1 molybdenum ...

  19. Dynamic Provisioning for Terascale Science Applications Using...

    Office of Scientific and Technical Information (OSTI)

    CircuitPacket Technologies and 100G Transmission Systems Citation Details In-Document Search Title: Dynamic Provisioning for Terascale Science Applications Using Hybrid Circuit...

  20. Public Notice Applicability Table | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    http:crossref.org Citation Retrieved from "http:en.openei.orgwindex.php?titlePublicNoticeApplicabilityTable&oldid792160" Feedback Contact needs updating Image...

  1. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Information (Open El) [EERE & EIA]

    search OpenEI Reference LibraryAdd to library Web Site: Arizona Department of Environmental Quality's Application Forms and Guidance Website Abstract This site contains forms...

  2. Electronic Records Management Software Applications Design Criteria...

    Energy Savers

    Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued under the authority of DoD Directive 5015.2, "Department of DefenseRecords ...

  3. Dry borax applicator operator's manual.

    SciTech Connect (OSTI)

    Karsky, Richard, J.

    1999-01-01

    Annosum root rot affects conifers throughout the Northern Hemisphere, infecting their roots and eventually killing the trees. The fungus Heterobasidion annosum causes annosum root rot. The fungus colonizes readily on freshly cut stumps. Partially cut stands have a high risk of infestation because the fungus can colonize on each of the stumps and potentially infect the neighboring trees. Wind and rain carry the annosum spores. Spores that land on freshly cut stumps grow down the stump's root system where they can infect living trees through root grafts or root contacts. Once annosum becomes established, it can remain active for many years in the Southern United States and for several decades in the north. About 7% of the trees that become infected die. When thinning, stumps can be treated successfully using a competing fungus, Phlebia gigantea, and with ''Tim-Bor'' in liquid formulations. These liquid products are no longer approved in the United States. Only the dry powder form is registered and approved by the EPA. Stumps can be treated with a dry formula of borax, (Sporax), significantly reducing one of the primary routes by which Heterobasidion annosum infects a stand of trees. Sporax is used by the USDA Forest Service to control annosum root rot. Sporax is now applied by hand, but once the felled trees are skidded it becomes very hard to locate the stumps. A stump applicator will reduce error, labor costs, and hazards to workers.

  4. Electronic and photonic power applications

    SciTech Connect (OSTI)

    Walko, R.J.; Ashley, C.S.; Brinker, C.J.; Reed, S.T.; Renschler, C.L. ); Shepodd, T.J. ); Ellefson, R.E.; Gill, J.T. ); Leonard, L.E. )

    1990-01-01

    Efficient conversion of radioactive decay to electrical power has been the goal of a number of past research efforts. One of these was the Elgin-Kidde nuclear battery. In this concept promethium-147 was used as a beta source which was then mixed with a phosphor to produce a radioluminescent (RL) source of light. The light source was coupled to silicon photovoltaic converters to create electricity. This photoelectric approach is being revisited using tritium based solid state compounds and advanced gas concepts to produce RL light sources being disclosed at this conference. Efficient conversion of the RL light energy to electrical energy imposes certain requirements on the semiconductor converter. These requirements will be discussed. Projections of power source electrical and physical characteristics will be presented based on reasonable design parameter assumptions. The words Power Supply'' usually evoke a vision of a rotating machine or chemical battery. However, today's technology is making increasing use of photonics, where information and even power can be moved through optical fibers. Brighter volumetric RL light sources open a whole new range of photonics-based applications, while solid state tritiated compounds provide the foundation for improved mechanical adaptability and safety. 4 refs., 6 figs., 1 tab.

  5. Diesel Engine Light Truck Application

    SciTech Connect (OSTI)

    2007-12-31

    The Diesel Engine Light Truck Application (DELTA) program consists of two major contracts with the Department of Energy (DOE). The first one under DE-FC05-97-OR22606, starting from 1997, was completed in 2001, and consequently, a final report was submitted to DOE in 2003. The second part of the contract was under DE-FC05-02OR22909, covering the program progress from 2002 to 2007. This report is the final report of the second part of the program under contract DE-FC05-02OR22909. During the course of this contract, the program work scope and objectives were significantly changed. From 2002 to 2004, the DELTA program continued working on light-duty engine development with the 4.0L V6 DELTA engine, following the accomplishments made from the first part of the program under DE-FC05-97-OR22606. The program work scope in 2005-2007 was changed to the Diesel Particulate Filter (DPF) soot layer characterization and substrate material assessment. This final report will cover two major technical tasks. (1) Continuation of the DELTA engine development to demonstrate production-viable diesel engine technologies and to demonstrate emissions compliance with significant fuel economy advantages, covering progress made from 2002 to 2004. (2) DPF soot layer characterization and substrate material assessment from 2005-2007.

  6. Temperature sensors for OTEC applications

    SciTech Connect (OSTI)

    Seren, L.; Panchal, C.B.; Rote, D.M.

    1984-05-01

    Ocean thermal energy conversion (OTEC) applications require accurate measurement of temperatures in the 0 to 30/sup 0/C range. This report documents an experimental examination of commercially available quartz-crystal thermometers and thermistors. Three fixed-point baths were used for temperature measurements: the distilled-water/distilled-ice-water slurry, the triple-point-of-water cell, and the gallium melting-point cell. The temperature of carefully prepared ice-water slurries was verified routinely as 0.001 +- 0.003/sup 0/C. Quartz-crystal probes proved accurate to about 1 to 2 mK, with drift errors of the same order over a few days. Bead- and disk-type thermistor probes were found to be about equally stable with time in the 0 to 30/sup 0/C range. The overall probable error of using thermistors was found to be +-4 mK. A solid-block temperature bath suitable for on-site calibrations in OTEC work was used in the temperature-sweeping mode. Various polynomial fits were examined for the purpose of thermistor calibration; fits of order two and higher yielded about equally accurate calculated temperatures.

  7. Preparation for commercial demonstration of biomass-to-ethanol conversion technology. Final report

    SciTech Connect (OSTI)

    1997-07-01

    The objective of this program was to complete the development of a commercially viable process to produce fuel ethanol from renewable cellulosic biomass. The program focused on pretreatment, enzymatic hydrolysis, and fermentation technologies where Amoco has a unique proprietary position. Assured access to low-cost feedstock is a cornerstone of attractive economics for cellulose to ethanol conversion in the 1990s. Most of Amoco`s efforts in converting cellulosic feedstocks to ethanol before 1994 focused on using paper from municipal solid waste as the feed. However, while many municipalities and MSW haulers expressed interest in Amoco`s technology, none were willing to commit funding to process development. In May, 1994 several large agricultural products companies showed interest in Amoco`s technology, particularly for application to corn fiber. Amoco`s initial work with corn fiber was encouraging. The project work plan was designed to provide sufficient data on corn fiber conversion to convince a major agriculture products company to participate in the construction of a commercial demonstration facility.

  8. Industrial Applications of Low Temperature Plasmas

    SciTech Connect (OSTI)

    Bardsley, J N

    2001-03-15

    The use of low temperature plasmas in industry is illustrated by the discussion of four applications, to lighting, displays, semiconductor manufacturing and pollution control. The type of plasma required for each application is described and typical materials are identified. The need to understand radical formation, ionization and metastable excitation within the discharge and the importance of surface reactions are stressed.

  9. Ion beam analysis techniques in interdisciplinary applications

    SciTech Connect (OSTI)

    Respaldiza, Miguel A.; Ager, Francisco J.

    1999-11-16

    The ion beam analysis techniques emerge in the last years as one of the main applications of electrostatic accelerators. A short summary of the most used IBA techniques will be given as well as some examples of applications in interdisciplinary sciences.

  10. Innovative applications stimulate coiled tubing development

    SciTech Connect (OSTI)

    Sas-Jaworsky, A. II; Bell, S.

    1996-06-01

    Coiled tubing (CT) is increasingly becoming a viable option to many conventional well operations worldwide. Advanced technology, new equipment and recent field applications have shown CT to be a lower-cost, reliable and effective tool for drilling and recompleting certain wells. Seven example applications from two recent coiled tubing technical conferences are described.

  11. Comparison of ferrite materials for pulse applications

    SciTech Connect (OSTI)

    Dinkel, J.A.; Jensen, C.C.

    1993-06-01

    Materials are the limiting factor in many pulse power projects. The magnetic materials available from several manufacturers were experimentally compared for their usefulness in high speed magnetic field applications. This particular application is a high speed kicker magnet for manipulation of a charged particle beam.

  12. Renewable Energy Loan Applications Due Today!

    Energy.gov [DOE]

    If you haven't submitted your Part I application for Department of Energy Loan Guarantee Program’s Renewables Solicitation yet, today is your last day! Round 8, Part I applications for DOE's Energy Efficiency, Renewable Energy and Advanced Transmission and Distribution Technologies Solicitation (2009) are due today by midnight EDT.

  13. Metagenomic applications in environmental monitoring and bioremediation

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | DOE PAGES Metagenomic applications in environmental monitoring and bioremediation Title: Metagenomic applications in environmental monitoring and bioremediation With the rapid advances in sequencing technology, the cost of sequencing has dramatically dropped and the scale of sequencing projects has increased accordingly. This has provided the opportunity for the routine use of sequencing techniques in the monitoring of environmental microbes. While metagenomic

  14. IDEA Clean Energy Application Center

    SciTech Connect (OSTI)

    Thornton, Robert

    2013-09-30

    The DOE Clean Energy Application Centers were launched with a goal of focusing on important aspects of our nation’s energy supply including Efficiency, Reliability and Resiliency. Clean Energy solutions based on Combined Heat & Power (CHP), District Energy and Waste Heat Recovery are at the core of ensuring a reliable and efficient energy infrastructure for campuses, communities, and industry and public enterprises across the country. IDEA members which include colleges and universities, hospitals, airports, downtown utilities as well as manufacturers, suppliers and service providers have long-standing expertise in the planning, design, construction and operations of Clean Energy systems. They represent an established base of successful projects and systems at scale and serve important and critical energy loads. They also offer experience, lessons learned and best practices which are of immense value to the sustained growth of the Clean Energy sector. IDEA has been able to leverage the funds from the project award to raise the visibility, improve the understanding and increase deployment CHP, District Energy and Waste Heat Recovery solutions across the regions of our nation, in collaboration with the regional CEAC’s. On August 30, 2012, President Obama signed an Executive Order to accelerate investments in industrial energy efficiency (EE), including CHP and set a national goal of 40 GW of new CHP installation over the next decade IDEA is pleased to have been able to support this Executive Order in a variety of ways including raising awareness of the goal through educational workshops and Conferences and recognizing the installation of large scale CHP and district energy systems A supporting key area of collaboration has involved IDEA providing technical assistance on District Energy/CHP project screenings and feasibility to the CEAC’s for multi building, multi-use projects. The award was instrumental in the development of a first-order screening

  15. Application of coal petrography to the evaluation of magnetically separated dry crushed coals

    SciTech Connect (OSTI)

    Harris, L.A.; Hise, E.C.

    1981-01-01

    In the present study the open gradient magnetic separation method has been used to beneficiate the -30 + 100 mesh fraction of two high volatile bituminous coals. The evaluation of the effectiveness of the magnetic separation for cleaning these coals is the subject of this paper. Coal petrography in combination with scanning electron microscopy and x-ray diffractometry were used to characterize the magnetically separated coal fractions. These analyses revealed that the majority of the pyrite and non-pyrite minerals were concentrated in the positive magnetic susceptibility fractions. The bulk of the starting samples (approx. 80 weight percent) were located in the negative magnetic susceptibility fractions and showed significant reductions in pyrite and non-pyritic minerals. The magnetic separation appears to effectively split the samples into relatively clean coal and refuse.

  16. Multicore Architecture-aware Scientific Applications

    SciTech Connect (OSTI)

    Srinivasa, Avinash

    2011-11-28

    Modern high performance systems are becoming increasingly complex and powerful due to advancements in processor and memory architecture. In order to keep up with this increasing complexity, applications have to be augmented with certain capabilities to fully exploit such systems. These may be at the application level, such as static or dynamic adaptations or at the system level, like having strategies in place to override some of the default operating system polices, the main objective being to improve computational performance of the application. The current work proposes two such capabilites with respect to multi-threaded scientific applications, in particular a large scale physics application computing ab-initio nuclear structure. The first involves using a middleware tool to invoke dynamic adaptations in the application, so as to be able to adjust to the changing computational resource availability at run-time. The second involves a strategy for effective placement of data in main memory, to optimize memory access latencies and bandwidth. These capabilties when included were found to have a significant impact on the application performance, resulting in average speedups of as much as two to four times.

  17. Northeast Clean Energy Application Center

    SciTech Connect (OSTI)

    Bourgeois, Tom

    2013-09-30

    From October 1, 2009 through September 30, 2013 (“contract period”), the Northeast Clean Energy Application Center (“NE-CEAC”) worked in New York and New England (Connecticut, Rhode Island, Vermont, Massachusetts, New Hampshire, and Maine) to create a more robust market for the deployment of clean energy technologies (CETs) including combined heat and power (CHP), district energy systems (DES), and waste heat recovery (WHR) systems through the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers. CHP, DES, and WHR can help reduce greenhouse gas emissions, reduce electrical and thermal energy costs, and provide more reliable energy for users throughout the United States. The NE-CEAC’s efforts in the provision of technical assistance, education and outreach, and strategic market analysis and support for decision-makers helped advance the market for CETs in the Northeast thereby helping the region move towards the following outcomes: • Reduction of greenhouse gas emissions and criteria pollutants • Improvements in energy efficiency resulting in lower costs of doing business • Productivity gains in industry and efficiency gains in buildings • Lower regional energy costs • Strengthened energy security • Enhanced consumer choice • Reduced price risks for end-users • Economic development effects keeping more jobs and more income in our regional economy Over the contract period, NE-CEAC provided technical assistance to approximately 56 different potential end-users that were interested in CHP and other CETs for their facility or facilities. Of these 56 potential end-users, five new CHP projects totaling over 60 MW of install capacity became operational during the contract period. The NE-CEAC helped host numerous target market workshops, trainings, and webinars; and NE-CEAC staff delivered presentations at many other workshops and conferences. In total, over 60 different workshops

  18. Proposal for grid computing for nuclear applications

    SciTech Connect (OSTI)

    Idris, Faridah Mohamad; Ismail, Saaidi; Haris, Mohd Fauzi B.; Sulaiman, Mohamad Safuan B.; Aslan, Mohd Dzul Aiman Bin.; Samsudin, Nursuliza Bt.; Ibrahim, Maizura Bt.; Ahmad, Megat Harun Al Rashid B. Megat; Yazid, Hafizal B.; Jamro, Rafhayudi B.; Azman, Azraf B.; Rahman, Anwar B. Abdul; Ibrahim, Mohd Rizal B. Mamat; Muhamad, Shalina Bt. Sheik; Hassan, Hasni; Abdullah, Wan Ahmad Tajuddin Wan; Ibrahim, Zainol Abidin; Zolkapli, Zukhaimira; Anuar, Afiq Aizuddin; Norjoharuddeen, Nurfikri; and others

    2014-02-12

    The use of computer clusters for computational sciences including computational physics is vital as it provides computing power to crunch big numbers at a faster rate. In compute intensive applications that requires high resolution such as Monte Carlo simulation, the use of computer clusters in a grid form that supplies computational power to any nodes within the grid that needs computing power, has now become a necessity. In this paper, we described how the clusters running on a specific application could use resources within the grid, to run the applications to speed up the computing process.

  19. EERE Postdoctoral Research Awards Application Form | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Application Form EERE Postdoctoral Research Awards Application Form Online Application available at: www.zintellect.com/Posting/Details/853 More Documents & Publications EERE Postdoctoral Research Award Application Components EERE Postdoctoral Research Awards Application Checklist EERE Postdoctoral Research Awards Letter of Support from Research Mentor

  20. Electric Transportation Applications All Rights Reserved ETA...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Effective March 1, 1997 Braking Test Prepared by Electric Transportation Applications ... Activity Requirements 6 5.3 Dry Controlled Test 7 5.4 Wet Controlled Test 9 5.5 Wet Panic ...

  1. NMED - Discharge Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Discharge Permit ApplicationLegal Published NA Year Signed or Took Effect 2014 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  2. Washington Joint Aquatic Resources Permit Application | Open...

    Open Energy Information (Open El) [EERE & EIA]

    Resources Permit ApplicationLegal Published NA Year Signed or Took Effect 2012 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  3. ENG Form 4345 Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ENG Form 4345 ApplicationLegal Published NA Year Signed or Took Effect 2013 Legal Citation Not provided DOI Not Provided Check for DOI availability: http:crossref.org Online...

  4. Section 31: Application of Release Limits

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    CRA Compliance Recertification Application DOE U.S. Department of Energy EPA U.S. ... The radioactive waste disposal regulations at 40 CFR Part 191 (U.S. EPA 1993) include ...

  5. Regulatory applications of sediment criteria. Final report

    SciTech Connect (OSTI)

    Not Available

    1987-06-23

    The report briefly describes the development of sediment criteria, discusses their utility and appropriate regulatory applications, and recommends steps to enhance the acceptance of sediment criteria by the regulatory and regulated communities.

  6. Self-contained exothermic applicator and process

    DOE Patents [OSTI]

    Koehmstedt, Paul L.

    1984-01-01

    An adhesive resin application system which requires no external heating apparatus, and which is operative in the absence of a reactive atmosphere, is disclosed. The system provides its own heat by employing an adhesive material containing reactants which react exothermally when electrically ignited. After ignition of the reactants, sufficient heat energy is liberated by the exothermic reaction either to plasticize a thermoplastic resin or to cure a thermosetting resin and therby bond together two closely spaced objects. This application is a continuation-in-part of application Ser. No. 489,006, filed Apr. 27, 1983, which is a continuation-in-part of application, Ser. No. 929,120, filed July 28, 1978, both now abandoned.

  7. Users Manual for the FEHMN application

    SciTech Connect (OSTI)

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1996-09-01

    The user`s manual documents the use of the Yucca Mountain Site Characterization Projects Finite element heat and mass transfer code (FEHMN) application. The manual covers: Program considerations, data files, input data, output, system interface, and examples.

  8. Comparing Application Methods for Antibacterial Hand Lotion ...

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Comparing Application Methods for Antibacterial Hand Lotion Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in ...

  9. Energy Department Accepting Small Business Grant Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    A mandatory letter of intent is due no later than December 15, 2014 at 5:00 p.m. Eastern Standard Time. The submission deadline for full applications is February 3, 2015. Read the ...

  10. DOE - Fossil Energy: 2011 Long Term Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Impt Expt Country Application Link Company Dkt. Index Ord. No. 11-09-LNG 012511 I Egypt BG LNG Services, LLC Dkt. Index 2917 11-51-LNG 042111 E Re-export Freeport LNG...

  11. BENEFIT 2016 Funding Opportunity - Full Applications Webinar...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    ... Any organization that would like to be included on this list should submit the information shown on this slide to the email ... Justification: Budget documents that ask applicants to ...

  12. Creating PDFs with Microsoft Office Applications

    Energy.gov [DOE]

    Once you have configured your Adobe Acrobat settings to the Office of Energy Efficiency and Renewable Energy (EERE) standards, follow the guidelines below to create your PDFs using Microsoft Office applications.

  13. Tips for Preparing a Resume Based Application

    Energy.gov [DOE]

    The Department of Energy is participating in the Resume Based Application for selected Senior Executive Service (SES) positions. This will be the only avenue for applying to these positions....

  14. Cloud Based Applications and Platforms (Presentation)

    SciTech Connect (OSTI)

    Brodt-Giles, D.

    2014-05-15

    Presentation to the Cloud Computing East 2014 Conference, where we are highlighting our cloud computing strategy, describing the platforms on the cloud (including Smartgrid.gov), and defining our process for implementing cloud based applications.

  15. Regulatory Review of Early Site Permit Applications

    SciTech Connect (OSTI)

    Scott, Michael L.

    2004-07-01

    The U.S. Nuclear Regulatory Commission (NRC) has received and is reviewing three applications for early site permits (ESPs). The ESP process allows early resolution of site-related issues affecting possible construction and operation of a new nuclear power plant. The nuclear industry views a successful and predictable ESP process as an important step in assessing whether to seek authorization to construct and operate a new generation of nuclear power reactors in the United States. Because consideration of ESP applications is a first-of-a-kind activity, a number of issues have emerged prior to and during the reviews of the first three applications. Issues have included the need for design information at the ESP stage, accident analyses, quality assurance, and seismic analyses. The NRC has been working to resolve identified issues to support a Commission decision on whether to issue an ESP approximately 33-37 months after receipt of each ESP application. (authors)

  16. Hydro Research Program Seeking Graduate Student Applicants

    Energy.gov [DOE]

    The Hydro Research Foundation is now accepting graduate student applications for its DOE-funded graduate student research program. The Hydro Research Awards Program is designed to spur innovation...

  17. Visualization Contest Applications due August 3

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Contest Applications due August 3 June 22, 2012 by Francesca Verdier In support of the IEEE Symposium on Large-Scale Data Analysis and Visualization (LDAV) 2012's visualization...

  18. New applications for high average power beams

    SciTech Connect (OSTI)

    Neau, E.L.; Turman, B.N.; Patterson, E.L.

    1993-08-01

    The technology base formed by the development of high peak power simulators, laser drivers, FEL`s, and ICF drivers from the early 60`s through the late 80`s is being extended to high average power short-pulse machines with the capabilities of supporting new types of manufacturing processes and performing new roles in environmental cleanup applications. This paper discusses a process for identifying and developing possible commercial applications, specifically those requiring very high average power levels of hundreds of kilowatts to perhaps megawatts. The authors discuss specific technology requirements and give examples of application development efforts. The application development work is directed at areas that can possibly benefit from the high specific energies attainable with short pulse machines.

  19. MCNP application for the 21 century

    SciTech Connect (OSTI)

    McKinney, M.C.

    2000-08-01

    The Los Alamos National Laboratory (LANL) Monte Carlo N-Particle radiation transport code, MCNP, has become an international standard for a wide spectrum of neutron, photon, and electron radiation transport applications. The latest version of the code, MCNP 4C, was released to the Radiation Safety Information Computational Center (RSICC) in February 2000. This paper describes the code development philosophy, new features and capabilities, applicability to various problems, and future directions.

  20. MCNP APPLICATIONS FOR THE 21ST CENTURY

    SciTech Connect (OSTI)

    G. MCKINNEY; T. BOOTH; ET AL

    2000-10-01

    The Los Alamos National Laboratory (LANL) Monte Carlo N-Particle radiation transport code, MCNP, has become an international standard for a wide spectrum of neutron, photon, and electron radiation transport applications. The latest version of the code, MCNP 4C, was released to the Radiation Safety Information Computational Center (RSICC) in February 2000. This paper describes the code development philosophy, new features and capabilities, applicability to various problems, and future directions.

  1. Applications of the Monte Carlo Method

    SciTech Connect (OSTI)

    1995-12-31

    This report discusses the applications of the Monte Carlo method. The specific topic covered are: radiative heat transfer in absorbing-emitting gas: program RADIAN; radiative heat transfer between surfaces separated by nonparticipating gas: program RADIANW; radiative heat transfer in absorbing-emitting and scattering media; and some industrial applications like boiler furnaces; gas reformer; combustion chambers of jet engines; nongray gas (combustion gas) layer; and circulating fluidized bed boiler furnace.

  2. Application experiences with the Globus toolkit.

    SciTech Connect (OSTI)

    Brunett, S.

    1998-06-09

    The Globus grid toolkit is a collection of software components designed to support the development of applications for high-performance distributed computing environments, or ''computational grids'' [14]. The Globus toolkit is an implementation of a ''bag of services'' architecture, which provides application and tool developers not with a monolithic system but rather with a set of stand-alone services. Each Globus component provides a basic service, such as authentication, resource allocation, information, communication, fault detection, and remote data access. Different applications and tools can combine these services in different ways to construct ''grid-enabled'' systems. The Globus toolkit has been used to construct the Globus Ubiquitous Supercomputing Testbed, or GUSTO: a large-scale testbed spanning 20 sites and included over 4000 compute nodes for a total compute power of over 2 TFLOPS. Over the past six months, we and others have used this testbed to conduct a variety of application experiments, including multi-user collaborative environments (tele-immersion), computational steering, distributed supercomputing, and high throughput computing. The goal of this paper is to review what has been learned from these experiments regarding the effectiveness of the toolkit approach. To this end, we describe two of the application experiments in detail, noting what worked well and what worked less well. The two applications are a distributed supercomputing application, SF-Express, in which multiple supercomputers are harnessed to perform large distributed interactive simulations; and a tele-immersion application, CAVERNsoft, in which the focus is on connecting multiple people to a distributed simulated world.

  3. A Lightweight Material for Heat Exchange Applications

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Continuous Processing of High Thermal Conductivity Polyethylene Fibers and Sheets A Lightweight Material for Heat Exchange Applications Introduction Thermal conductivity is an important consideration in choosing materials for different manufacturing applications. For example, materials used in heat exchang- ers require high thermal conductivity because heat must be transferred between substances located at a distance from one another. Historically, heat exchang- ers have been manufactured from

  4. Quantum and Dirac Materials for Energy Applications

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Quantum and Dirac Materials Conference Quantum and Dirac Materials for Energy (QDM) Applications The purpose of the workshop is to discuss current status and future prospects for the quantum materials and Dirac materials for energy and information technology applications using recent advances in synthesis, characterization and modeling. Contact Institute Director Dr. Alexander V. Balatsky Institute for Materials Science (505) 665-0077 Email Deputy Director Dr. Jennifer S. Martinez Institute for

  5. Application accelerator system having bunch control

    DOE Patents [OSTI]

    Wang, D.; Krafft, G.A.

    1999-06-22

    An application accelerator system for monitoring the gain of a free electron laser is disclosed. Coherent Synchrotron Radiation (CSR) detection techniques are used with a bunch length monitor for ultra short, picosec to several tens of femtosec, electron bunches. The monitor employs an application accelerator, a coherent radiation production device, an optical or beam chopping device, an infrared radiation collection device, a narrow-banding filter, an infrared detection device, and a control. 1 fig.

  6. Application accelerator system having bunch control

    DOE Patents [OSTI]

    Wang, Dunxiong; Krafft, Geoffrey Arthur

    1999-01-01

    An application accelerator system for monitoring the gain of a free electron laser. Coherent Synchrotron Radiation (CSR) detection techniques are used with a bunch length monitor for ultra short, picosec to several tens of femtosec, electron bunches. The monitor employs an application accelerator, a coherent radiation production device, an optical or beam chopping device, an infrared radiation collection device, a narrow-banding filter, an infrared detection device, and a control.

  7. Electronic Records Management Software Applications Design Criteria

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Standard | Department of Energy Electronic Records Management Software Applications Design Criteria Standard Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued under the authority of DoD Directive 5015.2, "Department of DefenseRecords Management Program," March 6, 2000, (Reference (a)) which provides implementing and procedural guidance on the management of records in the Department of Defense. Electronic Records Management

  8. Visualization Contest Applications due August 3

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Visualization Contest Applications due August 3 Visualization Contest Applications due August 3 June 22, 2012 by Francesca Verdier In support of the IEEE Symposium on Large-Scale Data Analysis and Visualization (LDAV) 2012's visualization contest, LDAV organizers are offering compute time to participants through a NERSC allocation awarded by ASCR. The LDAV Visualization Contest focuses on the area of visualization of extremely large datasets. The goal is to devise a visualization or a

  9. Structured Adaptive Mesh Refinement Application Infrastructure

    Energy Science and Technology Software Center (OSTI)

    2010-07-15

    SAMRAI is an object-oriented support library for structured adaptice mesh refinement (SAMR) simulation of computational science problems, modeled by systems of partial differential equations (PDEs). SAMRAI is developed and maintained in the Center for Applied Scientific Computing (CASC) under ASCI ITS and PSE support. SAMRAI is used in a variety of application research efforts at LLNL and in academia. These applications are developed in collaboration with SAMRAI development team members.

  10. Exhaust Gas Energy Recovery Technology Applications

    SciTech Connect (OSTI)

    Wagner, Robert M; Szybist, James P

    2014-01-01

    Exhaust waste heat recovery systems have the potential to significantly improve vehicle fuel economy for conventional and hybrid electric powertrains spanning passenger to heavy truck applications. This chapter discusses thermodynamic considerations and three classes of energy recovery technologies which are under development for vehicle applications. More specifically, this chapter describes the state-of-the-art in exhaust WHR as well as challenges and opportunities for thermodynamic power cycles, thermoelectric devices, and turbo-compounding systems.

  11. Applications for ACTS Workshop Due June 24

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    for ACTS Workshop Due June 24 Applications for ACTS Workshop Due June 24 June 1, 2012 by Francesca Verdier The 13th Workshop on the DOE Advanced Computational Software (ACTS) Collection, Scalable and Robust Computational Libraries and Tools for High-End Computing, will be held in Berkeley, CA, on August 14-17, 2012.ide range of applications and fields in computational sciences. The four-day workshop will include tutorials on the tools currently available in the collection, discussion sessions to

  12. Biomedical Applications of Microfluidic Technology (Technical Report) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Technical Report: Biomedical Applications of Microfluidic Technology Citation Details In-Document Search Title: Biomedical Applications of Microfluidic Technology Authors: Gao, Jun [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2014-03-28 OSTI Identifier: 1126675 Report Number(s): LA-UR-14-22067 DOE Contract Number: AC52-06NA25396 Resource Type: Technical Report Research Org: Los Alamos National Laboratory (LANL) Sponsoring Org: LDRD Country

  13. Optically Recording Velocity Interferometer System (ORVIS): Applications

    Office of Scientific and Technical Information (OSTI)

    and Challenges. (Conference) | SciTech Connect Optically Recording Velocity Interferometer System (ORVIS): Applications and Challenges. Citation Details In-Document Search Title: Optically Recording Velocity Interferometer System (ORVIS): Applications and Challenges. Abstract not provided. Authors: Cooper, Marcia A. Publication Date: 2015-06-01 OSTI Identifier: 1257697 Report Number(s): SAND2015-4721C 590812 DOE Contract Number: AC04-94AL85000 Resource Type: Conference Resource Relation:

  14. Innovation in the Interconnection Application Process

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    Innovation in the Interconnection Application Process" Ken Parks, SDG&E and Bob Woerner, PG&E April 2, 2014 2 Purpose of Today's Meeting * Learn about recent innovations in the distributed PV interconnection process * Examine how certain challenges related to increased demand for distributed PV can be addressed through revised application processes and procedures * Hear specific examples from electric utilities in mature solar markets (SDG&E and PG&E) 3 Speakers Ken Parks

  15. Assessment of Replicable Innovative Industrial Cogeneration Applications,

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    June 2001 | Department of Energy Replicable Innovative Industrial Cogeneration Applications, June 2001 Assessment of Replicable Innovative Industrial Cogeneration Applications, June 2001 U.S. industrial facilities utilize a wide array of thermal process equipment, including hot water heaters, thermal liquid heaters, ovens, furnaces, kilns, dryers, chillers, and boilers. This report provides a market assessment of innovative industrial distributed generation cogeneration systems that are less

  16. High Explosives Application Facility | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) High Explosives Application Facility A Livermore scientist uses a laser spectroscopic method with a diamond anvil DOE/NNSA has identified LLNL's High Explosives Applications Facility (HEAF) as the complex-wide "Center of Excellence" for High-Explosives Research and Development. In this capacity, HEAF is a source of subject matter expertise for high explosives and other energetic materials. Its mission is to provide this expertise to serve multiple government

  17. WPN 14-1 Application Instructions

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    U.S. Department of Energy Weatherization Assistance Program for Low-Income Persons APPLICATION INSTRUCTIONS U.S. Department of Energy Office of Weatherization and Intergovernmental Program 1000 Independence Avenue, SW, EE-2K Washington, DC 20585 February 2014 Table of Contents Reference Page List of Acronyms I. OVERVIEW I.1 Introduction II. APPLICATION FOR FEDERAL ASSISTANCE - STANDARD FORM 424 III. BUDGET III.1 SF 424A Budget Preparation III.2 Budget Categories - Section B III.3 Budget

  18. HTGR Application Economic Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  19. Property:NEPA ApplicationDate | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    ApplicationDate Jump to: navigation, search Property Name NEPA ApplicationDate Property Type Date This is a property of type Date. Pages using the property "NEPA ApplicationDate"...

  20. Sample of E-file Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Sample of E-file Application Sample of E-file Application PDF icon Sample of E-file Application More Documents & Publications pocforms06a0399.doc&0; SEMI-ANNUAL REPORTS FOR GOLDEN ...

  1. REMSView Validation Application - Version 3.1 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    3.1 Validation Application has been updated as of 392010. The application is a Java application and can be run on any computer system that can run Java. The interface is a...

  2. SC11 Education Program Applications due July 31

    U.S. Department of Energy (DOE) all webpages (Extended Search)

    SC11 Education Program Applications due July 31 SC11 Education Program Applications due July 31 June 9, 2011 by Francesca Verdier Applications for the Education Program are now ...

  3. Alaska Fish Habitat Permit Application | Open Energy Information

    Open Energy Information (Open El) [EERE & EIA]

    Alaska Fish Habitat Permit Application Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Alaska Fish Habitat Permit Application Form Type ApplicationNotice...

  4. Co-firing High Sulfur Coal with Refuse Derived Fuels. Technical Progress Report {number_sign}11

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, John T.; Lloyd, William G.

    1997-05-31

    The objective of this quarter of study was to prepare fuel pellets containing PVC, newspaper and plastics to be co-fired with coal in the AFBC combustor. The Western Kentucky University atmospheric fluidized bed combustion system requires the fuel to fall from a bunker into a lock-hopper, and from there into a mixing box where the fuel is auger-fed under pressure into the bottom of the fluidized bed. The fuel must flow freely out of the bunker and through the lock- hopper for proper feeding into the combustor. In order for the fuel to continuously fall through these units and into the mixing box during combustion, the density of the fuel and the size of the particles must meet certain requirements. The particles must be no larger than 3/8 inches in diameter and must have a density approaching that of coal. Loose materials such as sawdust, shredded paper products and most shredded plastics do not feed properly in the WKU AFBC system. Bridging and blockage of feed chutes result, even with constant vibration of parts of the feed mechanism. It is not possible to run the AFBC system powered solely by these loose materials.

  5. Design and performance requirements for a fluidized bed boiler firing municipal refuse derived fuel in Ravenna, Italy

    SciTech Connect (OSTI)

    Murphy, M.L.

    1999-07-01

    In early 1998, the City of Ravenna, Italy, commissioned a fluid bed boiler/waste-to-energy system to combust approximately 50,000 tonnes per year of processed municipal waste and generate electrical power. Much of the fuel preparation and processing equipment was already in place and the primary focus of this project was to implement an environmentally acceptable energy conversion process compatible with the 6.0 tonnes/hr of fuel being processed. The fluid bed boiler system being provided will incorporate state of the art environmental controls for abatement of all pollutants, including products of incomplete combustion (PICs), NO{sub x}, acid gases, and particulates. The project will deliver an average of 70,000 pounds per hour of steam to generate approximately 7 MW of electricity. The following is a description of the process and equipment being utilized for the energy conversion and boiler island, including the environmental abatement equipment. Design specifications for the plant including fuel and emission limits are presented herein. The facility is scheduled for startup in mid-1999.

  6. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 10, January 1997--March 1997

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1997-02-28

    In previous progress reports, we reported our study on the proposed mechanism for the formation of chlorinated organics during combustion, in which molecular chlorine is thought to be the key starting material. The objective of this quarter of study was to quantitatively test the inhibiting effect of SO{sub 2} on the formation of Cl{sub 2} during the combustion of MSW. The experiments were conducted under conditions close to those employed in the AFBC system. The principle analytical technique used for identification of the products from these experiments was GC/MS system. The results indicate that the production of Cl{sub 2} decreases when the concentration of SO{sub 2} in the gaseous mixture increases.

  7. Co-firing high sulfur coal with refuse derived fuels. Progress report No. 3, [April--June 1995

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1995-05-31

    The Thermogravimetric Analyzer-Fourier Transform Infrared Spectrometer-Mass Spectrometer (TG-FTIR-MS) system was used to identify molecular chlorine, along with HCl, CO, CO{sub 2}, H{sub 2}O, and various hydrocarbons in the gaseous products of the combustion of PVC resin in air. This is a significant finding that will lead us to examine this combustion step further to look for the formation of chlorinated organic compounds. The combination of TG-FTIR and TG-MS offers complementary techniques for the detection and identification of combustion products from coals PVC, cellulose, shredded newspaper, and various blends of these materials. The pilot atmospheric fluidized bed combustor (AFBC) at Western Kentucky University has been tested. The main purpose of these preliminary AFBC runs were to determine the compatibility of coal and pelletized wood in blends and to explore the effects of flue/air ratio. Our objective is to conduct AFBC burns with 90 percent sulfur capture and more then 96% combustion efficiency.

  8. Co-firing high sulfur coal with refuse derived fuels. Technical progress report No. 1, [September--November 1994

    SciTech Connect (OSTI)

    Pan, Wei-Ping; Riley, J.T.; Lloyd, W.G.

    1994-11-30

    This project is being coordinated with an ongoing project at Western Kentucky University that is being supported by the Southeastern Regional Biomass Energy Program through the Tennessee Valley Authority. Fluidized bed combustion tests will be performed on municipal solid waste blended with high-sulfur and high-chlorine coals in a laboratory scale combustor. The purpose of the tests is to evaluate combustion performance, the extent of the inorganic acid gases (HCl and SO{sub x}) and chlorinated organic compound formation, the effect of chlorine species on SO{sub 2} removal with a sorbent, and the effect of sulfur species on the formation of chlorinated organic compounds from MSW for a range of bed temperatures, excess air levels, MSW/coal ratios, and S/Cl ratios. Flue gas samples will be collected and analyzed at three locations: free board, cyclone inlet, and cyclone outlet. Analytical methods used will include ion chromatography, gas chromatography, and mass spectrometry. Waste stream ash samples will be collected from the cyclone catch and analyzed for unburned carbon, chlorine, chlorinated benzenes, polychlorinated biphenyls, chlorinated phenols, dioxins, furans, and metal content. Major, minor, and trace elements in the ash will be determined by x-ray fluorescence and inductively coupled plasma-atomic emission spectroscopy. Accomplishments for the first quarter are presented.

  9. Multi-Purpose, Application-Centric, Scalable I/O Proxy Application

    Energy Science and Technology Software Center (OSTI)

    2015-06-15

    MACSio is a Multi-purpose, Application-Centric, Scalable I/O proxy application. It is designed to support a number of goals with respect to parallel I/O performance testing and benchmarking including the ability to test and compare various I/O libraries and I/O paradigms, to predict scalable performance of real applications and to help identify where improvements in I/O performance can be made within the HPC I/O software stack.

  10. Pervasive Restart In MOOSE-based Applications

    SciTech Connect (OSTI)

    Derek Gaston; Cody Permann; David Andrs; John Peterson; Andrew Slaughter; Jason Miller

    2014-01-01

    Multiphysics applications are inherently complicated. Solving for multiple, interacting physical phenomena involves the solution of multiple equations, and each equation has its own data dependencies. Feeding the correct data to these equations at exactly the right time requires extensive effort in software design. In an ideal world, multiphysics applications always run to completion and produce correct answers. Unfortunately, in reality, there can be many reasons why a simulation might fail: power outage, system failure, exceeding a runtime allotment on a supercomputer, failure of the solver to converge, etc. A failure after many hours spent computing can be a significant setback for a project. Therefore, the ability to “continue” a solve from the point of failure, rather than starting again from scratch, is an essential component of any high-quality simulation tool. This process of “continuation” is commonly termed “restart” in the computational community. While the concept of restarting an application sounds ideal, the aforementioned complexities and data dependencies present in multiphysics applications make its implementation decidedly non-trivial. A running multiphysics calculation accumulates an enormous amount of “state”: current time, solution history, material properties, status of mechanical contact, etc. This “state” data comes in many different forms, including scalar, tensor, vector, and arbitrary, application-specific data types. To be able to restart an application, you must be able to both store and retrieve this data, effectively recreating the state of the application before the failure. When utilizing the Multiphysics Object Oriented Simulation Environment (MOOSE) framework developed at Idaho National Laboratory, this state data is stored both internally within the framework itself (such as solution vectors and the current time) and within the applications that use the framework. In order to implement restart in MOOSE

  11. Oregon Removal-Fill Permit Application Webpage | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Application Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Removal-Fill Permit Application Webpage Abstract Provides information for...

  12. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Stephen Buzzell and Lelah Sullivan Application for Presidential Permit OE Docket No. PP-371 ...

  13. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Stephen Buzzell and Lelah Sullivan Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Stephen Buzzell and Lelah Sullivan Application from ...

  14. DOE - Office of Legacy Management -- Radiation Applications Inc...

    Office of Legacy Management (LM)

    Radiation Applications Inc - NY 57 FUSRAP Considered Sites Site: RADIATION APPLICATIONS, INC. ( NY.57 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated ...

  15. Nevada Renewable Energy Application For Net Metering Customers...

    Open Energy Information (Open El) [EERE & EIA]

    Renewable Energy Application For Net Metering Customers Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: Nevada Renewable Energy Application For Net...

  16. Wireless Occupancy Sensors for Lighting Controls: An Applications...

    Office of Environmental Management (EM)

    Occupancy Sensors for Lighting Controls: An Applications Guide for Federal Facility Managers Wireless Occupancy Sensors for Lighting Controls: An Applications Guide for Federal ...

  17. Application for Presidential Permit OE Docket No. PP-412 ITC...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Project Application for Presidential Permit OE Docket No. PP-412 ITC Lake Erie Connector Project Application from ITC Lake Erie to construct, operate and maintain electric ...

  18. Using Mobile Applications to Generate Customer Demand | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Using Mobile Applications to Generate Customer Demand Using Mobile Applications to Generate Customer Demand Better Buildings Residential Network Peer Exchange Call Series: Using...

  19. High Temperature Gas Reactors: Assessment of Applicable Codes...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: High Temperature Gas Reactors: Assessment of Applicable Codes and ... applicable to HTGR plants, the operating history of past and present HTGR plants, and with ...

  20. Premium Efficiency Motor Selection and Application Guide - A...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Premium Efficiency Motor Selection and Application Guide - A Handbook for Industry Premium Efficiency Motor Selection and Application Guide - A Handbook for Industry This handbook ...

  1. Building the Next Generation of Parallel Applications: Co-Design...

    Office of Scientific and Technical Information (OSTI)

    Applications: Co-Design Opportunities and Challenges. Citation Details In-Document Search Title: Building the Next Generation of Parallel Applications: Co-Design Opportunities and ...

  2. Lignin Based Carbon Materials for Energy Storage Applications...

    Office of Scientific and Technical Information (OSTI)

    Book: Lignin Based Carbon Materials for Energy Storage Applications Citation Details In-Document Search Title: Lignin Based Carbon Materials for Energy Storage Applications The ...

  3. 2014 Housing Innovation Awards DOE Challenge Home Application...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Housing Innovation Awards DOE Challenge Home Application 2014 Housing Innovation Awards DOE Challenge Home Application The U.S. Department of Energy's Housing Innovation Awards ...

  4. Gas Cleaning for Remote Solid Oxide Fuel Cell (SOFC) Applications

    Energy.gov (indexed) [DOE]

    up for Fuel Cell Applications, Argonne National Lab Fuel (NG, LPG, LFG, ADG, APG, biodiesel) opportunities and impurity issues Gas Cleaning for Remote SOFC Applications Acumentrics ...

  5. DOE's Program Regulating Liquefied Natural Gas Export Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Program Regulating Liquefied Natural Gas Export Applications DOE's Program Regulating Liquefied Natural Gas Export Applications June 18, 2013 - 10:15am Addthis Statement of ...

  6. Appendix B: Rules and Directives Applicable to Nuclear Facilities...

    Energy Savers

    Appendix B: Rules and Directives Applicable to Nuclear Facilities Line Management Oversight Appendix B: Rules and Directives Applicable to Nuclear Facilities Line Management ...

  7. Working Toward Robust Process Monitoring for Safeguards Applications...

    Office of Scientific and Technical Information (OSTI)

    Working Toward Robust Process Monitoring for Safeguards Applications Citation Details In-Document Search Title: Working Toward Robust Process Monitoring for Safeguards Applications ...

  8. Fracture Network and Fluid Flow Imaging for EGS Applications...

    Energy.gov (indexed) [DOE]

    Network and Fluid Flow Imaging for EGS Applications from Multi-Dimensional Electrical ... EGS Applications from Multi-Dimensional Electrical Resistivity Structure FRAC-STIM: A ...

  9. Center for Fuel Cell Research and Applications | Open Energy...

    Open Energy Information (Open El) [EERE & EIA]

    Fuel Cell Research and Applications Jump to: navigation, search Name: Center for Fuel Cell Research and Applications Place: The Woodlands, Texas Zip: TX 77381 Product: A...

  10. Application for Presidential Permit OE Docket No. PP-398 Minnesota...

    Energy Savers

    Line Application for Presidential Permit OE Docket No. PP-398 Minnesota Power - Great Northern Transmission Line Application from Great Northern (GNTL) to construct, operate and ...

  11. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Energy Savers

    Vickie Bedard Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Vickie Bedard Application from Northern Pass to construct, operate and maintain ...

  12. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Erick Berglund, Jr. Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Erick Berglund, Jr. Application from Northern Pass to construct, operate ...

  13. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Energy Savers

    Hanglin Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Pamela Hanglin Application from Northern Pass to construct, operate and maintain ...

  14. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Lee Ann Moulder Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Lee Ann Moulder Application from Northern Pass Transmission to ...

  15. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Courtney Kearley Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Courtney Kearley Application from Northern Pass to construct, operate and ...

  16. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Maureen Quinn Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Maureen Quinn Application from Northern Pass to construct, operate and maintain ...

  17. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Roy Stever Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Roy Stever Application from Northern Pass Transmission to construct, ...

  18. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    John Doane Sr. Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from John Doane Sr. Application from Northern Pass to construct, operate and ...

  19. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Robert Cote Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Robert Cote Application from Northern Pass to construct, operate and maintain ...

  20. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Taras Kucman Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Taras Kucman Application from Northern Pass to construct, operate and maintain ...

  1. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Energy Savers

    The Weeks Lancaster Trust Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from The Weeks Lancaster Trust Application from Northern Pass to ...

  2. Application for Presidential Permit OE Docket No. PP-257 Emera...

    Office of Environmental Management (EM)

    57 Emera Energy Services, Inc. Application for Presidential Permit OE Docket No. PP-257 Emera Energy Services, Inc. Application from Emera Energy Services, Inc. to construct, ...

  3. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Energy Savers

    Susan Seitz Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Susan Seitz Application from Northern Pass to construct, operate and maintain ...

  4. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Nancy Rheinhardt Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Nancy Rheinhardt Application from Northern Pass Transmission to ...

  5. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Transmission LLC Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission LLC Amended application from Northern Pass to construct, operate and maintain ...

  6. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Mary Bearor Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Mary Bearor Application from Northern Pass Transmission to construct, ...

  7. Application for presidential permit OE Docket No. PP-305 Montana...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Update Application for presidential permit OE Docket No. PP-305 Montana Alberta Tie Ltd: Update Application from Montana Alberta Tie Ltd to construct, operate, and maintain ...

  8. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Linda Upham Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Linda Upham Application from Northern Pass Transmission to construct, ...

  9. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Michael Marino Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Michael Marino Application from Northern Pass Transmission to ...

  10. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    John Brodeer Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from John Brodeer Application from Northern Pass Transmission to ...

  11. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Jim Cannon Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Jim Cannon Application from Northern Pass to construct, operate and maintain ...

  12. Application for Presidential Permit OE Docket No. PP-334 Sempra...

    Energy Savers

    Presidential Permit OE Docket No. PP-334 Sempra Generation Application for Presidential Permit OE Docket No. PP-334 Sempra Generation Application from Sempra Generation to ...

  13. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    State Senator Jeanie Forrester Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from State Senator Jeanie Forrester Application from ...

  14. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Alice Peatman Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Alice Peatman Application from Northern Pass Transmission to ...

  15. Application for presidential permit OE Docket No. PP-362 Champlain...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    presidential permit OE Docket No. PP-362 Champlain Hudson Power Express Inc Application for presidential permit OE Docket No. PP-362 Champlain Hudson Power Express Inc Application ...

  16. Application for Presidential Permit OE Docket No. PP-044 Northern...

    Energy Savers

    44 Northern Electric Cooperative Association Application for Presidential Permit OE Docket No. PP-044 Northern Electric Cooperative Association Application from Northern Electric ...

  17. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Fred Brownson Application for Presidential Permit OE Docket No. PP-371 Northern Pass Transmission: Comments from Fred Brownson Application from Northern Pass Transmission to ...

  18. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Energy Savers

    Lindsey Coombs Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Lindsey Coombs Application from Northern Pass to construct, operate and ...

  19. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Environmental Management (EM)

    Hayes Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Pamela Hayes Application from Northern Pass to construct, operate and maintain electric ...

  20. Application for Presidential Permit OE Docket No. PP-371 Northern...

    Office of Energy Efficiency and Renewable Energy (EERE) (indexed site)

    Ann Vennerbeck Application for Presidential Permit OE Docket No. PP-371 Northern Pass: Comments from Ann Vennerbeck Application from Northern Pass to construct, operate and ...