March 2016 Most Viewed Documents for Engineering

  1. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    946

  2. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    855

  3. Conduction heat transfer solutions
    VanSant, J.H. (1980)

    846

  4. Automotive vehicle sensors
    Sheen, S.H.; Raptis, A.C.; Moscynski, M.J. (1995)

    726

  5. Pressure and flow characteristics of restrictive flow orifice devices.
    Shrouf, Roger D. (2003)

    397

  6. Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]
    Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992)

    382

  7. Optimization of Operating Parameters for Minimum Mechanical Specific Energy in Drilling
    Hamrick, Todd (2011)

    363

  8. Heat transfer model of above and underground insulated piping systems
    Kwon, K.C. (1998)

    301

  9. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    287

  10. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    252

  11. Laser beam shaping techniques
    DICKEY,FRED M.; WEICHMAN,LOUIS S.; SHAGAM,RICHARD N. (2000)

    197

  12. Grain refinement of permanent mold cast copper base alloys. Final report
    Sadayappan, M.; Thomson, J. P.; Elboujdaini, M.; Gu, G. Ping; Sahoo, M. (2004)

    193

  13. Failure Modes and Causes for Swing and Lift Type Check Valves.
    McElhaney, K.L. (1997)

    154

  14. An efficient method for calculating RMS von Mises stress in a random vibration environment
    Segalman, D.J.; Fulcher, C.W.G.; Reese, G.M.; Field, R.V. Jr. [Sandia National Labs., Albuquerque, NM (United States). Structural Dynamics and Vibration Control Dept.] (1998)

    152

  15. U235: a gamma ray analysis code for uranium isotopic determination
    Clark, D. (1997)

    138

  16. Radar cross section of triangular trihedral reflector with extended bottom plate.
    Brock, Billy C.; Doerry, Armin Walter (2009)

    127

  17. Calibration interval technical basis document
    Chiaro, P.J. Jr. (1998)

    122

  18. Nature and measurements of torque ripple of permanent-magnet adjustable-speed motors
    Hsu, J.S.; Scoggins, B.P.; Scudiere, M.B.; Marlino, L.D.; Adams, D.J.; Pillay, P. (1995)

    121

  19. The application of taylor weighting, digital phase shifters, and digital attenuators to phased-array antennas.
    Brock, Billy C. (2008)

    116

  20. SYNTHETIC SLING FAILURE - EVALUATIONS & RECOMMENDATIONS
    MACKEY TC; HENDERSON CS (2009)

    109