Observations and measurements of the reaction of the rock mass to mining have been made in the Naesliden Mine since the very start of mining operations in 1970. This observation program originated in the need of better understanding of the rock mechanics of cut-and-fill mining. The program comprises the following types of measurement - in the backfilled excavation convergence of the sidewalls pressure in the fill - in the orebody and alteration zones above the stopes horizontal deformation of the orebody and of the adjoining alteration zones horizontal stresses changes in horizontal stresses - in the stope amount and direction of roof and sidewall displacements convergence and sidewall deformation successively in roof and floor - in the sidewall surface subsidence horizontal displacements at 260 m level. Purpose, extent, methods and results of measurements are described. Qualitative observations concerning fracture processes due to mining are reported. The results are discussed and used for estimation of in situ modulus of elasticity of the orebody as well as the ratio of the modulus of elasticity of the orebody to the modulus of the alteration zone.