Abstract
Several silicones were tested with a view to their suitability for use as a cutter loader engine coolant. None were particularly toxic and FM-5.6AP had the best engineering properties; a full toxicological evaluation was therefore made of it. Threshold concentrations of FM-5.6AP were 450 and 24.1 mg/m/sup 3/ for the acute and chronic tests respectively. Increased temperature (120 C) did not affect the toxicity of the vapors significantly. No influence on the phagocytosis, deposition and elimination of coal dust in the lungs was found. Tests carried out underground in a Donbass mine revealed no harmful effects on miners. Laboratory and mine tests using an EhKVZh-315 cutter loader engine revealed that the quantity of FM-5.6AP vapor present in the air flow is less than the detectable minimum (0.01 mg/ml). It may therefore safely be used as a dielectric liquid in cutter loader engines.
Citation Formats
Donets, I K, Sukhanov, V V, Tsingarelli, E P, Dmitrenko, Yu I, and Kovalev, E B.
Silicon liquid for cooling coal cutter loader motors.
USSR: N. p.,
1983.
Web.
Donets, I K, Sukhanov, V V, Tsingarelli, E P, Dmitrenko, Yu I, & Kovalev, E B.
Silicon liquid for cooling coal cutter loader motors.
USSR.
Donets, I K, Sukhanov, V V, Tsingarelli, E P, Dmitrenko, Yu I, and Kovalev, E B.
1983.
"Silicon liquid for cooling coal cutter loader motors."
USSR.
@misc{etde_6910689,
title = {Silicon liquid for cooling coal cutter loader motors}
author = {Donets, I K, Sukhanov, V V, Tsingarelli, E P, Dmitrenko, Yu I, and Kovalev, E B}
abstractNote = {Several silicones were tested with a view to their suitability for use as a cutter loader engine coolant. None were particularly toxic and FM-5.6AP had the best engineering properties; a full toxicological evaluation was therefore made of it. Threshold concentrations of FM-5.6AP were 450 and 24.1 mg/m/sup 3/ for the acute and chronic tests respectively. Increased temperature (120 C) did not affect the toxicity of the vapors significantly. No influence on the phagocytosis, deposition and elimination of coal dust in the lungs was found. Tests carried out underground in a Donbass mine revealed no harmful effects on miners. Laboratory and mine tests using an EhKVZh-315 cutter loader engine revealed that the quantity of FM-5.6AP vapor present in the air flow is less than the detectable minimum (0.01 mg/ml). It may therefore safely be used as a dielectric liquid in cutter loader engines.}
journal = []
volume = {5}
journal type = {AC}
place = {USSR}
year = {1983}
month = {May}
}
title = {Silicon liquid for cooling coal cutter loader motors}
author = {Donets, I K, Sukhanov, V V, Tsingarelli, E P, Dmitrenko, Yu I, and Kovalev, E B}
abstractNote = {Several silicones were tested with a view to their suitability for use as a cutter loader engine coolant. None were particularly toxic and FM-5.6AP had the best engineering properties; a full toxicological evaluation was therefore made of it. Threshold concentrations of FM-5.6AP were 450 and 24.1 mg/m/sup 3/ for the acute and chronic tests respectively. Increased temperature (120 C) did not affect the toxicity of the vapors significantly. No influence on the phagocytosis, deposition and elimination of coal dust in the lungs was found. Tests carried out underground in a Donbass mine revealed no harmful effects on miners. Laboratory and mine tests using an EhKVZh-315 cutter loader engine revealed that the quantity of FM-5.6AP vapor present in the air flow is less than the detectable minimum (0.01 mg/ml). It may therefore safely be used as a dielectric liquid in cutter loader engines.}
journal = []
volume = {5}
journal type = {AC}
place = {USSR}
year = {1983}
month = {May}
}