The importance of improving overvoltage protection and reducing insulation level for voltages of 525 and 765 kV is fully realized. A digital computer may be used to determine, according to the Bergson procedure, the voltage distribution at different points of a given network but this procedure is very time-wasting. An analogue simulation is described, which, by giving an instantaneous display of the overvoltage wave on the screen of a cathode ray oscillograph, is better suited for the overvoltage protection study and satisfies also the conditions related to wave reproducibility. The method of simulating inductors, capacitors, and lightning arrestors (by using transistors) is shown and special emphasis is put on the surge generator analogue for which thyration tubes are used in order to get a linear front-increase of the impulse testing wave. The results obtained are accurate within 1 to 2% as compared with calculated values. Ten figures and seven references are given.