You need JavaScript to view this

Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan

Abstract

Based on the basic quality equation of photovoltaic (PV) cell, a quality equation of PV module has been constructed by considering the spectral distribution of solar radiation and its intensity. A calculation method has been also proposed for determining the output from current-voltage (I-V) curves. Effectiveness of this method was examined by comparing calculated results and observed results. Amorphous Si (a-Si) and polycrystal Si PV modules were examined. By considering the environmental factors, differences of the annual output between the calculated and observed values were reduced from 2.50% to 0.95% for the a-Si PV module, and from 2.52% to 1.24% for the polycrystal Si PV module, which resulted in the reduction more than 50%. For the a-Si PV module, the environmental factor most greatly affecting the annual output was the spectral distribution of solar radiation, which was 3.86 times as large as the cell temperature, and 1.04 times as large as the intensity of solar radiation. For the polycrystal PV module, the environmental factor most greatly affecting the annual output was the cell temperature, which was 7.05 times as large as the spectral distribution of solar radiation, and 1.74 times as large as the intensity of solar radiation. 6 refs.,  More>>
Authors:
Yamagami, Y; Tani, T [1] 
  1. Science University of Tokyo, Tokyo (Japan)
Publication Date:
Oct 27, 1996
Product Type:
Conference
Report Number:
CONF-9610295-
Reference Number:
SCA: 140600; PA: NEDO-96:915439; EDB-97:071965; SN: 97001782982
Resource Relation:
Conference: JSES/JWEA joint conference (1996), 1996 nendo nihon taiyo energy gakkai nihon furyoku energy kyokai godo kenkyu happyokai, Yamagata (Japan), 31 Oct - 1 Nov 1996; Other Information: PBD: 27 Oct 1996; Related Information: Is Part Of Proceedings of JSES/JWEA Joint Conference (1996); PB: 406 p.; Taiyo/furyoku energy koen ronbunshu (1996)
Subject:
14 SOLAR ENERGY; SOLAR CELL ARRAYS; POWER GENERATION; TEMPERATURE DEPENDENCE; INSOLATION; SPECTRA; ELECTRICAL PROPERTIES; ELECTRIC CURRENTS; ELECTRIC POTENTIAL; DIRECT SOLAR RADIATION; DISTRIBUTION; ENVIRONMENTAL EFFECTS; AMORPHOUS STATE; SILICON; SOLAR CELLS; POLYCRYSTALS
OSTI ID:
472732
Research Organizations:
Japan Solar Energy Society, Tokyo (Japan)
Country of Origin:
Japan
Language:
Japanese
Other Identifying Numbers:
Other: ON: DE97744185; TRN: 96:915439
Availability:
Available from Japan Solar Energy Society, 44-14, Yoyogi 2-chome, Shibuya-ku, Tokyo, Japan; OSTI as DE97744185
Submitting Site:
NEDO
Size:
pp. 45-48
Announcement Date:

Citation Formats

Yamagami, Y, and Tani, T. Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan. Japan: N. p., 1996. Web.
Yamagami, Y, & Tani, T. Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan. Japan.
Yamagami, Y, and Tani, T. 1996. "Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan." Japan.
@misc{etde_472732,
title = {Method for estimation of the output electric power of PV module with considering environmental factors. Method for estimation of output using I-V curves; Kankyo inshi wo koryoshita taiyo denchi module no shutsuryoku keisanho. I-V tokusei curve ni yoru keisan}
author = {Yamagami, Y, and Tani, T}
abstractNote = {Based on the basic quality equation of photovoltaic (PV) cell, a quality equation of PV module has been constructed by considering the spectral distribution of solar radiation and its intensity. A calculation method has been also proposed for determining the output from current-voltage (I-V) curves. Effectiveness of this method was examined by comparing calculated results and observed results. Amorphous Si (a-Si) and polycrystal Si PV modules were examined. By considering the environmental factors, differences of the annual output between the calculated and observed values were reduced from 2.50% to 0.95% for the a-Si PV module, and from 2.52% to 1.24% for the polycrystal Si PV module, which resulted in the reduction more than 50%. For the a-Si PV module, the environmental factor most greatly affecting the annual output was the spectral distribution of solar radiation, which was 3.86 times as large as the cell temperature, and 1.04 times as large as the intensity of solar radiation. For the polycrystal PV module, the environmental factor most greatly affecting the annual output was the cell temperature, which was 7.05 times as large as the spectral distribution of solar radiation, and 1.74 times as large as the intensity of solar radiation. 6 refs., 4 figs., 1 tab.}
place = {Japan}
year = {1996}
month = {Oct}
}