You need JavaScript to view this

Micro-friction behavior of amorphous carbon films on porous AAO membrane synthesized by the pyrolysis of polyethleneglycol 400

Abstract

The amorphous carbon films with different degrees of graphitization were synthesized by the pyrolysis of polyethleneglycol 400 infiltrated in the nano-sized pores of anodic aluminum oxide (AAO) membrane. The morphology and microstructure of the carbon films were characterized by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The micro-friction behavior of the amorphous carbon films sliding against GCr15 steel in ambient air was investigated using a ball-on-disk tester at an applied load of 980 mN and a sliding velocity of 0.2 m s{sup -1}. The graphitization degree in the carbon films had effect on the micro-friction properties. In comparison, the amorphous carbon film with high graphitization degree showed low friction coefficient and high wear resistance. An efficient approach was brought for enhancing the friction performance of aluminum.
Authors:
Tu, J P; [1]  Jiang, C X; [1]  Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)]; Guo, S Y; [2]  Fu, M F [3] 
  1. Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China)
  2. Department of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310033 (China)
  3. Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)
Publication Date:
May 25, 2005
Product Type:
Journal Article
Resource Relation:
Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing; Journal Volume: 398; Journal Issue: 1-2; Other Information: DOI: 10.1016/j.msea.2005.03.033; PII: S0921-5093(05)00247-9; Copyright (c) 2005 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA)
Subject:
36 MATERIALS SCIENCE; ALUMINIUM; ALUMINIUM OXIDES; CARBON; FILMS; FRICTION; FRICTION FACTOR; GRAPHITIZATION; MICROSTRUCTURE; MORPHOLOGY; NANOSTRUCTURES; PERFORMANCE; POROUS MATERIALS; PYROLYSIS; RAMAN SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; STEELS; SULFUR IONS; WEAR RESISTANCE; X-RAY DIFFRACTION
OSTI ID:
20915304
Country of Origin:
Netherlands
Language:
English
Other Identifying Numbers:
Journal ID: ISSN 0921-5093; MSAPE3; TRN: NL05U2153076012
Submitting Site:
NLN
Size:
page(s) 241-245
Announcement Date:
Sep 22, 2007

Citation Formats

Tu, J P, Jiang, C X, Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)], Guo, S Y, and Fu, M F. Micro-friction behavior of amorphous carbon films on porous AAO membrane synthesized by the pyrolysis of polyethleneglycol 400. Netherlands: N. p., 2005. Web. doi:10.1016/j.msea.2005.03.033.
Tu, J P, Jiang, C X, Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)], Guo, S Y, & Fu, M F. Micro-friction behavior of amorphous carbon films on porous AAO membrane synthesized by the pyrolysis of polyethleneglycol 400. Netherlands. doi:10.1016/j.msea.2005.03.033.
Tu, J P, Jiang, C X, Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)], Guo, S Y, and Fu, M F. 2005. "Micro-friction behavior of amorphous carbon films on porous AAO membrane synthesized by the pyrolysis of polyethleneglycol 400." Netherlands. doi:10.1016/j.msea.2005.03.033. https://www.osti.gov/servlets/purl/10.1016/j.msea.2005.03.033.
@misc{etde_20915304,
title = {Micro-friction behavior of amorphous carbon films on porous AAO membrane synthesized by the pyrolysis of polyethleneglycol 400}
author = {Tu, J P, Jiang, C X, Department of Mechanical and Electronic Engineering, Nanchang University, Nanchang 330029 (China)], Guo, S Y, and Fu, M F}
abstractNote = {The amorphous carbon films with different degrees of graphitization were synthesized by the pyrolysis of polyethleneglycol 400 infiltrated in the nano-sized pores of anodic aluminum oxide (AAO) membrane. The morphology and microstructure of the carbon films were characterized by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The micro-friction behavior of the amorphous carbon films sliding against GCr15 steel in ambient air was investigated using a ball-on-disk tester at an applied load of 980 mN and a sliding velocity of 0.2 m s{sup -1}. The graphitization degree in the carbon films had effect on the micro-friction properties. In comparison, the amorphous carbon film with high graphitization degree showed low friction coefficient and high wear resistance. An efficient approach was brought for enhancing the friction performance of aluminum.}
doi = {10.1016/j.msea.2005.03.033}
journal = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing}
issue = {1-2}
volume = {398}
place = {Netherlands}
year = {2005}
month = {May}
}