Abstract
This work aims at measuring the equation of state of porous plastic materials in the view of their use in inertial confinement fusion. We have experimentally determined the shock polar curve of TMPTA (C{sub 15}H{sub 20}O{sub 6}) by the use of the impedance matching technique. This technique is based on the simultaneous measurement of the shock velocities in the 2 materials composing the target. The shock polar curve has been drawn for pressures ranging from 10 kbar to 3 Mbar and densities from 20 mg/cm{sup 3} to 1.1 g/cm{sup 3}. The use of a slit sweep camera to assess the propagation of the shock wave through the target has limited the accuracy of the technique to 10%. Experimental results match well data provided by the Sesame tables that are broadly used by hydrodynamic codes. Nevertheless the statistical distribution of experimental points seems to show a lower compressibility of the foam that might be attributed to a slight pre-heating process or to the effect of the foam micro-structure on the shock wave propagation. In order to improve the accuracy of the method, an attempt was made to use an active doppler interferometric diagnostic to measure shock wave velocities. It has been
More>>
Citation Formats
Philippe, F.
Measurement of the equation of state of porous materials through the use of shock waves generated by laser radiation; Mesure de l'equation d'etat de materiaux poreux a l'aide d'ondes de choc generees par laser.
France: N. p.,
2001.
Web.
Philippe, F.
Measurement of the equation of state of porous materials through the use of shock waves generated by laser radiation; Mesure de l'equation d'etat de materiaux poreux a l'aide d'ondes de choc generees par laser.
France.
Philippe, F.
2001.
"Measurement of the equation of state of porous materials through the use of shock waves generated by laser radiation; Mesure de l'equation d'etat de materiaux poreux a l'aide d'ondes de choc generees par laser."
France.
@misc{etde_20754756,
title = {Measurement of the equation of state of porous materials through the use of shock waves generated by laser radiation; Mesure de l'equation d'etat de materiaux poreux a l'aide d'ondes de choc generees par laser}
author = {Philippe, F}
abstractNote = {This work aims at measuring the equation of state of porous plastic materials in the view of their use in inertial confinement fusion. We have experimentally determined the shock polar curve of TMPTA (C{sub 15}H{sub 20}O{sub 6}) by the use of the impedance matching technique. This technique is based on the simultaneous measurement of the shock velocities in the 2 materials composing the target. The shock polar curve has been drawn for pressures ranging from 10 kbar to 3 Mbar and densities from 20 mg/cm{sup 3} to 1.1 g/cm{sup 3}. The use of a slit sweep camera to assess the propagation of the shock wave through the target has limited the accuracy of the technique to 10%. Experimental results match well data provided by the Sesame tables that are broadly used by hydrodynamic codes. Nevertheless the statistical distribution of experimental points seems to show a lower compressibility of the foam that might be attributed to a slight pre-heating process or to the effect of the foam micro-structure on the shock wave propagation. In order to improve the accuracy of the method, an attempt was made to use an active doppler interferometric diagnostic to measure shock wave velocities. It has been showed that the shock wave front in the foam is reflecting enough to make this method relevant if we can overcome the difficulty of a high luminous background. Despite that, we have succeeded in measuring with high accuracy, a point of the shock polar curve for 800 mg/cm{sup 3} dense TMPTA. (A.C.)}
place = {France}
year = {2001}
month = {Dec}
}
title = {Measurement of the equation of state of porous materials through the use of shock waves generated by laser radiation; Mesure de l'equation d'etat de materiaux poreux a l'aide d'ondes de choc generees par laser}
author = {Philippe, F}
abstractNote = {This work aims at measuring the equation of state of porous plastic materials in the view of their use in inertial confinement fusion. We have experimentally determined the shock polar curve of TMPTA (C{sub 15}H{sub 20}O{sub 6}) by the use of the impedance matching technique. This technique is based on the simultaneous measurement of the shock velocities in the 2 materials composing the target. The shock polar curve has been drawn for pressures ranging from 10 kbar to 3 Mbar and densities from 20 mg/cm{sup 3} to 1.1 g/cm{sup 3}. The use of a slit sweep camera to assess the propagation of the shock wave through the target has limited the accuracy of the technique to 10%. Experimental results match well data provided by the Sesame tables that are broadly used by hydrodynamic codes. Nevertheless the statistical distribution of experimental points seems to show a lower compressibility of the foam that might be attributed to a slight pre-heating process or to the effect of the foam micro-structure on the shock wave propagation. In order to improve the accuracy of the method, an attempt was made to use an active doppler interferometric diagnostic to measure shock wave velocities. It has been showed that the shock wave front in the foam is reflecting enough to make this method relevant if we can overcome the difficulty of a high luminous background. Despite that, we have succeeded in measuring with high accuracy, a point of the shock polar curve for 800 mg/cm{sup 3} dense TMPTA. (A.C.)}
place = {France}
year = {2001}
month = {Dec}
}