Abstract
This project is aimed at development of automatic rotary table type digging apparatus capable of digging high-temperature beds of 3,000 to 5,000 m in depth, 400 degrees C and 500 kg/cm{sup 2}. The automatic excavation apparatus is designed based on the concept that the driller is separated from the running drawworks side for other works. However, it is operated manually in a traditional manner, when the bed for which it is to be used is under complex conditions, or when the bed properties require frequent changes in digging conditions with respect to bit load and speed of rotation. The apparatus works, when the bed is considered to be under essentially constant conditions at a fairly high depth, in such a way that a combination of bit load and speed of rotation is set by the driller, and the work line wound on the drawworks drum is let out to keep the bit load constant. It is equipped with, e.g., a controller, converter and brake operating device, detecting suspension load by the controller, when it increases, increasing speed of air motor after comparing the load with the reference level, and relaxing the brake, to keep the suspension load at the set
More>>
Citation Formats
None.
FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Conceptual designs of automatic digging systems); 1975 nendo koon chiso kussaku gijutsu no kaihatsu seika hokokusho. Jido kussaku system no gainen sekkei.
Japan: N. p.,
1976.
Web.
None.
FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Conceptual designs of automatic digging systems); 1975 nendo koon chiso kussaku gijutsu no kaihatsu seika hokokusho. Jido kussaku system no gainen sekkei.
Japan.
None.
1976.
"FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Conceptual designs of automatic digging systems); 1975 nendo koon chiso kussaku gijutsu no kaihatsu seika hokokusho. Jido kussaku system no gainen sekkei."
Japan.
@misc{etde_20102611,
title = {FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Conceptual designs of automatic digging systems); 1975 nendo koon chiso kussaku gijutsu no kaihatsu seika hokokusho. Jido kussaku system no gainen sekkei}
author = {None}
abstractNote = {This project is aimed at development of automatic rotary table type digging apparatus capable of digging high-temperature beds of 3,000 to 5,000 m in depth, 400 degrees C and 500 kg/cm{sup 2}. The automatic excavation apparatus is designed based on the concept that the driller is separated from the running drawworks side for other works. However, it is operated manually in a traditional manner, when the bed for which it is to be used is under complex conditions, or when the bed properties require frequent changes in digging conditions with respect to bit load and speed of rotation. The apparatus works, when the bed is considered to be under essentially constant conditions at a fairly high depth, in such a way that a combination of bit load and speed of rotation is set by the driller, and the work line wound on the drawworks drum is let out to keep the bit load constant. It is equipped with, e.g., a controller, converter and brake operating device, detecting suspension load by the controller, when it increases, increasing speed of air motor after comparing the load with the reference level, and relaxing the brake, to keep the suspension load at the set level. When the suspension load decreases, on the other hand, the air motor is decelerated to tighten the brake. (NEDO)}
place = {Japan}
year = {1976}
month = {Mar}
}
title = {FY 1975 Report on results of Sunshine Project. Development of techniques of digging high-temperature beds (Conceptual designs of automatic digging systems); 1975 nendo koon chiso kussaku gijutsu no kaihatsu seika hokokusho. Jido kussaku system no gainen sekkei}
author = {None}
abstractNote = {This project is aimed at development of automatic rotary table type digging apparatus capable of digging high-temperature beds of 3,000 to 5,000 m in depth, 400 degrees C and 500 kg/cm{sup 2}. The automatic excavation apparatus is designed based on the concept that the driller is separated from the running drawworks side for other works. However, it is operated manually in a traditional manner, when the bed for which it is to be used is under complex conditions, or when the bed properties require frequent changes in digging conditions with respect to bit load and speed of rotation. The apparatus works, when the bed is considered to be under essentially constant conditions at a fairly high depth, in such a way that a combination of bit load and speed of rotation is set by the driller, and the work line wound on the drawworks drum is let out to keep the bit load constant. It is equipped with, e.g., a controller, converter and brake operating device, detecting suspension load by the controller, when it increases, increasing speed of air motor after comparing the load with the reference level, and relaxing the brake, to keep the suspension load at the set level. When the suspension load decreases, on the other hand, the air motor is decelerated to tighten the brake. (NEDO)}
place = {Japan}
year = {1976}
month = {Mar}
}