Abstract
The tensile properties of corroded and irradiated specimens were calculated using the tensile properties of only corroded, only irradiated and not exposed specimens. The corrosion medium used was hyperstoichiometric uranium dioxide with simulated fission products (Cs, I, Te). The flat tensile specimens were made from the austenitic fuel rod cladding steel type 1.4970. The model for calculation supposes the following correlation of the tensile properties Z: Z (corroded + irradiated) = Z (corroded) . Z (irradiated)/Z (not exposed). The results of calculations and experiments agree well although the scattering of the experimental results caused by the corrosion is considerable. The following experimental parameters were investigated: test temperature, deformation rate, corrosion depth, simulated burnup and thermal-mechanical treatment of the material. (orig./HP) [Deutsch] Es wurden die Zugeigenschaften von korrodierten und bestrahlten Proben aus den Zugeigenschaften von Proben im korrodierten, im bestrahlten und im Ausgangszustand berechnet. Als Korrosionsmedium wurde in Analogie zu Brueterbrennstaeben eine Mischung aus ueberstoechiometrischem Urandioxid und simulierten Spaltprodukten (Cs, I, Te) verwendet. Die Flachproben bestanden aus dem austenitischen Huellrohrstahl 1.4970. Das Rechenmodell setzt folgende Beziehung der Zugeigenschaften Z voraus: Z (korrod. + bestrahlt) = Z (korrod.) . Z (bestrahlt): Z (Ausgangszustand). Die Ergebnisse der Berechnungen stimmen mit den Messergebnissen im
More>>
Citation Formats
Schaefer, L.
Tensile properties of an austenitic fuel road cladding steel after corrosion with uranium dioxide and simulated fission products and irradiation with neutrons; Zugeigenschaften eines austenitischen Huellrohrstahls nach Korrosion mit Urandioxid und simulierten Spaltprodukten sowie Neutronenbestrahlung.
Germany: N. p.,
1993.
Web.
Schaefer, L.
Tensile properties of an austenitic fuel road cladding steel after corrosion with uranium dioxide and simulated fission products and irradiation with neutrons; Zugeigenschaften eines austenitischen Huellrohrstahls nach Korrosion mit Urandioxid und simulierten Spaltprodukten sowie Neutronenbestrahlung.
Germany.
Schaefer, L.
1993.
"Tensile properties of an austenitic fuel road cladding steel after corrosion with uranium dioxide and simulated fission products and irradiation with neutrons; Zugeigenschaften eines austenitischen Huellrohrstahls nach Korrosion mit Urandioxid und simulierten Spaltprodukten sowie Neutronenbestrahlung."
Germany.
@misc{etde_10141618,
title = {Tensile properties of an austenitic fuel road cladding steel after corrosion with uranium dioxide and simulated fission products and irradiation with neutrons; Zugeigenschaften eines austenitischen Huellrohrstahls nach Korrosion mit Urandioxid und simulierten Spaltprodukten sowie Neutronenbestrahlung}
author = {Schaefer, L}
abstractNote = {The tensile properties of corroded and irradiated specimens were calculated using the tensile properties of only corroded, only irradiated and not exposed specimens. The corrosion medium used was hyperstoichiometric uranium dioxide with simulated fission products (Cs, I, Te). The flat tensile specimens were made from the austenitic fuel rod cladding steel type 1.4970. The model for calculation supposes the following correlation of the tensile properties Z: Z (corroded + irradiated) = Z (corroded) . Z (irradiated)/Z (not exposed). The results of calculations and experiments agree well although the scattering of the experimental results caused by the corrosion is considerable. The following experimental parameters were investigated: test temperature, deformation rate, corrosion depth, simulated burnup and thermal-mechanical treatment of the material. (orig./HP) [Deutsch] Es wurden die Zugeigenschaften von korrodierten und bestrahlten Proben aus den Zugeigenschaften von Proben im korrodierten, im bestrahlten und im Ausgangszustand berechnet. Als Korrosionsmedium wurde in Analogie zu Brueterbrennstaeben eine Mischung aus ueberstoechiometrischem Urandioxid und simulierten Spaltprodukten (Cs, I, Te) verwendet. Die Flachproben bestanden aus dem austenitischen Huellrohrstahl 1.4970. Das Rechenmodell setzt folgende Beziehung der Zugeigenschaften Z voraus: Z (korrod. + bestrahlt) = Z (korrod.) . Z (bestrahlt): Z (Ausgangszustand). Die Ergebnisse der Berechnungen stimmen mit den Messergebnissen im Mittel gut ueberein, obwohl die korrosionsbedingten Steuungen der Messwerte z.T. erheblich sind. Als Parameter wurden die Verformungsgeschwindigkeit, die Prueftemperatur, die Korrosionstiefe, der simulierte Abbrand und der Werkstoffzustand variiert. (orig./HP)}
place = {Germany}
year = {1993}
month = {Oct}
}
title = {Tensile properties of an austenitic fuel road cladding steel after corrosion with uranium dioxide and simulated fission products and irradiation with neutrons; Zugeigenschaften eines austenitischen Huellrohrstahls nach Korrosion mit Urandioxid und simulierten Spaltprodukten sowie Neutronenbestrahlung}
author = {Schaefer, L}
abstractNote = {The tensile properties of corroded and irradiated specimens were calculated using the tensile properties of only corroded, only irradiated and not exposed specimens. The corrosion medium used was hyperstoichiometric uranium dioxide with simulated fission products (Cs, I, Te). The flat tensile specimens were made from the austenitic fuel rod cladding steel type 1.4970. The model for calculation supposes the following correlation of the tensile properties Z: Z (corroded + irradiated) = Z (corroded) . Z (irradiated)/Z (not exposed). The results of calculations and experiments agree well although the scattering of the experimental results caused by the corrosion is considerable. The following experimental parameters were investigated: test temperature, deformation rate, corrosion depth, simulated burnup and thermal-mechanical treatment of the material. (orig./HP) [Deutsch] Es wurden die Zugeigenschaften von korrodierten und bestrahlten Proben aus den Zugeigenschaften von Proben im korrodierten, im bestrahlten und im Ausgangszustand berechnet. Als Korrosionsmedium wurde in Analogie zu Brueterbrennstaeben eine Mischung aus ueberstoechiometrischem Urandioxid und simulierten Spaltprodukten (Cs, I, Te) verwendet. Die Flachproben bestanden aus dem austenitischen Huellrohrstahl 1.4970. Das Rechenmodell setzt folgende Beziehung der Zugeigenschaften Z voraus: Z (korrod. + bestrahlt) = Z (korrod.) . Z (bestrahlt): Z (Ausgangszustand). Die Ergebnisse der Berechnungen stimmen mit den Messergebnissen im Mittel gut ueberein, obwohl die korrosionsbedingten Steuungen der Messwerte z.T. erheblich sind. Als Parameter wurden die Verformungsgeschwindigkeit, die Prueftemperatur, die Korrosionstiefe, der simulierte Abbrand und der Werkstoffzustand variiert. (orig./HP)}
place = {Germany}
year = {1993}
month = {Oct}
}