Abstract
Work was primarily devoted to the development of single models, considering the relevant physical processes during core heatup, in the early phase of core degradation and - in a later phase of the accident - debris bed behaviour. Instead of reconstructing the core behaviour by means of triggering events, selection of parameters and the use of empirical correlations KESS model development was oriented on the description of basic physical processes. They have been realized to a large extent as independent modules, connected by the informatic structure RSYST. Functional tests and model checks were based on stand-alone module versions. Model implementation into the code system was performed in different ways, e.g. complete integration, insertion of simplified model versions or loose coupling (use of selected interfaces only). A detailed modelling of the transition phenomena between different accident phases was not included in the contract, leading to the renunciation of the integration of specific models, e.g. debris bed models (problem: debris bed formation). (orig.) [Deutsch] Die Entwicklungsarbeiten dienten vorrangig der Einzelmodellbildung zur Erfassung der wesentlichen physkalischen Prozesse waehrend der Kernaufheizung, in der Phase beginnender Kernzerstoerung sowie - in einer spaeteren Unfallphase - des Partikelbettverhaltens. Die Modellbildung orientierte sich dabei an der Beschreibung physikalischer
More>>
Citation Formats
Hocke, K D, Buerger, M, and Schatz, A.
KESS-III - a code system for the modelling of design-exceeding accidents in LWRs. Final report; KESS-III - ein Progammsystem zur Simulation auslegungsueberschreitender Stoerfaelle in Leichtwasserreaktoren; Abschlussbericht.
Germany: N. p.,
1991.
Web.
Hocke, K D, Buerger, M, & Schatz, A.
KESS-III - a code system for the modelling of design-exceeding accidents in LWRs. Final report; KESS-III - ein Progammsystem zur Simulation auslegungsueberschreitender Stoerfaelle in Leichtwasserreaktoren; Abschlussbericht.
Germany.
Hocke, K D, Buerger, M, and Schatz, A.
1991.
"KESS-III - a code system for the modelling of design-exceeding accidents in LWRs. Final report; KESS-III - ein Progammsystem zur Simulation auslegungsueberschreitender Stoerfaelle in Leichtwasserreaktoren; Abschlussbericht."
Germany.
@misc{etde_10141603,
title = {KESS-III - a code system for the modelling of design-exceeding accidents in LWRs. Final report; KESS-III - ein Progammsystem zur Simulation auslegungsueberschreitender Stoerfaelle in Leichtwasserreaktoren; Abschlussbericht}
author = {Hocke, K D, Buerger, M, and Schatz, A}
abstractNote = {Work was primarily devoted to the development of single models, considering the relevant physical processes during core heatup, in the early phase of core degradation and - in a later phase of the accident - debris bed behaviour. Instead of reconstructing the core behaviour by means of triggering events, selection of parameters and the use of empirical correlations KESS model development was oriented on the description of basic physical processes. They have been realized to a large extent as independent modules, connected by the informatic structure RSYST. Functional tests and model checks were based on stand-alone module versions. Model implementation into the code system was performed in different ways, e.g. complete integration, insertion of simplified model versions or loose coupling (use of selected interfaces only). A detailed modelling of the transition phenomena between different accident phases was not included in the contract, leading to the renunciation of the integration of specific models, e.g. debris bed models (problem: debris bed formation). (orig.) [Deutsch] Die Entwicklungsarbeiten dienten vorrangig der Einzelmodellbildung zur Erfassung der wesentlichen physkalischen Prozesse waehrend der Kernaufheizung, in der Phase beginnender Kernzerstoerung sowie - in einer spaeteren Unfallphase - des Partikelbettverhaltens. Die Modellbildung orientierte sich dabei an der Beschreibung physikalischer Grundprozesse anstelle der Rekonstruktion des Kernverhaltens durch Triggerung von Ereignissen, Parameterwahl und Anwendung empirischer Korrelationen. Die Modelle wurden weitgehend als selbstaendige Programmeinheiten (Module) realisiert. Datenaustausch und Modulsteuerung im KESS-Gesamtcode erfolgt ueber das Datensystem RSYST. Funktionstests und erste Modellueberpruefungen wurden auf der Basis der Einzelmodule durchgefuehrt. Der Modelleinbau in den Gesamtcode erfolgte auf verschiedene Arten, z.B. durch vollstaendige Integration, Einbau vereinfachter Modellversionen, oder lose Ankopplung (Verwendung ausgewaehlter Schnittstellen). Da eine genaue Modellierung der Uebergaenge zwischen unterschiedlichen Stoerfallphasen nicht Bestandteil des Vorhabens war, musste auf den Einbau einzelner Modelle, wie z.B. der Partikelbettmodelle, verzichtet werden. (orig.)}
place = {Germany}
year = {1991}
month = {Jan}
}
title = {KESS-III - a code system for the modelling of design-exceeding accidents in LWRs. Final report; KESS-III - ein Progammsystem zur Simulation auslegungsueberschreitender Stoerfaelle in Leichtwasserreaktoren; Abschlussbericht}
author = {Hocke, K D, Buerger, M, and Schatz, A}
abstractNote = {Work was primarily devoted to the development of single models, considering the relevant physical processes during core heatup, in the early phase of core degradation and - in a later phase of the accident - debris bed behaviour. Instead of reconstructing the core behaviour by means of triggering events, selection of parameters and the use of empirical correlations KESS model development was oriented on the description of basic physical processes. They have been realized to a large extent as independent modules, connected by the informatic structure RSYST. Functional tests and model checks were based on stand-alone module versions. Model implementation into the code system was performed in different ways, e.g. complete integration, insertion of simplified model versions or loose coupling (use of selected interfaces only). A detailed modelling of the transition phenomena between different accident phases was not included in the contract, leading to the renunciation of the integration of specific models, e.g. debris bed models (problem: debris bed formation). (orig.) [Deutsch] Die Entwicklungsarbeiten dienten vorrangig der Einzelmodellbildung zur Erfassung der wesentlichen physkalischen Prozesse waehrend der Kernaufheizung, in der Phase beginnender Kernzerstoerung sowie - in einer spaeteren Unfallphase - des Partikelbettverhaltens. Die Modellbildung orientierte sich dabei an der Beschreibung physikalischer Grundprozesse anstelle der Rekonstruktion des Kernverhaltens durch Triggerung von Ereignissen, Parameterwahl und Anwendung empirischer Korrelationen. Die Modelle wurden weitgehend als selbstaendige Programmeinheiten (Module) realisiert. Datenaustausch und Modulsteuerung im KESS-Gesamtcode erfolgt ueber das Datensystem RSYST. Funktionstests und erste Modellueberpruefungen wurden auf der Basis der Einzelmodule durchgefuehrt. Der Modelleinbau in den Gesamtcode erfolgte auf verschiedene Arten, z.B. durch vollstaendige Integration, Einbau vereinfachter Modellversionen, oder lose Ankopplung (Verwendung ausgewaehlter Schnittstellen). Da eine genaue Modellierung der Uebergaenge zwischen unterschiedlichen Stoerfallphasen nicht Bestandteil des Vorhabens war, musste auf den Einbau einzelner Modelle, wie z.B. der Partikelbettmodelle, verzichtet werden. (orig.)}
place = {Germany}
year = {1991}
month = {Jan}
}