Abstract
Three point and four point bending tests were performed on barium titanate and the glass ceramic Macor at room temperature in a controlled nitrogen environment. The Weibull moduli and Weibull characteristic strength were determined from Weibull plots using a least squares analysis with a weighting factor. The Weibull moduli of the three point and four point bending tests are in good correspondence for the tested materials. On these materials and on Anderman and Ryder alumina chevron notched beam fracture toughness tests were performed under four point bending at room temperature in air. The results show that the reproducibility of this test method is very good. 4 figs., 2 tabs., 6 refs.
Citation Formats
De Smet, B J.
Bending strength and fracture toughness of barium titanate and Macor.
Netherlands: N. p.,
1993.
Web.
De Smet, B J.
Bending strength and fracture toughness of barium titanate and Macor.
Netherlands.
De Smet, B J.
1993.
"Bending strength and fracture toughness of barium titanate and Macor."
Netherlands.
@misc{etde_10127279,
title = {Bending strength and fracture toughness of barium titanate and Macor}
author = {De Smet, B J}
abstractNote = {Three point and four point bending tests were performed on barium titanate and the glass ceramic Macor at room temperature in a controlled nitrogen environment. The Weibull moduli and Weibull characteristic strength were determined from Weibull plots using a least squares analysis with a weighting factor. The Weibull moduli of the three point and four point bending tests are in good correspondence for the tested materials. On these materials and on Anderman and Ryder alumina chevron notched beam fracture toughness tests were performed under four point bending at room temperature in air. The results show that the reproducibility of this test method is very good. 4 figs., 2 tabs., 6 refs.}
place = {Netherlands}
year = {1993}
month = {Jan}
}
title = {Bending strength and fracture toughness of barium titanate and Macor}
author = {De Smet, B J}
abstractNote = {Three point and four point bending tests were performed on barium titanate and the glass ceramic Macor at room temperature in a controlled nitrogen environment. The Weibull moduli and Weibull characteristic strength were determined from Weibull plots using a least squares analysis with a weighting factor. The Weibull moduli of the three point and four point bending tests are in good correspondence for the tested materials. On these materials and on Anderman and Ryder alumina chevron notched beam fracture toughness tests were performed under four point bending at room temperature in air. The results show that the reproducibility of this test method is very good. 4 figs., 2 tabs., 6 refs.}
place = {Netherlands}
year = {1993}
month = {Jan}
}