Abstract
A straw tube drift chamber prototype has been constructed and tested. The straw tube material is mylar film covered with carbon layer of resistivity 0.5, 30 and 70 k Ohm/sq. The gas mixture used was Ar/CH{sub 4}. Both the anode wire and cathode signals were detected in order to study the behaviour of the chamber in the presence of X-ray ionization. The construction and the results of the study are presented. 7 refs., 11 figs., 1 tab.
Citation Formats
Bychkov, V N, Kekelidze, G D, Novikov, E A, Peshekhonov, V D, Shafranov, M D, and Zhil`tsov, V E.
Cathode Readout with Stripped Resistive Drift Tubes.
JINR: N. p.,
1994.
Web.
Bychkov, V N, Kekelidze, G D, Novikov, E A, Peshekhonov, V D, Shafranov, M D, & Zhil`tsov, V E.
Cathode Readout with Stripped Resistive Drift Tubes.
JINR.
Bychkov, V N, Kekelidze, G D, Novikov, E A, Peshekhonov, V D, Shafranov, M D, and Zhil`tsov, V E.
1994.
"Cathode Readout with Stripped Resistive Drift Tubes."
JINR.
@misc{etde_10125248,
title = {Cathode Readout with Stripped Resistive Drift Tubes}
author = {Bychkov, V N, Kekelidze, G D, Novikov, E A, Peshekhonov, V D, Shafranov, M D, and Zhil`tsov, V E}
abstractNote = {A straw tube drift chamber prototype has been constructed and tested. The straw tube material is mylar film covered with carbon layer of resistivity 0.5, 30 and 70 k Ohm/sq. The gas mixture used was Ar/CH{sub 4}. Both the anode wire and cathode signals were detected in order to study the behaviour of the chamber in the presence of X-ray ionization. The construction and the results of the study are presented. 7 refs., 11 figs., 1 tab.}
place = {JINR}
year = {1994}
month = {Dec}
}
title = {Cathode Readout with Stripped Resistive Drift Tubes}
author = {Bychkov, V N, Kekelidze, G D, Novikov, E A, Peshekhonov, V D, Shafranov, M D, and Zhil`tsov, V E}
abstractNote = {A straw tube drift chamber prototype has been constructed and tested. The straw tube material is mylar film covered with carbon layer of resistivity 0.5, 30 and 70 k Ohm/sq. The gas mixture used was Ar/CH{sub 4}. Both the anode wire and cathode signals were detected in order to study the behaviour of the chamber in the presence of X-ray ionization. The construction and the results of the study are presented. 7 refs., 11 figs., 1 tab.}
place = {JINR}
year = {1994}
month = {Dec}
}