"TITLE","AUTHORS","SUBJECT","SUBJECT_RELATED","DESCRIPTION","PUBLISHER","AVAILABILITY","RESEARCH_ORG","SPONSORING_ORG","PUBLICATION_COUNTRY","PUBLICATION_DATE","CONTRIBUTING_ORGS","LANGUAGE","RESOURCE_TYPE","TYPE_QUALIFIER","JOURNAL_ISSUE","JOURNAL_VOLUME","RELATION","COVERAGE","FORMAT","IDENTIFIER","REPORT_NUMBER","DOE_CONTRACT_NUMBER","OTHER_IDENTIFIER","DOI","RIGHTS","ENTRY_DATE","OSTI_IDENTIFIER","PURL_URL" "Testing of ceramic filter materials at the PCFB test facility; Keraamisten suodinmateriaalien testaus PCFB-koelaitoksessa","Kuivalainen, R; Eriksson, T; Lehtonen, P; Tiensuu, J [Foster Wheeler Energia Oy, Karhula (Finland)]","01 COAL, LIGNITE, AND PEAT; 54 ENVIRONMENTAL SCIENCES; HOT GAS CLEANUP; FLUIDIZED-BED COMBUSTION; CIRCULATING SYSTEMS; FLUIDIZED BED BOILERS; PRESSURIZATION; CERAMICS; COAL; FILTERS; FLUE GAS; PERFORMANCE TESTING; MATERIALS TESTING","","Pressurized Circulating Fluidized Bed (PCFB) combustion technology has been developed in Karhula, Finland since 1986. In 1989, a 10 MW PCFB test facility was constructed. The test facility has been used for performance testing with different coal types through the years 1990-1994 for obtaining data for design and commercialization of the high-efficiency low-emission PCFB combustion technology. The main objective of the project Y53 was to evaluate advanced candle filter materials for the Hot Gas Clean-up Unit (HGCU) to be used in a commercial PCFB Demonstration Project. To achieve this goal, the selected candle materials were exposed to actual high temperature, high pressure coal combustion flue gases for a period of 1000-1500 h during the PCFB test runs. The test runs were carried out in three test segments in Foster Wheeler`s PCFB test facility at the Karhula R and D Center. An extensive inspection and sampling program was carried out after the second test segment. Selected sample candles were analyzed by the filter supplier and the preliminary results were encouraging. The material strength had decreased only within expected range. Slight elongation of the silicon carbide candles was observed, but at this phase the elongation can not be addressed to creep, unlike in the candles tested in 1993-94. The third and last test segment was completed successfully in October 1996. The filter system was inspected and several sample candles were selected for material characterization. The results will be available in February - March 1997. (orig.)","","OSTI as DE98701757","Aabo Akademi, Turku (Finland). Combustion Chemistry Research Group","","Finland","1997-10-01","","Finnish","Technical Report","","","","Other Information: DN: LIEKKI 2 Research Programme; PBD: 1997; Related Information: Is Part Of LIEKKI 2 - Annual Review 1997. Project reports; Hupa, M.; Matinlinna, J.; Ljung, M. [eds.]; PB: 484 p.","","Medium: ED; Size: pp. 729-734","ON: DE98701757; CNN: Project TEKES-LIEKKI2-Y53; ISBN 951-650-955-X","AAA-LIEKKI-L97-1-Pt.2","","Other: ON: DE98701757; CNN: Project TEKES-LIEKKI2-Y53; ISBN 951-650-955-X; TRN: FI9703586","https://doi.org/","","2018-05-17","531315","https://www.osti.gov/etdeweb/servlets/purl/531315"