Method of energy load management using PCM for heating and cooling of buildings
Abstract
A method of energy load management for the heating and cooling of a building. The method involves utilizing a wallboard as a portion of the building, the wallboard containing about 5 to about 30 wt. % a phase change material such that melting of the phase change material occurs during a rise in temperature within the building to remove heat from the air, and a solidification of the phase change material occurs during a lowering of the temperature to dispense heat into the air. At the beginning of either of these cooling or heating cycles, the phase change material is preferably "fully charged". In preferred installations one type of wallboard is used on the interior surfaces of exterior walls, and another type as the surface on interior walls. The particular PCM is chosen for the desired wall and room temperature of these locations. In addition, load management is achieved by using PCM-containing wallboard that form cavities of the building such that the cavities can be used for the air handling duct and plenum system of the building. Enhanced load management is achieved by using a thermostat with reduced dead band of about the upper half of a normal dead bandmore »
- Inventors:
-
- Knoxville, TN
- Issue Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- OSTI Identifier:
- 870350
- Patent Number(s):
- 5501268
- Assignee:
- Martin Marietta Energy Systems, Inc. (Oak Ridge, TN)
- Patent Classifications (CPCs):
-
F - MECHANICAL ENGINEERING F24 - HEATING F24F - AIR-CONDITIONING
F - MECHANICAL ENGINEERING F28 - HEAT EXCHANGE IN GENERAL F28D - HEAT-EXCHANGE APPARATUS, NOT PROVIDED FOR IN ANOTHER SUBCLASS, IN WHICH THE HEAT-EXCHANGE MEDIA DO NOT COME INTO DIRECT CONTACT
- DOE Contract Number:
- AC05-84OR21400
- Resource Type:
- Patent
- Country of Publication:
- United States
- Language:
- English
- Subject:
- method; energy; load; management; pcm; heating; cooling; buildings; building; involves; utilizing; wallboard; portion; containing; 30; wt; phase; change; material; melting; occurs; rise; temperature; remove; heat; air; solidification; lowering; dispense; beginning; cycles; preferably; charged; preferred; installations; type; interior; surfaces; exterior; walls; surface; particular; chosen; desired; wall; locations; addition; achieved; pcm-containing; form; cavities; handling; duct; plenum; enhanced; thermostat; reduced; dead; band; upper; half; normal; degree; applications; circulation; rate; convection; provides; additional; comfort; provides additional; interior walls; remove heat; interior wall; change material; method involves; phase change; interior surface; interior surfaces; exterior wall; load management; method involve; energy load; /165/126/252/392/
Citation Formats
Stovall, Therese K, and Tomlinson, John J. Method of energy load management using PCM for heating and cooling of buildings. United States: N. p., 1996.
Web.
Stovall, Therese K, & Tomlinson, John J. Method of energy load management using PCM for heating and cooling of buildings. United States.
Stovall, Therese K, and Tomlinson, John J. Mon .
"Method of energy load management using PCM for heating and cooling of buildings". United States. https://www.osti.gov/servlets/purl/870350.
@article{osti_870350,
title = {Method of energy load management using PCM for heating and cooling of buildings},
author = {Stovall, Therese K and Tomlinson, John J},
abstractNote = {A method of energy load management for the heating and cooling of a building. The method involves utilizing a wallboard as a portion of the building, the wallboard containing about 5 to about 30 wt. % a phase change material such that melting of the phase change material occurs during a rise in temperature within the building to remove heat from the air, and a solidification of the phase change material occurs during a lowering of the temperature to dispense heat into the air. At the beginning of either of these cooling or heating cycles, the phase change material is preferably "fully charged". In preferred installations one type of wallboard is used on the interior surfaces of exterior walls, and another type as the surface on interior walls. The particular PCM is chosen for the desired wall and room temperature of these locations. In addition, load management is achieved by using PCM-containing wallboard that form cavities of the building such that the cavities can be used for the air handling duct and plenum system of the building. Enhanced load management is achieved by using a thermostat with reduced dead band of about the upper half of a normal dead band of over three degree. In some applications, air circulation at a rate greater than normal convection provides additional comfort.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Jan 01 00:00:00 EST 1996},
month = {Mon Jan 01 00:00:00 EST 1996}
}
Works referenced in this record:
Analysis Of Wallboard Containing A Phase Change Material
conference, January 1990
- Tomlinson, J. J.; Heberle, D. O.
- Proceedings of the 25th Intersociety Energy Conversion Engineering Conference