December 2016 Most Viewed Documents for Materials

  1. The influence of grain size on the mechanical properties of steel
    Morris, Jr., J. W. (2001)

    884

  2. Fatigue design curves for 6061-T6 aluminum
    Yahr, G.T. (1993)

    867

  3. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    670

  4. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    513

  5. Mechanical properties and energy absorption characteristics of a polyurethane foam
    Goods, S.H.; Neuschwanger, C.L.; Henderson, C.; Skala, D.M. (1997)

    402

  6. Results of charpy V-notch impact testing of structural steel specimens irradiated at {approximately}30{degrees}C to 1 x 10{sup 16} neutrons/cm{sup 2} in a commercial reactor cavity
    Iskander, S.K.; Stoller, R.E. (1997)

    366

  7. Comparison of three Ni-Hard I alloys
    Dogan, Omer N.; Hawk, Jeffrey A.; Rice, J. (Texaloy Foundry Co., Inc., Floresville, Texas) (2004)

    232

  8. Sensitization, intergranular attack, stress corrosion cracking, and irradiation effects on the corrosion of iron--chromium--nickel alloys
    Wu, P.C.S. (1978)

    216

  9. Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings - Literature Review
    Lundin, C.D.; Zhou, G.; Ruprecht, W. (1999)

    211

  10. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    202

  11. Verification of Allowable Stresses In ASME Section III Subsection NH For Grade 91 Steel & Alloy 800H
    R. W. Swindeman; M. J. Swindeman; B. W. Roberts; B. E. Thurgood; D. L. Marriott (2007)

    169

  12. Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings - Final Report
    Lundin, C.D.; Zhou, G.; Ruprecht, W. (1999)

    152

  13. P-type doping of GaN
    Wong, Raechelle Kimberly [Univ. of California, Berkeley, CA (United States)] (2000)

    140

  14. A study of polyether-polyol- and polyester-polyol-based rigid urethane foam systems
    Madden, J.P.; Baker, G.K.; Smith, C.H. (1971)

    136

  15. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
    ALLAN,M.L. (1999)

    135

  16. Gating of Permanent Molds for Aluminum Casting
    David Schwam; John F. Wallace; Tom Engle; Qingming Chang (2004)

    110

  17. Graphite design handbook
    Ho, F.H. (1988)

    102

  18. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    101

  19. The Band Gap of AlGaN Alloys
    Biefeld, R.M.; Crawford, M.H.; Han, J.; Lee, S.R.; Petersen, G.A.; Wright, A.F. (1999)

    97

  20. Grain refinement of permanent mold cast copper base alloys. Final report
    Sadayappan, M.; Thomson, J. P.; Elboujdaini, M.; Gu, G. Ping; Sahoo, M. (2004)

    93

Last updated on Tuesday 17 January 2017