UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data

doi:10.21947/1483809

Title: UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data

Abstract

Sequence G: Upwind Teetered (F) Test sequence G used an upwind, teetered turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds and angles of ±10° were achieved at the high wind speeds. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected.

Creator(s)/Author(s):: Fingersh, Lee

Publication Date:: 2019-12-11

DOE Contract Number:: 67025F

Product Type:: Dataset

Research Org.:: Atmosphere to Electrons (A2e) Data Archive and Portal, Pacific Northwest National Laboratory; PNNL

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Wind and Water Technologies Office (EE-4W)

Subject:: 17 Wind Energy

OSTI Identifier:: 1483809

DOI:: 10.21947/1483809

Citation Formats


                    Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data.  United States: N. p., 2019. 
        Web.  doi:10.21947/1483809.

Copy to clipboard


                    Fingersh, Lee. UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data.  United States.  doi:10.21947/1483809.

Copy to clipboard


                    Fingersh, Lee. 2019.  
"UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data".  United States.  doi:10.21947/1483809.  https://www.osti.gov/servlets/purl/1483809. Pub date:Wed Dec 11 00:00:00 EST 2019

Copy to clipboard


                    
@article{osti_1483809,

  title        = {UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence G - Raw Data},

  author       = {Fingersh, Lee},

  abstractNote = {Sequence G: Upwind Teetered (F) Test sequence G used an upwind, teetered turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds and angles of ±10° were achieved at the high wind speeds. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected.},

  doi          = {10.21947/1483809},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {2019},

  month        = {12}

}

Copy to clipboard

Dataset:

View Dataset

DOI: 10.21947/1483809

Save / Share:

Export Metadata

Save to My Library

Atmosphere to Electrons (A2e)

Sivaraman, Chitra

A2e is a multi-year, multi-stakeholder DOE research and development initiative tasked with improving wind plant performance and mitigating risk and uncertainty to achieve substantial reduction in the cost of wind energy production. The A2e strategic vision will enable a new generation of wind plant technology, in which smart wind plants are designed to achieve optimized performance stemming from more complete knowledge of the inflow wind resource and complex flow through the wind plant. Focus areas include high fidelity modeling, verification, and validation; aeroacoustics; integrated wind plant control; integrated systems and analysis; reliability; and data archiving.

Similar records in DOE Data Explorer and OSTI.GOV collections:

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence Q - Raw Data

Dataset Fingersh, Lee

Sequence Q: Dynamic Inflow (P) This sequence was designed to characterize the dynamic inflow variation using the five-hole probes that extend upwind of the leading edge of the blade. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speeds ranged from 5 m/s to 15 m/s, and data were collected at a 0° yaw angle. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data filemore »« less
UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence W - Raw Data

Dataset Fingersh, Lee

Sequence W: Extended Blade (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 21 m/s, and the yaw angle was held at 0°. The blade pitch angle was 3°. The rotor rotated at 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and the plugs were installed. Plastic tape 0.03-mm thick was used to smooth the interface between the plugs and the blade. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measuredmore »« less
UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence 5 - Raw Data

Dataset Fingersh, Lee

Sequence 5: Sweep Wind Speed (F,P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed was ramped from 5 m/s to 25 m/s by the wind tunnel operator. This was repeated with a decreasing ramp. The yaw angle was maintained at 0°. The blade tip pitch was 3° or 6°. The rotor rotated at 72 RPM. Blade pressure and probe measurements were collected for both pitch angles. The five-hole probes were removed and the plugs were installed for another 3° pitch case. Plastic tape 0.03 mm thick was used to smooth the interfacemore »« less
UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence B - Raw Data

Dataset Fingersh, Lee

Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F), Downwind High Pitch (F) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. Themore »« less
UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence C - Raw Data

Dataset Fingersh, Lee

Sequences B, C, and D: Downwind Baseline (F), Downwind Low Pitch (F), Downwind High Pitch (F) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of ±180° were achieved at low wind speeds, and yaw angles of -20° to 10° were achieved for high wind speeds. The blade tip pitch was 3° for sequence B, 0° for sequence C, and 6° for sequence D. These three sequences were interleaved during testing because the pitch angle change was easily made by the turbine operator. Themore »« less

Similar Records

Research Org:	Pacific Northwest National Lab. (PNNL), Richland, WA (United States); National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States); National Oceanic and Atmospheric Administration (NOAA); National Weather Service (NWS)
Sponsoring Org:	USDOE Office of Energy Efficiency and Renewable Energy (EERE), Wind Energy Technologies Office (EE-4WE)