Utah FORGE: Observation Well Data

Nash, Greg

doi:10.15121/1452738

Title: Utah FORGE: Observation Well Data

Dataset
Other Related Research

Abstract

This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s and 1980s.

Authors:: Nash, Greg

Publication Date:: Thu Feb 22 00:00:00 EST 2018

Other Number(s):: 1008

DOE Contract Number:: EE0007080

Research Org.:: USDOE Geothermal Data Repository (United States); Energy and Geoscience Institute at the University of Utah

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (EE-2C)

Collaborations:: Energy and Geoscience Institute at the University of Utah

Subject:: 15 Geothermal Energy

Keywords:: geothermal; energy; temperature logs; FORGE; Utah FORGE; Roosevelt Hot Springs; Blundel Power Plant; mud logs; Roosevelt Hot Springs Observation Wells; temperature survey; geologic log; lithology log; well log; Utah; well; log; data; observation; temperature; OH-4; OH-1; OH-5; OH-7; mud log; well data; resource; characterization; Milford; EGS

Geolocation:: 38.5148,-112.879748|38.483935,-112.879748|38.483935,-112.916367|38.5148,-112.916367|38.5148,-112.879748

OSTI Identifier:: 1452738

DOI:: https://doi.org/10.15121/1452738

Project Location:

Citation Formats


                    Nash, Greg. Utah FORGE: Observation Well Data.  United States: N. p., 2018. 
        Web.  doi:10.15121/1452738.

Copy to clipboard


                    Nash, Greg. Utah FORGE: Observation Well Data.  United States.  doi:https://doi.org/10.15121/1452738

Copy to clipboard


                    Nash, Greg. 2018.  
"Utah FORGE: Observation Well Data".  United States.  doi:https://doi.org/10.15121/1452738.  https://www.osti.gov/servlets/purl/1452738. Pub date:Thu Feb 22 00:00:00 EST 2018

Copy to clipboard


                    
@article{osti_1452738,

  title        = {Utah FORGE: Observation Well Data},

  author       = {Nash, Greg},

  abstractNote = {This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s and 1980s.},

  doi          = {10.15121/1452738},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Thu Feb 22 00:00:00 EST 2018},

  month        = {Thu Feb 22 00:00:00 EST 2018}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1452738

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Utah FORGE: Phase 2C Seismic Observation and Ground Water Well Data and Well Locations

Dataset Abraham, Sam ; Mann, Mary ; Curtis, T. ; ...

This submission contains the following data associated with Utah FORGE Phase 2C within the Roosevelt Hot Springs geothermal area: - An ArcGIS shapefile with well locations for wells 58-32, 78-32, 68-32, OH-3, OH-4, WOW-2, and WOW-3. Well 58-32 is the deep test well, wells 68-32 and 78-32 are seismic test wells, and the OH and WOW wells were used for ground water monitoring and temperature gradient logging. - Drilling reports, lithologic logs, daily drilling reports, cuttings logs, and drilling photos for seismic monitoring wells 78-32 and 68-32. - Raw and post-processing temperature logs for wells OH-3, OH-4, WOW-2, and WOW-4.more »« less
Utah FORGE: GIS Well Temperature Data

Dataset Gwynn, Mark ; Hill, Jay ; Allis, Rick

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in degrees Fahrenheit. The temperature values at specific depths as mentioned above were derived as follows. In cases where the well reached a given depth (200 m and 1, 2, 3, or 4 km), the temperature is the measured temperature. For the shallower wells (and at deeper depths in the wells reaching onemore »« less
Utah FORGE: Deep Well 58-32 (MU-ESW1) Core Data

Dataset Nash, Greg ; Moore, Joe

These datasets, images, and graphics were derived from core drilling and core that was extracted from Utah Forge deep well 58-32 (originally called MU-ESW1), near Roosevelt Hot Springs.
Utah FORGE: Well 58-32 Injection Test Data

Dataset Podgorney, Robert ; McLennan, John

This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site suitability confirmatory testing.
Utah FORGE: Well Data for Student Competition

Dataset Podgorney, Robert ; McLennan, John ; Moore, Joe ; ...

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While the conditions encountered in the well were not suitable for developing a conventional hydrothermal system, the information obtained suggested the region may be suitable for an enhanced geothermal system. Geophysical well logs were collected in both wells to obtain useful information regarding there nature of the subsurface materials. For the recent testing of 58-32, the Utah FORGE Project contracted withmore »« less

Similar Records