DOE Data Explorer title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Radar - 449MHz - North Bend, OR (OTH) - Raw Data

Abstract

**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocitymore » (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.« less

Authors:

  1. ESRL/PSD
Publication Date:
DOE Contract Number:  
67025F
Research Org.:
Pacific Northwest National Laboratory (PNNL), Richland, WA (United States). Atmosphere to Electrons (A2e) Data Archive and Portal
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Wind and Water Technologies Office (EE-4W)
Subject:
17 Wind Energy
OSTI Identifier:
1328933
DOI:
https://doi.org/10.21947/1328933

Citation Formats

Gottas, Daniel. Radar - 449MHz - North Bend, OR (OTH) - Raw Data. United States: N. p., 2023. Web. doi:10.21947/1328933.
Gottas, Daniel. Radar - 449MHz - North Bend, OR (OTH) - Raw Data. United States. doi:https://doi.org/10.21947/1328933
Gottas, Daniel. 2023. "Radar - 449MHz - North Bend, OR (OTH) - Raw Data". United States. doi:https://doi.org/10.21947/1328933. https://www.osti.gov/servlets/purl/1328933. Pub date:Tue Oct 10 00:00:00 EDT 2023
@article{osti_1328933,
title = {Radar - 449MHz - North Bend, OR (OTH) - Raw Data},
author = {Gottas, Daniel},
abstractNote = {**Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files.},
doi = {10.21947/1328933},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Tue Oct 10 00:00:00 EDT 2023},
month = {Tue Oct 10 00:00:00 EDT 2023}
}