McGinness Hills Well 27A-10 Daily Drilling Report Data

Knudsen, Steven

doi:10.15121/1154731

Title: McGinness Hills Well 27A-10 Daily Drilling Report Data

Dataset
Other Related Research

Abstract

This data should be used with the daily drilling record and other data which can be obtained from the contact listed below

Authors:: Knudsen, Steven

Publication Date:: Tue Mar 25 00:00:00 EDT 2014

Other Number(s):: 436

DOE Contract Number:: FY14 AOP 3.6.1.3

Research Org.:: USDOE Geothermal Data Repository (United States); Sandia National Laboratories Geothermal Research Department

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Geothermal Technologies Office

Collaborations:: Sandia National Laboratories Geothermal Research Department

Subject:: 15 Geothermal Energy

Keywords:: geothermal; McGinness Hills ; drilling record; Drilling Record; McGinness Hills Field

OSTI Identifier:: 1154731

DOI:: https://doi.org/10.15121/1154731

Citation Formats


                    Knudsen, Steven. McGinness Hills Well 27A-10 Daily Drilling Report Data.  United States: N. p., 2014. 
        Web.  doi:10.15121/1154731.

Copy to clipboard


                    Knudsen, Steven. McGinness Hills Well 27A-10 Daily Drilling Report Data.  United States.  doi:https://doi.org/10.15121/1154731

Copy to clipboard


                    Knudsen, Steven. 2014.  
"McGinness Hills Well 27A-10 Daily Drilling Report Data".  United States.  doi:https://doi.org/10.15121/1154731.  https://www.osti.gov/servlets/purl/1154731. Pub date:Tue Mar 25 00:00:00 EDT 2014

Copy to clipboard


                    
@article{osti_1154731,

  title        = {McGinness Hills Well 27A-10 Daily Drilling Report Data},

  author       = {Knudsen, Steven},

  abstractNote = {This data should be used with the daily drilling record and other data which can be obtained from the contact listed below},

  doi          = {10.15121/1154731},

  journal      = {},

  number       = ,

  volume       = ,

  place        = {United States},

  year         = {Tue Mar 25 00:00:00 EDT 2014},

  month        = {Tue Mar 25 00:00:00 EDT 2014}

}

Copy to clipboard

Dataset:

View Dataset

DOI: https://doi.org/10.15121/1154731

Save / Share:

Export Metadata

Save to My Library

Similar records in DOE Data Explorer and OSTI.GOV collections:

Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

Dataset Faulds, James E

Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross-sections in Adobe Illustrator format. Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross-sections, drill-hole data, and geophysics.
Utah FORGE Well 78B-32 Daily Drilling Reports and Logs

Dataset McLennan, John

This data set includes the daily drilling reports and Pason data for well 78B-32 and Schlumberger logs acquired after drilling completion. This well was drilled between June 27th and July 31st of 2021. Also included is raw and processed data for a variety of well data metrics including temperature, porosity, density, and sonic data. This data was taken at the Utah FORGE site as part of the Utah FORGE project.
Slip and Dilation Tendency Analysis of McGinness Hills Geothermal Area

Dataset E., James

Slip and Dilation Tendency in focus areas Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an indication of which faults or fault segments within a geothermal system are critically stressed and therefore likely to transmit geothermal fluids. The slip tendency of a surface is defined by the ratio of shear stress to normal stress on that surface: Ts = T / on (Morrismore »« less
3D Model of the McGinness Hills Geothermal Area

Dataset E. Faulds, James

The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad accommodation zone lies a fault step-over defined by north-northeast striking, west-dipping normal faults which step to the left at roughly the latitude of the McGinness Hills geothermal system. The McGinness Hills 3D model consists of 9 geologic units and 41 faults. The basal geologic units are metasediments of the Ordovician Valmy and Vininni Formations (undifferentiated in the model)more »« less
Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy

Dataset Dadi, Sireesh ; Titov, Aleksei ; Norbeck, Jack ; ...

These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting adjacent to an operating geothermal power station in north-central Nevada and is designed to deliver an uplift in high-temperature geothermal flow rates to increase the power capacity at the facility. The project involved drilling a first-of-a-kind EGS horizontal doublet well system consisting of an injection and production well pair within a high-temperature hard-rock geothermal formation. The lithology of the target reservoir ismore »« less

Similar Records