Novel Approach for Selective Emitter Formation and Front Side Metallization of Crystalline Silicon Solar Cells
- Palo Alto Research Center, CA (United States)
In this project we will explore the possibility of forming the front side metallization and selective emitter layer for the crystalline silicon solar cells through using selective laser ablation to create contact openings on the front surface and a screen printer to make connections with conductive paste. Using this novel approach we expect to reduce the specific contact resistance of the silver gridlines by about one order of magnitude compared to the state-of-art industrial crystalline silicon solar cells to below 1 mΩ∙cm2, and use lightly doped n+ emitter layer with sheet resistance of not smaller than 100 Ω. This represents an enabling improvement on crystalline silicon solar cell performance and can increase the absolute efficiency of the solar cell by about 1%. In this scientific report we first present our result on the selective laser ablation of the nitride layer to make contact openings. Then we report our work on the solar cell fabrication by using the laser ablated contact openings with self-doping paste. Through various electrical property characterization and SIMS analysis, the factors limiting the cell performance have been discussed. While through this proof-of-concept project we could not reach the target on cell efficiency improvement, the process to fabricate 125mm full-sized silicon solar cells using laser ablation and self-doping paste has been developed, and a much better understanding of technical challenges has been achieved. Future direction to realize the potential of the new technology has been clearly defined.
- Research Organization:
- Palo Alto Research Center, CA (United States)
- Sponsoring Organization:
- USDOE Office of Solar Energy Technology Program (EE-2A)
- DOE Contract Number:
- EE0000584
- OSTI ID:
- 983937
- Report Number(s):
- DOE EE0000584; TRN: US201106%%279
- Country of Publication:
- United States
- Language:
- English
Similar Records
Rapid Patterning and Advanced Device Structures for Low Cost Manufacturable Crystalline Si IBC Cells
Low cost back contact heterojunction solar cells on thin c-Si wafers. integrating laser and thin film processing for improved manufacturability