skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Neutronic, thermal-hydraulic, and structural analyses of the electron target for an accelerator-driven subcritical system.

Abstract

No abstract prepared.

Authors:
; ; ; ; ;
Publication Date:
Research Org.:
Argonne National Lab. (ANL), Argonne, IL (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
982626
Report Number(s):
ANL/NE/CP-59893
TRN: US1005345
DOE Contract Number:
DE-AC02-06CH11357
Resource Type:
Conference
Resource Relation:
Conference: 8th International Topical Meeting on Nuclear Applications and Utilization of Accelerators (AccApp'07); Jul. 30, 2007 - Aug. 2, 2007; Pocatello, ID
Country of Publication:
United States
Language:
ENGLISH
Subject:
43 PARTICLE ACCELERATORS; ACCELERATORS; ELECTRONS; MEETINGS; TARGETS; USES

Citation Formats

Sofu, T., Gohar, Y., Belch, H., Zhong, Z., Naberezhnev, D., and Nuclear Engineering Division. Neutronic, thermal-hydraulic, and structural analyses of the electron target for an accelerator-driven subcritical system.. United States: N. p., 2007. Web.
Sofu, T., Gohar, Y., Belch, H., Zhong, Z., Naberezhnev, D., & Nuclear Engineering Division. Neutronic, thermal-hydraulic, and structural analyses of the electron target for an accelerator-driven subcritical system.. United States.
Sofu, T., Gohar, Y., Belch, H., Zhong, Z., Naberezhnev, D., and Nuclear Engineering Division. Mon . "Neutronic, thermal-hydraulic, and structural analyses of the electron target for an accelerator-driven subcritical system.". United States. doi:.
@article{osti_982626,
title = {Neutronic, thermal-hydraulic, and structural analyses of the electron target for an accelerator-driven subcritical system.},
author = {Sofu, T. and Gohar, Y. and Belch, H. and Zhong, Z. and Naberezhnev, D. and Nuclear Engineering Division},
abstractNote = {No abstract prepared.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Jan 01 00:00:00 EST 2007},
month = {Mon Jan 01 00:00:00 EST 2007}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • The target system, whose function is to supply an external neutron source to the ADS sub-critical core to sustain the neutron chain reaction, is the most critical part of an ADS being subject to severe thermo-mechanical loading and material damage due to accelerator protons and fission neutrons. A windowless option was chosen as reference configuration for the target system of the LBE-cooled ADS within the European PDS-XADS project in order to reduce the material damage and to increase its life. This document deals with the thermo-hydraulic results of the calculations performed with STAR-CD and RELAP5 codes for studying the behaviourmore » of the windowless target system during off-normal operating conditions. It also reports a description of modifications properly implemented in the codes needed for this analysis. The windowless target system shows a satisfactory thermo-hydraulic behaviour for the analysed accidents, except for the loss of both pumps without proton beam shut-off and the beam trips lasting more than one second. (authors)« less
  • A growing interest in accelerator-driven systems (ADSs) has led to the establishment in Italy of a basic research and development program aimed at the study of the physics and technological development needed to design an ADS for nuclear waste transmutation. In the framework of this program, ENEA and Politecnico di Torino are carrying out some neutronic analyses focused on an ADS prototype of small size, named EAP80 [{approx}80 MW(thermal)], fueled with a standard fast reactor fuel (Superphenix 1 type), and cooled by Pb/Bi. The EAP80 prototype was conceived with close reference to Rubbia et al.'s energy amplifier proposal. Current neutronicmore » activities cover the development of computational tools and static and kinetics analyses. This paper summarizes some preliminary results and specifications.« less
  • A subcritical facility driven by an electron accelerator is planned at the Kharkov Institute of Physics and Technology (KIPT) in Ukraine for medical isotope production, materials research, training, and education. The conceptual design of the facility is being pursued through collaborations between ANL and KIPT. As part of the design effort, the high-fidelity analyses of various target options are performed with formulations to reflect the realistic configuration and the three dimensional geometry of each design. This report summarizes the results of target design optimization studies for electron beams with two different beam profiles. The target design optimization is performed viamore » the sequential neutronic, thermal-hydraulic, and structural analyses for a comprehensive assessment of each configuration. First, a target CAD model is developed with proper emphasis on manufacturability to provide a basis for separate but consistent models for subsequent neutronic, thermal-hydraulic, and structural analyses. The optimizations are pursued for maximizing the neutron yield, streamlining the flow field to avoid hotspots, and minimizing the thermal stresses to increase the durability. In addition to general geometric modifications, the inlet/outlet channel configurations, target plate partitioning schemes, flow manipulations and rates, electron beam diameter/width options, and cladding material choices are included in the design optimizations. The electron beam interactions with the target assembly and the neutronic response of the subcritical facility are evaluated using the MCNPX code. the results for the electron beam energy deposition, neutron generation, and utilization in the subcritical pile are then used to characterize the axisymmetric heat generation profiles in the target assembly with explicit simulations of the beam tube, the coolant, the clad, and the target materials. Both tungsten and uranium are considered as target materials. Neutron spectra from tungsten and uranium are very similar allowing the use of either material in the subcritical assembly without changing its characteristics. However, the uranium target has a higher neutron yield, which increases the neutron flux of the subcritical assembly. Based on the considered dimensions and heat generation profiles, the commercial CFD software Star-CD is used for the thermal-hydraulic analysis of each target design to satisfy a set of thermal criteria, the most limiting of which being to maintain the water temperature 50 below the boiling point. It is found that the turbulence in the inlet channels dissipates quickly in narrow gaps between the target plates and, as a result, the heat transfer is limited by the laminar flow conditions. On average, 3-D CFD analyses of target assemblies agree well with 1-D calculations using RELAP (performed by KIPT). However, the recirculation and stagnation zones predicted with the CFD models prove the importance of a 3-D analysis to avoid the resulting hotspots. The calculated temperatures are subsequently used for the structural analysis of each target configuration to satisfy the other engineering design requirements. The thermo-structural calculations are performed mostly with NASTRAN and the results occasionally compared with the results from MARC. Both, NASTRAN and MARC are commercially available structural-mechanics analysis software. Although, a significant thermal gradient forms in target elements along the beam direction, the high thermal stresses are generally observed peripherally around the edge of thin target disks/plates. Due to its high thermal conductivity, temperatures and thermal stresses in tungsten target are estimated to be significantly lower than in uranium target. The deformations of the target disks/plates are found to be insignificant, which eliminate concerns for flow blockages in narrow coolant channels. Consistent with the specifications of the KIPT accelerator to be used in this facility, the electron beam power is 100-kW with electron energy in the range of 100 to 200 MeV. As expected, the 100 MeV electrons deposit their energy faster while the 200-MeV electrons spread their energy deposition further along the beam direction. However in that electron energy range, the energy deposition profiles near the beam window require very thin target plates/disks to limit the temperatures and thermal stresses.« less
  • High-fidelity analysis has been utilized in the design of beam target options for an accelerator driven subcritical system. Designs featuring stacks of plates with square cross section have been investigated for both tungsten and uranium target materials. The presented work includes the first thermal-hydraulic simulations of the full, detailed target geometry. The innovative target cooling manifold design features many regions with complex flow features, including 90 bends and merging jets, which necessitate three-dimensional fluid simulations. These were performed using the commercial computational fluid dynamics code STAR-CCM+. Conjugate heat transfer was modeled between the plates, cladding, manifold structure, and fluid. Steady-statemore » simulations were performed but lacked good residual convergence. Unsteady simulations were then performed, which converged well and demonstrated that flow instability existed in the lower portion of the manifold. It was established that the flow instability had little effect on the peak plate temperatures, which were well below the melting point. The estimated plate surface temperatures and target region pressure were shown to provide sufficient margin to subcooled boiling for standard operating conditions. This demonstrated the safety of both potential target configurations during normal operation.« less
  • As part of the effort to investigate the use of an electron accelerator driven system for TRU transmutation, the effects of TRU distributions in the core on transmuter system performance was examined in this paper. The system performance examined includes the transmutation and system power efficiency and changes in power peaking. The transmutation benefits of the system were determined with the introduction of a new parameter, the Transmutation System Effectiveness Parameter (TSEP). TSEP combines the decay heat and radioactivity results into one single parameter that compares the ability of the system to reduce the radioactivity and decay heat of themore » loaded TRUs. The electron ADS was modeled by using MCNPX and MONTEBURNS as a fast spectrum, Na cooled reactor loosely based on the advanced liquid metal reactor (ALMR) design. NJOY was used to process the cross sections at the desired temperatures. The fuel was a TRUZr alloy contained within an HT-9 SS cladding. The subcritical reactor contained four different fuel zones with an equal number of fuel assemblies in each region, each containing one of the four TRU elements: Np, Pu, Cm, Am. Tungsten was used for the target system. The electron ADS was assumed to operate at 500 MWth over a 24 month cycle. Results showed that different distribution patterns had a very insignificant effect on the total radioactivity reduction, the total decay heat reduction, and the TRU radiotoxicity reduction. With respect to the TSEP parameter, the calculation results revealed a much stronger dependence on TRU distributions. It seemed that TSEP accurately reflected and penalized the effectiveness of the system for the fission product production. With respect to examining the k{sub eff} over the cycle, a drastic difference was observed between the cases when Pu is located in the inner most region and the rest of the patterns. The k{sub eff} for the Pu in the inner most region cases decreased at a much faster rate than did the rest therefore requiring a dramatic increase in beam current over the cycle. The power peaking behavior of the system was found to be dictated by the placement of the Pu material region. The lowest total power peaking as well as the lowest relative assembly power peaking was experienced when the inner most region was filled with Np, followed by Pu, and then by Am and Cm. (authors)« less