Comparison Between Nb3Al and Nb3Sn Strands and Cables for High Field Accelerator Magnets
The Nb{sub 3}Al small racetrack magnet, SR07, has been successfully built and tested to its short sample limit beyond 10 Tesla without any training. Thus the practical application of Nb{sub 3}Al strands for high field accelerator magnets is established. The characteristics of the representative F4 strand and cable, are compared with the typical Nb{sub 3}Sn strand and cable. It is represented by the OST high current RRP Nb{sub 3}Sn strand with 108/127 configuration. The effects of Rutherford cabling to both type strands are explained and the inherent problem of the Nb{sub 3}Sn strand is discussed. Also the test results of two representative small racetrack magnets are compared from the stand point of Ic values, and training. The maximum current density of the Nb{sub 3}Al strands is still smaller than that of the Nb{sub 3}Sn strands, but if we take into account of the stress-strain characteristics, Nb{sub 3}Al strands become somewhat favorable in some applications.
- Research Organization:
- Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC02-07CH11359
- OSTI ID:
- 982483
- Report Number(s):
- FERMILAB-CONF-09-710-TD; TRN: US1004405
- Journal Information:
- IEEE Trans.Appl.Supercond.20:1399-1403,2010, Conference: Presented at 21st International Conference on Magnet Technology (MT-21), Hefei, China, 18-23 Oct 2009
- Country of Publication:
- United States
- Language:
- English
Similar Records
Performance of Nb3Sn RRP strands and cables based on a 108/127 stack design
Quench tests and FEM analysis of Nb3Al Rutherford cables and small racetrack magnets