Development of a silicon calorimeter for dosimetry applications in a water-moderated reactor.
- Ktech Corporation, Albuquerque, NM
- Alion Science and Technology, Albuquerque, NM
High fidelity active dosimetry in the mixed neutron/gamma field of a research reactor is a very complex issue. For passive dosimetry applications, the use of activation foils addresses the neutron environment while the use of low neutron response CaF{sub 2}:Mn thermoluminescent dosimeters (TLDs) addresses the gamma environment. While radiation-hardened diamond photoconducting detectors (PCD) have been developed that provide a very precise fast response (picosecond) dosimeter and can provide a time-dependent profile for the radiation environment, the mixed field response of the PCD is still uncertain and this interferes with the calibration of the PCD response. In order to address the research reactor experimenter's need for a dosimeter that reports silicon dose and dose rate at a test location during a pulsed reactor operation, a silicon calorimeter has been developed. This dosimeter can be used by itself to provide a dose in rad(Si) up to a point in a reactor pulsed operation, or, in conjunction with the diamond PCD, to provide a dose rate. This paper reports on the development, testing, and validation of this silicon calorimeter for applications in water-moderated research reactors.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 971822
- Report Number(s):
- SAND2005-2839J; TRN: US1001265
- Journal Information:
- Proposed for publication in ASTM International., Journal Name: Proposed for publication in ASTM International.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Neutron contribution to CaF2:Mn thermoluminescent dosimeter response in mixed (n/y) field environments.
Neutron Contribution to CaF2:Mn Thermoluminescent Dosimeter Response in Mixed (n/y) Field Environments