skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: NSLS-II DESIGN: A NOVEL APPROACH TO LIGHT SOURCE DESIGN

Abstract

The NSLS-II storage ring will be a replacement for the existing two NSLS light sources, which although innovative when proposed, have been exceeded by modern light source designs. NSLS-II design takes a new approach toward providing users with the very bright beams after commissioning and a strategy of evolving to higher brightness beams as more ID devices are installed during its operations. This is achieved not by pushing the basic lattice to lower emittance, an approach that hits severe limits in the control of the dynamic aperture of an ever increasing non-linear lattice. Our approach is rather to reduce the natural emittance using damping wigglers, in addition to damping from the user undulator's. Details on the lattice design are presented.

Authors:
Publication Date:
Research Org.:
Brookhaven National Lab. (BNL), Upton, NY (United States)
Sponsoring Org.:
Doe - Office Of Science
OSTI Identifier:
909935
Report Number(s):
BNL-77586-2007-CP
R&D Project: 12236; KC-20401G; TRN: US0704018
DOE Contract Number:
DE-AC02-98CH10886
Resource Type:
Conference
Resource Relation:
Conference: CONFERENCE PROCEEDINS OF THE ASIAN PARTICLE ACCELERATOR CONFERENCE; INDORE, INDIA; 20070129 through 20070202
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; ACCELERATORS; APERTURES; BRIGHTNESS; COMMISSIONING; DAMPING; DESIGN; LIGHT SOURCES; STORAGE RINGS

Citation Formats

KRAMER,S. NSLS-II DESIGN: A NOVEL APPROACH TO LIGHT SOURCE DESIGN. United States: N. p., 2007. Web.
KRAMER,S. NSLS-II DESIGN: A NOVEL APPROACH TO LIGHT SOURCE DESIGN. United States.
KRAMER,S. Mon . "NSLS-II DESIGN: A NOVEL APPROACH TO LIGHT SOURCE DESIGN". United States. doi:. https://www.osti.gov/servlets/purl/909935.
@article{osti_909935,
title = {NSLS-II DESIGN: A NOVEL APPROACH TO LIGHT SOURCE DESIGN},
author = {KRAMER,S.},
abstractNote = {The NSLS-II storage ring will be a replacement for the existing two NSLS light sources, which although innovative when proposed, have been exceeded by modern light source designs. NSLS-II design takes a new approach toward providing users with the very bright beams after commissioning and a strategy of evolving to higher brightness beams as more ID devices are installed during its operations. This is achieved not by pushing the basic lattice to lower emittance, an approach that hits severe limits in the control of the dynamic aperture of an ever increasing non-linear lattice. Our approach is rather to reduce the natural emittance using damping wigglers, in addition to damping from the user undulator's. Details on the lattice design are presented.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Jan 29 00:00:00 EST 2007},
month = {Mon Jan 29 00:00:00 EST 2007}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • The vertical impedances of the preliminary designs of National Synchrotron Light Source II (NSLS-II) Mini Gap Undulators (MGU) are calculated by means of GdfidL code. The Transverse Mode Coupling Instability (TMCI) thresholds corresponding to these impedances are estimated using an analytically solvable model.
  • In an effort to ensure that the stability goals of the NSLS II will be met once the accelerator structure is set on the selected BNL site a comprehensive evaluation of the ground vibration observed at existing light source facilities has been undertaken. The study has relied on measurement data collected and reported by the operating facilities as well as on new data collected in the course of this study. The primary goal of this comprehensive effort is to compare the green-field conditions that exist in the various sites both in terms of amplitude as well as frequency content andmore » quantify the effect of the interaction of these accelerator facilities with the green-field vibration. The latter represents the ultimate goal of this effort where the anticipated motion of the NSLS II ring is estimated prior to its construction and compared with the required stability criteria.« less
  • Energy network optimization (ENO) models identify new strategies for designing, installing, and controlling stationary combined heat and power (CHP) fuel cell systems (FCSs) with the goals of (1) minimizing electricity and heating costs for building owners and (2) reducing emissions of the primary greenhouse gas (GHG) - carbon dioxide (CO{sub 2}). A goal of this work is to employ relatively inexpensive simulation studies to discover more financially and environmentally effective approaches for installing CHP FCSs. ENO models quantify the impact of different choices made by power generation operators, FCS manufacturers, building owners, and governments with respect to two primary goalsmore » - energy cost savings for building owners and CO{sub 2} emission reductions. These types of models are crucial for identifying cost and CO{sub 2} optima for particular installations. Optimal strategies change with varying economic and environmental conditions, FCS performance, the characteristics of building demand for electricity and heat, and many other factors. ENO models evaluate both 'business-as-usual' and novel FCS operating strategies. For the scenarios examined here, relative to a base case of no FCSs installed, model results indicate that novel strategies could reduce building energy costs by 25% and CO{sub 2} emissions by 80%. Part I of II articles discusses model assumptions and methodology. Part II of II articles illustrates model results for a university campus town and generalizes these results for diverse communities.« less
  • Some of the considerations for an optimal design of a storage ring are outlined and the choices of parameters for the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL) are presented. Also the policy for utilization of NSLS beam lines is described for both the 0.7 GeV (VUV) storage ring and the 2.5 GeV (X-ray) storage ring.
  • We are in the process of developing and commissioning a scanning photoelectron microscope (SPEM) at the X1A beamline of the National Synchrotron Light Source (NSLS). It is designed to make use of the Soft X-ray Undulator (SXU) at the NSLS. This high brightness source illuminates a Fresnel zone plate, which forms a focused probe, {<=} 0.2{mu}m in size, on the specimen surface. A grating monochromator selects the photon energy in the 400-800 eV range with an energy resolution of better than 1 eV. The expected flux in the focus is in the 5 {times} 10{sup 7} {minus} 10{sup 9} photons/smore » range. A single pass Cylindrical Mirror Analyzer (CMA) is used to record photoemission spectra, or to form an image within a fixed electron energy bandwidth as the specimen is mechanically scanned. As a first test, a 1000 mesh Au grid was successfully imaged with a resolution of about 1{mu}m and the CMA tuned to the Au 4 f photoelectron peak. Once it is commissioned, a program is planned which will utilize the microscope to study beam sensitive systems, such as thin oxide/sub-oxide films of alumina and silica, and ultimately various adsorbates on these films. 14 refs., 4 figs.« less