skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Prototype of a Novel Membrane Protein Expression System for Very Large Scale and Economical Production of Membrane Proteins

Authors:
;
Publication Date:
Research Org.:
TransMembrane Biosciences
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
901741
Report Number(s):
DOE/ER/84304
DOE Contract Number:
FG02-05ER84304
Type / Phase:
SBIR
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
60 APPLIED LIFE SCIENCES; Large scale production, membrane proteins, genomics

Citation Formats

Hiep-Hoa T. Nguyen, and Sanjay Jayachandran, Randall M. Story. Prototype of a Novel Membrane Protein Expression System for Very Large Scale and Economical Production of Membrane Proteins. United States: N. p., 2007. Web.
Hiep-Hoa T. Nguyen, & Sanjay Jayachandran, Randall M. Story. Prototype of a Novel Membrane Protein Expression System for Very Large Scale and Economical Production of Membrane Proteins. United States.
Hiep-Hoa T. Nguyen, and Sanjay Jayachandran, Randall M. Story. Sun . "Prototype of a Novel Membrane Protein Expression System for Very Large Scale and Economical Production of Membrane Proteins". United States. doi:.
@article{osti_901741,
title = {Prototype of a Novel Membrane Protein Expression System for Very Large Scale and Economical Production of Membrane Proteins},
author = {Hiep-Hoa T. Nguyen and Sanjay Jayachandran, Randall M. Story},
abstractNote = {},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sun Apr 01 00:00:00 EDT 2007},
month = {Sun Apr 01 00:00:00 EDT 2007}
}

Technical Report:
This technical report may be protected. To request the document, click here.
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that may hold this item. Keep in mind that many technical reports are not cataloged in WorldCat.

Save / Share:
  • This project has demonstrated a new approach to localize binding sites of proteins regulating gene expression (also known as transcription factors) on the genome of bacteria. Knowledge of the precise binding site(s) of a specific transcription factor helps determining its role in the cell cycle and by extension provides further understanding of the mechanisms at play in the organism. The approach entails labeling transcription factors (or any other DNA-binding protein of interest) with quantum dots, a new class of very bright fluorescent probes, which allow detection of individual molecules with a simple microscope. Detection is then followed with very accuratemore » localization of the probe (with nanometer resolution) with respect to specific parts of the DNA or other proteins bound to the DNA. We have confirmed the precision of our measurement using another technique based on atomic force microscopy, which provides a nanometer-resolution topographic picture of a sample. Quantum dots and DNA are readily observable (and distinguishable) in the atomic force microscope, and can be simultaneously observed by fluorescence microscopy, allowing a direct comparison of the two methods. Precise nanometer-localization of protein binding sites using fluorescent quantum dots is thus a direct and visual method for physical mapping of transcription factor binding sites on whole genomes.« less
  • A spiral-wound membrane oxygen-enrichment system, designed in standard unit form, was assembled using membrane of current technology but in scaled-up dimensions. The system was operated on a radiant-tube annealing furnace to demonstrate that membrane oxygen enrichment is feasible in commercially interesting quantities. In a parallel development, the membrane was improved by decreasing the thickness of the separation barrier and thereby increasing the flux of oxygen-enriched air. The increase in gas flux significantly lowered the cost of oxygen in industrial quantities. In a similar development the spiral-wound element construction was improved by increasing the element diameter which increases membrane area andmore » reduces capital costs, and by reducing internal pressure drops which increase element efficiency. The current oxygen-enrichment system was evaluated and recommendations for an improved system were made. Finally, novel polymers for use in a membrane oxygen-enrichment system will be investigated. Candidate polymers will be evaluated in terms of several criteria including their film forming characteristics, their gas transport properties, their thermal stability and their compatibility with thin-film composite membrane technology.« less
  • Literature searches identified poly (vinyl isobutyl ether) as the most promising candidate barrier material for oxygen enrichment membranes. A membrane with an oxygen/nitrogen selectivity of 6.2 and a stability at 60/sup 0/C was developed. However, this membrane is fragile. Membranes using poly (2-hexyne) and poly (6-methyl-2-heptyne) were also made. (DLC)
  • IGCC coal-fired power plants show promise for environmentally-benign power generation. In these plants coal is gasified to syngas then processed in a water gas-shift (WGS) reactor to maximize the hydrogen/CO{sub 2} content. The gas stream can then be separated into a hydrogen rich stream for power generation and/or further purified for sale as a chemical and a CO{sub 2} rich stream for the purpose of carbon capture and storage (CCS). Today, the separation is accomplished using conventional absorption/desorption processes with post CO{sub 2} compression. However, significant process complexity and energy penalties accrue with this approach, accounting for ~20% of themore » capital cost and ~27% parasitic energy consumption. Ideally, a one-box process is preferred in which the syngas is fed directly to the WGS reactor without gas pre-treatment, converting the CO to hydrogen in the presence of H{sub 2}S and other impurities and delivering a clean hydrogen product for power generation or other uses. The development of such a process is the primary goal of this project. Our proposed "one-box" process includes a catalytic membrane reactor (MR) that makes use of a hydrogen-selective, carbon molecular sieve (CMS) membrane, and a sulfur-tolerant Co/Mo/Al{sub 2}O{sub 3} catalyst. The membrane reactor's behavior has been investigated with a bench top unit for different experimental conditions and compared with the modeling results. The model is used to further investigate the design features of the proposed process. CO conversion >99% and hydrogen recovery >90% are feasible under the operating pressures available from IGCC. More importantly, the CMS membrane has demonstrated excellent selectivity for hydrogen over H{sub 2}S (>100), and shown no flux loss in the presence of a synthetic "tar"-like material, i.e., naphthalene. In summary, the proposed "one-box" process has been successfully demonstrated with the bench-top reactor. In parallel we have successfully designed and fabricated a full-scale CMS membrane and module for the proposed application. This full-scale membrane element is a 3" diameter with 30"L, composed of ~85 single CMS membrane tubes. The membrane tubes and bundles have demonstrated satisfactory thermal, hydrothermal, thermal cycling and chemical stabilities under an environment simulating the temperature, pressure and contaminant levels encountered in our proposed process. More importantly, the membrane module packed with the CMS bundle was tested for over 30 pressure cycles between ambient pressure and >300 -600 psi at 200 to 300°C without mechanical degradation. Finally, internal baffles have been designed and installed to improve flow distribution within the module, which delivered 90% separation efficiency in comparison with the efficiency achieved with single membrane tubes. In summary, the full-scale CMS membrane element and module have been successfully developed and tested satisfactorily for our proposed one-box application; a test quantity of elements/modules have been fabricated for field testing. Multiple field tests have been performed under this project at National Carbon Capture Center (NCCC). The separation efficiency and performance stability of our full-scale membrane elements have been verified in testing conducted for times ranging from 100 to >250 hours of continuous exposure to coal/biomass gasifier off-gas for hydrogen enrichment with no gas pre-treatment for contaminants removal. In particular, "tar-like" contaminants were effectively rejected by the membrane with no evidence of fouling. In addition, testing was conducted using a hybrid membrane system, i.e., the CMS membrane in conjunction with the palladium membrane, to demonstrate that 99+% H{sub 2} purity and a high degree of CO{sub 2} capture could be achieved. In summary, the stability and performance of the full-scale hydrogen selective CMS membrane/module has been verified in multiple field tests in the presence of coal/biomass gasifier off-gas under this project. A promising process scheme has been developed for power generation and/or hydrogen coproduction with CCS based upon our proposed "one-box" process. Our preliminary economic analysis indicates about 10% reduction in the required electricity selling price and ~40% cost reduction in CCS on per ton CO{sub 2} can be achieved in comparison with the base case involving conventional WGS with a two-stage Selexsol® for CCS. Long term field tests (e.g., >1,000 hrs) with the incorporation of the catalyst for the WGS membrane reactor and more in-depth analysis of the process scheme are recommended for the future study.« less
  • This research project involved the development of mathematical models for analysis, synthesis, and simulation of large systems of interacting devices. The work was motivated by problems that may become important in high-density VLSI chips with characteristic feature sizes less than 1 micron: it is anticipated that interactions of neighboring devices will play an important role in the determination of circuit properties. It is hoped that the combination of high device densities and such local interactions can somehow be exploited to increase circuit speed and to reduce power consumption. To address these issues from the point of view of system theory,more » research was pursued in the areas of nonlinear and stochastic systems and into neural-network models. Statistical models were developed to characterize various features of the dynamic behavior of interacting systems. Random-process models for studying the resulting asynchronous modes of operation were investigated. The local interactions themselves may be modeled as stochastic effects. The resulting behavior was investigated through the use of various scaling limits, and by a combination of other analytical and simulation techniques. Techniques arising in a variety of disciplines where models of interaction have been formulated and explored were considered and adapted for use.« less