skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: IDAHO BIODIESEL INFRASTRUCTURE PROJECT DOE'S INITIATIVE ON COOPERATIVE PROGRAMS WITH STATES FOR RESEARCH, DEVELOPMENT AND DEMONSTRATION GRANT NO. DE-FC36-02GO12021. Final report

Abstract

The Idaho Energy Division issued a Request for Proposal (RFP) on March 14, 2006, inviting qualified licensed fuel wholesalers, fuel retailers, and vehicle fleet operators to provide proposals to construct and/or install infrastructure for biodiesel utilization in Idaho. The intent was to improve the ability of private and/or non-Federal public entities in Idaho to store, transport, or offer for sale biodiesel within the state. The RFP provided up $100,000 for co-funding the projects with a minimum 50% cash cost match. Four contracts were subsequetnly awarded that resulted in three new bidodiesel storage facilities immediately serving about 45 fueling stations from Sandpoint to Boise. The project also attracted considerable media attention and Idaho became more knowledgeable about biodiesel.

Authors:
Publication Date:
Research Org.:
IDAHO DEPARTMENT OF WATER RESOURCES
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
896914
Report Number(s):
1
TRN: US200721%%178
DOE Contract Number:
FC36-02GO12021
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
09 BIOMASS FUELS; IDAHO; RESELLERS; RETAILERS; SALES; STORAGE FACILITIES; TRANSPORT; BIOFUELS

Citation Formats

CROCKETT, JOHN. IDAHO BIODIESEL INFRASTRUCTURE PROJECT DOE'S INITIATIVE ON COOPERATIVE PROGRAMS WITH STATES FOR RESEARCH, DEVELOPMENT AND DEMONSTRATION GRANT NO. DE-FC36-02GO12021. Final report. United States: N. p., 2006. Web. doi:10.2172/896914.
CROCKETT, JOHN. IDAHO BIODIESEL INFRASTRUCTURE PROJECT DOE'S INITIATIVE ON COOPERATIVE PROGRAMS WITH STATES FOR RESEARCH, DEVELOPMENT AND DEMONSTRATION GRANT NO. DE-FC36-02GO12021. Final report. United States. doi:10.2172/896914.
CROCKETT, JOHN. Sun . "IDAHO BIODIESEL INFRASTRUCTURE PROJECT DOE'S INITIATIVE ON COOPERATIVE PROGRAMS WITH STATES FOR RESEARCH, DEVELOPMENT AND DEMONSTRATION GRANT NO. DE-FC36-02GO12021. Final report". United States. doi:10.2172/896914. https://www.osti.gov/servlets/purl/896914.
@article{osti_896914,
title = {IDAHO BIODIESEL INFRASTRUCTURE PROJECT DOE'S INITIATIVE ON COOPERATIVE PROGRAMS WITH STATES FOR RESEARCH, DEVELOPMENT AND DEMONSTRATION GRANT NO. DE-FC36-02GO12021. Final report},
author = {CROCKETT, JOHN},
abstractNote = {The Idaho Energy Division issued a Request for Proposal (RFP) on March 14, 2006, inviting qualified licensed fuel wholesalers, fuel retailers, and vehicle fleet operators to provide proposals to construct and/or install infrastructure for biodiesel utilization in Idaho. The intent was to improve the ability of private and/or non-Federal public entities in Idaho to store, transport, or offer for sale biodiesel within the state. The RFP provided up $100,000 for co-funding the projects with a minimum 50% cash cost match. Four contracts were subsequetnly awarded that resulted in three new bidodiesel storage facilities immediately serving about 45 fueling stations from Sandpoint to Boise. The project also attracted considerable media attention and Idaho became more knowledgeable about biodiesel.},
doi = {10.2172/896914},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sun Dec 31 00:00:00 EST 2006},
month = {Sun Dec 31 00:00:00 EST 2006}
}

Technical Report:

Save / Share:
  • The supercritical water-cooled reactor (SCWR) is one of the six reactor technologies selected for research and development under the Generation IV program. SCWRs are promising advanced nuclear systems because of their high thermal efficiency (i.e., about 45% versus about 33% efficiency for current Light Water Reactors [LWRs]) and considerable plant simplification. SCWRs are basically LWRs operating at higher pressure and temperatures with a direct once-through cycle. Operation above the critical pressure eliminates coolant boiling, so the coolant remains single-phase throughout the system. Thus, the need for a pressurizer, steam generators, steam separators, and dryers is eliminated. The main mission ofmore » the SCWR is generation of low-cost electricity. It is built upon two proven technologies: LWRs, which are the most commonly deployed power generating reactors in the world, and supercritical fossil-fired boilers, a large number of which are also in use around the world. The reference SCWR design for the U.S. program is a direct cycle system operating at 25.0 MPa, with core inlet and outlet temperatures of 280 and 500 C, respectively. The coolant density decreases from about 760 kg/m3 at the core inlet to about 90 kg/m3 at the core outlet. The inlet flow splits with about 10% of the inlet flow going down the space between the core barrel and the reactor pressure vessel (the downcomer) and about 90% of the inlet flow going to the plenum at the top of the rector pressure vessel, to then flow down through the core in special water rods to the inlet plenum. Here it mixes with the feedwater from the downcomer and flows upward to remove the heat in the fuel channels. This strategy is employed to provide good moderation at the top of the core. The coolant is heated to about 500 C and delivered to the turbine. The purpose of this NERI project was to assess the reference U.S. Generation IV SCWR design and explore alternatives to determine feasibility. The project was organized into three tasks: Task 1. Fuel-cycle Neutronic Analysis and Reactor Core Design Task 2. Fuel Cladding and Structural Material Corrosion and Stress Corrosion Cracking Task 3. Plant Engineering and Reactor Safety Analysis. moderator rods. materials.« less
  • Initiative to increase acceptance of biodiesel in petroleum pipelines
  • FEDIX is an on-line information retrieval service of federal opportunities for colleges and universities supported by multiple federal agencies as an outreach tool to promote enhanced communication to colleges, universities, and other educational and research organizations regarding federal research, and educational opportunities. Multiple attachments include several annual progress reports, a listing of sample FEDIX outreach meetings and conferences, results from user satisfaction surveys, usage statistics, and FEDIX handouts.
  • This report serves to summarize the major activities completed as part of Virginia Electric and Power Company's North Anna construction and operating license demonstration project with DOE. Project successes, lessons learned, and suggestions for improvement are discussed. Objectives of the North Anna COL project included preparation and submittal of a COLA to the USNRC incorporating ESBWR technology for a third unit a the North Anna Power Station site, support for the NRC review process and mandatory hearing, obtaining NRC approval of the COLA and issuance of a COL, and development of a business case necessary to support a decision onmore » building a new nuclear power plant at the North Anna site.« less
  • Improved models of contaminant migration in heterogeneous, variably saturated porous media are required to better define the long-term stewardship requirements for U.S. Department of Energy (DOE) lands and to assist in the design of effective vadose-zone barriers to contaminant migrations. The development of these improved models requires field and laboratory results to evaluate their efficacy. However, controlled laboratory experiments simulating vadose conditions can require extensive period of time, and often are conducted at condition near saturation rather than the much drier conditions common in many contaminated arid vadose zone sites. Collaborative research undertaken by the Idaho National Laboratory (INL) andmore » the University of Idaho as part of this Environmental Management Science Program project focused on the development and evaluation of geocentrifuge techniques and equipment that allows vadose zone experiments to be conducted for relevant conditions in time frames not possible in conventional bench top experiments. A key and novel aspect of the research was the use of the 2-meter radius geocentrifuge capabilities at the Idaho National Laboratory to conduct unsaturated transport experiments. Specifically, the following activities were conducted ** Reviewing of the theory of unsaturated flow in the geocentrifuge to establish the range of centrifuge accelerations/experimental conditions and the translation of centrifuge results to 1 gravity applications. ** Designing, constructing, and testing of in-flight experimental apparatus allowing the replication of traditional bench top unsaturated transport experiments on the geocentrifuge. ** Performing unsaturated 1-dimenstional column geocentrifuge experiments using conservative tracers to evaluate the effects of increased centrifugal acceleration on derived transport properties and assessing the scaling relationships for these properties. Because the application of geocentrifuge techniques to vadose transport is in its infancy experimental apparatus such as pumps, flow meters, columns, fraction collectors, etc. that would reliably function under the increased self weight experienced on the centrifuge had to be developed and tested as part of this project. Although, we initially planed to conduct experiments using reactive tracer and 2-dimensional heterogeneities, the cost and time associated with designing, building, and testing of experimental apparatus limited our experimental program to conservative tracer experiments using 1-dimensional columns. The results we obtained in this study indicate that the geocentrifuge technique is a viable experimental method for the study of subsurface processes where gravitational acceleration is important. The geocentrifuge allows experiments to be completed more quickly than tests conducted at 1-g, can be used to experimentally address important scaling issues, and permits experiments under a range of conditions that would be difficult or impossible using conventional approaches. The application of the geocentrifuge approaches and associated models developed in this project allows more meaningful investigation of DOE relevant vadose-zone issues under scalable conditions in time frames previously not obtainable.« less