In-Situ Sampling and Characterization of Naturally Occurring Marine Methane Hydrate Using the D/V JOIDES Resolution
The primary accomplishments of the JOI Cooperative Agreement with DOE/NETL in this quarter were the implementation of a scientific ocean drilling expedition to study marine methane hydrates along the Cascadia margin, in the NE Pacific as part of Integrated Ocean Drilling Program (IODP) Expedition 311 using the R/V JOIDES Resolution and the deployment of all required equipment and personnel to provide the required services during this expedition. IODP Expedition 311 shipboard activities on the JOIDES Resolution began on August 28 and were concluded on October 28, 2005. New ODP Pressure Coring System (PCS) aluminum autoclave chambers were fabricated prior to the expedition. During the expedition, 16 PCS autoclaves containing pressure cores were X-rayed before and after depressurization using a modified Geotek MSCL-P (multi-sensor core logger-pressure) system. These PCS cores were density scanned using the MSCL-V (multi-sensor core logger-vertical) during depressurization to monitor gas evolution. The MSCL-V was set up in a 20-foot-long refrigerated container provided by Texas A&M University through the JOI contract with TAMRF. IODP Expedition 311 was the first time that PCS cores were examined before (using X-ray), during (using MSCL-V gamma density) and after (using X-ray) degassing to determine the actual volume and distribution of sediment and gas hydrate in the pressurized core, which will be important for more accurate determination of mass balances between sediment, gas, gas hydrate, and fluids in the samples collected. Geotek, Ltd was awarded a contract by JOI to provide equipment and personnel to perform pressure coring and related work on IODP Expedition 311 (Cascadia Margin Gas Hydrates). Geotek, Ltd. provided an automated track for use with JOI's infrared camera systems. Four auxiliary monitors showed infrared core images in real time to aid hydrate identification and sampling. Images were collected from 185 cores during the expedition and processed to provide continuous core temperature data. The HYACINTH pressure coring tools, subsystems, and core logging systems were mobilized to Astoria, Oregon. Both HYACINTH pressure coring tools, the HRC (HYACE Rotary Corer) and the FPC (Fugro Pressure Corer) were mobilized and used during the expedition. Two HYACINTH engineers supervised the use of the tools and five good pressure cores were obtained. Velocity, density and X-ray linear scanning data were collected from these cores at near in situ pressure using the MSCL-P system. Dr. Barry Freifeld from Lawrence Berkeley National Laboratory provided an X-ray source and detector for X-ray imaging of pressure cores and helped Geotek with the design and mobilization of the MSCL-P system. Pressure core handling, transfer, and logging was performed in a refrigerated 20-foot container supplied by Geotek, Ltd. After scanning, the pressure cores were stored for on-shore analysis in aluminum barrels. Additional studies were conducted at the Pacific Geoscience Center (PGC), where a shore based laboratory was established after Expedition 311.
- Research Organization:
- Joint Oceanograph Institutions
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- FC26-01NT41329
- OSTI ID:
- 896502
- Country of Publication:
- United States
- Language:
- English
Similar Records
IN-SITU SAMPLING AND CHARACTERIZATION OF NATURALLY OCCURRING MARINE METHANE HYDRATE USING THE D/V JOIDES RESOLUTION
In-Situ Sampling and Characterization of Naturally Occurring Marine Methane Hydrate Using the D/V JOIDES Resolution