Burst Martensitic Transformations in a Steel and in a Pu-Ga Alloy
Upon cooling a Pu-2.0 at% Ga alloy from the ambient temperature, the metastable delta phase partially transforms martensitically to the alpha-prime phase. Because this transformation involves a 25% volume contraction, plastic accommodation by the delta matrix must occur. When the material is isochronally heated or isothermally annealed above ambient temperatures, the reversion of alpha-prime to delta is likely to occur by the alpha-prime/delta interface moving to consume the alpha-prime particles. This reversion exhibits a burst martensitic mode and is observed as sharp spikes in differential scanning calorimetry data and as steps in resistometry data. These large bursts appear to be the result of an interplay between the autocatalytically driven transformation of individual alpha-prime particles and self-quenching caused by small changes in temperature and/or stress accompanying each burst. The behavior of this Pu-Ga alloy is compared to that of a steel referred to as a ''burst martensite'' in the literature, which also exhibits bursts during both thermal cycling and isothermal holds.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 878621
- Report Number(s):
- UCRL-PROC-212961; TRN: US200611%%367
- Resource Relation:
- Conference: Presented at: Solid-Solid Phase Transformations in Inorganic Materials, Phoenix, AZ, United States, May 29 - Jun 03, 2005
- Country of Publication:
- United States
- Language:
- English
Similar Records
"Burst-like" Characteristics of the delta/alpha-prime Phase Transformation in Pu-Ga Alloys
Delta/Alpha-Prime Phase Transformations in a Pu-Ga Alloy