skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Cleaning of aluminum after machining with coolants

Abstract

An x-ray photoemission spectroscopic study was undertaken to compare the cleaning of the Advanced Photon Source (APS) aluminum extrusion storage ring vacuum chambers after machining with and without water soluble coolants. While there was significant contamination left by the coolants, the cleaning process was capable of removing the residue. The variation of the surface and near surface composition of samples machined either dry or with coolants was negligible after cleaning. The use of such coolants in the machining process is therefore recommended.

Authors:
Publication Date:
Research Org.:
Argonne National Lab., IL (United States)
Sponsoring Org.:
USDOE, Washington, DC (United States)
OSTI Identifier:
87847
Report Number(s):
LS-172
ON: DE95015226; TRN: 95:017835
DOE Contract Number:
W-31-109-ENG-38
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: [1995]
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; 36 MATERIALS SCIENCE; ADVANCED PHOTON SOURCE; PRESSURE VESSELS; SURFACE CLEANING; ALUMINIUM ALLOYS; ALUMINIUM; PHOTOEMISSION; X-RAY SPECTROSCOPY; VACUUM SYSTEMS; MACHINING

Citation Formats

Roop, B. Cleaning of aluminum after machining with coolants. United States: N. p., 1995. Web. doi:10.2172/87847.
Roop, B. Cleaning of aluminum after machining with coolants. United States. doi:10.2172/87847.
Roop, B. Sat . "Cleaning of aluminum after machining with coolants". United States. doi:10.2172/87847. https://www.osti.gov/servlets/purl/87847.
@article{osti_87847,
title = {Cleaning of aluminum after machining with coolants},
author = {Roop, B.},
abstractNote = {An x-ray photoemission spectroscopic study was undertaken to compare the cleaning of the Advanced Photon Source (APS) aluminum extrusion storage ring vacuum chambers after machining with and without water soluble coolants. While there was significant contamination left by the coolants, the cleaning process was capable of removing the residue. The variation of the surface and near surface composition of samples machined either dry or with coolants was negligible after cleaning. The use of such coolants in the machining process is therefore recommended.},
doi = {10.2172/87847},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Sat Jul 01 00:00:00 EDT 1995},
month = {Sat Jul 01 00:00:00 EDT 1995}
}

Technical Report:

Save / Share: