skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications

Abstract

An innovative reactor core design based on advanced, mixed carbide fuels was analyzed for nuclear space power applications. Solid solution, mixed carbide fuels such as (U,Zr,Nb)c and (U,Zr, Ta)C offer great promise as an advanced high temperature fuel for space power reactors.

Authors:
; ; ;
Publication Date:
Research Org.:
University of Florida (US)
Sponsoring Org.:
(US)
OSTI Identifier:
828620
Report Number(s):
DOE/ID/14116
TRN: US0404041
DOE Contract Number:
FG07-01ID14116
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 11 Aug 2004
Country of Publication:
United States
Language:
English
Subject:
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; 21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS; DESIGN; MIXED CARBIDE FUELS; PROPULSION; REACTOR CORES; SOLID SOLUTIONS; SPACE POWER REACTORS; NESDPS Office of Nuclear Energy Space and Defense Power Systems

Citation Formats

Samim Anghaie, Travis W. Knight, Johann Plancher, and Reza Gouw. Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications. United States: N. p., 2004. Web. doi:10.2172/828620.
Samim Anghaie, Travis W. Knight, Johann Plancher, & Reza Gouw. Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications. United States. doi:10.2172/828620.
Samim Anghaie, Travis W. Knight, Johann Plancher, and Reza Gouw. 2004. "Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications". United States. doi:10.2172/828620. https://www.osti.gov/servlets/purl/828620.
@article{osti_828620,
title = {Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications},
author = {Samim Anghaie and Travis W. Knight and Johann Plancher and Reza Gouw},
abstractNote = {An innovative reactor core design based on advanced, mixed carbide fuels was analyzed for nuclear space power applications. Solid solution, mixed carbide fuels such as (U,Zr,Nb)c and (U,Zr, Ta)C offer great promise as an advanced high temperature fuel for space power reactors.},
doi = {10.2172/828620},
journal = {},
number = ,
volume = ,
place = {United States},
year = 2004,
month = 8
}

Technical Report:

Save / Share:
  • A modular, multi-reactor power system and vehicle configuration for piloted nuclear electric propulsion (NEP) missions to Mars is presented. Such a design could provide enhanced system and mission reliability, allowing a comfortable safety margin for early manned flights, and would allow a range of piloted and cargo missions to be performed with a single power system design. Early use of common power modules for cargo missions would also provide progressive flight experience and validation of standardized systems for use in later piloted applications. System and mission analysis are presented to compare single and multi-reactor configurations for piloted Mars missions. Amore » conceptual design for the Hydra modular multi-reactor NEP vehicle is presented.« less
  • Any reactor that utilizes fuel consisting of a fissile material in a gaseous state may be referred to as a gaseous core reactor (GCR). Studies on GCRs have primarily been limited to the conceptual phase, mostly due to budget cuts and program cancellations in the early 1970's. A few scientific experiments have been conducted on candidate concepts, primarily of static pressure fissile gas filling a cylindrical or spherical cavity surrounded by a moderating shell, such as beryllium, heavy water, or graphite. The main interest in this area of nuclear power generation is for space applications. The interest in space applicationsmore » has developed due to the promise of significant enhancement in fuel utilization, safety, plant efficiency, special high-performance features, load-following capabilities, power conversion optimization, and other key aspects of nuclear power generation. The design of a successful GCR adapted for use in space is complicated. The fissile material studied in the pa st has been in a fluorine compound, either a tetrafluoride or a hexafluoride. Both of these molecules have an impact on the structural material used in the making of a GCR. Uranium hexafluoride as a fuel allows for a lower operating temperature, but at temperatures greater than 900K becomes essentially impossible to contain. This difficulty with the use of UF6 has caused engineers and scientists to use uranium tetrafluoride, which is a more stable molecule but has the disadvantage of requiring significantly higher operating temperatures. Gas core reactors have traditionally been studied in a steady state configuration. In this manner a fissile gas and working fluid are introduced into the core, called a cavity, that is surrounded by a reflector constructed of materials such as Be or BeO. These reactors have often been described as cavity reactors because the density of the fissile gas is low and criticality is achieved only by means of the reflector to reduce neutron leakage from the core. Still there are problems of containment since many of the proposed vessel materials such as W or Mo have high neutron cross sections making the design of a critical system difficult. There is also the possibility for a GCR to remain in a subcritical state, and by the use of a shockwave mechanism, increase the pressure and temperature inside the core to achieve criticality. This type of GCR is referred to as a shockwave-driven pulsed gas core reactor. These two basic designs were evaluated as advance concepts for space power and propulsion.« less
  • PNL's 1986 activities can be divided into three basic areas: code assessment, correlation assessment and experimental activities. The ultimate goal of all these activities is developing computer codes and verifying their use to perform the thermal-hydraulic analysis and design of the reactor core and plenum of the various proposed concepts. To perform this task as assessment is made of existing computer codes, models, correlations, and microgravity experimental data.
  • From American Nuclear Society Meeting, New York, Nov. 1963. Progress is reported in several areas of development of fueled graphite containing coated particles for nonpurged gas-cooled reactor systems. The sol-gel process has been modified for making spherical particles of both thorium-uranium carbide and thorium-uranium oxide suitable for coating. Equipment has been assembled and methods have been developed for deposition of pyrolytic-carbon coatings under well-controlled conditions. Damage to coated particles during fabrication into a graphite matrix depends on the molding pressure and the volumetric content of coated particles. Vendor-supplied coated particles and fueled graphite spheres have been evaluated extensively in bothmore » inand out-of-reactor tests. Duplex- and triplex-coated particles have excellent fission-gas retention at 2050 deg F to burnups of l5 at.%, and one triplex sample has also shown good retention at 2500 deg F to 20 at.% burnup. Fueled graphite spheres containing coated particles have good irradiation performance, but the fission-gas release rates are somewhat higher than for unsupported coated particles. Fueled graphite spheres react with water vapor about as rapidiy as do Speer Mod-2 and ATJ grades of graphite. The diffusion rates in pyrolytic carbon are the same for uranium, thorium, and protactinium. The diffusion rates in the direction parallel to the deposition plane are much higher than those in the perpendicular direction. (auth)« less