Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program
The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAO's). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the drummed waste PDP, a simulated waste container consists of a 55-gallon matrix drum emplaced with radioactive standards and fabricated matrix inserts. These PDP sample components are distributed to the participating measurement facilities that have been designated and authorized by the Carlsbad Field Office (CBFO). The NDA Drum PDP materials are stored at these sites under secure conditions to protect them from loss, tampering, or accidental damage. Using removable PDP radioactive standards, isotopic activities in the simulated waste containers are varied to the extent possible over the range of concentrations anticipated in actual waste characterization situations. Manufactured matrices simulate expected waste matrix conditions and provide acceptable consistency in the sample preparation process at each measurement facility. Analyses that are required by the Waste Isolation Pilot Plant (WIPP) to demonstrate compliance with various regulatory requirements and that are included in the PDP may only be performed by measurement facilities that demonstrate acceptable performance in the PDP. These analyses are referred to as WIPP analyses, and the wastes on which they are performed are referred to as WIPP wastes in this document.
- Research Organization:
- Waste Isolation Pilot Plant, Carlsbad, NM (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- 04-01AL66444
- OSTI ID:
- 815185
- Report Number(s):
- DOE/CBFO 01-1005; TRN: US0304881
- Resource Relation:
- Other Information: PBD: 6 Apr 2001
- Country of Publication:
- United States
- Language:
- English
Similar Records
Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program
Performance Demonstration Program Plan for Analysis of Simulated Headspace Gases
Related Subjects
ALPHA-BEARING WASTES
COMPLIANCE
CONTAINERS
DEMONSTRATION PROGRAMS
EVALUATION
MATRICES
PERFORMANCE
QUALITY ASSURANCE
RELIABILITY
SAMPLE PREPARATION
TESTING
WASTES
WIPP
DEMONSTRATION
DRUM
WASTE
NONDESTRUCTIVE ASSAY
NDA
TRU
CHARACTERIZATION
CYCLE
DOE
WIPP: DISPOSAL
TEST
WAC
WAP
QAPD
QAO
RADIOACTIVE
REGULATORY
REQUIREMENTS