DESIGN, FABRICATION, INSTALLATION AND TESTING OF IN-VESSEL CONTROL COILS FOR DIII-D
OAK A271 DESIGN, FABRICATION, INSTALLATION AND TESTING OF IN-VESSEL CONTROL COILS FOR DIII-D. Since 1995, DIII-D has performed correction of magnetic field imperfections using a set of six external picture frame coils located on the vessel mid-plane. Recently, these coils have also demonstrated significant benefits when used for feedback of the resistive wall mode, an instability that limits the plasma performance at high beta. Modeling has shown that substantial performance improvements can be achieved by installing new coils inside the vessel and expanding the poloidal coverage above and below the mid-plane. Two prototype internal coils were installed in 2001 and have been tested successfully. installation of a set of twelve internal coils and magnetic sensors in the DIII-D tokamak is to be completed in December 2002. The design requirement for the new coil system was to maximize the magnetic field at the plasma edge, operate with a frequency range of dc to 1000 Hz, and fit behind the existing graphite wall tiles. The coil design adopted and installed is a water-cooled hollow copper conductor insulated with polyamide and housed inside a stainless steel tube that forms a vacuum boundary. The coil is rigidly mounted to the inside of the vacuum vessel. The primary challenge in the design of these coils was in joining of both the copper conductor and the stainless tube without overheating the polyamide insulator.
- Research Organization:
- General Atomics, San Diego, CA (United States)
- Sponsoring Organization:
- (US)
- DOE Contract Number:
- AC03-99ER54463
- OSTI ID:
- 813650
- Resource Relation:
- Conference: THIS IS A PREPRINT OF A PAPER PRESENTED AT THE 22ND SYMPOSIUM ON FUSION TECHNOLOGY, HELSINKI (FI), 09/09/2002--09/13/2002; Other Information: THIS PREPRINT WILL BE PUBLISHED IN FUSION ENGINEERING AND DESIGN.; PBD: 1 Oct 2002
- Country of Publication:
- United States
- Language:
- English
Similar Records
MANUFACTURING OF MAGNETIC PROBE COILS FOR DIII-D
NSTX-U In-Vessel Control Coils’ Design Concept