DEVELOPMENT OF MESOPOROUS MEMBRANE MATERIALS FOR CO2 SEPARATION
The huge emissions of carbon dioxide from fossil fuel fired power plants and industrial plants over the last century have resulted in an increase of the atmospheric carbon dioxide concentration. Climatological modeling work has predicted severe climate disruption as a result of the trapping of heat due to CO{sub 2}. As an attempt to address this global warming effect, DOE has initiated the Vision 21 concept for future power plants. We first synthesized mesoporous aluminosilicates that have high surface area and parallel pore channels for membrane support materials. Later we synthesized microporous aluminosilicates as the potential thin membrane materials for selective CO{sub 2} adsorption. The pore size is controlled to be less that 1 nm so that the adsorption of CO{sub 2} on the pore wall will block the passage of N{sub 2}. Mesoporous and precipitated alumina were synthesized as the base material for CO{sub 2} adsorbent. The porous alumina is doped with Ba to enhance its CO{sub 2} affinity due to the basicity of Ba. It is shown by gas chromatograph (GC) that the addition of Ba enhances the separation CO{sub 2} from N{sub 2}. It was found that mesoporous alumina has larger specific surface area and better selectivity of CO{sub 2} than precipitated alumina. Ba improves the affinity of mesoporous alumina with CO{sub 2}. Phase may play an important role in selective adsorption of CO{sub 2}. It is speculated that mesoporous alumina is more reactive than precipitated alumina creating the xBaO {center_dot}Al{sub 2}O{sub 3} phase that may be more affinitive to CO{sub 2} than N{sub 2}. On the other hand, the barium aluminates phase (Ba{sub 3}Al{sub 2}O{sub 6}) in the mesoporous sample does not help the adsorption of CO{sub 2}. Microporous aluminosilicate was chosen as a suitable candidate for CO{sub 2}/N{sub 2} separation because the pore size is less than 10 {angstrom}. If a CO{sub 2} adsorbent is added to the microporous silica, the adsorption of CO{sub 2} can block the passage of N{sub 2} and an effective CO{sub 2}/N{sub 2} separator will be found. It was first demonstrated that microporous silica could be synthesized. The microporous silica was then impregnated with Ba(OH){sub 2}. No adsorption of CO{sub 2} was observed. It was found that alumina must be added to facilitate CO{sub 2} adsorption. However, no microporous aluminosilicates have been shown before. We developed a process that partially coat alumina on microporous silica. It was demonstrated that microporous aluminosilicates can be obtained by the coating process and a candidate material for selective CO{sub 2} separation is available.
- Research Organization:
- Drexel University (US)
- Sponsoring Organization:
- (US)
- DOE Contract Number:
- FG26-00NT40823
- OSTI ID:
- 812171
- Resource Relation:
- Other Information: PBD: 25 Mar 2003
- Country of Publication:
- United States
- Language:
- English
Similar Records
DEVELOPMENT OF MESOPOROUS MEMBRANE MATERIALS FOR CO2 SEPARATION
DEVELOPMENT OF MESOPOROUS MEMBRANE MATERIALS FOR CO2 SEPARATION